On some linux distributions, the default link of sh is dash which
deoesn't support split array like "${var//,/ }"
It's better to force to use bash shell directly.
Link: http://lkml.kernel.org/r/20171208093751.GA175471@sofia
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Reviewed-by: Sergey Senozhatsky <sergey.senozhatsky@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
If CONFIG_DEBUG_SLAB/CONFIG_DEBUG_SLAB_LEAK are enabled, the slab code
prints extra debug information when e.g. corruption is detected. This
includes pointers, which are not very useful when hashed.
Fix this by using %px to print unhashed pointers instead where it makes
sense, and by removing the printing of a last user pointer referring to
code.
[geert+renesas@glider.be: v2]
Link: http://lkml.kernel.org/r/1513179267-2509-1-git-send-email-geert+renesas@glider.be
Link: http://lkml.kernel.org/r/1512641861-5113-1-git-send-email-geert+renesas@glider.be
Fixes: ad67b74d24 ("printk: hash addresses printed with %p")
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Christoph Lameter <cl@linux.com>
Acked-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Pekka Enberg <penberg@kernel.org>
Cc: David Rientjes <rientjes@google.com>
Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Cc: "Tobin C . Harding" <me@tobin.cc>
Cc: Kees Cook <keescook@chromium.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Since commit 9cca35d42e ("mm, page_alloc: enable/disable IRQs once
when freeing a list of pages") we see excessive IRQ disabled times of up
to 25ms on an embedded ARM system (tracing overhead included).
This is due to graphics buffers being freed back to the system via
release_pages(). Graphics buffers can be huge, so it's not hard to hit
cases where the list of pages to free has 2048 entries. Disabling IRQs
while freeing all those pages is clearly not a good idea.
Introduce a batch limit, which allows IRQ servicing once every few
pages. The batch count is the same as used in other parts of the MM
subsystem when dealing with IRQ disabled regions.
Link: http://lkml.kernel.org/r/20171207170314.4419-1-l.stach@pengutronix.de
Fixes: 9cca35d42e ("mm, page_alloc: enable/disable IRQs once when freeing a list of pages")
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Acked-by: Mel Gorman <mgorman@techsingularity.net>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Vlastimil Babka <vbabka@suse.cz>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
With gcc 4.1.2:
mm/memory.o: In function `wp_huge_pmd':
memory.c:(.text+0x9b4): undefined reference to `do_huge_pmd_wp_page'
Interestingly, wp_huge_pmd() is emitted in the assembler output, but
never called.
Apparently replacing the call to pmd_write() in __handle_mm_fault() by a
call to the more complex pmd_access_permitted() reduced the ability of
the compiler to remove unused code.
Fix this by marking wp_huge_pmd() inline, like was done in commit
91a90140f9 ("mm/memory.c: mark create_huge_pmd() inline to prevent
build failure") for a similar problem.
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/1512335500-10889-1-git-send-email-geert@linux-m68k.org
Fixes: c7da82b894 ("mm: replace pmd_write with pmd_access_permitted in fault + gup paths")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
faddr2line hit var unbound error when CROSS_COMPILE isn't set since
nounset option is set in bash script.
Link: http://lkml.kernel.org/r/20171206013022.GA83929@sofia
Fixes: 95a8798254 ("scripts/faddr2line: extend usage on generic arch")
Signed-off-by: Liu Changcheng <changcheng.liu@intel.com>
Reported-by: Richard Weinberger <richard.weinberger@gmail.com>
Reviewed-by: Richard Weinberger <richard@nod.at>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Philippe Ombredanne <pombredanne@nexb.com>
Cc: NeilBrown <neilb@suse.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
gcc-8 warns about using strncpy() with the source size as the limit:
fs/exec.c:1223:32: error: argument to 'sizeof' in 'strncpy' call is the same expression as the source; did you mean to use the size of the destination? [-Werror=sizeof-pointer-memaccess]
This is indeed slightly suspicious, as it protects us from source
arguments without NUL-termination, but does not guarantee that the
destination is terminated.
This keeps the strncpy() to ensure we have properly padded target
buffer, but ensures that we use the correct length, by passing the
actual length of the destination buffer as well as adding a build-time
check to ensure it is exactly TASK_COMM_LEN.
