From 3e47740091b05ac8d7836a33afd8646b6863ca52 Mon Sep 17 00:00:00 2001 From: Eric Biggers Date: Mon, 6 Nov 2023 20:44:34 -0800 Subject: [PATCH 001/288] f2fs: explicitly null-terminate the xattr list commit e26b6d39270f5eab0087453d9b544189a38c8564 upstream. When setting an xattr, explicitly null-terminate the xattr list. This eliminates the fragile assumption that the unused xattr space is always zeroed. Signed-off-by: Eric Biggers Reviewed-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Greg Kroah-Hartman --- fs/f2fs/xattr.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/fs/f2fs/xattr.c b/fs/f2fs/xattr.c index f44c60114379..dd50b747b671 100644 --- a/fs/f2fs/xattr.c +++ b/fs/f2fs/xattr.c @@ -741,6 +741,12 @@ static int __f2fs_setxattr(struct inode *inode, int index, memcpy(pval, value, size); last->e_value_size = cpu_to_le16(size); new_hsize += newsize; + /* + * Explicitly add the null terminator. The unused xattr space + * is supposed to always be zeroed, which would make this + * unnecessary, but don't depend on that. + */ + *(u32 *)((u8 *)last + newsize) = 0; } error = write_all_xattrs(inode, new_hsize, base_addr, ipage); From 94e192054fac7bc6f138883ffdd05b480983fee4 Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Wed, 15 Nov 2023 16:28:53 +0000 Subject: [PATCH 002/288] pinctrl: lochnagar: Don't build on MIPS [ Upstream commit 6588732445ff19f6183f0fa72ddedf67e5a5be32 ] MIPS appears to define a RST symbol at a high level, which clashes with some register naming in the driver. Since there is currently no case for running this driver on MIPS devices simply cut off the build of this driver on MIPS. Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311071303.JJMAOjy4-lkp@intel.com/ Suggested-by: Linus Walleij Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20231115162853.1891940-1-ckeepax@opensource.cirrus.com Signed-off-by: Linus Walleij Signed-off-by: Sasha Levin --- drivers/pinctrl/cirrus/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/pinctrl/cirrus/Kconfig b/drivers/pinctrl/cirrus/Kconfig index 530426a74f75..b3cea8d56c4f 100644 --- a/drivers/pinctrl/cirrus/Kconfig +++ b/drivers/pinctrl/cirrus/Kconfig @@ -1,7 +1,8 @@ # SPDX-License-Identifier: GPL-2.0-only config PINCTRL_LOCHNAGAR tristate "Cirrus Logic Lochnagar pinctrl driver" - depends on MFD_LOCHNAGAR + # Avoid clash caused by MIPS defining RST, which is used in the driver + depends on MFD_LOCHNAGAR && !MIPS select GPIOLIB select PINMUX select PINCONF From 6b00598b64dd26ff29f57dc566ba66a0feefbee4 Mon Sep 17 00:00:00 2001 From: Vasiliy Kovalev Date: Fri, 17 Nov 2023 20:09:23 +0300 Subject: [PATCH 003/288] ALSA: hda - Fix speaker and headset mic pin config for CHUWI CoreBook XPro [ Upstream commit 7c9caa299335df94ad1c58f70a22f16a540eab60 ] This patch corrected the speaker and headset mic pin config to the more appropriate values. Signed-off-by: Vasiliy Kovalev Link: https://lore.kernel.org/r/20231117170923.106822-1-kovalev@altlinux.org Signed-off-by: Takashi Iwai Signed-off-by: Sasha Levin --- sound/pci/hda/patch_realtek.c | 10 ++++++++++ 1 file changed, 10 insertions(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 99ba89723cd3..c7e76bfad84d 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -6797,6 +6797,7 @@ enum { ALC290_FIXUP_SUBWOOFER_HSJACK, ALC269_FIXUP_THINKPAD_ACPI, ALC269_FIXUP_DMIC_THINKPAD_ACPI, + ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO, ALC255_FIXUP_ACER_MIC_NO_PRESENCE, ALC255_FIXUP_ASUS_MIC_NO_PRESENCE, ALC255_FIXUP_DELL1_MIC_NO_PRESENCE, @@ -7094,6 +7095,14 @@ static const struct hda_fixup alc269_fixups[] = { .type = HDA_FIXUP_FUNC, .v.func = alc269_fixup_pincfg_U7x7_headset_mic, }, + [ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO] = { + .type = HDA_FIXUP_PINS, + .v.pins = (const struct hda_pintbl[]) { + { 0x18, 0x03a19020 }, /* headset mic */ + { 0x1b, 0x90170150 }, /* speaker */ + { } + }, + }, [ALC269_FIXUP_AMIC] = { .type = HDA_FIXUP_PINS, .v.pins = (const struct hda_pintbl[]) { @@ -9320,6 +9329,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x1d72, 0x1901, "RedmiBook 14", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1945, "Redmi G", ALC256_FIXUP_ASUS_HEADSET_MIC), SND_PCI_QUIRK(0x1d72, 0x1947, "RedmiBook Air", ALC255_FIXUP_XIAOMI_HEADSET_MIC), + SND_PCI_QUIRK(0x2782, 0x0232, "CHUWI CoreBook XPro", ALC269VB_FIXUP_CHUWI_COREBOOK_XPRO), SND_PCI_QUIRK(0x8086, 0x2074, "Intel NUC 8", ALC233_FIXUP_INTEL_NUC8_DMIC), SND_PCI_QUIRK(0x8086, 0x2080, "Intel NUC 8 Rugged", ALC256_FIXUP_INTEL_NUC8_RUGGED), SND_PCI_QUIRK(0x8086, 0x2081, "Intel NUC 10", ALC256_FIXUP_INTEL_NUC10), From 65bde47aaddcd7576537241f017fe21b02af0c12 Mon Sep 17 00:00:00 2001 From: Edward Adam Davis Date: Thu, 23 Nov 2023 09:23:39 +0800 Subject: [PATCH 004/288] mptcp: fix uninit-value in mptcp_incoming_options [ Upstream commit 237ff253f2d4f6307b7b20434d7cbcc67693298b ] Added initialization use_ack to mptcp_parse_option(). Reported-by: syzbot+b834a6b2decad004cfa1@syzkaller.appspotmail.com Signed-off-by: Edward Adam Davis Acked-by: Paolo Abeni Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/mptcp/options.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/mptcp/options.c b/net/mptcp/options.c index 64afe71e2129..c389d7e47135 100644 --- a/net/mptcp/options.c +++ b/net/mptcp/options.c @@ -92,6 +92,7 @@ static void mptcp_parse_option(const struct sk_buff *skb, mp_opt->dss = 1; mp_opt->use_map = 1; mp_opt->mpc_map = 1; + mp_opt->use_ack = 0; mp_opt->data_len = get_unaligned_be16(ptr); ptr += 2; } From 52a33dbeacc826f532e543c8ded66e63f9f572d6 Mon Sep 17 00:00:00 2001 From: Johannes Berg Date: Fri, 24 Nov 2023 17:25:24 +0100 Subject: [PATCH 005/288] debugfs: fix automount d_fsdata usage [ Upstream commit 0ed04a1847a10297595ac24dc7d46b35fb35f90a ] debugfs_create_automount() stores a function pointer in d_fsdata, but since commit 7c8d469877b1 ("debugfs: add support for more elaborate ->d_fsdata") debugfs_release_dentry() will free it, now conditionally on DEBUGFS_FSDATA_IS_REAL_FOPS_BIT, but that's not set for the function pointer in automount. As a result, removing an automount dentry would attempt to free the function pointer. Luckily, the only user of this (tracing) never removes it. Nevertheless, it's safer if we just handle the fsdata in one way, namely either DEBUGFS_FSDATA_IS_REAL_FOPS_BIT or allocated. Thus, change the automount to allocate it, and use the real_fops in the data to indicate whether or not automount is filled, rather than adding a type tag. At least for now this isn't actually needed, but the next changes will require it. Also check in debugfs_file_get() that it gets only called on regular files, just to make things clearer. Acked-by: Greg Kroah-Hartman Signed-off-by: Johannes Berg Signed-off-by: Sasha Levin --- fs/debugfs/file.c | 8 ++++++++ fs/debugfs/inode.c | 27 ++++++++++++++++++++------- fs/debugfs/internal.h | 10 ++++++++-- 3 files changed, 36 insertions(+), 9 deletions(-) diff --git a/fs/debugfs/file.c b/fs/debugfs/file.c index 42bab9270e7d..9c0aadedfbff 100644 --- a/fs/debugfs/file.c +++ b/fs/debugfs/file.c @@ -84,6 +84,14 @@ int debugfs_file_get(struct dentry *dentry) struct debugfs_fsdata *fsd; void *d_fsd; + /* + * This could only happen if some debugfs user erroneously calls + * debugfs_file_get() on a dentry that isn't even a file, let + * them know about it. + */ + if (WARN_ON(!d_is_reg(dentry))) + return -EINVAL; + d_fsd = READ_ONCE(dentry->d_fsdata); if (!((unsigned long)d_fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT)) { fsd = d_fsd; diff --git a/fs/debugfs/inode.c b/fs/debugfs/inode.c index f47f0a7d2c3b..d04930c199cb 100644 --- a/fs/debugfs/inode.c +++ b/fs/debugfs/inode.c @@ -210,17 +210,19 @@ static const struct super_operations debugfs_super_operations = { static void debugfs_release_dentry(struct dentry *dentry) { - void *fsd = dentry->d_fsdata; + struct debugfs_fsdata *fsd = dentry->d_fsdata; - if (!((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT)) - kfree(dentry->d_fsdata); + if ((unsigned long)fsd & DEBUGFS_FSDATA_IS_REAL_FOPS_BIT) + return; + + kfree(fsd); } static struct vfsmount *debugfs_automount(struct path *path) { - debugfs_automount_t f; - f = (debugfs_automount_t)path->dentry->d_fsdata; - return f(path->dentry, d_inode(path->dentry)->i_private); + struct debugfs_fsdata *fsd = path->dentry->d_fsdata; + + return fsd->automount(path->dentry, d_inode(path->dentry)->i_private); } static const struct dentry_operations debugfs_dops = { @@ -598,13 +600,23 @@ struct dentry *debugfs_create_automount(const char *name, void *data) { struct dentry *dentry = start_creating(name, parent); + struct debugfs_fsdata *fsd; struct inode *inode; if (IS_ERR(dentry)) return dentry; + fsd = kzalloc(sizeof(*fsd), GFP_KERNEL); + if (!fsd) { + failed_creating(dentry); + return ERR_PTR(-ENOMEM); + } + + fsd->automount = f; + if (!(debugfs_allow & DEBUGFS_ALLOW_API)) { failed_creating(dentry); + kfree(fsd); return ERR_PTR(-EPERM); } @@ -612,13 +624,14 @@ struct dentry *debugfs_create_automount(const char *name, if (unlikely(!inode)) { pr_err("out of free dentries, can not create automount '%s'\n", name); + kfree(fsd); return failed_creating(dentry); } make_empty_dir_inode(inode); inode->i_flags |= S_AUTOMOUNT; inode->i_private = data; - dentry->d_fsdata = (void *)f; + dentry->d_fsdata = fsd; /* directory inodes start off with i_nlink == 2 (for "." entry) */ inc_nlink(inode); d_instantiate(dentry, inode); diff --git a/fs/debugfs/internal.h b/fs/debugfs/internal.h index 92af8ae31313..f7c489b5a368 100644 --- a/fs/debugfs/internal.h +++ b/fs/debugfs/internal.h @@ -17,8 +17,14 @@ extern const struct file_operations debugfs_full_proxy_file_operations; struct debugfs_fsdata { const struct file_operations *real_fops; - refcount_t active_users; - struct completion active_users_drained; + union { + /* automount_fn is used when real_fops is NULL */ + debugfs_automount_t automount; + struct { + refcount_t active_users; + struct completion active_users_drained; + }; + }; }; /* From 974f127fcf6552ecd5b76c36c7b107e77b2febf9 Mon Sep 17 00:00:00 2001 From: Lu Yao Date: Thu, 23 Nov 2023 09:22:34 +0800 Subject: [PATCH 006/288] drm/amdgpu: Fix cat debugfs amdgpu_regs_didt causes kernel null pointer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 2161e09cd05a50d80736fe397145340d2e8f6c05 ] For 'AMDGPU_FAMILY_SI' family cards, in 'si_common_early_init' func, init 'didt_rreg' and 'didt_wreg' to 'NULL'. But in func 'amdgpu_debugfs_regs_didt_read/write', using 'RREG32_DIDT' 'WREG32_DIDT' lacks of relevant judgment. And other 'amdgpu_ip_block_version' that use these two definitions won't be added for 'AMDGPU_FAMILY_SI'. So, add null pointer judgment before calling. Reviewed-by: Christian König Signed-off-by: Lu Yao Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 48df32dd352e..3e573077368b 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -459,6 +459,9 @@ static ssize_t amdgpu_debugfs_regs_didt_read(struct file *f, char __user *buf, if (size & 0x3 || *pos & 0x3) return -EINVAL; + if (!adev->didt_rreg) + return -EOPNOTSUPP; + r = pm_runtime_get_sync(adev_to_drm(adev)->dev); if (r < 0) { pm_runtime_put_autosuspend(adev_to_drm(adev)->dev); @@ -518,6 +521,9 @@ static ssize_t amdgpu_debugfs_regs_didt_write(struct file *f, const char __user if (size & 0x3 || *pos & 0x3) return -EINVAL; + if (!adev->didt_wreg) + return -EOPNOTSUPP; + r = pm_runtime_get_sync(adev_to_drm(adev)->dev); if (r < 0) { pm_runtime_put_autosuspend(adev_to_drm(adev)->dev); From 06a33eec1dc28dfbcd62c1ff94a3229f3ee265bc Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Tue, 28 Nov 2023 09:36:04 -0800 Subject: [PATCH 007/288] nvme-core: check for too small lba shift [ Upstream commit 74fbc88e161424b3b96a22b23a8e3e1edab9d05c ] The block layer doesn't support logical block sizes smaller than 512 bytes. The nvme spec doesn't support that small either, but the driver isn't checking to make sure the device responded with usable data. Failing to catch this will result in a kernel bug, either from a division by zero when stacking, or a zero length bio. Reviewed-by: Jens Axboe Signed-off-by: Keith Busch Signed-off-by: Sasha Levin --- drivers/nvme/host/core.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/nvme/host/core.c b/drivers/nvme/host/core.c index 07c41a149328..30a642c8f537 100644 --- a/drivers/nvme/host/core.c +++ b/drivers/nvme/host/core.c @@ -2071,9 +2071,10 @@ static void nvme_update_disk_info(struct gendisk *disk, /* * The block layer can't support LBA sizes larger than the page size - * yet, so catch this early and don't allow block I/O. + * or smaller than a sector size yet, so catch this early and don't + * allow block I/O. */ - if (ns->lba_shift > PAGE_SHIFT) { + if (ns->lba_shift > PAGE_SHIFT || ns->lba_shift < SECTOR_SHIFT) { capacity = 0; bs = (1 << 9); } From c78083013bef4e7649e89488c34a79f15571c19b Mon Sep 17 00:00:00 2001 From: Charles Keepax Date: Mon, 13 Nov 2023 15:59:16 +0000 Subject: [PATCH 008/288] ASoC: wm8974: Correct boost mixer inputs [ Upstream commit 37e6fd0cebf0b9f71afb38fd95b10408799d1f0b ] Bit 6 of INPPGA (INPPGAMUTE) does not control the Aux path, it controls the input PGA path, as can been seen from Figure 8 Input Boost Stage in the datasheet. Update the naming of things in the driver to match this and update the routing to also reflect this. Signed-off-by: Charles Keepax Link: https://lore.kernel.org/r/20231113155916.1741027-1-ckeepax@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/wm8974.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/wm8974.c b/sound/soc/codecs/wm8974.c index c86231dfcf4f..600e93d61a90 100644 --- a/sound/soc/codecs/wm8974.c +++ b/sound/soc/codecs/wm8974.c @@ -186,7 +186,7 @@ SOC_DAPM_SINGLE("PCM Playback Switch", WM8974_MONOMIX, 0, 1, 0), /* Boost mixer */ static const struct snd_kcontrol_new wm8974_boost_mixer[] = { -SOC_DAPM_SINGLE("Aux Switch", WM8974_INPPGA, 6, 1, 1), +SOC_DAPM_SINGLE("PGA Switch", WM8974_INPPGA, 6, 1, 1), }; /* Input PGA */ @@ -246,8 +246,8 @@ static const struct snd_soc_dapm_route wm8974_dapm_routes[] = { /* Boost Mixer */ {"ADC", NULL, "Boost Mixer"}, - {"Boost Mixer", "Aux Switch", "Aux Input"}, - {"Boost Mixer", NULL, "Input PGA"}, + {"Boost Mixer", NULL, "Aux Input"}, + {"Boost Mixer", "PGA Switch", "Input PGA"}, {"Boost Mixer", NULL, "MICP"}, /* Input PGA */ From 9c89777c7dcc5b119fd150afb80ab0896b995c9f Mon Sep 17 00:00:00 2001 From: Kamil Duljas Date: Thu, 16 Nov 2023 13:51:50 +0100 Subject: [PATCH 009/288] ASoC: Intel: Skylake: Fix mem leak in few functions MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit d5c65be34df73fa01ed05611aafb73b440d89e29 ] The resources should be freed when function return error. Signed-off-by: Kamil Duljas Reviewed-by: Amadeusz Sławiński Link: https://lore.kernel.org/r/20231116125150.1436-1-kamil.duljas@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/intel/skylake/skl-pcm.c | 4 +++- sound/soc/intel/skylake/skl-sst-ipc.c | 4 +++- 2 files changed, 6 insertions(+), 2 deletions(-) diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index b531d9dfc2d6..c7e76111f68b 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -251,8 +251,10 @@ static int skl_pcm_open(struct snd_pcm_substream *substream, snd_pcm_set_sync(substream); mconfig = skl_tplg_fe_get_cpr_module(dai, substream->stream); - if (!mconfig) + if (!mconfig) { + kfree(dma_params); return -EINVAL; + } skl_tplg_d0i3_get(skl, mconfig->d0i3_caps); diff --git a/sound/soc/intel/skylake/skl-sst-ipc.c b/sound/soc/intel/skylake/skl-sst-ipc.c index 7a425271b08b..fd9624ad5f72 100644 --- a/sound/soc/intel/skylake/skl-sst-ipc.c +++ b/sound/soc/intel/skylake/skl-sst-ipc.c @@ -1003,8 +1003,10 @@ int skl_ipc_get_large_config(struct sst_generic_ipc *ipc, reply.size = (reply.header >> 32) & IPC_DATA_OFFSET_SZ_MASK; buf = krealloc(reply.data, reply.size, GFP_KERNEL); - if (!buf) + if (!buf) { + kfree(reply.data); return -ENOMEM; + } *payload = buf; *bytes = reply.size; From 1e31b47b2e570d2279e6d2288b06e8dc59d05aa0 Mon Sep 17 00:00:00 2001 From: David Lin Date: Fri, 17 Nov 2023 12:30:12 +0800 Subject: [PATCH 010/288] ASoC: nau8822: Fix incorrect type in assignment and cast to restricted __be16 [ Upstream commit c1501f2597dd08601acd42256a4b0a0fc36bf302 ] This issue is reproduced when W=1 build in compiler gcc-12. The following are sparse warnings: sound/soc/codecs/nau8822.c:199:25: sparse: sparse: incorrect type in assignment sound/soc/codecs/nau8822.c:199:25: sparse: expected unsigned short sound/soc/codecs/nau8822.c:199:25: sparse: got restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 sound/soc/codecs/nau8822.c:235:25: sparse: sparse: cast to restricted __be16 Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202311122320.T1opZVkP-lkp@intel.com/ Signed-off-by: David Lin Link: https://lore.kernel.org/r/20231117043011.1747594-1-CTLIN0@nuvoton.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/nau8822.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/sound/soc/codecs/nau8822.c b/sound/soc/codecs/nau8822.c index d831959d8ff7..4ce15cd9ed02 100644 --- a/sound/soc/codecs/nau8822.c +++ b/sound/soc/codecs/nau8822.c @@ -184,6 +184,7 @@ static int nau8822_eq_get(struct snd_kcontrol *kcontrol, struct soc_bytes_ext *params = (void *)kcontrol->private_value; int i, reg; u16 reg_val, *val; + __be16 tmp; val = (u16 *)ucontrol->value.bytes.data; reg = NAU8822_REG_EQ1; @@ -192,8 +193,8 @@ static int nau8822_eq_get(struct snd_kcontrol *kcontrol, /* conversion of 16-bit integers between native CPU format * and big endian format */ - reg_val = cpu_to_be16(reg_val); - memcpy(val + i, ®_val, sizeof(reg_val)); + tmp = cpu_to_be16(reg_val); + memcpy(val + i, &tmp, sizeof(tmp)); } return 0; @@ -216,6 +217,7 @@ static int nau8822_eq_put(struct snd_kcontrol *kcontrol, void *data; u16 *val, value; int i, reg, ret; + __be16 *tmp; data = kmemdup(ucontrol->value.bytes.data, params->max, GFP_KERNEL | GFP_DMA); @@ -228,7 +230,8 @@ static int nau8822_eq_put(struct snd_kcontrol *kcontrol, /* conversion of 16-bit integers between native CPU format * and big endian format */ - value = be16_to_cpu(*(val + i)); + tmp = (__be16 *)(val + i); + value = be16_to_cpup(tmp); ret = snd_soc_component_write(component, reg + i, value); if (ret) { dev_err(component->dev, From 304529d564497ceb1ffc87b2571b00052299a939 Mon Sep 17 00:00:00 2001 From: Kamil Duljas Date: Thu, 16 Nov 2023 23:41:13 +0100 Subject: [PATCH 011/288] ASoC: Intel: Skylake: mem leak in skl register function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit f8ba14b780273fd290ddf7ee0d7d7decb44cc365 ] skl_platform_register() uses krealloc. When krealloc is fail, then previous memory is not freed. The leak is also when soc component registration failed. Signed-off-by: Kamil Duljas Reviewed-by: Amadeusz Sławiński Link: https://lore.kernel.org/r/20231116224112.2209-2-kamil.duljas@gmail.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/intel/skylake/skl-pcm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/sound/soc/intel/skylake/skl-pcm.c b/sound/soc/intel/skylake/skl-pcm.c index c7e76111f68b..935c871abdaa 100644 --- a/sound/soc/intel/skylake/skl-pcm.c +++ b/sound/soc/intel/skylake/skl-pcm.c @@ -1477,6 +1477,7 @@ int skl_platform_register(struct device *dev) dais = krealloc(skl->dais, sizeof(skl_fe_dai) + sizeof(skl_platform_dai), GFP_KERNEL); if (!dais) { + kfree(skl->dais); ret = -ENOMEM; goto err; } @@ -1489,8 +1490,10 @@ int skl_platform_register(struct device *dev) ret = devm_snd_soc_register_component(dev, &skl_component, skl->dais, num_dais); - if (ret) + if (ret) { + kfree(skl->dais); dev_err(dev, "soc component registration failed %d\n", ret); + } err: return ret; } From 921ff9f2b19e389b89abfcee2b6a564e891207c8 Mon Sep 17 00:00:00 2001 From: Maciej Strozek Date: Fri, 17 Nov 2023 14:13:38 +0000 Subject: [PATCH 012/288] ASoC: cs43130: Fix the position of const qualifier [ Upstream commit e7f289a59e76a5890a57bc27b198f69f175f75d9 ] Signed-off-by: Maciej Strozek Acked-by: Charles Keepax Link: https://lore.kernel.org/r/20231117141344.64320-2-mstrozek@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/cs43130.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index 8f70dee95878..285806868c40 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -1683,7 +1683,7 @@ static ssize_t cs43130_show_dc_r(struct device *dev, return cs43130_show_dc(dev, buf, HP_RIGHT); } -static u16 const cs43130_ac_freq[CS43130_AC_FREQ] = { +static const u16 cs43130_ac_freq[CS43130_AC_FREQ] = { 24, 43, 93, @@ -2364,7 +2364,7 @@ static const struct regmap_config cs43130_regmap = { .use_single_write = true, }; -static u16 const cs43130_dc_threshold[CS43130_DC_THRESHOLD] = { +static const u16 cs43130_dc_threshold[CS43130_DC_THRESHOLD] = { 50, 120, }; From 8b50b177bf9850b842ca229691ec5cedd85d22a3 Mon Sep 17 00:00:00 2001 From: Maciej Strozek Date: Fri, 17 Nov 2023 14:13:39 +0000 Subject: [PATCH 013/288] ASoC: cs43130: Fix incorrect frame delay configuration [ Upstream commit aa7e8e5e4011571022dc06e4d7a2f108feb53d1a ] Signed-off-by: Maciej Strozek Acked-by: Charles Keepax Link: https://lore.kernel.org/r/20231117141344.64320-3-mstrozek@opensource.cirrus.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/cs43130.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/cs43130.c b/sound/soc/codecs/cs43130.c index 285806868c40..02fb9317b697 100644 --- a/sound/soc/codecs/cs43130.c +++ b/sound/soc/codecs/cs43130.c @@ -578,7 +578,7 @@ static int cs43130_set_sp_fmt(int dai_id, unsigned int bitwidth_sclk, break; case SND_SOC_DAIFMT_LEFT_J: hi_size = bitwidth_sclk; - frm_delay = 2; + frm_delay = 0; frm_phase = 1; break; case SND_SOC_DAIFMT_DSP_A: From ffe13302b8fd486f80c98019bdcb7f3e512d0eda Mon Sep 17 00:00:00 2001 From: Shuming Fan Date: Wed, 22 Nov 2023 18:01:23 +0800 Subject: [PATCH 014/288] ASoC: rt5650: add mutex to avoid the jack detection failure [ Upstream commit cdba4301adda7c60a2064bf808e48fccd352aaa9 ] This patch adds the jd_mutex to protect the jack detection control flow. And only the headset type could check the button status. Signed-off-by: Shuming Fan Link: https://lore.kernel.org/r/20231122100123.2831753-1-shumingf@realtek.