commit ab4e0744e99b87e1a223e89fc3c9ae44f727c9a6 upstream.
Decouple ORC entries from instructions. This simplifies the
control/data flow, and is going to make it easier to support alternative
instructions which change the stack layout.
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ben Hutchings <ben@decadent.org.uk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 83844aacab2015da1dba1df0cc61fc4b4c4e8076 ]
When packets are not received, they aren't received on $host1_if, so the
message talking about the second host not receiving them is incorrect.
Fix it.
Fixes: d4deb01467 ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a635d3e1c80626237fdae47a5545b6655d8d81c ]
The first host interface has by default no interest in receiving packets
MAC DA de:ad:be:ef:13:37, so it might drop them before they hit the tc
filter and this might confuse the selftest.
Enable promiscuous mode such that the filter properly counts received
packets.
Fixes: d4deb01467 ("selftests: forwarding: Add a test for FDB learning")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8e629b05f5d23f9649c901bef09fab8b0c2e4b9 ]
As mentioned in the blamed commit, flood_unicast_test() works by
checking the match count on a tc filter placed on the receiving
interface.
But the second host interface (host2_if) has no interest in receiving a
packet with MAC DA de:ad:be:ef:13:37, so its RX filter drops it even
before the ingress tc filter gets to be executed. So we will incorrectly
get the message "Packet was not flooded when should", when in fact, the
packet was flooded as expected but dropped due to an unrelated reason,
at some other layer on the receiving side.
Force h2 to accept this packet by temporarily placing it in promiscuous
mode. Alternatively we could either deliver to its MAC address or use
tcpdump_start, but this has the fewest complications.
This fixes the "flooding" test from bridge_vlan_aware.sh and
bridge_vlan_unaware.sh, which calls flood_test from the lib.
Fixes: 236dd50bf6 ("selftests: forwarding: Add a test for flooded traffic")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Tested-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 889c5d60fbcf332c8b6ab7054d45f2768914a375 upstream.
Just before the 2.35 release of glibc, the __rseq_offset userspace ABI
was changed from int to ptrdiff_t.
Adapt to this change in the kernel selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://sourceware.org/pipermail/libc-alpha/2022-February/136024.html
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 127b6429d235ab7c358223bbfd8a8b8d8cc799b6 upstream.
Rather than use rseq_get_abi() and pass its result through a register to
the inline assembler, directly access the per-thread rseq area through a
memory reference combining the %gs segment selector, the constant offset
of the field in struct rseq, and the rseq_offset value (in a register).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-16-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4e15bb766b6c6e963a4d33629034d0ec3b7637df upstream.
Rather than use rseq_get_abi() and pass its result through a register to
the inline assembler, directly access the per-thread rseq area through a
memory reference combining the %fs segment selector, the constant offset
of the field in struct rseq, and the rseq_offset value (in a register).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-15-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b53823fb2ef854222853be164f3b1e815f315144 upstream.
gcc and clang each have their own compiler bugs with respect to asm
goto. Implement a work-around for compiler versions known to have those
bugs.
gcc prior to 4.8.2 miscompiles asm goto.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
gcc prior to 8.1.0 miscompiles asm goto at O1.
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103908
clang prior to version 13.0.1 miscompiles asm goto at O2.
https://github.com/llvm/llvm-project/issues/52735
Work around these issues by adding a volatile inline asm with
memory clobber in the fallthrough after the asm goto and at each
label target. Emit this for all compilers in case other similar
issues are found in the future.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-14-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94c5cf2a0e193afffef8de48ddc42de6df7cac93 upstream.
The arm and mips work-around for asm goto size guess issues are not
properly documented, and lack reference to specific compiler versions,
upstream compiler bug tracker entry, and reproducer.
I can only find a loosely documented patch in my original LKML rseq post
refering to gcc < 7 on ARM, but it does not appear to be sufficient to
track the exact issue. Also, I am not sure MIPS really has the same
limitation.
Therefore, remove the work-around until we can properly document this.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/20171121141900.18471-17-mathieu.desnoyers@efficios.com/
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 26dc8a6d8e11552f3b797b5aafe01071ca32d692 upstream.
The semantic of off_t is for file offsets. We mean to use it as an
offset from a pointer. We really expect it to fit in a single register,
and not use a 64-bit type on 32-bit architectures.
Fix runtime issues on ppc32 where the offset is always 0 due to
inconsistency between the argument type (off_t -> 64-bit) and type
expected by the inline assembler (32-bit).
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-11-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit de6b52a21420a18dc8a36438d581efd1313d5fe3 upstream.
Building the rseq basic test with
gcc version 5.4.0 20160609 (Ubuntu 5.4.0-6ubuntu1~16.04.12)
Target: powerpc-linux-gnu
leads to these errors:
/tmp/ccieEWxU.s: Assembler messages:
/tmp/ccieEWxU.s:118: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:118: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:121: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:121: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:626: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:626: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:629: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:629: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:735: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:735: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:738: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:738: Error: junk at end of line: `,8'
/tmp/ccieEWxU.s:741: Error: syntax error; found `,', expected `('
/tmp/ccieEWxU.s:741: Error: junk at end of line: `,8'
Makefile:581: recipe for target 'basic_percpu_ops_test.o' failed
Based on discussion with Linux powerpc maintainers and review of
the use of the "m" operand in powerpc kernel code, add the missing
%Un%Xn (where n is operand number) to the lwz, stw, ld, and std
instructions when used with "m" operands.
Using "WORD" to mean either a 32-bit or 64-bit type depending on
the architecture is misleading. The term "WORD" really means a
32-bit type in both 32-bit and 64-bit powerpc assembler. The intent
here is to wrap load/store to intptr_t into common macros for both
32-bit and 64-bit.
Rename the macros with a RSEQ_ prefix, and use the terms "INT"
for always 32-bit type, and "LONG" for architecture bitness-sized
type.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-10-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 24d1136a29da5953de5c0cbc6c83eb62a1e0bf14 upstream.
ppc32 incorrectly uses padding as rseq_cs pointer field. Fix this by
using the rseq_cs.arch.ptr field.
Use this field across all architectures.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-9-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 233e667e1ae3e348686bd9dd0172e62a09d852e1 upstream.
glibc-2.35 (upcoming release date 2022-02-01) exposes the rseq per-thread
data in the TCB, accessible at an offset from the thread pointer, rather
than through an actual Thread-Local Storage (TLS) variable, as the
Linux kernel selftests initially expected.
The __rseq_abi TLS and glibc-2.35's ABI for per-thread data cannot
actively coexist in a process, because the kernel supports only a single
rseq registration per thread.
Here is the scheme introduced to ensure selftests can work both with an
older glibc and with glibc-2.35+:
- librseq exposes its own "rseq_offset, rseq_size, rseq_flags" ABI.
- librseq queries for glibc rseq ABI (__rseq_offset, __rseq_size,
__rseq_flags) using dlsym() in a librseq library constructor. If those
are found, copy their values into rseq_offset, rseq_size, and
rseq_flags.
- Else, if those glibc symbols are not found, handle rseq registration
from librseq and use its own IE-model TLS to implement the rseq ABI
per-thread storage.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-8-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 886ddfba933f5ce9d76c278165d834d114ba4ffc upstream.
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible
at an offset from the thread pointer.
The toolchains do not implement accessing the thread pointer on all
architectures. Provide thread pointer getters for ppc and x86 which
lack (or lacked until recently) toolchain support.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-7-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e546cd48ccc456074ddb8920732aef4af65d7ca7 upstream.
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
glibc-2.35 exposes the rseq per-thread data in the TCB, accessible
at an offset from the thread pointer, rather than through an actual
Thread-Local Storage (TLS) variable, as the kernel selftests initially
expected.
Introduce a rseq_get_abi() helper, initially using the __rseq_abi
TLS variable, in preparation for changing this userspace ABI for one
which is compatible with glibc-2.35.
Note that the __rseq_abi TLS and glibc-2.35's ABI for per-thread data
cannot actively coexist in a process, because the kernel supports only
a single rseq registration per thread.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-6-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 94b80a19ebfe347a01301d750040a61c38200e2b upstream.
This is done in preparation for the selftest uplift to become compatible
with glibc-2.35.
All accesses to the __rseq_abi fields are volatile, but remove the
volatile from the TLS variable declaration, otherwise we are stuck with
volatile for the upcoming rseq_get_abi() helper.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-5-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 5c105d55a9dc9e01535116ccfc26e703168a574f upstream.
The Linux kernel rseq uapi header has a broken layout for the
rseq_cs.ptr field on 32-bit little endian architectures. The entire
rseq_cs.ptr field is planned for removal, leaving only the 64-bit
rseq_cs.ptr64 field available.
Both glibc and librseq use their own copy of the Linux kernel uapi
header, where they introduce proper union fields to access to the 32-bit
low order bits of the rseq_cs pointer on 32-bit architectures.
Introduce a copy of the Linux kernel uapi headers in the Linux kernel
selftests.
Signed-off-by: Mathieu Desnoyers <mathieu.desnoyers@efficios.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20220124171253.22072-2-mathieu.desnoyers@efficios.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 07ad4f7629d4802ff0d962b0ac23ea6445964e2a upstream.
ARRAY_SIZE is defined in several selftests. Remove definitions from
individual test files and include header file for the define instead.
ARRAY_SIZE define is added in a separate patch to prepare for this
change.
Remove ARRAY_SIZE from rseq tests and pickup the one defined in
kselftest.h.
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b968080808f7f28b89aa495b7402ba48eb17ee93 upstream.
udpgso_bench.sh has been running its IPv6 TCP test with IPv4 arguments
since its initial conmit. Looks like a typo.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Cc: willemb@google.com
Signed-off-by: Dimitris Michailidis <dmichail@fungible.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20220623000234.61774-1-dmichail@fungible.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5d79d8af8dec58bf709b3124d09d9572edd9c617 ]
Before change:
make -C netfilter
TEST: performance
net,port [SKIP]
perf not supported
port,net [SKIP]
perf not supported
net6,port [SKIP]
perf not supported
port,proto [SKIP]
perf not supported
net6,port,mac [SKIP]
perf not supported
net6,port,mac,proto [SKIP]
perf not supported
net,mac [SKIP]
perf not supported
After change:
net,mac [ OK ]
baseline (drop from netdev hook): 2061098pps
baseline hash (non-ranged entries): 1606741pps
baseline rbtree (match on first field only): 1191607pps
set with 1000 full, ranged entries: 1639119pps
ok 8 selftests: netfilter: nft_concat_range.sh
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Jie2x Zhou <jie2x.zhou@intel.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4ddc844eb81da59bfb816d8d52089aba4e59e269 upstream.
in current Linux, MTU policing does not take into account that packets at
the TC ingress have the L2 header pulled. Thus, the same TC police action
(with the same value of tcfp_mtu) behaves differently for ingress/egress.
In addition, the full GSO size is compared to tcfp_mtu: as a consequence,
the policer drops GSO packets even when individual segments have the L2 +
L3 + L4 + payload length below the configured valued of tcfp_mtu.
Improve the accuracy of MTU policing as follows:
- account for mac_len for non-GSO packets at TC ingress.
- compare MTU threshold with the segmented size for GSO packets.
Also, add a kselftest that verifies the correct behavior.
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Reviewed-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
[dcaratti: fix conflicts due to lack of the following commits:
- commit 2ffe0395288a ("net/sched: act_police: add support for
packet-per-second policing")
- commit 53b61f29367d ("selftests: forwarding: Add tc-police tests for
packets per second")]
Link: https://lore.kernel.org/netdev/876d597a0ff55f6ba786f73c5a9fd9eb8d597a03.1644514748.git.dcaratti@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 027bbb884be006b05d9c577d6401686053aa789e upstream
The enumeration of MD_CLEAR in CPUID(EAX=7,ECX=0).EDX{bit 10} is not an
accurate indicator on all CPUs of whether the VERW instruction will
overwrite fill buffers. FB_CLEAR enumeration in
IA32_ARCH_CAPABILITIES{bit 17} covers the case of CPUs that are not
vulnerable to MDS/TAA, indicating that microcode does overwrite fill
buffers.
Guests running in VMM environments may not be aware of all the
capabilities/vulnerabilities of the host CPU. Specifically, a guest may
apply MDS/TAA mitigations when a virtual CPU is enumerated as vulnerable
to MDS/TAA even when the physical CPU is not. On CPUs that enumerate
FB_CLEAR_CTRL the VMM may set FB_CLEAR_DIS to skip overwriting of fill
buffers by the VERW instruction. This is done by setting FB_CLEAR_DIS
during VMENTER and resetting on VMEXIT. For guests that enumerate
FB_CLEAR (explicitly asking for fill buffer clear capability) the VMM
will not use FB_CLEAR_DIS.
Irrespective of guest state, host overwrites CPU buffers before VMENTER
to protect itself from an MMIO capable guest, as part of mitigation for
MMIO Stale Data vulnerabilities.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 51802186158c74a0304f51ab963e7c2b3a2b046f upstream
Processor MMIO Stale Data is a class of vulnerabilities that may
expose data after an MMIO operation. For more details please refer to
Documentation/admin-guide/hw-vuln/processor_mmio_stale_data.rst
Add the Processor MMIO Stale Data bug enumeration. A microcode update
adds new bits to the MSR IA32_ARCH_CAPABILITIES, define them.
Signed-off-by: Pawan Gupta <pawan.kumar.gupta@linux.intel.com>
Signed-off-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 282e5f8fe907dc3f2fbf9f2103b0e62ffc3a68a5 ]
When no l3 address is given, priv->family is set to NFPROTO_INET and
the evaluation function isn't called.
Call it too so l4-only rewrite can work.
Also add a test case for this.
Fixes: a33f387ecd5aa ("netfilter: nft_nat: allow to specify layer 4 protocol NAT only")
Reported-by: Yi Chen <yiche@redhat.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b24192a17337abbf3f44aaa75e15df14a2d0016e ]
The function percent_rmt_hitm_cmp() wrongly uses local HITMs for
sorting remote HITMs.
Since this function is to sort cache lines for remote HITMs, this patch
changes to use 'rmt_hitm' field for correct sorting.
Fixes: 9cb3500afc ("perf c2c report: Add hitm/store percent related sort keys")
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Joe Mario <jmario@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220530084253.750190-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 213adc63dfbcdff9a0c19ec1f2681fda9c05cf6d upstream.
Commit 54de76c01239 ("kselftest/cgroup: fix test_stress.sh to use OUTPUT
dir") changes the test_core command path from . to $OUTPUT. However,
variable OUTPUT may not be defined if the command is run interactively.
Fix that by using ${OUTPUT:-.} to cover both cases.
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f4df0dbbe62ee8e4405a57b27ccd54393971c773 ]
In the origin code, when "ExtSel" is 1, the eventcode will change to
"eventcode |= 1 << 21”. For event “UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS",
its "ExtSel" is "1", its eventcode will change from 0x1E to 0x20001E,
but in fact the eventcode should <=0x1FF, so this will cause the parse
fail:
# perf stat -e "UNC_Q_RxL_CREDITS_CONSUMED_VN0.DRS" -a sleep 0.1
event syntax error: '.._RxL_CREDITS_CONSUMED_VN0.DRS'
\___ value too big for format, maximum is 511
On the perf kernel side, the kernel assumes the valid bits are continuous.
It will adjust the 0x100 (bit 8 for perf tool) to bit 21 in HW.
DEFINE_UNCORE_FORMAT_ATTR(event_ext, event, "config:0-7,21");
So the perf tool follows the kernel side and just set bit8 other than bit21.
Fixes: fedb2b5182 ("perf jevents: Add support for parsing uncore json files")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Xing Zhengjun <zhengjun.xing@linux.intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220525140410.1706851-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c4040212bc97d16040712a410335f93bc94d2262 ]
If the slang lib is not installed on the system, perf c2c tool disables TUI
mode and roll back to use stdio mode; but the flag 'c2c.use_stdio' is
missed to set true and thus it wrongly applies UI quirks in the function
ui_quirks().
This commit forces to use stdio interface if slang is not supported, and
it can avoid to apply the UI quirks and show the correct metric header.
Before:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
After:
=================================================
Shared Cache Line Distribution Pareto
=================================================
-------------------------------------------------------------------------------
0 0 0 99 0 0 0 0xaaaac17d6000
-------------------------------------------------------------------------------
0.00% 0.00% 6.06% 0.00% 0.00% 0.00% 0x20 N/A 0 0xaaaac17c25ac 0 0 43 375 18469 2 [.] 0x00000000000025ac memstress memstress[25ac] 0
0.00% 0.00% 93.94% 0.00% 0.00% 0.00% 0x29 N/A 0 0xaaaac17c3e88 0 0 173 180 135 2 [.] 0x0000000000003e88 memstress memstress[3e88] 0
Fixes: 5a1a99cd2e ("perf c2c report: Add main TUI browser")
Reported-by: Joe Mario <jmario@redhat.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20220526145400.611249-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 54de76c0123915e7533ce352de30a1f2d80fe81f ]
Running cgroup kselftest with O= fails to run the with_stress test due
to hardcoded ./test_core. Find test_core binary using the OUTPUT directory.
Fixes: 1a99fcc035 ("selftests: cgroup: Run test_core under interfering stress")
Signed-off-by: Phil Auld <pauld@redhat.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 630af16eee495f583db5202c3613d1b191f10694 ]
This fixes the issue where the build will fail if only the Python2
runtime is installed but the Python3 devtools are installed. Currently
the workaround is 'make PYTHON=python3'.
Fix it by autodetecting Python based on whether python[x]-config exists
rather than just python[x] because both are needed for the build. Then
-config is stripped to find the Python runtime.
Testing
=======
* Auto detect links with Python3 when the v3 devtools are installed
and only Python 2 runtime is installed
* Auto detect links with Python2 when both devtools are installed
* Sensible warning is printed if no Python devtools are installed
* 'make PYTHON=x' still automatically sets PYTHON_CONFIG=x-config
* 'make PYTHON=x' fails if x-config doesn't exist
* 'make PYTHON=python3' overrides Python2 devtools
* 'make PYTHON=python2' overrides Python3 devtools
* 'make PYTHON_CONFIG=x-config' works
* 'make PYTHON=x PYTHON_CONFIG=x' works
* 'make PYTHON=missing' reports an error
* 'make PYTHON_CONFIG=missing' reports an error
Fixes: 79373082fa ("perf python: Autodetect python3 binary")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: James Clark <james.clark@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220309194313.3350126-2-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4d27cf1d9de5becfa4d1efb2ea54dba1b9fc962a ]
'struct perf_data' in util/data.h uses the "u64" data type, which is
defined in "linux/types.h".
If we only include util/data.h, the following compilation error occurs:
util/data.h:38:3: error: unknown type name ‘u64’
u64 version;
^~~
Solution: include "linux/types.h." to add the needed type definitions.
Fixes: 258031c017 ("perf header: Add DIR_FORMAT feature to describe directory data")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220429090539.212448-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 966a7509325395c51c5f6d89e7352b0585e4804b ]
Fix the bug in bpf_object__relocate_core() which can lead to finding
invalid matching BPF program when processing CO-RE relocation. IF
matching program is not found, last encountered program will be assumed
to be correct program and thus error detection won't detect the problem.
Fixes: 9c82a63cf3 ("libbpf: Fix CO-RE relocs against .text section")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220426004511.2691730-4-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c7b607fa9325ccc94982774c505176677117689c ]
Currently if opening /dev/null fails to open then file pointer fp
is null and further access to fp via fprintf will cause a null
pointer dereference. Fix this by returning a negative error value
when a null fp is detected.
Detected using cppcheck static analysis:
tools/testing/selftests/resctrl/fill_buf.c:124:6: note: Assuming
that condition '!fp' is not redundant
if (!fp)
^
tools/testing/selftests/resctrl/fill_buf.c:126:10: note: Null
pointer dereference
fprintf(fp, "Sum: %d ", ret);
Fixes: a2561b12fe ("selftests/resctrl: Add built in benchmark")
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e89d57d938c8fa80c457982154ed6110804814fe ]
During BPF static linking, all the ELF relocations and .BTF.ext
information (including CO-RE relocations) are preserved for __weak
subprograms that were logically overriden by either previous weak
subprogram instance or by corresponding "strong" (non-weak) subprogram.
This is just how native user-space linkers work, nothing new.
But libbpf is over-zealous when processing CO-RE relocation to error out
when CO-RE relocation belonging to such eliminated weak subprogram is
encountered. Instead of erroring out on this expected situation, log
debug-level message and skip the relocation.
Fixes: db2b8b0642 ("libbpf: Support CO-RE relocations for multi-prog sections")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220408181425.2287230-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 6397b6418935773a34b533b3348b03f4ce3d7050 ]
ICX (and its duplicates) require special hard-coded DRAM RAPL units,
rather than using the generic RAPL energy units.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e71b7f1f44d3d88c677769c85ef0171caf9fc89f ]
The 'ping' utility is able to manage two kind of sockets (raw or icmp),
depending on the sysctl ping_group_range. By default, ping_group_range is
set to '1 0', which forces ping to use an ip raw socket.
Let's replay the ping tests by allowing 'ping' to use the ip icmp socket.
After the previous patch, ipv4 tests results are the same with both kinds
of socket. For ipv6, there are a lot a new failures (the previous patch
fixes only two cases).
