Yoshihiro Shimoda 8c85f4b812 net: phy: micrel: add toggling phy reset if PHY is not attached
This patch adds toggling phy reset if PHY is not attached. Otherwise,
some boards (e.g. R-Car H3 Salvator-XS) cannot link up correctly if
we do the following method:

 1) Kernel boots by using initramfs.
 --> No open the nic, so phy_device_register() and phy_probe()
     deasserts the reset.
 2) Kernel enters the suspend.
 --> So, keep the reset signal as deassert.
 --> On R-Car Salvator-XS board, unfortunately, the board power is
     turned off.
 3) Kernel returns from suspend.
 4) ifconfig eth0 up
 --> Then, since edge signal of the reset doesn't happen,
     it cannot link up.
 5) ifconfig eth0 down
 6) ifconfig eth0 up
 --> In this case, it can link up.

Reported-by: Hiromitsu Yamasaki <hiromitsu.yamasaki.ym@renesas.com>
Signed-off-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
2018-12-03 15:20:18 -08:00
..
2018-11-01 18:34:46 -07:00
2018-11-16 09:31:59 -06:00
2018-10-29 15:16:01 -07:00
2018-10-27 09:24:24 -07:00
2018-10-25 06:50:48 -07:00
2018-10-16 11:13:50 +02:00
2018-10-11 12:12:55 +02:00
2018-11-09 17:56:44 +01:00
2018-10-29 10:38:10 -07:00
2018-11-08 17:49:04 -06:00
2018-11-02 11:25:48 -07:00
2018-10-31 16:47:55 -07:00
2018-10-25 06:31:56 -07:00
2018-11-09 16:41:58 -06:00
2018-10-26 14:36:21 -07:00
2018-10-22 17:30:06 +01:00
2018-10-26 08:14:13 -07:00
2018-11-01 08:42:21 -07:00
2018-10-26 12:09:58 -07:00
2018-10-29 15:16:01 -07:00
2018-11-22 08:31:46 -08:00
2018-10-31 08:54:16 -07:00
2018-11-28 08:33:55 -08:00
2018-10-11 09:16:44 -07:00
2018-11-10 13:32:14 -06:00
2018-11-11 09:21:46 -08:00
2018-11-22 08:39:29 -08:00
2018-10-31 11:01:38 -07:00
2018-11-01 14:42:49 -07:00
2018-10-31 11:41:37 -07:00
2018-11-10 08:58:48 -06:00