The PrPMC1100 machine was removed in 2.6.11, but left a reference to machine_is_prpmc1100 in arch/arm/kernel/bios32.c. 6f82f4db80189281a8ac42f2e72396accb719b57 removed the machine type, which causes a build failure:
CC arch/arm/kernel/bios32.o
arch/arm/kernel/bios32.c: In function 'pci_fixup_prpmc1100':
arch/arm/kernel/bios32.c:174: error: implicit declaration of function 'machine_is_prpmc1100'
Remove the unused pci_fixup_prpcm1100.
Signed-off-by: Colin Cross <ccross@android.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The Rn value from the emulation is unconditionally written back;
this is fine as long as Rn != PC because in that case, even if the
instruction isn't a write back instruction, it will only result in the
same value being written back.
In case Rn == PC, then the emulated instruction doesn't have the
actual PC value in Rn but an adjusted value; when this is written
back, it will result in the PC being incorrectly updated.
An altenative solution would be to check bits 24 and 22 to see whether
the instruction actually is a write back instruction or not. I think
it's enough to check whether Rn != PC, because:
- it's looks cheaper than the alternative
- to my understaning it's not permitted to update the PC with a write
back instruction, so we don't lose any ability to emulate legal
instructions.
- in case of writing back for non write back instructions where Rn != PC, it doesn't matter because the values are the same.
Regarding the second point above, it would possibly be prudent to add
some checking to prep_emulate_ldr_str(), so that instructions with
both write back and Rn == PC would be rejected.
Signed-off-by: Viktor Rosendahl <viktor.rosendahl@nokia.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Remove call to the old GPIO init function.
Fix old MPP control offset value.
Signed-off-by: Konstantin Porotchkin <kostap@marvell.com>
Acked-by: Saeed Bishara <saeed.bishara@gmail.com>
Signed-off-by: Nicolas Pitre <nico@fluxnic.net>
If a counter overflows during a perf stat profiling run it may overtake
the last known value of the counter:
0 prev new 0xffffffff
|----------|-------|----------------------|
In this case, the number of events that have occurred is
(0xffffffff - prev) + new. Unfortunately, the event update code will
not realise an overflow has occurred and will instead report the event
delta as (new - prev) which may be considerably smaller than the real
count.
This patch adds an extra argument to armpmu_event_update which indicates
whether or not an overflow has occurred. If an overflow has occurred
then we use the maximum period of the counter to calculate the elapsed
events.
Acked-by: Jamie Iles <jamie@jamieiles.com>
Reported-by: Ashwin Chaugule <ashwinc@codeaurora.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
ARMv7 dictates that the interrupt-enable and count-enable registers for
each PMU counter are UNKNOWN following core reset.
This patch adds a new (optional) function pointer to struct arm_pmu for
resetting the PMU state during init. The reset function is called on
each CPU via an arch_initcall in the generic ARM perf_event code and
allows the PMU backend to write sane values to any UNKNOWN registers.
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The ARMv7 architecture does not guarantee that effects from co-processor
writes are immediately visible to following instructions.
This patch adds two isbs to the ARMv7 perf code:
(1) Immediately after selecting an event register, so that the PMU state
following this instruction is consistent with the new event.
(2) Immediately before writing to the PMCR, so that any previous writes
to the PMU have taken effect before (typically) enabling the
counters.
Acked-by: Jean Pihet <j-pihet@ti.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Signed-off-by: Nicolas Pitre <nicolas.pitre@linaro.org>
Reviewed-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
The second GIC, present when EB board is used with a MPCore tile,
was initialised starting with irq number 64, which made interrupts
64-95 in the primary GIC unusable.