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8ac1c478424a9a14669b8cef7389b1e14e5229d ]
The compilation on s390 results in this error:
# make DEBUG=y bench/numa.o
...
bench/numa.c: In function ‘__bench_numa’:
bench/numa.c:1749:81: error: ‘%d’ directive output may be truncated
writing between 1 and 11 bytes into a region of size between
10 and 20 [-Werror=format-truncation=]
1749 | snprintf(tname, sizeof(tname), "process%d:thread%d", p, t);
^~
...
bench/numa.c:1749:64: note: directive argument in the range
[-2147483647, 2147483646]
...
#
The maximum length of the %d replacement is 11 characters because of the
negative sign. Therefore extend the array by two more characters.
Output after:
# make DEBUG=y bench/numa.o > /dev/null 2>&1; ll bench/numa.o
-rw-r--r-- 1 root root 418320 May 19 09:11 bench/numa.o
#
Fixes: 3aff8ba0a4 ("perf bench numa: Avoid possible truncation when using snprintf()")
Suggested-by: Namhyung Kim <namhyung@gmail.com>
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Sven Schnelle <svens@linux.ibm.com>
Cc: Vasily Gorbik <gor@linux.ibm.com>
Link: https://lore.kernel.org/r/20220520081158.2990006-1-tmricht@linux.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f03560a57c1f60db6ac23ffd9714e1c69e2f95c7 ]
When using pthreads, one has to compile and link with -lpthread,
otherwise e.g. glibc is not guaranteed to be reentrant.
This replaces -lpthread.
Reported-by: Matthew Wilcox <willy@infradead.org>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 41c240099fe09377b6b9f8272e45d2267c843d3e ]
The tools/testing/selftests/vm/Makefile uses the variable TARGETS
internally to generate a list of platform-specific binary build targets
suffixed with _{32,64}. When building the selftests using its own
Makefile directly, such as via the following command run in a kernel tree:
One receives an error such as the following:
make: Entering directory '/root/linux/tools/testing/selftests'
make --no-builtin-rules ARCH=x86 -C ../../.. headers_install
make[1]: Entering directory '/root/linux'
INSTALL ./usr/include
make[1]: Leaving directory '/root/linux'
make[1]: Entering directory '/root/linux/tools/testing/selftests/vm'
make[1]: *** No rule to make target 'vm.c', needed by '/root/linux/tools/testing/selftests/vm/vm_64'. Stop.
make[1]: Leaving directory '/root/linux/tools/testing/selftests/vm'
make: *** [Makefile:175: all] Error 2
make: Leaving directory '/root/linux/tools/testing/selftests'
The TARGETS variable passed to tools/testing/selftests/Makefile collides
with the TARGETS used in tools/testing/selftests/vm/Makefile, so rename
the latter to VMTARGETS, eliminating the collision with no functional
change.
Link: https://lkml.kernel.org/r/20220504213454.1282532-1-jsavitz@redhat.com
Fixes: f21fda8f64 ("selftests: vm: pkeys: fix multilib builds for x86")
Signed-off-by: Joel Savitz <jsavitz@redhat.com>
Acked-by: Nico Pache <npache@redhat.com>
Cc: Joel Savitz <jsavitz@redhat.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Sandipan Das <sandipan@linux.ibm.com>
Cc: Dave Hansen <dave.hansen@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 5a7c5f70c743c6cf32b44b05bd6b19d4ad82f49d upstream.
As discussed here with Ido Schimmel:
https://patchwork.kernel.org/project/netdevbpf/patch/20220224102908.5255-2-jianbol@nvidia.com/
the default conform-exceed action is "reclassify", for a reason we don't
really understand.
The point is that hardware can't offload that police action, so not
specifying "conform-exceed" was always wrong, even though the command
used to work in hardware (but not in software) until the kernel started
adding validation for it.
Fix the command used by the selftest by making the policer drop on
exceed, and pass the packet to the next action (goto) on conform.
Fixes: 8cd6b020b6 ("selftests: ocelot: add some example VCAP IS1, IS2 and ES0 tc offloads")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Link: https://lore.kernel.org/r/20220503121428.842906-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3122257c02afd9f199a8fc84ae981e1fc4958532 upstream.
In emulated environments, the bridge ports enslaved to br1 get a carrier
before changing br1's PVID. This means that by the time the PVID is
changed, br1 is already operational and configured with an IPv6
link-local address.
When the test is run with netdevs registered by mlxsw, changing the PVID
is vetoed, as changing the VID associated with an existing L3 interface
is forbidden. This restriction is similar to the 8021q driver's
restriction of changing the VID of an existing interface.
Fix this by taking br1 down and bringing it back up when it is fully
configured.
With this fix, the test reliably passes on top of both the SW and HW
data paths (emulated or not).
Fixes: 239e754af8 ("selftests: forwarding: Test mirror-to-gretap w/ UL 802.1q")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Link: https://lore.kernel.org/r/20220502084507.364774-1-idosch@nvidia.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2bfed7d2ffa5d86c462d3e2067f2832eaf8c04c7 upstream.
Since commit 92d25637a3a4 ("kselftest: signal all child processes"), tests
are executed in background process groups. This means that trying to read
from stdin now throws SIGTTIN when stdin is a TTY, which breaks some
seccomp selftests that try to use read(0, NULL, 0) as a dummy syscall.
The simplest way to fix that is probably to just use -1 instead of 0 as
the dummy read()'s FD.
Fixes: 92d25637a3a4 ("kselftest: signal all child processes")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/20220319010011.1374622-1-jannh@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a5d20d42a2f2dc2b2f9e9361912062732414090d upstream.
Now the generic code can handle kallsyms fixup properly so no need to
keep the arch-functions anymore.
Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8799ebce84d672aae1dc3170510f6a3e66f96b11 upstream.
Now arch-specific functions all do the same thing. When it fixes the
symbol address it needs to check the boundary between the kernel image
and modules. For the last symbol in the previous region, it cannot
know the exact size as it's discarded already. Thus it just uses a
small page size (4096) and rounds it up like the last symbol.
Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-3-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 838425f2defe5262906b698752d28fd2fca1aac2 upstream.
The symbol fixup is necessary for symbols in kallsyms since they don't
have size info. So we use the next symbol's address to calculate the
size. Now it's also used for user binaries because sometimes they miss
size for hand-written asm functions.
There's a arch-specific function to handle kallsyms differently but
currently it cannot distinguish kallsyms from others. Pass this
information explicitly to handle it properly. Note that those arch
functions will be moved to the generic function so I didn't added it to
the arch-functions.
Fixes: 3cf6a32f3f2a4594 ("perf symbols: Fix symbol size calculation condition")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Heiko Carstens <hca@linux.ibm.com>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Will Deacon <will@kernel.org>
Cc: linux-s390@vger.kernel.org
Cc: linuxppc-dev@lists.ozlabs.org
Link: https://lore.kernel.org/r/20220416004048.1514900-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit ccb17caecfbd542f49a2a79ae088136ba8bfb794 ]
Since commit bb30acae4c ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't report result if the PERF_SAMPLE_DATA_SRC bit is missed in sample
type.
The commit ffab487052054162 ("perf: arm-spe: Fix perf report
--mem-mode") partially fixes the issue. It adds PERF_SAMPLE_DATA_SRC
bit for Arm SPE event, this allows the perf data file generated by
kernel v5.18-rc1 or later version can be reported properly.
On the other hand, perf tool still fails to be backward compatibility
for a data file recorded by an older version's perf which contains Arm
SPE trace data. This patch is a workaround in reporting phase, when
detects ARM SPE PMU event and without PERF_SAMPLE_DATA_SRC bit, it will
force to set the bit in the sample type and give a warning info.
Fixes: bb30acae4c ("perf report: Bail out --mem-mode if mem info is not available")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Tested-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Link: https://lore.kernel.org/r/20220414123201.842754-1-leo.yan@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 044011fdf162c5dd61c02841930c8f438a9adadb ]
The test verifies that packets are correctly flooded by the bridge and
the VXLAN device by matching on the encapsulated packets at the other
end. However, if packets other than those generated by the test also
ingress the bridge (e.g., MLD packets), they will be flooded as well and
interfere with the expected count.
Make the test more robust by making sure that only the packets generated
by the test can ingress the bridge. Drop all the rest using tc filters
on the egress of 'br0' and 'h1'.
In the software data path, the problem can be solved by matching on the
inner destination MAC or dropping unwanted packets at the egress of the
VXLAN device, but this is not currently supported by mlxsw.
Fixes: 94d302deae ("selftests: mlxsw: Add a test for VxLAN flooding")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: Amit Cohen <amcohen@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a668cc07f990d2ed19424d5c1a529521a9d1cee1 upstream.
perf_evsel::sample_id is an xyarray which can cause a segfault when
accessed beyond its size. e.g.
# perf record -e intel_pt// -C 1 sleep 1
Segmentation fault (core dumped)
#
That is happening because a dummy event is opened to capture text poke
events accross all CPUs, however the mmap logic is allocating according
to the number of user_requested_cpus.
In general, perf sometimes uses the evsel cpus to open events, and
sometimes the evlist user_requested_cpus. However, it is not necessary
to determine which case is which because the opened event file
descriptors are also in an xyarray, the size of whch can be used
to correctly allocate the size of the sample_id xyarray, because there
is one ID per file descriptor.
Note, in the affected code path, perf_evsel fd array is subsequently
used to get the file descriptor for the mmap, so it makes sense for the
xyarrays to be the same size there.
Fixes: d1a177595b ("libperf: Adopt perf_evlist__mmap()/munmap() from tools/perf")
Fixes: 246eba8e90 ("perf tools: Add support for PERF_RECORD_TEXT_POKE")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: stable@vger.kernel.org # 5.5+
Link: https://lore.kernel.org/r/20220413114232.26914-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit f034fc50d3c7d9385c20d505ab4cf56b8fd18ac7 ]
Fix incorrect debug message:
Attempting to add event pmu 'intel_pt' with '' that may result in
non-fatal errors
which always appears with perf record -vv and intel_pt e.g.
perf record -vv -e intel_pt//u uname
The message is incorrect because there will never be non-fatal errors.
Suppress the message if the PMU is 'selectable' i.e. meant to be
selected directly as an event.
Fixes: 4ac22b484d ("perf parse-events: Make add PMU verbose output clearer")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Link: http://lore.kernel.org/lkml/20220411061758.2458417-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ce64763c63854b4079f2e036638aa881a1fb3fbc ]
The selftest "mqueue/mq_perf_tests.c" use CPU_ALLOC to allocate
CPU set. This cpu set is used further in pthread_attr_setaffinity_np
and by pthread_create in the code. But in current code, allocated
cpu set is not freed.
Fix this issue by adding CPU_FREE in the "shutdown" function which
is called in most of the error/exit path for the cleanup. There are
few error paths which exit without using shutdown. Add a common goto
error path with CPU_FREE for these cases.
Fixes: 7820b0715b ("tools/selftests: add mq_perf_tests")
Signed-off-by: Athira Rajeev <atrajeev@linux.vnet.ibm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit bf35a7879f1dfb0d050fe779168bcf25c7de66f5 upstream.
When a task is writing to an fd opened by a different task, the perm check
should use the cgroup namespace of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 613e040e4dc285367bff0f8f75ea59839bc10947 upstream.
When a task is writing to an fd opened by a different task, the perm check
should use the credentials of the latter task. Add a test for it.
Tested-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b09c2baa56347ae65795350dfcc633dedb1c2970 upstream.
0644 is an odd perm to create a cgroup which is a directory. Use the regular
0755 instead. This is necessary for euid switching test case.
Reviewed-by: Michal Koutný <mkoutny@suse.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c2e46f6b3e3551558d44c4dc518b9667cb0d5f8b upstream.
On older distros struct clone_args does not have a cgroup member,
leading to build errors:
cgroup_util.c: In function 'clone_into_cgroup':
cgroup_util.c:343:4: error: 'struct clone_args' has no member named 'cgroup'
cgroup_util.c:346:33: error: invalid application of 'sizeof' to incomplete
type 'struct clone_args'
But the selftests already have a locally defined version of the
structure which is up to date, called __clone_args.
So use __clone_args which fixes the error.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Sachin Sant <sachinp@linux.vnet.ibm.com>>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 541f695cbcb6932c22638b06e0cbe1d56177e2e9 upstream.
Just like its done for ldopts and for both in tools/perf/Makefile.config.
Using `` to initialize PERL_EMBED_CCOPTS somehow precludes using:
$(filter-out SOMETHING_TO_FILTER,$(PERL_EMBED_CCOPTS))
And we need to do it to allow for building with versions of clang where
some gcc options selected by distros are not available.
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YktYX2OnLtyobRYD@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41caff459a5b956b3e23ba9ca759dd0629ad3dda upstream.
These make the feature check fail when using clang, so remove them just
like is done in tools/perf/Makefile.config to build perf itself.
Adding -Wno-compound-token-split-by-macro to tools/perf/Makefile.config
when building with clang is also necessary to avoid these warnings
turned into errors (-Werror):
CC /tmp/build/perf/util/scripting-engines/trace-event-perl.o
In file included from util/scripting-engines/trace-event-perl.c:35:
In file included from /usr/lib64/perl5/CORE/perl.h:4085:
In file included from /usr/lib64/perl5/CORE/hv.h:659:
In file included from /usr/lib64/perl5/CORE/hv_func.h:34:
In file included from /usr/lib64/perl5/CORE/sbox32_hash.h:4:
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '(' and '{' tokens introducing statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:38: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^~~~~~~~~~
/usr/lib64/perl5/CORE/perl.h:737:29: note: expanded from macro 'STMT_START'
# define STMT_START (void)( /* gcc supports "({ STATEMENTS; })" */
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: '{' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:80:49: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
#define ZAPHOD32_SCRAMBLE32(v,prime) STMT_START { \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: error: '}' and ')' tokens terminating statement expression appear in different macro expansion contexts [-Werror,-Wcompound-token-split-by-macro]
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:87:41: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
v ^= (v>>23); \
^
/usr/lib64/perl5/CORE/zaphod32_hash.h:150:5: note: ')' token is here
ZAPHOD32_SCRAMBLE32(state[0],0x9fade23b);
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
/usr/lib64/perl5/CORE/zaphod32_hash.h:88:3: note: expanded from macro 'ZAPHOD32_SCRAMBLE32'
} STMT_END
^~~~~~~~
/usr/lib64/perl5/CORE/perl.h:738:21: note: expanded from macro 'STMT_END'
# define STMT_END )
^
Please refer to the discussion on the Link: tag below, where Nathan
clarifies the situation:
<quote>
acme> And then get to the problems at the end of this message, which seem
acme> similar to the problem described here:
acme>
acme> From Nathan Chancellor <>
acme> Subject [PATCH] mwifiex: Remove unnecessary braces from HostCmd_SET_SEQ_NO_BSS_INFO
acme>
acme> https://lkml.org/lkml/2020/9/1/135
acme>
acme> So perhaps in this case its better to disable that
acme> -Werror,-Wcompound-token-split-by-macro when building with clang?
Yes, I think that is probably the best solution. As far as I can tell,
at least in this file and context, the warning appears harmless, as the
"create a GNU C statement expression from two different macros" is very
much intentional, based on the presence of PERL_USE_GCC_BRACE_GROUPS.
The warning is fixed in upstream Perl by just avoiding creating GNU C
statement expressions using STMT_START and STMT_END:
https://github.com/Perl/perl5/issues/18780https://github.com/Perl/perl5/pull/18984
If I am reading the source code correctly, an alternative to disabling
the warning would be specifying -DPERL_GCC_BRACE_GROUPS_FORBIDDEN but it
seems like that might end up impacting more than just this site,
according to the issue discussion above.
</quote>
Based-on-a-patch-by: Sedat Dilek <sedat.dilek@gmail.com>
Tested-by: Sedat Dilek <sedat.dilek@gmail.com> # Debian/Selfmade LLVM-14 (x86-64)
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Link: http://lore.kernel.org/lkml/YkxWcYzph5pC1EK8@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dd6e1fe91cdd52774ca642d1da75b58a86356b56 upstream.
The clang compiler complains about some options even without a source
file being available, while others require one, so use the simple
tools/build/feature/test-hello.c file.
Then check for the "is not supported" string in its output, in addition
to the "unknown argument" already being looked for.
This was noticed when building with clang-13 where -ffat-lto-objects
isn't supported and since we were looking just for "unknown argument"
and not providing a source code to clang, was mistakenly assumed as
being available and not being filtered to set of command line options
provided to clang, leading to a build failure.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Link: http://lore.kernel.org/lkml/
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3a8a0475861a443f02e3a9b57d044fe2a0a99291 upstream.
Using -ffat-lto-objects in the python feature test when building with
clang-13 results in:
clang-13: error: optimization flag '-ffat-lto-objects' is not supported [-Werror,-Wignored-optimization-argument]
error: command '/usr/sbin/clang' failed with exit code 1
cp: cannot stat '/tmp/build/perf/python_ext_build/lib/perf*.so': No such file or directory
make[2]: *** [Makefile.perf:639: /tmp/build/perf/python/perf.so] Error 1
Noticed when building on a docker.io/library/archlinux:base container.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Fangrui Song <maskray@google.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Keeping <john@metanate.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Nathan Chancellor <nathan@kernel.org>
Cc: Nick Desaulniers <ndesaulniers@google.com>
Cc: Sedat Dilek <sedat.dilek@gmail.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bc21e74d4775f883ae1f542c1f1dc7205b15d925 ]
If a perf event doesn't fit into remaining buffer space return NULL to
remap buf and fetch the event again.
Keep the logic to error out on inadequate input from fuzzing.
This fixes perf failing on ChromeOS (with 32b userspace):
$ perf report -v -i perf.data
...
prefetch_event: head=0x1fffff8 event->header_size=0x30, mmap_size=0x2000000: fuzzed or compressed perf.data?
Error:
failed to process sample
Fixes: 57fc032ad6 ("perf session: Avoid infinite loop when seeing invalid header.size")
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: Denis Nikitin <denik@chromium.org>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/r/20220330031130.2152327-1-denik@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aeee9dc53ce405d2161f9915f553114e94e5b677 ]
eprintf() does not expect va_list as the type of the 4th parameter.
Use veprintf() because it does.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Fixes: 428dab813a ("libperf: Merge libperf_set_print() into libperf_init()")
Cc: Jiri Olsa <jolsa@kernel.org>
Link: https://lore.kernel.org/r/20220408132625.2451452-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ffab487052054162b3b6c9c6005777ec6cfcea05 ]
Since commit bb30acae4c ("perf report: Bail out --mem-mode if mem
info is not available") "perf mem report" and "perf report --mem-mode"
don't allow opening the file unless one of the events has
PERF_SAMPLE_DATA_SRC set.
SPE doesn't have this set even though synthetic memory data is generated
after it is decoded. Fix this issue by setting DATA_SRC on SPE events.
This has no effect on the data collected because the SPE driver doesn't
do anything with that flag and doesn't generate samples.
Fixes: bb30acae4c ("perf report: Bail out --mem-mode if mem info is not available")
Signed-off-by: James Clark <james.clark@arm.com>
Tested-by: Leo Yan <leo.yan@linaro.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: German Gomez <german.gomez@arm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Will Deacon <will@kernel.org>
Link: https://lore.kernel.org/r/20220408144056.1955535-1-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0908a66ad1124c1634c33847ac662106f7f2c198 ]
There are cases where clang compiler is packaged in a way
readelf is a symbolic link to llvm-readelf. In such cases,
llvm-readelf will be used instead of default binutils readelf,
and the following error will appear during libbpf build:
# Warning: Num of global symbols in
# /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/sharedobjs/libbpf-in.o (367)
# does NOT match with num of versioned symbols in
# /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf.so libbpf.map (383).
# Please make sure all LIBBPF_API symbols are versioned in libbpf.map.
# --- /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_global_syms.tmp ...
# +++ /home/yhs/work/bpf-next/tools/testing/selftests/bpf/tools/build/libbpf/libbpf_versioned_syms.tmp ...
# @@ -324,6 +324,22 @@
# btf__str_by_offset
# btf__type_by_id
# btf__type_cnt
# +LIBBPF_0.0.1
# +LIBBPF_0.0.2
# +LIBBPF_0.0.3
# +LIBBPF_0.0.4
# +LIBBPF_0.0.5
# +LIBBPF_0.0.6
# +LIBBPF_0.0.7
# +LIBBPF_0.0.8
# +LIBBPF_0.0.9
# +LIBBPF_0.1.0
# +LIBBPF_0.2.0
# +LIBBPF_0.3.0
# +LIBBPF_0.4.0
# +LIBBPF_0.5.0
# +LIBBPF_0.6.0
# +LIBBPF_0.7.0
# libbpf_attach_type_by_name
# libbpf_find_kernel_btf
# libbpf_find_vmlinux_btf_id
# make[2]: *** [Makefile:184: check_abi] Error 1
# make[1]: *** [Makefile:140: all] Error 2
The above failure is due to different printouts for some ABS
versioned symbols. For example, with the same libbpf.so,
$ /bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0
...
$ /opt/llvm/bin/readelf --dyn-syms --wide tools/lib/bpf/libbpf.so | grep "LIBBPF" | grep ABS
134: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.5.0@@LIBBPF_0.5.0
202: 0000000000000000 0 OBJECT GLOBAL DEFAULT ABS LIBBPF_0.6.0@@LIBBPF_0.6.0
...
The binutils readelf doesn't print out the symbol LIBBPF_* version and llvm-readelf does.
Such a difference caused libbpf build failure with llvm-readelf.
