[ Upstream commit f77ebdda0ee652124061c2ac42399bb6c367e729 ]
This is a struct with a trailing zero-length array of icc_node pointers
but it's allocated as if it were a single array of icc_nodes instead.
Fortunately this overallocates memory rather then allocating less memory
than required.
Fix by replacing devm_kcalloc() with devm_kzalloc() and struct_size()
macro.
Fixes: 5bc9900add ("interconnect: qcom: Add OSM L3 interconnect provider support")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20230105002221.1416479-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1c5d4221240a233df2440fe75c881465cdf8da07 upstream.
The default maximum data buffer size for this interface is UHID_DATA_MAX
(4k). When data buffers are being processed, ensure this value is used
when ensuring the sanity, rather than a value between the user provided
value and HID_MAX_BUFFER_SIZE (16k).
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1a37ed00d7908a991c1d0f18a8cba3c2aa99bdc upstream.
Presently, when a report is processed, its proposed size, provided by
the user of the API (as Report Size * Report Count) is compared against
the subsystem default HID_MAX_BUFFER_SIZE (16k). However, some
low-level HID drivers allocate a reduced amount of memory to their
buffers (e.g. UHID only allocates UHID_DATA_MAX (4k) buffers), rending
this check inadequate in some cases.
In these circumstances, if the received report ends up being smaller
than the proposed report size, the remainder of the buffer is zeroed.
That is, the space between sizeof(csize) (size of the current report)
and the rsize (size proposed i.e. Report Size * Report Count), which can
be handled up to HID_MAX_BUFFER_SIZE (16k). Meaning that memset()
shoots straight past the end of the buffer boundary and starts zeroing
out in-use values, often resulting in calamity.
This patch introduces a new variable into 'struct hid_ll_driver' where
individual low-level drivers can over-ride the default maximum value of
HID_MAX_BUFFER_SIZE (16k) with something more sympathetic to the
interface.
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
[Lee: Backported to v5.10.y]
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b0463b9dd7030a766133ad2f1571f97f204d7bdf upstream.
xfs_setattr_time() has been removed since
commit e014f37db1a2 ("xfs: use setattr_copy to set vfs inode
attributes"), so remove it.
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8d84e39d76bd83474b26cb44f4b338635676e7e8 upstream.
Now that we made the VFS setgid checking consistent an inode can't be
marked security irrelevant even if the setgid bit is still set. Make
this function consistent with all other helpers.
Note that enforcing consistent setgid stripping checks for file
modification and mode- and ownership changes will cause the setgid bit
to be lost in more cases than useed to be the case. If an unprivileged
user wrote to a non-executable setgid file that they don't have
privilege over the setgid bit will be dropped. This will lead to
temporary failures in some xfstests until they have been updated.
Reported-by: Miklos Szeredi <miklos@szeredi.hu>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ed5a7047d2011cb6b2bf84ceb6680124cc6a7d95 upstream.
[backported to 5.10.y, prior to idmapped mounts]
Currently setgid stripping in file_remove_privs()'s should_remove_suid()
helper is inconsistent with other parts of the vfs. Specifically, it only
raises ATTR_KILL_SGID if the inode is S_ISGID and S_IXGRP but not if the
inode isn't in the caller's groups and the caller isn't privileged over the
inode although we require this already in setattr_prepare() and
setattr_copy() and so all filesystem implement this requirement implicitly
because they have to use setattr_{prepare,copy}() anyway.
But the inconsistency shows up in setgid stripping bugs for overlayfs in
xfstests (e.g., generic/673, generic/683, generic/685, generic/686,
generic/687). For example, we test whether suid and setgid stripping works
correctly when performing various write-like operations as an unprivileged
user (fallocate, reflink, write, etc.):
echo "Test 1 - qa_user, non-exec file $verb"
setup_testfile
chmod a+rws $junk_file
commit_and_check "$qa_user" "$verb" 64k 64k
The test basically creates a file with 6666 permissions. While the file has
the S_ISUID and S_ISGID bits set it does not have the S_IXGRP set. On a
regular filesystem like xfs what will happen is:
sys_fallocate()
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> setattr_copy()
In should_remove_suid() we can see that ATTR_KILL_SUID is raised
unconditionally because the file in the test has S_ISUID set.
But we also see that ATTR_KILL_SGID won't be set because while the file
is S_ISGID it is not S_IXGRP (see above) which is a condition for
ATTR_KILL_SGID being raised.
So by the time we call notify_change() we have attr->ia_valid set to
ATTR_KILL_SUID | ATTR_FORCE. Now notify_change() sees that
ATTR_KILL_SUID is set and does:
ia_valid = attr->ia_valid |= ATTR_MODE
attr->ia_mode = (inode->i_mode & ~S_ISUID);
which means that when we call setattr_copy() later we will definitely
update inode->i_mode. Note that attr->ia_mode still contains S_ISGID.
Now we call into the filesystem's ->setattr() inode operation which will
end up calling setattr_copy(). Since ATTR_MODE is set we will hit:
if (ia_valid & ATTR_MODE) {
umode_t mode = attr->ia_mode;
vfsgid_t vfsgid = i_gid_into_vfsgid(mnt_userns, inode);
if (!vfsgid_in_group_p(vfsgid) &&
!capable_wrt_inode_uidgid(mnt_userns, inode, CAP_FSETID))
mode &= ~S_ISGID;
inode->i_mode = mode;
}
and since the caller in the test is neither capable nor in the group of the
inode the S_ISGID bit is stripped.
But assume the file isn't suid then ATTR_KILL_SUID won't be raised which
has the consequence that neither the setgid nor the suid bits are stripped
even though it should be stripped because the inode isn't in the caller's
groups and the caller isn't privileged over the inode.
