* refs/heads/tmp-48dc679:
ANDROID: Creating boot-img.tar.gz for aarch64
ANDROID: kernel: fix debug_kinfo set twice crash issue
Revert "PCI: aardvark: Rewrite IRQ code to chained IRQ handler"
Linux 5.18-rc7
gfs2: Stop using glock holder auto-demotion for now
gfs2: buffered write prefaulting
gfs2: Align read and write chunks to the page cache
gfs2: Pull return value test out of should_fault_in_pages
gfs2: Clean up use of fault_in_iov_iter_{read,write}able
gfs2: Variable rename
gfs2: Fix filesystem block deallocation for short writes
drm/vmwgfx: Disable command buffers on svga3 without gbobjects
drm/vmwgfx: Initialize drm_mode_fb_cmd2
drm/vmwgfx: Fix fencing on SVGAv3
x86/mm: Fix marking of unused sub-pmd ranges
tls: Fix context leak on tls_device_down
net: sfc: ef10: fix memory leak in efx_ef10_mtd_probe()
net/smc: non blocking recvmsg() return -EAGAIN when no data and signal_pending
net: dsa: bcm_sf2: Fix Wake-on-LAN with mac_link_down()
usb: xhci-mtk: remove bandwidth budget table
usb: xhci-mtk: fix fs isoc's transfer error
usb: gadget: fix race when gadget driver register via ioctl
usb: typec: tcpci_mt6360: Update for BMC PHY setting
arm64: Enable repeat tlbi workaround on KRYO4XX gold CPUs
mlxsw: Avoid warning during ip6gre device removal
arm64: cpufeature: remove duplicate ID_AA64ISAR2_EL1 entry
drm/vc4: hdmi: Fix build error for implicit function declaration
net: bcmgenet: Check for Wake-on-LAN interrupt probe deferral
net: ethernet: mediatek: ppe: fix wrong size passed to memset()
Bluetooth: Fix the creation of hdev->name
sched/tracing: Append prev_state to tp args instead
i40e: i40e_main: fix a missing check on list iterator
net/sched: act_pedit: really ensure the skb is writable
thermal: int340x: Mode setting with new OS handshake
drm/amdgpu/ctx: only reset stable pstate if the user changed it (v2)
Revert "drm/amd/pm: keep the BACO feature enabled for suspend"
KVM: PPC: Book3S PR: Enable MSR_DR for switch_mmu_context()
s390/lcs: fix variable dereferenced before check
s390/ctcm: fix potential memory leak
s390/ctcm: fix variable dereferenced before check
net: atlantic: verify hw_head_ lies within TX buffer ring
net: atlantic: add check for MAX_SKB_FRAGS
net: atlantic: reduce scope of is_rsc_complete
net: atlantic: fix "frag[0] not initialized"
net: stmmac: fix missing pci_disable_device() on error in stmmac_pci_probe()
scsi: lpfc: Correct BDE DMA address assignment for GEN_REQ_WQE
scsi: lpfc: Fix split code for FLOGI on FCoE
genirq: Remove WARN_ON_ONCE() in generic_handle_domain_irq()
net: phy: micrel: Fix incorrect variable type in micrel
ANDROID: GKI: Document GKI KUnit differences
ANDROID: GKI: Return ERROR value on KUnit load fail
Documentation/process: Update ARM contact for embargoed hardware issues
MAINTAINERS: Add James and Mike as Arm64 performance events reviewers
udf: Avoid using stale lengthOfImpUse
virtio: fix virtio transitional ids
arm64: vdso: fix makefile dependency on vdso.so
decnet: Use container_of() for struct dn_neigh casts
writeback: Avoid skipping inode writeback
dma-buf: call dma_buf_stats_setup after dmabuf is in valid list
net: atlantic: always deep reset on pm op, fixing up my null deref regression
ceph: check folio PG_private bit instead of folio->private
ceph: fix setting of xattrs on async created inodes
net: dsa: flush switchdev workqueue on bridge join error path
net: phy: Fix race condition on link status change
MAINTAINERS: add a mailing list for DAMON development
selftests: vm: Makefile: rename TARGETS to VMTARGETS
mm/kfence: reset PG_slab and memcg_data before freeing __kfence_pool
mailmap: add entry for martyna.szapar-mudlaw@intel.com
arm[64]/memremap: don't abuse pfn_valid() to ensure presence of linear map
procfs: prevent unprivileged processes accessing fdinfo dir
mm: mremap: fix sign for EFAULT error return value
hwmon: (ltq-cputemp) restrict it to SOC_XWAY
dim: initialize all struct fields
ptp: ocp: Use DIV64_U64_ROUND_UP for rounding.
ethernet: tulip: fix missing pci_disable_device() on error in tulip_init_one()
ionic: fix missing pci_release_regions() on error in ionic_probe()
nfs: fix broken handling of the softreval mount option
slimbus: qcom: Fix IRQ check in qcom_slim_probe
rfkill: uapi: fix RFKILL_IOCTL_MAX_SIZE ioctl request definition
nl80211: fix locking in nl80211_set_tx_bitrate_mask()
mac80211_hwsim: call ieee80211_tx_prepare_skb under RCU protection
mac80211_hwsim: fix RCU protected chanctx access
mailmap: update Kalle Valo's email
fanotify: do not allow setting dirent events in mask of non-dir
selftests net: add UDP GRO fraglist + bpf self-tests
net: fix wrong network header length
net: sfc: fix memory leak due to ptp channel
drm/i915: Fix race in __i915_vma_remove_closed
tools headers UAPI: Sync linux/kvm.h with the kernel sources
perf tests: Fix coresight `perf test` failure.
perf bench: Fix two numa NDEBUG warnings
Linux 5.18-rc6
Revert "parisc: Increase parisc_cache_flush_threshold setting"
parisc: Mark cr16 clock unstable on all SMP machines
parisc: Fix typos in comments
parisc: Change MAX_ADDRESS to become unsigned long long
parisc: Merge model and model name into one line in /proc/cpuinfo
parisc: Re-enable GENERIC_CPU_DEVICES for !SMP
parisc: Update 32- and 64-bit defconfigs
parisc: Only list existing CPUs in cpu_possible_mask
Revert "parisc: Fix patch code locking and flushing"
Revert "parisc: Mark sched_clock unstable only if clocks are not syncronized"
Revert "parisc: Mark cr16 CPU clocksource unstable on all SMP machines"
blk-mq: remove the error_count from struct request
ataflop: use a statically allocated error counters
floppy: use a statically allocated error counter
SUNRPC: Ensure that the gssproxy client can start in a connected state
Revert "SUNRPC: Ensure gss-proxy connects on setup"
fbdev: efifb: Fix a use-after-free due early fb_info cleanup
net: chelsio: cxgb4: Avoid potential negative array offset
netlink: do not reset transport header in netlink_recvmsg()
drm/nouveau: Fix a potential theorical leak in nouveau_get_backlight_name()
drm/nouveau/tegra: Stop using iommu_present()
ipv4: drop dst in multicast routing path
ice: fix PTP stale Tx timestamps cleanup
ice: clear stale Tx queue settings before configuring
ice: Fix race during aux device (un)plugging
KVM: VMX: Exit to userspace if vCPU has injected exception and invalid state
KVM: SEV: Mark nested locking of vcpu->lock
ANDROID: GKI: Add ‘kunit.enable’ module parameter
gpio: pca953x: fix irq_stat not updated when irq is disabled (irq_mask not set)
drm/amd/display: undo clearing of z10 related function pointers
drm/amdgpu: vi: disable ASPM on Intel Alder Lake based systems
platform/surface: aggregator: Fix initialization order when compiling as builtin module
platform/surface: gpe: Add support for Surface Pro 8
platform/x86/intel: Fix 'rmmod pmt_telemetry' panic
platform/x86: thinkpad_acpi: Correct dual fan probe
platform/x86: thinkpad_acpi: Add a s2idle resume quirk for a number of laptops
platform/x86: thinkpad_acpi: Convert btusb DMI list to quirks
Documentation/process: Add embargoed HW contact for Ampere Computing
Documentation/process: Make groups alphabetical and use tabs consistently
firmware_loader: use kernel credentials when reading firmware
fbdev: vesafb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: efifb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: simplefb: Cleanup fb_info in .fb_destroy rather than .remove
fbdev: Prevent possible use-after-free in fb_release()
Revert "fbdev: Make fb_release() return -ENODEV if fbdev was unregistered"
powerpc/papr_scm: Fix buffer overflow issue with CONFIG_FORTIFY_SOURCE
net: mscc: ocelot: avoid corrupting hardware counters when moving VCAP filters
net: mscc: ocelot: restrict tc-trap actions to VCAP IS2 lookup 0
net: mscc: ocelot: fix VCAP IS2 filters matching on both lookups
net: mscc: ocelot: fix last VCAP IS1/IS2 filter persisting in hardware when deleted
net: mscc: ocelot: mark traps with a bool instead of keeping them in a list
s390/dasd: Use kzalloc instead of kmalloc/memset
s390/dasd: Fix read inconsistency for ESE DASD devices
s390/dasd: Fix read for ESE with blksize < 4k
s390/dasd: prevent double format of tracks for ESE devices
s390/dasd: fix data corruption for ESE devices
MAINTAINERS: add missing files for bonding definition
net: Fix features skip in for_each_netdev_feature()
selftests: add ping test with ping_group_range tuned
ping: fix address binding wrt vrf
net: phy: micrel: Pass .probe for KS8737
net: phy: micrel: Do not use kszphy_suspend/resume for KSZ8061
net: rds: use maybe_get_net() when acquiring refcount on TCP sockets
fsl_lpuart: Don't enable interrupts too early
tty: n_gsm: fix invalid gsmtty_write_room() result
tty: n_gsm: fix mux activation issues in gsm_config()
tty: n_gsm: fix buffer over-read in gsm_dlci_data()
serial: 8250_mtk: Fix register address for XON/XOFF character
serial: 8250_mtk: Make sure to select the right FEATURE_SEL
serial: 8250_mtk: Fix UART_EFR register address
tty/serial: digicolor: fix possible null-ptr-deref in digicolor_uart_probe()
usb: gadget: uvc: allow for application to cleanly shutdown
usb: typec: tcpci: Don't skip cleanup in .remove() on error
usb: cdc-wdm: fix reading stuck on device close
btrfs: sysfs: export the balance paused state of exclusive operation
btrfs: fix assertion failure when logging directory key range item
btrfs: zoned: activate block group properly on unlimited active zone device
btrfs: zoned: move non-changing condition check out of the loop
btrfs: force v2 space cache usage for subpage mount
cgroup/cpuset: Remove cpus_allowed/mems_allowed setup in cpuset_init_smp()
USB: serial: qcserial: add support for Sierra Wireless EM7590
gpio: visconti: Fix fwnode of GPIO IRQ
USB: serial: option: add Fibocom MA510 modem
USB: serial: option: add Fibocom L610 modem
USB: serial: pl2303: add device id for HP LM930 Display
genirq: Synchronize interrupt thread startup
MAINTAINERS: update the GPIO git tree entry
NFC: netlink: fix sleep in atomic bug when firmware download timeout
mm/readahead: Fix readahead with large folios
block: Do not call folio_next() on an unreferenced folio
selftests: ocelot: tc_flower_chains: specify conform-exceed action for policer
tcp: drop the hash_32() part from the index calculation
tcp: increase source port perturb table to 2^16
tcp: dynamically allocate the perturb table used by source ports
tcp: add small random increments to the source port
tcp: resalt the secret every 10 seconds
tcp: use different parts of the port_offset for index and offset
secure_seq: use the 64 bits of the siphash for port offset calculation
wireguard: selftests: set panic_on_warn=1 from cmdline
wireguard: selftests: bump package deps
wireguard: selftests: restore support for ccache
wireguard: selftests: use newer toolchains to fill out architectures
wireguard: selftests: limit parallelism to $(nproc) tests at once
wireguard: selftests: make routing loop test non-fatal
x86/fpu: Prevent FPU state corruption
RDMA/rxe: Change mcg_lock to a _bh lock
RDMA/rxe: Do not call dev_mc_add/del() under a spinlock
RDMA/siw: Fix a condition race issue in MPA request processing
ANDROID: GKI: Disable KUnit built-in testing
dt-bindings: pci: apple,pcie: Drop max-link-speed from example
dt-bindings: Drop redundant 'maxItems/minItems' in if/then schemas
dt-bindings: pinctrl: Allow values for drive-push-pull and drive-open-drain
MAINTAINERS: Update Josh Poimboeuf's email address
drm/amd/display: Avoid reading audio pattern past AUDIO_CHANNELS_COUNT
drm/amdgpu: do not use passthrough mode in Xen dom0
iommu: Make sysfs robust for non-API groups
powerpc/vdso: Fix incorrect CFI in gettimeofday.S
powerpc/pseries/vas: Use QoS credits from the userspace
mmc: sdhci-msm: Reset GCC_SDCC_BCR register for SDHC
mmc: sunxi-mmc: Fix DMA descriptors allocated above 32 bits
mac80211: Reset MBSSID parameters upon connection
cfg80211: retrieve S1G operating channel number
nl80211: validate S1G channel width
mac80211: fix rx reordering with non explicit / psmp ack policy
iommu/dart: Add missing module owner to ops structure
drm/bridge: ite-it6505: add missing Kconfig option select
net/mlx5: Fix matching on inner TTC
net/mlx5: Avoid double clear or set of sync reset requested
net/mlx5: Fix deadlock in sync reset flow
net/mlx5e: Fix trust state reset in reload
net/mlx5e: Avoid checking offload capability in post_parse action
net/mlx5e: CT: Fix queued up restore put() executing after relevant ft release
net/mlx5e: TC, fix decap fallback to uplink when int port not supported
net/mlx5e: TC, Fix ct_clear overwriting ct action metadata
net/mlx5e: Lag, Don't skip fib events on current dst
net/mlx5e: Lag, Fix fib_info pointer assignment
net/mlx5e: Lag, Fix use-after-free in fib event handler
net/mlx5e: Fix the calling of update_buffer_lossy() API
net/mlx5e: Don't match double-vlan packets if cvlan is not set
net/mlx5: Fix slab-out-of-bounds while reading resource dump menu
net/mlx5e: Fix wrong source vport matching on tunnel rule
bnxt_en: Fix unnecessary dropping of RX packets
bnxt_en: Initiallize bp->ptp_lock first before using it
bnxt_en: Fix possible bnxt_open() failure caused by wrong RFS flag
smsc911x: allow using IRQ0
net: sfp: Add tx-fault workaround for Huawei MA5671A SFP ONT
PCI: qcom: Remove ddrss_sf_tbu clock from SC8180X
interconnect: Restore sync state by ignoring ipa-virt in provider count
fbdev: Make fb_release() return -ENODEV if fbdev was unregistered
hwmon: (tmp401) Add OF device ID table
KVM: s390: vsie/gmap: reduce gmap_rmap overhead
kvm: x86/cpuid: Only provide CPUID leaf 0xA if host has architectural PMU
KVM: x86/svm: Account for family 17h event renumberings in amd_pmc_perf_hw_id
net: rds: acquire refcount on TCP sockets
KVM: x86/mmu: Use atomic XCHG to write TDP MMU SPTEs with volatile bits
KVM: x86/mmu: Move shadow-present check out of spte_has_volatile_bits()
KVM: x86/mmu: Don't treat fully writable SPTEs as volatile (modulo A/D)
selftests/net: so_txtime: usage(): fix documentation of default clock
selftests/net: so_txtime: fix parsing of start time stamp on 32 bit systems
selftests: mirror_gre_bridge_1q: Avoid changing PVID while interface is operational
net: emaclite: Add error handling for of_address_to_resource()
net: emaclite: Don't advertise 1000BASE-T and do auto negotiation
scsi: qla2xxx: Fix missed DMA unmap for aborted commands
scsi: scsi_dh_alua: Properly handle the ALUA transitioning state
KVM: s390: Fix lockdep issue in vm memop
Revert "block: release rq qos structures for queue without disk"
RDMA/irdma: Fix possible crash due to NULL netdev in notifier
RDMA/irdma: Reduce iWARP QP destroy time
RDMA/irdma: Flush iWARP QP if modified to ERR from RTR state
io_uring: assign non-fixed early for async work
gpio: mvebu: drop pwm base assignment
gpiolib: of: fix bounds check for 'gpio-reserved-ranges'
net: dsa: b53: convert to phylink_pcs
pci_irq_vector() can't be used in atomic context any longer. This conflicts with the usage of this function in nic_mbx_intr_handler().
