These are the latest device tree fixes for Arm SoCs:
- TI Keystone2 ethernet regressed after a driver change broke with
incorrect phy-mode in a board's DT source.
- A similar fix is needed for two i.MX boards that were missed in
an earlier bugfix.
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
- Two fixes for the Allwinner SoCs, one to relax the CMA allocation
ranges that were failing on older SoCs and one to fix Cedrus on the H6.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=qXc9
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master
Pull ARM SoC DT fixes from Arnd Bergmann:
"These are the latest device tree fixes for Arm SoCs:
- TI Keystone2 ethernet regressed after a driver change broke with
incorrect phy-mode in a board's DT source.
- A similar fix is needed for two i.MX boards that were missed in an
earlier bugfix.
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
- Two fixes for the Allwinner SoCs, one to relax the CMA allocation
ranges that were failing on older SoCs and one to fix Cedrus on the
H6"
* tag 'arm-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
ARM: dts: keystone-k2g-evm: fix rgmii phy-mode for ksz9031 phy
ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2
ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2
arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
ARM: dts sunxi: Relax a bit the CMA pool allocation range
The slow path for traced system call entries accessed a wrong memory
location to get the number of the maximum allowed system call number.
Renumber the numbered "local" label for the correct location to avoid
collisions with actual local labels.
Signed-off-by: Michael Karcher <kernel@mkarcher.dialup.fu-berlin.de>
Tested-by: John Paul Adrian Glaubitz <glaubitz@physik.fu-berlin.de>
Fixes: f3a8308864 ("sh: Add a few missing irqflags tracing markers.")
Signed-off-by: Rich Felker <dalias@libc.org>
Geert reported that his SH7722-based Migo-R board failed to boot after
commit:
c5b27a889d ("sh/tlb: Convert SH to generic mmu_gather")
That commit fell victim to copying the wrong pattern --
__pmd_free_tlb() used to be implemented with pmd_free().
Fixes: c5b27a889d ("sh/tlb: Convert SH to generic mmu_gather")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Tested-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Rich Felker <dalias@libc.org>
Pull parisc fixes from Helge Deller:
"Two fixes:
- Add the cmpxchg() function for pointers to u8 values. This fixes a
kernel linking error when building the tusb1210 driver (from Liam
Beguin).
- Add a define for atomic64_set_release() to fix CPU soft lockups
which happen because of missing unlocks while processing bit
operations (from John David Anglin)"
* 'parisc-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Add atomic64_set_release() define to avoid CPU soft lockups
parisc: add support for cmpxchg on u8 pointers
I have a few more fixes this week:
* A fix to avoid using SBI calls during kasan initialization, as the SBI calls
themselves have not been probed yet.
* Three fixes related to systems with multiple memory regions.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEKzw3R0RoQ7JKlDp6LhMZ81+7GIkFAl8cebwTHHBhbG1lckBk
YWJiZWx0LmNvbQAKCRAuExnzX7sYiV4UEACunm3LQGjjZUbHX/1/X2iAdNBcnbiZ
SFSXaKuAiDzSgT0//UMloo33eywo3afGCTOCysi3zrwNU+Hbj5l9byTMnvXy9hGv
QCFf2aEma9Ebk9ImdLDjkHQy2e1SiQRHQiKQcGTtP4LN470rrysh0a8qLLVAGucJ
j5fDPcy9smRw4x0lGHqLXDmVIm8nQNJAj6iKVQYzA2mSJC2+RoKcPcunnXvoOUwl
q/lcp41BavZyYsDIoAblRCA1/sfFL9BfocL4fUBFh4HUp/qcqwsGPv+U5QoEzkQ8
9LLLuXnHXgU5BTv4zVCUqXjMza6fgZj+qMpxXLQig0DRBetuQY2gpCdt2JAkcXTj
XvkHavxkA6206myl9xY6OJueC/25I6dp0eDENBpUNET8fqbeFBhIUCuNtAzT+98J
OcMImyFQgoesGU+6dkdHr6tSJHDcI3PzXlVUNH3hkIQq5Ny10g+jjAInZo6iXfpW
yBu+AzvippbD6C8/L+ntP94y9F/Me5rZKWMBhT2gTLm6JLrtC/Wl+ol2fZF8gmIU
wdT6TUykDY6u6bdqPSRKISzy0HfuREQNJU3qqoI496BMWQ1DaQjHB1482fdtdELI
KUFkM6u9iudWu5Dap45rSCjeZu01cLqnQqO5M3LYUrCy0D02j5SiGfUwRYo+eD0S
me68CtmbUPsH7Q==
=FG/F
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master
Pull RISC-V fixes from Palmer Dabbelt:
"A few more fixes this week:
- A fix to avoid using SBI calls during kasan initialization, as the
SBI calls themselves have not been probed yet.