The proposed fix filters out all ABS symbols as they are not part of the comparison.
This works for both binutils readelf and llvm-readelf.
Reported-by: Delyan Kratunov <delyank@fb.com>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220204214355.502108-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b50d3b46f84282d795ae3076111acb75ae1031f3 ]
The purpose of the last test case is to test VXLAN encapsulation and
decapsulation when the underlay lookup takes place in a non-default VRF.
This is achieved by enslaving the physical device of the tunnel to a
VRF.
The binding of the VXLAN UDP socket to the VRF happens when the VXLAN
device itself is opened, not when its physical device is opened. This
was also mentioned in the cited commit ("tests that moving the underlay
from a VRF to another works when down/up the VXLAN interface"), but the
test did something else.
Fix it by reopening the VXLAN device instead of its physical device.
Before:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
After:
# ./test_vxlan_under_vrf.sh
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [ OK ]
Fixes: 03f1c26b1c ("test/net: Add script for VXLAN underlay in a VRF")
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20220324200514.1638326-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ec80906b0fbd7be11e3e960813b977b1ffe5f8fe ]
When test_lirc_mode2_user exec failed, the test report failed but still
exit with 0. Fix it by exiting with an error code.
Another issue is for the LIRCDEV checking. With bash -n, we need to quote
the variable, or it will always be true. So if test_lirc_mode2_user was
not run, just exit with skip code.
Fixes: 6bdd533cee ("bpf: add selftest for lirc_mode2 type program")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220321024149.157861-1-liuhangbin@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4c9fe0ed4a13e25e43fcd44d9f89bc19ba8fbb7 ]
The helper macro that records an error in BPF programs that exercise sock
fields access has been inadvertently broken by adaptation work that
happened in commit b18c1f0aa4 ("bpf: selftest: Adapt sock_fields test to
use skel and global variables").
BPF_NOEXIST flag cannot be used to update BPF_MAP_TYPE_ARRAY. The operation
always fails with -EEXIST, which in turn means the error never gets
recorded, and the checks for errors always pass.
Revert the change in update flags.
Fixes: b18c1f0aa4 ("bpf: selftest: Adapt sock_fields test to use skel and global variables")
Signed-off-by: Jakub Sitnicki <jakub@cloudflare.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20220317113920.1068535-2-jakub@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d23a8720327d33616f584d76c80824bfa4699be6 ]
In test_lwt_ip_encap, the ingress IPv6 encap test failed from time to
time. The failure occured when an IPv4 ping through the IPv6 GRE
encapsulation did not receive a reply within the timeout. The IPv4 ping
and the IPv6 ping in the test used different timeouts (1 sec for IPv4
and 6 sec for IPv6), probably taking into account that IPv6 might need
longer to successfully complete. However, when IPv4 pings (with the
short timeout) are encapsulated into the IPv6 tunnel, the delays of IPv6
apply.
The actual reason for the long delays with IPv6 was that the IPv6
neighbor discovery sometimes did not complete in time. This was caused
by the outgoing interface only having a tentative link local address,
i.e., not having completed DAD for that lladdr. The ND was successfully
retried after 1 sec but that was too late for the ping timeout.
The IPv6 addresses for the test were already added with nodad. However,
for the lladdrs, DAD was still performed. We now disable DAD in the test
netns completely and just assume that the two lladdrs on each veth pair
do not collide. This removes all the delays for IPv6 traffic in the
test.
Without the delays, we can now also reduce the delay of the IPv6 ping to
1 sec. This makes the whole test complete faster because we don't need
to wait for the excessive timeout for each IPv6 ping that is supposed
to fail.
Fixes: 0fde56e438 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/4987d549d48b4e316cd5b3936de69c8d4bc75a4f.1646305899.git.fmaurer@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9c6e6a80ee741adf6cb3cfd8eef7d1554f91fceb ]
xsk_umem__create() does mmap for fill/comp rings, but xsk_umem__delete()
doesn't do the unmap. This works fine for regular cases, because
xsk_socket__delete() does unmap for the rings. But for the case that
xsk_socket__create_shared() fails, umem rings are not unmapped.
fill_save/comp_save are checked to determine if rings have already be
unmapped by xsk. If fill_save and comp_save are NULL, it means that the
rings have already been used by xsk. Then they are supposed to be
unmapped by xsk_socket__delete(). Otherwise, xsk_umem__delete() does the
unmap.
Fixes: 2f6324a393 ("libbpf: Support shared umems between queues and devices")
Signed-off-by: Cheng Li <lic121@chinatelecom.cn>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220301132623.GA19995@vscode.7~
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4226961b0019b2e1612029e8950a9e911affc995 ]
Currently if a declaration appears in the BTF before the definition, the
definition is dumped as a conflicting name, e.g.:
$ bpftool btf dump file vmlinux format raw | grep "'unix_sock'"
[81287] FWD 'unix_sock' fwd_kind=struct
[89336] STRUCT 'unix_sock' size=1024 vlen=14
$ bpftool btf dump file vmlinux format c | grep "struct unix_sock"
struct unix_sock;
struct unix_sock___2 { <--- conflict, the "___2" is unexpected
struct unix_sock___2 *unix_sk;
This causes a compilation error if the dump output is used as a header file.
Fix it by skipping declaration when counting duplicated type names.
Fixes: 351131b51c ("libbpf: add btf_dump API for BTF-to-C conversion")
Signed-off-by: Xu Kuohai <xukuohai@huawei.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20220301053250.1464204-2-xukuohai@huawei.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a32ea51a3f17ce6524c9fc19d311e708331c8b5f ]
When I checked the code in skeleton header file generated with my own
bpf prog, I found there may be possible NULL pointer dereference when
destroying skeleton. Then I checked the in-tree bpf progs, finding that is
a common issue. Let's take the generated samples/bpf/xdp_redirect_cpu.skel.h
for example. Below is the generated code in
xdp_redirect_cpu__create_skeleton():
xdp_redirect_cpu__create_skeleton
struct bpf_object_skeleton *s;
s = (struct bpf_object_skeleton *)calloc(1, sizeof(*s));
if (!s)
goto error;
...
error:
bpf_object__destroy_skeleton(s);
return -ENOMEM;
After goto error, the NULL 's' will be deferenced in
bpf_object__destroy_skeleton().
We can simply fix this issue by just adding a NULL check in
bpf_object__destroy_skeleton().
Fixes: d66562fba1 ("libbpf: Add BPF object skeleton support")
Signed-off-by: Yafang Shao <laoar.shao@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20220108134739.32541-1-laoar.shao@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ef696f93ed9778d570bd5ac58414421cdd4f1aab ]
The $(CC) variable used in Makefiles could contain several arguments
such as "ccache gcc". These need to be passed as a single string to
check_cc.sh, otherwise only the first argument will be used as the
compiler command. Without quotes, the $(CC) variable is passed as
distinct arguments which causes the script to fail to build trivial
programs.
Fix this by adding quotes around $(CC) when calling check_cc.sh to pass
the whole string as a single argument to the script even if it has
several words such as "ccache gcc".
Link: https://lkml.kernel.org/r/d0d460d7be0107a69e3c52477761a6fe694c1840.1646991629.git.guillaume.tucker@collabora.com
Fixes: e9886ace22 ("selftests, x86: Rework x86 target architecture detection")
Signed-off-by: Guillaume Tucker <guillaume.tucker@collabora.com>
Tested-by: "kernelci.org bot" <bot@kernelci.org>
Reviewed-by: Guenter Roeck <groeck@google.com>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Borislav Petkov <bp@suse.de>
Cc: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b06e15ebd5bfb670f93c7f11a29b8299c1178bc6 ]
Add check to test if CC has a string. CC can have multiple sub-strings
like "ccache gcc". Erorr pops up if it is treated as single string and
double quotes are used around it. This can be fixed by removing the
quotes and not treating CC as a single string.
Fixes: e9886ace22 ("selftests, x86: Rework x86 target architecture detection")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220214184109.3739179-2-usama.anjum@collabora.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32f1b53fe8f03d962423ba81f8e92af5839814da ]
virtio_test hangs on __vring_new_virtqueue() because `vqs_list_lock`
is not initialized.
Let's initialize it in vdev_info_init().
Signed-off-by: Stefano Garzarella <sgarzare@redhat.com>
Link: https://lore.kernel.org/r/20220118150631.167015-1-sgarzare@redhat.com
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3cf6a32f3f2a45944dd5be5c6ac4deb46bcd3bee upstream.
Before this patch, the symbol end address fixup to be called, needed two
conditions being met:
if (prev->end == prev->start && prev->end != curr->start)
Where
"prev->end == prev->start" means that prev is zero-long
(and thus needs a fixup)
and
"prev->end != curr->start" means that fixup hasn't been applied yet
However, this logic is incorrect in the following situation:
*curr = {rb_node = {__rb_parent_color = 278218928,
rb_right = 0x0, rb_left = 0x0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 40, type = 2 '\002',
binding = 0 '\000', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1159739e "kprobe_optinsn_page\t[__builtin__kprobes]"}
*prev = {rb_node = {__rb_parent_color = 278219041,
rb_right = 0x109548b0, rb_left = 0x109547c0},
start = 0xc000000000062354,
end = 0xc000000000062354, namelen = 12, type = 2 '\002',
binding = 1 '\001', idle = 0 '\000', ignore = 0 '\000',
inlined = 0 '\000', arch_sym = 0 '\000', annotate2 = false,
name = 0x1095486e "optinsn_slot"}
In this case, prev->start == prev->end == curr->start == curr->end,
thus the condition above thinks that "we need a fixup due to zero
length of prev symbol, but it has been probably done, since the
prev->end == curr->start", which is wrong.
After the patch, the execution path proceeds to arch__symbols__fixup_end
function which fixes up the size of prev symbol by adding page_size to
its end offset.
Fixes: 3b01a413c1 ("perf symbols: Improve kallsyms symbol end addr calculation")
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
Cc: Athira Jajeev <atrajeev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Madhavan Srinivasan <maddy@linux.ibm.com>
Link: http://lore.kernel.org/lkml/20220317135536.805-1-mpetlan@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b773827e361952b3f53ac6fa4c4e39ccd632102e ]
The error message when I build vm tests on debian10 (GLIBC 2.28):
userfaultfd.c: In function `userfaultfd_pagemap_test':
userfaultfd.c:1393:37: error: `MADV_PAGEOUT' undeclared (first use
in this function); did you mean `MADV_RANDOM'?
if (madvise(area_dst, test_pgsize, MADV_PAGEOUT))
^~~~~~~~~~~~
MADV_RANDOM
This patch includes these newer definitions from UAPI linux/mman.h, is
useful to fix tests build on systems without these definitions in glibc
sys/mman.h.
Link: https://lkml.kernel.org/r/20220227055330.43087-2-zhouchengming@bytedance.com
Signed-off-by: Chengming Zhou <zhouchengming@bytedance.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fda153c89af344d21df281009a9d046cf587ea0f ]
Running the memfd script ./run_hugetlbfs_test.sh will often end in error
as follows:
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-FUTURE-WRITE
memfd-hugetlb: SEAL-SHRINK
fallocate(ALLOC) failed: No space left on device
./run_hugetlbfs_test.sh: line 60: 166855 Aborted (core dumped) ./memfd_test hugetlbfs
opening: ./mnt/memfd
fuse: DONE
If no hugetlb pages have been preallocated, run_hugetlbfs_test.sh will
allocate 'just enough' pages to run the test. In the SEAL-FUTURE-WRITE
test the mfd_fail_write routine maps the file, but does not unmap. As a
result, two hugetlb pages remain reserved for the mapping. When the
fallocate call in the SEAL-SHRINK test attempts allocate all hugetlb
pages, it is short by the two reserved pages.
Fix by making sure to unmap in mfd_fail_write.
Link: https://lkml.kernel.org/r/20220219004340.56478-1-mike.kravetz@oracle.com
Signed-off-by: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Joel Fernandes <joel@joelfernandes.org>
Cc: Shuah Khan <shuah@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a7e75016a0753c24d6c995bc02501ae35368e333 ]
Add a test that validates that timer value is not overwritten when doing
a copy_map_value call in the kernel. Without the prior fix, this test
triggers a crash.
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20220209070324.1093182-3-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18dfc667550fe9c032a6dcc3402b50e691e18029 ]
The cleanup() function takes care of killing processes launched by the
test functions. It relies on variables like ${tcpdump_pids} to get the
relevant PIDs. But tests are run in their own subshell, so updated
*_pids values are invisible to other shells. Therefore cleanup() never
sees any process to kill:
$ ./tools/testing/selftests/net/pmtu.sh -t pmtu_ipv4_exception
TEST: ipv4: PMTU exceptions [ OK ]
TEST: ipv4: PMTU exceptions - nexthop objects [ OK ]
$ pgrep -af tcpdump
6084 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6085 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6086 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6087 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6088 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6089 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6090 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6091 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
6228 tcpdump -s 0 -i veth_A-R1 -w pmtu_ipv4_exception_veth_A-R1.pcap
6229 tcpdump -s 0 -i veth_R1-A -w pmtu_ipv4_exception_veth_R1-A.pcap
6230 tcpdump -s 0 -i veth_R1-B -w pmtu_ipv4_exception_veth_R1-B.pcap
6231 tcpdump -s 0 -i veth_B-R1 -w pmtu_ipv4_exception_veth_B-R1.pcap
6232 tcpdump -s 0 -i veth_A-R2 -w pmtu_ipv4_exception_veth_A-R2.pcap
6233 tcpdump -s 0 -i veth_R2-A -w pmtu_ipv4_exception_veth_R2-A.pcap
6234 tcpdump -s 0 -i veth_R2-B -w pmtu_ipv4_exception_veth_R2-B.pcap
6235 tcpdump -s 0 -i veth_B-R2 -w pmtu_ipv4_exception_veth_B-R2.pcap
Fix this by running cleanup() in the context of the test subshell.
Now that each test cleans the environment after completion, there's no
need for calling cleanup() again when the next test starts. So let's
drop it from the setup() function. This is okay because cleanup() is
also called when pmtu.sh starts, so even the first test starts in a
clean environment.
Also, use tcpdump's immediate mode. Otherwise it might not have time to
process buffered packets, resulting in missing packets or even empty
pcap files for short tests.
Note: PAUSE_ON_FAIL is still evaluated before cleanup(), so one can
still inspect the test environment upon failure when using -p.
Fixes: a92a0a7b8e ("selftests: pmtu: Simplify cleanup and namespace names")
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d45476d9832409371537013ebdd8dc1a7781f97a upstream.
The RETPOLINE_AMD name is unfortunate since it isn't necessarily
AMD only, in fact Hygon also uses it. Furthermore it will likely be
sufficient for some Intel processors. Therefore rename the thing to
RETPOLINE_LFENCE to better describe what it is.
Add the spectre_v2=retpoline,lfence option as an alias to
spectre_v2=retpoline,amd to preserve existing setups. However, the output
of /sys/devices/system/cpu/vulnerabilities/spectre_v2 will be changed.
[ bp: Fix typos, massage. ]
Co-developed-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Borislav Petkov <bp@suse.de>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
[fllinden@amazon.com: backported to 5.10]
Signed-off-by: Frank van der Linden <fllinden@amazon.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dc9752075341e7beb653e37c6f4a3723074dc8bc upstream.
The test adds tc filters and checks how many of them were offloaded by
grepping for 'in_hw'.
iproute2 commit f4cd4f127047 ("tc: add skip_hw and skip_sw to control
action offload") added offload indication to tc actions, producing the
following output:
$ tc filter show dev swp2 ingress
...
filter protocol ipv6 pref 1000 flower chain 0 handle 0x7c0
eth_type ipv6
dst_ip 2001:db8:1::7bf
skip_sw
in_hw in_hw_count 1
action order 1: police 0x7c0 rate 10Mbit burst 100Kb mtu 2Kb action drop overhead 0b
ref 1 bind 1
not_in_hw
used_hw_stats immediate
The current grep expression matches on both 'in_hw' and 'not_in_hw',
resulting in incorrect results.
Fix that by using JSON output instead.
Fixes: 5061e77326 ("selftests: mlxsw: Add scale test for tc-police")
Signed-off-by: Amit Cohen <amcohen@nvidia.com>
Reviewed-by: Petr Machata <petrm@nvidia.com>
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 21bffcb76ee2fbafc7d5946cef10abc9df5cfff7 ]
seccomp_bpf failed on tests 47 global.user_notification_filter_empty
and 48 global.user_notification_filter_empty_threaded when it's
tested on updated kernel but with old kernel headers. Because old
kernel headers don't have definition of macro __NR_clone3 which is
required for these two tests. Since under selftests/, we can install
headers once for all tests (the default INSTALL_HDR_PATH is
usr/include), fix it by adding usr/include to the list of directories
to be searched. Use "-isystem" to indicate it's a system directory as
the real kernel headers directories are.
Signed-off-by: Sherry Yang <sherry.yang@oracle.com>
Tested-by: Sherry Yang <sherry.yang@oracle.com>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 61d06f01f9710b327a53492e5add9f972eb909b3 upstream.
bpf_msg_push_data may return a non-zero value to indicate an error. The
return value should be checked to prevent undetected errors.
To indicate an error, the BPF programs now perform a different action
than their intended one to make the userspace test program notice the
error, i.e., the programs supposed to pass/redirect drop, the program
supposed to drop passes.
Fixes: 84fbfe026a ("bpf: test_sockmap add options to use msg_push_data")
Signed-off-by: Felix Maurer <fmaurer@redhat.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/89f767bb44005d6b4dd1f42038c438f76b3ebfad.1644601294.git.fmaurer@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69560e366fc4d5fca7bebb0e44edbfafc8bcaf05 upstream.
When perf_data__create_dir() fails, it calls close_dir(), but
perf_session__delete() also calls close_dir() and since dir.version and
dir.nr were initialized by perf_data__create_dir(), a double free occurs.
This patch moves the initialization of dir.version and dir.nr after
successful initialization of dir.files, that prevents double freeing.
This behavior is already implemented in perf_data__open_dir().
Fixes: 1455206311 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Alexey Bayduraev <alexey.v.bayduraev@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Antonov <alexander.antonov@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Budankov <abudankov@huawei.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220218152341.5197-2-alexey.v.bayduraev@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e2aa5e650b07693477dff554053605976789fd68 ]
These are some trivial fixups, which were needed to build the tests with
clang and -Werror. The following issues are fixed:
- Remove various unused variables.
- In child_poll_leader_exit_test, clang isn't smart enough to realize
syscall(SYS_exit, 0) won't return, so it complains we never return
from a non-void function. Add an extra exit(0) to appease it.
- In test_pidfd_poll_leader_exit, ret may be branched on despite being
uninitialized, if we have !use_waitpid. Initialize it to zero to get
the right behavior in that case.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4cbd93c3c110447adc66cb67c08af21f939ae2d7 ]
When running the pidfd_fdinfo_test on arm64, it fails for me. After some
digging, the reason is that the child exits due to SIGBUS, because it
overflows the 1024 byte stack we've reserved for it.
To fix the issue, increase the stack size to 8192 bytes (this number is
somewhat arbitrary, and was arrived at through experimentation -- I kept
doubling until the failure no longer occurred).
Also, let's make the issue easier to debug. wait_for_pid() returns an
ambiguous value: it may return -1 in all of these cases:
1. waitpid() itself returned -1
2. waitpid() returned success, but we found !WIFEXITED(status).
3. The child process exited, but it did so with a -1 exit code.
There's no way for the caller to tell the difference. So, at least log
which occurred, so the test runner can debug things.
While debugging this, I found that we had !WIFEXITED(), because the
child exited due to a signal. This seems like a reasonably common case,
so also print out whether or not we have WIFSIGNALED(), and the
associated WTERMSIG() (if any). This lets us see the SIGBUS I'm fixing
clearly when it occurs.
Finally, I'm suspicious of allocating the child's stack on our stack.
man clone(2) suggests that the correct way to do this is with mmap(),
and in particular by setting MAP_STACK. So, switch to doing it that way
instead.
Signed-off-by: Axel Rasmussen <axelrasmussen@google.com>
Acked-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a7e793a867ae312cecdeb6f06cceff98263e75dd upstream.
non-regular file needs to be compiled and then copied to the output
directory. Remove it from TEST_PROGS and add it to TEST_GEN_PROGS. This
removes error thrown by rsync when non-regular object isn't found:
rsync: [sender] link_stat "/linux/tools/testing/selftests/exec/non-regular" failed: No such file or directory (2)
rsync error: some files/attrs were not transferred (see previous errors) (code 23) at main.c(1333) [sender=3.2.3]
Fixes: 0f71241a8e ("selftests/exec: add file type errno tests")
Reported-by: "kernelci.org bot" <bot@kernelci.org>
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 31ded1535e3182778a1d0e5c32711f55da3bc512 upstream.
This was detected by the gcc in Fedora Rawhide's gcc:
50 11.01 fedora:rawhide : FAIL gcc version 12.0.1 20220205 (Red Hat 12.0.1-0) (GCC)
inlined from 'bpf__config_obj' at util/bpf-loader.c:1242:9:
util/bpf-loader.c:1225:34: error: pointer 'map_opt' may be used after 'free' [-Werror=use-after-free]
1225 | *key_scan_pos += strlen(map_opt);
| ^~~~~~~~~~~~~~~
util/bpf-loader.c:1223:9: note: call to 'free' here
1223 | free(map_name);
| ^~~~~~~~~~~~~~
cc1: all warnings being treated as errors
So do the calculations on the pointer before freeing it.