If overlayfs is in the mix things become a bit more complicated and the bug
shows up more clearly. When e.g., ovl_setattr() is hit from
ovl_fallocate()'s call to file_remove_privs() then ATTR_KILL_SUID and
ATTR_KILL_SGID might be raised but because the check in notify_change() is
questioning the ATTR_KILL_SGID flag again by requiring S_IXGRP for it to be
stripped the S_ISGID bit isn't removed even though it should be stripped:
sys_fallocate()
-> vfs_fallocate()
-> ovl_fallocate()
-> file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = ATTR_FORCE | kill;
-> notify_change()
-> ovl_setattr()
// TAKE ON MOUNTER'S CREDS
-> ovl_do_notify_change()
-> notify_change()
// GIVE UP MOUNTER'S CREDS
// TAKE ON MOUNTER'S CREDS
-> vfs_fallocate()
-> xfs_file_fallocate()
-> file_modified()
-> __file_remove_privs()
-> dentry_needs_remove_privs()
-> should_remove_suid()
-> __remove_privs()
newattrs.ia_valid = attr_force | kill;
-> notify_change()
The fix for all of this is to make file_remove_privs()'s
should_remove_suid() helper to perform the same checks as we already
require in setattr_prepare() and setattr_copy() and have notify_change()
not pointlessly requiring S_IXGRP again. It doesn't make any sense in the
first place because the caller must calculate the flags via
should_remove_suid() anyway which would raise ATTR_KILL_SGID.
While we're at it we move should_remove_suid() from inode.c to attr.c
where it belongs with the rest of the iattr helpers. Especially since it
returns ATTR_KILL_S{G,U}ID flags. We also rename it to
setattr_should_drop_suidgid() to better reflect that it indicates both
setuid and setgid bit removal and also that it returns attr flags.
Running xfstests with this doesn't report any regressions. We should really
try and use consistent checks.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 72ae017c5451860443a16fb2a8c243bff3e396b8 upstream.
[backported to 5.10.y, prior to idmapped mounts]
The current setgid stripping logic during write and ownership change
operations is inconsistent and strewn over multiple places. In order to
consolidate it and make more consistent we'll add a new helper
setattr_should_drop_sgid(). The function retains the old behavior where
we remove the S_ISGID bit unconditionally when S_IXGRP is set but also
when it isn't set and the caller is neither in the group of the inode
nor privileged over the inode.
We will use this helper both in write operation permission removal such
as file_remove_privs() as well as in ownership change operations.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e243e3f94c804ecca9a8241b5babe28f35258ef4 upstream.
Move the helper from inode.c to attr.c. This keeps the the core of the
set{g,u}id stripping logic in one place when we add follow-up changes.
It is the better place anyway, since should_remove_suid() returns
ATTR_KILL_S{G,U}ID flags.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11c2a8700cdcabf9b639b7204a1e38e2a0b6798e upstream.
[backported to 5.10.y, prior to idmapped mounts]
In setattr_{copy,prepare}() we need to perform the same permission
checks to determine whether we need to drop the setgid bit or not.
Instead of open-coding it twice add a simple helper the encapsulates the
logic. We will reuse this helpers to make dropping the setgid bit during
write operations more consistent in a follow up patch.
Reviewed-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1639a49ccdce58ea248841ed9b23babcce6dbb0b upstream.
[remove userns argument of helpers for 5.10.y backport]
Move setgid handling out of individual filesystems and into the VFS
itself to stop the proliferation of setgid inheritance bugs.
Creating files that have both the S_IXGRP and S_ISGID bit raised in
directories that themselves have the S_ISGID bit set requires additional
privileges to avoid security issues.
When a filesystem creates a new inode it needs to take care that the
caller is either in the group of the newly created inode or they have
CAP_FSETID in their current user namespace and are privileged over the
parent directory of the new inode. If any of these two conditions is
true then the S_ISGID bit can be raised for an S_IXGRP file and if not
it needs to be stripped.
However, there are several key issues with the current implementation:
* S_ISGID stripping logic is entangled with umask stripping.
If a filesystem doesn't support or enable POSIX ACLs then umask
stripping is done directly in the vfs before calling into the
filesystem.
If the filesystem does support POSIX ACLs then unmask stripping may be
done in the filesystem itself when calling posix_acl_create().
Since umask stripping has an effect on S_ISGID inheritance, e.g., by
stripping the S_IXGRP bit from the file to be created and all relevant
filesystems have to call posix_acl_create() before inode_init_owner()
where we currently take care of S_ISGID handling S_ISGID handling is
order dependent. IOW, whether or not you get a setgid bit depends on
POSIX ACLs and umask and in what order they are called.
Note that technically filesystems are free to impose their own
ordering between posix_acl_create() and inode_init_owner() meaning
that there's additional ordering issues that influence S_SIGID
inheritance.
* Filesystems that don't rely on inode_init_owner() don't get S_ISGID
stripping logic.
While that may be intentional (e.g. network filesystems might just
defer setgid stripping to a server) it is often just a security issue.
This is not just ugly it's unsustainably messy especially since we do
still have bugs in this area years after the initial round of setgid
bugfixes.
So the current state is quite messy and while we won't be able to make
it completely clean as posix_acl_create() is still a filesystem specific
call we can improve the S_SIGD stripping situation quite a bit by
hoisting it out of inode_init_owner() and into the vfs creation
operations. This means we alleviate the burden for filesystems to handle
S_ISGID stripping correctly and can standardize the ordering between
S_ISGID and umask stripping in the vfs.
We add a new helper vfs_prepare_mode() so S_ISGID handling is now done
in the VFS before umask handling. This has S_ISGID handling is
unaffected unaffected by whether umask stripping is done by the VFS
itself (if no POSIX ACLs are supported or enabled) or in the filesystem
in posix_acl_create() (if POSIX ACLs are supported).
The vfs_prepare_mode() helper is called directly in vfs_*() helpers that
create new filesystem objects. We need to move them into there to make
sure that filesystems like overlayfs hat have callchains like:
sys_mknod()
-> do_mknodat(mode)
-> .mknod = ovl_mknod(mode)
-> ovl_create(mode)
-> vfs_mknod(mode)
get S_ISGID stripping done when calling into lower filesystems via
vfs_*() creation helpers. Moving vfs_prepare_mode() into e.g.
vfs_mknod() takes care of that. This is in any case semantically cleaner
because S_ISGID stripping is VFS security requirement.