- Three fixes related to systems with multiple memory regions"
* tag 'riscv-for-linus-5.8-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Parse all memory blocks to remove unusable memory
RISC-V: Do not rely on initrd_start/end computed during early dt parsing
RISC-V: Set maximum number of mapped pages correctly
riscv: kasan: use local_tlb_flush_all() to avoid uninitialized __sbi_rfence
- Fix a section end page alignment assumption that was causing crashes
- Fix ORC unwinding on freshly forked tasks which haven't executed yet
and which have empty user task stacks
- Fix the debug.exception-trace=1 sysctl dumping of user stacks, which
was broken by recent maccess changes
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----
iQJFBAABCgAvFiEEBpT5eoXrXCwVQwEKEnMQ0APhK1gFAl8cGlwRHG1pbmdvQGtl
cm5lbC5vcmcACgkQEnMQ0APhK1hVGxAAhW5LoNLv6BsMtKrFhBJRzPhoO8YcB8ep
Z/MaaiEcS8kcSVx1nQrNNhqzwIGBlexHTyoddYQr/LeM3ahOoXc4+jZI7Es6WKdc
Rhofalp0pryJrqj52orAVAUeHikmiqmadANKKmUNtXcjWWoxexgab28gLwJPPA55
SKw1/tqQ6JTf/M6tLnalib/VcigN7F/r797LgqLan9pSkjMGj6f1zMFmqTsNDi05
Si5gqRv2GlAraelRQU7emMZGu1bXhfJvGix7BB1/u6nRimY15vIFtccgt4akJmFN
tBUwNHFeLrYsoX1txjMTtGzASBqtjaD6A1K2geqmuZ1lRL1YuGnUl7n4ccgAvQdJ
eY6iiLiXDcjZLZXYe5tfdV/4p3HZ3MYm/IRkaw2KfiGAIv0Gii/U0mShO+lX1PAZ
BdelgJv2fcOxDiNe0RM4EniBXQUcqDIOpQ1fPryYsFLeeA1LCK2/b8WLOPHuK8YG
oxAgU9vV7OA7nfBdxIPszvX1jXOiQPglsW2gfxlKbGAA9j3uKDGhGnmFFYatYUMF
OEOf/5iuw3MZE/+gAG685ksk4ibgW4Kv6ahAEdzs5hh37uM8SiC3oWVWQf2YWGHG
ITswqKY2oUqghWa3ftXEtPLKstsYbRG7KCRfBXh6AN2ay7JrDJg6sItCL4UI5BjK
dkDJ4pKLXug=
=oamN
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Ingo Molnar:
"Misc fixes:
- Fix a section end page alignment assumption that was causing
crashes
- Fix ORC unwinding on freshly forked tasks which haven't executed
yet and which have empty user task stacks
- Fix the debug.exception-trace=1 sysctl dumping of user stacks,
which was broken by recent maccess changes"
* tag 'x86-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/dumpstack: Dump user space code correctly again
x86/stacktrace: Fix reliable check for empty user task stacks
x86/unwind/orc: Fix ORC for newly forked tasks
x86, vmlinux.lds: Page-align end of ..page_aligned sections
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline bugs
that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64
Signed-off-by: Ingo Molnar <mingo@kernel.org>
-----BEGIN PGP SIGNATURE-----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=n3nF
-----END PGP SIGNATURE-----
Merge tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull EFI fixes from Ingo Molnar:
"Various EFI fixes:
- Fix the layering violation in the use of the EFI runtime services
availability mask in users of the 'efivars' abstraction
- Revert build fix for GCC v4.8 which is no longer supported
- Clean up some x86 EFI stub details, some of which are borderline
bugs that copy around garbage into padding fields - let's fix these
out of caution.
- Fix build issues while working on RISC-V support
- Avoid --whole-archive when linking the stub on arm64"
* tag 'efi-urgent-2020-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi: Revert "efi/x86: Fix build with gcc 4"
efi/efivars: Expose RT service availability via efivars abstraction
efi/libstub: Move the function prototypes to header file
efi/libstub: Fix gcc error around __umoddi3 for 32 bit builds
efi/libstub/arm64: link stub lib.a conditionally
efi/x86: Only copy upto the end of setup_header
efi/x86: Remove unused variables
Pull networking fixes from David Miller:
1) Fix RCU locaking in iwlwifi, from Johannes Berg.
2) mt76 can access uninitialized NAPI struct, from Felix Fietkau.
3) Fix race in updating pause settings in bnxt_en, from Vasundhara
Volam.
4) Propagate error return properly during unbind failures in ax88172a,
from George Kennedy.
5) Fix memleak in adf7242_probe, from Liu Jian.
6) smc_drv_probe() can leak, from Wang Hai.
7) Don't muck with the carrier state if register_netdevice() fails in
the bonding driver, from Taehee Yoo.
8) Fix memleak in dpaa_eth_probe, from Liu Jian.
9) Need to check skb_put_padto() return value in hsr_fill_tag(), from
Murali Karicheri.
10) Don't lose ionic RSS hash settings across FW update, from Shannon
Nelson.
11) Fix clobbered SKB control block in act_ct, from Wen Xu.
12) Missing newlink in "tx_timeout" sysfs output, from Xiongfeng Wang.
13) IS_UDPLITE cleanup a long time ago, incorrectly handled
transformations involving UDPLITE_RECV_CC. From Miaohe Lin.
14) Unbalanced locking in netdevsim, from Taehee Yoo.
15) Suppress false-positive error messages in qed driver, from Alexander
Lobakin.
16) Out of bounds read in ax25_connect and ax25_sendmsg, from Peilin Ye.
17) Missing SKB release in cxgb4's uld_send(), from Navid Emamdoost.
18) Uninitialized value in geneve_changelink(), from Cong Wang.
19) Fix deadlock in xen-netfront, from Andera Righi.
19) flush_backlog() frees skbs with IRQs disabled, so should use
dev_kfree_skb_irq() instead of kfree_skb(). From Subash Abhinov
Kasiviswanathan.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (111 commits)
drivers/net/wan: lapb: Corrected the usage of skb_cow
dev: Defer free of skbs in flush_backlog
qrtr: orphan socket in qrtr_release()
xen-netfront: fix potential deadlock in xennet_remove()
flow_offload: Move rhashtable inclusion to the source file
geneve: fix an uninitialized value in geneve_changelink()
bonding: check return value of register_netdevice() in bond_newlink()
tcp: allow at most one TLP probe per flight
AX.25: Prevent integer overflows in connect and sendmsg
cxgb4: add missing release on skb in uld_send()
net: atlantic: fix PTP on AQC10X
AX.25: Prevent out-of-bounds read in ax25_sendmsg()
sctp: shrink stream outq when fails to do addstream reconf
sctp: shrink stream outq only when new outcnt < old outcnt
AX.25: Fix out-of-bounds read in ax25_connect()
enetc: Remove the mdio bus on PF probe bailout
net: ethernet: ti: add NETIF_F_HW_TC hw feature flag for taprio offload
net: ethernet: ave: Fix error returns in ave_init
drivers/net/wan/x25_asy: Fix to make it work
ipvs: fix the connection sync failed in some cases
...
Since commit bcf3440c6d ("net: phy: micrel: add phy-mode support for the
KSZ9031 PHY") the networking is broken on keystone-k2g-evm board.
The above board have phy-mode = "rgmii-id" and it is worked before because
KSZ9031 PHY started with default RGMII internal delays configuration (TX
off, RX on 1.2 ns) and MAC provided TX delay by default.
After above commit, the KSZ9031 PHY starts handling phy mode properly and
enables both RX and TX delays, as result networking is become broken.
Fix it by switching to phy-mode = "rgmii-rxid" to reflect previous
behavior.
Fixes: bcf3440c6d ("net: phy: micrel: add phy-mode support for the KSZ9031 PHY")
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Cc: Oleksij Rempel <o.rempel@pengutronix.de>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: Philippe Schenker <philippe.schenker@toradex.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Currently, maximum physical memory allowed is equal to -PAGE_OFFSET.
That's why we remove any memory blocks spanning beyond that size. However,
it is done only for memblock containing linux kernel which will not work
if there are multiple memblocks.