Fixes: 04f9bf2bac ("perf bpf-loader: Add missing '*' for key_scan_pos")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lore.kernel.org/lkml/Yg1VtQxKrPpS3uNA@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 52a9dab6d892763b2a8334a568bd4e2c1a6fde66 upstream.
GCC 12 correctly reports a potential use-after-free condition in the
xrealloc helper. Fix the warning by avoiding an implicit "free(ptr)"
when size == 0:
In file included from help.c:12:
In function 'xrealloc',
inlined from 'add_cmdname' at help.c:24:2: subcmd-util.h:56:23: error: pointer may be used after 'realloc' [-Werror=use-after-free]
56 | ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
subcmd-util.h:58:31: error: pointer may be used after 'realloc' [-Werror=use-after-free]
58 | ret = realloc(ptr, 1);
| ^~~~~~~~~~~~~~~
subcmd-util.h:52:21: note: call to 'realloc' here
52 | void *ret = realloc(ptr, size);
| ^~~~~~~~~~~~~~~~~~
Fixes: 2f4ce5ec1d ("perf tools: Finalize subcmd independence")
Reported-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Signed-off-by: Kees Kook <keescook@chromium.org>
Tested-by: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Tested-by: Justin M. Forbes <jforbes@fedoraproject.org>
Acked-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-hardening@vger.kernel.org
Cc: Valdis Klētnieks <valdis.kletnieks@vt.edu>
Link: http://lore.kernel.org/lkml/20220213182443.4037039-1-keescook@chromium.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2e71ec1a725a794a16e3862791ed43fe5ba6a06b upstream.
When the nft_concat_range test failed, it exit 1 in the code
specifically.
But when part of, or all of the test passed, it will failed the
[ ${passed} -eq 0 ] check and thus exit with 1, which is the same
exit value with failure result. Fix it by exit 0 when passed is not 0.
Fixes: 611973c1e0 ("selftests: netfilter: Introduce tests for sets with range concatenation")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit dae1d8ac31896988e7313384c0370176a75e9b45 ]
Report mincore.check_file_mmap as SKIP instead of FAIL if the underlying
filesystem lacks support of O_TMPFILE or fallocate since such failures
are not really related to mincore functionality.
Cc: Ricardo Cañuelo <ricardo.canuelo@collabora.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea3396725aa143dd42fe388cb67e44c90d2fb719 ]
Add a dependency on header helpers.h to the main target; while at that add
to helpers.h also a missing include for bool types.
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e051cdf655fa016692008a446a060eff06222bb5 ]
In E_func() macro, on error, print also errno in order to aid debugging.
Cc: Aleksa Sarai <cyphar@cyphar.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01dabed20573804750af5c7bf8d1598a6bf7bf6e ]
If zram-generator package is installed and works, then we can not remove
zram module because zram swap is being used. This case needs a clean zram
environment, change this test by using hot_add/hot_remove interface. So
even zram device is being used, we still can add zram device and remove
them in cleanup.
The two interface was introduced since kernel commit 6566d1a32bf7("zram:
add dynamic device add/remove functionality") in v4.2-rc1. If kernel
supports these two interface, we use hot_add/hot_remove to slove this
problem, if not, just check whether zram is being used or built in, then
skip it on old kernel.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d18da7ec3719559d6e74937266d0416e6c7e0b31 ]
zram01 uses `free -m` to measure zram memory usage. The results are no
sense because they are polluted by all running processes on the system.
We Should only calculate the free memory delta for the current process.
So use the third field of /sys/block/zram<id>/mm_stat to measure memory
usage instead. The file is available since kernel 4.1.
orig_data_size(first): uncompressed size of data stored in this disk.
compr_data_size(second): compressed size of data stored in this disk
mem_used_total(third): the amount of memory allocated for this disk
Also remove useless zram cleanup call in zram_fill_fs and so we don't
need to cleanup zram twice if fails.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc4eb486a59d70bd35cf1209f0e68c2d8b979193 ]
Since commit 43209ea2d1 ("zram: remove max_comp_streams internals"), zram
has switched to per-cpu streams. Even kernel still keep this interface for
some reasons, but writing to max_comp_stream doesn't take any effect. So
skip it on newer kernel ie 4.7.
The code that comparing kernel version is from xfstests testsuite ext4/053.
Signed-off-by: Yang Xu <xuyang2018.jy@fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 92d25637a3a45904292c93f1863c6bbda4e3e38f ]
We have some many cases that will create child process as well, such as
pidfd_wait. Previously, we will signal/kill the parent process when it
is time out, but this signal will not be sent to its child process. In
such case, if child process doesn't terminate itself, ksefltest framework
will hang forever.
Here we group all its child processes so that kill() can signal all of
them in timeout.
Fixed change log: Shuah Khan <skhan@linuxfoundation.org>
Suggested-by: yang xu <xuyang2018.jy@cn.fujitsu.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f034cc1301e7d83d4ec428dd6b8ffb57ca446efb ]
The timeout setting for the rtc kselftest is currently 90 seconds. This
setting is used by the kselftest runner to stop running a test if it
takes longer than the assigned value.
However, two of the test cases inside rtc set alarms. These alarms are
set to the next beginning of the minute, so each of these test cases may
take up to, in the worst case, 60 seconds.
In order to allow for all test cases in rtc to run, even in the worst
case, when using the kselftest runner, the timeout value should be
increased to at least 120. Set it to 180, so there's some additional
slack.
Correct operation can be tested by running the following command right
after the start of a minute (low second count), and checking that all
test cases run:
./run_kselftest.sh -c rtc
Signed-off-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Acked-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit eda0cf1202acf1ef47f93d8f92d4839213431424 upstream.
Add a specific test for the reload issue fixed with
commit 23c54263efd7cb ("netfilter: nft_set_pipapo: allocate pcpu scratch maps on clone").
Add to set, then flush set content + restore without other add/remove in
the transaction.
On kernels before the fix, this test case fails:
net,mac with reload [FAIL]
Signed-off-by: Florian Westphal <fw@strlen.de>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7f3bdbc3f13146eb9d07de81ea71f551587a384b upstream.
When building with 'make -s', there is some output from resolve_btfids:
$ make -sj"$(nproc)" oldconfig prepare
MKDIR .../tools/bpf/resolve_btfids/libbpf/
MKDIR .../tools/bpf/resolve_btfids//libsubcmd
LINK resolve_btfids
Silent mode means that no information should be emitted about what is
currently being done. Use the $(silent) variable from Makefile.include
to avoid defining the msg macro so that there is no information printed.
Fixes: fbbb68de80 ("bpf: Add resolve_btfids tool to resolve BTF IDs in ELF object")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20220201212503.731732-1-nathan@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b9199181a9ef8252e47e207be8c23e1f50662620 upstream.
Recursive make commands should always use the variable MAKE, not the
explicit command name ‘make’. This has benefits and removes the
following warning when multiple jobs are used for the build:
make[2]: warning: jobserver unavailable: using -j1. Add '+' to parent make rule.
Fixes: a8ba798bc8 ("selftests: enable O and KBUILD_OUTPUT")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: André Almeida <andrealmeid@collabora.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 908a26e139e8cf21093acc56d8e90ddad2ad1eff upstream.
pipe named FIFO special file is being created in execveat.c to perform
some tests. Makefile doesn't need to do anything with the pipe. When it
isn't found, Makefile generates the following build error:
make: *** No rule to make target
'../tools/testing/selftests/exec/pipe', needed by 'all'. Stop.
pipe is created and removed during test run-time.
Amended change log to add pipe remove info:
Shuah Khan <skhan@linuxfoundation.org>
Fixes: 61016db15b ("selftests/exec: Verify execve of non-regular files fail")
Signed-off-by: Muhammad Usama Anjum <usama.anjum@collabora.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 87c01d57fa23de82fff593a7d070933d08755801 upstream.
hmm_range_fault() can be used instead of get_user_pages() for devices
which allow faulting however unlike get_user_pages() it will return an
error when used on a VM_MIXEDMAP range.
To make hmm_range_fault() more closely match get_user_pages() remove
this restriction. This requires dealing with the !ARCH_HAS_PTE_SPECIAL
case in hmm_vma_handle_pte(). Rather than replicating the logic of
vm_normal_page() call it directly and do a check for the zero pfn
similar to what get_user_pages() currently does.
Also add a test to hmm selftest to verify functionality.
Link: https://lkml.kernel.org/r/20211104012001.2555676-1-apopple@nvidia.com
Fixes: da4c3c735e ("mm/hmm/mirror: helper to snapshot CPU page table")
Signed-off-by: Alistair Popple <apopple@nvidia.com>
Reviewed-by: Jason Gunthorpe <jgg@nvidia.com>
Cc: Jerome Glisse <jglisse@redhat.com>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Zi Yan <ziy@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Felix Kuehling <Felix.Kuehling@amd.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4624f199327a704dd1069aca1c3cadb8f2a28c6f upstream.
Because of commit bf794bf52a ("powerpc/kprobes: Fix kallsyms
lookup across powerpc ABIv1 and ABIv2"), in ppc64 ABIv1, our perf
command eliminates the need to use the prefix "." at the symbol name.
But when the command "perf probe -a schedule" is executed on ppc64
ABIv1, it obtains two symbol address information through /proc/kallsyms,
for example:
cat /proc/kallsyms | grep -w schedule
c000000000657020 T .schedule
c000000000d4fdb8 D schedule
The symbol "D schedule" is not a function symbol, and perf will print:
"p:probe/schedule _text+13958584"Failed to write event: Invalid argument
Therefore, when searching symbols from map and adding probe point for
them, a symbol type check is added. If the type of symbol is not a
function, skip it.
Fixes: bf794bf52a ("powerpc/kprobes: Fix kallsyms lookup across powerpc ABIv1 and ABIv2")
Signed-off-by: Zechuan Chen <chenzechuan1@huawei.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jianlin Lv <Jianlin.Lv@arm.com>
Cc: Jin Yao <yao.jin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.ibm.com>
Cc: Yang Jihong <yangjihong1@huawei.com>
Link: https://lore.kernel.org/r/20211228111338.218602-1-chenzechuan1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3606c0e1a1050d397ad759a62607e419fd8b0ccb upstream.
A previous patch preventing "attr->sample_period" values from being
overridden in pfm events changed a related behaviour in arm-spe.
Before said patch:
perf record -c 10000 -e arm_spe_0// -- sleep 1
Would yield an SPE event with period=10000. After the patch, the period
in "-c 10000" was being ignored because the arm-spe code initializes
sample_period to a non-zero value.
This patch restores the previous behaviour for non-libpfm4 events.
Fixes: ae5dcc8abe (“perf record: Prevent override of attr->sample_period for libpfm4 events”)
Reported-by: Chase Conklin <chase.conklin@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20220118144054.2541-1-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 48f5aef4c458c19ab337eed8c95a6486cc014aa3 upstream.
Bpftool's Makefile, and the Makefile for its documentation, both include
scripts/utilities.mak, but they use none of the items defined in this
file. Remove the includes.
Fixes: 71bb428fe2 ("tools: bpf: add bpftool")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211110114632.24537-3-quentin@isovalent.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3c42e9542050d49610077e083c7c3f5fd5e26820 ]
A mis-match between reported and actual mitigation is not restricted to the
Vulnerable case. The guest might also report the mitigation as "Software
count cache flush" and the host will still mitigate with branch cache
disabled.
So, instead of skipping depending on the detected mitigation, simply skip
whenever the detected miss_percent is the expected one for a fully
mitigated system, that is, above 95%.
Signed-off-by: Thadeu Lima de Souza Cascardo <cascardo@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20211207130557.40566-1-cascardo@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e5992f373c6eed6d09e5858e9623df1259b3ce30 ]
Commit 32f6e5da83 ("selftests/ftrace: Add kprobe profile testcase")
added a new kprobes testcase, but has a description which does not
describe what the test case is doing and is duplicating the description
of another test case.
Therefore change the test case description, so it is unique and then
allows easily to tell which test case actually passed or failed.
Reported-by: Alexander Egorenkov <egorenar@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8c7a95520184b6677ca6075e12df9c208d57d088 ]
skb_ctx selftest didn't close bpf_object implicitly allocated by
bpf_prog_test_load() helper. Fix the problem by explicitly calling
bpf_object__close() at the end of the test.
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Hengqi Chen <hengqi.chen@gmail.com>
Link: https://lore.kernel.org/bpf/20211107165521.9240-10-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a1a0b0364ad291bd8e509da104ac8b5b1afec5d ]
The output of bpftool prog tracelog is currently buffered, which is
inconvenient when piping the output into other commands. A simple
tracelog | grep will typically not display anything. This patch fixes it
by enabling line buffering on stdout for the whole bpftool binary.
Fixes: 30da46b5dc ("tools: bpftool: add a command to dump the trace pipe")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Paul Chaignon <paul@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211220214528.GA11706@Mem
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3abedf4646fdc0036fcb8ebbc3b600667167fafe ]
Test can fail either immediately when ASSERT() failed or at the
end if one or more EXPECT() was not met. The exact return code
is decided based on the number of successful ASSERT()s.
If test has no ASSERT()s, however, the return code will be 0,
as if the test did not fail. Start counting ASSERT()s from 1.
Fixes: 369130b631 ("selftests: Enhance kselftest_harness.h to print which assert failed")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a531b0c23c0fc68ad758cc31a74cf612a4dafeb0 ]
Building selftests/clone3 with clang warns about enumeration not handled
in switch case:
clone3.c:54:10: warning: enumeration value 'CLONE3_ARGS_NO_TEST' not handled in switch [-Wswitch]
switch (test_mode) {
^
Add the missing switch case with a comment.
Fixes: 17a810699c ("selftests: add tests for clone3()")
Signed-off-by: Anders Roxell <anders.roxell@linaro.org>
Acked-by: Christian Brauner <christian.brauner@ubuntu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit de0244ae40ae91145faaf164a4252347607c3711 upstream.
Ammar Faizi reported that our exit code handling is wrong. We truncate
it to the lowest 8 bits but the syscall itself is expected to take a
regular 32-bit signed integer, not an unsigned char. It's the kernel
that later truncates it to the lowest 8 bits. The difference is visible
in strace, where the program below used to show exit(255) instead of
exit(-1):
int main(void)
{
return -1;
}
This patch applies the fix to all archs. x86_64, i386, arm64, armv7 and
mips were all tested and confirmed to work fine now. Risc-v was not
tested but the change is trivial and exactly the same as for other archs.
Reported-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ebbe0d8a449d183fa43b42d84fcb248e25303985 upstream.
After re-checking in the spec and comparing stack offsets with glibc,
The last pushed argument must be 16-byte aligned (i.e. aligned before the
call) so that in the callee esp+4 is multiple of 16, so the principle is
the 32-bit equivalent to what Ammar fixed for x86_64. It's possible that
32-bit code using SSE2 or MMX could have been affected. In addition the
frame pointer ought to be zero at the deepest level.
Link: https://gitlab.com/x86-psABIs/i386-ABI/-/wikis/Intel386-psABI
Cc: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 937ed91c712273131de6d2a02caafd3ee84e0c72 upstream.
Before this patch, the `_start` function looks like this:
```
0000000000001170 <_start>:
1170: pop %rdi
1171: mov %rsp,%rsi
1174: lea 0x8(%rsi,%rdi,8),%rdx
1179: and $0xfffffffffffffff0,%rsp
117d: sub $0x8,%rsp
1181: call 1000 <main>
1186: movzbq %al,%rdi
118a: mov $0x3c,%rax
1191: syscall
1193: hlt
1194: data16 cs nopw 0x0(%rax,%rax,1)
119f: nop
```
Note the "and" to %rsp with $-16, it makes the %rsp be 16-byte aligned,
but then there is a "sub" with $0x8 which makes the %rsp no longer
16-byte aligned, then it calls main. That's the bug!
What actually the x86-64 System V ABI mandates is that right before the
"call", the %rsp must be 16-byte aligned, not after the "call". So the
"sub" with $0x8 here breaks the alignment. Remove it.
An example where this rule matters is when the callee needs to align
its stack at 16-byte for aligned move instruction, like `movdqa` and
`movaps`. If the callee can't align its stack properly, it will result
in segmentation fault.
x86-64 System V ABI also mandates the deepest stack frame should be
zero. Just to be safe, let's zero the %rbp on startup as the content
of %rbp may be unspecified when the program starts. Now it looks like
this:
```
0000000000001170 <_start>:
1170: pop %rdi
1171: mov %rsp,%rsi
1174: lea 0x8(%rsi,%rdi,8),%rdx
1179: xor %ebp,%ebp # zero the %rbp
117b: and $0xfffffffffffffff0,%rsp # align the %rsp
117f: call 1000 <main>
1184: movzbq %al,%rdi
1188: mov $0x3c,%rax
118f: syscall
1191: hlt
1192: data16 cs nopw 0x0(%rax,%rax,1)
119d: nopl (%rax)
```
Cc: Bedirhan KURT <windowz414@gnuweeb.org>
Cc: Louvian Lyndal <louvianlyndal@gmail.com>
Reported-by: Peter Cordes <peter@cordes.ca>
Signed-off-by: Ammar Faizi <ammar.faizi@students.amikom.ac.id>
[wt: I did this on purpose due to a misunderstanding of the spec, other
archs will thus have to be rechecked, particularly i386]
Cc: stable@vger.kernel.org
Signed-off-by: Willy Tarreau <w@1wt.eu>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 9c1952aeaa98b3cfc49e2a79cb2c7d6a674213e9 ]
udpgso_bench_tx call setup_sockaddr() for dest address before
parsing all arguments, if we specify "-p ${dst_port}" after "-D ${dst_ip}",
then ${dst_port} will be ignored, and using default cfg_port 8000.
This will cause test case "multiple GRO socks" failed in udpgro.sh.
Setup sockaddr after parsing all arguments.
Fixes: 3a687bef14 ("selftests: udp gso benchmark")
Signed-off-by: Jianguo Wu <wujianguo@chinatelecom.cn>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/ff620d9f-5b52-06ab-5286-44b945453002@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5471d5226c3b39b3d2f7011c082d5715795bd65c ]
The below referenced commit correctly updated the computation of number
of segments (gso_size) by using only the gso payload size and
removing the header lengths.
With this change the regression test started failing. Update
the tests to match this new behavior.
Both IPv4 and IPv6 tests are updated, as a separate patch in this series
will update udp_v6_send_skb to match this change in udp_send_skb.
Fixes: 158390e45612 ("udp: using datalen to cap max gso segments")
Signed-off-by: Coco Li <lixiaoyan@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://lore.kernel.org/r/20211223222441.2975883-2-lixiaoyan@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c2fcbf81c332b42382a0c439bfe2414a241e4f5b ]
The libbpf CI reported occasional failure in btf_skc_cls_ingress:
test_syncookie:FAIL:Unexpected syncookie states gen_cookie:80326634 recv_cookie:0
bpf prog error at line 97
"error at line 97" means the bpf prog cannot find the listening socket
when the final ack is received. It then skipped processing
the syncookie in the final ack which then led to "recv_cookie:0".
The problem is the userspace program did not do accept() and went
ahead to close(listen_fd) before the kernel (and the bpf prog) had
a chance to process the final ack.
The fix is to add accept() call so that the userspace will wait for
the kernel to finish processing the final ack first before close()-ing
everything.
Fixes: 9a856cae22 ("bpf: selftest: Add test_btf_skc_cls_ingress")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211216191630.466151-1-kafai@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 71da1aec215290e249d09c44c768df859f3a3bba ]
The recent GRE selftests defined NUM_NETIFS=10. If the users copy
forwarding.config.sample to forwarding.config directly, they will get
error "Command line is not complete" when run the GRE tests, because
create_netif_veth() failed with no interface name defined.
Fix it by extending the NETIFS with p9 and p10.
Fixes: 2800f24854 ("selftests: forwarding: Test multipath hashing on inner IP pkts for GRE tunnel")
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28a2686c185e84b6aa6a4d9c9a972360eb7ca266 ]
IPv6 allows binding a socket to a device then binding to an address
not on the device (__inet6_bind -> ipv6_chk_addr with strict flag
not set). Update the bind tests to reflect legacy behavior.
Fixes: 34d0302ab8 ("selftests: Add ipv6 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0f108ae4452025fef529671998f6c7f1c4526790 ]
Commit referenced below added negative socket bind tests for VRF. The
socket binds should fail since the address to bind to is in a VRF yet
the socket is not bound to the VRF or a device within it. Update the
expected return code to check for 1 (bind failure) so the test passes
when the bind fails as expected. Add a 'show_hint' comment to explain
why the bind is expected to fail.
Fixes: 75b2b2b3db ("selftests: Add ipv4 address bind tests to fcnal-test")
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7e0147592b5c4f9e2eb8c54a7857a56d4863f74e ]
Commit referenced below added configuration in the default VRF that
duplicates a VRF to check MD5 passwords are properly used and fail
when expected. That config should not be added all the time as it
can cause tests to pass that should not (by matching on default VRF
setup when it should not). Move the duplicate setup to a function
that is only called for the MD5 tests and add a cleanup function
to remove it after the MD5 tests.
