commit 358040e3807754944dbddf948a23c6d914297ed7 upstream.
The update of rate_num/den and msbits were factored out to
fixup_unreferenced_params() function to be called explicitly after the
hw_refine or hw_params procedure. It's called from
snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl.
This ended up with the incomplete rate_num/den and msbits parameters
when 32bit compat ioctl is used.
This patch adds the missing call in snd_pcm_ioctl_hw_params_compat().
Reported-by: Meng_Cai@novatek.com.cn
Fixes: f9a076bff0 ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230829134344.31588-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit db4bfcba7bb8d10f00bba2a3da6b9a9c2a1d7b71 ]
Use "select" to ensure that the required kconfig symbols are set
as expected.
Drop HOSTAUDIO since it is now equivalent to UML_SOUND.
Set CONFIG_SOUND=m in ARCH=um defconfig files to maintain the
status quo of the default configs.
Allow SOUND with UML regardless of HAS_IOMEM. Otherwise there is a
kconfig warning for unmet dependencies. (This was not an issue when
SOUND was defined in arch/um/drivers/Kconfig. I have done 50 randconfig
builds and didn't find any issues.)
This fixes build errors when CONFIG_SOUND is not set:
ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_cleanup_module':
hostaudio_kern.c:(.exit.text+0xa): undefined reference to `unregister_sound_mixer'
ld: hostaudio_kern.c:(.exit.text+0x15): undefined reference to `unregister_sound_dsp'
ld: arch/um/drivers/hostaudio_kern.o: in function `hostaudio_init_module':
hostaudio_kern.c:(.init.text+0x19): undefined reference to `register_sound_dsp'
ld: hostaudio_kern.c:(.init.text+0x31): undefined reference to `register_sound_mixer'
ld: hostaudio_kern.c:(.init.text+0x49): undefined reference to `unregister_sound_dsp'
and this kconfig warning:
WARNING: unmet direct dependencies detected for SOUND
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Fixes: d886e87cb8 ("sound: make OSS sound core optional")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Closes: lore.kernel.org/r/202307141416.vxuRVpFv-lkp@intel.com
Cc: Richard Weinberger <richard@nod.at>
Cc: Anton Ivanov <anton.ivanov@cambridgegreys.com>
Cc: Johannes Berg <johannes@sipsolutions.net>
Cc: linux-um@lists.infradead.org
Cc: Tejun Heo <tj@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Masahiro Yamada <masahiroy@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Nicolas Schier <nicolas@fjasle.eu>
Cc: linux-kbuild@vger.kernel.org
Cc: alsa-devel@alsa-project.org
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Richard Weinberger <richard@nod.at>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 67de40c9df94037769967ba28c7d951afb45b7fb ]
Before committing 79597c8bf64c, *rac97 always be NULL if there is
an error. When error happens, make sure *rac97 is NULL is safer.
For examble, in snd_vortex_mixer():
err = snd_ac97_mixer(pbus, &ac97, &vortex->codec);
vortex->isquad = ((vortex->codec == NULL) ?
0 : (vortex->codec->ext_id&0x80));
If error happened but vortex->codec isn't NULL, this may cause some
problems.
Move the judgement order to be clearer and better.
Fixes: 79597c8bf64c ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 297224fc0922e7385573a30c29ffdabb67f27b7d ]
Although snd_seq_oss_midi_open() and snd_seq_oss_midi_close() can be
called concurrently from different code paths, we have no proper data
protection against races. Introduce open_mutex to each seq_oss_midi
object for avoiding the races.
Reported-by: "Gong, Sishuai" <sishuai@purdue.edu>
Closes: https://lore.kernel.org/r/7DC9AF71-F481-4ABA-955F-76C535661E33@purdue.edu
Link: https://lore.kernel.org/r/20230612125533.27461-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f85739c0b2b0d98a32f5ca4fcc5501d2b76df4f6 ]
The 8K sample parameter of 12.288Mhz main system bus clock doesn't work
because the I2SC_MR.IMCKDIV must not be 0 according to the sama5d2
series datasheet(I2SC Mode Register of Register Summary).
So use the 6.144Mhz instead of 12.288Mhz to support 8K sample.
Signed-off-by: Guiting Shen <aarongt.shen@gmail.com>
Link: https://lore.kernel.org/r/20230715030620.62328-1-aarongt.shen@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d20d35d1ad62c6cca36368c1e8f29335a068659e ]
According to the datasheet, the DMIC config should
be changed to { 0, 2 ,3 }
Signed-off-by: Edgar <ljijcj@163.com>
Link: https://lore.kernel.org/r/20230719054722.401954-1-ljijcj@163.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f0691dc16206f21b13c464434366e2cd632b8ed7 ]
When handling an AAD interrupt, if IRQ events read failed (for example,
due to i2c "Transfer while suspended" failure, i.e. when attempting to
read it while DA7219 is suspended, which may happen due to a spurious
AAD interrupt), the events array contains garbage uninitialized values.
So instead of trying to interprete those values and doing any actions
based on them (potentially resulting in misbehavior, e.g. reporting
bogus events), refuse to handle the interrupt.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/r/20230717193737.161784-3-dmy@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91e292917dad64ab8d1d5ca2ab3069ad9dac6f72 ]
da7219_aad_suspend() disables jack detection, which should prevent
generating new interrupts by DA7219 while suspended. However, there is a
theoretical possibility that there is a pending interrupt generated just
before suspending DA7219 and not handled yet, so the IRQ handler may
still run after DA7219 is suspended. To prevent that, wait until the
pending IRQ handling is done.
This patch arose as an attempt to fix the following I2C failure
occurring sometimes during system suspend or resume:
[ 355.876211] i2c_designware i2c_designware.3: Transfer while suspended
[ 355.876245] WARNING: CPU: 2 PID: 3576 at drivers/i2c/busses/i2c-designware-master.c:570 i2c_dw_xfer+0x411/0x440
...
[ 355.876462] Call Trace:
[ 355.876468] <TASK>
[ 355.876475] ? update_load_avg+0x1b3/0x615
[ 355.876484] __i2c_transfer+0x101/0x1d8
[ 355.876494] i2c_transfer+0x74/0x10d
[ 355.876504] regmap_i2c_read+0x6a/0x9c
[ 355.876513] _regmap_raw_read+0x179/0x223
[ 355.876521] regmap_raw_read+0x1e1/0x28e
[ 355.876527] regmap_bulk_read+0x17d/0x1ba
[ 355.876532] ? __wake_up+0xed/0x1bb
[ 355.876542] da7219_aad_irq_thread+0x54/0x2c9 [snd_soc_da7219 5fb8ebb2179cf2fea29af090f3145d68ed8e2184]
[ 355.876556] irq_thread+0x13c/0x231
[ 355.876563] ? irq_forced_thread_fn+0x5f/0x5f
[ 355.876570] ? irq_thread_fn+0x4d/0x4d
[ 355.876576] kthread+0x13a/0x152
[ 355.876581] ? synchronize_irq+0xc3/0xc3
[ 355.876587] ? kthread_blkcg+0x31/0x31
[ 355.876592] ret_from_fork+0x1f/0x30
[ 355.876601] </TASK>
which indicates that the AAD IRQ handler is unexpectedly running when
DA7219 is suspended, and as a result, is trying to read data from DA7219
over I2C and is hitting the I2C driver "Transfer while suspended"
failure.
However, with this patch the above failure is still reproducible. So
this patch does not fix any real observed issue so far, but at least is
useful for confirming that the above issue is not caused by a pending
IRQ but rather looks like a DA7219 hardware issue with an IRQ
unexpectedly generated after jack detection is already disabled.
Signed-off-by: Dmytro Maluka <dmy@semihalf.com>
Link: https://lore.kernel.org/r/20230717193737.161784-2-dmy@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9266d95405ae0c078f188ec8bca3a004631be429 upstream.
The device checking error should be a jump to pm_runtime_put_autosuspend()
as done before returning value.
Fixes: 867f8d18df4f ('ASoC: rt5682: fix getting the wrong device id when the suspend_stress_test')
Reviewed-by: Bard Liao <bard.liao@intel.com>
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20210607222239.582139-13-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Nobuhiro Iwamatsu <nobuhiro1.iwamatsu@toshiba.co.jp>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 683b0df26c3333a5c020a2764b71a70d082c1c61 upstream.
Some boards use different circuits for jack detection.
This patch adds two modes as below
1. JD2/2 ports/external resister 100k
2. JD2/1 port/JD voltage 1.8V
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20210617090822.16960-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Philip Müller <philm@manjaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bd55842ed998a622ba6611fe59b3358c9f76773d ]
The PCM memory allocation helpers have a sanity check against too many
buffer allocations. However, the check is performed without a proper
lock and the allocation isn't serialized; this allows user to allocate
more memories than predefined max size.
Practically seen, this isn't really a big problem, as it's more or
less some "soft limit" as a sanity check, and it's not possible to
allocate unlimitedly. But it's still better to address this for more
consistent behavior.
The patch covers the size check in do_alloc_pages() with the
card->memory_mutex, and increases the allocated size there for
preventing the further overflow. When the actual allocation fails,
the size is decreased accordingly.
Reported-by: BassCheck <bass@buaa.edu.cn>
Reported-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/CADm8Tek6t0WedK+3Y6rbE5YEt19tML8BUL45N2ji4ZAz1KcN_A@mail.gmail.com
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230703112430.30634-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46cdff2369cbdf8d78081a22526e77bd1323f563 ]
Set spec->en_3kpull_low default to true.
Then fillback ALC236 and ALC257 to false.
Additional note: this addresses a regression caused by the previous
fix 69ea4c9d02b7 ("ALSA: hda/realtek - remove 3k pull low procedure").
The previous workaround was applied too widely without necessity,
which resulted in the pop noise at PM again. This patch corrects the
condition and restores the old behavior for the devices that don't
suffer from the original problem.
Fixes: 69ea4c9d02b7 ("ALSA: hda/realtek - remove 3k pull low procedure")
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217732
Link: https://lore.kernel.org/r/01e212a538fc407ca6edd10b81ff7b05@realtek.com
Signed-off-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c1f848f12103920ca165758aedb1c10904e193e1 ]
When the tdm lane mask is computed, the driver currently fills the 1st lane
before moving on to the next. If the stream has less channels than the
lanes can accommodate, slots will be disabled on the last lanes.
Unfortunately, the HW distribute channels in a different way. It distribute
channels in pair on each lanes before moving on the next slots.
This difference leads to problems if a device has an interface with more
than 1 lane and with more than 2 slots per lane.
For example: a playback interface with 2 lanes and 4 slots each (total 8
slots - zero based numbering)
- Playing a 8ch stream:
- All slots activated by the driver
- channel #2 will be played on lane #1 - slot #0 following HW placement
- Playing a 4ch stream:
- Lane #1 disabled by the driver
- channel #2 will be played on lane #0 - slot #2
This behaviour is obviously not desirable.
Change the way slots are activated on the TDM lanes to follow what the HW
does and make sure each channel always get mapped to the same slot/lane.
Fixes: 1a11d88f49 ("ASoC: meson: add tdm formatter base driver")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20230809171931.1244502-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f4a08fed450db87fbb5ff5105354158bdbe1a22 ]
The variable codec->regmap is often protected by the lock
codec->regmap_lock when is accessed. However, it is accessed without
holding the lock when is accessed in snd_hdac_regmap_sync():
if (codec->regmap)
In my opinion, this may be a harmful race, because if codec->regmap is
set to NULL right after the condition is checked, a null-pointer
dereference can occur in the called function regcache_sync():
map->lock(map->lock_arg); --> Line 360 in drivers/base/regmap/regcache.c
To fix this possible null-pointer dereference caused by data race, the
mutex_lock coverage is extended to protect the if statement as well as the
function call to regcache_sync().
[ Note: the lack of the regmap_lock itself is harmless for the current
codec driver implementations, as snd_hdac_regmap_sync() is only for
PM runtime resume that is prohibited during the codec probe.
But the change makes the whole code more consistent, so it's merged
as is -- tiwai ]
Reported-by: BassCheck <bass@buaa.edu.cn>
Signed-off-by: Tuo Li <islituo@gmail.com>
Link: https://lore.kernel.org/r/20230703031016.1184711-1-islituo@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 73f1c75d5e6bd8ce2a887ef493a66ad1b16ed704 ]
These models use NSIWAY amplifiers for internal speaker, but cannot put
sound outside from these amplifiers. So eapd verbs are needed to initialize
the amplifiers. They can be added during boot to get working sound out
of internal speaker.
Signed-off-by: dengxiang <dengxiang@nfschina.com>
Link: https://lore.kernel.org/r/20230703021751.2945750-1-dengxiang@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit dfe25fea968dc4884e12d471c8263f0f611b380a ]
We should use RT711_JD2_100K for on board rt711
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-9-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 289e1df00e49a229a1c924c059242e759a552f01 ]
We should use RT711_JD2_100K for on board rt711.
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Link: https://lore.kernel.org/r/20230512173305.65399-4-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e51df4f81b02bcdd828a04de7c1eb6a92988b61e upstream.
