[ Upstream commit 0f942bdfe9d463be3073301519492f8d53c6b2d5 ]
The power management configuration of 4xxx devices is too aggressive
and in some conditions the device might be prematurely put to a low
power state.
Increase the idle filter value to prevent that.
In future, this will be set by firmware.
Fixes: e5745f3411 ("crypto: qat - enable power management for QAT GEN4")
Signed-off-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Reviewed-by: Damian Muszynski <damian.muszynski@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 33937607efa050d9e237e0c4ac4ada02d961c466 ]
We are utilizing BPF LSM to monitor BPF operations within our container
environment. When we add support for raw_tracepoint, it hits below
error.
; (const void *)attr->raw_tracepoint.name);
27: (79) r3 = *(u64 *)(r2 +0)
access beyond the end of member map_type (mend:4) in struct (anon) with off 0 size 8
It can be reproduced with below BPF prog.
SEC("lsm/bpf")
int BPF_PROG(bpf_audit, int cmd, union bpf_attr *attr, unsigned int size)
{
switch (cmd) {
case BPF_RAW_TRACEPOINT_OPEN:
bpf_printk("raw_tracepoint is %s", attr->raw_tracepoint.name);
break;
default:
break;
}
return 0;
}
The reason is that when accessing a field in a union, such as bpf_attr,
if the field is located within a nested struct that is not the first
member of the union, it can result in incorrect field verification.
union bpf_attr {
struct {
__u32 map_type; <<<< Actually it will find that field.
__u32 key_size;
__u32 value_size;
...
};
...
struct {
__u64 name; <<<< We want to verify this field.
__u32 prog_fd;
} raw_tracepoint;
};
Considering the potential deep nesting levels, finding a perfect
solution to address this issue has proven challenging. Therefore, I
propose a solution where we simply skip the verification process if the
field in question is located within a union.
Fixes: 7e3617a72d ("bpf: Add array support to btf_struct_access")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Link: https://lore.kernel.org/r/20230713025642.27477-4-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5125e757e62f6c1d5478db4c2b61a744060ddf3f ]
To avoid returning uninitialized or random values when querying the file
descriptor (fd) and accessing probe_addr, it is necessary to clear the
variable prior to its use.
Fixes: 41bdc4b40e ("bpf: introduce bpf subcommand BPF_TASK_FD_QUERY")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Acked-by: Yonghong Song <yhs@fb.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20230709025630.3735-6-laoar.shao@gmail.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8a0260dbf6553c969248b6530cafadac46562f47 ]
realloc() and reallocarray() can either return NULL or a special
non-NULL pointer, if their size argument is zero. This requires a bit
more care to handle NULL-as-valid-result situation differently from
NULL-as-error case. This has caused real issues before ([0]), and just
recently bit again in production when performing bpf_program__attach_usdt().
This patch fixes 4 places that do or potentially could suffer from this
mishandling of NULL, including the reported USDT-related one.
There are many other places where realloc()/reallocarray() is used and
NULL is always treated as an error value, but all those have guarantees
that their size is always non-zero, so those spot don't need any extra
handling.
[0] d08ab82f59d5 ("libbpf: Fix double-free when linker processes empty sections")
Fixes: 999783c8bb ("libbpf: Wire up spec management and other arch-independent USDT logic")
Fixes: b63b3c490e ("libbpf: Add bpf_program__set_insns function")
Fixes: 697f104db8 ("libbpf: Support custom SEC() handlers")
Fixes: b126882672 ("libbpf: Change the order of data and text relocations.")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20230711024150.1566433-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 658ac06801315b739774a15796ff06913ef5cad5 ]
Fix the following error when building bpftool:
CLANG profiler.bpf.o
CLANG pid_iter.bpf.o
skeleton/profiler.bpf.c:18:21: error: invalid application of 'sizeof' to an incomplete type 'struct bpf_perf_event_value'
__uint(value_size, sizeof(struct bpf_perf_event_value));
^ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:13:39: note: expanded from macro '__uint'
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helper_defs.h:7:8: note: forward declaration of 'struct bpf_perf_event_value'
struct bpf_perf_event_value;
^
struct bpf_perf_event_value is being used in the kernel only when
CONFIG_BPF_EVENTS is enabled, so it misses a BTF entry then.
Define struct bpf_perf_event_value___local with the
`preserve_access_index` attribute inside the pid_iter BPF prog to
allow compiling on any configs. It is a full mirror of a UAPI
structure, so is compatible both with and w/o CO-RE.
bpf_perf_event_read_value() requires a pointer of the original type,
so a cast is needed.
Fixes: 47c09d6a9f ("bpftool: Introduce "prog profile" command")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-5-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44ba7b30e84fb40da2295e85a6d209e199fdc977 ]
In order to allow the BPF program in bpftool's pid_iter.bpf.c to compile
correctly on hosts where vmlinux.h does not define
BPF_LINK_TYPE_PERF_EVENT (running kernel versions lower than 5.15, for
example), define and use a local copy of the enum value. This requires
LLVM 12 or newer to build the BPF program.
