[ Upstream commit 89e23277f9c16df6f9f9c1a1a07f8f132339c15c ]
mptcp_parse_option() currently sets OPTIONS_MPTCP_MPJ, for the three
possible cases handled for MPTCPOPT_MP_JOIN option.
OPTIONS_MPTCP_MPJ is the combination of three flags:
- OPTION_MPTCP_MPJ_SYN
- OPTION_MPTCP_MPJ_SYNACK
- OPTION_MPTCP_MPJ_ACK
This is a problem, because backup, join_id, token, nonce and/or hmac fields
could be left uninitialized in some cases.
Distinguish the three cases, as following patches will need this step.
Fixes: f296234c98 ("mptcp: Add handling of incoming MP_JOIN requests")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Cc: Peter Krystad <peter.krystad@linux.intel.com>
Cc: Matthieu Baerts <matttbe@kernel.org>
Cc: Mat Martineau <martineau@kernel.org>
Cc: Geliang Tang <geliang.tang@linux.dev>
Reviewed-by: Simon Horman <horms@kernel.org>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Mat Martineau <martineau@kernel.org>
Link: https://lore.kernel.org/r/20240111194917.4044654-2-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e398822c4751017fe401f57409488f5948d12fb5 ]
The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY
is used with the ravb Ethernet driver. It has been discovered that when
bringing the Ethernet interface down/up continuously, e.g., with the
following sh script:
$ while :; do ifconfig eth0 down; ifconfig eth0 up; done
the link speed and duplex are wrong after interrupting the bring down/up
operation even though the Ethernet interface is up. To recover from this
state the following configuration sequence is necessary (executed
manually):
$ ifconfig eth0 down
$ ifconfig eth0 up
The behavior has been identified also on the Microchip SAMA7G5-EK board
which runs the macb driver and uses the same PHY.
The order of PHY-related operations in ravb_open() is as follows:
ravb_open() ->
ravb_phy_start() ->
ravb_phy_init() ->
of_phy_connect() ->
phy_connect_direct() ->
phy_attach_direct() ->
phy_init_hw() ->
phydev->drv->soft_reset()
phydev->drv->config_init()
phydev->drv->config_intr()
phy_resume()
kszphy_resume()
The order of PHY-related operations in ravb_close is as follows:
ravb_close() ->
phy_stop() ->
phy_suspend() ->
kszphy_suspend() ->
genphy_suspend()
// set BMCR_PDOWN bit in MII_BMCR
In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY
to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet).
Thus, when opening the interface after it has been previously closed (via
ravb_close()), the phydev->drv->config_init() and
phydev->drv->config_intr() reach the KSZ9131 PHY driver via the
ksz9131_config_init() and kszphy_config_intr() functions.
KSZ9131 specifies that the MII management interface remains operational
during SPD (Software Power-Down), but (according to manual):
- Only access to the standard registers (0 through 31) is supported.
- Access to MMD address spaces other than MMD address space 1 is possible
if the spd_clock_gate_override bit is set.
- Access to MMD address space 1 is not possible.
The spd_clock_gate_override bit is not used in the KSZ9131 driver.
ksz9131_config_init() configures RGMII delay, pad skews and LEDs by
accessesing MMD registers other than those in address space 1.
The datasheet for the KSZ9131 does not specify what happens if registers
from an unsupported address space are accessed while the PHY is in SPD.
To fix the issue the .soft_reset method has been instantiated for KSZ9131,
too. This resets the PHY to the default state before doing any
configurations to it, thus switching it out of SPD.
Fixes: bff5b4b373 ("net: phy: micrel: add Microchip KSZ9131 initial driver")
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bec161add35b478a7746bf58bcdea6faa19129ef ]
amt driver uses skb->cb for storing tunnel information.
This job is worked before TC layer and then amt driver load tunnel info
from skb->cb after TC layer.
So, its cb area should not be overwrapped with CB area used by TC.
In order to not use cb area used by TC, it skips the biggest cb
structure used by TC, which was qdisc_skb_cb.
But it's not anymore.
Currently, biggest structure of TC's CB is tc_skb_cb.
So, it should skip size of tc_skb_cb instead of qdisc_skb_cb.
Fixes: ec624fe740 ("net/sched: Extend qdisc control block with tc control block")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Jamal Hadi Salim <jhs@mojatatu.com>
Link: https://lore.kernel.org/r/20240107144241.4169520-1-ap420073@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 64e47d8afb5ca533b27efc006405e5bcae2c4a7b ]
The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length
of a received frame. This value is written to the register
AM65_CPSW_PORT_REG_RX_MAXLEN.
The maximum MTU configured on the network device should then leave
some room for the ethernet headers and frame check. Otherwise, if
the network interface is configured to its maximum mtu possible,
the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will
get dropped as oversized.
The switch supports ethernet frame sizes between 64 and 2024 bytes
(including VLAN) as stated in the technical reference manual, so
define AM65_CPSW_MAX_PACKET_SIZE with that maximum size.
