Go to file
Greg Kroah-Hartman 0ddb73d446 Merge 5.10.166 into android12-5.10-lts
Changes in 5.10.166
	clk: generalize devm_clk_get() a bit
	clk: Provide new devm_clk helpers for prepared and enabled clocks
	memory: atmel-sdramc: Fix missing clk_disable_unprepare in atmel_ramc_probe()
	memory: mvebu-devbus: Fix missing clk_disable_unprepare in mvebu_devbus_probe()
	ARM: dts: imx6ul-pico-dwarf: Use 'clock-frequency'
	ARM: dts: imx7d-pico: Use 'clock-frequency'
	ARM: dts: imx6qdl-gw560x: Remove incorrect 'uart-has-rtscts'
	arm64: dts: imx8mm-beacon: Fix ecspi2 pinmux
	ARM: imx: add missing of_node_put()
	HID: intel_ish-hid: Add check for ishtp_dma_tx_map
	EDAC/highbank: Fix memory leak in highbank_mc_probe()
	firmware: arm_scmi: Harden shared memory access in fetch_response
	firmware: arm_scmi: Harden shared memory access in fetch_notification
	tomoyo: fix broken dependency on *.conf.default
	RDMA/core: Fix ib block iterator counter overflow
	IB/hfi1: Reject a zero-length user expected buffer
	IB/hfi1: Reserve user expected TIDs
	IB/hfi1: Fix expected receive setup error exit issues
	IB/hfi1: Immediately remove invalid memory from hardware
	IB/hfi1: Remove user expected buffer invalidate race
	affs: initialize fsdata in affs_truncate()
	PM: AVS: qcom-cpr: Fix an error handling path in cpr_probe()
	phy: ti: fix Kconfig warning and operator precedence
	ARM: dts: at91: sam9x60: fix the ddr clock for sam9x60
	amd-xgbe: TX Flow Ctrl Registers are h/w ver dependent
	amd-xgbe: Delay AN timeout during KR training
	bpf: Fix pointer-leak due to insufficient speculative store bypass mitigation
	phy: rockchip-inno-usb2: Fix missing clk_disable_unprepare() in rockchip_usb2phy_power_on()
	net: nfc: Fix use-after-free in local_cleanup()
	net: wan: Add checks for NULL for utdm in undo_uhdlc_init and unmap_si_regs
	gpio: mxc: Always set GPIOs used as interrupt source to INPUT mode
	wifi: rndis_wlan: Prevent buffer overflow in rndis_query_oid
	net/sched: sch_taprio: fix possible use-after-free
	l2tp: Serialize access to sk_user_data with sk_callback_lock
	l2tp: Don't sleep and disable BH under writer-side sk_callback_lock
	l2tp: convert l2tp_tunnel_list to idr
	l2tp: close all race conditions in l2tp_tunnel_register()
	net: usb: sr9700: Handle negative len
	net: mdio: validate parameter addr in mdiobus_get_phy()
	HID: check empty report_list in hid_validate_values()
	HID: check empty report_list in bigben_probe()
	net: stmmac: fix invalid call to mdiobus_get_phy()
	HID: revert CHERRY_MOUSE_000C quirk
	usb: gadget: f_fs: Prevent race during ffs_ep0_queue_wait
	usb: gadget: f_fs: Ensure ep0req is dequeued before free_request
	net: mlx5: eliminate anonymous module_init & module_exit
	drm/panfrost: fix GENERIC_ATOMIC64 dependency
