[ Upstream commit 148c847c9e5a54b99850617bf9c143af9a344f92 ]
pwmX_enable supports three possible values:
0: Fan control disabled. Duty cycle is fixed to 0%
1: Fan control enabled, pwm mode. Duty cycle is determined by
values written into Target Duty Cycle registers.
2: Fan control enabled, rpm mode
Duty cycle is adjusted such that fan speed matches
the values in Target Count registers
The current code does not do this; instead, it mixes pwm control
configuration with fan speed monitoring configuration. Worse, it
reports that pwm control would be disabled (pwmX_enable==0) when
it is in fact enabled in pwm mode. Part of the problem may be that
the chip sets the "TACH input enable" bit on its own whenever the
mode bit is set to RPM mode, but that doesn't mean that "TACH input
enable" accurately reflects the pwm mode.
Fix it up and only handle pwm control with the pwmX_enable attributes.
In the documentation, clarify that disabling pwm control (pwmX_enable=0)
sets the pwm duty cycle to 0%. In the code, explain why TACH_INPUT_EN
is set together with RPM_MODE.
While at it, only update the configuration register if the configuration
has changed, and only update the cached configuration if updating the
chip configuration was successful.
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Václav Kubernát <kubernat@cesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/20210526154022.3223012-4-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 897f6339893b741a5d68ae8e2475df65946041c2 ]
The MAX31790 has two sets of registers for pwm duty cycles, one to request
a duty cycle and one to read the actual current duty cycle. Both do not
have to be the same.
When reporting the pwm duty cycle to the user, the actual pwm duty cycle
from pwm duty cycle registers needs to be reported. When setting it, the
pwm target duty cycle needs to be written. Since we don't know the actual
pwm duty cycle after a target pwm duty cycle has been written, set the
valid flag to false to indicate that actual pwm duty cycle should be read
from the chip instead of using cached values.
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Cc: Václav Kubernát <kubernat@cesnet.cz>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Václav Kubernát <kubernat@ceesnet.cz>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Link: https://lore.kernel.org/r/20210526154022.3223012-3-linux@roeck-us.net
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e198be37e52551bb863d07d2edc535d0932a3c4f ]
Some BT.656 sensors (e.g. ADV718x) transmit frames with unstable BT.656
sync codes after initial power on. This confuses the imx CSI,resulting
in vertical and/or horizontal sync issues. Skip the first 20 frames
to avoid the unstable sync codes.
[fabio: fixed checkpatch warning and increased the frame skipping to 20]
Signed-off-by: Steve Longerbeam <slongerbeam@gmail.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5368b1ee2939961a16e74972b69088433fc52195 ]
As reported by smatch:
drivers/media/common/siano/smsdvb-main.c:1231 smsdvb_hotplug() warn: '&client->entry' not removed from list
If an error occur at the end of the registration logic, it won't
drop the device from the list.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit abc0226df64dc137b48b911c1fe4319aec5891bb ]
The risk of especulation is actually almost-non-existing here,
as there are very few users of TCP/IP using the DVB stack,
as, this is mainly used with DVB-S/S2 cards, and only by people
that receives TCP/IP from satellite connections, which limits
a lot the number of users of such feature(*).
(*) In thesis, DVB-C cards could also benefit from it, but I'm
yet to see a hardware that supports it.
Yet, fixing it is trivial.
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 22ca9f4aaf431a9413dcc115dd590123307f274f ]
crypto_shash_alg_has_setkey() is implemented by testing whether the
.setkey() member of a struct shash_alg points to the default version,
called shash_no_setkey(). As crypto_shash_alg_has_setkey() is a static
inline, this requires shash_no_setkey() to be exported to modules.
Unfortunately, when building with CFI, function pointers are routed
via CFI stubs which are private to each module (or to the kernel proper)
and so this function pointer comparison may fail spuriously.
Let's fix this by turning crypto_shash_alg_has_setkey() into an out of
line function.
Cc: Sami Tolvanen <samitolvanen@google.com>
Cc: Eric Biggers <ebiggers@kernel.org>
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Reviewed-by: Sami Tolvanen <samitolvanen@google.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 961470820021e6f9d74db4837bd6831a1a30341b ]
The sdhci_sprd_writew() was defined by never used in sdhci_ops:
drivers/mmc/host/sdhci-sprd.c:134:20: warning: unused function 'sdhci_sprd_writew'
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Link: https://lore.kernel.org/r/20210601095403.236007-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 42933c8aa14be1caa9eda41f65cde8a3a95d3e39 ]
This patch fixes the following issues:
1. memstick_free_host() will free the host, so the use of ms_dev(host) after
it will be a problem. To fix this, move memstick_free_host() after when we
are done with ms_dev(host).