Fixes: 93a7653031 ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver")
Signed-off-by: Jorge Sanjuan Garcia <jorge.sanjuangarcia@duagon.com>
Reviewed-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Reviewed-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Link: https://lore.kernel.org/r/20240105085530.14070-2-jorge.sanjuangarcia@duagon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80df7d6af7f6d229b34cf237b2cc9024c07111cd ]
The zpci_get_max_write_size() helper is used to determine the maximum
size a PCI store or load can use at a given __iomem address.
For the PCI block store the following restrictions apply:
1. The dst + len must not cross a 4K boundary in the (pseudo-)MMIO space
2. len must not exceed ZPCI_MAX_WRITE_SIZE
3. len must be a multiple of 8 bytes
4. The src address must be double word (8 byte) aligned
5. The dst address must be double word (8 byte) aligned
Otherwise only a normal PCI store which takes its src value from
a register can be used. For these PCI store restriction 1 still applies.
Similarly 1 also applies to PCI loads.
It turns out zpci_max_write_size() instead implements stricter
conditions which prevents PCI block stores from being used where they
can and should be used. In particular instead of conditions 4 and 5 it
wrongly enforces both dst and src to be size aligned. This indirectly
covers condition 1 but also prevents many legal PCI block stores.
On top of the functional shortcomings the zpci_get_max_write_size() is
misnamed as it is used for both read and write size calculations. Rename
it to zpci_get_max_io_size() and implement the listed conditions
explicitly.
Reviewed-by: Matthew Rosato <mjrosato@linux.ibm.com>
Fixes: cd24834130 ("s390/pci: base support")
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
[agordeev@linux.ibm.com replaced spaces with tabs]
Signed-off-by: Alexander Gordeev <agordeev@linux.ibm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e3b3ec967a7d93b9010a5af9a2394c8b5c8f31ed ]
It's not granted that all entries of struct sof_conn_stream declare
a `normal_link` (a non-SOF, direct link) string, and this is the case
for SoCs that support only SOF paths (hence do not support both direct
and SOF usecases).
For example, in the case of MT8188 there is no normal_link string in
any of the sof_conn_stream entries and there will be more drivers
doing that in the future.
To avoid possible NULL pointer KPs, add a NULL check for `normal_link`.
Fixes: 0caf1120c5 ("ASoC: mediatek: mt8195: extract SOF common code")
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://msgid.link/r/20240111105226.117603-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ccc1318cf4bd90601f221268e42c3374703d681 ]
When using the fls() helper, the translation table should be a power of
two; otherwise, the resulting value will not be correct.
For example, given fls(0x3e00000) - 1 = 25, the PCIe translation window
size will be set to 0x2000000 instead of the expected size 0x3e00000.
Fix the translation window by splitting the MMIO space into multiple tables
if its size is not a power of two.
[kwilczynski: commit log]
Link: https://lore.kernel.org/linux-pci/20231023081423.18559-1-jianjun.wang@mediatek.com
Fixes: d3bf75b579 ("PCI: mediatek-gen3: Add MediaTek Gen3 driver for MT8192")
Signed-off-by: Jianjun Wang <jianjun.wang@mediatek.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c12ca110c613a81cb0f0099019c839d078cd0f38 ]
The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy()
function. The PHY in this case is the Serdes. It is possible that the
PCI instance is configured for two lane operation across two different
Serdes instances, using one lane of each Serdes.
In such a configuration, if the reference clock for one Serdes is
provided by the other Serdes, it results in a race condition. After the
Serdes providing the reference clock is initialized by the PCI driver by
invoking its PHY APIs, it is not guaranteed that this Serdes remains
powered on long enough for the PHY APIs based initialization of the
dependent Serdes. In such cases, the PLL of the dependent Serdes fails
to lock due to the absence of the reference clock from the former Serdes
which has been powered off by the PM Core.
Fix this by obtaining reference to the PHYs before invoking the PHY
initialization APIs and releasing reference after the initialization is
complete.
Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com
Fixes: 49229238ab ("PCI: keystone: Cleanup PHY handling")
Signed-off-by: Siddharth Vadapalli <s-vadapalli@ti.com>
Signed-off-by: Krzysztof Wilczyński <kwilczynski@kernel.org>
Acked-by: Ravi Gunasekaran <r-gunasekaran@ti.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9a1abc24850eb759e36a2f8869161c3b7254c904 ]
The nvmet_tcp_handle_h2c_data_pdu() function should take into
consideration the possibility that the header digest and/or the data
digests are enabled when calculating the expected PDU length, before
comparing it to the value stored in cmd->pdu_len.
