android/android_kernel_xiaomi_sm8450
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
lineage-22.0
android_kernel_xiaomi_sm8450/drivers/net/Kconfig
Greg Kroah-Hartman f2eb31a498 Merge 5.10.119 into android12-5.10-lts 
Changes in 5.10.119
	lockdown: also lock down previous kgdb use
	staging: rtl8723bs: prevent ->Ssid overflow in rtw_wx_set_scan()
	KVM: x86: Properly handle APF vs disabled LAPIC situation
	KVM: x86/mmu: fix NULL pointer dereference on guest INVPCID
	tcp: change source port randomizarion at connect() time
	secure_seq: use the 64 bits of the siphash for port offset calculation
	media: vim2m: Register video device after setting up internals
	media: vim2m: initialize the media device earlier
	ACPI: sysfs: Make sparse happy about address space in use
	ACPI: sysfs: Fix BERT error region memory mapping
	random: avoid arch_get_random_seed_long() when collecting IRQ randomness
	random: remove dead code left over from blocking pool
	MAINTAINERS: co-maintain random.c
	MAINTAINERS: add git tree for random.c
	crypto: lib/blake2s - Move selftest prototype into header file
	crypto: blake2s - define shash_alg structs using macros
	crypto: x86/blake2s - define shash_alg structs using macros
	crypto: blake2s - remove unneeded includes
	crypto: blake2s - move update and final logic to internal/blake2s.h
	crypto: blake2s - share the "shash" API boilerplate code
	crypto: blake2s - optimize blake2s initialization
	crypto: blake2s - add comment for blake2s_state fields
	crypto: blake2s - adjust include guard naming
	crypto: blake2s - include <linux/bug.h> instead of <asm/bug.h>
	lib/crypto: blake2s: include as built-in
	lib/crypto: blake2s: move hmac construction into wireguard
	lib/crypto: sha1: re-roll loops to reduce code size
	lib/crypto: blake2s: avoid indirect calls to compression function for Clang CFI
	random: document add_hwgenerator_randomness() with other input functions
	random: remove unused irq_flags argument from add_interrupt_randomness()
	random: use BLAKE2s instead of SHA1 in extraction
	random: do not sign extend bytes for rotation when mixing
	random: do not re-init if crng_reseed completes before primary init
	random: mix bootloader randomness into pool
	random: harmonize "crng init done" messages
	random: use IS_ENABLED(CONFIG_NUMA) instead of ifdefs
	random: early initialization of ChaCha constants
	random: avoid superfluous call to RDRAND in CRNG extraction
	random: don't reset crng_init_cnt on urandom_read()
	random: fix typo in comments
	random: cleanup poolinfo abstraction
	random: cleanup integer types
	random: remove incomplete last_data logic
	random: remove unused extract_entropy() reserved argument
	random: rather than entropy_store abstraction, use global
	random: remove unused OUTPUT_POOL constants
	random: de-duplicate INPUT_POOL constants
	random: prepend remaining pool constants with POOL_
	random: cleanup fractional entropy shift constants
	random: access input_pool_data directly rather than through pointer
	random: selectively clang-format where it makes sense
	random: simplify arithmetic function flow in account()
	random: continually use hwgenerator randomness
	random: access primary_pool directly rather than through pointer
	random: only call crng_finalize_init() for primary_crng
	random: use computational hash for entropy extraction
	random: simplify entropy debiting
	random: use linear min-entropy accumulation crediting
	random: always wake up entropy writers after extraction
	random: make credit_entropy_bits() always safe
	random: remove use_input_pool parameter from crng_reseed()
	random: remove batched entropy locking
	random: fix locking in crng_fast_load()
	random: use RDSEED instead of RDRAND in entropy extraction
	random: get rid of secondary crngs
	random: inline leaves of rand_initialize()
	random: ensure early RDSEED goes through mixer on init
	random: do not xor RDRAND when writing into /dev/random
	random: absorb fast pool into input pool after fast load
	random: use simpler fast key erasure flow on per-cpu keys
	random: use hash function for crng_slow_load()
	random: make more consistent use of integer types
	random: remove outdated INT_MAX >> 6 check in urandom_read()
	random: zero buffer after reading entropy from userspace
	random: fix locking for crng_init in crng_reseed()
	random: tie batched entropy generation to base_crng generation
	random: remove ifdef'd out interrupt bench
	random: remove unused tracepoints
	random: add proper SPDX header
	random: deobfuscate irq u32/u64 contributions
	random: introduce drain_entropy() helper to declutter crng_reseed()
	random: remove useless header comment
	random: remove whitespace and reorder includes
	random: group initialization wait functions
	random: group crng functions
