[ Upstream commit f66155905959076619c9c519fb099e8ae6cb6f7b ]
1. Allow field hash configuration for both source and destination IPv6.
2. Configure hardware parser based on hash extract feature enable flag
for IPv6.
3. Fix IPv6 endianness issue while updating the source/destination IP
address via ntuple rule.
Fixes: 56d9f5fd22 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 406bed11fb91a0b35c26fe633d8700febaec6439 ]
1. As per previous implementation, mask and control parameter to
generate the field hash value was not passed to the caller program.
Updated the secret key mbox to share that information as well,
as a part of the fix.
2. Earlier implementation did not consider hash reduction of both
source and destination IPv6 addresses. Only source IPv6 address
was considered. This fix solves that and provides option to hash
Fixes: 56d9f5fd22 ("octeontx2-af: Use hashed field in MCAM key")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 674b3e164238a31f236ac63f82d5d160f7d4c201 ]
1. If a profile does not support DMAC extraction then avoid installing NPC
flow rules for unicast. Similarly, if LXMB(L2 and L3) extraction is not
supported by the profile then avoid installing broadcast and multicast
rules.
2. Allow MCAM entry insertion for promiscuous mode.
3. For the profiles where DMAC is not extracted in MKEX key default
unicast entry installed by AF is not valid. Hence do not use action
from the AF installed default unicast entry for such cases.
4. Adjacent packet header fields in a packet like IP header source
and destination addresses or UDP/TCP header source port and destination
can be extracted together in MKEX profile. Therefore MKEX profile can be
configured to in two ways:
a. Total of 4 bytes from start of UDP header(src port
+ destination port)
or
b. Two bytes from start and two bytes from offset 2
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Link: https://lore.kernel.org/r/20221118053329.2288486-1-sumang@marvell.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Stable-dep-of: 406bed11fb91 ("octeontx2-af: Update/Fix NPC field hash extract feature")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2cee6401c4eaa562abc1d437d5d03e80bbee79c1 ]
1. It is possible to have custom mkex profiles which do not extract
DMAC at all into the key. Hence allow mkex profiles which do not
have DMAC to be loaded into MCAM hardware. This patch also adds
debugging prints needed to identify profiles with wrong
configuration.
2. If a mkex profile set "l2l3mb" field for Rx interface,
then Rx multicast and broadcast entry should be configured.
Signed-off-by: Suman Ghosh <sumang@marvell.com>
Link: https://lore.kernel.org/r/20221031090856.1404303-1-sumang@marvell.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Stable-dep-of: 406bed11fb91 ("octeontx2-af: Update/Fix NPC field hash extract feature")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2a6eecc592b4d59a04d513aa25fc0f30d52100cd ]
CN10kb supports large number of dmac filter flows to be
inserted. Increase the field size to accommodate the same
Fixes: b747923aff ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60999cb83554ebcf6cfff8894bc2c3d99ea858ba ]
In current driver, NPC cam and mem table sizes are read from wrong
register offset. This patch fixes the register offset so that correct
values are populated on read.
Fixes: b747923aff ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c60a6b90e7890453f09e0d2163d6acadabe3415b ]
In the current driver, NPC exact match feature was not getting
enabled as configured bit was not read properly.
for_each_set_bit_from() need end bit as one bit post
position in the bit map to read NPC exact nibble enable
bits properly. This patch fixes the same.
Fixes: b747923aff ("octeontx2-af: Exact match support")
Signed-off-by: Ratheesh Kannoth <rkannoth@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 048486f81d01db4d100af021ee2ea211d19732a0 ]
APR table contains the lmtst base address of PF/VFs. These entries
are updated by the PF/VF during the device probe. The lmtst address
is fetched from HW using "TXN_REQ" and "ADDR_RSP_STS" registers.
The lock tries to protect these registers from getting overwritten
when multiple PFs invokes rvu_get_lmtaddr() simultaneously.
For example, if PF1 submit the request and got permitted before it
reads the response and PF2 got scheduled submit the request then the
response of PF1 is overwritten by the PF2 response.
