commit 5f641174a12b8a876a4101201a21ef4675ecc014 upstream.
The `nocrt` module parameter has no code associated with it and does
nothing. As `crt=-1` has same functionality as what nocrt should be
doing drop `nocrt` and associated documentation.
This should fix a quirk for Gigabyte GA-7ZX that used `nocrt` and
thus didn't function properly.
Fixes: 8c99fdce30 ("ACPI: thermal: set "thermal.nocrt" via DMI on Gigabyte GA-7ZX")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fd0a7ec379dbf21b7bfd81914381ae5281706ef5 upstream.
The vangogh driver just gained a link time dependency that now causes
randconfig builds to fail:
x86_64-linux-ld: sound/soc/amd/vangogh/pci-acp5x.o: in function `snd_acp5x_probe':
pci-acp5x.c:(.text+0xbb): undefined reference to `snd_amd_acp_find_config'
Fixes: e89f45edb747e ("ASoC: amd: vangogh: Add check for acp config flags in vangogh platform")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230605085839.2157268-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit cfeb6ae8bcb96ccf674724f223661bbcef7b0d0b ]
The current implementation of append may cause duplicate data and/or
incorrect ranges to be returned to a reader during an update. Although
this has not been reported or seen, disable the append write operation
while the tree is in rcu mode out of an abundance of caution.
During the analysis of the mas_next_slot() the following was
artificially created by separating the writer and reader code:
Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last slot write is to start of slot
store current contents in slot
overwrite old end pivot
mas_next_slot():
read end metadata
read old end pivot
return with incorrect range
store new value
Alternatively:
Writer: reader:
mas_wr_append
set end pivot
updates end metata
Detects write to last slot
last lost write to end of slot
store value
mas_next_slot():
read end metadata
read old end pivot
read new end pivot
return with incorrect range
set old end pivot
There may be other accesses that are not safe since we are now updating
both metadata and pointers, so disabling append if there could be rcu
readers is the safest action.
Link: https://lkml.kernel.org/r/20230819004356.1454718-2-Liam.Howlett@oracle.com
Fixes: 54a611b605 ("Maple Tree: add new data structure")
Signed-off-by: Liam R. Howlett <Liam.Howlett@oracle.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e39c1ac688161b4db3617aabbca589b395242bc ]
Associate the swnode of the GPIO device's (which is the interrupt
controller here) with the irq domain. Otherwise the interrupt-controller
device attribute is a no-op.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab4109f91b328ff5cb5e1279f64d443241add2d1 ]
If a GPIO simulator device is unbound with interrupts still requested,
we will hit a use-after-free issue in __irq_domain_deactivate_irq(). The
owner of the irq domain must dispose of all mappings before destroying
the domain object.
Fixes: cb8c474e79 ("gpio: sim: new testing module")
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e531fdb5cd5ee2564b7fe10c8a9219e2b2fac61e ]
If a signal callback releases the sw_sync fence, that will trigger a
deadlock as the timeline_fence_release recurses onto the fence->lock
(used both for signaling and the the timeline tree).
To avoid that, temporarily hold an extra reference to the signalled
fences until after we drop the lock.
(This is an alternative implementation of https://patchwork.kernel.org/patch/11664717/
which avoids some potential UAF issues with the original patch.)
v2: Remove now obsolete comment, use list_move_tail() and
list_del_init()
Reported-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Fixes: d3c6dd1fb3 ("dma-buf/sw_sync: Synchronize signal vs syncpt free")
Signed-off-by: Rob Clark <robdclark@chromium.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230818145939.39697-1-robdclark@gmail.com
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8fcc1c40b747069644db6102c1d84c942c9d4d86 ]
The pinctrl group and function creation/remove calls expect
caller to take care of locking. Add lock around these functions.
Fixes: b59d0e7827 ("pinctrl: Add RZ/A2 pin and gpio controller")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-4-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f982b9d57e7f834138fc908804fe66f646f2b108 ]
Fix the below random NULL pointer crash during boot by serializing
pinctrl group and function creation/remove calls in
rzv2m_dt_subnode_to_map() with mutex lock.
Crash logs:
pc : __pi_strcmp+0x20/0x140
lr : pinmux_func_name_to_selector+0x68/0xa4
Call trace:
__pi_strcmp+0x20/0x140
pinmux_generic_add_function+0x34/0xcc
rzv2m_dt_subnode_to_map+0x2e4/0x418
rzv2m_dt_node_to_map+0x15c/0x18c
pinctrl_dt_to_map+0x218/0x37c
create_pinctrl+0x70/0x3d8
While at it, add a comment for lock.
Fixes: 92a9b82525 ("pinctrl: renesas: Add RZ/V2M pin and gpio controller driver")
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-3-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 661efa2284bbc2338da0424e219603f034072c74 ]
Fix the below random NULL pointer crash during boot by serializing
pinctrl group and function creation/remove calls in
rzg2l_dt_subnode_to_map() with mutex lock.
Crash log:
pc : __pi_strcmp+0x20/0x140
lr : pinmux_func_name_to_selector+0x68/0xa4
Call trace:
__pi_strcmp+0x20/0x140
pinmux_generic_add_function+0x34/0xcc
rzg2l_dt_subnode_to_map+0x314/0x44c
rzg2l_dt_node_to_map+0x164/0x194
pinctrl_dt_to_map+0x218/0x37c
create_pinctrl+0x70/0x3d8
While at it, add comments for bitmap_lock and lock.