In commit 2cb1e0259f ("ASoC: cs42l51: re-hook of_match_table
pointer"), 9 years ago, some random guy fixed the cs42l51 after it was
split into a core part and an I2C part to properly match based on a
Device Tree compatible string.
However, the fix in this commit is wrong: the MODULE_DEVICE_TABLE(of,
....) is in the core part of the driver, not the I2C part. Therefore,
automatic module loading based on module.alias, based on matching with
the DT compatible string, loads the core part of the driver, but not
the I2C part. And threfore, the i2c_driver is not registered, and the
codec is not known to the system, nor matched with a DT node with the
corresponding compatible string.
In order to fix that, we move the MODULE_DEVICE_TABLE(of, ...) into
the I2C part of the driver. The cs42l51_of_match[] array is also moved
as well, as it is not possible to have this definition in one file,
and the MODULE_DEVICE_TABLE(of, ...) invocation in another file, due
to how MODULE_DEVICE_TABLE works.
Thanks to this commit, the I2C part of the driver now properly
autoloads, and thanks to its dependency on the core part, the core
part gets autoloaded as well, resulting in a functional sound card
without having to manually load kernel modules.
Fixes: 2cb1e0259f ("ASoC: cs42l51: re-hook of_match_table pointer")
Cc: stable@vger.kernel.org
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link: https://lore.kernel.org/r/20230713112112.778576-1-thomas.petazzoni@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f061e2be8689057cb4ec0dbffa9f03e1a23cdcb2 upstream.
The WM8904_ADC_TEST_0 register is modified as part of updating the OSR
controls but does not have a cache default, leading to errors when we try
to modify these controls in cache only mode with no prior read:
wm8904 3-001a: ASoC: error at snd_soc_component_update_bits on wm8904.3-001a for register: [0x000000c6] -16
Add a read of the register to probe() to fill the cache and avoid both the
error messages and the misconfiguration of the chip which will result.
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230723-asoc-fix-wm8904-adc-test-read-v1-1-2cdf2edd83fd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0e4c2b6b0c4a4b4014d9424c27e5e79d185229c5 ]
Clear TX registers on stop to prevent the SPDIF interface from sending
last written word over and over again.
Fixes: a2388a498a ("ASoC: fsl: Add S/PDIF CPU DAI driver")
Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20230719164729.19969-1-matuszpd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 269f399dc19f0e5c51711c3ba3bd06e0ef6ef403 upstream.
Otherwise bit clock remains running writing invalid data to the DAC.
Signed-off-by: Matus Gajdos <matuszpd@gmail.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230712124934.32232-1-matuszpd@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0659400f18c0e6c0c69d74fe5d09e7f6fbbd52a2 upstream.
The HP Laptop 15s-eq2xxx uses ALC236 codec and controls the mute LED using
COEF 0x07 index 1. No existing quirk covers this configuration.
Adds a new quirk and enables it for the device.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230718161241.393181-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69ea4c9d02b7947cdd612335a61cc1a02e544ccd upstream.
This was the ALC283 depop procedure.
Maybe this procedure wasn't suitable with new codec.
So, let us remove it. But HP 15z-fc000 must do 3k pull low. If it
reboot with plugged headset,
it will have errors show don't find codec error messages. Run 3k pull
low will solve issues.
So, let AMD chipset will run this for workarround.
Fixes: 5aec98913095 ("ALSA: hda/realtek - ALC236 headset MIC recording issue")
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Reported-by: Joseph C. Sible <josephcsible@gmail.com>
Closes: https://lore.kernel.org/r/CABpewhE4REgn9RJZduuEU6Z_ijXNeQWnrxO1tg70Gkw=F8qNYg@mail.gmail.com/
Link: https://lore.kernel.org/r/4678992299664babac4403d9978e7ba7@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a46d37012a5be1737393b8f82fd35665e4556eee upstream.
If the second component fails to initialize, cleanup the first on.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@kernel.org
Fixes: f1b5bf0736 ("ASoC: mt2701/mt8173: replace platform to component")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-1-432aa99ce24d@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f9c058d14f4fe23ef523a7ff73734d51c151683c upstream.
After reordering the irq probe, the error path was not properly done.
Lets fix it.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Cc: stable@kernel.org
Fixes: 4cbb264d4e91 ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready")
Signed-off-by: Ricardo Ribalda Delgado <ribalda@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20230612-mt8173-fixup-v2-2-432aa99ce24d@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 89dbb335cb6a627a4067bc42caa09c8bc3326d40 ]
snd_jack_report() is supposed to be callable from an IRQ context, too,
and it's indeed used in that way from virtsnd driver. The fix for
input_dev race in commit 1b6a6fc5280e ("ALSA: jack: Access input_dev
under mutex"), however, introduced a mutex lock in snd_jack_report(),
and this resulted in a potential sleep-in-atomic.
For addressing that problem, this patch changes the relevant code to
use the object get/put and removes the mutex usage. That is,
snd_jack_report(), it takes input_get_device() and leaves with
input_put_device() for assuring the input_dev being assigned.
Although the whole mutex could be reduced, we keep it because it can
be still a protection for potential races between creation and
deletion.
Fixes: 1b6a6fc5280e ("ALSA: jack: Access input_dev under mutex")
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Closes: https://lore.kernel.org/r/cf95f7fe-a748-4990-8378-000491b40329@moroto.mountain
Tested-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230706155357.3470-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60413129ee2b38a80347489270af7f6e1c1de4d0 ]
When using the codec through the generic audio graph card, there are at
least two calls of es8316_set_dai_sysclk(), with the effect of limiting
the allowed sample rates according to the MCLK/LRCK ratios supported by
the codec:
1. During audio card setup, to set the initial MCLK - see
asoc_simple_init_dai().
2. Before opening a stream, to update MCLK, according to the stream
sample rate and the multiplication factor - see
asoc_simple_hw_params().
In some cases the initial MCLK might be set to a frequency that doesn't
match any of the supported ratios, e.g. 12287999 instead of 12288000,
which is only 1 Hz below the supported clock, as that is what the
hardware reports. This creates an empty list of rate constraints, which
is further passed to snd_pcm_hw_constraint_list() via
es8316_pcm_startup(), and causes the following error on the very first
access of the sound card:
$ speaker-test -D hw:Analog,0 -F S16_LE -c 2 -t wav
Broken configuration for playback: no configurations available: Invalid argument
Setting of hwparams failed: Invalid argument
Note that all subsequent retries succeed thanks to the updated MCLK set
at point 2 above, which uses a computed frequency value instead of a
reading from the hardware registers. Normally this would have mitigated
the issue, but es8316_pcm_startup() executes before the 2nd call to
es8316_set_dai_sysclk(), hence it cannot make use of the updated
constraints.
Since es8316_pcm_hw_params() performs anyway a final validation of MCLK
against the stream sample rate and the supported MCLK/LRCK ratios, fix
the issue by ensuring that sysclk_constraints list is only set when at
least one supported sample rate is autodetected by the codec.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6f073429037cd79d7311cd8236311c53f5ea8f01 ]
The following error occurs when trying to restore a previously saved
ALSA mixer state (tested on a Rock 5B board):
$ alsactl --no-ucm -f /tmp/asound.state store hw:Analog
$ alsactl --no-ucm -I -f /tmp/asound.state restore hw:Analog
alsactl: set_control:1475: Cannot write control '2:0:0:ALC Capture Target Volume:0' : Invalid argument
According to ES8316 datasheet, the register at address 0x2B, which is
related to the above mixer control, contains by default the value 0xB0.
Considering the corresponding ALC target bits (ALCLVL) are 7:4, the
control is initialized with 11, which is one step above the maximum
value allowed by the driver:
ALCLVL | dB gain
-------+--------
0000 | -16.5
0001 | -15.0
0010 | -13.5
.... | .....
0111 | -6.0
1000 | -4.5
1001 | -3.0
1010 | -1.5
.... | .....
1111 | -1.5
The tests performed using the VU meter feature (--vumeter=TYPE) of
arecord/aplay confirm the specs are correct and there is no measured
gain if the 1011-1111 range would have been mapped to 0 dB:
dB gain | VU meter %
--------+-----------
-6.0 | 30-31
-4.5 | 35-36
-3.0 | 42-43
-1.5 | 50-51
0.0 | 50-51
Increment the max value allowed for ALC Capture Target Volume control,
so that it matches the hardware default. Additionally, update the
related TLV to prevent an artificial extension of the dB gain range.
Fixes: b8b88b7087 ("ASoC: add es8316 codec driver")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20230530181140.483936-2-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e384dba03e3294ce7ea69e4da558e9bf8f0e8946 ]
Add entries for Positivo laptops: CW14Q01P, K1424G, N14ZP74G to the
DMI table, so that active-high jack-detect will work properly on
these laptops.
Signed-off-by: Edson Juliano Drosdeck <edson.drosdeck@gmail.com>
Link: https://lore.kernel.org/r/20230529181911.632851-1-edson.drosdeck@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8938f75a5e35c597a647c28984a0304da7a33d63 ]
In the error path, a of_node_put() for platform is missing.
Just add it.
Signed-off-by: Herve Codina <herve.codina@bootlin.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/20230523151223.109551-9-herve.codina@bootlin.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e123036be377ddf628226a7c6d4f9af5efd113d3 ]
In the BE hw_params configuration, the existing code checks if any of the
existing FEs are prepared, running, paused or suspended - and skips the
configuration in those cases. This allows multiple calls of hw_params
which the ALSA state machine supports.
This check is not handled for the prepare stage, which can lead to the
same BE being prepared multiple times. This patch adds a check similar to
that of the hw_params, with the main difference being that the suspended
state is allowed: the ALSA state machine allows a transition from
suspended to prepared with hw_params skipped.
This problem was detected on Intel IPC4/SoundWire devices, where the BE
dailink .prepare stage is used to configure the SoundWire stream with a
bank switch. Multiple .prepare calls lead to conflicts with the .trigger
operation with IPC4 configurations. This problem was not detected earlier
on Intel devices, HDaudio BE dailinks detect that the link is already
prepared and skip the configuration, and for IPC3 devices there is no BE
trigger.
Link: https://github.com/thesofproject/sof/issues/7596
Signed-off-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com
Link: https://lore.kernel.org/r/20230517185731.487124-1-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6e7a6d4797ef521c0762914610ed682e102b9d36 ]
regmap-sdw does not support multi register writes, so there is
no point in setting this flag. This also leads to incorrect
programming of WSA codecs with regmap_multi_reg_write() call.
This invalid configuration should have been rejected by regmap-sdw.
Fixes: a0aab9e140 ("ASoC: codecs: add wsa881x amplifier support")
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20230523154605.4284-2-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 7ca4c8d4d3f41c2cd9b4cf22bb829bf03dac0956 upstream.
Headset microphone on this platform does not work without
ALC897_FIXUP_HEADSET_MIC_PIN fixup.
Signed-off-by: RenHai <kean0048@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230602003604.975892-1-kean0048@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 527c356b51f3ddee02c9ed5277538f85e30a2cdc upstream.
Add a quirk for HP Slim Desktop S01 to fixup headset MIC no presence.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230526094704.14597-1-aichao@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 040b5a046a9e18098580d3ccd029e2318fca7859 ]
Two functions are defined and used in pcm_oss.c but also optionally
used from io.c, with an optional prototype. If CONFIG_SND_PCM_OSS_PLUGINS
is disabled, this causes a warning as the functions are not static
and have no prototype:
sound/core/oss/pcm_oss.c:1235:19: error: no previous prototype for 'snd_pcm_oss_write3' [-Werror=missing-prototypes]
sound/core/oss/pcm_oss.c:1266:19: error: no previous prototype for 'snd_pcm_oss_read3' [-Werror=missing-prototypes]
Avoid this by making the prototypes unconditional.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230516195046.550584-2-arnd@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f63550e2b165208a2f382afcaf5551df9569e1d4 ]
Apply a workaround for what appears to be a hardware quirk.
The problem seems to happen when enabling "whole chip power" (bit D7
register R6) for the very first time after the chip receives power. If
either "output" (D4) or "DAC" (D3) aren't powered on at that time,
playback becomes very distorted later on.
This happens on the Google Chameleon v3, as well as on a ZYBO Z7-10:
https://ez.analog.com/audio/f/q-a/543726/solved-ssm2603-right-output-offset-issue/480229
I suspect this happens only when using an external MCLK signal (which
is the case for both of these boards).
Here are some experiments run on a Google Chameleon v3. These were run
in userspace using a wrapper around the i2cset utility:
ssmset() {
i2cset -y 0 0x1a $(($1*2)) $2
}
For each of the following sequences, we apply power to the ssm2603
chip, set the configuration registers R0-R5 and R7-R8, run the selected
sequence, and check for distortions on playback.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x87 # out, dac
ssmset 0x06 0x07 # chip
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
(enable MCLK)
OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x1f # chip
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x06 0x1f # chip
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # out, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
ssmset 0x06 0x07 # dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
ssmset 0x06 0x07 # out
NOT OK
For each of the following sequences, we apply power to the ssm2603
chip, run the selected sequence, issue a reset with R15, configure
R0-R5 and R7-R8, run one of the NOT OK sequences from above, and check
for distortions.