Fixes: 893ae97214 ("octeontx2-af: cn10k: Support configurable LMTST regions")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Sai Krishna <saikrishnag@marvell.com>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ece90e3665a9b7fb2637fcca26cebd42991580b ]
CPU transcoder mask is used to iterate over the available
CPU transcoders in the macro for_each_cpu_transcoder().
The macro is broken on MTL and got highlighted when audio
state was being tracked for each transcoder added in [1].
Add the missing CPU transcoder mask which is similar to ADL-P
mask but without DSI transcoders.
[1]: https://patchwork.freedesktop.org/patch/523723/
Fixes: 7835303982 ("drm/i915/mtl: Add MeteorLake PCI IDs")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Acked-by: Haridhar Kalvala <haridhar.kalvala@intel.com>
Reviewed-by: Gustavo Sousa <gustavo.sousa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230420221248.2511314-1-radhakrishna.sripada@intel.com
(cherry picked from commit bddc18913bd44adae5c828fd514d570f43ba1576)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d098d83c5d9e107b2df7f5e11f81492f56d2fe7 ]
The hard call timeout is specified in the RXRPC_SET_CALL_TIMEOUT cmsg in
seconds, so fix the point at which sendmsg() applies it to the call to
convert to jiffies from seconds, not milliseconds.
Fixes: a158bdd324 ("rxrpc: Fix timeout of a call that hasn't yet been granted a channel")
Signed-off-by: David Howells <dhowells@redhat.com>
cc: Marc Dionne <marc.dionne@auristor.com>
cc: "David S. Miller" <davem@davemloft.net>
cc: Eric Dumazet <edumazet@google.com>
cc: Jakub Kicinski <kuba@kernel.org>
cc: Paolo Abeni <pabeni@redhat.com>
cc: linux-afs@lists.infradead.org
cc: netdev@vger.kernel.org
cc: linux-kernel@vger.kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 281900a923d4c50df109b52a22ae3cdac150159b ]
The sfc driver does not report QSFP module EEPROM contents correctly
as only the first page is fetched from hardware.
Commit 0e1a2a3e6e ("ethtool: Add SFF-8436 and SFF-8636 max EEPROM
length definitions") added ETH_MODULE_SFF_8436_MAX_LEN for the overall
size of the EEPROM info, so use that to report the full EEPROM contents.
Fixes: 9b17010da5 ("sfc: Add ethtool -m support for QSFP modules")
Signed-off-by: Andy Moreton <andy.moreton@amd.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cce8334f4aacd9936309a002d4a4de92a07cd2c2 ]
Move setting r8153b_rx_agg_chg_indicate() for 2.5G devices. The
r8153b_rx_agg_chg_indicate() has to be called after enabling tx/rx.
Otherwise, the coalescing settings are useless.
Fixes: 195aae321c ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 61b0ad6f58e2066e054c6d4839d67974d2861a7d ]
Fix the poor throughput for 2.5G devices, when changing the speed from
auto mode to force mode. This patch is used to notify the MAC when the
mode is changed.
Fixes: 195aae321c ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ceda6d5a1e5402fd852e6cc59a286ce3dc545ee ]
The feature of flow control becomes abnormal, if the device sends a
pause frame and the tx/rx is disabled before sending a release frame. It
causes the lost of packets.
Set PLA_RX_FIFO_FULL and PLA_RX_FIFO_EMPTY to zeros before disabling the
tx/rx. And, toggle FC_PATCH_TASK before enabling tx/rx to reset the flow
control patch and timer. Then, the hardware could clear the state and
the flow control becomes normal after enabling tx/rx.
Besides, remove inline for fc_pause_on_auto() and fc_pause_off_auto().
Fixes: 195aae321c ("r8152: support new chips")
Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 526f28bd0fbdc699cda31426928802650c1528e5 ]
There are cases where the device is adminstratively UP, but operationally
down. For example, we have a physical device (Nvidia ConnectX-6 Dx, 25Gbps)
who's cable was pulled out, here is its ip link output:
5: ens2f1: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN mode DEFAULT group default qlen 1000
link/ether b8:ce:f6:4b:68:35 brd ff:ff:ff:ff:ff:ff
altname enp179s0f1np1
As you can see, it's administratively UP but operationally down.