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/rt5645.c | 10 +++++++++- 1 file changed, 9 insertions(+), 1 deletion(-) diff --git a/sound/soc/codecs/rt5645.c b/sound/soc/codecs/rt5645.c index 99d91bfb8812..7dc80183921e 100644 --- a/sound/soc/codecs/rt5645.c +++ b/sound/soc/codecs/rt5645.c @@ -421,6 +421,7 @@ struct rt5645_priv { struct regulator_bulk_data supplies[ARRAY_SIZE(rt5645_supply_names)]; struct rt5645_eq_param_s *eq_param; struct timer_list btn_check_timer; + struct mutex jd_mutex; int codec_type; int sysclk; @@ -3179,6 +3180,8 @@ static int rt5645_jack_detect(struct snd_soc_component *component, int jack_inse rt5645_enable_push_button_irq(component, true); } } else { + if (rt5645->en_button_func) + rt5645_enable_push_button_irq(component, false); snd_soc_dapm_disable_pin(dapm, "Mic Det Power"); snd_soc_dapm_sync(dapm); rt5645->jack_type = SND_JACK_HEADPHONE; @@ -3259,6 +3262,8 @@ static void rt5645_jack_detect_work(struct work_struct *work) if (!rt5645->component) return; + mutex_lock(&rt5645->jd_mutex); + switch (rt5645->pdata.jd_mode) { case 0: /* Not using rt5645 JD */ if (rt5645->gpiod_hp_det) { @@ -3283,7 +3288,7 @@ static void rt5645_jack_detect_work(struct work_struct *work) if (!val && (rt5645->jack_type == 0)) { /* jack in */ report = rt5645_jack_detect(rt5645->component, 1); - } else if (!val && rt5645->jack_type != 0) { + } else if (!val && rt5645->jack_type == SND_JACK_HEADSET) { /* for push button and jack out */ btn_type = 0; if (snd_soc_component_read(rt5645->component, RT5645_INT_IRQ_ST) & 0x4) { @@ -3339,6 +3344,8 @@ static void rt5645_jack_detect_work(struct work_struct *work) rt5645_jack_detect(rt5645->component, 0); } + mutex_unlock(&rt5645->jd_mutex); + snd_soc_jack_report(rt5645->hp_jack, report, SND_JACK_HEADPHONE); snd_soc_jack_report(rt5645->mic_jack, report, SND_JACK_MICROPHONE); if (rt5645->en_button_func) @@ -4062,6 +4069,7 @@ static int rt5645_i2c_probe(struct i2c_client *i2c, } timer_setup(&rt5645->btn_check_timer, rt5645_btn_check_callback, 0); + mutex_init(&rt5645->jd_mutex); INIT_DELAYED_WORK(&rt5645->jack_detect_work, rt5645_jack_detect_work); INIT_DELAYED_WORK(&rt5645->rcclock_work, rt5645_rcclock_work); From 44ad1b9eb37f6f98cc21eaba09ba4028b4e67383 Mon Sep 17 00:00:00 2001 From: Dave Airlie Date: Thu, 30 Nov 2023 11:08:52 +1000 Subject: [PATCH 015/288] nouveau/tu102: flush all pdbs on vmm flush [ Upstream commit cb9c919364653eeafb49e7ff5cd32f1ad64063ac ] This is a hack around a bug exposed with the GSP code, I'm not sure what is happening exactly, but it appears some of our flushes don't result in proper tlb invalidation for out BAR2 and we get a BAR2 fault from GSP and it all dies. Signed-off-by: Dave Airlie Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20231130010852.4034774-1-airlied@gmail.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c index b1294d0076c0..72449bf613bf 100644 --- a/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c +++ b/drivers/gpu/drm/nouveau/nvkm/subdev/mmu/vmmtu102.c @@ -32,7 +32,7 @@ tu102_vmm_flush(struct nvkm_vmm *vmm, int depth) type |= 0x00000001; /* PAGE_ALL */ if (atomic_read(&vmm->engref[NVKM_SUBDEV_BAR])) - type |= 0x00000004; /* HUB_ONLY */ + type |= 0x00000006; /* HUB_ONLY | ALL PDB (hack) */ mutex_lock(&subdev->mutex); From 1059aa41c5a84abfab4cc7371d6b5ff2b30b6c2d Mon Sep 17 00:00:00 2001 From: Thinh Tran Date: Thu, 30 Nov 2023 18:19:11 -0600 Subject: [PATCH 016/288] net/tg3: fix race condition in tg3_reset_task() [ Upstream commit 16b55b1f2269962fb6b5154b8bf43f37c9a96637 ] When an EEH error is encountered by a PCI adapter, the EEH driver modifies the PCI channel's state as shown below: enum { /* I/O channel is in normal state */ pci_channel_io_normal = (__force pci_channel_state_t) 1, /* I/O to channel is blocked */ pci_channel_io_frozen = (__force pci_channel_state_t) 2, /* PCI card is dead */ pci_channel_io_perm_failure = (__force pci_channel_state_t) 3, }; If the same EEH error then causes the tg3 driver's transmit timeout logic to execute, the tg3_tx_timeout() function schedules a reset task via tg3_reset_task_schedule(), which may cause a race condition between the tg3 and EEH driver as both attempt to recover the HW via a reset action. EEH driver gets error event --> eeh_set_channel_state() and set device to one of error state above scheduler: tg3_reset_task() get returned error from tg3_init_hw() --> dev_close() shuts down the interface tg3_io_slot_reset() and tg3_io_resume() fail to reset/resume the device To resolve this issue, we avoid the race condition by checking the PCI channel state in the tg3_reset_task() function and skip the tg3 driver initiated reset when the PCI channel is not in the normal state. (The driver has no access to tg3 device registers at this point and cannot even complete the reset task successfully without external assistance.) We'll leave the reset procedure to be managed by the EEH driver which calls the tg3_io_error_detected(), tg3_io_slot_reset() and tg3_io_resume() functions as appropriate. Adding the same checking in tg3_dump_state() to avoid dumping all device registers when the PCI channel is not in the normal state. Signed-off-by: Thinh Tran Tested-by: Venkata Sai Duggi Reviewed-by: David Christensen Reviewed-by: Michael Chan Link: https://lore.kernel.org/r/20231201001911.656-1-thinhtr@linux.vnet.ibm.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/broadcom/tg3.c | 11 ++++++++++- 1 file changed, 10 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/broadcom/tg3.c b/drivers/net/ethernet/broadcom/tg3.c index b010f28b0abf..fe2c9b110e60 100644 --- a/drivers/net/ethernet/broadcom/tg3.c +++ b/drivers/net/ethernet/broadcom/tg3.c @@ -6454,6 +6454,14 @@ static void tg3_dump_state(struct tg3 *tp) int i; u32 *regs; + /* If it is a PCI error, all registers will be 0xffff, + * we don't dump them out, just report the error and return + */ + if (tp->pdev->error_state != pci_channel_io_normal) { + netdev_err(tp->dev, "PCI channel ERROR!\n"); + return; + } + regs = kzalloc(TG3_REG_BLK_SIZE, GFP_ATOMIC); if (!regs) return; @@ -11195,7 +11203,8 @@ static void tg3_reset_task(struct work_struct *work) rtnl_lock(); tg3_full_lock(tp, 0); - if (tp->pcierr_recovery || !netif_running(tp->dev)) { + if (tp->pcierr_recovery || !netif_running(tp->dev) || + tp->pdev->error_state != pci_channel_io_normal) { tg3_flag_clear(tp, RESET_TASK_PENDING); tg3_full_unlock(tp); rtnl_unlock(); From a8b1ddeeacd909001c6302a6482eab327cf7e04a Mon Sep 17 00:00:00 2001 From: David Rau Date: Fri, 1 Dec 2023 12:29:33 +0800 Subject: [PATCH 017/288] ASoC: da7219: Support low DC impedance headset [ Upstream commit 5f44de697383fcc9a9a1a78f99e09d1838704b90 ] Change the default MIC detection impedance threshold to 200ohm to support low mic DC impedance headset. Signed-off-by: David Rau Link: https://lore.kernel.org/r/20231201042933.26392-1-David.Rau.opensource@dm.renesas.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/da7219-aad.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/soc/codecs/da7219-aad.c b/sound/soc/codecs/da7219-aad.c index b316d613a709..b6030709b6b6 100644 --- a/sound/soc/codecs/da7219-aad.c +++ b/sound/soc/codecs/da7219-aad.c @@ -654,7 +654,7 @@ static struct da7219_aad_pdata *da7219_aad_fw_to_pdata(struct device *dev) aad_pdata->mic_det_thr = da7219_aad_fw_mic_det_thr(dev, fw_val32); else - aad_pdata->mic_det_thr = DA7219_AAD_MIC_DET_THR_500_OHMS; + aad_pdata->mic_det_thr = DA7219_AAD_MIC_DET_THR_200_OHMS; if (fwnode_property_read_u32(aad_np, "dlg,jack-ins-deb", &fw_val32) >= 0) aad_pdata->jack_ins_deb = From fb2f34d939929e7ba73eac4e0aa6cfb51cab141a Mon Sep 17 00:00:00 2001 From: Keith Busch Date: Mon, 30 Oct 2023 08:13:09 -0700 Subject: [PATCH 018/288] nvme: introduce helper function to get ctrl state [ Upstream commit 5c687c287c46fadb14644091823298875a5216aa ] The controller state is typically written by another CPU, so reading it should ensure no optimizations are taken. This is a repeated pattern in the driver, so start with adding a convenience function that returns the controller state with READ_ONCE(). Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch Signed-off-by: Sasha Levin --- drivers/nvme/host/nvme.h | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/nvme/host/nvme.h b/drivers/nvme/host/nvme.h index c3e4d9b6f9c0..1e56fe8e8157 100644 --- a/drivers/nvme/host/nvme.h +++ b/drivers/nvme/host/nvme.h @@ -354,6 +354,11 @@ struct nvme_ctrl { struct nvme_fault_inject fault_inject; }; +static inline enum nvme_ctrl_state nvme_ctrl_state(struct nvme_ctrl *ctrl) +{ + return READ_ONCE(ctrl->state); +} + enum nvme_iopolicy { NVME_IOPOLICY_NUMA, NVME_IOPOLICY_RR, From 0fc35b0d9f943dbddfb81cb716fe1e3d9fbe3a2d Mon Sep 17 00:00:00 2001 From: Xiang Yang Date: Sat, 12 Aug 2023 14:27:48 +0800 Subject: [PATCH 019/288] drm/exynos: fix a potential error pointer dereference [ Upstream commit 73bf1c9ae6c054c53b8e84452c5e46f86dd28246 ] Smatch reports the warning below: drivers/gpu/drm/exynos/exynos_hdmi.c:1864 hdmi_bind() error: 'crtc' dereferencing possible ERR_PTR() The return value of exynos_drm_crtc_get_by_type maybe ERR_PTR(-ENODEV), which can not be used directly. Fix this by checking the return value before using it. Signed-off-by: Xiang Yang Signed-off-by: Inki Dae Signed-off-by: Sasha Levin --- drivers/gpu/drm/exynos/exynos_hdmi.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c index dc01c188c0e0..981bffacda24 100644 --- a/drivers/gpu/drm/exynos/exynos_hdmi.c +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c @@ -1849,6 +1849,8 @@ static int hdmi_bind(struct device *dev, struct device *master, void *data) return ret; crtc = exynos_drm_crtc_get_by_type(drm_dev, EXYNOS_DISPLAY_TYPE_HDMI); + if (IS_ERR(crtc)) + return PTR_ERR(crtc); crtc->pipe_clk = &hdata->phy_clk; ret = hdmi_create_connector(encoder); From 05644e6365419c415d0c057813b7fb5f140ddbea Mon Sep 17 00:00:00 2001 From: Inki Dae Date: Wed, 1 Nov 2023 18:36:51 +0900 Subject: [PATCH 020/288] drm/exynos: fix a wrong error checking [ Upstream commit 8d1b7809684c688005706125b804e1f9792d2b1b ] Fix a wrong error checking in exynos_drm_dma.c module. In the exynos_drm_register_dma function, both arm_iommu_create_mapping() and iommu_get_domain_for_dev() functions are expected to return NULL as an error. However, the error checking is performed using the statement if(IS_ERR(mapping)), which doesn't provide a suitable error value. So check if 'mapping' is NULL, and if it is, return -ENODEV. This issue[1] was reported by Dan. Changelog v1: - fix build warning. [1] https://lore.kernel.org/all/33e52277-1349-472b-a55b-ab5c3462bfcf@moroto.mountain/ Reported-by : Dan Carpenter Signed-off-by: Inki Dae Signed-off-by: Sasha Levin --- drivers/gpu/drm/exynos/exynos_drm_dma.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/gpu/drm/exynos/exynos_drm_dma.c b/drivers/gpu/drm/exynos/exynos_drm_dma.c index bf33c3084cb4..6b4d6da3b1f4 100644 --- a/drivers/gpu/drm/exynos/exynos_drm_dma.c +++ b/drivers/gpu/drm/exynos/exynos_drm_dma.c @@ -108,18 +108,16 @@ int exynos_drm_register_dma(struct drm_device *drm, struct device *dev, return 0; if (!priv->mapping) { - void *mapping; + void *mapping = NULL; if (IS_ENABLED(CONFIG_ARM_DMA_USE_IOMMU)) mapping = arm_iommu_create_mapping(&platform_bus_type, EXYNOS_DEV_ADDR_START, EXYNOS_DEV_ADDR_SIZE); else if (IS_ENABLED(CONFIG_IOMMU_DMA)) mapping = iommu_get_domain_for_dev(priv->dma_dev); - else - mapping = ERR_PTR(-ENODEV); - if (IS_ERR(mapping)) - return PTR_ERR(mapping); + if (!mapping) + return -ENODEV; priv->mapping = mapping; } From 656d684109c686a2b6d593cee20f8a863de5d124 Mon Sep 17 00:00:00 2001 From: Weihao Li Date: Tue, 31 Oct 2023 19:18:16 +0800 Subject: [PATCH 021/288] clk: rockchip: rk3128: Fix HCLK_OTG gate register [ Upstream commit c6c5a5580dcb6631aa6369dabe12ef3ce784d1d2 ] The HCLK_OTG gate control is in CRU_CLKGATE5_CON, not CRU_CLKGATE3_CON. Signed-off-by: Weihao Li Link: https://lore.kernel.org/r/20231031111816.8777-1-cn.liweihao@gmail.com Signed-off-by: Heiko Stuebner Signed-off-by: Sasha Levin --- drivers/clk/rockchip/clk-rk3128.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/rockchip/clk-rk3128.c b/drivers/clk/rockchip/clk-rk3128.c index 4b1122e98e16..ddfe1c402e80 100644 --- a/drivers/clk/rockchip/clk-rk3128.c +++ b/drivers/clk/rockchip/clk-rk3128.c @@ -489,7 +489,7 @@ static struct rockchip_clk_branch common_clk_branches[] __initdata = { GATE(HCLK_I2S_2CH, "hclk_i2s_2ch", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 2, GFLAGS), GATE(0, "hclk_usb_peri", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 13, GFLAGS), GATE(HCLK_HOST2, "hclk_host2", "hclk_peri", 0, RK2928_CLKGATE_CON(7), 3, GFLAGS), - GATE(HCLK_OTG, "hclk_otg", "hclk_peri", 0, RK2928_CLKGATE_CON(3), 13, GFLAGS), + GATE(HCLK_OTG, "hclk_otg", "hclk_peri", 0, RK2928_CLKGATE_CON(5), 13, GFLAGS), GATE(0, "hclk_peri_ahb", "hclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(9), 14, GFLAGS), GATE(HCLK_SPDIF, "hclk_spdif", "hclk_peri", 0, RK2928_CLKGATE_CON(10), 9, GFLAGS), GATE(HCLK_TSP, "hclk_tsp", "hclk_peri", 0, RK2928_CLKGATE_CON(10), 12, GFLAGS), From 956b740f3e464c1511a237f4df129f00cb241f6c Mon Sep 17 00:00:00 2001 From: Zhang Yi Date: Wed, 29 Nov 2023 19:47:39 +0800 Subject: [PATCH 022/288] jbd2: correct the printing of write_flags in jbd2_write_superblock() [ Upstream commit 85559227211020b270728104c3b89918f7af27ac ] The write_flags print in the trace of jbd2_write_superblock() is not real, so move the modification before the trace. Signed-off-by: Zhang Yi Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231129114740.2686201-1-yi.zhang@huaweicloud.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin --- fs/jbd2/journal.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/fs/jbd2/journal.c b/fs/jbd2/journal.c index fee325d62bfd..effd837b8c1f 100644 --- a/fs/jbd2/journal.c +++ b/fs/jbd2/journal.c @@ -1568,9 +1568,11 @@ static int jbd2_write_superblock(journal_t *journal, int write_flags) return -EIO; } - trace_jbd2_write_superblock(journal, write_flags); if (!(journal->j_flags & JBD2_BARRIER)) write_flags &= ~(REQ_FUA | REQ_PREFLUSH); + + trace_jbd2_write_superblock(journal, write_flags); + if (buffer_write_io_error(bh)) { /* * Oh, dear. A previous attempt to write the journal From 3887ba719800d930793319eb47bf3e85200295fa Mon Sep 17 00:00:00 2001 From: Ziqi Zhao Date: Fri, 21 Jul 2023 09:14:46 -0700 Subject: [PATCH 023/288] drm/crtc: Fix uninit-value bug in drm_mode_setcrtc [ Upstream commit 3823119b9c2b5f9e9b760336f75bc989b805cde6 ] The connector_set contains uninitialized values when allocated with kmalloc_array. However, in the "out" branch, the logic assumes that any element in connector_set would be equal to NULL if failed to initialize, which causes the bug reported by Syzbot. The fix is to use an extra variable to keep track of how many connectors are initialized indeed, and use that variable to decrease any refcounts in the "out" branch. Reported-by: syzbot+4fad2e57beb6397ab2fc@syzkaller.appspotmail.com Signed-off-by: Ziqi Zhao Reported-and-tested-by: syzbot+4fad2e57beb6397ab2fc@syzkaller.appspotmail.com Tested-by: Harshit Mogalapalli Link: https://lore.kernel.org/r/20230721161446.8602-1-astrajoan@yahoo.com Signed-off-by: Maxime Ripard Signed-off-by: Sasha Levin --- drivers/gpu/drm/drm_crtc.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index aecdd7ea26dc..b3c0a9ea8c6f 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -562,8 +562,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_mode_set set; uint32_t __user *set_connectors_ptr; struct drm_modeset_acquire_ctx ctx; - int ret; - int i; + int ret, i, num_connectors; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; @@ -701,6 +700,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, goto out; } + num_connectors = 0; for (i = 0; i < crtc_req->count_connectors; i++) { connector_set[i] = NULL; set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr; @@ -721,6 +721,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, connector->name); connector_set[i] = connector; + num_connectors++; } } @@ -729,7 +730,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, set.y = crtc_req->y; set.mode = mode; set.connectors = connector_set; - set.num_connectors = crtc_req->count_connectors; + set.num_connectors = num_connectors; set.fb = fb; if (drm_drv_uses_atomic_modeset(dev)) @@ -742,7 +743,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, drm_framebuffer_put(fb); if (connector_set) { - for (i = 0; i < crtc_req->count_connectors; i++) { + for (i = 0; i < num_connectors; i++) { if (connector_set[i]) drm_connector_put(connector_set[i]); } From cd94f81f7752126b55ea5d044edd20735991f90c Mon Sep 17 00:00:00 2001 From: Judy Hsiao Date: Wed, 6 Dec 2023 03:38:33 +0000 Subject: [PATCH 024/288] neighbour: Don't let neigh_forced_gc() disable preemption for long [ Upstream commit e5dc5afff62f3e97e86c3643ec9fcad23de4f2d3 ] We are seeing cases where neigh_cleanup_and_release() is called by neigh_forced_gc() many times in a row with preemption turned off. When running on a low powered CPU at a low CPU frequency, this has been measured to keep preemption off for ~10 ms. That's not great on a system with HZ=1000 which expects tasks to be able to schedule in with ~1ms latency. Suggested-by: Douglas Anderson Signed-off-by: Judy Hsiao Reviewed-by: David Ahern Reviewed-by: Eric Dumazet Reviewed-by: Douglas Anderson Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/core/neighbour.c | 9 ++++++++- 1 file changed, 8 insertions(+), 1 deletion(-) diff --git a/net/core/neighbour.c b/net/core/neighbour.c index 4c43183a8d93..432e3a64dc4a 100644 --- a/net/core/neighbour.c +++ b/net/core/neighbour.c @@ -226,9 +226,11 @@ static int neigh_forced_gc(struct neigh_table *tbl) { int max_clean = atomic_read(&tbl->gc_entries) - READ_ONCE(tbl->gc_thresh2); + u64 tmax = ktime_get_ns() + NSEC_PER_MSEC; unsigned long tref = jiffies - 5 * HZ; struct neighbour *n, *tmp; int shrunk = 0; + int loop = 0; NEIGH_CACHE_STAT_INC(tbl, forced_gc_runs); @@ -251,11 +253,16 @@ static int neigh_forced_gc(struct neigh_table *tbl) shrunk++; if (shrunk >= max_clean) break; + if (++loop == 16) { + if (ktime_get_ns() > tmax) + goto unlock; + loop = 0; + } } } WRITE_ONCE(tbl->last_flush, jiffies); - +unlock: write_unlock_bh(&tbl->lock); return shrunk; From c0f1db7380aaf38c00fc57de2965aab9c0825b9f Mon Sep 17 00:00:00 2001 From: Ye Bin Date: Mon, 11 Dec 2023 19:25:44 +0800 Subject: [PATCH 025/288] jbd2: fix soft lockup in journal_finish_inode_data_buffers() [ Upstream commit 6c02757c936063f0631b4e43fe156f8c8f1f351f ] There's issue when do io test: WARN: soft lockup - CPU#45 stuck for 11s! [jbd2/dm-2-8:4170] CPU: 45 PID: 4170 Comm: jbd2/dm-2-8 Kdump: loaded Tainted: G OE Call trace: dump_backtrace+0x0/0x1a0 show_stack+0x24/0x30 dump_stack+0xb0/0x100 watchdog_timer_fn+0x254/0x3f8 __hrtimer_run_queues+0x11c/0x380 hrtimer_interrupt+0xfc/0x2f8 arch_timer_handler_phys+0x38/0x58 handle_percpu_devid_irq+0x90/0x248 generic_handle_irq+0x3c/0x58 __handle_domain_irq+0x68/0xc0 gic_handle_irq+0x90/0x320 el1_irq+0xcc/0x180 queued_spin_lock_slowpath+0x1d8/0x320 jbd2_journal_commit_transaction+0x10f4/0x1c78 [jbd2] kjournald2+0xec/0x2f0 [jbd2] kthread+0x134/0x138 ret_from_fork+0x10/0x18 Analyzed informations from vmcore as follows: (1) There are about 5k+ jbd2_inode in 'commit_transaction->t_inode_list'; (2) Now is processing the 855th jbd2_inode; (3) JBD2 task has TIF_NEED_RESCHED flag; (4) There's no pags in address_space around the 855th jbd2_inode; (5) There are some process is doing drop caches; (6) Mounted with 'nodioread_nolock' option; (7) 128 CPUs; According to informations from vmcore we know 'journal->j_list_lock' spin lock competition is fierce. So journal_finish_inode_data_buffers() maybe process slowly. Theoretically, there is scheduling point in the filemap_fdatawait_range_keep_errors(). However, if inode's address_space has no pages which taged with PAGECACHE_TAG_WRITEBACK, will not call cond_resched(). So may lead to soft lockup. journal_finish_inode_data_buffers filemap_fdatawait_range_keep_errors __filemap_fdatawait_range while (index <= end) nr_pages = pagevec_lookup_range_tag(&pvec, mapping, &index, end, PAGECACHE_TAG_WRITEBACK); if (!nr_pages) break; --> If 'nr_pages' is equal zero will break, then will not call cond_resched() for (i = 0; i < nr_pages; i++) wait_on_page_writeback(page); cond_resched(); To solve above issue, add scheduling point in the journal_finish_inode_data_buffers(); Signed-off-by: Ye Bin Reviewed-by: Jan Kara Link: https://lore.kernel.org/r/20231211112544.3879780-1-yebin10@huawei.com Signed-off-by: Theodore Ts'o Signed-off-by: Sasha Levin --- fs/jbd2/commit.c | 1 + 1 file changed, 1 insertion(+) diff --git a/fs/jbd2/commit.c b/fs/jbd2/commit.c index fa24b407a9dc..db137671a41f 100644 --- a/fs/jbd2/commit.c +++ b/fs/jbd2/commit.c @@ -300,6 +300,7 @@ static int journal_finish_inode_data_buffers(journal_t *journal, if (!ret) ret = err; } + cond_resched(); spin_lock(&journal->j_list_lock); jinode->i_flags &= ~JI_COMMIT_RUNNING; smp_mb(); From bc6619c9aa9119f3f45fab728ed2f3846cb18593 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Sat, 9 Dec 2023 17:10:58 -0500 Subject: [PATCH 026/288] tracing: Have large events show up as '[LINE TOO BIG]' instead of nothing [ Upstream commit b55b0a0d7c4aa2dac3579aa7e6802d1f57445096 ] If a large event was added to the ring buffer that is larger than what the trace_seq can handle, it just drops the output: ~# cat /sys/kernel/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:8 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <...>-859 [001] ..... 141.118951: tracing_mark_write <...>-859 [001] ..... 141.148201: tracing_mark_write: 78901234 Instead, catch this case and add some context: ~# cat /sys/kernel/tracing/trace # tracer: nop # # entries-in-buffer/entries-written: 2/2 #P:8 # # _-----=> irqs-off/BH-disabled # / _----=> need-resched # | / _---=> hardirq/softirq # || / _--=> preempt-depth # ||| / _-=> migrate-disable # |||| / delay # TASK-PID CPU# ||||| TIMESTAMP FUNCTION # | | | ||||| | | <...>-852 [001] ..... 121.550551: tracing_mark_write[LINE TOO BIG] <...>-852 [001] ..... 121.550581: tracing_mark_write: 78901234 This now emulates the same output as trace_pipe. Link: https://lore.kernel.org/linux-trace-kernel/20231209171058.78c1a026@gandalf.local.home Cc: Mark Rutland Cc: Mathieu Desnoyers Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin --- kernel/trace/trace.