Documentation: document ioctl interfaces better

Documentation/process/botching-up-ioctls.rst was orignally written as
a blog post for DRM driver writers, so it it misses some points while
going into a lot of detail on others.

Try to provide a replacement that addresses typical issues across a wider
range of subsystems, and follows the style of the core-api documentation
better.

Many improvements to the document are suggested by Ben Hutchings
<ben.hutchings@codethink.co.uk>, Jonathan Corbet <corbet@lwn.net> and
Geert Uytterhoeven <geert@linux-m68k.org>.

Reviewed-by: Ben Hutchings <ben.hutchings@codethink.co.uk>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Documentation/core-api/index.rst

@@ -39,6 +39,7 @@ Core utilities
    ../RCU/index
    gcc-plugins
    symbol-namespaces
+   ioctl
 
 
 Interfaces for kernel debugging

Documentation/core-api/ioctl.rst

@@ -0,0 +1,253 @@
+======================
+ioctl based interfaces
+======================
+
+ioctl() is the most common way for applications to interface
+with device drivers. It is flexible and easily extended by adding new
+commands and can be passed through character devices, block devices as
+well as sockets and other special file descriptors.
+
+However, it is also very easy to get ioctl command definitions wrong,
+and hard to fix them later without breaking existing applications,
+so this documentation tries to help developers get it right.
+
+Command number definitions
+==========================
+
+The command number, or request number, is the second argument passed to
+the ioctl system call. While this can be any 32-bit number that uniquely
+identifies an action for a particular driver, there are a number of
+conventions around defining them.
+
+``include/uapi/asm-generic/ioctl.h`` provides four macros for defining
+ioctl commands that follow modern conventions: ``_IO``, ``_IOR``,
+``_IOW``, and ``_IOWR``. These should be used for all new commands,
+with the correct parameters:
+
+_IO/_IOR/_IOW/_IOWR
+   The macro name specifies how the argument will be used.  It may be a
+   pointer to data to be passed into the kernel (_IOW), out of the kernel
+   (_IOR), or both (_IOWR).  _IO can indicate either commands with no
+   argument or those passing an integer value instead of a pointer.
+   It is recommended to only use _IO for commands without arguments,
+   and use pointers for passing data.
+
+type
+   An 8-bit number, often a character literal, specific to a subsystem
+   or driver, and listed in :doc:`../userspace-api/ioctl/ioctl-number`
+
+nr
+  An 8-bit number identifying the specific command, unique for a give
+  value of 'type'
+
+data_type
+  The name of the data type pointed to by the argument, the command number
+  encodes the ``sizeof(data_type)`` value in a 13-bit or 14-bit integer,
+  leading to a limit of 8191 bytes for the maximum size of the argument.
+  Note: do not pass sizeof(data_type) type into _IOR/_IOW/IOWR, as that
+  will lead to encoding sizeof(sizeof(data_type)), i.e. sizeof(size_t).
+  _IO does not have a data_type parameter.
+
+
+Interface versions
+==================
+
+Some subsystems use version numbers in data structures to overload
+commands with different interpretations of the argument.
+
+This is generally a bad idea, since changes to existing commands tend
+to break existing applications.
+
+A better approach is to add a new ioctl command with a new number. The
+old command still needs to be implemented in the kernel for compatibility,
+but this can be a wrapper around the new implementation.
+
+Return code
+===========
+
+ioctl commands can return negative error codes as documented in errno(3);
+these get turned into errno values in user space. On success, the return
+code should be zero. It is also possible but not recommended to return
+a positive 'long' value.
+
+When the ioctl callback is called with an unknown command number, the
+handler returns either -ENOTTY or -ENOIOCTLCMD, which also results in
+-ENOTTY being returned from the system call. Some subsystems return
+-ENOSYS or -EINVAL here for historic reasons, but this is wrong.
+
+Prior to Linux 5.5, compat_ioctl handlers were required to return
+-ENOIOCTLCMD in order to use the fallback conversion into native
+commands. As all subsystems are now responsible for handling compat
+mode themselves, this is no longer needed, but it may be important to
+consider when backporting bug fixes to older kernels.
+
+Timestamps
+==========
+
+Traditionally, timestamps and timeout values are passed as ``struct
+timespec`` or ``struct timeval``, but these are problematic because of
+incompatible definitions of these structures in user space after the
+move to 64-bit time_t.
+
+The ``struct __kernel_timespec`` type can be used instead to be embedded
+in other data structures when separate second/nanosecond values are
+desired, or passed to user space directly. This is still not ideal though,
+as the structure matches neither the kernel's timespec64 nor the user
+space timespec exactly. The get_timespec64() and put_timespec64() helper
+functions can be used to ensure that the layout remains compatible with
+user space and the padding is treated correctly.
+
+As it is cheap to convert seconds to nanoseconds, but the opposite
+requires an expensive 64-bit division, a simple __u64 nanosecond value
+can be simpler and more efficient.
+
+Timeout values and timestamps should ideally use CLOCK_MONOTONIC time,
+as returned by ktime_get_ns() or ktime_get_ts64().  Unlike
+CLOCK_REALTIME, this makes the timestamps immune from jumping backwards
+or forwards due to leap second adjustments and clock_settime() calls.
+
+ktime_get_real_ns() can be used for CLOCK_REALTIME timestamps that
+need to be persistent across a reboot or between multiple machines.
+
+32-bit compat mode
+==================
+