Fixes: efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7de1dea76cd6a3707707af4ea2f8bc3cdeaeb11 ]
A previous patch introduced a struct_group() in nvme_common_command to help
stringop fortification figure out the length of the fields, but one function
is not currently using them:
In file included from drivers/nvme/target/core.c:7:
In file included from include/linux/string.h:254:
include/linux/fortify-string.h:592:4: error: call to '__read_overflow2_field' declared with 'warning' attribute: detected read beyond size of field (2nd parameter); maybe use struct_group()? [-Werror,-Wattribute-warning]
__read_overflow2_field(q_size_field, size);
^
Change this one to use the correct field name to avoid the warning.
Fixes: 5c629dc960 ("nvme: use struct group for generic command dwords")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4ee7ffeb4ce50c80bc4504db6f39b25a2df6bcf4 ]
An earlier patch had tried to address a warning about a string copy with
missing zero termination:
drivers/nvme/target/trace.h:52:3: warning: ‘strncpy’ specified bound 32 equals destination size [-Wstringop-truncation]
The new version causes a different warning with some compiler versions, notably
gcc-9 and gcc-10, and also misses the zero padding that was apparently done
intentionally in the original code:
drivers/nvme/target/trace.h:56:2: error: 'strncpy' specified bound depends on the length of the source argument [-Werror=stringop-overflow=]
Change it to use strscpy_pad() with the original length, which will give
a properly padded and zero-terminated string as well as avoiding the warning.
Fixes: d86481e924 ("nvmet: use min of device_path and disk len")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 017dbfc05c31284150819890b4cc86a699cbdb71 ]
For Gen1 isoc-in transfer, host still send out unexpected ACK after device
finish the burst with a short packet, this will cause an exception on the
connected device, such as, a usb 4k camera.
It can be fixed by setting rxfifo depth less than 4k bytes, prefer to use
3k here, the side-effect is that may cause performance drop about 10%,
including bulk transfer.
Fixes: 926d60ae64 ("usb: xhci-mtk: modify the SOF/ITP interval for mt8195")
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Chunfeng Yun <chunfeng.yun@mediatek.com>
Link: https://lore.kernel.org/r/20240104061640.7335-2-chunfeng.yun@mediatek.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55a8210c9e7d21ff2644809699765796d4bfb200 ]
When processing a packed profile in unpack_profile() described like
"profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}"
a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then
passed to aa_splitn_fqname().
aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace.
Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later
aa_alloc_profile() crashes as the new profile name is NULL now.
general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014
RIP: 0010:strlen+0x1e/0xa0
Call Trace:
<TASK>
? strlen+0x1e/0xa0
aa_policy_init+0x1bb/0x230
aa_alloc_profile+0xb1/0x480
unpack_profile+0x3bc/0x4960
aa_unpack+0x309/0x15e0
aa_replace_profiles+0x213/0x33c0
policy_update+0x261/0x370
profile_replace+0x20e/0x2a0
vfs_write+0x2af/0xe00
ksys_write+0x126/0x250
do_syscall_64+0x46/0xf0
entry_SYSCALL_64_after_hwframe+0x6e/0x76
</TASK>
---[ end trace 0000000000000000 ]---
RIP: 0010:strlen+0x1e/0xa0
It seems such behaviour of aa_splitn_fqname() is expected and checked in
other places where it is called (e.g. aa_remove_profiles). Well, there
is an explicit comment "a ns name without a following profile is allowed"
inside.
AFAICS, nothing can prevent unpacked "name" to be in form like
":samba-dcerpcd" - it is passed from userspace.
Deny the whole profile set replacement in such case and inform user with
EPROTO and an explaining message.
Found by Linux Verification Center (linuxtesting.org).
Fixes: 04dc715e24 ("apparmor: audit policy ns specified in policy load")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c51f8788b5d4e9f46afbcf563255cfd355690b3 ]
Add variants of perf_env__insert_bpf_prog_info(), perf_env__insert_btf()
and perf_env__find_btf prefixed with __ to indicate the
env->bpf_progs.lock is assumed held.
Call these variants when the lock is held to avoid recursively taking it
and potentially having a thread deadlock with itself.
Fixes: f8dfeae009 ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Signed-off-by: Ian Rogers <irogers@google.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Acked-by: Song Liu <song@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Huacai Chen <chenhuacai@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: K Prateek Nayak <kprateek.nayak@amd.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ming Wang <wangming01@loongson.cn>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@amd.com>
Link: https://lore.kernel.org/r/20231207014655.1252484-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0849a5441358cef02586fb2d60f707c0db195628 ]
in nvmet_tcp_handle_h2c_data_pdu(), if the host sends a data_offset
different from rbytes_done, the driver ends up calling nvmet_req_complete()
passing a status error.
The problem is that at this point cmd->req is not yet initialized,
the kernel will crash after dereferencing a NULL pointer.
Fix the bug by replacing the call to nvmet_req_complete() with
nvmet_tcp_fatal_error().
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Reviewed-by: Keith Busch <kbsuch@kernel.org>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efa56305908ba20de2104f1b8508c6a7401833be ]
If the host sends an H2CData command with an invalid DATAL,
the kernel may crash in nvmet_tcp_build_pdu_iovec().
