phy: qcom: Add UFS PHY driver snapshot for monaco_auto
Add Waipio UFS phy driver snapshot from msm-5.10 'commit acc26f639df1
("drivers: phy: ufs: Add ufs phy for Waipio SoC")'.
Add phy-qcom-ufs-qmp-v4-waipio.ko for other targets as it is
compiled under a generic config CONFIG_PHY_QCOM_UFS_V4.
Change-Id: If6e00b290eecb7d6f8db51a126ed82d071d08b4d
Signed-off-by: Shazad Hussain <quic_shazhuss@quicinc.com>
This commit is contained in:
Shazad Hussain
parent
50a530fb96
commit
78f491508c
@ -83,6 +83,7 @@ def define_blair():
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-blair.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-kalama.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-pineapple.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qrbtc-sdm845.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-blair.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-msm.ko",
|
||||
|
||||
@ -6,7 +6,7 @@ obj-$(CONFIG_PHY_QCOM_IPQ4019_USB) += phy-qcom-ipq4019-usb.o
|
||||
obj-$(CONFIG_PHY_QCOM_IPQ806X_SATA) += phy-qcom-ipq806x-sata.o
|
||||
obj-$(CONFIG_PHY_QCOM_PCIE2) += phy-qcom-pcie2.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS) += phy-qcom-ufs.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS_V4) += phy-qcom-ufs-qmp-v4-kalama.o phy-qcom-ufs-qmp-v4-pineapple.o phy-qcom-ufs-qmp-v4.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS_V4) += phy-qcom-ufs-qmp-v4-kalama.o phy-qcom-ufs-qmp-v4-pineapple.o phy-qcom-ufs-qmp-v4.o phy-qcom-ufs-qmp-v4-waipio.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS_QRBTC_SDM845) += phy-qcom-ufs-qrbtc-sdm845.o
|
||||
obj-$(CONFIG_PHY_QCOM_UFS_V4_SM6375) += phy-qcom-ufs-qmp-v4-blair.o
|
||||
|
||||
|
||||
321
drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.c
Normal file
321
drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.c
Normal file
@ -0,0 +1,321 @@
|
||||
// SPDX-License-Identifier: GPL-2.0-only
|
||||
/*
|
||||
* Copyright (c) 2021, Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#include "phy-qcom-ufs-qmp-v4-waipio.h"
|
||||
|
||||
#define UFS_PHY_NAME "ufs_phy_qmp_v4_waipio"
|
||||
|
||||
static inline void ufs_qcom_phy_qmp_v4_start_serdes(struct ufs_qcom_phy *phy);
|
||||
static int ufs_qcom_phy_qmp_v4_is_pcs_ready(struct ufs_qcom_phy *phy_common);
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_phy_calibrate(struct phy *generic_phy)
|
||||
{
|
||||
struct ufs_qcom_phy *ufs_qcom_phy = get_ufs_qcom_phy(generic_phy);
|
||||
struct device *dev = ufs_qcom_phy->dev;
|
||||
bool is_g4, is_rate_B;
|
||||
int err;
|
||||
|
||||
err = reset_control_assert(ufs_qcom_phy->ufs_reset);
|
||||
if (err) {
|
||||
dev_err(dev, "Failed to assert UFS PHY reset %d\n", err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* For UFS PHY's submode, 1 = G4, 0 = non-G4 */
|
||||
is_g4 = !!ufs_qcom_phy->submode;
|
||||
is_rate_B = (ufs_qcom_phy->mode == PHY_MODE_UFS_HS_B) ? true : false;
|
||||
|
||||
writel_relaxed(0x01, ufs_qcom_phy->mmio + UFS_PHY_SW_RESET);
|
||||
/* Ensure PHY is in reset before writing PHY calibration data */
|
||||
wmb();
|
||||
/*
|
||||
* Writing PHY calibration in this order:
|
||||
* 1. Write Rate-A calibration first (1-lane mode).
|
||||
* 2. Write 2nd lane configuration if needed.