There are only 23 callsites which I all reviewed to ensure this is
currently the case. We could get away with doing only the check or
passing the right length, but it doesn't hurt to do both.
Link: http://lkml.kernel.org/r/20171205151724.1764896-1-arnd@arndb.de
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Suggested-by: Kees Cook <keescook@chromium.org>
Acked-by: Kees Cook <keescook@chromium.org>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Serge Hallyn <serge@hallyn.com>
Cc: James Morris <james.l.morris@oracle.com>
Cc: Aleksa Sarai <asarai@suse.de>
Cc: "Eric W. Biederman" <ebiederm@xmission.com>
Cc: Frederic Weisbecker <frederic@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit ecc0c469f2 ("autofs: don't fail mount for transient error") was
meant to replace an 'if' with a 'switch', but instead added the 'switch'
leaving the case in place.
Link: http://lkml.kernel.org/r/87zi6wstmw.fsf@notabene.neil.brown.name
Fixes: ecc0c469f2 ("autofs: don't fail mount for transient error")
Reported-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: NeilBrown <neilb@suse.com>
Cc: Ian Kent <raven@themaw.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The hardened strlen() function causes rather large stack usage in at
least one file in the kernel, in particular when CONFIG_KASAN is
enabled:
drivers/media/usb/em28xx/em28xx-dvb.c: In function 'em28xx_dvb_init':
drivers/media/usb/em28xx/em28xx-dvb.c:2062:1: error: the frame size of 3256 bytes is larger than 204 bytes [-Werror=frame-larger-than=]
Analyzing this problem led to the discovery that gcc fails to merge the
stack slots for the i2c_board_info[] structures after we strlcpy() into
them, due to the 'noreturn' attribute on the source string length check.
I reported this as a gcc bug, but it is unlikely to get fixed for gcc-8,
since it is relatively easy to work around, and it gets triggered
rarely. An earlier workaround I did added an empty inline assembly
statement before the call to fortify_panic(), which works surprisingly
well, but is really ugly and unintuitive.
This is a new approach to the same problem, this time addressing it by
not calling the 'extern __real_strnlen()' function for string constants
where __builtin_strlen() is a compile-time constant and therefore known
to be safe.
We do this by checking if the last character in the string is a
compile-time constant '\0'. If it is, we can assume that strlen() of
the string is also constant.
As a side-effect, this should also improve the object code output for
any other call of strlen() on a string constant.
[akpm@linux-foundation.org: add comment]
Link: http://lkml.kernel.org/r/20171205215143.3085755-1-arnd@arndb.de
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82365
Link: https://patchwork.kernel.org/patch/9980413/
Link: https://patchwork.kernel.org/patch/9974047/
Fixes: 6974f0c455 ("include/linux/string.h: add the option of fortified string.h functions")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: Kees Cook <keescook@chromium.org>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>
Cc: Dmitry Vyukov <dvyukov@google.com>
Cc: Alexander Potapenko <glider@google.com>
Cc: Andrey Ryabinin <aryabinin@virtuozzo.com>
Cc: Daniel Micay <danielmicay@gmail.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Martin Wilck <mwilck@suse.com>
Cc: Dan Williams <dan.j.williams@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Commit bde5f6bc68 ("kmemleak: add scheduling point to
kmemleak_scan()") tries to rate-limit the frequency of cond_resched()
calls, but does it in a way which might incur an expensive division
operation in the inner loop. Simplify this.
Fixes: bde5f6bc68 ("kmemleak: add scheduling point to kmemleak_scan()")
Suggested-by: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Yisheng Xie <xieyisheng1@huawei.com>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Add a variant of rbtree_replace_node() that maintains the leftmost cache
of struct rbtree_root_cached when replacing nodes within the rbtree.
As drm_mm is the only rb_replace_node() being used on an interval tree,
the mistake looks fairly self-contained. Furthermore the only user of
drm_mm_replace_node() is its testsuite...