2. In rtsx_usb_ms_drv_remove(), pm need to be disabled before we remove
and free host otherwise memstick_check will be called and UAF will
happen.
[ 11.351173] BUG: KASAN: use-after-free in rtsx_usb_ms_drv_remove+0x94/0x140 [rtsx_usb_ms]
[ 11.357077] rtsx_usb_ms_drv_remove+0x94/0x140 [rtsx_usb_ms]
[ 11.357376] platform_remove+0x2a/0x50
[ 11.367531] Freed by task 298:
[ 11.368537] kfree+0xa4/0x2a0
[ 11.368711] device_release+0x51/0xe0
[ 11.368905] kobject_put+0xa2/0x120
[ 11.369090] rtsx_usb_ms_drv_remove+0x8c/0x140 [rtsx_usb_ms]
[ 11.369386] platform_remove+0x2a/0x50
[ 12.038408] BUG: KASAN: use-after-free in __mutex_lock.isra.0+0x3ec/0x7c0
[ 12.045432] mutex_lock+0xc9/0xd0
[ 12.046080] memstick_check+0x6a/0x578 [memstick]
[ 12.046509] process_one_work+0x46d/0x750
[ 12.052107] Freed by task 297:
[ 12.053115] kfree+0xa4/0x2a0
[ 12.053272] device_release+0x51/0xe0
[ 12.053463] kobject_put+0xa2/0x120
[ 12.053647] rtsx_usb_ms_drv_remove+0xc4/0x140 [rtsx_usb_ms]
[ 12.053939] platform_remove+0x2a/0x50
Signed-off-by: Tong Zhang <ztong0001@gmail.com>
Co-developed-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20210511163944.1233295-1-ztong0001@gmail.com
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9ad1efee086e0e913914fa2b2173efb830bad68c ]
When the driver fails to talk with the hardware with dvb_usb_generic_rw,
it will return an error to dvb_usb_adapter_frontend_init. However, the
driver forgets to free the resource (e.g., struct cinergyt2_fe_state),
which leads to a memory leak.
Fix this by freeing struct cinergyt2_fe_state when dvb_usb_generic_rw
fails in cinergyt2_frontend_attach.
backtrace:
[<0000000056e17b1a>] kmalloc include/linux/slab.h:552 [inline]
[<0000000056e17b1a>] kzalloc include/linux/slab.h:682 [inline]
[<0000000056e17b1a>] cinergyt2_fe_attach+0x21/0x80 drivers/media/usb/dvb-usb/cinergyT2-fe.c:271
[<00000000ae0b1711>] cinergyt2_frontend_attach+0x21/0x70 drivers/media/usb/dvb-usb/cinergyT2-core.c:74
[<00000000d0254861>] dvb_usb_adapter_frontend_init+0x11b/0x1b0 drivers/media/usb/dvb-usb/dvb-usb-dvb.c:290
[<0000000002e08ac6>] dvb_usb_adapter_init drivers/media/usb/dvb-usb/dvb-usb-init.c:84 [inline]
[<0000000002e08ac6>] dvb_usb_init drivers/media/usb/dvb-usb/dvb-usb-init.c:173 [inline]
[<0000000002e08ac6>] dvb_usb_device_init.cold+0x4d0/0x6ae drivers/media/usb/dvb-usb/dvb-usb-init.c:287
Reported-by: syzbot+e1de8986786b3722050e@syzkaller.appspotmail.com
Signed-off-by: Dongliang Mu <mudongliangabcd@gmail.com>
Signed-off-by: Sean Young <sean@mess.org>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27f2a4db76e8d8a8b601fc1c6a7a17f88bd907ab ]
GDB produces the following warning when debugging kernels built with
CONFIG_RELR:
BFD: /android0/linux-next/vmlinux: unknown type [0x13] section `.relr.dyn'
when loading a kernel built with CONFIG_RELR into GDB. It can also
prevent debugging symbols using such relocations.
Peter sugguests:
[That flag] means that lld will use dynamic tags and section type
numbers in the OS-specific range rather than the generic range. The
kernel itself doesn't care about these numbers; it determines the
location of the RELR section using symbols defined by a linker script.
Link: https://github.com/ClangBuiltLinux/linux/issues/1057
Suggested-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Nick Desaulniers <ndesaulniers@google.com>
Link: https://lore.kernel.org/r/20210522012626.2811297-1-ndesaulniers@google.com
Signed-off-by: Will Deacon <will@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7fdd208687ba59ebfb09b2199596471c63b69e3 ]
When ctx_id >= HVA_MAX_INSTANCES in hva_hw_its_irq_thread() it tries to
access fields of ctx that is NULL at that point. The patch gets rid of
these accesses.