Process all memory blocks to figure out how much memory needs to be removed
and remove at the end instead of updating the memblock list in place.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Currently, maximum number of mapper pages are set to the pfn calculated
from the memblock size of the memblock containing kernel. This will work
until that memblock spans the entire memory. However, it will be set to
a wrong value if there are multiple memblocks defined in kernel
(e.g. with efi runtime services).
Set the the maximum value to the pfn calculated from dram size.
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Pull xtensa csum regression fix from Al Viro:
"Max Filippov caught a breakage introduced in xtensa this cycle
by the csum_and_copy_..._user() series.
Cut'n'paste from the wrong source - the check that belongs
in csum_and_copy_to_user() ended up both there and in
csum_and_copy_from_user()"
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
xtensa: fix access check in csum_and_copy_from_user
- Fix compat vDSO build flags for recent versions of clang
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl8avzQQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNKe4CADFdjUbKJSPMfn2EvYHJGYCS7Q6yUag6uZx
eecq/tfCulz4/vKrWkqiAgAUvFiSxAVhyHnqZhbp0wVo3J7PrNtK6xsPj+8yEBvh
o5z1F0ovhBshBpk4P2jBTDCaq/LsA5p8Uv3/OpgF192P61lplb+1XTmAa5kxN4an
d5UW5TMTYq0Apd5GYUAgWYEnLtwhncSj2DYuIIt3Dq3f3wpCB0mK4XfjnYPVrbgD
lY5X6795qeCffkoGf2WidZ7R9KQm/5E8hpK7ongQpbX1HjbWiobdDzFyzbT4WT7p
EvhOPpbboN5B/mAgeLTO6UKBIC52BgDMWI/dMRP7g4VIPL8OcBzk
=7lBG
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into master
Pull arm64 fix from Will Deacon:
"Fix compat vDSO build flags for recent versions of clang to tell it
where to find the assembler"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: vdso32: Fix '--prefix=' value for newer versions of clang
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
-----BEGIN PGP SIGNATURE-----
iF0EABECAB0WIQQYqXDMF3cvSLY+g9cLBhiOFHI71QUCXxqaPwAKCRALBhiOFHI7
1YANAKCEUNj0n91jslQNBACKuB7a79Ag3ACbB/hWOsGi+BVNlDy5mnXeoT5ZEd0=
=GJyb
-----END PGP SIGNATURE-----
Merge tag 'mvebu-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu into arm/fixes
mvebu fixes for 5.8 (part 1)
- DT change for Armada 38x allowing to add the register needed to fix
NETA lockup when repeatedly switching speed.
* tag 'mvebu-fixes-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/gclement/mvebu:
ARM: dts: armada-38x: fix NETA lockup when repeatedly switching speeds
To support the change in "phy: armada-38x: fix NETA lockup when
repeatedly switching speeds" we need to update the DT with the
additional register.
Fixes: 14dc100b44 ("phy: armada38x: add common phy support")
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
to reflect reality and avoid further confusion. This is a user space
visible change therefore the commit has also a stable tag for 5.7,
where this counter was introduced.
- Add Matthew Rosato as s390 IOMMU maintainer.
-----BEGIN PGP SIGNATURE-----
iQIzBAABCAAdFiEECMNfWEw3SLnmiLkZIg7DeRspbsIFAl8Z37QACgkQIg7DeRsp
bsJh9RAAwKu9/8WoFICzUqVwMnsJNkuMo4VAVHO5hA3CHVJ+0C4mPZt0dgHd9vuo
RSnegi9PZHMTwUP4lFDos7gpa8OLcJOelVbJ94weVN51+ISJpb83gwLoxSBJk29I
Wi0vyrS1copQmdkhU4urrBicF58iV7VafdhGhrqVFbPEVfIEndt4Qt/tKcgUOrkx
Tz1n0GJdMob+60u4+9NEwBGeEHVVHmYvQjTzD+b5T1kRo6PfN2CXpGbv8ab0gYjX
SHBElpMn16OIUALE4Xmz/QOa2nn2Ji0C39RUmZHaRK7uJgeIZcijYXDdhxvUY2Fu
AkX/96W9dgfDp9+OolVGV6rV/b1S7Cy0VKDu03t5vUuPWNP6fx3NxAg2q5p50GE8
OUTRgqO3+slFC0MAJ82fmGmDfJMjP6ulgy6nIOlL9UfUxAzz5JLC8L39G0qXDqI+
RL7AKpK+DjhWG+Kc565TyE7OiEFamzIve8Gl4mY4v76cEthGDi7eXVe7mUgOTCF1
/ZcIq/komgvhqhnURFFk71lrLwOLXRQKO88QjNERozlA1+psKMGMO0L1jMsV+Goc
+xUW+uoixfVWQoUplNJGUrYJl7x+MSe6s3SFBs+nhsjn+mF1RsWU+SXAiHxSe/QP
F0nS/ZVM02ixal2JS17/DFi8XE/BDIG+YabWryLjM5QDvwNU2vw=
=9JBZ
-----END PGP SIGNATURE-----
Merge tag 's390-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux into master
Pull s390 fixes from Heiko Carstens:
- Change cpum_cf/perf counter name from DFLT_CCERROR to DFLT_CCFINISH
to reflect reality and avoid further confusion. This is a user space
visible change therefore the commit has also a stable tag for 5.7,
where this counter was introduced.
- Add Matthew Rosato as s390 IOMMU maintainer.
* tag 's390-5.8-6' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
MAINTAINERS: add Matthew for s390 IOMMU
s390/cpum_cf,perf: change DFLT_CCERROR counter name
Newer versions of clang only look for $(COMPAT_GCC_TOOLCHAIN_DIR)as [1],
rather than $(COMPAT_GCC_TOOLCHAIN_DIR)$(CROSS_COMPILE_COMPAT)as,
resulting in the following build error:
$ make -skj"$(nproc)" ARCH=arm64 CROSS_COMPILE=aarch64-linux-gnu- \
CROSS_COMPILE_COMPAT=arm-linux-gnueabi- LLVM=1 O=out/aarch64 distclean \
defconfig arch/arm64/kernel/vdso32/
...
/home/nathan/cbl/toolchains/llvm-binutils/bin/as: unrecognized option '-EL'
clang-12: error: assembler command failed with exit code 1 (use -v to see invocation)
make[3]: *** [arch/arm64/kernel/vdso32/Makefile:181: arch/arm64/kernel/vdso32/note.o] Error 1
...
Adding the value of CROSS_COMPILE_COMPAT (adding notdir to account for a
full path for CROSS_COMPILE_COMPAT) fixes this issue, which matches the
solution done for the main Makefile [2].
