Remove including <linux/version.h> that don't need it.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Acked-by: Shannon Nelson <snelson@pensando.io>
Signed-off-by: David S. Miller <davem@davemloft.net>
We may have some SoCs that can't achieve XGMAC max speed. Limit it if
asked to.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a test to validate that Split Header feature is working correctly.
It works by using the rececently introduced counter that increments each
time a packet with split header is received.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We are already doing it by default in the TX path so we can also enable
Jumbo Frame support in the RX path independently of MTU value.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We need to set the RX tail pointer so that RX engine starts working
again after finishing the Flow Control test.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add checks for support of Source Address Insertion/Replacement before
running the test.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
VF NIC may go down then come up during host servicing events. This
causes the VF NIC offloading feature settings to roll back to the
defaults. This patch can synchronize features from synthetic NIC to
the VF NIC during ndo_set_features (ethtool -K),
and netvsc_register_vf when VF comes back after host events.
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Cc: Mark Bloch <markb@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a previous patch, the NETIF_F_SG was missing after the code changes.
That caused the SG feature to be "fixed". This patch includes it into
hw_features, so it is tunable again.
Fixes: 23312a3be999 ("netvsc: negotiate checksum and segmentation parameters")
Signed-off-by: Haiyang Zhang <haiyangz@microsoft.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
1) Allover mlx5 cleanups
2) Added port congestion counters to ethtool stats:
Add 3 counters per priority to ethtool using PPCNT:
2.1) rx_prio[p]_buf_discard - the number of packets discarded by device
due to lack of per host receive buffers
2.2) rx_prio[p]_cong_discard - the number of packets discarded by device
due to per host congestion
2.3) rx_prio[p]_marked - the number of packets ECN marked by device due
to per host congestion
-----BEGIN PGP SIGNATURE-----
iQEzBAABCAAdFiEEGhZs6bAKwk/OTgTpSD+KveBX+j4FAl1xgcsACgkQSD+KveBX
+j7XSwf6A6Ri61kZ4fLRfrKcMn7rq7uzUn855UjtNQUpDlmoKSu9lY+SGtMQMENq
7AMvUmgZJe2Sw47o3N9mxqPa86HS9uGDFhnF7HOKxa/4uzoqqvvdget4BhP0h1xS
tRDXScnuZfPIs1nuA0w1obgzYb0FwOJhtB1m3rQ6iywAohwmM8mYe9jPREfIGaoy
U9p+DZEJHIC2YKy4G7hymbNbaKMgMG9IYl9axNyqbGaA9xPTPO4+pBBFvEXffLh6
UAk7p3XHV0ZIiKq1STIqDJpz6ucP88ywg9Hnkkrz2U82xuk/E43tBvIM9pxgl/bh
UhJcoL2Wlr5aHNHgIlBgWZ07Q+J0aQ==
=iM0A
-----END PGP SIGNATURE-----
Merge tag 'mlx5-updates-2019-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2019-09-05
1) Allover mlx5 cleanups
2) Added port congestion counters to ethtool stats:
Add 3 counters per priority to ethtool using PPCNT:
2.1) rx_prio[p]_buf_discard - the number of packets discarded by device
due to lack of per host receive buffers
2.2) rx_prio[p]_cong_discard - the number of packets discarded by device
due to per host congestion
2.3) rx_prio[p]_marked - the number of packets ECN marked by device due
to per host congestion
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Commit 36f1031c51a2 ("ibmvnic: Do not process reset during or after
device removal") made the change to exit reset if the driver has been
removed, but does not free reset work items of the adapter from queue.
Ensure all reset work items are freed when breaking out of the loop early.
Fixes: 36f1031c51a2 ("ibmnvic: Do not process reset during or after device removal”)
Signed-off-by: Juliet Kim <julietk@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Regarding to IEEE 802.3-2015 standard section 2
28B.3 Priority resolution - Table 28-3 - Pause resolution
In case of Local device Pause=1 AsymDir=0, Link partner
Pause=1 AsymDir=1, Local device resolution should be enable PAUSE
transmit, disable PAUSE receive.