Found by Linux Driver Verification project (linuxtesting.org).
Signed-off-by: Evgeny Novikov <novikov@ispras.ru>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7dd0c9e547b6924e18712b6b51aa3cba1896ee2c ]
A use after free bug caused by the dangling pointer
filp->privitate_data in v4l2_fh_release.
See https://lore.kernel.org/patchwork/patch/1419058/.
My patch sets the dangling pointer to NULL to provide
robust.
Signed-off-by: Lv Yunlong <lyl2019@mail.ustc.edu.cn>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ac5688637144644f06ed1f3c6d4dd8bb7db96020 ]
The em28xx struct kref isn't being decreased after an error in the
em28xx_ir_init, leading to a possible memory leak.
A kref_put and em28xx_shutdown_buttons is added to the error handler code.
Signed-off-by: Igor Matheus Andrade Torrente <igormtorrente@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08f7c2f4d0e9f4283f5796b8168044c034a1bfcb ]
When using something other than 8 spaces per tab, this ascii art
makes not sense, and the reader might end up wondering what this
advanced equation "is".
Signed-off-by: Odin Ugedal <odin@uged.al>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Vincent Guittot <vincent.guittot@linaro.org>
Link: https://lkml.kernel.org/r/20210518125202.78658-4-odin@uged.al
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9afe77cf25d9670e61b489fd52cc6f75fd7f6803 ]
Remove the unused macro ICP_DH895XCC_PESRAM_BAR_SIZE in the firmware
loader.
This is to fix the following warning when compiling the driver using the
clang compiler with CC=clang W=2:
drivers/crypto/qat/qat_common/qat_uclo.c:345:9: warning: macro is not used [-Wunused-macros]
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 96b57229209490c8bca4335b01a426a96173dc56 ]
Check the return code of the function qat_hal_rd_rel_reg() and return it
to the caller.
This is to fix the following warning when compiling the driver with
clang scan-build:
drivers/crypto/qat/qat_common/qat_hal.c:1436:2: warning: 6th function call argument is an uninitialized value
Signed-off-by: Jack Xu <jack.xu@intel.com>
Co-developed-by: Zhehui Xiang <zhehui.xiang@intel.com>
Signed-off-by: Zhehui Xiang <zhehui.xiang@intel.com>
Reviewed-by: Giovanni Cabiddu <giovanni.cabiddu@intel.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8194e5e63fdcb349e8da9eef9e574d5b1d687cb ]
syzbot has reported the following warning in pvr2_i2c_done:
sysfs group 'power' not found for kobject '1-0043'
When the device is disconnected (pvr_hdw_disconnect), the i2c adapter is
not unregistered along with the USB and v4l2 teardown. As part of the USB
device disconnect, the sysfs files of the subdevices are also deleted.
So, by the time pvr_i2c_core_done is called by pvr_context_destroy, the
sysfs files have been deleted.
To fix this, unregister the i2c adapter too in pvr_hdw_disconnect. Make
the device deregistration code shared by calling pvr_hdw_disconnect from
pvr2_hdw_destroy.
Reported-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Tested-by: syzbot+e74a998ca8f1df9cc332@syzkaller.appspotmail.com
Reviewed-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Anirudh Rayabharam <mail@anirudhrb.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3d37ef41bed0854805ab9af22c422267510e1344 ]
The cobalt_s_bit_sysctrl reads the old register value over PCI,
then changes a bit and sets writes the new value to the register.
This is used among other things for setting the HPD output pin.
But if the HPD is changed for multiple inputs at the same time,
then this causes a race condition where a stale value is read.
Serialize this function with a mutex.
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit be8656e62e9e791837b606a027802b504a945c97 ]
syzbot reported leak in cpia2 usb driver. The problem was
in invalid error handling.
v4l2_device_register() is called in cpia2_init_camera_struct(), but
all error cases after cpia2_init_camera_struct() did not call the
v4l2_device_unregister()
Reported-by: syzbot+d1e69c888f0d3866ead4@syzkaller.appspotmail.com
Signed-off-by: Pavel Skripkin <paskripkin@gmail.com>
Signed-off-by: Hans Verkuil <hverkuil-cisco@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 56c1f0876293888f686e31278d183d4af2cac3c3 ]
The right thing to do is to add a new object to the building
system when a certain config option is selected, and *not*
override them.
So, fix obj-$(config) logic at sti makefiles, using "+=",
instead of ":=".