Unable to handle kernel NULL pointer dereference at
virtual address 0000000000000000
lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp]
Call trace:
process_one_work+0x174/0x3c8
worker_thread+0x2d0/0x3e8
kthread+0x104/0x110
Fix the bug by raising a fatal error if DATAL isn't coherent
with the packet size.
Also, the PDU length should never exceed the MAXH2CDATA parameter which
has been communicated to the host in nvmet_tcp_handle_icreq().
Fixes: 872d26a391 ("nvmet-tcp: add NVMe over TCP target driver")
Signed-off-by: Maurizio Lombardi <mlombard@redhat.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Keith Busch <kbusch@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1b9f2c66eed3261db76cccd8a22a9affae8dcbf ]
After a successful vp_legacy_probe() call, vp_legacy_remove() should be
called in the error handling path, as already done in the remove function.
Add the missing call.
Fixes: e85087beed ("eni_vdpa: add vDPA driver for Alibaba ENI")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Message-Id: <a7b0ef1eabd081f1c7c894e9b11de01678e85dee.1666293559.git.christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f200fff8d019f2754f91f5d715652e3e3fdf3604 ]
Before writing the read or write command to the SPMI arbiter through the
PMIF interface, the current status of the channel is checked to ensure
it is idle. However, since the status only changes from idle when the
command is written, it is possible for two concurrent calls to determine
that the channel is idle and simultaneously send their commands. At this
point the PMIF interface hangs, with the status register no longer being
updated, and thus causing all subsequent operations to time out.
This was observed on the mt8195-cherry-tomato-r2 machine, particularly
after commit 46600ab142f8 ("regulator: Set PROBE_PREFER_ASYNCHRONOUS for
drivers between 5.10 and 5.15") was applied, since then the two MT6315
devices present on the SPMI bus would probe assynchronously and
sometimes (during probe or at a later point) read the bus
simultaneously, breaking the PMIF interface and consequently slowing
down the whole system.
To fix the issue at its root cause, introduce locking around the channel
status check and the command write, so that both become an atomic
operation, preventing race conditions between two (or more) SPMI bus
read/write operations. A spinlock is used since this is a fast bus, as
indicated by the usage of the atomic variant of readl_poll, and
'.fast_io = true' being used in the mt6315 driver, so spinlocks are
already used for the regmap access.
Fixes: b45b3ccef8 ("spmi: mediatek: Add support for MT6873/8192")
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Link: https://lore.kernel.org/r/20230724154739.493724-1-nfraprado@collabora.com
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Alexandre Mergnat <amergnat@baylibre.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Link: https://lore.kernel.org/r/20231206231733.4031901-2-sboyd@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66aad7d8d3ec5a3a8ec2023841bcec2ded5f65c9 ]
In ACM support for sending breaks to devices is optional.
If a device says that it doenot support sending breaks,
the host must respect that.
Given the number of optional features providing tty operations
for each combination is not practical and errors need to be
returned dynamically if unsupported features are requested.
In case a device does not support break, we want the tty layer
to treat that like it treats drivers that statically cannot
support sending a break. It ignores the inability and does nothing.
This patch uses EOPNOTSUPP to indicate that.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Fixes: 9e98966c7b ("tty: rework break handling")
Link: https://lore.kernel.org/r/20231207132639.18250-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 24f2cd019946fc2e88e632d2e24a34c2cc3f2be4 ]
Now, the "jumped-over" code is simple enough to be put inside an 'if'.
Do so to make it 'goto'-less.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230919085156.1578-16-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd99392b643b824813df2edbaebe26a2136d31e6 ]
msleep_interruptible() will check on its own. So no need to do the check
in send_break() before calling the above.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230919085156.1578-15-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66619686d187b4a6395316b7f39881e945dce4bc ]
If the driver sets TTY_DRIVER_HARDWARE_BREAK, we leave ops->break_ctl()
to the driver and return from send_break(). But we do it using a local
variable and keep the code flowing through the end of the function.
Instead, do 'return' immediately with the ops->break_ctl()'s return
value.
This way, we don't have to stuff the 'else' branch of the 'if' with the
software break handling. And we can re-indent the function too.
Signed-off-by: "Jiri Slaby (SUSE)" <jirislaby@kernel.org>
Link: https://lore.kernel.org/r/20230919085156.1578-14-jirislaby@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1af478903fc48c1409a8dd6b698383b62387adf1 ]
The text section starts after the ELF headers so PHDR.p_vaddr and
others should have the correct addresses.
Fixes: babd04386b ("perf jit: Include program header in ELF files")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Lieven Hey <lieven.hey@kdab.com>
Cc: Milian Wolff <milian.wolff@kdab.com>
Cc: Pablo Galindo <pablogsal@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20231212070547.612536-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bc479d665bc25a9a4e8168d5b400a47491511f9 ]
ASan complains a memory leakage in hisi_ptt_process_auxtrace_event()
that the data buffer is not freed. Since currently we only support the
raw dump trace mode, the data buffer is used only within this function.