Fixes: c4c4637eb5 ("pinctrl: renesas: Add RZ/G2L pin and gpio controller driver")
Tested-by: Chris Paterson <Chris.Paterson2@renesas.com>
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230815131558.33787-2-biju.das.jz@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2746f13f6f1df7999001d6595b16f789ecc28ad1 ]
The COMMON_CLK config is not enabled in some of the architectures.
This causes below build issues:
pwm-rz-mtu3.c:(.text+0x114):
undefined reference to `clk_rate_exclusive_put'
pwm-rz-mtu3.c:(.text+0x32c):
undefined reference to `clk_rate_exclusive_get'
Fix these issues by moving clk_rate_exclusive_{get,put} inside COMMON_CLK
code block, as clk.c is enabled by COMMON_CLK.
Fixes: 55e9b8b7b8 ("clk: add clk_rate_exclusive api")
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/all/202307251752.vLfmmhYm-lkp@intel.com/
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Link: https://lore.kernel.org/r/20230725175140.361479-1-biju.das.jz@bp.renesas.com
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 60c5fd2e8f3c42a5abc565ba9876ead1da5ad2b7 upstream.
The raid_component_add() function was added to the kernel tree via patch
"[SCSI] embryonic RAID class" (2005). Remove this function since it never
has had any callers in the Linux kernel. And also raid_component_release()
is only used in raid_component_add(), so it is also removed.
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230822015254.184270-1-wangzhu9@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Fixes: 04b5b5cb0136 ("scsi: core: Fix possible memory leak if device_add() fails")
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bd3a76880b2bce017987cf53780b372cf59528e upstream.
Commit 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add()
fails") fixed the memory leak caused by dev_set_name() when device_add()
failed. However, it did not consider that 'tgt' has already been released
when put_device(&tgt->dev) is called. Remove kfree(tgt) in the error path
to avoid double free of 'tgt' and move put_device(&tgt->dev) after the
removed kfree(tgt) to avoid a use-after-free.
Fixes: 41320b18a0e0 ("scsi: snic: Fix possible memory leak if device_add() fails")
Signed-off-by: Zhu Wang <wangzhu9@huawei.com>
Link: https://lore.kernel.org/r/20230819083941.164365-1-wangzhu9@huawei.com
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0e0e9bd5f7b9d40fd03b70092367247d52da1db0 upstream.
Commit 98b211d641 ("madvise: convert madvise_free_pte_range() to use a
folio") replaced the page_mapcount() with folio_mapcount() to check
whether the folio is shared by other mapping.
It's not correct for large folios. folio_mapcount() returns the total
mapcount of large folio which is not suitable to detect whether the folio
is shared.
Use folio_estimated_sharers() which returns a estimated number of shares.
That means it's not 100% correct. It should be OK for madvise case here.
User-visible effects is that the THP is skipped when user call madvise.
But the correct behavior is THP should be split and processed then.
NOTE: this change is a temporary fix to reduce the user-visible effects
before the long term fix from David is ready.
Link: https://lkml.kernel.org/r/20230808020917.2230692-4-fengwei.yin@intel.com
Fixes: 98b211d641 ("madvise: convert madvise_free_pte_range() to use a folio")
Signed-off-by: Yin Fengwei <fengwei.yin@intel.com>
Reviewed-by: Yu Zhao <yuzhao@google.com>
Reviewed-by: Ryan Roberts <ryan.roberts@arm.com>
Cc: David Hildenbrand <david@redhat.com>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Minchan Kim <minchan@kernel.org>
Cc: Vishal Moola (Oracle) <vishal.moola@gmail.com>
Cc: Yang Shi <shy828301@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c275a176e4b69868576e543409927ae75e3a3288 upstream.
Commit ee8b94c8510c ("can: raw: fix receiver memory leak") introduced
a new reference to the CAN netdevice that has assigned CAN filters.
But this new ro->dev reference did not maintain its own refcount which
lead to another KASAN use-after-free splat found by Eric Dumazet.
This patch ensures a proper refcount for the CAN nedevice.
Fixes: ee8b94c8510c ("can: raw: fix receiver memory leak")
Reported-by: Eric Dumazet <edumazet@google.com>
Cc: Ziyang Xuan <william.xuanziyang@huawei.com>
Signed-off-by: Oliver Hartkopp <socketcan@hartkopp.net>
Link: https://lore.kernel.org/r/20230821144547.6658-3-socketcan@hartkopp.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c7c4bc986932218fd0df9d2a100509772028fb1 upstream.
sizeof(struct ublksrv_io_cmd) is 16bytes, which can be held in 64byte SQE,
so not necessary to check IO_URING_F_SQE128.
With this change, we get chance to save half SQ ring memory.
Fixed: 71f28f3136 ("ublk_drv: add io_uring based userspace block driver")
Signed-off-by: Ming Lei <ming.lei@redhat.com>
Link: https://lore.kernel.org/r/20230220041413.1524335-1-ming.lei@redhat.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 583893a66d731f5da010a3fa38a0460e05f0149b upstream.
Previously, on unplug events, the TMU mode was disabled first
followed by the Time Synchronization Handshake, irrespective of
whether the tb_switch_tmu_rate_write() API was successful or not.
However, this caused a problem with Thunderbolt 3 (TBT3)
devices, as the TSPacketInterval bits were always enabled by default,
leading the host router to assume that the device router's TMU was
already enabled and preventing it from initiating the Time
Synchronization Handshake. As a result, TBT3 monitors experienced
display flickering from the second hot plug onwards.
