[ Upstream commit 9ad9bc59dde106e56dd59ce2bec7c1b08e1f0eb4 ]
Add flag "SOF_RT711_JD_SRC_JD2", flag "SOF_RT715_DAI_ID_FIX"
and "SOF_SDW_FOUR_SPK" to the Dell TGL-H based SKU "0A5E".
Signed-off-by: Libin Yang <libin.yang@intel.com>
Co-developed-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125081117.814488-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e953daeb68b1abd8a7d44902786349fdeef5c297 ]
Reset (aka power off) happens when the reset gpio is made active.
Change function name to ak4458_reset to match devicetree property "reset-gpios"
Signed-off-by: Eliot Blennerhassett <eliot@blennerhassett.gen.nz>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/ce650f47-4ff6-e486-7846-cc3d033f3601@blennerhassett.gen.nz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5b5ff607d6fe5f4284acabd07066f96ecf96ac4 ]
Adding PCI id for TGL-H. Like for other TGL platforms, SOF is used if
Soundwire codecs or PCH-DMIC is detected.
Signed-off-by: Bard Liao <bard.liao@intel.com>
Reviewed-by: Xiuli Pan <xiuli.pan@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210125083051.828205-1-kai.vehmanen@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a8939f2e138e418c2b059056ff5b501eaf2eae54 ]
When switching between firmware types, the wrong control
can be selected when requesting control in kernel API.
Use the currently selected DSP firwmare type to select
the proper mixer control.
Signed-off-by: James Schulman <james.schulman@cirrus.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20210115201105.14075-1-james.schulman@cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcd7059abc19e6ec5b2260dff6a008fb99c4eef9 ]
Instead of queueing jackpoll_work, runtime resume the codec to let it
use different jack detection methods based on jackpoll_interval.
This partially matches SOF driver's behavior with commit a6e7d0a4bd
("ALSA: hda: fix jack detection with Realtek codecs when in D3"), the
difference is SOF unconditionally resumes the codec.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-1-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 543466ef3571069b8eb13a8ff7c7cfc8d8a75c43 upstream.
The allocation uses sizeof(u32) when it should use sizeof(unsigned long)
so it leads to memory corruption later in the function when the data is
initialized.
Fixes: 5aebe7c7f9 ("ASoC: topology: fix endianness issues")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/YAf+8QZoOv+ct526@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fc4cb1e15f0c66f2e37314349dc4a82bd946fbb1 upstream.
DAIs need to be removed when topology unload function is called (usually
done when component is being removed). We can't do this when device is
being removed, as structures we operate on when removing DAI can already
be freed.
Fixes: 6ae4902f2f ("ASoC: soc-topology: use devm_snd_soc_register_dai()")
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Tested-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210120152846.1703655-2-amadeuszx.slawinski@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5ac154443e686b06242aa49de30a12b74ea9ca98 upstream.
hdmi-codec is an optional property. Ignore to bind TDM DAI link
if the property isn't specified.
Fixes: f2024dc55f ("ASoC: mediatek: mt8183: use hdmi-codec")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210120092237.1553938-2-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4d36ed8eb0f749c9e781e0d3b041a7adeedcdaa9 upstream.
hdmi-codec is an optional property. Ignore to bind TDM DAI link
if the property isn't specified.
Fixes: 5bdbe97711 ("ASoC: mediatek: mt8183-da7219: use hdmi-codec")
Signed-off-by: Tzung-Bi Shih <tzungbi@google.com>
Link: https://lore.kernel.org/r/20210120092237.1553938-3-tzungbi@google.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 70041000450d0a071bf9931d634c8e2820340236 ]
The "dai_id" given into LPAIF_INTFDMA_REG(...) is already the real
DAI ID, not an index into v->dai_driver. Looking it up again seems
entirely redundant.
For IPQ806x (and SC7180 since commit 09a4f6f5d21c
("ASoC: dt-bindings: lpass: Fix and common up lpass dai ids") this is
now often an out-of-bounds read because the indexes in the "dai_driver"
array no longer match the actual DAI ID.