And in case of Local device Pause=1 AsymDir=1, Link partner
Pause=1 AsymDir=0, Local device resolution should be enable PAUSE
receive, disable PAUSE transmit.
Fixes: 9525ae83959b ("phylink: add phylink infrastructure")
Signed-off-by: Stefan Chulski <stefanc@marvell.com>
Reported-by: Shaul Ben-Mayor <shaulb@marvell.com>
Acked-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>
The kernel.h macro DIV_ROUND_CLOSEST performs the computation (x + d/2)/d
but is perhaps more readable.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We 'allocate' 'count' bytes here. In fact, 'dev_alloc_skb' already add some
extra space for padding, so a bit more is allocated.
However, we use 1 byte for the KISS command, then copy 'count' bytes, so
count+1 bytes.
Explicitly allocate and use 1 more byte to be safe.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jeff Kirsher says:
====================
100GbE Intel Wired LAN Driver Updates 2019-09-05
This series contains updates to ice driver.
Brett fixes the setting of num_q_vectors by using the maximum number
between the allocated transmit and receive queues.
Anirudh simplifies the code to use a helper function to return the main
VSI, which is the first element in the pf->vsi array. Adds a pointer
check to prevent a NULL pointer dereference. Adds a check to ensure we
do not initialize DCB on devices that are not DCB capable. Does some
housekeeping on the code to remove unnecessary indirection and reduce
the PF structure by removing elements that are not needed since the
values they were storing can be readily gotten from
ice_get_avail_*_count()'s. Updates the printed strings to make it
easier to search the logs for driver capabilities.
Jesse cleans up unnecessary function arguments. Updated the code to use
prefetch() to add some efficiency to the driver to avoid a cache miss.
Did some housekeeping on the code to remove the configurable transmit
work limit via ethtool which ended up creating performance overhead.
Made additional performance enhancements by updating the driver to start
out with a reasonable number of descriptors by changing the default to
2048.
Mitch fixes the reset logic for VFs by clearing VF_MBX_ARQLEN register
when the source of the reset is not PFR.
Lukasz updates the driver to include a similar fix for the i40e driver
by reporting link down for VF's when the PF queues are not enabled.
Akeem updates the driver to report the VF link status once we get VF
resources so that we can reflect the link status similarly to how the PF
reports link speed.
Ashish updates the transmit context structure based on recent changes to
the hardware specification.
Dave updates the DCB logic to allow a delayed registration for MIB
change events so that the driver is not accepting events before it is
ready for them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Second set of patches for 5.4. Lots of changes for iwlwifi and mt76,
but also smaller changes to other drivers.
Major changes:
iwlwifi
* remove broken and unused runtime power management mode for PCIe
devices, removes IWLWIFI_PCIE_RTPM Kconfig option as well
* support new ACPI value for per-platform antenna gain
* support for single antenna diversity
* support for new WoWLAN FW API
brcmfmac
* add reset debugfs file for testing firmware restart
mt76
* DFS pattern detector for mt7615 (DFS channels not enabled yet)
* Channel Switch Announcement (CSA) support for mt7615
* new device support for mt76x0
* support for more ciphers in mt7615
* smart carrier sense on mt7615
* survey support on mt7615
* multiple interfaces on mt76x02u
rtw88
* enable MSI interrupt
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdc1+yAAoJEG4XJFUm622bd/UH+wUmM+7VaS+QZGQg3myyKGS6
eXVR1n/sT1L+0gnOUopooHGOjGAYPQZgMlC4r4oSd1PrmfJ+0yqhfjODNZyOSRU3
amYnBCesrvMohU9rd8iApxE83L+fr1P59gNfX/LsRxqdU9WmaAjX8nVUirc/w7iX
fGw7B4HqMchp+g73Svdy1Qk0d35laI6JexqeldPS8K0Qf4jwiwxM3kPL17W2Mznn
Osmcg+GHhy62Ov5yz71m0wAyxzcY4jMBtQuISn1vsKyZi17ndKgG2dPFXen29gDg
cRQshHx3UjIaR8XPJg7jmiomLrCNytFod+7IEO2Tz+iacFa6IRcKFOxzjtWTvzQ=
=lHhS
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-next-for-davem-2019-09-07' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers-next
Kalle Valo says:
====================
wireless-drivers-next patches for 5.4
Second set of patches for 5.4. Lots of changes for iwlwifi and mt76,
but also smaller changes to other drivers.