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 06676aa1f455c74e3ad1624cea3acb9ed2ef71ae ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Bixuan Cui <cuibixuan@huawei.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0cdbabf8bb7a6147f5adf37dbc251e92a1bbc2c7 ]
pm_runtime_resume_and_get() wraps around pm_runtime_get_sync() and
decrements the runtime PM usage counter in case the latter function
fails and keeps the counter balanced.
Signed-off-by: Łukasz Stelmach <l.stelmach@samsung.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d019f38a1af3c6015cde6a47951a3ec43beeed80 ]
This patch adds missing MODULE_DEVICE_TABLE definition which generates
correct modalias for automatic loading of this driver when it is built
as an external module.
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Link: https://lore.kernel.org/r/1620705198-104566-1-git-send-email-zou_wei@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e7a1a3abea373e41ba7dfe0fbc93cb79b6a3a529 ]
word_len should be checked in the omap1_spi100k_setup_transfer
function to see if it exceeds 32.
Signed-off-by: Tian Tao <tiantao6@hisilicon.com>
Link: https://lore.kernel.org/r/1619695248-39045-1-git-send-email-tiantao6@hisilicon.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 026a1dc1af52742c5897e64a3431445371a71871 ]
pch_spi_set_tx() frees data->pkt_tx_buff on failure of kzalloc() for
data->pkt_rx_buff, but its caller, pch_spi_process_messages(), will
free data->pkt_tx_buff again. Set data->pkt_tx_buff to NULL after
kfree() to avoid double free.
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620284888-65215-1-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e37a3ab0627011fb63875e9a93094b6fc8ddf48 ]
In function 'spi_test_run_iter': Value 'tx_buf' might be 'rx_buf'.
Signed-off-by: Jay Fang <f.fangjian@huawei.com>
Link: https://lore.kernel.org/r/1620629903-15493-5-git-send-email-f.fangjian@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 59087b66ea6730c130c57d23bd9fd139b78c1ba5 ]
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a bonus, as pm_runtime_get_sync() always return 0 on
success, the logic can be simplified.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c44eac5b72e23c31eefc0e10a71d9650036b8341 ]
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
The bdisp_start_streaming() doesn't take it into account, which
would unbalance PM usage counter at bdisp_stop_streaming().
The logic at bdisp_probe() is correct, but the best is to use
the same call along the driver.
So, replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 10343de268d10cf07b092b8b525e12ad558ead77 ]
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
As a plus, pm_runtime_resume_and_get() doesn't return
positive numbers, so the return code validation can
be removed.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Andrzej Pietrasiewicz <andrzejtp2010@gmail.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 908711f542c17fe61e5d653da1beb8e5ab5c7b50 ]
Currently, the driver just assumes that PM runtime logic
succeded resuming the device.
That may not be the case, as pm_runtime_get_sync()
can fail (but keeping the usage count incremented).
Replace the code to use pm_runtime_resume_and_get(),
and letting it return the error code.
This way, if mtk_vcodec_dec_pw_on() fails, the logic
under fops_vcodec_open() will do the right thing and
return an error, instead of just assuming that the
device is ready to be used.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e8b1526db164c9d4b9dacfb9bc48e365d7c4860 ]
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, check if the PM runtime error was caught at open time.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fdc34e82c0f968ac4c157bd3d8c299ebc24c9c63 ]
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, check if the PM runtime error was caught at
s5p_cec_adap_enable().
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Reviewed-by: Sylwester Nawrocki <s.nawrocki@samsung.com>
Acked-by: Marek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d07bb9702cf5f5ccf3fb661e6cab54bbc33cd23f ]
The pm_runtime_get_sync() internally increments the
dev->power.usage_count without decrementing it, even on errors.
Replace it by the new pm_runtime_resume_and_get(), introduced by:
commit dd8088d5a896 ("PM: runtime: Add pm_runtime_resume_and_get to deal with usage counter")
in order to properly decrement the usage counter, avoiding
a potential PM usage counter leak.
While here, fix the return contition of mtk_mdp_m2m_start_streaming(),
as it doesn't make any sense to return 0 if the PM runtime failed
to resume.