Testcase: igt/drm_mm/replace
Link: http://lkml.kernel.org/r/20171122100729.3742-1-chris@chris-wilson.co.uk
Link: https://patchwork.freedesktop.org/patch/msgid/20171109212435.9265-1-chris@chris-wilson.co.uk
Fixes: f808c13fd3 ("lib/interval_tree: fast overlap detection")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Davidlohr Bueso <dbueso@suse.de>
Cc: Jérôme Glisse <jglisse@redhat.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The <linux/bug.h> was removed from radix-tree.h by commit f5bba9d11a
("include/linux/radix-tree.h: remove unneeded #include <linux/bug.h>").
Since that commit, tools/testing/radix-tree/ couldn't pass compilation
due to tools/testing/radix-tree/idr.c:17: undefined reference to
WARN_ON_ONCE. This patch adds the bug.h header to idr.h to solve the
issue.
Link: http://lkml.kernel.org/r/1511963726-34070-2-git-send-email-wei.w.wang@intel.com
Fixes: f5bba9d11a ("include/linux/radix-tree.h: remove unneeded #include <linux/bug.h>")
Signed-off-by: Wei Wang <wei.w.wang@intel.com>
Cc: Matthew Wilcox <mawilcox@microsoft.com>
Cc: Jan Kara <jack@suse.cz>
Cc: Eric Biggers <ebiggers@google.com>
Cc: Tejun Heo <tj@kernel.org>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Cc: Michal Hocko <mhocko@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull drm fixes from Daniel Vetter:
- two fixes for new core features
- a corner case fix for the connnector_iter fix from last week (this
one is cc: stable)
- one vc4 fix
* tag 'drm-misc-fixes-2017-12-14' of git://anongit.freedesktop.org/drm/drm-misc:
drm/drm_lease: Prevent deadlock in case drm_lease_create() fails
drm: rework delayed connector cleanup in connector_iter
drm: Update edid-derived drm_display_info fields at edid property set [v2]
drm/vc4: Release fence after signalling
Recent rework of the virtio_mmio probe/remove paths balanced a
devm_ioremap() with an iounmap() rather than its devm variant. This ends
up corrupting the devm datastructures, and results in the following
boot-time splat on arm64 under QEMU 2.9.0:
[ 3.450397] ------------[ cut here ]------------
[ 3.453822] Trying to vfree() nonexistent vm area (00000000c05b4844)
[ 3.460534] WARNING: CPU: 1 PID: 1 at mm/vmalloc.c:1525 __vunmap+0x1b8/0x220
[ 3.475898] Kernel panic - not syncing: panic_on_warn set ...
[ 3.475898]
[ 3.493933] CPU: 1 PID: 1 Comm: swapper/0 Not tainted 4.15.0-rc3 #1
[ 3.513109] Hardware name: linux,dummy-virt (DT)
[ 3.525382] Call trace:
[ 3.531683] dump_backtrace+0x0/0x368
[ 3.543921] show_stack+0x20/0x30
[ 3.547767] dump_stack+0x108/0x164
[ 3.559584] panic+0x25c/0x51c
[ 3.569184] __warn+0x29c/0x31c
[ 3.576023] report_bug+0x1d4/0x290
[ 3.586069] bug_handler.part.2+0x40/0x100
[ 3.597820] bug_handler+0x4c/0x88
[ 3.608400] brk_handler+0x11c/0x218
[ 3.613430] do_debug_exception+0xe8/0x318
[ 3.627370] el1_dbg+0x18/0x78
[ 3.634037] __vunmap+0x1b8/0x220
[ 3.648747] vunmap+0x6c/0xc0
[ 3.653864] __iounmap+0x44/0x58
[ 3.659771] devm_ioremap_release+0x34/0x68
[ 3.672983] release_nodes+0x404/0x880
[ 3.683543] devres_release_all+0x6c/0xe8
[ 3.695692] driver_probe_device+0x250/0x828
[ 3.706187] __driver_attach+0x190/0x210
[ 3.717645] bus_for_each_dev+0x14c/0x1f0
[ 3.728633] driver_attach+0x48/0x78
[ 3.740249] bus_add_driver+0x26c/0x5b8
[ 3.752248] driver_register+0x16c/0x398
[ 3.757211] __platform_driver_register+0xd8/0x128
[ 3.770860] virtio_mmio_init+0x1c/0x24
[ 3.782671] do_one_initcall+0xe0/0x398
[ 3.791890] kernel_init_freeable+0x594/0x660
[ 3.798514] kernel_init+0x18/0x190
[ 3.810220] ret_from_fork+0x10/0x18
To fix this, we can simply rip out the explicit cleanup that the devm
infrastructure will do for us when our probe function returns an error
code, or when our remove function returns.