nfc: nfcmrvl: main: reorder destructive operations in nfcmrvl_nci_unregister_dev to avoid bugs
nfc: replace improper check device_is_registered() in netlink related functions
net: stmmac: disable Split Header (SPH) for Intel platforms
mm: Fix PASID use-after-free issue
mld: respect RCU rules in ip6_mc_source() and ip6_mc_msfilter()
net: igmp: respect RCU rules in ip_mc_source() and ip_mc_msfilter()
rxrpc: Enable IPv6 checksums on transport socket
net: cpsw: add missing of_node_put() in cpsw_probe_dt()
net: stmmac: dwmac-sun8i: add missing of_node_put() in sun8i_dwmac_register_mdio_mux()
net: dsa: mt7530: add missing of_node_put() in mt7530_setup()
net: dsa: ksz9477: port mirror sniffing limited to one port
hinic: fix bug of wq out of bound access
net: mdio: Fix ENOMEM return value in BCM6368 mux bus controller
net: ethernet: mediatek: add missing of_node_put() in mtk_sgmii_init()
selftests/net/forwarding: add missing tests to Makefile
selftests/net: add missing tests to Makefile
Revert "SUNRPC: attempt AF_LOCAL connect on setup"
selftests/seccomp: Don't call read() on TTY from background pgrp
SUNRPC: Ensure gss-proxy connects on setup
ipmi:ipmi_ipmb: Fix null-ptr-deref in ipmi_unregister_smi()
ipmi: When handling send message responses, don't process the message
RISC-V: relocate DTB if it's outside memory region
MIPS: Fix CP0 counter erratum detection for R4k CPUs
SUNRPC: Ensure timely close of disconnected AF_LOCAL sockets
can: grcan: only use the NAPI poll budget for RX
can: grcan: grcan_probe(): fix broken system id check for errata workaround needs
can: grcan: use ofdev->dev when allocating DMA memory
can: grcan: grcan_close(): fix deadlock
can: isotp: remove re-binding of bound socket
mm/hwpoison: use pr_err() instead of dump_page() in get_any_page()
mm/huge_memory: do not overkill when splitting huge_zero_page
Revert "mm/memory-failure.c: skip huge_zero_page in memory_failure()"
ath11k: reduce the wait time of 11d scan and hw scan while add interface
timekeeping: Mark NMI safe time accessors as notrace
SUNRPC: Don't leak sockets in xs_local_connect()
iommu/dart: check return value after calling platform_get_resource()
iommu/vt-d: Drop stop marker messages
iommu/vt-d: Calculate mask for non-aligned flushes
btrfs: skip compression property for anything other than files and dirs
btrfs: do not BUG_ON() on failure to update inode when setting xattr
btrfs: always log symlinks in full mode
btrfs: do not allow compression on nodatacow files
btrfs: export a helper for compression hard check
dt-bindings: leds-mt6360: Drop redundant 'unevaluatedProperties'
dt-bindings: ufs: cdns,ufshc: Add power-domains
drm/msm/dp: remove fail safe mode related code
ASoC: SOF: Fix NULL pointer exception in sof_pci_probe callback
hwmon: (pmbus) delta-ahe50dc-fan: work around hardware quirk
s390: disable -Warray-bounds
ASoC: ops: Validate input values in snd_soc_put_volsw_range()
mmc: core: Set HS clock speed before sending HS CMD13
NFSv4: Don't invalidate inode attributes on delegation return
hwmon: (pmbus) disable PEC if not enabled
ASoC: dmaengine: Restore NULL prepare_slave_config() callback
ASoC: atmel: mchp-pdmc: set prepare_slave_config
ASoC: max98090: Generate notifications on changes for custom control
ASoC: max98090: Reject invalid values in custom control put()
ALSA: fireworks: fix wrong return count shorter than expected by 4 bytes
ALSA: hda/realtek: Add quirk for Yoga Duet 7 13ITL6 speakers
firewire: core: extend card->lock in fw_core_handle_bus_reset
firewire: remove check of list iterator against head past the loop body
firewire: fix potential uaf in outbound_phy_packet_callback()
MAINTAINERS: update iwlwifi driver maintainer
iwlwifi: iwl-dbg: Use del_timer_sync() before freeing
SUNRPC release the transport of a relocated task with an assigned transport
ASoC: rt9120: Correct the reg 0x09 size to one byte
iommu: arm-smmu: disable large page mappings for Nvidia arm-smmu
ALSA: hda/realtek: Enable mute/micmute LEDs support for HP Laptops
ALSA: hda/realtek: Fix mute led issue on thinkpad with cs35l41 s-codec
MAINTAINERS: Update email address for John Stultz
futex: MAINTAINERS, .mailmap: Update André's email address
ASoC: meson: axg-card: Fix nonatomic links
ASoC: meson: axg-tdm-interface: Fix formatters in trigger"
ASoC: soc-ops: fix error handling
ASoC: meson: Fix event generation for G12A tohdmi mux
ASoC: meson: Fix event generation for AUI CODEC mux
ASoC: meson: Fix event generation for AUI ACODEC mux
ASoC: da7219: Fix change notifications for tone generator frequency
RDMA/rxe: Recheck the MR in when generating a READ reply
ASoC: simple-card-utils: fix sysclk shutdown
iommu/arm-smmu-v3: Fix size calculation in arm_smmu_mm_invalidate_range()
RDMA/irdma: Fix deadlock in irdma_cleanup_cm_core()
ASoC: wm8958: Fix change notifications for DSP controls
hwmon: (f71882fg) Fix negative temperature
batman-adv: Don't skb_split skbuffs with frag_list
dt-bindings: hwmon: ti,tmp421: Fix type for 'ti,n-factor'
RDMA/rxe: Fix "Replace mr by rkey in responder resources"
PCI/PM: Avoid putting Elo i2 PCIe Ports in D3cold
hwmon: (adt7470) Fix warning on module removal
hwmon: (asus_wmi_sensors) Fix CROSSHAIR VI HERO name
hwmon: (xdpe12284) Fix build warning seen if CONFIG_SENSORS_XDPE122_REGULATOR is disabled
Conflicts:
Documentation/devicetree/bindings
Documentation/devicetree/bindings/clock/imx8m-clock.yaml
Documentation/devicetree/bindings/display/bridge/renesas,lvds.yaml
Documentation/devicetree/bindings/display/renesas,du.yaml
Documentation/devicetree/bindings/hwmon/ti,tmp421.yaml
Documentation/devicetree/bindings/iio/adc/st,stm32-adc.yaml
Documentation/devicetree/bindings/leds/leds-mt6360.yaml
Documentation/devicetree/bindings/mmc/nvidia,tegra20-sdhci.yaml
Documentation/devicetree/bindings/mtd/gpmi-nand.yaml
Documentation/devicetree/bindings/net/can/bosch,c_can.yaml
Documentation/devicetree/bindings/pci/apple,pcie.yaml
Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml
Documentation/devicetree/bindings/pinctrl/pincfg-node.yaml
Documentation/devicetree/bindings/rtc/allwinner,sun6i-a31-rtc.yaml
Documentation/devicetree/bindings/serial/samsung_uart.yaml
Documentation/devicetree/bindings/sound/allwinner,sun4i-a10-i2s.yaml
Documentation/devicetree/bindings/sound/ti,j721e-cpb-audio.yaml
Documentation/devicetree/bindings/thermal/rcar-gen3-thermal.yaml
Documentation/devicetree/bindings/ufs/cdns,ufshc.yaml
Upstream-Build:ks_qcom-android-mainline-keystone-qcom-release@8638194 SKQ4.220524.002
Change-Id: Ia65bb7e08d4a99f031ff2a75f261d9be7aa336e5
Signed-off-by: jianzhou <quic_jianzhou@quicinc.com>
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to turn
them off. Some of them might be surprising. This makes objtool
tricky to use, and prevents porting individual features to other
arches.
- The config dependencies are too coarse-grained. Objtool enablement is
tied to CONFIG_STACK_VALIDATION, but it has several other features
independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is really
a subset of "orc", so it has all the same options. The subcmd model
has never really worked for objtool, as it only has a single purpose:
"do some combination of things on an object file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on 'readelf',
moving it away from 'nm', which doesn't handle multiple sections well,
which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt. object files
that don't have global symbols - which is rare but possible. Also fix a
bunch of symbol handling bugs found along the way.
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=ARdm
-----END PGP SIGNATURE-----
Merge tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull objtool updates from Ingo Molnar:
- Comprehensive interface overhaul:
=================================
Objtool's interface has some issues:
- Several features are done unconditionally, without any way to
turn them off. Some of them might be surprising. This makes
objtool tricky to use, and prevents porting individual features
to other arches.
- The config dependencies are too coarse-grained. Objtool
enablement is tied to CONFIG_STACK_VALIDATION, but it has several
other features independent of that.
- The objtool subcmds ("check" and "orc") are clumsy: "check" is
really a subset of "orc", so it has all the same options.
The subcmd model has never really worked for objtool, as it only
has a single purpose: "do some combination of things on an object
file".
- The '--lto' and '--vmlinux' options are nonsensical and have
surprising behavior.
Overhaul the interface:
- get rid of subcmds
- make all features individually selectable
- remove and/or clarify confusing/obsolete options
- update the documentation
- fix some bugs found along the way
- Fix x32 regression
- Fix Kbuild cleanup bugs
- Add scripts/objdump-func helper script to disassemble a single
function from an object file.
- Rewrite scripts/faddr2line to be section-aware, by basing it on
'readelf', moving it away from 'nm', which doesn't handle multiple
sections well, which can result in decoding failure.
- Rewrite & fix symbol handling - which had a number of bugs wrt.
object files that don't have global symbols - which is rare but
possible. Also fix a bunch of symbol handling bugs found along the
way.
* tag 'objtool-core-2022-05-23' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
objtool: Fix objtool regression on x32 systems
objtool: Fix symbol creation
scripts/faddr2line: Fix overlapping text section failures
scripts: Create objdump-func helper script
objtool: Remove libsubcmd.a when make clean
objtool: Remove inat-tables.c when make clean
objtool: Update documentation
objtool: Remove --lto and --vmlinux in favor of --link
objtool: Add HAVE_NOINSTR_VALIDATION
objtool: Rename "VMLINUX_VALIDATION" -> "NOINSTR_VALIDATION"
objtool: Make noinstr hacks optional
objtool: Make jump label hack optional
objtool: Make static call annotation optional
objtool: Make stack validation frame-pointer-specific
objtool: Add CONFIG_OBJTOOL
objtool: Extricate sls from stack validation
objtool: Rework ibt and extricate from stack validation
objtool: Make stack validation optional
objtool: Add option to print section addresses
objtool: Don't print parentheses in function addresses
...
Many architectures have similar install.sh scripts.
The first half is really generic; it verifies that the kernel image
and System.map exist, then executes ~/bin/${INSTALLKERNEL} or
/sbin/${INSTALLKERNEL} if available.
The second half is kind of arch-specific; it copies the kernel image
and System.map to the destination, but the code is slightly different.
Factor out the generic part into scripts/install.sh.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Fix typos in comments so that they make sense.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When developing new code/feature, CONFIG_WERROR is most
often turned off, especially for people using make W=12 to
get more warnings.
In such case, turning on -Werror temporarily would require
switching on CONFIG_WERROR in the configuration, building,
then switching off CONFIG_WERROR.
For this use case, this patch introduces a new 'e' modifier
to W= as a short hand for KCFLAGS+=-Werror" so that -Werror
got added to the kernel (built-in) and modules' CFLAGS.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The dependency
$(obj)/%.mod: $(obj)/%$(mod-prelink-ext).o
... exists because *.mod files previously contained undefined symbols,
which are computed from *.o files when CONFIG_TRIM_UNUSED_KSYMS=y.
Now that the undefined symbols are put into separate *.usyms files,
there is no reason to make *.mod depend on *.o files.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The *.mod files have two lines; the first line lists the member objects
of the module, and the second line, if CONFIG_TRIM_UNUSED_KSYMS=y, lists
the undefined symbols.
Currently, we generate *.mod after constructing composite modules,
otherwise, we cannot compute the second line. No prerequisite is
required to print the first line.
They are orthogonal. Splitting them into separate commands will ease
further cleanups.
This commit splits the list of undefined symbols out to *.usyms files.
Previously, the list of undefined symbols ended up with a very long
line, but now it has one symbol per line.
Use sed like we did before commit 7d32358be8 ("kbuild: avoid split
lines in .mod files").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Introduce support to compile devicetree sources out-of-tree. This is
useful so that dt-bindings and tools are provided Kbuild.
Conflicts:
Makefile
scripts/Makefile.lib
Change-Id: I3c15e43dd132b01d5ea7a4518aa91e809e83eb48
Signed-off-by: Elliot Berman <eberman@codeaurora.org>
Signed-off-by: Guru Das Srinagesh <quic_gurus@quicinc.com>
Now that stack validation is an optional feature of objtool, add
CONFIG_OBJTOOL and replace most usages of CONFIG_STACK_VALIDATION with
it.
CONFIG_STACK_VALIDATION can now be considered to be frame-pointer
specific. CONFIG_UNWINDER_ORC is already inherently valid for live
patching, so no need to "validate" it.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lkml.kernel.org/r/939bf3d85604b2a126412bf11af6e3bd3b872bcb.1650300597.git.jpoimboe@redhat.com
Steps on the way to 5.18-rc1
Resolves conflicts in:
Makefile
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ife7abfd4c100789add6803a80b29eb66663c1e0b
Allow additional arguments be passed to userprogs compilation.
Reproducible clang builds need to provide a sysroot and gcc path to
ensure the same toolchain is used across hosts. KCFLAGS is not currently
used for any user programs compilation, so add new USERCFLAGS and
USERLDFLAGS which serves similar purpose as HOSTCFLAGS/HOSTLDFLAGS.
Clang might detect GCC installation on hosts which have it installed
to a default location in /. With addition of these environment
variables, you can specify flags such as:
$ make USERCFLAGS=--sysroot=/path/to/sysroot
This can also be used to specify different sysroots such as musl or
bionic which may be installed on the host in paths that the compiler
may not search by default.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Change-Id: If4220e236b1c45b486d5a9701258c9b4cd21574b
(cherry picked from commit f67695c996https://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild.git kbuild)
Add HOSTPKG_CONFIG to allow tooling that builds the kernel to override
what pkg-config and parameters are used.
Signed-off-by: Chun-Tse Shao <ctshao@google.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This flag is specific to clang, where it is only used by the 32-bit and
64-bit ARM backends. In certain situations, the presence of this flag
will cause a warning, as shown by commit 6580c5c18f ("um: clang: Strip
out -mno-global-merge from USER_CFLAGS").
Since commit 61163efae0 ("kbuild: LLVMLinux: Add Kbuild support for
building kernel with Clang") that added this flag back in 2014, there
have been quite a few changes to the GlobalMerge pass in LLVM. Building
several different ARCH=arm and ARCH=arm64 configurations with LLVM 11
(minimum) and 15 (current main version) with this flag removed (i.e.,
with the default of '-mglobal-merge') reveals no modpost warnings, so it
is likely that the issue noted in the comment is no longer relevant due
to changes in LLVM or modpost, meaning this flag can be removed.
If any new warnings show up that are a result of the removal of this
flag, it can be added back under arch/arm{,64}/Makefile to avoid
warnings on other architectures.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: David Gow <davidgow@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
-----BEGIN PGP SIGNATURE-----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=84rW
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new environment variables, USERCFLAGS and USERLDFLAGS to allow
additional flags to be passed to user-space programs.
- Fix missing fflush() bugs in Kconfig and fixdep
- Fix a minor bug in the comment format of the .config file
- Make kallsyms ignore llvm's local labels, .L*
- Fix UAPI compile-test for cross-compiling with Clang
- Extend the LLVM= syntax to support LLVM=<suffix> form for using a
particular version of LLVm, and LLVM=<prefix> form for using custom
LLVM in a particular directory path.
- Clean up Makefiles
* tag 'kbuild-v5.18-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: Make $(LLVM) more flexible
kbuild: add --target to correctly cross-compile UAPI headers with Clang
fixdep: use fflush() and ferror() to ensure successful write to files
arch: syscalls: simplify uapi/kapi directory creation
usr/include: replace extra-y with always-y
certs: simplify empty certs creation in certs/Makefile
certs: include certs/signing_key.x509 unconditionally
kallsyms: ignore all local labels prefixed by '.L'
kconfig: fix missing '# end of' for empty menu
kconfig: add fflush() before ferror() check
kbuild: replace $(if A,A,B) with $(or A,B)
kbuild: Add environment variables for userprogs flags
kbuild: unify cmd_copy and cmd_shipped
The LLVM make variable allows a developer to quickly switch between the
GNU and LLVM tools. However, it does not handle versioned binaries, such
as the ones shipped by Debian, as LLVM=1 just defines the tool variables
with the unversioned binaries.
There was some discussion during the review of the patch that introduces
LLVM=1 around versioned binaries, ultimately coming to the conclusion
that developers can just add the folder that contains the unversioned
binaries to their PATH, as Debian's versioned suffixed binaries are
really just symlinks to the unversioned binaries in /usr/lib/llvm-#/bin:
$ realpath /usr/bin/clang-14
/usr/lib/llvm-14/bin/clang
$ PATH=/usr/lib/llvm-14/bin:$PATH make ... LLVM=1
However, that can be cumbersome to developers who are constantly testing
series with different toolchains and versions. It is simple enough to
support these versioned binaries directly in the Kbuild system by
allowing the developer to specify the version suffix with LLVM=, which
is shorter than the above suggestion:
$ make ... LLVM=-14
It does not change the meaning of LLVM=1 (which will continue to use
unversioned binaries) and it does not add too much additional complexity
to the existing $(LLVM) code, while allowing developers to quickly test
their series with different versions of the whole LLVM suite of tools.
Some developers may build LLVM from source but not add the binaries to
their PATH, as they may not want to use that toolchain systemwide.
Support those developers by allowing them to supply the directory that
the LLVM tools are available in, as it is no more complex to support
than the version suffix change above.
$ make ... LLVM=/path/to/llvm/
Update and reorder the documentation to reflect these new additions.
At the same time, notate that LLVM=0 is not the same as just omitting it
altogether, which has confused people in the past.