|
||||
* 3. Write Rate-B calibration overrides
|
||||
*/
|
||||
if (is_g4) {
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy, phy_cal_table_rate_A,
|
||||
ARRAY_SIZE(phy_cal_table_rate_A));
|
||||
if (ufs_qcom_phy->lanes_per_direction == 2)
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy,
|
||||
phy_cal_table_2nd_lane,
|
||||
ARRAY_SIZE(phy_cal_table_2nd_lane));
|
||||
} else {
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy, phy_cal_table_rate_A_no_g4,
|
||||
ARRAY_SIZE(phy_cal_table_rate_A_no_g4));
|
||||
if (ufs_qcom_phy->lanes_per_direction == 2)
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy,
|
||||
phy_cal_table_2nd_lane_no_g4,
|
||||
ARRAY_SIZE(phy_cal_table_2nd_lane_no_g4));
|
||||
}
|
||||
if (is_rate_B)
|
||||
ufs_qcom_phy_write_tbl(ufs_qcom_phy, phy_cal_table_rate_B,
|
||||
ARRAY_SIZE(phy_cal_table_rate_B));
|
||||
|
||||
writel_relaxed(0x00, ufs_qcom_phy->mmio + UFS_PHY_SW_RESET);
|
||||
/* flush buffered writes */
|
||||
wmb();
|
||||
|
||||
err = reset_control_deassert(ufs_qcom_phy->ufs_reset);
|
||||
if (err) {
|
||||
dev_err(dev, "Failed to deassert UFS PHY reset %d\n", err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
ufs_qcom_phy_qmp_v4_start_serdes(ufs_qcom_phy);
|
||||
|
||||
err = ufs_qcom_phy_qmp_v4_is_pcs_ready(ufs_qcom_phy);
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_init(struct phy *generic_phy)
|
||||
{
|
||||
struct ufs_qcom_phy_qmp_v4 *phy = phy_get_drvdata(generic_phy);
|
||||
struct ufs_qcom_phy *phy_common = &phy->common_cfg;
|
||||
int err;
|
||||
|
||||
err = ufs_qcom_phy_init_clks(phy_common);
|
||||
if (err) {
|
||||
dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_clks() failed %d\n",
|
||||
__func__, err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
err = ufs_qcom_phy_init_vregulators(phy_common);
|
||||
if (err) {
|
||||
dev_err(phy_common->dev, "%s: ufs_qcom_phy_init_vregulators() failed %d\n",
|
||||
__func__, err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
/* Optional */
|
||||
ufs_qcom_phy_get_reset(phy_common);
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_exit(struct phy *generic_phy)
|
||||
{
|
||||
return 0;
|
||||
}
|
||||
|
||||
static
|
||||
int ufs_qcom_phy_qmp_v4_set_mode(struct phy *generic_phy,
|
||||
enum phy_mode mode, int submode)
|
||||
{
|
||||
struct ufs_qcom_phy *phy_common = get_ufs_qcom_phy(generic_phy);
|
||||
|
||||
phy_common->mode = PHY_MODE_INVALID;
|
||||
|
||||
if (mode > 0)
|
||||
phy_common->mode = mode;
|
||||
|
||||
phy_common->submode = submode;
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
static inline
|
||||
void ufs_qcom_phy_qmp_v4_tx_pull_down_ctrl(struct ufs_qcom_phy *phy,
|
||||
bool enable)
|
||||
{
|
||||
u32 temp;
|
||||
|
||||
temp = readl_relaxed(phy->mmio + QSERDES_RX0_RX_INTERFACE_MODE);
|
||||
if (enable)
|
||||
temp |= QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT;
|
||||
else
|
||||
temp &= ~QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT;
|
||||
writel_relaxed(temp, phy->mmio + QSERDES_RX0_RX_INTERFACE_MODE);
|
||||
|
||||
if (phy->lanes_per_direction == 1)
|
||||
goto out;
|
||||
|
||||
temp = readl_relaxed(phy->mmio + QSERDES_RX1_RX_INTERFACE_MODE);
|
||||
if (enable)
|
||||
temp |= QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT;
|
||||
else
|
||||
temp &= ~QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT;
|
||||
writel_relaxed(temp, phy->mmio + QSERDES_RX1_RX_INTERFACE_MODE);
|
||||
|
||||
out:
|
||||
/* ensure register value is committed */
|
||||
mb();
|
||||
}
|
||||
|
||||
static
|
||||
void ufs_qcom_phy_qmp_v4_power_control(struct ufs_qcom_phy *phy,
|
||||
bool power_ctrl)
|
||||
{
|
||||
if (!power_ctrl) {
|
||||
/* apply analog power collapse */
|
||||
writel_relaxed(0x0, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
|
||||
/*
|
||||
* Make sure that PHY knows its analog rail is going to be
|
||||
* powered OFF.
|
||||
*/
|
||||
mb();
|
||||
ufs_qcom_phy_qmp_v4_tx_pull_down_ctrl(phy, true);
|
||||
} else {
|
||||
ufs_qcom_phy_qmp_v4_tx_pull_down_ctrl(phy, false);
|
||||
/* bring PHY out of analog power collapse */
|
||||
writel_relaxed(0x1, phy->mmio + UFS_PHY_POWER_DOWN_CONTROL);
|
||||
|
||||
/*
|
||||
* Before any transactions involving PHY, ensure PHY knows
|
||||
* that it's analog rail is powered ON.
|
||||
*/
|
||||
mb();
|
||||
}
|
||||
}
|
||||
|
||||
static inline
|
||||
void ufs_qcom_phy_qmp_v4_set_tx_lane_enable(struct ufs_qcom_phy *phy, u32 val)
|
||||
{
|
||||
/*
|
||||
* v4 PHY does not have TX_LANE_ENABLE register.
|
||||
* Implement this function so as not to propagate error to caller.