	dmaengine: Fix double increment of client_count in dma_chan_get()
	net: macb: fix PTP TX timestamp failure due to packet padding
	l2tp: prevent lockdep issue in l2tp_tunnel_register()
	HID: betop: check shape of output reports
	dmaengine: xilinx_dma: call of_node_put() when breaking out of for_each_child_of_node()
	nvme-pci: fix timeout request state check
	tcp: avoid the lookup process failing to get sk in ehash table
	w1: fix deadloop in __w1_remove_master_device()
	w1: fix WARNING after calling w1_process()
	driver core: Fix test_async_probe_init saves device in wrong array
	net: dsa: microchip: ksz9477: port map correction in ALU table entry register
	tcp: fix rate_app_limited to default to 1
	scsi: iscsi: Fix multiple iSCSI session unbind events sent to userspace
	cpufreq: Add Tegra234 to cpufreq-dt-platdev blocklist
	kcsan: test: don't put the expect array on the stack
	ASoC: fsl_micfil: Correct the number of steps on SX controls
	drm: Add orientation quirk for Lenovo ideapad D330-10IGL
	s390/debug: add _ASM_S390_ prefix to header guard
	cpufreq: armada-37xx: stop using 0 as NULL pointer
	ASoC: fsl_ssi: Rename AC'97 streams to avoid collisions with AC'97 CODEC
	ASoC: fsl-asoc-card: Fix naming of AC'97 CODEC widgets
	spi: spidev: remove debug messages that access spidev->spi without locking
	KVM: s390: interrupt: use READ_ONCE() before cmpxchg()
	scsi: hisi_sas: Set a port invalid only if there are no devices attached when refreshing port id
	platform/x86: touchscreen_dmi: Add info for the CSL Panther Tab HD
	platform/x86: asus-nb-wmi: Add alternate mapping for KEY_SCREENLOCK
	lockref: stop doing cpu_relax in the cmpxchg loop
	Revert "selftests/bpf: check null propagation only neither reg is PTR_TO_BTF_ID"
	netfilter: conntrack: do not renew entry stuck in tcp SYN_SENT state
	x86: ACPI: cstate: Optimize C3 entry on AMD CPUs
	fs: reiserfs: remove useless new_opts in reiserfs_remount
	sysctl: add a new register_sysctl_init() interface
	kernel/panic: move panic sysctls to its own file
	panic: unset panic_on_warn inside panic()
	ubsan: no need to unset panic_on_warn in ubsan_epilogue()
	kasan: no need to unset panic_on_warn in end_report()
	exit: Add and use make_task_dead.
	objtool: Add a missing comma to avoid string concatenation
	hexagon: Fix function name in die()
	h8300: Fix build errors from do_exit() to make_task_dead() transition
	csky: Fix function name in csky_alignment() and die()
	ia64: make IA64_MCA_RECOVERY bool instead of tristate
	panic: Separate sysctl logic from CONFIG_SMP
	exit: Put an upper limit on how often we can oops
	exit: Expose "oops_count" to sysfs
	exit: Allow oops_limit to be disabled
	panic: Consolidate open-coded panic_on_warn checks
	panic: Introduce warn_limit
	panic: Expose "warn_count" to sysfs