Cc: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Reviewed-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210125104442.135899-1-stephan@gerhold.net
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd9038faa9d7f162b47e1577e35ec5eac39f9d90 ]
The LKP bot reports the following issue:
WARNING: unmet direct dependencies detected for SOUNDWIRE_INTEL
Depends on [m]: SOUNDWIRE [=m] && ACPI [=y] && SND_SOC [=y]
Selected by [y]:
- SND_SOC_SOF_INTEL_SOUNDWIRE [=y] && SOUND [=y] && !UML &&
SND [=y] && SND_SOC [=y] && SND_SOC_SOF_TOPLEVEL [=y] &&
SND_SOC_SOF_INTEL_TOPLEVEL [=y] && SND_SOC_SOF_INTEL_PCI [=y]
This comes from having tristates being configured independently, when
in practice the CONFIG_SOUNDWIRE needs to be aligned with the SOF
choices: when the SOF code is compiled as built-in, the
CONFIG_SOUNDWIRE also needs to be 'y'.
The easiest fix is to replace the 'depends' with a 'select' and have a
single user selection to activate SoundWire on Intel platforms. This
still allows regmap to be compiled independently as a module.
This is just a temporary fix, the select/depend usage will be
revisited and the SOF Kconfig re-organized, as suggested by Arnd
Bergman.
Reported-by: kernel test robot <lkp@intel.com>
Fixes: a115ab9b8b ('ASoC: SOF: Intel: add build support for SoundWire')
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210122005725.94163-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1e066a23e76f90c9c39c189fe0dbf7c6e3dd5044 ]
BIT_WIDTH field in I2S_CTL register is two bits wide, however
recent regmap field conversion patch trimmed it down to one bit.
Fix this by correcting the bit range!
Fixes: b5022a36d2 ("ASoC: qcom: lpass: Use regmap_field for i2sctl and dmactl registers")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210119174700.32639-1-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd3484f7f1386071b1af159023917ed12c182d39 ]
lpass hdmi support patch totally removed support for MI2S TERTIARY
and QUATERNARY.
One of the major issue was spotted with the design of having
separate SoC specific header files for the common lpass driver.
This design is prone to break as an when new SoC header is added
as the common DAI ids of other SoCs will be overwritten by the
new ones.
Having a common header qcom,lpass.h should fix the issue and any new
DAI ids should be added to the common header.
With this change lpass also needs a new of_xlate function to resolve
dai name.
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Reported-by: Jun Nie <jun.nie@linaro.org>
Reported-by: Stephan Gerhold <stephan@gerhold.net>
Tested-by: Srinivasa Rao <srivasam@codeaurora.org>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20210119171527.32145-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 315fbe4cef98ee5fb6085bc54c7f25eb06466c70 ]
MI2S and DMA control registers are not volatile, so remove these from volatile registers list.
Registers reset state check by reading non volatile registers makes no use,
so remove error check from cpu and platform trigger callbacks.
Initialized map variable two times in lpass platform trigger API,
so remove redundant initialization.
Fixes commit b182496822 ("ASoC: qcom: Fix enabling BCLK and LRCLK in LPAIF invalid state")
Signed-off-by: V Sujith Kumar Reddy <vsujithk@codeaurora.org>
Signed-off-by: Srinivasa Rao Mandadapu <srivasam@codeaurora.org>
Link: https://lore.kernel.org/r/1608192514-29695-2-git-send-email-srivasam@codeaurora.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 40caffd66ca9ad1baa2d5541232675160bc6c772 upstream.
Apparently, the DMI board name LNVNB161216 is also used also
for products with the digital microphones connected to the AMD's
audio bridge. Refine the DMI table - use product name identifiers
extracted from https://bugzilla.redhat.com/show_bug.cgi?id=1892115 .
The report for Lenovo Yoga Slim 7 14ARE05 (82A2) is in buglink.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211299
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Cc: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210120144211.817937-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4961167bf7482944ca09a6f71263b9e47f949851 upstream.
We've got another report indicating a similar problem wrt the
power-saving behavior with VIA codec on Clevo machines. Let's apply
the existing workaround generically to all Clevo devices with VIA
codecs to cover all in once.
BugLink: https://bugzilla.opensuse.org/show_bug.cgi?id=1181330
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210126165603.11683-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef4d764c99f792b725d4754a3628830f094f5c58 upstream.
System takes a very long time to suspend after commit 215a22ed31
("ALSA: hda: Refactor codec PM to use direct-complete optimization"):
[ 90.065964] PM: suspend entry (s2idle)
[ 90.067337] Filesystems sync: 0.001 seconds
[ 90.185758] Freezing user space processes ... (elapsed 0.002 seconds) done.
[ 90.188713] OOM killer disabled.