Link: https://lore.kernel.org/r/20200317215515.226917-1-ndesaulniers@google.com/
Link: https://lore.kernel.org/r/20220224151322.072632223@infradead.org/
Suggested-by: Masahiro Yamada <masahiroy@kernel.org>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Enable -Warray-bounds globally
- Enable -Wzero-length-bounds globally
-----BEGIN PGP SIGNATURE-----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=yeZk
-----END PGP SIGNATURE-----
Merge tag 'array-bounds-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull array-bounds updates from Kees Cook:
"This enables -Warray-bounds and -Wzero-length-bounds, now that the
many bug fixes have landed all over the place in the kernel, and in
GCC itself[1].
A couple fixes[2] for known corner-case issues currently live in my
"pending-fixes" tree which I'm expecting to send next week if other
maintainers still haven't picked them up.
I'm also expecting we can enable -Wstringop-overflow next cycle, as
there are only a few stragglers[3], but it might even be possible for
this release"
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=99578
[2] https://git.kernel.org/pub/scm/linux/kernel/git/kees/linux.git/commit/?h=for-next/pending-fixes&id=2d253138910eec553fc706379914243d71de9b85
[3] https://github.com/KSPP/linux/issues/181
* tag 'array-bounds-v5.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: Enable -Wzero-length-bounds
Makefile: Enable -Warray-bounds
Linus pointed out the benefits of C99 some years ago, especially variable
declarations in loops [1]. At that time, we were not ready for the
migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum compiler
version, there is nothing to prevent us from going to -std=gnu99, or even
straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first.
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
-----BEGIN PGP SIGNATURE-----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=KMDk
-----END PGP SIGNATURE-----
Merge tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild update for C11 language base from Masahiro Yamada:
"Kbuild -std=gnu11 updates for v5.18
Linus pointed out the benefits of C99 some years ago, especially
variable declarations in loops [1]. At that time, we were not ready
for the migration due to old compilers.
Recently, Jakob Koschel reported a bug in list_for_each_entry(), which
leaks the invalid pointer out of the loop [2]. In the discussion, we
agreed that the time had come. Now that GCC 5.1 is the minimum
compiler version, there is nothing to prevent us from going to
-std=gnu99, or even straight to -std=gnu11.
Discussions for a better list iterator implementation are ongoing, but
this patch set must land first"
[1] https://lore.kernel.org/all/CAHk-=wgr12JkKmRd21qh-se-_Gs69kbPgR9x4C+Es-yJV2GLkA@mail.gmail.com/
[2] https://lore.kernel.org/lkml/86C4CE7D-6D93-456B-AA82-F8ADEACA40B7@gmail.com/
* tag 'kbuild-gnu11-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Kbuild: use -std=gnu11 for KBUILD_USERCFLAGS
Kbuild: move to -std=gnu11
Kbuild: use -Wdeclaration-after-statement
Kbuild: add -Wno-shift-negative-value where -Wextra is used
As we change the C language standard for the kernel from gnu89 to
gnu11, it makes sense to also update the version for user space
compilation.
Some users have older native compilers than what they use for
kernel builds, so I considered using gnu99 as the default version
for wider compatibility with gcc-4.6 and earlier.
However, testing with older compilers showed that we already require
HOSTCC version 5.1 as well because a lot of host tools include
linux/compiler.h that uses __has_attribute():
CC tools/objtool/exec-cmd.o
In file included from tools/include/linux/compiler_types.h:36:0,
from tools/include/linux/compiler.h:5,
from exec-cmd.c:2:
tools/include/linux/compiler-gcc.h:19:5: error: "__has_attribute" is not defined [-Werror=undef]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
During a patch discussion, Linus brought up the option of changing
the C standard version from gnu89 to gnu99, which allows using variable
declaration inside of a for() loop. While the C99, C11 and later standards
introduce many other features, most of these are already available in
gnu89 as GNU extensions as well.
An earlier attempt to do this when gcc-5 started defaulting to
-std=gnu11 failed because at the time that caused warnings about
designated initializers with older compilers. Now that gcc-5.1 is
the minimum compiler version used for building kernels, that is no
longer a concern. Similarly, the behavior of 'inline' functions changes
between gnu89 using gnu_inline behavior and gnu11 using standard c99+
behavior, but this was taken care of by defining 'inline' to include
__attribute__((gnu_inline)) in order to allow building with clang a
while ago.
Nathan Chancellor reported a new -Wdeclaration-after-statement
warning that appears in a system header on arm, this still needs a
workaround.
The differences between gnu99, gnu11, gnu1x and gnu17 are fairly
minimal and mainly impact warnings at the -Wpedantic level that the
kernel never enables. Between these, gnu11 is the newest version
that is supported by all supported compiler versions, though it is
only the default on gcc-5, while all other supported versions of
gcc or clang default to gnu1x/gnu17.
Link: https://lore.kernel.org/lkml/CAHk-=wiyCH7xeHcmiFJ-YgXUy2Jaj7pnkdKpcovt8fYbVFW3TA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1603
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Marco Elver <elver@google.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: David Sterba <dsterba@suse.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com>
Reviewed-by: Alex Shi <alexs@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Miguel Ojeda <ojeda@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The kernel is moving from using `-std=gnu89` to `-std=gnu11`, permitting
the use of additional C11 features such as for-loop initial declarations.
One contentious aspect of C99 is that it permits mixed declarations and
code, and for now at least, it seems preferable to enforce that
declarations must come first.
These warnings were already enabled in the kernel itself, but not
for KBUILD_USERCFLAGS or the compat VDSO on arch/arm64, which uses
a separate set of CFLAGS.
This patch fixes an existing violation in modpost.c, which is not
reported because of the missing flag in KBUILD_USERCFLAGS:
| scripts/mod/modpost.c: In function ‘match’:
| scripts/mod/modpost.c:837:3: warning: ISO C90 forbids mixed declarations and code [-Wdeclaration-after-statement]
| 837 | const char *endp = p + strlen(p) - 1;
| | ^~~~~
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
[arnd: don't add a duplicate flag to the default set, update changelog]
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # LLVM/Clang v13.0.0 (x86-64)
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Steps on the way to 5.17-rc1
Resolves conflicts in:
Makefile
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I75e0450ee51325de151ff75bf4c3615063743941
$(or ...) is available since GNU Make 3.81, and useful to shorten the
code in some places.
Covert as follows:
$(if A,A,B) --> $(or A,B)
This patch also converts:
$(if A, A, B) --> $(or A, B)
Strictly speaking, the latter is not an equivalent conversion because
GNU Make keeps spaces after commas; if A is not empty, $(if A, A, B)
expands to " A", while $(or A, B) expands to "A".
Anyway, preceding spaces are not significant in the code hunks I touched.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <nicolas@fjasle.eu>
Allow additional arguments be passed to userprogs compilation.
Reproducible clang builds need to provide a sysroot and gcc path to
ensure the same toolchain is used across hosts. KCFLAGS is not currently
used for any user programs compilation, so add new USERCFLAGS and
USERLDFLAGS which serves similar purpose as HOSTCFLAGS/HOSTLDFLAGS.
Clang might detect GCC installation on hosts which have it installed
to a default location in /. With addition of these environment
variables, you can specify flags such as:
$ make USERCFLAGS=--sysroot=/path/to/sysroot
This can also be used to specify different sysroots such as musl or
bionic which may be installed on the host in paths that the compiler
may not search by default.
Signed-off-by: Elliot Berman <quic_eberman@quicinc.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
With all known internal zero-length accesses fixed, it is possible to
enable -Wzero-length-bounds globally. Since this is included by default
in -Warray-bounds, we just need to stop disabling it.
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/lkml/CAKwvOd=bcs5W6eEDXGn5ROR2EuMiSp_2e6sLFxak=KK6yLWcvA@mail.gmail.com
With the recent fixes for flexible arrays and expanded FORTIFY_SOURCE
coverage, it is now possible to enable -Warray-bounds. Since both GCC
and Clang include -Warray-bounds in -Wall, adjust the Makefile to just
stop disabling it.
Note that this option can be conservative in its warnings (which is
done at casting time rather than access time), but this is reasonable
since the cast variables may be accessed out of a scope where the true
size of the original object can't be evaluated. These handful of false
positives (which are arguably bad casts and can be easily avoided),
are worth dealing with because of the many places where this option
has helped identify missed bounds checks and even accesses done against
cases where a NULL pointer could be reached.
https://github.com/KSPP/linux/issues/109https://github.com/KSPP/linux/issues/151
Cc: Arnd Bergmann <arnd@arndb.de>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Co-developed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
This reverts commit cd8c917a56.
Commit 129ab0d2d9 ("kbuild: do not quote string values in
include/config/auto.conf") provided the final solution.
Now reverting the temporary workaround.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
-----BEGIN PGP SIGNATURE-----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=8BQf
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add new kconfig target 'make mod2noconfig', which will be useful to
speed up the build and test iteration.
- Raise the minimum supported version of LLVM to 11.0.0
- Refactor certs/Makefile
- Change the format of include/config/auto.conf to stop double-quoting
string type CONFIG options.
- Fix ARCH=sh builds in dash
- Separate compression macros for general purposes (cmd_bzip2 etc.) and
the ones for decompressors (cmd_bzip2_with_size etc.)
- Misc Makefile cleanups
* tag 'kbuild-v5.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kbuild: add cmd_file_size
arch: decompressor: remove useless vmlinux.bin.all-y
kbuild: rename cmd_{bzip2,lzma,lzo,lz4,xzkern,zstd22}
kbuild: drop $(size_append) from cmd_zstd
sh: rename suffix-y to suffix_y
doc: kbuild: fix default in `imply` table
microblaze: use built-in function to get CPU_{MAJOR,MINOR,REV}
certs: move scripts/extract-cert to certs/
kbuild: do not quote string values in include/config/auto.conf
kbuild: do not include include/config/auto.conf from shell scripts
certs: simplify $(srctree)/ handling and remove config_filename macro
kbuild: stop using config_filename in scripts/Makefile.modsign
certs: remove misleading comments about GCC PR
certs: refactor file cleaning
certs: remove unneeded -I$(srctree) option for system_certificates.o
certs: unify duplicated cmd_extract_certs and improve the log
certs: use $< and $@ to simplify the key generation rule
kbuild: remove headers_check stub
kbuild: move headers_check.pl to usr/include/
certs: use if_changed to re-generate the key when the key type is changed
...
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed up.
- Add Straight Light Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
-----BEGIN PGP SIGNATURE-----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=R52z
-----END PGP SIGNATURE-----
Merge tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 core updates from Borislav Petkov:
- Get rid of all the .fixup sections because this generates
misleading/wrong stacktraces and confuse RELIABLE_STACKTRACE and
LIVEPATCH as the backtrace misses the function which is being fixed
up.
- Add Straight Line Speculation mitigation support which uses a new
compiler switch -mharden-sls= which sticks an INT3 after a RET or an
indirect branch in order to block speculation after them. Reportedly,
CPUs do speculate behind such insns.
- The usual set of cleanups and improvements
* tag 'x86_core_for_v5.17_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (32 commits)
x86/entry_32: Fix segment exceptions
objtool: Remove .fixup handling
x86: Remove .fixup section
x86/word-at-a-time: Remove .fixup usage
x86/usercopy: Remove .fixup usage
x86/usercopy_32: Simplify __copy_user_intel_nocache()
x86/sgx: Remove .fixup usage
x86/checksum_32: Remove .fixup usage
x86/vmx: Remove .fixup usage
x86/kvm: Remove .fixup usage
x86/segment: Remove .fixup usage
x86/fpu: Remove .fixup usage
x86/xen: Remove .fixup usage
x86/uaccess: Remove .fixup usage
x86/futex: Remove .fixup usage
x86/msr: Remove .fixup usage
x86/extable: Extend extable functionality
x86/entry_32: Remove .fixup usage
x86/entry_64: Remove .fixup usage
x86/copy_mc_64: Remove .fixup usage
...
Hi Linus,
Please, pull the following patch that globally enables
-Wcast-function-type.
We need to make sure new function cast mismatches are not
introduced in the kernel in order to avoid tripping CFI
checking.
Thanks!
--
Gustavo
-----BEGIN PGP SIGNATURE-----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=q0+c
-----END PGP SIGNATURE-----
Merge tag 'Wcast-function-type-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux
Pull cast-function-type warning addition from Gustavo A. R. Silva:
"This globally enables -Wcast-function-type.
We need to make sure new function cast mismatches are not introduced
in the kernel in order to avoid tripping CFI checking"
* tag 'Wcast-function-type-5.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gustavoars/linux:
Makefile: Enable -Wcast-function-type
The previous commit fixed up all shell scripts to not include
include/config/auto.conf.
Now that include/config/auto.conf is only included by Makefiles,
we can change it into a more Make-friendly form.
Previously, Kconfig output string values enclosed with double-quotes
(both in the .config and include/config/auto.conf):
CONFIG_X="foo bar"
Unlike shell, Make handles double-quotes (and single-quotes as well)
verbatim. We must rip them off when used.
There are some patterns:
[1] $(patsubst "%",%,$(CONFIG_X))
[2] $(CONFIG_X:"%"=%)
[3] $(subst ",,$(CONFIG_X))
[4] $(shell echo $(CONFIG_X))
These are not only ugly, but also fragile.
[1] and [2] do not work if the value contains spaces, like
CONFIG_X=" foo bar "
[3] does not work correctly if the value contains double-quotes like
CONFIG_X="foo\"bar"
[4] seems to work better, but has a cost of forking a process.
Anyway, quoted strings were always PITA for our Makefiles.
This commit changes Kconfig to stop quoting in include/config/auto.conf.
These are the string type symbols referenced in Makefiles or scripts:
ACPI_CUSTOM_DSDT_FILE
ARC_BUILTIN_DTB_NAME
ARC_TUNE_MCPU
BUILTIN_DTB_SOURCE
CC_IMPLICIT_FALLTHROUGH
CC_VERSION_TEXT
CFG80211_EXTRA_REGDB_KEYDIR
EXTRA_FIRMWARE
EXTRA_FIRMWARE_DIR
EXTRA_TARGETS
H8300_BUILTIN_DTB
INITRAMFS_SOURCE
LOCALVERSION
MODULE_SIG_HASH
MODULE_SIG_KEY
NDS32_BUILTIN_DTB
NIOS2_DTB_SOURCE
OPENRISC_BUILTIN_DTB
SOC_CANAAN_K210_DTB_SOURCE
SYSTEM_BLACKLIST_HASH_LIST
SYSTEM_REVOCATION_KEYS
SYSTEM_TRUSTED_KEYS
TARGET_CPU
UNUSED_KSYMS_WHITELIST
XILINX_MICROBLAZE0_FAMILY
XILINX_MICROBLAZE0_HW_VER
XTENSA_VARIANT_NAME
I checked them one by one, and fixed up the code where necessary.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
'make clean' removes files listed in 'targets'. It is redundant to
specify both 'targets' and 'clean-files'.
Move 'targets' assignments out of the ifeq-conditionals so
scripts/Makefile.clean can see them.
One effective change is that certs/certs/signing_key.x509 is now
deleted by 'make clean' instead of 'make mrproper. This certificate
is embedded in the kernel. It is not used in any way by external
module builds.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nicolas Schier <n.schier@avm.de>
Similar to external modules, the device tree should also be allowed to
be compiled using out-of-tree source. This would allow one to further
separate the core kernel from the vendor-specific device trees. To do
this, we just need to allow the user to set the "dtstree" and
"DTC_INCLUDE" build properties in the build environment.
To setup the external device tree, you can follow these steps:
1) Move the device tree to your out-of-tree project.
2) Move the dt-bindings to your out-of-tree project.
3) Configure your build environment to set the following variables:
dtstree=/path/to/device/tree
DTC_INCLUDE=/path/to/device/tree/dtc/include-prefixes
If you are using build.sh, then you can use DTS_EXT_DIR to define the
dtstree.
Bug: 210036798
Signed-off-by: Will McVicker <willmcvicker@google.com>
Change-Id: Ibf05544ee8250a68b882328817a267518ae478b5
- Revert schema checks on %.dtb targets. This was problematic for some
external build tools.
- A few DT binding example fixes
- Add back dropped 'enet-phy-lane-no-swap' Ethernet PHY property
- Drop erroneous if/then schema in nxp,imx7-mipi-csi2
- Add a quirk to fix some interrupt controllers use of 'interrupt-map'
-----BEGIN PGP SIGNATURE-----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=hYDY
-----END PGP SIGNATURE-----
Merge tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring:
- Revert schema checks on %.dtb targets. This was problematic for some
external build tools.
- A few DT binding example fixes
- Add back dropped 'enet-phy-lane-no-swap' Ethernet PHY property
- Drop erroneous if/then schema in nxp,imx7-mipi-csi2
- Add a quirk to fix some interrupt controllers use of 'interrupt-map'
* tag 'devicetree-fixes-for-5.16-2' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux:
Revert "kbuild: Enable DT schema checks for %.dtb targets"
dt-bindings: bq25980: Fixup the example
dt-bindings: input: gpio-keys: Fix interrupts in example
dt-bindings: net: Reintroduce PHY no lane swap binding
dt-bindings: media: nxp,imx7-mipi-csi2: Drop bad if/then schema
of/irq: Add a quirk for controllers with their own definition of interrupt-map
dt-bindings: iio: adc: exynos-adc: Fix node name in example
This reverts commit 828bab93de.
We should enable this again as all arches are now building successfully.
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I06034aa2487f039cd10fd3576c2d2416e599c1ac
This reverts commit 53182e81f4.
This added tool dependencies on various build systems using %.dtb
targets. Validation will need to be controlled by a kconfig or make
variable instead, but for now let's just revert it.
