[ Upstream commit a805a4fa4fa376bbc145762bb8b09caa2fa8af48 ]
Per ZBC and ZAC specifications, host-managed SMR hard-disks mandate that
all writes into sequential write required zones be aligned to the device
physical block size. However, NVMe ZNS does not have this constraint and
allows write operations into sequential zones to be aligned to the
device logical block size. This inconsistency does not help with
software portability across device types.
To solve this, introduce the zone_write_granularity queue limit to
indicate the alignment constraint, in bytes, of write operations into
zones of a zoned block device. This new limit is exported as a
read-only sysfs queue attribute and the helper
blk_queue_zone_write_granularity() introduced for drivers to set this
limit.
The function blk_queue_set_zoned() is modified to set this new limit to
the device logical block size by default. NVMe ZNS devices as well as
zoned nullb devices use this default value as is. The scsi disk driver
is modified to execute the blk_queue_zone_write_granularity() helper to
set the zone write granularity of host-managed SMR disks to the disk
physical block size.
The accessor functions queue_zone_write_granularity() and
bdev_zone_write_granularity() are also introduced.
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@edc.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: c8f6f88d2592 ("block: Clear zone limits for a non-zoned stacked queue")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e00adcadf3af7a8335026d71ab9f0e0a922191ac ]
Add a new method to allow for driver-specific processing when setting or
clearing the block device read-only state. This allows to replace the
cumbersome and error-prone override of the whole ioctl implementation.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: 9674f54e41ff ("md: Don't clear MD_CLOSING when the raid is about to stop")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5429c8de56f6b2bd8f537df3a1e04e67b9c04282 ]
The SED Opal response parsing function response_parse() does not
handle the case of an empty atom in the response. This causes
the entry count to be too high and the response fails to be
parsed. Recognizing, but ignoring, empty atoms allows response
handling to succeed.
Signed-off-by: Greg Joyce <gjoyce@linux.ibm.com>
Link: https://lore.kernel.org/r/20240216210417.3526064-2-gjoyce@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a427b49d02995ea4a6ff93a1432c40fa4d36821 ]
When iocg_kick_delay() is called from a CPU different than the one which set
the delay, @now may be in the past of @iocg->delay_at leading to the
following warning:
UBSAN: shift-out-of-bounds in block/blk-iocost.c:1359:23
shift exponent 18446744073709 is too large for 64-bit type 'u64' (aka 'unsigned long long')
...
Call Trace:
<TASK>
dump_stack_lvl+0x79/0xc0
__ubsan_handle_shift_out_of_bounds+0x2ab/0x300
iocg_kick_delay+0x222/0x230
ioc_rqos_merge+0x1d7/0x2c0
__rq_qos_merge+0x2c/0x80
bio_attempt_back_merge+0x83/0x190
blk_attempt_plug_merge+0x101/0x150
blk_mq_submit_bio+0x2b1/0x720
submit_bio_noacct_nocheck+0x320/0x3e0
__swap_writepage+0x2ab/0x9d0
The underflow itself doesn't really affect the behavior in any meaningful
way; however, the past timestamp may exaggerate the delay amount calculated
later in the code, which shouldn't be a material problem given the nature of
the delay mechanism.
If @now is in the past, this CPU is racing another CPU which recently set up
the delay and there's nothing this CPU can contribute w.r.t. the delay.
Let's bail early from iocg_kick_delay() in such cases.
Reported-by: Breno Leitão <leitao@debian.org>
Signed-off-by: Tejun Heo <tj@kernel.org>
Fixes: 5160a5a53c ("blk-iocost: implement delay adjustment hysteresis")
Link: https://lore.kernel.org/r/ZVvc9L_CYk5LO1fT@slm.duckdns.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5266caaf5660529e3da53004b8b7174cab6374ed ]
In blk_mq_mark_tag_wait(), __add_wait_queue() may be re-ordered
with the following blk_mq_get_driver_tag() in case of getting driver
tag failure.
Then in __sbitmap_queue_wake_up(), waitqueue_active() may not observe
the added waiter in blk_mq_mark_tag_wait() and wake up nothing, meantime
blk_mq_mark_tag_wait() can't get driver tag successfully.
This issue can be reproduced by running the following test in loop, and
fio hang can be observed in < 30min when running it on my test VM
in laptop.
modprobe -r scsi_debug
modprobe scsi_debug delay=0 dev_size_mb=4096 max_queue=1 host_max_queue=1 submit_queues=4
dev=`ls -d /sys/bus/pseudo/drivers/scsi_debug/adapter*/host*/target*/*/block/* | head -1 | xargs basename`
fio --filename=/dev/"$dev" --direct=1 --rw=randrw --bs=4k --iodepth=1 \
--runtime=100 --numjobs=40 --time_based --name=test \
--ioengine=libaio
Fix the issue by adding one explicit barrier in blk_mq_mark_tag_wait(), which
is just fine in case of running out of tag.
Cc: Jan Kara <jack@suse.cz>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20240112122626.4181044-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f034c374ad55773c12dd8f3c1607328e17c0072 ]
Reordered a check to avoid a possible overflow when adding len to bv_len.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20231204173419.782378-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1b151e2435fc3a9b10c8946c6aebe9f3e1938c55 upstream.
