If the STXR instruction fails in the SWP emulation code, we leave *data
overwritten with the loaded value, therefore corrupting the data written
by a subsequent, successful attempt.
This patch re-jigs the code so that we only write back to *data once we
know that the update has happened.
Cc: <stable@vger.kernel.org>
Fixes: bd35a4adc413 ("arm64: Port SWP/SWPB emulation support from arm")
Reported-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Reported-by: Vladimir Murzin <vladimir.murzin@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
That way a single flip of phys_addr_t to 64 bit ensures all places
dealing with physical addresses get correct data
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Implement kmap* API for ARC.
This enables
- permanent kernel maps (pkmaps): :kmap() API
- fixmap : kmap_atomic()
We use a very simple/uniform approach for both (unlike some of the other
arches). So fixmap doesn't use the customary compile time address stuff.
The important semantic is sleep'ability (pkmap) vs. not (fixmap) which
the API guarantees.
Note that this patch only enables highmem for subsequent PAE40 support
as there is no real highmem for ARC in pure 32-bit paradigm as explained
below.
ARC has 2:2 address split of the 32-bit address space with lower half
being translated (virtual) while upper half unstranslated
(0x8000_0000 to 0xFFFF_FFFF). kernel itself is linked at base of
unstranslated space (i.e. 0x8000_0000 onwards), which is mapped to say
DDR 0x0 by external Bus Glue logic (outside the core). So kernel can
potentially access 1.75G worth of memory directly w/o need for highmem.
(the top 256M is taken by uncached peripheral space from 0xF000_0000 to
0xFFFF_FFFF)
In PAE40, hardware can address memory beyond 4G (0x1_0000_0000) while
the logical/virtual addresses remain 32-bits. Thus highmem is required
for kernel proper to be able to access these pages for it's own purposes
(user space is agnostic to this anyways).
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Before we plug in highmem support, some of code needs to be ready for it
- copy_user_highpage() needs to be using the kmap_atomic API
- mk_pte() can't assume page_address()
- do_page_fault() can't assume VMALLOC_END is end of kernel vaddr space
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
- Move the verbosity knob from .data to .bss by using inverted logic
- No need to readout PD1 descriptor
- clip the non pfn bits of PD0 to avoid clipping inside the loop
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
We have been getting away with using a void* for the physical
address of the UEFI memory map, since, even on 32-bit platforms
with 64-bit physical addresses, no truncation takes place if the
memory map has been allocated by the firmware (which only uses
1:1 virtually addressable memory), which is usually the case.
However, commit:
0f96a99dab36 ("efi: Add "efi_fake_mem" boot option")
adds code that clones and modifies the UEFI memory map, and the
clone may live above 4 GB on 32-bit platforms.
This means our use of void* for struct efi_memory_map::phys_map has
graduated from 'incorrect but working' to 'incorrect and
broken', and we need to fix it.
So redefine struct efi_memory_map::phys_map as phys_addr_t, and
get rid of a bunch of casts that are now unneeded.
Signed-off-by: Ard Biesheuvel <ard.biesheuvel@linaro.org>
Reviewed-by: Matt Fleming <matt@codeblueprint.co.uk>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: izumi.taku@jp.fujitsu.com
Cc: kamezawa.hiroyu@jp.fujitsu.com
Cc: linux-efi@vger.kernel.org
Cc: matt.fleming@intel.com
Link: http://lkml.kernel.org/r/1445593697-1342-1-git-send-email-ard.biesheuvel@linaro.org
Signed-off-by: Ingo Molnar <mingo@kernel.org>
With prev fixes, all cores now start via common entry point @stext which
already calls EARLY_CPU_SETUP for all cores - so no need to invoke it
again
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
MCIP now registers it's own per cpu setup routine (for IPI IRQ request)
using smp_ops.init_irq_cpu().
So no need for platforms to do that. This now completely decouples
platforms from MCIP.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
Note this is not part of platform owned static machine_desc,
but more of device owned plat_smp_ops (rather misnamed) which a IPI
provider or some such typically defines.
This will help us seperate out the IPI registration from platform
specific init_cpu_smp() into device specific init_irq_cpu()
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
MCIP now registers it's own probe callback with smp_ops.init_early_smp()
which is called by ARC common code, so no need for platforms to do that.