Fixes: cbdaf71f7e ("bpftool: Add bpf_cookie to link output")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-4-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67a43462ee2405c94e985a747bdcb8e3a0d66203 ]
When building bpftool with !CONFIG_PERF_EVENTS:
skeleton/pid_iter.bpf.c:47:14: error: incomplete definition of type 'struct bpf_perf_link'
perf_link = container_of(link, struct bpf_perf_link, link);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:74:22: note: expanded from macro 'container_of'
((type *)(__mptr - offsetof(type, member))); \
^~~~~~~~~~~~~~~~~~~~~~
tools/bpf/bpftool/bootstrap/libbpf/include/bpf/bpf_helpers.h:68:60: note: expanded from macro 'offsetof'
#define offsetof(TYPE, MEMBER) ((unsigned long)&((TYPE *)0)->MEMBER)
~~~~~~~~~~~^
skeleton/pid_iter.bpf.c:44:9: note: forward declaration of 'struct bpf_perf_link'
struct bpf_perf_link *perf_link;
^
&bpf_perf_link is being defined and used only under the ifdef.
Define struct bpf_perf_link___local with the `preserve_access_index`
attribute inside the pid_iter BPF prog to allow compiling on any
configs. CO-RE will substitute it with the real struct bpf_perf_link
accesses later on.
container_of() uses offsetof(), which does the necessary CO-RE
relocation if the field is specified with `preserve_access_index` - as
is the case for struct bpf_perf_link___local.
Fixes: cbdaf71f7e ("bpftool: Add bpf_cookie to link output")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-3-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbeeb0dc02f8ac7b975b2ab0080ace53d43d62a ]
When CONFIG_PERF_EVENTS is not set, struct perf_event remains empty.
However, the structure is being used by bpftool indirectly via BTF.
This leads to:
skeleton/pid_iter.bpf.c:49:30: error: no member named 'bpf_cookie' in 'struct perf_event'
return BPF_CORE_READ(event, bpf_cookie);
~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~
...
skeleton/pid_iter.bpf.c:49:9: error: returning 'void' from a function with incompatible result type '__u64' (aka 'unsigned long long')
return BPF_CORE_READ(event, bpf_cookie);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Tools and samples can't use any CONFIG_ definitions, so the fields
used there should always be present.
Define struct perf_event___local with the `preserve_access_index`
attribute inside the pid_iter BPF prog to allow compiling on any
configs. CO-RE will substitute it with the real struct perf_event
accesses later on.
Fixes: cbdaf71f7e ("bpftool: Add bpf_cookie to link output")
Suggested-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexander Lobakin <alobakin@pm.me>
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20230707095425.168126-2-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 17e8e5d6e09adb4b4f4fb5c89b3ec3fcae2c64a6 ]
Alexei reported:
After fast forwarding bpf-next today bpf_nf test started to fail when
run twice:
$ ./test_progs -t bpf_nf
#17 bpf_nf:OK
Summary: 1/10 PASSED, 0 SKIPPED, 0 FAILED
$ ./test_progs -t bpf_nf
All error logs:
test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec
test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK
--set-mark 42/0 0 nsec
(network_helpers.c:102: errno: Address already in use) Failed to bind socket
test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0
#17/1 bpf_nf/xdp-ct:FAIL
test_bpf_nf_ct:PASS:test_bpf_nf__open_and_load 0 nsec
test_bpf_nf_ct:PASS:iptables-legacy -t raw -A PREROUTING -j CONNMARK
--set-mark 42/0 0 nsec
(network_helpers.c:102: errno: Address already in use) Failed to bind socket
test_bpf_nf_ct:FAIL:start_server unexpected start_server: actual -1 < expected 0
#17/2 bpf_nf/tc-bpf-ct:FAIL
#17 bpf_nf:FAIL
Summary: 0/8 PASSED, 0 SKIPPED, 1 FAILED
I was able to locally reproduce as well. Rearrange the connection teardown
so that the client closes its connection first so that we don't need to
linger in TCP time-wait.
Fixes: e81fbd4c1b ("selftests/bpf: Add existing connection bpf_*_ct_lookup() test")
Reported-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/CAADnVQ+0dnDq_v_vH1EfkacbfGnHANaon7zsw10pMb-D9FS0Pw@mail.gmail.com
Link: https://lore.kernel.org/bpf/20230626131942.5100-1-daniel@iogearbox.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 03997da042dac73c69e60d91942c727c76828b65 ]
Since the 'cpus' field of policy structure will become empty in the
cpufreq core API, it is better to use 'related_cpus' in the exit()
callback of driver.
