ARM: OMAP2+: Use pdata quirks for wl12xx on the AM335x EV-MSK
Enable the WiLink6 connected to mmc2. Signed-off-by: Imre Kaloz <kaloz@openwrt.org Signed-off-by: Tony Lindgren <tony@atomide.com>
This commit is contained in:
parent
c792349ee7
commit
90f4f01ba5
@ -45,6 +45,18 @@ lis3_reg: fixedregulator@1 {
|
||||
regulator-boot-on;
|
||||
};
|
||||
|
||||
wl12xx_vmmc: fixedregulator@2 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&wl12xx_gpio>;
|
||||
compatible = "regulator-fixed";
|
||||
regulator-name = "vwl1271";
|
||||
regulator-min-microvolt = <1800000>;
|
||||
regulator-max-microvolt = <1800000>;
|
||||
gpio = <&gpio1 29 0>;
|
||||
startup-delay-us = <70000>;
|
||||
enable-active-high;
|
||||
};
|
||||
|
||||
leds {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&user_leds_s0>;
|
||||
@ -264,6 +276,24 @@ mcasp1_pins: mcasp1_pins {
|
||||
0x144 (PIN_INPUT_PULLDOWN | MUX_MODE4) /* rmii1_ref_clk.mcasp1_axr3 */
|
||||
>;
|
||||
};
|
||||
|
||||
mmc2_pins: pinmux_mmc2_pins {
|
||||
pinctrl-single,pins = <
|
||||
0x74 (PIN_INPUT_PULLUP | MUX_MODE7) /* gpmc_wpn.gpio0_31 */
|
||||
0x80 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn1.mmc1_clk */
|
||||
0x84 (PIN_INPUT_PULLUP | MUX_MODE2) /* gpmc_csn2.mmc1_cmd */
|
||||
0x00 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad0.mmc1_dat0 */
|
||||
0x04 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad1.mmc1_dat1 */
|
||||
0x08 (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad2.mmc1_dat2 */
|
||||
0x0c (PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_ad3.mmc1_dat3 */
|
||||
>;
|
||||
};
|
||||
|
||||
wl12xx_gpio: pinmux_wl12xx_gpio {
|
||||
pinctrl-single,pins = <
|
||||
0x7c (PIN_OUTPUT_PULLUP | MUX_MODE7) /* gpmc_csn0.gpio1_29 */
|
||||
>;
|
||||
};
|
||||
};
|
||||
|
||||
&uart0 {
|
||||
@ -479,6 +509,16 @@ &gpio0 {
|
||||
ti,no-reset-on-init;
|
||||
};
|
||||
|
||||
&mmc2 {
|
||||
status = "okay";
|
||||
vmmc-supply = <&wl12xx_vmmc>;
|
||||
ti,non-removable;
|
||||
bus-width = <4>;
|
||||
cap-power-off-card;
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mmc2_pins>;
|
||||
};
|
||||
|
||||
&mcasp1 {
|
||||
pinctrl-names = "default";
|
||||
pinctrl-0 = <&mcasp1_pins>;
|
||||
|
@ -233,6 +233,13 @@ static void __init omap4_panda_legacy_init(void)
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SOC_AM33XX
|
||||
static void __init am335x_evmsk_legacy_init(void)
|
||||
{
|
||||
legacy_init_wl12xx(WL12XX_REFCLOCK_38, 0, 31);
|
||||
}
|
||||
#endif
|
||||
|
||||
#ifdef CONFIG_SOC_OMAP5
|
||||
static void __init omap5_uevm_legacy_init(void)
|
||||
{
|
||||
@ -318,6 +325,9 @@ static struct pdata_init pdata_quirks[] __initdata = {
|
||||
{ "ti,omap4-sdp", omap4_sdp_legacy_init, },
|
||||
{ "ti,omap4-panda", omap4_panda_legacy_init, },
|
||||
#endif
|
||||
#ifdef CONFIG_SOC_AM33XX
|
||||
{ "ti,am335x-evmsk", am335x_evmsk_legacy_init, },
|
||||
#endif
|
||||
#ifdef CONFIG_SOC_OMAP5
|
||||
{ "ti,omap5-uevm", omap5_uevm_legacy_init, },
|
||||
#endif
|
||||
|
Loading…
Reference in New Issue
Block a user