So fix this by freeing the data buffer before going out.
Fixes: 5e91e57e68 ("perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <Namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Liu <liuqi115@huawei.com>
Link: https://lore.kernel.org/r/20231207081635.8427-3-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 813900d19b923fc1b241c1ce292472f68066092b ]
When dump the raw trace by `perf report -D` ASan reports a memory
leakage in perf_event__fprintf_event_update().
It shows that we allocated a temporary cpumap for dumping the CPUs but
doesn't release it and it's not used elsewhere. Fix this by free the
cpumap after the dumping.
Fixes: c853f9394b ("perf tools: Add perf_event__fprintf_event_update function")
Reviewed-by: Ian Rogers <irogers@google.com>
Signed-off-by: Yicong Yang <yangyicong@hisilicon.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Jonathan Cameron <jonathan.cameron@huawei.com>
Cc: Junhao He <hejunhao3@huawei.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linuxarm@huawei.com
Link: https://lore.kernel.org/r/20231207081635.8427-2-yangyicong@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b73f08bb7fe5a0901646ca5ceaa1e7a2d5ee6293 ]
When reading in_voltage_scale we can get something like:
root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale
0.038146
However, when reading the available options:
root@analog:/sys/bus/iio/devices/iio:device2# cat
in_voltage_scale_available
2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010
which does not make sense. Moreover, when trying to set a new scale we
get an error because there's no call to __ad9467_get_scale() to give us
values as given when reading in_voltage_scale. Fix it by computing the
available scales during probe and properly pass the list when
.read_available() is called.
While at it, change to use .read_available() from iio_info. Also note
that to properly fix this, adi-axi-adc.c has to be changed accordingly.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 76f028539cf360f750efd8cde560edda298e4c6b ]
The reset gpio was being handled with inverted polarity. This means that
as far as gpiolib is concerned we were actually leaving the pin asserted
(in theory, this would mean reset). However, inverting the polarity in
devicetree made things work. Fix it by doing it the proper way and how
gpiolib expects it to be done.
While at it, moved the handling to it's own function and dropped
'reset_gpio' from the 'struct ad9467_state' as we only need it during
probe. On top of that, refactored things so that we now request the gpio
asserted (i.e in reset) and then de-assert it. Also note that we now use
gpiod_set_value_cansleep() instead of gpiod_direction_output() as we
already request the pin as output.
Fixes: ad67971202 ("iio: adc: ad9467: add support AD9467 ADC")
Reviewed-by: David Lechner <dlechner@baylibre.com>
Signed-off-by: Nuno Sa <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 981cf568a8644161c2f15c02278ebc2834b51ba6 ]
When building whole selftests on arm64, rsync gives an erorr about sgx:
rsync: [sender] link_stat "/root/linux-next/tools/testing/selftests/sgx/test_encl.elf" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1327) [sender=3.2.5]
The root casue is sgx only used on X86_64, and shall be skipped on other
platforms.
Fix this by moving TEST_CUSTOM_PROGS and TEST_FILES inside the if check,
then the build result will be "Skipping non-existent dir: sgx".
Fixes: 2adcba79e6 ("selftests/x86: Add a selftest for SGX")
Signed-off-by: Zhao Mengmeng <zhaomengmeng@kylinos.cn>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231206025605.3965302-1-zhaomzhao%40126.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 853a57a43ebdb8c024160c1a0990bae85f4bcc2f ]
Add the "memory" clobber to the EMODPE and EACCEPT asm blocks to tell the
compiler the assembly code accesses to the secinfo struct. This ensures
the compiler treats the asm block as a memory barrier and the write to
secinfo will be visible to ENCLU.
Fixes: 20404a8085 ("selftests/sgx: Add test for EPCM permission changes")
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Kai Huang <kai.huang@intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231005153854.25566-4-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b84fc2e0139ba4b23b8039bd7cfd242894fe8f8b ]
Ensure sym_tab and sym_names are zero-initialized and add an early-out
condition in the unlikely (erroneous) case that the enclave ELF file would
not contain a symbol table.
This addresses -Werror=maybe-uninitialized compiler warnings for gcc -O2.
Fixes: 33c5aac3bf ("selftests/sgx: Test complete changing of page type flow")
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Link: https://lore.kernel.org/all/20231005153854.25566-3-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79eba8c924f7decfa71ddf187d38cb9f5f2cd7b3 ]
Ensure ctx is zero-initialized, such that the encl_measure function will
not call EVP_MD_CTX_destroy with an uninitialized ctx pointer in case of an
early error during key generation.