Major changes:
iwlwifi
* remove broken and unused runtime power management mode for PCIe
devices, removes IWLWIFI_PCIE_RTPM Kconfig option as well
* support new ACPI value for per-platform antenna gain
* support for single antenna diversity
* support for new WoWLAN FW API
brcmfmac
* add reset debugfs file for testing firmware restart
mt76
* DFS pattern detector for mt7615 (DFS channels not enabled yet)
* Channel Switch Announcement (CSA) support for mt7615
* new device support for mt76x0
* support for more ciphers in mt7615
* smart carrier sense on mt7615
* survey support on mt7615
* multiple interfaces on mt76x02u
rtw88
* enable MSI interrupt
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
* Remove (broken) d0i3 support;
* Debug infrastructure work continues;
* Bump support FW API version to 50;
* Fix for the SN value in certain suspend/resume situations;
* Some work on new FW scan APIs;
* Work on LTR FW APIs;
* New FW channel-switch support;
* Support new ACPI value for per-platform antenna gain;
* Support for single antenna diversity;
* Support for new WoWLAN FW API;
* Initial refactoring of the device selection code;
* A bunch of clean-ups;
* Other small fixes and improvements;
-----BEGIN PGP SIGNATURE-----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=1L5G
-----END PGP SIGNATURE-----
Merge tag 'iwlwifi-next-for-kalle-2019-09-06' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi/iwlwifi-next
Patches intended for v5.4
* Remove (broken) d0i3 support;
* Debug infrastructure work continues;
* Bump support FW API version to 50;
* Fix for the SN value in certain suspend/resume situations;
* Some work on new FW scan APIs;
* Work on LTR FW APIs;
* New FW channel-switch support;
* Support new ACPI value for per-platform antenna gain;
* Support for single antenna diversity;
* Support for new WoWLAN FW API;
* Initial refactoring of the device selection code;
* A bunch of clean-ups;
* Other small fixes and improvements;
Daniel Borkmann says:
====================
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add the ability to use unaligned chunks in the AF_XDP umem. By
relaxing where the chunks can be placed, it allows to use an
arbitrary buffer size and place whenever there is a free
address in the umem. Helps more seamless DPDK AF_XDP driver
integration. Support for i40e, ixgbe and mlx5e, from Kevin and
Maxim.
2) Addition of a wakeup flag for AF_XDP tx and fill rings so the
application can wake up the kernel for rx/tx processing which
avoids busy-spinning of the latter, useful when app and driver
is located on the same core. Support for i40e, ixgbe and mlx5e,
from Magnus and Maxim.
3) bpftool fixes for printf()-like functions so compiler can actually
enforce checks, bpftool build system improvements for custom output
directories, and addition of 'bpftool map freeze' command, from Quentin.
4) Support attaching/detaching XDP programs from 'bpftool net' command,
from Daniel.
5) Automatic xskmap cleanup when AF_XDP socket is released, and several
barrier/{read,write}_once fixes in AF_XDP code, from Björn.
6) Relicense of bpf_helpers.h/bpf_endian.h for future libbpf
inclusion as well as libbpf versioning improvements, from Andrii.
7) Several new BPF kselftests for verifier precision tracking, from Alexei.