Fixes: c3274763bf ("cpufreq: powernow-k8: Initialize per-cpu data-structures properly")
Signed-off-by: Liao Chang <liaochang1@huawei.com>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8b94da92559f7e403dc7ab81937cc50f949ee2fd ]
preserve_pci_rom_image() was accessing the romsize field in
efi_pci_io_protocol_t directly instead of using the efi_table_attr()
helper. This prevents the ROM image from being saved correctly during a
mixed mode boot.
Fixes: 2c3625cb9f ("efi/x86: Fold __setup_efi_pci32() and __setup_efi_pci64() into one function")
Signed-off-by: Mikel Rychliski <mikel@mikelr.com>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8d6e5e8268e89979d86501dbb8385ce2e6154de1 ]
In amd-pstate-ut, shared memory-based systems call
get_shared_mem() as part of amd_pstate_ut_check_enabled()
function. This function was written when CONFIG_X86_AMD_PSTATE
was tristate config and amd_pstate can be built as a module.
Currently CONFIG_X86_AMD_PSTATE is a boolean config and module
parameter shared_mem is removed. But amd-pstate-ut code still
accesses this module parameter. Remove those accesses.
Fixes: 456ca88d8a ("cpufreq: amd-pstate: change amd-pstate driver to be built-in type")
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Meng Li <li.meng@amd.com>
Reviewed-by: Wyes Karny <wyes.karny@amd.com>
Suggested-by: Wyes Karny <wyes.karny@amd.com>
Signed-off-by: Swapnil Sapkal <swapnil.sapkal@amd.com>
[ rjw: Subject edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f96801f0cfcefc0a16b146596577c53c75ee9773 ]
If of_parse_phandle_with_args() called from __thermal_of_bind() or
__thermal_of_unbind() fails, cooling_spec.np will not be initialized,
so move the of_node_put() calls below the respective return value checks
to avoid dereferencing an uninitialized pointer.
Fixes: 3fd6d6e2b4 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
[ rjw: Subject and changelog edits ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9cc8cd086f05d9a01026c65c98da88561e9c619e ]
The constraints table should be resetting the `list` object
after running through all of `info_obj` iterations.
This adjusts whitespace as well as less code will now be included
with each loop. This fixes a functional problem is fixed where a
badly formed package in the inner loop may have incorrect data.
Fixes: 146f1ed852 ("ACPI: PM: s2idle: Add AMD support to handle _DSM")
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3c6b1212d20bbbffcad5709ab0f2d5ed9b5859a8 ]
When code uses a pre-increment it makes the reader question "why".
In the constraint fetching code there is no reason for the variables
to be pre-incremented so adjust to post-increment.
No intended functional changes.
Reviewed-by: Kuppuswamy Sathyanarayanan <sathyanarayanan.kuppuswamy@linux.intel.com>
Suggested-by: Bjorn Helgaas <helgaas@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Stable-dep-of: 9cc8cd086f05 ("ACPI: x86: s2idle: Fix a logic error parsing AMD constraints table")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2e99b73afde18853754c5fae8e8d1a66fe5e3f64 ]
Return value of function eiointc_index is int, however it is converted
into uint32_t and then compared smaller than zero, this will cause logic
problem.
Fixes: dd281e1a1a ("irqchip: Add Loongson Extended I/O interrupt controller support")
Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230811095805.2974722-2-maobibo@loongson.cn
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cba33db3fc4dbf2e54294b0e499d2335a3a00d78 ]
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES securekey blobs as a
supplement to the PKEY_TYPE_EP11 (which won't work in environments
with session-bound keys). This new keyblobs has a different maximum
size, so fix paes crypto module to accept also these larger keyblobs.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9352e4b9b9eff949bcc6907b8569b3a1d992f1e ]
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced a new PKEY_TYPE_EP11_AES securekey type as
a supplement to the existing PKEY_TYPE_EP11 (which won't work in
environments with session-bound keys). The pkey EP11 securekey
attributes use PKEY_TYPE_EP11_AES (instead of PKEY_TYPE_EP11)
keyblobs, to make the generated keyblobs usable also in environments,
where session-bound keys are required.
There should be no negative impacts to userspace because the internal
structure of the keyblobs is opaque. The increased size of the
generated keyblobs is reflected by the changed size of the attributes.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fb249ce7f7bfd8621a38e4ad401ba74b680786d4 ]
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES for the PKEY_GENSECK2
IOCTL, to enable userspace to generate securekey blobs of this
type. Unfortunately, all PKEY_GENSECK2 IOCTL requests for
PKEY_TYPE_EP11_AES return with an error (-EINVAL). Fix the handling
for PKEY_TYPE_EP11_AES in PKEY_GENSECK2 IOCTL, so that userspace can
generate securekey blobs of this type.