We only need to ensure that we call put_device() if a call to
register_virtio_device() fails in the probe path.
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Fixes: 7eb781b1bb ("virtio_mmio: add cleanup for virtio_mmio_probe")
Fixes: 25f32223bc ("virtio_mmio: add cleanup for virtio_mmio_remove")
Cc: Cornelia Huck <cohuck@redhat.com>
Cc: Michael S. Tsirkin <mst@redhat.com>
Cc: weiping zhang <zhangweiping@didichuxing.com>
Cc: virtualization@lists.linux-foundation.org
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
ath.git patches for 4.16. Major changes:
ath10k
* enable multiqueue support for all hw using mac80211 wake_tx_queue op
* new Kconfig option ATH10K_SPECTRAL to save RAM
* show tx stats on QCA9880
* new qcom,ath10k-calibration-variant DT entry
* WMI layer support for wcn3990
ath9k
* new Kconfig option ATH9K_COMMON_SPECTRAL to save RAM
wcn36xx
* hardware scan offload support
wil6210
* run-time PM support when interface is down
Add hw params entry for wcn3990 and populate various
target specific values for wcn3990.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Govind Singh <govinds@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
The parameter values for skid limit, number of peers and wds
entries values which are sent in wmi init cmd are hardware
specific.
Add support to obtain skid limit, number of peers and wds entries
values from hw params which will have the hw specific values
for these parameters.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Govind Singh <govinds@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
HL1.0 firmware branch, used in wcn3990, transmits management
frames by reference over WMI.
Add support for management tx by reference over WMI.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Govind Singh <govinds@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Due to the limitation of wmi tlv parsing logic, if there are
two parameters in a wmi event with same tlv tag, we can get only
the last value, as it overwrites the prev value of the same tlv tag.
The service ready event in wcn3990 contains two parameters of the
same tag UINT32, due to which the svc bitmap is overwritten with the
DBS support parameter.
Refactor the service ready event parsing to allow parsing two tlv
of the same tag UINT32 for wcn3990.
Signed-off-by: Rakesh Pillai <pillair@qti.qualcomm.com>
Signed-off-by: Govind Singh <govinds@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
The purpose of pushing indication on a list and handle these in a
separate worker is to allow the handlers to sleep. It does therefor not
make much sense to hold the queue spinlock through the entire indication
worker function.
By removing items from the queue early we don't need to hold the lock
throughout the indication worker, allowing the individual handlers to
sleep.
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Smatch generates a warning here:
drivers/net/wireless/ath/ath9k/htc_drv_main.c:1688 ath9k_htc_ampdu_action()
error: buffer overflow 'ista->tid_state' 8 <= 15
I don't know if it's a real bug or not but the other paths through this
function all ensure that "tid" is less than ATH9K_HTC_MAX_TID (8) so
checking here makes things more consistent.
Fixes: fb9987d0f7 ("ath9k_htc: Support for AR9271 chipset.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Current hw_scan implementation does not trigger offloaded
hardware scan and seems to only put the device in a kind of
listening mode (beacon/probe-response) for software scan.
Since no probe request are generated by the software, current
scanning method is similar to a passive scan.
This patch introduces support for 'true' hardware offloaded scan.
Hardware scan is configured and started via the start-scan-offload
firmware message. Once scan has been completed a scan indicator
message is received from firmware.
Moreover, this patch includes support for directed probe-request,
allowing connection with hidden APs. It also fixes scan issues with
band-steering AP which are not 'visible' with passive scan (due to
hidden ssid in beacons).
Let's keep the 'legacy' scanning method in case scan-offload is not
supported.
Signed-off-by: Loic Poulain <loic.poulain@linaro.org>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Board Data File (BDF) is loaded upon driver boot-up procedure. The right
board data file is identified on QCA4019 using bus, bmi-chip-id and
bmi-board-id.
