[ Upstream commit 7ca26efb09a1543fddb29308ea3b63b66cb5d3ee ]
The IRQ injection work used spin_lock_irq() to protect the
scheduling of the softirq, but spin_lock_bh() should be
used.
With spin_lock_irq(), we noticed delay of more than 6
seconds between the time a NAPI polling work is scheduled
and the time it is executed.
Fixes: c8a6153b6c ("vduse: Introduce VDUSE - vDPA Device in Userspace")
Cc: xieyongji@bytedance.com
Suggested-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Maxime Coquelin <maxime.coquelin@redhat.com>
Message-Id: <20230705114505.63274-1-maxime.coquelin@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Reviewed-by: Xie Yongji <xieyongji@bytedance.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55c91fedd03d7b9cf0c5199b2eb12b9b8e95281a ]
vm_dev has a separate lifecycle because it has a 'struct device'
embedded. Thus, having a release callback for it is correct.
Allocating the vm_dev struct with devres totally breaks this protection,
though. Instead of waiting for the vm_dev release callback, the memory
is freed when the platform_device is removed. Resulting in a
use-after-free when finally the callback is to be called.
To easily see the problem, compile the kernel with
CONFIG_DEBUG_KOBJECT_RELEASE and unbind with sysfs.
The fix is easy, don't use devres in this case.
Found during my research about object lifetime problems.
Fixes: 7eb781b1bb ("virtio_mmio: add cleanup for virtio_mmio_probe")
Signed-off-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
Message-Id: <20230629120526.7184-1-wsa+renesas@sang-engineering.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0657b20c5a76c938612f8409735a8830d257866e ]
If a task creates a new block group and that block group becomes unused
before we finish its creation, at btrfs_create_pending_block_groups(),
then when btrfs_mark_bg_unused() is called against the block group, we
assume that the block group is currently in the list of block groups to
reclaim, and we move it out of the list of new block groups and into the
list of unused block groups. This has two consequences:
1) We move it out of the list of new block groups associated to the
current transaction. So the block group creation is not finished and
if we attempt to delete the bg because it's unused, we will not find
the block group item in the extent tree (or the new block group tree),
its device extent items in the device tree etc, resulting in the
deletion to fail due to the missing items;
2) We don't increment the reference count on the block group when we
move it to the list of unused block groups, because we assumed the
block group was on the list of block groups to reclaim, and in that
case it already has the correct reference count. However the block
group was on the list of new block groups, in which case no extra
reference was taken because it's local to the current task. This
later results in doing an extra reference count decrement when
removing the block group from the unused list, eventually leading the
reference count to 0.
This second case was caught when running generic/297 from fstests, which
produced the following assertion failure and stack trace:
[589.559] assertion failed: refcount_read(&block_group->refs) == 1, in fs/btrfs/block-group.c:4299
[589.559] ------------[ cut here ]------------
[589.559] kernel BUG at fs/btrfs/block-group.c:4299!
[589.560] invalid opcode: 0000 [#1] PREEMPT SMP PTI
[589.560] CPU: 8 PID: 2819134 Comm: umount Tainted: G W 6.4.0-rc6-btrfs-next-134+ #1
[589.560] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-0-gea1b7a073390-prebuilt.qemu.org 04/01/2014
[589.560] RIP: 0010:btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.561] Code: 68 62 da c0 (...)
