android/android_kernel_samsung_sm8650
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

ath9k: Whitespace cleanup

Browse Source 
Also, remove comments that are not relevant anymore.

Signed-off-by: Sujith <Sujith.Manoharan@atheros.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
This commit is contained in:
Sujith
2008-09-17 10:15:09 +05:30
committed by John W. Linville
parent 42eb7c644a
commit 980b24da6f
1 changed files with 60 additions and 76 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

136
drivers/net/wireless/ath9k/beacon.c
View File

@ -26,7 +26,6 @@
* the operating mode of the station (AP or AdHoc). Parameters are AIFS
* settings and channel width min/max
*/
static int ath_beaconq_config(struct ath_softc *sc)
{
struct ath_hal *ah = sc->sc_ah;
@ -63,19 +62,18 @@ static int ath_beaconq_config(struct ath_softc *sc)
* up all required antenna switch parameters, rate codes, and channel flags.
* Beacons are always sent out at the lowest rate, and are not retried.
*/
static void ath_beacon_setup(struct ath_softc *sc,
struct ath_vap *avp, struct ath_buf *bf)
struct ath_vap *avp, struct ath_buf *bf)
{
struct sk_buff *skb = (struct sk_buff *)bf->bf_mpdu;
struct ath_hal *ah = sc->sc_ah;
struct ath_desc *ds;
int flags, antenna;
struct ath9k_11n_rate_series series[4];
const struct ath9k_rate_table *rt;
int flags, antenna;
u8 rix, rate;
int ctsrate = 0;
int ctsduration = 0;
struct ath9k_11n_rate_series series[4];
DPRINTF(sc, ATH_DBG_BEACON, "%s: m %p len %u\n",
__func__, skb, skb->len);
@ -115,20 +113,21 @@ static void ath_beacon_setup(struct ath_softc *sc,
rate |= rt->info[rix].shortPreamble;
ath9k_hw_set11n_txdesc(ah, ds,
skb->len + FCS_LEN, /* frame length */
ATH9K_PKT_TYPE_BEACON, /* Atheros packet type */
skb->len + FCS_LEN, /* frame length */
ATH9K_PKT_TYPE_BEACON, /* Atheros packet type */
avp->av_btxctl.txpower, /* txpower XXX */
ATH9K_TXKEYIX_INVALID, /* no encryption */
ATH9K_KEY_TYPE_CLEAR, /* no encryption */
flags /* no ack, veol for beacons */
ATH9K_TXKEYIX_INVALID, /* no encryption */
ATH9K_KEY_TYPE_CLEAR, /* no encryption */
flags /* no ack,
veol for beacons */
);
/* NB: beacon's BufLen must be a multiple of 4 bytes */
ath9k_hw_filltxdesc(ah, ds,
roundup(skb->len, 4), /* buffer length */
true, /* first segment */
true, /* last segment */
ds /* first descriptor */
true, /* first segment */
true, /* last segment */
ds /* first descriptor */
);
memzero(series, sizeof(struct ath9k_11n_rate_series) * 4);
@ -153,22 +152,23 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
struct ath_buf *bf;
struct ath_vap *avp;
struct sk_buff *skb;
int cabq_depth;
struct ath_txq *cabq;
struct ieee80211_tx_info *info;
int cabq_depth;
avp = sc->sc_vaps[if_id];
ASSERT(avp);
cabq = sc->sc_cabq;
ASSERT(avp);
if (avp->av_bcbuf == NULL) {
DPRINTF(sc, ATH_DBG_BEACON, "%s: avp=%p av_bcbuf=%p\n",
__func__, avp, avp->av_bcbuf);
return NULL;
}
bf = avp->av_bcbuf;
skb = (struct sk_buff *) bf->bf_mpdu;
skb = (struct sk_buff *)bf->bf_mpdu;
if (skb) {
pci_unmap_single(sc->pdev, bf->bf_dmacontext,
skb_end_pointer(skb) - skb->head,
@ -179,17 +179,19 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
bf->bf_mpdu = skb;
if (skb == NULL)
return NULL;
info = IEEE80211_SKB_CB(skb);
if (info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) {
/*
* TODO: make sure the seq# gets assigned properly (vs. other
* TX frames)
*/
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *) skb->data;
struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data;
sc->seq_no += 0x10;
hdr->seq_ctrl &= cpu_to_le16(IEEE80211_SCTL_FRAG);
hdr->seq_ctrl |= cpu_to_le16(sc->seq_no);
}
bf->bf_buf_addr = bf->bf_dmacontext =
pci_map_single(sc->pdev, skb->data,
skb_end_pointer(skb) - skb->head,
@ -241,7 +243,6 @@ static struct ath_buf *ath_beacon_generate(struct ath_softc *sc, int if_id)
* Startup beacon transmission for adhoc mode when they are sent entirely
* by the hardware using the self-linked descriptor + veol trick.