In this case, sending a packet to this port caused a nasty kernel hang (so
nasty that we were unable to capture it). Aborting a transmit based on
operational status (in addition to administrative status) fixes the issue.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Acked-by: Jamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: Victor Nogueira <victor@mojatatu.com>
v1->v2: Add fixes tag
v2->v3: Remove blank line between tags + add change log, suggested by Leon
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f855779a3874eee70e9f6be57b5f7774f14e510 ]
Update the msg->len value correctly for SMBUS block read. The discrepancy
went unnoticed as msg->len is used in SMBUS transfers only when a PEC
byte is added.
Fixes: d7583c8a57 ("i2c: tegra: Add SMBus block read function")
Signed-off-by: Akhil R <akhilrajeev@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Wolfram Sang <wsa@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a15c90b67a662c75f469822a7f95c7aaa049e28f ]
Currently kernel_page_present() function doesn't support huge page
detection causes the function to mistakenly return false to the
hibernation core.
Add huge page detection to the function to solve the problem.
Fixes: 9e953cda5c ("riscv: Introduce huge page support for 32/64bit kernel")
Signed-off-by: Sia Jee Heng <jeeheng.sia@starfivetech.com>
Reviewed-by: Ley Foon Tan <leyfoon.tan@starfivetech.com>
Reviewed-by: Mason Huo <mason.huo@starfivetech.com>
Reviewed-by: Andrew Jones <ajones@ventanamicro.com>
Reviewed-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20230330064321.1008373-4-jeeheng.sia@starfivetech.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f5390750645756bd5da2b24fac285f2654dd922 ]
The commit in Fixes has only updated the remove function and missed the
error handling path of the probe.
Add the missing reset_control_assert() call.
Fixes: 65a3b6935d ("watchdog: dw_wdt: get reset lines from dt")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/fbb650650bbb33a8fa2fd028c23157bedeed50e1.1682491863.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Wim Van Sebroeck <wim@linux-watchdog.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8176080d59e6d4ff9fc97ae534063073b4f7a715 ]
Kernel hang in blkg_destroy_all() when total blkg greater than
BLKG_DESTROY_BATCH_SIZE, because of not removing destroyed blkg in
blkg_list. So the size of blkg_list is same after destroying a
batch of blkg, and the infinite 'restart' occurs.
Since blkg should stay on the queue list until blkg_free_workfn(),
skip destroyed blkg when restart a new round, which will solve this
kernel hang issue and satisfy the previous will to restart.
Reported-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Xiangfei Ma <xiangfeix.ma@intel.com>
Tested-by: Farrah Chen <farrah.chen@intel.com>
Signed-off-by: Tao Su <tao1.su@linux.intel.com>
Fixes: f1c006f1c685 ("blk-cgroup: synchronize pd_free_fn() from blkg_free_workfn() and blkcg_deactivate_policy()")
Suggested-and-reviewed-by: Yu Kuai <yukuai3@huawei.com>
Link: https://lore.kernel.org/r/20230428045149.1310073-1-tao1.su@linux.intel.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e46c89c74f2c38e5337d2cf44b0b551adff1cb4 ]
the variable 'history' is of type u16, it may be an error
that the hweight32 macro was used for it
I guess macro hweight16 should be used
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 2a81490811 ("writeback: implement foreign cgroup inode detection")
Signed-off-by: Maxim Korotkov <korotkov.maxim.s@gmail.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20230119104443.3002-1-korotkov.maxim.s@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dc6456e938e938d64ffb6383a286b2ac9790a37f ]
The skb hash comes from sk->sk_txhash when using TCP, except for some
IPv6 RST packets. This is because in tcp_v6_send_reset when not in
TIME_WAIT the hash is taken from sk->sk_hash, while it should come from
sk->sk_txhash as those two hashes are not computed the same way.
Packetdrill script to test the above,
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 fcntl(3, F_SETFL, O_RDWR|O_NONBLOCK) = 0
+0 connect(3, ..., ...) = -1 EINPROGRESS (Operation now in progress)
+0 > (flowlabel 0x1) S 0:0(0) <...>
// Wrong ack seq, trigger a rst.
+0 < S. 0:0(0) ack 0 win 4000
// Check the flowlabel matches prior one from SYN.