Reviewed-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e793ba77c18382f08e440260fe72bc6fce2a3cb ]
Currently, the SPI core doesn't set the struct device fwnode pointer
when it creates a new SPI device. This means when the device is
registered the fwnode is NULL and the check in device_add which sets
the fwnode->dev pointer is skipped. This wasn't previously an issue,
however these two patches:
commit 4731210c09f5 ("gpiolib: Bind gpio_device to a driver to enable
fw_devlink=on by default")
commit ced2af419528 ("gpiolib: Don't probe gpio_device if it's not the
primary device")
Added some code to the GPIO core which relies on using that
fwnode->dev pointer to determine if a driver is bound to the fwnode
and if not bind a stub GPIO driver. This means the GPIO providers
behind SPI will get both the expected driver and this stub driver
causing the stub driver to fail if it attempts to request any pin
configuration. For example on my system:
madera-pinctrl madera-pinctrl: pin gpio5 already requested by madera-pinctrl; cannot claim for gpiochip3
madera-pinctrl madera-pinctrl: pin-4 (gpiochip3) status -22
madera-pinctrl madera-pinctrl: could not request pin 4 (gpio5) from group aif1 on device madera-pinctrl
gpio_stub_drv gpiochip3: Error applying setting, reverse things back
gpio_stub_drv: probe of gpiochip3 failed with error -22
The firmware node on the device created by the GPIO framework is set
through the of_node pointer hence things generally actually work,
however that fwnode->dev is never set, as the check was skipped at
device_add time. This fix appears to match how the I2C subsystem
handles the same situation.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210421101402.8468-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 80ef08670d4c28a06a3de954bd350368780bcfef upstream.
A request could end up on the fpq->io list after fuse_abort_conn() has
reset fpq->connected and aborted requests on that list:
Thread-1 Thread-2
======== ========
->fuse_simple_request() ->shutdown
->__fuse_request_send()
->queue_request() ->fuse_abort_conn()
->fuse_dev_do_read() ->acquire(fpq->lock)
->wait_for(fpq->lock) ->set err to all req's in fpq->io
->release(fpq->lock)
->acquire(fpq->lock)
->add req to fpq->io
After the userspace copy is done the request will be ended, but
req->out.h.error will remain uninitialized. Also the copy might block
despite being already aborted.
Fix both issues by not allowing the request to be queued on the fpq->io
list after fuse_abort_conn() has processed this list.
Reported-by: Pradeep P V K <pragalla@codeaurora.org>
Fixes: fd22d62ed0c3 ("fuse: no fc->lock for iqueue parts")
Cc: <stable@vger.kernel.org> # v4.2
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b89ecd60d38ec042d63bdb376c722a16f92bcb88 upstream.
Fix the "fuse: trying to steal weird page" warning.
Description from Johannes Weiner:
"Think of it as similar to PG_active. It's just another usage/heat
indicator of file and anon pages on the reclaim LRU that, unlike
PG_active, persists across deactivation and even reclaim (we store it in
the page cache / swapper cache tree until the page refaults).
So if fuse accepts pages that can legally have PG_active set,
PG_workingset is fine too."
Reported-by: Thomas Lindroth <thomas.lindroth@gmail.com>
Fixes: 1899ad18c607 ("mm: workingset: tell cache transitions from workingset thrashing")
Cc: <stable@vger.kernel.org> # v4.20
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9acc89d31f0c94c8e573ed61f3e4340bbd526d0c upstream.
EVM_ALLOW_METADATA_WRITES is an EVM initialization flag that can be set to
temporarily disable metadata verification until all xattrs/attrs necessary
to verify an EVM portable signature are copied to the file. This flag is
cleared when EVM is initialized with an HMAC key, to avoid that the HMAC is
calculated on unverified xattrs/attrs.
Currently EVM unnecessarily denies setting this flag if EVM is initialized
with a public key, which is not a concern as it cannot be used to trust
xattrs/attrs updates. This patch removes this limitation.
Fixes: ae1ba1676b88e ("EVM: Allow userland to permit modification of EVM-protected metadata")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.16.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9eea2904292c2d8fa98df141d3bf7c41ec9dc1b5 upstream.
evm_inode_init_security() requires an HMAC key to calculate the HMAC on
initial xattrs provided by LSMs. However, it checks generically whether a
key has been loaded, including also public keys, which is not correct as
public keys are not suitable to calculate the HMAC.
Originally, support for signature verification was introduced to verify a
possibly immutable initial ram disk, when no new files are created, and to
switch to HMAC for the root filesystem. By that time, an HMAC key should
have been loaded and usable to calculate HMACs for new files.
More recently support for requiring an HMAC key was removed from the
kernel, so that signature verification can be used alone. Since this is a
legitimate use case, evm_inode_init_security() should not return an error
when no HMAC key has been loaded.
This patch fixes this problem by replacing the evm_key_loaded() check with
a check of the EVM_INIT_HMAC flag in evm_initialized.
Fixes: 26ddabfe96b ("evm: enable EVM when X509 certificate is loaded")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Cc: stable@vger.kernel.org # 4.5.x
Signed-off-by: Mimi Zohar <zohar@linux.ibm.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7c6986ade69e3c81bac831645bc72109cd798a80 upstream.