8) Several BPF kselftest fixes wrt endianess to run on s390x, from Ilya.
9) And more BPF kselftest improvements all over the place, from Stanislav.
10) Add simple BPF map op cache for nfp driver to batch dumps, from Jakub.
11) AF_XDP socket umem mapping improvements for 32bit archs, from Ivan.
12) Add BPF-to-BPF call and BTF line info support for s390x JIT, from Yauheni.
13) Small optimization in arm64 JIT to spare 1 insns for BPF_MOD, from Jerin.
14) Fix an error check in bpf_tcp_gen_syncookie() helper, from Petar.
15) Various minor fixes and cleanups, from Nathan, Masahiro, Masanari,
Peter, Wei, Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
The variable rx_process_result is being initialized with a value that
is never read and is being re-assigned immediately afterwards. The
assignment is redundant, so replace it with the return from function
lan743x_rx_process_packet.
Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Only use the TROCR register on R-Car Gen3 as it is not present on other
SoCs.
Offsets used for the undocumented registers are considered reserved and
should not be written to. After some internal investigation with Renesas it
remains unclear why this driver accesses these fields on R-Car Gen2 but
regardless of what the historical reasons are the current code is
considered incorrect.
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the use of the undocumented BOC bit of the CCC register.
Current documentation for EtherAVB (ravb) describes the offset of what the
driver uses as the BOC bit as reserved and that only a value of 0 should be
written. After some internal investigation with Renesas it remains unclear
why this driver accesses these fields but regardless of what the historical
reasons are the current code is considered incorrect.
Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch removes the use of the undocumented counter registers
CDCR, LCCR, CERCR, CEECR.
Offsets used for undocumented registers are considered reserved and
should not be written to. After some internal investigation with Renesas
it remains unclear why this driver accesses these fields but regardless of
what the historical reasons are the current code is considered incorrect.
Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
The field name is FBP rather than FPB.
This field is unused and could equally be removed from the driver entirely.
But there seems no harm in leaving as documentation of the presence of the
field.
Based on work by Kazuya Mizuguchi <kazuya.mizuguchi.ks@renesas.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Yoshihiro Shimoda <yoshihiro.shimoda.uh@renesas.com>
Acked-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Use %*ph format to print small buffer as hex string.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When using single_open() for opening, single_release() should be
used instead of seq_release(), otherwise there is a memory leak.
This is detected by Coccinelle semantic patch.
Fixes: 610247f46feb ("rtlwifi: Improve debugging by using debugfs")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
When using single_open(), single_release() should be used instead
of seq_release(), otherwise there is a memory leak.
This is detected by Coccinelle semantic patch.
Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Obviously, variable 'copied' is initialized to zero. But it is not used.
hence just remove it.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This is a trivial debugfs entry for triggering reset just like in case
of firmware crash. It works by writing 1 to it:
echo 1 > reset
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
In case of compiling driver without DEBUG expose a stub function to make
writing debug code much simpler (no extra conditions). This will allow
e.g. using debugfs_create_file() without any magic if or #ifdef.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Fourth set of fixes for 5.3, and hopefully really the last one. Quite
a few CVE fixes this time but at least to my knowledge none of them
have a known exploit.