|
||||
*/
|
||||
}
|
||||
|
||||
static
|
||||
void ufs_qcom_phy_qmp_v4_ctrl_rx_linecfg(struct ufs_qcom_phy *phy, bool ctrl)
|
||||
{
|
||||
u32 temp;
|
||||
|
||||
temp = readl_relaxed(phy->mmio + UFS_PHY_LINECFG_DISABLE);
|
||||
|
||||
if (ctrl) /* enable RX LineCfg */
|
||||
temp &= ~UFS_PHY_RX_LINECFG_DISABLE_BIT;
|
||||
else /* disable RX LineCfg */
|
||||
temp |= UFS_PHY_RX_LINECFG_DISABLE_BIT;
|
||||
|
||||
writel_relaxed(temp, phy->mmio + UFS_PHY_LINECFG_DISABLE);
|
||||
/* make sure that RX LineCfg config applied before we return */
|
||||
mb();
|
||||
}
|
||||
|
||||
static inline void ufs_qcom_phy_qmp_v4_start_serdes(struct ufs_qcom_phy *phy)
|
||||
{
|
||||
u32 tmp;
|
||||
|
||||
tmp = readl_relaxed(phy->mmio + UFS_PHY_PHY_START);
|
||||
tmp &= ~MASK_SERDES_START;
|
||||
tmp |= (1 << OFFSET_SERDES_START);
|
||||
writel_relaxed(tmp, phy->mmio + UFS_PHY_PHY_START);
|
||||
/* Ensure register value is committed */
|
||||
mb();
|
||||
}
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_is_pcs_ready(struct ufs_qcom_phy *phy_common)
|
||||
{
|
||||
int err = 0;
|
||||
u32 val;
|
||||
|
||||
err = readl_poll_timeout(phy_common->mmio + UFS_PHY_PCS_READY_STATUS,
|
||||
val, (val & MASK_PCS_READY), 10, 1000000);
|
||||
if (err) {
|
||||
dev_err(phy_common->dev, "%s: poll for pcs failed err = %d\n",
|
||||
__func__, err);
|
||||
goto out;
|
||||
}
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
|
||||
static void ufs_qcom_phy_qmp_v4_dbg_register_dump(struct ufs_qcom_phy *phy)
|
||||
{
|
||||
ufs_qcom_phy_dump_regs(phy, COM_BASE, COM_SIZE,
|
||||
"PHY QSERDES COM Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, PCS2_BASE, PCS2_SIZE,
|
||||
"PHY PCS2 Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, PHY_BASE, PHY_SIZE,
|
||||
"PHY Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, RX_BASE(0), RX_SIZE,
|
||||
"PHY RX0 Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, TX_BASE(0), TX_SIZE,
|
||||
"PHY TX0 Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, RX_BASE(1), RX_SIZE,
|
||||
"PHY RX1 Registers ");
|
||||
ufs_qcom_phy_dump_regs(phy, TX_BASE(1), TX_SIZE,
|
||||
"PHY TX1 Registers ");
|
||||
}
|
||||
|
||||
static const struct phy_ops ufs_qcom_phy_qmp_v4_phy_ops = {
|
||||
.init = ufs_qcom_phy_qmp_v4_init,
|
||||
.exit = ufs_qcom_phy_qmp_v4_exit,
|
||||
.power_on = ufs_qcom_phy_power_on,
|
||||
.power_off = ufs_qcom_phy_power_off,
|
||||
.set_mode = ufs_qcom_phy_qmp_v4_set_mode,
|
||||
.calibrate = ufs_qcom_phy_qmp_v4_phy_calibrate,
|
||||
.owner = THIS_MODULE,
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_specific_ops phy_v4_ops = {
|
||||
.start_serdes = ufs_qcom_phy_qmp_v4_start_serdes,
|
||||
.is_physical_coding_sublayer_ready = ufs_qcom_phy_qmp_v4_is_pcs_ready,
|
||||
.set_tx_lane_enable = ufs_qcom_phy_qmp_v4_set_tx_lane_enable,
|
||||
.ctrl_rx_linecfg = ufs_qcom_phy_qmp_v4_ctrl_rx_linecfg,
|
||||
.power_control = ufs_qcom_phy_qmp_v4_power_control,
|
||||
.dbg_register_dump = ufs_qcom_phy_qmp_v4_dbg_register_dump,
|
||||
};
|
||||
|
||||
static int ufs_qcom_phy_qmp_v4_probe(struct platform_device *pdev)
|
||||
{
|
||||
struct device *dev = &pdev->dev;
|
||||
struct phy *generic_phy;
|
||||
struct ufs_qcom_phy_qmp_v4 *phy;
|
||||
int err = 0;
|
||||
|
||||
phy = devm_kzalloc(dev, sizeof(*phy), GFP_KERNEL);
|
||||
if (!phy) {
|
||||
err = -ENOMEM;
|
||||
goto out;
|
||||
}
|
||||
|
||||
generic_phy = ufs_qcom_phy_generic_probe(pdev, &phy->common_cfg,
|
||||
&ufs_qcom_phy_qmp_v4_phy_ops, &phy_v4_ops);
|
||||
|
||||
if (!generic_phy) {
|
||||
dev_err(dev, "%s: ufs_qcom_phy_generic_probe() failed\n",
|
||||
__func__);
|
||||
err = -EIO;
|
||||
goto out;
|
||||
}
|
||||
|
||||
phy_set_drvdata(generic_phy, phy);
|
||||
|
||||
strscpy(phy->common_cfg.name, UFS_PHY_NAME,
|
||||
sizeof(phy->common_cfg.name));
|
||||
|
||||
out:
|
||||
return err;
|
||||
}
|
||||
|
||||
static const struct of_device_id ufs_qcom_phy_qmp_v4_of_match[] = {
|
||||
{.compatible = "qcom,ufs-phy-qmp-v4-waipio"},
|
||||
{},
|
||||
};
|
||||
MODULE_DEVICE_TABLE(of, ufs_qcom_phy_qmp_v4_of_match);
|
||||
|
||||
static struct platform_driver ufs_qcom_phy_qmp_v4_driver = {
|
||||
.probe = ufs_qcom_phy_qmp_v4_probe,
|
||||
.driver = {
|
||||
.of_match_table = ufs_qcom_phy_qmp_v4_of_match,
|
||||
.name = "ufs_qcom_phy_qmp_v4_waipio",
|
||||
},
|
||||
};
|
||||
|
||||
module_platform_driver(ufs_qcom_phy_qmp_v4_driver);
|
||||
|
||||
MODULE_DESCRIPTION("Universal Flash Storage (UFS) QCOM PHY QMP v4 WAIPIO");
|
||||
MODULE_LICENSE("GPL");
|
||||
471
drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.h
Normal file
471
drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.h
Normal file
@ -0,0 +1,471 @@
|
||||
/* SPDX-License-Identifier: GPL-2.0-only */
|
||||
/*
|
||||
* Copyright (c) 2021, Linux Foundation. All rights reserved.