In raise_backtrace_ipi() we iterate through the cpumask of CPUs, sending
each an IPI asking them to do a backtrace, but we don't wait for the
backtrace to happen.
We then iterate through the CPU mask again, and if any CPU hasn't done
the backtrace and cleared itself from the mask, we print a trace on its
behalf, noting that the trace may be "stale".
This works well enough when a CPU is not responding, because in that
case it doesn't receive the IPI and the sending CPU is left to print the
trace. But when all CPUs are responding we are left with a race between
the sending and receiving CPUs, if the sending CPU wins the race then it
will erroneously print a trace.
This leads to spurious "stale" traces from the sending CPU, which can
then be interleaved messily with the receiving CPU, note the CPU
numbers, eg:
[ 1658.929157][ C7] rcu: Stack dump where RCU GP kthread last ran:
[ 1658.929223][ C7] Sending NMI from CPU 7 to CPUs 1:
[ 1658.929303][ C1] NMI backtrace for cpu 1
[ 1658.929303][ C7] CPU 1 didn't respond to backtrace IPI, inspecting paca.
[ 1658.929362][ C1] CPU: 1 PID: 325 Comm: kworker/1:1H Tainted: G W E 5.13.0-rc2+ #46
[ 1658.929405][ C7] irq_soft_mask: 0x01 in_mce: 0 in_nmi: 0 current: 325 (kworker/1:1H)
[ 1658.929465][ C1] Workqueue: events_highpri test_work_fn [test_lockup]
[ 1658.929549][ C7] Back trace of paca->saved_r1 (0xc0000000057fb400) (possibly stale):
[ 1658.929592][ C1] NIP: c00000000002cf50 LR: c008000000820178 CTR: c00000000002cfa0
To fix it, change the logic so that the sending CPU waits 5s for the
receiving CPU to print its trace. If the receiving CPU prints its trace
successfully then the sending CPU just continues, avoiding any spurious
"stale" trace.
This has the added benefit of allowing all CPUs to print their traces in
order and avoids any interleaving of their output.
Fixes: 5cc05910f26e ("powerpc/64s: Wire up arch_trigger_cpumask_backtrace()")
Cc: stable@vger.kernel.org # v4.18+
Reported-by: Nathan Lynch <nathanl@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20210625140408.3351173-1-mpe@ellerman.id.au
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a2cbc58d6c9d90cd74288cc497c2b45815bc064 upstream.
Since the raw memory 'data' does not go forward, it will dump repeated
data if the data length is more than 8. If we want to dump longer data
blocks, we need to repeatedly call macro SEQ_PUT_HEX_FIELD. I think it
is a bit redundant, and multiple function calls also affect the performance.
Link: https://lore.kernel.org/lkml/20210625122453.5e2fe304@oasis.local.home/
Link: https://lkml.kernel.org/r/20210626032156.47889-2-yun.zhou@windriver.com
Cc: stable@vger.kernel.org
Fixes: 6d2289f3faa7 ("tracing: Make trace_seq_putmem_hex() more robust")
Signed-off-by: Yun Zhou <yun.zhou@windriver.com>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9913d5745bd720c4266805c8d29952a3702e4eca upstream.
All internal use cases for tracepoint_probe_register() is set to not ever
be called with the same function and data. If it is, it is considered a
bug, as that means the accounting of handling tracepoints is corrupted.
If the function and data for a tracepoint is already registered when
tracepoint_probe_register() is called, it will call WARN_ON_ONCE() and
return with EEXISTS.
The BPF system call can end up calling tracepoint_probe_register() with
the same data, which now means that this can trigger the warning because
of a user space process. As WARN_ON_ONCE() should not be called because
user space called a system call with bad data, there needs to be a way to
register a tracepoint without triggering a warning.
Enter tracepoint_probe_register_may_exist(), which can be called, but will
not cause a WARN_ON() if the probe already exists. It will still error out
with EEXIST, which will then be sent to the user space that performed the
BPF system call.
This keeps the previous testing for issues with other users of the
tracepoint code, while letting BPF call it with duplicated data and not
warn about it.
Link: https://lore.kernel.org/lkml/20210626135845.4080-1-penguin-kernel@I-love.SAKURA.ne.jp/
Link: https://syzkaller.appspot.com/bug?id=41f4318cf01762389f4d1c1c459da4f542fe5153
Cc: stable@vger.kernel.org
Fixes: c4f6699dfcb85 ("bpf: introduce BPF_RAW_TRACEPOINT")
Reported-by: syzbot <syzbot+721aa903751db87aa244@syzkaller.appspotmail.com>
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Tested-by: syzbot+721aa903751db87aa244@syzkaller.appspotmail.com
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26c563731056c3ee66f91106c3078a8c36bb7a9e upstream.