+0 > (flowlabel 0x1) R 0:0(0) <...>
Fixes: 9258b8b1be ("ipv6: tcp: send consistent autoflowlabel in RST packets")
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46ef24c60f8ee70662968ac55325297ed4624d61 ]
On some distributions, the rp_filter is automatically set (=1) by
default on a netdev basis (also on VRFs).
In an SRv6 End.DT46 behavior, decapsulated IPv4 packets are routed using
the table associated with the VRF bound to that tunnel. During lookup
operations, the rp_filter can lead to packet loss when activated on the
VRF.
Therefore, we chose to make this selftest more robust by explicitly
disabling the rp_filter during tests (as it is automatically set by some
Linux distributions).
Fixes: 03a0b567a0 ("selftests: seg6: add selftest for SRv6 End.DT46 Behavior")
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Andrea Mayer <andrea.mayer@uniroma2.it>
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c88f8d5cd95fd039cff95d682b8e71100c001df0 ]
When a tunnel device is bound with the underlying device, its
dev->needed_headroom needs to be updated properly. IPv4 tunnels
already do the same in ip_tunnel_bind_dev(). Otherwise we may
not have enough header room for skb, especially after commit
b17f709a24 ("gue: TX support for using remote checksum offload option").
Fixes: 32b8a8e59c ("sit: add IPv4 over IPv4 support")
Reported-by: Palash Oswal <oswalpalash@gmail.com>
Link: https://lore.kernel.org/netdev/CAGyP=7fDcSPKu6nttbGwt7RXzE3uyYxLjCSE97J64pRxJP8jPA@mail.gmail.com/
Cc: Kuniyuki Iwashima <kuniyu@amazon.com>
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Cong Wang <cong.wang@bytedance.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e692df3933628d974acb9f5b334d2b3e885e2a6 ]
David Ahern reported crashes in skb_copy_ubufs() caused by TCP tx zerocopy
using hugepages, and skb length bigger than ~68 KB.
skb_copy_ubufs() assumed it could copy all payload using up to
MAX_SKB_FRAGS order-0 pages.
This assumption broke when BIG TCP was able to put up to 512 KB per skb.
We did not hit this bug at Google because we use CONFIG_MAX_SKB_FRAGS=45
and limit gso_max_size to 180000.
A solution is to use higher order pages if needed.
v2: add missing __GFP_COMP, or we leak memory.
Fixes: 7c4e983c4f ("net: allow gso_max_size to exceed 65536")
Reported-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/netdev/c70000f6-baa4-4a05-46d0-4b3e0dc1ccc8@gmail.com/T/
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Xin Long <lucien.xin@gmail.com>
Cc: Willem de Bruijn <willemb@google.com>
Cc: Coco Li <lixiaoyan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f75cd166a5a3c0bc50441faa8b8304f60522fdd ]
ncsi_channel_is_tx() determines whether a given channel should be
used for Tx or not. However, when reconfiguring the channel by
handling a Configuration Required AEN, there is a misjudgment that
the channel Tx has already been enabled, which results in the Enable
Channel Network Tx command not being sent.
Clear the channel Tx enable flag before reconfiguring the channel to
avoid the misjudgment.
Fixes: 8d951a75d0 ("net/ncsi: Configure multi-package, multi-channel modes with failover")
Signed-off-by: Cosmo Chou <chou.cosmo@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c99bace4ad08ad0264285ba8ad73117560992c2 ]
After creating SecYs, SCs and SAs a SecY can be modified
to change attributes like validation mode, protect frames
mode etc. During this SecY update, packet number is reset to
initial user given value by mistake. Hence do not reset
PN when updating SecY parameters.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9bdfe61054fb2b989eb58df20bf99c0cf67e3038 ]
Macsec stats like InPktsLate and InPktsDelayed share
same counter in hardware. If SecY replay_protect is true
then counter represents InPktsLate otherwise InPktsDelayed.
This mode change was tracked based on protect_frames
instead of replay_protect mistakenly. Similarly InPktsUnchecked
and InPktsOk share same counter and mode change was tracked
based on validate_check instead of validate_disabled.