[ 90.188714] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
[ 90.190024] printk: Suspending console(s) (use no_console_suspend to debug)
[ 90.904912] intel_pch_thermal 0000:00:12.0: CPU-PCH is cool [49C], continue to suspend
[ 321.262505] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[ 328.426919] snd_hda_codec_realtek ehdaudio0D0: Unable to sync register 0x2b8000. -5
[ 329.490933] ACPI: EC: interrupt blocked
That commit keeps the codec suspended during the system suspend. However,
mute/micmute LED will clear codec's direct-complete flag by
dpm_clear_superiors_direct_complete().
This doesn't play well with SOF driver. When its runtime resume is
called for system suspend, hda_codec_jack_check() schedules
jackpoll_work which uses snd_hdac_is_power_on() to check whether codec
is suspended. Because the direct-complete path isn't taken,
pm_runtime_disable() isn't called so snd_hdac_is_power_on() returns
false and jackpoll continues to run, and snd_hda_power_up_pm() cannot
power up an already suspended codec in multiple attempts, causes the
long delay on system suspend:
if (dev->power.direct_complete) {
if (pm_runtime_status_suspended(dev)) {
pm_runtime_disable(dev);
if (pm_runtime_status_suspended(dev)) {
pm_dev_dbg(dev, state, "direct-complete ");
goto Complete;
}
pm_runtime_enable(dev);
}
dev->power.direct_complete = false;
}
When direct-complete path is taken, snd_hdac_is_power_on() returns true
and hda_jackpoll_work() is skipped by accident. So this is still not
correct.
If we were to use snd_hdac_is_power_on() in system PM path,
pm_runtime_status_suspended() should be used instead of
pm_runtime_suspended(), otherwise pm_runtime_{enable,disable}() may
change the outcome of snd_hdac_is_power_on().
Because devices suspend in reverse order (i.e. child first), it doesn't
make much sense to resume an already suspended codec from audio
controller. So avoid the issue by making sure jackpoll isn't used in
system PM process.
Fixes: 215a22ed31 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210112181128.1229827-3-kai.heng.feng@canonical.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9c25af250214e45f6d1c21ff6239a1ffeeedf20e upstream.
The earlier commit to fix runtime PM in case i915 init fails,
introduces a possibility to hit a page fault.
snd_hdac_ext_bus_device_exit() is designed to be called from
dev.release(). Calling it outside device reference counting, is
not safe and may lead to calling the device_exit() function
twice. Additionally, as part of ext_bus_device_init(), the device
is also registered with snd_hdac_device_register(). Thus before
calling device_exit(), the device must be removed from device
hierarchy first.
Fix the issue by rolling back init actions by calling
hdac_device_unregister() and then releasing device with put_device().
This matches with existing code in hdac-ext module.
To complete the fix, add handling for the case where
hda_codec_load_module() returns -ENODEV, and clean up the hdac_ext
resources also in this case.
In future work, hdac-ext interface should be extended to allow clients
more flexibility to handle the life-cycle of individual devices, beyond
just the current snd_hdac_ext_bus_device_remove(), which removes all
devices.
BugLink: https://github.com/thesofproject/linux/issues/2646
Reported-by: Jaroslav Kysela <perex@perex.cz>
Fixes: 6c63c954e1 ("ASoC: SOF: fix a runtime pm issue in SOF when HDMI codec doesn't work")
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Reviewed-by: Bard Liao <bard.liao@intel.com>
Link: https://lore.kernel.org/r/20210113150715.3992635-1-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2b73649cee65b8e33c75c66348cb1bfe0ff9d766 ]
After hibernation, HDA controller can't be runtime-suspended after
commit 215a22ed31 ("ALSA: hda: Refactor codjc PM to use
direct-complete optimization"), which enables direct-complete for HDA
codec.
The HDA codec driver didn't expect direct-complete will be disabled
after it returns a positive value from prepare() callback. However,
there are some places that PM core can disable direct-complete. For
instance, system hibernation or when codec has subordinates like LEDs.
So if the codec is prepared for direct-complete but PM core still calls
codec's suspend or freeze callback, partially revert the commit and take
the original approach, which uses pm_runtime_force_*() helpers to
ensure PM refcount are balanced. Meanwhile, still keep prepare() and
complete() callbacks to enable direct-complete and request a resume for
jack detection, respectively.
