ARM: mxs: dt: Add the Crystalfontz CFA-10055 device tree
The CFA-10055 is yet another breakout board for the CFA-10036, and is basically a CFA-10037, with the screen and LCD controller found on the CFA-10049. Signed-off-by: Brian Lilly <brian@crystalfontz.com> Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
This commit is contained in:
Brian Lilly
Shawn Guo
parent
65bc642f1b
commit
ed138c368d
@ -130,6 +130,7 @@ dtb-$(CONFIG_ARCH_MXS) += imx23-evk.dtb \
|
|||||||
imx28-cfa10036.dtb \
|
imx28-cfa10036.dtb \
|
||||||
imx28-cfa10037.dtb \
|
imx28-cfa10037.dtb \
|
||||||
imx28-cfa10049.dtb \
|
imx28-cfa10049.dtb \
|
||||||
|
imx28-cfa10055.dtb \
|
||||||
imx28-evk.dtb \
|
imx28-evk.dtb \
|
||||||
imx28-m28evk.dtb \
|
imx28-m28evk.dtb \
|
||||||
imx28-sps1.dtb \
|
imx28-sps1.dtb \
|
||||||
|
|||||||
179
arch/arm/boot/dts/imx28-cfa10055.dts
Normal file
179
arch/arm/boot/dts/imx28-cfa10055.dts
Normal file
@ -0,0 +1,179 @@
|
|||||||
|
/*
|
||||||
|
* Copyright 2013 Crystalfontz America, Inc.
|
||||||
|
* Free Electrons
|
||||||
|
*
|
||||||
|
* The code contained herein is licensed under the GNU General Public
|
||||||
|
* License. You may obtain a copy of the GNU General Public License
|
||||||
|
* Version 2 or later at the following locations:
|
||||||
|
*
|
||||||
|
* http://www.opensource.org/licenses/gpl-license.html
|
||||||
|
* http://www.gnu.org/copyleft/gpl.html
|
||||||
|
*/
|
||||||
|
|
||||||
|
/*
|
||||||
|
* The CFA-10055 is an expansion board for the CFA-10036 module and
|
||||||
|
* CFA-10037, thus we need to include the CFA-10037 DTS.
|
||||||
|
*/
|
||||||
|
/include/ "imx28-cfa10037.dts"
|
||||||
|
|
||||||
|
/ {
|
||||||
|
model = "Crystalfontz CFA-10055 Board";
|
||||||
|
compatible = "crystalfontz,cfa10055", "crystalfontz,cfa10037", "crystalfontz,cfa10036", "fsl,imx28";
|
||||||
|
|
||||||
|
apb@80000000 {
|
||||||
|
apbh@80000000 {
|
||||||
|
pinctrl@80018000 {
|
||||||
|
pinctrl-names = "default", "default";
|
||||||
|
pinctrl-1 = <&hog_pins_cfa10055
|
||||||
|
&hog_pins_cfa10055_pullup>;
|
||||||
|
|
||||||
|
hog_pins_cfa10055: hog-10055@0 {
|
||||||
|
reg = <0>;
|
||||||
|
fsl,pinmux-ids = <
|
||||||
|
0x3053 /* MX28_PAD_AUART1_TX__GPIO_3_5 */
|
||||||
|
>;
|
||||||
|
fsl,drive-strength = <0>;
|
||||||
|
fsl,voltage = <1>;
|
||||||
|
fsl,pull-up = <0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
hog_pins_cfa10055_pullup: hog-10055-pullup@0 {
|
||||||
|
reg = <0>;
|
||||||
|
fsl,pinmux-ids = <
|
||||||
|
0x31e3 /* MX28_PAD_LCD_RESET__GPIO_3_30 */
|
||||||
|
>;
|
||||||
|
fsl,drive-strength = <0>;
|
||||||
|
fsl,voltage = <1>;
|
||||||
|
fsl,pull-up = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
spi2_pins_cfa10055: spi2-cfa10055@0 {
|
||||||
|
reg = <0>;