Security hooks so far have seen the mode with the umask applied but
without S_ISGID handling done. The relevant hooks are called outside of
vfs_*() creation helpers so by calling vfs_prepare_mode() from vfs_*()
helpers the security hooks would now see the mode without umask
stripping applied. For now we fix this by passing the mode with umask
settings applied to not risk any regressions for LSM hooks. IOW, nothing
changes for LSM hooks. It is worth pointing out that security hooks
never saw the mode that is seen by the filesystem when actually creating
the file. They have always been completely misplaced for that to work.
The following filesystems use inode_init_owner() and thus relied on
S_ISGID stripping: spufs, 9p, bfs, btrfs, ext2, ext4, f2fs, hfsplus,
hugetlbfs, jfs, minix, nilfs2, ntfs3, ocfs2, omfs, overlayfs, ramfs,
reiserfs, sysv, ubifs, udf, ufs, xfs, zonefs, bpf, tmpfs.
All of the above filesystems end up calling inode_init_owner() when new
filesystem objects are created through the ->mkdir(), ->mknod(),
->create(), ->tmpfile(), ->rename() inode operations.
Since directories always inherit the S_ISGID bit with the exception of
xfs when irix_sgid_inherit mode is turned on S_ISGID stripping doesn't
apply. The ->symlink() and ->link() inode operations trivially inherit
the mode from the target and the ->rename() inode operation inherits the
mode from the source inode. All other creation inode operations will get
S_ISGID handling via vfs_prepare_mode() when called from their relevant
vfs_*() helpers.
In addition to this there are filesystems which allow the creation of
filesystem objects through ioctl()s or - in the case of spufs -
circumventing the vfs in other ways. If filesystem objects are created
through ioctl()s the vfs doesn't know about it and can't apply regular
permission checking including S_ISGID logic. Therfore, a filesystem
relying on S_ISGID stripping in inode_init_owner() in their ioctl()
callpath will be affected by moving this logic into the vfs. We audited
those filesystems:
* btrfs allows the creation of filesystem objects through various
ioctls(). Snapshot creation literally takes a snapshot and so the mode
is fully preserved and S_ISGID stripping doesn't apply.
Creating a new subvolum relies on inode_init_owner() in
btrfs_new_subvol_inode() but only creates directories and doesn't
raise S_ISGID.
* ocfs2 has a peculiar implementation of reflinks. In contrast to e.g.
xfs and btrfs FICLONE/FICLONERANGE ioctl() that is only concerned with
the actual extents ocfs2 uses a separate ioctl() that also creates the
target file.
Iow, ocfs2 circumvents the vfs entirely here and did indeed rely on
inode_init_owner() to strip the S_ISGID bit. This is the only place
where a filesystem needs to call mode_strip_sgid() directly but this
is self-inflicted pain.
* spufs doesn't go through the vfs at all and doesn't use ioctl()s
either. Instead it has a dedicated system call spufs_create() which
allows the creation of filesystem objects. But spufs only creates
directories and doesn't allo S_SIGID bits, i.e. it specifically only
allows 0777 bits.
* bpf uses vfs_mkobj() but also doesn't allow S_ISGID bits to be created.
The patch will have an effect on ext2 when the EXT2_MOUNT_GRPID mount
option is used, on ext4 when the EXT4_MOUNT_GRPID mount option is used,
and on xfs when the XFS_FEAT_GRPID mount option is used. When any of
these filesystems are mounted with their respective GRPID option then
newly created files inherit the parent directories group
unconditionally. In these cases non of the filesystems call
inode_init_owner() and thus did never strip the S_ISGID bit for newly
created files. Moving this logic into the VFS means that they now get
the S_ISGID bit stripped. This is a user visible change. If this leads
to regressions we will either need to figure out a better way or we need
to revert. However, given the various setgid bugs that we found just in
the last two years this is a regression risk we should take.
Associated with this change is a new set of fstests to enforce the
semantics for all new filesystems.
Link: https://lore.kernel.org/ceph-devel/20220427092201.wvsdjbnc7b4dttaw@wittgenstein [1]
Link: e014f37db1a2 ("xfs: use setattr_copy to set vfs inode attributes") [2]
Link: 01ea173e103e ("xfs: fix up non-directory creation in SGID directories") [3]
Link: fd84bfdddd16 ("ceph: fix up non-directory creation in SGID directories") [4]
Link: https://lore.kernel.org/r/1657779088-2242-3-git-send-email-xuyang2018.jy@fujitsu.com
Suggested-by: Dave Chinner <david@fromorbit.com>
Suggested-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
[<brauner@kernel.org>: rewrote commit message]
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2b3416ceff5e6bd4922f6d1c61fb68113dd82302 upstream.
[remove userns argument of helper for 5.10.y backport]
Add a dedicated helper to handle the setgid bit when creating a new file
in a setgid directory. This is a preparatory patch for moving setgid
stripping into the vfs. The patch contains no functional changes.
Currently the setgid stripping logic is open-coded directly in
inode_init_owner() and the individual filesystems are responsible for
handling setgid inheritance. Since this has proven to be brittle as
evidenced by old issues we uncovered over the last months (see [1] to
[3] below) we will try to move this logic into the vfs.
Link: e014f37db1a2 ("xfs: use setattr_copy to set vfs inode attributes") [1]
Link: 01ea173e103e ("xfs: fix up non-directory creation in SGID directories") [2]
Link: fd84bfdddd16 ("ceph: fix up non-directory creation in SGID directories") [3]
Link: https://lore.kernel.org/r/1657779088-2242-1-git-send-email-xuyang2018.jy@fujitsu.com
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-and-Tested-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e014f37db1a2d109afa750042ac4d69cf3e3d88e upstream.
[remove userns argument of setattr_copy() for 5.10.y backport]
Filipe Manana pointed out that XFS' behavior w.r.t. setuid/setgid
revocation isn't consistent with btrfs[1] or ext4. Those two
filesystems use the VFS function setattr_copy to convey certain
attributes from struct iattr into the VFS inode structure.
Andrey Zhadchenko reported[2] that XFS uses the wrong user namespace to
decide if it should clear setgid and setuid on a file attribute update.
This is a second symptom of the problem that Filipe noticed.