Reported-by: Kenneth R. Crudup <kenny@panix.com>
Fixes: 215a22ed31 ("ALSA: hda: Refactor codec PM to use direct-complete optimization")
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Link: https://lore.kernel.org/r/20210119152145.346558-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 615d435400435876ac68c1de37e9526a9164eaec ]
Currently hda on tegra30 fails to open a stream with an input/output error.
For example:
speaker-test -Dhw:0,3 -c 2
speaker-test 1.2.2
Playback device is hw:0,3
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 64 to 16384
Period size range from 32 to 8192
Using max buffer size 16384
Periods = 4
was set period_size = 4096
was set buffer_size = 16384
0 - Front Left
Write error: -5,Input/output error
xrun_recovery failed: -5,Input/output error
Transfer failed: Input/output error
The tegra-hda device was introduced in tegra30 but only utilized in
tegra124 until recent chips. Tegra210/186 work only due to a hardware
change. For this reason it is unknown when this issue first manifested.
Discussions with the hardware team show this applies to all current tegra
chips. It has been resolved in the tegra234, which does not have hda
support at this time.
The explanation from the hardware team is this:
Below is the striping formula referenced from HD audio spec.
{ ((num_channels * bits_per_sample) / number of SDOs) >= 8 }
The current issue is seen because Tegra HW has a problem with boundary
condition (= 8) for striping. The reason why it is not seen on
Tegra210/Tegra186 is because it uses max 2SDO lines. Max SDO lines is
read from GCAP register.
For the given stream (channels = 2, bps = 16);
ratio = (channels * bps) / NSDO = 32 / NSDO;
On Tegra30, ratio = 32/4 = 8 (FAIL)
On Tegra210/186, ratio = 32/2 = 16 (PASS)
On Tegra194, ratio = 32/4 = 8 (FAIL) ==> Earlier workaround was
applied for it
If Tegra210/186 is forced to use 4SDO, it fails there as well. So the
behavior is consistent across all these chips.
Applying the fix in [1] universally resolves this issue on tegra30-hda.
Tested on the Ouya game console and the tf201 tablet.
[1] commit 60019d8c65 ("ALSA: hda/tegra: workaround playback failure on
Tegra194")
Reviewed-by: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Ion Agorria <ion@agorria.com>
Reviewed-by: Sameer Pujar <spujar@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Link: https://lore.kernel.org/r/20210108135913.2421585-3-pgwipeout@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6108f990c0887d3e8f1db2d13c7012e40a061f28 ]
To avoid calibration time-out, this patch adds the mutex between calibration and power state changes
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20201217085651.24580-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bb224c3e3e41d940612d4cc9573289cdbd5cb8f5 ]
haswell machine board is missing pm_ops what prevents it from undergoing
suspend-resume procedure successfully. Assign default snd_soc_pm_ops so
this is no longer the case.
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20201217105401.27865-1-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 67ea698c3950d10925be33c21ca49ffb64e21842 upstream.
It turned out that VIA codecs also mute the sound in the lowest mixer
level. Turn on the dac_min_mute flag to indicate the mute-as-minimum
in TLV like already done in Conexant and IDT codecs.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=210559
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210114072453.11379-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 495dc7637cb5ca8e39c46db818328410bb6e73a1 upstream.
The Acer Apire E5-575T laptop with codec ALC255 has a terrible
background noise comes from internal mic capture. And the jack
sensing dose not work for headset like some other Acer laptops.
This patch limits the internal mic boost on top of the existing
ALC255_FIXUP_ACER_MIC_NO_PRESENCE quirk for Acer Aspire E5-575T.
Signed-off-by: Chris Chiu <chiu@endlessos.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210114082728.74729-1-chiu@endlessos.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 217bfbb8b0bfa24619b11ab75c135fec99b99b20 upstream.
snd_seq_oss_synth_make_info() didn't check the error code from
snd_seq_oss_midi_make_info(), and this leads to the call of strlcpy()
with the uninitialized string as the source, which may lead to the
access over the limit.
Add the proper error check for avoiding the failure.
Reported-by: syzbot+e42504ff21cff05a595f@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210115093428.15882-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9f65df9c589f249435255da37a5dd11f1bc86f4d upstream.
As snd_fw_async_midi_port.consume_bytes is unsigned int, and
NSEC_PER_SEC is 1000000000L, the second multiplication in
port->consume_bytes * 8 * NSEC_PER_SEC / 31250
always overflows on 32-bit platforms, truncating the result. Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.
Note that this assumes port->consume_bytes <= 16777.