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 0cbf833bebcc..548f694fc857 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -4339,7 +4339,11 @@ static int s_show(struct seq_file *m, void *v) iter->leftover = ret; } else { - print_trace_line(iter); + ret = print_trace_line(iter); + if (ret == TRACE_TYPE_PARTIAL_LINE) { + iter->seq.full = 0; + trace_seq_puts(&iter->seq, "[LINE TOO BIG]\n"); + } ret = trace_print_seq(m, &iter->seq); /* * If we overflow the seq_file buffer, then it will From 439f3bbf75547ab21d418dc756aedb2276c487e4 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Tue, 12 Dec 2023 08:44:44 -0500 Subject: [PATCH 027/288] tracing: Add size check when printing trace_marker output [ Upstream commit 60be76eeabb3d83858cc6577fc65c7d0f36ffd42 ] If for some reason the trace_marker write does not have a nul byte for the string, it will overflow the print: trace_seq_printf(s, ": %s", field->buf); The field->buf could be missing the nul byte. To prevent overflow, add the max size that the buf can be by using the event size and the field location. int max = iter->ent_size - offsetof(struct print_entry, buf); trace_seq_printf(s, ": %*.s", max, field->buf); Link: https://lore.kernel.org/linux-trace-kernel/20231212084444.4619b8ce@gandalf.local.home Cc: Mark Rutland Cc: Mathieu Desnoyers Reviewed-by: Masami Hiramatsu (Google) Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin --- kernel/trace/trace_output.c | 6 ++++-- 1 file changed, 4 insertions(+), 2 deletions(-) diff --git a/kernel/trace/trace_output.c b/kernel/trace/trace_output.c index 94b0991717b6..753b84c50848 100644 --- a/kernel/trace/trace_output.c +++ b/kernel/trace/trace_output.c @@ -1313,11 +1313,12 @@ static enum print_line_t trace_print_print(struct trace_iterator *iter, { struct print_entry *field; struct trace_seq *s = &iter->seq; + int max = iter->ent_size - offsetof(struct print_entry, buf); trace_assign_type(field, iter->ent); seq_print_ip_sym(s, field->ip, flags); - trace_seq_printf(s, ": %s", field->buf); + trace_seq_printf(s, ": %.*s", max, field->buf); return trace_handle_return(s); } @@ -1326,10 +1327,11 @@ static enum print_line_t trace_print_raw(struct trace_iterator *iter, int flags, struct trace_event *event) { struct print_entry *field; + int max = iter->ent_size - offsetof(struct print_entry, buf); trace_assign_type(field, iter->ent); - trace_seq_printf(&iter->seq, "# %lx %s", field->ip, field->buf); + trace_seq_printf(&iter->seq, "# %lx %.*s", field->ip, max, field->buf); return trace_handle_return(&iter->seq); } From 8d6913d0502503b1c8d0f0a53cc32f931f3b71e0 Mon Sep 17 00:00:00 2001 From: "Steven Rostedt (Google)" Date: Wed, 13 Dec 2023 17:54:03 -0500 Subject: [PATCH 028/288] ring-buffer: Do not record in NMI if the arch does not support cmpxchg in NMI [ Upstream commit 712292308af2265cd9b126aedfa987f10f452a33 ] As the ring buffer recording requires cmpxchg() to work, if the architecture does not support cmpxchg in NMI, then do not do any recording within an NMI. Link: https://lore.kernel.org/linux-trace-kernel/20231213175403.6fc18540@gandalf.local.home Cc: Masami Hiramatsu Cc: Mark Rutland Cc: Mathieu Desnoyers Signed-off-by: Steven Rostedt (Google) Signed-off-by: Sasha Levin --- kernel/trace/ring_buffer.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/kernel/trace/ring_buffer.c b/kernel/trace/ring_buffer.c index 5abe88091803..041b91c2ba10 100644 --- a/kernel/trace/ring_buffer.c +++ b/kernel/trace/ring_buffer.c @@ -3444,6 +3444,12 @@ rb_reserve_next_event(struct trace_buffer *buffer, int nr_loops = 0; int add_ts_default; + /* ring buffer does cmpxchg, make sure it is safe in NMI context */ + if (!IS_ENABLED(CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG) && + (unlikely(in_nmi()))) { + return NULL; + } + rb_start_commit(cpu_buffer); /* The commit page can not change after this */ From 6f1614080fc60337570126a80736597c1e66b570 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Thu, 10 Aug 2023 11:13:00 +0200 Subject: [PATCH 029/288] reset: hisilicon: hi6220: fix Wvoid-pointer-to-enum-cast warning [ Upstream commit b5ec294472794ed9ecba0cb4b8208372842e7e0d ] 'type' is an enum, thus cast of pointer on 64-bit compile test with W=1 causes: hi6220_reset.c:166:9: error: cast to smaller integer type 'enum hi6220_reset_ctrl_type' from 'const void *' [-Werror,-Wvoid-pointer-to-enum-cast] Signed-off-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20230810091300.70197-1-krzysztof.kozlowski@linaro.org Signed-off-by: Philipp Zabel Signed-off-by: Sasha Levin --- drivers/reset/hisilicon/hi6220_reset.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/reset/hisilicon/hi6220_reset.c b/drivers/reset/hisilicon/hi6220_reset.c index 19926506d033..2a7688fa9b9b 100644 --- a/drivers/reset/hisilicon/hi6220_reset.c +++ b/drivers/reset/hisilicon/hi6220_reset.c @@ -164,7 +164,7 @@ static int hi6220_reset_probe(struct platform_device *pdev) if (!data) return -ENOMEM; - type = (enum hi6220_reset_ctrl_type)of_device_get_match_data(dev); + type = (uintptr_t)of_device_get_match_data(dev); regmap = syscon_node_to_regmap(np); if (IS_ERR(regmap)) { From b0e82ef61153a8bd861c7849f278ce45cfe9298c Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Fri, 24 Nov 2023 19:59:24 -0800 Subject: [PATCH 030/288] Input: atkbd - skip ATKBD_CMD_GETID in translated mode [ Upstream commit 936e4d49ecbc8c404790504386e1422b599dec39 ] There have been multiple reports of keyboard issues on recent laptop models which can be worked around by setting i8042.dumbkbd, with the downside being this breaks the capslock LED. It seems that these issues are caused by recent laptops getting confused by ATKBD_CMD_GETID. Rather then adding and endless growing list of quirks for this, just skip ATKBD_CMD_GETID alltogether on laptops in translated mode. The main goal of sending ATKBD_CMD_GETID is to skip binding to ps/2 mice/touchpads and those are never used in translated mode. Examples of laptop models which benefit from skipping ATKBD_CMD_GETID: * "HP Laptop 15s-fq2xxx", "HP laptop 15s-fq4xxx" and "HP Laptop 15-dy2xxx" models the kbd stops working for the first 2 - 5 minutes after boot (waiting for EC watchdog reset?) * On "HP Spectre x360 13-aw2xxx" atkbd fails to probe the keyboard * At least 9 different Lenovo models have issues with ATKBD_CMD_GETID, see: https://github.com/yescallop/atkbd-nogetid This has been tested on: 1. A MSI B550M PRO-VDH WIFI desktop, where the i8042 controller is not in translated mode when no keyboard is plugged in and with a ps/2 kbd a "AT Translated Set 2 keyboard" /dev/input/event# node shows up 2. A Lenovo ThinkPad X1 Yoga gen 8 (always has a translated set 2 keyboard) Reported-by: Shang Ye Closes: https://lore.kernel.org/linux-input/886D6167733841AE+20231017135318.11142-1-yesh25@mail2.sysu.edu.cn/ Closes: https://github.com/yescallop/atkbd-nogetid Reported-by: gurevitch Closes: https://lore.kernel.org/linux-input/2iAJTwqZV6lQs26cTb38RNYqxvsink6SRmrZ5h0cBUSuf9NT0tZTsf9fEAbbto2maavHJEOP8GA1evlKa6xjKOsaskDhtJWxjcnrgPigzVo=@gurevit.ch/ Reported-by: Egor Ignatov Closes: https://lore.kernel.org/all/20210609073333.8425-1-egori@altlinux.org/ Reported-by: Anton Zhilyaev Closes: https://lore.kernel.org/linux-input/20210201160336.16008-1-anton@cpp.in/ Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2086156 Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20231115174625.7462-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin --- drivers/input/keyboard/atkbd.c | 46 +++++++++++++++++++++++++++++++--- 1 file changed, 42 insertions(+), 4 deletions(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index edc613efc158..90dd3caa4612 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -756,6 +756,44 @@ static void atkbd_deactivate(struct atkbd *atkbd) ps2dev->serio->phys); } +#ifdef CONFIG_X86 +static bool atkbd_is_portable_device(void) +{ + static const char * const chassis_types[] = { + "8", /* Portable */ + "9", /* Laptop */ + "10", /* Notebook */ + "14", /* Sub-Notebook */ + "31", /* Convertible */ + "32", /* Detachable */ + }; + int i; + + for (i = 0; i < ARRAY_SIZE(chassis_types); i++) + if (dmi_match(DMI_CHASSIS_TYPE, chassis_types[i])) + return true; + + return false; +} + +/* + * On many modern laptops ATKBD_CMD_GETID may cause problems, on these laptops + * the controller is always in translated mode. In this mode mice/touchpads will + * not work. So in this case simply assume a keyboard is connected to avoid + * confusing some laptop keyboards. + * + * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is + * ok in translated mode, only atkbd_select_set() checks atkbd->id and in + * translated mode that is a no-op. + */ +static bool atkbd_skip_getid(struct atkbd *atkbd) +{ + return atkbd->translated && atkbd_is_portable_device(); +} +#else +static inline bool atkbd_skip_getid(struct atkbd *atkbd) { return false; } +#endif + /* * atkbd_probe() probes for an AT keyboard on a serio port. */ @@ -785,12 +823,12 @@ static int atkbd_probe(struct atkbd *atkbd) */ param[0] = param[1] = 0xa5; /* initialize with invalid values */ - if (ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { + if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { /* - * If the get ID command failed, we check if we can at least set the LEDs on - * the keyboard. This should work on every keyboard out there. It also turns - * the LEDs off, which we want anyway. + * If the get ID command was skipped or failed, we check if we can at least set + * the LEDs on the keyboard. This should work on every keyboard out there. + * It also turns the LEDs off, which we want anyway. */ param[0] = 0; if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) From 6e17155869fbabaad0d5d087f1a250f6326884e2 Mon Sep 17 00:00:00 2001 From: Esther Shimanovich Date: Thu, 30 Nov 2023 19:56:19 +0000 Subject: [PATCH 031/288] Input: i8042 - add nomux quirk for Acer P459-G2-M [ Upstream commit 335fe00319e030d481a54d5e0e68d50c5e672c0e ] After the laptop lid is opened, and the device resumes from S3 deep sleep, if the user presses a keyboard key while the screen is still black, the mouse and keyboard become unusable. Enabling this quirk prevents this behavior from occurring. Signed-off-by: Esther Shimanovich Link: https://lore.kernel.org/r/20231130195615.v2.1.Ibe78a9df97ecd18dc227a5cff67d3029631d9c11@changeid Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin --- drivers/input/serio/i8042-acpipnpio.h | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/input/serio/i8042-acpipnpio.h b/drivers/input/serio/i8042-acpipnpio.h index 09528c0a8a34..124ab98ea43a 100644 --- a/drivers/input/serio/i8042-acpipnpio.h +++ b/drivers/input/serio/i8042-acpipnpio.h @@ -351,6 +351,14 @@ static const struct dmi_system_id i8042_dmi_quirk_table[] __initconst = { }, .driver_data = (void *)(SERIO_QUIRK_DRITEK) }, + { + /* Acer TravelMate P459-G2-M */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate P459-G2-M"), + }, + .driver_data = (void *)(SERIO_QUIRK_NOMUX) + }, { /* Amoi M636/A737 */ .matches = { From 9700ff5a4f77fa40e82ca59afc48da1b964f395a Mon Sep 17 00:00:00 2001 From: Vineeth Vijayan Date: Thu, 23 Nov 2023 22:52:53 +0100 Subject: [PATCH 032/288] s390/scm: fix virtual vs physical address confusion [ Upstream commit b1a6a1a77f0666a5a6dc0893ab6ec8fcae46f24c ] Fix virtual vs physical address confusion (which currently are the same). Signed-off-by: Vineeth Vijayan Reviewed-by: Peter Oberparleiter Acked-by: Alexander Gordeev Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin --- drivers/s390/block/scm_blk.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/s390/block/scm_blk.c b/drivers/s390/block/scm_blk.c index a4f6f2e62b1d..b5b36217b15e 100644 --- a/drivers/s390/block/scm_blk.c +++ b/drivers/s390/block/scm_blk.c @@ -18,6 +18,7 @@ #include #include #include +#include #include #include "scm_blk.h" @@ -131,7 +132,7 @@ static void scm_request_done(struct scm_request *scmrq) for (i = 0; i < nr_requests_per_io && scmrq->request[i]; i++) { msb = &scmrq->aob->msb[i]; - aidaw = msb->data_addr; + aidaw = (u64)phys_to_virt(msb->data_addr); if ((msb->flags & MSB_FLAG_IDA) && aidaw && IS_ALIGNED(aidaw, PAGE_SIZE)) @@ -196,12 +197,12 @@ static int scm_request_prepare(struct scm_request *scmrq) msb->scm_addr = scmdev->address + ((u64) blk_rq_pos(req) << 9); msb->oc = (rq_data_dir(req) == READ) ? MSB_OC_READ : MSB_OC_WRITE; msb->flags |= MSB_FLAG_IDA; - msb->data_addr = (u64) aidaw; + msb->data_addr = (u64)virt_to_phys(aidaw); rq_for_each_segment(bv, req, iter) { WARN_ON(bv.bv_offset); msb->blk_count += bv.bv_len >> 12; - aidaw->data_addr = (u64) page_address(bv.bv_page); + aidaw->data_addr = virt_to_phys(page_address(bv.bv_page)); aidaw++; } From 86e4e2eea4ea47e44a85d5c43c24400c71245075 Mon Sep 17 00:00:00 2001 From: Vineet Gupta Date: Fri, 8 Dec 2023 15:57:07 -0800 Subject: [PATCH 033/288] ARC: fix spare error [ Upstream commit aca02d933f63ba8bc84258bf35f9ffaf6b664336 ] Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202312082320.VDN5A9hb-lkp@intel.com/ Signed-off-by: Vineet Gupta Signed-off-by: Sasha Levin --- arch/arc/kernel/signal.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/arch/arc/kernel/signal.c b/arch/arc/kernel/signal.c index 4868bdebf586..c43d323bcb59 100644 --- a/arch/arc/kernel/signal.c +++ b/arch/arc/kernel/signal.c @@ -61,7 +61,7 @@ struct rt_sigframe { unsigned int sigret_magic; }; -static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs) +static int save_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs) { int err = 0; #ifndef CONFIG_ISA_ARCOMPACT @@ -74,12 +74,12 @@ static int save_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs) #else v2abi.r58 = v2abi.r59 = 0; #endif - err = __copy_to_user(&mctx->v2abi, &v2abi, sizeof(v2abi)); + err = __copy_to_user(&mctx->v2abi, (void const *)&v2abi, sizeof(v2abi)); #endif return err; } -static int restore_arcv2_regs(struct sigcontext *mctx, struct pt_regs *regs) +static int restore_arcv2_regs(struct sigcontext __user *mctx, struct pt_regs *regs) { int err = 0; #ifndef CONFIG_ISA_ARCOMPACT From a57c59c85c5a5a3577982f0f41b393069602d45c Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Sat, 25 Nov 2023 17:22:15 +0100 Subject: [PATCH 034/288] Input: xpad - add Razer Wolverine V2 support [ Upstream commit c3d1610345b79cbe29ef6ca04a4780eff0d360c7 ] Add the VID and PID of Razer Wolverine V2 to xpad_device. Signed-off-by: Luca Weiss Link: https://lore.kernel.org/r/20231125-razer-wolverine-v2-v1-1-979fe9f9288e@z3ntu.xyz Signed-off-by: Dmitry Torokhov Signed-off-by: Sasha Levin --- drivers/input/joystick/xpad.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index beedad0fe09a..239471cf7e4c 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -266,6 +266,7 @@ static const struct xpad_device { { 0x146b, 0x0604, "Bigben Interactive DAIJA Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 }, { 0x1532, 0x0a00, "Razer Atrox Arcade Stick", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE }, { 0x1532, 0x0a03, "Razer Wildcat", 0, XTYPE_XBOXONE }, + { 0x1532, 0x0a29, "Razer Wolverine V2", 0, XTYPE_XBOXONE }, { 0x15e4, 0x3f00, "Power A Mini Pro Elite", 0, XTYPE_XBOX360 }, { 0x15e4, 0x3f0a, "Xbox Airflo wired controller", 0, XTYPE_XBOX360 }, { 0x15e4, 0x3f10, "Batarang Xbox 360 controller", 0, XTYPE_XBOX360 }, From d8a07ba130da09763442adb598d6c881fa777cc3 Mon Sep 17 00:00:00 2001 From: Jensen Huang Date: Thu, 7 Dec 2023 16:21:59 +0800 Subject: [PATCH 035/288] i2c: rk3x: fix potential spinlock recursion on poll [ Upstream commit 19cde9c92b8d3b7ee555d0da3bcb0232d3a784f4 ] Possible deadlock scenario (on reboot): rk3x_i2c_xfer_common(polling) -> rk3x_i2c_wait_xfer_poll() -> rk3x_i2c_irq(0, i2c); --> spin_lock(&i2c->lock); ... -> rk3x_i2c_irq(0, i2c); --> spin_lock(&i2c->lock); (deadlock here) Store the IRQ number and disable/enable it around the polling transfer. This patch has been tested on NanoPC-T4. Signed-off-by: Jensen Huang Reviewed-by: Heiko Stuebner Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-rk3x.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-rk3x.c b/drivers/i2c/busses/i2c-rk3x.c index 13c14eb175e9..6abcf975a2db 100644 --- a/drivers/i2c/busses/i2c-rk3x.c +++ b/drivers/i2c/busses/i2c-rk3x.c @@ -178,6 +178,7 @@ struct rk3x_i2c_soc_data { * @clk: function clk for rk3399 or function & Bus clks for others * @pclk: Bus clk for rk3399 * @clk_rate_nb: i2c clk rate change notify + * @irq: irq number * @t: I2C known timing information * @lock: spinlock for the i2c bus * @wait: the waitqueue to wait for i2c transfer @@ -200,6 +201,7 @@ struct rk3x_i2c { struct clk *clk; struct clk *pclk; struct notifier_block clk_rate_nb; + int irq; /* Settings */ struct i2c_timings t; @@ -1087,13 +1089,18 @@ static int rk3x_i2c_xfer_common(struct i2c_adapter *adap, spin_unlock_irqrestore(&i2c->lock, flags); - rk3x_i2c_start(i2c); - if (!polling) { + rk3x_i2c_start(i2c); + timeout = wait_event_timeout(i2c->wait, !i2c->busy, msecs_to_jiffies(WAIT_TIMEOUT)); } else { + disable_irq(i2c->irq); + rk3x_i2c_start(i2c); + timeout = rk3x_i2c_wait_xfer_poll(i2c); + + enable_irq(i2c->irq); } spin_lock_irqsave(&i2c->lock, flags); @@ -1301,6 +1308,8 @@ static int rk3x_i2c_probe(struct platform_device *pdev) return ret; } + i2c->irq = irq; + platform_set_drvdata(pdev, i2c); if (i2c->soc_data->calc_timings == rk3x_i2c_v0_calc_timings) { From dbf8b0d9387fa02de0aa047ce23eb3a7bd134e03 Mon Sep 17 00:00:00 2001 From: "Matthew Wilcox (Oracle)" Date: Thu, 21 Dec 2023 16:53:57 +0000 Subject: [PATCH 036/288] ida: Fix crash in ida_free when the bitmap is empty [ Upstream commit af73483f4e8b6f5c68c9aa63257bdd929a9c194a ] The IDA usually detects double-frees, but that detection failed to consider the case when there are no nearby IDs allocated and so we have a NULL bitmap rather than simply having a clear bit. Add some tests to the test-suite to be sure we don't inadvertently reintroduce this problem. Unfortunately they're quite noisy so include a message to disregard the warnings. Reported-by: Zhenghan Wang Signed-off-by: Matthew Wilcox (Oracle) Signed-off-by: Linus Torvalds Signed-off-by: Sasha Levin --- lib/idr.c | 2 +- lib/test_ida.c | 40 ++++++++++++++++++++++++++++++++++++++++ 2 files changed, 41 insertions(+), 1 deletion(-) diff --git a/lib/idr.c b/lib/idr.c index 13f2758c2377..da36054c3ca0 100644 --- a/lib/idr.c +++ b/lib/idr.c @@ -508,7 +508,7 @@ void ida_free(struct ida *ida, unsigned int id) goto delete; xas_store(&xas, xa_mk_value(v)); } else { - if (!test_bit(bit, bitmap->bitmap)) + if (!bitmap || !test_bit(bit, bitmap->bitmap)) goto err; __clear_bit(bit, bitmap->bitmap); xas_set_mark(&xas, XA_FREE_MARK); diff --git a/lib/test_ida.c b/lib/test_ida.c index b06880625961..55105baa19da 100644 --- a/lib/test_ida.c +++ b/lib/test_ida.c @@ -150,6 +150,45 @@ static void ida_check_conv(struct ida *ida) IDA_BUG_ON(ida, !ida_is_empty(ida)); } +/* + * Check various situations where we attempt to free an ID we don't own. + */ +static void ida_check_bad_free(struct ida *ida) +{ + unsigned long i; + + printk("vvv Ignore \"not allocated\" warnings\n"); + /* IDA is empty; all of these will fail */ + ida_free(ida, 0); + for (i = 0; i < 31; i++) + ida_free(ida, 1 << i); + + /* IDA contains a single value entry */ + IDA_BUG_ON(ida, ida_alloc_min(ida, 3, GFP_KERNEL) != 3); + ida_free(ida, 0); + for (i = 0; i < 31; i++) + ida_free(ida, 1 << i); + + /* IDA contains a single bitmap */ + IDA_BUG_ON(ida, ida_alloc_min(ida, 1023, GFP_KERNEL) != 1023); + ida_free(ida, 0); + for (i = 0; i < 31; i++) + ida_free(ida, 1 << i); + + /* IDA contains a tree */ + IDA_BUG_ON(ida, ida_alloc_min(ida, (1 << 20) - 1, GFP_KERNEL) != (1 << 20) - 1); + ida_free(ida, 0); + for (i = 0; i < 31; i++) + ida_free(ida, 1 << i); + printk("^^^ \"not allocated\" warnings over\n"); + + ida_free(ida, 3); + ida_free(ida, 1023); + ida_free(ida, (1 << 20) - 1); + + IDA_BUG_ON(ida, !ida_is_empty(ida)); +} + static DEFINE_IDA(ida); static int ida_checks(void) @@ -162,6 +201,7 @@ static int ida_checks(void) ida_check_leaf(&ida, 1024 * 64); ida_check_max(&ida); ida_check_conv(&ida); + ida_check_bad_free(&ida); printk("IDA: %u of %u tests passed\n", tests_passed, tests_run); return (tests_run != tests_passed) ? 0 : -EINVAL; From 01d89184152fbcb99297a0d087c233b6c31acf9f Mon Sep 17 00:00:00 2001 From: Sarannya S Date: Thu, 21 Dec 2023 15:36:51 +0530 Subject: [PATCH 037/288] net: qrtr: ns: Return 0 if server port is not present [ Upstream commit 9bf2e9165f90dc9f416af53c902be7e33930f728 ] When a 'DEL_CLIENT' message is received from the remote, the corresponding server port gets deleted. A DEL_SERVER message is then announced for this server. As part of handling the subsequent DEL_SERVER message, the name- server attempts to delete the server port which results in a '-ENOENT' error. The return value from server_del() is then propagated back to qrtr_ns_worker, causing excessive error prints. To address this, return 0 from control_cmd_del_server() without checking the return value of server_del(), since the above scenario is not an error case and hence server_del() doesn't have any other error return value. Signed-off-by: Sarannya Sasikumar Reviewed-by: Simon Horman Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/qrtr/ns.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/net/qrtr/ns.c b/net/qrtr/ns.c index 713e9940d88b..c92dd960bfef 100644 --- a/net/qrtr/ns.c +++ b/net/qrtr/ns.c @@ -577,7 +577,9 @@ static int ctrl_cmd_del_server(struct sockaddr_qrtr *from, if (!node) return -ENOENT; - return server_del(node, port, true); + server_del(node, port, true); + + return 0; } static int ctrl_cmd_new_lookup(struct sockaddr_qrtr *from, From 7ba78e08238baf8c8c3ced59610bfca618c4d3dd Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Thu, 28 Dec 2023 20:39:03 +0100 Subject: [PATCH 038/288] ARM: sun9i: smp: fix return code check of of_property_match_string [ Upstream commit 643fe70e7bcdcc9e2d96952f7fc2bab56385cce5 ] of_property_match_string returns an int; either an index from 0 or greater if successful or negative on failure. Even it's very unlikely that the DT CPU node contains multiple enable-methods these checks should be fixed. This patch was inspired by the work of Nick Desaulniers. Link: https://lore.kernel.org/lkml/20230516-sunxi-v1-1-ac4b9651a8c1@google.com/T/ Cc: Nick Desaulniers Signed-off-by: Stefan Wahren Link: https://lore.kernel.org/r/20231228193903.9078-2-wahrenst@gmx.net Reviewed-by: Chen-Yu Tsai Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin --- arch/arm/mach-sunxi/mc_smp.