With the addition of simple mathematical operations (plus and minus), the
parsing of the "sym-offset" modifier broke, as it took the '-' part of the
"sym-offset" as a minus, and tried to break it up into a mathematical
operation of "field.sym - offset", in which case it failed to parse
(unless the event had a field called "offset").
Both .sym and .sym-offset modifiers should not be entered into
mathematical calculations anyway. If ".sym-offset" is found in the
modifier, then simply make it not an operation that can be calculated on.
Link: https://lkml.kernel.org/r/20210707110821.188ae255@oasis.local.home
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Daniel Bristot de Oliveira <bristot@redhat.com>
Cc: stable@vger.kernel.org
Fixes: 100719dcef447 ("tracing: Add simple expression support to hist triggers")
Reviewed-by: Tom Zanussi <zanussi@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 314538041b5632ffaf64798faaeabaf2793fe029 upstream.
In AP mode WPA2-PSK connections were not established.
The reason was that the AP was sending the first message
of the 4 way handshake encrypted, even though no pairwise
key had (correctly) yet been set.
Encryption was enabled if the "security_enable" driver flag
was set and encryption was not explicitly disabled by
IEEE80211_TX_INTFL_DONT_ENCRYPT.
However security_enable was set when *any* key, including
the AP GTK key, had been set which was causing unwanted
encryption even if no key was avaialble for the unicast
packet to be sent.
Fix this by adding a check that we have a key and drop
the old security_enable driver flag which is insufficient
and redundant.
The Redpine downstream out of tree driver does it this way too.
Regarding the Fixes tag the actual code being modified was
introduced earlier, with the original driver submission, in
dad0d04fa7ba ("rsi: Add RS9113 wireless driver"), however
at that time AP mode was not yet supported so there was
no bug at that point.
So I have tagged the introduction of AP support instead
which was part of the patch set "rsi: support for AP mode" [1]
It is not clear whether AP WPA has ever worked, I can see nothing
on the kernel side that broke it afterwards yet the AP support
patch series says "Tests are performed to confirm aggregation,
connections in WEP and WPA/WPA2 security."
One possibility is that the initial tests were done with a modified
userspace (hostapd).
[1] https://www.spinics.net/lists/linux-wireless/msg165302.html
Signed-off-by: Martin Fuzzey <martin.fuzzey@flowbird.group>
Fixes: 38ef62353acb ("rsi: security enhancements for AP mode")
CC: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/1622564459-24430-1-git-send-email-martin.fuzzey@flowbird.group
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b1c3a24897bd528f2f4fda9fea7da08a84ae25b6 upstream.
The RSI_RATE_x bits must be assigned to struct rsi_data_desc rate_info
field. The rest of the driver does it correctly, except this one place,
so fix it. This is also aligned with the RSI downstream vendor driver.
Without this patch, an AP operating at 5 GHz does not transmit any
beacons at all, this patch fixes that.
Fixes: d26a9559403c ("rsi: add beacon changes for AP mode")
Signed-off-by: Marek Vasut <marex@denx.de>
Cc: Amitkumar Karwar <amit.karwar@redpinesignals.com>
Cc: Angus Ainslie <angus@akkea.ca>
Cc: David S. Miller <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: Karun Eagalapati <karun256@gmail.com>
Cc: Martin Kepplinger <martink@posteo.de>
Cc: Prameela Rani Garnepudi <prameela.j04cs@gmail.com>
Cc: Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: netdev@vger.kernel.org
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210507213105.140138-1-marex@denx.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 47ec636f7a25aa2549e198c48ecb6b1c25d05456 upstream.
It doesn't make sense to clobber the const driver-side buffer, if a
write-to-device attempt failed. All other SSB variants (PCI, PCMCIA and SoC)
also don't corrupt the buffer on any failure in block_write.
Therefore, remove this memset from the SDIO variant.
Signed-off-by: Michael Büsch <m@bues.ch>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210515210252.318be2ba@wiggum
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb312ac5ccb007e843f982b38d4d6886ba4b32f2 upstream.
I got this crash more times during debugging of PCIe controller and crash
happens somehow at the time when PCIe kernel code started link retraining (as
part of ASPM code) when at the same time PCIe link went down and ath9k probably
executed hw reset procedure.
Currently I'm not able to reproduce this issue as it looks like to be
some race condition between link training, ASPM, link down and reset
path. And as always, race conditions which depends on more input
parameters are hard to reproduce as it depends on precise timings.
But it is clear that pointers are zero in this case and should be
properly filled as same code pattern is used in ath9k_stop() function.