Signed-off-by: Rob Herring <robh@kernel.org>
Currently, RETPOLINE*_CFLAGS are defined in the top-level Makefile
but only x86 makes use of them. Move them there. If ever another
architecture finds the need, it can be reconsidered.
[ bp: Massage a bit. ]
Suggested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lkml.kernel.org/r/20211119165630.219152765@infradead.org
Steps on the way to 5.16-rc5
Fixes merge issues with:
Makefile
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ic9ef5ec61a70c93a8ad05a49f1fb3e3543635402
Andreas reported that a specific build environment for an external
module, being a bit broken, does pass CC_IMPLICIT_FALLTHROUGH quoted as
argument to gcc, causing an error
gcc-11: error: "-Wimplicit-fallthrough=5": linker input file not found: No such file or directory
Until this is more generally fixed as outlined in [1], by fixing
scripts/link-vmlinux.sh, scripts/gen_autoksyms.sh, etc to not directly
include the include/config/auto.conf, and in a second step, change
Kconfig to generate the auto.conf without "", workaround the issue by
explicitly unquoting CC_IMPLICIT_FALLTHROUGH.
Reported-by: Andreas Beckmann <anbe@debian.org>
Link: https://bugs.debian.org/1001083
Link: https://lore.kernel.org/linux-kbuild/CAK7LNAR-VXwHFEJqCcrFDZj+_4+Xd6oynbj_0eS8N504_ydmyw@mail.gmail.com/ [1]
Signed-off-by: Salvatore Bonaccorso <carnil@debian.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Works around build breakage. Once we find the proper fix, we should
revert this.
Bug: 205893923
Test: builds
Change-Id: I8b4ab0eb5895232b4e0f3f7639984e4093b77e75
Signed-off-by: Yifan Hong <elsk@google.com>
In order to make sure new function cast mismatches are not introduced
in the kernel (to avoid tripping CFI checking), the kernel should be
globally built with -Wcast-function-type.
Link: https://github.com/KSPP/linux/issues/20
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Add Kconfig support for -Wimplicit-fallthrough for both GCC and Clang.
The compiler option is under configuration CC_IMPLICIT_FALLTHROUGH,
which is enabled by default.
Special thanks to Nathan Chancellor who fixed the Clang bug[1][2]. This
bugfix only appears in Clang 14.0.0, so older versions still contain
the bug and -Wimplicit-fallthrough won't be enabled for them, for now.
This concludes a long journey and now we are finally getting rid
of the unintentional fallthrough bug-class in the kernel, entirely. :)
Link: 9ed4a94d64 [1]
Link: https://bugs.llvm.org/show_bug.cgi?id=51094 [2]
Link: https://github.com/KSPP/linux/issues/115
Link: https://github.com/ClangBuiltLinux/linux/issues/236
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Co-developed-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
This reverts commit 53182e81f4.
Right now it breaks the Android kernel build as libyaml needs to be
added to it, and an updated version of DTC also needs to be added to the
build system.
Until then, revert this change as we don't "need" to validate the yaml
at this point in time as we "trust" the files are good for now.
Cc: Rob Herring <robh@kernel.org>
Fixes: 53182e81f4 ("kbuild: Enable DT schema checks for %.dtb targets")
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I72acd7d9a2475137c53d910d997e0c9b8f4fe905
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which generate
a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
-----BEGIN PGP SIGNATURE-----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=ATFN
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Remove the global -isystem compiler flag, which was made possible by
the introduction of <linux/stdarg.h>
- Improve the Kconfig help to print the location in the top menu level
- Fix "FORCE prerequisite is missing" build warning for sparc
- Add new build targets, tarzst-pkg and perf-tarzst-src-pkg, which
generate a zstd-compressed tarball
- Prevent gen_init_cpio tool from generating a corrupted cpio when
KBUILD_BUILD_TIMESTAMP is set to 2106-02-07 or later
- Misc cleanups
* tag 'kbuild-v5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (28 commits)
kbuild: use more subdir- for visiting subdirectories while cleaning
sh: remove meaningless archclean line
initramfs: Check timestamp to prevent broken cpio archive
kbuild: split DEBUG_CFLAGS out to scripts/Makefile.debug
gen_init_cpio: add static const qualifiers
kbuild: Add make tarzst-pkg build option
scripts: update the comments of kallsyms support
sparc: Add missing "FORCE" target when using if_changed
kconfig: refactor conf_touch_dep()
kconfig: refactor conf_write_dep()
kconfig: refactor conf_write_autoconf()
kconfig: add conf_get_autoheader_name()
kconfig: move sym_escape_string_value() to confdata.c
kconfig: refactor listnewconfig code
kconfig: refactor conf_write_symbol()
kconfig: refactor conf_write_heading()
kconfig: remove 'const' from the return type of sym_escape_string_value()
kconfig: rename a variable in the lexer to a clearer name
kconfig: narrow the scope of variables in the lexer
kconfig: Create links to main menu items in search
...
Merge misc updates from Andrew Morton:
"257 patches.
Subsystems affected by this patch series: scripts, ocfs2, vfs, and
mm (slab-generic, slab, slub, kconfig, dax, kasan, debug, pagecache,
gup, swap, memcg, pagemap, mprotect, mremap, iomap, tracing, vmalloc,
pagealloc, memory-failure, hugetlb, userfaultfd, vmscan, tools,
memblock, oom-kill, hugetlbfs, migration, thp, readahead, nommu, ksm,
vmstat, madvise, memory-hotplug, rmap, zsmalloc, highmem, zram,
cleanups, kfence, and damon)"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>: (257 commits)
mm/damon: remove return value from before_terminate callback
mm/damon: fix a few spelling mistakes in comments and a pr_debug message
mm/damon: simplify stop mechanism
Docs/admin-guide/mm/pagemap: wordsmith page flags descriptions
Docs/admin-guide/mm/damon/start: simplify the content
Docs/admin-guide/mm/damon/start: fix a wrong link
Docs/admin-guide/mm/damon/start: fix wrong example commands
mm/damon/dbgfs: add adaptive_targets list check before enable monitor_on
mm/damon: remove unnecessary variable initialization
Documentation/admin-guide/mm/damon: add a document for DAMON_RECLAIM
mm/damon: introduce DAMON-based Reclamation (DAMON_RECLAIM)
selftests/damon: support watermarks
mm/damon/dbgfs: support watermarks
mm/damon/schemes: activate schemes based on a watermarks mechanism
tools/selftests/damon: update for regions prioritization of schemes
mm/damon/dbgfs: support prioritization weights
mm/damon/vaddr,paddr: support pageout prioritization
mm/damon/schemes: prioritize regions within the quotas
mm/damon/selftests: support schemes quotas
mm/damon/dbgfs: support quotas of schemes
...
GCC and Clang can use the "alloc_size" attribute to better inform the
results of __builtin_object_size() (for compile-time constant values).
Clang can additionally use alloc_size to inform the results of
__builtin_dynamic_object_size() (for run-time values).
Because GCC sees the frequent use of struct_size() as an allocator size
argument, and notices it can return SIZE_MAX (the overflow indication),
it complains about these call sites overflowing (since SIZE_MAX is
greater than the default -Walloc-size-larger-than=PTRDIFF_MAX). This
isn't helpful since we already know a SIZE_MAX will be caught at
run-time (this was an intentional design). To deal with this, we must
disable this check as it is both a false positive and redundant. (Clang
does not have this warning option.)
Unfortunately, just checking the -Wno-alloc-size-larger-than is not
sufficient to make the __alloc_size attribute behave correctly under
older GCC versions. The attribute itself must be disabled in those
situations too, as there appears to be no way to reliably silence the
SIZE_MAX constant expression cases for GCC versions less than 9.1:
In file included from ./include/linux/resource_ext.h:11,
from ./include/linux/pci.h:40,
from drivers/net/ethernet/intel/ixgbe/ixgbe.h:9,
from drivers/net/ethernet/intel/ixgbe/ixgbe_lib.c:4:
In function 'kmalloc_node',
inlined from 'ixgbe_alloc_q_vector' at ./include/linux/slab.h:743:9:
./include/linux/slab.h:618:9: error: argument 1 value '18446744073709551615' exceeds maximum object size 9223372036854775807 [-Werror=alloc-size-larger-than=]
return __kmalloc_node(size, flags, node);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
./include/linux/slab.h: In function 'ixgbe_alloc_q_vector':
./include/linux/slab.h:455:7: note: in a call to allocation function '__kmalloc_node' declared here
void *__kmalloc_node(size_t size, gfp_t flags, int node) __assume_slab_alignment __malloc;
^~~~~~~~~~~~~~
Specifically:
'-Wno-alloc-size-larger-than' is not correctly handled by GCC < 9.1
https://godbolt.org/z/hqsfG7q84 (doesn't disable)
https://godbolt.org/z/P9jdrPTYh (doesn't admit to not knowing about option)
https://godbolt.org/z/465TPMWKb (only warns when other warnings appear)
'-Walloc-size-larger-than=18446744073709551615' is not handled by GCC < 8.2
https://godbolt.org/z/73hh1EPxz (ignores numeric value)
Since anything marked with __alloc_size would also qualify for marking
with __malloc, just include __malloc along with it to avoid redundant
markings. (Suggested by Linus Torvalds.)
Finally, make sure checkpatch.pl doesn't get confused about finding the
__alloc_size attribute on functions. (Thanks to Joe Perches.)
Link: https://lkml.kernel.org/r/20210930222704.2631604-3-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Tested-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Whitcroft <apw@canonical.com>
Cc: Christoph Lameter <cl@linux.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Dwaipayan Ray <dwaipayanray1@gmail.com>
Cc: Joe Perches <joe@perches.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: Lukas Bulwahn <lukas.bulwahn@gmail.com>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: Tejun Heo <tj@kernel.org>
Cc: Vlastimil Babka <vbabka@suse.cz>
Cc: Alexandre Bounine <alex.bou9@gmail.com>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Ira Weiny <ira.weiny@intel.com>
Cc: Jing Xiangfeng <jingxiangfeng@huawei.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: kernel test robot <lkp@intel.com>
Cc: Matt Porter <mporter@kernel.crashing.org>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Steps on the way to 5.16-rc1
Fixes up merge issues with:
drivers/scsi/ufs/ufshcd-crypto.c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: Ibb8331eb6115ef0e16f94fc326070b91de6798e4
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP ESP8089,
tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and boards,
and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
-----BEGIN PGP SIGNATURE-----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=dQa6
-----END PGP SIGNATURE-----
Merge tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree updates from Rob Herring:
- Convert /reserved-memory bindings to schemas
- Convert a bunch of NFC bindings to schemas
- Convert bindings to schema: Xilinx USB, Freescale DDR controller, Arm
CCI-400, UBlox Neo-6M, 1-Wire GPIO, MSI controller, ASpeed LPC, OMAP
and Inside-Secure HWRNG, register-bit-led, OV5640, Silead GSL1680,
Elan ekth3000, Marvell bluetooth, TI wlcore, TI bluetooth, ESP
ESP8089, tlm,trusted-foundations, Microchip cap11xx, Ralink SoCs and
boards, and TI sysc
- New binding schemas for: msi-ranges, Aspeed UART routing controller,
palmbus, Xylon LogiCVC display controller, Mediatek's MT7621 SDRAM
memory controller, and Apple M1 PCIe host
- Run schema checks for %.dtb targets
- Improve build time when using DT_SCHEMA_FILES
- Improve error message when dtschema is not found
- Various doc reference fixes in MAINTAINERS
- Convert architectures to common CPU h/w ID parsing function
of_get_cpu_hwid().
- Allow for empty NUMA node IDs which may be hotplugged
- Cleanup of __fdt_scan_reserved_mem()
- Constify device_node parameters
- Update dtc to upstream v1.6.1-19-g0a3a9d3449c8. Adds new checks
'node_name_vs_property_name' and 'interrupt_map'.
- Enable dtc 'unit_address_format' warning by default
- Fix unittest EXPECT text for gpio hog errors
* tag 'devicetree-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: (97 commits)
dt-bindings: net: ti,bluetooth: Document default max-speed
dt-bindings: pci: rcar-pci-ep: Document r8a7795
dt-bindings: net: qcom,ipa: IPA does support up to two iommus
of/fdt: Remove of_scan_flat_dt() usage for __fdt_scan_reserved_mem()
of: unittest: document intentional interrupt-map provider build warning
of: unittest: fix EXPECT text for gpio hog errors
of/unittest: Disable new dtc node_name_vs_property_name and interrupt_map warnings
scripts/dtc: Update to upstream version v1.6.1-19-g0a3a9d3449c8
dt-bindings: arm: firmware: tlm,trusted-foundations: Convert txt bindings to yaml
dt-bindings: display: tilcd: Fix endpoint addressing in example
dt-bindings: input: microchip,cap11xx: Convert txt bindings to yaml
dt-bindings: ufs: exynos-ufs: add exynosautov9 compatible
dt-bindings: ufs: exynos-ufs: add io-coherency property
dt-bindings: mips: convert Ralink SoCs and boards to schema
dt-bindings: display: xilinx: Fix example with psgtr
dt-bindings: net: nfc: nxp,pn544: Convert txt bindings to yaml
dt-bindings: Add a help message when dtschema tools are missing
dt-bindings: bus: ti-sysc: Update to use yaml binding
dt-bindings: sram: Allow numbers in sram region node name
dt-bindings: display: Document the Xylon LogiCVC display controller
...
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space
and avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace
to work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction,
by exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec
offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP
buffer pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x
and Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we
can add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements
to CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=srde
-----END PGP SIGNATURE-----
Merge tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Remove socket skb caches
- Add a SO_RESERVE_MEM socket op to forward allocate buffer space and
avoid memory accounting overhead on each message sent
- Introduce managed neighbor entries - added by control plane and
resolved by the kernel for use in acceleration paths (BPF / XDP
right now, HW offload users will benefit as well)
- Make neighbor eviction on link down controllable by userspace to
work around WiFi networks with bad roaming implementations
- vrf: Rework interaction with netfilter/conntrack
- fq_codel: implement L4S style ce_threshold_ect1 marking
- sch: Eliminate unnecessary RCU waits in mini_qdisc_pair_swap()
BPF:
- Add support for new btf kind BTF_KIND_TAG, arbitrary type tagging
as implemented in LLVM14
- Introduce bpf_get_branch_snapshot() to capture Last Branch Records
- Implement variadic trace_printk helper
- Add a new Bloomfilter map type
- Track <8-byte scalar spill and refill
- Access hw timestamp through BPF's __sk_buff
- Disallow unprivileged BPF by default
- Document BPF licensing
Netfilter:
- Introduce egress hook for looking at raw outgoing packets
- Allow matching on and modifying inner headers / payload data
- Add NFT_META_IFTYPE to match on the interface type either from
ingress or egress
Protocols:
- Multi-Path TCP:
- increase default max additional subflows to 2
- rework forward memory allocation
- add getsockopts: MPTCP_INFO, MPTCP_TCPINFO, MPTCP_SUBFLOW_ADDRS
- MCTP flow support allowing lower layer drivers to configure msg
muxing as needed
- Automatic Multicast Tunneling (AMT) driver based on RFC7450
- HSR support the redbox supervision frames (IEC-62439-3:2018)
- Support for the ip6ip6 encapsulation of IOAM
- Netlink interface for CAN-FD's Transmitter Delay Compensation
- Support SMC-Rv2 eliminating the current same-subnet restriction, by
exploiting the UDP encapsulation feature of RoCE adapters
- TLS: add SM4 GCM/CCM crypto support
- Bluetooth: initial support for link quality and audio/codec offload
Driver APIs:
- Add a batched interface for RX buffer allocation in AF_XDP buffer
pool
- ethtool: Add ability to control transceiver modules' power mode
- phy: Introduce supported interfaces bitmap to express MAC
capabilities and simplify PHY code
- Drop rtnl_lock from DSA .port_fdb_{add,del} callbacks
New drivers:
- WiFi driver for Realtek 8852AE 802.11ax devices (rtw89)
- Ethernet driver for ASIX AX88796C SPI device (x88796c)
Drivers:
- Broadcom PHYs
- support 72165, 7712 16nm PHYs
- support IDDQ-SR for additional power savings
- PHY support for QCA8081, QCA9561 PHYs
- NXP DPAA2: support for IRQ coalescing
- NXP Ethernet (enetc): support for software TCP segmentation
- Renesas Ethernet (ravb) - support DMAC and EMAC blocks of
Gigabit-capable IP found on RZ/G2L SoC
- Intel 100G Ethernet
- support for eswitch offload of TC/OvS flow API, including
offload of GRE, VxLAN, Geneve tunneling
- support application device queues - ability to assign Rx and Tx
queues to application threads
- PTP and PPS (pulse-per-second) extensions
- Broadcom Ethernet (bnxt)
- devlink health reporting and device reload extensions
- Mellanox Ethernet (mlx5)
- offload macvlan interfaces
- support HW offload of TC rules involving OVS internal ports
- support HW-GRO and header/data split
- support application device queues
- Marvell OcteonTx2:
- add XDP support for PF
- add PTP support for VF
- Qualcomm Ethernet switch (qca8k): support for QCA8328
- Realtek Ethernet DSA switch (rtl8366rb)
- support bridge offload
- support STP, fast aging, disabling address learning
- support for Realtek RTL8365MB-VC, a 4+1 port 10M/100M/1GE switch
- Mellanox Ethernet/IB switch (mlxsw)
- multi-level qdisc hierarchy offload (e.g. RED, prio and shaping)
- offload root TBF qdisc as port shaper
- support multiple routing interface MAC address prefixes
- support for IP-in-IP with IPv6 underlay
- MediaTek WiFi (mt76)
- mt7921 - ASPM, 6GHz, SDIO and testmode support
- mt7915 - LED and TWT support
- Qualcomm WiFi (ath11k)
- include channel rx and tx time in survey dump statistics
- support for 80P80 and 160 MHz bandwidths
- support channel 2 in 6 GHz band
- spectral scan support for QCN9074
- support for rx decapsulation offload (data frames in 802.3
format)
- Qualcomm phone SoC WiFi (wcn36xx)
- enable Idle Mode Power Save (IMPS) to reduce power consumption
during idle
- Bluetooth driver support for MediaTek MT7922 and MT7921
- Enable support for AOSP Bluetooth extension in Qualcomm WCN399x and
Realtek 8822C/8852A
- Microsoft vNIC driver (mana)
- support hibernation and kexec
- Google vNIC driver (gve)
- support for jumbo frames
- implement Rx page reuse
Refactor:
- Make all writes to netdev->dev_addr go thru helpers, so that we can
add this address to the address rbtree and handle the updates
- Various TCP cleanups and optimizations including improvements to
CPU cache use
- Simplify the gnet_stats, Qdisc stats' handling and remove
qdisc->running sequence counter
- Driver changes and API updates to address devlink locking
deficiencies"
* tag 'net-next-for-5.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (2122 commits)
Revert "net: avoid double accounting for pure zerocopy skbs"
selftests: net: add arp_ndisc_evict_nocarrier
net: ndisc: introduce ndisc_evict_nocarrier sysctl parameter
net: arp: introduce arp_evict_nocarrier sysctl parameter
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
net: vmxnet3: remove multiple false checks in vmxnet3_ethtool.c
net: avoid double accounting for pure zerocopy skbs
tcp: rename sk_wmem_free_skb
netdevsim: fix uninit value in nsim_drv_configure_vfs()
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
...
