If an architecture does not support 64 bit dma addresses then testing
for an expected dma address >= 0x100000000 will fail.
Fixes: e0d072782c73 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Signed-off-by: Frank Rowand <frank.rowand@sony.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211212221852.233295-1-frowand.list@gmail.com
The struct device variable "dev_bogus" was triggering this warning
on a PowerPC build:
drivers/of/unittest.c: In function 'of_unittest_dma_ranges_one.constprop':
[...] >> The frame size of 1424 bytes is larger than 1024 bytes
[-Wframe-larger-than=]
This variable is now dynamically allocated.
Fixes: e0d072782c734 ("dma-mapping: introduce DMA range map, supplanting dma_pfn_offset")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jim Quinlan <jim2101024@gmail.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Frank Rowand <frank.rowand@sony.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211210184636.7273-2-jim2101024@gmail.com
Converts txt binding to new YAML format and simplify example.
Reviewed-by: Sebastian Reichel <sre@kernel.org>
Signed-off-by: David Heidelberg <david@ixit.cz>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211208183434.98087-1-david@ixit.cz
With 'unevaluatedProperties' support implemented, there's a number of
warnings from the Designware PCIe based bindings:
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dt.yaml: pcie@1ffc000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', 'device_type', 'bus-range', 'ranges', '#interrupt-cells', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/fsl,imx6q-pcie.example.dt.yaml: pcie@1ffc000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f4000000: Unevaluated properties are not allowed ('bus-range', '#address-cells', '#size-cells', 'device_type', 'ranges', 'num-lanes', '#interrupt-cells', 'interrupts', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'clocks', 'clock-names' were unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f4000000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f5000000: Unevaluated properties are not allowed ('bus-range', '#address-cells', '#size-cells', 'device_type', 'phys', 'ranges', 'num-lanes', '#interrupt-cells', 'interrupts', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'reset-gpios', 'pcie@0,0' were unexpected)
Documentation/devicetree/bindings/pci/hisilicon,kirin-pcie.example.dt.yaml: pcie@f5000000: Unevaluated properties are not allowed ('phys', 'hisilicon,clken-gpios' were unexpected)
Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml: pcie@d0e00000: Unevaluated properties are not allowed ('device_type', '#address-cells', '#size-cells', 'linux,pci-domain', 'bus-range', '#interrupt-cells', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/intel-gw-pcie.example.dt.yaml: pcie@d0e00000: Unevaluated properties are not allowed ('resets', 'phys', 'phy-names', 'reset-assert-ms' were unexpected)
Documentation/devicetree/bindings/pci/rockchip-dw-pcie.example.dt.yaml: pcie@fe280000: Unevaluated properties are not allowed ('clock-names', 'msi-map', 'phys', 'phy-names', 'power-domains', 'resets', 'reset-names' were unexpected)
Documentation/devicetree/bindings/pci/samsung,exynos-pcie.example.dt.yaml: pcie@15700000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', '#interrupt-cells', 'device_type', 'bus-range', 'ranges', 'interrupt-map-mask', 'interrupt-map' were unexpected)
Documentation/devicetree/bindings/pci/samsung,exynos-pcie.example.dt.yaml: pcie@15700000: Unevaluated properties are not allowed ('clock-names', 'phys', 'vdd10-supply', 'vdd18-supply' were unexpected)
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.example.dt.yaml: pcie@e00000000: Unevaluated properties are not allowed ('#address-cells', '#size-cells', '#interrupt-cells', 'device_type', 'dma-coherent', 'bus-range', 'ranges', 'interrupts', 'interrupt-parent', 'interrupt-map-mask', 'interrupt-map', 'clock-names', 'clocks' were unexpected)
Documentation/devicetree/bindings/pci/sifive,fu740-pcie.example.dt.yaml: pcie@e00000000: Unevaluated properties are not allowed ('dma-coherent', 'clock-names', 'resets', 'pwren-gpios' were unexpected)
Documentation/devicetree/bindings/pci/socionext,uniphier-pcie-ep.example.dt.yaml: pcie-ep@66000000: Unevaluated properties are not allowed ('clock-names', 'clocks', 'reset-names', 'resets', 'phy-names', 'phys' were unexpected)
Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.example.dt.yaml: pcie@28400000: Unevaluated properties are not allowed ('clock-names' was unexpected)
Documentation/devicetree/bindings/pci/toshiba,visconti-pcie.example.dt.yaml: pcie@28400000: Unevaluated properties are not allowed ('device_type', 'bus-range', 'num-viewport', '#address-cells', '#size-cells', '#interrupt-cells', 'ranges', 'interrupt-names', 'interrupt-map-mask', 'interrupt-map', 'max-link-speed' were unexpected)
The main problem is that snps,dw-pcie.yaml and snps,dw-pcie-ep.yaml
shouldn't set 'unevaluatedProperties: false'. Otherwise, bindings that
reference them cannot add additional properties. With that addressed,
there's a handful of other undocumented properties to add.
