[ Upstream commit dbc94a0fb81771a38733c0e8f2ea8c4fa6934dc1 ]
There are 2 ways to create IPoIB PKEY child interfaces:
1) Writing a PKEY to /sys/class/net/<ib parent interface>/create_child.
2) Using netlink with iproute.
While with sysfs the child interface has the same number of tx and
rx queues as the parent, with netlink there will always be 1 tx
and 1 rx queue for the child interface. That's because the
get_num_tx/rx_queues() netlink ops are missing and the default value
of 1 is taken for the number of queues (in rtnl_create_link()).
This change adds the get_num_tx/rx_queues() ops which allows for
interfaces with multiple queues to be created over netlink. This
constant only represents the max number of tx and rx queues on that
net device.
Fixes: 9baa0b036410 ("IB/ipoib: Add rtnl_link_ops support")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Link: https://lore.kernel.org/r/f4a42c8aa43c02d5ae5559a60c3e5e0f18c82531.1670485816.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99dc5a0712883d5d13b620d25b3759d429577bc8 ]
Add verification to make sure the roce page size cap is supported by the
system page size.
Fixes: ba6bb7e97421 ("RDMA/hns: Add interfaces to get pf capabilities from firmware")
Link: https://lore.kernel.org/r/20221126102911.2921820-5-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9fb39ef2ff3e18f1740625ba04093dfbef086d2b ]
Now, The address of the first two pages in the MR will be searched, which
use to speed up the lookup of the pbl table for hardware. An exception
will occur when there is only one page in this MR. This patch fix the
number of page to search.
Fixes: 9b2cf76c9f05 ("RDMA/hns: Optimize PBL buffer allocation process")
Link: https://lore.kernel.org/r/20221126102911.2921820-4-xuhaoyue1@hisilicon.com
Signed-off-by: Chengchang Tang <tangchengchang@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed461b30b22c8fa85c25189c14cb89f29595cd14 ]
In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto. Also investigate each case separately as Andy suggessted.
Fixes: e711f968c49c ("IB/srp: replace custom implementation of hex2bin()")
Fixes: 2a174df0c602 ("IB/srp: Use kstrtoull() instead of simple_strtoull()")
Fixes: 19f313438c77 ("IB/srp: Add RDMA/CM support")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-2-git-send-email-wangyufen@huawei.com
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 725349f8ba1e78a146c6ff8f3ee5e2712e517106 ]
In the previous iteration of the while loop, the "ret" may have been
assigned a value of 0, so the error return code -EINVAL may have been
incorrectly set to 0. To fix set valid return code before calling to
goto.
Fixes: 97167e813415 ("staging/rdma/hfi1: Tune for unknown channel if configuration file is absent")
Signed-off-by: Wang Yufen <wangyufen@huawei.com>
Link: https://lore.kernel.org/r/1669953638-11747-1-git-send-email-wangyufen@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fc8f93ad3e5485d45c992233c96acd902992dfc4 ]
Return "-EMSGSIZE" instead of "-EINVAL" when filling a QP entry, so that
new SKBs will be allocated if there's not enough room in current SKB.
Fixes: 65959522f806 ("RDMA: Add support to dump resource tracker in RAW format")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Patrisious Haddad <phaddad@nvidia.com>
Link: https://lore.kernel.org/r/b5e9c62f6b8369acab5648b661bf539cbceeffdc.1669636336.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea5ef136e215fdef35f14010bc51fcd6686e6922 ]
As the nla_nest_start() may fail with NULL returned, the return value needs
to be checked.
Fixes: c4ffee7c9bdb ("RDMA/netlink: Implement counter dumpit calback")
Signed-off-by: Yuan Can <yuancan@huawei.com>
Link: https://lore.kernel.org/r/20221126043410.85632-1-yuancan@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit f67376d801499f4fa0838c18c1efcad8840e550d ]
There is a null-ptr-deref when mount.cifs over rdma:
BUG: KASAN: null-ptr-deref in rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
Read of size 8 at addr 0000000000000018 by task mount.cifs/3046
CPU: 2 PID: 3046 Comm: mount.cifs Not tainted 6.1.0-rc5+ #62
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.14.0-1.fc3
Call Trace:
<TASK>
dump_stack_lvl+0x34/0x44
kasan_report+0xad/0x130
rxe_qp_do_cleanup+0x2f3/0x360 [rdma_rxe]
execute_in_process_context+0x25/0x90
__rxe_cleanup+0x101/0x1d0 [rdma_rxe]
rxe_create_qp+0x16a/0x180 [rdma_rxe]
create_qp.part.0+0x27d/0x340
ib_create_qp_kernel+0x73/0x160
rdma_create_qp+0x100/0x230
_smbd_get_connection+0x752/0x20f0
smbd_get_connection+0x21/0x40
cifs_get_tcp_session+0x8ef/0xda0
mount_get_conns+0x60/0x750
cifs_mount+0x103/0xd00
cifs_smb3_do_mount+0x1dd/0xcb0
smb3_get_tree+0x1d5/0x300
vfs_get_tree+0x41/0xf0
path_mount+0x9b3/0xdd0
__x64_sys_mount+0x190/0x1d0
do_syscall_64+0x35/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
The root cause of the issue is the socket create failed in
rxe_qp_init_req().