Alexei Starovoitov says:
====================
pull-request: bpf-next 2021-11-01
We've added 181 non-merge commits during the last 28 day(s) which contain
a total of 280 files changed, 11791 insertions(+), 5879 deletions(-).
The main changes are:
1) Fix bpf verifier propagation of 64-bit bounds, from Alexei.
2) Parallelize bpf test_progs, from Yucong and Andrii.
3) Deprecate various libbpf apis including af_xdp, from Andrii, Hengqi, Magnus.
4) Improve bpf selftests on s390, from Ilya.
5) bloomfilter bpf map type, from Joanne.
6) Big improvements to JIT tests especially on Mips, from Johan.
7) Support kernel module function calls from bpf, from Kumar.
8) Support typeless and weak ksym in light skeleton, from Kumar.
9) Disallow unprivileged bpf by default, from Pawan.
10) BTF_KIND_DECL_TAG support, from Yonghong.
11) Various bpftool cleanups, from Quentin.
* https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf-next: (181 commits)
libbpf: Deprecate AF_XDP support
kbuild: Unify options for BTF generation for vmlinux and modules
selftests/bpf: Add a testcase for 64-bit bounds propagation issue.
bpf: Fix propagation of signed bounds from 64-bit min/max into 32-bit.
bpf: Fix propagation of bounds from 64-bit min/max into 32-bit and var_off.
selftests/bpf: Fix also no-alu32 strobemeta selftest
bpf: Add missing map_delete_elem method to bloom filter map
selftests/bpf: Add bloom map success test for userspace calls
bpf: Add alignment padding for "map_extra" + consolidate holes
bpf: Bloom filter map naming fixups
selftests/bpf: Add test cases for struct_ops prog
bpf: Add dummy BPF STRUCT_OPS for test purpose
bpf: Factor out helpers for ctx access checking
bpf: Factor out a helper to prepare trampoline for struct_ops prog
selftests, bpf: Fix broken riscv build
riscv, libbpf: Add RISC-V (RV64) support to bpf_tracing.h
tools, build: Add RISC-V to HOSTARCH parsing
riscv, bpf: Increase the maximum number of iterations
selftests, bpf: Add one test for sockmap with strparser
selftests, bpf: Fix test_txmsg_ingress_parser error
...
====================
Link: https://lore.kernel.org/r/20211102013123.9005-1-alexei.starovoitov@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Using new PAHOLE_FLAGS variable to pass extra arguments to
pahole for both vmlinux and modules BTF data generation.
Adding new scripts/pahole-flags.sh script that detect and
prints pahole options.
[ fixed issues found by kernel test robot ]
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211029125729.70002-1-jolsa@kernel.org
-----BEGIN PGP SIGNATURE-----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=QWC+
-----END PGP SIGNATURE-----
Merge tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block
Pull block updates from Jens Axboe:
- mq-deadline accounting improvements (Bart)
- blk-wbt timer fix (Andrea)
- Untangle the block layer includes (Christoph)
- Rework the poll support to be bio based, which will enable adding
support for polling for bio based drivers (Christoph)
- Block layer core support for multi-actuator drives (Damien)
- blk-crypto improvements (Eric)
- Batched tag allocation support (me)
- Request completion batching support (me)
- Plugging improvements (me)
- Shared tag set improvements (John)
- Concurrent queue quiesce support (Ming)
- Cache bdev in ->private_data for block devices (Pavel)
- bdev dio improvements (Pavel)
- Block device invalidation and block size improvements (Xie)
- Various cleanups, fixes, and improvements (Christoph, Jackie,
Masahira, Tejun, Yu, Pavel, Zheng, me)
* tag 'for-5.16/block-2021-10-29' of git://git.kernel.dk/linux-block: (174 commits)
blk-mq-debugfs: Show active requests per queue for shared tags
block: improve readability of blk_mq_end_request_batch()
virtio-blk: Use blk_validate_block_size() to validate block size
loop: Use blk_validate_block_size() to validate block size
nbd: Use blk_validate_block_size() to validate block size
block: Add a helper to validate the block size
block: re-flow blk_mq_rq_ctx_init()
block: prefetch request to be initialized
block: pass in blk_mq_tags to blk_mq_rq_ctx_init()
block: add rq_flags to struct blk_mq_alloc_data
block: add async version of bio_set_polled
block: kill DIO_MULTI_BIO
block: kill unused polling bits in __blkdev_direct_IO()
block: avoid extra iter advance with async iocb
block: Add independent access ranges support
blk-mq: don't issue request directly in case that current is to be blocked
sbitmap: silence data race warning
blk-cgroup: synchronize blkg creation against policy deactivation
block: refactor bio_iov_bvec_set()
block: add single bio async direct IO helper
...
To slim down the top Makefile, split out the code block surrounded by
ifdef CONFIG_DEBUG_INFO ... endif.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesauniers@google.com>
Reviewed-by: Sedat Dilek <sedat.dilek@gmail.com>
Otherwise this upsets ABI monitoring as symbols are hidden and as such
do not get considered for ABI analysis.
Bug: 182194803
Bug: 203411090
Fixes: dc5723b02e ("kbuild: add support for Clang LTO")
Signed-off-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Matthias Maennich <maennich@google.com>
Change-Id: If6011ad739ecccd23a92cfa2f9fd43084f9a0b4f
Every object under block/ depends on CONFIG_BLOCK.
Move the guard to the top Makefile since there is no point to
descend into block/ if CONFIG_BLOCK=n.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Link: https://lore.kernel.org/r/20210927140000.866249-5-masahiroy@kernel.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
This reverts commit a2480b4d7e.
LibELF is now linkable from the Android Kernel build infra thanks to a
recent patch making hermetic the default for all builds.
Bug: 191637574
Fixes: a2480b4d7e ("Revert "kbuild: remove libelf checks from top Makefile"")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: I6eb8aced5766ea759780d27e82b34256971fdf50
Currently under Clang, CC_HAS_AUTO_VAR_INIT_ZERO requires an extra
-enable flag compared to CC_HAS_AUTO_VAR_INIT_PATTERN. GCC 12[1] will
not, and will happily ignore the Clang-specific flag. However, its
presence on the command-line is both cumbersome and confusing. Due to
GCC's tolerant behavior, though, we can continue to use a single Kconfig
cc-option test for the feature on both compilers, but then drop the
Clang-specific option in the Makefile.
In other words, this patch does not change anything other than making the
compiler command line shorter once GCC supports -ftrivial-auto-var-init=zero.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=a25e0b5e6ac8a77a71c229e0a7b744603365b0e9
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: llvm@lists.linux.dev
Fixes: dcb7c0b946 ("hardening: Clarify Kconfig text for auto-var-init")
Suggested-by: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/lkml/20210914102837.6172-1-will@kernel.org/
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Will Deacon <will@kernel.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
This reverts commit 3fe617ccaf.
Right now the android build system can not work properly for some of the
builds forcing this option on for them as they still have warnings.
So revert it for now, we will remove this later on, hopefully before
5.15-final is out, after all of the build warnings are cleaned up.
Bug: 199872592
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I7e6a0ebb76ab2876cb180214911c1c25b0904a23
Steps on the way to 5.15-rc1
Fixed up merge conflicts in:
scripts/Makefile.modfinal
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I3a916b7267fc2e4ed2f2bd308b9cff8ca9430660
It is possible to build a single dtb, but not with DT schema validation
enabled. Enable the schema validation to run for %.dtb and %.dtbo
targets. Anyone building a dtb for a specific platform *should* pay
attention to schema warnings.
This could be supported with a separate %.dt.yaml target instead.
However, the .dt.yaml format is considered an intermediate format and
could possibly go away at some point if schema checking is integrated
into dtc. Also, the plan is to enable the schema checks by default once
platforms are free of warnings, and this is a move in that direction.
Cc: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Cc: Tom Rini <trini@konsulko.com>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Rob Herring <robh@kernel.org>
Acked-by: Masahiro Yamada <masahiroy@kernel.org>
Link: https://lore.kernel.org/r/20210913145146.766080-1-robh@kernel.org
Merge patch series from Nick Desaulniers to update the minimum gcc
version to 5.1.
This is some of the left-overs from the merge window that I didn't want
to deal with yesterday, so it comes in after -rc1 but was sent before.
Gcc-4.9 support has been an annoyance for some time, and with -Werror I
had the choice of applying a fairly big patch from Kees Cook to remove a
fair number of initializer warnings (still leaving some), or this patch
series from Nick that just removes the source of the problem.
The initializer cleanups might still be worth it regardless, but
honestly, I preferred just tackling the problem with gcc-4.9 head-on.
We've been more aggressiuve about no longer having to care about
compilers that were released a long time ago, and I think it's been a
good thing.
I added a couple of patches on top to sort out a few left-overs now that
we no longer support gcc-4.x.
As noted by Arnd, as a result of this minimum compiler version upgrade
we can probably change our use of '--std=gnu89' to '--std=gnu11', and
finally start using local loop declarations etc. But this series does
_not_ yet do that.
Link: https://lore.kernel.org/all/20210909182525.372ee687@canb.auug.org.au/
Link: https://lore.kernel.org/lkml/CAK7LNASs6dvU6D3jL2GG3jW58fXfaj6VNOe55NJnTB8UPuk2pA@mail.gmail.com/
Link: https://github.com/ClangBuiltLinux/linux/issues/1438
* emailed patches from Nick Desaulniers <ndesaulniers@google.com>:
Drop some straggling mentions of gcc-4.9 as being stale
compiler_attributes.h: drop __has_attribute() support for gcc4
vmlinux.lds.h: remove old check for GCC 4.9
compiler-gcc.h: drop checks for older GCC versions
Makefile: drop GCC < 5 -fno-var-tracking-assignments workaround
arm64: remove GCC version check for ARCH_SUPPORTS_INT128
powerpc: remove GCC version check for UPD_CONSTR
riscv: remove Kconfig check for GCC version for ARCH_RV64I
Kconfig.debug: drop GCC 5+ version check for DWARF5
mm/ksm: remove old GCC 4.9+ check
compiler.h: drop fallback overflow checkers
Documentation: raise minimum supported version of GCC to 5.1
Now that GCC 5.1 is the minimally supported version, we can drop this
workaround for older versions of GCC.
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When using gcc (SUSE Linux) 7.5.0 (on openSUSE 15.3), I see a build
warning:
kernel/trace/trace_osnoise.c: In function 'start_kthread':
kernel/trace/trace_osnoise.c:1461:8: warning: 'main' is usually a function [-Wmain]
void *main = osnoise_main;
^~~~
Quieten that warning by using "-Wno-main". It's OK to use "main" as a
declaration name in the kernel.
Build-tested on most ARCHes.
[ v2: only do it for gcc, since clang doesn't have that particular warning ]
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/lkml/20210813224131.25803-1-rdunlap@infradead.org/
Suggested-by: Steven Rostedt <rostedt@goodmis.org>
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Daniel Bristot de Oliveira <bristot@kernel.org>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Michal Marek <michal.lkml@markovi.net>
Cc: linux-kbuild@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
... but make it a config option so that broken environments can disable
it when required.
We really should always have a clean build, and will disable specific
over-eager warnings as required, if we can't fix them. But while I
fairly religiously enforce that in my own tree, it doesn't get enforced
by various build robots that don't necessarily report warnings.
So this just makes '-Werror' a default compiler flag, but allows people
to disable it for their configuration if they have some particular
issues.
Occasionally, new compiler versions end up enabling new warnings, and it
can take a while before we have them fixed (or the warnings disabled if
that is what it takes), so the config option allows for that situation.
Hopefully this will mean that I get fewer pull requests that have new
warnings that were not noticed by various automation we have in place.
Knock wood.
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
-----BEGIN PGP SIGNATURE-----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=lw3M
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Add -s option (strict mode) to merge_config.sh to make it fail when
any symbol is redefined.
- Show a warning if a different compiler is used for building external
modules.
- Infer --target from ARCH for CC=clang to let you cross-compile the
kernel without CROSS_COMPILE.
- Make the integrated assembler default (LLVM_IAS=1) for CC=clang.
- Add <linux/stdarg.h> to the kernel source instead of borrowing
<stdarg.h> from the compiler.
- Add Nick Desaulniers as a Kbuild reviewer.
- Drop stale cc-option tests.
- Fix the combination of CONFIG_TRIM_UNUSED_KSYMS and CONFIG_LTO_CLANG
to handle symbols in inline assembly.
- Show a warning if 'FORCE' is missing for if_changed rules.
- Various cleanups
* tag 'kbuild-v5.15' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (39 commits)
kbuild: redo fake deps at include/ksym/*.h
kbuild: clean up objtool_args slightly
modpost: get the *.mod file path more simply
checkkconfigsymbols.py: Fix the '--ignore' option
kbuild: merge vmlinux_link() between ARCH=um and other architectures
kbuild: do not remove 'linux' link in scripts/link-vmlinux.sh
kbuild: merge vmlinux_link() between the ordinary link and Clang LTO
kbuild: remove stale *.symversions
kbuild: remove unused quiet_cmd_update_lto_symversions
gen_compile_commands: extract compiler command from a series of commands
x86: remove cc-option-yn test for -mtune=
arc: replace cc-option-yn uses with cc-option
s390: replace cc-option-yn uses with cc-option
ia64: move core-y in arch/ia64/Makefile to arch/ia64/Kbuild
sparc: move the install rule to arch/sparc/Makefile
security: remove unneeded subdir-$(CONFIG_...)
kbuild: sh: remove unused install script
kbuild: Fix 'no symbols' warning when CONFIG_TRIM_UNUSD_KSYMS=y
kbuild: Switch to 'f' variants of integrated assembler flag
kbuild: Shuffle blank line to improve comment meaning
...
-Wunused-but-set-variable and -Wunused-const-variable are both disabled
for the same reason but there is a blank line between them and no blank
line between -Wno-unused-const-variable and the block.
Shuffle the new line so that it is clear that the comment applied to
both flags and the next block is separate from them.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Whenever a warning is disabled, it is helpful for future travelers to
understand why the warning is disabled and why it is acceptable to do
so. Add a comment for -Wno-gnu so that people understand why it is
disabled.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Turning on -Wformat does not reveal any instances of this warning across
several different builds so remove this line to keep the number of
disabled warnings as slim as possible.
This has been disabled since commit 61163efae0 ("kbuild: LLVMLinux:
Add Kbuild support for building kernel with Clang"), which does not
explain exactly why it was turned off but since it was so long ago in
terms of both the kernel and LLVM so it is possible that some bug got
fixed along the way.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
cc-option, cc-option-yn, and cc-disable-warning all invoke the compiler
during build time, and can slow down the build when these checks become
stale for our supported compilers, whose minimally supported versions
increases over time. See Documentation/process/changes.rst for the
current supported minimal versions (GCC 4.9+, clang 10.0.1+). Compiler
version support for these flags may be verified on godbolt.org.
The following flags are GCC only and supported since at least GCC 4.9.
Remove cc-option and cc-disable-warning tests.
* -fno-tree-loop-im
* -Wno-maybe-uninitialized
* -fno-reorder-blocks
* -fno-ipa-cp-clone
* -fno-partial-inlining
* -femit-struct-debug-baseonly
* -fno-inline-functions-called-once
* -fconserve-stack
The following flags are supported by all supported versions of GCC and
Clang. Remove their cc-option, cc-option-yn, and cc-disable-warning tests.
* -fno-delete-null-pointer-checks
* -fno-var-tracking
* -Wno-array-bounds
The following configs are made dependent on GCC, since they use GCC
specific flags.
* READABLE_ASM
* DEBUG_SECTION_MISMATCH
-mfentry was not supported by s390-linux-gnu-gcc until gcc-9+, add a
comment.