Fixes: 2adcba79e6 ("selftests/x86: Add a selftest for SGX")
Signed-off-by: Jo Van Bulck <jo.vanbulck@cs.kuleuven.be>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org>
Acked-by: Kai Huang <kai.huang@intel.com>
Link: https://lore.kernel.org/all/20231005153854.25566-2-jo.vanbulck%40cs.kuleuven.be
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78d60dae9a0c9f09aa3d6477c94047df2fe6f7b0 ]
When using the serial port as RS485 port, the tx statemachine is used to
control the RTS pin to drive the RS485 transceiver TX_EN pin. When the
TTY port is closed in the middle of a transmission (for instance during
userland application crash), imx_uart_shutdown disables the interface
and disables the Transmission Complete interrupt. afer that,
imx_uart_stop_tx bails on an incomplete transmission, to be retriggered
by the TC interrupt. This interrupt is disabled and therefore the tx
statemachine never transitions out of SEND. The statemachine is in
deadlock now, and the TX_EN remains low, making the interface useless.
imx_uart_stop_tx now checks for incomplete transmission AND whether TC
interrupts are enabled before bailing to be retriggered. This makes sure
the state machine handling is reached, and is properly set to
WAIT_AFTER_SEND.
Fixes: cb1a609236 ("serial: imx: implement rts delaying for rs485")
Signed-off-by: Paul Geurts <paul_geurts@live.nl>
Tested-by: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Tested-by: Eberhard Stoll <eberhard.stoll@gmx.de>
Link: https://lore.kernel.org/r/AM0PR09MB26758F651BC1B742EB45775995B8A@AM0PR09MB2675.eurprd09.prod.outlook.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1eaea4b3604eb9ca7d9a1e73d88fc121bb4061f5 ]
fwnode_get_property_reference_args() may not be called with args argument
NULL and while OF already supports this. Add the missing NULL check.
The purpose is to be able to count the references.
Fixes: b06184acf7 ("software node: Add software_node_get_reference_args()")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231109101010.1329587-3-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bef52aa0f3de1b7d8c258c13b16e577361dabf3a ]
fwnode_get_property_reference_args() may not be called with args argument
NULL on ACPI, OF already supports this. Add the missing NULL checks and
document this.
The purpose is to be able to count the references.
Fixes: 977d5ad39f ("ACPI: Convert ACPI reference args to generic fwnode reference args")
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20231109101010.1329587-2-sakari.ailus@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 48b5928e18dc27e05cab3dc4c78cd8a15baaf1e5 ]
The current code registers the node as available in the node array
before initializing the accessor list. This makes it so that
anything which might access the accessor list as a result of
allocations will cause an undefined memory access.
In one example, an extension to access hmat data during interleave
caused this undefined access as a result of a bulk allocation
that occurs during node initialization but before the accessor
list is initialized.
Initialize the accessor list before making the node generally
available to the global system.
Fixes: 08d9dbe72b ("node: Link memory nodes to their compute nodes")
Signed-off-by: Gregory Price <gregory.price@memverge.com>
Link: https://lore.kernel.org/r/20231030044239.971756-1-gregory.price@memverge.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit af76b2dec0984a079d8497bfa37d29a9b55932e1 ]
There are functions using __u64, so we need to have the linux/types.h
header otherwise we'll break when its not included before api/io.h.
Fixes: e95770af4c ("tools api: Add a lightweight buffered reading api")
Reviewed-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/ZWjDPL+IzPPsuC3X@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ad90d0358bd3b4554f243a425168fc7cebe7d04e ]
Returning an error code from .remove() makes the driver core emit the
little helpful error message:
remove callback returned a non-zero value. This will be ignored.
and then remove the device anyhow. So all resources that were not freed
are leaked in this case. Skipping serial8250_unregister_port() has the
potential to keep enough of the UART around to trigger a use-after-free.
So replace the error return (and with it the little helpful error
message) by a more useful error message and continue to cleanup.
Fixes: e3f0c638f4 ("serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()")
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reviewed-by: Tony Lindgren <tony@atomide.com>
Link: https://lore.kernel.org/r/20231110152927.70601-2-u.kleine-koenig@pengutronix.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b55d073e6501dc6077edaa945a6dad8ac5c8bbab ]
smatch complains that there is a buffer overflow and clang complains
'ret' is never read.
Smatch error:
drivers/power/supply/bq256xx_charger.c:1578 bq256xx_hw_init() error:
buffer overflow 'bq256xx_watchdog_time' 4 <= 4
Clang static checker:
Value stored to 'ret' is never read.
Add check for buffer overflow and error code from regmap_update_bits().
Fixes: 32e4978bb9 ("power: supply: bq256xx: Introduce the BQ256XX charger driver")
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20231116041822.1378758-1-suhui@nfschina.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f37669119423ca852ca855b24732f25c0737aa57 ]
RRT_ALRT register holds remaining battery time in minutes therefore it
needs to be scaled accordingly when exposing TIME_TO_EMPTY via sysfs
expressed in seconds
Fixes: b4c7715c10 ("power: supply: add CellWise cw2015 fuel gauge driver")
Signed-off-by: Jan Palus <jpalus@fastmail.com>
Link: https://lore.kernel.org/r/20231111221704.5579-1-jpalus@fastmail.com
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 89c4b588d11e9acf01d604de4b0c715884f59213 ]
When calling spi_register_board_info(), we should pass the number of
elements in 'db1200_spi_devs', not 'db1200_i2c_devs'.
