7f464532b0
Setting 'additionalProperties: false' is frequently omitted, but is important in order to check that there aren't extra undocumented properties in a binding. Ideally, we'd just add this automatically and make this the default, but there's some cases where it doesn't work. For example, if a common schema is referenced, then properties in the common schema aren't part of what's considered for 'additionalProperties'. Also, sometimes there are bus specific properties such as 'spi-max-frequency' that go into bus child nodes, but aren't defined in the child node's schema. So let's stick with the json-schema defined default and add 'additionalProperties: false' where needed. This will be a continual review comment and game of wack-a-mole. Signed-off-by: Rob Herring <robh@kernel.org> Reviewed-by: Neil Armstrong <narmstrong@baylibre.com> Acked-by: Mark Brown <broonie@kernel.org> Acked-by: Jonathan Cameron <Jonathan.Cameron@huawei.com> Acked-by: Alexandru Ardelean <alexandru.ardelean@analog.com> Reviewed-by: Benjamin Gaignard <benjamin.gaignard@st.com> Acked-by: Stephen Boyd <sboyd@kernel.org> # clock Acked-by: Lee Jones <lee.jones@linaro.org>
45 lines
899 B
YAML
45 lines
899 B
YAML
# SPDX-License-Identifier: GPL-2.0-or-later
|
|
# Copyright 2019 Lubomir Rintel <lkundrak@v3.sk>
|
|
%YAML 1.2
|
|
---
|
|
$id: "http://devicetree.org/schemas/phy/marvell,mmp3-hsic-phy.yaml#"
|
|
$schema: "http://devicetree.org/meta-schemas/core.yaml#"
|
|
|
|
title: Marvell MMP3 HSIC PHY
|
|
|
|
maintainers:
|
|
- Lubomir Rintel <lkundrak@v3.sk>
|
|
|
|
properties:
|
|
compatible:
|
|
const: marvell,mmp3-hsic-phy
|
|
|
|
reg:
|
|
maxItems: 1
|
|
description: base address of the device
|
|
|
|
reset-gpios:
|
|
maxItems: 1
|
|
description: GPIO connected to reset
|
|
|
|
"#phy-cells":
|
|
const: 0
|
|
|
|
required:
|
|
- compatible
|
|
- reg
|
|
- reset-gpios
|
|
- "#phy-cells"
|
|
|
|
additionalProperties: false
|
|
|
|
examples:
|
|
- |
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
hsic-phy@f0001800 {
|
|
compatible = "marvell,mmp3-hsic-phy";
|
|
reg = <0xf0001800 0x40>;
|
|
reset-gpios = <&gpio 63 GPIO_ACTIVE_HIGH>;
|
|
#phy-cells = <0>;
|
|
};
|