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
OK
(disable MCLK)
ssmset 0x09 0x01 # core
ssmset 0x06 0x07 # chip, out, dac
(enable MCLK after reset)
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x17 # chip, dac
NOT OK
ssmset 0x09 0x01 # core
ssmset 0x06 0x0f # chip, out
NOT OK
ssmset 0x06 0x07 # chip, out, dac
NOT OK
Signed-off-by: Paweł Anikiel <pan@semihalf.com
Link: https://lore.kernel.org/r/20230508113037.137627-8-pan@semihalf.com
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ab6ecfbf40fccf74b6ec2ba7ed6dd2fc024c3af2 ]
On slow CPU (FPGA/QEMU emulated) printing overrun messages from
interrupt handler to uart console may leads to more overrun errors.
So use dev_err_ratelimited to limit the number of error messages.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru
Link: https://lore.kernel.org/r/20230505062820.21840-1-fido_max@inbox.ru
Signed-off-by: Mark Brown <broonie@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c51e431052e2eacfb23fbf6b39bc6c8770d9827a ]
Add a set of HD Audio PCI IDS, and the HDMI codec vendor IDs for
Glenfly Gpus.
- In default_bdl_pos_adj, set bdl to 128 as Glenfly Gpus have hardware
limitation, need to increase hdac interrupt interval.
- In azx_first_init, enable polling mode for Glenfly Gpu. When the codec
complete the command, it sends interrupt and writes response entries to
memory, howerver, the write requests sometimes are not actually
synchronized to memory when driver handle hdac interrupt on Glenfly Gpus.
If the RIRB status is not updated in the interrupt handler,
azx_rirb_get_response keeps trying to recevie a response from rirb until
1s timeout. Enabling polling mode for Glenfly Gpu can fix the issue.
- In patch_gf_hdmi, set Glenlfy Gpu Codec's no_sticky_stream as it need
driver to do actual clean-ups for the linked codec when switch from one
codec to another.
Signed-off-by: jasontao <jasontao@glenfly.com>
Signed-off-by: Reaper Li <reaperlioc@glenfly.com>
Link: https://lore.kernel.org/r/20230426013059.4329-1-reaperlioc@glenfly.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ca110cab46561cd74a2acd9b447435acb4bec5f upstream.
Lenovo M70/M90 Gen4 are equipped with ALC897, and they need
ALC897_FIXUP_HEADSET_MIC_PIN quirk to make its headset mic work.
The previous quirk for M70/M90 is for Gen3.
Signed-off-by: Bin Li <bin.li@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230524113755.1346928-1-bin.li@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 81302b1c7c997e8a56c1c2fc63a296ebeb0cd2d0 upstream.
It's reported that the recording started right after the driver probe
doesn't work properly, and it turned out that this is related with the
codec auto-suspend. Namely, after the probe phase, the usage count
goes zero, and the auto-suspend is programmed, but the codec is kept
still active until the auto-suspend expiration. When an application
(e.g. alsactl) updates the mixer values at this moment, the values are
cached but not actually written. Then, starting arecord thereafter
also results in the silence because of the missing unmute.
The root cause is the handling of "lazy update" mode; when a mixer
value is updated *after* the suspend, it should update only the cache
and exits. At the resume, the cached value is written to the device,
in turn. The problem is that the current code misinterprets the state
of auto-suspend as if it were already suspended.
Although we can add the check of the actual device state after
pm_runtime_get_if_in_use() for catching the missing state, this won't
suffice; the second call of regmap_update_bits_check() will skip
writing the register because the cache has been already updated by the
first call. So we'd need fixes in two different places.
OTOH, a simpler fix is to replace pm_runtime_get_if_in_use() with
pm_runtime_get_if_active() (with ign_usage_count=true). This change
implies that the driver takes the pm refcount if the device is still
in ACTIVE state and continues the processing. A small caveat is that
this will leave the auto-suspend timer. But, since the timer callback
itself checks the device state and aborts gracefully when it's active,
this won't be any substantial problem.
Long story short: we address the missing register-write problem just
by replacing the pm_runtime_*() call in snd_hda_keep_power_up().
Fixes: fc4f000bf8 ("ALSA: hda - Fix unexpected resume through regmap code path")
Reported-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Closes: https://lore.kernel.org/r/a7478636-af11-92ab-731c-9b13c582a70d@linux.intel.com
Suggested-by: Cezary Rojewski <cezary.rojewski@intel.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230518113520.15213-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7843380d07bbeffd3ce6504e73cf61f840ae76ca upstream.
This quirk is necessary for surround and other DSP effects to work
with the onboard ca0132 based audio chipset for the EVGA X299 dark
mainboard.
Signed-off-by: Adam Stylinski <kungfujesus06@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=67071
Link: https://lore.kernel.org/r/ZGopOe19T1QOwizS@eggsbenedict.adamsnet
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a4671b7fba59775845ee60cfbdfc4ba64300211b upstream.
Add quirk for GU603 with 0x1c62 variant of codec.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230505235824.49607-2-luke@ljones.dev
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 90670ef774a8b6700c38ce1222e6aa263be54d5f upstream.
Add a quirk for HP EliteDesk 805 to fixup ALC3867 headset MIC no sound.
Signed-off-by: Ai Chao <aichao@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230506022653.2074343-1-aichao@kylinos.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc4f2ccaedddb489a83e7b12ebbdc347272aacc9 upstream.
These IDs are for AD102, AD103, AD104, AD106, and AD107 gpus with
audio functions that are largely similar to the existing ones.
Tested audio using gnome-settings, over HDMI, DP-SST and DP-MST
connections on AD106 gpu.
Signed-off-by: Nikhil Mahale <nmahale@nvidia.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230517090736.15088-1-nmahale@nvidia.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3b44ec8c5c44790a82f07e90db45643c762878c6 upstream.
get_line_out_pfx() may trigger an Oops by overflowing the static array
with more than 8 channels. This was reported for MacBookPro 12,1 with
Cirrus codec.
As a workaround, extend for the 9.1 channels and also fix the
potential Oops by unifying the code paths accessing the same array
with the proper size check.
Reported-by: Olliver Schinagl <oliver@schinagl.nl>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/64d95eb0-dbdb-cff8-a8b1-988dc22b24cd@schinagl.nl
Link: https://lore.kernel.org/r/20230516184412.24078-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 359b4315471181f108723c61612d96e383e56179 upstream.
Line6 Pod Go (0e41:424b) requires the similar workaround for the fixed
48k sample rate like other Line6 models. This patch adds the
corresponding entry to line6_parse_audio_format_rate_quirk().
Reported-by: John Humlick <john@humlick.org>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230512075858.22813-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 92553ee03166ef8fa978e7683f9f4af30c9c4e6b ]
The Pavilion 15 line has B&O top speakers similar to the x360 and
applying the same profile produces good sound. Without this, the
sound would be tinny and underpowered without either applying
model=alc295-hp-x360 or booting another OS first.
Signed-off-by: Ryan Underwood <nemesis@icequake.net>
Fixes: 563785edfc ("ALSA: hda/realtek - Add quirk entry for HP Pavilion 15")
Link: https://lore.kernel.org/r/ZF0mpcMz3ezP9KQw@icequake.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c0e72058d5e21982e61a29de6b098f7c1f0db498 ]
This code was supposed to return an error code if init_stream()
failed, but it instead freed dg00x->rx_stream and returned success.
This potentially leads to a use after free.
Fixes: 9a08067ec3 ("ALSA: firewire-digi00x: support AMDTP domain")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Link: https://lore.kernel.org/r/c224cbd5-d9e2-4cd4-9bcf-2138eb1d35c6@kili.mountain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d727e1856ef22dd9337199430258cb64cbbc658 ]
Smatch complains that:
snd_usb_caiaq_input_init() warn: missing error code 'ret'
This patch adds a new case to handle the situation where the
device does not support any input methods in the
`snd_usb_caiaq_input_init` function. It returns an `-EINVAL` error code
to indicate that no input methods are supported on the device.
Fixes: 523f1dce37 ("[ALSA] Add Native Instrument usb audio device support")
Signed-off-by: Ruliang Lin <u202112092@hust.edu.cn>
Reviewed-by: Dongliang Mu <dzm91@hust.edu.cn>
Acked-by: Daniel Mack <daniel@zonque.org>
Link: https://lore.kernel.org/r/20230504065054.3309-1-u202112092@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 357ad4d898286b94aaae0cb7e3f573459e5b98b9 upstream.
We observed: 'dmasound_setup' defined but not used error with
COMPILER=gcc ARCH=m68k DEFCONFIG=allmodconfig build.
Fix it by adding __maybe_unused to dmasound_setup.
Error(s):
sound/oss/dmasound/dmasound_core.c:1431:12: error: 'dmasound_setup' defined but not used [-Werror=unused-function]
Fixes: 9dd7c46346ca ("sound/oss/dmasound: fix build when drivers are mixed =y/=m")
Signed-off-by: Miles Chen <miles.chen@mediatek.com>
Acked-by: Randy Dunlap <rdunlap@infradead.org>
Link: https://lore.kernel.org/r/20220414091940.2216-1-miles.chen@mediatek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 1c34890273a020d61d6127ade3f68ed1cb21c16a ]
of_node_put() should have been done directly after
mqs_priv->regmap = syscon_node_to_regmap(gpr_np);
otherwise it creates a reference leak on the success path.
To fix this, of_node_put() is moved to the correct location, and change
all the gotos to direct returns.
Fixes: a9d2736714 ("ASoC: fsl_mqs: Fix error handling in probe")
Signed-off-by: Liliang Ye <yll@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20230403152647.17638-1-yll@hust.edu.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39db65a0a17b54915b269d3685f253a4731f344c ]
The driver is able to work fine without relying on a mandatory interrupt
being assigned to the I2C device. This is only needed when making use of
the jack-detect support.
However, the following warning message is always emitted when there is
no such interrupt available:
es8316 0-0011: Failed to get IRQ 0: -22
Do not attempt to request an IRQ if it is not available/valid. This also
ensures the rather misleading message is not displayed anymore.
Also note the IRQ validation relies on commit dab472eb93 ("i2c /
ACPI: Use 0 to indicate that device does not have interrupt assigned").
Fixes: 8222576610 ("ASoC: es8316: Add jack-detect support")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230328094901.50763-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1cf2aa665901054b140eb71748661ceae99b6b5a ]
Use the new IRQF_NO_AUTOEN flag when requesting the IRQ, rather then
disabling it immediately after requesting it.
This fixes a possible race where the IRQ might trigger between requesting
and disabling it; and this also leads to a small code cleanup.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20211003132255.31743-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 39db65a0a17b ("ASoC: es8316: Handle optional IRQ assignment")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 9dd7c46346ca4390f84a7ea9933005eb1b175c15 upstream.
When CONFIG_DMASOUND_ATARI=m and CONFIG_DMASOUND_Q40=y (or vice versa),
dmasound_core.o can be built without dmasound_deinit() being defined,
causing a build error:
ERROR: modpost: "dmasound_deinit" [sound/oss/dmasound/dmasound_atari.ko] undefined!
Modify dmasound_core.c and dmasound.h so that dmasound_deinit() is
always available.
The mixed modes (=y/=m) also mean that several variables and structs
have to be declared in all cases.
Suggested-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Link: lore.kernel.org/r/202204032138.EFT9qGEd-lkp@intel.com
Cc: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Link: https://lore.kernel.org/r/20220405234118.24830-1-rdunlap@infradead.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e38c5e80c3d293a883c6f1d553f2146ec0bda35e ]
The Acer Iconia One 7 B1-750 tablet mostly works fine with the defaults
for an Bay Trail CR tablet. Except for the internal mic, instead of
an analog mic on IN3 a digital mic on DMIC1 is uses.
Add a quirk with these settings for this tablet.
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230322145332.131525-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 86a24e99c97234f87d9f70b528a691150e145197 upstream.
dma_request_slave_channel() may return NULL which will lead to
NULL pointer dereference error in 'tmp_chan->private'.
Correct this behaviour by, first, switching from deprecated function
dma_request_slave_channel() to dma_request_chan(). Secondly, enable
sanity check for the resuling value of dma_request_chan().
Also, fix description that follows the enacted changes and that
concerns the use of dma_request_slave_channel().
Fixes: 706e2c8811 ("ASoC: fsl_asrc_dma: Reuse the dma channel if available in Back-End")
Co-developed-by: Natalia Petrova <n.petrova@fintech.ru>
Signed-off-by: Nikita Zhandarovich <n.zhandarovich@fintech.ru>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230417133242.53339-1-n.zhandarovich@fintech.ru
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f342ac00da1064eb4f94b1f4bcacbdfea955797a upstream.
The BIOS botches this one completely - it says the 2nd S/PDIF output is
used, while in fact it's the 1st one. This is tested on DP45SG, but I'm
assuming it's valid for the other boards in the series as well.
Also add some comments regarding the pins.