To address this issue, we have modified the code to only disable the
Time Synchronization Handshake during TMU disable if the
tb_switch_tmu_rate_write() function is successful. This ensures that
the TBT3 devices function correctly and eliminates the display
flickering issue.
Co-developed-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanath S <Sanath.S@amd.com>
Signed-off-by: Sanjay R Mehta <sanju.mehta@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Mika Westerberg <mika.westerberg@linux.intel.com>
[ USB4v2 introduced support for uni-directional TMU mode as part of
d49b4f043d63 ("thunderbolt: Add support for enhanced uni-directional TMU mode")
This is not a stable candidate commit, so adjust the code for backport. ]
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ef269ef1ac006acf974793d975539244d77b28f upstream.
cpuset_can_attach() can fail. Postpone DL BW allocation until all tasks
have been checked. DL BW is not allocated per-task but as a sum over
all DL tasks migrating.
If multiple controllers are attached to the cgroup next to the cpuset
controller a non-cpuset can_attach() can fail. In this case free DL BW
in cpuset_cancel_attach().
Finally, update cpuset DL task count (nr_deadline_tasks) only in
cpuset_attach().
Suggested-by: Waiman Long <longman@redhat.com>
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 85989106feb734437e2d598b639991b9185a43a6 upstream.
While moving a set of tasks between exclusive cpusets,
cpuset_can_attach() -> task_can_attach() calls dl_cpu_busy(..., p) for
DL BW overflow checking and per-task DL BW allocation on the destination
root_domain for the DL tasks in this set.
This approach has the issue of not freeing already allocated DL BW in
the following error cases:
(1) The set of tasks includes multiple DL tasks and DL BW overflow
checking fails for one of the subsequent DL tasks.
(2) Another controller next to the cpuset controller which is attached
to the same cgroup fails in its can_attach().
To address this problem rework dl_cpu_busy():
(1) Split it into dl_bw_check_overflow() & dl_bw_alloc() and add a
dedicated dl_bw_free().
(2) dl_bw_alloc() & dl_bw_free() take a `u64 dl_bw` parameter instead of
a `struct task_struct *p` used in dl_cpu_busy(). This allows to
allocate DL BW for a set of tasks too rather than only for a single
task.
Signed-off-by: Dietmar Eggemann <dietmar.eggemann@arm.com>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c0f78fd5edcf29b2822ac165f9248a6c165e8554 upstream.
update_tasks_root_domain currently iterates over all tasks even if no
DEADLINE task is present on the cpuset/root domain for which bandwidth
accounting is being rebuilt. This has been reported to introduce 10+ ms
delays on suspend-resume operations.
Skip the costly iteration for cpusets that don't contain DEADLINE tasks.
Reported-by: Qais Yousef (Google) <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6c24849f5515e4966d94fa5279bdff4acf2e9489 upstream.
Qais reported that iterating over all tasks when rebuilding root domains
for finding out which ones are DEADLINE and need their bandwidth
correctly restored on such root domains can be a costly operation (10+
ms delays on suspend-resume).
To fix the problem keep track of the number of DEADLINE tasks belonging
to each cpuset and then use this information (followup patch) to only
perform the above iteration if DEADLINE tasks are actually present in
the cpuset for which a corresponding root domain is being rebuilt.
Reported-by: Qais Yousef (Google) <qyousef@layalina.io>
Link: https://lore.kernel.org/lkml/20230206221428.2125324-1-qyousef@layalina.io/
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 111cd11bbc54850f24191c52ff217da88a5e639b upstream.
Turns out percpu_cpuset_rwsem - commit 1243dc518c ("cgroup/cpuset:
Convert cpuset_mutex to percpu_rwsem") - wasn't such a brilliant idea,
as it has been reported to cause slowdowns in workloads that need to
change cpuset configuration frequently and it is also not implementing
priority inheritance (which causes troubles with realtime workloads).
Convert percpu_cpuset_rwsem back to regular cpuset_mutex. Also grab it
only for SCHED_DEADLINE tasks (other policies don't care about stable
cpusets anyway).
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
[ Conflict in kernel/cgroup/cpuset.c due to pulling new code/comments.
Reject all new code. Remove BUG_ON() about rwsem that doesn't exist on
mainline. ]
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad3a557daf6915296a43ef97a3e9c48e076c9dd8 upstream.
rebuild_root_domains() and update_tasks_root_domain() have neutral
names, but actually deal with DEADLINE bandwidth accounting.
Rename them to use 'dl_' prefix so that intent is more clear.
No functional change.
Suggested-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Juri Lelli <juri.lelli@redhat.com>
Reviewed-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Qais Yousef (Google) <qyousef@layalina.io>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2d8ae8c417db284f598dffb178cc01e7db0f1821 upstream.
We've aligned setgid behavior over multiple kernel releases. The details
can be found in commit cf619f891971 ("Merge tag 'fs.ovl.setgid.v6.2' of
git://git.kernel.org/pub/scm/linux/kernel/git/vfs/idmapping") and
commit 426b4ca2d6 ("Merge tag 'fs.setgid.v6.0' of
git://git.kernel.org/pub/scm/linux/kernel/git/brauner/linux").
Consistent setgid stripping behavior is now encapsulated in the
setattr_should_drop_sgid() helper which is used by all filesystems that
strip setgid bits outside of vfs proper. Usually ATTR_KILL_SGID is
raised in e.g., chown_common() and is subject to the
setattr_should_drop_sgid() check to determine whether the setgid bit can
be retained. Since nfsd is raising ATTR_KILL_SGID unconditionally it
will cause notify_change() to strip it even if the caller had the
necessary privileges to retain it. Ensure that nfsd only raises
ATR_KILL_SGID if the caller lacks the necessary privileges to retain the
setgid bit.