XFS, on the other hand, open-codes setattr_copy in xfs_setattr_mode,
xfs_setattr_nonsize, and xfs_setattr_time. Regrettably, setattr_copy is
/not/ a simple copy function; it contains additional logic to clear the
setgid bit when setting the mode, and XFS' version no longer matches.
The VFS implements its own setuid/setgid stripping logic, which
establishes consistent behavior. It's a tad unfortunate that it's
scattered across notify_change, should_remove_suid, and setattr_copy but
XFS should really follow the Linux VFS. Adapt XFS to use the VFS
functions and get rid of the old functions.
[1] https://lore.kernel.org/fstests/CAL3q7H47iNQ=Wmk83WcGB-KBJVOEtR9+qGczzCeXJ9Y2KCV25Q@mail.gmail.com/
[2] https://lore.kernel.org/linux-xfs/20220221182218.748084-1-andrey.zhadchenko@virtuozzo.com/
Fixes: 7fa294c899 ("userns: Allow chown and setgid preservation")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0b02c8c0d75a738c98c35f02efb36217c170d78c upstream.
[backport for 5.10.y]
Now that we only call xfs_update_prealloc_flags() from
xfs_file_fallocate() in the case where we need to set the
preallocation flag, do this in xfs_alloc_file_space() where we
already have the inode joined into a transaction and get
rid of the call to xfs_update_prealloc_flags() from the fallocate
code.
This also means that we now correctly avoid setting the
XFS_DIFLAG_PREALLOC flag when xfs_is_always_cow_inode() is true, as
these inodes will never have preallocated extents.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fbe7e520036583a783b13ff9744e35c2a329d9a4 upstream.
In XFS, we always update the inode change and modification time when
any fallocate() operation succeeds. Furthermore, as various
fallocate modes can change the file contents (extending EOF,
punching holes, zeroing things, shifting extents), we should drop
file privileges like suid just like we do for a regular write().
There's already a VFS helper that figures all this out for us, so
use that.
The net effect of this is that we no longer drop suid/sgid if the
caller is root, but we also now drop file capabilities.
We also move the xfs_update_prealloc_flags() function so that it now
is only called by the scope that needs to set the the prealloc flag.
Based on a patch from Darrick Wong.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 472c6e46f589c26057596dcba160712a5b3e02c5 upstream.
[partial backport for dependency -
xfs_ioc_space() still uses XFS_PREALLOC_SYNC]
Callers can acheive the same thing by calling xfs_log_force_inode()
after making their modifications. There is no need for
xfs_update_prealloc_flags() to do this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a54f78def73d847cb060b18c4e4a3d1d26c9ca6d upstream.
The recent patch to improve btree cycle checking caused a regression
when I rebased the in-memory btree branch atop the 5.19 for-next branch,
because in-memory short-pointer btrees do not have AG numbers. This
produced the following complaint from kmemleak:
unreferenced object 0xffff88803d47dde8 (size 264):
comm "xfs_io", pid 4889, jiffies 4294906764 (age 24.072s)
hex dump (first 32 bytes):
90 4d 0b 0f 80 88 ff ff 00 a0 bd 05 80 88 ff ff .M..............
e0 44 3a a0 ff ff ff ff 00 df 08 06 80 88 ff ff .D:.............
backtrace:
[<ffffffffa0388059>] xfbtree_dup_cursor+0x49/0xc0 [xfs]
[<ffffffffa029887b>] xfs_btree_dup_cursor+0x3b/0x200 [xfs]
[<ffffffffa029af5d>] __xfs_btree_split+0x6ad/0x820 [xfs]
[<ffffffffa029b130>] xfs_btree_split+0x60/0x110 [xfs]
[<ffffffffa029f6da>] xfs_btree_make_block_unfull+0x19a/0x1f0 [xfs]
[<ffffffffa029fada>] xfs_btree_insrec+0x3aa/0x810 [xfs]
[<ffffffffa029fff3>] xfs_btree_insert+0xb3/0x240 [xfs]
[<ffffffffa02cb729>] xfs_rmap_insert+0x99/0x200 [xfs]
[<ffffffffa02cf142>] xfs_rmap_map_shared+0x192/0x5f0 [xfs]
[<ffffffffa02cf60b>] xfs_rmap_map_raw+0x6b/0x90 [xfs]
[<ffffffffa0384a85>] xrep_rmap_stash+0xd5/0x1d0 [xfs]
[<ffffffffa0384dc0>] xrep_rmap_visit_bmbt+0xa0/0xf0 [xfs]
[<ffffffffa0384fb6>] xrep_rmap_scan_iext+0x56/0xa0 [xfs]
[<ffffffffa03850d8>] xrep_rmap_scan_ifork+0xd8/0x160 [xfs]
[<ffffffffa0385195>] xrep_rmap_scan_inode+0x35/0x80 [xfs]
[<ffffffffa03852ee>] xrep_rmap_find_rmaps+0x10e/0x270 [xfs]
I noticed that xfs_btree_insrec has a bunch of debug code that return
out of the function immediately, without freeing the "new" btree cursor
that can be returned when _make_block_unfull calls xfs_btree_split. Fix
the error return in this function to free the btree cursor.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 86d40f1e49e9a909d25c35ba01bea80dbcd758cb upstream.
[add XFS_QMOPT_QUOTALL flag to xfs_qm_dqpurge_all() for 5.10.y backport]
xfs/434 and xfs/436 have been reporting occasional memory leaks of
xfs_dquot objects. These tests themselves were the messenger, not the
culprit, since they unload the xfs module, which trips the slub
debugging code while tearing down all the xfs slab caches:
=============================================================================
BUG xfs_dquot (Tainted: G W ): Objects remaining in xfs_dquot on __kmem_cache_shutdown()
-----------------------------------------------------------------------------
Slab 0xffffea000606de00 objects=30 used=5 fp=0xffff888181b78a78 flags=0x17ff80000010200(slab|head|node=0|zone=2|lastcpupid=0xfff)
CPU: 0 PID: 3953166 Comm: modprobe Tainted: G W 5.18.0-rc6-djwx #rc6 d5824be9e46a2393677bda868f9b154d917ca6a7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
Since we don't generally rmmod the xfs module between fstests, this
means that xfs/434 is really just the canary in the coal mine --
something leaked a dquot, but we don't know who. After days of pounding
on fstests with kmemleak enabled, I finally got it to spit this out:
unreferenced object 0xffff8880465654c0 (size 536):
comm "u10:4", pid 88, jiffies 4294935810 (age 29.512s)
hex dump (first 32 bytes):
60 4a 56 46 80 88 ff ff 58 ea e4 5c 80 88 ff ff `JVF....X..\....