	random: group entropy extraction functions
	random: group entropy collection functions
	random: group userspace read/write functions
	random: group sysctl functions
	random: rewrite header introductory comment
	random: defer fast pool mixing to worker
	random: do not take pool spinlock at boot
	random: unify early init crng load accounting
	random: check for crng_init == 0 in add_device_randomness()
	random: pull add_hwgenerator_randomness() declaration into random.h
	random: clear fast pool, crng, and batches in cpuhp bring up
	random: round-robin registers as ulong, not u32
	random: only wake up writers after zap if threshold was passed
	random: cleanup UUID handling
	random: unify cycles_t and jiffies usage and types
	random: do crng pre-init loading in worker rather than irq
	random: give sysctl_random_min_urandom_seed a more sensible value
	random: don't let 644 read-only sysctls be written to
	random: replace custom notifier chain with standard one
	random: use SipHash as interrupt entropy accumulator
	random: make consistent usage of crng_ready()
	random: reseed more often immediately after booting
	random: check for signal and try earlier when generating entropy
	random: skip fast_init if hwrng provides large chunk of entropy
	random: treat bootloader trust toggle the same way as cpu trust toggle
	random: re-add removed comment about get_random_{u32,u64} reseeding
	random: mix build-time latent entropy into pool at init
	random: do not split fast init input in add_hwgenerator_randomness()
	random: do not allow user to keep crng key around on stack
	random: check for signal_pending() outside of need_resched() check
	random: check for signals every PAGE_SIZE chunk of /dev/[u]random
	random: allow partial reads if later user copies fail
	random: make random_get_entropy() return an unsigned long
	random: document crng_fast_key_erasure() destination possibility
	random: fix sysctl documentation nits
	init: call time_init() before rand_initialize()
	ia64: define get_cycles macro for arch-override
	s390: define get_cycles macro for arch-override
	parisc: define get_cycles macro for arch-override
	alpha: define get_cycles macro for arch-override
	powerpc: define get_cycles macro for arch-override
	timekeeping: Add raw clock fallback for random_get_entropy()
	m68k: use fallback for random_get_entropy() instead of zero
	riscv: use fallback for random_get_entropy() instead of zero
	mips: use fallback for random_get_entropy() instead of just c0 random
	arm: use fallback for random_get_entropy() instead of zero
	nios2: use fallback for random_get_entropy() instead of zero
	x86/tsc: Use fallback for random_get_entropy() instead of zero
	um: use fallback for random_get_entropy() instead of zero
	sparc: use fallback for random_get_entropy() instead of zero
	xtensa: use fallback for random_get_entropy() instead of zero
	random: insist on random_get_entropy() existing in order to simplify
	random: do not use batches when !crng_ready()
	random: use first 128 bits of input as fast init
	random: do not pretend to handle premature next security model
	random: order timer entropy functions below interrupt functions
	random: do not use input pool from hard IRQs
	random: help compiler out with fast_mix() by using simpler arguments
	siphash: use one source of truth for siphash permutations
	random: use symbolic constants for crng_init states
	random: avoid initializing twice in credit race
	random: move initialization out of reseeding hot path
	random: remove ratelimiting for in-kernel unseeded randomness
	random: use proper jiffies comparison macro
	random: handle latent entropy and command line from random_init()
	random: credit architectural init the exact amount
	random: use static branch for crng_ready()
	random: remove extern from functions in header
	random: use proper return types on get_random_{int,long}_wait()
	random: make consistent use of buf and len
	random: move initialization functions out of hot pages
	random: move randomize_page() into mm where it belongs
	random: unify batched entropy implementations
	random: convert to using fops->read_iter()
	random: convert to using fops->write_iter()
	random: wire up fops->splice_{read,write}_iter()
	random: check for signals after page of pool writes
	ALSA: ctxfi: Add SB046x PCI ID
	Linux 5.10.119

Signed-off-by: Greg Kroah-Hartman <gregkh@google.com>
Change-Id: I65f898474b7704881a3dd528012e7e91b09b3767
2022-07-14 14:31:17 +02:00

597 lines
20 KiB
Plaintext
Raw Permalink Blame History

# SPDX-License-Identifier: GPL-2.0-only
#
# Network device configuration
#
menuconfig NETDEVICES
default y if UML
depends on NET
bool "Network device support"
help
You can say N here if you don't intend to connect your Linux box to
any other computer at all.