*/
static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
{
struct ath_hal *ah = sc->sc_ah;
@ -278,7 +279,6 @@ static void ath_beacon_start_adhoc(struct ath_softc *sc, int if_id)
* min/max, and enable aifs). The info structure does not need to be
* persistant.
*/
int ath_beaconq_setup(struct ath_hal *ah)
{
struct ath9k_tx_queue_info qi;
@ -299,11 +299,10 @@ int ath_beaconq_setup(struct ath_hal *ah)
* the ATH interface. This routine also calculates the beacon "slot" for
* staggared beacons in the mBSSID case.
*/
int ath_beacon_alloc(struct ath_softc *sc, int if_id)
{
struct ath_vap *avp;
struct ieee80211_hdr *wh;
struct ieee80211_hdr *hdr;
struct ath_buf *bf;
struct sk_buff *skb;
@ -312,13 +311,11 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
/* Allocate a beacon descriptor if we haven't done so. */
if (!avp->av_bcbuf) {
/*
* Allocate beacon state for hostap/ibss. We know
* a buffer is available.
*/
/* Allocate beacon state for hostap/ibss. We know
* a buffer is available. */
avp->av_bcbuf = list_first_entry(&sc->sc_bbuf,
struct ath_buf, list);
struct ath_buf, list);
list_del(&avp->av_bcbuf->list);
if (sc->sc_ah->ah_opmode == ATH9K_M_HOSTAP ||
@ -362,9 +359,7 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
}
/*
* NB: the beacon data buffer must be 32-bit aligned;
* we assume the wbuf routines will return us something
* with this alignment (perhaps should assert).
* NB: the beacon data buffer must be 32-bit aligned.
* FIXME: Fill avp->av_btxctl.txpower and
* avp->av_btxctl.shortPreamble
*/
@ -408,8 +403,8 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
__func__, "stagger",
avp->av_bslot, intval, (unsigned long long)tsfadjust);
wh = (struct ieee80211_hdr *)skb->data;
memcpy(&wh[1], &val, sizeof(val));
hdr = (struct ieee80211_hdr *)skb->data;
memcpy(&hdr[1], &val, sizeof(val));
}
bf->bf_buf_addr = bf->bf_dmacontext =
@ -425,9 +420,8 @@ int ath_beacon_alloc(struct ath_softc *sc, int if_id)
* Reclaim beacon resources and return buffer to the pool.
*
* Checks the VAP to put the beacon frame buffer back to the ATH object
* queue, and de-allocates any wbuf frames that were sent as CAB traffic.
* queue, and de-allocates any skbs that were sent as CAB traffic.
*/
void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
{
if (avp->av_bcbuf != NULL) {
@ -459,10 +453,7 @@ void ath_beacon_return(struct ath_softc *sc, struct ath_vap *avp)
* Transmit one or more beacon frames at SWBA. Dynamic updates to the frame
* contents are done as needed and the slot time is also adjusted based on
* current state.
*
* This tasklet is not scheduled, it's called in ISR context.