Fixes: 5cad8bce26 ("fcnal-test: Add TCP MD5 tests for VRF")
Signed-off-by: David Ahern <dsahern@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 908fa88e420f30dde6d80f092795a18ec72ca6d3 ]
With the elevated 'KVM_CAP_MAX_VCPUS' value kvm_create_max_vcpus test
may hit RLIMIT_NOFILE limits:
# ./kvm_create_max_vcpus
KVM_CAP_MAX_VCPU_ID: 4096
KVM_CAP_MAX_VCPUS: 1024
Testing creating 1024 vCPUs, with IDs 0...1023.
/dev/kvm not available (errno: 24), skipping test
Adjust RLIMIT_NOFILE limits to make sure KVM_CAP_MAX_VCPUS fds can be
opened. Note, raising hard limit ('rlim_max') requires CAP_SYS_RESOURCE
capability which is generally not needed to run kvm selftests (but without
raising the limit the test is doomed to fail anyway).
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20211123135953.667434-1-vkuznets@redhat.com>
[Skip the test if the hard limit can be raised. - Paolo]
Reviewed-by: Sean Christopherson <seanjc@google.com>
Tested-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6665b8e4836caa8023cbc7e53733acd234969c8c upstream.
An error timestamp shows the last known timestamp for the queue, but this
is not updated on the error path. Fix by setting it.
Fixes: f4aa081949 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-8-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a882cc94971093e146ffa1163b140ad956236754 upstream.
FUP packets contain IP information, which makes them also an 'instruction'
event in 'hop' mode i.e. the itrace 'q' option. That wasn't happening, so
restructure the logic so that FUP events are added along with appropriate
'instruction' and 'branch' events.
Fixes: 7c1b16ba0e ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-7-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a32e6c5da599dbf49e60622a4dfb5b9b40ece029 upstream.
Code after label 'next:' in intel_pt_walk_trace() assumes 'err' is zero,
but it may not be, if arrived at via a 'goto'. Ensure it is zero.
Fixes: 7c1b16ba0e ("perf intel-pt: Add support for decoding FUP/TIP only")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-6-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c79ee2b2160909889df67c8801352d3e69d43a1a upstream.
An overflow (OVF packet) is treated as an error because it represents a
loss of trace data, but there is no loss of synchronization, so the packet
state should be INTEL_PT_STATE_IN_SYNC not INTEL_PT_STATE_ERR_RESYNC.
To support that, some additional variables must be reset, and the FUP
packet that may follow OVF is treated as an FUP event.
Fixes: f4aa081949 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-5-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4c761d805bb2d2ead1b9baaba75496152b394c80 upstream.
intel_pt_fup_event() assumes it can overwrite the state type if there has
been an FUP event, but this is an unnecessary and unexpected constraint on
callers.
Fix by touching only the state type flags that are affected by an FUP
event.
Fixes: a472e65fc4 ("perf intel-pt: Add decoder support for ptwrite and power event packets")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-4-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ad106a26aef3a95ac7ca88d033b431661ba346ce upstream.
When syncing, it may be that branch packet generation is not enabled at
that point, in which case there will not immediately be a control-flow
packet, so some packets before a control flow packet turns up, get
ignored. However, the decoder is in sync as soon as a PSB is found, so
the state should be set accordingly.
Fixes: f4aa081949 ("perf tools: Add Intel PT decoder")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-3-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 057ae59f5a1d924511beb1b09f395bdb316cfd03 upstream.
Packet generation enable (PGE) refers to whether control flow (COFI)
packets are being produced.
PGE may be false even when branch-tracing is enabled, due to being
out-of-context, or outside a filter address range. Fix some missing PGE
usage.
Fixes: 7c1b16ba0e ("perf intel-pt: Add support for decoding FUP/TIP only")
Fixes: 839598176b ("perf intel-pt: Allow decoding with branch tracing disabled")
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: stable@vger.kernel.org # v5.15+
Link: https://lore.kernel.org/r/20211210162303.2288710-2-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c29d9792607e67ed8a3f6e9db0d96836d885a8c5 upstream.
The space allowed for new attributes can be too small if existing header
information is large. That can happen, for example, if there are very
many CPUs, due to having an event ID per CPU per event being stored in the
header information.
Fix by adding the existing header.data_offset. Also increase the extra
space allowed to 8KiB and align to a 4KiB boundary for neatness.
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lore.kernel.org/lkml/20211125071457.2066863-1-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
[Adrian: Backport to v5.10]
Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When backporting 33b8aad21ac1 ("selftests: netfilter: add a
vrf+conntrack testcase") to this stable branch, the executable bits were
not properly set on the
tools/testing/selftests/netfilter/conntrack_vrf.sh file due to quilt not
honoring them.
Fix this up manually by setting the correct mode.
Reported-by: "Rantala, Tommi T. (Nokia - FI/Espoo)" <tommi.t.rantala@nokia.com>
Link: https://lore.kernel.org/r/234d7a6a81664610fdf21ac72730f8bd10d3f46f.camel@nokia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b560b21f71eb4ef9dfc7c8ec1d0e4d7f9aa54b51 upstream.
This commit adds BPF verifier selftests that cover all corner cases by
packet boundary checks. Specifically, 8-byte packet reads are tested at
the beginning of data and at the beginning of data_meta, using all kinds
of boundary checks (all comparison operators: <, >, <=, >=; both
permutations of operands: data + length compared to end, end compared to
data + length). For each case there are three tests:
1. Length is just enough for an 8-byte read. Length is either 7 or 8,
depending on the comparison.
2. Length is increased by 1 - should still pass the verifier. These
cases are useful, because they failed before commit 2fa7d94afc1a
("bpf: Fix the off-by-two error in range markings").
3. Length is decreased by 1 - should be rejected by the verifier.
Some existing tests are just renamed to avoid duplication.
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211207081521.41923-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f6071e5e3961eeb5300bd0901c9e128598730ae3 upstream.
Currently rp_filter tests in fib_tests.sh:fib_rp_filter_test() are
failing. ping sockets are bound to dummy1 using the "-I" option
(SO_BINDTODEVICE), but socket lookup is failing when receiving ping
replies, since the routing table thinks they belong to dummy0.
For example, suppose ping is using a SOCK_RAW socket for ICMP messages.
When receiving ping replies, in __raw_v4_lookup(), sk->sk_bound_dev_if
is 3 (dummy1), but dif (skb_rtable(skb)->rt_iif) says 2 (dummy0), so the
raw_sk_bound_dev_eq() check fails. Similar things happen in
ping_lookup() for SOCK_DGRAM sockets.
These tests used to pass due to a bug [1] in iputils, where "ping -I"
actually did not bind ICMP message sockets to device. The bug has been
fixed by iputils commit f455fee41c07 ("ping: also bind the ICMP socket
to the specific device") in 2016, which is why our rp_filter tests
started to fail. See [2] .
Fixing the tests while keeping everything in one netns turns out to be
nontrivial. Rework the tests and build the following topology:
┌─────────────────────────────┐ ┌─────────────────────────────┐
│ network namespace 1 (ns1) │ │ network namespace 2 (ns2) │
│ │ │ │
│ ┌────┐ ┌─────┐ │ │ ┌─────┐ ┌────┐ │
│ │ lo │<───>│veth1│<────────┼────┼─>│veth2│<──────────>│ lo │ │
│ └────┘ ├─────┴──────┐ │ │ ├─────┴──────┐ └────┘ │
│ │192.0.2.1/24│ │ │ │192.0.2.1/24│ │
│ └────────────┘ │ │ └────────────┘ │
└─────────────────────────────┘ └─────────────────────────────┘
Consider sending an ICMP_ECHO packet A in ns2. Both source and
destination IP addresses are 192.0.2.1, and we use strict mode rp_filter
in both ns1 and ns2:
1. A is routed to lo since its destination IP address is one of ns2's
local addresses (veth2);
2. A is redirected from lo's egress to veth2's egress using mirred;
3. A arrives at veth1's ingress in ns1;
4. A is redirected from veth1's ingress to lo's ingress, again, using
mirred;
5. In __fib_validate_source(), fib_info_nh_uses_dev() returns false,
since A was received on lo, but reverse path lookup says veth1;
6. However A is not dropped since we have relaxed this check for lo in
commit 66f8209547 ("fib: relax source validation check for loopback
packets");
Making sure A is not dropped here in this corner case is the whole point
of having this test.
7. As A reaches the ICMP layer, an ICMP_ECHOREPLY packet, B, is
generated;
8. Similarly, B is redirected from lo's egress to veth1's egress (in
ns1), then redirected once again from veth2's ingress to lo's
ingress (in ns2), using mirred.
Also test "ping 127.0.0.1" from ns2. It does not trigger the relaxed
check in __fib_validate_source(), but just to make sure the topology
works with loopback addresses.
Tested with ping from iputils 20210722-41-gf9fb573:
$ ./fib_tests.sh -t rp_filter
IPv4 rp_filter tests
TEST: rp_filter passes local packets [ OK ]
TEST: rp_filter passes loopback packets [ OK ]
[1] https://github.com/iputils/iputils/issues/55
[2] f455fee41c
Reported-by: Hangbin Liu <liuhangbin@gmail.com>
Fixes: adb701d6cf ("selftests: add a test case for rp_filter")
Reviewed-by: Cong Wang <cong.wang@bytedance.com>
Signed-off-by: Peilin Ye <peilin.ye@bytedance.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211201004720.6357-1-yepeilin.cs@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d1d57debee2d342a47615707588b96658fabb85 upstream.
Since 66dfdff03d ("perf tools: Add Python 3 support") we don't use
the tools/build/feature/test-libpython-version.c version in any Makefile
feature check:
$ find tools/ -type f | xargs grep feature-libpython-version
$
The only place where this was used was removed in 66dfdff03d:
- ifneq ($(feature-libpython-version), 1)
- $(warning Python 3 is not yet supported; please set)
- $(warning PYTHON and/or PYTHON_CONFIG appropriately.)
- $(warning If you also have Python 2 installed, then)
- $(warning try something like:)
- $(warning $(and ,))
- $(warning $(and ,) make PYTHON=python2)
- $(warning $(and ,))
- $(warning Otherwise, disable Python support entirely:)
- $(warning $(and ,))
- $(warning $(and ,) make NO_LIBPYTHON=1)
- $(warning $(and ,))
- $(error $(and ,))
- else
- LDFLAGS += $(PYTHON_EMBED_LDFLAGS)
- EXTLIBS += $(PYTHON_EMBED_LIBADD)
- LANG_BINDINGS += $(obj-perf)python/perf.so
- $(call detected,CONFIG_LIBPYTHON)
- endif
And nowadays we either build with PYTHON=python3 or just install the
python3 devel packages and perf will build against it.
But the leftover feature-libpython-version check made the fast path
feature detection to break in all cases except when python2 devel files
were installed:
$ rpm -qa | grep python.*devel
python3-devel-3.9.7-1.fc34.x86_64
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
<SNIP>
$ cat /tmp/build/perf/feature/test-all.make.output
In file included from test-all.c:18:
test-libpython-version.c:5:10: error: #error
5 | #error
| ^~~~~
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007fda6dbcf000)
$
As python3 is the norm these days, fix this by just removing the unused
feature-libpython-version feature check, making the test-all fast path
to work with the common case.
With this:
$ rm -rf /tmp/build/perf ; mkdir -p /tmp/build/perf ;
$ make -C tools/perf O=/tmp/build/perf install-bin |& head
make: Entering directory '/var/home/acme/git/perf/tools/perf'
BUILD: Doing 'make -j32' parallel build
HOSTCC /tmp/build/perf/fixdep.o
HOSTLD /tmp/build/perf/fixdep-in.o
LINK /tmp/build/perf/fixdep
Auto-detecting system features:
... dwarf: [ on ]
... dwarf_getlocations: [ on ]
... glibc: [ on ]
$ ldd ~/bin/perf | grep python
libpython3.9.so.1.0 => /lib64/libpython3.9.so.1.0 (0x00007f58800b0000)
$ cat /tmp/build/perf/feature/test-all.make.output
$
Reviewed-by: James Clark <james.clark@arm.com>
Fixes: 66dfdff03d ("perf tools: Add Python 3 support")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jaroslav Škarvada <jskarvad@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: https://lore.kernel.org/lkml/YaYmeeC6CS2b8OSz@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4ffbe87e2d5b53bcb0213d8650bbe70bf942de6a upstream.
sysfs__read_int() returns 0 on success, and so the fast read path was
always failing.
Fixes: bb629484d9 ("perf tools: Simplify checking if SMT is active.")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Kajol Jain <kjain@linux.ibm.com>
Cc: Kan Liang <kan.liang@linux.intel.com>
Cc: Konstantin Khlebnikov <koct9i@gmail.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Clarke <pc@us.ibm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211124001231.3277836-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2fa7d94afc1afbb4d702760c058dc2d7ed30f226 upstream.
The first commit cited below attempts to fix the off-by-one error that
appeared in some comparisons with an open range. Due to this error,
arithmetically equivalent pieces of code could get different verdicts
from the verifier, for example (pseudocode):
// 1. Passes the verifier:
if (data + 8 > data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
// 2. Rejected by the verifier (should still pass):
if (data + 7 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The attempted fix, however, shifts the range by one in a wrong
direction, so the bug not only remains, but also such piece of code
starts failing in the verifier:
// 3. Rejected by the verifier, but the check is stricter than in #1.
if (data + 8 >= data_end)
return early
read *(u64 *)data, i.e. [data; data+7]
The change performed by that fix converted an off-by-one bug into
off-by-two. The second commit cited below added the BPF selftests
written to ensure than code chunks like #3 are rejected, however,
they should be accepted.
This commit fixes the off-by-two error by adjusting new_range in the
right direction and fixes the tests by changing the range into the
one that should actually fail.
Fixes: fb2a311a31 ("bpf: fix off by one for range markings with L{T, E} patterns")
Fixes: b37242c773 ("bpf: add test cases to bpf selftests to cover all access tests")
Signed-off-by: Maxim Mikityanskiy <maximmi@nvidia.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20211130181607.593149-1-maximmi@nvidia.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d43b75fbc23f0ac1ef9c14a5a166d3ccb761a451 upstream.
After the below patch, the conntrack attached to skb is set to "notrack" in
the context of vrf device, for locally generated packets.
But this is true only when the default qdisc is set to the vrf device. When
changing the qdisc, notrack is not set anymore.
In fact, there is a shortcut in the vrf driver, when the default qdisc is
set, see commit dcdd43c41e ("net: vrf: performance improvements for
IPv4") for more details.
This patch ensures that the behavior is always the same, whatever the qdisc
is.
To demonstrate the difference, a new test is added in conntrack_vrf.sh.
Fixes: 8c9c296adfae ("vrf: run conntrack only in context of lower/physdev for locally generated packets")
Signed-off-by: Nicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: Florian Westphal <fw@strlen.de>
Reviewed-by: David Ahern <dsahern@kernel.org>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 33b8aad21ac175eba9577a73eb62b0aa141c241c upstream.
Rework the reproducer for the vrf+conntrack regression reported
by Eugene into a selftest and also add a test for ip masquerading
that Lahav fixed recently.
With net or net-next tree, the first test fails and the latter
two pass.
With 09e856d54bda5f28 ("vrf: Reset skb conntrack connection on VRF rcv")
reverted first test passes but the last two fail.
A proper fix needs more work, for time being a revert seems to be
the best choice, snat/masquerade did not work before the fix.
Link: https://lore.kernel.org/netdev/378ca299-4474-7e9a-3d36-2350c8c98995@gmail.com/T/#m95358a31810df7392f541f99d187227bc75c9963
Reported-by: Eugene Crosser <crosser@average.org>
Cc: Lahav Schlesinger <lschlesinger@drivenets.com>
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a05431b22be819d75db72ca3d44381d18a37b092 upstream.
ipv6_addr_bind/ipv4_addr_bind are function names. Previously, bind test
would not be run by default due to the wrong case names
Fixes: 34d0302ab8 ("selftests: Add ipv6 address bind tests to fcnal-test")
Fixes: 75b2b2b3db ("selftests: Add ipv4 address bind tests to fcnal-test")
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 20ae1d6aa159eb91a9bf09ff92ccaa94dbea92c2 upstream.
Each peer's endpoint contains a dst_cache entry that takes a reference
to another netdev. When the containing namespace exits, we take down the
socket and prevent future sockets from being created (by setting
creating_net to NULL), which removes that potential reference on the
netns. However, it doesn't release references to the netns that a netdev
cached in dst_cache might be taking, so the netns still might fail to
exit. Since the socket is gimped anyway, we can simply clear all the
dst_caches (by way of clearing the endpoint src), which will release all
references.
However, the current dst_cache_reset function only releases those
references lazily. But it turns out that all of our usages of
wg_socket_clear_peer_endpoint_src are called from contexts that are not
exactly high-speed or bottle-necked. For example, when there's
connection difficulty, or when userspace is reconfiguring the interface.
And in particular for this patch, when the netns is exiting. So for
those cases, it makes more sense to call dst_release immediately. For
that, we add a small helper function to dst_cache.
This patch also adds a test to netns.sh from Hangbin Liu to ensure this
doesn't regress.
Tested-by: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: Xiumei Mu <xmu@redhat.com>
Cc: Toke Høiland-Jørgensen <toke@redhat.com>
Cc: Paolo Abeni <pabeni@redhat.com>
Fixes: 900575aa33 ("wireguard: device: avoid circular netns references")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7e938beb8321d34f040557b8915b228af125f73c upstream.
DEBUG_PI_LIST was renamed to DEBUG_PLIST since 8e18faeac3 ("lib/plist:
rename DEBUG_PI_LIST to DEBUG_PLIST").
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Fixes: 8e18faeac3 ("lib/plist: rename DEBUG_PI_LIST to DEBUG_PLIST")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 782c72af567fc2ef09bd7615d0307f24de72c7e0 upstream.
We previously removed the restriction on looping to self, and then added
a test to make sure the kernel didn't blow up during a routing loop. The
kernel didn't blow up, thankfully, but on certain architectures where
skb fragmentation is easier, such as ppc64, the skbs weren't actually
being discarded after a few rounds through. But the test wasn't catching
this. So actually test explicitly for massive increases in tx to see if
we have a routing loop. Note that the actual loop problem will need to
be addressed in a different commit.
Fixes: b673e24aad ("wireguard: socket: remove errant restriction on looping to self")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 03ff1b1def73f817e196bf96ab36ac259490bd7c upstream.
The selftests currently parse the kernel log at the end to track
potential memory leaks. With these tests now reading off the end of the
buffer, due to recent optimizations, some creation messages were lost,
making the tests think that there was a free without an alloc. Fix this
by increasing the kernel log size.
Fixes: 24b70eeeb4f4 ("wireguard: use synchronize_net rather than synchronize_rcu")
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d9fc706108c15f8bc2d4ccccf8e50f74830fabd9 ]
perf_tip() may allocate memory or use a literal, this means memory
wasn't freed if allocated. Change the API so that literals aren't used.
At the same time add missing frees for system_path. These issues were
spotted using leak sanitizer.
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118073804.2149974-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0ca1f534a776cc7d42f2c33da4732b74ec2790cd ]
perf_hpp__column_unregister() removes an entry from a list but doesn't
free the memory causing a memory leak spotted by leak sanitizer.
Add the free while at the same time reducing the scope of the function
to static.
Signed-off-by: Ian Rogers <irogers@google.com>
Reviewed-by: Kajol Jain <kjain@linux.ibm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20211118071247.2140392-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9e1a8d9f683260d50e0a14176d3f7c46a93b2700 ]
'perf inject' is currently not working for Arm SPE. When you try to run
'perf inject' and 'perf report' with a perf.data file that contains SPE
traces, the tool reports a "Bad address" error:
# ./perf record -e arm_spe_0/ts_enable=1,store_filter=1,branch_filter=1,load_filter=1/ -a -- sleep 1
# ./perf inject -i perf.data -o perf.inject.data --itrace
# ./perf report -i perf.inject.data --stdio
0x42c00 [0x8]: failed to process type: 9 [Bad address]
Error:
failed to process sample
As far as I know, the issue was first spotted in [1], but 'perf inject'
was not yet injecting the samples. This patch does something similar to
what cs_etm does for injecting the samples [2], but for SPE.
[1] https://patchwork.kernel.org/project/linux-arm-kernel/cover/20210412091006.468557-1-leo.yan@linaro.org/#24117339
[2] https://git.kernel.org/pub/scm/linux/kernel/git/acme/linux.git/tree/tools/perf/util/cs-etm.c?h=perf/core&id=133fe2e617e48ca0948983329f43877064ffda3e#n1196
Reviewed-by: James Clark <james.clark@arm.com>
Signed-off-by: German Gomez <german.gomez@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Garry <john.garry@huawei.com>
Cc: Leo Yan <leo.yan@linaro.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Will Deacon <will@kernel.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: https://lore.kernel.org/r/20211105104130.28186-2-german.gomez@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9cdc1c5e3700a5200e5ca1f90b6958b6483845b ]
Commit 463538a383 ("perf tests: Fix test 68 zstd compression for
s390") inadvertently removed the -g flag from all platforms rather than
just s390, because the [[ ]] construct fails in sh. Changing to single
brackets restores testing of call graphs and removes the following error
from the output:
$ ./perf test -v 85
85: Zstd perf.data compression/decompression :
--- start ---
test child forked, pid 50643
Collecting compressed record file:
./tests/shell/record+zstd_comp_decomp.sh: 15: [[: not found
Fixes: 463538a383 ("perf tests: Fix test 68 zstd compression for s390")
Signed-off-by: James Clark <james.clark@arm.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Sumanth Korikkar <sumanthk@linux.ibm.com>
Cc: Thomas Richter <tmricht@linux.ibm.com>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: https://lore.kernel.org/r/20211028134828.65774-3-james.clark@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88e48238d53682281c9de2a0b65d24d3b64542a0 ]
ASan reports memory leaks while running:
$ sudo ./perf bench futex all
The leaks are caused by perf_cpu_map__new not being freed.