So move the reset rxe_qp_do_cleanup() after the NULL ptr check.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20221122151437.1057671-1-zhangxiaoxu5@huawei.com
Signed-off-by: Zhang Xiaoxu <zhangxiaoxu5@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b51d072da1d27e1193e84708201c48e385ad912 ]
pci_get_device() will increase the reference count for the returned
pci_dev, and also decrease the reference count for the input parameter
*from* if it is not NULL.
If we break out the loop in node_affinity_init() with 'dev' not NULL, we
need to call pci_dev_put() to decrease the reference count. Add missing
pci_dev_put() in error path.
Fixes: c513de490f80 ("IB/hfi1: Invalid NUMA node information can cause a divide by zero")
Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Link: https://lore.kernel.org/r/20221117131546.113280-1-wangxiongfeng2@huawei.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8eaa6f7d569b4a22bfc1b0a3fdfeeb401feb65a4 ]
In the HNS ROCE driver, The sge is divided into standard sge and extended
sge. There are 2 standard sge in RC/XRC, and the UD standard sge is 0.
In the scenario of RC SQ inline, if the data does not exceed 32bytes, the
standard sge will be used. If it exceeds, only the extended sge will be
used to fill the data.
Currently, when filling the extended sge, max_gs is directly used as the
number of the extended sge, which did not subtract the number of standard
sge. There is a logical error. The new algorithm subtracts the number of
standard sge from max_gs to get the actual number of extended sge.
Fixes: 30b707886aeb ("RDMA/hns: Support inline data in extented sge space for RC")
Link: https://lore.kernel.org/r/20221108133847.2304539-2-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3b1f864c904915b3baebffb31ea05ee704b0df3c ]
The sge size is known to be constant, so it's unnecessary to use sizeof to
calculate.
Link: https://lore.kernel.org/r/20220922123315.3732205-11-xuhaoyue1@hisilicon.com
Signed-off-by: Luoyouming <luoyouming@huawei.com>
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Stable-dep-of: 8eaa6f7d569b ("RDMA/hns: Fix ext_sge num error when post send")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 60da2d11fcbc043304910e4d2ca82f9bab953e63 ]
A malicious user may write undefined values into memory mapped completion
queue elements status or opcode. Undefined status or opcode values will
result in out-of-bounds access to an array mapping siw internal
representation of opcode and status to RDMA core representation when
reaping CQ elements. While siw detects those undefined values, it did not
correctly set completion status to a defined value, thus defeating the
whole purpose of the check.
This bug leads to the following Smatch static checker warning:
drivers/infiniband/sw/siw/siw_cq.c:96 siw_reap_cqe()
error: buffer overflow 'map_cqe_status' 10 <= 21
Fixes: bdf1da5df9da ("RDMA/siw: Fix immediate work request flush to completion queue")
Link: https://lore.kernel.org/r/20221115170747.1263298-1-bmt@zurich.ibm.com
Reported-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecacb3751f254572af0009b9501e2cdc83a30b6a ]
When filling a cm_id entry, return "-EAGAIN" instead of 0 if the cm_id
doesn'the have the same port as requested, otherwise an incomplete entry
may be returned, which causes "rdam res show cm_id" to return an error.
For example on a machine with two rdma devices with "rping -C 1 -v -s"
running background, the "rdma" command fails:
$ rdma -V
rdma utility, iproute2-5.19.0
$ rdma res show cm_id
link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 28056 comm rping src-addr 0.0.0.0:7174
error: Protocol not available
While with this fix it succeeds:
$ rdma res show cm_id
link mlx5_0/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
link mlx5_1/- cm-idn 0 state LISTEN ps TCP pid 26395 comm rping src-addr 0.0.0.0:7174
Fixes: 00313983cda6 ("RDMA/nldev: provide detailed CM_ID information")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Link: https://lore.kernel.org/r/a08e898cdac5e28428eb749a99d9d981571b8ea7.1667810736.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bdf1da5df9da680589a7f74448dd0a94dd3e1446 ]
Correctly set send queue element opcode during immediate work request
flushing in post sendqueue operation, if the QP is in ERROR state.