Anyway I was able to reproduce this crash by manually triggering ath
reset worker prior putting card up. I created simple patch to export
reset functionality via debugfs and use it to "simulate" of triggering
reset. s proved that NULL-pointer dereference issue is there.
Function ath9k_hw_reset() is dereferencing chan structure pointer, so it
needs to be non-NULL pointer.
Function ath9k_stop() already contains code which sets ah->curchan to valid
non-NULL pointer prior calling ath9k_hw_reset() function.
Add same code pattern also into ath_reset_internal() function to prevent
kernel NULL pointer dereference in ath9k_hw_reset() function.
This change fixes kernel NULL pointer dereference in ath9k_hw_reset() which
is caused by calling ath9k_hw_reset() from ath_reset_internal() with NULL
chan structure.
[ 45.334305] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000008
[ 45.344417] Mem abort info:
[ 45.347301] ESR = 0x96000005
[ 45.350448] EC = 0x25: DABT (current EL), IL = 32 bits
[ 45.356166] SET = 0, FnV = 0
[ 45.359350] EA = 0, S1PTW = 0
[ 45.362596] Data abort info:
[ 45.365756] ISV = 0, ISS = 0x00000005
[ 45.369735] CM = 0, WnR = 0
[ 45.372814] user pgtable: 4k pages, 39-bit VAs, pgdp=000000000685d000
[ 45.379663] [0000000000000008] pgd=0000000000000000, p4d=0000000000000000, pud=0000000000000000
[ 45.388856] Internal error: Oops: 96000005 [#1] SMP
[ 45.393897] Modules linked in: ath9k ath9k_common ath9k_hw
[ 45.399574] CPU: 1 PID: 309 Comm: kworker/u4:2 Not tainted 5.12.0-rc2-dirty #785
[ 45.414746] Workqueue: phy0 ath_reset_work [ath9k]
[ 45.419713] pstate: 40000005 (nZcv daif -PAN -UAO -TCO BTYPE=--)
[ 45.425910] pc : ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw]
[ 45.431234] lr : ath9k_hw_reset+0xc0/0x1c48 [ath9k_hw]
[ 45.436548] sp : ffffffc0118dbca0
[ 45.439961] x29: ffffffc0118dbca0 x28: 0000000000000000
[ 45.445442] x27: ffffff800dee4080 x26: 0000000000000000
[ 45.450923] x25: ffffff800df9b9d8 x24: 0000000000000000
[ 45.456404] x23: ffffffc0115f6000 x22: ffffffc008d0d408
[ 45.461885] x21: ffffff800dee5080 x20: ffffff800df9b9d8
[ 45.467366] x19: 0000000000000000 x18: 0000000000000000
[ 45.472846] x17: 0000000000000000 x16: 0000000000000000
[ 45.478326] x15: 0000000000000010 x14: ffffffffffffffff
[ 45.483807] x13: ffffffc0918db94f x12: ffffffc011498720
[ 45.489289] x11: 0000000000000003 x10: ffffffc0114806e0
[ 45.494770] x9 : ffffffc01014b2ec x8 : 0000000000017fe8
[ 45.500251] x7 : c0000000ffffefff x6 : 0000000000000001
[ 45.505733] x5 : 0000000000000000 x4 : 0000000000000000
[ 45.511213] x3 : 0000000000000000 x2 : ffffff801fece870
[ 45.516693] x1 : ffffffc00eded000 x0 : 000000000000003f
[ 45.522174] Call trace:
[ 45.524695] ath9k_hw_reset+0xc4/0x1c48 [ath9k_hw]
[ 45.529653] ath_reset_internal+0x1a8/0x2b8 [ath9k]
[ 45.534696] ath_reset_work+0x2c/0x40 [ath9k]
[ 45.539198] process_one_work+0x210/0x480
[ 45.543339] worker_thread+0x5c/0x510
[ 45.547115] kthread+0x12c/0x130
[ 45.550445] ret_from_fork+0x10/0x1c
[ 45.554138] Code: 910922c2 9117e021 95ff0398 b4000294 (b9400a61)
[ 45.560430] ---[ end trace 566410ba90b50e8b ]---
[ 45.565193] Kernel panic - not syncing: Oops: Fatal exception in interrupt
[ 45.572282] SMP: stopping secondary CPUs
[ 45.576331] Kernel Offset: disabled
[ 45.579924] CPU features: 0x00040002,0000200c
[ 45.584416] Memory Limit: none
[ 45.587564] Rebooting in 3 seconds..
Signed-off-by: Pali Rohár <pali@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20210402122653.24014-1-pali@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