The problem, however, can occur when the (default) board data file cannot
fulfill with the vendor requirements and it is necessary to use a different
board data file.
This problem was solved for SMBIOS by adding a special SMBIOS type 0xF8.
Something similar has to be provided for systems without SMBIOS but with
device trees. No solution was specified by QCA and therefore a new one has
to be found for ath10k.
The device tree requires addition strings to define the variant name
wifi@a000000 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};
wifi@a800000 {
status = "okay";
qcom,ath10k-calibration-variant = "RT-AC58U";
};
This would create the boarddata identifiers for the board-2.bin search
* bus=ahb,bmi-chip-id=0,bmi-board-id=16,variant=RT-AC58U
* bus=ahb,bmi-chip-id=0,bmi-board-id=17,variant=RT-AC58U
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
The bus + bmi-chip-id + bmi-board-id is not enough to identify the correct
board data file on QCA4019 based devices. Multiple different boards share
the same values. Only the original reference designs can currently be
identified and loaded from the board-2.bin. But these will not result in
the correct calibration data when combined with the pre-calibration data
from the device.
An additional "variant" information has to be provided (via SMBIOS or DT)
to select the correct board data for a design which was modified by an ODM.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
10.2.4 firmware branch (used in QCA988X) does not support
HTT_10_4_T2H_MSG_TYPE_PEER_STATS and that's why ath10k does not provide
tranmission rate statistics to user space, instead it just shows
hardcoded 6 Mbit/s. But pktlog firmware facility provides per peer tx
statistics. The firmware sends one pktlog event for every four
PPDUs per peer, which include:
* successful number of packets and bytes transmitted
* number of packets and bytes dropped
* retried number of packets and bytes
* rate info per ppdu
Firmware supports WMI_SERVICE_PEER_STATS, pktlog is enabled through
ATH10K_FLAG_PEER_STATS, which is nowadays enabled by default in ath10k.
This patch does not impact throughput.
Tested on QCA9880 with firmware version 10.2.4.70.48. This should also
work with firmware branch 10.2.4-1.0-00029
Parse peer stats from pktlog packets and update the tx rate information
per STA. This way user space can query about transmit rate with iw:
$iw wlan0 station dump
Station 3c:a9:f4:72:bb:a4 (on wlan1)
inactive time: 8210 ms
rx bytes: 9166
rx packets: 44
tx bytes: 1105
tx packets: 9
tx retries: 0
tx failed: 1
rx drop misc: 3
signal: -75 [-75, -87, -88] dBm
signal avg: -75 [-75, -85, -88] dBm
tx bitrate: 39.0 MBit/s MCS 10
rx bitrate: 26.0 MBit/s MCS 3
rx duration: 23250 us
authorized: yes
authenticated: yes
associated: yes
preamble: short
WMM/WME: yes
MFP: no
TDLS peer: no
DTIM period: 2
beacon interval:100
short preamble: yes
short slot time:yes
connected time: 22 seconds
Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Move pktlog_filter from struct ath10k_debug to struct ath10k
so that pktlog can be enabled even when debugfs is not
enabled, needed to enable peer tx stats for 10.2.4.
No changes in functionality.
Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Remove CONFIG_MAC80211_DEBUGFS dependency on ath10k_sta_statistics().
ath10k_sta_statistics() has per sta tx/rx stats and this should not
be dependent on MAC80211_DEBUGFS.
No changes in functionality.
Signed-off-by: Anilkumar Kolli <akolli@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
With current NAPI implementation, NAPI poll can deliver more frames
to net core than allotted budget. This may cause warning in napi_poll.
Remaining quota is not accounted, while processing amsdus in
rx_in_ord_ind and rx_ind queue. Adding num_msdus at last can not
prevent delivering more frames to net core. With this change,
all amdus from both in_ord_ind and rx_ind queues are processed and
enqueued into common skb list instead of delivering into mac80211.
Later msdus from common queue are dequeued and delivered depends on
quota availability. This change also simplifies the rx processing in
napi poll routine.
Signed-off-by: Rajkumar Manoharan <rmanohar@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Data packets are not sent by STA in case of STA joined to
non QOS AP (WMM disabled AP). This is happening because of STA
is sending data packets to firmware from host with qos enabled
along with non qos queue value(TID = 16).