You'll have to say Y if your computer contains a network card that
you want to use under Linux. If you are going to run SLIP or PPP over
telephone line or null modem cable you need say Y here. Connecting
two machines with parallel ports using PLIP needs this, as well as
AX.25/KISS for sending Internet traffic over amateur radio links.
See also "The Linux Network Administrator's Guide" by Olaf Kirch and
Terry Dawson. Available at <http://www.tldp.org/guides.html>.
If unsure, say Y.
# All the following symbols are dependent on NETDEVICES - do not repeat
# that for each of the symbols.
if NETDEVICES
config MII
tristate
config NET_CORE
default y
bool "Network core driver support"
help
You can say N here if you do not intend to use any of the
networking core drivers (i.e. VLAN, bridging, bonding, etc.)
if NET_CORE
config BONDING
tristate "Bonding driver support"
depends on INET
depends on IPV6 || IPV6=n
help
Say 'Y' or 'M' if you wish to be able to 'bond' multiple Ethernet
Channels together. This is called 'Etherchannel' by Cisco,
'Trunking' by Sun, 802.3ad by the IEEE, and 'Bonding' in Linux.
The driver supports multiple bonding modes to allow for both high
performance and high availability operation.
Refer to <file:Documentation/networking/bonding.rst> for more
information.
To compile this driver as a module, choose M here: the module
will be called bonding.
config DUMMY
tristate "Dummy net driver support"
help
This is essentially a bit-bucket device (i.e. traffic you send to
this device is consigned into oblivion) with a configurable IP
address. It is most commonly used in order to make your currently
inactive SLIP address seem like a real address for local programs.
If you use SLIP or PPP, you might want to say Y here. It won't
enlarge your kernel. What a deal. Read about it in the Network
Administrator's Guide, available from
<http://www.tldp.org/docs.html#guide>.
To compile this driver as a module, choose M here: the module
will be called dummy.
config WIREGUARD
tristate "WireGuard secure network tunnel"
depends on NET && INET
depends on IPV6 || !IPV6
select NET_UDP_TUNNEL
select DST_CACHE
select CRYPTO
select CRYPTO_LIB_CURVE25519
select CRYPTO_LIB_CHACHA20POLY1305
select CRYPTO_CHACHA20_X86_64 if X86 && 64BIT
select CRYPTO_POLY1305_X86_64 if X86 && 64BIT
select CRYPTO_BLAKE2S_X86 if X86 && 64BIT
select CRYPTO_CURVE25519_X86 if X86 && 64BIT
select ARM_CRYPTO if ARM
select ARM64_CRYPTO if ARM64
select CRYPTO_CHACHA20_NEON if ARM || (ARM64 && KERNEL_MODE_NEON)
select CRYPTO_POLY1305_NEON if ARM64 && KERNEL_MODE_NEON
select CRYPTO_POLY1305_ARM if ARM
select CRYPTO_BLAKE2S_ARM if ARM
select CRYPTO_CURVE25519_NEON if ARM && KERNEL_MODE_NEON
select CRYPTO_CHACHA_MIPS if CPU_MIPS32_R2
select CRYPTO_POLY1305_MIPS if MIPS
help
WireGuard is a secure, fast, and easy to use replacement for IPSec
that uses modern cryptography and clever networking tricks. It's
designed to be fairly general purpose and abstract enough to fit most
use cases, while at the same time remaining extremely simple to
configure. See www.wireguard.com for more info.