[589.561] RSP: 0018:ffffa55a8c3b3d98 EFLAGS: 00010246
[589.561] RAX: 0000000000000058 RBX: ffff8f030d7f2000 RCX: 0000000000000000
[589.562] RDX: 0000000000000000 RSI: ffffffff953f0878 RDI: 00000000ffffffff
[589.562] RBP: ffff8f030d7f2088 R08: 0000000000000000 R09: ffffa55a8c3b3c50
[589.562] R10: 0000000000000001 R11: 0000000000000001 R12: ffff8f05850b4c00
[589.562] R13: ffff8f030d7f2090 R14: ffff8f05850b4cd8 R15: dead000000000100
[589.563] FS: 00007f497fd2e840(0000) GS:ffff8f09dfc00000(0000) knlGS:0000000000000000
[589.563] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[589.563] CR2: 00007f497ff8ec10 CR3: 0000000271472006 CR4: 0000000000370ee0
[589.563] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[589.564] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[589.564] Call Trace:
[589.564] <TASK>
[589.565] ? __die_body+0x1b/0x60
[589.565] ? die+0x39/0x60
[589.565] ? do_trap+0xeb/0x110
[589.565] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.566] ? do_error_trap+0x6a/0x90
[589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.566] ? exc_invalid_op+0x4e/0x70
[589.566] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] ? asm_exc_invalid_op+0x16/0x20
[589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] ? btrfs_free_block_groups+0x449/0x4a0 [btrfs]
[589.567] close_ctree+0x35d/0x560 [btrfs]
[589.568] ? fsnotify_sb_delete+0x13e/0x1d0
[589.568] ? dispose_list+0x3a/0x50
[589.568] ? evict_inodes+0x151/0x1a0
[589.568] generic_shutdown_super+0x73/0x1a0
[589.569] kill_anon_super+0x14/0x30
[589.569] btrfs_kill_super+0x12/0x20 [btrfs]
[589.569] deactivate_locked_super+0x2e/0x70
[589.569] cleanup_mnt+0x104/0x160
[589.570] task_work_run+0x56/0x90
[589.570] exit_to_user_mode_prepare+0x160/0x170
[589.570] syscall_exit_to_user_mode+0x22/0x50
[589.570] ? __x64_sys_umount+0x12/0x20
[589.571] do_syscall_64+0x48/0x90
[589.571] entry_SYSCALL_64_after_hwframe+0x72/0xdc
[589.571] RIP: 0033:0x7f497ff0a567
[589.571] Code: af 98 0e (...)
[589.572] RSP: 002b:00007ffc98347358 EFLAGS: 00000246 ORIG_RAX: 00000000000000a6
[589.572] RAX: 0000000000000000 RBX: 00007f49800b8264 RCX: 00007f497ff0a567
[589.572] RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000557f558abfa0
[589.573] RBP: 0000557f558a6ba0 R08: 0000000000000000 R09: 00007ffc98346100
[589.573] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000
[589.573] R13: 0000557f558abfa0 R14: 0000557f558a6cb0 R15: 0000557f558a6dd0
[589.573] </TASK>
[589.574] Modules linked in: dm_snapshot dm_thin_pool (...)
[589.576] ---[ end trace 0000000000000000 ]---
Fix this by adding a runtime flag to the block group to tell that the
block group is still in the list of new block groups, and therefore it
should not be moved to the list of unused block groups, at
btrfs_mark_bg_unused(), until the flag is cleared, when we finish the
creation of the block group at btrfs_create_pending_block_groups().
Fixes: a9f189716cf1 ("btrfs: move out now unused BG from the reclaim list")
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 961f5b8bf48a463ac5fe5b13143426d79eb41817 ]
In zoned mode the sequential status of zone can be also tracked in the
runtime flags of block group.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 0657b20c5a76 ("btrfs: fix use-after-free of new block group that became unused")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d7764ff58b4b45c39eb03f2c74a819c1a88fa7b ]
We already have flags in block group to track various status bits,
convert needs_free_space as well and reduce size of btrfs_block_group.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: 0657b20c5a76 ("btrfs: fix use-after-free of new block group that became unused")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9f189716cf15913c453299d72f69c51a9b0f86b ]
An unused block group is easy to remove to free up space and should be
reclaimed fast. Such block group can often already be a target of the
reclaim process. As we check list_empty(&bg->bg_list), we keep it in the
reclaim list. That block group is never reclaimed until the file system
is filled e.g. up to 75%.
Instead, we can move unused block group to the unused list and delete it
fast.
Fixes: 18bb8bbf13 ("btrfs: zoned: automatically reclaim zones")
CC: stable@vger.kernel.org # 5.15+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5ae3716cfdcd286268133867f67d0803847acefc ]
Instead of calling aperture_remove_conflicting_devices() to remove the
conflicting devices, just call to aperture_detach_devices() to detach
the device that matches the same PCI BAR / aperture range. Since the
former is just a wrapper of the latter plus a sysfb_disable() call,
and now that's done in this function but only for the primary devices.