Without this patch the setgid stripping tests in LTP will fail:
> As you can see, the problem is S_ISGID (0002000) was dropped on a
> non-group-executable file while chown was invoked by super-user, while
[...]
> fchown02.c:66: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700
[...]
> chown02.c:57: TFAIL: testfile2: wrong mode permissions 0100700, expected 0102700
With this patch all tests pass.
Reported-by: Sherry Yang <sherry.yang@oracle.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
[Harshit: backport to 6.1.y:
Use init_user_ns instead of nop_mnt_idmap as we don't have
commit abf08576afe3 ("fs: port vfs_*() helpers to struct mnt_idmap")]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4f704d9a8352f5c0a8fcdb6213b934630342bd44 upstream.
We've aligned setgid behavior over multiple kernel releases. The details
can be found in the following two merge messages:
cf619f891971 ("Merge tag 'fs.ovl.setgid.v6.2')
426b4ca2d6 ("Merge tag 'fs.setgid.v6.0')
Consistent setgid stripping behavior is now encapsulated in the
setattr_should_drop_sgid() helper which is used by all filesystems that
strip setgid bits outside of vfs proper. Switch nfs to rely on this
helper as well. Without this patch the setgid stripping tests in
xfstests will fail.
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Message-Id: <20230313-fs-nfs-setgid-v2-1-9a59f436cfc0@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
[ Harshit: backport to 6.1.y:
fs/internal.h -- minor conflict due to code change differences.
include/linux/fs.h -- Used struct user_namespace *mnt_userns
instead of struct mnt_idmap *idmap
fs/nfs/inode.c -- Used init_user_ns instead of nop_mnt_idmap ]
Signed-off-by: Harshit Mogalapalli <harshit.m.mogalapalli@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3c107f36db061603bee7564fbd6388b1f1879fd3 upstream.
There are some issues with the bpf/nat6to4.c building.
1. It use TEST_CUSTOM_PROGS, which will add the nat6to4.o to
kselftest-list file and run by common run_tests.
2. When building the test via `make -C tools/testing/selftests/
TARGETS="net"`, the nat6to4.o will be build in selftests/net/bpf/
folder. But in test udpgro_frglist.sh it refers to ../bpf/nat6to4.o.
The correct path should be ./bpf/nat6to4.o.
3. If building the test via `make -C tools/testing/selftests/ TARGETS="net"
install`. The nat6to4.o will be installed to kselftest_install/net/
folder. Then the udpgro_frglist.sh should refer to ./nat6to4.o.
To fix the confusing test path, let's just move the nat6to4.c to net folder
and build it as TEST_GEN_FILES.
Fixes: edae34a3ed ("selftests net: add UDP GRO fraglist + bpf self-tests")
Tested-by: Björn Töpel <bjorn@kernel.org>
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://lore.kernel.org/r/20230118020927.3971864-1-liuhangbin@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Hardik Garg <hargar@linux.microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56b930dcd88c2adc261410501c402c790980bdb5 upstream.
Add a 200ms delay after sending a ctrl report to Quadro,
Octo, D5 Next and Aquaero to give them enough time to
process the request and save the data to memory. Otherwise,
under heavier userspace loads where multiple sysfs entries
are usually set in quick succession, a new ctrl report could
be requested from the device while it's still processing the
previous one and fail with -EPIPE. The delay is only applied
if two ctrl report operations are near each other in time.
Reported by a user on Github [1] and tested by both of us.
[1] https://github.com/aleksamagicka/aquacomputer_d5next-hwmon/issues/82
Fixes: 752b927951 ("hwmon: (aquacomputer_d5next) Add support for Aquacomputer Octo")
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Link: https://lore.kernel.org/r/20230807172004.456968-1-savicaleksa83@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
[ removed Aquaero support as it's not in 6.1 ]
Signed-off-by: Aleksa Savic <savicaleksa83@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c66ca3949dc701da7f4c9407f2140ae425683a5 upstream.
0-Day found a 34.6% regression in stress-ng's 'af-alg' test case, and
bisected it to commit b81fac906a8f ("x86/fpu: Move FPU initialization into
arch_cpu_finalize_init()"), which optimizes the FPU init order, and moves
the CR4_OSXSAVE enabling into a later place:
arch_cpu_finalize_init
identify_boot_cpu
identify_cpu
generic_identify
get_cpu_cap --> setup cpu capability
...
fpu__init_cpu
fpu__init_cpu_xstate
cr4_set_bits(X86_CR4_OSXSAVE);
As the FPU is not yet initialized the CPU capability setup fails to set
X86_FEATURE_OSXSAVE. Many security module like 'camellia_aesni_avx_x86_64'
depend on this feature and therefore fail to load, causing the regression.
Cure this by setting X86_FEATURE_OSXSAVE feature right after OSXSAVE
enabling.
[ tglx: Moved it into the actual BSP FPU initialization code and added a comment ]
Fixes: b81fac906a8f ("x86/fpu: Move FPU initialization into arch_cpu_finalize_init()")
Reported-by: kernel test robot <oliver.sang@intel.com>
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/lkml/202307192135.203ac24e-oliver.sang@intel.com
Link: https://lore.kernel.org/lkml/20230823065747.92257-1-feng.tang@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f69383b203e28cf8a4ca9570e572da1699f76cd upstream.