The special casing was originally added in pre-git history; reproducing
the commit log here:
> commit a318a92567d77
> Author: Andrew Morton <akpm@osdl.org>
> Date: Sun Sep 21 01:42:22 2003 -0700
>
> [PATCH] Speed up direct-io hugetlbpage handling
>
> This patch short-circuits all the direct-io page dirtying logic for
> higher-order pages. Without this, we pointlessly bounce BIOs up to
> keventd all the time.
In the last twenty years, compound pages have become used for more than
just hugetlb. Rewrite these functions to operate on folios instead
of pages and remove the special case for hugetlbfs; I don't think
it's needed any more (and if it is, we can put it back in as a call
to folio_test_hugetlb()).
This was found by inspection; as far as I can tell, this bug can lead
to pages used as the destination of a direct I/O read not being marked
as dirty. If those pages are then reclaimed by the MM without being
dirtied for some other reason, they won't be written out. Then when
they're faulted back in, they will not contain the data they should.
It'll take a pretty unusual setup to produce this problem with several
races all going the wrong way.
This problem predates the folio work; it could for example have been
triggered by mmaping a THP in tmpfs and using that as the target of an
O_DIRECT read.
Fixes: 800d8c63b2 ("shmem: add huge pages support")
Cc: <stable@vger.kernel.org>
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 27b13e209ddca5979847a1b57890e0372c1edcee ]
Inside blkg_for_each_descendant_pre(), both
css_for_each_descendant_pre() and blkg_lookup() requires RCU read lock,
and either cgroup_assert_mutex_or_rcu_locked() or rcu_read_lock_held()
is called.
Fix the warning by adding rcu read lock.
Reported-by: Changhui Zhong <czhong@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20231117023527.3188627-2-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d36a9ea5e7766961e753ee38d4c331bbe6ef659b upstream.
For blk-mq, queue release handler is usually called after
blk_mq_freeze_queue_wait() returns. However, the
q_usage_counter->release() handler may not be run yet at that time, so
this can cause a use-after-free.
Fix the issue by moving percpu_ref_exit() into blk_free_queue_rcu().
Since ->release() is called with rcu read lock held, it is agreed that
the race should be covered in caller per discussion from the two links.
Reported-by: Zhang Wensheng <zhangwensheng@huaweicloud.com>
Reported-by: Zhong Jinghua <zhongjinghua@huawei.com>
Link: https://lore.kernel.org/linux-block/Y5prfOjyyjQKUrtH@T590/T/#u
Link: https://lore.kernel.org/lkml/Y4%2FmzMd4evRg9yDi@fedora/
Cc: Hillf Danton <hdanton@sina.com>
Cc: Yu Kuai <yukuai3@huawei.com>
Cc: Dennis Zhou <dennis@kernel.org>
Fixes: 2b0d3d3e4f ("percpu_ref: reduce memory footprint of percpu_ref in fast path")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221215021629.74870-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Saranya Muruganandam <saranyamohan@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7eb1e47696aa231b1a567846bbe3a1e1befe1854 upstream.
Making 'blk' sector_t (i.e. 64 bit if LBD support is active) fails the
'blk>0' test in the partition block loop if a value of (signed int) -1 is
used to mark the end of the partition block list.
Explicitly cast 'blk' to signed int to allow use of -1 to terminate the
partition block linked list.
Fixes: b6f3f28f604b ("block: add overflow checks for Amiga partition support")
Reported-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Link: https://lore.kernel.org/r/024ce4fa-cc6d-50a2-9aae-3701d0ebf668@xenosoft.de
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Martin Steigerwald <martin@lichtvoll.de>
Tested-by: Christian Zigotzky <chzigotzky@xenosoft.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b6f3f28f604ba3de4724ad82bea6adb1300c0b5f upstream.
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use u64 as type for sector address and size to allow using disks up to
2 TB without LBD support, and disks larger than 2 TB with LBD. The RBD
format allows to specify disk sizes up to 2^128 bytes (though native
OS limitations reduce this somewhat, to max 2^68 bytes), so check for
u64 overflow carefully to protect against overflowing sector_t.
Bail out if sector addresses overflow 32 bits on kernels without LBD
support.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted (now resubmitted as patch 1 in this series).
This patch adds additional error checking and warning messages.
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@infradead.org>
Link: https://lore.kernel.org/r/20230620201725.7020-4-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc3d092c6bb48d5865fec15ed5b333c12f36288c upstream.
The Amiga partition parser module uses signed int for partition sector
address and count, which will overflow for disks larger than 1 TB.
Use sector_t as type for sector address and size to allow using disks
up to 2 TB without LBD support, and disks larger than 2 TB with LBD.
This bug was reported originally in 2012, and the fix was created by
the RDB author, Joanne Dow <jdow@earthlink.net>. A patch had been
discussed and reviewed on linux-m68k at that time but never officially
submitted. This patch differs from Joanne's patch only in its use of
sector_t instead of unsigned int. No checking for overflows is done
(see patch 3 of this series for that).