|
||||
* Copyright (c) 2023 Qualcomm Innovation Center, Inc. All rights reserved.
|
||||
*/
|
||||
|
||||
#ifndef UFS_QCOM_PHY_QMP_V4_H_
|
||||
#define UFS_QCOM_PHY_QMP_V4_H_
|
||||
|
||||
#include "phy-qcom-ufs-i.h"
|
||||
|
||||
/* QCOM UFS PHY control registers */
|
||||
#define COM_BASE 0x000
|
||||
#define COM_SIZE 0x1C0
|
||||
#define PHY_BASE 0xC00
|
||||
#define PHY_SIZE 0x200
|
||||
#define PCS2_BASE 0x200
|
||||
#define PCS2_SIZE 0x40
|
||||
#define TX_BASE(n) (0x400 + (0x400 * n))
|
||||
#define TX_SIZE 0x188
|
||||
#define RX_BASE(n) (0x600 + (0x400 * n))
|
||||
#define RX_SIZE 0x200
|
||||
#define COM_OFF(x) (COM_BASE + x)
|
||||
#define PHY_OFF(x) (PHY_BASE + x)
|
||||
#define TX_OFF(n, x) (TX_BASE(n) + x)
|
||||
#define RX_OFF(n, x) (RX_BASE(n) + x)
|
||||
|
||||
/* UFS PHY QSERDES COM registers */
|
||||
#define QSERDES_COM_SYSCLK_EN_SEL COM_OFF(0x94)
|
||||
#define QSERDES_COM_HSCLK_SEL COM_OFF(0x158)
|
||||
#define QSERDES_COM_HSCLK_HS_SWITCH_SEL COM_OFF(0x15C)
|
||||
#define QSERDES_COM_LOCK_CMP_EN COM_OFF(0xA4)
|
||||
#define QSERDES_COM_VCO_TUNE_MAP COM_OFF(0x10C)
|
||||
#define QSERDES_COM_PLL_IVCO COM_OFF(0x58)
|
||||
#define QSERDES_COM_VCO_TUNE_INITVAL2 COM_OFF(0x124)
|
||||
#define QSERDES_COM_BIN_VCOCAL_HSCLK_SEL COM_OFF(0x1BC)
|
||||
#define QSERDES_COM_DEC_START_MODE0 COM_OFF(0xBC)
|
||||
#define QSERDES_COM_CP_CTRL_MODE0 COM_OFF(0x74)
|
||||
#define QSERDES_COM_PLL_RCTRL_MODE0 COM_OFF(0x7C)
|
||||
#define QSERDES_COM_PLL_CCTRL_MODE0 COM_OFF(0x84)
|
||||
#define QSERDES_COM_LOCK_CMP1_MODE0 COM_OFF(0xAC)
|
||||
#define QSERDES_COM_LOCK_CMP2_MODE0 COM_OFF(0xB0)
|
||||
#define QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0 COM_OFF(0x1AC)
|
||||
#define QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0 COM_OFF(0x1B0)
|
||||
#define QSERDES_COM_DEC_START_MODE1 COM_OFF(0xC4)
|
||||
#define QSERDES_COM_CP_CTRL_MODE1 COM_OFF(0x78)
|
||||
#define QSERDES_COM_PLL_RCTRL_MODE1 COM_OFF(0x80)
|
||||
#define QSERDES_COM_PLL_CCTRL_MODE1 COM_OFF(0x88)
|
||||
#define QSERDES_COM_LOCK_CMP1_MODE1 COM_OFF(0xB4)
|
||||
#define QSERDES_COM_LOCK_CMP2_MODE1 COM_OFF(0xB8)
|
||||
#define QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1 COM_OFF(0x1B4)
|
||||
#define QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1 COM_OFF(0x1B8)
|
||||
#define QSERDES_COM_CMN_IPTRIM COM_OFF(0x60)
|
||||
|
||||
/* UFS PHY registers */
|
||||
#define UFS_PHY_PHY_START PHY_OFF(0x00)
|
||||
#define UFS_PHY_POWER_DOWN_CONTROL PHY_OFF(0x04)
|
||||
#define UFS_PHY_SW_RESET PHY_OFF(0x08)
|
||||
#define UFS_PHY_PCS_READY_STATUS PHY_OFF(0x180)
|
||||
#define UFS_PHY_LINECFG_DISABLE PHY_OFF(0x148)
|
||||
#define UFS_PHY_MULTI_LANE_CTRL1 PHY_OFF(0x1E0)
|
||||
#define UFS_PHY_RX_SIGDET_CTRL2 PHY_OFF(0x158)
|
||||
#define UFS_PHY_TX_LARGE_AMP_DRV_LVL PHY_OFF(0x30)
|
||||
#define UFS_PHY_TX_SMALL_AMP_DRV_LVL PHY_OFF(0x38)
|
||||
#define UFS_PHY_TX_MID_TERM_CTRL1 PHY_OFF(0x1D8)
|
||||
#define UFS_PHY_DEBUG_BUS_CLKSEL PHY_OFF(0x124)
|
||||
#define UFS_PHY_PLL_CNTL PHY_OFF(0x2C)
|
||||
#define UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB PHY_OFF(0x0C)
|
||||
#define UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB PHY_OFF(0x10)
|
||||
#define UFS_PHY_TX_PWM_GEAR_BAND PHY_OFF(0x160)
|
||||
#define UFS_PHY_TX_HS_GEAR_BAND PHY_OFF(0x168)
|
||||
#define UFS_PHY_TX_HSGEAR_CAPABILITY PHY_OFF(0x74)
|
||||
#define UFS_PHY_RX_HSGEAR_CAPABILITY PHY_OFF(0xB4)
|
||||
#define UFS_PHY_RX_MIN_HIBERN8_TIME PHY_OFF(0x150)
|
||||
#define UFS_PHY_BIST_FIXED_PAT_CTRL PHY_OFF(0x60)
|
||||
#define UFS_PHY_RX_SIGDET_CTRL1 PHY_OFF(0x154)
|
||||
|
||||
/* UFS PHY TX registers */
|
||||
#define QSERDES_TX0_PWM_GEAR_1_DIVIDER_BAND0_1 TX_OFF(0, 0x178)
|
||||
#define QSERDES_TX0_PWM_GEAR_2_DIVIDER_BAND0_1 TX_OFF(0, 0x17C)
|
||||
#define QSERDES_TX0_PWM_GEAR_3_DIVIDER_BAND0_1 TX_OFF(0, 0x180)
|
||||
#define QSERDES_TX0_PWM_GEAR_4_DIVIDER_BAND0_1 TX_OFF(0, 0x184)
|
||||
#define QSERDES_TX0_LANE_MODE_1 TX_OFF(0, 0x84)
|
||||
#define QSERDES_TX0_LANE_MODE_3 TX_OFF(0, 0x8C)
|
||||
#define QSERDES_TX0_RES_CODE_LANE_OFFSET_TX TX_OFF(0, 0x3C)
|
||||
#define QSERDES_TX0_RES_CODE_LANE_OFFSET_RX TX_OFF(0, 0x40)
|
||||
#define QSERDES_TX0_TRAN_DRVR_EMP_EN TX_OFF(0, 0xC0)
|
||||
|
||||
#define QSERDES_TX1_PWM_GEAR_1_DIVIDER_BAND0_1 TX_OFF(1, 0x178)
|
||||
#define QSERDES_TX1_PWM_GEAR_2_DIVIDER_BAND0_1 TX_OFF(1, 0x17C)
|
||||
#define QSERDES_TX1_PWM_GEAR_3_DIVIDER_BAND0_1 TX_OFF(1, 0x180)
|
||||
#define QSERDES_TX1_PWM_GEAR_4_DIVIDER_BAND0_1 TX_OFF(1, 0x184)
|
||||
#define QSERDES_TX1_LANE_MODE_1 TX_OFF(1, 0x84)
|
||||
#define QSERDES_TX1_LANE_MODE_3 TX_OFF(1, 0x8C)
|
||||
#define QSERDES_TX1_RES_CODE_LANE_OFFSET_TX TX_OFF(1, 0x3C)
|
||||
#define QSERDES_TX1_RES_CODE_LANE_OFFSET_RX TX_OFF(1, 0x40)
|
||||
#define QSERDES_TX1_TRAN_DRVR_EMP_EN TX_OFF(1, 0xC0)
|
||||
|
||||
/* UFS PHY RX registers */
|
||||
#define QSERDES_RX0_SIGDET_LVL RX_OFF(0, 0x120)
|
||||
#define QSERDES_RX0_SIGDET_CNTRL RX_OFF(0, 0x11C)
|
||||
#define QSERDES_RX0_SIGDET_DEGLITCH_CNTRL RX_OFF(0, 0x124)