An undefined ocode value results in out-of-bounds access to an array
for mapping the opcode between siw internal and RDMA core representation
in work completion generation. It resulted in a KASAN BUG report
of type 'global-out-of-bounds' during NFSoRDMA testing.
This patch further fixes a potential case of a malicious user which may
write undefined values for completion queue elements status or opcode,
if the CQ is memory mapped to user land. It avoids the same out-of-bounds
access to arrays for status and opcode mapping as described above.
Fixes: 303ae1cdfdf7 ("rdma/siw: application interface")
Fixes: b0fff7317bb4 ("rdma/siw: completion queue methods")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Reviewed-by: Tom Talpey <tom@talpey.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20221107145057.895747-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a47e077e503feb73d56e491ce89aa73b67a3972 ]
Add a check for if create_singlethread_workqueue() fails and also destroy
the work queue on failure paths.
Fixes: e411e0587e0d ("RDMA/qedr: Add iWARP connection management functions")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Link: https://lore.kernel.org/r/Y1gBkDucQhhWj5YM@kili
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1afac08b39d85437187bb2a92d89a741b1078f55 ]
Commit 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()")
incorrectly tries to move a list from one list head to another. The
result is a kernel crash.
The crash is triggered when a link goes down and there are waiters for a
send to complete. The following signature is seen:
BUG: kernel NULL pointer dereference, address: 0000000000000030
[...]
Call Trace:
sc_disable+0x1ba/0x240 [hfi1]
pio_freeze+0x3d/0x60 [hfi1]
handle_freeze+0x27/0x1b0 [hfi1]
process_one_work+0x1b0/0x380
? process_one_work+0x380/0x380
worker_thread+0x30/0x360
? process_one_work+0x380/0x380
kthread+0xd7/0x100
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
The fix is to use the correct call to move the list.
Fixes: 13bac861952a ("IB/hfi1: Fix abba locking issue with sc_disable()")
Signed-off-by: Dean Luick <dean.luick@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Link: https://lore.kernel.org/r/166610327042.674422.6146908799669288976.stgit@awfm-02.cornelisnetworks.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eb83f502adb036cd56c27e13b9ca3b2aabfa790b ]
Commit 27cfde795a96 ("RDMA/cma: Fix arguments order in net device
validation") swapped the src and dst addresses in the call to
validate_net_dev().
As a consequence, the test in validate_ipv4_net_dev() to see if the
net_dev is the right one, is incorrect for port 1 <-> 2 communication when
the ports are on the same sub-net. This is fixed by denoting the
flowi4_oif as the device instead of the incoming one.
The bug has not been observed using IPv6 addresses.
Fixes: 27cfde795a96 ("RDMA/cma: Fix arguments order in net device validation")
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Link: https://lore.kernel.org/r/20221012141542.16925-1-haakon.bugge@oracle.com
Reviewed-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 241f9a27e0fc0eaf23e3d52c8450f10648cd11f1 ]
Set 'iova' and 'length' on ib_mr in ib_uverbs and ib_core layers to let all
drivers have the members filled. Also, this commit removes redundancy in
the respective drivers.
Previously, commit 04c0a5fcfcf65 ("IB/uverbs: Set IOVA on IB MR in uverbs
layer") changed to set 'iova', but seems to have missed 'length' and the
ib_core layer at that time.
Fixes: 04c0a5fcfcf65 ("IB/uverbs: Set IOVA on IB MR in uverbs layer")
Signed-off-by: Daisuke Matsuda <matsuda-daisuke@fujitsu.com>
Link: https://lore.kernel.org/r/20220921080844.1616883-1-matsuda-daisuke@fujitsu.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit b7d95040c13f61a4a6a859c5355faf583eff9658 ]
The responder should always use WC's SLID as the dlid, to follow the
IB SPEC section "13.5.4.2 COMMON RESPONSE ACTIONS":
A responder always takes the following actions in constructing a
response packet:
- The SLID of the received packet is used as the DLID in the response
packet.
