This patch adds a BPF_PROG_TYPE_SK_REUSEPORT which can select
a SO_REUSEPORT sk from a BPF_MAP_TYPE_REUSEPORT_ARRAY. Like other
non SK_FILTER/CGROUP_SKB program, it requires CAP_SYS_ADMIN.
BPF_PROG_TYPE_SK_REUSEPORT introduces "struct sk_reuseport_kern"
to store the bpf context instead of using the skb->cb[48].
At the SO_REUSEPORT sk lookup time, it is in the middle of transiting
from a lower layer (ipv4/ipv6) to a upper layer (udp/tcp). At this
point, it is not always clear where the bpf context can be appended
in the skb->cb[48] to avoid saving-and-restoring cb[]. Even putting
aside the difference between ipv4-vs-ipv6 and udp-vs-tcp. It is not
clear if the lower layer is only ipv4 and ipv6 in the future and
will it not touch the cb[] again before transiting to the upper
layer.
For example, in udp_gro_receive(), it uses the 48 byte NAPI_GRO_CB
instead of IP[6]CB and it may still modify the cb[] after calling
the udp[46]_lib_lookup_skb(). Because of the above reason, if
sk->cb is used for the bpf ctx, saving-and-restoring is needed
and likely the whole 48 bytes cb[] has to be saved and restored.
Instead of saving, setting and restoring the cb[], this patch opts
to create a new "struct sk_reuseport_kern" and setting the needed
values in there.
The new BPF_PROG_TYPE_SK_REUSEPORT and "struct sk_reuseport_(kern|md)"
will serve all ipv4/ipv6 + udp/tcp combinations. There is no protocol
specific usage at this point and it is also inline with the current
sock_reuseport.c implementation (i.e. no protocol specific requirement).
In "struct sk_reuseport_md", this patch exposes data/data_end/len
with semantic similar to other existing usages. Together
with "bpf_skb_load_bytes()" and "bpf_skb_load_bytes_relative()",
the bpf prog can peek anywhere in the skb. The "bind_inany" tells
the bpf prog that the reuseport group is bind-ed to a local
INANY address which cannot be learned from skb.
The new "bind_inany" is added to "struct sock_reuseport" which will be
used when running the new "BPF_PROG_TYPE_SK_REUSEPORT" bpf prog in order
to avoid repeating the "bind INANY" test on
"sk_v6_rcv_saddr/sk->sk_rcv_saddr" every time a bpf prog is run. It can
only be properly initialized when a "sk->sk_reuseport" enabled sk is
adding to a hashtable (i.e. during "reuseport_alloc()" and
"reuseport_add_sock()").
The new "sk_select_reuseport()" is the main helper that the
bpf prog will use to select a SO_REUSEPORT sk. It is the only function
that can use the new BPF_MAP_TYPE_REUSEPORT_ARRAY. As mentioned in
the earlier patch, the validity of a selected sk is checked in
run time in "sk_select_reuseport()". Doing the check in
verification time is difficult and inflexible (consider the map-in-map
use case). The runtime check is to compare the selected sk's reuseport_id
with the reuseport_id that we want. This helper will return -EXXX if the
selected sk cannot serve the incoming request (e.g. reuseport_id
not match). The bpf prog can decide if it wants to do SK_DROP as its
discretion.
When the bpf prog returns SK_PASS, the kernel will check if a
valid sk has been selected (i.e. "reuse_kern->selected_sk != NULL").
If it does , it will use the selected sk. If not, the kernel
will select one from "reuse->socks[]" (as before this patch).
The SK_DROP and SK_PASS handling logic will be in the next patch.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch introduces a new map type BPF_MAP_TYPE_REUSEPORT_SOCKARRAY.
To unleash the full potential of a bpf prog, it is essential for the
userspace to be capable of directly setting up a bpf map which can then
be consumed by the bpf prog to make decision. In this case, decide which
SO_REUSEPORT sk to serve the incoming request.
By adding BPF_MAP_TYPE_REUSEPORT_SOCKARRAY, the userspace has total control
and visibility on where a SO_REUSEPORT sk should be located in a bpf map.