The thread flag TIF_NEED_FPU_LOAD indicates that the FPU saved state is
valid and should be reloaded when returning to userspace. However, the
kernel will skip doing this if the FPU registers are already valid as
determined by fpregs_state_valid(). The logic embedded there considers
the state valid if two cases are both true:
1: fpu_fpregs_owner_ctx points to the current tasks FPU state
2: the last CPU the registers were live in was the current CPU.
This is usually correct logic. A CPU’s fpu_fpregs_owner_ctx is set to
the current FPU during the fpregs_restore_userregs() operation, so it
indicates that the registers have been restored on this CPU. But this
alone doesn’t preclude that the task hasn’t been rescheduled to a
different CPU, where the registers were modified, and then back to the
current CPU. To verify that this was not the case the logic relies on the
second condition. So the assumption is that if the registers have been
restored, AND they haven’t had the chance to be modified (by being
loaded on another CPU), then they MUST be valid on the current CPU.
Besides the lazy FPU optimizations, the other cases where the FPU
registers might not be valid are when the kernel modifies the FPU register
state or the FPU saved buffer. In this case the operation modifying the
FPU state needs to let the kernel know the correspondence has been
broken. The comment in “arch/x86/kernel/fpu/context.h” has:
/*
...
* If the FPU register state is valid, the kernel can skip restoring the
* FPU state from memory.
*
* Any code that clobbers the FPU registers or updates the in-memory
* FPU state for a task MUST let the rest of the kernel know that the
* FPU registers are no longer valid for this task.
*
* Either one of these invalidation functions is enough. Invalidate
* a resource you control: CPU if using the CPU for something else
* (with preemption disabled), FPU for the current task, or a task that
* is prevented from running by the current task.
*/
However, this is not completely true. When the kernel modifies the
registers or saved FPU state, it can only rely on
__fpu_invalidate_fpregs_state(), which wipes the FPU’s last_cpu
tracking. The exec path instead relies on fpregs_deactivate(), which sets
the CPU’s FPU context to NULL. This was observed to fail to restore the
reset FPU state to the registers when returning to userspace in the
following scenario:
1. A task is executing in userspace on CPU0
- CPU0’s FPU context points to tasks
- fpu->last_cpu=CPU0
2. The task exec()’s
3. While in the kernel the task is preempted
- CPU0 gets a thread executing in the kernel (such that no other
FPU context is activated)
- Scheduler sets task’s fpu->last_cpu=CPU0 when scheduling out
4. Task is migrated to CPU1
5. Continuing the exec(), the task gets to
fpu_flush_thread()->fpu_reset_fpregs()
- Sets CPU1’s fpu context to NULL
- Copies the init state to the task’s FPU buffer
- Sets TIF_NEED_FPU_LOAD on the task
6. The task reschedules back to CPU0 before completing the exec() and
returning to userspace
- During the reschedule, scheduler finds TIF_NEED_FPU_LOAD is set
- Skips saving the registers and updating task’s fpu→last_cpu,
because TIF_NEED_FPU_LOAD is the canonical source.
7. Now CPU0’s FPU context is still pointing to the task’s, and
fpu->last_cpu is still CPU0. So fpregs_state_valid() returns true even
though the reset FPU state has not been restored.
So the root cause is that exec() is doing the wrong kind of invalidate. It
should reset fpu->last_cpu via __fpu_invalidate_fpregs_state(). Further,
fpu__drop() doesn't really seem appropriate as the task (and FPU) are not
going away, they are just getting reset as part of an exec. So switch to
__fpu_invalidate_fpregs_state().
Also, delete the misleading comment that says that either kind of
invalidate will be enough, because it’s not always the case.
Fixes: 33344368cb ("x86/fpu: Clean up the fpu__clear() variants")
Reported-by: Lei Wang <lei4.wang@intel.com>
Signed-off-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Lijun Pan <lijun.pan@intel.com>
Reviewed-by: Sohil Mehta <sohil.mehta@intel.com>
Acked-by: Lijun Pan <lijun.pan@intel.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230818170305.502891-1-rick.p.edgecombe@intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2872144aec04baa7e43ecd2a60f7f0be3aa843fd upstream.
System wide suspend already has support for lmem save/restore during
suspend therefore enabling d3cold for s2idle and keepng it disable for
runtime PM.(Refer below commit for d3cold runtime PM disable justification)
'commit 66eb93e71a7a ("drm/i915/dgfx: Keep PCI autosuspend control
'on' by default on all dGPU")'
It will reduce the DG2 Card power consumption to ~0 Watt
for s2idle power KPI.
v2:
- Added "Cc: stable@vger.kernel.org".
Closes: https://gitlab.freedesktop.org/drm/intel/-/issues/8755
Cc: stable@vger.kernel.org
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Anshuman Gupta <anshuman.gupta@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Aaron Ma <aaron.ma@canonical.com>
Tested-by: Jianshui Yu <Jianshui.yu@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230816125216.1722002-1-anshuman.gupta@intel.com
(cherry picked from commit 2643e6d1f2a5e51877be24042d53cf956589be10)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cc22522fd55e257c86d340ae9aedc122e705a435 upstream.
40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
changed acpiphp hotplug to use pci_assign_unassigned_bridge_resources()
which depends on bridge being available, however enable_slot() can be
called without bridge associated:
1. Legitimate case of hotplug on root bus (widely used in virt world)
2. A (misbehaving) firmware, that sends ACPI Bus Check notifications to
non existing root ports (Dell Inspiron 7352/0W6WV0), which end up at
enable_slot(..., bridge = 0) where bus has no bridge assigned to it.
acpihp doesn't know that it's a bridge, and bus specific 'PCI
subsystem' can't augment ACPI context with bridge information since
the PCI device to get this data from is/was not available.