mt76
* workaround firmware hang by disabling hardware encryption on MT7630E
* disable 5GHz band for MT7630E as it's not working properly
mwifiex
* fix IE parsing to avoid a heap buffer overflow
iwlwifi
* fix for QuZ device initialisation
rt2x00
* another fix for rekeying
* revert a commit causing degradation in rx signal levels
rsi
* fix a double free
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEcBAABAgAGBQJdcRNmAAoJEG4XJFUm622bGicIAINfu1/7FcDXXEcBmA3ySXM+
VwH9+RF/pW+2bzlPDDFD97i9F6E/9cLnJyJBk0ESpXmdBBRuMw5jQnhpcVUAx7+z
q/Xr5YUyqQYR86HK3UISvF2cgZtern/zhArJL4KJIyzYNX6iHxB8ApGGPHntU5vv
3zdIWqGMWcYpD2IGBs1IPQqn0q3LL/LigZ5v4WMoFNgCVmPfGcjaLFdaiwG/xDFU
2sduxv0hT+JqAbqjDBC/LWCeUGN3W55MEmgGZBjTDuZWZGn+obLcvOLbxJWpSM0d
By3j1FpJ4bEDntvlxdobkjFUcQAWSkvDXXS89b2j1uKEDQ0/MFkj+0QA6dx/bmI=
=0uUN
-----END PGP SIGNATURE-----
Merge tag 'wireless-drivers-for-davem-2019-09-05' of git://git.kernel.org/pub/scm/linux/kernel/git/kvalo/wireless-drivers
Kalle Valo says:
====================
wireless-drivers fixes for 5.3
Fourth set of fixes for 5.3, and hopefully really the last one. Quite
a few CVE fixes this time but at least to my knowledge none of them
have a known exploit.
mt76
* workaround firmware hang by disabling hardware encryption on MT7630E
* disable 5GHz band for MT7630E as it's not working properly
mwifiex
* fix IE parsing to avoid a heap buffer overflow
iwlwifi
* fix for QuZ device initialisation
rt2x00
* another fix for rekeying
* revert a commit causing degradation in rx signal levels
rsi
* fix a double free
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
hclge_dbg_get_m7_info is used only in the hclge_debugfs.c,
so it should be declared with static.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If the selftest and reset are performed at the same time, the loopback
setting may be still in the enable state after the reset. As a result,
packets cannot be sent out.
This patch fixes this issue by disabling loopback in hclge_mac_init.
Signed-off-by: Yufeng Mo <moyufeng@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Relational and logical operators evaluate to bool,
explicit conversion is overly verbose and unnecessary.
Signed-off-by: Guojia Liao <liaoguojia@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
HNS3 driver can only unregister client which included in hnae3_client_list.
This patch adds the client node validity judgment.
Signed-off-by: Peng Li <lipeng321@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Since hclge_get_reset_level may return HNAE3_NONE_RESET,
so hdev->reset_level can not be assigned with the return
value in the hclge_reset(), otherwise, it will cause
the use of hdev->reset_level in hclge_reset_event get
into error.
Fixes: 012fcb52f67c ("net: hns3: activate reset timer when calling reset_event")
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In original codes, the VF index used incorrectly in function
hclge_set_vlan_rx_offload_cfg() and hclge_set_vlan_rx_offload_cfg().
When VF id is greater than 8, for example 9, it will set the
same bit with VF id 1.
This patch fixes it by using vport->vport_id % HCLGE_VF_NUM_PER_CMD /
HCLGE_VF_NUM_PER_BYTE as the array index, instead of vport->vport_id /
HCLGE_VF_NUM_PER_CMD.
Fixes: 052ece6dc19c ("net: hns3: add ethtool related offload command")
Signed-off-by: Jian Shen <shenjian15@huawei.com>
Signed-off-by: Huazhong Tan <tanhuazhong@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch amends the error and warning messages across the platform driver.
It includes the following changes:
- append \n to the end of messages
- change pr_* macros to dev_*
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While running stmmac selftests I found that in my 1G setup some tests
were failling when running with PHY loopback enabled.
It looks like when loopback is enabled the PHY will report that Link is
down even though there is a valid connection.
As in loopback mode the data will not be sent anywhere we can bypass the
logic of checking if Link is valid thus saving unecessary reads.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
When testing with a background iperf pushing 1Gbit/sec traffic and running
both ifconfig and netstat to collect statistics, some deadlocks occurred.
Ifconfig and netstat will call nv_get_stats64 to get software xmit/recv
statistics. In the commit f5d827aece36 ("forcedeth: implement
ndo_get_stats64() API"), the normal tx/rx variables is to collect tx/rx
statistics. The fix is to replace normal tx/rx variables with per
cpu 64-bit variable to collect xmit/recv statistics. The per cpu variable
will avoid deadlocks and provide fast efficient statistics updates.