The later patch will introduce BPF_PROG_TYPE_SK_REUSEPORT such that
the bpf prog can directly select a sk from the bpf map. That will
raise the programmability of the bpf prog attached to a reuseport
group (a group of sk serving the same IP:PORT).
For example, in UDP, the bpf prog can peek into the payload (e.g.
through the "data" pointer introduced in the later patch) to learn
the application level's connection information and then decide which sk
to pick from a bpf map. The userspace can tightly couple the sk's location
in a bpf map with the application logic in generating the UDP payload's
connection information. This connection info contact/API stays within the
userspace.
Also, when used with map-in-map, the userspace can switch the
old-server-process's inner map to a new-server-process's inner map
in one call "bpf_map_update_elem(outer_map, &index, &new_reuseport_array)".
The bpf prog will then direct incoming requests to the new process instead
of the old process. The old process can finish draining the pending
requests (e.g. by "accept()") before closing the old-fds. [Note that
deleting a fd from a bpf map does not necessary mean the fd is closed]
During map_update_elem(),
Only SO_REUSEPORT sk (i.e. which has already been added
to a reuse->socks[]) can be used. That means a SO_REUSEPORT sk that is
"bind()" for UDP or "bind()+listen()" for TCP. These conditions are
ensured in "reuseport_array_update_check()".
A SO_REUSEPORT sk can only be added once to a map (i.e. the
same sk cannot be added twice even to the same map). SO_REUSEPORT
already allows another sk to be created for the same IP:PORT.
There is no need to re-create a similar usage in the BPF side.
When a SO_REUSEPORT is deleted from the "reuse->socks[]" (e.g. "close()"),
it will notify the bpf map to remove it from the map also. It is
done through "bpf_sk_reuseport_detach()" and it will only be called
if >=1 of the "reuse->sock[]" has ever been added to a bpf map.
The map_update()/map_delete() has to be in-sync with the
"reuse->socks[]". Hence, the same "reuseport_lock" used
by "reuse->socks[]" has to be used here also. Care has
been taken to ensure the lock is only acquired when the
adding sk passes some strict tests. and
freeing the map does not require the reuseport_lock.
The reuseport_array will also support lookup from the syscall
side. It will return a sock_gen_cookie(). The sock_gen_cookie()
is on-demand (i.e. a sk's cookie is not generated until the very
first map_lookup_elem()).
The lookup cookie is 64bits but it goes against the logical userspace
expectation on 32bits sizeof(fd) (and as other fd based bpf maps do also).
It may catch user in surprise if we enforce value_size=8 while
userspace still pass a 32bits fd during update. Supporting different
value_size between lookup and update seems unintuitive also.
We also need to consider what if other existing fd based maps want
to return 64bits value from syscall's lookup in the future.
Hence, reuseport_array supports both value_size 4 and 8, and
assuming user will usually use value_size=4. The syscall's lookup
will return ENOSPC on value_size=4. It will will only
return 64bits value from sock_gen_cookie() when user consciously
choose value_size=8 (as a signal that lookup is desired) which then
requires a 64bits value in both lookup and update.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
A later patch will introduce a BPF_MAP_TYPE_REUSEPORT_ARRAY which
allows a SO_REUSEPORT sk to be added to a bpf map. When a sk
is removed from reuse->socks[], it also needs to be removed from
the bpf map. Also, when adding a sk to a bpf map, the bpf
map needs to ensure it is indeed in a reuse->socks[].
Hence, reuseport_lock is needed by the bpf map to ensure its
map_update_elem() and map_delete_elem() operations are in-sync with
the reuse->socks[]. The BPF_MAP_TYPE_REUSEPORT_ARRAY map will only
acquire the reuseport_lock after ensuring the adding sk is already
in a reuseport group (i.e. reuse->socks[]). The map_lookup_elem()
will be lockless.
This patch also adds an ID to sock_reuseport. A later patch
will introduce BPF_PROG_TYPE_SK_REUSEPORT which allows
a bpf prog to select a sk from a bpf map. It is inflexible to
statically enforce a bpf map can only contain the sk belonging to
a particular reuse->socks[] (i.e. same IP:PORT) during the bpf
verification time. For example, think about the the map-in-map situation
where the inner map can be dynamically changed in runtime and the outer
map may have inner maps belonging to different reuseport groups.