--param=allow-store-data-races=0 was renamed to -fno-allow-store-data-races
in the GCC 10 release; add a comment.
-Wmaybe-uninitialized (GCC specific) was being added for CONFIG_GCOV,
then again unconditionally; add it only once.
Also, base RETPOLINE_CFLAGS and RETPOLINE_VDSO_CFLAGS on CONFIC_CC_IS_*
then remove cc-option tests for Clang.
Link: https://github.com/ClangBuiltLinux/linux/issues/1436
Acked-by: Miguel Ojeda <ojeda@kernel.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro collisions,
fix PMD_ORDER collision, replace spaces with tabs
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQS86RI+GtKfB8BJu973ErUQojoPXwUCYTELwQAKCRD3ErUQojoP
Xy/uAQChkDVD15kBvj0PUt4hDpGq7ryfAsEfMnxlV2k4Ue6SKAEA3Smfd242lpPF
f89NNo6Y/ZhO+aWKfOLerXLfM6sB2QQ=
=cxvN
-----END PGP SIGNATURE-----
Merge tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux
Pull parisc architecture updates from Helge Deller:
- Fix a kernel crash when a signal is delivered to bad userspace stack
- Fix fall-through warnings in math-emu code
- Increase size of gcc stack frame check
- Switch coding from 'pci_' to 'dma_' API
- Make struct parisc_driver::remove() return void
- Some parisc related Makefile changes
- Minor cleanups, e.g. change to octal permissions, fix macro
collisions, fix PMD_ORDER collision, replace spaces with tabs
* tag 'for-5.15/parisc' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: math-emu: Fix fall-through warnings
parisc: fix crash with signals and alloca
parisc: Fix compile failure when building 64-bit kernel natively
parisc: ccio-dma.c: Added tab instead of spaces
parisc/parport_gsc: switch from 'pci_' to 'dma_' API
parisc: move core-y in arch/parisc/Makefile to arch/parisc/Kbuild
parisc: switch from 'pci_' to 'dma_' API
parisc: Make struct parisc_driver::remove() return void
parisc: remove unused arch/parisc/boot/install.sh and its phony target
parisc: Rename PMD_ORDER to PMD_TABLE_ORDER
parisc: math-emu: Avoid "fmt" macro collision
parisc: Increase size of gcc stack frame check
parisc: Replace symbolic permissions with octal permissions
- Expand lib/test_stackinit to include more initialization styles
- Improve Kconfig for CLang's auto-var-init feature
- Introduce support for GCC's zero-call-used-regs feature
-----BEGIN PGP SIGNATURE-----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=wFJL
-----END PGP SIGNATURE-----
Merge tag 'hardening-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull hardening updates from Kees Cook:
- Expand lib/test_stackinit to include more initialization styles
- Improve Kconfig for CLang's auto-var-init feature
- Introduce support for GCC's zero-call-used-regs feature
* tag 'hardening-v5.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
lib/test_stackinit: Add assigned initializers
lib/test_stackinit: Allow building stand-alone
lib/test_stackinit: Fix static initializer test
hardening: Clarify Kconfig text for auto-var-init
hardening: Introduce CONFIG_ZERO_CALL_USED_REGS
Commit 23243c1ace ("arch: use cross_compiling to check whether it is
a cross build or not") broke 64-bit parisc builds on 32-bit parisc
systems.
Helge mentioned:
- 64-bit parisc userspace is not supported yet [1]
- hppa gcc does not support "-m64" flag [2]
That means, parisc developers working on a 32-bit parisc machine need
to use hppa64-linux-gnu-gcc (cross compiler) for building the 64-bit
parisc kernel.
After the offending commit, gcc is used in such a case because
both $(SRCARCH) and $(SUBARCH) are 'parisc', hence cross_compiling is
unset.
A correct way is to introduce ARCH=parisc64 because building the 64-bit
parisc kernel on a 32-bit parisc system is not exactly a native build,
but rather a semi-cross build.
[1]: https://lore.kernel.org/linux-parisc/5dfd81eb-c8ca-b7f5-e80e-8632767c022d@gmx.de/#t
[2]: https://lore.kernel.org/linux-parisc/89515325-fc21-31da-d238-6f7a9abbf9a0@gmx.de/
Fixes: 23243c1ace ("arch: use cross_compiling to check whether it is a cross build or not")
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reported-by: Meelis Roos <mroos@linux.ee>
Tested-by: Meelis Roos <mroos@linux.ee>
Cc: <stable@vger.kernel.org> # v5.13+
Signed-off-by: Helge Deller <deller@gmx.de>
LLVM_IAS is the user interface to set the -(no-)integrated-as flag,
and it should be used only for that purpose.
LLVM_IAS is checked in some places to determine the assembler type,
but it is not precise.
For example,
$ make CC=gcc LLVM_IAS=1
... will use the GNU assembler (i.e. binutils) since LLVM_IAS=1 is
effective only when $(CC) is clang.
Of course, 'CC=gcc LLVM_IAS=1' is an odd combination, but the build
system can be more robust against such insane input.
Commit ba64beb174 ("kbuild: check the minimum assembler version in
Kconfig") introduced CONFIG_AS_IS_GNU/LLVM, which is more precise
because Kconfig checks the version string from the assembler in use.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
With some of the changes we'd like to make to CROSS_COMPILE, the initial
block of clang flag handling which controls things like the target triple,
whether or not to use the integrated assembler and how to find GAS,
and erroring on unknown warnings is becoming unwieldy. Move it into its
own file under scripts/.
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
It is always safe to use the same compiler for the kernel and external
modules, but in reality, some distributions such as Fedora release a
different version of GCC from the one used for building the kernel.
There was a long discussion about mixing different compilers [1].
I do not repeat it here, but at least, showing a heads up in that
case is better than nothing.
Linus suggested [2]:
And a warning might be more palatable even if different compiler
version work fine together. Just a heads up on "it looks like you
might be mixing compiler versions" is a valid note, and isn't
necessarily wrong. Even when they work well together, maybe you want
to have people at least _aware_ of it.
This commit shows a warning unless the compiler is exactly the same.
warning: the compiler differs from the one used to build the kernel
The kernel was built by: gcc (GCC) 11.1.1 20210531 (Red Hat 11.1.1-3)
You are using: gcc (GCC) 11.2.1 20210728 (Red Hat 11.2.1-1)
Check the difference, and if it is OK with you, please proceed at your
risk.
To avoid the locale issue as in commit bcbcf50f52 ("kbuild: fix
ld-version.sh to not be affected by locale"), pass LC_ALL=C to
"$(CC) --version".
[1] https://lore.kernel.org/linux-hardening/efe6b039a544da8215d5e54aa7c4b6d1986fc2b0.1611607264.git.jpoimboe@redhat.com/
[2] https://lore.kernel.org/lkml/CAHk-=wgjwhDy-y4mQh34L+2aF=n6BjzHdqAW2=8wri5x7O04pA@mail.gmail.com/
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As explained in commit 3204a7fb98 ("kbuild: prefix $(srctree)/ to some
included Makefiles"), I want to stop using --include-dir some day.
I already fixed up the top Makefile, but some arch Makefiles (mips, um,
x86) still include check-in Makefiles without $(srctree)/.
Fix them up so 'need-sub-make := 1' can go away for this case.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS working again
-----BEGIN PGP SIGNATURE-----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=M+2q
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Correct the Extended Regular Expressions in tools
- Adjust scripts/checkversion.pl for the current Kbuild
- Unset sub_make_done for 'make install' to make DKMS work again
* tag 'kbuild-fixes-v5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: cancel sub_make_done for the install target to fix DKMS
scripts: checkversion: modernize linux/version.h search strings
mips: Fix non-POSIX regexp
x86/tools/relocs: Fix non-POSIX regexp
- Fix NULL pointer dereference caused by an error path
- Give histogram calculation fields a size, otherwise it breaks synthetic
creation based on them.
- Reject strings being used for number calculations.
- Fix recordmcount.pl warning on llvm building RISC-V allmodconfig
- Fix the draw_functrace.py script to handle the new trace output
- Fix warning of smp_processor_id() in preemptible code
-----BEGIN PGP SIGNATURE-----
iIoEABYIADIWIQRRSw7ePDh/lE+zeZMp5XQQmuv6qgUCYQwR+xQccm9zdGVkdEBn
b29kbWlzLm9yZwAKCRAp5XQQmuv6qtHOAQD7gBn1cRK0T3Eolf5HRd14PLDVUZ1B
iMZuTJZzJUWLSAD/ec3ezcOafNlPKmG1ta8UxrWP5VzHOC5qTIAJYc1d5AA=
=7FNB
-----END PGP SIGNATURE-----
Merge tag 'trace-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace
Pull tracing fixes from Steven Rostedt:
"Various tracing fixes:
- Fix NULL pointer dereference caused by an error path
- Give histogram calculation fields a size, otherwise it breaks
synthetic creation based on them.
- Reject strings being used for number calculations.
- Fix recordmcount.pl warning on llvm building RISC-V allmodconfig
- Fix the draw_functrace.py script to handle the new trace output
- Fix warning of smp_processor_id() in preemptible code"
* tag 'trace-v5.14-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rostedt/linux-trace:
tracing: Quiet smp_processor_id() use in preemptable warning in hwlat
scripts/tracing: fix the bug that can't parse raw_trace_func
scripts/recordmcount.pl: Remove check_objcopy() and $can_use_local
tracing: Reject string operand in the histogram expression
tracing / histogram: Give calculation hist_fields a size
tracing: Fix NULL pointer dereference in start_creating
Since commit bcf637f54f ("kbuild: parse C= and M= before changing the
working directory"), external module builds invoked by DKMS fail because
M= option is not parsed.
I wanted to add 'unset sub_make_done' in install.sh but similar scripts,
arch/*/boot/install.sh, are duplicated, so I set sub_make_done empty in
the top Makefile.
Fixes: bcf637f54f ("kbuild: parse C= and M= before changing the working directory")
Reported-by: John S Gruber <johnsgruber@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: John S Gruber <johnsgruber@gmail.com>
When building ARCH=riscv allmodconfig with llvm-objcopy, the objcopy
version warning from this script appears:
WARNING: could not find objcopy version or version is less than 2.17.
Local function references are disabled.
The check_objcopy() function in scripts/recordmcount.pl is set up to
parse GNU objcopy's version string, not llvm-objcopy's, which triggers
the warning.
Commit 799c434154 ("kbuild: thin archives make default for all archs")
made binutils 2.20 mandatory and commit ba64beb174 ("kbuild: check the
minimum assembler version in Kconfig") enforces this at configuration
time so just remove check_objcopy() and $can_use_local instead, assuming
--globalize-symbol is always available.
llvm-objcopy has supported --globalize-symbol since LLVM 7.0.0 in 2018
and the minimum version for building the kernel with LLVM is 10.0.1 so
there is no issue introduced:
Link: ee5be798da
Link: https://lkml.kernel.org/r/20210802210307.3202472-1-nathan@kernel.org
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
When CONFIG_ZERO_CALL_USED_REGS is enabled, build the kernel with
"-fzero-call-used-regs=used-gpr" (in GCC 11). This option will zero any
caller-used register contents just before returning from a function,
ensuring that temporary values are not leaked beyond the function
boundary. This means that register contents are less likely to be
available for side channel attacks and information exposures.
Additionally this helps reduce the number of useful ROP gadgets in the
kernel image by about 20%:
$ ROPgadget.py --nosys --nojop --binary vmlinux.stock | tail -n1
Unique gadgets found: 337245
$ ROPgadget.py --nosys --nojop --binary vmlinux.zero-call-regs | tail -n1
Unique gadgets found: 267175
and more notably removes simple "write-what-where" gadgets:
$ ROPgadget.py --ropchain --binary vmlinux.stock | sed -n '/Step 1/,/Step 2/p'
- Step 1 -- Write-what-where gadgets
[+] Gadget found: 0xffffffff8102d76c mov qword ptr [rsi], rdx ; ret
[+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret
[+] Gadget found: 0xffffffff8104d7c8 pop rdx ; ret
[-] Can't find the 'xor rdx, rdx' gadget. Try with another 'mov [reg], reg'
[+] Gadget found: 0xffffffff814c2b4c mov qword ptr [rsi], rdi ; ret
[+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret
[+] Gadget found: 0xffffffff81001e51 pop rdi ; ret
[-] Can't find the 'xor rdi, rdi' gadget. Try with another 'mov [reg], reg'
[+] Gadget found: 0xffffffff81540d61 mov qword ptr [rsi], rdi ; pop rbx ; pop rbp ; ret
[+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret
[+] Gadget found: 0xffffffff81001e51 pop rdi ; ret
[-] Can't find the 'xor rdi, rdi' gadget. Try with another 'mov [reg], reg'
[+] Gadget found: 0xffffffff8105341e mov qword ptr [rsi], rax ; ret
[+] Gadget found: 0xffffffff81000cf5 pop rsi ; ret
[+] Gadget found: 0xffffffff81029a11 pop rax ; ret
[+] Gadget found: 0xffffffff811f1c3b xor rax, rax ; ret
- Step 2 -- Init syscall number gadgets
$ ROPgadget.py --ropchain --binary vmlinux.zero* | sed -n '/Step 1/,/Step 2/p'
- Step 1 -- Write-what-where gadgets
[-] Can't find the 'mov qword ptr [r64], r64' gadget
For an x86_64 parallel build tests, this has a less than 1% performance
impact, and grows the image size less than 1%:
$ size vmlinux.stock vmlinux.zero-call-regs
text data bss dec hex filename
22437676 8559152 14127340 45124168 2b08a48 vmlinux.stock
22453184 8563248 14110956 45127388 2b096dc vmlinux.zero-call-regs
Impact for other architectures may vary. For example, arm64 sees a 5.5%
image size growth, mainly due to needing to always clear x16 and x17:
https://lore.kernel.org/lkml/20210510134503.GA88495@C02TD0UTHF1T.local/
Signed-off-by: Kees Cook <keescook@chromium.org>
This reverts commit fc31d47a63.
This change was broken because UTS_RELEASE is used at runtime to find
files which are installed using KERNELRELEASE, so they need to match.
Bug: 137521202
Bug: 159842160
Bug: 194209519
Signed-off-by: Alistair Delva <adelva@google.com>
Change-Id: I668128a394919a59dd142a612ca2edbad51391d3
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
-----BEGIN PGP SIGNATURE-----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=7eEZ
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- Restore the original behavior of scripts/setlocalversion when
LOCALVERSION is set to empty.
- Show Kconfig prompts even for 'make -s'
- Fix the combination of COFNIG_LTO_CLANG=y and CONFIG_MODVERSIONS=y
for older GNU Make versions
* tag 'kbuild-fixes-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
Documentation: Fix intiramfs script name
Kbuild: lto: fix module versionings mismatch in GNU make 3.X
kbuild: do not suppress Kconfig prompts for silent build
scripts/setlocalversion: fix a bug when LOCALVERSION is empty
When a new CONFIG option is available, Kbuild shows a prompt to get
the user input.
$ make
[ snip ]
Core Scheduling for SMT (SCHED_CORE) [N/y/?] (NEW)
This is the only interactive place in the build process.
Commit 174a1dcc96 ("kbuild: sink stdout from cmd for silent build")
suppressed Kconfig prompts as well because syncconfig is invoked by
the 'cmd' macro. You cannot notice the fact that Kconfig is waiting
for the user input.
Use 'kecho' to show the equivalent short log without suppressing stdout
from sub-make.
Fixes: 174a1dcc96 ("kbuild: sink stdout from cmd for silent build")
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Tested-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
This reverts commit b7eb335e26.
It turns out that the problem with the clang -Wimplicit-fallthrough
warning is not about the kernel source code, but about clang itself, and
that the warning is unusable until clang fixes its broken ways.
In particular, when you enable this warning for clang, you not only get
warnings about implicit fallthroughs. You also get this:
warning: fallthrough annotation in unreachable code [-Wimplicit-fallthrough]
which is completely broken becasue it
(a) doesn't even tell you where the problem is (seriously: no line
numbers, no filename, no nothing).
(b) is fundamentally broken anyway, because there are perfectly valid
reasons to have a fallthrough statement even if it turns out that
it can perhaps not be reached.
In the kernel, an example of that second case is code in the scheduler:
switch (state) {
case cpuset:
if (IS_ENABLED(CONFIG_CPUSETS)) {
cpuset_cpus_allowed_fallback(p);
state = possible;
break;
}
fallthrough;
case possible:
where if CONFIG_CPUSETS is enabled you actually never hit the
fallthrough case at all. But that in no way makes the fallthrough
wrong.
So the warning is completely broken, and enabling it for clang is a very
bad idea.
In the meantime, we can keep the gcc option enabled, and make the gcc
build use
-Wimplicit-fallthrough=5
which means that we will at least continue to require a proper
fallthrough statement, and that gcc won't silently accept the magic
comment versions. Because gcc does this all correctly, and while the odd
"=5" part is kind of obscure, it's documented in [1]:
"-Wimplicit-fallthrough=5 doesn’t recognize any comments as
fallthrough comments, only attributes disable the warning"
so if clang ever fixes its bad behavior we can try enabling it there again.
Link: https://gcc.gnu.org/onlinedocs/gcc/Warning-Options.html [1]
Cc: Kees Cook <keescook@chromium.org>
Cc: Gustavo A. R. Silva <gustavoars@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With the recent fixes for fallthrough warnings, it is now possible to
enable -Wimplicit-fallthrough for Clang.