00 e0 52 49 80 88 ff ff 01 00 01 00 00 00 00 00 ..RI............
backtrace:
[<ffffffffa0740f6c>] xfs_dquot_alloc+0x2c/0x530 [xfs]
[<ffffffffa07443df>] xfs_qm_dqread+0x6f/0x330 [xfs]
[<ffffffffa07462a2>] xfs_qm_dqget+0x132/0x4e0 [xfs]
[<ffffffffa0756bb0>] xfs_qm_quotacheck_dqadjust+0xa0/0x3e0 [xfs]
[<ffffffffa075724d>] xfs_qm_dqusage_adjust+0x35d/0x4f0 [xfs]
[<ffffffffa06c9068>] xfs_iwalk_ag_recs+0x348/0x5d0 [xfs]
[<ffffffffa06c95d3>] xfs_iwalk_run_callbacks+0x273/0x540 [xfs]
[<ffffffffa06c9e8d>] xfs_iwalk_ag+0x5ed/0x890 [xfs]
[<ffffffffa06ca22f>] xfs_iwalk_ag_work+0xff/0x170 [xfs]
[<ffffffffa06d22c9>] xfs_pwork_work+0x79/0x130 [xfs]
[<ffffffff81170bb2>] process_one_work+0x672/0x1040
[<ffffffff81171b1b>] worker_thread+0x59b/0xec0
[<ffffffff8118711e>] kthread+0x29e/0x340
[<ffffffff810032bf>] ret_from_fork+0x1f/0x30
Now we know that quotacheck is at fault, but even this report was
canaryish -- it was triggered by xfs/494, which doesn't actually mount
any filesystems. (kmemleak can be a little slow to notice leaks, even
with fstests repeatedly whacking it to look for them.) Looking at the
*previous* fstest, however, showed that the test run before xfs/494 was
xfs/117. The tipoff to the problem is in this excerpt from dmesg:
XFS (sda4): Quotacheck needed: Please wait.
XFS (sda4): Metadata corruption detected at xfs_dinode_verify.part.0+0xdb/0x7b0 [xfs], inode 0x119 dinode
XFS (sda4): Unmount and run xfs_repair
XFS (sda4): First 128 bytes of corrupted metadata buffer:
00000000: 49 4e 81 a4 03 02 00 00 00 00 00 00 00 00 00 00 IN..............
00000010: 00 00 00 01 00 00 00 00 00 90 57 54 54 1a 4c 68 ..........WTT.Lh
00000020: 81 f9 7d e1 6d ee 16 00 34 bd 7d e1 6d ee 16 00 ..}.m...4.}.m...
00000030: 34 bd 7d e1 6d ee 16 00 00 00 00 00 00 00 00 00 4.}.m...........
00000040: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000050: 00 00 00 02 00 00 00 00 00 00 00 00 96 80 f3 ab ................
00000060: ff ff ff ff da 57 7b 11 00 00 00 00 00 00 00 03 .....W{.........
00000070: 00 00 00 01 00 00 00 10 00 00 00 00 00 00 00 08 ................
XFS (sda4): Quotacheck: Unsuccessful (Error -117): Disabling quotas.
The dinode verifier decided that the inode was corrupt, which causes
iget to return with EFSCORRUPTED. Since this happened during
quotacheck, it is obvious that the kernel aborted the inode walk on
account of the corruption error and disabled quotas. Unfortunately, we
neglect to purge the dquot cache before doing that, which is how the
dquots leaked.
The problems started 10 years ago in commit b84a3a, when the dquot lists
were converted to a radix tree, but the error handling behavior was not
correctly preserved -- in that commit, if the bulkstat failed and
usrquota was enabled, the bulkstat failure code would be overwritten by
the result of flushing all the dquots to disk. As long as that
succeeds, we'd continue the quota mount as if everything were ok, but
instead we're now operating with a corrupt inode and incorrect quota
usage counts. I didn't notice this bug in 2019 when I wrote commit
ebd126a, which changed quotacheck to skip the dqflush when the scan
doesn't complete due to inode walk failures.
Introduced-by: b84a3a9675 ("xfs: remove the per-filesystem list of dquots")
Fixes: ebd126a651 ("xfs: convert quotacheck to use the new iwalk functions")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5b55cbc2d72632e874e50d2e36bce608e55aaaea upstream.
[backport for 5.10.y, prior to perag refactoring in v5.14]
Not fatal, the assert is there to catch developer attention. I'm
seeing this occasionally during recoveryloop testing after a
shutdown, and I don't want this to stop an overnight recoveryloop
run as it is currently doing.
Convert the ASSERT to a XFS_IS_CORRUPT() check so it will dump a
corruption report into the log and cause a test failure that way,
but it won't stop the machine dead.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Dave Chinner <david@fromorbit.com>
Signed-off-by: Amir Goldstein <amir73il@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 53b54ad074de1896f8b021615f65b27f557ce874 upstream.
pci_bridge_wait_for_secondary_bus() is called after a Secondary Bus
Reset, but not after a DPC-induced Hot Reset.
As a result, the delays prescribed by PCIe r6.0 sec 6.6.1 are not
observed and devices on the secondary bus may be accessed before
they're ready.
One affected device is Intel's Ponte Vecchio HPC GPU. It comprises a
PCIe switch whose upstream port is not immediately ready after reset.
Because its config space is restored too early, it remains in
D0uninitialized, its subordinate devices remain inaccessible and DPC
recovery fails with messages such as:
i915 0000:8c:00.0: can't change power state from D3cold to D0 (config space inaccessible)
intel_vsec 0000:8e:00.1: can't change power state from D3cold to D0 (config space inaccessible)
pcieport 0000:89:02.0: AER: device recovery failed
Fix it.