Fixes: 531f471834 ("ALSA: firewire-lib/firewire-tascam: localize async midi port")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-3-geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e7c22eeaff8565d9a8374f320238c251ca31480b upstream.
As snd_ff.rx_bytes[] is unsigned int, and NSEC_PER_SEC is 1000000000L,
the second multiplication in
ff->rx_bytes[port] * 8 * NSEC_PER_SEC / 31250
always overflows on 32-bit platforms, truncating the result. Fix this
by precalculating "NSEC_PER_SEC / 31250", which is an integer constant.
Note that this assumes ff->rx_bytes[port] <= 16777.
Fixes: 1917429578 ("ALSA: fireface: add transaction support")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://lore.kernel.org/r/20210111130251.361335-2-geert+renesas@glider.be
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f373a811fd9a69fc8bafb9bcb41d2cfa36c62665 upstream.
Return -ETIMEDOUT if the dsp boot times out instead of returning
success.
Fixes: cb6a552846 ("ASoC: Intel: cnl: Add sst library functions for cnl platform")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/X9NEvCzuN+IObnTN@mwanda
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a84dfb3d55934253de6aed38ad75990278a2d21e upstream.
The signal captured on from tdm decoder of the AXG SoC is incorrect. It
appears amplified. The skew offset of the decoder is wrong.
Setting the skew offset to 3, like the g12 and sm1 SoCs, solves and gives
correct data.
Fixes: 13a22e6a98 ("ASoC: meson: add tdm input driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201217150834.3247526-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 671ee4db952449acde126965bf76817a3159040d upstream.
When the axg-tdm-interface was introduced, the backend DAI was marked as an
endpoint when DPCM was walking the DAPM graph to find a its BE.
It is no longer the case since this
commit 8dd26dff00 ("ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks")
Because of this, when DPCM finds a BE it does everything it needs on the
DAIs but it won't power up the widgets between the FE and the BE if there
is no actual endpoint after the BE.
On meson-axg HWs, the loopback is a special DAI of the tdm-interface BE.
It is only linked to the dummy codec since there no actual HW after it.
>From the DAPM perspective, the DAI has no endpoint. Because of this, the TDM
decoder, which is a widget between the FE and BE is not powered up.
>From the user perspective, everything seems fine but no data is produced.
Connecting the Loopback DAI to a dummy DAPM endpoint solves the problem.
Fixes: 8dd26dff00 ("ASoC: dapm: Fix handling of custom_stop_condition on DAPM graph walks")
Cc: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20201217150812.3247405-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c6679b5cb120f07652418524ab186ac47680b49 upstream.
A widget's "dirty" list_head, much like its "list" list_head, eventually
chains back to a list_head on the snd_soc_card itself. This means that
the list can stick around even after the widget (or all widgets) have
been freed. Currently, however, widgets that are in the dirty list when
freed remain there, corrupting the entire list and leading to memory
errors and undefined behavior when the list is next accessed or
modified.
I encountered this issue when a component failed to probe relatively
late in snd_soc_bind_card(), causing it to bail out and call
soc_cleanup_card_resources(), which eventually called
snd_soc_dapm_free() with widgets that were still dirty from when they'd
been added.
Fixes: db432b414e ("ASoC: Do DAPM power checks only for widgets changed since last run")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Hebb <tommyhebb@gmail.com>
Reviewed-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/f8b5f031d50122bf1a9bfc9cae046badf4a7a31a.1607822410.git.tommyhebb@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1f092d1c8819679d78a7d9c62a46d4939d217a9d upstream.
The ThinkPad X395 latop does not have the internal digital
microphone connected to the AMD's ACP bridge, but it's advertised
via BIOS. The internal microphone is connected to the HDA codec.
Use DMI to block the microphone PCM device for this platform.
BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1892115
Cc: <stable@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Link: https://lore.kernel.org/r/20201227164109.269973-1-perex@perex.cz
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 91bc156817a3c2007332b64b4f85c32aafbbbea6 upstream.
* The HP ZBook Fury 15/17 G7 Mobile Workstation are using ALC285 codec
which is using 0x04 to control mute LED and 0x01 to control micmute LED.
* The right channel speaker is no sound and it needs to expose GPIO1 for
initialing AMP.
Add quirks to support them.
Signed-off-by: Jeremy Szu <jeremy.szu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210106130549.100532-1-jeremy.szu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a598098cc9737f612dbab52294433fc26c51cc9b upstream.