Reported-by: Martin Steigerwald <Martin@lichtvoll.de>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=43511
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Message-ID: <201206192146.09327.Martin@lichtvoll.de>
Cc: <stable@vger.kernel.org> # 5.2
Signed-off-by: Michael Schmitz <schmitzmic@gmail.com>
Tested-by: Martin Steigerwald <Martin@lichtvoll.de>
Reviewed-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230620201725.7020-2-schmitzmic@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ff1cc97b1f4c10db224f276d9615b22835b8c424 upstream.
Since gcc13, each member of an enum has the same type as the enum [1]. And
that is inherited from its members. Provided:
VTIME_PER_SEC_SHIFT = 37,
VTIME_PER_SEC = 1LLU << VTIME_PER_SEC_SHIFT,
...
AUTOP_CYCLE_NSEC = 10LLU * NSEC_PER_SEC,
the named type is unsigned long.
This generates warnings with gcc-13:
block/blk-iocost.c: In function 'ioc_weight_prfill':
block/blk-iocost.c:3037:37: error: format '%u' expects argument of type 'unsigned int', but argument 4 has type 'long unsigned int'
block/blk-iocost.c: In function 'ioc_weight_show':
block/blk-iocost.c:3047:34: error: format '%u' expects argument of type 'unsigned int', but argument 3 has type 'long unsigned int'
So split the anonymous enum with large values to a separate enum, so
that they don't affect other members.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=36113
Cc: Martin Liska <mliska@suse.cz>
Cc: Tejun Heo <tj@kernel.org>
Cc: Josef Bacik <josef@toxicpanda.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: cgroups@vger.kernel.org
Cc: linux-block@vger.kernel.org
Signed-off-by: Jiri Slaby (SUSE) <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20221213120826.17446-1-jirislaby@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f2779dfa7b8cc7dfd4a1b6586d86e0d193266f3 upstream.
The behavior of 'enum' types has changed in gcc-13, so now the
UNBUSY_THR_PCT constant is interpreted as a 64-bit number because
it is defined as part of the same enum definition as some other
constants that do not fit within a 32-bit integer. This in turn
leads to some inefficient code on 32-bit architectures as well
as a link error:
arm-linux-gnueabi/bin/arm-linux-gnueabi-ld: block/blk-iocost.o: in function `ioc_timer_fn':
blk-iocost.c:(.text+0x68e8): undefined reference to `__aeabi_uldivmod'
arm-linux-gnueabi-ld: blk-iocost.c:(.text+0x6908): undefined reference to `__aeabi_uldivmod'
Split the enum definition to keep the 64-bit timing constants in
a separate enum type from those constants that can clearly fit
within a smaller type.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230118080706.3303186-1-arnd@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c7cb94452901a93e90c2230632e2c12a681bc92 upstream.
If blk_crypto_evict_key() sees that the key is still in-use (due to a
bug) or that ->keyslot_evict failed, it currently just returns while
leaving the key linked into the keyslot management structures.
However, blk_crypto_evict_key() is only called in contexts such as inode
eviction where failure is not an option. So actually the caller
proceeds with freeing the blk_crypto_key regardless of the return value
of blk_crypto_evict_key().
These two assumptions don't match, and the result is that there can be a
use-after-free in blk_crypto_reprogram_all_keys() after one of these
errors occurs. (Note, these errors *shouldn't* happen; we're just
talking about what happens if they do anyway.)
Fix this by making blk_crypto_evict_key() unlink the key from the
keyslot management structures even on failure.
Also improve some comments.
Fixes: 1b26283970 ("block: Keyslot Manager for Inline Encryption")
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70493a63ba04f754f7a7dd53a4fcc82700181490 upstream.
blk_crypto_evict_key() is only called in contexts such as inode eviction
where failure is not an option. So there is nothing the caller can do
with errors except log them. (dm-table.c does "use" the error code, but
only to pass on to upper layers, so it doesn't really count.)
Just make blk_crypto_evict_key() return void and log errors itself.
Cc: stable@vger.kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9cd1e566676bbcb8a126acd921e4e194e6339603 upstream.
Once all I/O using a blk_crypto_key has completed, filesystems can call
blk_crypto_evict_key(). However, the block layer currently doesn't call
blk_crypto_put_keyslot() until the request is being freed, which happens
after upper layers have been told (via bio_endio()) the I/O has
completed. This causes a race condition where blk_crypto_evict_key()
can see 'slot_refs != 0' without there being an actual bug.
This makes __blk_crypto_evict_key() hit the
'WARN_ON_ONCE(atomic_read(&slot->slot_refs) != 0)' and return without
doing anything, eventually causing a use-after-free in
blk_crypto_reprogram_all_keys(). (This is a very rare bug and has only
been seen when per-file keys are being used with fscrypt.)
There are two options to fix this: either release the keyslot before
bio_endio() is called on the request's last bio, or make
__blk_crypto_evict_key() ignore slot_refs. Let's go with the first
solution, since it preserves the ability to report bugs (via
WARN_ON_ONCE) where a key is evicted while still in-use.