This patch fixes those problems.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 57d00d4364f314485092667d2a48718985515deb ]
On CN10KB silicon a single hardware macsec block is
present and offloads macsec operations for all the
ethernet LMACs. TCAM match with macsec ethertype 0x88e5
alone at RX side is not sufficient to distinguish all the
macsec interfaces created on top of netdevs. Hence append
the DMAC of the macsec interface too. Otherwise the first
created macsec interface only receives all the macsec traffic.
Fixes: c54ffc7360 ("octeontx2-pf: mcs: Introduce MACSEC hardware offloading")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65cdc2b637a5749c7dec0ce14fe2c48f1f91f671 ]
When ptp timestamp is enabled in RPM, RPM will append 8B
timestamp header for all RX traffic. MCS need to skip these
8 bytes header while parsing the packet header, so that
correct tcam key is created for lookup.
This patch fixes the mcs parser configuration to skip this
8B header for ptp packets.
Fixes: ca7f49ff88 ("octeontx2-af: cn10k: Introduce driver for macsec block.")
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b51612198603fce33d6cf57b4864e3018a1cd9b8 ]
As per hardware errata on CN10KB, all the four TCAM_DATA
and TCAM_MASK registers has to be written at once otherwise
write to individual registers will fail. Hence write to all
TCAM_DATA registers and then to all TCAM_MASK registers.
Fixes: cfc14181d4 ("octeontx2-af: cn10k: mcs: Manage the MCS block hardware resources")
Signed-off-by: Subbaraya Sundeep <sbhatta@marvell.com>
Signed-off-by: Sunil Kovvuri Goutham <sgoutham@marvell.com>
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c222b292a3568754828ffd30338d2909b14ed160 ]
For each lmac port, MCS has two MCS_TOP_SLAVE_CHANNEL_CONFIGX
registers. For CN10KB both register need to be configured for the
port level mcs bypass to work. This patch also sets bitmap
of flowid/secy entry reserved for default bypass so that these
entries can be shown in debugfs.
Fixes: bd69476e86 ("octeontx2-af: cn10k: mcs: Install a default TCAM for normal traffic")
Signed-off-by: Geetha sowjanya <gakula@marvell.com>
Signed-off-by: Sunil Goutham <sgoutham@marvell.com>
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c23ae5091a8b3e50fe755257df020907e7c029bb ]
Commit 4fe815850b ("ixgbe: let the xdpdrv work with more than 64 cpus")
adds support to allow XDP programs to run on systems with more than
64 CPUs by locking the XDP TX rings and indexing them using cpu % 64
(IXGBE_MAX_XDP_QS).
Upon trying this out patch on a system with more than 64 cores,
the kernel paniced with an array-index-out-of-bounds at the return in
ixgbe_determine_xdp_ring in ixgbe.h, which means ixgbe_determine_xdp_q_idx
was just returning the cpu instead of cpu % IXGBE_MAX_XDP_QS. An example
splat:
==========================================================================
UBSAN: array-index-out-of-bounds in
/var/lib/dkms/ixgbe/5.18.6+focal-1/build/src/ixgbe.h:1147:26
index 65 is out of range for type 'ixgbe_ring *[64]'
==========================================================================
BUG: kernel NULL pointer dereference, address: 0000000000000058
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 65 PID: 408 Comm: ksoftirqd/65
Tainted: G IOE 5.15.0-48-generic #54~20.04.1-Ubuntu
Hardware name: Dell Inc. PowerEdge R640/0W23H8, BIOS 2.5.4 01/13/2020
RIP: 0010:ixgbe_xmit_xdp_ring+0x1b/0x1c0 [ixgbe]
Code: 3b 52 d4 cf e9 42 f2 ff ff 66 0f 1f 44 00 00 0f 1f 44 00 00 55 b9
00 00 00 00 48 89 e5 41 57 41 56 41 55 41 54 53 48 83 ec 08 <44> 0f b7