HP EliteBook 850 G7 uses the same GPIO pins as ALC285_FIXUP_HP_GPIO_LED
to enable mute and micmute LED. So apply the quirk to enable the LEDs.
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201230125636.45028-1-kai.heng.feng@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 484229585a5e91eeb00ee10e05d5204e1ca6c481 upstream.
HP Pavilion 13-bb0000 (SSID 103c:87c8) needs the same
quirk as other models with ALC287.
Signed-off-by: Manuel Jiménez <mjbfm99@me.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/X+s/gKNydVrI6nLj@HP-Pavilion-13
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f86de9b1c0663b0a3ca2dcddec9aa910ff0fbf2c upstream.
Cannot adjust speaker's volume on Lenovo C940.
Applying the alc298_fixup_speaker_volume function can fix the issue.
[ Additional note: C940 has I2S amp for the speaker and this needs the
same initialization as Dell machines.
The patch was slightly modified so that the quirk entry is moved
next to the corresponding Dell quirk entry. -- tiwai ]
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/ea25b4e5c468491aa2e9d6cb1f2fced3@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 744a11abc56405c5a106e63da30a941b6d27f737 upstream.
The current kernel does not support the cx11970 codec chip.
Add a codec configuration item to kernel.
[ Minor coding style fix by tiwai ]
Signed-off-by: bo liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201229035226.62120-1-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4bfd6247fa9164c8e193a55ef9c0ea3ee22f82d8 upstream.
Clevo W35xSS_370SS with VIA codec has had the runtime PM problem that
looses the power state of some nodes after the runtime resume. This
was worked around by disabling the default runtime PM via a denylist
entry. Since 5.10.x made the runtime PM applied (casually) even
though it's disabled in the denylist, this problem was revisited. The
result was that disabling power_save_node feature suffices for the
runtime PM problem.
This patch implements the disablement of power_save_node feature in
VIA codec for the device. It also drops the former denylist entry,
too, as the runtime PM should work in the codec side properly now.
Fixes: b529ef2464 ("ALSA: hda: Add Clevo W35xSS_370SS to the power_save blacklist")
Reported-by: Christian Labisch <clnetbox@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20210104153046.19993-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c06ccf3ebb7503706ea49fd248e709287ef385a3 upstream.
The calculation of in_cables and out_cables bitmaps are done with the
bit shift by the value from the descriptor, which is an arbitrary
value, and can lead to UBSAN shift-out-of-bounds warnings.
Fix it by filtering the bad descriptor values with the check of the
upper bound 0x10 (the cable bitmaps are 16 bits).
Reported-by: syzbot+92e45ae45543f89e8c88@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20201223174557.10249-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d5c5fdcee0f9a94deb0472e594706018b00aa31 upstream.
The silent_stream_disable() function introduced by the commit
b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to
DP") takes the per_pin->lock mutex, but it unlocks the wrong one,
spec->pcm_lock, which causes a deadlock. This patch corrects it.
Fixes: b1a5039759cb ("ALSA: hda/hdmi: fix silent stream for first playback to DP")
Reported-by: Jan Alexander Steffens (heftig) <heftig@archlinux.org>
Cc: <stable@vger.kernel.org>
Acked-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20210101083852.12094-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 618de0f4ef11acd8cf26902e65493d46cc20cc89 ]
The PCM hw_params core function tries to clear up the PCM buffer
before actually using for avoiding the information leak from the
previous usages or the usage before a new allocation. It performs the
memset() with runtime->dma_bytes, but this might still leave some
remaining bytes untouched; namely, the PCM buffer size is aligned in
page size for mmap, hence runtime->dma_bytes doesn't necessarily cover
all PCM buffer pages, and the remaining bytes are exposed via mmap.
This patch changes the memory clearance to cover the all buffer pages
if the stream is supposed to be mmap-ready (that guarantees that the
buffer size is aligned in page size).
Reviewed-by: Lars-Peter Clausen <lars@metafoo.de>
Link: https://lore.kernel.org/r/20201218145625.2045-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ebd47037027c4beae99680bff3b20fdee5d7c1e upstream.
The snd_seq_queue struct contains various flags in the bit fields.
Those are categorized to two different use cases, both of which are
protected by different spinlocks. That implies that there are still
potential risks of the bad operations for bit fields by concurrent
accesses.
For addressing the problem, this patch rearranges those flags to be
a standard bool instead of a bit field.
Reported-by: syzbot+63cbe31877bb80ef58f5@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20201206083456.21110-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