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/arm/mach-sunxi/mc_smp.c b/arch/arm/mach-sunxi/mc_smp.c index b2f5f4f28705..f779e386b6e7 100644 --- a/arch/arm/mach-sunxi/mc_smp.c +++ b/arch/arm/mach-sunxi/mc_smp.c @@ -804,12 +804,12 @@ static int __init sunxi_mc_smp_init(void) for (i = 0; i < ARRAY_SIZE(sunxi_mc_smp_data); i++) { ret = of_property_match_string(node, "enable-method", sunxi_mc_smp_data[i].enable_method); - if (!ret) + if (ret >= 0) break; } of_node_put(node); - if (ret) + if (ret < 0) return -ENODEV; is_a83t = sunxi_mc_smp_data[i].is_a83t; From f138fb6e640b81dca3a7a32d58ea823736bb0279 Mon Sep 17 00:00:00 2001 From: Jani Nikula Date: Fri, 8 Dec 2023 15:12:38 +0200 Subject: [PATCH 039/288] drm/crtc: fix uninitialized variable use [ Upstream commit 6e455f5dcdd15fa28edf0ffb5b44d3508512dccf ] Commit 3823119b9c2b ("drm/crtc: Fix uninit-value bug in drm_mode_setcrtc") was supposed to fix use of an uninitialized variable, but introduced another. num_connectors is only initialized if crtc_req->count_connectors > 0, but it's used regardless. Fix it. Fixes: 3823119b9c2b ("drm/crtc: Fix uninit-value bug in drm_mode_setcrtc") Cc: syzbot+4fad2e57beb6397ab2fc@syzkaller.appspotmail.com Cc: Ziqi Zhao Cc: Maxime Ripard Cc: Maarten Lankhorst Cc: Thomas Zimmermann Signed-off-by: Jani Nikula Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20231208131238.2924571-1-jani.nikula@intel.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/drm_crtc.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index b3c0a9ea8c6f..4ed3fc28d4da 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -562,7 +562,7 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, struct drm_mode_set set; uint32_t __user *set_connectors_ptr; struct drm_modeset_acquire_ctx ctx; - int ret, i, num_connectors; + int ret, i, num_connectors = 0; if (!drm_core_check_feature(dev, DRIVER_MODESET)) return -EOPNOTSUPP; @@ -700,7 +700,6 @@ int drm_mode_setcrtc(struct drm_device *dev, void *data, goto out; } - num_connectors = 0; for (i = 0; i < crtc_req->count_connectors; i++) { connector_set[i] = NULL; set_connectors_ptr = (uint32_t __user *)(unsigned long)crtc_req->set_connectors_ptr; From 19d949b37e4ad3721c0b43159930bdc08b590ba3 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Sat, 23 Dec 2023 15:57:06 +0100 Subject: [PATCH 040/288] ACPI: resource: Add another DMI match for the TongFang GMxXGxx commit df0cced74159c79e36ce7971f0bf250673296d93 upstream. The TongFang GMxXGxx, which needs IRQ overriding for the keyboard to work, is also sold as the Eluktronics RP-15 which does not use the standard TongFang GMxXGxx DMI board_name. Add an entry for this laptop to the irq1_edge_low_force_override[] DMI table to make the internal keyboard functional. Reported-by: Luis Acuna Signed-off-by: Hans de Goede Cc: All applicable Signed-off-by: Rafael J. Wysocki Signed-off-by: Greg Kroah-Hartman --- drivers/acpi/resource.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/acpi/resource.c b/drivers/acpi/resource.c index 508d22728ce8..42b1b06efda6 100644 --- a/drivers/acpi/resource.c +++ b/drivers/acpi/resource.c @@ -455,6 +455,13 @@ static const struct dmi_system_id asus_laptop[] = { DMI_MATCH(DMI_BOARD_NAME, "B1402CVA"), }, }, + { + /* TongFang GMxXGxx sold as Eluktronics Inc. RP-15 */ + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Eluktronics Inc."), + DMI_MATCH(DMI_BOARD_NAME, "RP-15"), + }, + }, { /* TongFang GM6XGxX/TUXEDO Stellaris 16 Gen5 AMD */ .matches = { From e18d60757bcac58384169ad5c33d48b9c95a31dd Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Fri, 1 Dec 2023 17:21:30 +0000 Subject: [PATCH 041/288] binder: use EPOLLERR from eventpoll.h commit 6ac061db9c58ca5b9270b1b3940d2464fb3ff183 upstream. Use EPOLLERR instead of POLLERR to make sure it is cast to the correct __poll_t type. This fixes the following sparse issue: drivers/android/binder.c:5030:24: warning: incorrect type in return expression (different base types) drivers/android/binder.c:5030:24: expected restricted __poll_t drivers/android/binder.c:5030:24: got int Fixes: f88982679f54 ("binder: check for binder_thread allocation failure in binder_poll()") Cc: stable@vger.kernel.org Cc: Eric Biggers Reviewed-by: Alice Ryhl Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20231201172212.1813387-2-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/android/binder.c b/drivers/android/binder.c index 2aaccb78235b..7db748cfcbc6 100644 --- a/drivers/android/binder.c +++ b/drivers/android/binder.c @@ -5173,7 +5173,7 @@ static __poll_t binder_poll(struct file *filp, thread = binder_get_thread(proc); if (!thread) - return POLLERR; + return EPOLLERR; binder_inner_proc_lock(thread->proc); thread->looper |= BINDER_LOOPER_STATE_POLL; From 689f13128fbcb4f5f47d61a39f8e358f185256ad Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Fri, 1 Dec 2023 17:21:35 +0000 Subject: [PATCH 042/288] binder: fix trivial typo of binder_free_buf_locked() commit 122a3c1cb0ff304c2b8934584fcfea4edb2fe5e3 upstream. Fix minor misspelling of the function in the comment section. No functional changes in this patch. Cc: stable@vger.kernel.org Fixes: 0f966cba95c7 ("binder: add flag to clear buffer on txn complete") Reviewed-by: Alice Ryhl Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20231201172212.1813387-7-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index b6bf9caaf1d1..c34996162e9e 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -711,7 +711,7 @@ void binder_alloc_free_buf(struct binder_alloc *alloc, /* * We could eliminate the call to binder_alloc_clear_buf() * from binder_alloc_deferred_release() by moving this to - * binder_alloc_free_buf_locked(). However, that could + * binder_free_buf_locked(). However, that could * increase contention for the alloc mutex if clear_on_free * is used frequently for large buffers. The mutex is not * needed for correctness here. From 214aac202d97a0da48ee26833843488aeea89df5 Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Fri, 1 Dec 2023 17:21:36 +0000 Subject: [PATCH 043/288] binder: fix comment on binder_alloc_new_buf() return value commit e1090371e02b601cbfcea175c2a6cc7c955fa830 upstream. Update the comments of binder_alloc_new_buf() to reflect that the return value of the function is now ERR_PTR(-errno) on failure. No functional changes in this patch. Cc: stable@vger.kernel.org Fixes: 57ada2fb2250 ("binder: add log information for binder transaction failures") Reviewed-by: Alice Ryhl Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20231201172212.1813387-8-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder_alloc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index c34996162e9e..cbcbc1e70a23 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -562,7 +562,7 @@ static struct binder_buffer *binder_alloc_new_buf_locked( * is the sum of the three given sizes (each rounded up to * pointer-sized boundary) * - * Return: The allocated buffer or %NULL if error + * Return: The allocated buffer or %ERR_PTR(-errno) if error */ struct binder_buffer *binder_alloc_new_buf(struct binder_alloc *alloc, size_t data_size, From 5e0be1229ae199ebb90b33102f74a0f22d152570 Mon Sep 17 00:00:00 2001 From: Guanghui Feng Date: Thu, 21 Dec 2023 17:57:43 +0800 Subject: [PATCH 044/288] uio: Fix use-after-free in uio_open commit 0c9ae0b8605078eafc3bea053cc78791e97ba2e2 upstream. core-1 core-2 ------------------------------------------------------- uio_unregister_device uio_open idev = idr_find() device_unregister(&idev->dev) put_device(&idev->dev) uio_device_release get_device(&idev->dev) kfree(idev) uio_free_minor(minor) uio_release put_device(&idev->dev) kfree(idev) ------------------------------------------------------- In the core-1 uio_unregister_device(), the device_unregister will kfree idev when the idev->dev kobject ref is 1. But after core-1 device_unregister, put_device and before doing kfree, the core-2 may get_device. Then: 1. After core-1 kfree idev, the core-2 will do use-after-free for idev. 2. When core-2 do uio_release and put_device, the idev will be double freed. To address this issue, we can get idev atomic & inc idev reference with minor_lock. Fixes: 57c5f4df0a5a ("uio: fix crash after the device is unregistered") Cc: stable Signed-off-by: Guanghui Feng Reviewed-by: Baolin Wang Link: https://lore.kernel.org/r/1703152663-59949-1-git-send-email-guanghuifeng@linux.alibaba.com Signed-off-by: Greg Kroah-Hartman --- drivers/uio/uio.c | 7 +++---- 1 file changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/uio/uio.c b/drivers/uio/uio.c index be06f1a961c2..f453b3c7ee42 100644 --- a/drivers/uio/uio.c +++ b/drivers/uio/uio.c @@ -464,13 +464,13 @@ static int uio_open(struct inode *inode, struct file *filep) mutex_lock(&minor_lock); idev = idr_find(&uio_idr, iminor(inode)); - mutex_unlock(&minor_lock); if (!idev) { ret = -ENODEV; + mutex_unlock(&minor_lock); goto out; } - get_device(&idev->dev); + mutex_unlock(&minor_lock); if (!try_module_get(idev->owner)) { ret = -ENODEV; @@ -1062,9 +1062,8 @@ void uio_unregister_device(struct uio_info *info) wake_up_interruptible(&idev->wait); kill_fasync(&idev->async_queue, SIGIO, POLL_HUP); - device_unregister(&idev->dev); - uio_free_minor(minor); + device_unregister(&idev->dev); return; } From 937293ff64f45fbcf4c33791eba36e88b5c0f39c Mon Sep 17 00:00:00 2001 From: Cameron Williams Date: Thu, 2 Nov 2023 21:07:05 +0000 Subject: [PATCH 045/288] parport: parport_serial: Add Brainboxes BAR details commit 65fde134b0a4ffe838729f9ee11b459a2f6f2815 upstream. Add BAR/enum entries for Brainboxes serial/parallel cards. Cc: Signed-off-by: Cameron Williams Acked-by: Sudip Mukherjee Link: https://lore.kernel.org/r/AS4PR02MB79035155C2D5C3333AE6FA52C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_serial.c | 8 ++++++++ 1 file changed, 8 insertions(+) diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 96b888bb49c6..026bb4634aa2 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -65,6 +65,10 @@ enum parport_pc_pci_cards { sunix_5069a, sunix_5079a, sunix_5099a, + brainboxes_uc257, + brainboxes_is300, + brainboxes_uc414, + brainboxes_px263, }; /* each element directly indexed from enum list, above */ @@ -158,6 +162,10 @@ static struct parport_pc_pci cards[] = { /* sunix_5069a */ { 1, { { 1, 2 }, } }, /* sunix_5079a */ { 1, { { 1, 2 }, } }, /* sunix_5099a */ { 1, { { 1, 2 }, } }, + /* brainboxes_uc257 */ { 1, { { 3, -1 }, } }, + /* brainboxes_is300 */ { 1, { { 3, -1 }, } }, + /* brainboxes_uc414 */ { 1, { { 3, -1 }, } }, + /* brainboxes_px263 */ { 1, { { 3, -1 }, } }, }; static struct pci_device_id parport_serial_pci_tbl[] = { From e5457b54add04cf522ee77c4e956ed4749ced09f Mon Sep 17 00:00:00 2001 From: Cameron Williams Date: Thu, 2 Nov 2023 21:07:06 +0000 Subject: [PATCH 046/288] parport: parport_serial: Add Brainboxes device IDs and geometry commit 6aa1fc5a8085bbc01687aa708dcf2dbe637a5ee3 upstream. Add device IDs for the Brainboxes UC-203, UC-257, UC-414, UC-475, IS-300/IS-500 and PX-263/PX-295 and define the relevant "geometry" for the cards. This patch requires part 1 of this series. Cc: Signed-off-by: Cameron Williams Acked-by: Sudip Mukherjee Link: https://lore.kernel.org/r/AS4PR02MB7903A4094564BE28F1F926A6C4A6A@AS4PR02MB7903.eurprd02.prod.outlook.com Signed-off-by: Greg Kroah-Hartman --- drivers/parport/parport_serial.c | 56 ++++++++++++++++++++++++++++++++ 1 file changed, 56 insertions(+) diff --git a/drivers/parport/parport_serial.c b/drivers/parport/parport_serial.c index 026bb4634aa2..46f213270689 100644 --- a/drivers/parport/parport_serial.c +++ b/drivers/parport/parport_serial.c @@ -285,6 +285,38 @@ static struct pci_device_id parport_serial_pci_tbl[] = { { PCI_VENDOR_ID_SUNIX, PCI_DEVICE_ID_SUNIX_1999, PCI_VENDOR_ID_SUNIX, 0x0104, 0, 0, sunix_5099a }, + /* Brainboxes UC-203 */ + { PCI_VENDOR_ID_INTASHIELD, 0x0bc1, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0bc2, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 }, + + /* Brainboxes UC-257 */ + { PCI_VENDOR_ID_INTASHIELD, 0x0861, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0862, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0863, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 }, + + /* Brainboxes UC-414 */ + { PCI_VENDOR_ID_INTASHIELD, 0x0e61, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc414 }, + + /* Brainboxes UC-475 */ + { PCI_VENDOR_ID_INTASHIELD, 0x0981, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 }, + { PCI_VENDOR_ID_INTASHIELD, 0x0982, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_uc257 }, + + /* Brainboxes IS-300/IS-500 */ + { PCI_VENDOR_ID_INTASHIELD, 0x0da0, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_is300 }, + + /* Brainboxes PX-263/PX-295 */ + { PCI_VENDOR_ID_INTASHIELD, 0x402c, + PCI_ANY_ID, PCI_ANY_ID, 0, 0, brainboxes_px263 }, + { 0, } /* terminate list */ }; MODULE_DEVICE_TABLE(pci,parport_serial_pci_tbl); @@ -550,6 +582,30 @@ static struct pciserial_board pci_parport_serial_boards[] = { .base_baud = 921600, .uart_offset = 0x8, }, + [brainboxes_uc257] = { + .flags = FL_BASE2, + .num_ports = 2, + .base_baud = 115200, + .uart_offset = 8, + }, + [brainboxes_is300] = { + .flags = FL_BASE2, + .num_ports = 1, + .base_baud = 115200, + .uart_offset = 8, + }, + [brainboxes_uc414] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 115200, + .uart_offset = 8, + }, + [brainboxes_px263] = { + .flags = FL_BASE2, + .num_ports = 4, + .base_baud = 921600, + .uart_offset = 8, + }, }; struct parport_serial_private { From 67d3d17e316695601b7804bad20f5f608b0c2e0a Mon Sep 17 00:00:00 2001 From: LeoLiuoc Date: Mon, 11 Dec 2023 17:15:43 +0800 Subject: [PATCH 047/288] PCI: Add ACS quirk for more Zhaoxin Root Ports commit e367e3c765f5477b2e79da0f1399aed49e2d1e37 upstream. Add more Root Port Device IDs to pci_quirk_zhaoxin_pcie_ports_acs() for some new Zhaoxin platforms. Fixes: 299bd044a6f3 ("PCI: Add ACS quirk for Zhaoxin Root/Downstream Ports") Link: https://lore.kernel.org/r/20231211091543.735903-1-LeoLiu-oc@zhaoxin.com Signed-off-by: LeoLiuoc [bhelgaas: update subject, drop changelog, add Fixes, add stable tag, fix whitespace, wrap code comment] Signed-off-by: Bjorn Helgaas Cc: # 5.7 Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 500905dad643..21661feeeeb6 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -4551,17 +4551,21 @@ static int pci_quirk_xgene_acs(struct pci_dev *dev, u16 acs_flags) * But the implementation could block peer-to-peer transactions between them * and provide ACS-like functionality. */ -static int pci_quirk_zhaoxin_pcie_ports_acs(struct pci_dev *dev, u16 acs_flags) +static int pci_quirk_zhaoxin_pcie_ports_acs(struct pci_dev *dev, u16 acs_flags) { if (!pci_is_pcie(dev) || ((pci_pcie_type(dev) != PCI_EXP_TYPE_ROOT_PORT) && (pci_pcie_type(dev) != PCI_EXP_TYPE_DOWNSTREAM))) return -ENOTTY; + /* + * Future Zhaoxin Root Ports and Switch Downstream Ports will + * implement ACS capability in accordance with the PCIe Spec. + */ switch (dev->device) { case 0x0710 ... 0x071e: case 0x0721: - case 0x0723 ... 0x0732: + case 0x0723 ... 0x0752: return pci_acs_ctrl_enabled(acs_flags, PCI_ACS_SV | PCI_ACS_RR | PCI_ACS_CR | PCI_ACS_UF); } From 83da4fc5aa5c45cd2820f36a00bab7d04b0e6035 Mon Sep 17 00:00:00 2001 From: James Clark Date: Wed, 1 Nov 2023 11:52:06 +0000 Subject: [PATCH 048/288] coresight: etm4x: Fix width of CCITMIN field commit cc0271a339cc70cae914c3ec20edc2a8058407da upstream. CCITMIN is a 12 bit field and doesn't fit in a u8, so extend it to u16. This probably wasn't an issue previously because values higher than 255 never occurred. But since commit 4aff040bcc8d ("coresight: etm: Override TRCIDR3.CCITMIN on errata affected cpus"), a comparison with 256 was done to enable the errata, generating the following W=1 build error: coresight-etm4x-core.c:1188:24: error: result of comparison of constant 256 with expression of type 'u8' (aka 'unsigned char') is always false [-Werror,-Wtautological-constant-out-of-range-compare] if (drvdata->ccitmin == 256) Cc: stable@vger.kernel.org Fixes: 2e1cdfe184b5 ("coresight-etm4x: Adding CoreSight ETM4x driver") Reported-by: kernel test robot Closes: https://lore.kernel.org/oe-kbuild-all/202310302043.as36UFED-lkp@intel.com/ Reviewed-by: Mike Leach Signed-off-by: James Clark Signed-off-by: Suzuki K Poulose Link: https://lore.kernel.org/r/20231101115206.70810-1-james.clark@arm.com Signed-off-by: Greg Kroah-Hartman --- drivers/hwtracing/coresight/coresight-etm4x.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/hwtracing/coresight/coresight-etm4x.h b/drivers/hwtracing/coresight/coresight-etm4x.h index eefc7371c6c4..2c994a8c4a76 100644 --- a/drivers/hwtracing/coresight/coresight-etm4x.h +++ b/drivers/hwtracing/coresight/coresight-etm4x.h @@ -440,7 +440,7 @@ struct etmv4_drvdata { u8 ctxid_size; u8 vmid_size; u8 ccsize; - u8 ccitmin; + u16 ccitmin; u8 s_ex_level; u8 ns_ex_level; u8 q_support; From 36dbbfff2823e0f74010d3e2ee01d4b3f4dcfef0 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Thu, 2 Nov 2023 17:49:01 +0000 Subject: [PATCH 049/288] x86/lib: Fix overflow when counting digits [ Upstream commit a24d61c609813963aacc9f6ec8343f4fcaac7243 ] tl;dr: The num_digits() function has a theoretical overflow issue. But it doesn't affect any actual in-tree users. Fix it by using a larger type for one of the local variables. Long version: There is an overflow in variable m in function num_digits when val is >= 1410065408 which leads to the digit calculation loop to iterate more times than required. This results in either more digits being counted or in some cases (for example where val is 1932683193) the value of m eventually overflows to zero and the while loop spins forever). Currently the function num_digits is currently only being used for small values of val in the SMP boot stage for digit counting on the number of cpus and NUMA nodes, so the overflow is never encountered. However it is useful to fix the overflow issue in case the function is used for other purposes in the future. (The issue was discovered while investigating the digit counting performance in various kernel helper functions rather than any real-world use-case). The simplest fix is to make m a long long, the overhead in multiplication speed for a long long is very minor for small values of val less than 10000 on modern processors. The alternative fix is to replace the multiplication with a constant division by 10 loop (this compiles down to an multiplication and shift) without needing to make m a long long, but this is slightly slower than the fix in this commit when measured on a range of x86 processors). [ dhansen: subject and changelog tweaks ] Fixes: 646e29a1789a ("x86: Improve the printout of the SMP bootup CPU table") Signed-off-by: Colin Ian King Signed-off-by: Dave Hansen Link: https://lore.kernel.org/all/20231102174901.2590325-1-colin.i.king%40gmail.com Signed-off-by: Sasha Levin --- arch/x86/lib/misc.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/x86/lib/misc.c b/arch/x86/lib/misc.c index a018ec4fba53..c97be9a1430a 100644 --- a/arch/x86/lib/misc.c +++ b/arch/x86/lib/misc.c @@ -6,7 +6,7 @@ */ int num_digits(int val) { - int m = 10; + long long m = 10; int d = 1; if (val < 0) { From 6aa7865ba7ff7f0ede0035180fb3b9400ceb405a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 22 Nov 2023 23:19:53 +0100 Subject: [PATCH 050/288] EDAC/thunderx: Fix possible out-of-bounds string access [ Upstream commit 475c58e1a471e9b873e3e39958c64a2d278275c8 ] Enabling -Wstringop-overflow globally exposes a warning for a common bug in the usage of strncat(): drivers/edac/thunderx_edac.c: In function 'thunderx_ocx_com_threaded_isr': drivers/edac/thunderx_edac.c:1136:17: error: 'strncat' specified bound 1024 equals destination size [-Werror=stringop-overflow=] 1136 | strncat(msg, other, OCX_MESSAGE_SIZE); | ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ ... 1145 | strncat(msg, other, OCX_MESSAGE_SIZE); ... 1150 | strncat(msg, other, OCX_MESSAGE_SIZE); ... Apparently the author of this driver expected strncat() to behave the way that strlcat() does, which uses the size of the destination buffer as its third argument rather than the length of the source buffer. The result is that there is no check on the size of the allocated buffer. Change it to strlcat(). [ bp: Trim compiler output, fixup commit message. ] Fixes: 41003396f932 ("EDAC, thunderx: Add Cavium ThunderX EDAC driver") Signed-off-by: Arnd Bergmann Signed-off-by: Borislav Petkov (AMD) Reviewed-by: Gustavo A. R. Silva Link: https://lore.kernel.org/r/20231122222007.3199885-1-arnd@kernel.org Signed-off-by: Sasha Levin --- drivers/edac/thunderx_edac.