Fixes: 63323ec54a ("MIPS: Alchemy: Extended DB1200 board support.")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5daa3726410288075ba73c336bb2e80d6b06aa4d ]
During the refactoring, a bug was introduced in the rarly used
XIP_FIXUP_FLASH_OFFSET macro.
Fixes: bee7fbc385 ("RISC-V CPU Idle Support")
Fixes: e7681beba9 ("RISC-V: Split out the XIP fixups into their own file")
Signed-off-by: Frederik Haxel <haxel@fzi.de>
Link: https://lore.kernel.org/r/20231212130116.848530-3-haxel@fzi.de
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8b2711336f03ece539de61479d6ffc44fb603d3 ]
When resetting the linear mapping permissions, we must make sure that we
clear the X bit so that do not end up with WX mappings (since we set
PAGE_KERNEL).
Fixes: 395a21ff85 ("riscv: add ARCH_HAS_SET_DIRECT_MAP support")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231213134027.155327-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 311cd2f6e25380cff0abc2884dc6a3d33bc9b5c3 ]
When STRICT_KERNEL_RWX is set, any change of permissions on any kernel
mapping (vmalloc/modules/kernel text...etc) should be applied on its
linear mapping alias. The problem is that the riscv kernel uses huge
mappings for the linear mapping and walk_page_range_novma() does not
split those huge mappings.
So this patchset implements such split in order to apply fine-grained
permissions on the linear mapping.
Below is the difference before and after (the first PUD mapping is split
into PTE/PMD mappings):
Before:
---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000 0x0000000080080000 1536K PTE D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000 0x0000000080200000 1914M PMD D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000 0x00000000f7c00000 12M PMD D A G . . . R V
0xffffaf8078800000-0xffffaf8078c00000 0x00000000f8800000 4M PMD D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000 0x00000000f8c00000 6M PMD D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000 0x00000000f9200000 84M PMD D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000 0x00000000fe600000 1112K PTE D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000 0x00000000fe717000 12K PTE D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000 0x00000000fe71d000 4K PTE D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000 0x00000000fe722000 888K PTE D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000 0x00000000fe800000 22M PMD D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000 0x00000000ffe00000 1360K PTE D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000 0x00000000fff55000 684K PTE D A G . . W R V
0xffffaf8080000000-0xffffaf8400000000 0x0000000100000000 14G PUD D A G . . W R V
After:
---[ Linear mapping ]---
0xffffaf8000080000-0xffffaf8000200000 0x0000000080080000 1536K PTE D A G . . W R V
0xffffaf8000200000-0xffffaf8077c00000 0x0000000080200000 1914M PMD D A G . . W R V
0xffffaf8077c00000-0xffffaf8078800000 0x00000000f7c00000 12M PMD D A G . . . R V
0xffffaf8078800000-0xffffaf8078a00000 0x00000000f8800000 2M PMD D A G . . W R V
0xffffaf8078a00000-0xffffaf8078c00000 0x00000000f8a00000 2M PTE D A G . . W R V
0xffffaf8078c00000-0xffffaf8079200000 0x00000000f8c00000 6M PMD D A G . . . R V
0xffffaf8079200000-0xffffaf807e600000 0x00000000f9200000 84M PMD D A G . . W R V
0xffffaf807e600000-0xffffaf807e716000 0x00000000fe600000 1112K PTE D A G . . W R V
0xffffaf807e717000-0xffffaf807e71a000 0x00000000fe717000 12K PTE D A G . . W R V
0xffffaf807e71d000-0xffffaf807e71e000 0x00000000fe71d000 4K PTE D A G . . W R V
0xffffaf807e722000-0xffffaf807e800000 0x00000000fe722000 888K PTE D A G . . W R V
0xffffaf807e800000-0xffffaf807fe00000 0x00000000fe800000 22M PMD D A G . . W R V
0xffffaf807fe00000-0xffffaf807ff54000 0x00000000ffe00000 1360K PTE D A G . . W R V
0xffffaf807ff55000-0xffffaf8080000000 0x00000000fff55000 684K PTE D A G . . W R V
0xffffaf8080000000-0xffffaf8080800000 0x0000000100000000 8M PMD D A G . . W R V
0xffffaf8080800000-0xffffaf8080af6000 0x0000000100800000 3032K PTE D A G . . W R V
0xffffaf8080af6000-0xffffaf8080af8000 0x0000000100af6000 8K PTE D A G . X . R V
0xffffaf8080af8000-0xffffaf8080c00000 0x0000000100af8000 1056K PTE D A G . . W R V
0xffffaf8080c00000-0xffffaf8081a00000 0x0000000100c00000 14M PMD D A G . . W R V
0xffffaf8081a00000-0xffffaf8081a40000 0x0000000101a00000 256K PTE D A G . . W R V
0xffffaf8081a40000-0xffffaf8081a44000 0x0000000101a40000 16K PTE D A G . X . R V
0xffffaf8081a44000-0xffffaf8081a52000 0x0000000101a44000 56K PTE D A G . . W R V
0xffffaf8081a52000-0xffffaf8081a54000 0x0000000101a52000 8K PTE D A G . X . R V
...