Fixes: ac3a949fb2ff ("IB/CM: Set appropriate slid and dlid when handling CM request")
Signed-off-by: Mark Zhang <markzhang@nvidia.com>
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Link: https://lore.kernel.org/r/cd17c240231e059d2fc07c17dfe555d548b917eb.1662631201.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 754209850df8367c954ac1de7671c7430b1f342c ]
For header and trailer/padding processing, siw did not consume new
skb data until minimum amount present to fill current header or trailer
structure, including potential payload padding. Not consuming any
data during upcall may cause a receive stall, since tcp_read_sock()
is not upcalling again if no new data arrive.
A NFSoRDMA client got stuck at RDMA Write reception of unaligned
payload, if the current skb did contain only the expected 3 padding
bytes, but not the 4 bytes CRC trailer. Expecting 4 more bytes already
arrived in another skb, and not consuming those 3 bytes in the current
upcall left the Write incomplete, waiting for the CRC forever.
Fixes: 8b6a361b8c48 ("rdma/siw: receive path")
Reported-by: Olga Kornievskaia <kolga@netapp.com>
Tested-by: Olga Kornievskaia <kolga@netapp.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Link: https://lore.kernel.org/r/20220920081202.223629-1-bmt@zurich.ibm.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 548ce2e66725dcba4e27d1e8ac468d5dd17fd509 ]
When sock_create_kern in the function rxe_qp_init_req fails,
qp->sk is set to NULL.
Then the function rxe_create_qp will call rxe_qp_do_cleanup
to handle allocated resource.
Before handling qp->sk, this variable should be checked.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220822011615.805603-3-yanjun.zhu@linux.dev
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a625ca30eff806395175ebad3ac1399014bdb280 ]
When rxe_queue_init in the function rxe_qp_init_req fails,
both qp->req.task.func and qp->req.task.arg are not initialized.
Because of creation of qp fails, the function rxe_create_qp will
call rxe_qp_do_cleanup to handle allocated resource.
Before calling __rxe_do_task, both qp->req.task.func and
qp->req.task.arg should be checked.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220822011615.805603-2-yanjun.zhu@linux.dev
Reported-by: syzbot+ab99dc4c6e961eed8b8e@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Reviewed-by: Li Zhijian <lizhijian@fujitsu.com>
Reviewed-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 74b30b3ad5cec95d2647e796d10137438a098bc1 ]
When accessing Ports Performance Counters Register (PPCNT),
local port must be one if it is Function-Per-Port HCA that
HCA_CAP.num_ports is 1.
The offending patch can change the local port to other values
when accessing PPCNT after enabling switchdev mode. The following
syndrome will be printed:
# cat /sys/class/infiniband/rdmap4s0f0/ports/2/counters/*
# dmesg
mlx5_core 0000:04:00.0: mlx5_cmd_check:756:(pid 12450): ACCESS_REG(0x805) op_mod(0x1) failed, status bad parameter(0x3), syndrome (0x1e5585)
Fix it by setting local port to one for Function-Per-Port HCA.
Fixes: 210b1f78076f ("IB/mlx5: When not in dual port RoCE mode, use provided port as native")
Reviewed-by: Mark Bloch <mbloch@nvidia.com>
Signed-off-by: Chris Mi <cmi@nvidia.com>
Link: https://lore.kernel.org/r/6c5086c295c76211169e58dbd610fb0402360bab.1661763459.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 85eaeb5058f0f04dffb124c97c86b4f18db0b833 ]
Fix a nested dead lock as part of ODP flow by using mmput_async().
From the below call trace [1] can see that calling mmput() once we have
the umem_odp->umem_mutex locked as required by
ib_umem_odp_map_dma_and_lock() might trigger in the same task the
exit_mmap()->__mmu_notifier_release()->mlx5_ib_invalidate_range() which
may dead lock when trying to lock the same mutex.
Moving to use mmput_async() will solve the problem as the above
exit_mmap() flow will be called in other task and will be executed once
the lock will be available.
