Chris Packham b28b9149b3 spi: orion: Handle GPIO chip-selects
Some hardware designs use GPIOs to add (or supplement) the SPI
chip-select so that more than one SPI slave device can be used.

For this to work with the spi-orion driver the SPI_MASTER_GPIO_SS flag
needs to be set (because the other outputs are gated internally by the
CS) and the correct chip-select (in this case CS0) needs to be driven by
the controller.

Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Signed-off-by: Mark Brown <broonie@kernel.org>
2017-05-24 18:02:43 +01:00
..
2017-02-20 17:26:11 -08:00
2016-08-19 16:24:39 +01:00
2016-07-07 11:44:43 +02:00
2015-12-07 20:09:09 +00:00
2017-01-23 18:09:37 +00:00
2017-03-13 16:48:40 +00:00