Fixes: a892c8d52c ("block: Inline encryption support for blk-mq")
Cc: stable@vger.kernel.org
Reviewed-by: Nathan Huckleberry <nhuck@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20230315183907.53675-2-ebiggers@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b600de2d7d3a16f9007fad1bdae82a3951a26af2 ]
After commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'"),
bic->bfqq will be accessed in bic_set_bfqq(), however, in some context
bic->bfqq will be freed, and bic_set_bfqq() is called with the freed
bic->bfqq.
Fix the problem by always freeing bfqq after bic_set_bfqq().
Fixes: 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
Reported-and-tested-by: Shinichiro Kawasaki <shinichiro.kawasaki@wdc.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230130014136.591038-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 337366e02b370d2800110fbc99940f6ddddcbdfa ]
Just to make the code a litter cleaner, there are no functional changes.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221214033155.3455754-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Stable-dep-of: b600de2d7d3a ("block, bfq: fix uaf for bfqq in bic_set_bfqq()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 246cf66e300b76099b5dbd3fdd39e9a5dbc53f02 ]
Commit 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
will access 'bic->bfqq' in bic_set_bfqq(), however, bfq_exit_icq_bfqq()
can free bfqq first, and then call bic_set_bfqq(), which will cause uaf.
Fix the problem by moving bfq_exit_bfqq() behind bic_set_bfqq().
Fixes: 64dc8c732f5c ("block, bfq: fix possible uaf for 'bfqq->bic'")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20221226030605.1437081-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64dc8c732f5c2b406cc752e6aaa1bd5471159cab ]
Our test report a uaf for 'bfqq->bic' in 5.10:
==================================================================
BUG: KASAN: use-after-free in bfq_select_queue+0x378/0xa30
CPU: 6 PID: 2318352 Comm: fsstress Kdump: loaded Not tainted 5.10.0-60.18.0.50.h602.kasan.eulerosv2r11.x86_64 #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.1-0-ga5cab58-20220320_160524-szxrtosci10000 04/01/2014
Call Trace:
bfq_select_queue+0x378/0xa30
bfq_dispatch_request+0xe8/0x130
blk_mq_do_dispatch_sched+0x62/0xb0
__blk_mq_sched_dispatch_requests+0x215/0x2a0
blk_mq_sched_dispatch_requests+0x8f/0xd0
__blk_mq_run_hw_queue+0x98/0x180
__blk_mq_delay_run_hw_queue+0x22b/0x240
blk_mq_run_hw_queue+0xe3/0x190
blk_mq_sched_insert_requests+0x107/0x200
blk_mq_flush_plug_list+0x26e/0x3c0
blk_finish_plug+0x63/0x90
__iomap_dio_rw+0x7b5/0x910
iomap_dio_rw+0x36/0x80
ext4_dio_read_iter+0x146/0x190 [ext4]
ext4_file_read_iter+0x1e2/0x230 [ext4]
new_sync_read+0x29f/0x400
vfs_read+0x24e/0x2d0
ksys_read+0xd5/0x1b0
do_syscall_64+0x33/0x40
entry_SYSCALL_64_after_hwframe+0x61/0xc6
Commit 3bc5e683c67d ("bfq: Split shared queues on move between cgroups")
changes that move process to a new cgroup will allocate a new bfqq to
use, however, the old bfqq and new bfqq can point to the same bic:
1) Initial state, two process with io in the same cgroup.
Process 1 Process 2
(BIC1) (BIC2)
| Λ | Λ
| | | |
V | V |
bfqq1 bfqq2
2) bfqq1 is merged to bfqq2.
Process 1 Process 2
(BIC1) (BIC2)
| |
\-------------\|
V
bfqq1 bfqq2(coop)
3) Process 1 exit, then issue new io(denoce IOA) from Process 2.
(BIC2)
| Λ
| |
V |
bfqq2(coop)
4) Before IOA is completed, move Process 2 to another cgroup and issue io.
Process 2
(BIC2)
Λ
|\--------------\
| V
bfqq2 bfqq3
Now that BIC2 points to bfqq3, while bfqq2 and bfqq3 both point to BIC2.
If all the requests are completed, and Process 2 exit, BIC2 will be
freed while there is no guarantee that bfqq2 will be freed before BIC2.
Fix the problem by clearing bfqq->bic while bfqq is detached from bic.
Fixes: 3bc5e683c67d ("bfq: Split shared queues on move between cgroups")
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221214030430.3304151-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 984af1e66b4126cf145153661cc24c213e2ec231 ]
echo max of u64 to cost.model can cause divide by 0 error.
# echo 8:0 rbps=18446744073709551615 > /sys/fs/cgroup/io.cost.model
divide error: 0000 [#1] PREEMPT SMP
RIP: 0010:calc_lcoefs+0x4c/0xc0
Call Trace:
<TASK>
ioc_refresh_params+0x2b3/0x4f0
ioc_cost_model_write+0x3cb/0x4c0
? _copy_from_iter+0x6d/0x6c0
? kernfs_fop_write_iter+0xfc/0x270
cgroup_file_write+0xa0/0x200
kernfs_fop_write_iter+0x17d/0x270
vfs_write+0x414/0x620
ksys_write+0x73/0x160
__x64_sys_write+0x1e/0x30
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
calc_lcoefs() uses the input value of cost.model in DIV_ROUND_UP_ULL,
overflow would happen if bps plus IOC_PAGE_SIZE is greater than
ULLONG_MAX, it can cause divide by 0 error.