|
||||
#define QSERDES_RX0_RX_BAND RX_OFF(0, 0x128)
|
||||
#define QSERDES_RX0_UCDR_FASTLOCK_FO_GAIN RX_OFF(0, 0x30)
|
||||
#define QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE RX_OFF(0, 0x34)
|
||||
#define QSERDES_RX0_UCDR_PI_CONTROLS RX_OFF(0, 0x44)
|
||||
#define QSERDES_RX0_UCDR_FASTLOCK_COUNT_LOW RX_OFF(0, 0x3C)
|
||||
#define QSERDES_RX0_UCDR_PI_CTRL2 RX_OFF(0, 0x48)
|
||||
#define QSERDES_RX0_RX_TERM_BW RX_OFF(0, 0x80)
|
||||
#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL1 RX_OFF(0, 0xE8)
|
||||
#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(0, 0xEC)
|
||||
#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3 RX_OFF(0, 0xF0)
|
||||
#define QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4 RX_OFF(0, 0xF4)
|
||||
#define QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1 RX_OFF(0, 0x110)
|
||||
#define QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2 RX_OFF(0, 0x114)
|
||||
#define QSERDES_RX0_RX_IDAC_MEASURE_TIME RX_OFF(0, 0x100)
|
||||
#define QSERDES_RX0_RX_IDAC_TSETTLE_LOW RX_OFF(0, 0xF8)
|
||||
#define QSERDES_RX0_RX_IDAC_TSETTLE_HIGH RX_OFF(0, 0xFC)
|
||||
#define QSERDES_RX0_RX_MODE_00_LOW RX_OFF(0, 0x15C)
|
||||
#define QSERDES_RX0_RX_MODE_00_HIGH RX_OFF(0, 0x160)
|
||||
#define QSERDES_RX0_RX_MODE_00_HIGH2 RX_OFF(0, 0x164)
|
||||
#define QSERDES_RX0_RX_MODE_00_HIGH3 RX_OFF(0, 0x168)
|
||||
#define QSERDES_RX0_RX_MODE_00_HIGH4 RX_OFF(0, 0x16C)
|
||||
#define QSERDES_RX0_RX_MODE_01_LOW RX_OFF(0, 0x170)
|
||||
#define QSERDES_RX0_RX_MODE_01_HIGH RX_OFF(0, 0x174)
|
||||
#define QSERDES_RX0_RX_MODE_01_HIGH2 RX_OFF(0, 0x178)
|
||||
#define QSERDES_RX0_RX_MODE_01_HIGH3 RX_OFF(0, 0x17C)
|
||||
#define QSERDES_RX0_RX_MODE_01_HIGH4 RX_OFF(0, 0x180)
|
||||
#define QSERDES_RX0_RX_MODE_10_LOW RX_OFF(0, 0x184)
|
||||
#define QSERDES_RX0_RX_MODE_10_HIGH RX_OFF(0, 0x188)
|
||||
#define QSERDES_RX0_RX_MODE_10_HIGH2 RX_OFF(0, 0x18C)
|
||||
#define QSERDES_RX0_RX_MODE_10_HIGH3 RX_OFF(0, 0x190)
|
||||
#define QSERDES_RX0_RX_MODE_10_HIGH4 RX_OFF(0, 0x194)
|
||||
#define QSERDES_RX0_DCC_CTRL1 RX_OFF(0, 0x1A8)
|
||||
#define QSERDES_RX0_GM_CAL RX_OFF(0, 0xDC)
|
||||
#define QSERDES_RX0_AC_JTAG_ENABLE RX_OFF(0, 0x68)
|
||||
#define QSERDES_RX0_UCDR_FO_GAIN RX_OFF(0, 0x08)
|
||||
#define QSERDES_RX0_UCDR_SO_GAIN RX_OFF(0, 0x14)
|
||||
#define QSERDES_RX0_RX_INTERFACE_MODE RX_OFF(0, 0x134)
|
||||
|
||||
#define QSERDES_RX1_SIGDET_LVL RX_OFF(1, 0x120)
|
||||
#define QSERDES_RX1_SIGDET_CNTRL RX_OFF(1, 0x11C)
|
||||
#define QSERDES_RX1_SIGDET_DEGLITCH_CNTRL RX_OFF(1, 0x124)
|
||||
#define QSERDES_RX1_RX_BAND RX_OFF(1, 0x128)
|
||||
#define QSERDES_RX1_UCDR_FASTLOCK_FO_GAIN RX_OFF(1, 0x30)
|
||||
#define QSERDES_RX1_UCDR_SO_SATURATION_AND_ENABLE RX_OFF(1, 0x34)
|
||||
#define QSERDES_RX1_UCDR_PI_CONTROLS RX_OFF(1, 0x44)
|
||||
#define QSERDES_RX1_UCDR_FASTLOCK_COUNT_LOW RX_OFF(1, 0x3C)
|
||||
#define QSERDES_RX1_UCDR_PI_CTRL2 RX_OFF(1, 0x48)
|
||||
#define QSERDES_RX1_RX_TERM_BW RX_OFF(1, 0x80)
|
||||
#define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL1 RX_OFF(1, 0xE8)
|
||||
#define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL2 RX_OFF(1, 0xEC)
|
||||
#define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL3 RX_OFF(1, 0xF0)
|
||||
#define QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL4 RX_OFF(1, 0xF4)
|
||||
#define QSERDES_RX1_RX_EQ_OFFSET_ADAPTOR_CNTRL1 RX_OFF(1, 0x110)
|
||||
#define QSERDES_RX1_RX_OFFSET_ADAPTOR_CNTRL2 RX_OFF(1, 0x114)
|
||||
#define QSERDES_RX1_RX_IDAC_MEASURE_TIME RX_OFF(1, 0x100)
|
||||
#define QSERDES_RX1_RX_IDAC_TSETTLE_LOW RX_OFF(1, 0xF8)
|
||||
#define QSERDES_RX1_RX_IDAC_TSETTLE_HIGH RX_OFF(1, 0xFC)
|
||||
#define QSERDES_RX1_RX_MODE_00_LOW RX_OFF(1, 0x15C)
|
||||
#define QSERDES_RX1_RX_MODE_00_HIGH RX_OFF(1, 0x160)
|
||||
#define QSERDES_RX1_RX_MODE_00_HIGH2 RX_OFF(1, 0x164)
|
||||
#define QSERDES_RX1_RX_MODE_00_HIGH3 RX_OFF(1, 0x168)
|
||||
#define QSERDES_RX1_RX_MODE_00_HIGH4 RX_OFF(1, 0x16C)
|
||||
#define QSERDES_RX1_RX_MODE_01_LOW RX_OFF(1, 0x170)
|
||||
#define QSERDES_RX1_RX_MODE_01_HIGH RX_OFF(1, 0x174)
|
||||
#define QSERDES_RX1_RX_MODE_01_HIGH2 RX_OFF(1, 0x178)
|
||||
#define QSERDES_RX1_RX_MODE_01_HIGH3 RX_OFF(1, 0x17C)
|
||||
#define QSERDES_RX1_RX_MODE_01_HIGH4 RX_OFF(1, 0x180)
|
||||
#define QSERDES_RX1_RX_MODE_10_LOW RX_OFF(1, 0x184)
|
||||
#define QSERDES_RX1_RX_MODE_10_HIGH RX_OFF(1, 0x188)
|
||||
#define QSERDES_RX1_RX_MODE_10_HIGH2 RX_OFF(1, 0x18C)
|
||||
#define QSERDES_RX1_RX_MODE_10_HIGH3 RX_OFF(1, 0x190)
|
||||
#define QSERDES_RX1_RX_MODE_10_HIGH4 RX_OFF(1, 0x194)
|
||||
#define QSERDES_RX1_DCC_CTRL1 RX_OFF(1, 0x1A8)
|
||||
#define QSERDES_RX1_GM_CAL RX_OFF(1, 0xDC)
|
||||
#define QSERDES_RX1_AC_JTAG_ENABLE RX_OFF(1, 0x68)
|
||||
#define QSERDES_RX1_UCDR_FO_GAIN RX_OFF(1, 0x08)
|
||||
#define QSERDES_RX1_UCDR_SO_GAIN RX_OFF(1, 0x14)
|
||||
#define QSERDES_RX1_RX_INTERFACE_MODE RX_OFF(1, 0x134)
|
||||
|
||||
#define UFS_PHY_RX_LINECFG_DISABLE_BIT BIT(1)
|
||||