FWIW, the codec is apparently still sold by Tempo Semiconductor, Inc.,
where one can download the documentation.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-2-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fb4a624f88f658c7b7ae124452bd42eaa8ac7168 upstream.
Smatch Warns:
sound/firewire/tascam/tascam-stream.c:493 snd_tscm_stream_start_duplex()
warn: missing unwind goto?
The direct return will cause the stream list of "&tscm->domain" unemptied
and the session in "tscm" unfinished if amdtp_domain_start() returns with
an error.
Fix this by changing the direct return to a goto which will empty the
stream list of "&tscm->domain" and finish the session in "tscm".
The snd_tscm_stream_start_duplex() function is called in the prepare
callback of PCM. According to "ALSA Kernel API Documentation", the prepare
callback of PCM will be called many times at each setup. So, if the
"&d->streams" list is not emptied, when the prepare callback is called
next time, snd_tscm_stream_start_duplex() will receive -EBUSY from
amdtp_domain_add_stream() that tries to add an existing stream to the
domain. The error handling code after the "error" label will be executed
in this case, and the "&d->streams" list will be emptied. So not emptying
the "&d->streams" list will not cause an issue. But it is more efficient
and readable to empty it on the first error by changing the direct return
to a goto statement.
The session in "tscm" has been begun before amdtp_domain_start(), so it
needs to be finished when amdtp_domain_start() fails.
Fixes: c281d46a51 ("ALSA: firewire-tascam: support AMDTP domain")
Signed-off-by: Xu Biang <xubiang@hust.edu.cn>
Reviewed-by: Dan Carpenter <error27@gmail.com>
Acked-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230406132801.105108-1-xubiang@hust.edu.cn
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e98e7a82bca2b6dce3e03719cff800ec913f9af7 upstream.
snd_cs8427_iec958_active() would always delete
SNDRV_CTL_ELEM_ACCESS_INACTIVE, even though the function has an
argument `active`.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201219.2197811-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c17f8fd31700392b1bb9e7b66924333568cb3700 upstream.
Like the other boards from the D*45* series, this one sets up the
outputs not quite correctly.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197826-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b09c551c77c7e01dc6e4f3c8bf06b5ffa7b06db5 upstream.
Due to two copy/pastos, closing the MIC or EFX capture device would
make a running ADC capture hang due to unsetting its interrupt handler.
In principle, this would have also allowed dereferencing dangling
pointers, but we're actually rather thorough at disabling and flushing
the ints.
While it may sound like one, this actually wasn't a hypothetical bug:
PortAudio will open a capture stream at startup (and close it right
away) even if not asked to. If the first device is busy, it will just
proceed with the next one ... thus killing a concurrent capture.
Signed-off-by: Oswald Buddenhagen <oswald.buddenhagen@gmx.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230405201220.2197923-1-oswald.buddenhagen@gmx.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fa4e7a6fa12b1132340785e14bd439cbe95b7a5a upstream.
It's been reported that the recent kernel can't probe the PCM devices
on Roland VS-100 properly, and it turned out to be a regression by the
recent addition of the bit shift range check for the format bits.
In the old code, we just did bit-shift and it resulted in zero, which
is then corrected to the standard PCM format, while the new code
explicitly returns an error in such a case.
For addressing the regression, relax the check and fallback to the
standard PCM type (with the info output).
Fixes: 43d5ca88dfcd ("ALSA: usb-audio: Fix potential out-of-bounds shift")
Cc: <stable@vger.kernel.org>
Link: https://bugzilla.kernel.org/show_bug.cgi?id=217084
Link: https://lore.kernel.org/r/20230324075005.19403-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b871cb971c683f7f212e7ca3c9a6709a75785116 upstream.
The recent commit f83bb2592482 ("ALSA: hda/conexant: Add quirk for
LENOVO 20149 Notebook model") introduced a quirk for the device with
17aa:3977, but this caused a regression on another model (Lenovo
Ideadpad U31) with the very same PCI SSID. And, through skimming over
the net, it seems that this PCI SSID is used for multiple different
models, so it's no good idea to apply the quirk with the SSID.
Although we may take a different ID check (e.g. the codec SSID instead
of the PCI SSID), unfortunately, the original patch author couldn't
identify the hardware details any longer as the machine was returned,
and we can't develop the further proper fix.
In this patch, instead, we partially revert the change so that the
quirk won't be applied as default for addressing the regression.
Meanwhile, the quirk function itself is kept, and it's now made to be
applicable via the explicit model=lenovo-20149 option.
Fixes: f83bb2592482 ("ALSA: hda/conexant: Add quirk for LENOVO 20149 Notebook model")
Reported-by: Jetro Jormalainen <jje-lxkl@jetro.fi>
Link: https://lore.kernel.org/r/20230308215009.4d3e58a6@mopti
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230320140954.31154-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e7daaeedb4f270126792ae216f406c1ba2b8f4d9 ]
PCI YMFPCI driver code contains lots of assignments in if condition,
which is a bad coding style that may confuse readers and occasionally
lead to bugs.
This patch is merely for coding-style fixes, no functional changes.
Link: https://lore.kernel.org/r/20210608140540.17885-53-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 6be2e7522eb5 ("ALSA: ymfpci: Fix BUG_ON in probe function")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 98e5eb110095ec77cb6d775051d181edbf9cd3cf ]
tuning_ctl_set() might have buffer overrun at (X) if it didn't break
from loop by matching (A).
static int tuning_ctl_set(...)
{
for (i = 0; i < TUNING_CTLS_COUNT; i++)
(A) if (nid == ca0132_tuning_ctls[i].nid)
break;
snd_hda_power_up(...);
(X) dspio_set_param(..., ca0132_tuning_ctls[i].mid, ...);
snd_hda_power_down(...); ^
return 1;
}
We will get below error by cppcheck
sound/pci/hda/patch_ca0132.c:4229:2: note: After for loop, i has value 12
for (i = 0; i < TUNING_CTLS_COUNT; i++)
^
sound/pci/hda/patch_ca0132.c:4234:43: note: Array index out of bounds
dspio_set_param(codec, ca0132_tuning_ctls[i].mid, 0x20,
^
This patch cares non match case.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87sfe9eap7.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a86e79e3015f5dd8e1b01ccfa49bd5c6e41047a1 upstream.
Samsung Galaxy Book2 Pro (13" 2022 NP930XED-KA1DE) with codec SSID
144d:c868 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 code.
Signed-off-by: Hamidreza H. Fard <nitocris@posteo.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230307163741.3878-1-nitocris@posteo.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ff447886e675979d66b2bc01810035d3baea1b3a ]
CONTROLLER_IN_GPU() is clearly intended to match only Intel devices, but
previously it checked only the PCI Device ID, not the Vendor ID, so it
could match devices from other vendors that happened to use the same Device
ID.
Update CONTROLLER_IN_GPU() so it matches only Intel devices.
Fixes: 535115b5ff ("ALSA: hda - Abort the probe without i915 binding for HSW/B")
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Link: https://lore.kernel.org/r/20230307214054.886721-1-helgaas@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0de2cc3707b6b6e2ad40bd24ce09a5c1f65d01e1 ]
Without gpiolib, this driver fails to link:
arm-linux-gnueabi-ld: sound/soc/codecs/zl38060.o: in function `chip_gpio_get':
zl38060.c:(.text+0x30): undefined reference to `gpiochip_get_data'
arm-linux-gnueabi-ld: sound/soc/codecs/zl38060.o: in function `zl38_spi_probe':
zl38060.c:(.text+0xa18): undefined reference to `devm_gpiochip_add_data_with_key'
This appears to have been in the driver since the start, but is hard to
hit in randconfig testing since gpiolib is almost always selected by something
else.
Fixes: 52e8a94baf ("ASoC: Add initial ZL38060 driver")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230227085850.2503725-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8e70aaae32b72d3088d18a3447b67112b3f5979a ]
The usage of GPIOs is optional in the code so don't force on gpiolib when
building it, avoiding warnings in randconfigs.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220202192333.3655269-6-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 0de2cc3707b6 ("ASoC: zl38060 add gpiolib dependency")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5bfa7277ee7d944421e0ef193586c6e34d7492c ]
The regulators are supposed to be controlled through the
set_bias_level() component callback. Moreover, the regulators are not
enabled during probe and so, this would lead to a regulator unbalanced
use count.
Fixes: ca514c0f12 ("ASOC: Add ADAU7118 8 Channel PDM-to-I2S/TDM Converter driver")
Signed-off-by: Nuno Sá <nuno.sa@analog.com>
Link: https://lore.kernel.org/r/20230224104551.1139981-1-nuno.sa@analog.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 951606a14a8901e3551fe4d8d3cedd73fe954ce1 upstream.
If snd_ctl_add() fails in aureon_add_controls(), it immediately returns
and leaves ice->gpio_mutex locked. ice->gpio_mutex locks in
snd_ice1712_save_gpio_status and unlocks in
snd_ice1712_restore_gpio_status(ice).
It seems that the mutex is required only for aureon_cs8415_get(),
so snd_ice1712_restore_gpio_status(ice) can be placed
just after that. Compile tested only.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Signed-off-by: Dmitry Fomin <fomindmitriyfoma@mail.ru>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230225184322.6286-1-fomindmitriyfoma@mail.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b3bcedc0402fcdc5c8624c433562d9d1882749d8 ]
Walking the dram->cs array was seen as accesses beyond the first array
item by the compiler. Instead, use the array index directly. This allows
for run-time bounds checking under CONFIG_UBSAN_BOUNDS as well. Seen
with GCC 13 with -fstrict-flex-arrays:
../sound/soc/kirkwood/kirkwood-dma.c: In function
'kirkwood_dma_conf_mbus_windows.constprop':
../sound/soc/kirkwood/kirkwood-dma.c:90:24: warning: array subscript 0 is outside array bounds of 'const struct mbus_dram_window[0]' [-Warray-bounds=]
90 | if ((cs->base & 0xffff0000) < (dma & 0xffff0000)) {
| ~~^~~~~~
Cc: Liam Girdwood <lgirdwood@gmail.com>
Cc: Mark Brown <broonie@kernel.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20230127224128.never.410-kees@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 771725efe5e2e5396dd9d1220437e5f9d6b9ca9d ]
When the 'ti,gpio-config' property is not defined, the
device_property_count_u32() will return an error, rather than zero.
The current check, only handles a return value of zero, which assumes that
the property is defined and has nothing defined.
This change extends the check to also check for an error case (most likely
to be hit by the case that the 'ti,gpio-config' is not defined).
In case that the 'ti,gpio-config' and the returned 'gpio_count' is not
correct, there is a 'if (gpio_count != ADCX140_NUM_GPIO_CFGS)' check, a few
lines lower that will return -EINVAL.
This means that someone tried to define 'ti,gpio-config', but with the
wrong number of GPIOs.
Fixes: d521432149 ("ASoC: tlv320adcx140: Add support for configuring GPIO pin")
Signed-off-by: Steffen Aschbacher <steffen.aschbacher@stihl.de>
Signed-off-by: Alexandru Ardelean <alex@shruggie.ro>
Link: https://lore.kernel.org/r/20230213073805.14640-1-alex@shruggie.ro
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 218674a45930c700486d27b765bf2f1b43f8cbf7 ]
Clang warns:
../sound/soc/atmel/mchp-spdifrx.c:455:3: error: variable 'mr' is uninitialized when used here [-Werror,-Wuninitialized]
mr |= SPDIFRX_MR_ENDIAN_BIG;
^~
../sound/soc/atmel/mchp-spdifrx.c:432:8: note: initialize the variable 'mr' to silence this warning
u32 mr;
^
= 0
1 error generated.
Zero initialize mr so that these bitwise OR and assignment operation
works unconditionally.
Fixes: fa09fa60385a ("ASoC: mchp-spdifrx: fix controls which rely on rsr register")
Link: https://github.com/ClangBuiltLinux/linux/issues/1797
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Reviewed-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230202-mchp-spdifrx-fix-uninit-mr-v1-1-629a045d7a2f@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaecdc32b7e35b4f9b457fb3509414aa9a932589 ]
CSC interrupts which might be used in controls are on bits 8 and 9 of
SPDIFRX_IDR register. Thus disable all the interrupts that are exported
by driver.
Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-5-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d3681df44e856aab523a6eb7ba15b5e41efcbb1c ]
Channel status get and channel subcode get controls relies on data
returned by controls when certain IRQs are raised. To achieve that
completions are used b/w controls and interrupt service routine. The
concurrent accesses to these controls are protected by
struct snd_card::controls_rwsem.
Issues identified:
- reinit_completion() may be called while waiting for completion
which should be avoided
- in case of multiple threads waiting, the complete() call in interrupt
will signal only one waiting thread per interrupt which may lead to
timeout for the others
- in case of channel status get as the CSC interrupt is not refcounted
ISR may disable interrupt for threads that were just enabled it.
To solve these the access to controls were protected by a mutex. Along
with this there is no need for spinlock to protect the software cache
reads/updates b/w controls and ISR as the update is happening only when
requested from control, and only one reader can reach the control.
Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-4-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c4161d6eae3ef5f486d1638ef452d9bc1376b0 ]
wait_for_completion_interruptible_timeout() returns 0 in case of
timeout. Check this into account when returning from function.
Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-3-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa09fa60385abbf99342494b280da8b4aebbc0e9 ]
The SPDIFRX block is clocked by 2 clocks: peripheral and generic clocks.
Peripheral clock feeds user interface (registers) and generic clock feeds
the receiver.
To enable the receiver the generic clock needs to be enabled and also the
ENABLE bit of MCHP_SPDIFRX_MR register need to be set.
The signal control exported by mchp-spdifrx driver reports wrong status
when the receiver is disabled. This can happen when requesting the signal
and the capture was not previously started. To solve this the receiver
needs to be enabled (by enabling generic clock and setting ENABLE bit of
MR register) before reading the signal status.
As with this fix there are 2 paths now that need to control the generic
clock and ENABLE bit of SPDIFRX_MR register (one path though controls, one
path though configuration) a mutex has been introduced. We can't rely on
subsystem locking as the controls are protected by
struct snd_card::controls_rwsem semaphore and configuration is protected
by a different lock (embedded in snd_pcm_stream_lock_irq()).
The introduction of mutex is also extended to other controls which rely on
SPDIFRX_RSR.ULOCK bit as it has been discovered experimentally that having
both clocks enabled but not the receiver (through ENABLE bit of SPDIFRX.MR)
leads to inconsistent values of SPDIFRX_RSR.ULOCK. Thus on some controls we
rely on software state (dev->trigger_enabled protected by mutex) to
retrieve proper values.
Fixes: ef265c55c1 ("ASoC: mchp-spdifrx: add driver for SPDIF RX")
Signed-off-by: Claudiu Beznea <claudiu.beznea@microchip.com>
Link: https://lore.kernel.org/r/20230130120647.638049-2-claudiu.beznea@microchip.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ee0fe7fa39b14d1cea455b7041f2df933bd97d2 ]
Although the "dma_chan" pointer occupies more or equal space compared
to "*dma_chan", the allocation size should use the size of variable
itself.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 01ef7dbffb ("ALSA: hda - Update CA0132 codec to load DSP firmware binary")
Signed-off-by: Alexey V. Vissarionov <gremlin@altlinux.org>
Link: https://lore.kernel.org/r/20230117111522.GA15213@altlinux.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a23924b7dd7b748fff8e305e1daf590fed2af21b ]
Initialize is_dsp_mode flag in the beginning of function
fsl_sai_set_dai_fmt_tr().
When the DAIFMT is DAIFMT_DSP_B the first time, is_dsp_mode is
true, then the second time DAIFMT is DAIFMT_I2S, is_dsp_mode
still true, which is a wrong state. So need to initialize
is_dsp_mode flag every time.
Fixes: a3f7dcc9cc ("ASoC: fsl-sai: Add SND_SOC_DAIFMT_DSP_A/B support.")
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Reviewed-by: Iuliana Prodan <iuliana.prodan@nxp.com>
Link: https://lore.kernel.org/r/1673852874-32200-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1f810d2b6b2fbdc5279644d8b2c140b1f7c9d43d upstream.
The HDaudio stream allocation is done first, and in a second step the
LOSIDV parameter is programmed for the multi-link used by a codec.
This leads to a possible stream_tag leak, e.g. if a DisplayAudio link
is not used. This would happen when a non-Intel graphics card is used
and userspace unconditionally uses the Intel Display Audio PCMs without
checking if they are connected to a receiver with jack controls.
We should first check that there is a valid multi-link entry to
configure before allocating a stream_tag. This change aligns the
dma_assign and dma_cleanup phases.
Complements: b0cd60f3e9f5 ("ALSA/ASoC: hda: clarify bus_get_link() and bus_link_get() helpers")
Link: https://github.com/thesofproject/linux/issues/4151
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Link: https://lore.kernel.org/r/20230216162340.19480-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bdccfd290d421b50df4ec6a68d832dad1310748 upstream.
GPIO2 PIN use for output. Mask Dir and Data need to assign for 0x4. Not 0x3.
This fixed was for Lenovo Desktop(0x17aa1056). GPIO2 use for AMP enable.
Signed-off-by: Kailang Yang <kailang@realtek.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/8d02bb9ac8134f878cd08607fdf088fd@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 18d7e16c917a08f08778ecf2b780d63648d5d923 upstream.
The current kernel does not support the SN6180 codec chip.
Add the SN6180 codec configuration item to kernel.
Signed-off-by: Bo Liu <bo.liu@senarytech.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/1675908828-1012-1-git-send-email-bo.liu@senarytech.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e18c6da62edc780e4f4f3c9ce07bdacd69505182 ]
While looking through legacy platform data users, I noticed that
the DT probing never uses data from the DT properties, as the
platform_data structure gets overwritten directly after it
is initialized.
There have never been any boards defining the platform_data in
the mainline kernel either, so this driver so far only worked
with patched kernels or with the default values.
For the benefit of possible downstream users, fix the DT probe
by no longer overwriting the data.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20230126162203.2986339-1-arnd@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 87978e6ad45a16835cc58234451111091be3c59a ]
Several functions that take part in codec's initialization and removal
are re-used by ASoC codec drivers implementations. Drivers mimic the
behavior of hda_codec_driver_probe/remove() found in
sound/pci/hda/hda_bind.c with their component->probe/remove() instead.
One of the reasons for that is the expectation of
snd_hda_codec_device_new() to receive a valid pointer to an instance of
struct snd_card. This expectation can be met only once sound card
components probing commences.
As ASoC sound card may be unbound without codec device being actually
removed from the system, unsetting ->preset in
snd_hda_codec_cleanup_for_unbind() interferes with module unload -> load
scenario causing null-ptr-deref. Preset is assigned only once, during
device/driver matching whereas ASoC codec driver's module reloading may
occur several times throughout the lifetime of an audio stack.
Suggested-by: Takashi Iwai <tiwai@suse.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20230119143235.1159814-1-cezary.rojewski@intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 324f065cdbaba1b879a63bf07e61ca156b789537 ]
The amplifier may provide hardware support for I/V feedback, or
alternatively the firmware may generate an echo reference attached to
the SSP and dailink used for the amplifier.
To avoid any issues with invalid/NULL substreams in the latter case,
always unconditionally set dpcm_capture.
Link: https://github.com/thesofproject/linux/issues/4083
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://lore.kernel.org/r/20230119163459.2235843-2-kai.vehmanen@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5dac9f8dc25fefd9d928b98f6477ff3daefd73e3 ]
This loop accidentally reuses the "i" iterator for both the inside and
the outside loop. The value of MAX_STREAM_BUFFER is 5. I believe that
chip->rmh.stat_len is in the 2-12 range. If the value of .stat_len is
4 or more then it will loop exactly one time, but if it's less then it
is a forever loop.
It looks like it was supposed to combined into one loop where
conditions are checked.
Fixes: 8e6320064c ("ALSA: lx_core: Remove useless #if 0 .. #endif")
Signed-off-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/Y9jnJTis/mRFJAQp@kili
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6a32425f953b955b4ff82f339d01df0b713caa5d upstream.
snd_emux_xg_control() can be called with an argument 'param' greater
than size of 'control' array. It may lead to accessing 'control'
array at a wrong index.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230207132026.2870-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6a28a25d358079b7d0d144689f850aecacf63cba upstream.
Same issue as SP513-54N: Headset microphone does not work without
ALC255_FIXUP_ACER_MIC_NO_PRESENCE fixup.
BugLink: https://bugzilla.kernel.org/show_bug.cgi?id=211853
Cc: <stable@vger.kernel.org>
Signed-off-by: Victor Shyba <victor1984@riseup.net>
Link: https://lore.kernel.org/r/20230123222129.17589-1-victor1984@riseup.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b9cee506da2b7920b5ea02ccd8e78a907d0ee7aa ]
snd_hda_get_connections() can return a negative error code.
It may lead to accessing 'conn' array at a negative index.
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Signed-off-by: Artemii Karasev <karasev@ispras.ru>
Fixes: 30b4503378 ("ALSA: hda - Expose secret DAC-AA connection of some VIA codecs")
Link: https://lore.kernel.org/r/20230119082259.3634-1-karasev@ispras.ru
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 242fc66ae6e1e2b8519daacc7590a73cd0e8a6e4 ]
The fsl-asoc-card AC'97 support currently tries to route to Playback and
Capture widgets provided by the AC'97 CODEC. This doesn't work since the
generic AC'97 driver registers with an "AC97" at the front of the stream
and hence widget names, update to reflect reality. It's not clear to me
if or how this ever worked.
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-2-a5d7469d4f67@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c6a42b5b0ed6f96624f56954e93eeae107440a6 ]
The SSI driver calls the AC'97 playback and transmit streams "AC97 Playback"
and "AC97 Capture" respectively. This is the same name used by the generic
AC'97 CODEC driver in ASoC, creating confusion for the Freescale ASoC card
when it attempts to use these widgets in routing. Add a "CPU" in the name
like the regular DAIs registered by the driver to disambiguate.
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20230106-asoc-udoo-probe-v1-1-a5d7469d4f67@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cdfa92eb90f5770b26a79824ef213ebdbbd988b1 ]
The parameter "max" of SOC_SINGLE_SX_TLV() means the number of steps
rather than maximum value. This patch corrects the minimum value to -8
and the number of steps to 15.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Shengjiu Wang <shengjiu.wang@gmail.com>
Link: https://lore.kernel.org/r/20230104025754.3019235-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f680609bf1beac20e2a31ddcb1b88874123c39f ]
Turn on power early to avoid wrong state for power relation register.
This can earlier update JD state when resume back.
Signed-off-by: Yuchi Yang <yangyuchi66@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/e35d8f4fa18f4448a2315cc7d4a3715f@realtek.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 472a6309c6467af89dbf660a8310369cc9cb041f ]
Restore volume after charge pump and PGA activation to ensure
that volume settings are correctly applied when re-enabling codec
from SND_SOC_BIAS_OFF state.
CLASS_W, CHARGE_PUMP and POWER_MANAGEMENT_2 register configuration
affect how the volume register are applied and must be configured first.
Fixes: a91eb199e4 ("ASoC: Initial WM8904 CODEC driver")
Link: https://lore.kernel.org/all/c7864c35-738c-a867-a6a6-ddf9f98df7e7@gmail.com/
Signed-off-by: Emanuele Ghidoli <emanuele.ghidoli@toradex.com>
Signed-off-by: Francesco Dolcini <francesco.dolcini@toradex.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221223080247.7258-1-francesco@dolcini.it
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 000bca8d706d1bf7cca01af75787247c5a2fdedf upstream.
These indices should reference the ID placed within the dai_driver
array, not the indices of the array itself.
This fixes commit 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD
lines configurable"), which among others, broke IPQ8064 audio
(sound/soc/qcom/lpass-ipq806x.c) because it uses ID 4 but we'd stop
initializing the mi2s_playback_sd_mode and mi2s_capture_sd_mode arrays
at ID 0.
Fixes: 4ff028f6c1 ("ASoC: qcom: lpass-cpu: Make I2S SD lines configurable")
Cc: <stable@vger.kernel.org>
Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Reviewed-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20221231061545.2110253-1-computersforpeace@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ca88eeb308a221c2dcd4a64031d2e5fcd3db9eaa upstream.
The HP Spectre x360 13-aw0xxx devices use the ALC285 codec with GPIO 0x04
controlling the micmute LED and COEF 0x0b index 8 controlling the mute LED.
A quirk was added to make these work as well as a fixup.
Signed-off-by: Luka Guzenko <l.guzenko@web.de>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230110202514.2792-1-l.guzenko@web.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5751933a7f6abbdad90d98f25a25bb4b133a9e6 upstream.
There is another Dell Latitude laptop (1028:0c03) with Realtek
codec ALC3254 which needs the ALC269_FIXUP_DELL4_MIC_NO_PRESENCE
instead of the default matched ALC269_FIXUP_DELL1_MIC_NO_PRESENCE.
Apply correct fixup for this particular model to enable headset mic.
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230103095332.730677-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de1ccb9e61728dd941fe0e955a7a129418657267 upstream.
Add the 'HP Engage Flex Mini' device to the force connect list to
enable audio through HDMI.
Signed-off-by: Adrian Chan <adchan@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230109210520.16060-1-adchan@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Note: this is a fix that works around the bug equivalently as the
two upstream commits:
1fa4445f9adf ("ALSA: control - introduce snd_ctl_notify_one() helper")
56b88b50565c ("ALSA: pcm: Move rwsem lock inside snd_ctl_elem_read to prevent UAF")
but in a simpler way to fit with older stable trees -- tiwai ]
Add missing locking in ctl_elem_read_user/ctl_elem_write_user which can be
easily triggered and turned into an use-after-free.