[1]: 3452a0d8c1
[2]: https://lore.kernel.org/lkml/20200721173125.1273884-1-maskray@google.com/
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Cc: stable@vger.kernel.org
Link: https://github.com/ClangBuiltLinux/linux/issues/1099
Link: https://lore.kernel.org/r/20200723041509.400450-1-natechancellor@gmail.com
Signed-off-by: Will Deacon <will@kernel.org>
H.J. reported that post 5.7 a segfault of a user space task does not longer
dump the Code bytes when /proc/sys/debug/exception-trace is enabled. It
prints 'Code: Bad RIP value.' instead.
This was broken by a recent change which made probe_kernel_read() reject
non-kernel addresses.
Update show_opcodes() so it retrieves user space opcodes via
copy_from_user_nmi().
Fixes: 98a23609b1 ("maccess: always use strict semantics for probe_kernel_read")
Reported-by: H.J. Lu <hjl.tools@gmail.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/87h7tz306w.fsf@nanos.tec.linutronix.de
If a user task's stack is empty, or if it only has user regs, ORC
reports it as a reliable empty stack. But arch_stack_walk_reliable()
incorrectly treats it as unreliable.
That happens because the only success path for user tasks is inside the
loop, which only iterates on non-empty stacks. Generally, a user task
must end in a user regs frame, but an empty stack is an exception to
that rule.
Thanks to commit 71c9582528 ("x86/unwind/orc: Fix error handling in
__unwind_start()"), unwind_start() now sets state->error appropriately.
So now for both ORC and FP unwinders, unwind_done() and !unwind_error()
always means the end of the stack was successfully reached. So the
success path for kthreads is no longer needed -- it can also be used for
empty user tasks.
Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f136a4e5f019219cbc4f4da33b30c2f44fa65b84.1594994374.git.jpoimboe@redhat.com
The ORC unwinder fails to unwind newly forked tasks which haven't yet
run on the CPU. It correctly reads the 'ret_from_fork' instruction
pointer from the stack, but it incorrectly interprets that value as a
call stack address rather than a "signal" one, so the address gets
incorrectly decremented in the call to orc_find(), resulting in bad ORC
data.
Fix it by forcing 'ret_from_fork' frames to be signal frames.
Reported-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Wang ShaoBo <bobo.shaobowang@huawei.com>
Link: https://lkml.kernel.org/r/f91a8778dde8aae7f71884b5df2b16d552040441.1594994374.git.jpoimboe@redhat.com
- A couple of FEC2 phy-mode fixes on imx6sx-sabreauto and imx6sx-sdb
board.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
-----BEGIN PGP SIGNATURE-----
iQFIBAABCgAyFiEEFmJXigPl4LoGSz08UFdYWoewfM4FAl8VFn0UHHNoYXduZ3Vv
QGtlcm5lbC5vcmcACgkQUFdYWoewfM52gQf+OGrSQq1t77ltL5EKeeV8f+PCu7UP
X7I2IJY+9FIYA1wuu0/AuhHaJ9NR0hN2mZVT+ktmxIDMVuHZJpAuHRfGp7anfVKr
vo1JgT9CbVZ/kD0n5a6TN28Kb7DVkIM4QGcEJuCD2mb1UJarlVX8YHg9Otv7b26p
3arPLR8eocPh2jNNdYnwSoZ8Li7Dm1SQloRAoCJOHAgAuSAdhG15rJBG70zX0F7d
QEWu6tNjN8FSrWeT1GLlzywYxGp1t592yuUpKAoppuJgxyUPIYA15vRB0d/KRqUL
CWYrDNh/dAvafI9HfeQQK5BjQhW58gy2c38s+bR9iPGoy88GzZiy+AatYQ==
=NlnX
-----END PGP SIGNATURE-----
Merge tag 'imx-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into arm/fixes
i.MX fixes for 5.8, round 3:
- A couple of FEC2 phy-mode fixes on imx6sx-sabreauto and imx6sx-sdb
board.
- One fix on imx6qdl-icore pin muxing to get USB OTG_ID and SD card
detect work correctly.
* tag 'imx-fixes-5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
ARM: dts: imx6qdl-icore: Fix OTG_ID pin and sdcard detect
ARM: dts: imx6sx-sabreauto: Fix the phy-mode on fec2
ARM: dts: imx6sx-sdb: Fix the phy-mode on fec2
Link: https://lore.kernel.org/r/20200720040148.GA20462@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
were failing on older SoCs and one to fix Cedrus on the H6.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQRcEzekXsqa64kGDp7j7w1vZxhRxQUCXxWlyQAKCRDj7w1vZxhR
xcNtAQDO2rSFHGpQsUE/MCRxMqd2c2OQ9zpovRnirnyJqLCPEwD/b8GAi9tfJksM
lmghSQnByq6Sqm9UA/i6jjLfz//4iQg=
=JoYD
-----END PGP SIGNATURE-----
Merge tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes
Two fixes for the Allwinner SoCs, one to relax the CMA allocation ranges that
were failing on older SoCs and one to fix Cedrus on the H6.
* tag 'sunxi-fixes-for-5.8-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
arm64: dts: allwinner: h6: Fix Cedrus IOMMU usage
ARM: dts sunxi: Relax a bit the CMA pool allocation range
Link: https://lore.kernel.org/r/e24f0608-6a4f-4163-b99e-a5f48e796184.lettre@localhost
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=/5rQ
-----END PGP SIGNATURE-----
Merge tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media into master
Pull media fixes from Mauro Carvalho Chehab:
"A series of fixes for the upcoming atomisp driver. They solve issues
when probing atomisp on devices with multiple cameras and get rid of
warnings when built with W=1.
The diffstat is a bit long, as this driver has several abstractions.
The patches that solved the issues with W=1 had to get rid of some
duplicated code (there used to have 2 versions of the same code, one
for ISP2401 and another one for ISP2400).