0xffffaf809e800000-0xffffaf80c0000000 0x000000011e800000 536M PMD D A G . . W R V
0xffffaf80c0000000-0xffffaf8400000000 0x0000000140000000 13G PUD D A G . . W R V
Note that this also fixes memfd_secret() syscall which uses
set_direct_map_invalid_noflush() and set_direct_map_default_noflush() to
remove the pages from the linear mapping. Below is the kernel page table
while a memfd_secret() syscall is running, you can see all the !valid
page table entries in the linear mapping:
...
0xffffaf8082240000-0xffffaf8082241000 0x0000000102240000 4K PTE D A G . . W R .
0xffffaf8082241000-0xffffaf8082250000 0x0000000102241000 60K PTE D A G . . W R V
0xffffaf8082250000-0xffffaf8082252000 0x0000000102250000 8K PTE D A G . . W R .
0xffffaf8082252000-0xffffaf8082256000 0x0000000102252000 16K PTE D A G . . W R V
0xffffaf8082256000-0xffffaf8082257000 0x0000000102256000 4K PTE D A G . . W R .
0xffffaf8082257000-0xffffaf8082258000 0x0000000102257000 4K PTE D A G . . W R V
0xffffaf8082258000-0xffffaf8082259000 0x0000000102258000 4K PTE D A G . . W R .
0xffffaf8082259000-0xffffaf808225a000 0x0000000102259000 4K PTE D A G . . W R V
0xffffaf808225a000-0xffffaf808225c000 0x000000010225a000 8K PTE D A G . . W R .
0xffffaf808225c000-0xffffaf8082266000 0x000000010225c000 40K PTE D A G . . W R V
0xffffaf8082266000-0xffffaf8082268000 0x0000000102266000 8K PTE D A G . . W R .
0xffffaf8082268000-0xffffaf8082284000 0x0000000102268000 112K PTE D A G . . W R V
0xffffaf8082284000-0xffffaf8082288000 0x0000000102284000 16K PTE D A G . . W R .
0xffffaf8082288000-0xffffaf808229c000 0x0000000102288000 80K PTE D A G . . W R V
0xffffaf808229c000-0xffffaf80822a0000 0x000000010229c000 16K PTE D A G . . W R .
0xffffaf80822a0000-0xffffaf80822a5000 0x00000001022a0000 20K PTE D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000 0x00000001022a5000 4K PTE D A G . . . R V
0xffffaf80822a6000-0xffffaf80822ab000 0x00000001022a6000 20K PTE D A G . . W R V
...
And when the memfd_secret() fd is released, the linear mapping is
correctly reset:
...
0xffffaf8082240000-0xffffaf80822a5000 0x0000000102240000 404K PTE D A G . . W R V
0xffffaf80822a5000-0xffffaf80822a6000 0x00000001022a5000 4K PTE D A G . . . R V
0xffffaf80822a6000-0xffffaf80822af000 0x00000001022a6000 36K PTE D A G . . W R V
...
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231108075930.7157-3-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Stable-dep-of: b8b2711336f0 ("riscv: Fix set_direct_map_default_noflush() to reset _PAGE_EXEC")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 749b94b08005929bbc636df21a23322733166e35 ]
After unloading a module, we must reset the linear mapping permissions,
see the example below:
Before unloading a module:
0xffffaf809d65d000-0xffffaf809d6dc000 0x000000011d65d000 508K PTE . .. .. D A G . . W R V
0xffffaf809d6dc000-0xffffaf809d6dd000 0x000000011d6dc000 4K PTE . .. .. D A G . . . R V
0xffffaf809d6dd000-0xffffaf809d6e1000 0x000000011d6dd000 16K PTE . .. .. D A G . . W R V
0xffffaf809d6e1000-0xffffaf809d6e7000 0x000000011d6e1000 24K PTE . .. .. D A G . X . R V
After unloading a module:
0xffffaf809d65d000-0xffffaf809d6e1000 0x000000011d65d000 528K PTE . .. .. D A G . . W R V
0xffffaf809d6e1000-0xffffaf809d6e7000 0x000000011d6e1000 24K PTE . .. .. D A G . X W R V
The last mapping is not reset and we end up with WX mappings in the linear
mapping.
So add VM_FLUSH_RESET_PERMS to our module_alloc() definition.
Fixes: 0cff8bff7a ("riscv: avoid the PIC offset of static percpu data in module beyond 2G limits")
Signed-off-by: Alexandre Ghiti <alexghiti@rivosinc.com>
Link: https://lore.kernel.org/r/20231213134027.155327-2-alexghiti@rivosinc.com
Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
