Brian King e555db930f [SCSI] use sysfs configured timeout for EH Start Unit timeout
Use the sysfs configurable timeout when issuing a START_UNIT
command from the scsi error handler. This is needed for devices which
take longer than thirty seconds to respond to the start
unit. The problem was observed when sending a start unit
to a disk array device in an ipr RAID adapter, which results
in the adapter firmware sending potentially multiple commands
to physical devices as a result of this command, which ended
up timing out sometimes. This patch does not change the default
value used for this command.

Signed-off-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>
2007-05-06 09:33:12 -05:00
..
2007-04-01 10:10:04 -05:00
2006-09-12 17:12:31 -05:00
2006-09-12 17:12:31 -05:00
2007-02-07 18:32:18 -05:00
2007-05-06 09:33:11 -05:00
2007-04-27 15:19:27 -07:00
2006-08-06 15:59:26 -05:00
2006-11-15 16:41:27 -06:00
2006-09-12 17:12:31 -05:00
2007-02-17 02:40:24 +01:00
2006-11-22 14:57:56 +00:00
2007-04-01 11:19:39 -05:00
2006-09-23 15:33:43 -05:00
2007-03-11 11:28:09 -05:00
2007-05-02 19:02:37 -07:00
2006-12-05 10:25:35 -06:00
2006-09-12 17:12:31 -05:00
2006-11-30 05:24:39 +01:00
2006-11-22 14:57:56 +00:00
2006-11-22 14:57:56 +00:00
2007-01-27 09:28:58 -06:00
2007-04-17 18:15:04 -04:00
2007-02-09 09:14:07 -08:00
2006-11-22 14:57:56 +00:00
2007-03-11 11:17:49 -05:00
2007-04-17 18:15:04 -04:00
2007-01-03 16:57:38 -06:00
2007-01-13 13:49:58 -06:00
2007-04-17 18:15:04 -04:00
2006-03-23 07:38:09 -08:00
2007-04-17 18:15:04 -04:00
2006-11-15 16:43:50 -06:00
2007-05-05 14:23:40 -07:00