As this driver is not in 5.7, such changes won't cause regressions"
* tag 'media/v5.8-3' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (38 commits)
Revert "media: atomisp: keep the ISP powered on when setting it"
media: atomisp: fix mask and shift operation on ISPSSPM0
media: atomisp: move system_local consts into a C file
media: atomisp: get rid of version-specific system_local.h
media: atomisp: move global stuff into a common header
media: atomisp: remove non-used 32-bits consts at system_local
media: atomisp: get rid of some unused static vars
media: atomisp: Fix error code in ov5693_probe()
media: atomisp: Replace trace_printk by pr_info
media: atomisp: Fix __func__ style warnings
media: atomisp: fix help message for ISP2401 selection
media: atomisp: i2c: atomisp-ov2680.c: fixed a brace coding style issue.
media: atomisp: make const arrays static, makes object smaller
media: atomisp: Clean up non-existing folders from Makefile
media: atomisp: Get rid of ACPI specifics in gmin_subdev_add()
media: atomisp: Provide Gmin subdev as parameter to gmin_subdev_add()
media: atomisp: Use temporary variable for device in gmin_subdev_add()
media: atomisp: Refactor PMIC detection to a separate function
media: atomisp: Deduplicate return ret in gmin_i2c_write()
media: atomisp: Make pointer to PMIC client global
...
On x86-32 the idt_table with 256 entries needs only 2048 bytes. It is
page-aligned, but the end of the .bss..page_aligned section is not
guaranteed to be page-aligned.
As a result, objects from other .bss sections may end up on the same 4k
page as the idt_table, and will accidentially get mapped read-only during
boot, causing unexpected page-faults when the kernel writes to them.
This could be worked around by making the objects in the page aligned
sections page sized, but that's wrong.
Explicit sections which store only page aligned objects have an implicit
guarantee that the object is alone in the page in which it is placed. That
works for all objects except the last one. That's inconsistent.
Enforcing page sized objects for these sections would wreckage memory
sanitizers, because the object becomes artificially larger than it should
be and out of bound access becomes legit.
Align the end of the .bss..page_aligned and .data..page_aligned section on
page-size so all objects places in these sections are guaranteed to have
their own page.
[ tglx: Amended changelog ]
Signed-off-by: Joerg Roedel <jroedel@suse.de>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Kees Cook <keescook@chromium.org>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/20200721093448.10417-1-joro@8bytes.org
Stalls are quite frequent with recent kernels. I enabled
CONFIG_SOFTLOCKUP_DETECTOR and I caught the following stall:
watchdog: BUG: soft lockup - CPU#0 stuck for 22s! [cc1:22803]
CPU: 0 PID: 22803 Comm: cc1 Not tainted 5.6.17+ #3
Hardware name: 9000/800/rp3440
IAOQ[0]: d_alloc_parallel+0x384/0x688
IAOQ[1]: d_alloc_parallel+0x388/0x688
RP(r2): d_alloc_parallel+0x134/0x688
Backtrace:
[<000000004036974c>] __lookup_slow+0xa4/0x200
[<0000000040369fc8>] walk_component+0x288/0x458
[<000000004036a9a0>] path_lookupat+0x88/0x198
[<000000004036e748>] filename_lookup+0xa0/0x168
[<000000004036e95c>] user_path_at_empty+0x64/0x80
[<000000004035d93c>] vfs_statx+0x104/0x158
[<000000004035dfcc>] __do_sys_lstat64+0x44/0x80
[<000000004035e5a0>] sys_lstat64+0x20/0x38
[<0000000040180054>] syscall_exit+0x0/0x14
The code was stuck in this loop in d_alloc_parallel:
4037d414: 0e 00 10 dc ldd 0(r16),ret0
4037d418: c7 fc 5f ed bb,< ret0,1f,4037d414 <d_alloc_parallel+0x384>
4037d41c: 08 00 02 40 nop
This is the inner loop of bit_spin_lock which is called by hlist_bl_unlock in
d_alloc_parallel:
static inline void bit_spin_lock(int bitnum, unsigned long *addr)
{
/*
* Assuming the lock is uncontended, this never enters
* the body of the outer loop. If it is contended, then
* within the inner loop a non-atomic test is used to
* busywait with less bus contention for a good time to
* attempt to acquire the lock bit.
*/
preempt_disable();
#if defined(CONFIG_SMP) || defined(CONFIG_DEBUG_SPINLOCK)
while (unlikely(test_and_set_bit_lock(bitnum, addr))) {
preempt_enable();
do {
cpu_relax();
} while (test_bit(bitnum, addr));
preempt_disable();
}
#endif
__acquire(bitlock);
}
After consideration, I realized that we must be losing bit unlocks.
Then, I noticed that we missed defining atomic64_set_release().
Adding this define fixes the stalls in bit operations.
Signed-off-by: Dave Anglin <dave.anglin@bell.net>
Cc: stable@vger.kernel.org
Signed-off-by: Helge Deller <deller@gmx.de>
Change the counter name DLFT_CCERROR to DLFT_CCFINISH on IBM z15.
This counter counts completed DEFLATE instructions with exit code
0, 1 or 2. Since exit code 0 means success and exit code 1 or 2
indicate errors, change the counter name to avoid confusion.
This counter is incremented each time the DEFLATE instruction
completed regardless if an error was detected or not.
Fixes: d68d5d51dc ("s390/cpum_cf: Add new extended counters for IBM z15")
Fixes: e7950166e4 ("perf vendor events s390: Add new deflate counters for IBM z15")
Cc: stable@vger.kernel.org # v5.7
Signed-off-by: Thomas Richter <tmricht@linux.ibm.com>
Reviewed-by: Sumanth Korikkar <sumanthk@linux.ibm.com>
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
The kernel test bot reported[1] that using set_mask_bits on a u8 causes
the following issue on parisc:
hppa-linux-ld: drivers/phy/ti/phy-tusb1210.o: in function `tusb1210_probe':
>> (.text+0x2f4): undefined reference to `__cmpxchg_called_with_bad_pointer'
>> hppa-linux-ld: (.text+0x324): undefined reference to `__cmpxchg_called_with_bad_pointer'
hppa-linux-ld: (.text+0x354): undefined reference to `__cmpxchg_called_with_bad_pointer'
Add support for cmpxchg on u8 pointers.
[1] https://lore.kernel.org/patchwork/patch/1272617/#1468946
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Liam Beguin <liambeguin@gmail.com>
Tested-by: Dave Anglin <dave.anglin@bell.net>
Signed-off-by: Helge Deller <deller@gmx.de>
It fails to boot the v5.8-rc4 kernel with CONFIG_KASAN because kasan_init
and kasan_early_init use uninitialized __sbi_rfence as executing the
tlb_flush_all(). Actually, at this moment, only the CPU which is
responsible for the system initialization enables the MMU. Other CPUs are
parking at the .Lsecondary_start. Hence the tlb_flush_all() is able to be
replaced by local_tlb_flush_all() to avoid using uninitialized
__sbi_rfence.
Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
The current pin muxing scheme muxes GPIO_1 pad for USB_OTG_ID
because of which when card is inserted, usb otg is enumerated
and the card is never detected.