Cc: Xiaowei Song <songxiaowei@hisilicon.com>
Cc: Binghui Wang <wangbinghui@hisilicon.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>
Cc: Greentime Hu <greentime.hu@sifive.com>
Cc: Palmer Dabbelt <palmer@dabbelt.com>
Cc: Jingoo Han <jingoohan1@gmail.com>
Cc: Gustavo Pimentel <gustavo.pimentel@synopsys.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-riscv@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206194426.2470080-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the TI j721e endpoint
binding example has a warning:
Documentation/devicetree/bindings/pci/ti,j721e-pci-ep.example.dt.yaml: pcie-ep@d000000: Unevaluated properties are not allowed ('max-link-speed', 'num-lanes', 'max-functions' were unexpected)
Adjust where pci-ep.yaml is referenced so that ti,j721e-pci-ep.yaml will
include it.
Cc: Tom Joseph <tjoseph@cadence.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211206194413.2469643-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, there's several
warnings due to undocumented properties:
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@0,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@1,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek,mt7621-pcie.example.dt.yaml: pcie@1e140000: pcie@2,0: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.example.dt.yaml: pcie@11230000: Unevaluated properties are not allowed ('phy-names' was unexpected)
Documentation/devicetree/bindings/pci/microchip,pcie-host.example.dt.yaml: pcie@2030000000: Unevaluated properties are not allowed ('interrupt-controller' was unexpected)
Documentation/devicetree/bindings/pci/ti,am65-pci-ep.example.dt.yaml: pcie-ep@5500000: Unevaluated properties are not allowed ('num-ib-windows', 'num-ob-windows' were unexpected)
Documentation/devicetree/bindings/pci/ti,am65-pci-host.example.dt.yaml: pcie@5500000: Unevaluated properties are not allowed ('num-viewport', 'interrupts' were unexpected)
Documentation/devicetree/bindings/pci/ti,j721e-pci-host.example.dt.yaml: pcie@2900000: Unevaluated properties are not allowed ('dma-coherent' was unexpected)
Add the necessary property definitions or remove the properties from the
examples to fix these warnings.
Cc: Ryder Lee <ryder.lee@mediatek.com>
Cc: Jianjun Wang <jianjun.wang@mediatek.com>
Cc: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Matthias Brugger <matthias.bgg@gmail.com>
Cc: Daire McNamara <daire.mcnamara@microchip.com>
Cc: Abraham I <kishon@ti.com>
Cc: linux-pci@vger.kernel.org
Cc: linux-mediatek@lists.infradead.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Link: https://lore.kernel.org/r/20211206194406.2469361-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the TI GPMC example
has a warning:
Documentation/devicetree/bindings/mtd/ti,gpmc-onenand.example.dt.yaml: memory-controller@6e000000: onenand@0,0: Unevaluated properties are not allowed ('compatible', '#address-cells', '#size-cells', 'partition@0', 'partition@100000' were unexpected)
The child node definition for GPMC is not a complete binding, so specifying
'unevaluatedProperties: false' for it is not correct and should be
dropped.
Fixup the unnecessary 'allOf' while we're here.
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Cc: Tony Lindgren <tony@atomide.com>
Cc: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211206174215.2297796-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the following warnings
are generated in the usb examples:
Documentation/devicetree/bindings/usb/intel,keembay-dwc3.example.dt.yaml: usb: usb@34000000: Unevaluated properties are not allowed ('reg' was unexpected)
Documentation/devicetree/bindings/usb/snps,dwc3.example.dt.yaml: usb@4a030000: Unevaluated properties are not allowed ('reg' was unexpected)
Add the missing property definitions.
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Ahmad Zainie <wan.ahmad.zainie.wan.mohamad@intel.com>
Cc: Felipe Balbi <balbi@kernel.org>
Cc: linux-usb@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174113.2295616-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the atmel,sama5d4-wdt
example has the following warning:
/home/rob/proj/git/linux-dt/.build-arm64/Documentation/devicetree/bindings/watchdog/atmel,sama5d4-wdt.example.dt.yaml: watchdog@fc068640: Unevaluated properties are not allowed ('interrupts' was unexpected)
Document the missing 'interrupts' property.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Ludovic Desroches <ludovic.desroches@microchip.com>
Cc: Eugen Hristev <eugen.hristev@microchip.com>
Cc: linux-watchdog@vger.kernel.org
Cc: linux-arm-kernel@lists.infradead.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/20211206174045.2294873-1-robh@kernel.org
With 'unevaluatedProperties' support implemented, the ti,rti-wdt example
has the following warning:
/home/rob/proj/git/linux-dt/.build-arm64/Documentation/devicetree/bindings/watchdog/ti,rti-wdt.example.dt.yaml: watchdog@2200000: Unevaluated properties are not allowed ('assigned-clock-parents' was unexpected)
The problem is the schema has a typo in 'assigned-clocks-parents'. As
it is not required to list assigned clocks in bindings, just drop the
property definitions to fix this.