47 58 0f b7 47 5a 0f b7 57 54 44 0f b7 76 08 66 41 39 c0
RSP: 0018:ffffbc3fcd88fcb0 EFLAGS: 00010282
RAX: ffff92a253260980 RBX: ffffbc3fe68b00a0 RCX: 0000000000000000
RDX: ffff928b5f659000 RSI: ffff928b5f659000 RDI: 0000000000000000
RBP: ffffbc3fcd88fce0 R08: ffff92b9dfc20580 R09: 0000000000000001
R10: 3d3d3d3d3d3d3d3d R11: 3d3d3d3d3d3d3d3d R12: 0000000000000000
R13: ffff928b2f0fa8c0 R14: ffff928b9be20050 R15: 000000000000003c
FS: 0000000000000000(0000) GS:ffff92b9dfc00000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000058 CR3: 000000011dd6a002 CR4: 00000000007706e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
ixgbe_poll+0x103e/0x1280 [ixgbe]
? sched_clock_cpu+0x12/0xe0
__napi_poll+0x30/0x160
net_rx_action+0x11c/0x270
__do_softirq+0xda/0x2ee
run_ksoftirqd+0x2f/0x50
smpboot_thread_fn+0xb7/0x150
? sort_range+0x30/0x30
kthread+0x127/0x150
? set_kthread_struct+0x50/0x50
ret_from_fork+0x1f/0x30
</TASK>
I think this is how it happens:
Upon loading the first XDP program on a system with more than 64 CPUs,
ixgbe_xdp_locking_key is incremented in ixgbe_xdp_setup. However,
immediately after this, the rings are reconfigured by ixgbe_setup_tc.
ixgbe_setup_tc calls ixgbe_clear_interrupt_scheme which calls
ixgbe_free_q_vectors which calls ixgbe_free_q_vector in a loop.
ixgbe_free_q_vector decrements ixgbe_xdp_locking_key once per call if
it is non-zero. Commenting out the decrement in ixgbe_free_q_vector
stopped my system from panicing.
I suspect to make the original patch work, I would need to load an XDP
program and then replace it in order to get ixgbe_xdp_locking_key back
above 0 since ixgbe_setup_tc is only called when transitioning between
XDP and non-XDP ring configurations, while ixgbe_xdp_locking_key is
incremented every time ixgbe_xdp_setup is called.
Also, ixgbe_setup_tc can be called via ethtool --set-channels, so this
becomes another path to decrement ixgbe_xdp_locking_key to 0 on systems
with more than 64 CPUs.
Since ixgbe_xdp_locking_key only protects the XDP_TX path and is tied
to the number of CPUs present, there is no reason to disable it upon
unloading an XDP program. To avoid confusion, I have moved enabling
ixgbe_xdp_locking_key into ixgbe_sw_init, which is part of the probe path.
Fixes: 4fe815850b ("ixgbe: let the xdpdrv work with more than 64 cpus")
Signed-off-by: John Hickey <jjh@daedalian.us>
Reviewed-by: Maciej Fijalkowski <maciej.fijalkowski@intel.com>
Tested-by: Chandan Kumar Rout <chandanx.rout@intel.com> (A Contingent Worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://lore.kernel.org/r/20230425170308.2522429-1-anthony.l.nguyen@intel.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99d92eaca5d915763b240aae24669f5bf3227ecf ]
[Why & How]
There's no need to clear GPINT register for DMUB
when releasing it from reset. Fix that.
Fixes: ac2e555e0a ("drm/amd/display: Add DMCUB source files and changes for DCN32/321")
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 822b84ecfc646da0f87fd947fa00dc3be5e45ecc ]
When the commit fff7eb56b3 ("drm/amd/display: Don't set dram clock
change requirement for SubVP") was merged, we missed some parts
associated with the MCLK switch. This commit adds all the missing parts.
Fixes: fff7eb56b3 ("drm/amd/display: Don't set dram clock change requirement for SubVP")
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bbfbf09d193ac831c40db50ef4b31d11548a9eef ]
As part of the programming expectation for using DML functions, DC
requires that any DML function invoked outside DML uses:
DC_FP_START();
... dml function ...