Fix the problem by setting basecost
Signed-off-by: Li Nan <linan122@huawei.com>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230117070806.3857142-5-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b6a4bdcda430e3ca43bbb9cb1d4d4d34ebe15c40 ]
Make sure to copy the flags when a bio_integrity_payload is cloned.
Otherwise per-I/O properties such as IP checksum flag will not be
passed down to the HBA driver. Since the integrity buffer is owned by
the original bio, the BIP_BLOCK_INTEGRITY flag needs to be masked off
to avoid a double free in the completion path.
Fixes: aae7df5019 ("block: Integrity checksum flag")
Fixes: b1f0138857 ("block: Relocate bio integrity flags")
Reported-by: Saurav Kashyap <skashyap@marvell.com>
Tested-by: Saurav Kashyap <skashyap@marvell.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20230215171801.21062-1-martin.petersen@oracle.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01542f651a9f58a9b176c3d3dc3eefbacee53b78 ]
Commit 88022d7201 ("blk-mq: don't handle failure in .get_budget")
remove BLK_STS_RESOURCE return value and we only check if we can get
the budget from .get_budget() now.
Correct stale comment that ".get_budget() returns BLK_STS_NO_RESOURCE"
to ".get_budget() fails to get the budget".
Fixes: 88022d7201 ("blk-mq: don't handle failure in .get_budget")
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c31e76bcc379182fe67a82c618493b7b8868c672 ]
Commit 97889f9ac2 ("blk-mq: remove synchronize_rcu() from
blk_mq_del_queue_tag_set()") remove handle of TAG_SHARED in restart,
then shared_hctx_restart counted for how many hardware queues are marked
for restart is removed too.
Remove the stale comment that we still count hardware queues need restart.
Fixes: 97889f9ac2 ("blk-mq: remove synchronize_rcu() from blk_mq_del_queue_tag_set()")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ee858a3d3270a68902d66bb47c151a83622535c ]
Commit 1f5bd336b9 ("blk-mq: add blk_mq_alloc_request_hctx") add
blk_mq_alloc_request_hctx to send commands to a specific queue. If
BLK_MQ_REQ_NOWAIT is not set in tag allocation, we may change to different
hctx after sleep and get tag from unexpected hctx. So BLK_MQ_REQ_NOWAIT
must be set in flags for blk_mq_alloc_request_hctx.
After commit 600c3b0cea ("blk-mq: open code __blk_mq_alloc_request in
blk_mq_alloc_request_hctx"), blk_mq_alloc_request_hctx return -EINVAL
if both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED are not set instead of
if BLK_MQ_REQ_NOWAIT is not set. So if BLK_MQ_REQ_NOWAIT is not set and
BLK_MQ_REQ_RESERVED is set, blk_mq_alloc_request_hctx could alloc tag
from unexpected hctx. I guess what we need here is that return -EINVAL
if either BLK_MQ_REQ_NOWAIT or BLK_MQ_REQ_RESERVED is not set.
Currently both BLK_MQ_REQ_NOWAIT and BLK_MQ_REQ_RESERVED will be set if
specific hctx is needed in nvme_auth_submit, nvmf_connect_io_queue
and nvmf_connect_admin_queue. Fix the potential BLK_MQ_REQ_NOWAIT missed
case in future.
Fixes: 600c3b0cea ("blk-mq: open code __blk_mq_alloc_request in blk_mq_alloc_request_hctx")
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Kemeng Shi <shikemeng@huaweicloud.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3ff8887e7db757360f97634e0d6f4b8e27a8c46 ]
If the policy defines pd_online_fn(), it should be called after
pd_init_fn(), like blkg_create().
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20230103112833.2013432-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 57e95e4670d1126c103305bcf34a9442f49f6d6a upstream.
Don't use a WARN_ON when printing a potentially user triggered
condition. Also don't print the partno when the block device name
already includes it, and use the %pg specifier to simplify printing
the block device name.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220304180105.409765-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
v5.11 changes the blkdev lookup mechanism completely since commit
22ae8ce8b892 ("block: simplify bdev/disk lookup in blkdev_get"),
and small part of the change is to unhash part bdev inode when
deleting partition. Turns out this kind of change does fix one
nasty issue in case of BLOCK_EXT_MAJOR:
1) when one partition is deleted & closed, disk_put_part() is always
called before bdput(bdev), see blkdev_put(); so the part's devt can
be freed & re-used before the inode is dropped
2) then new partition with same devt can be created just before the
inode in 1) is dropped, then the old inode/bdev structurein 1) is
re-used for this new partition, this way causes use-after-free and
kernel panic.