It's safe to say Y or M here, as the driver is very lightweight and
is only in use when an administrator chooses to add an interface.
config WIREGUARD_DEBUG
bool "Debugging checks and verbose messages"
depends on WIREGUARD
help
This will write log messages for handshake and other events
that occur for a WireGuard interface. It will also perform some
extra validation checks and unit tests at various points. This is
only useful for debugging.
Say N here unless you know what you're doing.
config EQUALIZER
tristate "EQL (serial line load balancing) support"
help
If you have two serial connections to some other computer (this
usually requires two modems and two telephone lines) and you use
SLIP (the protocol for sending Internet traffic over telephone
lines) or PPP (a better SLIP) on them, you can make them behave like
one double speed connection using this driver. Naturally, this has
to be supported at the other end as well, either with a similar EQL
Linux driver or with a Livingston Portmaster 2e.
Say Y if you want this and read
<file:Documentation/networking/eql.rst>. You may also want to read
section 6.2 of the NET-3-HOWTO, available from
<http://www.tldp.org/docs.html#howto>.
To compile this driver as a module, choose M here: the module
will be called eql. If unsure, say N.
config NET_FC
bool "Fibre Channel driver support"
depends on SCSI && PCI
help
Fibre Channel is a high speed serial protocol mainly used to connect
large storage devices to the computer; it is compatible with and
intended to replace SCSI.
If you intend to use Fibre Channel, you need to have a Fibre channel
adaptor card in your computer; say Y here and to the driver for your
adaptor below. You also should have said Y to "SCSI support" and
"SCSI generic support".
config IFB
tristate "Intermediate Functional Block support"
depends on NET_ACT_MIRRED || NFT_FWD_NETDEV
select NET_REDIRECT
help
This is an intermediate driver that allows sharing of
resources.
To compile this driver as a module, choose M here: the module
will be called ifb. If you want to use more than one ifb
device at a time, you need to compile this driver as a module.
Instead of 'ifb', the devices will then be called 'ifb0',
'ifb1' etc.
Look at the iproute2 documentation directory for usage etc
source "drivers/net/team/Kconfig"
config MACVLAN
tristate "MAC-VLAN support"
help
This allows one to create virtual interfaces that map packets to
or from specific MAC addresses to a particular interface.
Macvlan devices can be added using the "ip" command from the
iproute2 package starting with the iproute2-2.6.23 release:
"ip link add link <real dev> [ address MAC ] [ NAME ] type macvlan"
To compile this driver as a module, choose M here: the module
will be called macvlan.
config MACVTAP
tristate "MAC-VLAN based tap driver"
depends on MACVLAN
depends on INET
select TAP
help
This adds a specialized tap character device driver that is based
on the MAC-VLAN network interface, called macvtap. A macvtap device
can be added in the same way as a macvlan device, using 'type
macvtap', and then be accessed through the tap user space interface.
To compile this driver as a module, choose M here: the module
will be called macvtap.
config IPVLAN_L3S
depends on NETFILTER
depends on IPVLAN
def_bool y
select NET_L3_MASTER_DEV
config IPVLAN
tristate "IP-VLAN support"
depends on INET
depends on IPV6 || !IPV6
help
This allows one to create virtual devices off of a main interface
and packets will be delivered based on the dest L3 (IPv6/IPv4 addr)
on packets. All interfaces (including the main interface) share L2
making it transparent to the connected L2 switch.
