Audiolite doesn't need qcom audio driver so remove it from compilation.
Change-Id: I3bc12b9051fe987fbde087ff6f505029337c5352
Signed-off-by: Kogara Naveen Kumar <quic_nkogara@quicinc.com>
Update the micbias enable logic for tambora,
and add some widgets to switch between amic and
va amic.
Change-Id: I2c9a7658d79a7c9d255884df7b81aa8062185d72
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
Initialize right WSA when wsa_max_dev is 1, by default
when wsa max dev is 1, left wsa is initialized but when
left wsa is not enabled, Initialize Right wsa.
Change-Id: Id00813ee2d3c7c4e847656c786da2800f05ca5b3
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
Remove test reg configuration from init_reg func to
avoid pop noise in hph playback with comp enable.
Change-Id: I7c49d224e92c28cfdd2e971095ac5e6fa6db14c9
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
enable swr comp port. but not set any DRE
related registers unless comp switch is
set from the mixers.
Change-Id: I57b45bb504f0851aed90521e20a94fcb359b29ff
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
added 1msec delay before resetting FS cntrl, to ensure no
glitch at the start of VI feedback.
Change-Id: Ia9ae296f336e4deb4b8bedb718316a6772466a95
Signed-off-by: sarath varma ganapathiraju <quic_ganavarm@quicinc.com>
mark OTP_0 register as read register instead of read and write.
Change-Id: I666c388ba10cd00daf8ac902e0b05177503b1e26
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Add support for BT Soundwire port configurations.
Add support for flow control modes for fractional channel rates.
Configure slave side data ports for flow controls modes.
Fix the direction adn offset1 fields for Tx ports on BT Soundwire.
When the flow control mode is not required,
update the slave configuration accordingly.
Sample Interval HIGH field in slave port controls needs to be
reset to zero when Sample Interval value is less than 255.
Avoid clock stop mode for bt swr slave during runtime suspend call.
In case of fractional sampling rates, additional offset bits need
to be added between samples to carry flow control information.
Change-Id: If023946f62c5157119836cf43e8542cfd6e0ce16
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Add compilation support for volcano, includes
wcd9378 driver compilation, and add dedicated
configs for volcano which has different swr
version.
Change-Id: I8dffbe72ed524fcaaad8c9e65c7c993ad9678ae1
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
System gain is miscalculated due to incorrect parsing of
device tree property. Correct the parsing logic of the
system gain device tree property.
Change-Id: I8c9c5198a139a69c2d5d9520a071123261b0581f
Signed-off-by: Phani Kumar Uppalapati <quic_phaniu@quicinc.com>
To enable datapath control for both HPH_L and HPH_R in
HPH sequencer. Which is used to fix the single channel
mute issues.
Change-Id: I1d9fb22255a2895fc2543ef5c3de02f0bdb9999d
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
Soundcard name might need to be modified based on adsp
sku variants. Add support to read the adsp variant from
nvmem and set the soundcard name.
Change-Id: I2ab0cef6f90a4dd512f736aa6b4540b21a74e917
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
Use rproc_set_firmware API to load ADSP dtb firmware using
image name when adsp_dbt_name is set based on
fuse variant.
Change-Id: If5c592f160585871165d5c047e1c5acc59bfe1c1
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
-add support for swr version 1p7.
-Return 0 instead of EBUSY during swrm_suspend to
allow system to enter suspend without rx swrm
preventing it.
- Update proper reg value during pcm port config.
Change-Id: Id42d3625a0609507fffc92b650cfae92b0e1dc4f
Signed-off-by: Sarath Varma Ganapathiraju <quic_ganavarm@quicinc.com>
Implement driver module for BT Soundwire master.
Implement support for SSR and PDR handling for BT Soundwire use case.
Change-Id: Ibc7818a08a2f65fe47311daffc03a017fbac77e3
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Update dai link structure properly for btfm dai links.
Change-Id: Ic82ba458d92c94cd668d1f8f0e4431eae31f7d5a
Signed-off-by: Vangala, Amarnath <quic_avangala@quicinc.com>
Move scp1_val and scp2_val into swr_device struct and
reset this two value after ssr.
Change-Id: I549f7438f034a2de0e556bd749594fbe5db2a21e
Signed-off-by: Yuhui Zhao <quic_yuhuzhao@quicinc.com>
updated sleep time to 80us from 20us after updating the
reset gpio pin from sleep to active state to give ample time
for HW to reset the pin state to active, to resolve the
component registration issue which is seen on stability
runs.
Change-Id: Icd13bf36d56906553352e595d07e478c23d1c13d
Signed-off-by: sarath varma ganapathiraju <quic_ganavarm@quicinc.com>
Clk vote is present after teardown the usecase. which
is impacting the power, in SND_PMD call swr disconnect
to avoid clk votes.
Change-Id: I94d1ab9dc19a62132033a5715d4212dbcb7d2b0b
Signed-off-by: Prasad Kumpatla <quic_pkumpatl@quicinc.com>