It isn't possible to backport the whole big patchset of "merge struct
block_device and struct hd_struct v4" for addressing this issue.
https://lore.kernel.org/linux-block/20201128161510.347752-1-hch@lst.de/
So fixes it by unhashing part bdev in delete_partition(), and this way
is actually aligned with v5.11+'s behavior.
Reported-by: Shiwei Cui <cuishw@inspur.com>
Tested-by: Shiwei Cui <cuishw@inspur.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Jan Kara <jack@suse.cz>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Acked-by: Jens Axboe <axboe@kernel.dk>
[ Upstream commit f829230dd51974c1f4478900ed30bb77ba530b40 ]
In accordance with [1] the DMA-able memory buffers must be
cacheline-aligned otherwise the cache writing-back and invalidation
performed during the mapping may cause the adjacent data being lost. It's
specifically required for the DMA-noncoherent platforms [2]. Seeing the
opal_dev.{cmd,resp} buffers are implicitly used for DMAs in the NVME and
SCSI/SD drivers in framework of the nvme_sec_submit() and sd_sec_submit()
methods respectively they must be cacheline-aligned to prevent the denoted
problem. One of the option to guarantee that is to kmalloc the buffers
[2]. Let's explicitly allocate them then instead of embedding into the
opal_dev structure instance.
Note this fix was inspired by the commit c94b7f9bab22 ("nvme-hwmon:
kmalloc the NVME SMART log buffer").
[1] Documentation/core-api/dma-api.rst
[2] Documentation/core-api/dma-api-howto.rst
Fixes: 455a7b238c ("block: Add Sed-opal library")
Signed-off-by: Serge Semin <Sergey.Semin@baikalelectronics.ru>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20221107203944.31686-1-Sergey.Semin@baikalelectronics.ru
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 181490d5321806e537dc5386db5ea640b826bf78 upstream.
If bfq_schedule_dispatch() is called from bfq_idle_slice_timer_body(),
then 'bfqd->queued' is read without holding 'bfqd->lock'. This is
wrong since it can be wrote concurrently.
Fix the problem by holding 'bfqd->lock' in such case.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Reviewed-by: Chaitanya Kulkarni <kch@nvidia.com>
Link: https://lore.kernel.org/r/20220513023507.2625717-2-yukuai3@huawei.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Cc: Khazhy Kumykov <khazhy@chromium.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 285febabac4a16655372d23ff43e89ff6f216691 upstream.
commit 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is
initialized") moves wbt_set_write_cache() before rq_qos_add(), which
is wrong because wbt_rq_qos() is still NULL.
Fix the problem by removing wbt_set_write_cache() and setting 'rwb->wc'
directly. Noted that this patch also remove the redundant setting of
'rab->wc'.
Fixes: 8c5035dfbb94 ("blk-wbt: call rq_qos_add() after wb_normal is initialized")
Reported-by: kernel test robot <yujie.liu@intel.com>
Link: https://lore.kernel.org/r/202210081045.77ddf59b-yujie.liu@intel.com
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20221009101038.1692875-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8c5035dfbb9475b67c82b3fdb7351236525bf52b upstream.
Our test found a problem that wbt inflight counter is negative, which
will cause io hang(noted that this problem doesn't exist in mainline):
t1: device create t2: issue io
add_disk
blk_register_queue
wbt_enable_default
wbt_init
rq_qos_add
// wb_normal is still 0
/*
* in mainline, disk can't be opened before
* bdev_add(), however, in old kernels, disk
* can be opened before blk_register_queue().
*/
blkdev_issue_flush
// disk size is 0, however, it's not checked
submit_bio_wait
submit_bio
blk_mq_submit_bio
rq_qos_throttle
wbt_wait
bio_to_wbt_flags
rwb_enabled
// wb_normal is 0, inflight is not increased
wbt_queue_depth_changed(&rwb->rqos);
wbt_update_limits
// wb_normal is initialized
rq_qos_track
wbt_track
rq->wbt_flags |= bio_to_wbt_flags(rwb, bio);
// wb_normal is not 0，wbt_flags will be set
t3: io completion
blk_mq_free_request
rq_qos_done
wbt_done
wbt_is_tracked
// return true
__wbt_done
wbt_rqw_done
atomic_dec_return(&rqw->inflight);
// inflight is decreased
commit 8235b5c1e8c1 ("block: call bdev_add later in device_add_disk") can
avoid this problem, however it's better to fix this problem in wbt:
1) Lower kernel can't backport this patch due to lots of refactor.
2) Root cause is that wbt call rq_qos_add() before wb_normal is
initialized.
Fixes: e34cbd3074 ("blk-wbt: add general throttling mechanism")
Cc: <stable@vger.kernel.org>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20220913105749.3086243-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5a20d073ec54a72d9a732fa44bfe14954eb6332f upstream.
It's unnecessary to call wbt_update_limits explicitly within wbt_init,
because it will be called in the following function wbt_queue_depth_changed.
Signed-off-by: Lei Chen <lennychen@tencent.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 8d6bbaada2e0a65f9012ac4c2506460160e7237a ]
There is a problem found by code review in tg_with_in_bps_limit() that
'bps_limit * jiffy_elapsed_rnd' might overflow. Fix the problem by
calling mul_u64_u64_div_u64() instead.