Hence, when the bpf prog (in the new BPF_PROG_TYPE_SK_REUSEPORT
type) selects a sk, this selected sk has to be checked to ensure it
belongs to the requesting reuseport group (i.e. the group serving
that IP:PORT).
The "sk->sk_reuseport_cb" pointer cannot be used for this checking
purpose because the pointer value will change after reuseport_grow().
Instead of saving all checking conditions like the ones
preced calling "reuseport_add_sock()" and compare them everytime a
bpf_prog is run, a 32bits ID is introduced to survive the
reuseport_grow(). The ID is only acquired if any of the
reuse->socks[] is added to the newly introduced
"BPF_MAP_TYPE_REUSEPORT_ARRAY" map.
If "BPF_MAP_TYPE_REUSEPORT_ARRAY" is not used, the changes in this
patch is a no-op.
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Although the actual cookie check "__cookie_v[46]_check()" does
not involve sk specific info, it checks whether the sk has recent
synq overflow event in "tcp_synq_no_recent_overflow()". The
tcp_sk(sk)->rx_opt.ts_recent_stamp is updated every second
when it has sent out a syncookie (through "tcp_synq_overflow()").
The above per sk "recent synq overflow event timestamp" works well
for non SO_REUSEPORT use case. However, it may cause random
connection request reject/discard when SO_REUSEPORT is used with
syncookie because it fails the "tcp_synq_no_recent_overflow()"
test.
When SO_REUSEPORT is used, it usually has multiple listening
socks serving TCP connection requests destinated to the same local IP:PORT.
There are cases that the TCP-ACK-COOKIE may not be received
by the same sk that sent out the syncookie. For example,
if reuse->socks[] began with {sk0, sk1},
1) sk1 sent out syncookies and tcp_sk(sk1)->rx_opt.ts_recent_stamp
was updated.
2) the reuse->socks[] became {sk1, sk2} later. e.g. sk0 was first closed
and then sk2 was added. Here, sk2 does not have ts_recent_stamp set.
There are other ordering that will trigger the similar situation
below but the idea is the same.
3) When the TCP-ACK-COOKIE comes back, sk2 was selected.
"tcp_synq_no_recent_overflow(sk2)" returns true. In this case,
all syncookies sent by sk1 will be handled (and rejected)
by sk2 while sk1 is still alive.
The userspace may create and remove listening SO_REUSEPORT sockets
as it sees fit. E.g. Adding new thread (and SO_REUSEPORT sock) to handle
incoming requests, old process stopping and new process starting...etc.
With or without SO_ATTACH_REUSEPORT_[CB]BPF,
the sockets leaving and joining a reuseport group makes picking
the same sk to check the syncookie very difficult (if not impossible).
The later patches will allow bpf prog more flexibility in deciding
where a sk should be located in a bpf map and selecting a particular
SO_REUSEPORT sock as it sees fit. e.g. Without closing any sock,
replace the whole bpf reuseport_array in one map_update() by using
map-in-map. Getting the syncookie check working smoothly across
socks in the same "reuse->socks[]" is important.
A partial solution is to set the newly added sk's ts_recent_stamp
to the max ts_recent_stamp of a reuseport group but that will require
to iterate through reuse->socks[] OR
pessimistically set it to "now - TCP_SYNCOOKIE_VALID" when a sk is
joining a reuseport group. However, neither of them will solve the
existing sk getting moved around the reuse->socks[] and that
sk may not have ts_recent_stamp updated, unlikely under continuous
synflood but not impossible.
This patch opts to treat the reuseport group as a whole when
considering the last synq overflow timestamp since
they are serving the same IP:PORT from the userspace
(and BPF program) perspective.
"synq_overflow_ts" is added to "struct sock_reuseport".
The tcp_synq_overflow() and tcp_synq_no_recent_overflow()
will update/check reuse->synq_overflow_ts if the sk is
in a reuseport group. Similar to the reuseport decision in
__inet_lookup_listener(), both sk->sk_reuseport and
sk->sk_reuseport_cb are tested for SO_REUSEPORT usage.