This fixes a regression introduced by commit ee7a69aa38 ("fbdev:
Disable sysfb device registration when removing conflicting FBs"),
where we remove the sysfb when loading a driver for an unrelated pci
device, resulting in the user losing their efifb console or similar.
Note that in practice this only is a problem with the nvidia blob,
because that's the only gpu driver people might install which does not
come with an fbdev driver of it's own. For everyone else the real gpu
driver will restore a working console.
Also note that in the referenced bug there's confusion that this same
bug also happens on amdgpu. But that was just another amdgpu specific
regression, which just happened to happen at roughly the same time and
with the same user-observable symptoms. That bug is fixed now, see
https://bugzilla.kernel.org/show_bug.cgi?id=216331#c15
Note that we should not have any such issues on non-pci multi-gpu
issues, because I could only find two such cases:
- SoC with some external panel over spi or similar. These panel
drivers do not use drm_aperture_remove_conflicting_framebuffers(),
so no problem.
- vga+mga, which is a direct console driver and entirely bypasses all
this.
For the above reasons the cc: stable is just notionally, this patch
will need a backport and that's up to nvidia if they care enough.
v2:
- Explain a bit better why other multi-gpu that aren't pci shouldn't
have any issues with making all this fully pci specific.
v3
- polish commit message (Javier)
v4:
- Fix commit message style (i.e., commit 1234 ("..."))
- fix Daniel's S-o-b address
v5:
- add back an S-o-b tag with Daniel's Intel address
Fixes: ee7a69aa38 ("fbdev: Disable sysfb device registration when removing conflicting FBs")
Tested-by: Aaron Plattner <aplattner@nvidia.com>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=216303#c28
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Aaron Plattner <aplattner@nvidia.com>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Helge Deller <deller@gmx.de>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: <stable@vger.kernel.org> # v5.19+ (if someone else does the backport)
Link: https://patchwork.freedesktop.org/patch/msgid/20230406132109.32050-8-tzimmermann@suse.de
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 81d2393485f0990cf6566b0c9e0697c199f68ae5 ]
Generic fbdev drivers use the apertures field in struct fb_info to
control ownership of the framebuffer memory and graphics device. Do
not set the values in hyperv-fb.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Michael Kelley <mikelley@microsoft.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219160516.23436-9-tzimmermann@suse.de
Stable-dep-of: 5ae3716cfdcd ("video/aperture: Only remove sysfb on the default vga pci device")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b321c31c9b7b309dcde5e8854b741c8e6a9a05f0 ]
Xiang reports that VMs occasionally fail to boot on GICv4.1 systems when
running a preemptible kernel, as it is possible that a vCPU is blocked
without requesting a doorbell interrupt.
The issue is that any preemption that occurs between vgic_v4_put() and
schedule() on the block path will mark the vPE as nonresident and *not*
request a doorbell irq. This occurs because when the vcpu thread is
resumed on its way to block, vcpu_load() will make the vPE resident
again. Once the vcpu actually blocks, we don't request a doorbell
anymore, and the vcpu won't be woken up on interrupt delivery.
Fix it by tracking that we're entering WFI, and key the doorbell
request on that flag. This allows us not to make the vPE resident
when going through a preempt/schedule cycle, meaning we don't lose
any state.
Cc: stable@vger.kernel.org
Fixes: 8e01d9a396 ("KVM: arm64: vgic-v4: Move the GICv4 residency flow to be driven by vcpu_load/put")
Reported-by: Xiang Chen <chenxiang66@hisilicon.com>
Suggested-by: Zenghui Yu <yuzenghui@huawei.com>
Tested-by: Xiang Chen <chenxiang66@hisilicon.com>
Co-developed-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Acked-by: Zenghui Yu <yuzenghui@huawei.com>
Link: https://lore.kernel.org/r/20230713070657.3873244-1-maz@kernel.org
Signed-off-by: Oliver Upton <oliver.upton@linux.dev>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdff36a0217aadf5cbc167893ad1c0da869619cb ]
[Why] hdcp are enabled for asics from raven. for old asics
which hdcp are not enabled, hdcp_workqueue are null. some
access to hdcp work queue are not guarded with pointer check.
[How] add hdcp_workqueue pointer check before access workqueue.