[1]
[64843.077665] task:kworker/u133:2 state:D stack: 0 pid:80906 ppid:
2 flags:0x00004000
[64843.077672] Workqueue: mlx5_ib_page_fault mlx5_ib_eqe_pf_action [mlx5_ib]
[64843.077719] Call Trace:
[64843.077722] <TASK>
[64843.077724] __schedule+0x23d/0x590
[64843.077729] schedule+0x4e/0xb0
[64843.077735] schedule_preempt_disabled+0xe/0x10
[64843.077740] __mutex_lock.constprop.0+0x263/0x490
[64843.077747] __mutex_lock_slowpath+0x13/0x20
[64843.077752] mutex_lock+0x34/0x40
[64843.077758] mlx5_ib_invalidate_range+0x48/0x270 [mlx5_ib]
[64843.077808] __mmu_notifier_release+0x1a4/0x200
[64843.077816] exit_mmap+0x1bc/0x200
[64843.077822] ? walk_page_range+0x9c/0x120
[64843.077828] ? __cond_resched+0x1a/0x50
[64843.077833] ? mutex_lock+0x13/0x40
[64843.077839] ? uprobe_clear_state+0xac/0x120
[64843.077860] mmput+0x5f/0x140
[64843.077867] ib_umem_odp_map_dma_and_lock+0x21b/0x580 [ib_core]
[64843.077931] pagefault_real_mr+0x9a/0x140 [mlx5_ib]
[64843.077962] pagefault_mr+0xb4/0x550 [mlx5_ib]
[64843.077992] pagefault_single_data_segment.constprop.0+0x2ac/0x560
[mlx5_ib]
[64843.078022] mlx5_ib_eqe_pf_action+0x528/0x780 [mlx5_ib]
[64843.078051] process_one_work+0x22b/0x3d0
[64843.078059] worker_thread+0x53/0x410
[64843.078065] ? process_one_work+0x3d0/0x3d0
[64843.078073] kthread+0x12a/0x150
[64843.078079] ? set_kthread_struct+0x50/0x50
[64843.078085] ret_from_fork+0x22/0x30
[64843.078093] </TASK>
Fixes: 36f30e486dce ("IB/core: Improve ODP to use hmm_range_fault()")
Reviewed-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Yishai Hadas <yishaih@nvidia.com>
Link: https://lore.kernel.org/r/74d93541ea533ef7daec6f126deb1072500aeb16.1661251841.git.leonro@nvidia.com
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0d1b756acf60da5004c1e20ca4462f0c257bf6e1 ]
Functions that work on a pointer to virtual memory such as
virt_to_pfn() and users of that function such as
virt_to_page() are supposed to pass a pointer to virtual
memory, ideally a (void *) or other pointer. However since
many architectures implement virt_to_pfn() as a macro,
this function becomes polymorphic and accepts both a
(unsigned long) and a (void *).
If we instead implement a proper virt_to_pfn(void *addr)
function the following happens (occurred on arch/arm):
drivers/infiniband/sw/siw/siw_qp_tx.c:32:23: warning: incompatible
integer to pointer conversion passing 'dma_addr_t' (aka 'unsigned int')
to parameter of type 'const void *' [-Wint-conversion]
drivers/infiniband/sw/siw/siw_qp_tx.c:32:37: warning: passing argument
1 of 'virt_to_pfn' makes pointer from integer without a cast
[-Wint-conversion]
drivers/infiniband/sw/siw/siw_qp_tx.c:538:36: warning: incompatible
integer to pointer conversion passing 'unsigned long long'
to parameter of type 'const void *' [-Wint-conversion]
Fix this with an explicit cast. In one case where the SIW
SGE uses an unaligned u64 we need a double cast modifying the
virtual address (va) to a platform-specific uintptr_t before
casting to a (void *).
Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Cc: linux-rdma@vger.kernel.org
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://lore.kernel.org/r/20220902215918.603761-1-linus.walleij@linaro.org
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0c8b5d6268d92d141bfd64d21c870d295a84dee1 ]
The value of qp->rq.wqe_shift of HIP08 is always determined by the number
of sge. So delete the wrong branch.
Fixes: cfc85f3e4b7f ("RDMA/hns: Add profile support for hip08 driver")
Fixes: 926a01dc000d ("RDMA/hns: Add QP operations support for hip08 SoC")
Link: https://lore.kernel.org/r/20220829105021.1427804-3-liangwenpeng@huawei.com
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 27cfde795a96aef1e859a5480489944b95421e46 ]
Fix the order of source and destination addresses when resolving the
route between server and client to validate use of correct net device.
The reverse order we had so far didn't actually validate the net device
as the server would try to resolve the route to itself, thus always
getting the server's net device.
The issue was discovered when running cm applications on a single host
between 2 interfaces with same subnet and source based routing rules.
When resolving the reverse route the source based route rules were
ignored.
Fixes: f887f2ac87c2 ("IB/cma: Validate routing of incoming requests")
Link: https://lore.kernel.org/r/1c1ec2277a131d277ebcceec987fd338d35b775f.1661251872.git.leonro@nvidia.com
Signed-off-by: Michael Guralnik <michaelgur@nvidia.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit eff6d998ca297cb0b2e53b032a56cf8e04dd8b17 ]
Limit the maximum number of calls to each tasklet from rxe_do_task()
before yielding the cpu. When the limit is reached reschedule the tasklet
and exit the calling loop. This patch prevents one tasklet from consuming
100% of a cpu core and causing a deadlock or soft lockup.
