Merge tag 'tags/bcm2835-dt-fixes-2021-10-06' into devicetree/fixes

A series of devicetree fixes for the Raspberry Pi 4:

- Fix VEC reg address
- Fix MDIO address/size cells
- Fix regulator states
- Fix PCIe address formatting

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>

arch/arm/boot/dts/bcm2711-rpi-4-b.dts

@@ -40,8 +40,8 @@
 		regulator-always-on;
 		regulator-settling-time-us = <5000>;
 		gpios = <&expgpio 4 GPIO_ACTIVE_HIGH>;
-		states = <1800000 0x1
-			  3300000 0x0>;
+		states = <1800000 0x1>,
+			 <3300000 0x0>;
 		status = "okay";
 	};
 
@@ -217,15 +217,16 @@
 };
 
 &pcie0 {
-	pci@1,0 {
+	pci@0,0 {
+		device_type = "pci";
 		#address-cells = <3>;
 		#size-cells = <2>;
 		ranges;
 
 		reg = <0 0 0 0 0>;
 
-		usb@1,0 {
-			reg = <0x10000 0 0 0 0>;
+		usb@0,0 {
+			reg = <0 0 0 0 0>;
 			resets = <&reset RASPBERRYPI_FIRMWARE_RESET_ID_USB>;
 		};
 	};

arch/arm/boot/dts/bcm2711.dtsi

@@ -300,6 +300,14 @@
 			status = "disabled";
 		};
 
+		vec: vec@7ec13000 {
+			compatible = "brcm,bcm2711-vec";
+			reg = <0x7ec13000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+			status = "disabled";
+		};
+
 		dvp: clock@7ef00000 {
 			compatible = "brcm,brcm2711-dvp";
 			reg = <0x7ef00000 0x10>;
@@ -532,8 +540,8 @@
 				compatible = "brcm,genet-mdio-v5";
 				reg = <0xe14 0x8>;
 				reg-names = "mdio";
-				#address-cells = <0x0>;
-				#size-cells = <0x1>;
+				#address-cells = <0x1>;
+				#size-cells = <0x0>;
 			};
 		};
 	};

arch/arm/boot/dts/bcm2835-common.dtsi

@@ -106,6 +106,14 @@
 			status = "okay";
 		};
 
+		vec: vec@7e806000 {
+			compatible = "brcm,bcm2835-vec";
+			reg = <0x7e806000 0x1000>;
+			clocks = <&clocks BCM2835_CLOCK_VEC>;
+			interrupts = <2 27>;
+			status = "disabled";
+		};
+
 		pixelvalve@7e807000 {
 			compatible = "brcm,bcm2835-pixelvalve2";
 			reg = <0x7e807000 0x100>;

arch/arm/boot/dts/bcm283x.dtsi

@@ -464,14 +464,6 @@
 			status = "disabled";
 		};
 
-		vec: vec@7e806000 {
-			compatible = "brcm,bcm2835-vec";
-			reg = <0x7e806000 0x1000>;
-			clocks = <&clocks BCM2835_CLOCK_VEC>;
-			interrupts = <2 27>;
-			status = "disabled";
-		};
-
 		usb: usb@7e980000 {
 			compatible = "brcm,bcm2835-usb";
 			reg = <0x7e980000 0x10000>;