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/edac/thunderx_edac.c b/drivers/edac/thunderx_edac.c index 0eb5eb97fd74..3b0e1fe27d93 100644 --- a/drivers/edac/thunderx_edac.c +++ b/drivers/edac/thunderx_edac.c @@ -1133,7 +1133,7 @@ static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) decode_register(other, OCX_OTHER_SIZE, ocx_com_errors, ctx->reg_com_int); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); for (lane = 0; lane < OCX_RX_LANES; lane++) if (ctx->reg_com_int & BIT(lane)) { @@ -1142,12 +1142,12 @@ static irqreturn_t thunderx_ocx_com_threaded_isr(int irq, void *irq_id) lane, ctx->reg_lane_int[lane], lane, ctx->reg_lane_stat11[lane]); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); decode_register(other, OCX_OTHER_SIZE, ocx_lane_errors, ctx->reg_lane_int[lane]); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); } if (ctx->reg_com_int & OCX_COM_INT_CE) @@ -1217,7 +1217,7 @@ static irqreturn_t thunderx_ocx_lnk_threaded_isr(int irq, void *irq_id) decode_register(other, OCX_OTHER_SIZE, ocx_com_link_errors, ctx->reg_com_link_int); - strncat(msg, other, OCX_MESSAGE_SIZE); + strlcat(msg, other, OCX_MESSAGE_SIZE); if (ctx->reg_com_link_int & OCX_COM_LINK_INT_UE) edac_device_handle_ue(ocx->edac_dev, 0, 0, msg); @@ -1896,7 +1896,7 @@ static irqreturn_t thunderx_l2c_threaded_isr(int irq, void *irq_id) decode_register(other, L2C_OTHER_SIZE, l2_errors, ctx->reg_int); - strncat(msg, other, L2C_MESSAGE_SIZE); + strlcat(msg, other, L2C_MESSAGE_SIZE); if (ctx->reg_int & mask_ue) edac_device_handle_ue(l2c->edac_dev, 0, 0, msg); From ecbbd90e7046a8916fae76ba7854c10e0a71cdee Mon Sep 17 00:00:00 2001 From: Masahiro Yamada Date: Tue, 21 Nov 2023 08:23:32 +0900 Subject: [PATCH 051/288] powerpc: add crtsavres.o to always-y instead of extra-y [ Upstream commit 1b1e38002648819c04773647d5242990e2824264 ] crtsavres.o is linked to modules. However, as explained in commit d0e628cd817f ("kbuild: doc: clarify the difference between extra-y and always-y"), 'make modules' does not build extra-y. For example, the following command fails: $ make ARCH=powerpc LLVM=1 KBUILD_MODPOST_WARN=1 mrproper ps3_defconfig modules [snip] LD [M] arch/powerpc/platforms/cell/spufs/spufs.ko ld.lld: error: cannot open arch/powerpc/lib/crtsavres.o: No such file or directory make[3]: *** [scripts/Makefile.modfinal:56: arch/powerpc/platforms/cell/spufs/spufs.ko] Error 1 make[2]: *** [Makefile:1844: modules] Error 2 make[1]: *** [/home/masahiro/workspace/linux-kbuild/Makefile:350: __build_one_by_one] Error 2 make: *** [Makefile:234: __sub-make] Error 2 Signed-off-by: Masahiro Yamada Fixes: baa25b571a16 ("powerpc/64: Do not link crtsavres.o in vmlinux") Reviewed-by: Nicholas Piggin Signed-off-by: Michael Ellerman Link: https://msgid.link/20231120232332.4100288-1-masahiroy@kernel.org Signed-off-by: Sasha Levin --- arch/powerpc/lib/Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 0697a0e014ae..321cab5c3ea0 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -38,7 +38,7 @@ obj-$(CONFIG_FUNCTION_ERROR_INJECTION) += error-inject.o # so it is only needed for modules, and only for older linkers which # do not support --save-restore-funcs ifeq ($(call ld-ifversion, -lt, 225000000, y),y) -extra-$(CONFIG_PPC64) += crtsavres.o +always-$(CONFIG_PPC64) += crtsavres.o endif obj-$(CONFIG_PPC_BOOK3S_64) += copyuser_power7.o copypage_power7.o \ From d67339e9c81ed603f97501f62d1a2ab3f24f925b Mon Sep 17 00:00:00 2001 From: Christophe Leroy Date: Sun, 27 Jun 2021 17:09:18 +0000 Subject: [PATCH 052/288] powerpc: Remove in_kernel_text() [ Upstream commit 09ca497528dac12cbbceab8197011c875a96d053 ] Last user of in_kernel_text() stopped using in with commit 549e8152de80 ("powerpc: Make the 64-bit kernel as a position-independent executable"). Generic function is_kernel_text() does the same. So remote it. Signed-off-by: Christophe Leroy Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/2a3a5b6f8cc0ef4e854d7b764f66aa8d2ee270d2.1624813698.git.christophe.leroy@csgroup.eu Stable-dep-of: 1b1e38002648 ("powerpc: add crtsavres.o to always-y instead of extra-y") Signed-off-by: Sasha Levin --- arch/powerpc/include/asm/sections.h | 8 -------- 1 file changed, 8 deletions(-) diff --git a/arch/powerpc/include/asm/sections.h b/arch/powerpc/include/asm/sections.h index 324d7b298ec3..6e4af4492a14 100644 --- a/arch/powerpc/include/asm/sections.h +++ b/arch/powerpc/include/asm/sections.h @@ -38,14 +38,6 @@ extern char start_virt_trampolines[]; extern char end_virt_trampolines[]; #endif -static inline int in_kernel_text(unsigned long addr) -{ - if (addr >= (unsigned long)_stext && addr < (unsigned long)__init_end) - return 1; - - return 0; -} - static inline unsigned long kernel_toc_addr(void) { /* Defined by the linker, see vmlinux.lds.S */ From 81dce186f1dd6429d6b9f9e10575b53c33e39ab2 Mon Sep 17 00:00:00 2001 From: Randy Dunlap Date: Thu, 30 Nov 2023 21:51:59 -0800 Subject: [PATCH 053/288] powerpc/44x: select I2C for CURRITUCK [ Upstream commit 4a74197b65e69c46fe6e53f7df2f4d6ce9ffe012 ] Fix build errors when CURRITUCK=y and I2C is not builtin (=m or is not set). Fixes these build errors: powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `avr_halt_system': ppc476.c:(.text+0x58): undefined reference to `i2c_smbus_write_byte_data' powerpc-linux-ld: arch/powerpc/platforms/44x/ppc476.o: in function `ppc47x_device_probe': ppc476.c:(.init.text+0x18): undefined reference to `i2c_register_driver' Fixes: 2a2c74b2efcb ("IBM Akebono: Add the Akebono platform") Signed-off-by: Randy Dunlap Reported-by: kernel test robot Closes: lore.kernel.org/r/202312010820.cmdwF5X9-lkp@intel.com Signed-off-by: Michael Ellerman Link: https://msgid.link/20231201055159.8371-1-rdunlap@infradead.org Signed-off-by: Sasha Levin --- arch/powerpc/platforms/44x/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 78ac6d67a935..9bc852c7e92f 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -177,6 +177,7 @@ config ISS4xx config CURRITUCK bool "IBM Currituck (476fpe) Support" depends on PPC_47x + select I2C select SWIOTLB select 476FPE select FORCE_PCI From f2ec41874b650028e7bc11ef44f18a5b4065843f Mon Sep 17 00:00:00 2001 From: Laurent Dufour Date: Fri, 11 Dec 2020 15:59:54 +0100 Subject: [PATCH 054/288] powerpc/pseries/memhotplug: Quieten some DLPAR operations [ Upstream commit 20e9de85edae3a5866f29b6cce87c9ec66d62a1b ] When attempting to remove by index a set of LMBs a lot of messages are displayed on the console, even when everything goes fine: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 8000002d Offlined Pages 4096 pseries-hotplug-mem: Memory at 2d0000000 was hot-removed The 2 messages prefixed by "pseries-hotplug-mem" are not really helpful for the end user, they should be debug outputs. In case of error, because some of the LMB's pages couldn't be offlined, the following is displayed on the console: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 8000003e pseries-hotplug-mem: Failed to hot-remove memory at 3e0000000 dlpar: Could not handle DLPAR request "memory remove index 0x8000003e" Again, the 2 messages prefixed by "pseries-hotplug-mem" are useless, and the generic DLPAR prefixed message should be enough. These 2 first changes are mainly triggered by the changes introduced in drmgr: https://groups.google.com/g/powerpc-utils-devel/c/Y6ef4NB3EzM/m/9cu5JHRxAQAJ Also, when adding a bunch of LMBs, a message is displayed in the console per LMB like these ones: pseries-hotplug-mem: Memory at 7e0000000 (drc index 8000007e) was hot-added pseries-hotplug-mem: Memory at 7f0000000 (drc index 8000007f) was hot-added pseries-hotplug-mem: Memory at 800000000 (drc index 80000080) was hot-added pseries-hotplug-mem: Memory at 810000000 (drc index 80000081) was hot-added When adding 1TB of memory and LMB size is 256MB, this leads to 4096 messages to be displayed on the console. These messages are not really helpful for the end user, so moving them to the DEBUG level. Signed-off-by: Laurent Dufour [mpe: Tweak change log wording] Signed-off-by: Michael Ellerman Link: https://lore.kernel.org/r/20201211145954.90143-1-ldufour@linux.ibm.com Stable-dep-of: bd68ffce69f6 ("powerpc/pseries/memhp: Fix access beyond end of drmem array") Signed-off-by: Sasha Levin --- arch/powerpc/platforms/pseries/hotplug-memory.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index a5f968b5fa3a..0e602c3b01ea 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -481,7 +481,7 @@ static int dlpar_memory_remove_by_index(u32 drc_index) int lmb_found; int rc; - pr_info("Attempting to hot-remove LMB, drc index %x\n", drc_index); + pr_debug("Attempting to hot-remove LMB, drc index %x\n", drc_index); lmb_found = 0; for_each_drmem_lmb(lmb) { @@ -499,10 +499,10 @@ static int dlpar_memory_remove_by_index(u32 drc_index) rc = -EINVAL; if (rc) - pr_info("Failed to hot-remove memory at %llx\n", - lmb->base_addr); + pr_debug("Failed to hot-remove memory at %llx\n", + lmb->base_addr); else - pr_info("Memory at %llx was hot-removed\n", lmb->base_addr); + pr_debug("Memory at %llx was hot-removed\n", lmb->base_addr); return rc; } @@ -719,8 +719,8 @@ static int dlpar_memory_add_by_count(u32 lmbs_to_add) if (!drmem_lmb_reserved(lmb)) continue; - pr_info("Memory at %llx (drc index %x) was hot-added\n", - lmb->base_addr, lmb->drc_index); + pr_debug("Memory at %llx (drc index %x) was hot-added\n", + lmb->base_addr, lmb->drc_index); drmem_remove_lmb_reservation(lmb); } rc = 0; From b582aa1f66411d4adcc1aa55b8c575683fb4687e Mon Sep 17 00:00:00 2001 From: Nathan Lynch Date: Tue, 14 Nov 2023 11:01:53 -0600 Subject: [PATCH 055/288] powerpc/pseries/memhp: Fix access beyond end of drmem array [ Upstream commit bd68ffce69f6cf8ddd3a3c32549d1d2275e49fc5 ] dlpar_memory_remove_by_index() may access beyond the bounds of the drmem lmb array when the LMB lookup fails to match an entry with the given DRC index. When the search fails, the cursor is left pointing to &drmem_info->lmbs[drmem_info->n_lmbs], which is one element past the last valid entry in the array. The debug message at the end of the function then dereferences this pointer: pr_debug("Failed to hot-remove memory at %llx\n", lmb->base_addr); This was found by inspection and confirmed with KASAN: pseries-hotplug-mem: Attempting to hot-remove LMB, drc index 1234 ================================================================== BUG: KASAN: slab-out-of-bounds in dlpar_memory+0x298/0x1658 Read of size 8 at addr c000000364e97fd0 by task bash/949 dump_stack_lvl+0xa4/0xfc (unreliable) print_report+0x214/0x63c kasan_report+0x140/0x2e0 __asan_load8+0xa8/0xe0 dlpar_memory+0x298/0x1658 handle_dlpar_errorlog+0x130/0x1d0 dlpar_store+0x18c/0x3e0 kobj_attr_store+0x68/0xa0 sysfs_kf_write+0xc4/0x110 kernfs_fop_write_iter+0x26c/0x390 vfs_write+0x2d4/0x4e0 ksys_write+0xac/0x1a0 system_call_exception+0x268/0x530 system_call_vectored_common+0x15c/0x2ec Allocated by task 1: kasan_save_stack+0x48/0x80 kasan_set_track+0x34/0x50 kasan_save_alloc_info+0x34/0x50 __kasan_kmalloc+0xd0/0x120 __kmalloc+0x8c/0x320 kmalloc_array.constprop.0+0x48/0x5c drmem_init+0x2a0/0x41c do_one_initcall+0xe0/0x5c0 kernel_init_freeable+0x4ec/0x5a0 kernel_init+0x30/0x1e0 ret_from_kernel_user_thread+0x14/0x1c The buggy address belongs to the object at c000000364e80000 which belongs to the cache kmalloc-128k of size 131072 The buggy address is located 0 bytes to the right of allocated 98256-byte region [c000000364e80000, c000000364e97fd0) ================================================================== pseries-hotplug-mem: Failed to hot-remove memory at 0 Log failed lookups with a separate message and dereference the cursor only when it points to a valid entry. Signed-off-by: Nathan Lynch Fixes: 51925fb3c5c9 ("powerpc/pseries: Implement memory hotplug remove in the kernel") Signed-off-by: Michael Ellerman Link: https://msgid.link/20231114-pseries-memhp-fixes-v1-1-fb8f2bb7c557@linux.ibm.com Signed-off-by: Sasha Levin --- arch/powerpc/platforms/pseries/hotplug-memory.c | 9 +++++---- 1 file changed, 5 insertions(+), 4 deletions(-) diff --git a/arch/powerpc/platforms/pseries/hotplug-memory.c b/arch/powerpc/platforms/pseries/hotplug-memory.c index 0e602c3b01ea..96dd82d63e98 100644 --- a/arch/powerpc/platforms/pseries/hotplug-memory.c +++ b/arch/powerpc/platforms/pseries/hotplug-memory.c @@ -495,14 +495,15 @@ static int dlpar_memory_remove_by_index(u32 drc_index) } } - if (!lmb_found) + if (!lmb_found) { + pr_debug("Failed to look up LMB for drc index %x\n", drc_index); rc = -EINVAL; - - if (rc) + } else if (rc) { pr_debug("Failed to hot-remove memory at %llx\n", lmb->base_addr); - else + } else { pr_debug("Memory at %llx was hot-removed\n", lmb->base_addr); + } return rc; } From 428ab6a9dda521ce97f8ff98a1b2e8e5e3e1dc92 Mon Sep 17 00:00:00 2001 From: Michael Ellerman Date: Wed, 29 Nov 2023 00:27:44 +1100 Subject: [PATCH 056/288] selftests/powerpc: Fix error handling in FPU/VMX preemption tests [ Upstream commit 9dbd5927408c4a0707de73ae9dd9306b184e8fee ] The FPU & VMX preemption tests do not check for errors returned by the low-level asm routines, preempt_fpu() / preempt_vsx() respectively. That means any register corruption detected by the asm routines does not result in a test failure. Fix it by returning the return value of the asm routines from the pthread child routines. Fixes: e5ab8be68e44 ("selftests/powerpc: Test preservation of FPU and VMX regs across preemption") Signed-off-by: Michael Ellerman Link: https://msgid.link/20231128132748.1990179-1-mpe@ellerman.id.au Signed-off-by: Sasha Levin --- tools/testing/selftests/powerpc/math/fpu_preempt.c | 9 +++++---- tools/testing/selftests/powerpc/math/vmx_preempt.c | 10 ++++++---- 2 files changed, 11 insertions(+), 8 deletions(-) diff --git a/tools/testing/selftests/powerpc/math/fpu_preempt.c b/tools/testing/selftests/powerpc/math/fpu_preempt.c index 5235bdc8c0b1..3e5b5663d244 100644 --- a/tools/testing/selftests/powerpc/math/fpu_preempt.c +++ b/tools/testing/selftests/powerpc/math/fpu_preempt.c @@ -37,19 +37,20 @@ __thread double darray[] = {0.1, 0.2, 0.3, 0.4, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, int threads_starting; int running; -extern void preempt_fpu(double *darray, int *threads_starting, int *running); +extern int preempt_fpu(double *darray, int *threads_starting, int *running); void *preempt_fpu_c(void *p) { + long rc; int i; + srand(pthread_self()); for (i = 0; i < 21; i++) darray[i] = rand(); - /* Test failed if it ever returns */ - preempt_fpu(darray, &threads_starting, &running); + rc = preempt_fpu(darray, &threads_starting, &running); - return p; + return (void *)rc; } int test_preempt_fpu(void) diff --git a/tools/testing/selftests/powerpc/math/vmx_preempt.c b/tools/testing/selftests/powerpc/math/vmx_preempt.c index 6761d6ce30ec..6f7cf400c687 100644 --- a/tools/testing/selftests/powerpc/math/vmx_preempt.c +++ b/tools/testing/selftests/powerpc/math/vmx_preempt.c @@ -37,19 +37,21 @@ __thread vector int varray[] = {{1, 2, 3, 4}, {5, 6, 7, 8}, {9, 10,11,12}, int threads_starting; int running; -extern void preempt_vmx(vector int *varray, int *threads_starting, int *running); +extern int preempt_vmx(vector int *varray, int *threads_starting, int *running); void *preempt_vmx_c(void *p) { int i, j; + long rc; + srand(pthread_self()); for (i = 0; i < 12; i++) for (j = 0; j < 4; j++) varray[i][j] = rand(); - /* Test fails if it ever returns */ - preempt_vmx(varray, &threads_starting, &running); - return p; + rc = preempt_vmx(varray, &threads_starting, &running); + + return (void *)rc; } int test_preempt_vmx(void) From 1eefa93faf69188540b08b024794fa90b1d82e8b Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Fri, 8 Dec 2023 16:59:37 +0800 Subject: [PATCH 057/288] powerpc/powernv: Add a null pointer check to scom_debug_init_one() [ Upstream commit 9a260f2dd827bbc82cc60eb4f4d8c22707d80742 ] kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Add a null pointer check, and release 'ent' to avoid memory leaks. Fixes: bfd2f0d49aef ("powerpc/powernv: Get rid of old scom_controller abstraction") Signed-off-by: Kunwu Chan Signed-off-by: Michael Ellerman Link: https://msgid.link/20231208085937.107210-1-chentao@kylinos.cn Signed-off-by: Sasha Levin --- arch/powerpc/platforms/powernv/opal-xscom.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/powerpc/platforms/powernv/opal-xscom.c b/arch/powerpc/platforms/powernv/opal-xscom.c index fd510d961b8c..d5814c5046ba 100644 --- a/arch/powerpc/platforms/powernv/opal-xscom.c +++ b/arch/powerpc/platforms/powernv/opal-xscom.c @@ -165,6 +165,11 @@ static int scom_debug_init_one(struct dentry *root, struct device_node *dn, ent->chip = chip; snprintf(ent->name, 16, "%08x", chip); ent->path.data = (void *)kasprintf(GFP_KERNEL, "%pOF", dn); + if (!ent->path.data) { + kfree(ent); + return -ENOMEM; + } + ent->path.size = strlen((char *)ent->path.data); dir = debugfs_create_dir(ent->name, root); From e6ad05e3ae9c84c5a71d7bb2d44dc845ae7990cf Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Mon, 27 Nov 2023 11:07:55 +0800 Subject: [PATCH 058/288] powerpc/powernv: Add a null pointer check in opal_event_init() [ Upstream commit 8649829a1dd25199bbf557b2621cedb4bf9b3050 ] kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fixes: 2717a33d6074 ("powerpc/opal-irqchip: Use interrupt names if present") Signed-off-by: Kunwu Chan Signed-off-by: Michael Ellerman Link: https://msgid.link/20231127030755.1546750-1-chentao@kylinos.cn Signed-off-by: Sasha Levin --- arch/powerpc/platforms/powernv/opal-irqchip.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/arch/powerpc/platforms/powernv/opal-irqchip.c b/arch/powerpc/platforms/powernv/opal-irqchip.c index c164419e254d..dcec0f760c8f 100644 --- a/arch/powerpc/platforms/powernv/opal-irqchip.c +++ b/arch/powerpc/platforms/powernv/opal-irqchip.c @@ -278,6 +278,8 @@ int __init opal_event_init(void) else name = kasprintf(GFP_KERNEL, "opal"); + if (!name) + continue; /* Install interrupt handler */ rc = request_irq(r->start, opal_interrupt, r->flags & IRQD_TRIGGER_MASK, name, NULL); From a67a04ad05acb56640798625e73fa54d6d41cce1 Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Sun, 26 Nov 2023 17:57:39 +0800 Subject: [PATCH 059/288] powerpc/powernv: Add a null pointer check in opal_powercap_init() [ Upstream commit e123015c0ba859cf48aa7f89c5016cc6e98e018d ] kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fixes: b9ef7b4b867f ("powerpc: Convert to using %pOFn instead of device_node.name") Signed-off-by: Kunwu Chan Signed-off-by: Michael Ellerman Link: https://msgid.link/20231126095739.1501990-1-chentao@kylinos.cn Signed-off-by: Sasha Levin --- arch/powerpc/platforms/powernv/opal-powercap.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/powerpc/platforms/powernv/opal-powercap.c b/arch/powerpc/platforms/powernv/opal-powercap.c index c16d44f6f1d1..ce9ec3962cef 100644 --- a/arch/powerpc/platforms/powernv/opal-powercap.c +++ b/arch/powerpc/platforms/powernv/opal-powercap.c @@ -196,6 +196,12 @@ void __init opal_powercap_init(void) j = 0; pcaps[i].pg.name = kasprintf(GFP_KERNEL, "%pOFn", node); + if (!pcaps[i].pg.name) { + kfree(pcaps[i].pattrs); + kfree(pcaps[i].pg.attrs); + goto out_pcaps_pattrs; + } + if (has_min) { powercap_add_attr(min, "powercap-min", &pcaps[i].pattrs[j]); From 5a669f3511d273c8c1ab1c1d268fbcdf53fc7a05 Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Sun, 26 Nov 2023 17:37:19 +0800 Subject: [PATCH 060/288] powerpc/imc-pmu: Add a null pointer check in update_events_in_group() [ Upstream commit 0a233867a39078ebb0f575e2948593bbff5826b3 ] kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fixes: 885dcd709ba9 ("powerpc/perf: Add nest IMC PMU support") Signed-off-by: Kunwu Chan Signed-off-by: Michael Ellerman Link: https://msgid.link/20231126093719.1440305-1-chentao@kylinos.cn Signed-off-by: Sasha Levin --- arch/powerpc/perf/imc-pmu.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/arch/powerpc/perf/imc-pmu.c b/arch/powerpc/perf/imc-pmu.c index 3e15d0d054b2..5464c87511fa 100644 --- a/arch/powerpc/perf/imc-pmu.c +++ b/arch/powerpc/perf/imc-pmu.c @@ -292,6 +292,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu) attr_group->attrs = attrs; do { ev_val_str = kasprintf(GFP_KERNEL, "event=0x%x", pmu->events[i].value); + if (!ev_val_str) + continue; dev_str = device_str_attr_create(pmu->events[i].name, ev_val_str); if (!dev_str) continue; @@ -299,6 +301,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu) attrs[j++] = dev_str; if (pmu->events[i].scale) { ev_scale_str = kasprintf(GFP_KERNEL, "%s.scale", pmu->events[i].name); + if (!ev_scale_str) + continue; dev_str = device_str_attr_create(ev_scale_str, pmu->events[i].scale); if (!dev_str) continue; @@ -308,6 +312,8 @@ static int update_events_in_group(struct device_node *node, struct imc_pmu *pmu) if (pmu->events[i].unit) { ev_unit_str = kasprintf(GFP_KERNEL, "%s.unit", pmu->events[i].name); + if (!ev_unit_str) + continue; dev_str = device_str_attr_create(ev_unit_str, pmu->events[i].unit); if (!dev_str) continue; From f8df7c9886dbdc618ae78505c1cebf57d7353aa3 Mon Sep 17 00:00:00 2001 From: Amit Kumar Mahapatra Date: Mon, 6 Nov 2023 20:23:55 +0530 Subject: [PATCH 061/288] spi: spi-zynqmp-gqspi: fix driver kconfig dependencies [ Upstream commit 424a8166764e462258fdccaaefbdeb07517c8b21 ] ZynqMP GQSPI driver no longer uses spi-master framework. It had been converted to use spi-mem framework. So remove driver dependency from spi-master and replace it with spi-mem. Fixes: 1c26372e5aa9 ("spi: spi-zynqmp-gqspi: Update driver to use spi-mem framework") Signed-off-by: Amit Kumar Mahapatra Signed-off-by: Radhey Shyam Pandey Link: https://lore.kernel.org/r/1699282435-884917-1-git-send-email-radhey.shyam.pandey@amd.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/Kconfig | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 5fd9b515f6f1..74ea6b6b5f74 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -957,9 +957,10 @@ config SPI_ZYNQ_QSPI config SPI_ZYNQMP_GQSPI tristate "Xilinx ZynqMP GQSPI controller" - depends on (SPI_MASTER && HAS_DMA) || COMPILE_TEST + depends on (SPI_MEM && HAS_DMA) || COMPILE_TEST help Enables Xilinx GQSPI controller driver for Zynq UltraScale+ MPSoC. + This controller only supports SPI memory interface. config SPI_AMD tristate "AMD SPI controller" From 11ac297aba78e7f29c8344c4e0b02620bc23c446 Mon Sep 17 00:00:00 2001 From: Ronald Monthero Date: Sat, 18 Nov 2023 18:31:51 +1000 Subject: [PATCH 062/288] mtd: rawnand: Increment IFC_TIMEOUT_MSECS for nand controller response [ Upstream commit 923fb6238cb3ac529aa2bf13b3b1e53762186a8b ] Under heavy load it is likely that the controller is done with its own task but the thread unlocking the wait is not scheduled in time. Increasing IFC_TIMEOUT_MSECS allows the controller to respond within allowable timeslice of 1 sec. fsl,ifc-nand 7e800000.nand: Controller is not responding [<804b2047>] (nand_get_device) from [<804b5335>] (nand_write_oob+0x1b/0x4a) [<804b5335>] (nand_write_oob) from [<804a3585>] (mtd_write+0x41/0x5c) [<804a3585>] (mtd_write) from [<804c1d47>] (ubi_io_write+0x17f/0x22c) [<804c1d47>] (ubi_io_write) from [<804c047b>] (ubi_eba_write_leb+0x5b/0x1d0) Fixes: 82771882d960 ("NAND Machine support for Integrated Flash Controller") Reviewed-by: Miquel Raynal Reviewed-by: Andy Shevchenko Signed-off-by: Ronald Monthero Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20231118083156.776887-1-debug.penguin32@gmail.com Signed-off-by: Sasha Levin --- drivers/mtd/nand/raw/fsl_ifc_nand.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/mtd/nand/raw/fsl_ifc_nand.c b/drivers/mtd/nand/raw/fsl_ifc_nand.c index e345f9d9f8e8..fcda744e8a40 100644 --- a/drivers/mtd/nand/raw/fsl_ifc_nand.c +++ b/drivers/mtd/nand/raw/fsl_ifc_nand.c @@ -21,7 +21,7 @@ #define ERR_BYTE 0xFF /* Value returned for read bytes when read failed */ -#define IFC_TIMEOUT_MSECS 500 /* Maximum number of mSecs to wait +#define IFC_TIMEOUT_MSECS 1000 /* Maximum timeout to wait for IFC NAND Machine */ struct fsl_ifc_ctrl; From c4e1a0ef0b4782854c9b77a333ca912b392bed2f Mon Sep 17 00:00:00 2001 From: Nikita Kiryushin Date: Thu, 9 Nov 2023 16:49:25 +0300 Subject: [PATCH 063/288] ACPI: video: check for error while searching for backlight device parent [ Upstream commit ccd45faf4973746c4f30ea41eec864e5cf191099 ] If acpi_get_parent() called in acpi_video_dev_register_backlight() fails, for example, because acpi_ut_acquire_mutex() fails inside acpi_get_parent), this can lead to incorrect (uninitialized) acpi_parent handle being passed to acpi_get_pci_dev() for detecting the parent pci device. Check acpi_get_parent() result and set parent device only in case of success. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 9661e92c10a9 ("acpi: tie ACPI backlight devices to PCI devices if possible") Signed-off-by: Nikita Kiryushin Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin --- drivers/acpi/acpi_video.c | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/acpi/acpi_video.c b/drivers/acpi/acpi_video.c index cf6c9ffe04a2..9d384656323a 100644 --- a/drivers/acpi/acpi_video.c +++ b/drivers/acpi/acpi_video.c @@ -1788,12 +1788,12 @@ static void acpi_video_dev_register_backlight(struct acpi_video_device *device) return; count++; - acpi_get_parent(device->dev->handle, &acpi_parent); - - pdev = acpi_get_pci_dev(acpi_parent); - if (pdev) { - parent = &pdev->dev; - pci_dev_put(pdev); + if (ACPI_SUCCESS(acpi_get_parent(device->dev->handle, &acpi_parent))) { + pdev = acpi_get_pci_dev(acpi_parent); + if (pdev) { + parent = &pdev->dev; + pci_dev_put(pdev); + } } memset(&props, 0, sizeof(struct backlight_properties)); From f39c3d578c7d09a18ceaf56750fc7f20b02ada63 Mon Sep 17 00:00:00 2001 From: Nikita Kiryushin Date: Thu, 9 Nov 2023 21:08:59 +0300 Subject: [PATCH 064/288] ACPI: LPIT: Avoid u32 multiplication overflow [ Upstream commit 56d2eeda87995245300836ee4dbd13b002311782 ] In lpit_update_residency() there is a possibility of overflow in multiplication, if tsc_khz is large enough (> UINT_MAX/1000). Change multiplication to mul_u32_u32(). Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: eeb2d80d502a ("ACPI / LPIT: Add Low Power Idle Table (LPIT) support") Signed-off-by: Nikita Kiryushin Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin --- drivers/acpi/acpi_lpit.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/acpi/acpi_lpit.c b/drivers/acpi/acpi_lpit.c index 48e5059d67ca..7de59730030c 100644 --- a/drivers/acpi/acpi_lpit.c +++ b/drivers/acpi/acpi_lpit.c @@ -98,7 +98,7 @@ static void lpit_update_residency(struct lpit_residency_info *info, struct acpi_lpit_native *lpit_native) { info->frequency = lpit_native->counter_frequency ? - lpit_native->counter_frequency : tsc_khz * 1000; + lpit_native->counter_frequency : mul_u32_u32(tsc_khz, 1000U); if (!info->frequency) info->frequency = 1; From ded221bf4c74ef1e144f82109f2c8b8210d03937 Mon Sep 17 00:00:00 2001 From: Michael Walle Date: Tue, 18 Jan 2022 18:35:03 +0100 Subject: [PATCH 065/288] of: property: define of_property_read_u{8,16,32,64}_array() unconditionally [ Upstream commit 2ca42c3ad9ed875b136065b010753a4caaaa1d38 ] We can get rid of all the empty stubs because all these functions call of_property_read_variable_u{8,16,32,64}_array() which already have an empty stub if CONFIG_OF is not defined. Signed-off-by: Michael Walle Signed-off-by: Rob Herring Link: https://lore.kernel.org/r/20220118173504.2867523-3-michael@walle.cc Stable-dep-of: c4a5118a3ae1 ("cpufreq: scmi: process the result of devm_of_clk_add_hw_provider()") Signed-off-by: Sasha Levin --- include/linux/of.h | 274 ++++++++++++++++++++------------------------- 1 file changed, 124 insertions(+), 150 deletions(-) diff --git a/include/linux/of.h b/include/linux/of.h index 57f2d3dddc0c..13d6243d202d 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -415,130 +415,6 @@ extern int of_detach_node(struct device_node *); #define of_match_ptr(_ptr) (_ptr) -/** - * of_property_read_u8_array - Find and read an array of u8 from a property. - * - * @np: device node from which the property value is to be read. - * @propname: name of the property to be searched. - * @out_values: pointer to return value, modified only if return value is 0. - * @sz: number of array elements to read - * - * Search for a property in a device node and read 8-bit value(s) from - * it. - * - * dts entry of array should be like: - * ``property = /bits/ 8 <0x50 0x60 0x70>;`` - * - * Return: 0 on success, -EINVAL if the property does not exist, - * -ENODATA if property does not have a value, and -EOVERFLOW if the - * property data isn't large enough. - * - * The out_values is modified only if a valid u8 value can be decoded. - */ -static inline int of_property_read_u8_array(const struct device_node *np, - const char *propname, - u8 *out_values, size_t sz) -{ - int ret = of_property_read_variable_u8_array(np, propname, out_values, - sz, 0); - if (ret >= 0) - return 0; - else - return ret; -} - -/** - * of_property_read_u16_array - Find and read an array of u16 from a property. - * - * @np: device node from which the property value is to be read. - * @propname: name of the property to be searched. - * @out_values: pointer to return value, modified only if return value is 0. - * @sz: number of array elements to read - * - * Search for a property in a device node and read 16-bit value(s) from - * it. - * - * dts entry of array should be like: - * ``property = /bits/ 16 <0x5000 0x6000 0x7000>;`` - * - * Return: 0 on success, -EINVAL if the property does not exist, - * -ENODATA if property does not have a value, and -EOVERFLOW if the - * property data isn't large enough. - * - * The out_values is modified only if a valid u16 value can be decoded. - */ -static inline int of_property_read_u16_array(const struct device_node *np, - const char *propname, - u16 *out_values, size_t sz) -{ - int ret = of_property_read_variable_u16_array(np, propname, out_values, - sz, 0); - if (ret >= 0) - return 0; - else - return ret; -} - -/** - * of_property_read_u32_array - Find and read an array of 32 bit integers - * from a property. - * - * @np: device node from which the property value is to be read. - * @propname: name of the property to be searched. - * @out_values: pointer to return value, modified only if return value is 0. - * @sz: number of array elements to read - * - * Search for a property in a device node and read 32-bit value(s) from - * it. - * - * Return: 0 on success, -EINVAL if the property does not exist, - * -ENODATA if property does not have a value, and -EOVERFLOW if the - * property data isn't large enough. - * - * The out_values is modified only if a valid u32 value can be decoded. - */ -static inline int of_property_read_u32_array(const struct device_node *np, - const char *propname, - u32 *out_values, size_t sz) -{ - int ret = of_property_read_variable_u32_array(np, propname, out_values, - sz, 0); - if (ret >= 0) - return 0; - else - return ret; -} - -/** - * of_property_read_u64_array - Find and read an array of 64 bit integers - * from a property. - * - * @np: device node from which the property value is to be read. - * @propname: name of the property to be searched. - * @out_values: pointer to return value, modified only if return value is 0. - * @sz: number of array elements to read - * - * Search for a property in a device node and read 64-bit value(s) from - * it. - * - * Return: 0 on success, -EINVAL if the property does not exist, - * -ENODATA if property does not have a value, and -EOVERFLOW if the - * property data isn't large enough. - * - * The out_values is modified only if a valid u64 value can be decoded. - */ -static inline int of_property_read_u64_array(const struct device_node *np, - const char *propname, - u64 *out_values, size_t sz) -{ - int ret = of_property_read_variable_u64_array(np, propname, out_values, - sz, 0); - if (ret >= 0) - return 0; - else - return ret; -} - /* * struct property *prop; * const __be32 *p; @@ -726,32 +602,6 @@ static inline int of_property_count_elems_of_size(const struct device_node *np, return -ENOSYS; } -static inline int of_property_read_u8_array(const struct device_node *np, - const char *propname, u8 *out_values, size_t sz) -{ - return -ENOSYS; -} - -static inline int of_property_read_u16_array(const struct device_node *np, - const char *propname, u16 *out_values, size_t sz) -{ - return -ENOSYS; -} - -static inline int of_property_read_u32_array(const struct device_node *np, - const char *propname, - u32 *out_values, size_t sz) -{ - return -ENOSYS; -} - -static inline int of_property_read_u64_array(const struct device_node *np, - const char *propname, - u64 *out_values, size_t sz) -{ - return -ENOSYS; -} - static inline int of_property_read_u32_index(const struct device_node *np, const char *propname, u32 index, u32 *out_value) { @@ -1223,6 +1073,130 @@ static inline bool of_property_read_bool(const struct device_node *np, return prop ? true : false; } +/** + * of_property_read_u8_array - Find and read an array of u8 from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_values: pointer to return value, modified only if return value is 0. + * @sz: number of array elements to read + * + * Search for a property in a device node and read 8-bit value(s) from + * it. + * + * dts entry of array should be like: + * ``property = /bits/ 8 <0x50 0x60 0x70>;`` + * + * Return: 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_values is modified only if a valid u8 value can be decoded. + */ +static inline int of_property_read_u8_array(const struct device_node *np, + const char *propname, + u8 *out_values, size_t sz) +{ + int ret = of_property_read_variable_u8_array(np, propname, out_values, + sz, 0); + if (ret >= 0) + return 0; + else + return ret; +} + +/** + * of_property_read_u16_array - Find and read an array of u16 from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_values: pointer to return value, modified only if return value is 0. + * @sz: number of array elements to read + * + * Search for a property in a device node and read 16-bit value(s) from + * it. + * + * dts entry of array should be like: + * ``property = /bits/ 16 <0x5000 0x6000 0x7000>;`` + * + * Return: 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_values is modified only if a valid u16 value can be decoded. + */ +static inline int of_property_read_u16_array(const struct device_node *np, + const char *propname, + u16 *out_values, size_t sz) +{ + int ret = of_property_read_variable_u16_array(np, propname, out_values, + sz, 0); + if (ret >= 0) + return 0; + else + return ret; +} + +/** + * of_property_read_u32_array - Find and read an array of 32 bit integers + * from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_values: pointer to return value, modified only if return value is 0. + * @sz: number of array elements to read + * + * Search for a property in a device node and read 32-bit value(s) from + * it. + * + * Return: 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_values is modified only if a valid u32 value can be decoded. + */ +static inline int of_property_read_u32_array(const struct device_node *np, + const char *propname, + u32 *out_values, size_t sz) +{ + int ret = of_property_read_variable_u32_array(np, propname, out_values, + sz, 0); + if (ret >= 0) + return 0; + else + return ret; +} + +/** + * of_property_read_u64_array - Find and read an array of 64 bit integers + * from a property. + * + * @np: device node from which the property value is to be read. + * @propname: name of the property to be searched. + * @out_values: pointer to return value, modified only if return value is 0. + * @sz: number of array elements to read + * + * Search for a property in a device node and read 64-bit value(s) from + * it. + * + * Return: 0 on success, -EINVAL if the property does not exist, + * -ENODATA if property does not have a value, and -EOVERFLOW if the + * property data isn't large enough. + * + * The out_values is modified only if a valid u64 value can be decoded. + */ +static inline int of_property_read_u64_array(const struct device_node *np, + const char *propname, + u64 *out_values, size_t sz) +{ + int ret = of_property_read_variable_u64_array(np, propname, out_values, + sz, 0); + if (ret >= 0) + return 0; + else + return ret; +} + static inline int of_property_read_u8(const struct device_node *np, const char *propname, u8 *out_value) From ba7c7e353041f68df7e0fc4091abced60c01e7b4 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Thu, 9 Feb 2023 15:35:01 -0600 Subject: [PATCH 066/288] of: Add of_property_present() helper [ Upstream commit 9cbad37ce8122de32a1529e394b468bc101c9e7f ] Add an of_property_present() function similar to fwnode_property_present(). of_property_read_bool() could be used directly, but it is cleaner to not use it on non-boolean properties. Reviewed-by: Frank Rowand Tested-by: Frank Rowand Link: https://lore.kernel.org/all/20230215215547.691573-1-robh@kernel.org/ Signed-off-by: Rob Herring Stable-dep-of: c4a5118a3ae1 ("cpufreq: scmi: process the result of devm_of_clk_add_hw_provider()") Signed-off-by: Sasha Levin --- include/linux/of.h | 17 ++++++++++++++++- 1 file changed, 16 insertions(+), 1 deletion(-) diff --git a/include/linux/of.h b/include/linux/of.h index 13d6243d202d..4ed8dce624e7 100644 --- a/include/linux/of.h +++ b/include/linux/of.h @@ -1061,7 +1061,8 @@ static inline int of_property_read_string_index(const struct device_node *np, * @np: device node from which the property value is to be read. * @propname: name of the property to be searched. * - * Search for a property in a device node. + * Search for a boolean property in a device node. Usage on non-boolean + * property types is deprecated. * * Return: true if the property exists false otherwise. */ @@ -1073,6 +1074,20 @@ static inline bool of_property_read_bool(const struct device_node *np, return prop ? true : false; } +/** + * of_property_present - Test if a property is present in a node + * @np: device node to search for the property. + * @propname: name of the property to be searched. + * + * Test for a property present in a device node. + * + * Return: true if the property exists false otherwise. + */ +static inline bool of_property_present(const struct device_node *np, const char *propname) +{ + return of_property_read_bool(np, propname); +} + /** * of_property_read_u8_array - Find and read an array of u8 from a property. * From fda1309205844fadfaae7ab5fc1f393aad9081d9 Mon Sep 17 00:00:00 2001 From: Rob Herring Date: Fri, 10 Mar 2023 08:47:02 -0600 Subject: [PATCH 067/288] cpufreq: Use of_property_present() for testing DT property presence [ Upstream commit b8f3a396a7ee43e6079176cc0fb8de2b95a23681 ] It is preferred to use typed property access functions (i.e. of_property_read_ functions) rather than low-level of_get_property/of_find_property functions for reading properties. As part of this, convert of_get_property/of_find_property calls to the recently added of_property_present() helper when we just want to test for presence of a property and nothing more. Signed-off-by: Rob Herring Signed-off-by: Viresh Kumar Stable-dep-of: c4a5118a3ae1 ("cpufreq: scmi: process the result of devm_of_clk_add_hw_provider()") Signed-off-by: Sasha Levin --- drivers/cpufreq/cpufreq-dt-platdev.c | 2 +- drivers/cpufreq/imx-cpufreq-dt.c | 2 +- drivers/cpufreq/imx6q-cpufreq.c | 4 ++-- drivers/cpufreq/scmi-cpufreq.c | 2 +- drivers/cpufreq/tegra20-cpufreq.c | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-) diff --git a/drivers/cpufreq/cpufreq-dt-platdev.c b/drivers/cpufreq/cpufreq-dt-platdev.c index aea285651fba..e1dcdb0ea1c4 100644 --- a/drivers/cpufreq/cpufreq-dt-platdev.c +++ b/drivers/cpufreq/cpufreq-dt-platdev.c @@ -163,7 +163,7 @@ static bool __init cpu0_node_has_opp_v2_prop(void) struct device_node *np = of_cpu_device_node_get(0); bool ret = false; - if (of_get_property(np, "operating-points-v2", NULL)) + if (of_property_present(np, "operating-points-v2")) ret = true; of_node_put(np); diff --git a/drivers/cpufreq/imx-cpufreq-dt.c b/drivers/cpufreq/imx-cpufreq-dt.c index 3fe9125156b4..0942498b348c 100644 --- a/drivers/cpufreq/imx-cpufreq-dt.c +++ b/drivers/cpufreq/imx-cpufreq-dt.c @@ -89,7 +89,7 @@ static int imx_cpufreq_dt_probe(struct platform_device *pdev) cpu_dev = get_cpu_device(0); - if (!of_find_property(cpu_dev->of_node, "cpu-supply", NULL)) + if (!of_property_present(cpu_dev->of_node, "cpu-supply")) return -ENODEV; if (of_machine_is_compatible("fsl,imx7ulp")) { diff --git a/drivers/cpufreq/imx6q-cpufreq.c b/drivers/cpufreq/imx6q-cpufreq.c index 00f7ad746668..49cbc43f1fa9 100644 --- a/drivers/cpufreq/imx6q-cpufreq.c +++ b/drivers/cpufreq/imx6q-cpufreq.c @@ -230,7 +230,7 @@ static int imx6q_opp_check_speed_grading(struct device *dev) u32 val; int ret; - if (of_find_property(dev->of_node, "nvmem-cells", NULL)) { + if (of_property_present(dev->of_node, "nvmem-cells")) { ret = nvmem_cell_read_u32(dev, "speed_grade", &val); if (ret) return ret; @@ -285,7 +285,7 @@ static int imx6ul_opp_check_speed_grading(struct device *dev) u32 val; int ret = 0; - if (of_find_property(dev->of_node, "nvmem-cells", NULL)) { + if (of_property_present(dev->of_node, "nvmem-cells")) { ret = nvmem_cell_read_u32(dev, "speed_grade", &val); if (ret) return ret; diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c index 8286205c7165..ca95b538c48a 100644 --- a/drivers/cpufreq/scmi-cpufreq.c +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -238,7 +238,7 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) #ifdef CONFIG_COMMON_CLK /* dummy clock provider as needed by OPP if clocks property is used */ - if (of_find_property(dev->of_node, "#clock-cells", NULL)) + if (of_property_present(dev->of_node, "#clock-cells")) devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); #endif diff --git a/drivers/cpufreq/tegra20-cpufreq.c b/drivers/cpufreq/tegra20-cpufreq.c index 8c893043953e..111d4ff6fe86 100644 --- a/drivers/cpufreq/tegra20-cpufreq.c +++ b/drivers/cpufreq/tegra20-cpufreq.c @@ -25,7 +25,7 @@ static bool cpu0_node_has_opp_v2_prop(void) struct device_node *np = of_cpu_device_node_get(0); bool ret = false; - if (of_get_property(np, "operating-points-v2", NULL)) + if (of_property_present(np, "operating-points-v2")) ret = true; of_node_put(np); From d5ce66bdf6e4bed30fb303c9d916f1a2af5f36e5 Mon Sep 17 00:00:00 2001 From: Alexandra Diupina Date: Tue, 5 Dec 2023 18:12:20 +0300 Subject: [PATCH 068/288] cpufreq: scmi: process the result of devm_of_clk_add_hw_provider() [ Upstream commit c4a5118a3ae1eadc687d84eef9431f9e13eb015c ] devm_of_clk_add_hw_provider() may return an errno, so add a return value check Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 8410e7f3b31e ("cpufreq: scmi: Fix OPP addition failure with a dummy clock provider") Signed-off-by: Alexandra Diupina Signed-off-by: Viresh Kumar Signed-off-by: Sasha Levin --- drivers/cpufreq/scmi-cpufreq.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/cpufreq/scmi-cpufreq.c b/drivers/cpufreq/scmi-cpufreq.c index ca95b538c48a..bb1389f276d7 100644 --- a/drivers/cpufreq/scmi-cpufreq.c +++ b/drivers/cpufreq/scmi-cpufreq.c @@ -238,8 +238,11 @@ static int scmi_cpufreq_probe(struct scmi_device *sdev) #ifdef CONFIG_COMMON_CLK /* dummy clock provider as needed by OPP if clocks property is used */ - if (of_property_present(dev->of_node, "#clock-cells")) - devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); + if (of_property_present(dev->of_node, "#clock-cells")) { + ret = devm_of_clk_add_hw_provider(dev, of_clk_hw_simple_get, NULL); + if (ret) + return dev_err_probe(dev, ret, "%s: registering clock provider failed\n", __func__); + } #endif ret = cpufreq_register_driver(&scmi_cpufreq_driver); From 47210a5754ba7ce70f17b1097a4ceb7f6c586179 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Wed, 28 Oct 2020 01:53:50 +0100 Subject: [PATCH 069/288] net: netlabel: Fix kerneldoc warnings [ Upstream commit 294ea29113104487a905d0f81c00dfd64121b3d9 ] net/netlabel/netlabel_calipso.c:376: warning: Function parameter or member 'ops' not described in 'netlbl_calipso_ops_register' Signed-off-by: Andrew Lunn Acked-by: Paul Moore Link: https://lore.kernel.org/r/20201028005350.930299-1-andrew@lunn.ch Signed-off-by: Jakub Kicinski Stable-dep-of: ec4e9d630a64 ("calipso: fix memory leak in netlbl_calipso_add_pass()") Signed-off-by: Sasha Levin --- net/netlabel/netlabel_calipso.