[ 64.492645] cfg80211: failed to load regulatory.db
[ 64.492657] imx-sdma 20ec000.sdma: external firmware not found, using ROM firmware
[ 76.343711] ci_hdrc ci_hdrc.0: EHCI Host Controller
[ 76.349742] ci_hdrc ci_hdrc.0: new USB bus registered, assigned bus number 2
[ 76.388862] ci_hdrc ci_hdrc.0: USB 2.0 started, EHCI 1.00
[ 76.396650] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.08
[ 76.405412] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 76.412763] usb usb2: Product: EHCI Host Controller
[ 76.417666] usb usb2: Manufacturer: Linux 5.8.0-rc1-next-20200618 ehci_hcd
[ 76.424623] usb usb2: SerialNumber: ci_hdrc.0
[ 76.431755] hub 2-0:1.0: USB hub found
[ 76.435862] hub 2-0:1.0: 1 port detected
The TRM mentions GPIO_1 pad should be muxed/assigned for card detect
and ENET_RX_ER pad for USB_OTG_ID for proper operation.
This patch fixes pin muxing as per TRM and is tested on a
i.Core 1.5 MX6 DL SOM.
[ 22.449165] mmc0: host does not support reading read-only switch, assuming write-enable
[ 22.459992] mmc0: new high speed SDHC card at address 0001
[ 22.469725] mmcblk0: mmc0:0001 EB1QT 29.8 GiB
[ 22.478856] mmcblk0: p1 p2
Fixes: 6df11287f7 ("ARM: dts: imx6q: Add Engicam i.CoreM6 Quad/Dual initial support")
Cc: stable@vger.kernel.org
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 0672d22a19 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the
phy-mode for fec1, but missed to fix it for the fec2 node.
Fix fec2 to also use "rgmii-id" as the phy-mode.
Cc: <stable@vger.kernel.org>
Fixes: 0672d22a19 ("ARM: dts: imx: Fix the AR803X phy-mode")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Commit 0672d22a19 ("ARM: dts: imx: Fix the AR803X phy-mode") fixed the
phy-mode for fec1, but missed to fix it for the fec2 node.
Fix fec2 to also use "rgmii-id" as the phy-mode.
Cc: <stable@vger.kernel.org>
Fixes: 0672d22a19 ("ARM: dts: imx: Fix the AR803X phy-mode")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The commit below caused a regression for clearfog-gt-8k, where the link
between the switch and the host does not come up.
Investigation revealed two issues:
- MV88E6xxx DSA no longer allows an in-band link to come up as the link
is programmed to be forced down. Commit "net: dsa: mv88e6xxx: fix
in-band AN link establishment" addresses this.
- The dts configured dissimilar link modes at each end of the host to
switch link; the host was configured using a fixed link (so has no
in-band status) and the switch was configured to expect in-band
status.
With both issues fixed, the regression is resolved.
Fixes: 34b5e6a33c ("net: dsa: mv88e6xxx: Configure MAC when using fixed link")
Reported-by: Martin Rowe <martin.p.rowe@gmail.com>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
This fixes a regression encountered while running the
gdb.base/corefile.exp test in GDB's test suite.
In my testing, the typo prevented the sw_reserved field of struct
fxregs_state from being output to the kernel XSAVES area. Thus the
correct mask corresponding to XCR0 was not present in the core file for
GDB to interrogate, resulting in the following behavior:
[kev@f32-1 gdb]$ ./gdb -q testsuite/outputs/gdb.base/corefile/corefile testsuite/outputs/gdb.base/corefile/corefile.core
Reading symbols from testsuite/outputs/gdb.base/corefile/corefile...
[New LWP 232880]
warning: Unexpected size of section `.reg-xstate/232880' in core file.
With the typo fixed, the test works again as expected.
Signed-off-by: Kevin Buettner <kevinb@redhat.com>
Fixes: 9e46365459 ("copy_xstate_to_kernel(): don't leave parts of destination uninitialized")
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Dave Airlie <airlied@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in the
recent ioperm/iopl rework. This caused the TSS and XEN's I/O bitmap to
get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option is
not sufficient, it needs an explicit -fno-stack-protector to shut it
off.
- Mark check_user_regs() noinstr as it is called from noinstr code. The
missing annotation causes it to be placed in the text section which
makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from ASM
code.
-----BEGIN PGP SIGNATURE-----
iQJHBAABCgAxFiEEQp8+kY+LLUocC4bMphj1TA10mKEFAl8UR+MTHHRnbHhAbGlu
dXRyb25peC5kZQAKCRCmGPVMDXSYoQCUD/4/9W5FFvdZvQPwmXsHPaVnW9hUsXxG
0tjc34xqDcgEl1U3khu+6jj+oHx+JM+4wGP/V49Wqx6xkrJ33/a8uYErAgI7+Pmp
s3T2gXMWkgJtYFlDQdAMbeuuM2cOFZJw4BxxvTMth5EixQvk1EkX6QyBjLaSGo8y
78sWtZ6Oh5Ql9ua/9TOilewLsCsQSFIFn0o/hawwwPUMrwGvD29scha0XHom+AO7
uwejfU8klq2HJJaLaaiUaiNBkFz0TNGJtY+3mQpw8BPjCuuBQhYygrS0X4uQzo01
4XJzhDnOVbAYWqi0/T+mAEmuJ9NBZJwYiYrwBYCkZgELwJKLzhzO2GOgP9xEsFY4
VUNgqHFhKrQp10k2k4L/A5tmr+0GntiCQhdZi+/gty6oO/t3ni57pRcAhA9qBNOb
8ZqumBwgaaAIqcmdtoyXAIveWOHnzwKEg6wmIGFbyCwHjeLJKJG7KhpXIpEuX+j2
DC7EfYvRB+jllAk1CBypBvzD0DHfMZ0myPxCcZiW2wHTVAlkpY7hiIyPHqocjE9L
OjOQ7FS6E2/p24lYVcLUFWcESxGFvQjjxwXk7htjpGUIZsQOhz/LOW+CIPCsfbqE
HoEsHmNltksYYV9FDfevXRp5sbxpx3wQSLOgqNqiOpy4cTCG8boalUqHQ0OsN8Oa
EgU067yF77ymRg==
=QAeH
-----END PGP SIGNATURE-----
Merge tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
- Make the handling of the firmware node consistent and do not free the
node after the domain has been created successfully. The core code
stores a pointer to it which can lead to a use after free or double
free.