Link: https://lore.kernel.org/r/9f5ff00e1593d8d9a4b452398b98aa14d23fca11.1673769517.git.lukas@wunner.de
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ac91e6980563ed53afadd925fa6585ffd2bc4a2c upstream.
Sheng Bi reports that pci_bridge_secondary_bus_reset() may fail to wait
for devices on the secondary bus to become accessible after reset:
Although it does call pci_dev_wait(), it erroneously passes the bridge's
pci_dev rather than that of a child. The bridge of course is always
accessible while its secondary bus is reset, so pci_dev_wait() returns
immediately.
Sheng Bi proposes introducing a new pci_bridge_secondary_bus_wait()
function which is called from pci_bridge_secondary_bus_reset():
https://lore.kernel.org/linux-pci/20220523171517.32407-1-windy.bi.enflame@gmail.com/
However we already have pci_bridge_wait_for_secondary_bus() which does
almost exactly what we need. So far it's only called on resume from
D3cold (which implies a Fundamental Reset per PCIe r6.0 sec 5.8).
Re-using it for Secondary Bus Resets is a leaner and more rational
approach than introducing a new function.
That only requires a few minor tweaks:
- Amend pci_bridge_wait_for_secondary_bus() to await accessibility of
the first device on the secondary bus by calling pci_dev_wait() after
performing the prescribed delays. pci_dev_wait() needs two parameters,
a reset reason and a timeout, which callers must now pass to
pci_bridge_wait_for_secondary_bus(). The timeout is 1 sec for resume
(PCIe r6.0 sec 6.6.1) and 60 sec for reset (commit 821cdad5c4 ("PCI:
Wait up to 60 seconds for device to become ready after FLR")).
Introduce a PCI_RESET_WAIT macro for the 1 sec timeout.
- Amend pci_bridge_wait_for_secondary_bus() to return 0 on success or
-ENOTTY on error for consumption by pci_bridge_secondary_bus_reset().
- Drop an unnecessary 1 sec delay from pci_reset_secondary_bus() which
is now performed by pci_bridge_wait_for_secondary_bus(). A static
delay this long is only necessary for Conventional PCI, so modern
PCIe systems benefit from shorter reset times as a side effect.
Fixes: 6b2f1351af ("PCI: Wait for device to become ready after secondary bus reset")
Link: https://lore.kernel.org/r/da77c92796b99ec568bd070cbe4725074a117038.1673769517.git.lukas@wunner.de
Reported-by: Sheng Bi <windy.bi.enflame@gmail.com>
Tested-by: Ravi Kishore Koppuravuri <ravi.kishore.koppuravuri@intel.com>
Signed-off-by: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Cc: stable@vger.kernel.org # v4.17+
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a52e5cdbe8016d4e3e6322fd93d71afddb9a5af9 upstream.
The code which handles the ipl report is searching for a free location
in memory where it could copy the component and certificate entries to.
It checks for intersection between the sections required for the kernel
and the component/certificate data area, but fails to check whether
the data structures linking these data areas together intersect.
This might cause the iplreport copy code to overwrite the iplreport
itself. Fix this by adding two addtional intersection checks.
Cc: <stable@vger.kernel.org>
Fixes: 9641b8cc73 ("s390/ipl: read IPL report at early boot")
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Signed-off-by: Sven Schnelle <svens@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
No upstream commit exists for this commit.
The issue was introduced with backporting upstream commit c16bda37594f
("io_uring/poll: allow some retries for poll triggering spuriously").
Memory allocation can possibly fail causing invalid pointer be
dereferenced just before comparing it to NULL value.
Move the pointer check in proper place (upstream has the similar location
of the check). In case the request has REQ_F_POLLED flag up, apoll can't
be NULL so no need to check there.
Found by Linux Verification Center (linuxtesting.org) with Syzkaller.
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e0e6b416b25ee14716f3549e0cbec1011b193809 upstream.
Users reported oopses on list corruptions when using i915 perf with a
number of concurrently running graphics applications. Root cause analysis
pointed at an issue in barrier processing code -- a race among perf open /
close replacing active barriers with perf requests on kernel context and
concurrent barrier preallocate / acquire operations performed during user
context first pin / last unpin.
When adding a request to a composite tracker, we try to reuse an existing
fence tracker, already allocated and registered with that composite. The
tracker we obtain may already track another fence, may be an idle barrier,
or an active barrier.
If the tracker we get occurs a non-idle barrier then we try to delete that
barrier from a list of barrier tasks it belongs to. However, while doing
that we don't respect return value from a function that performs the
barrier deletion. Should the deletion ever fail, we would end up reusing
the tracker still registered as a barrier task. Since the same structure
field is reused with both fence callback lists and barrier tasks list,
list corruptions would likely occur.
Barriers are now deleted from a barrier tasks list by temporarily removing
the list content, traversing that content with skip over the node to be
deleted, then populating the list back with the modified content. Should
that intentionally racy concurrent deletion attempts be not serialized,
one or more of those may fail because of the list being temporary empty.
Related code that ignores the results of barrier deletion was initially
introduced in v5.4 by commit d8af05ff38 ("drm/i915: Allow sharing the
idle-barrier from other kernel requests"). However, all users of the
barrier deletion routine were apparently serialized at that time, then the
issue didn't exhibit itself. Results of git bisect with help of a newly
developed igt@gem_barrier_race@remote-request IGT test indicate that list
corruptions might start to appear after commit 311770173f ("drm/i915/gt:
Schedule request retirement when timeline idles"), introduced in v5.5.
Respect results of barrier deletion attempts -- mark the barrier as idle
only if successfully deleted from the list. Then, before proceeding with
setting our fence as the one currently tracked, make sure that the tracker
we've got is not a non-idle barrier. If that check fails then don't use
that tracker but go back and try to acquire a new, usable one.
v3: use unlikely() to document what outcome we expect (Andi),
- fix bad grammar in commit description.
v2: no code changes,
- blame commit 311770173f ("drm/i915/gt: Schedule request retirement
when timeline idles"), v5.5, not commit d8af05ff38 ("drm/i915: Allow
sharing the idle-barrier from other kernel requests"), v5.4,
- reword commit description.