Link: https://lore.kernel.org/r/20220630190425.2251-9-rpearsonhpe@gmail.com
Signed-off-by: Bob Pearson <rpearsonhpe@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fd5382c5805c4bcb50fd25b7246247d3f7114733 ]
In the function rxe_create_qp(), rxe_qp_from_init() is called to
initialize qp, internally things like the spin locks are not setup until
rxe_qp_init_req().
If an error occures before this point then the unwind will call
rxe_cleanup() and eventually to rxe_qp_do_cleanup()/rxe_cleanup_task()
which will oops when trying to access the uninitialized spinlock.
Move the spinlock initializations earlier before any failures.
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220731063621.298405-1-yanjun.zhu@linux.dev
Reported-by: syzbot+833061116fa28df97f3b@syzkaller.appspotmail.com
Signed-off-by: Zhu Yanjun <yanjun.zhu@linux.dev>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c9776457bd5eaad4ce4ecb17af8d8f3cc6957c0b ]
Add missing check for return value when calling to
mlx5_ib_ft_type_to_namespace, even though it can't really fail in this
specific call.
Fixes: 52438be44112 ("RDMA/mlx5: Allow inserting a steering rule to the FDB")
Link: https://lore.kernel.org/r/7b9ceda217d9368a51dc47a46b769bad4af9ac92.1659256069.git.leonro@nvidia.com
Reviewed-by: Itay Aveksis <itayav@nvidia.com>
Signed-off-by: Maor Gottlieb <maorg@nvidia.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b5605148e6ce36bb21020d49010b617693933128 ]
Change the LIO port members inside struct srpt_port from regular members
into pointers. Allocate the LIO port data structures from inside
srpt_make_tport() and free these from inside srpt_make_tport(). Keep
struct srpt_device as long as either an RDMA port or a LIO target port is
associated with it. This patch decouples the lifetime of struct srpt_port
(controlled by the RDMA core) and struct srpt_port_id (controlled by LIO).
This patch fixes the following KASAN complaint:
BUG: KASAN: use-after-free in srpt_enable_tpg+0x31/0x70 [ib_srpt]
Read of size 8 at addr ffff888141cc34b8 by task check/5093
Call Trace:
<TASK>
show_stack+0x4e/0x53
dump_stack_lvl+0x51/0x66
print_address_description.constprop.0.cold+0xea/0x41e
print_report.cold+0x90/0x205
kasan_report+0xb9/0xf0
__asan_load8+0x69/0x90
srpt_enable_tpg+0x31/0x70 [ib_srpt]
target_fabric_tpg_base_enable_store+0xe2/0x140 [target_core_mod]
configfs_write_iter+0x18b/0x210
new_sync_write+0x1f2/0x2f0
vfs_write+0x3e3/0x540
ksys_write+0xbb/0x140
__x64_sys_write+0x42/0x50
do_syscall_64+0x34/0x80
entry_SYSCALL_64_after_hwframe+0x46/0xb0
</TASK>
Link: https://lore.kernel.org/r/20220727193415.1583860-4-bvanassche@acm.org
Reported-by: Li Zhijian <lizhijian@fujitsu.com>
Tested-by: Li Zhijian <lizhijian@fujitsu.com>
Fixes: a42d985bd5b2 ("ib_srpt: Initial SRP Target merge for v3.3-rc1")
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa7dfbb41b5a60ab90e244d6f586b8cb5c791c3e ]
This will be used to keep struct srpt_device around as long as either the
RDMA port exists or a LIO target port is associated with the struct
srpt_device.
Link: https://lore.kernel.org/r/20220727193415.1583860-3-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b03b1ae2a3125d4475452e4f19f5d3a6e910ff6e ]
Prepare for decoupling the lifetimes of struct srpt_port and struct
srpt_port_id by duplicating the port name into struct srpt_port.
Link: https://lore.kernel.org/r/20220727193415.1583860-2-bvanassche@acm.org
Signed-off-by: Bart Van Assche <bvanassche@acm.org>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa2a1df3a2c85f855af7d54466ac10bd48645d63 ]
setup_base_ctxt() allocates a memory chunk for uctxt->groups with
hfi1_alloc_ctxt_rcv_groups(). When init_user_ctxt() fails, uctxt->groups
is not released, which will lead to a memory leak.