The start of the header and the keyblob, as well as the length need
special handling, depending on the internal keyversion. Add a helper
function that splits an uninitialized buffer into start and size of
the header as well as start and size of the payload, depending on the
requested keyversion.
Do the header-related calculations and the raw genkey request handling
in separate functions. Use the raw genkey request function for
internal purposes.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 37a08f010b7c423b5e4c9ed3b187d21166553007 ]
Commit 'fa6999e326fe ("s390/pkey: support CCA and EP11 secure ECC
private keys")' introduced PKEY_TYPE_EP11_AES as a supplement to
PKEY_TYPE_EP11. All pkeys have an internal header/payload structure,
which is opaque to the userspace. The header structures for
PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES are nearly identical and there
is no reason, why different structures are used. In preparation to fix
the keyversion handling in the broken PKEY IOCTLs, the same header
structure is used for PKEY_TYPE_EP11 and PKEY_TYPE_EP11_AES. This
reduces the number of different code paths and increases the
readability.
Fixes: fa6999e326 ("s390/pkey: support CCA and EP11 secure ECC private keys")
Signed-off-by: Holger Dengler <dengler@linux.ibm.com>
Reviewed-by: Ingo Franzki <ifranzki@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fbf4dec702774286db409815ffb077711a96b824 ]
Observed occassional failures in the futex_wait_timeout test:
ok 1 futex_wait relative succeeds
ok 2 futex_wait_bitset realtime succeeds
ok 3 futex_wait_bitset monotonic succeeds
ok 4 futex_wait_requeue_pi realtime succeeds
ok 5 futex_wait_requeue_pi monotonic succeeds
not ok 6 futex_lock_pi realtime returned 0
......
The test expects the child thread to complete some steps before
the parent thread gets to run. There is an implicit expectation
of the order of invocation of futex_lock_pi between the child thread
and the parent thread. Make this order explicit. If the order is
not met, the futex_lock_pi call in the parent thread succeeds and
will not timeout.
Fixes: f4addd54b1 ("selftests: futex: Expand timeout test")
Signed-off-by: Nysal Jan K.A <nysal@linux.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f4e2bd91ddf5e8543cbe7ad80b3fba3d2dc63fa3 ]
In current driver, counter0 will be enabled after ddr_perf_pmu_enable()
is called even though none of the 4 counters are used. This will cause
counter0 continue to count until ddr_perf_pmu_disabled() is called. If
pmu is not disabled all the time, the pmu interrupt will be asserted
from time to time due to counter0 will overflow and irq handler will
clear it. It's not an expected behavior. This patch will not enable
counter0 if none of 4 counters are used.
Fixes: 9a66d36cc7 ("drivers/perf: imx_ddr: Add DDR performance counter support to perf")
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Link: https://lore.kernel.org/r/20230811015438.1999307-2-xu.yang_2@nxp.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7fcb99877f9f542c918509b2801065adcaf46fa ]
There is a 10% rounding error in the intial value of the
sysctl_sched_rr_timeslice with CONFIG_HZ_300=y.
This was found with LTP test sched_rr_get_interval01:
sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed
sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns
sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90
sched_rr_get_interval01.c:57: TPASS: sched_rr_get_interval() passed
sched_rr_get_interval01.c:64: TPASS: Time quantum 0s 99999990ns
sched_rr_get_interval01.c:72: TFAIL: /proc/sys/kernel/sched_rr_timeslice_ms != 100 got 90
What this test does is to compare the return value from the
sched_rr_get_interval() and the sched_rr_timeslice_ms sysctl file and
fails if they do not match.
The problem it found is the intial sysctl file value which was computed as:
static int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE;
which works fine as long as MSEC_PER_SEC is multiple of HZ, however it
introduces 10% rounding error for CONFIG_HZ_300:
(MSEC_PER_SEC / HZ) * (100 * HZ / 1000)
(1000 / 300) * (100 * 300 / 1000)
3 * 30 = 90
This can be easily fixed by reversing the order of the multiplication
and division. After this fix we get:
(MSEC_PER_SEC * (100 * HZ / 1000)) / HZ
(1000 * (100 * 300 / 1000)) / 300
(1000 * 30) / 300 = 100
Fixes: 975e155ed8 ("sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds")
Signed-off-by: Cyril Hrubis <chrubis@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Mel Gorman <mgorman@suse.de>
Tested-by: Petr Vorel <pvorel@suse.cz>
Link: https://lore.kernel.org/r/20230802151906.25258-2-chrubis@suse.cz
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01948b09edc3fecf8486c57c2d2fb8b80886f3d0 ]
For both SVE and SME we abuse the generic register field comparison
support in the cpufeature code as part of our detection of unsupported
variations in the vector lengths available to PEs, reporting the maximum
vector lengths via ZCR_EL1.LEN and SMCR_EL1.LEN. Since these are
configuration registers rather than identification registers the
assumptions the cpufeature code makes about how unknown bitfields behave
are invalid, leading to warnings when SME features like FA64 are enabled
and we hotplug a CPU:
CPU features: SANITY CHECK: Unexpected variation in SYS_SMCR_EL1. Boot CPU: 0x0000000000000f, CPU3: 0x0000008000000f
CPU features: Unsupported CPU feature variation detected.