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
* 'syscore' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/suspend-2.6:
Introduce ARCH_NO_SYSDEV_OPS config option (v2)
cpufreq: Use syscore_ops for boot CPU suspend/resume (v2)
KVM: Use syscore_ops instead of sysdev class and sysdev
PCI / Intel IOMMU: Use syscore_ops instead of sysdev class and sysdev
timekeeping: Use syscore_ops instead of sysdev class and sysdev
x86: Use syscore_ops instead of sysdev classes and sysdevs
* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (55 commits)
[SCSI] tcm_loop: Add multi-fabric Linux/SCSI LLD fabric module
[SCSI] qla4xxx: Use polling mode for disable interrupt mailbox completion
[SCSI] Revert "[SCSI] Retrieve the Caching mode page"
[SCSI] bnx2fc: IO completion not processed due to missed wakeup
[SCSI] qla4xxx: Update driver version to 5.02.00-k6
[SCSI] qla4xxx: masking required bits of add_fw_options during initialization
[SCSI] qla4xxx: added new function qla4xxx_relogin_all_devices
[SCSI] qla4xxx: add support for ql4xsess_recovery_tmo cmd line param
[SCSI] qla4xxx: Add support for ql4xmaxqdepth command line parameter
[SCSI] qla4xxx: cleanup function qla4xxx_process_ddb_changed
[SCSI] qla4xxx: Prevent other port reinitialization during remove_adapter
[SCSI] qla4xxx: remove unused ddb flag DF_NO_RELOGIN
[SCSI] qla4xxx: cleanup DDB relogin logic during initialization
[SCSI] qla4xxx: Do not retry ISP82XX initialization if H/W state is failed
[SCSI] qla4xxx: Do not send mbox command if FW is in failed state
[SCSI] qla4xxx: cleanup qla4xxx_initialize_ddb_list()
[SCSI] ses: add subenclosure support
[SCSI] bnx2fc: Bump version to 1.0.1
[SCSI] bnx2fc: Remove unnecessary module state checks
[SCSI] bnx2fc: Fix MTU issue by using static MTU
...
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
kdb: add usage string of 'per_cpu' command
kgdb,x86_64: fix compile warning found with sparse
kdb: code cleanup to use macro instead of value
kgdboc,kgdbts: strlen() doesn't count the terminator
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (56 commits)
route: Take the right src and dst addresses in ip_route_newports
ipv4: Fix nexthop caching wrt. scoping.
ipv4: Invalidate nexthop cache nh_saddr more correctly.
net: fix pch_gbe section mismatch warning
ipv4: fix fib metrics
mlx4_en: Removing HW info from ethtool -i report.
net_sched: fix THROTTLED/RUNNING race
drivers/net/a2065.c: Convert release_resource to release_region/release_mem_region
drivers/net/ariadne.c: Convert release_resource to release_region/release_mem_region
bonding: fix rx_handler locking
myri10ge: fix rmmod crash
mlx4_en: updated driver version to 1.5.4.1
mlx4_en: Using blue flame support
mlx4_core: reserve UARs for userspace consumers
mlx4_core: maintain available field in bitmap allocator
mlx4: Add blue flame support for kernel consumers
mlx4_en: Enabling new steering
mlx4: Add support for promiscuous mode in the new steering model.
mlx4: generalization of multicast steering.
mlx4_en: Reporting HW revision in ethtool -i
...
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6:
PCI: Disable ASPM when _OSC control is not granted for PCIe services
PCI: Changing ASPM policy, via /sys, to POWERSAVE could cause NMIs
PCI: PCIe links may not get configured for ASPM under POWERSAVE mode
PCI/ACPI: Report ASPM support to BIOS if not disabled from command line
* git://git.infradead.org/battery-2.6: (30 commits)
bq20z75: Fix time and temp units
bq20z75: Fix issues with present and suspend
z2_battery: Fix count of properties
s3c_adc_battery: Fix method names when PM not set
z2_battery: Add MODULE_DEVICE_TABLE
ds2782_battery: Add MODULE_DEVICE_TABLE
bq20z75: Add MODULE_DEVICE_TABLE
power_supply: Update power_supply_is_watt_property
bq20z75: Add i2c retry mechanism
bq20z75: Add optional battery detect gpio
twl4030_charger: Make the driver atomic notifier safe
bq27x00: Use single i2c_transfer call for property read
bq27x00: Cleanup bq27x00_i2c_read
bq27x00: Minor cleanups
bq27x00: Give more specific reports on battery status
bq27x00: Add MODULE_DEVICE_TABLE
bq27x00: Add new properties
bq27x00: Poll battery state
bq27x00: Cache battery registers
bq27x00: Add bq27000 support
...