This used to "work" because the pointer was not stored when the initial
code was written, but at some point later it was required to store
it. Of course nobody noticed that the existing users break that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled. When interrupts are inactive with
the modern hierarchical irqdomain design, the interrupt chips are not
necessarily in a state where affinity changes can be handled. The legacy
irq chip design allowed this because interrupts are immediately fully
initialized at allocation time. X86 has a hacky workaround for this, but
other implementations do not. This cased malfunction on GIC-V3. Instead
of playing whack a mole to find all affected drivers, change the core
code to store the requested affinity setting and then establish it when
the interrupt is allocated, which makes the X86 hack go away.
-----BEGIN PGP SIGNATURE-----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=elM3
-----END PGP SIGNATURE-----
Merge tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip into master
Pull irq fixes from Thomas Gleixner:
"Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free
the node after the domain has been created successfully. The core
code stores a pointer to it which can lead to a use after free or
double free.
This used to "work" because the pointer was not stored when the
initial code was written, but at some point later it was required
to store it. Of course nobody noticed that the existing users break
that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled.
When interrupts are inactive with the modern hierarchical irqdomain
design, the interrupt chips are not necessarily in a state where
affinity changes can be handled. The legacy irq chip design allowed
this because interrupts are immediately fully initialized at
allocation time. X86 has a hacky workaround for this, but other
implementations do not.
This cased malfunction on GIC-V3. Instead of playing whack a mole
to find all affected drivers, change the core code to store the
requested affinity setting and then establish it when the interrupt
is allocated, which makes the X86 hack go away"
* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Handle affinity setting on inactive interrupts correctly
irqdomain/treewide: Keep firmware node unconditionally allocated
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
Some builds of GCC enable stack protector by default. Simply removing
the arguments is not sufficient to disable stack protector, as the stack
protector for those GCC builds must be explicitly disabled. Remove the
argument removals and add -fno-stack-protector. Additionally include
missed x32 argument updates, and adjust whitespace for readability.
Fixes: 20355e5f73 ("x86/entry: Exclude low level entry code from sanitizing")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook
I have two fixes:
* 16KiB kernel stacks on rv64, which fixes a lot of crashes.
* Rolling an mmiowb() into the scheduled, which when combined with Will's fix
to the mmiowb()-on-spinlock should fix the PREEMPT issues we've been seeing.
-----BEGIN PGP SIGNATURE-----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=XoUI
-----END PGP SIGNATURE-----
Merge tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux into master
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes:
- 16KiB kernel stacks on rv64, which fixes a lot of crashes.
- Rolling an mmiowb() into the scheduler, which when combined with
Will's fix to the mmiowb()-on-spinlock should fix the PREEMPT
issues we've been seeing"
* tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw
riscv: use 16KB kernel stack on 64-bit
A fix to the VAS code we merged this cycle, to report the proper error code to
userspace for address translation failures. And a selftest update to match.
Another fix for our pkey handling of PROT_EXEC mappings.
A fix for a crash when booting a "secure VM" under an ultravisor with certain
numbers of CPUs.
Thanks to:
Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan Das, Satheesh
Rajendran, Thiago Jung Bauermann.
-----BEGIN PGP SIGNATURE-----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=eEXz
-----END PGP SIGNATURE-----
Merge tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux into master
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.8:
- A fix to the VAS code we merged this cycle, to report the proper
error code to userspace for address translation failures. And a
selftest update to match.
- Another fix for our pkey handling of PROT_EXEC mappings.
- A fix for a crash when booting a "secure VM" under an ultravisor
with certain numbers of CPUs.
Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
Das, Satheesh Rajendran, Thiago Jung Bauermann"
* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Use proper error code to check fault address
powerpc/vas: Report proper error code for address translation failure
powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
tss_invalidate_io_bitmap() wasn't wired up properly through the pvop
machinery, so the TSS and Xen's io bitmap would get out of sync
whenever disabling a valid io bitmap.
Add a new pvop for tss_invalidate_io_bitmap() to fix it.
This is XSA-329.
Fixes: 22fe5b0439 ("x86/ioperm: Move TSS bitmap update to exit to user work")
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org
Link: https://lkml.kernel.org/r/d53075590e1f91c19f8af705059d3ff99424c020.1595030016.git.luto@kernel.org
IOSF MBI header contains a lot of definitions, such as
end point addresses of IPs. Move CCK address from AtomISP driver
to generic header.
While here, drop unused one.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Mauro Carvalho Chehab <mchehab+huawei@kernel.org>
This time there are a number of actual code fixes, plus
a small set of device tree issues getting addressed:
- Renesas:
- one defconfig cleanup to allow a later Kconfig change
- Intel socfpga:
- enable QSPI devices on some machines
- fix DTC validation warnings
- TI OMAP:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module
driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
- NXP i.MX
- A couple of fixes on i.MX platform device registration code to stop
the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
- Amlogic Meson
- misc DT fixes
- SoC ID fixes to detect all chips correctly
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=Xlng
-----END PGP SIGNATURE-----
Merge tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc into master
Pull ARM SoC fixes from Arnd Bergmann:
"This time there are a number of actual code fixes, plus a small set of
device tree issues getting addressed:
Renesas:
- one defconfig cleanup to allow a later Kconfig change
Intel socfpga:
- enable QSPI devices on some machines
- fix DTC validation warnings
TI OMAP:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target
module driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
NXP i.MX:
- A couple of fixes on i.MX platform device registration code to
stop the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
Amlogic Meson:
- misc DT fixes
- SoC ID fixes to detect all chips correctly"
* tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema
ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
arm64: dts: stratix10: increase QSPI reg address in nand dts file
arm64: dts: stratix10: add status to qspi dts node
arm64: dts: agilex: add status to qspi dts node
ARM: dts: Fix dcan driver probe failed on am437x platform
ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST
soc: imx: check ls1021a
ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
ARM: imx: Provide correct number of resources when registering gpio devices
ARM: dts: imx6qdl-gw551x: fix audio SSI
bus: ti-sysc: Do not disable on suspend for no-idle
bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
ARM: dts: meson: Align L2 cache-controller nodename with dtschema
arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
arm64: dts: meson: add missing gxl rng clock
soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
- Fix kernel text addresses for relocatable images booting using EFI
and with KASLR disabled so that they match the vmlinux ELF binary.
- Fix unloading and unbinding of PMU driver modules.
- Fix generic mmiowb() when writeX() is called from preemptible context
(reported by the riscv folks).