Example code paths with SNDRV_CTL_IOCTL_ELEM_READ:
64-bits:
snd_ctl_ioctl
snd_ctl_elem_read_user
[takes controls_rwsem]
snd_ctl_elem_read [lock properly held, all good]
[drops controls_rwsem]
32-bits (compat):
snd_ctl_ioctl_compat
snd_ctl_elem_write_read_compat
ctl_elem_write_read
snd_ctl_elem_read [missing lock, not good]
CVE-2023-0266 was assigned for this issue.
Signed-off-by: Clement Lecigne <clecigne@google.com>
Cc: stable@kernel.org # 5.12 and older
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a1dec9d70b6ad97087b60b81d2492134a84208c6 ]
The Advantech MICA-071 tablet deviates from the defaults for
a non CR Bay Trail based tablet in several ways:
1. It uses an analog MIC on IN3 rather then using DMIC1
2. It only has 1 speaker
3. It needs the OVCD current threshold to be set to 1500uA instead of
the default 2000uA to reliable differentiate between headphones vs
headsets
Add a quirk with these settings for this tablet.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221213123246.11226-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8b3a9ad86239f80ed569e23c3954a311f66481d6 upstream.
On the JZ4740, there is a single bit that flushes (empties) both
the transmit and receive FIFO. Later SoCs have independent flush
bits for each FIFO.
Independent FIFOs can be flushed before the snd_soc_dai_active()
check because it won't disturb other active streams. This ensures
that the FIFO we're about to use is always flushed before starting
up. With shared FIFOs we can't do that because if another substream
is active, flushing its FIFO would cause underrun errors.
This also fixes a bug: since we were only setting the JZ4740's
flush bit, which corresponds to the TX FIFO flush bit on other
SoCs, other SoCs were not having their RX FIFO flushed at all.
Fixes: 967beb2e87 ("ASoC: jz4740: Add jz4780 support")
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Cc: stable@vger.kernel.org
Signed-off-by: Aidan MacDonald <aidanmacdonald.0x0@gmail.com>
Link: https://lore.kernel.org/r/20221023143328.160866-2-aidanmacdonald.0x0@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a4517c4f3423c7c448f2c359218f97c1173523a1 ]
The Dell Latiture 3340/3440/3540 laptops with Realtek ALC3204 have
dual codecs and need the ALC1220_FIXUP_GB_DUAL_CODECS to fix the
conflicts of Master controls. The existing headset mic fixup for
Dell is also required to enable the jack sense and the headset mic.
Introduce a new fixup to fix the dual codec and headset mic issues
for particular Dell laptops since other old Dell laptops with the
same codec configuration are already well handled by the fixup in
alc269_fallback_pin_fixup_tbl[].
Signed-off-by: Chris Chiu <chris.chiu@canonical.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221226114303.4027500-1-chris.chiu@canonical.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2912cdda734d9136615ed05636d9fcbca2a7a3c5 ]
The Dell Inspiron Plus 16, in both laptop and 2in1 form factor, has top
speakers connected on NID 0x17, which the codec reports as unconnected.
These speakers should be connected to the DAC on NID 0x03.
Signed-off-by: Philipp Jungkamp <p.jungkamp@gmx.net>
Link: https://lore.kernel.org/r/20221205163713.7476-1-p.jungkamp@gmx.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: a4517c4f3423 ("ALSA: hda/realtek: Apply dual codec fixup for Dell Latitude laptops")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e8444560b4d9302a511f0996f4cfdf85b628f4ca upstream.
The HDAudio ASoC support relies on the set_tdm_slots() helper to store
the HDaudio stream tag in the tx_mask. This only works because of the
pre-existing order in soc-pcm.c, where the hw_params() is handled for
codec_dais *before* cpu_dais. When the order is reversed, the
stream_tag is used as a mask in the codec fixup functions:
/* fixup params based on TDM slot masks */
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
codec_dai->tx_mask)
soc_pcm_codec_params_fixup(&codec_params,
codec_dai->tx_mask);
As a result of this confusion, the codec_params_fixup() ends-up
generating bad channel masks, depending on what stream_tag was
allocated.
We could add a flag to state that the tx_mask is really not a mask,
but it would be quite ugly to persist in overloading concepts.
Instead, this patch suggests a more generic get/set 'stream' API based
on the existing model for SoundWire. We can expand the concept to
store 'stream' opaque information that is specific to different DAI
types. In the case of HDAudio DAIs, we only need to store a stream tag
as an unsigned char pointer. The TDM rx_ and tx_masks should really
only be used to store masks.
Rename get_sdw_stream/set_sdw_stream callbacks and helpers as
get_stream/set_stream. No functionality change beyond the rename.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Acked-By: Vinod Koul <vkoul@kernel.org>
Link: https://lore.kernel.org/r/20211224021034.26635-5-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 636110411ca726f19ef8e87b0be51bb9a4cdef06 upstream.
Overloading the tx_mask with a linear value is asking for trouble and
only works because the codec_dai hw_params() is called before the
cpu_dai hw_params().
Move to the more generic set_stream() API to pass the hdac_stream
information.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20211224021034.26635-6-yung-chuan.liao@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Cc: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b8800d324abb50160560c636bfafe2c81001b66c upstream.
Correctly calculate available space including the size of the chunk
buffer. This fixes a buffer overflow when multiple MIDI sysex
messages are sent to a PODxt device.
Signed-off-by: Artem Egorkine <arteme@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221225105728.1153989-2-arteme@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8508fa2e7472f673edbeedf1b1d2b7a6bb898ecc upstream.
A PODxt device sends 0xb2, 0xc2 or 0xf2 as a status byte for MIDI
messages over USB that should otherwise have a 0xb0, 0xc0 or 0xf0
status byte. This is usually corrected by the driver on other OSes.
This fixes MIDI sysex messages sent by PODxt.
[ tiwai: fixed white spaces ]
Signed-off-by: Artem Egorkine <arteme@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221225105728.1153989-1-arteme@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31b573946ea55e1ea0e08ae8e83bcf879b30f83a upstream.
HDMI audio is not working on the HP EliteDesk 800 G6 because the pin is
unconnected. This issue can be resolved by using the 'hdajackretask'
tool to override the unconnected pin to force it to connect.
Signed-off-by: Jiao Zhou <jiaozhou@google.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221206185311.3669950-1-jiaozhou@google.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 696b66ac26ef953aed5783ef26a252ec8f207013 upstream.
Add relevant information to the quirks-table.h file.
The test passes and the sound source file plays normally.
Signed-off-by: wangdicheng <wangdicheng@kylinos.cn>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/SG2PR02MB587849631CB96809CF90DBED8A1A9@SG2PR02MB5878.apcprd02.prod.outlook.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 6c900dcc3f7331a67ed29739d74524e428d137fb ]
For some reason rt5670_i2c_probe() does a pm_runtime_put() at the end
of a successful probe. But it has never done a pm_runtime_get() leading
to the following error being logged into dmesg:
rt5670 i2c-10EC5640:00: Runtime PM usage count underflow!
Fix this by removing the unnecessary pm_runtime_put().
Fixes: 64e89e5f55 ("ASoC: rt5670: Add runtime PM support")
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20221213123319.11285-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6d94d0090527b1763872275a7ccd44df7219b31e ]
rk_spdif_runtime_resume() may have called clk_prepare_enable() before return
from failed branches, add missing clk_disable_unprepare() in this case.
Fixes: f874b80e15 ("ASoC: rockchip: Add rockchip SPDIF transceiver driver")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Link: https://lore.kernel.org/r/20221208063900.4180790-1-wangjingjin1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9529dc167ffcdfd201b9f0eda71015f174095f7e ]
Fix this by dropping wm8994->accdet_lock while calling
cancel_delayed_work_sync(&wm8994->mic_work) in wm1811_jackdet_irq().
Fixes: c0cc3f1665 ("ASoC: wm8994: Allow a delay between jack insertion and microphone detect")
Signed-off-by: Marek Szyprowski <m.szyprowski@samsung.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221209091657.1183-1-m.szyprowski@samsung.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef0a098efb36660326c133af9b5a04a96a00e3ca ]
The clk_disable_unprepare() should be called in the error handling of
rockchip_pdm_runtime_resume().
Fixes: fc05a5b222 ("ASoC: rockchip: add support for pdm controller")
Signed-off-by: Wang Jingjin <wangjingjin1@huawei.com>
Link: https://lore.kernel.org/r/20221205032802.2422983-1-wangjingjin1@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ab2d12c726f0fde0692fa5d81d8019b3dcd62d0 ]
The of_get_next_child() returns a node with refcount incremented, and
decrements the refcount of prev. So in the error path of the while loop,
of_node_put() needs be called for cpu_ep.
Fixes: fce9b90c1a ("ASoC: audio-graph-card: cleanup DAI link loop method - step2")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Acked-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/1670228127-13835-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3327d721114c109ba0575f86f8fda3b525404054 ]
The node returned by of_parse_phandle() with refcount incremented,
of_node_put() needs be called when finish using it. So add it in the
error path in mt8173_rt5650_rt5514_dev_probe().
Fixes: 0d1d7a6642 ("ASoC: mediatek: Refine mt8173 driver and change config option")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1670234664-24246-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 171107237246d66bce04f3769d33648f896b4ce3 ]
AudioDSP cores and HDAudio links need to be turned off on shutdown to
ensure no communication or data transfer occurs during the procedure.
Fixes: c5a76a2469 ("ASoC: Intel: Skylake: Add shutdown callback")
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Tested-by: Lukasz Majczak <lma@semihlaf.com>
Link: https://lore.kernel.org/r/20221205085330.857665-6-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 12054f0ce8be7d2003ec068ab27c9eb608397b98 ]
snd_hdac_ext_stop_streams() has really nothing to do with the
extension, it just loops over the bus streams.
Move it to the hdac_stream layer and rename to remove the 'ext'
prefix and add the precision that the chip will also be stopped.
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@intel.com>
Reviewed-by: Péter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Ranjani Sridharan <ranjani.sridharan@linux.intel.com>
Reviewed-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20211216231128.344321-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Stable-dep-of: 171107237246 ("ASoC: Intel: Skylake: Fix driver hang during shutdown")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 953dbd1cef18ce9ac0d69c1bd735b929fe52a17e ]
KBL-R RVP platforms also use combojack, so we need to enable that
configuration for them.
Signed-off-by: Amadeusz Sławiński <amadeuszx.slawinski@linux.intel.com>
Signed-off-by: Cezary Rojewski <cezary.rojewski@intel.com>
Link: https://lore.kernel.org/r/20221010121955.718168-4-cezary.rojewski@intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cf2ea3c86ad90d63d1c572b43e1ca9276b0357ad ]
I got a null-ptr-defer error report when I do the following tests
on the qemu platform:
make defconfig and CONFIG_PARPORT=m, CONFIG_PARPORT_PC=m,
CONFIG_SND_MTS64=m
Then making test scripts:
cat>test_mod1.sh<<EOF
modprobe snd-mts64
modprobe snd-mts64
EOF
Executing the script, perhaps several times, we will get a null-ptr-defer
report, as follow:
syzkaller:~# ./test_mod.sh
snd_mts64: probe of snd_mts64.0 failed with error -5
modprobe: ERROR: could not insert 'snd_mts64': No such device
BUG: kernel NULL pointer dereference, address: 0000000000000000
#PF: supervisor write access in kernel mode
#PF: error_code(0x0002) - not-present page
PGD 0 P4D 0
Oops: 0002 [#1] PREEMPT SMP PTI
CPU: 0 PID: 205 Comm: modprobe Not tainted 6.1.0-rc8-00588-g76dcd734eca2 #6
Call Trace:
<IRQ>
snd_mts64_interrupt+0x24/0xa0 [snd_mts64]
parport_irq_handler+0x37/0x50 [parport]
__handle_irq_event_percpu+0x39/0x190
handle_irq_event_percpu+0xa/0x30
handle_irq_event+0x2f/0x50
handle_edge_irq+0x99/0x1b0
__common_interrupt+0x5d/0x100
common_interrupt+0xa0/0xc0
</IRQ>
<TASK>
asm_common_interrupt+0x22/0x40
RIP: 0010:_raw_write_unlock_irqrestore+0x11/0x30
parport_claim+0xbd/0x230 [parport]
snd_mts64_probe+0x14a/0x465 [snd_mts64]
platform_probe+0x3f/0xa0
really_probe+0x129/0x2c0
__driver_probe_device+0x6d/0xc0
driver_probe_device+0x1a/0xa0
__device_attach_driver+0x7a/0xb0
bus_for_each_drv+0x62/0xb0
__device_attach+0xe4/0x180
bus_probe_device+0x82/0xa0
device_add+0x550/0x920
platform_device_add+0x106/0x220
snd_mts64_attach+0x2e/0x80 [snd_mts64]
port_check+0x14/0x20 [parport]
bus_for_each_dev+0x6e/0xc0
__parport_register_driver+0x7c/0xb0 [parport]
snd_mts64_module_init+0x31/0x1000 [snd_mts64]
do_one_initcall+0x3c/0x1f0
do_init_module+0x46/0x1c6
load_module+0x1d8d/0x1e10
__do_sys_finit_module+0xa2/0xf0
do_syscall_64+0x37/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
</TASK>
Kernel panic - not syncing: Fatal exception in interrupt
Rebooting in 1 seconds..