#define QSERDES_RX_INTERFACE_MODE_CLOCK_EDGE_BIT BIT(5)
|
||||
|
||||
/*
|
||||
* This structure represents the v4 specific phy.
|
||||
* common_cfg MUST remain the first field in this structure
|
||||
* in case extra fields are added. This way, when calling
|
||||
* get_ufs_qcom_phy() of generic phy, we can extract the
|
||||
* common phy structure (struct ufs_qcom_phy) out of it
|
||||
* regardless of the relevant specific phy.
|
||||
*/
|
||||
struct ufs_qcom_phy_qmp_v4 {
|
||||
struct ufs_qcom_phy common_cfg;
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xD9),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x11),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_HS_SWITCH_SEL, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x42),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IVCO, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x14),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x19),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xAC),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x14),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x65),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xDD),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_LANE_MODE_1, 0xE5),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_RES_CODE_LANE_OFFSET_RX, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_TRAN_DRVR_EMP_EN, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_CNTRL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_BAND, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_FO_GAIN, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x5A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CONTROLS, 0xF1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_COUNT_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CTRL2, 0x81),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FO_GAIN, 0x0E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_GAIN, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_TERM_BW, 0x6F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL1, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x4A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_MEASURE_TIME, 0x20),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_LOW, 0xBF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH, 0xBF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH2, 0x7F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH3, 0x7F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH4, 0x2D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_LOW, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH2, 0xED),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH4, 0x3C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH4, 0xB7),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_DCC_CTRL1, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_GM_CAL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL2, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x10),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_DRV_LVL, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_MID_TERM_CTRL1, 0x43),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_DEBUG_BUS_CLKSEL, 0x1F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_HIBERN8_TIME, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_BIST_FIXED_PAT_CTRL, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL1, 0x0E),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_rate_A_no_g4[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_POWER_DOWN_CONTROL, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_SYSCLK_EN_SEL, 0xD9),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_SEL, 0x11),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_HSCLK_HS_SWITCH_SEL, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP_EN, 0x42),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_IVCO, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_INITVAL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_HSCLK_SEL, 0x11),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE0, 0x82),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE0, 0x14),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE0, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE0, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE0, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE0, 0x19),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE0, 0xAC),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE0, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_DEC_START_MODE1, 0x98),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_CP_CTRL_MODE1, 0x14),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_RCTRL_MODE1, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_PLL_CCTRL_MODE1, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP1_MODE1, 0x65),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_LOCK_CMP2_MODE1, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE1_MODE1, 0xDD),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_BIN_VCOCAL_CMP_CODE2_MODE1, 