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e8fd3eeb5e8711af39b00642da06474e52f4780c ]
[Why]
multiple display hdcp are enabled within event_property_validate,
event_property_update by looping all displays on mst hub. when
one of display on mst hub in unplugged or disabled, hdcp are
disabled for all displays on mst hub within hdcp_reset_display
by looping all displays of mst link. for displays still active,
their encryption status are off. kernel driver will not run hdcp
authentication again. therefore, hdcp are not enabled automatically.
[How]
within is_content_protection_different, check drm_crtc_state changes
of all displays on mst hub, if need, triger hdcp_update_display to
re-run hdcp authentication.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cdff36a0217a ("drm/amd/display: fix access hdcp_workqueue assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 82986fd631fa04bcedaefe11a6b3767601cbe84f ]
[Why]
connector hdcp properties are lost after display is
unplgged from mst hub. connector is destroyed with
dm_dp_mst_connector_destroy. when display is plugged
back, hdcp is not desired and it wouldnt be enabled.
[How]
save hdcp properties into hdcp_work within
amdgpu_dm_atomic_commit_tail. If the same display is
plugged back with same display index, its hdcp
properties will be retrieved from hdcp_work within
dm_dp_mst_get_modes.
Acked-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: hersen wu <hersenxs.wu@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: cdff36a0217a ("drm/amd/display: fix access hdcp_workqueue assert")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ce29c17dc847bf4245e16aad78a7617afa96297 ]
igc_configure_rx_ring() function will be called as part of XDP program
setup. If Rx hardware timestamp is enabled prio to XDP program setup,
this timestamp enablement will be overwritten when buffer size is
written into SRRCTL register.
Thus, this commit read the register value before write to SRRCTL
register. This commit is tested by using xdp_hw_metadata bpf selftest
tool. The tool enables Rx hardware timestamp and then attach XDP program
to igc driver. It will display hardware timestamp of UDP packet with
port number 9092. Below are detail of test steps and results.
Command on DUT:
sudo ./xdp_hw_metadata <interface name>
Command on Link Partner:
echo -n skb | nc -u -q1 <destination IPv4 addr> 9092
Result before this patch:
skb hwtstamp is not found!
Result after this patch:
found skb hwtstamp = 1677800973.642836757
Optionally, read PHC to confirm the values obtained are almost the same:
Command:
sudo ./testptp -d /dev/ptp0 -g
Result:
clock time: 1677800973.913598978 or Fri Mar 3 07:49:33 2023
Fixes: fc9df2a0b5 ("igc: Enable RX via AF_XDP zero-copy")
Cc: <stable@vger.kernel.org> # 5.14+
Signed-off-by: Song Yoong Siang <yoong.siang.song@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Jesper Dangaard Brouer <brouer@redhat.com>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d1f0a9816f5fbc1316355ec1aa4ddfb9b624cca5 ]
In function ‘fortify_memcpy_chk’,
inlined from ‘get_conn_info_complete’ at net/bluetooth/mgmt.c:7281:2:
include/linux/fortify-string.h:592:25: error: call to
‘__read_overflow2_field’ declared with attribute warning: detected read
beyond size of field (2nd parameter); maybe use struct_group()?
[-Werror=attribute-warning]
592 | __read_overflow2_field(q_size_field, size);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
This is due to the wrong member is used for memcpy(). Use correct one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ccb381e1af1ace292153c88eb1fffa5683d16a20 ]
As per the generic KASAN code in mm/kasan, disable KCOV with
KCOV_INSTRUMENT := n in the makefile.
This fixes a ppc64 boot hang when KCOV and KASAN are enabled.
kasan_early_init() gets called before a PACA is initialised, but the
KCOV hook expects a valid PACA.
Suggested-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Benjamin Gray <bgray@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230710044143.146840-1-bgray@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5251605f4d297a0eb5d3b7f39f9dcee9e4d0115a ]
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GZ301V series which uses an SPI connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230706223323.30871-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9abc77fb144fe916fd2f592dc4b8c7bade02e58a ]
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GA402X series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-3-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8cc87c055d28320e5fa5457922f43bc07dec58bd ]
Adds the required quirk to enable the Cirrus amp and correct pins
on the ASUS ROG GV601V series which uses an I2C connected Cirrus amp.
While this works if the related _DSD properties are made available, these
aren't included in the ACPI of these laptops (yet).