It's important to mention that since we have adopted the use of the
pseudo-keyword macro fallthrough; we also want to avoid having more
/* fall through */ comments being introduced. Notice that contrary
to GCC, Clang doesn't recognize any comments as implicit fall-through
markings when the -Wimplicit-fallthrough option is enabled. So, in
order to avoid having more comments being introduced, we have to use
the option -Wimplicit-fallthrough=5 for GCC, which similar to Clang,
will cause a warning in case a code comment is intended to be used
as a fall-through marking.
Co-developed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Gustavo A. R. Silva <gustavoars@kernel.org>
This reverts commit 0d989ac2c9.
Android kernel isn't ready for this change yet. Here's why:
There are a couple of different methods for linking the Android
kernel presently, hermetically and not. When *not* building
hermetically, the kernel is linked against locally installed
libraries (OpenSSL, LibElf, etc), usually installed by the distro.
Since these are usually fully fledged versions, they're usually
sufficient for any possible combination of build options.
However, when building hermetically (the intended default), the kernel
is linked against libraries contained in the `repo` controlled AOSP
repositories. This is not a problem for the vast majority of the
important builds, but x86 allmodconfig builds require more
functionality than is presently provided.
This revert changes the presence of LibElf to be voluntary again.
Meaning that we do not have to insist on the presence of a locally
installed instance.
Once OpenSSL (currently provided via BoringSSL) is upgraded to a more
featureful offering, we can consider re-inclusion of this patch.
Change-Id: I810139b034e1a6c2db4dc9fa8871279f5edf215d
Signed-off-by: Lee Jones <lee.jones@linaro.org>
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAmDon90VHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGWFUP/RGNwlGD/YV1xg0ZmM0/ynBzzOy2
3dcr3etJZpipQDeqnHy3jt0esgMVlbkTdrHvP+2hpNaeXFwjF1fDHjhur9m8ZkVD
efOA6nugOnNwhy2G3BvtCJv+Vhb+KZ0nNLB27z3Bl0LGP6LJdMRNAxFBJMv4k3aR
F3sABugwCpnT2/YtuprxRl2/3/CyLur5NjY24FD+ugON3JIWfl6ETbHeFmxr1JE4
mE+zaN5AwYuSuH9LpdRy85XVCcW/FFqP/DwOFllVvCCCNvvS0KWYSNHWfEsKdR75
hmAAaS/rpi2eaL0vp88sNhAtYnhMSf+uFu0fyfYeWZuJqMt4Xz5xZKAzDsifCdif
aQ6UEPDjiKABh9gpX26BMd2CXzkGR+L4qZ7iBPfO586Iy7opajrFX9kIj5U7ZtCl
wsPat/9+18xpVJOTe0sss3idId7Ft4cRoW5FQMEAW2EWJ9fXAG1yDxEREj1V5gFx
sMXtpmCoQag968qjfARvP08s3MB1P4Ij6tXcioGqHuEWeJLxOMK/KWyafQUg611d
0kSWNO0OMo+odBj6j/vM+MIIaPhgwtZnPgw2q4uHGMcemzQxaEvGW+G/5a5qEpTv
SKm8W24wXplNot4tuTGWq5/jANRJcMvVsyC48DYT81OZEOWrIc0kDV4v4qZToTxW
97jn1NKa2H6L0J1V
=Za8V
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
- Optimise SVE switching for CPUs with 128-bit implementations.
- Fix output format from SVE selftest.
- Add support for versions v1.2 and 1.3 of the SMC calling convention.
- Allow Pointer Authentication to be configured independently for
kernel and userspace.
- PMU driver cleanups for managing IRQ affinity and exposing event
attributes via sysfs.
- KASAN optimisations for both hardware tagging (MTE) and out-of-line
software tagging implementations.
- Relax frame record alignment requirements to facilitate 8-byte
alignment with KASAN and Clang.
- Cleanup of page-table definitions and removal of unused memory types.
- Reduction of ARCH_DMA_MINALIGN back to 64 bytes.
- Refactoring of our instruction decoding routines and addition of some
missing encodings.
- Move entry code moved into C and hardened against harmful compiler
instrumentation.
- Update booting requirements for the FEAT_HCX feature, added to v8.7
of the architecture.
- Fix resume from idle when pNMI is being used.
- Additional CPU sanity checks for MTE and preparatory changes for
systems where not all of the CPUs support 32-bit EL0.
- Update our kernel string routines to the latest Cortex Strings
implementation.
- Big cleanup of our cache maintenance routines, which were confusingly
named and inconsistent in their implementations.
- Tweak linker flags so that GDB can understand vmlinux when using RELR
relocations.
- Boot path cleanups to enable early initialisation of per-cpu
operations needed by KCSAN.
- Non-critical fixes and miscellaneous cleanup.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAmDUh1YQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNDaUCAC+2Jy2Yopd94uBPYajGybM0rqCUgE7b5n1
A7UzmQ6fia2hwqCPmxGG+sRabovwN7C1bKrUCc03RIbErIa7wum1edeyqmF/Aw44
DUDY1MAOSZaFmX8L62QCvxG1hfdLPtGmHMd1hdXvxYK7PCaigEFnzbLRWTtgE+Ok
JhdvNfsoeITJObHnvYPF3rV3NAbyYni9aNJ5AC/qb3dlf6XigEraXaMj29XHKfwc
+vmn+25oqFkLHyFeguqIoK+vUQAy/8TjFfjX83eN3LZknNhDJgWS1Iq1Nm+Vxt62
RvDUUecWJjAooCWgmil6pt0enI+q6E8LcX3A3cWWrM6psbxnYzkU
=I6KS
-----END PGP SIGNATURE-----
Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux
Pull arm64 updates from Will Deacon:
"There's a reasonable amount here and the juicy details are all below.
It's worth noting that the MTE/KASAN changes strayed outside of our
usual directories due to core mm changes and some associated changes
to some other architectures; Andrew asked for us to carry these [1]
rather that take them via the -mm tree.
Summary:
- Optimise SVE switching for CPUs with 128-bit implementations.
- Fix output format from SVE selftest.
- Add support for versions v1.2 and 1.3 of the SMC calling
convention.
- Allow Pointer Authentication to be configured independently for
kernel and userspace.
- PMU driver cleanups for managing IRQ affinity and exposing event
attributes via sysfs.
- KASAN optimisations for both hardware tagging (MTE) and out-of-line
software tagging implementations.
- Relax frame record alignment requirements to facilitate 8-byte
alignment with KASAN and Clang.
- Cleanup of page-table definitions and removal of unused memory
types.
- Reduction of ARCH_DMA_MINALIGN back to 64 bytes.
- Refactoring of our instruction decoding routines and addition of
some missing encodings.
- Move entry code moved into C and hardened against harmful compiler
instrumentation.
- Update booting requirements for the FEAT_HCX feature, added to v8.7
of the architecture.
- Fix resume from idle when pNMI is being used.
- Additional CPU sanity checks for MTE and preparatory changes for
systems where not all of the CPUs support 32-bit EL0.
- Update our kernel string routines to the latest Cortex Strings
implementation.
- Big cleanup of our cache maintenance routines, which were
confusingly named and inconsistent in their implementations.
- Tweak linker flags so that GDB can understand vmlinux when using
RELR relocations.
- Boot path cleanups to enable early initialisation of per-cpu
operations needed by KCSAN.
- Non-critical fixes and miscellaneous cleanup"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (150 commits)
arm64: tlb: fix the TTL value of tlb_get_level
arm64: Restrict undef hook for cpufeature registers
arm64/mm: Rename ARM64_SWAPPER_USES_SECTION_MAPS
arm64: insn: avoid circular include dependency
arm64: smp: Bump debugging information print down to KERN_DEBUG
drivers/perf: fix the missed ida_simple_remove() in ddr_perf_probe()
perf/arm-cmn: Fix invalid pointer when access dtc object sharing the same IRQ number
arm64: suspend: Use cpuidle context helpers in cpu_suspend()
PSCI: Use cpuidle context helpers in psci_cpu_suspend_enter()
arm64: Convert cpu_do_idle() to using cpuidle context helpers
arm64: Add cpuidle context save/restore helpers
arm64: head: fix code comments in set_cpu_boot_mode_flag
arm64: mm: drop unused __pa(__idmap_text_start)
arm64: mm: fix the count comments in compute_indices
arm64/mm: Fix ttbr0 values stored in struct thread_info for software-pan
arm64: mm: Pass original fault address to handle_mm_fault()
arm64/mm: Drop SECTION_[SHIFT|SIZE|MASK]
arm64/mm: Use CONT_PMD_SHIFT for ARM64_MEMSTART_SHIFT
arm64/mm: Drop SWAPPER_INIT_MAP_SIZE
arm64: Conditionally configure PTR_AUTH key of the kernel.
...
M= (or KBUILD_EXTMOD) generally expects a directory path without any
trailing slashes, like M=a/b/c.
If you add a trailing slash, like M=a/b/c/, you will get ugly build
logs (two slashes in a series), but it still works fine as long as it
is consistent between 'make modules' and 'make modules_install'.
The following commands correctly build and install the modules.
$ make M=a/b/c/ modules
$ sudo make M=a/b/c/ modules_install
Since commit ccae4cfa7b ("kbuild: refactor scripts/Makefile.modinst"),
a problem happens if you add a trailing slash only for modules_install.
$ make M=a/b/c modules
$ sudo make M=a/b/c/ modules_install
No module is installed in this case, Johannes Berg reported. [1]
Trim any trailing slashes from $(KBUILD_EXTMOD).
I used the 'dirname' command to remove all the trailing slashes in
case someone adds more slashes like M=a/b/c/////. The Make's built-in
function, $(dir ...) cannot take care of such a case.
[1]: https://lore.kernel.org/lkml/10cc8522b27a051e6a9c3e158a4c4b6414fd04a0.camel@sipsolutions.net/
Fixes: ccae4cfa7b ("kbuild: refactor scripts/Makefile.modinst")
Reported-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- The "-warn-stack-size" option under LTO has moved in Clang 13 (Tor Vic)
-----BEGIN PGP SIGNATURE-----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=ULcM
-----END PGP SIGNATURE-----
Merge tag 'clang-features-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull clang LTO fix from Kees Cook:
"It seems Clang has been scrubbing through the missing LTO IR flags for
Clang 13, and the last of these 'only with LTO' flags is fixed now.
I've asked that they please consider making these changes in a less
'break all the Clang kernel builds' kind of way in the future. :P
Summary:
- The '-warn-stack-size' option under LTO has moved in Clang 13 (Tor
Vic)"
* tag 'clang-features-v5.13-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
Makefile: lto: Pass -warn-stack-size only on LLD < 13.0.0
Since LLVM commit fc018eb, the '-warn-stack-size' flag has been dropped
[1], leading to the following error message when building with Clang-13
and LLD-13:
ld.lld: error: -plugin-opt=-: ld.lld: Unknown command line argument
'-warn-stack-size=2048'. Try: 'ld.lld --help'
ld.lld: Did you mean '--asan-stack=2048'?
In the same way as with commit 2398ce8015 ("x86, lto: Pass
-stack-alignment only on LLD < 13.0.0") , make '-warn-stack-size'
conditional on LLD < 13.0.0.
[1] https://reviews.llvm.org/D103928
Fixes: 24845dcb17 ("Makefile: LTO: have linker check -Wframe-larger-than")
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1377
Signed-off-by: Tor Vic <torvic9@mailbox.org>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/7631bab7-a8ab-f884-ab54-f4198976125c@mailbox.org
GDB produces the following warning when debugging kernels built with
CONFIG_RELR:
BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'
when loading a kernel built with CONFIG_RELR into GDB. It can also
prevent debugging symbols using such relocations.
Peter sugguests:
[That flag] means that lld will use dynamic tags and section type
numbers in the OS-specific range rather than the generic range. The
kernel itself doesn't care about these numbers; it determines the
location of the RELR section using symbols defined by a linker script.
Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Suggested-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210522012626.2811297-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
scripts/mkmakefile is simple enough to be merged in the Makefile.
Use $(call cmd,...) to show the log instead of doing it in the
shell script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
arch/$(SRCARCH)/Kbuild is useful for Makefile cleanups because you can
use the obj-y syntax.
Add an empty file if it is missing in arch/$(SRCARCH)/.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
-Wframe-larger-than= requires stack frame information, which the
frontend cannot provide. This diagnostic is emitted late during
compilation once stack frame size is available.
When building with LTO, the frontend simply lowers C to LLVM IR and does
not have stack frame information, so it cannot emit this diagnostic.
When the linker drives LTO, it restarts optimizations and lowers LLVM IR
to object code. At that point, it has stack frame information but
doesn't know to check for a specific max stack frame size.
I consider this a bug in LLVM that we need to fix. There are some
details we're working out related to LTO such as which value to use when
there are multiple different values specified per TU, or how to
propagate these to compiler synthesized routines properly, if at all.
Until it's fixed, ensure we don't miss these. At that point we can wrap
this in a compiler version guard or revert this based on the minimum
support version of Clang.
The error message is not generated during link:
LTO vmlinux.o
ld.lld: warning: stack size limit exceeded (8224) in foobarbaz
Cc: Sami Tolvanen <samitolvanen@google.com>
Reported-by: Candle Sun <candlesea@gmail.com>
Suggested-by: Fangrui Song <maskray@google.com>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20210312010942.1546679-1-ndesaulniers@google.com
I do not see a good reason why only the libelf development package must
be so carefully checked.
Kbuild generally does not check host tools or libraries.
For example, x86_64 defconfig fails to build with no libssl development
package installed.
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
| ^~~~~~~~~~~~~~~
To solve the build error, you need to install libssl-dev or openssl-devel
package, depending on your distribution.
'apt-file search', 'dnf provides', etc. is your frined to find a proper
package to install.
This commit removes all the libelf checks from the top Makefile.
If libelf is missing, objtool will fail to build in a similar pattern:
.../linux/tools/objtool/include/objtool/elf.h:10:10: fatal error: gelf.h: No such file or directory
10 | #include <gelf.h>
You need to install libelf-dev, libelf-devel, or elfutils-libelf-devel
to proceed.
Another remarkable change is, CONFIG_STACK_VALIDATION (without
CONFIG_UNWINDER_ORC) previously continued to build with a warning,
but now it will treat missing libelf as an error.
This is just a one-time installation, so it should not hurt to break
a build and make a user install the package.
BTW, the traditional way to handle such checks is autotool, but according
to [1], I do not expect the kernel build would have similar scripting
like './configure' does.
[1]: https://lore.kernel.org/lkml/CA+55aFzr2HTZVOuzpHYDwmtRJLsVzE-yqg2DHpHi_9ePsYp5ug@mail.gmail.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
The tools/ directory only exists in the kernel source tree, not in
external modules.
Do not expose the meaningless targets to external modules.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 09c60546f0 ("./Makefile: add debug option to enable
function aligned on 32 bytes") was introduced to help debugging
strange kernel performance changes caused by code alignment
change.
Recently we found 2 similar cases [1][2] caused by code-alignment
changes, which can only be identified by forcing 64 bytes aligned
for all functions.
Originally, 32 bytes was used mainly for not wasting too much
text space, but this option is only for debug anyway where text
space is not a big concern. So extend the alignment to 64 bytes
to cover more similar cases.
[1].https://lore.kernel.org/lkml/20210427090013.GG32408@xsang-OptiPlex-9020/
[2].https://lore.kernel.org/lkml/20210420030837.GB31773@xsang-OptiPlex-9020/
Signed-off-by: Feng Tang <feng.tang@intel.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts commit 537c1df08e.
Export this via HOSTLDFLAGS from build/ instead.
Bug: 116869922
Bug: 141693040
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: I6b990cf2ffea7845089f8dfde63bc3449092434a
This reverts commit f14e5bfb39.
Export this via HOSTLDFLAGS from build/ instead.
Bug: 65987925
Bug: 131098715
Bug: 135922132
Bug: 141693040
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Change-Id: I0a272560d2f34748f4b73d0aff15b058023e9f05
One giant leap, all the way up to 5.13-rc1
Also take the opportunity to re-align (a.k.a. fix a couple of previous
merge conflict fix-up issues) which occurred during this merge-window.
Fixes: 4797acfb9c ("Merge 16b3d0cf5b Merge tag 'sched-core-2021-04-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into android-mainline")
Fixes: 92f282f338 ("Merge 8ca5297e7e Merge tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild into android-mainline")
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Change-Id: Ie9389f595776e8f66bba6eaf0fa7a3587c6a5749
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config is
really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
-----BEGIN PGP SIGNATURE-----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=935P
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull more Kbuild updates from Masahiro Yamada:
- Convert sh and sparc to use generic shell scripts to generate the
syscall headers
- refactor .gitignore files
- Update kernel/config_data.gz only when the content of the .config
is really changed, which avoids the unneeded re-link of vmlinux
- move "remove stale files" workarounds to scripts/remove-stale-files
- suppress unused-but-set-variable warnings by default for Clang
as well
- fix locale setting LANG=C to LC_ALL=C
- improve 'make distclean'
- always keep intermediate objects from scripts/link-vmlinux.sh
- move IF_ENABLED out of <linux/kconfig.h> to make it self-contained
- misc cleanups
* tag 'kbuild-v5.13-2' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (25 commits)
linux/kconfig.h: replace IF_ENABLED() with PTR_IF() in <linux/kernel.h>
kbuild: Don't remove link-vmlinux temporary files on exit/signal
kbuild: remove the unneeded comments for external module builds
kbuild: make distclean remove tag files in sub-directories
kbuild: make distclean work against $(objtree) instead of $(srctree)
kbuild: refactor modname-multi by using suffix-search
kbuild: refactor fdtoverlay rule
kbuild: parameterize the .o part of suffix-search
arch: use cross_compiling to check whether it is a cross build or not
kbuild: remove ARCH=sh64 support from top Makefile
.gitignore: prefix local generated files with a slash
kbuild: replace LANG=C with LC_ALL=C
Makefile: Move -Wno-unused-but-set-variable out of GCC only block
kbuild: add a script to remove stale generated files
kbuild: update config_data.gz only when the content of .config is changed
.gitignore: ignore only top-level modules.builtin
.gitignore: move tags and TAGS close to other tag files
kernel/.gitgnore: remove stale timeconst.h and hz.bc
usr/include: refactor .gitignore
genksyms: fix stale comment
...