0x23),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_LANE_MODE_1, 0xF5),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_LANE_MODE_3, 0x3F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_RES_CODE_LANE_OFFSET_TX, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_RES_CODE_LANE_OFFSET_RX, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX0_TRAN_DRVR_EMP_EN, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_CNTRL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_SIGDET_DEGLITCH_CNTRL, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_BAND, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_FO_GAIN, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_SATURATION_AND_ENABLE, 0x5A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CONTROLS, 0xF1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FASTLOCK_COUNT_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_PI_CTRL2, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_FO_GAIN, 0x0E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_UCDR_SO_GAIN, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_TERM_BW, 0x1B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL1, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL2, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL3, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQU_ADAPTOR_CNTRL4, 0x1A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_MEASURE_TIME, 0x10),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_TSETTLE_LOW, 0xC0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_IDAC_TSETTLE_HIGH, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_LOW, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH2, 0xED),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_00_HIGH4, 0x3C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_01_HIGH4, 0xB7),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_RX_MODE_10_HIGH4, 0xB7),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX0_DCC_CTRL1, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL2, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_LARGE_AMP_DRV_LVL, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_SMALL_AMP_DRV_LVL, 0x02),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_MID_TERM_CTRL1, 0x43),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_DEBUG_BUS_CLKSEL, 0x1F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_MIN_HIBERN8_TIME, 0xFF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_PLL_CNTL, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_MSB, 0x16),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TIMER_20US_CORECLK_STEPS_LSB, 0xD8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_PWM_GEAR_BAND, 0xAA),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_HS_GEAR_BAND, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_TX_HSGEAR_CAPABILITY, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_HSGEAR_CAPABILITY, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_RX_SIGDET_CTRL1, 0x0E),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_2nd_lane[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_LANE_MODE_1, 0xE5),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_RES_CODE_LANE_OFFSET_TX, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_RES_CODE_LANE_OFFSET_RX, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_TRAN_DRVR_EMP_EN, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_CNTRL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_DEGLITCH_CNTRL, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_BAND, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_FO_GAIN, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_SATURATION_AND_ENABLE, 0x5A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CONTROLS, 0xF1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_COUNT_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CTRL2, 0x81),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FO_GAIN, 0x0E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_GAIN, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_TERM_BW, 0x6F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL1, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL3, 0x4A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL4, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_MEASURE_TIME, 0x20),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_TSETTLE_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_TSETTLE_HIGH, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_LOW, 0xBF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH, 0xBF),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH2, 0x7F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH3, 0x7F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH4, 0x2D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_LOW, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH2, 0xED),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH4, 0x3C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH4, 