	docs: Fix path paste-o for /sys/kernel/warn_count
	exit: Use READ_ONCE() for all oops/warn limit reads
	Bluetooth: hci_sync: cancel cmd_timer if hci_open failed
	xhci: Set HCD flag to defer primary roothub registration
	scsi: hpsa: Fix allocation size for scsi_host_alloc()
	module: Don't wait for GOING modules
	tracing: Make sure trace_printk() can output as soon as it can be used
	trace_events_hist: add check for return value of 'create_hist_field'
	ftrace/scripts: Update the instructions for ftrace-bisect.sh
	cifs: Fix oops due to uncleared server->smbd_conn in reconnect
	KVM: x86/vmx: Do not skip segment attributes if unusable bit is set
	thermal: intel: int340x: Protect trip temperature from concurrent updates
	ARM: 9280/1: mm: fix warning on phys_addr_t to void pointer assignment
	EDAC/device: Respect any driver-supplied workqueue polling value
	EDAC/qcom: Do not pass llcc_driv_data as edac_device_ctl_info's pvt_info
	units: Add Watt units
	units: Add SI metric prefix definitions
	i2c: designware: Use DIV_ROUND_CLOSEST() macro
	i2c: designware: use casting of u64 in clock multiplication to avoid overflow
	netlink: prevent potential spectre v1 gadgets
	net: fix UaF in netns ops registration error path
	netfilter: nft_set_rbtree: Switch to node list walk for overlap detection
	netfilter: nft_set_rbtree: skip elements in transaction from garbage collection
	netlink: annotate data races around nlk->portid
	netlink: annotate data races around dst_portid and dst_group
	netlink: annotate data races around sk_state
	ipv4: prevent potential spectre v1 gadget in ip_metrics_convert()
	ipv4: prevent potential spectre v1 gadget in fib_metrics_match()
	netfilter: conntrack: fix vtag checks for ABORT/SHUTDOWN_COMPLETE
	netrom: Fix use-after-free of a listening socket.
	net/sched: sch_taprio: do not schedule in taprio_reset()
	sctp: fail if no bound addresses can be used for a given scope
	net: ravb: Fix possible hang if RIS2_QFF1 happen
	thermal: intel: int340x: Add locking to int340x_thermal_get_trip_type()
	net/tg3: resolve deadlock in tg3_reset_task() during EEH
	net: mdio-mux-meson-g12a: force internal PHY off on mux switch
	tools: gpio: fix -c option of gpio-event-mon
	Revert "Input: synaptics - switch touchpad on HP Laptop 15-da3001TU to RMI mode"
	nouveau: explicitly wait on the fence in nouveau_bo_move_m2mf
	nfsd: Ensure knfsd shuts down when the "nfsd" pseudofs is unmounted
	Revert "selftests/ftrace: Update synthetic event syntax errors"
	block: fix and cleanup bio_check_ro
	x86/i8259: Mark legacy PIC interrupts with IRQ_LEVEL
	netfilter: conntrack: unify established states for SCTP paths
	perf/x86/amd: fix potential integer overflow on shift of a int
	clk: Fix pointer casting to prevent oops in devm_clk_release()
	Linux 5.10.166