+In order to support 32-bit user space running on a 64-bit machine, each
+subsystem or driver that implements an ioctl callback handler must also
+implement the corresponding compat_ioctl handler.
+
+As long as all the rules for data structures are followed, this is as
+easy as setting the .compat_ioctl pointer to a helper function such as
+compat_ptr_ioctl() or blkdev_compat_ptr_ioctl().
+
+compat_ptr()
+------------
+
+On the s390 architecture, 31-bit user space has ambiguous representations
+for data pointers, with the upper bit being ignored. When running such
+a process in compat mode, the compat_ptr() helper must be used to
+clear the upper bit of a compat_uptr_t and turn it into a valid 64-bit
+pointer.  On other architectures, this macro only performs a cast to a
+``void __user *`` pointer.
+
+In an compat_ioctl() callback, the last argument is an unsigned long,
+which can be interpreted as either a pointer or a scalar depending on
+the command. If it is a scalar, then compat_ptr() must not be used, to
+ensure that the 64-bit kernel behaves the same way as a 32-bit kernel
+for arguments with the upper bit set.
+
+The compat_ptr_ioctl() helper can be used in place of a custom
+compat_ioctl file operation for drivers that only take arguments that
+are pointers to compatible data structures.
+
+Structure layout
+----------------
+
+Compatible data structures have the same layout on all architectures,
+avoiding all problematic members:
+
+* ``long`` and ``unsigned long`` are the size of a register, so
+  they can be either 32-bit or 64-bit wide and cannot be used in portable
+  data structures. Fixed-length replacements are ``__s32``, ``__u32``,
+  ``__s64`` and ``__u64``.
+
+* Pointers have the same problem, in addition to requiring the
+  use of compat_ptr(). The best workaround is to use ``__u64``
+  in place of pointers, which requires a cast to ``uintptr_t`` in user
+  space, and the use of u64_to_user_ptr() in the kernel to convert
+  it back into a user pointer.
+
+* On the x86-32 (i386) architecture, the alignment of 64-bit variables
+  is only 32-bit, but they are naturally aligned on most other
+  architectures including x86-64. This means a structure like::
+
+    struct foo {
+        __u32 a;
+        __u64 b;
+        __u32 c;
+    };
+
+  has four bytes of padding between a and b on x86-64, plus another four
+  bytes of padding at the end, but no padding on i386, and it needs a
+  compat_ioctl conversion handler to translate between the two formats.
+
+  To avoid this problem, all structures should have their members
+  naturally aligned, or explicit reserved fields added in place of the
+  implicit padding. The ``pahole`` tool can be used for checking the
+  alignment.
+
+* On ARM OABI user space, structures are padded to multiples of 32-bit,
+  making some structs incompatible with modern EABI kernels if they
+  do not end on a 32-bit boundary.
+
+* On the m68k architecture, struct members are not guaranteed to have an
+  alignment greater than 16-bit, which is a problem when relying on
+  implicit padding.
+
+* Bitfields and enums generally work as one would expect them to,
+  but some properties of them are implementation-defined, so it is better
+  to avoid them completely in ioctl interfaces.
+
+* ``char`` members can be either signed or unsigned, depending on
+  the architecture, so the __u8 and __s8 types should be used for 8-bit
+  integer values, though char arrays are clearer for fixed-length strings.
+
+Information leaks
+=================
+
+Uninitialized data must not be copied back to user space, as this can
+cause an information leak, which can be used to defeat kernel address
+space layout randomization (KASLR), helping in an attack.
+
+For this reason (and for compat support) it is best to avoid any
+implicit padding in data structures.  Where there is implicit padding
+in an existing structure, kernel drivers must be careful to fully
+initialize an instance of the structure before copying it to user
+space.  This is usually done by calling memset() before assigning to
+individual members.
+
+Subsystem abstractions
+======================
+
+While some device drivers implement their own ioctl function, most
+subsystems implement the same command for multiple drivers.  Ideally the
+subsystem has an .ioctl() handler that copies the arguments from and
+to user space, passing them into subsystem specific callback functions
+through normal kernel pointers.
+
+This helps in various ways:
+
+* Applications written for one driver are more likely to work for
+  another one in the same subsystem if there are no subtle differences
+  in the user space ABI.
+
+* The complexity of user space access and data structure layout is done
+  in one place, reducing the potential for implementation bugs.
+
+* It is more likely to be reviewed by experienced developers
+  that can spot problems in the interface when the ioctl is shared
+  between multiple drivers than when it is only used in a single driver.
+
+Alternatives to ioctl
+=====================
+
+There are many cases in which ioctl is not the best solution for a
+problem. Alternatives include:
+
+* System calls are a better choice for a system-wide feature that
+  is not tied to a physical device or constrained by the file system
+  permissions of a character device node
+
+* netlink is the preferred way of configuring any network related
+  objects through sockets.
+
+* debugfs is used for ad-hoc interfaces for debugging functionality
+  that does not need to be exposed as a stable interface to applications.
+
+* sysfs is a good way to expose the state of an in-kernel object
+  that is not tied to a file descriptor.
+
+* configfs can be used for more complex configuration than sysfs
+
+* A custom file system can provide extra flexibility with a simple
+  user interface but adds a lot of complexity to the implementation.