Update on "synq_overflow_ts" happens at roughly once
every second.
A synflood test was done with a 16 rx-queues and 16 reuseport sockets.
No meaningful performance change is observed. Before and
after the change is ~9Mpps in IPv4.
Cc: Eric Dumazet <edumazet@google.com>
Signed-off-by: Martin KaFai Lau <kafai@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We need some mechanism to disable napi_direct on calling
xdp_return_frame_rx_napi() from some context.
When veth gets support of XDP_REDIRECT, it will redirects packets which
are redirected from other devices. On redirection veth will reuse
xdp_mem_info of the redirection source device to make return_frame work.
But in this case .ndo_xdp_xmit() called from veth redirection uses
xdp_mem_info which is not guarded by NAPI, because the .ndo_xdp_xmit()
is not called directly from the rxq which owns the xdp_mem_info.
This approach introduces a flag in bpf_redirect_info to indicate that
napi_direct should be disabled even when _rx_napi variant is used as
well as helper functions to use it.
A NAPI handler who wants to use this flag needs to call
xdp_set_return_frame_no_direct() before processing packets, and call
xdp_clear_return_frame_no_direct() after xdp_do_flush_map() before
exiting NAPI.
v4:
- Use bpf_redirect_info for storing the flag instead of xdp_mem_info to
avoid per-frame copy cost.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
We are going to add kern_flags field in redirect_info for kernel
internal use.
In order to avoid function call to access the flags, make redirect_info
accessible from modules. Also as it is now non-static, add prefix bpf_
to redirect_info.
v6:
- Fix sparse warning around EXPORT_SYMBOL.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
xdp_frame has kernel pointers which should not be readable from bpf
programs. When we want to reuse xdp_frame region but it may be read by
bpf programs later, we can use this helper to clear kernel pointers.
This is more efficient than calling memset() for the entire struct.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Acked-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This is needed for veth XDP which does skb_copy_expand()-like operation.
v2:
- Drop skb_copy_header part because it has already been exported now.
Signed-off-by: Toshiaki Makita <makita.toshiaki@lab.ntt.co.jp>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Add a new entry to HWIF table for XGMAC 2.10. For now we fill it with
empty callbacks which will be added in posterior patches.
Signed-off-by: Jose Abreu <joabreu@synopsys.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Joao Pinto <jpinto@synopsys.com>
Cc: Giuseppe Cavallaro <peppe.cavallaro@st.com>
Cc: Alexandre Torgue <alexandre.torgue@st.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a helper for MAC drivers to use in their validate callback to deal
with 2500BaseX vs 1000BaseX modes, where the hardware supports both
but it is not possible to automatically select between them.
This helper defaults to 1000BaseX, as that is the 802.3 standard, and
will allow users to select 2500BaseX either by forcing the speed if
AN is disabled, or by changing the advertising mask if AN is enabled.
Disabling AN is not recommended as it is only the speed that we're
interested in controlling, not the duplex or pause mode parameters.
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
mlx5_query_vport_admin_state() is not used anywhere. Remove it.
Signed-off-by: Eli Cohen <eli@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Modify and query vport state commands share the same admin_state and
op_mod values, rename the enums to fit them both.
In addition, remove the esw prefix from the admin state enum as this
also applied for vnic.
Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
New firmware has defined new HCA capability field called "max_num_eqs",
that is the number of available EQs after subtracting reserved FW EQs.
Before this capability the FW reported the EQ number in "log_max_eqs",
the reported value also contained FW reserved EQs, but the driver might
be failing to load on 320 cpus systems due to the fact that FW
reserved EQs were not available to the driver.
Now the driver has to obtain max_num_eqs value from new FW to get real
number of EQs available.
Signed-off-by: Denis Drozdov <denisd@mellanox.com>
Reviewed-by: Alex Vesker <valex@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
llc_sap_put() decreases the refcnt before deleting sap
from the global list. Therefore, there is a chance
llc_sap_find() could find a sap with zero refcnt
in this global list.
Close this race condition by checking if refcnt is zero
or not in llc_sap_find(), if it is zero then it is being
removed so we can just treat it as gone.