Change-Id: Ibf582f7504221c6ee1648da95c49b45e3678708c
Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
2023-02-17 12:18:56 +00:00
android ANDROID: Update .xml due to ABI preservation fix 2023-02-03 05:38:25 +00:00
arch Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
block Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
certs certs/blacklist_hashes.c: fix const confusion in certs blacklist 2022-06-22 14:13:17 +02:00
crypto This is the 5.10.163 stable release 2023-02-06 12:30:05 +00:00
Documentation Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
drivers Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
fs Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
include Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
init Merge tag 'android12-5.10.160_r00' into android12-5.10 2023-01-21 12:06:54 +00:00
io_uring Merge 5.10.165 into android12-5.10-lts 2023-02-16 16:43:59 +00:00
ipc ipc/sem: Fix dangling sem_array access in semtimedop race 2022-12-08 11:24:00 +01:00
kernel Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
lib Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
LICENSES LICENSES/deprecated: add Zlib license text 2020-09-16 14:33:49 +02:00
mm Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
net Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
samples This is the 5.10.163 stable release 2023-02-06 12:30:05 +00:00
scripts Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
security Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
sound Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
tools Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
usr FROMLIST: kbuild: Add environment variables for userprogs flags 2022-05-10 16:09:36 +00:00
virt kvm: Add support for arch compat vm ioctls 2022-10-30 09:41:15 +01:00
.clang-format RDMA 5.10 pull request 2020-10-17 11:18:18 -07:00
.cocciconfig
.get_maintainer.ignore Opt out of scripts/get_maintainer.pl 2019-05-16 10:53:40 -07:00
.gitattributes .gitattributes: use 'dts' diff driver for dts files 2019-12-04 19:44:11 -08:00
.gitignore Merge 5.10.38 into android12-5.10 2021-05-20 15:35:25 +02:00
.mailmap mailmap: add two more addresses of Uwe Kleine-König 2020-12-06 10:19:07 -08:00
build.config.aarch64 ANDROID: arm64: enable compat vdso 2021-05-13 09:14:25 -07:00
build.config.allmodconfig ANDROID: allmodconfig: disable WERROR 2023-01-09 19:34:08 +00:00
build.config.allmodconfig.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.allmodconfig.arm ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.allmodconfig.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.amlogic ANDROID: GKI: amlogic: add DTB overlays 2021-02-12 10:08:04 +01:00
build.config.arm ANDROID: enable LLVM_IAS=1 for clang's integrated assembler for arm 2021-03-24 09:21:58 -07:00
build.config.common ANDROID: fix KCFLAGS override by __ANDROID_COMMON_KERNEL__ 2022-04-29 20:20:21 +00:00
build.config.db845c ANDROID: db845c: Use FRAGMENT_CONFIG 2021-02-10 06:08:17 +00:00
build.config.gki ANDROID: gki: Removed cf modules from gki_defconfig 2020-02-01 00:27:50 +00:00
build.config.gki_kasan ANDROID: build.config: Disable LTO for KASAN and Kprobes builds 2021-03-08 00:31:49 +00:00
build.config.gki_kasan.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.gki_kasan.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.gki_kprobes ANDROID: build.config: Disable LTO for KASAN and Kprobes builds 2021-03-08 00:31:49 +00:00
build.config.gki_kprobes.aarch64 ANDROID: Adding kprobes build configs for Cuttlefish 2021-03-03 02:03:02 +00:00
build.config.gki_kprobes.x86_64 ANDROID: Adding kprobes build configs for Cuttlefish 2021-03-03 02:03:02 +00:00
build.config.gki-debug.aarch64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.gki-debug.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.gki.aarch64 ANDROID: force struct selinux_state to be defined in KMI 2022-09-22 19:37:51 +00:00
build.config.gki.aarch64.fips140 ANDROID: ABI: add new symbols required by fips140.ko 2021-10-29 14:32:49 -07:00
build.config.gki.aarch64.fips140_eval_testing ANDROID: fips140: support "evaluation testing" builds via build.sh 2021-11-30 17:55:05 +00:00
build.config.gki.x86_64 ANDROID: drop KERNEL_DIR setting in build.config.common 2020-08-31 15:20:37 +00:00
build.config.hikey960 ANDROID: Add hikey960 build infrastructure file 2021-02-18 23:59:34 +00:00
build.config.khwasan ANDROID: Add a build config fragment for KHWASan. 2021-04-06 10:01:56 +00:00
build.config.rockchip ANDROID: GKI: rockchip: update fragment file 2022-08-19 19:27:37 +00:00
build.config.x86_64 ANDROID: build.config: Add vmlinux.symvers and modules.builtin to DIST_DIR 2021-04-15 10:24:17 +01:00
COPYING COPYING: state that all contributions really are covered by this file 2020-02-10 13:32:20 -08:00
CREDITS MAINTAINERS: Move Jason Cooper to CREDITS 2020-11-30 10:20:34 +01:00
Kbuild kbuild: rename hostprogs-y/always to hostprogs/always-y 2020-02-04 01:53:07 +09:00
Kconfig kbuild: ensure full rebuild when the compiler is updated 2020-05-12 13:28:33 +09:00
MAINTAINERS This is the 5.10.163 stable release 2023-02-06 12:30:05 +00:00
Makefile Merge 5.10.166 into android12-5.10-lts 2023-02-17 12:18:56 +00:00
OWNERS ANDROID: Use authoritative Dr. No list from android-mainline 2021-07-22 15:25:25 +00:00
README Drop all 00-INDEX files from Documentation/ 2018-09-09 15:08:58 -06:00
README.md ANDROID: README: Add requirement for "Bug:" tag for FROMLIST 2020-05-01 15:36:12 -07:00