DC_FP_END();
Additionally, all the DML functions that can be invoked outside the DML
folder call the function dc_assert_fp_enabled(), which is responsible
for triggering a warning in the case that the DML function was not
guarded by the DC_FP_START/END. For this reason, call DC_FP_START/END
inside DML is wrong, and this commit removes all of those references.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Stable-dep-of: 822b84ecfc64 ("drm/amd/display: Add missing WA and MCLK validation")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5749639f2d0a1f6cbe187d05f70c2e7c544d748 ]
In qedi_probe() we call __qedi_probe() which initializes
&qedi->recovery_work with qedi_recovery_handler() and
&qedi->board_disable_work with qedi_board_disable_work().
When qedi_schedule_recovery_handler() is called, schedule_delayed_work()
will finally start the work.
In qedi_remove(), which is called to remove the driver, the following
sequence may be observed:
Fix this by finishing the work before cleanup in qedi_remove().
CPU0 CPU1
|qedi_recovery_handler
qedi_remove |
__qedi_remove |
iscsi_host_free |
scsi_host_put |
//free shost |
|iscsi_host_for_each_session
|//use qedi->shost
Cancel recovery_work and board_disable_work in __qedi_remove().
Fixes: 4b1068f5d7 ("scsi: qedi: Add MFW error recovery process")
Signed-off-by: Zheng Wang <zyytlz.wz@163.com>
Link: https://lore.kernel.org/r/20230413033422.28003-1-zyytlz.wz@163.com
Acked-by: Manish Rangankar <mrangankar@marvell.com>
Reviewed-by: Mike Christie <michael.christie@oracle.com>
Signed-off-by: Martin K. Petersen <martin.petersen@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c963e2ec095cb3f855890be53f56f5a6c6fbe371 ]
Commit 7e1d728a94 ("ASoC: Intel: soc-acpi-byt: Add new WM5102 ACPI HID")
added an extra HID to wm5102_comp_ids.codecs, but it forgot to bump
wm5102_comp_ids.num_codecs, causing the last codec HID in the codecs list
to no longer work.
Bump wm5102_comp_ids.num_codecs to fix this.
Fixes: 7e1d728a94 ("ASoC: Intel: soc-acpi-byt: Add new WM5102 ACPI HID")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230421183714.35186-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf9f4c0eb1699d306e348b1fd0225af7b2c282d3 ]
Refresh the MMU's snapshot of the vCPU's CR0.WP prior to checking for
permission faults when emulating a guest memory access and CR0.WP may be
guest owned. If the guest toggles only CR0.WP and triggers emulation of
a supervisor write, e.g. when KVM is emulating UMIP, KVM may consume a
stale CR0.WP, i.e. use stale protection bits metadata.
Note, KVM passes through CR0.WP if and only if EPT is enabled as CR0.WP
is part of the MMU role for legacy shadow paging, and SVM (NPT) doesn't
support per-bit interception controls for CR0. Don't bother checking for
EPT vs. NPT as the "old == new" check will always be true under NPT, i.e.
the only cost is the read of vcpu->arch.cr4 (SVM unconditionally grabs CR0
from the VMCB on VM-Exit).
Reported-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lkml.kernel.org/r/677169b4-051f-fcae-756b-9a3e1bb9f8fe%40grsecurity.net
Fixes: fb509f76acc8 ("KVM: VMX: Make CR0.WP a guest owned bit")
Tested-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230405002608.418442-1-seanjc@google.com
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net> # backport to v6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb509f76acc8d42bed11bca308404f81c2be856a ]
Guests like grsecurity that make heavy use of CR0.WP to implement kernel
level W^X will suffer from the implied VMEXITs.
With EPT there is no need to intercept a guest change of CR0.WP, so
simply make it a guest owned bit if we can do so.
This implies that a read of a guest's CR0.WP bit might need a VMREAD.
However, the only potentially affected user seems to be kvm_init_mmu()
which is a heavy operation to begin with. But also most callers already
cache the full value of CR0 anyway, so no additional VMREAD is needed.
The only exception is nested_vmx_load_cr3().
This change is VMX-specific, as SVM has no such fine grained control
register intercept control.
Suggested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net>
Link: https://lore.kernel.org/r/20230322013731.102955-7-minipli@grsecurity.net
Co-developed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Mathias Krause <minipli@grsecurity.net> # backport to v6.1.x
Signed-off-by: Sasha Levin <sashal@kernel.org>
