Nicolas Pitre 3ec0d47427 [ARM] Kirkwood: SheevaPlug USB Power Enable setup ...

Ideally, the default should be set to 0 and let the EHCI driver turn
it on as needed.  This makes USB usable in the mean time.

Signed-off-by: Nicolas Pitre <nico@marvell.com>

2009-03-15 22:08:33 -04:00

..

include/mach

[ARM] Kirkwood: SDIO driver registration for DB6281 and RD6281

2009-02-26 20:22:26 -05:00

addr-map.c

[ARM] Kirkwood: allow configuring mbus window for on-chip sram

2008-09-25 16:27:22 -04:00

common.c

[ARM] Kirkwood: register internal devices in a common place

2009-02-26 22:55:59 -05:00

common.h

[ARM] Kirkwood: register internal devices in a common place

2009-02-26 22:55:59 -05:00

db88f6281-bp-setup.c

[ARM] Kirkwood: register internal devices in a common place

2009-02-26 22:55:59 -05:00

irq.c

[ARM] 5401/1: Orion: fix edge triggered GPIO interrupt support

2009-02-17 22:37:09 +00:00

Kconfig

[ARM] Kirkwood: Marvell SheevaPlug support

2009-03-15 22:04:54 -04:00

Makefile

[ARM] Kirkwood: Marvell SheevaPlug support

2009-03-15 22:04:54 -04:00

Makefile.boot

[ARM] add Marvell Kirkwood (88F6000) SoC support

2008-06-22 22:45:06 +02:00

mpp.c

[ARM] Kirkwood: MPP initialization code

2009-02-19 22:27:52 -05:00

mpp.h

[ARM] Kirkwood: MPP initialization code

2009-02-19 22:27:52 -05:00

pcie.c

[ARM] 5359/1: Kirkwood: fix compilation error

2009-01-08 16:29:40 +00:00

rd88f6192-nas-setup.c

[ARM] Kirkwood: register internal devices in a common place

2009-02-26 22:55:59 -05:00

rd88f6281-setup.c

[ARM] Kirkwood: register internal devices in a common place

2009-02-26 22:55:59 -05:00

sheevaplug-setup.c

[ARM] Kirkwood: SheevaPlug USB Power Enable setup

2009-03-15 22:08:33 -04:00