SVE has no controls other than the vector length so is not yet impacted
but the same issue will apply there if any are defined.
Since the only field we are interested in having the cpufeature code
handle is the length field and we use a custom read function to obtain
the value we can avoid these warnings by filtering out all other bits
when we return the register value, if we're doing that we don't need to
bother reading the register at all and can simply use the RDVL/RDSVL
value we were filling in instead.
Fixes: 2e0f2478ea ("arm64/sve: Probe SVE capabilities and usable vector lengths")
FixeS: b42990d3bf ("arm64/sme: Identify supported SME vector lengths at boot")
Signed-off-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Link: https://lore.kernel.org/r/20230731-arm64-sme-fa64-hotplug-v2-1-7714c00dd902@kernel.org
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fcd3d2c082b2a19da2326b2b38ba5a05536dcd32 ]
During development the architecture added the RDSVL instruction which means
we do not need to enter streaming mode to enumerate the SME VLs, use it
when we probe the maximum supported VL. Other users were already updated.
No functional change.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20221223-arm64-sme-probe-max-v1-1-cbde68f67ad0@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Stable-dep-of: 01948b09edc3 ("arm64/fpsimd: Only provide the length to cpufeature for xCR registers")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 264b82fdb4989cf6a44a2bcd0c6ea05e8026b2ac ]
The 4-to-5 level mode switch trampoline disables long mode and paging in
order to be able to flick the LA57 bit. According to section 3.4.1.1 of
the x86 architecture manual [0], 64-bit GPRs might not retain the upper
32 bits of their contents across such a mode switch.
Given that RBP, RBX and RSI are live at this point, preserve them on the
stack, along with the return address that might be above 4G as well.
[0] Intel® 64 and IA-32 Architectures Software Developer’s Manual, Volume 1: Basic Architecture
"Because the upper 32 bits of 64-bit general-purpose registers are
undefined in 32-bit modes, the upper 32 bits of any general-purpose
register are not preserved when switching from 64-bit mode to a 32-bit
mode (to protected mode or compatibility mode). Software must not
depend on these bits to maintain a value after a 64-bit to 32-bit
mode switch."
Fixes: 194a9749c7 ("x86/boot/compressed/64: Handle 5-level paging boot if kernel is above 4G")
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Link: https://lore.kernel.org/r/20230807162720.545787-2-ardb@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98dfdd9ee93995a408192dbbf3dd219ba23e3738 ]
Users of KERNFS should select it to enforce its being built, so
do this to prevent a build error.
In file included from ../kernel/sched/build_utility.c:97:
../kernel/sched/psi.c: In function 'psi_trigger_poll':
../kernel/sched/psi.c:1479:17: error: implicit declaration of function 'kernfs_generic_poll' [-Werror=implicit-function-declaration]
1479 | kernfs_generic_poll(t->of, wait);
Fixes: aff037078eca ("sched/psi: use kernfs polling functions for PSI trigger polling")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Suren Baghdasaryan <surenb@google.com>
Link: lore.kernel.org/r/202307310732.r65EQFY0-lkp@intel.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5f69ca4229c7d8e23f238174827ee7aa49b0bcb2 ]
All error handling paths go to 'out', except this one. Be consistent and
also branch to 'out' here.
Fixes: e12310a0d3 ("arm64/sme: Implement ptrace support for streaming mode SVE registers")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Mark Brown <broonie@kernel.org>
Reviewed-by: Anshuman Khandual <anshuman.khandual@arm.com>
Link: https://lore.kernel.org/r/aa61301ed2dfd079b74b37f7fede5f179ac3087a.1689616473.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 51a0c3b7f028169e40db930575dd01fe81c3e765 ]
Perf event fd (fd_lm) is not closed when run_fill_buf() returns error.
Close fd_lm only in cat_val() to make it easier to track it is always
closed.
Fixes: 790bf585b0 ("selftests/resctrl: Add Cache Allocation Technology (CAT) selftest")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f99e413eb54652e2436cc56d081176bc9a34cd8d ]
A child calls PARENT_EXIT() when it fails to run a benchmark to kill
the parent process. PARENT_EXIT() lacks unmount for the resctrl FS and
the parent won't be there to unmount it either after it gets killed.
Add the resctrl FS unmount also to PARENT_EXIT().
Fixes: 591a6e8588 ("selftests/resctrl: Add basic resctrl file system operations and data")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d320b1029ee7329ee0638181be967789775b962 ]
The error path in fill_cache() does return before the allocated buffer
is freed leaking the buffer.
