Milo Kim d5aa11bfe9 mfd: Add TI LMU driver
TI LMU (Lighting Management Unit) driver supports lighting devices below.

  LM3532, LM3631, LM3632, LM3633, LM3695 and LM3697.

LMU devices have common features.
  - I2C interface for accessing device registers
  - Hardware enable pin control
  - Backlight brightness control
  - Notifier for hardware fault monitoring
  - Regulators for LCD display bias

It contains fault monitor, backlight, LED and regulator driver.

LMU fault monitor
-----------------
  LM3633 and LM3697 provide hardware monitoring feature.
  It enables open or short circuit detection.
  After monitoring is done, each device should be re-initialized.
  Notifier is used for this case.
  Separate patch for 'ti-lmu-fault-monitor' will be sent later.

Backlight
---------
  It's handled by TI LMU backlight consolidated driver and
  chip dependent data. Separate patchset will be sent later.

LED indicator
-------------
  LM3633 has 6 indicator LEDs. Programmable dimming pattern is also
  supported. Separate patch for 'leds-lm3633' will be sent later.

Regulator
---------
  LM3631 has 5 regulators for the display bias.
  LM3632 supports 3 regulators. One consolidated driver enables it.
  The lm363x regulator driver is already upstreamed.

Signed-off-by: Milo Kim <milo.kim@ti.com>
Tested-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Lee Jones <lee.jones@linaro.org>
2017-04-27 09:25:04 +01:00
..
2016-04-19 07:58:06 +01:00
2016-11-29 08:21:33 +00:00
2015-11-06 10:23:50 -08:00
2016-05-20 11:10:24 -07:00
2016-12-19 08:16:26 -08:00
2017-04-27 09:25:04 +01:00
2017-04-27 09:25:04 +01:00
2015-10-30 17:19:51 +00:00
2015-10-30 17:19:51 +00:00
2016-08-10 09:25:18 +01:00
2016-08-10 09:25:18 +01:00
2017-04-27 09:25:04 +01:00
2015-08-11 15:09:01 +01:00
2015-08-11 15:09:01 +01:00
2015-09-04 11:46:02 -07:00