This decouples the platforms and MCIP and helps confine MCIP details
to it's own file.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
This adds a platform agnostic early SMP init hook which is called on
Master core before calling setup_processor()
setup_arch()
smp_init_cpus()
smp_ops.init_early_smp()
...
setup_processor()
How this helps:
- Used for one time init of certain SMP centric IP blocks, before
calling setup_processor() which probes various bits of core,
possibly including this block
- Currently platforms need to call this IP block init from their
init routines, which doesn't make sense as this is specific to ARC
core and not platform and otherwise requires copy/paste in all
(and hence a possible point of failure)
e.g. MCIP init is called from 2 platforms currently (axs10x and sim)
which will go away once we have this.
This change only adds the hooks but they are empty for now. Next commit
will populate them and remove the explicit init calls from platforms.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
These are not in use for ARC platforms. Moreover DT mechanims exist to
probe them w/o explicit platform calls.
- clocksource drivers can use CLOCKSOURCE_OF_DECLARE()
- intc IRQCHIP_DECLARE() calls + cascading inside DT allows external
intc to be probed automatically
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
The reason this was not done so far was lack of genuine IPI_IRQ for
ARC700, as we don't have a SMP version of core yet (which might change
soon thx to EZChip). Nevertheles to increase the build coverage, we
need to allow CONFIG_SMP for ARC700 and still be able to run it on a
UP platform (nsim or AXS101) with a UP Device Tree (SMP-on-UP)
The build itself requires some define for IPI_IRQ and even a dummy
value is fine since that code won't run anyways.
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
For Run-on-reset, non masters need to spin wait. For Halt-on-reset they
can jump to entry point directly.
Also while at it, made reset vector handler as "the" entry point for
kernel including host debugger based boot (which uses the ELF header
entry point)
Signed-off-by: Vineet Gupta <vgupta@synopsys.com>
- powerpc/dma: dma_set_coherent_mask() should not be GPL only from Ben
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=sFFh
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fix from Michael Ellerman:
- powerpc/dma: dma_set_coherent_mask() should not be GPL only from Ben
* tag 'powerpc-4.3-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/dma: dma_set_coherent_mask() should not be GPL only
When turning this from inline to an exported function I was a bit
over-eager and made it GPL only. This prevents the use of pretty much
all non-GPL PCI driver which is a bit over the top. Let's bring it
back in line with other architecture.
Fixes: 817820b0226a ("powerpc/iommu: Support "hybrid" iommu/direct DMA ops for coherent_mask < dma_mask")
Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Pull ARM fixes from Russell King:
"Two fixes for ARM and one for clkdev:
- Fix another build issue with vdsomunge on non-glibc systems
- Fix a randconfig build error caused by an invalid configuration
- Fix a clkdev problem causing the Nokia n700 to no longer boot"
* 'fixes' of git://ftp.arm.linux.org.uk/~rmk/linux-arm:
clkdev: fix clk_add_alias() with a NULL alias device name
ARM: 8445/1: fix vdsomunge not to depend on glibc specific byteswap.h
ARM: make RiscPC depend on MMU
__pa() in the x86 pageattr code. Since these virtual addreses are
not part of the direct mapping or kernel text mapping, passing them
to __pa() will trigger a BUG_ON() when CONFIG_DEBUG_VIRTUAL is
enabled - Sai Praneeth Prakhya
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2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=xdZV
-----END PGP SIGNATURE-----
Merge tag 'efi-next' of git://git.kernel.org/pub/scm/linux/kernel/git/mfleming/efi into core/efi
Pull EFI fix from Matt Fleming:
- Fix a kernel panic by not passing EFI virtual mapping addresses to
__pa() in the x86 pageattr code. Since these virtual addreses are
not part of the direct mapping or kernel text mapping, passing them
to __pa() will trigger a BUG_ON() when CONFIG_DEBUG_VIRTUAL is
enabled. (Sai Praneeth Prakhya)
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Commit 4857c91f0d19 changed the way how irq affinity is setup in
setup_ioapic_dest() from using the core helper function to
unconditionally calling the irq_set_affinity() callback of the
underlying irq chip.
That results in a NULL pointer dereference for the rare case where the
underlying irq chip is lapic_chip which has no irq_set_affinity()
callback. lapic_chip is occasionally used for the timer interrupt (irq
0).