|
||||||
|
fsl,pinmux-ids = <
|
||||||
|
0x2103 /* MX28_PAD_SSP2_SCK__GPIO_2_16 */
|
||||||
|
0x2113 /* MX28_PAD_SSP2_CMD__GPIO_2_17 */
|
||||||
|
0x2123 /* MX28_PAD_SSP2_D0__GPIO_2_18 */
|
||||||
|
>;
|
||||||
|
fsl,drive-strength = <1>;
|
||||||
|
fsl,voltage = <1>;
|
||||||
|
fsl,pull-up = <1>;
|
||||||
|
};
|
||||||
|
|
||||||
|
lcdif_18bit_pins_cfa10055: lcdif-18bit@0 {
|
||||||
|
reg = <0>;
|
||||||
|
fsl,pinmux-ids = <
|
||||||
|
0x1000 /* MX28_PAD_LCD_D00__LCD_D0 */
|
||||||
|
0x1010 /* MX28_PAD_LCD_D01__LCD_D1 */
|
||||||
|
0x1020 /* MX28_PAD_LCD_D02__LCD_D2 */
|
||||||
|
0x1030 /* MX28_PAD_LCD_D03__LCD_D3 */
|
||||||
|
0x1040 /* MX28_PAD_LCD_D04__LCD_D4 */
|
||||||
|
0x1050 /* MX28_PAD_LCD_D05__LCD_D5 */
|
||||||
|
0x1060 /* MX28_PAD_LCD_D06__LCD_D6 */
|
||||||
|
0x1070 /* MX28_PAD_LCD_D07__LCD_D7 */
|
||||||
|
0x1080 /* MX28_PAD_LCD_D08__LCD_D8 */
|
||||||
|
0x1090 /* MX28_PAD_LCD_D09__LCD_D9 */
|
||||||
|
0x10a0 /* MX28_PAD_LCD_D10__LCD_D10 */
|
||||||
|
0x10b0 /* MX28_PAD_LCD_D11__LCD_D11 */
|
||||||
|
0x10c0 /* MX28_PAD_LCD_D12__LCD_D12 */
|
||||||
|
0x10d0 /* MX28_PAD_LCD_D13__LCD_D13 */
|
||||||
|
0x10e0 /* MX28_PAD_LCD_D14__LCD_D14 */
|
||||||
|
0x10f0 /* MX28_PAD_LCD_D15__LCD_D15 */
|
||||||
|
0x1100 /* MX28_PAD_LCD_D16__LCD_D16 */
|
||||||
|
0x1110 /* MX28_PAD_LCD_D17__LCD_D17 */
|
||||||
|
>;
|
||||||
|
fsl,drive-strength = <0>;
|
||||||
|
fsl,voltage = <1>;
|
||||||
|
fsl,pull-up = <0>;
|
||||||
|
};
|
||||||
|
|
||||||
|
lcdif_pins_cfa10055: lcdif-evk@0 {
|
||||||
|
reg = <0>;
|
||||||
|
fsl,pinmux-ids = <
|
||||||
|
0x1181 /* MX28_PAD_LCD_RD_E__LCD_VSYNC */
|
||||||
|
0x1191 /* MX28_PAD_LCD_WR_RWN__LCD_HSYNC */
|
||||||
|
0x11a1 /* MX28_PAD_LCD_RS__LCD_DOTCLK */
|
||||||
|
0x11b1 /* MX28_PAD_LCD_CS__LCD_ENABLE */
|
||||||
|
>;
|
||||||
|
fsl,drive-strength = <0>;
|
||||||
|
fsl,voltage = <1>;
|
||||||
|
fsl,pull-up = <0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
lcdif@80030000 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&lcdif_18bit_pins_cfa10055
|
||||||
|
&lcdif_pins_cfa10055>;
|
||||||
|
display = <&display>;
|
||||||
|
status = "okay";
|
||||||
|
|
||||||
|
display: display {
|
||||||
|
bits-per-pixel = <32>;
|
||||||
|
bus-width = <18>;
|
||||||
|
|
||||||
|
display-timings {
|
||||||
|
native-mode = <&timing0>;
|
||||||
|
timing0: timing0 {
|
||||||
|
clock-frequency = <9216000>;
|
||||||
|
hactive = <320>;
|
||||||
|
vactive = <480>;
|
||||||
|
hback-porch = <2>;
|
||||||
|
hfront-porch = <2>;
|
||||||
|
vback-porch = <2>;
|
||||||
|
vfront-porch = <2>;
|
||||||
|
hsync-len = <15>;
|
||||||
|
vsync-len = <15>;
|
||||||
|
hsync-active = <0>;
|
||||||
|
vsync-active = <0>;
|
||||||
|
de-active = <1>;
|
||||||
|