Reported-by: <syzbot+278893f3f7803871f7ce@syzkaller.appspotmail.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add support for the Broadcom Omega SoC internal Combo Ethernet
GPHY to the bcm7xxx phy driver.
Signed-off-by: Arun Parameswaran <arun.parameswaran@broadcom.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
syzbot reported that we reinitialize an active delayed
work in vsock_stream_connect():
ODEBUG: init active (active state 0) object type: timer_list hint:
delayed_work_timer_fn+0x0/0x90 kernel/workqueue.c:1414
WARNING: CPU: 1 PID: 11518 at lib/debugobjects.c:329
debug_print_object+0x16a/0x210 lib/debugobjects.c:326
The pattern is apparently wrong, we should only initialize
the dealyed work once and could repeatly schedule it. So we
have to move out the initializations to allocation side.
And to avoid confusion, we can split the shared dwork
into two, instead of re-using the same one.
Fixes: d021c34405 ("VSOCK: Introduce VM Sockets")
Reported-by: <syzbot+8a9b1bd330476a4f3db6@syzkaller.appspotmail.com>
Cc: Andy king <acking@vmware.com>
Cc: Stefan Hajnoczi <stefanha@redhat.com>
Cc: Jorgen Hansen <jhansen@vmware.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow matching on options in Geneve tunnel headers.
This makes use of existing tunnel metadata support.
The options can be described in the form
CLASS:TYPE:DATA/CLASS_MASK:TYPE_MASK:DATA_MASK, where CLASS is
represented as a 16bit hexadecimal value, TYPE as an 8bit
hexadecimal value and DATA as a variable length hexadecimal value.
e.g.
# ip link add name geneve0 type geneve dstport 0 external
# tc qdisc add dev geneve0 ingress
# tc filter add dev geneve0 protocol ip parent ffff: \
flower \
enc_src_ip 10.0.99.192 \
enc_dst_ip 10.0.99.193 \
enc_key_id 11 \
geneve_opts 0102:80:1122334421314151/ffff:ff:ffffffffffffffff \
ip_proto udp \
action mirred egress redirect dev eth1
This patch adds support for matching Geneve options in the order
supplied by the user. This leads to an efficient implementation in
the software datapath (and in our opinion hardware datapaths that
offload this feature). It is also compatible with Geneve options
matching provided by the Open vSwitch kernel datapath which is
relevant here as the Flower classifier may be used as a mechanism
to program flows into hardware as a form of Open vSwitch datapath
offload (sometimes referred to as OVS-TC). The netlink
Kernel/Userspace API may be extended, for example by adding a flag,
if other matching options are desired, for example matching given
options in any order. This would require an implementation in the
TC software datapath. And be done in a way that drivers that
facilitate offload of the Flower classifier can reject or accept
such flows based on hardware datapath capabilities.
This approach was discussed and agreed on at Netconf 2017 in Seoul.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Acked-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Allow the existing 'dissection' of tunnel metadata to 'dissect'
options already present in tunnel metadata. This dissection is
controlled by a new dissector key, FLOW_DISSECTOR_KEY_ENC_OPTS.
This dissection only occurs when skb_flow_dissect_tunnel_info()
is called, currently only the Flower classifier makes that call.
So there should be no impact on other users of the flow dissector.
This is in preparation for allowing the flower classifier to
match on Geneve options.
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: Pieter Jansen van Vuuren <pieter.jansenvanvuuren@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add the ability to specify through ethtool::rxnfc that a rule location is
special and will be used to participate in Wake-on-LAN, by e.g: having a
specific pattern be matched. When this is the case, fs->ring_cookie must
be set to the special value RX_CLS_FLOW_WAKE.
We also define an additional ethtool::wolinfo flag: WAKE_FILTER which
can be used to configure an Ethernet adapter to allow Wake-on-LAN using
previously programmed filters.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Daniel Borkmann says:
====================
pull-request: bpf-next 2018-08-07
The following pull-request contains BPF updates for your *net-next* tree.
The main changes are:
1) Add cgroup local storage for BPF programs, which provides a fast
accessible memory for storing various per-cgroup data like number
of transmitted packets, etc, from Roman.