Ipvlan devices can be added using the "ip" command from the
iproute2 package starting with the iproute2-3.19 release:
"ip link add link <main-dev> [ NAME ] type ipvlan"
To compile this driver as a module, choose M here: the module
will be called ipvlan.
config IPVTAP
tristate "IP-VLAN based tap driver"
depends on IPVLAN
depends on INET
select TAP
help
This adds a specialized tap character device driver that is based
on the IP-VLAN network interface, called ipvtap. An ipvtap device
can be added in the same way as a ipvlan device, using 'type
ipvtap', and then be accessed through the tap user space interface.
To compile this driver as a module, choose M here: the module
will be called ipvtap.
config VXLAN
tristate "Virtual eXtensible Local Area Network (VXLAN)"
depends on INET
select NET_UDP_TUNNEL
select GRO_CELLS
help
This allows one to create vxlan virtual interfaces that provide
Layer 2 Networks over Layer 3 Networks. VXLAN is often used
to tunnel virtual network infrastructure in virtualized environments.
For more information see:
http://tools.ietf.org/html/draft-mahalingam-dutt-dcops-vxlan-02
To compile this driver as a module, choose M here: the module
will be called vxlan.
config GENEVE
tristate "Generic Network Virtualization Encapsulation"
depends on INET
depends on IPV6 || !IPV6
select NET_UDP_TUNNEL
select GRO_CELLS
help
This allows one to create geneve virtual interfaces that provide
Layer 2 Networks over Layer 3 Networks. GENEVE is often used
to tunnel virtual network infrastructure in virtualized environments.
For more information see:
http://tools.ietf.org/html/draft-gross-geneve-02
To compile this driver as a module, choose M here: the module
will be called geneve.
config BAREUDP
tristate "Bare UDP Encapsulation"
depends on INET
depends on IPV6 || !IPV6
select NET_UDP_TUNNEL
select GRO_CELLS
help
This adds a bare UDP tunnel module for tunnelling different
kinds of traffic like MPLS, IP, etc. inside a UDP tunnel.
To compile this driver as a module, choose M here: the module
will be called bareudp.
config GTP
tristate "GPRS Tunneling Protocol datapath (GTP-U)"
depends on INET
select NET_UDP_TUNNEL
help
This allows one to create gtp virtual interfaces that provide
the GPRS Tunneling Protocol datapath (GTP-U). This tunneling protocol
is used to prevent subscribers from accessing mobile carrier core
network infrastructure. This driver requires a userspace software that
implements the signaling protocol (GTP-C) to update its PDP context
base, such as OpenGGSN <http://git.osmocom.org/openggsn/). This
tunneling protocol is implemented according to the GSM TS 09.60 and
3GPP TS 29.060 standards.
To compile this drivers as a module, choose M here: the module
wil be called gtp.
config MACSEC
tristate "IEEE 802.1AE MAC-level encryption (MACsec)"
select CRYPTO
select CRYPTO_AES
select CRYPTO_GCM
select GRO_CELLS
help
MACsec is an encryption standard for Ethernet.
config NETCONSOLE
tristate "Network console logging support"
help
If you want to log kernel messages over the network, enable this.
See <file:Documentation/networking/netconsole.rst> for details.
config NETCONSOLE_DYNAMIC
bool "Dynamic reconfiguration of logging targets"
depends on NETCONSOLE && SYSFS && CONFIGFS_FS && \
!(NETCONSOLE=y && CONFIGFS_FS=m)
help
This option enables the ability to dynamically reconfigure target
parameters (interface, IP addresses, port numbers, MAC addresses)
at runtime through a userspace interface exported using configfs.
See <file:Documentation/networking/netconsole.rst> for details.
config NETPOLL
def_bool NETCONSOLE
select SRCU
config NET_POLL_CONTROLLER
def_bool NETPOLL
config NTB_NETDEV
tristate "Virtual Ethernet over NTB Transport"
depends on NTB_TRANSPORT
config RIONET
tristate "RapidIO Ethernet over messaging driver support"
depends on RAPIDIO
config RIONET_TX_SIZE
int "Number of outbound queue entries"
depends on RIONET
default "128"
config RIONET_RX_SIZE
int "Number of inbound queue entries"
depends on RIONET
default "128"
config TUN
tristate "Universal TUN/TAP device driver support"
depends on INET
select CRC32
help
TUN/TAP provides packet reception and transmission for user space
programs. It can be viewed as a simple Point-to-Point or Ethernet
device, which instead of receiving packets from a physical media,
receives them from user space program and instead of sending packets
via physical media writes them to the user space program.