Cc: Wim Van Sebroeck <wim@linux-watchdog.org>
Cc: Guenter Roeck <linux@roeck-us.net>
Cc: Tero Kristo <t-kristo@ti.com>
Cc: linux-watchdog@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Acked-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20211206174028.2294330-1-robh@kernel.org
'#interrupt-cells' is not documented which causes a warning when
'unevaluatedProperties' is implemented. Unless the I2C controller is
also an interrupt controller, '#interrupt-cells' is not valid. This
doesn't appear to be the case from the driver, so just remove it from
the example.
Cc: Brendan Higgins <brendanhiggins@google.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Joel Stanley <joel@jms.id.au>
Cc: Andrew Jeffery <andrew@aj.id.au>
Cc: Rayn Chen <rayn_chen@aspeedtech.com>
Cc: linux-i2c@vger.kernel.org
Cc: openbmc@lists.ozlabs.org
Cc: linux-arm-kernel@lists.infradead.org
Cc: linux-aspeed@lists.ozlabs.org
Signed-off-by: Rob Herring <robh@kernel.org>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206174237.2298580-1-robh@kernel.org
DSU-110 is the newest and shiniest for Armv9. Its programmer's model is
largely identical to the previous generation of DSUs, so we can treat it
as compatible, but it does have a a handful of extra IMP-DEF PMU events
to call its own. Thanks to the new notion of core complexes, the maximum
number of supported CPUs goes up as well.
Signed-off-by: Robin Murphy <robin.murphy@arm.com>
Acked-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Link: https://lore.kernel.org/r/51a8060493e1220886dcd468fad9a2b603607297.1639490264.git.robin.murphy@arm.com
Signed-off-by: Rob Herring <robh@kernel.org>
The Renesas RZ/G2{L, LC} SoC (a.k.a R9A07G044) has a Bifrost Mali-G31 GPU,
add a compatible string for it.
Signed-off-by: Biju Das <biju.das.jz@bp.renesas.com>
Reviewed-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@bp.renesas.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20211208104026.421-2-biju.das.jz@bp.renesas.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Broadcom STB L2 generic Level 2 interrupt controller Device
Tree binding to YAML to help with validation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-10-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Broadcom STB BCM7038 Level 1 interrupt controller Device
Tree binding to YAML to help with validation.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-7-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Broadcom STB BCM7038 PWM Device Tree binding to YAML to help
with validation.
Acked-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211208003727.3596577-4-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Conver the iProc PCIe controller Device Tree binding to YAML now that
all DTS in arch/arm and arch/arm64 have been fixed to be compliant.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211214035820.2984289-7-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Broadcom Northstar 2 PCIe PHY Device Tree binding to YAML
and rename it accordingly in the process since it had nothing to do with
a MDIO mux on the PCI(e) bus. This is a pre-requisite to updating
another binding file to YAML.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-8-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the GENET binding to YAML, leveraging brcm,unimac-mdio.yaml and
the standard ethernet-controller.yaml files.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-5-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
MoCA (Multimedia over Coaxial) is used by the internal GENET/MOCA cores
and will be needed in order to convert GENET to YAML in subsequent
changes.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-4-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
Add Doug and myself as maintainers since this binding is used by the
GENET Ethernet controller for its internal MDIO controller.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-3-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The UniMAC MDIO controller integrated into GENET does not provide a
reg-names property since it is optional, reflect that in the binding.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Link: https://lore.kernel.org/r/20211206180049.2086907-2-f.fainelli@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
The old "ak" vendor prefix that was never officially accepted was still
being used in some examples. Convert to the correct vendor prefix (i.e.
"asahi-kasei").
Signed-off-by: Thierry Reding <treding@nvidia.com>
Link: https://lore.kernel.org/r/20211206144802.217073-1-thierry.reding@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
There are valid cases when two nodes can have the same address. For
example, in Exynos SoCs there is USI IP-core, which might be configured
to provide UART, SPI or I2C block, all of which having the same base
register address. But only one can be enabled at a time. That looks like
this:
usi@138200c0 {
serial@13820000 {
status = "okay";
};
i2c@13820000 {
status = "disabled";
};
};
When running "make dt_binding_check", it reports next warning:
Warning (unique_unit_address):
/example-0/usi@138200c0/serial@13820000:
duplicate unit-address (also used in node
/example-0/usi@138200c0/i2c@13820000)
Disable "unique_unit_address" in DTC_FLAGS to suppress warnings like
that, but enable "unique_unit_address_if_enabled" warning, so that dtc
still reports a warning when two enabled nodes are having the same
address.
Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Reported-by: Rob Herring <robh@kernel.org>
Suggested-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20211203183517.11390-1-semen.protsenko@linaro.org
Signed-off-by: Rob Herring <robh@kernel.org>
Convert the Cadence MACB/GEM Ethernet controller Device Tree binding
documentation to json-schema.
Re-add "cdns,gem" (removed in commit a217d8711da5c87f ("dt-bindings:
Remove PicoXcell bindings")) as there are active users on non-PicoXcell
platforms.
Add missing "ether_clk" clock.
Add missing properties.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Link: https://lore.kernel.org/r/104dcbfd22f95fc77de9fe15e8abd83869603ea5.1637927673.git.geert@linux-m68k.org
Signed-off-by: Rob Herring <robh@kernel.org>
To improve human readability and enable automatic validation, the tuples
in "interrupts" properties should be grouped using angle brackets.
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Link: https://lore.kernel.org/r/20211125150233.161576-1-geert@linux-m68k.org
Signed-off-by: Rob Herring <robh@kernel.org>
Both are already used by HW and drivers inside Linux.
Fix warnings as:
arch/arm64/boot/dts/freescale/fsl-ls1028a-kontron-sl28-var2.dt.yaml: ethernet@0,2: fixed-link:speed:0:0: 2500 is not one of [10, 100, 1000]
From schema: Documentation/devicetree/bindings/net/ethernet-controller.yaml
Signed-off-by: David Heidelberg <david@ixit.cz>
Link: https://lore.kernel.org/r/20211124202046.81136-1-david@ixit.cz
Signed-off-by: Rob Herring <robh@kernel.org>
Few Texas Instruments DC-DC converters on PMBus like TPS544B20 do not
have bindings and are used only as hardware monitoring sensor. These
devices are actually not trivial and can receive basic configuration
(e.g. power up mode, CNTL pin polarity, expected input voltage), however
devicetree support for configuration was never added.
Therefore in current state the devices are used only in read-only mode
and have trivial bindings, so document them to have basic dtschema
tests.
Cc: Vincent Pelletier <plr.vincent@gmail.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20211116110207.68494-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Rob Herring <robh@kernel.org>
The ARM Cortex-A78 CPU can be found in a number of recent SoCs such as
the NVIDIA Tegra234 (Orin).
Signed-off-by: Thierry Reding <treding@nvidia.com>
Acked-by: Robin Murphy <robin.muephy@arm.com>
Link: https://lore.kernel.org/r/20211112131904.3683428-1-thierry.reding@gmail.com
Signed-off-by: Rob Herring <robh@kernel.org>
When converting the thermal-zones bindings to yaml the definition of the
contribution property changed. The intention is the same, an integer
value expressing a ratio of a sum on how much cooling is provided by the
device to the zone. But after the conversion the integer value is
limited to the range 0 to 100 and expressed as a percentage.
This is problematic for two reasons.
- This do not match how the binding is used. Out of the 18 files that
make use of the property only two (ste-dbx5x0.dtsi and
ste-hrefv60plus.dtsi) sets it at a value that satisfy the binding,
100. The remaining 16 files set the value higher and fail to validate.
- Expressing the value as a percentage instead of a ratio of the sum is
confusing as there is nothing to enforce the sum in the zone is not
greater then 100.
This patch restore the pre yaml conversion description and removes the
value limitation allowing the usage of the bindings to validate.
Fixes: 1202a442a31fd2e5 ("dt-bindings: thermal: Add yaml bindings for thermal zones")
Reported-by: Kieran Bingham <kieran.bingham+renesas@ideasonboard.com>
Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>
Link: https://lore.kernel.org/r/20211109103045.1403686-1-niklas.soderlund+renesas@ragnatech.se
Signed-off-by: Rob Herring <robh@kernel.org>
In the struct supplier_bindings the member 'node_not_dev' is described as
"The consumer node containing the property is never a device.", but that is
inconsistent with the behaviour of the code in of_link_property(), as it
calls of_get_compat_node() that starts parsing for a compatible property
from the node it gets passed to it. The proper behaviour is to start at the
node's parent, so let's do that.
While at it, let's take the opportunity to update the description of the
'node_not_dev' flag, as to clarify its purpose.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reviewed-by: Saravana Kannan <saravanak@google.com>
Signed-off-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20210902090221.820254-1-ulf.hansson@linaro.org