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/6333
Fixes: 311770173f ("drm/i915/gt: Schedule request retirement when timeline idles")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org # v5.5
Cc: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230302120820.48740-1-janusz.krzysztofik@linux.intel.com
(cherry picked from commit 506006055769b10d1b2b4e22f636f3b45e0e9fc7)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 690e0ec8e63da9a29b39fedc6ed5da09c7c82651 upstream.
Direction from hardware is that stolen memory should never be used for
ring buffer allocations on platforms with LLC. There are too many
caching pitfalls due to the way stolen memory accesses are routed. So
it is safest to just not use it.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Fixes: c58b735fc7 ("drm/i915: Allocate rings from stolen")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: intel-gfx@lists.freedesktop.org
Cc: <stable@vger.kernel.org> # v4.9+
Tested-by: Jouni Högander <jouni.hogander@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230216011101.1909009-2-John.C.Harrison@Intel.com
(cherry picked from commit f54c1f6c697c4297f7ed94283c184acc338a5cf8)
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cbebd68f59f03633469f3ecf9bea99cd6cce3854 upstream.
cmdline_find_option() may fail before doing any initialization of
the buffer array. This may lead to unpredictable results when the same
buffer is used later in calls to strncmp() function. Fix the issue by
returning early if cmdline_find_option() returns an error.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes: aca20d5462 ("x86/mm: Add support to make use of Secure Memory Encryption")
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Acked-by: Tom Lendacky <thomas.lendacky@amd.com>
Cc: <stable@kernel.org>
Link: https://lore.kernel.org/r/20230306160656.14844-1-n.zhandarovich@fintech.ru
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4783b9cb374af02d49740e00e2da19fd4ed6dec4 upstream.
A recent change introduced a flag to queue up errors found during
boot-time polling. These errors will be processed during late init once
the MCE subsystem is fully set up.
A number of sysfs updates call mce_restart() which goes through a subset
of the CPU init flow. This includes polling MCA banks and logging any
errors found. Since the same function is used as boot-time polling,
errors will be queued. However, the system is now past late init, so the
errors will remain queued until another error is found and the workqueue
is triggered.
Call mce_schedule_work() at the end of mce_restart() so that queued
errors are processed.
Fixes: 3bff147b187d ("x86/mce: Defer processing of early errors")
Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Reviewed-by: Tony Luck <tony.luck@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230301221420.2203184-1-yazen.ghannam@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 203873a535d627c668f293be0cb73e26c30f9cc7 upstream.
Find a valid modeline depending on the machine graphic card
configuration and add the fb_check_var() function to validate
Xorg provided graphics settings.
Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 11440da77d6020831ee6f9ce4551b545dea789ee upstream.
Lower the power-on failed message severity from warn to info when the
controller does not power-up. It's normal to have this situation when
the SD card slot is empty, therefore we should not warn the user about
it.
Fixes: 7ca0f166f5 ("mmc: sdhci_am654: Add workaround for card detect debounce timer")
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230306162751.163369-1-francesco@dolcini.it
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee92fa443358f4fc0017c1d0d325c27b37802504 upstream.
KASAN reported follow problem:
BUG: KASAN: use-after-free in lookup_rec
Read of size 8 at addr ffff000199270ff0 by task modprobe
CPU: 2 Comm: modprobe
Call trace:
kasan_report
__asan_load8
lookup_rec
ftrace_location
arch_check_ftrace_location
check_kprobe_address_safe
register_kprobe
When checking pg->records[pg->index - 1].ip in lookup_rec(), it can get a
pg which is newly added to ftrace_pages_start in ftrace_process_locs().
Before the first pg->index++, index is 0 and accessing pg->records[-1].ip
will cause this problem.
Don't check the ip when pg->index is 0.
Link: https://lore.kernel.org/linux-trace-kernel/20230309080230.36064-1-chenzhongjin@huawei.com
Cc: stable@vger.kernel.org
Fixes: 9644302e33 ("ftrace: Speed up search by skipping pages by address")
Suggested-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3ba14528684f528566fb7d956bfbfb958b591d86 upstream.
tcp_set_state() is called from tcp_done() already.
There is then no need to first set the state to TCP_CLOSE, then call
tcp_done().
Fixes: d582484726 ("mptcp: fix fallback for MP_JOIN subflows")
Cc: stable@vger.kernel.org
Closes: https://github.com/multipath-tcp/mptcp_net-next/issues/362
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee9adb7a45516cfa536ca92253d7ae59d56db9e4 upstream.
drm_gem_shmem_mmap() doesn't own reference in error code path, resulting
in the dma-buf shmem GEM object getting prematurely freed leading to a
later use-after-free.
Fixes: f49a51bfdc ("drm/shme-helpers: Fix dma_buf_mmap forwarding bug")
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Osipenko <dmitry.osipenko@collabora.com>
Reviewed-by: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230108211311.3950107-1-dmitry.osipenko@collabora.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a86e79e3015f5dd8e1b01ccfa49bd5c6e41047a1 upstream.
Samsung Galaxy Book2 Pro (13" 2022 NP930XED-KA1DE) with codec SSID
144d:c868 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 code.
Signed-off-by: Hamidreza H. Fard <nitocris@posteo.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307163741.3878-1-nitocris@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 112e66017bff7f2837030f34c2bc19501e9212d5 upstream.
The effective values of the guest CR0 and CR4 registers may differ from
those included in the VMCS12. In particular, disabling EPT forces
CR4.PAE=1 and disabling unrestricted guest mode forces CR0.PG=CR0.PE=1.
Therefore, checks on these bits cannot be delegated to the processor
and must be performed by KVM.
Reported-by: Reima ISHII <ishiir@g.ecc.u-tokyo.ac.jp>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 211baef0eabf4169ce4f73ebd917749d1a7edd74 upstream.
If cifs_get_writable_path() finds a writable file, smb2_compound_op()
must use that file's FID and not the COMPOUND_FID.
Cc: stable@vger.kernel.org
Signed-off-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2679254b9c9980d9045f0f722cf093a2b1f7590 upstream.
