Remove the #if 0'ed out code that would initialize an analog output
subdevice.
The hardware does not normally support an analog output subdevice.
Analog outputs are only supported with additional "piggyback" modules.
Support for these modules is not included in the driver.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformat the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
These defines are not used. Remove them to get rid of the
checkpatch.pl issue about avoiding CamelCase.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the MODULE_DESCRIPTION to something more useful than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This driver does not use interrupts. Remove the include.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Encoders are not a "normal" subdevice in comedi. For aesthetics, tidy
up this function and add a couple comments to clarify the function and
explain the strange munging of the data.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This define is not needed. Remove it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Currently this driver resets all the encoder channels when the driver
is first attached. Add a (*insn_config) to the subdevice to allow the
use to reset the channels manually.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add some comments to document the commands that are sent to the
encoder chips.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move these defines closer to the register define and
use the BIT macro to define the bits.
Add macros to set the bits needed to select the channel for the analog
output, analog input, and encoder (counter) subdevices as well as the
realtime clock registers.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
According to the programming manual. the 'SH' and 'CLK' bits in the
control register need to be kept high at all times. Clarify this by
introducing a helper function to set the control register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move these defines closer to the register define and
use the BIT macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For auesthetics, rename the register map defines. Convert the offset
values to hex and add some whitespace.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, add some whitespace to the subdevice init and rearrange
the initialization a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, use the proper symbol when reading the A/D data register
to get the 16-bit sample data.
Use the comedi_offset_munge() to do the 2's complement to offset binary
munging of the sample data.
Tidy up the function a bit.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformat the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The pacer will either be used to trigger each conversion or to start each
scan. Modify the (*do_cmdtest) so that one one divisor calculation is needed.
Save the divisor value in the private data so that the (*do_cmd) does not
have to do the calculation again.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The ai (*do_cmd) assumes that either the convert_src is TRIG_TIMER or
the scan_begin_src is TRIG_TIMER and always programs the pacer clock
with the appropriate trigger argument.
Add a Step 2b check to the (*do_cmdtest) to ensure that at least one
of the triggers is TRIG_TIMER.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Step 3 of the (*do_cmdtest) trivially validates the async command arguments.
The validations also modify the arguments if they are invalid so that the
user gets valid values if the test fails.
Reorder the checks so that if any of the checks fail proper values are
used for subsequent checks.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Make sure interrupts are disabled and the event flags are cleared when
an analog input async command is canceled.
Remove the unnecessary calls to stop any running conversions in the
(*insn_read) and (*do_cmd) functions. The comedi core will only call
these functions if the subdevice is not busy (it has already been
canceled).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This is a PCMCIA driver and interrupts are always shared. Detect if
the hardware did not produce the interrupt and return IRQ_NONE so
that other drivers might handle it.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The interrupt handler is now only used for the ai async command.
Remove the unnecessary 'interrupt_mode' from the private data and
tidy up the interrupt handler.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Interrupts are only needed by this driver to support the analog input async
commands. Don't hook up the command support if pcmcia_request_irq() fails
instead of completely failing the (*auto_attach).
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The comedi (*insn_read) functions are supposed to do simple one-shot
reading of an analog input channel. Currently this driver enables
interrupts and uses wait_for_completion_interruptible() to allow the
interrupt routine to let the analog input (*insn_read) know that
the end-of-conversion has occured.
Simplify the function by using the comedi_timeout() helper to check
the aux status register to see when the conversion is finished.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, and use the BIT macro to define the bits and
define some macros for the timer mode and d/a update bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
All the registers are 8-bit except for the analog output and timer
registers. For clarity, add some comments.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move the bit defines for this register and use the
BIT macro to define the bits. Define a macro for the scanrate bits
and use it to remove the CamelCase. Rename the defines to match the
register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move the bit defines for this register and use the
BIT macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move the bit defines for this register and use the
BIT macro to define the bits. Rename the defines to match the
register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, move the bit defines for this register and use the
BIT macro to define the bits.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename the register map defines and convert the
values to hex. Also, move the private data definition and
DAQP_FIFO_SIZE define after the register definitions.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformat the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function for the common code used to clear any
pending interrupts.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, define a macro for the pacer clock options and rename
the CamelCase.