The fix is simple: Check the availability of the callback instead of
calling it unconditionally.
Fixes: 4857c91f0d19 "x86/ioapic: Force affinity setting in setup_ioapic_dest()"
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Joachim Eastwood <manabian@gmail.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Wei Xu <xuwei5@hisilicon.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Krzysztof Kozlowski <k.kozlowski@samsung.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Vineet Gupta <vgupta@synopsys.com>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
DesignWare MMC Controller's transfer mode should be decided
at runtime instead of compile-time. So we remove this config
option and read dw_mmc's register to select DMA master.
Signed-off-by: Shawn Lin <shawn.lin@rock-chips.com>
Acked-by: Govindraj Raja <govindraj.raja@imgtec.com>
Acked-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: Jaehoon Chung <jh80.chung@samsung.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
This allows the tuning code to run and use higher speeds on capable cards.
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
The drive/sample clocks can be phase shifted. The drive clock
could be used in a future patch to adjust hold times. The sample
clock is used for tuning.
Signed-off-by: Alexandru M Stan <amstan@chromium.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
for_each_child_of_node performs an of_node_get on each iteration, so
a break out of the loop requires an of_node_put.
The of_node_put is duplicated in front of each error return, because the
function contains a later error return that is beyond the end of the
for_each_child_of_node and thus doesn't need of_node_put.
The semantic patch that fixes this problem is as follows
(http://coccinelle.lip6.fr):
// <smpl>
@@
expression root,e;
local idexpression child;
iterator name for_each_child_of_node;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
(
return child;
|
+ of_node_put(child);
? return ...;
)
...
}
@@
expression root,e;
local idexpression child;
@@
for_each_child_of_node(root, child) {
... when != of_node_put(child)
when != e = child
+ of_node_put(child);
? break;
...
}
... when != child
// </smpl>
Additionally, concatenated a string in an affected line to avoid introducing
a checkpatch warning.
Signed-off-by: Julia Lawall <Julia.Lawall@lip6.fr>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Commit 6894258eda2f broke drivers that pass NULL as the device pointer
to dma_alloc. The reason is that arch_dma_alloc_attrs() now calls
dma_alloc_coherent_gfp_flags() which in turn calls
dma_alloc_coherent_mask(), where the device pointer is dereferenced
unconditionally.
Fix things by moving the ISA DMA fallback device assignment before the
call to dma_alloc_coherent_gfp_flags().
Fixes: 6894258eda2f ("dma-mapping: consolidate dma_{alloc,free}_{attrs,coherent}")
Reported-and-tested-by: Meelis Roos <mroos@linux.ee>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Christoph Hellwig <hch@lst.de>
Link: http://lkml.kernel.org/r/1445807503-8920-1-git-send-email-ville.syrjala@linux.intel.com
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
When CONFIG_DEBUG_VIRTUAL is enabled, all accesses to __pa(address) are
monitored to see whether address falls in direct mapping or kernel text
mapping (see Documentation/x86/x86_64/mm.txt for details), if it does
not, the kernel panics. During 1:1 mapping of EFI runtime services we access
virtual addresses which are == physical addresses, thus the 1:1 mapping
and these addresses do not fall in either of the above two regions and
hence when passed as arguments to __pa() kernel panics as reported by
Dave Hansen here https://lkml.kernel.org/r/5462999A.7090706@intel.com.
So, before calling __pa() virtual addresses should be validated which
results in skipping call to split_page_count() and that should be fine
because it is used to keep track of everything *but* 1:1 mappings.