Due to qos enabled, firmware is discarding the packet.
This patch fixes this issue by updating the qos based on station
WME capability field if WMM is disabled in AP.
This patch is required by 10.4 family chipsets like
QCA4019/QCA9888/QCA9884/QCA99X0.
Firmware Versoin : 10.4-3.5.1-00018.
For 10.2.4 family chipsets QCA988X/QCA9887 and QCA6174 this patch
has no effect.
Signed-off-by: Balaji Pothunoori <bpothuno@qti.qualcomm.com>
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com>
Currently, the SVE field in ID_AA64PFR0_EL1 is visible
unconditionally to userspace via the CPU ID register emulation,
irrespective of the kernel config. This means that if a kernel
configured with CONFIG_ARM64_SVE=n is run on SVE-capable hardware,
userspace will see SVE reported as present in the ID regs even
though the kernel forbids execution of SVE instructions.
This patch makes the exposure of the SVE field in ID_AA64PFR0_EL1
conditional on CONFIG_ARM64_SVE=y.
Since future architecture features are likely to encounter a
similar requirement, this patch adds a suitable helper macros for
use when declaring config-conditional ID register fields.
Fixes: 43994d824e ("arm64/sve: Detect SVE and activate runtime support")
Reviewed-by: Suzuki K Poulose <suzuki.poulose@arm.com>
Reported-by: Mark Rutland <mark.rutland@arm.com>
Signed-off-by: Dave Martin <Dave.Martin@arm.com>
Cc: Suzuki Poulose <suzuki.poulose@arm.com>
Signed-off-by: Will Deacon <will.deacon@arm.com>
The newly added wlcore_fw_sleep function is called conditionally,
which causes a warning without CONFIG_PM:
drivers/net/wireless/ti/wlcore/main.c:981:12: error: 'wlcore_fw_sleep' defined but not used [-Werror=unused-function]
Instead of trying to keep track of what should be in the #ifdef and what
should not, it's easier to mark the top-level suspend/resume functions
as __maybe_unused so the compiler can silently drop all the unused code.
Fixes: 37bf241b8e ("wlcore: allow elp during wowlan suspend")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
In rtl_rx_ampdu_apply(), when rtlpriv->cfg->ops->get_btc_status()
returns false, RT_TRACE() is called with the values of variables
reject_agg and agg_size, which have not been initialized.
Always initialize these variables in order to prevent using
uninitialized values.
This issue has been found with clang. The compiler reported:
drivers/net/wireless/realtek/rtlwifi/base.c:1665:6: error: variable
'agg_size' is used uninitialized whenever 'if' condition is false
[-Werror,-Wsometimes-uninitialized]
if (rtlpriv->cfg->ops->get_btc_status())
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtlwifi/base.c:1671:31: note:
uninitialized use occurs here
reject_agg, ctrl_agg_size, agg_size);
^~~~~~~~
drivers/net/wireless/realtek/rtlwifi/base.c:1665:6: error: variable
'reject_agg' is used uninitialized whenever 'if' condition
is false [-Werror,-Wsometimes-uninitialized]
if (rtlpriv->cfg->ops->get_btc_status())
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/realtek/rtlwifi/base.c:1671:4: note:
uninitialized use occurs here
reject_agg, ctrl_agg_size, agg_size);
^~~~~~~~~~
Fixes: 2635664e6e ("rtlwifi: Add rx ampdu cfg for btcoexist.")
Signed-off-by: Nicolas Iooss <nicolas.iooss_linux@m4x.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Reset the driver current tx read/write index to zero when inactiveps
nic out of sync with HW state. Wrong driver tx read/write index will
cause Tx fail.
Signed-off-by: Tsang-Shian Lin <thlin@realtek.com>
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Making this change to HIQ, which has high priority, improves the response
time for transmission after TBTT or beacon.
Signed-off-by: Ping-Ke Shih <pkshih@realtek.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Yan-Hsuan Chuang <yhchuang@realtek.com>
Cc: Birming Chiu <birming@realtek.com>
Cc: Shaofu <shaofu@realtek.com>
Cc: Steven Ting <steventing@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
The buffer size of return of cap iovar is greater than 256 bytes in some
firmwares. For instance, the return size of cap iovar is 271 bytes in 4373
13.10.246.79 firmare. It makes feature capability parsing failed because
caps buffer is default value.