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Link: https://lore.kernel.org/r/20230704044619.19343-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f4a08fed450db87fbb5ff5105354158bdbe1a22 ]
The variable codec->regmap is often protected by the lock
codec->regmap_lock when is accessed. However, it is accessed without
holding the lock when is accessed in snd_hdac_regmap_sync():
if (codec->regmap)
In my opinion, this may be a harmful race, because if codec->regmap is
set to NULL right after the condition is checked, a null-pointer
dereference can occur in the called function regcache_sync():
map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.c
To fix this possible null-pointer dereference caused by data race, the
mutex_lock coverage is extended to protect the if statement as well as the
function call to regcache_sync().
[ Note: the lack of the regmap_lock itself is harmless for the current
codec driver implementations, as snd_hdac_regmap_sync() is only for
PM runtime resume that is prohibited during the codec probe.
But the change makes the whole code more consistent, so it's merged
as is -- tiwai ]
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/20230703031016.1184711-1-islituo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73f1c75d5e6bd8ce2a887ef493a66ad1b16ed704 ]
These models use NSIWAY amplifiers for internal speaker, but cannot put
sound outside from these amplifiers. So eapd verbs are needed to initialize
the amplifiers. They can be added during boot to get working sound out
of internal speaker.
Signed-off-by: dengxiang <dengxiang@nfschina.com>
Link: https://lore.kernel.org/r/20230703021751.2945750-1-dengxiang@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97498cd610c0d030a7bd49a7efad974790661162 ]
In a previous commit 2681631c2973 ("fs/ntfs3: Add null pointer check to
attr_load_runs_vcn"), ni can be NULL in attr_load_runs_vcn(), and thus it
should be checked before being used.
However, in the call stack of this commit, mft_ni in mi_read() is
aliased with ni in attr_load_runs_vcn(), and it is also used in
mi_read() at two places:
mi_read()
rw_lock = &mft_ni->file.run_lock -> No check
attr_load_runs_vcn(mft_ni, ...)
ni (namely mft_ni) is checked in the previous commit
attr_load_runs_vcn(..., &mft_ni->file.run) -> No check
Thus, to avoid possible null-pointer dereferences, the related checks
should be added.
These bugs are reported by a static analysis tool implemented by myself,
and they are found by extending a known bug fixed in the previous commit.
Thus, they could be theoretical bugs.
Signed-off-by: Jia-Ju Bai <baijiaju@buaa.edu.cn>
Signed-off-by: Konstantin Komarov <almaz.alexandrovich@paragon-software.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e54154b9f27262efd0cb4f903cc7d5ad1fe9628 ]
fence Decrements the reference count before exiting.
Avoid Race Vulnerabilities for fence use-after-free.
v2 (chk): actually fix the use after free and not just move it.
Signed-off-by: shanzhulig <shanzhulig@gmail.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b0da5c549ae63ba1debd92a350f90773cb4bfe7 ]
When the msgs are corrupted we need to dump them and then it will
be easier to dig what has happened and where the issue is.
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Milind Changire <mchangir@redhat.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa01eba11f0e57c767a5eab5291c7a01407a00be ]
Adding the device ID from the Asus Ally gets the bluetooth working
on the device.
Signed-off-by: Matthew Anderson <ruinairas1992@gmail.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ff256751a2853e1ffaa36958ff933ccc98c6cb5 ]
The netif_rx() function frees the skb so we can't dereference it to
save the skb->len.
Signed-off-by: Zhang Shurong <zhang_shurong@foxmail.com>
Link: https://lore.kernel.org/r/tencent_3B3D24B66ED66A6BB73CC0E63C6A14E45109@qq.com
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f2bfa944080dcbb8eb56259dfd2c07204cbee17e ]
Intel Barlow Ridge discrete USB4 host router has the same limitation as
the previous generations so make sure the USB3 bandwidth limitation
quirk is applied to Barlow Ridge too.
Signed-off-by: Gil Fine <gil.fine@linux.intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f14a210661ce03988ef4ed3c8402037c8e06539 ]
Intel Barlow Ridge is the first USB4 v2 controller from Intel. The
controller exposes standard USB4 PCI class ID in typical configurations,
however there is a way to configure it so that it uses a special class
ID to allow using s different driver than the Windows inbox one. For
this reason add the Barlow Ridge PCI ID to the Linux driver too so that
the driver can attach regardless of the class ID.