This patch adds the missing perf_cpu_map__put since it calls
cpu_map_delete implicitly.
Fixes: 9c3516d1b8 ("libperf: Add perf_cpu_map__new()/perf_cpu_map__read() functions")
Signed-off-by: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: André Almeida <andrealmeid@collabora.com>
Cc: Darren Hart <dvhart@infradead.org>
Cc: Davidlohr Bueso <dave@stgolabs.net>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sohaib Mohamed <sohaib.amhmd@gmail.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lore.kernel.org/lkml/20211112201134.77892-1-sohaib.amhmd@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4924b1f7c46711762fd0e65c135ccfbcfd6ded1f ]
perf_env__insert_btf() doesn't insert if a duplicate BTF id is
encountered and this causes a memory leak. Modify the function to return
a success/error value and then free the memory if insertion didn't
happen.
v2. Adds a return -1 when the insertion error occurs in
perf_env__fetch_btf. This doesn't affect anything as the result is
never checked.
Fixes: 3792cb2ff4 ("perf bpf: Save BTF in a rbtree in perf_env")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211112074525.121633-1-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a72fdfd21e01c626273ddcf5ab740d4caef4be54 upstream.
Commit in Fixes changed the iopl emulation to not #GP on CLI and STI
because it would break some insane luserspace tools which would toggle
interrupts.
The corresponding selftest would rely on the fact that executing CLI/STI
would trigger a #GP and thus detect it this way but since that #GP is
not happening anymore, the detection is now wrong too.
Extend the test to actually look at the IF flag and whether executing
those insns had any effect on it. The STI detection needs to have the
fact that interrupts were previously disabled, passed in so do that from
the previous CLI test, i.e., STI test needs to follow a previous CLI one
for it to make sense.
Fixes: b968e84b509d ("x86/iopl: Fake iopl(3) CLI/STI usage")
Suggested-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Borislav Petkov <bp@suse.de>
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20211030083939.13073-1-bp@alien8.de
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a20eac0af02810669e187cb623bc904908c423af upstream.
Previous fix aded bpf_clamp_umax() helper use to re-validate boundaries.
While that works correctly, it introduces more branches, which blows up
past 1 million instructions in no-alu32 variant of strobemeta selftests.
Switching len variable from u32 to u64 also fixes the issue and reduces
the number of validated instructions, so use that instead. Fix this
patch and bpf_clamp_umax() removed, both alu32 and no-alu32 selftests
pass.
Fixes: 0133c20480b1 ("selftests/bpf: Fix strobemeta selftest regression")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211101230118.1273019-1-andrii@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d336509cb9d03970911878bb77f0497f64fda061 ]
The below commit added optional support for passing a bind address.
It configures the sockaddr bind arguments before parsing options and
reconfigures on options -b and -4.
This broke support for passing port (-p) on its own.
Configure sockaddr after parsing all arguments.
Fixes: 3327a9c463 ("selftests: add functionals test for UDP GRO")
Reported-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88c42f4d6cb249eb68524282f8d4cc32f9059984 ]
If btf__new() is called then there needs to be a corresponding btf__free().
Fixes: f8dfeae009 ("perf bpf: Show more BPF program info in print_bpf_prog_info()")
Signed-off-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tiezhu Yang <yangtiezhu@loongson.cn>
Cc: Yonghong Song <yhs@fb.com>
Cc: bpf@vger.kernel.org
Cc: netdev@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211106053733.3580931-2-irogers@google.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b9979db8340154526d9ab38a1883d6f6ba9b6d47 ]
Before this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0xffffffff))
After this fix:
166: (b5) if r2 <= 0x1 goto pc+22
from 166 to 189: R2=invP(id=1,umax_value=1,var_off=(0x0; 0x1))
While processing BPF_JLE the reg_set_min_max() would set true_reg->umax_value = 1
and call __reg_combine_64_into_32(true_reg).
Without the fix it would not pass the condition:
if (__reg64_bound_u32(reg->umin_value) && __reg64_bound_u32(reg->umax_value))
since umin_value == 0 at this point.
Before commit 10bf4e83167c the umin was incorrectly ingored.
The commit 10bf4e83167c fixed the correctness issue, but pessimized
propagation of 64-bit min max into 32-bit min max and corresponding var_off.
Fixes: 10bf4e83167c ("bpf: Fix propagation of 32 bit unsigned bounds from 64 bit bounds")
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20211101222153.78759-1-alexei.starovoitov@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f48ad69097fe79d1de13c4d8fef556d4c11c5e68 ]
Make sure to use pclose() to properly close the pipe opened by popen().
Fixes: 81f77fd0de ("bpf: add selftest for stackmap with BPF_F_STACK_BUILD_ID")
Signed-off-by: Andrea Righi <andrea.righi@canonical.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Link: https://lore.kernel.org/bpf/20211026143409.42666-1-andrea.righi@canonical.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3fc706e94f5653def2783ffcd809a38676b7551 ]
Similar to the fix in commit:
e31eec77e4ab ("bpf: selftests: Fix fd cleanup in get_branch_snapshot")
We use designated initializer to set fds to -1 without breaking on
future changes to MAX_SERVER constant denoting the array size.
The particular close(0) occurs on non-reuseport tests, so it can be seen
with -n 115/{2,3} but not 115/4. This can cause problems with future
tests if they depend on BTF fd never being acquired as fd 0, breaking
internal libbpf assumptions.
Fixes: 0ab5539f85 ("selftests/bpf: Tests for BPF_SK_LOOKUP attach point")
Signed-off-by: Kumar Kartikeya Dwivedi <memxor@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: Jakub Sitnicki <jakub@cloudflare.com>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20211028063501.2239335-8-memxor@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 509b2937bce90089fd2785db9f27951a3d850c34 ]
Convert the selftests for sk_lookup narrow context access to use
PROG_TEST_RUN instead of creating actual sockets. This ensures that
ctx is populated correctly when using PROG_TEST_RUN.
Assert concrete values since we now control remote_ip and remote_port.
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210303101816.36774-4-lmb@cloudflare.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 45f2bebc8079788f62f22d9e8b2819afb1789d7b ]
__BYTE_ORDER is supposed to be defined by a libc, and __BYTE_ORDER__ -
by a compiler. bpf_core_read.h checks __BYTE_ORDER == __LITTLE_ENDIAN,
which is true if neither are defined, leading to incorrect behavior on
big-endian hosts if libc headers are not included, which is often the
case.
Fixes: ee26dade0e ("libbpf: Add support for relocatable bitfields")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211026010831.748682-2-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c825f5fee19caf301d9821cd79abaa734322de26 ]
Original code assumed fixed and correct BTF header length. That's not
always the case, though, so fix this bug with a proper additional check.
And use actual header length instead of sizeof(struct btf_header) in
sanity checks.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5245dafe3d49efba4d3285cf27ee1cc1eeafafc6 ]
btf_header's str_off+str_len or type_off+type_len can overflow as they
are u32s. This will lead to bypassing the sanity checks during BTF
parsing, resulting in crashes afterwards. Fix by using 64-bit signed
integers for comparison.
Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Evgeny Vereshchagin <evvers@ya.ru>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20211023003157.726961-1-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b8d52264df85ec12f370c0a8b28d0ac59a05877a ]
Empty BTFs do come up (e.g., simple kernel modules with no new types and
strings, compared to the vmlinux BTF) and there is nothing technically wrong
with them. So remove unnecessary check preventing loading empty BTFs.
Fixes: d8123624506c ("libbpf: Fix BTF data layout checks and allow empty BTF")
Reported-by: Christopher William Snowhill <chris@kode54.net>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/20210110070341.1380086-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d8123624506cd62730c9cd9c7672c698e462703d ]
Make data section layout checks stricter, disallowing overlap of types and
strings data.
Additionally, allow BTFs with no type data. There is nothing inherently wrong
with having BTF with no types (put potentially with some strings). This could
be a situation with kernel module BTFs, if module doesn't introduce any new
type information.
Also fix invalid offset alignment check for btf->hdr->type_off.
Fixes: 8a138aed4a ("bpf: btf: Add BTF support to libbpf")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20201105043402.2530976-8-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e89ef634f81c9d90e1824ab183721f3b361472e6 ]
Bpftool creates a new JSON object for writing program metadata in plain
text mode, regardless of metadata being present or not. Then this writer
is freed if any metadata has been found and printed, but it leaks
otherwise. We cannot destroy the object unconditionally, because the
destructor prints an undesirable line break. Instead, make sure the
writer is created only after we have found program metadata to print.
Found with valgrind.
Fixes: aff52e685e ("bpftool: Support dumping metadata")
Signed-off-by: Quentin Monnet <quentin@isovalent.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20211022094743.11052-1-quentin@isovalent.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed290e1c20da19fa100a3e0f421aa31b65984960 ]
Though gcc conveniently compiles a simple memset to "rep stos," clang
prefers to call the libc version of memset. If a test is dynamically
linked, the libc memset isn't available in L1 (nor is the PLT or the
GOT, for that matter). Even if the test is statically linked, the libc
memset may choose to use some CPU features, like AVX, which may not be
enabled in L1. Note that __builtin_memset doesn't solve the problem,
because (a) the compiler is free to call memset anyway, and (b)
__builtin_memset may also choose to use features like AVX, which may
not be available in L1.
To avoid a myriad of problems, use an explicit "rep stos" to clear the
VMCB in generic_svm_setup(), which is called both from L0 and L1.
Reported-by: Ricardo Koller <ricarkol@google.com>
Signed-off-by: Jim Mattson <jmattson@google.com>
Fixes: 20ba262f86 ("selftests: KVM: AMD Nested test infrastructure")
Message-Id: <20210930003649.4026553-1-jmattson@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 47bc726fe8d1910872dc3d7e7ec70f8b9e6043b7 ]
Building the KVM selftests with LLVM's integrated assembler fails with:
$ CFLAGS=-fintegrated-as make -C tools/testing/selftests/kvm CC=clang
lib/x86_64/svm.c:77:16: error: too few operands for instruction
asm volatile ("vmsave\n\t" : : "a" (vmcb_gpa) : "memory");
^
<inline asm>:1:2: note: instantiated into assembly here
vmsave
^
lib/x86_64/svm.c:134:3: error: too few operands for instruction
"vmload\n\t"
^
<inline asm>:1:2: note: instantiated into assembly here
vmload
^
This is because LLVM IAS does not currently support calling vmsave,
vmload, or vmload without an explicit %rax operand.
Add an explicit operand to vmsave, vmload, and vmrum in svm.c. Fixing
this was suggested by Sean Christopherson.
Tested: building without this error in clang 11. The following patch
(not queued yet) needs to be applied to solve the other remaining error:
"selftests: kvm: remove reassignment of non-absolute variables".
Suggested-by: Sean Christopherson <seanjc@google.com>
Link: https://lore.kernel.org/kvm/X+Df2oQczVBmwEzi@google.com/
Reviewed-by: Jim Mattson <jmattson@google.com>
Signed-off-by: Ricardo Koller <ricarkol@google.com>
Message-Id: <20210210031719.769837-1-ricarkol@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9af9dcf11bda3e2c0e24c1acaacb8685ad974e93 ]
The asm_cpu_bringup_and_idle() function is required to push the return
value on the stack in order to make ORC happy, but the only reason
objtool doesn't complain is because of a happy accident.
The thing is that asm_cpu_bringup_and_idle() doesn't return, so
validate_branch() never terminates and falls through to the next
function, which in the normal case is the hypercall_page. And that, as
it happens, is 4095 NOPs and a RET.
Make asm_cpu_bringup_and_idle() terminate on it's own, by making the
function it calls as a dead-end. This way we no longer rely on what
code happens to come after.
Fixes: c3881eb58d ("x86/xen: Make the secondary CPU idle tasks reliable")
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Link: https://lore.kernel.org/r/20210624095147.693801717@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f35dcaa0a8a29188ed61083d153df1454cf89d08 ]
close_range() test type conflicts with close_range() library call in
x86_64-linux-gnu/bits/unistd_ext.h. Fix it by changing the name to
core_close_range().
gcc -g -I../../../../usr/include/ close_range_test.c -o ../tools/testing/selftests/core/close_range_test
In file included from close_range_test.c:16:
close_range_test.c:57:6: error: conflicting types for ‘close_range’; have ‘void(struct __test_metadata *)’
57 | TEST(close_range)
| ^~~~~~~~~~~
../kselftest_harness.h:181:21: note: in definition of macro ‘__TEST_IMPL’
181 | static void test_name(struct __test_metadata *_metadata); \
| ^~~~~~~~~
close_range_test.c:57:1: note: in expansion of macro ‘TEST’
57 | TEST(close_range)
| ^~~~
In file included from /usr/include/unistd.h:1204,
from close_range_test.c:13:
/usr/include/x86_64-linux-gnu/bits/unistd_ext.h:56:12: note: previous declaration of ‘close_range’ with type ‘int(unsigned int, unsigned int, int)’
56 | extern int close_range (unsigned int __fd, unsigned int __max_fd,
| ^~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c3867ab5924b7a9a0b4a117902a08669d8be7c21 ]
get_warnings_count() does fclose() using File * returned from popen().
Fix it to call pclose() as it should.
tools/testing/selftests/kvm/x86_64/mmio_warning_test
x86_64/mmio_warning_test.c: In function ‘get_warnings_count’:
x86_64/mmio_warning_test.c:87:9: warning: ‘fclose’ called on pointer returned from a mismatched allocation function [-Wmismatched-dealloc]
87 | fclose(f);
| ^~~~~~~~~
x86_64/mmio_warning_test.c:84:13: note: returned from ‘popen’
84 | f = popen("dmesg | grep \"WARNING:\" | wc -l", "r");
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1f83b835a3eaa5ae4bd825fb07182698bfc243ba ]
On my box I see a bunch of ping/nettest processes hanging
around after fcntal-test.sh is done.
Clean those up before netns deletion.
Signed-off-by: Florian Westphal <fw@strlen.de>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211021140247.29691-1-fw@strlen.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 29c77550eef31b0d72a45b49eeab03b8963264e8 upstream.
When perf.data is not written cleanly, we would like to process existing
data as much as possible (please see f_header.data.size == 0 condition
in perf_session__read_header). However, perf.data with partial data may
crash perf. Specifically, we see crash in 'perf script' for NULL
session->header.env.arch.
Fix this by checking session->header.env.arch before using it to determine
native_arch. Also split the if condition so it is easier to read.
Committer notes:
If it is a pipe, we already assume is a native arch, so no need to check
session->header.env.arch.
Signed-off-by: Song Liu <songliubraving@fb.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: kernel-team@fb.com
Cc: stable@vger.kernel.org
Link: http://lore.kernel.org/lkml/20211004053238.514936-1-songliubraving@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Commit 183d9ebd44 ("selftests/bpf: Fix core_reloc test runner") causes
builds of selftests/bpf to fail on 5.10.y since the branch doesn't have the
ASSERT_FALSE macro yet. Replace ASSERT_FALSE with ASSERT_EQ.
Fixes: 183d9ebd44 ("selftests/bpf: Fix core_reloc test runner")
Signed-off-by: Lorenz Bauer <lmb@cloudflare.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 3ff6d64e68abc231955d216236615918797614ae ]
The `cpu` argument of perf_evsel__read() must specify the cpu index.
perf_cpu_map__for_each_cpu() is for iterating the cpu number (not index)
and is thus not appropriate for use with perf_evsel__read().
So, if there is an offline CPU, the cpu number specified in the argument
may point out of range because the cpu number and the cpu index are
different.
Fix test_stat_cpu().
Testing it:
# make tests -C tools/lib/perf/
make: Entering directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
running static:
- running tests/test-cpumap.c...OK
- running tests/test-threadmap.c...OK
- running tests/test-evlist.c...OK
- running tests/test-evsel.c...OK
running dynamic:
- running tests/test-cpumap.c...OK
- running tests/test-threadmap.c...OK
- running tests/test-evlist.c...OK
- running tests/test-evsel.c...OK
make: Leaving directory '/home/nakamura/kernel_src/linux-5.15-rc4_fix/tools/lib/perf'
Signed-off-by: Shunsuke Nakamura <nakamura.shun@fujitsu.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20211011083704.4108720-1-nakamura.shun@fujitsu.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 3e6ed7703dae6838c104d73d3e76e9b79f5c0528 upstream.
This should not be there.
Fixes: 2de03b4523 ("selftests: netfilter: add flowtable test script")
Signed-off-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 0857d6f8c759d95f89d0436f86cdfd189ef99f20 ]
Commit bdb7cc643f ("ipv6: Count interface receive statistics on the
ingress netdev") does not work when ip6_forward() executes on the skbs
with vrf-enslaved netdev. Use IP6CB(skb)->iif to get to the right one.
Add a selftest script to verify.
Fixes: bdb7cc643f ("ipv6: Count interface receive statistics on the ingress netdev")
Signed-off-by: Stephen Suryaputra <ssuryaextr@gmail.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://lore.kernel.org/r/20211014130845.410602-1-ssuryaextr@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa1b41a74d1136cbdd6960f36d7b9c7aa35c8139 ]
There is much duplication in the error handling for directory transvering
for prcessing JSONs.
Factor out the common code to tidy a bit.
Signed-off-by: John Garry <john.garry@huawei.com>
Reviewed-By: Kajol Jain<kjain@linux.ibm.com>
Link: https://lore.kernel.org/r/1603364547-197086-2-git-send-email-john.garry@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 01f91acb55be7aac3950b89c458bcea9ef6e4f49 ]
The SMC64 calling convention passes a function identifier in w0 and its
parameters in x1-x17. Given this, there are two deviations in the
SMC64 call performed by the steal_time test: the function identifier is
assigned to a 64 bit register and the parameter is only 32 bits wide.
Align the call with the SMCCC by using a 32 bit register to handle the
function identifier and increasing the parameter width to 64 bits.
Suggested-by: Andrew Jones <drjones@redhat.com>
Signed-off-by: Oliver Upton <oupton@google.com>
Reviewed-by: Andrew Jones <drjones@redhat.com>
Message-Id: <20210921171121.2148982-3-oupton@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ebaeab2fe87987cef28eb5ab174c42cd28594387 ]
Idle page tracking can also be used for process address space, not only
file mappings.
Without this change, using with '-i' option for process address space
encounters below errors reported.
$ sudo ./page-types -p $(pidof bash) -i
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
mark page idle: Bad file descriptor
...
Link: https://lkml.kernel.org/r/20210917032826.10669-1-changbin.du@gmail.com
Signed-off-by: Changbin Du <changbin.du@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 39a71f712d8a13728febd8f3cb3f6db7e1fa7221 ]
Fix get_warnings_count() to check fscanf() return value to get rid
of the following warning:
x86_64/mmio_warning_test.c: In function ‘get_warnings_count’:
x86_64/mmio_warning_test.c:85:2: warning: ignoring return value of ‘fscanf’ declared with attribute ‘warn_unused_result’ [-Wunused-result]
85 | fscanf(f, "%d", &warnings);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Acked-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8914a7a247e065438a0ec86a58c1c359223d2c9e ]
LKP/0Day reported some building errors about kvm, and errors message
are not always same:
- lib/x86_64/processor.c:1083:31: error: ‘KVM_CAP_NESTED_STATE’ undeclared
(first use in this function); did you mean ‘KVM_CAP_PIT_STATE2’?
- lib/test_util.c:189:30: error: ‘MAP_HUGE_16KB’ undeclared (first use
in this function); did you mean ‘MAP_HUGE_16GB’?
Although kvm relies on the khdr, they still be built in parallel when -j
is specified. In this case, it will cause compiling errors.
Here we mark target khdr as NOTPARALLEL to make it be always built
first.
CC: Philip Li <philip.li@intel.com>
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Shuah Khan <skhan@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f81c08f897adafd2ed43f86f00207ff929f0b2eb ]
testusb' application which uses 'usbtest' driver reports 'unknown speed'
from the function 'find_testdev'. The variable 'entry->speed' was not
updated from the application. The IOCTL mentioned in the FIXME comment can
only report whether the connection is low speed or not. Speed is read using
the IOCTL USBDEVFS_GET_SPEED which reports the proper speed grade. The
call is implemented in the function 'handle_testdev' where the file
descriptor was availble locally. Sample output is given below where 'high
speed' is printed as the connected speed.
sudo ./testusb -a
high speed /dev/bus/usb/001/011 0
/dev/bus/usb/001/011 test 0, 0.000015 secs
/dev/bus/usb/001/011 test 1, 0.194208 secs
/dev/bus/usb/001/011 test 2, 0.077289 secs
/dev/bus/usb/001/011 test 3, 0.170604 secs
/dev/bus/usb/001/011 test 4, 0.108335 secs
/dev/bus/usb/001/011 test 5, 2.788076 secs
/dev/bus/usb/001/011 test 6, 2.594610 secs
/dev/bus/usb/001/011 test 7, 2.905459 secs
/dev/bus/usb/001/011 test 8, 2.795193 secs
/dev/bus/usb/001/011 test 9, 8.372651 secs
/dev/bus/usb/001/011 test 10, 6.919731 secs
/dev/bus/usb/001/011 test 11, 16.372687 secs
/dev/bus/usb/001/011 test 12, 16.375233 secs
/dev/bus/usb/001/011 test 13, 2.977457 secs
/dev/bus/usb/001/011 test 14 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 17, 0.148826 secs
/dev/bus/usb/001/011 test 18, 0.068718 secs
/dev/bus/usb/001/011 test 19, 0.125992 secs
/dev/bus/usb/001/011 test 20, 0.127477 secs
/dev/bus/usb/001/011 test 21 --> 22 (Invalid argument)
/dev/bus/usb/001/011 test 24, 4.133763 secs
/dev/bus/usb/001/011 test 27, 2.140066 secs
/dev/bus/usb/001/011 test 28, 2.120713 secs
/dev/bus/usb/001/011 test 29, 0.507762 secs
Signed-off-by: Faizel K B <faizel.kb@dicortech.com>
Link: https://lore.kernel.org/r/20210902114444.15106-1-faizel.kb@dicortech.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 79e2c306667542b8ee2d9a9d947eadc7039f0a3c ]
It's not enough to set net.ipv4.conf.all.rp_filter=0, that does not override
a greater rp_filter value on the individual interfaces. We also need to set
net.ipv4.conf.default.rp_filter=0 before creating the interfaces. That way,
they'll also get their own rp_filter value of zero.