Remove the unnecessary local variables used to set the control register.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the checkpatch.pl issues about:
CHECK: spaces preferred around that '<<' (ctx:VxV)
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The data link between the D/A data port and the D/A converter is a serial
link. The serial link requires about 8ms to complete a transfer. Use the
comedi_timeout() helper to ensure that there is not a previous transfer
still happening before trying to write new data to the channel.
For aesthetics, save the readback value after updating the hardware.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the comedi_offset_munge() helper to do the offset binary to two's
complement conversion when writing a new analog output value.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Introduce a helper function to get a two's complement sample from
the FIFO and munge it to the offset binary format that comedi uses.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This board has 4 digital inputs not 1. Fix the subdevice init.
The digital input lines are shared with other functions. Add a
comment about this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This board has 4 digital outputs not 1. Fix the subdevice init.
The digital output lines are used for the external channel selection
when the expansion mode is enabled. Add a comment about this.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Change the MODULE_DESCRIPTION to something more usefull than the
generic "Comedi low-level driver".
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
For aesthetics, rename the register map defines so they have namespace
associated with the driver and use the BIT macro to define the bits.
Add the missing defines for the registers and use them to remove the
magic values from the driver.
Add a comment about the extra registers to explain why this driver
doesn't just use the standard 8255 driver instead.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reformat the multi-line comments in the kernel CodingStyle.
Signed-off-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Reviewed-by: Ian Abbott <abbotti@mev.co.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig currently controlling compilation of this code is:
drivers/staging/emxx_udc/Kconfig:config USB_EMXX
drivers/staging/emxx_udc/Kconfig: bool "EMXX USB Function Device Controller"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_platform_driver() uses the same init level priority as
builtin_platform_driver() the init ordering remains unchanged with
this commit.
The .remove function was declared __exit, so it wouldn't have been
available for a sysfs bind/unbind anyway, so lets be explicit here and
use ".suppress_bind_attrs = true" to prevent root from doing something
silly.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: Vincenzo Scotti <vinc94@gmail.com>
Cc: Haneen Mohammed <hamohammed.sa@gmail.com>
Cc: Felipe Balbi <balbi@ti.com>
Cc: Roberta Dobrescu <roberta.dobrescu@gmail.com>
Cc: Tapasweni Pathak <tapaswenipathak@gmail.com>
Cc: Peter Chen <peter.chen@freescale.com>
Cc: Robert Baldyga <r.baldyga@samsung.com>
Cc: Chris Rorvick <chris@rorvick.com>
Cc: "Gujulan Elango, Hari Prasath (H.)" <hgujulan@visteon.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig currently controlling compilation of this code is:
drivers/staging/android/Kconfig:config ANDROID_TIMED_OUTPUT
drivers/staging/android/Kconfig: bool "Timed output class driver"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We replace module.h with init.h and export.h ; the latter since this
file does actually export some symbols.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Riley Andrews <riandrews@android.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig currently controlling compilation of this code is:
drivers/staging/android/Kconfig:config ANDROID_LOW_MEMORY_KILLER
drivers/staging/android/Kconfig: bool "Android Low Memory Killer"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We replace module.h with init.h and moduleparam.h ; the latter since
this file was previously implicitly relying on getting that header.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Riley Andrews <riandrews@android.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig currently controlling compilation of this code is:
staging/android/Kconfig:config SW_SYNC
staging/android/Kconfig: bool "Software synchronization objects"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Riley Andrews <riandrews@android.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The Kconfig currently controlling compilation of this code is:
drivers/staging/android/Kconfig:config ASHMEM
drivers/staging/android/Kconfig: bool "Enable the Anonymous Shared Memory Subsystem"
...meaning that it currently is not being built as a module by anyone.
Lets remove the modular code that is essentially orphaned, so that
when reading the driver there is no doubt it is builtin-only.
Since module_init translates to device_initcall in the non-modular
case, the init ordering remains unchanged with this commit.
We replace module.h with init.h and export.h ; the latter since this
file uses the global THIS_MODULE.
We also delete the MODULE_LICENSE tag etc. since all that information
is already contained at the top of the file in the comments.
Cc: "Arve Hjønnevåg" <arve@android.com>
Cc: Riley Andrews <riandrews@android.com>
Cc: devel@driverdev.osuosl.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