Issue is easy to reproduce with QEMU's 'pc' machine, which supports PCI
hotplug on hostbridge slots. To reproduce, boot kernel at commit
40613da52b13 in VM started with following CLI (assuming guest root fs is
installed on sda1 partition):
# qemu-system-x86_64 -M pc -m 1G -enable-kvm -cpu host \
-monitor stdio -serial file:serial.log \
-kernel arch/x86/boot/bzImage \
-append "root=/dev/sda1 console=ttyS0" \
guest_disk.img
Once guest OS is fully booted at qemu prompt:
(qemu) device_add e1000
(check serial.log) it will cause NULL pointer dereference at:
void pci_assign_unassigned_bridge_resources(struct pci_dev *bridge)
{
struct pci_bus *parent = bridge->subordinate;
BUG: kernel NULL pointer dereference, address: 0000000000000018
? pci_assign_unassigned_bridge_resources+0x1f/0x260
enable_slot+0x21f/0x3e0
acpiphp_hotplug_notify+0x13d/0x260
acpi_device_hotplug+0xbc/0x540
acpi_hotplug_work_fn+0x15/0x20
process_one_work+0x1f7/0x370
worker_thread+0x45/0x3b0
The issue was discovered on Dell Inspiron 7352/0W6WV0 laptop with following
sequence:
1. Suspend to RAM
2. Wake up with the same backtrace being observed:
3. 2nd suspend to RAM attempt makes laptop freeze
Fix it by using __pci_bus_assign_resources() instead of
pci_assign_unassigned_bridge_resources() as we used to do, but only in case
when bus doesn't have a bridge associated (to cover for the case of ACPI
event on hostbridge or non existing root port).
That lets us keep hotplug on root bus working like it used to and at the
same time keeps resource reassignment usable on root ports (and other 1st
level bridges) that was fixed by 40613da52b13.
Fixes: 40613da52b13 ("PCI: acpiphp: Reassign resources on bridge if necessary")
Link: https://lore.kernel.org/r/20230726123518.2361181-2-imammedo@redhat.com
Reported-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Woody Suwalski <terraluna977@gmail.com>
Tested-by: Michal Koutný <mkoutny@suse.com>
Link: https://lore.kernel.org/r/11fc981c-af49-ce64-6b43-3e282728bd1a@gmail.com
Signed-off-by: Igor Mammedov <imammedo@redhat.com>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Acked-by: Rafael J. Wysocki <rafael@kernel.org>
Acked-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7f2e65699e2290fd547ec12a17008764e5d9620 upstream.
variable *nplanes is provided by user via system call argument. The
possible value of q_data->fmt->num_planes is 1-3, while the value
of *nplanes can be 1-8. The array access by index i can cause array
out-of-bounds.
Fix this bug by checking *nplanes against the array size.
Fixes: 4e855a6efa ("[media] vcodec: mediatek: Add Mediatek V4L2 Video Encoder Driver")
Signed-off-by: Wei Chen <harperchen1110@gmail.com>
Cc: stable@vger.kernel.org
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6bc3462a0f5ecaa376a0b3d76dafc55796799e17 upstream.
Shubhra reports that their laptop is heating up over s2idle. Even though
it's getting into the deepest state, it appears to be having spurious
wakeup events.
While debugging a tangential issue with the RTC Carsten reports that recent
6.1.y based kernel face a similar problem.
Looking at acpidump and GPIO register comparisons these spurious wakeup
events are from the GPIO associated with the I2C touchpad on both laptops
and occur even when the touchpad is not marked as a wake source by the
kernel.
This means that the boot firmware has programmed these bits and because
Linux didn't touch them lead to spurious wakeup events from that GPIO.
To fix this issue, restore most of the code that previously would clear all
the bits associated with wakeup sources. This will allow the kernel to only
program the wake up sources that are necessary.
This is similar to what was done previously; but only the wake bits are
cleared by default instead of interrupts and wake bits. If any other
problems are reported then it may make sense to clear interrupts again too.
Cc: Sachi King <nakato@nakato.io>
Cc: stable@vger.kernel.org
Cc: Thorsten Leemhuis <regressions@leemhuis.info>
Fixes: 65f6c7c91cb2 ("pinctrl: amd: Revert "pinctrl: amd: disable and mask interrupts on probe"")
Reported-by: Shubhra Prakash Nandi <email2shubhra@gmail.com>
Closes: https://bugzilla.kernel.org/show_bug.cgi?id=217754
Reported-by: Carsten Hatger <xmb8dsv4@gmail.com>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217626#c28
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://lore.kernel.org/r/20230818144850.1439-1-mario.limonciello@amd.com
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 914d9d831e6126a6e7a92e27fcfaa250671be42c upstream.
While originally it was fine to format strings using "%pOF" while
holding devtree_lock, this now causes a deadlock. Lockdep reports:
of_get_parent from of_fwnode_get_parent+0x18/0x24
^^^^^^^^^^^^^
of_fwnode_get_parent from fwnode_count_parents+0xc/0x28
fwnode_count_parents from fwnode_full_name_string+0x18/0xac
fwnode_full_name_string from device_node_string+0x1a0/0x404
device_node_string from pointer+0x3c0/0x534
pointer from vsnprintf+0x248/0x36c
vsnprintf from vprintk_store+0x130/0x3b4
Fix this by moving the printing in __of_changeset_entry_apply() outside
the lock. As the only difference in the multiple prints is the action
name, use the existing "action_names" to refactor the prints into a
single print.