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netlabel/netlabel_calipso.c b/net/netlabel/netlabel_calipso.c index 4e62f2ad3575..f28c8947c730 100644 --- a/net/netlabel/netlabel_calipso.c +++ b/net/netlabel/netlabel_calipso.c @@ -366,6 +366,7 @@ static const struct netlbl_calipso_ops *calipso_ops; /** * netlbl_calipso_ops_register - Register the CALIPSO operations + * @ops: ops to register * * Description: * Register the CALIPSO packet engine operations. From 5ac84b01a09bfbd16a760a7ec23be23a99043045 Mon Sep 17 00:00:00 2001 From: Zheng Yejian Date: Wed, 19 May 2021 15:34:38 +0800 Subject: [PATCH 070/288] netlabel: remove unused parameter in netlbl_netlink_auditinfo() [ Upstream commit f7e0318a314f9271b0f0cdd4bfdc691976976d8c ] loginuid/sessionid/secid have been read from 'current' instead of struct netlink_skb_parms, the parameter 'skb' seems no longer needed. Fixes: c53fa1ed92cd ("netlink: kill loginuid/sessionid/sid members from struct netlink_skb_parms") Signed-off-by: Zheng Yejian Signed-off-by: David S. Miller Stable-dep-of: ec4e9d630a64 ("calipso: fix memory leak in netlbl_calipso_add_pass()") Signed-off-by: Sasha Levin --- net/netlabel/netlabel_calipso.c | 4 ++-- net/netlabel/netlabel_cipso_v4.c | 4 ++-- net/netlabel/netlabel_mgmt.c | 8 ++++---- net/netlabel/netlabel_unlabeled.c | 10 +++++----- net/netlabel/netlabel_user.h | 4 +--- 5 files changed, 14 insertions(+), 16 deletions(-) diff --git a/net/netlabel/netlabel_calipso.c b/net/netlabel/netlabel_calipso.c index f28c8947c730..91a19c3ea1a3 100644 --- a/net/netlabel/netlabel_calipso.c +++ b/net/netlabel/netlabel_calipso.c @@ -105,7 +105,7 @@ static int netlbl_calipso_add(struct sk_buff *skb, struct genl_info *info) !info->attrs[NLBL_CALIPSO_A_MTYPE]) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); switch (nla_get_u32(info->attrs[NLBL_CALIPSO_A_MTYPE])) { case CALIPSO_MAP_PASS: ret_val = netlbl_calipso_add_pass(info, &audit_info); @@ -287,7 +287,7 @@ static int netlbl_calipso_remove(struct sk_buff *skb, struct genl_info *info) if (!info->attrs[NLBL_CALIPSO_A_DOI]) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); cb_arg.doi = nla_get_u32(info->attrs[NLBL_CALIPSO_A_DOI]); cb_arg.audit_info = &audit_info; ret_val = netlbl_domhsh_walk(&skip_bkt, &skip_chain, diff --git a/net/netlabel/netlabel_cipso_v4.c b/net/netlabel/netlabel_cipso_v4.c index f3f1df1b0f8e..894e6b8f1a86 100644 --- a/net/netlabel/netlabel_cipso_v4.c +++ b/net/netlabel/netlabel_cipso_v4.c @@ -410,7 +410,7 @@ static int netlbl_cipsov4_add(struct sk_buff *skb, struct genl_info *info) !info->attrs[NLBL_CIPSOV4_A_MTYPE]) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); switch (nla_get_u32(info->attrs[NLBL_CIPSOV4_A_MTYPE])) { case CIPSO_V4_MAP_TRANS: ret_val = netlbl_cipsov4_add_std(info, &audit_info); @@ -709,7 +709,7 @@ static int netlbl_cipsov4_remove(struct sk_buff *skb, struct genl_info *info) if (!info->attrs[NLBL_CIPSOV4_A_DOI]) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); cb_arg.doi = nla_get_u32(info->attrs[NLBL_CIPSOV4_A_DOI]); cb_arg.audit_info = &audit_info; ret_val = netlbl_domhsh_walk(&skip_bkt, &skip_chain, diff --git a/net/netlabel/netlabel_mgmt.c b/net/netlabel/netlabel_mgmt.c index 02a97bca1a1a..750a7a842ab9 100644 --- a/net/netlabel/netlabel_mgmt.c +++ b/net/netlabel/netlabel_mgmt.c @@ -435,7 +435,7 @@ static int netlbl_mgmt_add(struct sk_buff *skb, struct genl_info *info) (info->attrs[NLBL_MGMT_A_IPV6MASK] != NULL))) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); return netlbl_mgmt_add_common(info, &audit_info); } @@ -458,7 +458,7 @@ static int netlbl_mgmt_remove(struct sk_buff *skb, struct genl_info *info) if (!info->attrs[NLBL_MGMT_A_DOMAIN]) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); domain = nla_data(info->attrs[NLBL_MGMT_A_DOMAIN]); return netlbl_domhsh_remove(domain, AF_UNSPEC, &audit_info); @@ -558,7 +558,7 @@ static int netlbl_mgmt_adddef(struct sk_buff *skb, struct genl_info *info) (info->attrs[NLBL_MGMT_A_IPV6MASK] != NULL))) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); return netlbl_mgmt_add_common(info, &audit_info); } @@ -577,7 +577,7 @@ static int netlbl_mgmt_removedef(struct sk_buff *skb, struct genl_info *info) { struct netlbl_audit audit_info; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); return netlbl_domhsh_remove_default(AF_UNSPEC, &audit_info); } diff --git a/net/netlabel/netlabel_unlabeled.c b/net/netlabel/netlabel_unlabeled.c index ccb491642811..3049fff0b7f8 100644 --- a/net/netlabel/netlabel_unlabeled.c +++ b/net/netlabel/netlabel_unlabeled.c @@ -814,7 +814,7 @@ static int netlbl_unlabel_accept(struct sk_buff *skb, struct genl_info *info) if (info->attrs[NLBL_UNLABEL_A_ACPTFLG]) { value = nla_get_u8(info->attrs[NLBL_UNLABEL_A_ACPTFLG]); if (value == 1 || value == 0) { - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); netlbl_unlabel_acceptflg_set(value, &audit_info); return 0; } @@ -897,7 +897,7 @@ static int netlbl_unlabel_staticadd(struct sk_buff *skb, !info->attrs[NLBL_UNLABEL_A_IPV6MASK]))) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); ret_val = netlbl_unlabel_addrinfo_get(info, &addr, &mask, &addr_len); if (ret_val != 0) @@ -947,7 +947,7 @@ static int netlbl_unlabel_staticadddef(struct sk_buff *skb, !info->attrs[NLBL_UNLABEL_A_IPV6MASK]))) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); ret_val = netlbl_unlabel_addrinfo_get(info, &addr, &mask, &addr_len); if (ret_val != 0) @@ -994,7 +994,7 @@ static int netlbl_unlabel_staticremove(struct sk_buff *skb, !info->attrs[NLBL_UNLABEL_A_IPV6MASK]))) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); ret_val = netlbl_unlabel_addrinfo_get(info, &addr, &mask, &addr_len); if (ret_val != 0) @@ -1034,7 +1034,7 @@ static int netlbl_unlabel_staticremovedef(struct sk_buff *skb, !info->attrs[NLBL_UNLABEL_A_IPV6MASK]))) return -EINVAL; - netlbl_netlink_auditinfo(skb, &audit_info); + netlbl_netlink_auditinfo(&audit_info); ret_val = netlbl_unlabel_addrinfo_get(info, &addr, &mask, &addr_len); if (ret_val != 0) diff --git a/net/netlabel/netlabel_user.h b/net/netlabel/netlabel_user.h index 3c67afce64f1..32d8f92c9a20 100644 --- a/net/netlabel/netlabel_user.h +++ b/net/netlabel/netlabel_user.h @@ -28,11 +28,9 @@ /** * netlbl_netlink_auditinfo - Fetch the audit information from a NETLINK msg - * @skb: the packet * @audit_info: NetLabel audit information */ -static inline void netlbl_netlink_auditinfo(struct sk_buff *skb, - struct netlbl_audit *audit_info) +static inline void netlbl_netlink_auditinfo(struct netlbl_audit *audit_info) { security_task_getsecid(current, &audit_info->secid); audit_info->loginuid = audit_get_loginuid(current); From 44a88650ba55e6a7f2ec485d2c2413ba7e216f01 Mon Sep 17 00:00:00 2001 From: Gavrilov Ilia Date: Thu, 23 Nov 2023 09:25:54 +0000 Subject: [PATCH 071/288] calipso: fix memory leak in netlbl_calipso_add_pass() [ Upstream commit ec4e9d630a64df500641892f4e259e8149594a99 ] If IPv6 support is disabled at boot (ipv6.disable=1), the calipso_init() -> netlbl_calipso_ops_register() function isn't called, and the netlbl_calipso_ops_get() function always returns NULL. In this case, the netlbl_calipso_add_pass() function allocates memory for the doi_def variable but doesn't free it with the calipso_doi_free(). BUG: memory leak unreferenced object 0xffff888011d68180 (size 64): comm "syz-executor.1", pid 10746, jiffies 4295410986 (age 17.928s) hex dump (first 32 bytes): 00 00 00 00 02 00 00 00 00 00 00 00 00 00 00 00 ................ 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................ backtrace: [<...>] kmalloc include/linux/slab.h:552 [inline] [<...>] netlbl_calipso_add_pass net/netlabel/netlabel_calipso.c:76 [inline] [<...>] netlbl_calipso_add+0x22e/0x4f0 net/netlabel/netlabel_calipso.c:111 [<...>] genl_family_rcv_msg_doit+0x22f/0x330 net/netlink/genetlink.c:739 [<...>] genl_family_rcv_msg net/netlink/genetlink.c:783 [inline] [<...>] genl_rcv_msg+0x341/0x5a0 net/netlink/genetlink.c:800 [<...>] netlink_rcv_skb+0x14d/0x440 net/netlink/af_netlink.c:2515 [<...>] genl_rcv+0x29/0x40 net/netlink/genetlink.c:811 [<...>] netlink_unicast_kernel net/netlink/af_netlink.c:1313 [inline] [<...>] netlink_unicast+0x54b/0x800 net/netlink/af_netlink.c:1339 [<...>] netlink_sendmsg+0x90a/0xdf0 net/netlink/af_netlink.c:1934 [<...>] sock_sendmsg_nosec net/socket.c:651 [inline] [<...>] sock_sendmsg+0x157/0x190 net/socket.c:671 [<...>] ____sys_sendmsg+0x712/0x870 net/socket.c:2342 [<...>] ___sys_sendmsg+0xf8/0x170 net/socket.c:2396 [<...>] __sys_sendmsg+0xea/0x1b0 net/socket.c:2429 [<...>] do_syscall_64+0x30/0x40 arch/x86/entry/common.c:46 [<...>] entry_SYSCALL_64_after_hwframe+0x61/0xc6 Found by InfoTeCS on behalf of Linux Verification Center (linuxtesting.org) with Syzkaller Fixes: cb72d38211ea ("netlabel: Initial support for the CALIPSO netlink protocol.") Signed-off-by: Gavrilov Ilia [PM: merged via the LSM tree at Jakub Kicinski request] Signed-off-by: Paul Moore Signed-off-by: Sasha Levin --- net/netlabel/netlabel_calipso.c | 49 +++++++++++++++++---------------- 1 file changed, 26 insertions(+), 23 deletions(-) diff --git a/net/netlabel/netlabel_calipso.c b/net/netlabel/netlabel_calipso.c index 91a19c3ea1a3..84ef4a29864b 100644 --- a/net/netlabel/netlabel_calipso.c +++ b/net/netlabel/netlabel_calipso.c @@ -54,6 +54,28 @@ static const struct nla_policy calipso_genl_policy[NLBL_CALIPSO_A_MAX + 1] = { [NLBL_CALIPSO_A_MTYPE] = { .type = NLA_U32 }, }; +static const struct netlbl_calipso_ops *calipso_ops; + +/** + * netlbl_calipso_ops_register - Register the CALIPSO operations + * @ops: ops to register + * + * Description: + * Register the CALIPSO packet engine operations. + * + */ +const struct netlbl_calipso_ops * +netlbl_calipso_ops_register(const struct netlbl_calipso_ops *ops) +{ + return xchg(&calipso_ops, ops); +} +EXPORT_SYMBOL(netlbl_calipso_ops_register); + +static const struct netlbl_calipso_ops *netlbl_calipso_ops_get(void) +{ + return READ_ONCE(calipso_ops); +} + /* NetLabel Command Handlers */ /** @@ -96,15 +118,18 @@ static int netlbl_calipso_add_pass(struct genl_info *info, * */ static int netlbl_calipso_add(struct sk_buff *skb, struct genl_info *info) - { int ret_val = -EINVAL; struct netlbl_audit audit_info; + const struct netlbl_calipso_ops *ops = netlbl_calipso_ops_get(); if (!info->attrs[NLBL_CALIPSO_A_DOI] || !info->attrs[NLBL_CALIPSO_A_MTYPE]) return -EINVAL; + if (!ops) + return -EOPNOTSUPP; + netlbl_netlink_auditinfo(&audit_info); switch (nla_get_u32(info->attrs[NLBL_CALIPSO_A_MTYPE])) { case CALIPSO_MAP_PASS: @@ -362,28 +387,6 @@ int __init netlbl_calipso_genl_init(void) return genl_register_family(&netlbl_calipso_gnl_family); } -static const struct netlbl_calipso_ops *calipso_ops; - -/** - * netlbl_calipso_ops_register - Register the CALIPSO operations - * @ops: ops to register - * - * Description: - * Register the CALIPSO packet engine operations. - * - */ -const struct netlbl_calipso_ops * -netlbl_calipso_ops_register(const struct netlbl_calipso_ops *ops) -{ - return xchg(&calipso_ops, ops); -} -EXPORT_SYMBOL(netlbl_calipso_ops_register); - -static const struct netlbl_calipso_ops *netlbl_calipso_ops_get(void) -{ - return READ_ONCE(calipso_ops); -} - /** * calipso_doi_add - Add a new DOI to the CALIPSO protocol engine * @doi_def: the DOI structure From 94c742324ed7e42c5bd6a9ed22e4ec6d764db4d8 Mon Sep 17 00:00:00 2001 From: Ilias Apalodimas Date: Tue, 7 Nov 2023 14:40:56 +0900 Subject: [PATCH 072/288] efivarfs: force RO when remounting if SetVariable is not supported [ Upstream commit 0e8d2444168dd519fea501599d150e62718ed2fe ] If SetVariable at runtime is not supported by the firmware we never assign a callback for that function. At the same time mount the efivarfs as RO so no one can call that. However, we never check the permission flags when someone remounts the filesystem as RW. As a result this leads to a crash looking like this: $ mount -o remount,rw /sys/firmware/efi/efivars $ efi-updatevar -f PK.auth PK [ 303.279166] Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 [ 303.280482] Mem abort info: [ 303.280854] ESR = 0x0000000086000004 [ 303.281338] EC = 0x21: IABT (current EL), IL = 32 bits [ 303.282016] SET = 0, FnV = 0 [ 303.282414] EA = 0, S1PTW = 0 [ 303.282821] FSC = 0x04: level 0 translation fault [ 303.283771] user pgtable: 4k pages, 48-bit VAs, pgdp=000000004258c000 [ 303.284913] [0000000000000000] pgd=0000000000000000, p4d=0000000000000000 [ 303.286076] Internal error: Oops: 0000000086000004 [#1] PREEMPT SMP [ 303.286936] Modules linked in: qrtr tpm_tis tpm_tis_core crct10dif_ce arm_smccc_trng rng_core drm fuse ip_tables x_tables ipv6 [ 303.288586] CPU: 1 PID: 755 Comm: efi-updatevar Not tainted 6.3.0-rc1-00108-gc7d0c4695c68 #1 [ 303.289748] Hardware name: Unknown Unknown Product/Unknown Product, BIOS 2023.04-00627-g88336918701d 04/01/2023 [ 303.291150] pstate: 60400005 (nZCv daif +PAN -UAO -TCO -DIT -SSBS BTYPE=--) [ 303.292123] pc : 0x0 [ 303.292443] lr : efivar_set_variable_locked+0x74/0xec [ 303.293156] sp : ffff800008673c10 [ 303.293619] x29: ffff800008673c10 x28: ffff0000037e8000 x27: 0000000000000000 [ 303.294592] x26: 0000000000000800 x25: ffff000002467400 x24: 0000000000000027 [ 303.295572] x23: ffffd49ea9832000 x22: ffff0000020c9800 x21: ffff000002467000 [ 303.296566] x20: 0000000000000001 x19: 00000000000007fc x18: 0000000000000000 [ 303.297531] x17: 0000000000000000 x16: 0000000000000000 x15: 0000aaaac807ab54 [ 303.298495] x14: ed37489f673633c0 x13: 71c45c606de13f80 x12: 47464259e219acf4 [ 303.299453] x11: ffff000002af7b01 x10: 0000000000000003 x9 : 0000000000000002 [ 303.300431] x8 : 0000000000000010 x7 : ffffd49ea8973230 x6 : 0000000000a85201 [ 303.301412] x5 : 0000000000000000 x4 : ffff0000020c9800 x3 : 00000000000007fc [ 303.302370] x2 : 0000000000000027 x1 : ffff000002467400 x0 : ffff000002467000 [ 303.303341] Call trace: [ 303.303679] 0x0 [ 303.303938] efivar_entry_set_get_size+0x98/0x16c [ 303.304585] efivarfs_file_write+0xd0/0x1a4 [ 303.305148] vfs_write+0xc4/0x2e4 [ 303.305601] ksys_write+0x70/0x104 [ 303.306073] __arm64_sys_write+0x1c/0x28 [ 303.306622] invoke_syscall+0x48/0x114 [ 303.307156] el0_svc_common.constprop.0+0x44/0xec [ 303.307803] do_el0_svc+0x38/0x98 [ 303.308268] el0_svc+0x2c/0x84 [ 303.308702] el0t_64_sync_handler+0xf4/0x120 [ 303.309293] el0t_64_sync+0x190/0x194 [ 303.309794] Code: ???????? ???????? ???????? ???????? (????????) [ 303.310612] ---[ end trace 0000000000000000 ]--- Fix this by adding a .reconfigure() function to the fs operations which we can use to check the requested flags and deny anything that's not RO if the firmware doesn't implement SetVariable at runtime. Fixes: f88814cc2578 ("efi/efivars: Expose RT service availability via efivars abstraction") Signed-off-by: Ilias Apalodimas Signed-off-by: Ard Biesheuvel Signed-off-by: Sasha Levin --- fs/efivarfs/super.c | 12 ++++++++++++ 1 file changed, 12 insertions(+) diff --git a/fs/efivarfs/super.c b/fs/efivarfs/super.c index 15880a68faad..3626816b174a 100644 --- a/fs/efivarfs/super.c +++ b/fs/efivarfs/super.c @@ -13,6 +13,7 @@ #include #include #include +#include #include "internal.h" @@ -231,8 +232,19 @@ static int efivarfs_get_tree(struct fs_context *fc) return get_tree_single(fc, efivarfs_fill_super); } +static int efivarfs_reconfigure(struct fs_context *fc) +{ + if (!efivar_supports_writes() && !(fc->sb_flags & SB_RDONLY)) { + pr_err("Firmware does not support SetVariableRT. Can not remount with rw\n"); + return -EINVAL; + } + + return 0; +} + static const struct fs_context_operations efivarfs_context_ops = { .get_tree = efivarfs_get_tree, + .reconfigure = efivarfs_reconfigure, }; static int efivarfs_init_fs_context(struct fs_context *fc) From 46e3dc02a4aebeab93a2c0187247b244f6725471 Mon Sep 17 00:00:00 2001 From: Wolfram Sang Date: Tue, 12 Dec 2023 09:12:38 +0100 Subject: [PATCH 073/288] spi: sh-msiof: Enforce fixed DTDL for R-Car H3 [ Upstream commit e5c7bcb499840551cfbe85c6df177ebc50432bf0 ] Documentation says only DTDL of 200 is allowed for this SoC. Fixes: 4286db8456f4 ("spi: sh-msiof: Add R-Car Gen 2 and 3 fallback bindings") Signed-off-by: Wolfram Sang Reviewed-by: Geert Uytterhoeven Reviewed-by: Yoshihiro Shimoda Link: https://msgid.link/r/20231212081239.14254-1-wsa+renesas@sang-engineering.com Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- drivers/spi/spi-sh-msiof.c | 17 +++++++++++++++++ 1 file changed, 17 insertions(+) diff --git a/drivers/spi/spi-sh-msiof.c b/drivers/spi/spi-sh-msiof.c index b2579af0e3eb..35d30378256f 100644 --- a/drivers/spi/spi-sh-msiof.c +++ b/drivers/spi/spi-sh-msiof.c @@ -30,12 +30,15 @@ #include +#define SH_MSIOF_FLAG_FIXED_DTDL_200 BIT(0) + struct sh_msiof_chipdata { u32 bits_per_word_mask; u16 tx_fifo_size; u16 rx_fifo_size; u16 ctlr_flags; u16 min_div_pow; + u32 flags; }; struct sh_msiof_spi_priv { @@ -1069,6 +1072,16 @@ static const struct sh_msiof_chipdata rcar_gen3_data = { .min_div_pow = 1, }; +static const struct sh_msiof_chipdata rcar_r8a7795_data = { + .bits_per_word_mask = SPI_BPW_MASK(8) | SPI_BPW_MASK(16) | + SPI_BPW_MASK(24) | SPI_BPW_MASK(32), + .tx_fifo_size = 64, + .rx_fifo_size = 64, + .ctlr_flags = SPI_CONTROLLER_MUST_TX, + .min_div_pow = 1, + .flags = SH_MSIOF_FLAG_FIXED_DTDL_200, +}; + static const struct of_device_id sh_msiof_match[] = { { .compatible = "renesas,sh-mobile-msiof", .data = &sh_data }, { .compatible = "renesas,msiof-r8a7743", .data = &rcar_gen2_data }, @@ -1079,6 +1092,7 @@ static const struct of_device_id sh_msiof_match[] = { { .compatible = "renesas,msiof-r8a7793", .data = &rcar_gen2_data }, { .compatible = "renesas,msiof-r8a7794", .data = &rcar_gen2_data }, { .compatible = "renesas,rcar-gen2-msiof", .data = &rcar_gen2_data }, + { .compatible = "renesas,msiof-r8a7795", .data = &rcar_r8a7795_data }, { .compatible = "renesas,msiof-r8a7796", .data = &rcar_gen3_data }, { .compatible = "renesas,rcar-gen3-msiof", .data = &rcar_gen3_data }, { .compatible = "renesas,sh-msiof", .data = &sh_data }, /* Deprecated */ @@ -1274,6 +1288,9 @@ static int sh_msiof_spi_probe(struct platform_device *pdev) return -ENXIO; } + if (chipdata->flags & SH_MSIOF_FLAG_FIXED_DTDL_200) + info->dtdl = 200; + if (info->mode == MSIOF_SPI_SLAVE) ctlr = spi_alloc_slave(&pdev->dev, sizeof(struct sh_msiof_spi_priv)); From 1d7b39c842c883fbb713802f5f36c5ea4e2cd12d Mon Sep 17 00:00:00 2001 From: Tony Luck Date: Tue, 12 Dec 2023 13:22:39 -0800 Subject: [PATCH 074/288] ACPI: extlog: Clear Extended Error Log status when RAS_CEC handled the error [ Upstream commit 38c872a9e96f72f2947affc0526cc05659367d3d ] When both CONFIG_RAS_CEC and CONFIG_ACPI_EXTLOG are enabled, Linux does not clear the status word of the BIOS supplied error record for corrected errors. This may prevent logging of subsequent uncorrected errors. Fix by clearing the status. Fixes: 23ba710a0864 ("x86/mce: Fix all mce notifiers to update the mce->kflags bitmask") Reported-by: Erwin Tsaur Signed-off-by: Tony Luck Signed-off-by: Rafael J. Wysocki Signed-off-by: Sasha Levin --- drivers/acpi/acpi_extlog.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/acpi/acpi_extlog.c b/drivers/acpi/acpi_extlog.c index e648158368a7..088db2356998 100644 --- a/drivers/acpi/acpi_extlog.c +++ b/drivers/acpi/acpi_extlog.c @@ -145,9 +145,14 @@ static int extlog_print(struct notifier_block *nb, unsigned long val, static u32 err_seq; estatus = extlog_elog_entry_check(cpu, bank); - if (estatus == NULL || (mce->kflags & MCE_HANDLED_CEC)) + if (!estatus) return NOTIFY_DONE; + if (mce->kflags & MCE_HANDLED_CEC) { + estatus->block_status = 0; + return NOTIFY_DONE; + } + memcpy(elog_buf, (void *)estatus, ELOG_ENTRY_LEN); /* clear record status to enable BIOS to update it again */ estatus->block_status = 0; From 001a3f59d8c914ef8273461d4bf495df384cc5f8 Mon Sep 17 00:00:00 2001 From: ZhaoLong Wang Date: Wed, 20 Dec 2023 10:46:19 +0800 Subject: [PATCH 075/288] mtd: Fix gluebi NULL pointer dereference caused by ftl notifier MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit a43bdc376deab5fff1ceb93dca55bcab8dbdc1d6 ] If both ftl.ko and gluebi.ko are loaded, the notifier of ftl triggers NULL pointer dereference when trying to access ‘gluebi->desc’ in gluebi_read(). ubi_gluebi_init ubi_register_volume_notifier ubi_enumerate_volumes ubi_notify_all gluebi_notify nb->notifier_call() gluebi_create mtd_device_register mtd_device_parse_register add_mtd_device blktrans_notify_add not->add() ftl_add_mtd tr->add_mtd() scan_header mtd_read mtd_read_oob mtd_read_oob_std gluebi_read mtd->read() gluebi->desc - NULL Detailed reproduction information available at the Link [1], In the normal case, obtain gluebi->desc in the gluebi_get_device(), and access gluebi->desc in the gluebi_read(). However, gluebi_get_device() is not executed in advance in the ftl_add_mtd() process, which leads to NULL pointer dereference. The solution for the gluebi module is to run jffs2 on the UBI volume without considering working with ftl or mtdblock [2]. Therefore, this problem can be avoided by preventing gluebi from creating the mtdblock device after creating mtd partition of the type MTD_UBIVOLUME. Fixes: 2ba3d76a1e29 ("UBI: make gluebi a separate module") Link: https://bugzilla.kernel.org/show_bug.cgi?id=217992 [1] Link: https://lore.kernel.org/lkml/441107100.23734.1697904580252.JavaMail.zimbra@nod.at/ [2] Signed-off-by: ZhaoLong Wang Reviewed-by: Zhihao Cheng Acked-by: Richard Weinberger Signed-off-by: Miquel Raynal Link: https://lore.kernel.org/linux-mtd/20231220024619.2138625-1-wangzhaolong1@huawei.com Signed-off-by: Sasha Levin --- drivers/mtd/mtd_blkdevs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/mtd/mtd_blkdevs.c b/drivers/mtd/mtd_blkdevs.c index 0c05f77f9b21..dd0d0bf5f57f 100644 --- a/drivers/mtd/mtd_blkdevs.c +++ b/drivers/mtd/mtd_blkdevs.c @@ -533,7 +533,7 @@ static void blktrans_notify_add(struct mtd_info *mtd) { struct mtd_blktrans_ops *tr; - if (mtd->type == MTD_ABSENT) + if (mtd->type == MTD_ABSENT || mtd->type == MTD_UBIVOLUME) return; list_for_each_entry(tr, &blktrans_majors, list) @@ -576,7 +576,7 @@ int register_mtd_blktrans(struct mtd_blktrans_ops *tr) list_add(&tr->list, &blktrans_majors); mtd_for_each_device(mtd) - if (mtd->type != MTD_ABSENT) + if (mtd->type != MTD_ABSENT && mtd->type != MTD_UBIVOLUME) tr->add_mtd(tr, mtd); mutex_unlock(&mtd_table_mutex); From 1bc7a682edea704644869da5c2184c56e345a7f3 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Micka=C3=ABl=20Sala=C3=BCn?= Date: Wed, 3 Jan 2024 17:34:15 +0100 Subject: [PATCH 076/288] selinux: Fix error priority for bind with AF_UNSPEC on PF_INET6 socket MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit bbf5a1d0e5d0fb3bdf90205aa872636122692a50 ] The IPv6 network stack first checks the sockaddr length (-EINVAL error) before checking the family (-EAFNOSUPPORT error). This was discovered thanks to commit a549d055a22e ("selftests/landlock: Add network tests"). Cc: Eric Paris Cc: Konstantin Meskhidze Cc: Paul Moore Cc: Stephen Smalley Reported-by: Muhammad Usama Anjum Closes: https://lore.kernel.org/r/0584f91c-537c-4188-9e4f-04f192565667@collabora.com Fixes: 0f8db8cc73df ("selinux: add AF_UNSPEC and INADDR_ANY checks to selinux_socket_bind()") Signed-off-by: Mickaël Salaün Tested-by: Muhammad Usama Anjum Signed-off-by: Paul Moore Signed-off-by: Sasha Levin --- security/selinux/hooks.