Tested-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6fa0a72cbbe45db4ed967a51f9e6f4e3afe61d20 ]
Some fields such as gt_logd_secs of the struct gfs2_tune are accessed
without holding the lock gt_spin in gfs2_show_options():
val = sdp->sd_tune.gt_logd_secs;
if (val != 30)
seq_printf(s, ",commit=%d", val);
And thus can cause data races when gfs2_show_options() and other functions
such as gfs2_reconfigure() are concurrently executed:
spin_lock(>->gt_spin);
gt->gt_logd_secs = newargs->ar_commit;
To fix these possible data races, the lock sdp->sd_tune.gt_spin is
acquired before accessing the fields of gfs2_tune and released after these
accesses.
Further changes by Andreas:
- Don't hold the spin lock over the seq_printf operations.
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 53d061c19dc4cb68409df6dc11c40389c8c42a75 ]
USB PHY DPDM wakeup bit is enabled by default, when USB wakeup
is not required(/sys/.../wakeup is disabled), this bit should be
disabled, otherwise we will have unexpected wakeup if do USB device
connect/disconnect while system sleep.
This bit can be enabled for both host and device mode.
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230517081907.3410465-3-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a070e8e208995a9d638b538ed7abf28bd6ea6f0 ]
Use dedicated imx8ulp usb compatible to remove QoS request
since imx8ulp has no such limitation of imx7ulp: DMA will
not work if system enters idle.
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Signed-off-by: Li Jun <jun.li@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Message-ID: <20230530104007.1294702-2-xu.yang_2@nxp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1402ba08abae5cfa583ff1a40b99c098a0532d41 ]
According to the USB4 retimer guide the correct order is immediately
after sending ENUMERATE_RETIMERS so update the code to follow this.
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3df55cd773e8603b623425cc97b05e542854ad27 ]
If pdev is NULL, then it is still dereferenced.
This fixes this smatch warning:
drivers/media/platform/mediatek/vpu/mtk_vpu.c:570 vpu_load_firmware() warn: address of NULL pointer 'pdev'
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Cc: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3ff12a92bd7072170978b8b41c2fa41b038139a ]
ISOC transfers expect a certain cadence of requests being queued. Not
keeping up with the expected rate of requests results in missed ISOC
transfers (EXDEV). The application layer may or may not produce video
frames to match this expectation, so uvc gadget driver must handle cases
where the application is not queuing up buffers fast enough to fulfill
ISOC requirements.
Currently, uvc gadget driver waits for new video buffer to become available
before queuing up usb requests. With this patch the gadget driver queues up
0 length usb requests whenever there are no video buffers available. The
USB controller's complete callback is used as the limiter for how quickly
the 0 length packets will be queued. Video buffers are still queued as
soon as they become available.
Link: https://lore.kernel.org/CAMHf4WKbi6KBPQztj9FA4kPvESc1fVKrC8G73-cs6tTeQby9=w@mail.gmail.com/
Signed-off-by: Avichal Rakesh <arakesh@google.com>
Link: https://lore.kernel.org/r/20230508231103.1621375-1-arakesh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5990469943c711cb00bfde6338d2add6c6d0bfe ]
When serial console over USB is enabled, gs_console_connect
queues gs_console_work, where it acquires the spinlock and
queues the usb request, and this request goes to gadget layer.
Now consider a situation where gadget layer prints something
to dmesg, this will eventually call gs_console_write() which
requires cons->lock. And this causes spinlock recursion. Avoid
this by excluding usb_ep_queue from the spinlock.
spin_lock_irqsave //needs cons->lock
gs_console_write
.
.
_printk
__warn_printk
dev_warn/pr_err
.
.
[USB Gadget Layer]
.