Signed-off-by: Sai Praneeth Prakhya <sai.praneeth.prakhya@intel.com>
Reported-by: Dave Hansen <dave.hansen@intel.com>
Reviewed-by: Borislav Petkov <bp@suse.de>
Cc: Ricardo Neri <ricardo.neri@intel.com>
Cc: Glenn P Williamson <glenn.p.williamson@intel.com>
Cc: Ravi Shankar <ravi.v.shankar@intel.com>
Signed-off-by: Matt Fleming <matt@codeblueprint.co.uk>
Pull x86 fixes from Ingo Molnar:
"Misc fixes: two KASAN fixes, two EFI boot fixes, two boot-delay
optimization fixes, and a fix for a IRQ handling hang observed on
virtual platforms"
* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm, kasan: Silence KASAN warnings in get_wchan()
compiler, atomics, kasan: Provide READ_ONCE_NOCHECK()
x86, kasan: Fix build failure on KASAN=y && KMEMCHECK=y kernels
x86/smpboot: Fix CPU #1 boot timeout
x86/smpboot: Fix cpu_init_udelay=10000 corner case boot parameter misbehavior
x86/ioapic: Disable interrupts when re-routing legacy IRQs
x86/setup: Extend low identity map to cover whole kernel range
x86/efi: Fix multiple GOP device support
- Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8" from Paul
- Handle irq_happened flag correctly in off-line loop from Paul
- Validate rtas.entry before calling enter_rtas() from Vasant
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=K7eA
-----END PGP SIGNATURE-----
Merge tag 'powerpc-4.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux
Pull powerpc fixes from Michael Ellerman:
- Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on
POWER8" from Paul
- Handle irq_happened flag correctly in off-line loop from Paul
- Validate rtas.entry before calling enter_rtas() from Vasant
* tag 'powerpc-4.3-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/rtas: Validate rtas.entry before calling enter_rtas()
powerpc/powernv: Handle irq_happened flag correctly in off-line loop
powerpc: Revert "Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8"
Most of the changes this time are for incorrect device nodes in various
ways, on on imx, berlin, exynos, ux500, uniphier, omap and meson.
Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner).
Other bug fixes include
* a partial revert of a broken tegra gpio patch
* irq affinity for arm ccn
* suspend on one Armada 385 machine
* enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM
* turning on a regulator on beagleboard-x15 for HDMI
* making the omap gpmc debug code visible
* setup of orion network switch
* a rare build regression for pxa
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=3g0Z
-----END PGP SIGNATURE-----
Merge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for incorrect device nodes in
various ways, on on imx, berlin, exynos, ux500, uniphier, omap and
meson.
Chen-Yu Tsai now co-maintains mach-sunxi (Allwinner).
Other bug fixes include
- a partial revert of a broken tegra gpio patch
- irq affinity for arm ccn
- suspend on one Armada 385 machine
- enable ZONE_DMA to avoid an OMAP crash for over 2GB RAM
- turning on a regulator on beagleboard-x15 for HDMI
- making the omap gpmc debug code visible
- setup of orion network switch
- a rare build regression for pxa"
* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: (22 commits)
ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init
thermal: exynos: Fix register read in TMU
ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
ARM: tegra: Comment out gpio-ranges properties
ARM: dts: uniphier: fix IRQ number for devices on PH1-LD6b ref board
drivers/perf: arm_pmu: avoid CPU device_node reference leak
bus: arm-ccn: Fix irq affinity setting on CPU migration
bus: arm-ccn: Handle correctly no-more-cpus case
ARM: mvebu: correct a385-db-ap compatible string
ARM: meson6: DTS: Fix wrong reg mapping and IRQ numbers
MAINTAINERS: Update Allwinner entry and add new maintainer
ARM: ux500: modify initial levelshifter status
ARM: pxa: fix pxa3xx DFI lockup hack
Documentation: ARM: List new omap MMC requirements
memory: omap-gpmc: dump "before" state before first modification
memory: omap-gpmc: Fix unselectable debug option for GPMC
ARM: dts: am57xx-beagle-x15: set VDD_SD to always-on
ARM: dts: Fix audio card detection on Peach boards
ARM: EXYNOS: Fix double of_node_put() when parsing child power domains
ARM: orion: Fix DSA platform device after mvmdio conversion
...
The keyboard driver for GPIO buttons(gpio-keys) checks for one of the
two boolean properties to enable gpio buttons as wakeup source:
1. "wakeup-source" or
2. the legacy "gpio-key,wakeup"
However juno, ste-snowball and emev2-kzm9d dts file have a undetected
"wakeup" property to indictate the wakeup source.
This patch fixes it by making use of "wakeup-source" property.
Cc: Magnus Damm <magnus.damm@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Currently we do not validate rtas.entry before calling enter_rtas(). This
leads to a kernel oops when user space calls rtas system call on a powernv
platform (see below). This patch adds code to validate rtas.entry before
making enter_rtas() call.