pixelclk-active = <1>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
apbx@80040000 {
|
||||||
|
lradc@80050000 {
|
||||||
|
fsl,lradc-touchscreen-wires = <4>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
|
||||||
|
pwm: pwm@80064000 {
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&pwm3_pins_b>;
|
||||||
|
status = "okay";
|
||||||
|
};
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
spi2 {
|
||||||
|
compatible = "spi-gpio";
|
||||||
|
pinctrl-names = "default";
|
||||||
|
pinctrl-0 = <&spi2_pins_cfa10055>;
|
||||||
|
status = "okay";
|
||||||
|
gpio-sck = <&gpio2 16 0>;
|
||||||
|
gpio-mosi = <&gpio2 17 0>;
|
||||||
|
gpio-miso = <&gpio2 18 0>;
|
||||||
|
cs-gpios = <&gpio3 5 0>;
|
||||||
|
num-chipselects = <1>;
|
||||||
|
#address-cells = <1>;
|
||||||
|
#size-cells = <0>;
|
||||||
|
|
||||||
|
hx8357: hx8357@0 {
|
||||||
|
compatible = "himax,hx8357b", "himax,hx8357";
|
||||||
|
reg = <0>;
|
||||||
|
spi-max-frequency = <100000>;
|
||||||
|
spi-cpol;
|
||||||
|
spi-cpha;
|
||||||
|
gpios-reset = <&gpio3 30 0>;
|
||||||
|
};
|
||||||
|
};
|
||||||
|
|
||||||
|
backlight {
|
||||||
|
compatible = "pwm-backlight";
|
||||||
|
pwms = <&pwm 3 5000000>;
|
||||||
|
brightness-levels = <0 4 8 16 32 64 128 255>;
|
||||||
|
default-brightness-level = <6>;
|
||||||
|
};
|
||||||
|
};
|
||||||
@ -368,12 +368,7 @@ static void __init tx28_post_init(void)
|
|||||||
pinctrl_put(pctl);
|
pinctrl_put(pctl);
|
||||||
}
|
}
|
||||||
|
|
||||||
static void __init cfa10049_init(void)
|
static void __init crystalfontz_init(void)
|
||||||
{
|
|
||||||
update_fec_mac_prop(OUI_CRYSTALFONTZ);
|
|
||||||
}
|
|
||||||
|
|
||||||
static void __init cfa10037_init(void)
|
|
||||||
{
|
{
|
||||||
update_fec_mac_prop(OUI_CRYSTALFONTZ);
|
update_fec_mac_prop(OUI_CRYSTALFONTZ);
|
||||||
}
|
}
|
||||||
@ -482,10 +477,10 @@ static void __init mxs_machine_init(void)
|
|||||||
imx28_evk_init();
|
imx28_evk_init();
|
||||||
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
|
else if (of_machine_is_compatible("bluegiga,apx4devkit"))
|
||||||
apx4devkit_init();
|
apx4devkit_init();
|
||||||
else if (of_machine_is_compatible("crystalfontz,cfa10037"))
|
else if (of_machine_is_compatible("crystalfontz,cfa10037") ||
|
||||||
cfa10037_init();
|
of_machine_is_compatible("crystalfontz,cfa10049") ||
|
||||||
else if (of_machine_is_compatible("crystalfontz,cfa10049"))
|
of_machine_is_compatible("crystalfontz,cfa10055"))
|
||||||
cfa10049_init();
|
crystalfontz_init();
|
||||||
|
|
||||||
of_platform_populate(NULL, of_default_bus_match_table,
|
of_platform_populate(NULL, of_default_bus_match_table,
|
||||||
mxs_auxdata_lookup, parent);
|
mxs_auxdata_lookup, parent);
|
||||||
|
|||||||
Loading…
Reference in New Issue
Block a user