* git://git.kernel.org/pub/scm/linux/kernel/git/agk/linux-2.6-dm:
dm stripe: implement merge method
dm mpath: allow table load with no priority groups
dm mpath: fail message ioctl if specified path is not valid
dm ioctl: add flag to wipe buffers for secure data
dm ioctl: prepare for crypt key wiping
dm crypt: wipe keys string immediately after key is set
dm: add flakey target
dm: fix opening log and cow devices for read only tables
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: tsc2005 - fix locking issue
Input: tsc2005 - use relative jiffies to schedule the watchdog
Input: tsc2005 - driver should depend on GENERIC_HARDIRQS
* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
perf, x86: Complain louder about BIOSen corrupting CPU/PMU state and continue
perf, x86: P4 PMU - Read proper MSR register to catch unflagged overflows
perf symbols: Look at .dynsym again if .symtab not found
perf build-id: Add quirk to deal with perf.data file format breakage
perf session: Pass evsel in event_ops->sample()
perf: Better fit max unprivileged mlock pages for tools needs
perf_events: Fix stale ->cgrp pointer in update_cgrp_time_from_cpuctx()
perf top: Fix uninitialized 'counter' variable
tracing: Fix set_ftrace_filter probe function display
perf, x86: Fix Intel fixed counters base initialization
* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
genirq: Provide locked setter for chip, handler, name
genirq: Provide a lockdep helper
genirq; Remove the last leftovers of the old sparse irq code
* 'core-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
futex: Fix WARN_ON() test for UP
WARN_ON_SMP(): Allow use in if() statements on UP
x86, dumpstack: Use %pB format specifier for stack trace
vsprintf: Introduce %pB format specifier
lockdep: Remove unused 'factor' variable from lockdep_stats_show()
* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
[S390] cmpxchg: implement cmpxchg64()
[S390] xchg/cmpxchg: move to own header file
[S390] ccwgroup_driver: remove duplicate members
[S390] ccw_bus_type: make it static
[S390] ccw_driver: remove duplicate members
[S390] qdio: prevent handling of buffers if count is zero
[S390] setup: register bss section as resource
[S390] setup: simplify setup_resources()
[S390] wire up sys_syncfs
[S390] wire up sys_clock_adjtime
[S390] wire up sys_open_by_handle_at
[S390] wire up sys_name_to_handle_at
[S390] oprofile: disable hw sampling for CONFIG_32BIT
[S390] early: limit savesys cmd string handling
[S390] early: Fix possible overlapping data buffer
* 'upstream' of git://git.linux-mips.org/pub/scm/upstream-linus: (49 commits)
MIPS: JZ4740: Set nand ecc offsets for the qi_lb60 board
MIPS: JZ4740: qi_lb60: Add gpio-charger device
MIPS: Wire up syncfs(2).
MIPS: Hook up name_to_handle_at, open_by_handle_at and clock_adjtime syscalls.
MIPS: VR41xx: Convert to new irq_chip functions
MIPS: TXx9: Convert to new irq_chip functions
MIPS: SNI: Convert to new irq_chip functions
MIPS: Sibyte: Convert to new irq_chip functions
MIPS: IP32: Convert to new irq_chip functions
MIPS: IP27: Convert to new irq_chip functions
MIPS: IP22/IP28: Convert to new irq_chip functions
MIPS: RB532: Convert to new irq_chip functions
MIPS: PowerTV: Convert to new irq_chip functions
MIPS: PNX8550: Convert to new irq_chip functions
MIPS: PNX83xx: Convert to new irq_chip functions
MIPS: msp71xx: Convert to new irq_chip functions
MIPS: Loongson: Convert to new irq_chip functions
MIPS: Use generic show_interrupts()
MIPS: SMTC: Cleanup the hook mess and use irq_data
MIPS: SMTC: Use irq_data in smtc_forward_irq()
...
commit b515498 ("userns: add a user namespace owner of ipc ns") added a
user namespace owner of ipc ns, but it also introduced a use after free in
free_ipc_ns().
Signed-off-by: Xiaotian Feng <dfeng@redhat.com>
Acked-by: "Serge E. Hallyn" <serge.hallyn@canonical.com>
Acked-by: David Howells <dhowells@redhat.com>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Daniel Lezcano <daniel.lezcano@free.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Fix sparse warning:
arch/x86/kernel/kgdb.c:123:9: warning: switch with no cases
Reported-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
It's better to use macro KDB_BASE_CMD_MAX instead of 50
Signed-off-by: Jovi Zhang <bookjovi@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
This is an off by one because strlen() doesn't count the null
terminator. We strcpy() these strings into an array of size
MAX_CONFIG_LEN.
Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Jason Wessel <jason.wessel@windriver.com>
These system calls we recently added.
32-bit ABIs need compat handling for sys_clock_adjtime().
o32 also needs compat handling for sys_open_by_handle_at();
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/2165/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