The mts wa not initialized during interrupt, we add check for
mts to fix this bug.
Fixes: 68ab801e32 ("[ALSA] Add snd-mts64 driver for ESI Miditerminal 4140")
Signed-off-by: Gaosheng Cui <cuigaosheng1@huawei.com>
Link: https://lore.kernel.org/r/20221206061004.1222966-1-cuigaosheng1@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5c8cc93b06d1ff860327a273abf3ac006290d242 ]
When a PCM trigger-start fails at snd_pcm_do_start(), PCM core tries
to undo the action at snd_pcm_undo_start() by issuing the trigger STOP
manually. At that point, we forgot to set the stop_operating flag,
hence the sync-stop won't be issued at the next prepare or other
calls.
This patch adds the missing stop_operating flag at
snd_pcm_undo_start().
Fixes: 1e850beea2 ("ALSA: pcm: Add the support for sync-stop operation")
Link: https://lore.kernel.org/r/b4e71631-4a94-613-27b2-fb595792630@carlh.net
Link: https://lore.kernel.org/r/20221205132124.11585-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97b801be6f8e53676b9f2b105f54e35c745c1b22 ]
The pm_runtime_enable will increase power disable depth. Thus
a pairing decrement is needed on the error handling path to
keep it balanced according to context. We fix it by going to
err_pm instead of err_clk.
Fixes:f086ba9d5389c ("ASoC: pcm512x: Support mastering BCLK/LRCLK using the PLL")
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Link: https://lore.kernel.org/r/20220928160402.126140-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbb264d4e9136acab2c8fd39e39ab1b1402b84b ]
If the device does not come straight from reset, we might receive an IRQ
before we are ready to handle it.
Fixes:
[ 2.334737] Unable to handle kernel read from unreadable memory at virtual address 00000000000001e4
[ 2.522601] Call trace:
[ 2.525040] regmap_read+0x1c/0x80
[ 2.528434] mt8173_afe_irq_handler+0x40/0xf0
...
[ 2.598921] start_kernel+0x338/0x42c
Signed-off-by: Ricardo Ribalda <ribalda@chromium.org>
Fixes: ee0bcaff10 ("ASoC: mediatek: Add AFE platform driver")
Link: https://lore.kernel.org/r/20221128-mt8173-afe-v1-0-70728221628f@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c32984bc7da29828260ac514d5d4967f7e8f62d ]
When registering the mt8173-afe-pcm driver, we are also adding two
components: one is for the PCM DAIs and one is for the HDMI DAIs, but
when debugfs is enabled, we're getting the following issue:
[ 17.279176] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
[ 17.288345] debugfs: Directory '11220000.audio-controller' with parent 'mtk-rt5650' already present!
To overcome to that without any potentially big rewrite of this driver,
similarly to what was done in mt8195-afe-pcm, add a debugfs_prefix to
the components before actually adding them.
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20211111161108.502344-1-angelogioacchino.delregno@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Stable-dep-of: 4cbb264d4e91 ("ASoC: mediatek: mt8173: Enable IRQ when pdata is ready")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9d86515c3d4c0564a0c31a2df87d735353a1971e ]
pci_disable_device() need be called while module exiting, switch to use
pcim_enable(), pci_disable_device() will be called in pcim_release().
Fixes: 3285ea10e9 ("ALSA: asihpi - Interrelated HPI tidy up.")
Signed-off-by: Liu Shixin <liushixin2@huawei.com>
Link: https://lore.kernel.org/r/20221126021429.3029562-1-liushixin2@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d067b3378a78c9c3048ac535e31c171b6f5b5846 ]
As the mtk_btcvsd_snd_write and mtk_btcvsd_snd_read may return error,
it should be better to catch the exception.
Fixes: 4bd8597dc3 ("ASoC: mediatek: add btcvsd driver")
Signed-off-by: Jiasheng Jiang <jiasheng@iscas.ac.cn>
Link: https://lore.kernel.org/r/20221116030750.40500-1-jiasheng@iscas.ac.cn
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bf5ee979076ceb121ee51c95197d890b1cee7f4 ]
As the devm_kcalloc may return NULL, the return value needs to be checked
to avoid NULL poineter dereference.
Fixes: 24caf8d9eb ("ASoC: qcom: lpass-sc7180: Add platform driver for lpass audio")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221124140510.63468-1-yuancan@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit f33bcc506050f89433a52a3052054d4ebd37b1c1 upstream.
Currently the check against the max value for the control is being
applied after the value has had the minimum applied and been masked. But
the max value simply indicates the number of volume levels on an SX
control, and as such should just be applied on the raw value.
Fixes: 97eea946b939 ("ASoC: ops: Check bounds for second channel in snd_soc_put_volsw_sx()")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-1-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3d1bb6cc1a654c8693a85b1d262e610196edec8b ]
The table in the datasheet actually shows the volume values in the wrong
order, with the two -3dB values being reversed. This appears to have
caused the lower of the two values to be used in the driver when the
higher should have been, correct this mixup.
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221125162348.1288005-2-ckeepax@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97eea946b93961fffd29448dcda7398d0d51c4b2 ]
The bounds checks in snd_soc_put_volsw_sx() are only being applied to the
first channel, meaning it is possible to write out of bounds values to the
second channel in stereo controls. Add appropriate checks.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220511134137.169575-2-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b776c4a4618ec1b5219d494c423dc142f23c4e8f ]
There may be failure when start 1 channel recording after
8 channels recording. The reason is that the CHnF
flags are not cleared successfully by software reset.
This issue is triggerred by the change of clearing
software reset bit.
CHnF flags are write 1 clear bits. Clear them by force
write.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1651925654-32060-2-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 292709b9cf3ba470af94b62c9bb60284cc581b79 ]
SRES is self-cleared bit, but REG_MICFIL_CTRL1 is defined as
non volatile register, it still remain in regmap cache after set,
then every update of REG_MICFIL_CTRL1, software reset happens.
to avoid this, clear it explicitly.
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://lore.kernel.org/r/1651925654-32060-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 05530ef7cf7c7d700f6753f058999b1b5099a026 ]
With clang's kernel control flow integrity (kCFI, CONFIG_CFI_CLANG),
indirect call targets are validated against the expected function
pointer prototype to make sure the call target is valid to help mitigate
ROP attacks. If they are not identical, there is a failure at run time,
which manifests as either a kernel panic or thread getting killed.
seq_copy_in_user() and seq_copy_in_kernel() did not have prototypes
matching snd_seq_dump_func_t. Adjust this and remove the casts. There
are not resulting binary output differences.
This was found as a result of Clang's new -Wcast-function-type-strict
flag, which is more sensitive than the simpler -Wcast-function-type,
which only checks for type width mismatches.
Reported-by: kernel test robot <lkp@intel.com>
Link: https://lore.kernel.org/lkml/202211041527.HD8TLSE1-lkp@intel.com
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Takashi Iwai <tiwai@suse.com>
Cc: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Cc: alsa-devel@alsa-project.org
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20221118232346.never.380-kees@kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3ca507bf99611c82dafced73e921c1b10ee12869 ]
DSPCLK_DIV field in WM8962_CLOCKING1 register is used to generate
correct frequency of LRCLK and BCLK. Sometimes the read-only value
can't be updated timely after enabling SYSCLK. This results in wrong
calculation values. Delay is introduced here to wait for newest value
from register. The time of the delay should be at least 500~1000us
according to test.
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221109121354.123958-1-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 698813ba8c580efb356ace8dbf55f61dac6063a8 ]
For _sx controls the semantics of the max field is not the usual one, max
is the number of steps rather than the maximum value. This means that our
check in snd_soc_put_volsw_sx() needs to just check against the maximum
value.
Fixes: 4f1e50d6a9cf9c1b ("ASoC: ops: Reject out of bounds values in snd_soc_put_volsw_sx()")
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20220511134137.169575-1-broonie@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8bb0ac0e6f64ebdf15d963c26b028de391c9bcf9 ]
The Nanote UMPC-01 mini laptop has stereo speakers, while the default
bytcht_es8316 settings assume a mono speaker setup. Add a quirk for this.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Acked-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20221025140942.509066-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39bd801d6908900e9ab0cdc2655150f95ddd4f1a ]
The DAI tx_mask and rx_mask are set by snd_soc_dai_set_tdm_slot()
and used by later code that depends on the TDM settings. So
__soc_pcm_open() should not be obliterating those mask values.
The code in __soc_pcm_hw_params() uses these masks to calculate the
active channels so that only the AIF_IN/AIF_OUT widgets for the
active TDM slots are enabled. The zeroing of the masks in
__soc_pcm_open() disables this functionality so all AIF widgets
were enabled even for channels that are not assigned to a TDM slot.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2e5894d737 ("ASoC: pcm: Add support for DAI multicodec")
Link: https://lore.kernel.org/r/20221104132213.121847-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0bb8e9b36b5b7f2e77892981ff6c27ee831d8026 ]
Since commit bf2aebccddef ("ASoC: sgtl5000: Fix noise on shutdown/remove"),
the device power control registers are reset when the driver is
removed/shutdown.
This is an issue when the device is configured to use the PLL clock. The
device will stop responding if it is still configured to use the PLL
clock but the PLL clock is powered down.
When rebooting linux, the probe function will show:
sgtl5000 0-000a: Error reading chip id -11
Make sure that the CHIP_CLK_CTRL is reset to its default value before
powering down the device.
Fixes: bf2aebccddef ("ASoC: sgtl5000: Fix noise on shutdown/remove")
Signed-off-by: Detlev Casanova <detlev.casanova@collabora.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Link: https://lore.kernel.org/r/20221110190612.1341469-1-detlev.casanova@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1abfd71ee8f3ed99c5d0df5d9843a360541d6808 upstream.
Samsung Galaxy Book Pro 360 (13" 2021 NP930QBD-ke1US) with codec SSID
144d:c1a6 requires the same workaround for enabling the speaker amp
like other Samsung models with ALC298 codec.
Link: https://bugzilla.opensuse.org/show_bug.cgi?id=1205100
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221115170235.18875-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b18a456330e1c1ca207b57b45872f10336741388 upstream.
The Samsung Galaxy Book Pro seems to have the same issue as a few
other Samsung laptops, detailed in kernel bug report 207423. Sound from
headphone jack works, but not the built-in speakers.
alsa-info: http://alsa-project.org/db/?f=b40ba609dc6ae28dc84ad404a0d8a4bbcd8bea6d
Signed-off-by: Emil Flink <emil.flink@gmail.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221115144500.7782-1-emil.flink@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad72c3c3f6eb81d2cb189ec71e888316adada5df upstream.
snd_usbmidi_output_open() has a check of the NULL port with
snd_BUG_ON(). snd_BUG_ON() was used as this shouldn't have happened,
but in reality, the NULL port may be seen when the device gives an
invalid endpoint setup at the descriptor, hence the driver skips the
allocation. That is, the check itself is valid and snd_BUG_ON()
should be dropped from there. Otherwise it's confusing as if it were
a real bug, as recently syzbot stumbled on it.
Reported-by: syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/syzbot+9abda841d636d86c41da@syzkaller.appspotmail.com
Link: https://lore.kernel.org/r/20221112141223.6144-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 314d34fe7f0a5836cb0472950c1f17744b4efde8 ]
snd_soc_util_exit() is called in __init snd_soc_init() for cleanup.
Remove the __exit annotation for it to fix the build warning:
WARNING: modpost: sound/soc/snd-soc-core.o: section mismatch in reference: init_module (section: .init.text) -> snd_soc_util_exit (section: .exit.text)
Fixes: 6ec27c53886c ("ASoC: core: Fix use-after-free in snd_soc_exit()")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221031134031.256511-1-chenzhongjin@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit faac764ea1ea6898d93e46c403271fb105c0906e ]
There's a special branch in the set_tdm_slot op for the case of nslots
being 1, but:
(1) That branch can never work (there's a check for tx_mask being
non-zero, later there's another check for it *being* zero; one or
the other always throws -EINVAL).
(2) The intention of the branch seems to be what the general other
branch reduces to in case of nslots being 1.
For those reasons remove the 'nslots being 1' special case.
Fixes: 827ed8a0fa ("ASoC: tas2764: Add the driver for the TAS2764")
Suggested-by: Jos Dehaes <jos.dehaes@gmail.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221027095800.16094-2-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e59bf547a7dd366f93bfebb7487959580ca6c0ec ]
There's a special branch in the set_tdm_slot op for the case of nslots
being 1, but:
(1) That branch can never work (there's a check for tx_mask being
non-zero, later there's another check for it *being* zero; one or
the other always throws -EINVAL).
(2) The intention of the branch seems to be what the general other
branch reduces to in case of nslots being 1.
For those reasons remove the 'nslots being 1' special case.