We should release the uctxt->groups with hfi1_free_ctxt_rcv_groups()
when init_user_ctxt() fails.
Fixes: e87473bc1b6c ("IB/hfi1: Only set fd pointer when base context is completely initialized")
Link: https://lore.kernel.org/r/20220711070718.2318320-1-niejianglei2021@163.com
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3056fc6c32e613b760422b94c7617ac9a24a4721 ]
If siw_recv_mpa_rr returns -EAGAIN, it means that the MPA reply hasn't
been received completely, and should not report IW_CM_EVENT_CONNECT_REPLY
in this case. This may trigger a call trace in iw_cm. A simple way to
trigger this:
server: ib_send_lat
client: ib_send_lat -R <server_ip>
The call trace looks like this:
kernel BUG at drivers/infiniband/core/iwcm.c:894!
invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<...>
Workqueue: iw_cm_wq cm_work_handler [iw_cm]
Call Trace:
<TASK>
cm_work_handler+0x1dd/0x370 [iw_cm]
process_one_work+0x1e2/0x3b0
worker_thread+0x49/0x2e0
? rescuer_thread+0x370/0x370
kthread+0xe5/0x110
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
</TASK>
Fixes: 6c52fdc244b5 ("rdma/siw: connection management")
Link: https://lore.kernel.org/r/dae34b5fd5c2ea2bd9744812c1d2653a34a94c67.1657706960.git.chengyou@linux.alibaba.com
Signed-off-by: Cheng Xu <chengyou@linux.alibaba.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ecb4db5c3590aa956b4b2c352081a5b632d1f9f9 ]
The driver will clear all the interrupts in the same area
when the driver handles the interrupt of type AEQ overflow.
It should only set the interrupt status bit of type AEQ overflow.
Fixes: a5073d6054f7 ("RDMA/hns: Add eq support of hip08")
Link: https://lore.kernel.org/r/20220714134353.16700-4-liangwenpeng@huawei.com
Signed-off-by: Haoyue Xu <xuhaoyue1@hisilicon.com>
Signed-off-by: Wenpeng Liang <liangwenpeng@huawei.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b3236a64ddd125a455ef5b5316c1b9051b732974 ]
__qedr_alloc_mr() allocates a memory chunk for "mr->info.pbl_table" with
init_mr_info(). When rdma_alloc_tid() and rdma_register_tid() fail, "mr"
is released while "mr->info.pbl_table" is not released, which will lead
to a memory leak.
We should release the "mr->info.pbl_table" with qedr_free_pbl() when error
occurs to fix the memory leak.
Fixes: e0290cce6ac0 ("qedr: Add support for memory registeration verbs")
Link: https://lore.kernel.org/r/20220714061505.2342759-1-niejianglei2021@163.com
Signed-off-by: Jianglei Nie <niejianglei2021@163.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0050a57638ca4d681ff92bee55246bf64a6afe54 ]
Use -EINVAL return type to identify whether error is returned because of
"Out of MR resources" or any other error types.
Link: https://lore.kernel.org/r/20210729151732.30995-2-pkushwaha@marvell.com
Signed-off-by: Shai Malin <smalin@marvell.com>
Signed-off-by: Ariel Elior <aelior@marvell.com>
Signed-off-by: Prabhakar Kushwaha <pkushwaha@marvell.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ed6e53820ee4f68ed927de17e5675ff2a07a47e2 ]
stringify works with define, not enum.
Fixes: 91fddedd439c ("RDMA/rtrs: private headers with rtrs protocol structs and helpers")
Cc: jinpu.wang@ionos.com
Link: https://lore.kernel.org/r/20220712103113.617754-2-haris.iqbal@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Md Haris Iqbal <haris.iqbal@ionos.com>
Reviewed-by: Aleksei Marov <aleksei.marov@ionos.com>
Signed-off-by: Leon Romanovsky <leon@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0e8558476faf02ec51256cad9c487c93c346198c ]
drivers/infiniband/ulp/rtrs/rtrs-clt.c:1786:19: warning: result of comparison of
constant 'MAX_SESS_QUEUE_DEPTH' (65536) with expression of type 'u16'
(aka 'unsigned short') is always false [-Wtautological-constant-out-of-range-compare]
To fix it, limit MAX_SESS_QUEUE_DEPTH to u16 max, which is 65535, and
drop the check in rtrs-clt, as it's the type u16 max.
Link: https://lore.kernel.org/r/20210531122835.58329-1-jinpu.wang@ionos.com
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f3d0eabc14b6ea1fcbe85a60ee9d44e2b930b8a ]
Define MIN_CHUNK_SIZE to replace the hard-coding number.