Fixes: 0fde56e438 ("selftests: bpf: add test_lwt_ip_encap selftest")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/b1cdd9d469f09ea6e01e9c89a6071c79b7380f89.1632386362.git.jbenc@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d888eaac4fb1df30320bb1305a8f78efe86524c6 ]
When building bpf selftest with make -j, I'm randomly getting build failures
such as this one:
In file included from progs/bpf_flow.c:19:
[...]/tools/testing/selftests/bpf/tools/include/bpf/bpf_helpers.h:11:10: fatal error: 'bpf_helper_defs.h' file not found
#include "bpf_helper_defs.h"
^~~~~~~~~~~~~~~~~~~
The file that fails the build varies between runs but it's always in the
progs/ subdir.
The reason is a missing make dependency on libbpf for the .o files in
progs/. There was a dependency before commit 3ac2e20fba but that commit
removed it to prevent unneeded rebuilds. However, that only works if libbpf
has been built already; the 'wildcard' prerequisite does not trigger when
there's no bpf_helper_defs.h generated yet.
Keep the libbpf as an order-only prerequisite to satisfy both goals. It is
always built before the progs/ objects but it does not trigger unnecessary
rebuilds by itself.
Fixes: 3ac2e20fba ("selftests/bpf: BPF object files should depend only on libbpf headers")
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Link: https://lore.kernel.org/bpf/ee84ab66436fba05a197f952af23c98d90eb6243.1632758415.git.jbenc@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e3dbf765fe22060acbcb8eb8c4d256e655a1247 ]
During initialization of a signal testcase, features declared as required
are properly checked against the running system but no action is then taken
to effectively skip such a testcase.
Fix core signals test logic to abort initialization and report such a
testcase as skipped to the KSelfTest framework.
Fixes: f96bf43403 ("kselftest: arm64: mangle_pstate_invalid_compat_toggle and common utils")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Reviewed-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210920121228.35368-1-cristian.marussi@arm.com
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4e4dc4fab686c5f3f185272a19b83930664bef5 ]
Allow testcases for SVE signal handling to flag the dependency and be
skipped on systems without SVE support.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819134245.13935-2-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 32ba9f0fb027cc43074e3ea26fcf831adeee8e03 ]
Since tracing_on indicates only "1" (default) or "0", ftrace2bconf.sh
only need to check the value is "0".
Link: https://lkml.kernel.org/r/163077087144.222577.6888011847727968737.stgit@devnote2
Fixes: 55ed4560774d ("tools/bootconfig: Add tracing_on support to helper scripts")
Signed-off-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 4a86d41404005a3c7e7b6065e8169ac6202887a9 upstream.
Currently perf saves a build-id with size but old versions assumes the
size of 20. In case the build-id is less than 20 (like for MD5), it'd
fill the rest with 0s.
I saw a problem when old version of perf record saved a binary in the
build-id cache and new version of perf reads the data. The symbols
should be read from the build-id cache (as the path no longer has the
same binary) but it failed due to mismatch in the build-id.
symsrc__init: build id mismatch for /home/namhyung/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf.
The build-id event in the data has 20 byte build-ids, but it saw a
different size (16) when it reads the build-id of the elf file in the
build-id cache.
$ readelf -n ~/.debug/.build-id/53/e4c2f42a4c61a2d632d92a72afa08f00000000/elf
Displaying notes found in: .note.gnu.build-id
Owner Data size Description
GNU 0x00000010 NT_GNU_BUILD_ID (unique build ID bitstring)
Build ID: 53e4c2f42a4c61a2d632d92a72afa08f
Let's fix this by allowing trailing zeros if the size is different.
Fixes: 39be8d0115 ("perf tools: Pass build_id object to dso__build_id_equal()")
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210910224630.1084877-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b3e453272d436aab8adbe810c6d7043670281487 upstream.
We'll use it to check for undefined/zero data.
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Suggested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexey Budankov <alexey.budankov@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Michael Petlan <mpetlan@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lore.kernel.org/lkml/20201126170026.2619053-6-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit bfd862a7e9318dd906844807a713d27cdd1a72b1 ]
'$cin' and '$sin' variables are local to a function: they are then not
available from the cleanup trap.
Instead, we need to use '$large' and '$small' that are not local and
defined just before setting the trap.
Without this patch, running this script in a loop might cause a:
write: No space left on device
issue.
Fixes: 1a418cb8e8 ("mptcp: simult flow self-tests")
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net>
Signed-off-by: Mat Martineau <mathew.j.martineau@linux.intel.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit edf7b4a2d85e37a1ee77156bddaed4aa6af9c5e1 ]
The build on fedora:35 and fedora:rawhide with clang is failing with:
49 41.00 fedora:35 : FAIL clang version 13.0.0 (Fedora 13.0.0~rc1-1.fc35)
bench/inject-buildid.c:351:6: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable]
u64 len = 0;
^
1 error generated.
make[3]: *** [/git/perf-5.14.0-rc7/tools/build/Makefile.build:139: bench] Error 2
50 41.11 fedora:rawhide : FAIL clang version 13.0.0 (Fedora 13.0.0~rc1-1.fc35)
bench/inject-buildid.c:351:6: error: variable 'len' set but not used [-Werror,-Wunused-but-set-variable]
u64 len = 0;
^
1 error generated.
make[3]: *** [/git/perf-5.14.0-rc7/tools/build/Makefile.build:139: bench] Error 2
That 'len' variable is not used at all, so just make sure all the
synthesize_RECORD() routines return ssize_t to propagate the writen()
return, as it may fail, ditch the 'ret' var and bail out if those
routines fail.
Fixes: 0bf02a0d80 ("perf bench: Add build-id injection benchmark")
Acked-by: Namhyung Kim <namhyung@kernel.org>
Link: http://lore.kernel.org/lkml/CAM9d7cgEZNSor+B+7Y2C+QYGme_v5aH0Zn0RLfxoQ+Fy83EHrg@mail.gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1b704b27beb11ce147d64b21c914e57afbfb5656 upstream.
If altname deletion of the short alternative name fails, the error
message printed is: "Failed to add short alternative name".
This is obviously a typo, as we are testing altname deletion.
Fix this using a proper error message.
Fixes: f95e6c9c46 ("selftest: net: add alternative names test")
Signed-off-by: Andrea Claudi <aclaudi@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 57f0ff059e3daa4e70a811cb1d31a49968262d20 upstream.
It's later supposed to be either a correct address or NULL. Without the
initialization, it may contain an undefined value which results in the
following segmentation fault:
# perf top --sort comm -g --ignore-callees=do_idle
terminates with:
#0 0x00007ffff56b7685 in __strlen_avx2 () from /lib64/libc.so.6
#1 0x00007ffff55e3802 in strdup () from /lib64/libc.so.6
#2 0x00005555558cb139 in hist_entry__init (callchain_size=<optimized out>, sample_self=true, template=0x7fffde7fb110, he=0x7fffd801c250) at util/hist.c:489
#3 hist_entry__new (template=template@entry=0x7fffde7fb110, sample_self=sample_self@entry=true) at util/hist.c:564
#4 0x00005555558cb4ba in hists__findnew_entry (hists=hists@entry=0x5555561d9e38, entry=entry@entry=0x7fffde7fb110, al=al@entry=0x7fffde7fb420,
sample_self=sample_self@entry=true) at util/hist.c:657
#5 0x00005555558cba1b in __hists__add_entry (hists=hists@entry=0x5555561d9e38, al=0x7fffde7fb420, sym_parent=<optimized out>, bi=bi@entry=0x0, mi=mi@entry=0x0,
sample=sample@entry=0x7fffde7fb4b0, sample_self=true, ops=0x0, block_info=0x0) at util/hist.c:288
#6 0x00005555558cbb70 in hists__add_entry (sample_self=true, sample=0x7fffde7fb4b0, mi=0x0, bi=0x0, sym_parent=<optimized out>, al=<optimized out>, hists=0x5555561d9e38)
at util/hist.c:1056
#7 iter_add_single_cumulative_entry (iter=0x7fffde7fb460, al=<optimized out>) at util/hist.c:1056
#8 0x00005555558cc8a4 in hist_entry_iter__add (iter=iter@entry=0x7fffde7fb460, al=al@entry=0x7fffde7fb420, max_stack_depth=<optimized out>, arg=arg@entry=0x7fffffff7db0)
at util/hist.c:1231
#9 0x00005555557cdc9a in perf_event__process_sample (machine=<optimized out>, sample=0x7fffde7fb4b0, evsel=<optimized out>, event=<optimized out>, tool=0x7fffffff7db0)
at builtin-top.c:842
#10 deliver_event (qe=<optimized out>, qevent=<optimized out>) at builtin-top.c:1202
#11 0x00005555558a9318 in do_flush (show_progress=false, oe=0x7fffffff80e0) at util/ordered-events.c:244
#12 __ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP, timestamp=timestamp@entry=0) at util/ordered-events.c:323
#13 0x00005555558a9789 in __ordered_events__flush (timestamp=<optimized out>, how=<optimized out>, oe=<optimized out>) at util/ordered-events.c:339
#14 ordered_events__flush (how=OE_FLUSH__TOP, oe=0x7fffffff80e0) at util/ordered-events.c:341
#15 ordered_events__flush (oe=oe@entry=0x7fffffff80e0, how=how@entry=OE_FLUSH__TOP) at util/ordered-events.c:339
#16 0x00005555557cd631 in process_thread (arg=0x7fffffff7db0) at builtin-top.c:1114
#17 0x00007ffff7bb817a in start_thread () from /lib64/libpthread.so.0
#18 0x00007ffff5656dc3 in clone () from /lib64/libc.so.6
If you look at the frame #2, the code is:
488 if (he->srcline) {
489 he->srcline = strdup(he->srcline);
490 if (he->srcline == NULL)
491 goto err_rawdata;
492 }
If he->srcline is not NULL (it is not NULL if it is uninitialized rubbish),
it gets strdupped and strdupping a rubbish random string causes the problem.
Also, if you look at the commit 1fb7d06a50, it adds the srcline property
into the struct, but not initializing it everywhere needed.
Committer notes:
Now I see, when using --ignore-callees=do_idle we end up here at line
2189 in add_callchain_ip():
2181 if (al.sym != NULL) {
2182 if (perf_hpp_list.parent && !*parent &&
2183 symbol__match_regex(al.sym, &parent_regex))
2184 *parent = al.sym;
2185 else if (have_ignore_callees && root_al &&
2186 symbol__match_regex(al.sym, &ignore_callees_regex)) {
2187 /* Treat this symbol as the root,
2188 forgetting its callees. */
2189 *root_al = al;
2190 callchain_cursor_reset(cursor);
2191 }
2192 }
And the al that doesn't have the ->srcline field initialized will be
copied to the root_al, so then, back to:
1211 int hist_entry_iter__add(struct hist_entry_iter *iter, struct addr_location *al,
1212 int max_stack_depth, void *arg)
1213 {
1214 int err, err2;
1215 struct map *alm = NULL;
1216
1217 if (al)
1218 alm = map__get(al->map);
1219
1220 err = sample__resolve_callchain(iter->sample, &callchain_cursor, &iter->parent,
1221 iter->evsel, al, max_stack_depth);
1222 if (err) {
1223 map__put(alm);
1224 return err;
1225 }
1226
1227 err = iter->ops->prepare_entry(iter, al);
1228 if (err)
1229 goto out;
1230
1231 err = iter->ops->add_single_entry(iter, al);
1232 if (err)
1233 goto out;
1234
That al at line 1221 is what hist_entry_iter__add() (called from
sample__resolve_callchain()) saw as 'root_al', and then:
iter->ops->add_single_entry(iter, al);
will go on with al->srcline with a bogus value, I'll add the above
sequence to the cset and apply, thanks!
Signed-off-by: Michael Petlan <mpetlan@redhat.com>
CC: Milian Wolff <milian.wolff@kdab.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Fixes: 1fb7d06a50 ("perf report Use srcline from callchain for hist entries")
Link: https //lore.kernel.org/r/20210719145332.29747-1-mpetlan@redhat.com
Reported-by: Juri Lelli <jlelli@redhat.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 47bb27a20d6ea22cd092c1fc2bb4fcecac374838 ]
This lock is not released if the program
return at the patched branch.
Signed-off-by: Chengfeng Ye <cyeaa@connect.ust.hk>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210827074140.118671-1-cyeaa@connect.ust.hk
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d82d73da35b72b53fe0d96350a2b8d929d07e42 ]
0Day robot observed that it's easily timeout on a heavy load host.
-------------------
# selftests: bpf: test_maps
# Fork 1024 tasks to 'test_update_delete'
# Fork 1024 tasks to 'test_update_delete'
# Fork 100 tasks to 'test_hashmap'
# Fork 100 tasks to 'test_hashmap_percpu'
# Fork 100 tasks to 'test_hashmap_sizes'
# Fork 100 tasks to 'test_hashmap_walk'
# Fork 100 tasks to 'test_arraymap'
# Fork 100 tasks to 'test_arraymap_percpu'
# Failed sockmap unexpected timeout
not ok 3 selftests: bpf: test_maps # exit=1
# selftests: bpf: test_lru_map
# nr_cpus:8
-------------------
Since this test will be scheduled by 0Day to a random host that could have
only a few cpus(2-8), enlarge the timeout to avoid a false NG report.
In practice, i tried to pin it to only one cpu by 'taskset 0x01 ./test_maps',
and knew 10S is likely enough, but i still perfer to a larger value 30.
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Li Zhijian <lizhijian@cn.fujitsu.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20210820015556.23276-2-lizhijian@cn.fujitsu.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c69bd2ca6ee20064dde7853cd749284e053a874 ]
The PAC tests check to see if the system supports the relevant PAC features
but instead of skipping the tests if they can't be executed they fail the
tests which makes things look like they're not working when they are.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819165723.43903-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83e5dcbece4ea67ec3ad94b897e2844184802fd7 ]
When skipping the tests due to a lack of system support for MTE we
currently print a message saying FAIL which makes it look like the test
failed even though the test did actually report KSFT_SKIP, creating some
confusion. Change the error message to say SKIP instead so things are
clearer.
Signed-off-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20210819172902.56211-1-broonie@kernel.org
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b16ac5bf732a5e23d164cf908ec7742d6a6120d3 ]
libbpf CI has reported send_signal test is flaky although
I am not able to reproduce it in my local environment.
But I am able to reproduce with on-demand libbpf CI ([1]).
Through code analysis, the following is possible reason.
The failed subtest runs bpf program in softirq environment.
Since bpf_send_signal() only sends to a fork of "test_progs"
process. If the underlying current task is
not "test_progs", bpf_send_signal() will not be triggered
and the subtest will fail.
To reduce the chances where the underlying process is not
the intended one, this patch boosted scheduling priority to
-20 (highest allowed by setpriority() call). And I did
10 runs with on-demand libbpf CI with this patch and I
didn't observe any failures.
[1] https://github.com/libbpf/libbpf/actions/workflows/ondemand.yml
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210817190923.3186725-1-yhs@fb.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 95413846cca37f20000dd095cf6d91f8777129d7 ]
The program type cannot be deduced from 'tx' which causes an invalid
argument error when trying to load xdp_tx.o using the skeleton.
Rename the section name to "xdp" so that libbpf can deduce the type.
Signed-off-by: Jussi Maki <joamaki@gmail.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210731055738.16820-7-joamaki@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 043c5bb3c4f43670ab4fea0b847373ab42d25f3e ]
When loading in parallel multiple programs which use the same to-be
pinned map, it is possible that two instances of the loader will call
bpf_object__create_maps() at the same time. If the map doesn't exist
when both instances call bpf_object__reuse_map(), then one of the
instances will fail with EEXIST when calling bpf_map__pin().
Fix the race by retrying reusing a map if bpf_map__pin() returns
EEXIST. The fix is similar to the one in iproute2: e4c4685fd6e4 ("bpf:
Fix race condition with map pinning").
Before retrying the pinning, we don't do any special cleaning of an
internal map state. The closer code inspection revealed that it's not
required:
- bpf_object__create_map(): map->inner_map is destroyed after a
successful call, map->fd is closed if pinning fails.
- bpf_object__populate_internal_map(): created map elements is
destroyed upon close(map->fd).
- init_map_slots(): slots are freed after their initialization.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210726152001.34845-1-m@lambda.lt
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 97eb31384af943d6b97eb5947262cee4ef25cb87 ]
When loading a BPF program with a pinned map, the loader checks whether
the pinned map can be reused, i.e. their properties match. To derive
such of the pinned map, the loader invokes BPF_OBJ_GET_INFO_BY_FD and
then does the comparison.
Unfortunately, on < 4.12 kernels the BPF_OBJ_GET_INFO_BY_FD is not
available, so loading the program fails with the following error:
libbpf: failed to get map info for map FD 5: Invalid argument
libbpf: couldn't reuse pinned map at
'/sys/fs/bpf/tc/globals/cilium_call_policy': parameter
mismatch"
libbpf: map 'cilium_call_policy': error reusing pinned map
libbpf: map 'cilium_call_policy': failed to create:
Invalid argument(-22)
libbpf: failed to load object 'bpf_overlay.o'
To fix this, fallback to derivation of the map properties via
/proc/$PID/fdinfo/$MAP_FD if BPF_OBJ_GET_INFO_BY_FD fails with EINVAL,
which can be used as an indicator that the kernel doesn't support
the latter.
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210712125552.58705-1-m@lambda.lt
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit b5f7912bb604b47a0fe024560488a7556dce8ee7 upstream.
Default to prefixed pkg-config when crosscompiling, this matches what
other parts of the tools/ directory already do.
[dlezcano] : Reworked description
Signed-off-by: Rolf Eike Beer <eb@emlix.com>
Cc: stable@vger.kernel.org
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: https://lore.kernel.org/r/31302992.qZodDJZGDc@devpool47
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 210f9df02611cbe641ced3239122b270fd907d86 upstream.
The selftest for ftrace checks some features by checking if the README has
text that states the feature is supported by that kernel. Unfortunately,
this check gives false positives because it many not be checked if there's
spaces in the string to check. This is due to the compare between the
required variable with the ":README" string stripped, because neither has
quotes around them.
Link: https://lkml.kernel.org/r/20210820204742.087177341@goodmis.org
Cc: "Tzvetomir Stoyanov" <tz.stoyanov@gmail.com>
Cc: Tom Zanussi <zanussi@kernel.org>
Cc: Shuah Khan <shuah@kernel.org>
Cc: Shuah Khan <skhan@linuxfoundation.org>
Cc: linux-kselftest@vger.kernel.org
Cc: stable@vger.kernel.org
Fixes: 1b8eec510b ("selftests/ftrace: Support ":README" suffix for requires")
Acked-by: Masami Hiramatsu <mhiramat@kernel.org>
Signed-off-by: Steven Rostedt (VMware) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 61c7aa5020e98ac2fdcf07d07eec1baf2e9f0a08 ]
Ensure libbpf.so is re-built whenever libbpf.map is modified. Without this,
changes to libbpf.map are not detected and versioned symbols mismatch error
will be reported until `make clean && make` is used, which is a suboptimal
developer experience.
Fixes: 306b267cb3 ("libbpf: Verify versioned symbols")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210815070609.987780-8-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d164dd9a5c08c16a883b3de97d13948c7be7fa4d ]
The "probed" part of test_core_autosize copies an integer using
bpf_core_read() into an integer of a potentially different size.
On big-endian machines a destination offset is required for this to
produce a sensible result.
Fixes: 888d83b961 ("selftests/bpf: Validate libbpf's auto-sizing of LD/ST/STX instructions")
Signed-off-by: Ilya Leoshkevich <iii@linux.ibm.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/20210812224814.187460-1-iii@linux.ibm.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 277b134057036df8c657079ca92c3e5e7d10aeaf ]
Currently, this test is incorrectly printing the destination port in
place of the destination IP.
Fixes: 2767c97765 ("selftests/bpf: Implement sample tcp/tcp6 bpf_iter programs")
Signed-off-by: Jose Blanquicet <josebl@microsoft.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Yonghong Song <yhs@fb.com>
Link: https://lore.kernel.org/bpf/20210805164044.527903-1-josebl@microsoft.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a21ab4c59e09c2a9994a6e393b7484e3b3f78a99 ]
If creating an outer map of a BTF-defined map-in-map fails (via
bpf_object__create_map()), then the previously created its inner map
won't be destroyed.