Fixes: 1a476abc72 ("tas2770: add tas2770 smart PA kernel driver")
Suggested-by: Jos Dehaes <jos.dehaes@gmail.com>
Signed-off-by: Martin Povišer <povik+lin@cutebit.org>
Link: https://lore.kernel.org/r/20221027095800.16094-1-povik+lin@cutebit.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6ec27c53886c8963729885bcf2dd996eba2767a7 ]
KASAN reports a use-after-free:
BUG: KASAN: use-after-free in device_del+0xb5b/0xc60
Read of size 8 at addr ffff888008655050 by task rmmod/387
CPU: 2 PID: 387 Comm: rmmod
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996)
Call Trace:
<TASK>
dump_stack_lvl+0x79/0x9a
print_report+0x17f/0x47b
kasan_report+0xbb/0xf0
device_del+0xb5b/0xc60
platform_device_del.part.0+0x24/0x200
platform_device_unregister+0x2e/0x40
snd_soc_exit+0xa/0x22 [snd_soc_core]
__do_sys_delete_module.constprop.0+0x34f/0x5b0
do_syscall_64+0x3a/0x90
entry_SYSCALL_64_after_hwframe+0x63/0xcd
...
</TASK>
It's bacause in snd_soc_init(), snd_soc_util_init() is possble to fail,
but its ret is ignored, which makes soc_dummy_dev unregistered twice.
snd_soc_init()
snd_soc_util_init()
platform_device_register_simple(soc_dummy_dev)
platform_driver_register() # fail
platform_device_unregister(soc_dummy_dev)
platform_driver_register() # success
...
snd_soc_exit()
snd_soc_util_exit()
# soc_dummy_dev will be unregistered for second time
To fix it, handle error and stop snd_soc_init() when util_init() fail.
Also clean debugfs when util_init() or driver_register() fail.
Fixes: fb257897bf ("ASoC: Work around allmodconfig failure")
Signed-off-by: Chen Zhongjin <chenzhongjin@huawei.com>
Link: https://lore.kernel.org/r/20221028031603.59416-1-chenzhongjin@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 91502a9a0b0d5252cf3f32ebd898823c2f5aadab ]
There are several PCI ids associated with HP EliteBook 855 G8 Notebook
PC. Commit 0e68c4b11f1e6 ("ALSA: hda/realtek: fix mute/micmute LEDs for
HP 855 G8") covers 0x103c:0x8896, while this commit covers 0x103c:0x8895
which needs some additional work on top of the quirk from 0e68c4b11f1e6.
Note that the device can boot up with working speakers and micmute LED
without this patch, but the success rate would be quite low (order of
16 working boots across 709 boots) at least for the built-in drivers
scenario. This also means that there are some timing issues during early
boot and this patch is a workaround.
With this patch applied speakers and headphones are consistenly working,
as well as mute/micmute LEDs and the internal microphone.
Signed-off-by: Alexander Sergeyev <sergeev917@gmail.com>
Link: https://lore.kernel.org/r/20220114165050.ouw2nknuspclynro@localhost.localdomain
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit df496157a5afa1b6d1f4c46ad6549c2c346d1e59 ]
There are two spelling mistakes in codec routing description. Fix it.
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org>
Acked-by: Paul Cercueil <paul@crapouillou.net>
Link: https://lore.kernel.org/r/20221019071639.1003730-1-colin.i.king@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 75d8b1662ca5c20cf8365575222abaef18ff1f50 ]
The driver missed the default value of register 0xc070/0xc360.
This patch adds that default value to avoid invalid register access
when the device doesn't be enumerated yet.
BugLink: https://github.com/thesofproject/linux/issues/3924
Signed-off-by: Shuming Fan <shumingf@realtek.com>
Link: https://lore.kernel.org/r/20221019095715.31082-1-shumingf@realtek.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 80852f8268769715db335a22305e81a0c4a38a84 ]
At the moment Capture source selector appears on Playback
tab in the alsamixer and has a senseless name.
Let's fix that.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-5-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1538e2c8c9b7e7a656effcc6e4e7cfe8c1b405fd ]
Line In Bypass control is used as Master Capture at the moment
this is completely incorrect.
Current control routed to Mixer instead of ADC, thus can't affect
Capture path. ADC control shall be used instead.
ADC volume control parameters are different, so the patch fixes that
as well. Manual says (16.6.3.2 Programmable input attenuation amplifier:
PGATM) that gain varies in range 0dB..22.5dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-4-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 088777bf65b98cfa4b5378119d0a7d49a58ece44 ]
DAC volume control is the Master Playback Volume at the moment
and it reports wrong levels in alsamixer and other alsa apps.
The patch fixes that, as stated in manual on the jz4725b SoC
(16.6.3.4 Programmable attenuation: GOD) the ctl range varies
from -22.5dB to 0dB with 1.5dB step.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-3-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1013999b431b4bcdc1f5ae47dd3338122751db31 ]
Line In path stayed powered off during capturing or
bypass to mixer.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221016132648.3011729-2-lis8215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ee1aa2ae3eaa96e70229fa61deee87ef4528ffdf ]
In wm8962 driver, the WM8962_ADDITIONAL_CONTROL_4 is used as a volatile
register, but this register mixes a bunch of volatile status bits and a
bunch of non-volatile control bits. The dapm widgets TEMP_HP and
TEMP_SPK leverages the control bits in this register. After the wm8962
probe, the regmap will bet set to cache only mode, then a read error
like below would be triggered when trying to read the initial power
state of the dapm widgets TEMP_HP and TEMP_SPK.
wm8962 0-001a: ASoC: error at soc_component_read_no_lock
on wm8962.0-001a: -16
In order to fix this issue, we add event handler to actually power
up/down these widgets. With this change, we also need to explicitly
power off these widgets in the wm8962 probe since they are enabled
by default.
Signed-off-by: Xiaolei Wang <xiaolei.wang@windriver.com>
Tested-by: Adam Ford <aford173@gmail.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221010092014.2229246-1-xiaolei.wang@windriver.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4ab29b0f3a6f1e167c5a627f7cd036c1d2b7d65 ]
It would be better to keep the pm_runtime enables before the
IRQ and component stuff. Both of those could start triggering
PM runtime events.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://lore.kernel.org/r/20221008140522.134912-1-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 68ce83e3bb26feba0fcdd59667fde942b3a600a1 ]
This reverts commit 41a736ac20602f64773e80f0f5b32cde1830a44a.
The pm_runtime_disable is redundant when error returns in
wm8997_probe, we just revert the old patch to fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221010114852.88127-4-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d4e966f4cd73ff69bf06934e8e14a33fb7ef447 ]
This reverts commit 86b46bf1feb83898d89a2b4a8d08d21e9ea277a7.
The pm_runtime_disable is redundant when error returns in
wm5110_probe, we just revert the old patch to fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221010114852.88127-3-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit de71d7567e358effd06dfc3e2a154b25f1331c10 ]
This reverts commit fcbb60820cd3008bb44334a0395e5e57ccb77329.
The pm_runtime_disable is redundant when error returns in
wm5102_probe, we just revert the old patch to fix it.
Signed-off-by: Zhang Qilong <zhangqilong3@huawei.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Link: https://lore.kernel.org/r/20221010114852.88127-2-zhangqilong3@huawei.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8cbd4725ffff3eface1f5f3397af02acad5b2831 upstream.
Accuphase DAC-60 option card supports native DSD up to DSD256,
but doesn't have support for auto-detection. Explicitly enable
DSD support for the correct altsetting.
Signed-off-by: Jussi Laako <jussi@sonarnerd.net>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108221241.1220878-1-jussi@sonarnerd.net
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9a5523f72bd2b0d66eef3d58810c6eb7b5ffc143 upstream.
As 'kobject_add' may allocated memory for 'kobject->name' when return error.
And in this function, if call 'kobject_add' failed didn't free kobject.
So call 'kobject_put' to recycling resources.
Signed-off-by: Ye Bin <yebin10@huawei.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221110144539.2989354-1-yebin@huaweicloud.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0c423e2ffa7edd3f8f9bcf17ce73fa9c7509b99e upstream.
The Z390 DARK mainboard uses a CA0132 audio controller. The quirk is
needed to enable surround sound and 3.5mm headphone jack handling in
the front audio connector as well as in the rear of the board when in
stereo mode.
Page 97 of the linked manual contains instructions to setup the
controller.
Signed-off-by: Xian Wang <dev@xianwang.io>
Cc: stable@vger.kernel.org
Link: https://www.evga.com/support/manuals/files/131-CS-E399.pdf
Link: https://lore.kernel.org/r/20221104202913.13904-1-dev@xianwang.io
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fdcc4c22b7ab20e90b97f8bc6225d876b72b8f16 upstream.
We are able to power down the GPU and audio via the GPU driver
so flag these asics as supporting runtime pm.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221108084746.583058-1-evan.quan@amd.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e2c9105e0b743c92a157389d40f00b81bdd09fe upstream.
Treat the claimed 96kHz 1ch in the descriptors as 48kHz 2ch, so that
the audio stream doesn't sound mono. Also fix initial stream
alignment, so that left and right channels are in the correct order.
Signed-off-by: John Veness <john-linux@pelago.org.uk>
Link: https://lore.kernel.org/r/20220624140757.28758-1-john-linux@pelago.org.uk
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f1fae475f10a26b7e34da4ff2e2f19b7feb3548e ]
i2sbus_add_dev() is supposed to return the number of probed devices,
i.e. either 1 or 0. However, i2sbus_add_dev() has one error handling
that returns -ENODEV; this will screw up the accumulation number
counted in the caller, i2sbus_probe().
Fix the return value to 0 and add the comment for better understanding
for readers.
Fixes: f3d9478b2c ("[ALSA] snd-aoa: add snd-aoa")
Link: https://lore.kernel.org/r/20221027065233.13292-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4a4c8482e370d697738a78dcd7bf2780832cb712 ]
dev_set_name() in soundbus_add_one() allocates memory for name, it need be
freed when of_device_register() fails, call soundbus_dev_put() to give up
the reference that hold in device_initialize(), so that it can be freed in
kobject_cleanup() when the refcount hit to 0. And other resources are also
freed in i2sbus_release_dev(), so it can return 0 directly.
Fixes: f3d9478b2c ("[ALSA] snd-aoa: add snd-aoa")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221027013438.991920-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4881bda5ea05c8c240fc8afeaa928e2bc43f61fa ]
If device_register() fails in snd_ac97_dev_register(), it should
call put_device() to give up reference, or the name allocated in
dev_set_name() is leaked.
Fixes: 0ca06a00e2 ("[ALSA] AC97 bus interface for ad-hoc drivers")
Signed-off-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20221019093025.1179475-1-yangyingliang@huawei.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1dd5166102e7ca91e8c5d833110333835e147ddb ]
Update LPASS_HDMI_TX_PARITY_ADDR register as volatile, to fix
dp audio failures observed with some of external monitors.
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reviewed-by: Stephen Boyd <swboyd@chromium.org>
Link: https://lore.kernel.org/r/1665825530-7593-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9a3545b1d771fb7b06a487796c40288c02c41c5 ]
Update HDMI volatile registers list as DMA, Channel Selection registers,
vbit control registers are being reflected by hardware DP port
disconnection.
This update is required to fix no display and no sound issue observed
after reconnecting TAMA/SANWA DP cables.
Once DP cable is unplugged, DMA control registers are being reset by
hardware, however at second plugin, new dma control values does not
updated to the dma hardware registers since new register value and
cached values at the time of first plugin are same.
Fixes: 7cb37b7bd0 ("ASoC: qcom: Add support for lpass hdmi driver")
Signed-off-by: Srinivasa Rao Mandadapu <quic_srivasam@quicinc.com>
Reported-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Link: https://lore.kernel.org/r/1665637711-13300-1-git-send-email-quic_srivasam@quicinc.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 50895a55bcfde8ac6f22a37c6bc8cff506b3c7c6 upstream.
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
sound/pci/rme9652/hdsp.c:3953 hdsp_channel_buffer_location() warn: 'hdsp->channel_map[channel]' is unsigned
sound/pci/rme9652/hdsp.c:4153 snd_hdsp_channel_info() warn: impossible condition '(hdsp->channel_map[channel] < 0) => (0-255 < 0)'
sound/pci/rme9652/rme9652.c:1833 rme9652_channel_buffer_location() warn: 'rme9652->channel_map[channel]' is unsigned
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221025000313.546261-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ee03c0f200eb0d9f22dd8732d9fb7956d91019c2 upstream.
With char becoming unsigned by default, and with `char` alone being
ambiguous and based on architecture, signed chars need to be marked
explicitly as such. This fixes warnings like:
sound/pci/au88x0/au88x0_core.c:2029 vortex_adb_checkinout() warn: signedness bug returning '(-22)'
sound/pci/au88x0/au88x0_core.c:2046 vortex_adb_checkinout() warn: signedness bug returning '(-12)'
sound/pci/au88x0/au88x0_core.c:2125 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, (0), en, 0)' is unsigned
sound/pci/au88x0/au88x0_core.c:2170 vortex_adb_allocroute() warn: 'vortex_adb_checkinout(vortex, stream->resources, en, 4)' is unsigned
As well, since one function returns errnos, return an `int` rather than
a `signed char`.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20221024162929.536004-1-Jason@zx2c4.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