We need 4k for metadata, so MIN_CHUNK_SIZE should be at least 8k.
Link: https://lore.kernel.org/r/20210528113018.52290-7-jinpu.wang@ionos.com
Signed-off-by: Gioh Kim <gi-oh.kim@ionos.com>
Signed-off-by: Jack Wang <jinpu.wang@ionos.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 2990f223ffa7bb25422956b9f79f9176a5b38346 upstream.
cm_alloc_id_priv() allocates resource for the cm_id_priv. When
cm_init_listen() fails it doesn't free it, leading to memory leak.
Add the missing error unwind.
Fixes: 98f67156a80f ("RDMA/cm: Simplify establishing a listen cm_id")
Link: https://lore.kernel.org/r/20220621052546.4821-1-linmq006@gmail.com
Signed-off-by: Miaoqian Lin <linmq006@gmail.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 118f767413ada4eef7825fbd4af7c0866f883441 upstream.
Make sure to save the passed QP timeout attribute when the QP gets modified,
so when calling query QP the right value is reported and not the
converted value that is required by the firmware. This issue was found
while running the pyverbs tests.
Fixes: cecbcddf6461 ("qedr: Add support for QP verbs")
Link: https://lore.kernel.org/r/20220525132029.84813-1-kamalheib1@gmail.com
Signed-off-by: Kamal Heib <kamalheib1@gmail.com>
Acked-by: Michal Kalderon <michal.kalderon@marvell.com>
Signed-off-by: Leon Romanovsky <leonro@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2f917af777011c88e977b9b9a5d00b280d3a59ce upstream.
Current rxe_requester() doesn't generate a completion when processing an
unsupported/invalid opcode. If rxe driver doesn't support a new opcode
(e.g. RDMA Atomic Write) and RDMA library supports it, an application
using the new opcode can reproduce this issue. Fix the issue by calling
"goto err;".
Fixes: 8700e3e7c485 ("Soft RoCE driver")
Link: https://lore.kernel.org/r/20220410113513.27537-1-yangx.jy@fujitsu.com
Signed-off-by: Xiao Yang <yangx.jy@fujitsu.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f93e91a0372c922c20d5bee260b0f43b4b8a1bee upstream.
When multiplying of different types, an overflow is possible even when
storing the result in a larger type. This is because the conversion is
done after the multiplication. So arithmetic overflow and thus in
incorrect value is possible.
Correct an instance of this in the inter packet delay calculation. Fix by
ensuring one of the operands is u64 which will promote the other to u64 as
well ensuring no overflow.
Cc: stable@vger.kernel.org
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20220520183712.48973.29855.stgit@awfm-01.cornelisnetworks.com
Reviewed-by: Mike Marciniszyn <mike.marciniszyn@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 05c03dfd09c069c4ffd783b47b2da5dcc9421f2c ]
If there is a failure during probe of hfi1 before the sdma_map_lock is
initialized, the call to hfi1_free_devdata() will attempt to use a lock
that has not been initialized. If the locking correctness validator is on
then an INFO message and stack trace resembling the following may be seen:
INFO: trying to register non-static key.
The code is fine but needs lockdep annotation, or maybe
you didn't initialize this object before use?
turning off the locking correctness validator.
Call Trace:
register_lock_class+0x11b/0x880
__lock_acquire+0xf3/0x7930
lock_acquire+0xff/0x2d0
_raw_spin_lock_irq+0x46/0x60
sdma_clean+0x42a/0x660 [hfi1]
hfi1_free_devdata+0x3a7/0x420 [hfi1]
init_one+0x867/0x11a0 [hfi1]
pci_device_probe+0x40e/0x8d0
The use of sdma_map_lock in sdma_clean() is for freeing the sdma_map
memory, and sdma_map is not allocated/initialized until after
sdma_map_lock has been initialized. This code only needs to be run if
sdma_map is not NULL, and so checking for that condition will avoid trying
to use the lock before it is initialized.
Fixes: 473291b3ea0e ("IB/hfi1: Fix for early release of sdma context")
Fixes: 7724105686e7 ("IB/hfi1: add driver files")
Link: https://lore.kernel.org/r/20220520183701.48973.72434.stgit@awfm-01.cornelisnetworks.com
Reported-by: Zheyu Ma <zheyuma97@gmail.com>
Signed-off-by: Douglas Miller <doug.miller@cornelisnetworks.com>
Signed-off-by: Dennis Dalessandro <dennis.dalessandro@cornelisnetworks.com>
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