So we enlarge caps buffer size to 512 bytes and add the error print for
cap iovar error.
Signed-off-by: Wright Feng <wright.feng@cypress.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
There is no need to repeatdly call brcmf_chip_get_core(), which
traverses a list of cores every time its called (including during
register access code!).
Call it once, and store a pointer to the core structure. The existing
code does nto keep track of users of the cores anyway, and even so, this
will allow for easier refcounting in future.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This macro is used exactly nowhere in the code. Delete it.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Create a macro to make the code a bit more readable, whilst we're stuck
with using struct element offsets as register offsets.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
[arend: rename macro to SD_REG]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
All functions that might require the window address changing call
brcmf_sdiod_set_backplane_window() prior to access. Thus resetting
the window is not required.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
[arend: corrected the driver prefix in the subject]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This function has become trivial enough that it may as well be pushed into
its callers, which has the side-benefit of clarifying what's going on.
Remove it, and rename brcmf_sdiod_set_sbaddr_window() to
brcmf_sdiod_set_backplane_window() as it's easier to understand.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Trivial tidy of register definitions.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Primarily this patch removes:
brcmf_sdiod_f0_writeb()
brcmf_sdiod_reg_write()
brcmf_sdiod_reg_read()
Since we no longer use the quirky method of deciding which function to
address via the address being accessed, take the opportunity to rename
some IO functions more in line with common kernel code. We also convert
those that map directly to sdio_{read,write}*() to macros.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Whilst this if () statement is technically correct, it lacks clarity.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
[arend: mention function in patch subject]
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
This function needs to be split up into separate read / write variants
for clarity.
Signed-off-by: Ian Molton <ian@mnementh.co.uk>
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Use the ARRAY_SIZE macro on rfseq_updategainu_events to determine
size of the array. Improvement suggested by coccinelle.
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Acked-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Roman Gushchin says:
====================
This patchset adds basic cgroup bpf operations to bpftool.
Right now there is no convenient way to perform these operations.
The /samples/bpf/load_sock_ops.c implements attach/detacg operations,
but only for BPF_CGROUP_SOCK_OPS programs. Bps (part of bcc) implements
bpf introspection, but lacks any cgroup-related specific.
I find having a tool to perform these basic operations in the kernel tree
very useful, as it can be used in the corresponding bpf documentation
without creating additional dependencies. And bpftool seems to be
a right tool to extend with such functionality.
v4:
- ATTACH_FLAGS and ATTACH_TYPE are listed and described in docs and usage
- ATTACH_FLAG names converted to "multi" and "override"
- do_attach() recognizes ATTACH_FLAG abbreviations, e.g "mul"
- Local variables sorted ("reverse Christmas tree")
- unknown attach flags value will be never truncated
v3:
- SRC replaced with OBJ in prog load docs
- Output unknown attach type in hex
- License header in SPDX format
- Minor style fixes (e.g. variable reordering)
v2:
- Added prog load operations
- All cgroup operations are looking like bpftool cgroup <command>
- All cgroup-related stuff is moved to a separate file
- Added support for attach flags
- Added support for attaching/detaching programs by id, pinned name, etc
- Changed cgroup detach arguments order
- Added empty json output for succesful programs
- Style fixed: includes order, strncmp and macroses, error handling
- Added man pages
v1:
https://lwn.net/Articles/740366/
====================
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
This patch adds basic cgroup bpf operations to bpftool:
cgroup list, attach and detach commands.
Usage is described in the corresponding man pages,
and examples are provided.
Syntax:
$ bpftool cgroup list CGROUP
$ bpftool cgroup attach CGROUP ATTACH_TYPE PROG [ATTACH_FLAGS]
$ bpftool cgroup detach CGROUP ATTACH_TYPE PROG
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: Jakub Kicinski <jakub.kicinski@netronome.com>
Cc: Martin KaFai Lau <kafai@fb.com>
Cc: Quentin Monnet <quentin.monnet@netronome.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