The leak was introduced when fill_cache_read() started to return errors
in commit c7b607fa93 ("selftests/resctrl: Fix null pointer
dereference on open failed"), before that both fill functions always
returned 0.
Move free() earlier to prevent the mem leak.
Fixes: c7b607fa93 ("selftests/resctrl: Fix null pointer dereference on open failed")
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Reviewed-by: Reinette Chatre <reinette.chatre@intel.com>
Tested-by: Babu Moger <babu.moger@amd.com>
Tested-by: Shaopeng Tan (Fujitsu) <tan.shaopeng@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d920920f85a82c1c806a4143871a0e8f534732f2 ]
If dev_pm_domain_attach_by_name() returns NULL, then 0 will be passed to
PTR_ERR() as reported by the smatch warning below:
drivers/opp/core.c:2456 _opp_attach_genpd() warn: passing zero to 'PTR_ERR'
Fix it by checking for the non-NULL virt_dev pointer before passing it to
PTR_ERR. Otherwise return -ENODEV.
Fixes: 4ea9496cbc ("opp: Fix error check in dev_pm_opp_attach_genpd()")
Signed-off-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f5063e8948dad7f31adb007284a5d5038ae31bb8 ]
Running the refscale test occasionally crashes the kernel with the
following error:
[ 8569.952896] BUG: unable to handle page fault for address: ffffffffffffffe8
[ 8569.952900] #PF: supervisor read access in kernel mode
[ 8569.952902] #PF: error_code(0x0000) - not-present page
[ 8569.952904] PGD c4b048067 P4D c4b049067 PUD c4b04b067 PMD 0
[ 8569.952910] Oops: 0000 [#1] PREEMPT_RT SMP NOPTI
[ 8569.952916] Hardware name: Dell Inc. PowerEdge R750/0WMWCR, BIOS 1.2.4 05/28/2021
[ 8569.952917] RIP: 0010:prepare_to_wait_event+0x101/0x190
:
[ 8569.952940] Call Trace:
[ 8569.952941] <TASK>
[ 8569.952944] ref_scale_reader+0x380/0x4a0 [refscale]
[ 8569.952959] kthread+0x10e/0x130
[ 8569.952966] ret_from_fork+0x1f/0x30
[ 8569.952973] </TASK>
The likely cause is that init_waitqueue_head() is called after the call to
the torture_create_kthread() function that creates the ref_scale_reader
kthread. Although this init_waitqueue_head() call will very likely
complete before this kthread is created and starts running, it is
possible that the calling kthread will be delayed between the calls to
torture_create_kthread() and init_waitqueue_head(). In this case, the
new kthread will use the waitqueue head before it is properly initialized,
which is not good for the kernel's health and well-being.
The above crash happened here:
static inline void __add_wait_queue(...)
{
:
if (!(wq->flags & WQ_FLAG_PRIORITY)) <=== Crash here
The offset of flags from list_head entry in wait_queue_entry is
-0x18. If reader_tasks[i].wq.head.next is NULL as allocated reader_task
structure is zero initialized, the instruction will try to access address
0xffffffffffffffe8, which is exactly the fault address listed above.
This commit therefore invokes init_waitqueue_head() before creating
the kthread.
Fixes: 653ed64b01 ("refperf: Add a test to measure performance of read-side synchronization")
Signed-off-by: Waiman Long <longman@redhat.com>
Reviewed-by: Qiuxu Zhuo <qiuxu.zhuo@intel.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Acked-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4697b5848bd933f68ebd04836362c8de0cacaf71 ]
Since commit 4e57a4ddf6 ("ARM: 9107/1: syscall: always store
thread_info->abi_syscall"), the seccomp selftests "syscall_errno"
and "syscall_faked" have been broken. Both seccomp and PTRACE depend
on using the special value of "-1" for skipping syscalls. This value
wasn't working because it was getting masked by __NR_SYSCALL_MASK in
both PTRACE_SET_SYSCALL and get_syscall_nr().
Explicitly test for -1 in PTRACE_SET_SYSCALL and get_syscall_nr(),
leaving it exposed when present, allowing tracers to skip syscalls
again.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 4e57a4ddf6 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230810195422.2304827-2-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf007647475b5090819c5fe8da771073145c7334 ]
Since commit 4e57a4ddf6 ("ARM: 9107/1: syscall: always store
thread_info->abi_syscall"), the seccomp selftests "syscall_restart" has
been broken. This was caused by the restart syscall not being stored to
"abi_syscall" during restart setup before branching to the "local_restart"
label. Tracers would see the wrong syscall, and scno would get overwritten
while returning from the TIF_WORK path. Add the missing store.
