Audiolite doesn't need qcom audio driver so remove it from compilation.
Change-Id: I3bc12b9051fe987fbde087ff6f505029337c5352
Signed-off-by: Kogara Naveen Kumar <quic_nkogara@quicinc.com>
added 1msec delay before resetting FS cntrl, to ensure no
glitch at the start of VI feedback.
Change-Id: Ia9ae296f336e4deb4b8bedb718316a6772466a95
Signed-off-by: sarath varma ganapathiraju <quic_ganavarm@quicinc.com>
mark OTP_0 register as read register instead of read and write.
Change-Id: I666c388ba10cd00daf8ac902e0b05177503b1e26
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Add compilation support for volcano, includes
wcd9378 driver compilation, and add dedicated
configs for volcano which has different swr
version.
Change-Id: I8dffbe72ed524fcaaad8c9e65c7c993ad9678ae1
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
System gain is miscalculated due to incorrect parsing of
device tree property. Correct the parsing logic of the
system gain device tree property.
Change-Id: I8c9c5198a139a69c2d5d9520a071123261b0581f
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
To enable datapath control for both HPH_L and HPH_R in
HPH sequencer. Which is used to fix the single channel
mute issues.
Change-Id: I1d9fb22255a2895fc2543ef5c3de02f0bdb9999d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Soundcard name might need to be modified based on adsp
sku variants. Add support to read the adsp variant from
nvmem and set the soundcard name.
Change-Id: I2ab0cef6f90a4dd512f736aa6b4540b21a74e917
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
Use rproc_set_firmware API to load ADSP dtb firmware using
image name when adsp_dbt_name is set based on
fuse variant.
Change-Id: If5c592f160585871165d5c047e1c5acc59bfe1c1
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
-add support for swr version 1p7.
-Return 0 instead of EBUSY during swrm_suspend to
allow system to enter suspend without rx swrm
preventing it.
- Update proper reg value during pcm port config.
Change-Id: Id42d3625a0609507fffc92b650cfae92b0e1dc4f
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
Update dai link structure properly for btfm dai links.
Change-Id: Ic82ba458d92c94cd668d1f8f0e4431eae31f7d5a
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Move scp1_val and scp2_val into swr_device struct and
reset this two value after ssr.
Change-Id: I549f7438f034a2de0e556bd749594fbe5db2a21e
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
updated sleep time to 80us from 20us after updating the
reset gpio pin from sleep to active state to give ample time
for HW to reset the pin state to active, to resolve the
component registration issue which is seen on stability
runs.
Change-Id: Icd13bf36d56906553352e595d07e478c23d1c13d
Signed-off-by: sarath varma ganapathiraju <quic_ganavarm@quicinc.com>
Clk vote is present after teardown the usecase. which
is impacting the power, in SND_PMD call swr disconnect
to avoid clk votes.
Change-Id: I94d1ab9dc19a62132033a5715d4212dbcb7d2b0b
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
from Linux version(>= 5.10) for disabling the irq need
irq_set_irq_wake() along with disable_irq_nosync(). Only
disable_irq_nosync() not allows IQRs to fully disable.
Change-Id: I4eb18ec0d6b96cdb11dcc35d847fefb0ed59cc82
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
update the codec digital RX clk rate to 9P6MHZ or
11P2896MHz depends on usecase.
Change-Id: I1c7167c10ef8bcdba876be265ef90d980f822d03
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
When early down happens ADSP is down and APPS is trying to render audio
to ADSP continuously in impression that DSP is Up until APPS get down
notification. In some scenarios the time taken b/w early down to down
taking more time than expected. This longer times may cause block in
printk and other system hogging. So add support to listen early down
to do avoid such issues.
Change-Id: I798265d682e2d93ae889a514eb3a2022afa73196
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Increase TDM interface max ch to 32 and max rate to 96kHz.
Change-Id: Icaabacff20bc08d98e0f4a6b47feaf8c09aee585
Signed-off-by: peizhong <quic_peizhong@quicinc.com>
Defer the probe when the msm cdc pinctrl driver is not prode.
Change-Id: I3ace42632601a8ef010363f23534471e99c0f827
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Optimize the power down logic of hph playback widget.
Change-Id: Ic6d085e70cb36cdc99bcbceddbce3aff2bc54ad6
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