Oops: Exception in kernel mode, sig: 4 [#1]
SMP NR_CPUS=1024 NUMA PowerNV
task: c000000004294b80 ti: c0000007e1a78000 task.ti: c0000007e1a78000
NIP: 0000000000000000 LR: 0000000000009c14 CTR: c000000000423140
REGS: c0000007e1a7b920 TRAP: 0e40 Not tainted (3.18.17-340.el7_1.pkvm3_1_0.2400.1.ppc64le)
MSR: 1000000000081000 <HV,ME> CR: 00000000 XER: 00000000
CFAR: c000000000009c0c SOFTE: 0
NIP [0000000000000000] (null)
LR [0000000000009c14] 0x9c14
Call Trace:
[c0000007e1a7bba0] [c00000000041a7f4] avc_has_perm_noaudit+0x54/0x110 (unreliable)
[c0000007e1a7bd80] [c00000000002ddc0] ppc_rtas+0x150/0x2d0
[c0000007e1a7be30] [c000000000009358] syscall_exit+0x0/0x98
Cc: stable@vger.kernel.org # v3.2+
Fixes: 55190f88789a ("powerpc: Add skeleton PowerNV platform")
Reported-by: NAGESWARA R. SASTRY <nasastry@in.ibm.com>
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[mpe: Reword change log, trim oops, and add stable + fixes]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
- A bug where level-triggered interrupts lowered from userspace
are still routed to the guest
- A memory leak an a failed initialization path
- A build error under certain configurations
- Several timer bugs introduced with moving the timer to the active
state handling instead of the masking trick.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iQEbBAABAgAGBQJWJmf7AAoJEEtpOizt6ddy35UH+NCAt1AInvQajAB1rzXzFSYh
v9PQ5zJ7ZlP8M3HFYjerSl0HrGbi2Cwij5KYE+UAQkXIzCTTdDeB9TUSI/GYQ82M
axel8Ob3deELp03nS5I+gP1NGX3HPDz445grScg7yl1lMs3uDy4viDDM8Vm8+HUX
zZWGpDRHNW3b0myS5NVJvOP7Sm5t7DqklsNScZ04Nut7V8gYEUqEu+ZNKerIZkKn
LrJUVYqqZf33bf6pWle95QZuNQtg84kion3qwWaNl+/8jFkAA8CODyvzar9VMHpf
xA0xUkK1ERZ+hw2n0/BIgCxI4lXvROAx0YpZKnSMgEU5E5p5gGZYqlHCw8r1Rw==
=VQSu
-----END PGP SIGNATURE-----
Merge tag 'kvm-arm-for-v4.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into kvm-master
A late round of KVM/ARM fixes for v4.3-rc7, fixing:
- A bug where level-triggered interrupts lowered from userspace
are still routed to the guest
- A memory leak an a failed initialization path
- A build error under certain configurations
- Several timer bugs introduced with moving the timer to the active
state handling instead of the masking trick.
Fix wrong compatible for A385 DB AP preventing using suspend
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1
iEYEABECAAYFAlYhNEwACgkQCwYYjhRyO9XX9gCgnabcvdHrfFqAD3IFICLCgkOM
U1AAnReiDUjcUhz6oTl6I2+e3PLHY7RO
=BkFw
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-4.3-2' of git://git.infradead.org/linux-mvebu into fixes
Merge "mvebu fixes for 4.3 (part 2)" from Gregory CLEMENT:
Fix wrong compatible for A385 DB AP preventing using suspend
* tag 'mvebu-fixes-4.3-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: correct a385-db-ap compatible string
- Fix oops with LPAE and moew than 2GB of memory by enabling
ZONE_DMA for LPAE. Probably no need for stable on this one as we
only recently ran into this with the mainline kernel
- Fix imprecise external abort caused by bogus SRAM init. This affects
dm814x recently merged, so no need for stable on this one AFAIK
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1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=EP6s
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v4.3/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes
Merge "Fixes for omaps for v4.3-rc cycle" from Tony Lindgren:
- Fix oops with LPAE and moew than 2GB of memory by enabling
ZONE_DMA for LPAE. Probably no need for stable on this one as we
only recently ran into this with the mainline kernel
- Fix imprecise external abort caused by bogus SRAM init. This affects
dm814x recently merged, so no need for stable on this one AFAIK
* tag 'omap-for-v4.3/fixes-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: OMAP2+: Fix imprecise external abort caused by bogus SRAM init
ARM: OMAP2+: Fix oops with LPAE and more than 2GB of memory
This fixes a bug where it is possible for an off-line CPU to fail to go
into a low-power state (nap/sleep/winkle), and to become unresponsive to
requests from the KVM subsystem to wake up and run a VCPU. What can
happen is that a maskable interrupt of some kind (external, decrementer,
hypervisor doorbell, or HMI) after we have called local_irq_disable() at
the beginning of pnv_smp_cpu_kill_self() and before interrupts are
hard-disabled inside power7_nap/sleep/winkle(). In this situation, the
pending event is marked in the irq_happened flag in the PACA. This
pending event prevents power7_nap/sleep/winkle from going to the
requested low-power state; instead they return immediately. We don't
deal with any of these pending event flags in the off-line loop in
pnv_smp_cpu_kill_self() because power7_nap et al. return 0 in this case,
so we will have srr1 == 0, and none of the processing to clear
interrupts or doorbells will be done.