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Acked-by: Tejun Heo <tj@kernel.org>
Link: https://lore.kernel.org/r/20220829022240.3348319-3-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b0d97557ebfc9d5ba5f2939339a9fdd267abafeb upstream.
The inflight of partition 0 doesn't include inflight IOs to all
sub-partitions, since currently mq calculates inflight of specific
partition by simply camparing the value of the partition pointer.
Thus the following case is possible:
$ cat /sys/block/vda/inflight
0 0
$ cat /sys/block/vda/vda1/inflight
0 128
While single queue device (on a previous version, e.g. v3.10) has no
this issue:
$cat /sys/block/sda/sda3/inflight
0 33
$cat /sys/block/sda/inflight
0 33
Partition 0 should be specially handled since it represents the whole
disk. This issue is introduced since commit bf0ddaba65 ("blk-mq: fix
sysfs inflight counter").
Besides, this patch can also fix the inflight statistics of part 0 in
/proc/diskstats. Before this patch, the inflight statistics of part 0
doesn't include that of sub partitions. (I have marked the 'inflight'
field with asterisk.)
$cat /proc/diskstats
259 0 nvme0n1 45974469 0 367814768 6445794 1 0 1 0 *0* 111062 6445794 0 0 0 0 0 0
259 2 nvme0n1p1 45974058 0 367797952 6445727 0 0 0 0 *33* 111001 6445727 0 0 0 0 0 0
This is introduced since commit f299b7c7a9 ("blk-mq: provide internal
in-flight variant").
Fixes: bf0ddaba65 ("blk-mq: fix sysfs inflight counter")
Fixes: f299b7c7a9 ("blk-mq: provide internal in-flight variant")
Signed-off-by: Jeffle Xu <jefflexu@linux.alibaba.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
[axboe: adapt for 5.11 partition change]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
[khazhy: adapt for 5.10 partition]
Signed-off-by: Khazhismel Kumykov <khazhy@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 65fac0d54f374625b43a9d6ad1f2c212bd41f518 upstream.
Currently, in virtio_scsi, if 'bd->last' is not set to true while
dispatching request, such io will stay in driver's queue, and driver
will wait for block layer to dispatch more rqs. However, if block
layer failed to dispatch more rq, it should trigger commit_rqs to
inform driver.
There is a problem in blk_mq_try_issue_list_directly() that commit_rqs
won't be called:
// assume that queue_depth is set to 1, list contains two rq
blk_mq_try_issue_list_directly
blk_mq_request_issue_directly
// dispatch first rq
// last is false
__blk_mq_try_issue_directly
blk_mq_get_dispatch_budget
// succeed to get first budget
__blk_mq_issue_directly
scsi_queue_rq
cmd->flags |= SCMD_LAST
virtscsi_queuecommand
kick = (sc->flags & SCMD_LAST) != 0
// kick is false, first rq won't issue to disk
queued++
blk_mq_request_issue_directly
// dispatch second rq
__blk_mq_try_issue_directly
blk_mq_get_dispatch_budget
// failed to get second budget
ret == BLK_STS_RESOURCE
blk_mq_request_bypass_insert
// errors is still 0
if (!list_empty(list) || errors && ...)
// won't pass, commit_rqs won't be called
In this situation, first rq relied on second rq to dispatch, while
second rq relied on first rq to complete, thus they will both hung.
Fix the problem by also treat 'BLK_STS_*RESOURCE' as 'errors' since
it means that request is not queued successfully.
Same problem exists in blk_mq_dispatch_rq_list(), 'BLK_STS_*RESOURCE'
can't be treated as 'errors' here, fix the problem by calling
commit_rqs if queue_rq return 'BLK_STS_*RESOURCE'.
Fixes: d666ba98f8 ("blk-mq: add mq_ops->commit_rqs()")
Signed-off-by: Yu Kuai <yukuai3@huawei.com>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220726122224.1790882-1-yukuai1@huaweicloud.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a54895fa057c67700270777f7661d8d3c7fda88a ]
The request_queue can trivially be derived from the request.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Hannes Reinecke <hare@suse.de>
Reviewed-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f3ec5d11554778c24ac8915e847223ed71d104fc ]
blk_mq_debugfs_register_hctx() can be called by blk_mq_update_nr_hw_queues
when gendisk isn't added yet, such as nvme tcp.
Fixes the warning of 'debugfs: Directory 'hctx0' with parent '/' already present!'
which can be observed reliably when running blktests nvme/005.
Fixes: 6cfc0081b0 ("blk-mq: no need to check return value of debugfs_create functions")
Reported-by: Yi Zhang <yi.zhang@redhat.com>
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Tested-by: Yi Zhang <yi.zhang@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220711090808.259682-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b82d9fa257cb3725c49d94d2aeafc4677c34448a ]
Returning 0 early from __bio_iov_append_get_pages() for the
max_append_sectors warning just creates an infinite loop since 0 means
success, and the bio will never fill from the unadvancing iov_iter. We
could turn the return into an error value, but it will already be turned
into an error value later on, so just remove the warning. Clearly no one
ever hit it anyway.