Cc: Russell King <linux@armlinux.org.uk>
Cc: Arnd Bergmann <arnd@kernel.org>
Cc: Lecopzer Chen <lecopzer.chen@mediatek.com>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: linux-arm-kernel@lists.infradead.org
Fixes: 4e57a4ddf6 ("ARM: 9107/1: syscall: always store thread_info->abi_syscall")
Reviewed-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230810195422.2304827-1-keescook@chromium.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3d46e11fec0c5a8972e5061bb1462119ae5736d ]
Tests that were expecting a signal were not correctly checking for a
SKIP condition. Move the check before the signal checking when
processing test result.
Cc: Shuah Khan <shuah@kernel.org>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Will Drewry <wad@chromium.org>
Cc: linux-kselftest@vger.kernel.org
Fixes: 9847d24af9 ("selftests/harness: Refactor XFAIL into SKIP")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0200679fc7953177941e41c2a4241d0b6c2c5de8 ]
A while ago we received the following report:
"The other outstanding issue I noticed comes from the fact that
fsconfig syscalls may occur in a different userns than that which
called fsopen. That means that resolving the uid/gid via
current_user_ns() can save a kuid that isn't mapped in the associated
namespace when the filesystem is finally mounted. This means that it
is possible for an unprivileged user to create files owned by any
group in a tmpfs mount (since we can set the SUID bit on the tmpfs
directory), or a tmpfs that is owned by any user, including the root
group/user."
The contract for {g,u}id mount options and {g,u}id values in general set
from userspace has always been that they are translated according to the
caller's idmapping. In so far, tmpfs has been doing the correct thing.
But since tmpfs is mountable in unprivileged contexts it is also
necessary to verify that the resulting {k,g}uid is representable in the
namespace of the superblock to avoid such bugs as above.
The new mount api's cross-namespace delegation abilities are already
widely used. After having talked to a bunch of userspace this is the
most faithful solution with minimal regression risks. I know of one
users - systemd - that makes use of the new mount api in this way and
they don't set unresolable {g,u}ids. So the regression risk is minimal.
Link: https://lore.kernel.org/lkml/CALxfFW4BXhEwxR0Q5LSkg-8Vb4r2MONKCcUCVioehXQKr35eHg@mail.gmail.com
Fixes: f32356261d ("vfs: Convert ramfs, shmem, tmpfs, devtmpfs, rootfs to use the new mount API")
Reviewed-by: "Seth Forshee (DigitalOcean)" <sforshee@kernel.org>
Reported-by: Seth Jenkins <sethjenkins@google.com>
Message-Id: <20230801-vfs-fs_context-uidgid-v1-1-daf46a050bbf@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a221ab717c43147f728d93513923ba3528f861bf ]
We do not need to release the iomap_page in iomap_invalidate_folio()
to allow the folio to be split. The splitting code will call
->release_folio() if there is still per-fs private data attached to
the folio. At that point, we will check if the folio is still dirty
and decline to release the iomap_page. It is possible to trigger the
warning in perfectly legitimate circumstances (eg if a disk read fails,
we do a partial write to the folio, then we truncate the folio), which
will cause those writes to be lost.
Fixes: 60d8231089 ("iomap: Support large folios in invalidatepage")
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d5a4f8f775ff990142cdc810a84eae078589d27 ]
The d_hash_and_lookup() function returns error pointers or NULL.
Most incorrect error checks were fixed, but the one in int path_pts()
was forgotten.
Fixes: eedf265aa0 ("devpts: Make each mount of devpts an independent filesystem.")
Signed-off-by: Wang Ming <machel@vivo.com>
Message-Id: <20230713120555.7025-1-machel@vivo.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 758b492047816a3158d027e9fca660bc5bcf20bf ]
For eventfd with flag EFD_SEMAPHORE, when its ctx->count is 0, calling
eventfd_ctx_do_read will cause ctx->count to overflow to ULLONG_MAX.
An underflow can happen with EFD_SEMAPHORE eventfds in at least the
following three subsystems:
(1) virt/kvm/eventfd.c
(2) drivers/vfio/virqfd.c
(3) drivers/virt/acrn/irqfd.c
where (2) and (3) are just modeled after (1). An eventfd must be
specified for use with the KVM_IRQFD ioctl(). This can also be an
EFD_SEMAPHORE eventfd. When the eventfd count is zero or has been
decremented to zero an underflow can be triggered when the irqfd is shut
down by raising the KVM_IRQFD_FLAG_DEASSIGN flag in the KVM_IRQFD
ioctl():
// ctx->count == 0
kvm_vm_ioctl()
-> kvm_irqfd()
-> kvm_irqfd_deassign()
-> irqfd_deactivate()
-> irqfd_shutdown()
-> eventfd_ctx_remove_wait_queue(&cnt)
-> eventfd_ctx_do_read(&cnt)
Userspace polling on the eventfd wouldn't notice the underflow because 1
is always returned as the value from eventfd_read() while ctx->count
would've underflowed. It's not a huge deal because this should only be
happening when the irqfd is shutdown but we should still fix it and
avoid the spurious wakeup.