2) Support bpf_get_socket_cookie() BPF helper in several more program
types that have a full socket available, from Andrey.
3) Significantly improve the performance of perf events which are
reported from BPF offload. Also convert a couple of BPF AF_XDP
samples overto use libbpf, both from Jakub.
4) seg6local LWT provides the End.DT6 action, which allows to
decapsulate an outer IPv6 header containing a Segment Routing Header.
Adds this action now to the seg6local BPF interface, from Mathieu.
5) Do not mark dst register as unbounded in MOV64 instruction when
both src and dst register are the same, from Arthur.
6) Define u_smp_rmb() and u_smp_wmb() to their respective barrier
instructions on arm64 for the AF_XDP sample code, from Brian.
7) Convert the tcp_client.py and tcp_server.py BPF selftest scripts
over from Python 2 to Python 3, from Jeremy.
8) Enable BTF build flags to the BPF sample code Makefile, from Taeung.
9) Remove an unnecessary rcu_read_lock() in run_lwt_bpf(), from Taehee.
10) Several improvements to the README.rst from the BPF documentation
to make it more consistent with RST format, from Tobin.
11) Replace all occurrences of strerror() by calls to strerror_r()
in libbpf and fix a FORTIFY_SOURCE build error along with it,
from Thomas.
12) Fix a bug in bpftool's get_btf() function to correctly propagate
an error via PTR_ERR(), from Yue.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Stefan Schmidt says:
====================
pull-request: ieee802154-next 2018-08-06
An update from ieee802154 for *net-next*
Romuald added a socket option to get the LQI value of the received datagram.
Alexander added a new hardware simulation driver modelled after hwsim of the
wireless people. It allows runtime configuration for new nodes and edges over a
netlink interface (a config utlity is making its way into wpan-tools).
We also have three fixes in here. One from Colin which is more of a cleanup and
two from Alex fixing tailroom and single frame space problems.
I would normally put the last two into my fixes tree, but given we are already
in -rc8 I simply put them here and added a cc: stable to them.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
We use to have message like:
struct vhost_msg {
int type;
union {
struct vhost_iotlb_msg iotlb;
__u8 padding[64];
};
};
Unfortunately, there will be a hole of 32bit in 64bit machine because
of the alignment. This leads a different formats between 32bit API and
64bit API. What's more it will break 32bit program running on 64bit
machine.
So fixing this by introducing a new message type with an explicit
32bit reserved field after type like:
struct vhost_msg_v2 {
__u32 type;
__u32 reserved;
union {
struct vhost_iotlb_msg iotlb;
__u8 padding[64];
};
};
We will have a consistent ABI after switching to use this. To enable
this capability, introduce a new ioctl (VHOST_SET_BAKCEND_FEATURE) for
userspace to enable this feature (VHOST_BACKEND_F_IOTLB_V2).
Fixes: 6b1e6cc785 ("vhost: new device IOTLB API")
Signed-off-by: Jason Wang <jasowang@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Johan Hedberg says:
====================
pull request: bluetooth-next 2018-08-05
Here's the main bluetooth-next pull request for the 4.19 kernel.
- Added support for Bluetooth Advertising Extensions
- Added vendor driver support to hci_h5 HCI driver
- Added serdev support to hci_h5 driver
- Added support for Qualcomm wcn3990 controller
- Added support for RTL8723BS and RTL8723DS controllers
- btusb: Added new ID for Realtek 8723DE
- Several other smaller fixes & cleanups
Please let me know if there are any issues pulling. Thanks.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Similar to TCP OOO RX queue, it makes sense to use rb trees to store
IP fragments, so that OOO fragments are inserted faster.
Tested:
- a follow-up patch contains a rather comprehensive ip defrag
self-test (functional)
- ran neper `udp_stream -c -H <host> -F 100 -l 300 -T 20`:
netstat --statistics
Ip:
282078937 total packets received
0 forwarded
0 incoming packets discarded
946760 incoming packets delivered
18743456 requests sent out
101 fragments dropped after timeout
282077129 reassemblies required
944952 packets reassembled ok
262734239 packet reassembles failed
(The numbers/stats above are somewhat better re:
reassemblies vs a kernel without this patchset. More
comprehensive performance testing TBD).