Usually, the most obvious symptom of this is that a KVM guest will fail
with a console message saying "KVM: couldn't grab cpu N".
This fixes the problem by making sure we handle the irq_happened flags
properly. First, we hard-disable before the off-line loop. Once we have
hard-disabled, the irq_happened flags can't change underneath us. We
unconditionally clear the DEC and HMI flags: there is no processing of
timer interrupts while off-line, and the necessary HMI processing is all
done in lower-level code. We leave the EE and DBELL flags alone for the
first iteration of the loop, so that we won't fail to respond to a
split-core request that came in just before hard-disabling. Within the
loop, we handle external interrupts if the EE bit is set in irq_happened
as well as if the low-power state was interrupted by an external
interrupt. (We don't need to do the msgclr for a pending doorbell in
irq_happened, because doorbells are edge-triggered and don't remain
pending in hardware.) Then we clear both the EE and DBELL flags, and
once clear, they cannot be set again (until this CPU comes online again,
that is).
This also fixes the debug check to not be done when we just ran a KVM
guest or when the sleep didn't happen because of a pending event in
irq_happened.
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
This reverts commit 9678cdaae939 ("Use the POWER8 Micro Partition
Prefetch Engine in KVM HV on POWER8") because the original commit had
multiple, partly self-cancelling bugs, that could cause occasional
memory corruption.
In fact the logmpp instruction was incorrectly using register r0 as the
source of the buffer address and operation code, and depending on what
was in r0, it would either do nothing or corrupt the 64k page pointed to
by r0.
The logmpp instruction encoding and the operation code definitions could
be corrected, but then there is the problem that there is no clearly
defined way to know when the hardware has finished writing to the
buffer.
The original commit attempted to work around this by aborting the
write-out before starting the prefetch, but this is ineffective in the
case where the virtual core is now executing on a different physical
core from the one where the write-out was initiated.
These problems plus advice from the hardware designers not to use the
function (since the measured performance improvement from using the
feature was actually mostly negative), mean that reverting the code is
the best option.
Fixes: 9678cdaae939 ("Use the POWER8 Micro Partition Prefetch Engine in KVM HV on POWER8")
Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
... and save us the stub.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1445334889-300-6-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
We have the MAINTAINERS file for that. Also, Andreas doesn't
have the time for this work anymore.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andreas Herrmann <herrmann.der.user@googlemail.com>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1445334889-300-5-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Remove the remaining module functionality leftovers. Make
"dis_ucode_ldr" an early_param and make it static again. Drop
module aliases, autoloading table, description, etc.
Bump version number, while at it.
Signed-off-by: Borislav Petkov <bp@suse.de>
Cc: Andy Lutomirski <luto@amacapital.net>
Cc: Arjan van de Ven <arjan@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Dave Jones <davej@codemonkey.org.uk>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Len Brown <len.brown@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Tony Luck <tony.luck@intel.com>
Link: http://lkml.kernel.org/r/1445334889-300-4-git-send-email-bp@alien8.de
Signed-off-by: Ingo Molnar <mingo@kernel.org>