When a program opens /dev/net/tun, driver creates and registers
corresponding net device tunX or tapX. After a program closed above
devices, driver will automatically delete tunXX or tapXX device and
all routes corresponding to it.
Please read <file:Documentation/networking/tuntap.rst> for more
information.
To compile this driver as a module, choose M here: the module
will be called tun.
If you don't know what to use this for, you don't need it.
config TAP
tristate
help
This option is selected by any driver implementing tap user space
interface for a virtual interface to re-use core tap functionality.
config TUN_VNET_CROSS_LE
bool "Support for cross-endian vnet headers on little-endian kernels"
default n
help
This option allows TUN/TAP and MACVTAP device drivers in a
little-endian kernel to parse vnet headers that come from a
big-endian legacy virtio device.
Userspace programs can control the feature using the TUNSETVNETBE
and TUNGETVNETBE ioctls.
Unless you have a little-endian system hosting a big-endian virtual
machine with a legacy virtio NIC, you should say N.
config VETH
tristate "Virtual ethernet pair device"
help
This device is a local ethernet tunnel. Devices are created in pairs.
When one end receives the packet it appears on its pair and vice
versa.
config VIRTIO_NET
tristate "Virtio network driver"
depends on VIRTIO
select NET_FAILOVER
help
This is the virtual network driver for virtio. It can be used with
QEMU based VMMs (like KVM or Xen). Say Y or M.
config NLMON
tristate "Virtual netlink monitoring device"
help
This option enables a monitoring net device for netlink skbs. The
purpose of this is to analyze netlink messages with packet sockets.
Thus applications like tcpdump will be able to see local netlink
messages if they tap into the netlink device, record pcaps for further
diagnostics, etc. This is mostly intended for developers or support
to debug netlink issues. If unsure, say N.
config NET_VRF
tristate "Virtual Routing and Forwarding (Lite)"
depends on IP_MULTIPLE_TABLES
depends on NET_L3_MASTER_DEV
depends on IPV6 || IPV6=n
depends on IPV6_MULTIPLE_TABLES || IPV6=n
help
This option enables the support for mapping interfaces into VRF's. The
support enables VRF devices.
config VSOCKMON
tristate "Virtual vsock monitoring device"
depends on VHOST_VSOCK
help
This option enables a monitoring net device for vsock sockets. It is
mostly intended for developers or support to debug vsock issues. If
unsure, say N.
endif # NET_CORE
config SUNGEM_PHY
tristate
source "drivers/net/arcnet/Kconfig"
source "drivers/atm/Kconfig"
source "drivers/net/caif/Kconfig"
source "drivers/net/dsa/Kconfig"
source "drivers/net/ethernet/Kconfig"
source "drivers/net/fddi/Kconfig"
source "drivers/net/hippi/Kconfig"
source "drivers/net/ipa/Kconfig"
config NET_SB1000
tristate "General Instruments Surfboard 1000"
depends on PNP
help
This is a driver for the General Instrument (also known as
NextLevel) SURFboard 1000 internal
cable modem. This is an ISA card which is used by a number of cable
TV companies to provide cable modem access. It's a one-way
downstream-only cable modem, meaning that your upstream net link is
provided by your regular phone modem.