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Juha-Matti Tilli <juha-matti.tilli@iki.fi>
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tested: see the next patch is the series.
Suggested-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
This behavior is required in IPv6, and there is little need
to tolerate overlapping fragments in IPv4. This change
simplifies the code and eliminates potential DDoS attack vectors.
Tested: ran ip_defrag selftest (not yet available uptream).
Suggested-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Peter Oskolkov <posk@google.com>
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Florian Westphal <fw@strlen.de>
Acked-by: Stephen Hemminger <stephen@networkplumber.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch is to support automatic configuration for ptp timer.
If required ptp dts properties are not provided, driver could
try to calculate a set of default configurations to initialize
the ptp timer. This makes the driver work for many boards which
don't have the required ptp dts properties in current kernel.
Also the users could set dts properties by themselves according
to their requirement.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Pablo Neira Ayuso says:
====================
Netfilter updates for net-next
The following patchset contains Netfilter updates for your net-next tree:
1) Support for transparent proxying for nf_tables, from Mate Eckl.
2) Patchset to add OS passive fingerprint recognition for nf_tables,
from Fernando Fernandez. This takes common code from xt_osf and
place it into the new nfnetlink_osf module for codebase sharing.
3) Lightweight tunneling support for nf_tables.
4) meta and lookup are likely going to be used in rulesets, make them
direct calls. From Florian Westphal.
A bunch of incremental updates:
5) use PTR_ERR_OR_ZERO() from nft_numgen, from YueHaibing.
6) Use kvmalloc_array() to allocate hashtables, from Li RongQing.
7) Explicit dependencies between nfnetlink_cttimeout and conntrack
timeout extensions, from Harsha Sharma.
8) Simplify NLM_F_CREATE handling in nf_tables.
9) Removed unused variable in the get element command, from
YueHaibing.
10) Expose bridge hook priorities through uapi, from Mate Eckl.
And a few fixes for previous Netfilter batch for net-next:
11) Use per-netns mutex from flowtable event, from Florian Westphal.
12) Remove explicit dependency on iptables CT target from conntrack
zones, from Florian.
13) Fix use-after-free in rmmod nf_conntrack path, also from Florian.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Android's header sanitization tool chokes on static inline functions having a
trailing semicolon, leading to an incorrectly parsed header file. While the
tool should obviously be fixed, also fix the header files for the two affected
functions: ethtool_get_flow_spec_ring() and ethtool_get_flow_spec_ring_vf().
Fixes: 8cf6f497de ("ethtool: Add helper routines to pass vf to rx_flow_spec")
Reporetd-by: Blair Prescott <blair.prescott@broadcom.com>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
We prefer to ARRAY_SIZE rather than the open code to calculate size.
Signed-off-by: zhong jiang <zhongjiang@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Push iov_iter up from rxrpc_kernel_recv_data() to its caller to allow
non-contiguous iovs to be passed down, thereby permitting file reading to
be simplified in the AFS filesystem in a future patch.
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Netfilter exposes standard hook priorities in case of ipv4, ipv6 and
arp but not in case of bridge.
This patch exposes the hook priority values of the bridge family (which are
different from the formerly mentioned) via uapi so that they can be used by
user-space applications just like the others.
Signed-off-by: Máté Eckl <ecklm94@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch allows us to match on the tunnel metadata that is available
of the packet. We can use this to validate if the packet comes from/goes
to tunnel and the corresponding tunnel ID.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This patch implements the tunnel object type that can be used to
configure tunnels via metadata template through the existing lightweight
API from the ingress path.
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
This attribute's handling is broken. It can only be used when creating
Ethernet pseudo-wires, in which case its value can be used as the
initial MTU for the l2tpeth device.
However, when handling update requests, L2TP_ATTR_MTU only modifies
session->mtu. This value is never propagated to the l2tpeth device.
Dump requests also return the value of session->mtu, which is not
synchronised anymore with the device MTU.