Fixes: cb289d6244 ("eventfd - allow atomic read and waitqueue remove")
Signed-off-by: Wen Yang <wenyang.linux@foxmail.com>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Dylan Yudaken <dylany@fb.com>
Cc: David Woodhouse <dwmw@amazon.co.uk>
Cc: Matthew Wilcox <willy@infradead.org>
Cc: linux-fsdevel@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Message-Id: <tencent_7588DFD1F365950A757310D764517A14B306@qq.com>
[brauner: rewrite commit message and add explanation how this underflow can happen]
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba38980add7ffc9e674ada5b4ded4e7d14e76581 ]
__getblk() can return a NULL pointer if we run out of memory or if we
try to access beyond the end of the device; check it and handle it
appropriately.
Signed-off-by: Matthew Wilcox (Oracle) <willy@infradead.org>
Link: https://lore.kernel.org/lkml/CAFcO6XOacq3hscbXevPQP7sXRoYFz34ZdKPYjmd6k5sZuhGFDw@mail.gmail.com/
Tested-by: butt3rflyh4ck <butterflyhuangxx@gmail.com>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2") # probably introduced in 2002
Acked-by: Edward Shishkin <edward.shishkin@gmail.com>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit edd75c802855271c8610f58a2fc9e54aefc49ce5 upstream.
Building BPF selftests with custom HOSTCFLAGS yields an error:
# make HOSTCFLAGS="-O2"
[...]
HOSTCC ./tools/testing/selftests/bpf/tools/build/resolve_btfids/main.o
main.c:73:10: fatal error: linux/rbtree.h: No such file or directory
73 | #include <linux/rbtree.h>
| ^~~~~~~~~~~~~~~~
The reason is that tools/bpf/resolve_btfids/Makefile passes header
include paths by extending HOSTCFLAGS which is overridden by setting
HOSTCFLAGS in the make command (because of Makefile rules [1]).
This patch fixes the above problem by passing the include paths via
`HOSTCFLAGS_resolve_btfids` which is used by tools/build/Build.include
and can be combined with overridding HOSTCFLAGS.
[1] https://www.gnu.org/software/make/manual/html_node/Overriding.html
Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program")
Signed-off-by: Viktor Malik <vmalik@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230530123352.1308488-1-vmalik@redhat.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2531ba0e4ae67d6d0219400af27805fe52cd28e8 upstream.
Thorsten reported build issue with command line that defined extra
HOSTCFLAGS that were not passed into 'prepare' targets, but were
used to build resolve_btfids objects.
This results in build fail when these objects are linked together:
/usr/bin/ld: /build.../tools/bpf/resolve_btfids//libbpf/libbpf.a(libbpf-in.o):
relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE \
object; recompile with -fPIE
Fixing this by passing HOSTCFLAGS in EXTRA_CFLAGS as part of
HOST_OVERRIDES variable for prepare targets.
[1] https://lore.kernel.org/bpf/f7922132-6645-6316-5675-0ece4197bfff@leemhuis.info/
Fixes: 56a2df7615fa ("tools/resolve_btfids: Compile resolve_btfids as host program")
Reported-by: Thorsten Leemhuis <linux@leemhuis.info>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Tested-by: Thorsten Leemhuis <linux@leemhuis.info>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20230209143735.4112845-1-jolsa@kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 56a2df7615fa050cc67b89245b2a482849077939 upstream.
Making resolve_btfids to be compiled as host program so
we can avoid cross compile issues as reported by Nathan.
Also we no longer need HOST_OVERRIDES for BINARY target,
just for 'prepare' targets.
Fixes: 13e07691a16f ("tools/resolve_btfids: Alter how HOSTCC is forced")
Reported-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Tested-by: Nathan Chancellor <nathan@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Link: https://lore.kernel.org/bpf/20230202112839.1131892-1-jolsa@kernel.org
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 13e07691a16ff31b209fbfce25c01ff296b05e45 upstream.
HOSTCC is always wanted when building. Setting CC to HOSTCC happens
after tools/scripts/Makefile.include is included, meaning flags are
set assuming say CC is gcc, but then it can be later set to HOSTCC
which may be clang. tools/scripts/Makefile.include is needed for host
set up and common macros in objtool's Makefile. Rather than override
CC to HOSTCC, just pass CC as HOSTCC to Makefile.build, the libsubcmd
builds and the linkage step. This means the Makefiles don't see things
like CC changing and tool flag determination, and similar, work
properly.
Also, clear the passed subdir as otherwise an outer build may break by
inadvertently passing an inappropriate value.
Signed-off-by: Ian Rogers <irogers@google.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/bpf/20230124064324.672022-2-irogers@google.com
Cc: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