.
usb_ep_queue
gs_console_work
__gs_console_push // acquires cons->lock
process_one_work
Signed-off-by: Prashanth K <quic_prashk@quicinc.com>
Link: https://lore.kernel.org/r/1683638872-6885-1-git-send-email-quic_prashk@quicinc.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d5b7eb477c286f6ceccbb38704136eea0e6b09ca ]
From the experiments with camera sensors using SGRBG10_1X10/3280x2464 and
SRGGB10_1X10/3280x2464 formats, it becomes clear that on sdm845 and sm8250
VFE outputs the lines padded to a length multiple of 16 bytes. As in the
current driver the value of the bpl_alignment is set to 8 bytes, the frames
captured in formats with the bytes-per-line value being not a multiple of
16 get corrupted.
Set the bpl_alignment of the camss video output device to 16 for sdm845 and
sm8250 to fix that.
Signed-off-by: Andrey Konovalov <andrey.konovalov@linaro.org>
Tested-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Acked-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56b5c3e67b0f9af3f45cf393be048ee8d8a92694 ]
Getting below error when using KCSAN to check the driver. Adding lock to
protect parameter num_rdy when getting the value with function:
v4l2_m2m_num_src_bufs_ready/v4l2_m2m_num_dst_bufs_ready.
kworker/u16:3: [name:report&]BUG: KCSAN: data-race in v4l2_m2m_buf_queue
kworker/u16:3: [name:report&]
kworker/u16:3: [name:report&]read-write to 0xffffff8105f35b94 of 1 bytes by task 20865 on cpu 7:
kworker/u16:3: v4l2_m2m_buf_queue+0xd8/0x10c
Signed-off-by: Pina Chen <pina.chen@mediatek.com>
Signed-off-by: Yunfei Dong <yunfei.dong@mediatek.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8f38f8fa7261819eb7d4fb369dc3bfab72259033 ]
Ensure child node references are decremented properly in the error path.
Signed-off-by: Lu Hongfei <luhongfei@vivo.com>
Link: https://lore.kernel.org/r/20230525111705.3055-1-luhongfei@vivo.com
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6bd6cd29c92401a101993290051fa55078238a52 ]
Returning early from stm32_usart_serial_remove() results in a resource
leak as several cleanup functions are not called. The driver core ignores
the return value and there is no possibility to clean up later.
uart_remove_one_port() only returns non-zero if there is some
inconsistency (i.e. stm32_usart_driver.state[port->line].uart_port == NULL).
This should never happen, and even if it does it's a bad idea to exit
early in the remove callback without cleaning up.
This prepares changing the prototype of struct platform_driver::remove to
return void. See commit 5c5a7680e67b ("platform: Provide a remove callback
that returns no value") for further details about this quest.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20230512173810.131447-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99f280700b4cc02d5f141b8d15f8e9fad0418f65 ]
Don't collect exiting session in smb2_reconnect_server(), because it
will be released soon.
Note that the exiting session will stay in server->smb_ses_list until
it complete the cifs_free_ipc() and logoff() and then delete itself
from the list.
Signed-off-by: Winston Wen <wentao@uniontech.com>
Reviewed-by: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12c30f33cc6769bf411088a2872843c4f9ea32f9 ]
This fixes the following warning reported by kernel test robot
fs/smb/client/cifsfs.c:982 cifs_smb3_do_mount() warn: possible
memory leak of 'cifs_sb'
Link: https://lore.kernel.org/all/202306170124.CtQqzf0I-lkp@intel.com/
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 724418b84e6248cd27599607b7e5fac365b8e3f5 ]
This requires a patched ACPI table or a firmware from ASUS to work because
the system does not come with the _DSD field for the CSC3551.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217550
Signed-off-by: Matthew Anderson <ruinairas1992@gmail.com>
Tested-by: Philip Mueller <philm@manjaro.org>
Link: https://lore.kernel.org/r/20230621161714.9442-1-ruinairas1992@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d389dcb3a48cec4f03c16434c0bf98a4c635372a ]
The shutdown is called on reboot/shutdown of the machine.
At this point the firmware tracing cannot be used anymore but in case of
IPC3 it is using and keeping a DMA channel active (dtrace).
For Tiger Lake platforms we have a quirk in place to fix rare reboot issues
when a DMA was active before rebooting the system.
If the tracing is enabled this quirk will be always used and a print
appears on the kernel log which might be misleading or not even correct.
Release the fw tracing before executing the shutdown to make sure that this
known DMA user is cleared away.
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Daniel Baluta <daniel.baluta@nxp.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230616100039.378150-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