In nv_probe, the per cpu variable is initialized. In nv_remove, this
per cpu variable is freed.
In xmit/recv process, this per cpu variable will be updated.
In nv_get_stats64, this per cpu variable on each cpu is added up. Then
the driver can get xmit/recv packets statistics.
A test runs for several days with this commit, the deadlocks disappear
and the performance is better.
Tested:
- iperf SMP x86_64 ->
Client connecting to 1.1.1.108, TCP port 5001
TCP window size: 85.0 KByte (default)
------------------------------------------------------------
[ 3] local 1.1.1.105 port 38888 connected with 1.1.1.108 port 5001
[ ID] Interval Transfer Bandwidth
[ 3] 0.0-10.0 sec 1.10 GBytes 943 Mbits/sec
ifconfig results:
enp0s9 Link encap:Ethernet HWaddr 00:21:28:6f:de:0f
inet addr:1.1.1.105 Bcast:0.0.0.0 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:5774764531 errors:0 dropped:0 overruns:0 frame:0
TX packets:633534193 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:7646159340904 (7.6 TB) TX bytes:11425340407722 (11.4 TB)
netstat results:
Kernel Interface table
Iface MTU Met RX-OK RX-ERR RX-DRP RX-OVR TX-OK TX-ERR TX-DRP TX-OVR Flg
...
enp0s9 1500 0 5774764531 0 0 0 633534193 0 0 0 BMRU
...
Fixes: f5d827aece36 ("forcedeth: implement ndo_get_stats64() API")
CC: Joe Jin <joe.jin@oracle.com>
CC: JUNXIAO_BI <junxiao.bi@oracle.com>
Reported-and-tested-by: Nan san <nan.1986san@gmail.com>
Signed-off-by: Zhu Yanjun <yanjun.zhu@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
NETDEV_TX_BUSY really should only be used by drivers that call
netif_tx_stop_queue() at the wrong moment. If dma_map_single() is
failed to map tx DMA buffer, it might trigger an infinite loop.
This patch use NETDEV_TX_OK instead of NETDEV_TX_BUSY, and change
printk to pr_err_ratelimited.
Fixes: d9fb9f384292 ("*sonic/natsemi/ns83829: Move the National Semi-conductor drivers")
Signed-off-by: Mao Wenan <maowenan@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Continue is not needed at the bottom of a loop.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Use cancel_delayed_work_sync on the dump workers only in case of
unloading the op mode. In any other case use iwl_fw_flush_dumps or
iwl_fw_dbg_stop_sync (depends if the op mode mutex is held or not).
This way, the driver will wait until debug data is collected in all
cases but op mode unloading.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Remove periodic trigger functionality.
After moving to the new API we will add periodic trigger functionality
that matches the new API.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Fix the documentation of struct iwl_fw_ini_monitor_dump and
iwl_fw_ini_error_dump_range.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Add support code to be able to use the DRAM buffer allocation command,
which allows us to send information about a buffer to the firmware
to use it with the DBGC hardware.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Remove the "apply points" mechanism as preparation for the changed
debug API where this is now a "time point" instead. Use a new API
across the code at the trigger points ("time points"), but don't
yet implement it since that requires some more preparation.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Allows to easily calculate array length at the end of a TLV.
Signed-off-by: Shahar S Matityahu <shahar.s.matityahu@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
Sometimes the firmware won't be able to decrypt frames
because the keys were not installed yet or other scenarios.
The firmware will soon stop dropping multicast frames when
MAC_FILTER_ACCEPT_GRP is not set. The firmware will simply
always pass multicast frame in.
In order to avoid logging any such frame coming in when we
don't have the keys, drop the print.
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Luca Coelho <luciano.coelho@intel.com>