Fixes: a92eb7621b ("lib/vsprintf: Make use of fwnode API to obtain node names and separators")
Cc: stable@vger.kernel.org
Reported-by: Geert Uytterhoeven <geert+renesas@glider.be>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20230801-dt-changeset-fixes-v3-2-5f0410e007dd@kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d59070d1076ec5114edb67c87658aeb1d691d381 upstream.
Recent versions of clang warn about an unused variable, though older
versions saw the 'slot++' as a use and did not warn:
radix-tree.c:1136:50: error: parameter 'slot' set but not used [-Werror,-Wunused-but-set-parameter]
It's clearly not needed any more, so just remove it.
Link: https://lkml.kernel.org/r/20230811131023.2226509-1-arnd@kernel.org
Fixes: 3a08cd52c3 ("radix tree: Remove multiorder support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Peng Zhang <zhangpeng.00@bytedance.com>
Cc: Rong Tao <rongtao@cestc.cn>
Cc: Tom Rix <trix@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 382d4cd1847517ffcb1800fd462b625db7b2ebea upstream.
The gcc compiler translates on some architectures the 64-bit
__builtin_clzll() function to a call to the libgcc function __clzdi2(),
which should take a 64-bit parameter on 32- and 64-bit platforms.
But in the current kernel code, the built-in __clzdi2() function is
defined to operate (wrongly) on 32-bit parameters if BITS_PER_LONG ==
32, thus the return values on 32-bit kernels are in the range from
[0..31] instead of the expected [0..63] range.
This patch fixes the in-kernel functions __clzdi2() and __ctzdi2() to
take a 64-bit parameter on 32-bit kernels as well, thus it makes the
functions identical for 32- and 64-bit kernels.
This bug went unnoticed since kernel 3.11 for over 10 years, and here
are some possible reasons for that:
a) Some architectures have assembly instructions to count the bits and
which are used instead of calling __clzdi2(), e.g. on x86 the bsr
instruction and on ppc cntlz is used. On such architectures the
wrong __clzdi2() implementation isn't used and as such the bug has
no effect and won't be noticed.
b) Some architectures link to libgcc.a, and the in-kernel weak
functions get replaced by the correct 64-bit variants from libgcc.a.
c) __builtin_clzll() and __clzdi2() doesn't seem to be used in many
places in the kernel, and most likely only in uncritical functions,
e.g. when printing hex values via seq_put_hex_ll(). The wrong return
value will still print the correct number, but just in a wrong
formatting (e.g. with too many leading zeroes).
d) 32-bit kernels aren't used that much any longer, so they are less
tested.
A trivial testcase to verify if the currently running 32-bit kernel is
affected by the bug is to look at the output of /proc/self/maps:
Here the kernel uses a correct implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
00010000-00019000 r-xp 00000000 08:05 787324 /usr/bin/cat
00019000-0001a000 rwxp 00009000 08:05 787324 /usr/bin/cat
0001a000-0003b000 rwxp 00000000 00:00 0 [heap]
f7551000-f770d000 r-xp 00000000 08:05 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
and this kernel uses the broken implementation of __clzdi2():
root@debian:~# cat /proc/self/maps
0000000010000-0000000019000 r-xp 00000000 000000008:000000005 787324 /usr/bin/cat
0000000019000-000000001a000 rwxp 000000009000 000000008:000000005 787324 /usr/bin/cat
000000001a000-000000003b000 rwxp 00000000 00:00 0 [heap]
00000000f73d1000-00000000f758d000 r-xp 00000000 000000008:000000005 794765 /usr/lib/hppa-linux-gnu/libc.so.6
...
Signed-off-by: Helge Deller <deller@gmx.de>
Fixes: 4df87bb7b6 ("lib: add weak clz/ctz functions")
Cc: Chanho Min <chanho.min@lge.com>
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: stable@vger.kernel.org # v3.11+
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 987aae75fc1041072941ffb622b45ce2359a99b9 upstream.
The automatic recalculation of the maximum allowed MTU is usually triggered
by code sections which are already rtnl lock protected by callers outside
of batman-adv. But when the fragmentation setting is changed via
batman-adv's own batadv genl family, then the rtnl lock is not yet taken.
But dev_set_mtu requires that the caller holds the rtnl lock because it
uses netdevice notifiers. And this code will then fail the check for this
lock:
RTNL: assertion failed at net/core/dev.c (1953)
Cc: stable@vger.kernel.org
Reported-by: syzbot+f8812454d9b3ac00d282@syzkaller.appspotmail.com
Fixes: c6a953cce8d0 ("batman-adv: Trigger events for auto adjusted MTU")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://lore.kernel.org/r/20230821-batadv-missing-mtu-rtnl-lock-v1-1-1c5a7bfe861e@narfation.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d25ddb7e788d34cf27ff1738d11a87cb4b67d446 upstream.
When a client roamed back to a node before it got time to destroy the
pending local entry (i.e. within the same originator interval) the old
global one is directly removed from hash table and left as such.
But because this entry had an extra reference taken at lookup (i.e using
batadv_tt_global_hash_find) there is no way its memory will be reclaimed
at any time causing the following memory leak:
unreferenced object 0xffff0000073c8000 (size 18560):
comm "softirq", pid 0, jiffies 4294907738 (age 228.644s)
hex dump (first 32 bytes):
06 31 ac 12 c7 7a 05 00 01 00 00 00 00 00 00 00 .1...z..........