Fix this by ensuring that the destroy routines are not bypassed in the
case of a failure.
Fixes: 646f02ffdd ("libbpf: Add BTF-defined map-in-map support")
Reported-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Martynas Pumputis <m@lambda.lt>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Acked-by: John Fastabend <john.fastabend@gmail.com>
Link: https://lore.kernel.org/bpf/20210719173838.423148-2-m@lambda.lt
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18353c87e0e0440d4c7c746ed740738bbc1b538e ]
If the strdup() fails then we need to call bpf_object__close(obj) to
avoid a resource leak.
Fixes: 166750bc1d ("libbpf: Support libbpf-provided extern variables")
Signed-off-by: Shuyi Cheng <chengshuyi@linux.alibaba.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Link: https://lore.kernel.org/bpf/1626180159-112996-3-git-send-email-chengshuyi@linux.alibaba.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1f0e6edcd968ff19211245f7da6039e983aa51e5 upstream.
Considering the following testcase:
int
foo(int a, int b)
{
for (unsigned i = 0; i < 1000000000; i++)
a += b;
return a;
}
int main()
{
foo (3, 4);
return 0;
}
'perf annotate' displays:
86.52 │40055e: → ja 40056c <foo(int, int)+0x26>
13.37 │400560: mov -0x18(%rbp),%eax
│400563: add %eax,-0x14(%rbp)
│400566: addl $0x1,-0x4(%rbp)
0.11 │40056a: → jmp 400557 <foo(int, int)+0x11>
│40056c: mov -0x14(%rbp),%eax
│40056f: pop %rbp
and the 'ja 40056c' does not link to the location in the function. It's
caused by fact that comma is wrongly parsed, it's part of function
signature.
With my patch I see:
86.52 │ ┌──ja 26
13.37 │ │ mov -0x18(%rbp),%eax
│ │ add %eax,-0x14(%rbp)
│ │ addl $0x1,-0x4(%rbp)
0.11 │ │↑ jmp 11
│26:└─→mov -0x14(%rbp),%eax
and 'o' output prints:
86.52 │4005┌── ↓ ja 40056c <foo(int, int)+0x26>
13.37 │4005│0: mov -0x18(%rbp),%eax
│4005│3: add %eax,-0x14(%rbp)
│4005│6: addl $0x1,-0x4(%rbp)
0.11 │4005│a: ↑ jmp 400557 <foo(int, int)+0x11>
│4005└─→ mov -0x14(%rbp),%eax
On the contrary, compiling the very same file with gcc -x c, the parsing
is fine because function arguments are not displayed:
jmp 400543 <foo+0x1d>
Committer testing:
Before:
$ cat cpp_args_annotate.c
int
foo(int a, int b)
{
for (unsigned i = 0; i < 1000000000; i++)
a += b;
return a;
}
int main()
{
foo (3, 4);
return 0;
}
$ gcc --version |& head -1
gcc (GCC) 10.2.1 20201125 (Red Hat 10.2.1-9)
$ gcc -g cpp_args_annotate.c -o cpp_args_annotate
$ perf record ./cpp_args_annotate
[ perf record: Woken up 2 times to write data ]
[ perf record: Captured and wrote 0.275 MB perf.data (7188 samples) ]
$ perf annotate --stdio2 foo
Samples: 7K of event 'cycles:u', 4000 Hz, Event count (approx.): 7468429289, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo>:
foo():
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
↓ jmp 1d
a += b;
13.45 13: mov -0x18(%rbp),%eax
add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.09 1d: cmpl $0x3b9ac9ff,-0x4(%rbp)
86.46 ↑ jbe 13
return a;
mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
I.e. works for C, now lets switch to C++:
$ g++ -g cpp_args_annotate.c -o cpp_args_annotate
$ perf record ./cpp_args_annotate
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.268 MB perf.data (6976 samples) ]
$ perf annotate --stdio2 foo
Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo(int, int)>:
foo(int, int):
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
cmpl $0x3b9ac9ff,-0x4(%rbp)
86.53 → ja 40112c <foo(int, int)+0x26>
a += b;
13.32 mov -0x18(%rbp),%eax
0.00 add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.15 → jmp 401117 <foo(int, int)+0x11>
return a;
mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
Reproduced.
Now with this patch:
Reusing the C++ built binary, as we can see here:
$ readelf -wi cpp_args_annotate | grep producer
<c> DW_AT_producer : (indirect string, offset: 0x2e): GNU C++14 10.2.1 20201125 (Red Hat 10.2.1-9) -mtune=generic -march=x86-64 -g
$
And furthermore:
$ file cpp_args_annotate
cpp_args_annotate: ELF 64-bit LSB executable, x86-64, version 1 (SYSV), dynamically linked, interpreter /lib64/ld-linux-x86-64.so.2, BuildID[sha1]=4fe3cab260204765605ec630d0dc7a7e93c361a9, for GNU/Linux 3.2.0, with debug_info, not stripped
$ perf buildid-list -i cpp_args_annotate
4fe3cab260204765605ec630d0dc7a7e93c361a9
$ perf buildid-list | grep cpp_args_annotate
4fe3cab260204765605ec630d0dc7a7e93c361a9 /home/acme/c/cpp_args_annotate
$
It now works:
$ perf annotate --stdio2 foo
Samples: 6K of event 'cycles:u', 4000 Hz, Event count (approx.): 7380681761, [percent: local period]
foo() /home/acme/c/cpp_args_annotate
Percent
0000000000401106 <foo(int, int)>:
foo(int, int):
int
foo(int a, int b)
{
push %rbp
mov %rsp,%rbp
mov %edi,-0x14(%rbp)
mov %esi,-0x18(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
movl $0x0,-0x4(%rbp)
11: cmpl $0x3b9ac9ff,-0x4(%rbp)
86.53 ↓ ja 26
a += b;
13.32 mov -0x18(%rbp),%eax
0.00 add %eax,-0x14(%rbp)
for (unsigned i = 0; i < 1000000000; i++)
addl $0x1,-0x4(%rbp)
0.15 ↑ jmp 11
return a;
26: mov -0x14(%rbp),%eax
}
pop %rbp
← retq
$
Signed-off-by: Martin Liška <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Jiri Slaby <jslaby@suse.cz>
Link: http://lore.kernel.org/lkml/13e1a405-edf9-e4c2-4327-a9b454353730@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 41d585411311abf187e5f09042978fe7073a9375 upstream.
I got several memory leak reports from Asan with a simple command. It
was because VDSO is not released due to the refcount. Like in
__dsos_addnew_id(), it should put the refcount after adding to the list.
$ perf record true
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.030 MB perf.data (10 samples) ]
=================================================================
==692599==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 439 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce4aa8ee in dso__new_id util/dso.c:1256
#2 0x559bce59245a in __machine__addnew_vdso util/vdso.c:132
#3 0x559bce59245a in machine__findnew_vdso util/vdso.c:347
#4 0x559bce50826c in map__new util/map.c:175
#5 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#6 0x559bce512f6b in machines__deliver_event util/session.c:1481
#7 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#8 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#9 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#10 0x559bce519bea in __perf_session__process_events util/session.c:2268
#11 0x559bce519bea in perf_session__process_events util/session.c:2297
#12 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#13 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#14 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#15 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#16 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#17 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#18 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#19 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#20 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
Indirect leak of 32 byte(s) in 1 object(s) allocated from:
#0 0x7fea52341037 in __interceptor_calloc ../../../../src/libsanitizer/asan/asan_malloc_linux.cpp:154
#1 0x559bce520907 in nsinfo__copy util/namespaces.c:169
#2 0x559bce50821b in map__new util/map.c:168
#3 0x559bce503c92 in machine__process_mmap2_event util/machine.c:1787
#4 0x559bce512f6b in machines__deliver_event util/session.c:1481
#5 0x559bce515107 in perf_session__deliver_event util/session.c:1551
#6 0x559bce51d4d2 in do_flush util/ordered-events.c:244
#7 0x559bce51d4d2 in __ordered_events__flush util/ordered-events.c:323
#8 0x559bce519bea in __perf_session__process_events util/session.c:2268
#9 0x559bce519bea in perf_session__process_events util/session.c:2297
#10 0x559bce2e7a52 in process_buildids /home/namhyung/project/linux/tools/perf/builtin-record.c:1017
#11 0x559bce2e7a52 in record__finish_output /home/namhyung/project/linux/tools/perf/builtin-record.c:1234
#12 0x559bce2ed4f6 in __cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2026
#13 0x559bce2ed4f6 in cmd_record /home/namhyung/project/linux/tools/perf/builtin-record.c:2858
#14 0x559bce422db4 in run_builtin /home/namhyung/project/linux/tools/perf/perf.c:313
#15 0x559bce2acac8 in handle_internal_command /home/namhyung/project/linux/tools/perf/perf.c:365
#16 0x559bce2acac8 in run_argv /home/namhyung/project/linux/tools/perf/perf.c:409
#17 0x559bce2acac8 in main /home/namhyung/project/linux/tools/perf/perf.c:539
#18 0x7fea51e76d09 in __libc_start_main ../csu/libc-start.c:308
SUMMARY: AddressSanitizer: 471 byte(s) leaked in 2 allocation(s).
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/20210315045641.700430-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 67069a1f0fe5f9eeca86d954fff2087f5542a008 upstream.
ASan reported a memory leak caused by info_linear not being deallocated.
The info_linear was allocated during in perf_event__synthesize_one_bpf_prog().
This patch adds the corresponding free() when bpf_prog_info_node
is freed in perf_env__purge_bpf().
$ sudo ./perf record -- sleep 5
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.025 MB perf.data (8 samples) ]
=================================================================
==297735==ERROR: LeakSanitizer: detected memory leaks
Direct leak of 7688 byte(s) in 19 object(s) allocated from:
#0 0x4f420f in malloc (/home/user/linux/tools/perf/perf+0x4f420f)
#1 0xc06a74 in bpf_program__get_prog_info_linear /home/user/linux/tools/lib/bpf/libbpf.c:11113:16
#2 0xb426fe in perf_event__synthesize_one_bpf_prog /home/user/linux/tools/perf/util/bpf-event.c:191:16
#3 0xb42008 in perf_event__synthesize_bpf_events /home/user/linux/tools/perf/util/bpf-event.c:410:9
#4 0x594596 in record__synthesize /home/user/linux/tools/perf/builtin-record.c:1490:8
#5 0x58c9ac in __cmd_record /home/user/linux/tools/perf/builtin-record.c:1798:8
#6 0x58990b in cmd_record /home/user/linux/tools/perf/builtin-record.c:2901:8
#7 0x7b2a20 in run_builtin /home/user/linux/tools/perf/perf.c:313:11
#8 0x7b12ff in handle_internal_command /home/user/linux/tools/perf/perf.c:365:8
#9 0x7b2583 in run_argv /home/user/linux/tools/perf/perf.c:409:2
#10 0x7b0d79 in main /home/user/linux/tools/perf/perf.c:539:3
#11 0x7fa357ef6b74 in __libc_start_main /usr/src/debug/glibc-2.33-8.fc34.x86_64/csu/../csu/libc-start.c:332:16
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Ian Rogers <irogers@google.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Andrii Nakryiko <andrii@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: John Fastabend <john.fastabend@gmail.com>
Cc: KP Singh <kpsingh@kernel.org>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Song Liu <songliubraving@fb.com>
Cc: Yonghong Song <yhs@fb.com>
Link: http://lore.kernel.org/lkml/20210602224024.300485-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Hanjun Guo <guohanjun@huawei.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a24ce06c70fe7df795a846ad713ccaa9b56a7666 ]
We use a spinlock now so add a stub.
Ignore bogus uninitialized variable warnings.
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 78d14bda861dd2729f15bb438fe355b48514bfe0 ]
This patch fixes the probe for BPF_PROG_TYPE_CGROUP_SOCKOPT,
so the probe reports accurate results when used by e.g.
bpftool.
Fixes: 4cdbfb59c4 ("libbpf: support sockopt hooks")
Signed-off-by: Robin Gögge <r.goegge@gmail.com>
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Quentin Monnet <quentin@isovalent.com>
Link: https://lore.kernel.org/bpf/20210728225825.2357586-1-r.goegge@gmail.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
This reverts commit 19eaad1400 which is
ee0415681eb661efa1eb2db7acc263f2c7df1e23 upstream.
This commit is not a stable candidate and was backported without needed
dependencies that results in the resctrl tests unable to compile.
Signed-off-by: Reinette Chatre <reinette.chatre@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7a22930c4179b51352f2ec9feb35167cbe79afd9 upstream
Add tests for the new functionality - reading and writing to the stack
through a variable-offset pointer.
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210207011027.676572-4-andreimatei1@gmail.com
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 973377ffe8148180b2651825b92ae91988141b05 upstream
In almost all cases from test_verifier that have been changed in here, we've
had an unreachable path with a load from a register which has an invalid
address on purpose. This was basically to make sure that we never walk this
path and to have the verifier complain if it would otherwise. Change it to
match on the right error for unprivileged given we now test these paths
under speculative execution.
There's one case where we match on exact # of insns_processed. Due to the
extra path, this will of course mismatch on unprivileged. Thus, restrict the
test->insn_processed check to privileged-only.
In one other case, we result in a 'pointer comparison prohibited' error. This
is similarly due to verifying an 'invalid' branch where we end up with a value
pointer on one side of the comparison.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d7a5091351756d0ae8e63134313c455624e36a13 upstream
Update various selftest error messages:
* The 'Rx tried to sub from different maps, paths, or prohibited types'
is reworked into more specific/differentiated error messages for better
guidance.
* The change into 'value -4294967168 makes map_value pointer be out of
bounds' is due to moving the mixed bounds check into the speculation
handling and thus occuring slightly later than above mentioned sanity
check.
* The change into 'math between map_value pointer and register with
unbounded min value' is similarly due to register sanity check coming
before the mixed bounds check.
* The case of 'map access: known scalar += value_ptr from different maps'
now loads fine given masks are the same from the different paths (despite
max map value size being different).
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: John Fastabend <john.fastabend@gmail.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1bad6fd52be4ce12d207e2820ceb0f29ab31fc53 upstream
Given we don't need to simulate the speculative domain for registers with
immediates anymore since the verifier uses direct imm-based rewrites instead
of having to mask, we can also lift a few cases that were previously rejected.
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit a680cb3d8e3f4f84205720b90c926579d04eedb6 upstream
The verifier errors around stack accesses have changed slightly in the
previous commit (generally for the better).
Signed-off-by: Andrei Matei <andreimatei1@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210207011027.676572-3-andreimatei1@gmail.com
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b4b638c36b7e7acd847b9c4b9c80f268e45ea30c upstream
Change bpf_iter_task.c such that pointer to map_value may appear
on the stack for bpf_seq_printf() to access. Without previous
verifier patch, the bpf_iter test will fail.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Song Liu <songliubraving@fb.com>
Link: https://lore.kernel.org/bpf/20201210013350.943985-1-yhs@fb.com
Signed-off-by: Ovidiu Panait <ovidiu.panait@windriver.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9bac1bd6e6d36459087a728a968e79e37ebcea1a upstream.
This makes 'perf top' abort in some cases, and the right fix will
involve surgery that is too much to do at this stage, so revert for now
and fix it in the next merge window.
This reverts commit 2d6b74baa7147251c30a46c4996e8cc224aa2dc5.
Cc: Riccardo Mancini <rickyman7@gmail.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Krister Johansen <kjlx@templeofstupid.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When backporting 0db282ba2c12 ("selftest: use mmap instead of
posix_memalign to allocate memory") to this stable branch, I forgot a {
breaking the build.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f62700ce63a315b4607cc9e97aa15ea409a677b9 upstream.
selftests/bpf/Makefile includes tools/scripts/Makefile.include.
With the following command
make -j60 LLVM=1 LLVM_IAS=1 <=== compile kernel
make -j60 -C tools/testing/selftests/bpf LLVM=1 LLVM_IAS=1 V=1
some files are still compiled with gcc. This patch
fixed the case if CC/AR/LD/CXX/STRIP is allowed to be
overridden, it will be written to clang/llvm-ar/..., instead of
gcc binaries. The definition of CC_NO_CLANG is also relocated
to the place after the above CC is defined.
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20210413153419.3028165-1-yhs@fb.com
Cc: Anders Roxell <anders.roxell@linaro.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 02e6246f5364d5260a6ea6f92ab6f409058b162f upstream.
ASan reports a memory leak when running:
# perf test "83: Zstd perf.data compression/decompression"
which happens inside 'perf inject'.
The bug is caused by inject.output never being closed.
This patch adds the missing perf_data__close().
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 6ef81c55a2 ("perf session: Return error code for perf_session__new() function on failure")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/c06f682afa964687367cf6e92a64ceb49aec76a5.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 0db282ba2c12c1515d490d14a1ff696643ab0f1b upstream.
This test passes pointers obtained from anon_allocate_area to the
userfaultfd and mremap APIs. This causes a problem if the system
allocator returns tagged pointers because with the tagged address ABI
the kernel rejects tagged addresses passed to these APIs, which would
end up causing the test to fail. To make this test compatible with such
system allocators, stop using the system allocator to allocate memory in
anon_allocate_area, and instead just use mmap.
Link: https://lkml.kernel.org/r/20210714195437.118982-3-pcc@google.com
Link: https://linux-review.googlesource.com/id/Icac91064fcd923f77a83e8e133f8631c5b8fc241
Fixes: c47174fc36 ("userfaultfd: selftest")
Co-developed-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Lokesh Gidra <lokeshgidra@google.com>
Signed-off-by: Peter Collingbourne <pcc@google.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Cc: Vincenzo Frascino <vincenzo.frascino@arm.com>
Cc: Dave Martin <Dave.Martin@arm.com>
Cc: Will Deacon <will@kernel.org>
Cc: Andrea Arcangeli <aarcange@redhat.com>
Cc: Alistair Delva <adelva@google.com>
Cc: William McVicker <willmcvicker@google.com>
Cc: Evgenii Stepanov <eugenis@google.com>
Cc: Mitch Phillips <mitchp@google.com>
Cc: Andrey Konovalov <andreyknvl@gmail.com>
Cc: <stable@vger.kernel.org> [5.4]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b0f008551f0bf4d5f6db9b5f0e071b02790d6a2e ]
The tracepoints trace_sched_stat_{wait, sleep, iowait} are not exposed to user
if CONFIG_SCHEDSTATS is not set, "perf sched record" records the three events.
As a result, the command fails.
Before:
#perf sched record sleep 1
event syntax error: 'sched:sched_stat_wait'
\___ unknown tracepoint
Error: File /sys/kernel/tracing/events/sched/sched_stat_wait not found.
Hint: Perhaps this kernel misses some CONFIG_ setting to enable this feature?.
Run 'perf list' for a list of valid events
Usage: perf record [<options>] [<command>]
or: perf record [<options>] -- <command> [<options>]
-e, --event <event> event selector. use 'perf list' to list available events
Solution:
Check whether schedstat tracepoints are exposed. If no, these events are not recorded.
After:
# perf sched record sleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.163 MB perf.data (1091 samples) ]
# perf sched report
run measurement overhead: 4736 nsecs
sleep measurement overhead: 9059979 nsecs
the run test took 999854 nsecs
the sleep test took 8945271 nsecs
nr_run_events: 716
nr_sleep_events: 785
nr_wakeup_events: 0
...
------------------------------------------------------------
Fixes: 2a09b5de23 ("sched/fair: do not expose some tracepoints to user if CONFIG_SCHEDSTATS is not set")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt (VMware) <rostedt@goodmis.org>
Cc: Yafang Shao <laoar.shao@gmail.com>
Link: http://lore.kernel.org/lkml/20210713112358.194693-1-yangjihong1@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d4b3eedce151e63932ce4a00f1d0baa340a8b907 ]
When using 'perf report' in directory mode, the first file is not closed
on exit, causing a memory leak.
The problem is caused by the iterating variable never reaching 0.
Fixes: 1455206311 ("perf data: Add perf_data__(create_dir|close_dir) functions")
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Zhen Lei <thunder.leizhen@huawei.com>
Link: http://lore.kernel.org/lkml/20210716141122.858082-1-rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e0fa7ab42232e742dcb3de9f3c1f6127b5adc019 ]
ASan reports some memory leaks when running:
# perf test "42: BPF filter"
This second leak is caused by a strlist not being dellocated on error
inside probe_file__del_events.
This patch adds a goto label before the deallocation and makes the error
path jump to it.
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: e7895e422e ("perf probe: Split del_perf_probe_events()")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/174963c587ae77fa108af794669998e4ae558338.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f8cbb0f926ae1e1fb5f9e51614e5437560ed4039 ]
ASan reports memory leaks when running:
# perf test "88: Check open filename arg using perf trace + vfs_getname"
One of these is caused by the lzma stream never being closed inside
lzma_decompress_to_file().
This patch adds the missing lzma_end().
Signed-off-by: Riccardo Mancini <rickyman7@gmail.com>
Fixes: 80a32e5b49 ("perf tools: Add lzma decompression support for kernel module")
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lore.kernel.org/lkml/aaf50bdce7afe996cfc06e1bbb36e4a2a9b9db93.1626343282.git.rickyman7@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