- Fix ptrace hardware single-step interactions with signal handlers,
system calls and reverse debugging.
- Fix reporting of 64-bit x0 register for 32-bit tasks via 'perf_regs'.
- Add comments describing syscall entry/exit tracing ABI.
-----BEGIN PGP SIGNATURE-----
iQFEBAABCgAuFiEEPxTL6PPUbjXGY88ct6xw3ITBYzQFAl8RgvsQHHdpbGxAa2Vy
bmVsLm9yZwAKCRC3rHDchMFjNKNcB/9wsRJDxQDsCbV83xn5LrpR2qCs6G1UkVWT
7peEQ21Brh60DamHlr9FdwPrIO/C62tQItU/hjCyk5oXZP3soW4J5vAXujP8wPrL
bPe5933HuYkgRnnInCcrACmOnIacO9HGns8OoOKtSdZ6HCaKarL9V4hOfzWVSn7L
RicX+xdn89lzZ+AD2MXYq1Q6mLcpKWx9wa0PSiYL+rGjsUqhwHvJcsYcSMp95/Ay
ZSK27jmxjjTXNW56hE/svz4dzkBvL+8ezwodhjZtz2co8PdGhH2Azbq3QtHeICy+
JB7lSx8A1sYIF3ASAhDYglCOCNlTb1dDN5LYfRwMWZ8cQfnRVdeV
=o4Ve
-----END PGP SIGNATURE-----
Merge tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux into master
Pull arm64 fixes from Will Deacon:
"A batch of arm64 fixes.
Although the diffstat is a bit larger than we'd usually have at this
stage, a decent amount of it is the addition of comments describing
our syscall tracing behaviour, and also a sweep across all the modular
arm64 PMU drivers to make them rebust against unloading and unbinding.
There are a couple of minor things kicking around at the moment (CPU
errata and module PLTs for very large modules), but I'm not expecting
any significant changes now for us in 5.8.
- Fix kernel text addresses for relocatable images booting using EFI
and with KASLR disabled so that they match the vmlinux ELF binary.
- Fix unloading and unbinding of PMU driver modules.
- Fix generic mmiowb() when writeX() is called from preemptible
context (reported by the riscv folks).
- Fix ptrace hardware single-step interactions with signal handlers,
system calls and reverse debugging.
- Fix reporting of 64-bit x0 register for 32-bit tasks via
'perf_regs'.
- Add comments describing syscall entry/exit tracing ABI"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
drivers/perf: Prevent forced unbinding of PMU drivers
asm-generic/mmiowb: Allow mmiowb_set_pending() when preemptible()
arm64: Use test_tsk_thread_flag() for checking TIF_SINGLESTEP
arm64: ptrace: Use NO_SYSCALL instead of -1 in syscall_trace_enter()
arm64: syscall: Expand the comment about ptrace and syscall(-1)
arm64: ptrace: Add a comment describing our syscall entry/exit trap ABI
arm64: compat: Ensure upper 32 bits of x0 are zero on syscall return
arm64: ptrace: Override SPSR.SS when single-stepping is enabled
arm64: ptrace: Consistently use pseudo-singlestep exceptions
drivers/perf: Fix kernel panic when rmmod PMU modules during perf sampling
efi/libstub/arm64: Retain 2MB kernel Image alignment if !KASLR
Setting interrupt affinity on inactive interrupts is inconsistent when
hierarchical irq domains are enabled. The core code should just store the
affinity and not call into the irq chip driver for inactive interrupts
because the chip drivers may not be in a state to handle such requests.
X86 has a hacky workaround for that but all other irq chips have not which
causes problems e.g. on GIC V3 ITS.
Instead of adding more ugly hacks all over the place, solve the problem in
the core code. If the affinity is set on an inactive interrupt then:
- Store it in the irq descriptors affinity mask
- Update the effective affinity to reflect that so user space has
a consistent view
- Don't call into the irq chip driver
This is the core equivalent of the X86 workaround and works correctly
because the affinity setting is established in the irq chip when the
interrupt is activated later on.
Note, that this is only effective when hierarchical irq domains are enabled
by the architecture. Doing it unconditionally would break legacy irq chip
implementations.
For hierarchial irq domains this works correctly as none of the drivers can
have a dependency on affinity setting in inactive state by design.
Remove the X86 workaround as it is not longer required.
Fixes: 02edee152d ("x86/apic/vector: Ignore set_affinity call for inactive interrupts")
Reported-by: Ali Saidi <alisaidi@amazon.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Tested-by: Ali Saidi <alisaidi@amazon.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20200529015501.15771-1-alisaidi@amazon.com
Link: https://lkml.kernel.org/r/877dv2rv25.fsf@nanos.tec.linutronix.de
While digging through the recent mmiowb preemption issue it came up that
we aren't actually preventing IO from crossing a scheduling boundary.
While it's a bit ugly to overload smp_mb__after_spinlock() with this
behavior, it's what PowerPC is doing so there's some precedent.
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
- Replace CONFIG_PCIE_RCAR by CONFIG_PCIE_RCAR_HOST in the defconfig,
to unblock a planned Kconfig change.
-----BEGIN PGP SIGNATURE-----
iHUEABYIAB0WIQQ9qaHoIs/1I4cXmEiKwlD9ZEnxcAUCXxFjTwAKCRCKwlD9ZEnx
cIf6APoC85p0Tofdr0qTIqJvESf4ACxb5mx4rBU8h0TfzQfGRgEAy5VsZexFcstn
+pDp+o7Wp+BhnRVLAkQOaGF/7Bhy5Qs=
=nsrT
-----END PGP SIGNATURE-----
Merge tag 'renesas-fixes-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel into arm/fixes
Renesas fixes for v5.8
- Replace CONFIG_PCIE_RCAR by CONFIG_PCIE_RCAR_HOST in the defconfig,
to unblock a planned Kconfig change.
* tag 'renesas-fixes-for-v5.8-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST
Link: https://lore.kernel.org/r/20200717100523.15418-1-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Few fixes for issues noticed during testing:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module
driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
-----BEGIN PGP SIGNATURE-----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=ekbH
-----END PGP SIGNATURE-----
Merge tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into arm/fixes
Fixes for omaps for v5.8-rc cycle
Few fixes for issues noticed during testing:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target module
driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
* tag 'omap-for-v5.8/fixes-rc5-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: Fix dcan driver probe failed on am437x platform
ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
bus: ti-sysc: Do not disable on suspend for no-idle
bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
Link: https://lore.kernel.org/r/pull-1594840100-132735@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