2c ad be 08 00 80 ff ff 6c b6 be 08 00 80 ff ff ,.......l.......
backtrace:
[<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300
[<000000000ff2fdbc>] batadv_tt_global_add+0x700/0xe20
[<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790
[<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110
[<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10
[<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0
[<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4
[<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0
[<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90
[<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74
[<000000000f39a009>] __netif_receive_skb+0x48/0xe0
[<00000000f2cd8888>] process_backlog+0x174/0x344
[<00000000507d6564>] __napi_poll+0x58/0x1f4
[<00000000b64ef9eb>] net_rx_action+0x504/0x590
[<00000000056fa5e4>] _stext+0x1b8/0x418
[<00000000878879d6>] run_ksoftirqd+0x74/0xa4
unreferenced object 0xffff00000bae1a80 (size 56):
comm "softirq", pid 0, jiffies 4294910888 (age 216.092s)
hex dump (first 32 bytes):
00 78 b1 0b 00 00 ff ff 0d 50 00 00 00 00 00 00 .x.......P......
00 00 00 00 00 00 00 00 50 c8 3c 07 00 00 ff ff ........P.<.....
backtrace:
[<00000000ee6e0ffa>] kmem_cache_alloc+0x1b4/0x300
[<00000000d9aaa49e>] batadv_tt_global_add+0x53c/0xe20
[<00000000443897c7>] _batadv_tt_update_changes+0x21c/0x790
[<000000005dd90463>] batadv_tt_update_changes+0x3c/0x110
[<00000000a2d7fc57>] batadv_tt_tvlv_unicast_handler_v1+0xafc/0xe10
[<0000000011793f2a>] batadv_tvlv_containers_process+0x168/0x2b0
[<00000000b7cbe2ef>] batadv_recv_unicast_tvlv+0xec/0x1f4
[<0000000042aef1d8>] batadv_batman_skb_recv+0x25c/0x3a0
[<00000000bbd8b0a2>] __netif_receive_skb_core.isra.0+0x7a8/0xe90
[<000000004033d428>] __netif_receive_skb_one_core+0x64/0x74
[<000000000f39a009>] __netif_receive_skb+0x48/0xe0
[<00000000f2cd8888>] process_backlog+0x174/0x344
[<00000000507d6564>] __napi_poll+0x58/0x1f4
[<00000000b64ef9eb>] net_rx_action+0x504/0x590
[<00000000056fa5e4>] _stext+0x1b8/0x418
[<00000000878879d6>] run_ksoftirqd+0x74/0xa4
Releasing the extra reference from batadv_tt_global_hash_find even at
roam back when batadv_tt_global_free is called fixes this memory leak.
Cc: stable@vger.kernel.org
Fixes: 068ee6e204 ("batman-adv: roaming handling mechanism redesign")
Signed-off-by: Remi Pommarel <repk@triplefau.lt>
Signed-off-by; Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d8e42a2b0addf238be8b3b37dcd9795a5c1be459 upstream.
If the user set an MTU value, it usually means that there are special
requirements for the MTU. But if an interface gots activated, the MTU was
always recalculated and then the user set value was overwritten.
The only reason why this user set value has to be overwritten, is when the
MTU has to be decreased because batman-adv is not able to transfer packets
with the user specified size.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c6a953cce8d0438391e6da48c8d0793d3fbfcfa6 upstream.
If an interface changes the MTU, it is expected that an NETDEV_PRECHANGEMTU
and NETDEV_CHANGEMTU notification events is triggered. This worked fine for
.ndo_change_mtu based changes because core networking code took care of it.
But for auto-adjustments after hard-interfaces changes, these events were
simply missing.
Due to this problem, non-batman-adv components weren't aware of MTU changes
and thus couldn't perform their own tasks correctly.
Fixes: c6c8fea297 ("net: Add batman-adv meshing protocol")
Cc: stable@vger.kernel.org
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <sw@simonwunderlich.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70d91dc9b2ac91327d0eefd86163abc3548effa6 upstream.
Set the next pointer in filename_trans_read_helper() before attaching
the new node under construction to the list, otherwise garbage would be
dereferenced on subsequent failure during cleanup in the out goto label.
Cc: <stable@vger.kernel.org>
Fixes: 4300590243 ("selinux: implement new format of filename transitions")
Signed-off-by: Christian Göttsche <cgzones@googlemail.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b816601e279756e781e6c4d9b3f3bd21a72ac67 upstream.
We have some reports of linux NFS clients that cannot satisfy a linux knfsd
server that always sets SEQ4_STATUS_RECALLABLE_STATE_REVOKED even though
those clients repeatedly walk all their known state using TEST_STATEID and
receive NFS4_OK for all.
Its possible for revoke_delegation() to set NFS4_REVOKED_DELEG_STID, then
nfsd4_free_stateid() finds the delegation and returns NFS4_OK to
FREE_STATEID. Afterward, revoke_delegation() moves the same delegation to
cl_revoked. This would produce the observed client/server effect.
Fix this by ensuring that the setting of sc_type to NFS4_REVOKED_DELEG_STID
and move to cl_revoked happens within the same cl_lock. This will allow
nfsd4_free_stateid() to properly remove the delegation from cl_revoked.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2217103
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2176575
Signed-off-by: Benjamin Coddington <bcodding@redhat.com>
Cc: stable@vger.kernel.org # v4.17+
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