The same problem occurs if the device MTU is properly updated using the
generic IFLA_MTU attribute. In this case, session->mtu is not updated,
and L2TP_ATTR_MTU will report an invalid value again when dumping the
session.
It does not seem worthwhile to complexify l2tp_eth.c to synchronise
session->mtu with the device MTU. Even the ip-l2tp manpage advises to
use 'ip link' to initialise the MTU of l2tpeth devices (iproute2 does
not handle L2TP_ATTR_MTU at all anyway). So let's just ignore it
entirely.
Signed-off-by: Guillaume Nault <g.nault@alphalink.fr>
Signed-off-by: David S. Miller <davem@davemloft.net>
The first client of the nf_osf.h userspace header is nft_osf, coming in
this batch, rename it to nfnetlink_osf.h as there are no userspace
clients for this yet, hence this looks consistent with other nfnetlink
subsystem.
Suggested-by: Jan Engelhardt <jengelh@inai.de>
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
All warnings (new ones prefixed by >>):
>> ./usr/include/linux/netfilter/nf_osf.h:73: userspace cannot reference function or variable defined in the kernel
Fixes: f932495208 ("netfilter: nfnetlink_osf: extract nfnetlink_subsystem code from xt_osf.c")
Reported-by: kbuild test robot <lkp@intel.com>
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
nf_ct_alloc_hashtable is used to allocate memory for conntrack,
NAT bysrc and expectation hashtable. Assuming 64k bucket size,
which means 7th order page allocation, __get_free_pages, called
by nf_ct_alloc_hashtable, will trigger the direct memory reclaim
and stall for a long time, when system has lots of memory stress
so replace combination of __get_free_pages and vzalloc with
kvmalloc_array, which provides a overflow check and a fallback
if no high order memory is available, and do not retry to reclaim
memory, reduce stall
and remove nf_ct_free_hashtable, since it is just a kvfree
Signed-off-by: Zhang Yu <zhangyu31@baidu.com>
Signed-off-by: Wang Li <wangli39@baidu.com>
Signed-off-by: Li RongQing <lirongqing@baidu.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
The bpf_get_local_storage() helper function is used
to get a pointer to the bpf local storage from a bpf program.
It takes a pointer to a storage map and flags as arguments.
Right now it accepts only cgroup storage maps, and flags
argument has to be 0. Further it can be extended to support
other types of local storage: e.g. thread local storage etc.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
BPF_MAP_TYPE_CGROUP_STORAGE maps are special in a way
that the access from the bpf program side is lookup-free.
That means the result is guaranteed to be a valid
pointer to the cgroup storage; no NULL-check is required.
This patch introduces BPF_PTR_TO_MAP_VALUE return type,
which is required to cause the verifier accept programs,
which are not checking the map value pointer for being NULL.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch converts bpf_prog_array from an array of prog pointers
to the array of struct bpf_prog_array_item elements.
This allows to save a cgroup storage pointer for each bpf program
efficiently attached to a cgroup.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
If a bpf program is using cgroup local storage, allocate
a bpf_cgroup_storage structure automatically on attaching the program
to a cgroup and save the pointer into the corresponding bpf_prog_list
entry.
Analogically, release the cgroup local storage on detaching
of the bpf program.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit introduces the bpf_cgroup_storage_set() helper,
which will be used to pass a pointer to a cgroup storage
to the bpf helper.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commit introduces BPF_MAP_TYPE_CGROUP_STORAGE maps:
a special type of maps which are implementing the cgroup storage.
>From the userspace point of view it's almost a generic
hash map with the (cgroup inode id, attachment type) pair
used as a key.
The only difference is that some operations are restricted:
1) a user can't create new entries,
2) a user can't remove existing entries.
The lookup from userspace is o(log(n)).
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This commits extends existing bpf maps memory charging API
to support dynamic charging/uncharging.
This is required to account memory used by maps,
if all entries are created dynamically after
the map initialization.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
The BTF conflicts were simple overlapping changes.
The virtio_net conflict was an overlap of a fix of statistics counter,
happening alongisde a move over to a bonafide statistics structure
rather than counting value on the stack.
Signed-off-by: David S. Miller <davem@davemloft.net>