0xB7),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_DCC_CTRL1, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_GM_CAL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_MULTI_LANE_CTRL1, 0x02),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_2nd_lane_no_g4[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_1_DIVIDER_BAND0_1, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_2_DIVIDER_BAND0_1, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_3_DIVIDER_BAND0_1, 0x01),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_PWM_GEAR_4_DIVIDER_BAND0_1, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_LANE_MODE_1, 0xF5),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_LANE_MODE_3, 0x3F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_RES_CODE_LANE_OFFSET_TX, 0x03),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_RES_CODE_LANE_OFFSET_RX, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_TX1_TRAN_DRVR_EMP_EN, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_LVL, 0x24),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_CNTRL, 0x0F),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_SIGDET_DEGLITCH_CNTRL, 0x1E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_BAND, 0x18),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_FO_GAIN, 0x0A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_SATURATION_AND_ENABLE, 0x5A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CONTROLS, 0xF1),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FASTLOCK_COUNT_LOW, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_PI_CTRL2, 0x80),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_FO_GAIN, 0x0E),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_UCDR_SO_GAIN, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_TERM_BW, 0x1B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL1, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL2, 0x06),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL3, 0x04),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQU_ADAPTOR_CNTRL4, 0x1A),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_EQ_OFFSET_ADAPTOR_CNTRL1, 0x17),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_OFFSET_ADAPTOR_CNTRL2, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_MEASURE_TIME, 0x10),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_TSETTLE_LOW, 0xC0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_IDAC_TSETTLE_HIGH, 0x00),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_LOW, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH, 0x6D),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH2, 0xED),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_00_HIGH4, 0x3C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_01_HIGH4, 0xB7),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_LOW, 0xE0),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH2, 0xC8),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH3, 0x3B),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_RX_MODE_10_HIGH4, 0xB7),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_RX1_DCC_CTRL1, 0x0C),
|
||||
UFS_QCOM_PHY_CAL_ENTRY(UFS_PHY_MULTI_LANE_CTRL1, 0x02),
|
||||
};
|
||||
|
||||
static struct ufs_qcom_phy_calibration phy_cal_table_rate_B[] = {
|
||||
UFS_QCOM_PHY_CAL_ENTRY(QSERDES_COM_VCO_TUNE_MAP, 0x06),
|
||||
};
|
||||
|
||||
#endif
|
||||
@ -76,6 +76,7 @@ def define_gen3auto():
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-kalama.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-pineapple.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.ko",
|
||||
"drivers/pinctrl/pinctrl-sx150x.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-msm.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-sdmshrike.ko",
|
||||
|
||||
@ -38,9 +38,10 @@ def define_kalama():
|
||||
"drivers/mailbox/qcom-ipcc.ko",
|
||||
"drivers/mfd/qcom-spmi-pmic.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-kalama.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-pineapple.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-kalama.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-msm.ko",
|
||||
"drivers/power/reset/qcom-dload-mode.ko",
|
||||
|
||||
@ -92,6 +92,7 @@ def define_pineapple():
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-kalama.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-pineapple.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qrbtc-sdm845.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-cliffs.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-msm.ko",
|
||||
|
||||
@ -62,6 +62,7 @@ def define_sdmsteppeauto():
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-kalama.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-pineapple.ko",
|
||||
"drivers/phy/qualcomm/phy-qcom-ufs-qmp-v4-waipio.ko",
|
||||
"drivers/pinctrl/pinctrl-sx150x.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-msm.ko",
|
||||
"drivers/pinctrl/qcom/pinctrl-slpi.ko",
|
||||
|
||||
Loading…
Reference in New Issue
Block a user