A while ago where the trace events had the following:
rcu_read_lock_sched_notrace();
rcu_dereference_sched(...);
rcu_read_unlock_sched_notrace();
If the tracepoint is enabled, it could trigger RCU issues if called in
the wrong place. And this warning was only triggered if lockdep was
enabled. If the tracepoint was never enabled with lockdep, the bug would
not be caught. To handle this, the above sequence was done when lockdep
was enabled regardless if the tracepoint was enabled or not (although the
always enabled code really didn't do anything, it would still trigger a
warning).
But a lot has changed since that lockdep code was added. One is, that
sequence no longer triggers any warning. Another is, the tracepoint when
enabled doesn't even do that sequence anymore.
The main check we care about today is whether RCU is "watching" or not.
So if lockdep is enabled, always check if rcu_is_watching() which will
trigger a warning if it is not (tracepoints require RCU to be watching).
Note, that old sequence did add a bit of overhead when lockdep was enabled,
and with the latest kernel updates, would cause the system to slow down
enough to trigger kernel "stalled" warnings.
Link: http://lore.kernel.org/lkml/20140806181801.GA4605@redhat.com
Link: http://lore.kernel.org/lkml/20140807175204.C257CAC5@viggo.jf.intel.com
Link: https://lore.kernel.org/lkml/20230307184645.521db5c9@gandalf.local.home/
Link: https://lore.kernel.org/linux-trace-kernel/20230310172856.77406446@gandalf.local.home
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Cc: "Paul E. McKenney" <paulmck@kernel.org>
Cc: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Acked-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Paul E. McKenney <paulmck@kernel.org>
Fixes: e6753f23d9 ("tracepoint: Make rcuidle tracepoint callers use SRCU")
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f116f76fa8c04c81aef33ad870dbf9a158e5b70 upstream.
The function hist_field_name() cannot handle being passed a NULL field
parameter. It should never be NULL, but due to a previous bug, NULL was
passed to the function and the kernel crashed due to a NULL dereference.
Mark Rutland reported this to me on IRC.
The bug was fixed, but to prevent future bugs from crashing the kernel,
check the field and add a WARN_ON() if it is NULL.
Link: https://lkml.kernel.org/r/20230302020810.762384440@goodmis.org
Cc: stable@vger.kernel.org
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Fixes: c6afad49d1 ("tracing: Add hist trigger 'sym' and 'sym-offset' modifiers")
Tested-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e400be674a1a40e9dcb2e95f84d6c1fd2d88f31d upstream.
Since the commit 36e2c7421f ("fs: don't allow splice read/write
without explicit ops") is applied to the kernel, splice() and
sendfile() calls on the trace file (/sys/kernel/debug/tracing
/trace) return EINVAL.
This patch restores these system calls by initializing splice_read
in file_operations of the trace file. This patch only enables such
functionalities for the read case.
Link: https://lore.kernel.org/linux-trace-kernel/20230314013707.28814-1-sfoon.kim@samsung.com
Cc: stable@vger.kernel.org
Fixes: 36e2c7421f ("fs: don't allow splice read/write without explicit ops")
Signed-off-by: Sung-hun Kim <sfoon.kim@samsung.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5904f415e1af72fa8fe6665aa4f554dc2099a95 upstream.
The node link array is allocated when adding links to a node but is not
deallocated when nodes are destroyed.
Fixes: 11f1ceca70 ("interconnect: Add generic on-chip interconnect API")
Cc: stable@vger.kernel.org # 5.1
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # i.MX8MP MSC SM2-MB-EP1 Board
Link: https://lore.kernel.org/r/20230306075651.2449-2-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 32e293be736b853f168cd065d9cbc1b0c69f545d upstream.
As per HW manual for EMEV2 "R19UH0040EJ0400 Rev.4.00", the UART
IP found on EMMA mobile SoC is Register-compatible with the
general-purpose 16750 UART chip. Fix UART port type as 16750 and
enable 64-bytes fifo support.
Fixes: 22886ee968 ("serial8250-em: Emma Mobile UART driver V2")
Cc: stable@vger.kernel.org
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230227114152.22265-2-biju.das.jz@bp.renesas.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2411fd94ceaa6e11326e95d6ebf876cbfed28d23 upstream.
According to LPUART RM, Transmission Complete Flag becomes 0 if queuing
a break character by writing 1 to CTRL[SBK], so here need to skip
waiting for transmission complete when UARTCTRL_SBK is asserted,
otherwise the kernel may stuck here.
And actually set_termios() adds transmission completion waiting to avoid
data loss or data breakage when changing the baud rate, but we don't
need to worry about this when queuing break characters.
Signed-off-by: Sherry Sun <sherry.sun@nxp.com>
Cc: stable <stable@kernel.org>
Link: https://lore.kernel.org/r/20230223093941.31790-1-sherry.sun@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 031f196d1b1b6d5dfcb0533b431e3ab1750e6189 ]
[WHY]
When PTEBufferSizeInRequests is zero, UBSAN reports the following
warning because dml_log2 returns an unexpected negative value:
shift exponent 4294966273 is too large for 32-bit type 'int'
[HOW]
In the case PTEBufferSizeInRequests is zero, skip the dml_log2() and
assign the result directly.
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 250870824c1cf199b032b1ef889c8e8d69d9123a ]
GCC warns about the pattern sizeof(void*)/sizeof(void), as it looks like
the abuse of a pattern to calculate the array size. This pattern appears
in the unevaluated part of the ternary operator in _INTC_ARRAY if the
parameter is NULL.
The replacement uses an alternate approach to return 0 in case of NULL
which does not generate the pattern sizeof(void*)/sizeof(void), but still
emits the warning if _INTC_ARRAY is called with a nonarray parameter.
This patch is required for successful compilation with -Werror enabled.
The idea to use _Generic for type distinction is taken from Comment #7
in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=108483 by Jakub Jelinek
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Acked-by: Randy Dunlap <rdunlap@infradead.org> # build-tested
Link: https://lore.kernel.org/r/619fa552-c988-35e5-b1d7-fe256c46a272@mkarcher.dialup.fu-berlin.de
Signed-off-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