Fixes: 0512a75b98 ("block: Introduce REQ_OP_ZONE_APPEND")
Signed-off-by: Keith Busch <kbusch@kernel.org>
Reviewed-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Link: https://lore.kernel.org/r/20220610195830.3574005-2-kbusch@fb.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 14dc7a18abbe4176f5626c13c333670da8e06aa1 ]
This patch prevents that test nvme/004 triggers the following:
UBSAN: array-index-out-of-bounds in block/blk-mq.h:135:9
index 512 is out of range for type 'long unsigned int [512]'
Call Trace:
show_stack+0x52/0x58
dump_stack_lvl+0x49/0x5e
dump_stack+0x10/0x12
ubsan_epilogue+0x9/0x3b
__ubsan_handle_out_of_bounds.cold+0x44/0x49
blk_mq_alloc_request_hctx+0x304/0x310
__nvme_submit_sync_cmd+0x70/0x200 [nvme_core]
nvmf_connect_io_queue+0x23e/0x2a0 [nvme_fabrics]
nvme_loop_connect_io_queues+0x8d/0xb0 [nvme_loop]
nvme_loop_create_ctrl+0x58e/0x7d0 [nvme_loop]
nvmf_create_ctrl+0x1d7/0x4d0 [nvme_fabrics]
nvmf_dev_write+0xae/0x111 [nvme_fabrics]
vfs_write+0x144/0x560
ksys_write+0xb7/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x44/0xae
Cc: Christoph Hellwig <hch@lst.de>
Cc: Ming Lei <ming.lei@redhat.com>
Fixes: 20e4d81393 ("blk-mq: simplify queue mapping & schedule with each possisble CPU")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20220615210004.1031820-1-bvanassche@acm.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 22b106e5355d6e7a9c3b5cb5ed4ef22ae585ea94 upstream.
Commit d92c370a16 ("block: really clone the block cgroup in
bio_clone_blkg_association") changed bio_clone_blkg_association() to
just clone bio->bi_blkg reference from source to destination bio. This
is however wrong if the source and destination bios are against
different block devices because struct blkcg_gq is different for each
bdev-blkcg pair. This will result in IOs being accounted (and throttled
as a result) multiple times against the same device (src bdev) while
throttling of the other device (dst bdev) is ignored. In case of BFQ the
inconsistency can even result in crashes in bfq_bic_update_cgroup().
Fix the problem by looking up correct blkcg_gq for the cloned bio.
Reported-by: Logan Gunthorpe <logang@deltatee.com>
Reported-and-tested-by: Donald Buczek <buczek@molgen.mpg.de>
Fixes: d92c370a16 ("block: really clone the block cgroup in bio_clone_blkg_association")
CC: stable@vger.kernel.org
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20220602081242.7731-1-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 075a53b78b815301f8d3dd1ee2cd99554e34f0dd upstream.
Bios queued into BFQ IO scheduler can be associated with a cgroup that
was already offlined. This may then cause insertion of this bfq_group
into a service tree. But this bfq_group will get freed as soon as last
bio associated with it is completed leading to use after free issues for
service tree users. Fix the problem by making sure we always operate on
online bfq_group. If the bfq_group associated with the bio is not
online, we pick the first online parent.
CC: stable@vger.kernel.org
Fixes: e21b7a0b98 ("block, bfq: add full hierarchical scheduling and cgroups support")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-9-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e54a2493e582361adc3bfbf06c7d50d19d18837 upstream.
BFQ usage of __bio_blkcg() is a relict from the past. Furthermore if bio
would not be associated with any blkcg, the usage of __bio_blkcg() in
BFQ is prone to races with the task being migrated between cgroups as
__bio_blkcg() calls at different places could return different blkcgs.
Convert BFQ to the new situation where bio->bi_blkg is initialized in
bio_set_dev() and thus practically always valid. This allows us to save
blkcg_gq lookup and noticeably simplify the code.
CC: stable@vger.kernel.org
Fixes: 0fe061b9f0 ("blkcg: fix ref count issue with bio_blkcg() using task_css")
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-8-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5f550ede5edf846ecc0067be1ba80514e6fe7f8e upstream.
We call bfq_init_rq() from request merging functions where requests we
get should have already gone through bfq_init_rq() during insert and
anyway we want to do anything only if the request is already tracked by
BFQ. So replace calls to bfq_init_rq() with RQ_BFQQ() instead to simply
skip requests untracked by BFQ. We move bfq_init_rq() call in
bfq_insert_request() a bit earlier to cover request merging and thus
can transfer FIFO position in case of a merge.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-6-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc84e1f941b91221092da5b3102ec82da24c5673 upstream.
In bfq_insert_request() we unlock bfqd->lock only to call
trace_block_rq_insert() and then lock bfqd->lock again. This is really
pointless since tracing is disabled if we really care about performance
and even if the tracepoint is enabled, it is a quick call.
CC: stable@vger.kernel.org
Tested-by: "yukuai (C)" <yukuai3@huawei.com>
Signed-off-by: Jan Kara <jack@suse.cz>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20220401102752.8599-5-jack@suse.cz
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