At present this driver only compiles as a module, so say M here if
you have this card. The module will be called sb1000. Then read
<file:Documentation/networking/device_drivers/cable/sb1000.rst> for
information on how to use this module, as it needs special ppp
scripts for establishing a connection. Further documentation
and the necessary scripts can be found at:
<http://www.jacksonville.net/~fventuri/>
<http://home.adelphia.net/~siglercm/sb1000.html>
<http://linuxpower.cx/~cable/>
If you don't have this card, of course say N.
source "drivers/net/phy/Kconfig"
source "drivers/net/mdio/Kconfig"
source "drivers/net/pcs/Kconfig"
source "drivers/net/plip/Kconfig"
source "drivers/net/ppp/Kconfig"
source "drivers/net/slip/Kconfig"
source "drivers/s390/net/Kconfig"
source "drivers/net/usb/Kconfig"
source "drivers/net/wireless/Kconfig"
source "drivers/net/wimax/Kconfig"
source "drivers/net/wan/Kconfig"
source "drivers/net/ieee802154/Kconfig"
config XEN_NETDEV_FRONTEND
tristate "Xen network device frontend driver"
depends on XEN
select XEN_XENBUS_FRONTEND
select PAGE_POOL
default y
help
This driver provides support for Xen paravirtual network
devices exported by a Xen network driver domain (often
domain 0).
The corresponding Linux backend driver is enabled by the
CONFIG_XEN_NETDEV_BACKEND option.
If you are compiling a kernel for use as Xen guest, you
should say Y here. To compile this driver as a module, chose
M here: the module will be called xen-netfront.
config XEN_NETDEV_BACKEND
tristate "Xen backend network device"
depends on XEN_BACKEND
help
This driver allows the kernel to act as a Xen network driver
domain which exports paravirtual network devices to other
Xen domains. These devices can be accessed by any operating
system that implements a compatible front end.
The corresponding Linux frontend driver is enabled by the
CONFIG_XEN_NETDEV_FRONTEND configuration option.
The backend driver presents a standard network device
endpoint for each paravirtual network device to the driver
domain network stack. These can then be bridged or routed
etc in order to provide full network connectivity.
If you are compiling a kernel to run in a Xen network driver
domain (often this is domain 0) you should say Y here. To
compile this driver as a module, chose M here: the module
will be called xen-netback.
config VMXNET3
tristate "VMware VMXNET3 ethernet driver"
depends on PCI && INET
depends on !(PAGE_SIZE_64KB || ARM64_64K_PAGES || \
IA64_PAGE_SIZE_64KB || MICROBLAZE_64K_PAGES || \
PARISC_PAGE_SIZE_64KB || PPC_64K_PAGES)
help
This driver supports VMware's vmxnet3 virtual ethernet NIC.
To compile this driver as a module, choose M here: the
module will be called vmxnet3.
config FUJITSU_ES
tristate "FUJITSU Extended Socket Network Device driver"
depends on ACPI
help
This driver provides support for Extended Socket network device
on Extended Partitioning of FUJITSU PRIMEQUEST 2000 E2 series.
config USB4_NET
tristate "Networking over USB4 and Thunderbolt cables"
depends on USB4 && INET
help
Select this if you want to create network between two computers
over a USB4 and Thunderbolt cables. The driver supports Apple
ThunderboltIP protocol and allows communication with any host
supporting the same protocol including Windows and macOS.
To compile this driver a module, choose M here. The module will be
called thunderbolt-net.
source "drivers/net/hyperv/Kconfig"
config NETDEVSIM
tristate "Simulated networking device"
depends on DEBUG_FS
depends on INET
depends on IPV6 || IPV6=n
select NET_DEVLINK
help
This driver is a developer testing tool and software model that can
be used to test various control path networking APIs, especially
HW-offload related.
To compile this driver as a module, choose M here: the module
will be called netdevsim.
config NET_FAILOVER
tristate "Failover driver"
select FAILOVER
help
This provides an automated failover mechanism via APIs to create
and destroy a failover master netdev and manages a primary and
standby slave netdevs that get registered via the generic failover
infrastructure. This can be used by paravirtual drivers to enable
an alternate low latency datapath. It also enables live migration of
a VM with direct attached VF by failing over to the paravirtual
datapath when the VF is unplugged.
endif # NETDEVICES
Reference in New Issue View Git Blame Copy Permalink