The supported targets for external modules are listed in the help target
a few lines below. Let's not have duplicated information in two places.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
'make tags' and friends create tag files in the top directory, but
people may manually create tag files in sub-directories.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This reverts the old commit [1], which seems questionable to me.
It claimed 'make distclean' could not remove editor backup files,
but I believe KBUILD_OUTPUT or O= was set.
When O= is given, Kbuild should always work against $(objtree).
If O= is not given, $(objtree) and $(srctree) are the same, therefore
$(srctree) is cleaned up.
[1]: https://git.kernel.org/pub/scm/linux/kernel/git/history/history.git/commit/?id=dd47df980c02eb33833b2690b033c34fba2fa80d
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Commit 37744feebc ("sh: remove sh5 support") removed the SUPERH64
support entirely.
Remove the left-over code from the top Makefile.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEEjSMCCC7+cjo3nszSa3kkZrA+cVoFAmCIuMgUHHpvaGFyQGxp
bnV4LmlibS5jb20ACgkQa3kkZrA+cVqCew//SHwZ3LuqZUyqX1lCeW0eUsJQmf9P
Rc++pK5+cigaYwg/LpLXBtIthOO91KJ+p4UrXIttlz6wRWqH5Enm/nQk3ngIIrWJ
g4HsU4LoXeE5V1QZgDdUWM+ViaNvZuzT8enaUt4VvelHTRMoAgeTu7/amjx01t9L
R8Qhmg2tBI5ehRgocNfEApNfaDyOcJhR14wAnGFhQH1pH2o0e+O+L5E6ke3Z2N0D
oa9LBkA2wZFlTXkYHAYBdZjPW0BXX55brIusLHhrvFC16Ad9IVwcxRvRwYy4v2IK
p8kO7EwGO4IkqsuL6FApgbW8/dTZXo3pD8YmplXhQdvAd9L/LshYhDePX7UsEp+O
CL3rFvNFzZKC5qTx0UXLqjcktosOLTTFkAzRMg5taTljbTWBp9ziI8X0nTgoThLH
fTs41Ol5v5veiq8JbZ1VixCoDJVOWtED/FuSZD41OyXJb7yGNpTnmvP6QJNIa1Yo
vWsxSWmEX62xT85CzYLBR1Ow5+9t9+IjoCRt0pu0SRSps4gYcg1BjS+gIFnuCtB/
B9Ysh+rHo9ne9iojFd9TrEYQSAXebVEYSOjqPWV3E7gd0EXuF+JY0akj8JBduHt3
mfogxVtJdaHDjHtpHoHhBTpHG8l/E2n/47eFDmCiTsBGdL54R4jJSkOu8QmWBgzz
HVNX+f86SJ2haUw=
=gkFF
-----END PGP SIGNATURE-----
Merge tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull IMA updates from Mimi Zohar:
"In addition to loading the kernel module signing key onto the builtin
keyring, load it onto the IMA keyring as well.
Also six trivial changes and bug fixes"
* tag 'integrity-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity:
ima: ensure IMA_APPRAISE_MODSIG has necessary dependencies
ima: Fix fall-through warnings for Clang
integrity: Add declarations to init_once void arguments.
ima: Fix function name error in comment.
ima: enable loading of build time generated key on .ima keyring
ima: enable signing of modules with build time generated key
keys: cleanup build time module signing keys
ima: Fix the error code for restoring the PCR value
ima: without an IMA policy loaded, return quickly
Currently, -Wunused-but-set-variable is only supported by GCC so it is
disabled unconditionally in a GCC only block (it is enabled with W=1).
clang currently has its implementation for this warning in review so
preemptively move this statement out of the GCC only block and wrap it
with cc-disable-warning so that both compilers function the same.
Cc: stable@vger.kernel.org
Link: https://reviews.llvm.org/D100581
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Tested-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
We maintain .gitignore and Makefiles so build artifacts are properly
ignored by Git, and cleaned up by 'make clean'. However, the code is
always changing; generated files are often moved to another directory,
or removed when they become unnecessary. Such garbage files tend to be
left over in the source tree because people usually git-pull without
cleaning the tree.
This is not only the noise for 'git status', but also a build issue
in some cases.
One solution is to remove a stale file like commit 223c24a7db ("kbuild:
Automatically remove stale <linux/version.h> file") did. Such workaround
should be removed after a while, but we forget about that if we scatter
the workaround code in random places.
So, this commit adds a new script to collect cleanings of stale files.
As a start point, move the code in arch/arm/boot/compressed/Makefile
into this script.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
- Change 'option defconfig' to the environment variable
KCONFIG_DEFCONFIG_LIST
- Refactor tinyconfig without using allnoconfig_y
- Remove 'option allnoconfig_y' syntax
- Change 'option modules' to 'modules'
- Do not use /boot/config-* etc. as base config for cross-compilation
- Fix a search bug in nconf
- Various code cleanups
-----BEGIN PGP SIGNATURE-----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=+eSh
-----END PGP SIGNATURE-----
Merge tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kconfig updates from Masahiro Yamada:
- Change 'option defconfig' to the environment variable
KCONFIG_DEFCONFIG_LIST
- Refactor tinyconfig without using allnoconfig_y
- Remove 'option allnoconfig_y' syntax
- Change 'option modules' to 'modules'
- Do not use /boot/config-* etc. as base config for cross-compilation
- Fix a search bug in nconf
- Various code cleanups
* tag 'kconfig-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (34 commits)
kconfig: refactor .gitignore
kconfig: highlight xconfig 'comment' lines with '***'
kconfig: highlight gconfig 'comment' lines with '***'
kconfig: gconf: remove unused code
kconfig: remove unused PACKAGE definition
kconfig: nconf: stop endless search loops
kconfig: split menu.c out of parser.y
kconfig: nconf: refactor in print_in_middle()
kconfig: nconf: remove meaningless wattrset() call from show_menu()
kconfig: nconf: change set_config_filename() to void function
kconfig: nconf: refactor attributes setup code
kconfig: nconf: remove unneeded default for menu prompt
kconfig: nconf: get rid of (void) casts from wattrset() calls
kconfig: nconf: fix NORMAL attributes
kconfig: mconf,nconf: remove unneeded '\0' termination after snprintf()
kconfig: use /boot/config-* etc. as DEFCONFIG_LIST only for native build
kconfig: change sym_change_count to a boolean flag
kconfig: nconf: fix core dump when searching in empty menu
kconfig: lxdialog: A spello fix and a punctuation added
kconfig: streamline_config.pl: Couple of typo fixes
...
- Evaluate $(call cc-option,...) etc. only for build targets
- Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
- Remove unnecessary --gcc-toolchains Clang flag because the --prefix
flag finds the toolchains
- Do not pass Clang's --prefix flag when using the integrated as
- Check the assembler version in Kconfig time
- Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
some dependencies in Kconfig
- Fix invalid Module.symvers creation when building only modules without
vmlinux
- Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
set, but there is no module to build
- Refactor module installation Makefile
- Support zstd for module compression
- Convert alpha and ia64 to use generic shell scripts to generate the
syscall headers
- Add a new elfnote to indicate if the kernel was built with LTO, which
will be used by pahole
- Flatten the directory structure under include/config/ so CONFIG options
and filenames match
- Change the deb source package name from linux-$(KERNELRELEASE) to
linux-upstream
-----BEGIN PGP SIGNATURE-----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=ti9L
-----END PGP SIGNATURE-----
Merge tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild updates from Masahiro Yamada:
- Evaluate $(call cc-option,...) etc. only for build targets
- Add CONFIG_VMLINUX_MAP to generate .map file when linking vmlinux
- Remove unnecessary --gcc-toolchains Clang flag because the --prefix
flag finds the toolchains
- Do not pass Clang's --prefix flag when using the integrated as
- Check the assembler version in Kconfig time
- Add new CONFIG options, AS_VERSION, AS_IS_GNU, AS_IS_LLVM to clean up
some dependencies in Kconfig
- Fix invalid Module.symvers creation when building only modules
without vmlinux
- Fix false-positive modpost warnings when CONFIG_TRIM_UNUSED_KSYMS is
set, but there is no module to build
- Refactor module installation Makefile
- Support zstd for module compression
- Convert alpha and ia64 to use generic shell scripts to generate the
syscall headers
- Add a new elfnote to indicate if the kernel was built with LTO, which
will be used by pahole
- Flatten the directory structure under include/config/ so CONFIG
options and filenames match
- Change the deb source package name from linux-$(KERNELRELEASE) to
linux-upstream
* tag 'kbuild-v5.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (42 commits)
kbuild: Add $(KBUILD_HOSTLDFLAGS) to 'has_libelf' test
kbuild: deb-pkg: change the source package name to linux-upstream
tools: do not include scripts/Kbuild.include
kbuild: redo fake deps at include/config/*.h
kbuild: remove TMPO from try-run
MAINTAINERS: add pattern for dummy-tools
kbuild: add an elfnote for whether vmlinux is built with lto
ia64: syscalls: switch to generic syscallhdr.sh
ia64: syscalls: switch to generic syscalltbl.sh
alpha: syscalls: switch to generic syscallhdr.sh
alpha: syscalls: switch to generic syscalltbl.sh
sysctl: use min() helper for namecmp()
kbuild: add support for zstd compressed modules
kbuild: remove CONFIG_MODULE_COMPRESS
kbuild: merge scripts/Makefile.modsign to scripts/Makefile.modinst
kbuild: move module strip/compression code into scripts/Makefile.modinst
kbuild: refactor scripts/Makefile.modinst
kbuild: rename extmod-prefix to extmod_prefix
kbuild: check module name conflict for external modules as well
kbuild: show the target directory for depmod log
...
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)
-----BEGIN PGP SIGNATURE-----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=wU6U
-----END PGP SIGNATURE-----
Merge tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux
Pull CFI on arm64 support from Kees Cook:
"This builds on last cycle's LTO work, and allows the arm64 kernels to
be built with Clang's Control Flow Integrity feature. This feature has
happily lived in Android kernels for almost 3 years[1], so I'm excited
to have it ready for upstream.
The wide diffstat is mainly due to the treewide fixing of mismatched
list_sort prototypes. Other things in core kernel are to address
various CFI corner cases. The largest code portion is the CFI runtime
implementation itself (which will be shared by all architectures
implementing support for CFI). The arm64 pieces are Acked by arm64
maintainers rather than coming through the arm64 tree since carrying
this tree over there was going to be awkward.
CFI support for x86 is still under development, but is pretty close.
There are a handful of corner cases on x86 that need some improvements
to Clang and objtool, but otherwise works well.
Summary:
- Clean up list_sort prototypes (Sami Tolvanen)
- Introduce CONFIG_CFI_CLANG for arm64 (Sami Tolvanen)"
* tag 'cfi-v5.13-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux:
arm64: allow CONFIG_CFI_CLANG to be selected
KVM: arm64: Disable CFI for nVHE
arm64: ftrace: use function_nocfi for ftrace_call
arm64: add __nocfi to __apply_alternatives
arm64: add __nocfi to functions that jump to a physical address
arm64: use function_nocfi with __pa_symbol
arm64: implement function_nocfi
psci: use function_nocfi for cpu_resume
lkdtm: use function_nocfi
treewide: Change list_sort to use const pointers
bpf: disable CFI in dispatcher functions
kallsyms: strip ThinLTO hashes from static functions
kthread: use WARN_ON_FUNCTION_MISMATCH
workqueue: use WARN_ON_FUNCTION_MISMATCH
module: ensure __cfi_check alignment
mm: add generic function_nocfi macro
cfi: add __cficanonical
add support for Clang CFI
Provide support for randomized stack offsets per syscall to make
stack-based attacks harder which rely on the deterministic stack layout.
The feature is based on the original idea of PaX's RANDSTACK feature, but
uses a significantly different implementation.
The offset does not affect the pt_regs location on the task stack as this
was agreed on to be of dubious value. The offset is applied before the
actual syscall is invoked.
The offset is stored per cpu and the randomization happens at the end of
the syscall which is less predictable than on syscall entry.
The mechanism to apply the offset is via alloca(), i.e. abusing the
dispised VLAs. This comes with the drawback that stack-clash-protection
has to be disabled for the affected compilation units and there is also
a negative interaction with stack-protector.
Those downsides are traded with the advantage that this approach does not
require any intrusive changes to the low level assembly entry code, does
not affect the unwinder and the correct stack alignment is handled
automatically by the compiler.
The feature is guarded with a static branch which avoids the overhead when
disabled.
Currently this is supported for X86 and ARM64.
-----BEGIN PGP SIGNATURE-----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=GMlJ
-----END PGP SIGNATURE-----
Merge tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull entry code update from Thomas Gleixner:
"Provide support for randomized stack offsets per syscall to make
stack-based attacks harder which rely on the deterministic stack
layout.
The feature is based on the original idea of PaX's RANDSTACK feature,
but uses a significantly different implementation.
The offset does not affect the pt_regs location on the task stack as
this was agreed on to be of dubious value. The offset is applied
before the actual syscall is invoked.
The offset is stored per cpu and the randomization happens at the end
of the syscall which is less predictable than on syscall entry.
The mechanism to apply the offset is via alloca(), i.e. abusing the
dispised VLAs. This comes with the drawback that
stack-clash-protection has to be disabled for the affected compilation
units and there is also a negative interaction with stack-protector.
Those downsides are traded with the advantage that this approach does
not require any intrusive changes to the low level assembly entry
code, does not affect the unwinder and the correct stack alignment is
handled automatically by the compiler.
The feature is guarded with a static branch which avoids the overhead
when disabled.
Currently this is supported for X86 and ARM64"
* tag 'x86-entry-2021-04-26' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
arm64: entry: Enable random_kstack_offset support
lkdtm: Add REPORT_STACK for checking stack offsets
x86/entry: Enable random_kstack_offset support
stack: Optionally randomize kernel stack offset each syscall
init_on_alloc: Optimize static branches
jump_label: Provide CONFIG-driven build state defaults
Normally, invocations of $(HOSTCC) include $(KBUILD_HOSTLDFLAGS), which
in turn includes $(HOSTLDFLAGS), which allows users to pass in their own
flags when linking. However, the 'has_libelf' test does not, meaning
that if a user requests a specific linker via HOSTLDFLAGS=-fuse-ld=...,
it is not respected and the build might error.
For example, if a user building with clang wants to use all of the LLVM
tools without any GNU tools, they might remove all of the GNU tools from
their system or PATH then build with
$ make HOSTLDFLAGS=-fuse-ld=lld LLVM=1 LLVM_IAS=1
which says use all of the LLVM tools, the integrated assembler, and
ld.lld for linking host executables. Without this change, the build will
error because $(HOSTCC) uses its default linker, rather than the one
requested via -fuse-ld=..., which is GNU ld in clang's case in a default
configuration.
error: Cannot generate ORC metadata for CONFIG_UNWINDER_ORC=y, please
install libelf-dev, libelf-devel or elfutils-libelf-devel
make[1]: *** [Makefile:1260: prepare-objtool] Error 1
Add $(KBUILD_HOSTLDFLAGS) to the 'has_libelf' test so that the linker
choice is respected.
Link: https://github.com/ClangBuiltLinux/linux/issues/479
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/Makefile.modsign is a subset of scripts/Makefile.modinst,
and duplicates the code. Let's merge them.
By the way, you do not need to run 'make modules_sign' explicitly
because modules are signed as a part of 'make modules_install' when
CONFIG_MODULE_SIG_ALL=y. If CONFIG_MODULE_SIG_ALL=n, mod_sign_cmd is
set to 'true', so 'make modules_sign' is not functional.
In my understanding, the reason of still keeping this is to handle
corner cases like commit 64178cb62c ("builddeb: fix stripped module
signatures if CONFIG_DEBUG_INFO and CONFIG_MODULE_SIG_ALL are set").
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Both mod_strip_cmd and mod_compress_cmd are only used in
scripts/Makefile.modinst, hence there is no good reason to define them
in the top Makefile. Move the relevant code to scripts/Makefile.modinst.
Also, show separate log messages for each of install, strip, sign, and
compress.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
scripts/Makefile.modinst is ugly and weird in multiple ways; it
specifies real files $(modules) as phony, makes directory manipulation
needlessly too complicated.
Clean up the Makefile code, and show the full path of installed modules
in the log.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
This seems to be useful in sub-make as well. As a preparation of
exporting it, rename extmod-prefix to extmod_prefix because exported
variables cannot contain hyphens.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
If there are multiple modules with the same name in the same external
module tree, there is ambiguity about which one will be loaded, and
very likely something odd is happening.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
If you attempt to build or install modules ('make modules(_install)'
with CONFIG_MODULES disabled, you will get a clear error message, but
nothing for external module builds.
Factor out the modules and modules_install rules into the common part,
so you will get the same error message when you try to build external
modules with CONFIG_MODULES=n.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