How do I submit patches to Android Common Kernels

  1. BEST: Make all of your changes to upstream Linux. If appropriate, backport to the stable releases. These patches will be merged automatically in the corresponding common kernels. If the patch is already in upstream Linux, post a backport of the patch that conforms to the patch requirements below.

    • Do not send patches upstream that contain only symbol exports. To be considered for upstream Linux, additions of EXPORT_SYMBOL_GPL() require an in-tree modular driver that uses the symbol -- so include the new driver or changes to an existing driver in the same patchset as the export.
    • When sending patches upstream, the commit message must contain a clear case for why the patch is needed and beneficial to the community. Enabling out-of-tree drivers or functionality is not not a persuasive case.
  2. LESS GOOD: Develop your patches out-of-tree (from an upstream Linux point-of-view). Unless these are fixing an Android-specific bug, these are very unlikely to be accepted unless they have been coordinated with kernel-team@android.com. If you want to proceed, post a patch that conforms to the patch requirements below.

Common Kernel patch requirements

  • All patches must conform to the Linux kernel coding standards and pass script/checkpatch.pl
  • Patches shall not break gki_defconfig or allmodconfig builds for arm, arm64, x86, x86_64 architectures (see https://source.android.com/setup/build/building-kernels)
  • If the patch is not merged from an upstream branch, the subject must be tagged with the type of patch: UPSTREAM:, BACKPORT:, FROMGIT:, FROMLIST:, or ANDROID:.
  • All patches must have a Change-Id: tag (see https://gerrit-review.googlesource.com/Documentation/user-changeid.html)
  • If an Android bug has been assigned, there must be a Bug: tag.
  • All patches must have a Signed-off-by: tag by the author and the submitter

Additional requirements are listed below based on patch type

Requirements for backports from mainline Linux: UPSTREAM:, BACKPORT:

  • If the patch is a cherry-pick from Linux mainline with no changes at all
    • tag the patch subject with UPSTREAM:.
    • add upstream commit information with a (cherry picked from commit ...) line
    • Example:
      • if the upstream commit message is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        UPSTREAM: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch requires any changes from the upstream version, tag the patch with BACKPORT: instead of UPSTREAM:.
    • use the same tags as UPSTREAM:
    • add comments about the changes under the (cherry picked from commit ...) line
    • Example:
        BACKPORT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        (cherry picked from commit c31e73121f4c1ec41143423ac6ce3ce6dafdcec1)
        [joe: Resolved minor conflict in drivers/foo/bar.c ]
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for other backports: FROMGIT:, FROMLIST:,

  • If the patch has been merged into an upstream maintainer tree, but has not yet been merged into Linux mainline
    • tag the patch subject with FROMGIT:
    • add info on where the patch came from as (cherry picked from commit <sha1> <repo> <branch>). This must be a stable maintainer branch (not rebased, so don't use linux-next for example).
    • if changes were required, use BACKPORT: FROMGIT:
    • Example:
      • if the commit message in the maintainer tree is
        important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>
  • then Joe Smith would upload the patch for the common kernel as
        FROMGIT: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        (cherry picked from commit 878a2fd9de10b03d11d2f622250285c7e63deace
         https://git.kernel.org/pub/scm/linux/kernel/git/foo/bar.git test-branch)
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch has been submitted to LKML, but not accepted into any maintainer tree
    • tag the patch subject with FROMLIST:
    • add a Link: tag with a link to the submittal on lore.kernel.org
    • add a Bug: tag with the Android bug (required for patches not accepted into a maintainer tree)
    • if changes were required, use BACKPORT: FROMLIST:
    • Example:
        FROMLIST: important patch from upstream

        This is the detailed description of the important patch

        Signed-off-by: Fred Jones <fred.jones@foo.org>

        Bug: 135791357
        Link: https://lore.kernel.org/lkml/20190619171517.GA17557@someone.com/
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>

Requirements for Android-specific patches: ANDROID:

  • If the patch is fixing a bug to Android-specific code
    • tag the patch subject with ANDROID:
    • add a Fixes: tag that cites the patch with the bug
    • Example:
        ANDROID: fix android-specific bug in foobar.c

        This is the detailed description of the important fix

        Fixes: 1234abcd2468 ("foobar: add cool feature")
        Change-Id: I4caaaa566ea080fa148c5e768bb1a0b6f7201c01
        Signed-off-by: Joe Smith <joe.smith@foo.org>
  • If the patch is a new feature
    • tag the patch subject with ANDROID:
    • add a Bug: tag with the Android bug (required for android-specific features)