*/
void ath9k_beacon_tasklet(unsigned long data)
{
struct ath_softc *sc = (struct ath_softc *)data;
@ -490,6 +481,8 @@ void ath9k_beacon_tasklet(unsigned long data)
* and wait for the next. Missed beacons indicate
* a problem and should not occur. If we miss too
* many consecutive beacons reset the device.
*
* FIXME: Clean up this mess !!
*/
if (ath9k_hw_numtxpending(ah, sc->sc_bhalq) != 0) {
sc->sc_bmisscount++;
@ -505,19 +498,16 @@ void ath9k_beacon_tasklet(unsigned long data)
__func__, sc->sc_bmisscount);
if (show_cycles) {
/*
* Display cycle counter stats
* from HW to aide in debug of
* stickiness.
* Display cycle counter stats from HW
* to aide in debug of stickiness.
*/
DPRINTF(sc,
ATH_DBG_BEACON,
DPRINTF(sc, ATH_DBG_BEACON,
"%s: busy times: rx_clear=%d, "
"rx_frame=%d, tx_frame=%d\n",
__func__, rx_clear, rx_frame,
tx_frame);
} else {
DPRINTF(sc,
ATH_DBG_BEACON,
DPRINTF(sc, ATH_DBG_BEACON,
"%s: unable to obtain "
"busy times\n", __func__);
}
@ -529,8 +519,7 @@ void ath9k_beacon_tasklet(unsigned long data)
} else if (sc->sc_bmisscount >= BSTUCK_THRESH) {
if (sc->sc_flags & SC_OP_NO_RESET) {
if (sc->sc_bmisscount == BSTUCK_THRESH) {
DPRINTF(sc,
ATH_DBG_BEACON,
DPRINTF(sc, ATH_DBG_BEACON,
"%s: beacon is officially "
"stuck\n", __func__);
ath9k_hw_dmaRegDump(ah);
@ -542,13 +531,12 @@ void ath9k_beacon_tasklet(unsigned long data)
ath_bstuck_process(sc);
}
}
return;
}
if (sc->sc_bmisscount != 0) {
if (sc->sc_flags & SC_OP_NO_RESET) {
DPRINTF(sc,
ATH_DBG_BEACON,
DPRINTF(sc, ATH_DBG_BEACON,
"%s: resume beacon xmit after %u misses\n",
__func__, sc->sc_bmisscount);
} else {
@ -572,10 +560,12 @@ void ath9k_beacon_tasklet(unsigned long data)
tsftu = TSF_TO_TU(tsf>>32, tsf);
slot = ((tsftu % intval) * ATH_BCBUF) / intval;
if_id = sc->sc_bslot[(slot + 1) % ATH_BCBUF];
DPRINTF(sc, ATH_DBG_BEACON,
"%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n",
__func__, slot, (unsigned long long) tsf, tsftu,
intval, if_id);
"%s: slot %d [tsf %llu tsftu %u intval %u] if_id %d\n",
__func__, slot, (unsigned long long)tsf, tsftu,
intval, if_id);
bfaddr = 0;
if (if_id != ATH_IF_ID_ANY) {
bf = ath_beacon_generate(sc, if_id);
@ -632,9 +622,8 @@ void ath9k_beacon_tasklet(unsigned long data)
* Tasklet for Beacon Stuck processing
*
* Processing for Beacon Stuck.
* Basically calls the ath_internal_reset function to reset the chip.
* Basically resets the chip.
*/
void ath_bstuck_process(struct ath_softc *sc)
{
DPRINTF(sc, ATH_DBG_BEACON,
@ -658,13 +647,12 @@ void ath_bstuck_process(struct ath_softc *sc)
* interrupt when we stop seeing beacons from the AP
* we've associated with.
*/
void ath_beacon_config(struct ath_softc *sc, int if_id)
{
struct ath_hal *ah = sc->sc_ah;
u32 nexttbtt, intval;
struct ath_beacon_config conf;
enum ath9k_opmode av_opmode;
u32 nexttbtt, intval;
if (if_id != ATH_IF_ID_ANY)
av_opmode = sc->sc_vaps[if_id]->av_opmode;
@ -673,12 +661,6 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
memzero(&conf, sizeof(struct ath_beacon_config));
/* FIXME: Use default values for now - Sujith */
/* Query beacon configuration first */
/*
* Protocol stack doesn't support dynamic beacon configuration,
* use default configurations.
*/
conf.beacon_interval = sc->hw->conf.beacon_int ?
sc->hw->conf.beacon_int : ATH_DEFAULT_BINTVAL;
conf.listen_interval = 1;
@ -704,12 +686,14 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
intval = conf.beacon_interval & ATH9K_BEACON_PERIOD;
}
if (nexttbtt == 0) /* e.g. for ap mode */
if (nexttbtt == 0) /* e.g. for ap mode */
nexttbtt = intval;
else if (intval) /* NB: can be 0 for monitor mode */
else if (intval) /* NB: can be 0 for monitor mode */
nexttbtt = roundup(nexttbtt, intval);
DPRINTF(sc, ATH_DBG_BEACON, "%s: nexttbtt %u intval %u (%u)\n",
__func__, nexttbtt, intval, conf.beacon_interval);
/* Check for ATH9K_M_HOSTAP and sc_nostabeacons for WDS client */
if (sc->sc_ah->ah_opmode == ATH9K_M_STA) {
struct ath9k_beacon_state bs;
@ -723,19 +707,19 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
* last beacon we received (which may be none).
*/
dtimperiod = conf.dtim_period;
if (dtimperiod <= 0) /* NB: 0 if not known */
if (dtimperiod <= 0) /* NB: 0 if not known */
dtimperiod = 1;
dtimcount = conf.dtim_count;
if (dtimcount >= dtimperiod) /* NB: sanity check */
dtimcount = 0; /* XXX? */
cfpperiod = 1; /* NB: no PCF support yet */
if (dtimcount >= dtimperiod) /* NB: sanity check */
dtimcount = 0;
cfpperiod = 1; /* NB: no PCF support yet */
cfpcount = 0;
sleepduration = conf.listen_interval * intval;
if (sleepduration <= 0)
sleepduration = intval;
#define FUDGE 2
#define FUDGE 2
/*
* Pull nexttbtt forward to reflect the current
* TSF and calculate dtim+cfp state for the result.
@ -759,6 +743,7 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
bs.bs_cfpperiod = cfpperiod*bs.bs_dtimperiod;
bs.bs_cfpnext = bs.bs_nextdtim + cfpcount*bs.bs_dtimperiod;
bs.bs_cfpmaxduration = 0;
/*
* Calculate the number of consecutive beacons to miss
* before taking a BMISS interrupt. The configuration
@ -767,9 +752,8 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
* result to at most 15 beacons.
*/
if (sleepduration > intval) {
bs.bs_bmissthreshold =
conf.listen_interval *
ATH_DEFAULT_BMISS_LIMIT / 2;
bs.bs_bmissthreshold = conf.listen_interval *
ATH_DEFAULT_BMISS_LIMIT / 2;
} else {
bs.bs_bmissthreshold =
DIV_ROUND_UP(conf.bmiss_timeout, intval);
@ -789,8 +773,8 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
* XXX fixed at 100ms
*/
bs.bs_sleepduration =
roundup(IEEE80211_MS_TO_TU(100), sleepduration);
bs.bs_sleepduration = roundup(IEEE80211_MS_TO_TU(100),
sleepduration);
if (bs.bs_sleepduration > bs.bs_dtimperiod)
bs.bs_sleepduration = bs.bs_dtimperiod;
@ -834,9 +818,9 @@ void ath_beacon_config(struct ath_softc *sc, int if_id)
if (sc->sc_ah->ah_opmode == ATH9K_M_IBSS) {
/*
* Pull nexttbtt forward to reflect the current
* TSF .
* TSF
*/
#define FUDGE 2
#define FUDGE 2
if (!(intval & ATH9K_BEACON_RESET_TSF)) {
tsf = ath9k_hw_gettsf64(ah);
tsftu = TSF_TO_TU((u32)(tsf>>32),