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index ee37ce2e2619..f545321d96dc 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -4620,6 +4620,13 @@ static int selinux_socket_bind(struct socket *sock, struct sockaddr *address, in return -EINVAL; addr4 = (struct sockaddr_in *)address; if (family_sa == AF_UNSPEC) { + if (family == PF_INET6) { + /* Length check from inet6_bind_sk() */ + if (addrlen < SIN6_LEN_RFC2133) + return -EINVAL; + /* Family check from __inet6_bind() */ + goto err_af; + } /* see __inet_bind(), we only want to allow * AF_UNSPEC if the address is INADDR_ANY */ From b2092cdcdabccdf2544bdded823aba94aac3a0d8 Mon Sep 17 00:00:00 2001 From: zhenwei pi Date: Wed, 2 Mar 2022 11:39:14 +0800 Subject: [PATCH 077/288] virtio_crypto: Introduce VIRTIO_CRYPTO_NOSPC [ Upstream commit 13d640a3e9a3ac7ec694843d3d3b785e85fb8cb8 ] Base on the lastest virtio crypto spec, define VIRTIO_CRYPTO_NOSPC. Reviewed-by: Gonglei Signed-off-by: zhenwei pi Link: https://lore.kernel.org/r/20220302033917.1295334-2-pizhenwei@bytedance.com Signed-off-by: Michael S. Tsirkin Stable-dep-of: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet") Signed-off-by: Sasha Levin --- include/uapi/linux/virtio_crypto.h | 1 + 1 file changed, 1 insertion(+) diff --git a/include/uapi/linux/virtio_crypto.h b/include/uapi/linux/virtio_crypto.h index a03932f10565..1166a49084b0 100644 --- a/include/uapi/linux/virtio_crypto.h +++ b/include/uapi/linux/virtio_crypto.h @@ -408,6 +408,7 @@ struct virtio_crypto_op_data_req { #define VIRTIO_CRYPTO_BADMSG 2 #define VIRTIO_CRYPTO_NOTSUPP 3 #define VIRTIO_CRYPTO_INVSESS 4 /* Invalid session id */ +#define VIRTIO_CRYPTO_NOSPC 5 /* no free session ID */ /* The accelerator hardware is ready */ #define VIRTIO_CRYPTO_S_HW_READY (1 << 0) From f32dfee5a6a6b003bb3b42ce5ef86ed4b4b0e18c Mon Sep 17 00:00:00 2001 From: zhenwei pi Date: Wed, 2 Mar 2022 11:39:15 +0800 Subject: [PATCH 078/288] virtio-crypto: introduce akcipher service [ Upstream commit 24e19590628b58578748eeaec8140bf9c9dc00d9 ] Introduce asymmetric service definition, asymmetric operations and several well known algorithms. Co-developed-by: lei he Signed-off-by: lei he Signed-off-by: zhenwei pi Link: https://lore.kernel.org/r/20220302033917.1295334-3-pizhenwei@bytedance.com Signed-off-by: Michael S. Tsirkin Reviewed-by: Gonglei Stable-dep-of: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet") Signed-off-by: Sasha Levin --- include/uapi/linux/virtio_crypto.h | 81 +++++++++++++++++++++++++++++- 1 file changed, 80 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/virtio_crypto.h b/include/uapi/linux/virtio_crypto.h index 1166a49084b0..71a54a6849ca 100644 --- a/include/uapi/linux/virtio_crypto.h +++ b/include/uapi/linux/virtio_crypto.h @@ -37,6 +37,7 @@ #define VIRTIO_CRYPTO_SERVICE_HASH 1 #define VIRTIO_CRYPTO_SERVICE_MAC 2 #define VIRTIO_CRYPTO_SERVICE_AEAD 3 +#define VIRTIO_CRYPTO_SERVICE_AKCIPHER 4 #define VIRTIO_CRYPTO_OPCODE(service, op) (((service) << 8) | (op)) @@ -57,6 +58,10 @@ struct virtio_crypto_ctrl_header { VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x02) #define VIRTIO_CRYPTO_AEAD_DESTROY_SESSION \ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x03) +#define VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x04) +#define VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x05) __le32 opcode; __le32 algo; __le32 flag; @@ -180,6 +185,58 @@ struct virtio_crypto_aead_create_session_req { __u8 padding[32]; }; +struct virtio_crypto_rsa_session_para { +#define VIRTIO_CRYPTO_RSA_RAW_PADDING 0 +#define VIRTIO_CRYPTO_RSA_PKCS1_PADDING 1 + __le32 padding_algo; + +#define VIRTIO_CRYPTO_RSA_NO_HASH 0 +#define VIRTIO_CRYPTO_RSA_MD2 1 +#define VIRTIO_CRYPTO_RSA_MD3 2 +#define VIRTIO_CRYPTO_RSA_MD4 3 +#define VIRTIO_CRYPTO_RSA_MD5 4 +#define VIRTIO_CRYPTO_RSA_SHA1 5 +#define VIRTIO_CRYPTO_RSA_SHA256 6 +#define VIRTIO_CRYPTO_RSA_SHA384 7 +#define VIRTIO_CRYPTO_RSA_SHA512 8 +#define VIRTIO_CRYPTO_RSA_SHA224 9 + __le32 hash_algo; +}; + +struct virtio_crypto_ecdsa_session_para { +#define VIRTIO_CRYPTO_CURVE_UNKNOWN 0 +#define VIRTIO_CRYPTO_CURVE_NIST_P192 1 +#define VIRTIO_CRYPTO_CURVE_NIST_P224 2 +#define VIRTIO_CRYPTO_CURVE_NIST_P256 3 +#define VIRTIO_CRYPTO_CURVE_NIST_P384 4 +#define VIRTIO_CRYPTO_CURVE_NIST_P521 5 + __le32 curve_id; + __le32 padding; +}; + +struct virtio_crypto_akcipher_session_para { +#define VIRTIO_CRYPTO_NO_AKCIPHER 0 +#define VIRTIO_CRYPTO_AKCIPHER_RSA 1 +#define VIRTIO_CRYPTO_AKCIPHER_DSA 2 +#define VIRTIO_CRYPTO_AKCIPHER_ECDSA 3 + __le32 algo; + +#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC 1 +#define VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE 2 + __le32 keytype; + __le32 keylen; + + union { + struct virtio_crypto_rsa_session_para rsa; + struct virtio_crypto_ecdsa_session_para ecdsa; + } u; +}; + +struct virtio_crypto_akcipher_create_session_req { + struct virtio_crypto_akcipher_session_para para; + __u8 padding[36]; +}; + struct virtio_crypto_alg_chain_session_para { #define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_HASH_THEN_CIPHER 1 #define VIRTIO_CRYPTO_SYM_ALG_CHAIN_ORDER_CIPHER_THEN_HASH 2 @@ -247,6 +304,8 @@ struct virtio_crypto_op_ctrl_req { mac_create_session; struct virtio_crypto_aead_create_session_req aead_create_session; + struct virtio_crypto_akcipher_create_session_req + akcipher_create_session; struct virtio_crypto_destroy_session_req destroy_session; __u8 padding[56]; @@ -266,6 +325,14 @@ struct virtio_crypto_op_header { VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x00) #define VIRTIO_CRYPTO_AEAD_DECRYPT \ VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AEAD, 0x01) +#define VIRTIO_CRYPTO_AKCIPHER_ENCRYPT \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x00) +#define VIRTIO_CRYPTO_AKCIPHER_DECRYPT \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x01) +#define VIRTIO_CRYPTO_AKCIPHER_SIGN \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x02) +#define VIRTIO_CRYPTO_AKCIPHER_VERIFY \ + VIRTIO_CRYPTO_OPCODE(VIRTIO_CRYPTO_SERVICE_AKCIPHER, 0x03) __le32 opcode; /* algo should be service-specific algorithms */ __le32 algo; @@ -390,6 +457,16 @@ struct virtio_crypto_aead_data_req { __u8 padding[32]; }; +struct virtio_crypto_akcipher_para { + __le32 src_data_len; + __le32 dst_data_len; +}; + +struct virtio_crypto_akcipher_data_req { + struct virtio_crypto_akcipher_para para; + __u8 padding[40]; +}; + /* The request of the data virtqueue's packet */ struct virtio_crypto_op_data_req { struct virtio_crypto_op_header header; @@ -399,6 +476,7 @@ struct virtio_crypto_op_data_req { struct virtio_crypto_hash_data_req hash_req; struct virtio_crypto_mac_data_req mac_req; struct virtio_crypto_aead_data_req aead_req; + struct virtio_crypto_akcipher_data_req akcipher_req; __u8 padding[48]; } u; }; @@ -409,6 +487,7 @@ struct virtio_crypto_op_data_req { #define VIRTIO_CRYPTO_NOTSUPP 3 #define VIRTIO_CRYPTO_INVSESS 4 /* Invalid session id */ #define VIRTIO_CRYPTO_NOSPC 5 /* no free session ID */ +#define VIRTIO_CRYPTO_KEY_REJECTED 6 /* Signature verification failed */ /* The accelerator hardware is ready */ #define VIRTIO_CRYPTO_S_HW_READY (1 << 0) @@ -439,7 +518,7 @@ struct virtio_crypto_config { __le32 max_cipher_key_len; /* Maximum length of authenticated key */ __le32 max_auth_key_len; - __le32 reserve; + __le32 akcipher_algo; /* Maximum size of each crypto request's content */ __le64 max_size; }; From 1ff57428894fc4f5001d3df0762c1820295d6c4f Mon Sep 17 00:00:00 2001 From: zhenwei pi Date: Wed, 2 Mar 2022 11:39:16 +0800 Subject: [PATCH 079/288] virtio-crypto: implement RSA algorithm [ Upstream commit 59ca6c93387d325e96577d8bd4c23c78c1491c11 ] Support rsa & pkcs1pad(rsa,sha1) with priority 150. Test with QEMU built-in backend, it works fine. 1, The self-test framework of crypto layer works fine in guest kernel 2, Test with Linux guest(with asym support), the following script test(note that pkey_XXX is supported only in a newer version of keyutils): - both public key & private key - create/close session - encrypt/decrypt/sign/verify basic driver operation - also test with kernel crypto layer(pkey add/query) All the cases work fine. rm -rf *.der *.pem *.pfx modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=226 openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem -out cert.pem -subj "/C=CN/ST=BJ/L=HD/O=qemu/OU=dev/CN=qemu/emailAddress=qemu@qemu.org" openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der openssl x509 -in cert.pem -inform PEM -outform DER -out cert.der PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 echo "Enc with priv key..." keyctl pkey_encrypt $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.priv echo "Dec with pub key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.priv enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Sign with priv key..." keyctl pkey_sign $PRIV_KEY_ID 0 /tmp/data enc=pkcs1 hash=sha1 > /tmp/sig echo "Verify with pub key..." keyctl pkey_verify $PRIV_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 echo "Enc with pub key..." keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub echo "Dec with priv key..." keyctl pkey_decrypt $PRIV_KEY_ID 0 /tmp/enc.pub enc=pkcs1 >/tmp/dec cmp /tmp/data /tmp/dec echo "Verify with pub key..." keyctl pkey_verify $PUB_KEY_ID 0 /tmp/data /tmp/sig enc=pkcs1 hash=sha1 [1 compiling warning during development] Reported-by: kernel test robot Co-developed-by: lei he Signed-off-by: lei he Signed-off-by: zhenwei pi Link: https://lore.kernel.org/r/20220302033917.1295334-4-pizhenwei@bytedance.com Reviewed-by: Gonglei Signed-off-by: Nathan Chancellor #Kconfig tweaks Link: https://lore.kernel.org/r/20220308205309.2192502-1-nathan@kernel.org Signed-off-by: Michael S. Tsirkin Stable-dep-of: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet") Signed-off-by: Sasha Levin --- drivers/crypto/virtio/Kconfig | 3 + drivers/crypto/virtio/Makefile | 1 + .../virtio/virtio_crypto_akcipher_algs.c | 585 ++++++++++++++++++ drivers/crypto/virtio/virtio_crypto_common.h | 3 + drivers/crypto/virtio/virtio_crypto_core.c | 6 +- drivers/crypto/virtio/virtio_crypto_mgr.c | 11 + 6 files changed, 608 insertions(+), 1 deletion(-) create mode 100644 drivers/crypto/virtio/virtio_crypto_akcipher_algs.c diff --git a/drivers/crypto/virtio/Kconfig b/drivers/crypto/virtio/Kconfig index b894e3a8be4f..5f8915f4a9ff 100644 --- a/drivers/crypto/virtio/Kconfig +++ b/drivers/crypto/virtio/Kconfig @@ -3,8 +3,11 @@ config CRYPTO_DEV_VIRTIO tristate "VirtIO crypto driver" depends on VIRTIO select CRYPTO_AEAD + select CRYPTO_AKCIPHER2 select CRYPTO_SKCIPHER select CRYPTO_ENGINE + select CRYPTO_RSA + select MPILIB help This driver provides support for virtio crypto device. If you choose 'M' here, this module will be called virtio_crypto. diff --git a/drivers/crypto/virtio/Makefile b/drivers/crypto/virtio/Makefile index cbfccccfa135..f2b839473d61 100644 --- a/drivers/crypto/virtio/Makefile +++ b/drivers/crypto/virtio/Makefile @@ -2,5 +2,6 @@ obj-$(CONFIG_CRYPTO_DEV_VIRTIO) += virtio_crypto.o virtio_crypto-objs := \ virtio_crypto_algs.o \ + virtio_crypto_akcipher_algs.o \ virtio_crypto_mgr.o \ virtio_crypto_core.o diff --git a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c new file mode 100644 index 000000000000..f3ec9420215e --- /dev/null +++ b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c @@ -0,0 +1,585 @@ +// SPDX-License-Identifier: GPL-2.0-or-later + /* Asymmetric algorithms supported by virtio crypto device + * + * Authors: zhenwei pi + * lei he + * + * Copyright 2022 Bytedance CO., LTD. + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +#include +#include "virtio_crypto_common.h" + +struct virtio_crypto_rsa_ctx { + MPI n; +}; + +struct virtio_crypto_akcipher_ctx { + struct crypto_engine_ctx enginectx; + struct virtio_crypto *vcrypto; + struct crypto_akcipher *tfm; + bool session_valid; + __u64 session_id; + union { + struct virtio_crypto_rsa_ctx rsa_ctx; + }; +}; + +struct virtio_crypto_akcipher_request { + struct virtio_crypto_request base; + struct virtio_crypto_akcipher_ctx *akcipher_ctx; + struct akcipher_request *akcipher_req; + void *src_buf; + void *dst_buf; + uint32_t opcode; +}; + +struct virtio_crypto_akcipher_algo { + uint32_t algonum; + uint32_t service; + unsigned int active_devs; + struct akcipher_alg algo; +}; + +static DEFINE_MUTEX(algs_lock); + +static void virtio_crypto_akcipher_finalize_req( + struct virtio_crypto_akcipher_request *vc_akcipher_req, + struct akcipher_request *req, int err) +{ + virtcrypto_clear_request(&vc_akcipher_req->base); + + crypto_finalize_akcipher_request(vc_akcipher_req->base.dataq->engine, req, err); +} + +static void virtio_crypto_dataq_akcipher_callback(struct virtio_crypto_request *vc_req, int len) +{ + struct virtio_crypto_akcipher_request *vc_akcipher_req = + container_of(vc_req, struct virtio_crypto_akcipher_request, base); + struct akcipher_request *akcipher_req; + int error; + + switch (vc_req->status) { + case VIRTIO_CRYPTO_OK: + error = 0; + break; + case VIRTIO_CRYPTO_INVSESS: + case VIRTIO_CRYPTO_ERR: + error = -EINVAL; + break; + case VIRTIO_CRYPTO_BADMSG: + error = -EBADMSG; + break; + + case VIRTIO_CRYPTO_KEY_REJECTED: + error = -EKEYREJECTED; + break; + + default: + error = -EIO; + break; + } + + akcipher_req = vc_akcipher_req->akcipher_req; + if (vc_akcipher_req->opcode != VIRTIO_CRYPTO_AKCIPHER_VERIFY) + sg_copy_from_buffer(akcipher_req->dst, sg_nents(akcipher_req->dst), + vc_akcipher_req->dst_buf, akcipher_req->dst_len); + virtio_crypto_akcipher_finalize_req(vc_akcipher_req, akcipher_req, error); +} + +static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher_ctx *ctx, + struct virtio_crypto_ctrl_header *header, void *para, + const uint8_t *key, unsigned int keylen) +{ + struct scatterlist outhdr_sg, key_sg, inhdr_sg, *sgs[3]; + struct virtio_crypto *vcrypto = ctx->vcrypto; + uint8_t *pkey; + unsigned int inlen; + int err; + unsigned int num_out = 0, num_in = 0; + + pkey = kmemdup(key, keylen, GFP_ATOMIC); + if (!pkey) + return -ENOMEM; + + spin_lock(&vcrypto->ctrl_lock); + memcpy(&vcrypto->ctrl.header, header, sizeof(vcrypto->ctrl.header)); + memcpy(&vcrypto->ctrl.u, para, sizeof(vcrypto->ctrl.u)); + vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); + + sg_init_one(&outhdr_sg, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); + sgs[num_out++] = &outhdr_sg; + + sg_init_one(&key_sg, pkey, keylen); + sgs[num_out++] = &key_sg; + + sg_init_one(&inhdr_sg, &vcrypto->input, sizeof(vcrypto->input)); + sgs[num_out + num_in++] = &inhdr_sg; + + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); + if (err < 0) + goto out; + + virtqueue_kick(vcrypto->ctrl_vq); + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && + !virtqueue_is_broken(vcrypto->ctrl_vq)) + cpu_relax(); + + if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { + err = -EINVAL; + goto out; + } + + ctx->session_id = le64_to_cpu(vcrypto->input.session_id); + ctx->session_valid = true; + err = 0; + +out: + spin_unlock(&vcrypto->ctrl_lock); + kfree_sensitive(pkey); + + if (err < 0) + pr_err("virtio_crypto: Create session failed status: %u\n", + le32_to_cpu(vcrypto->input.status)); + + return err; +} + +static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akcipher_ctx *ctx) +{ + struct scatterlist outhdr_sg, inhdr_sg, *sgs[2]; + struct virtio_crypto_destroy_session_req *destroy_session; + struct virtio_crypto *vcrypto = ctx->vcrypto; + unsigned int num_out = 0, num_in = 0, inlen; + int err; + + spin_lock(&vcrypto->ctrl_lock); + if (!ctx->session_valid) { + err = 0; + goto out; + } + vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; + vcrypto->ctrl.header.opcode = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION); + vcrypto->ctrl.header.queue_id = 0; + + destroy_session = &vcrypto->ctrl.u.destroy_session; + destroy_session->session_id = cpu_to_le64(ctx->session_id); + + sg_init_one(&outhdr_sg, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); + sgs[num_out++] = &outhdr_sg; + + sg_init_one(&inhdr_sg, &vcrypto->ctrl_status.status, sizeof(vcrypto->ctrl_status.status)); + sgs[num_out + num_in++] = &inhdr_sg; + + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); + if (err < 0) + goto out; + + virtqueue_kick(vcrypto->ctrl_vq); + while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && + !virtqueue_is_broken(vcrypto->ctrl_vq)) + cpu_relax(); + + if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { + err = -EINVAL; + goto out; + } + + err = 0; + ctx->session_valid = false; + +out: + spin_unlock(&vcrypto->ctrl_lock); + if (err < 0) { + pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", + vcrypto->ctrl_status.status, destroy_session->session_id); + } + + return err; +} + +static int __virtio_crypto_akcipher_do_req(struct virtio_crypto_akcipher_request *vc_akcipher_req, + struct akcipher_request *req, struct data_queue *data_vq) +{ + struct virtio_crypto_akcipher_ctx *ctx = vc_akcipher_req->akcipher_ctx; + struct virtio_crypto_request *vc_req = &vc_akcipher_req->base; + struct virtio_crypto *vcrypto = ctx->vcrypto; + struct virtio_crypto_op_data_req *req_data = vc_req->req_data; + struct scatterlist *sgs[4], outhdr_sg, inhdr_sg, srcdata_sg, dstdata_sg; + void *src_buf = NULL, *dst_buf = NULL; + unsigned int num_out = 0, num_in = 0; + int node = dev_to_node(&vcrypto->vdev->dev); + unsigned long flags; + int ret = -ENOMEM; + bool verify = vc_akcipher_req->opcode == VIRTIO_CRYPTO_AKCIPHER_VERIFY; + unsigned int src_len = verify ? req->src_len + req->dst_len : req->src_len; + + /* out header */ + sg_init_one(&outhdr_sg, req_data, sizeof(*req_data)); + sgs[num_out++] = &outhdr_sg; + + /* src data */ + src_buf = kcalloc_node(src_len, 1, GFP_KERNEL, node); + if (!src_buf) + goto err; + + if (verify) { + /* for verify operation, both src and dst data work as OUT direction */ + sg_copy_to_buffer(req->src, sg_nents(req->src), src_buf, src_len); + sg_init_one(&srcdata_sg, src_buf, src_len); + sgs[num_out++] = &srcdata_sg; + } else { + sg_copy_to_buffer(req->src, sg_nents(req->src), src_buf, src_len); + sg_init_one(&srcdata_sg, src_buf, src_len); + sgs[num_out++] = &srcdata_sg; + + /* dst data */ + dst_buf = kcalloc_node(req->dst_len, 1, GFP_KERNEL, node); + if (!dst_buf) + goto err; + + sg_init_one(&dstdata_sg, dst_buf, req->dst_len); + sgs[num_out + num_in++] = &dstdata_sg; + } + + vc_akcipher_req->src_buf = src_buf; + vc_akcipher_req->dst_buf = dst_buf; + + /* in header */ + sg_init_one(&inhdr_sg, &vc_req->status, sizeof(vc_req->status)); + sgs[num_out + num_in++] = &inhdr_sg; + + spin_lock_irqsave(&data_vq->lock, flags); + ret = virtqueue_add_sgs(data_vq->vq, sgs, num_out, num_in, vc_req, GFP_ATOMIC); + virtqueue_kick(data_vq->vq); + spin_unlock_irqrestore(&data_vq->lock, flags); + if (ret) + goto err; + + return 0; + +err: + kfree(src_buf); + kfree(dst_buf); + + return -ENOMEM; +} + +static int virtio_crypto_rsa_do_req(struct crypto_engine *engine, void *vreq) +{ + struct akcipher_request *req = container_of(vreq, struct akcipher_request, base); + struct virtio_crypto_akcipher_request *vc_akcipher_req = akcipher_request_ctx(req); + struct virtio_crypto_request *vc_req = &vc_akcipher_req->base; + struct virtio_crypto_akcipher_ctx *ctx = vc_akcipher_req->akcipher_ctx; + struct virtio_crypto *vcrypto = ctx->vcrypto; + struct data_queue *data_vq = vc_req->dataq; + struct virtio_crypto_op_header *header; + struct virtio_crypto_akcipher_data_req *akcipher_req; + int ret; + + vc_req->sgs = NULL; + vc_req->req_data = kzalloc_node(sizeof(*vc_req->req_data), + GFP_KERNEL, dev_to_node(&vcrypto->vdev->dev)); + if (!vc_req->req_data) + return -ENOMEM; + + /* build request header */ + header = &vc_req->req_data->header; + header->opcode = cpu_to_le32(vc_akcipher_req->opcode); + header->algo = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_RSA); + header->session_id = cpu_to_le64(ctx->session_id); + + /* build request akcipher data */ + akcipher_req = &vc_req->req_data->u.akcipher_req; + akcipher_req->para.src_data_len = cpu_to_le32(req->src_len); + akcipher_req->para.dst_data_len = cpu_to_le32(req->dst_len); + + ret = __virtio_crypto_akcipher_do_req(vc_akcipher_req, req, data_vq); + if (ret < 0) { + kfree_sensitive(vc_req->req_data); + vc_req->req_data = NULL; + return ret; + } + + return 0; +} + +static int virtio_crypto_rsa_req(struct akcipher_request *req, uint32_t opcode) +{ + struct crypto_akcipher *atfm = crypto_akcipher_reqtfm(req); + struct virtio_crypto_akcipher_ctx *ctx = akcipher_tfm_ctx(atfm); + struct virtio_crypto_akcipher_request *vc_akcipher_req = akcipher_request_ctx(req); + struct virtio_crypto_request *vc_req = &vc_akcipher_req->base; + struct virtio_crypto *vcrypto = ctx->vcrypto; + /* Use the first data virtqueue as default */ + struct data_queue *data_vq = &vcrypto->data_vq[0]; + + vc_req->dataq = data_vq; + vc_req->alg_cb = virtio_crypto_dataq_akcipher_callback; + vc_akcipher_req->akcipher_ctx = ctx; + vc_akcipher_req->akcipher_req = req; + vc_akcipher_req->opcode = opcode; + + return crypto_transfer_akcipher_request_to_engine(data_vq->engine, req); +} + +static int virtio_crypto_rsa_encrypt(struct akcipher_request *req) +{ + return virtio_crypto_rsa_req(req, VIRTIO_CRYPTO_AKCIPHER_ENCRYPT); +} + +static int virtio_crypto_rsa_decrypt(struct akcipher_request *req) +{ + return virtio_crypto_rsa_req(req, VIRTIO_CRYPTO_AKCIPHER_DECRYPT); +} + +static int virtio_crypto_rsa_sign(struct akcipher_request *req) +{ + return virtio_crypto_rsa_req(req, VIRTIO_CRYPTO_AKCIPHER_SIGN); +} + +static int virtio_crypto_rsa_verify(struct akcipher_request *req) +{ + return virtio_crypto_rsa_req(req, VIRTIO_CRYPTO_AKCIPHER_VERIFY); +} + +static int virtio_crypto_rsa_set_key(struct crypto_akcipher *tfm, + const void *key, + unsigned int keylen, + bool private, + int padding_algo, + int hash_algo) +{ + struct virtio_crypto_akcipher_ctx *ctx = akcipher_tfm_ctx(tfm); + struct virtio_crypto_rsa_ctx *rsa_ctx = &ctx->rsa_ctx; + struct virtio_crypto *vcrypto; + struct virtio_crypto_ctrl_header header; + struct virtio_crypto_akcipher_session_para para; + struct rsa_key rsa_key = {0}; + int node = virtio_crypto_get_current_node(); + uint32_t keytype; + int ret; + + /* mpi_free will test n, just free it. */ + mpi_free(rsa_ctx->n); + rsa_ctx->n = NULL; + + if (private) { + keytype = VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PRIVATE; + ret = rsa_parse_priv_key(&rsa_key, key, keylen); + } else { + keytype = VIRTIO_CRYPTO_AKCIPHER_KEY_TYPE_PUBLIC; + ret = rsa_parse_pub_key(&rsa_key, key, keylen); + } + + if (ret) + return ret; + + rsa_ctx->n = mpi_read_raw_data(rsa_key.n, rsa_key.n_sz); + if (!rsa_ctx->n) + return -ENOMEM; + + if (!ctx->vcrypto) { + vcrypto = virtcrypto_get_dev_node(node, VIRTIO_CRYPTO_SERVICE_AKCIPHER, + VIRTIO_CRYPTO_AKCIPHER_RSA); + if (!vcrypto) { + pr_err("virtio_crypto: Could not find a virtio device in the system or unsupported algo\n"); + return -ENODEV; + } + + ctx->vcrypto = vcrypto; + } else { + virtio_crypto_alg_akcipher_close_session(ctx); + } + + /* set ctrl header */ + header.opcode = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_CREATE_SESSION); + header.algo = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_RSA); + header.queue_id = 0; + + /* set RSA para */ + para.algo = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_RSA); + para.keytype = cpu_to_le32(keytype); + para.keylen = cpu_to_le32(keylen); + para.u.rsa.padding_algo = cpu_to_le32(padding_algo); + para.u.rsa.hash_algo = cpu_to_le32(hash_algo); + + return virtio_crypto_alg_akcipher_init_session(ctx, &header, ¶, key, keylen); +} + +static int virtio_crypto_rsa_raw_set_priv_key(struct crypto_akcipher *tfm, + const void *key, + unsigned int keylen) +{ + return virtio_crypto_rsa_set_key(tfm, key, keylen, 1, + VIRTIO_CRYPTO_RSA_RAW_PADDING, + VIRTIO_CRYPTO_RSA_NO_HASH); +} + + +static int virtio_crypto_p1pad_rsa_sha1_set_priv_key(struct crypto_akcipher *tfm, + const void *key, + unsigned int keylen) +{ + return virtio_crypto_rsa_set_key(tfm, key, keylen, 1, + VIRTIO_CRYPTO_RSA_PKCS1_PADDING, + VIRTIO_CRYPTO_RSA_SHA1); +} + +static int virtio_crypto_rsa_raw_set_pub_key(struct crypto_akcipher *tfm, + const void *key, + unsigned int keylen) +{ + return virtio_crypto_rsa_set_key(tfm, key, keylen, 0, + VIRTIO_CRYPTO_RSA_RAW_PADDING, + VIRTIO_CRYPTO_RSA_NO_HASH); +} + +static int virtio_crypto_p1pad_rsa_sha1_set_pub_key(struct crypto_akcipher *tfm, + const void *key, + unsigned int keylen) +{ + return virtio_crypto_rsa_set_key(tfm, key, keylen, 0, + VIRTIO_CRYPTO_RSA_PKCS1_PADDING, + VIRTIO_CRYPTO_RSA_SHA1); +} + +static unsigned int virtio_crypto_rsa_max_size(struct crypto_akcipher *tfm) +{ + struct virtio_crypto_akcipher_ctx *ctx = akcipher_tfm_ctx(tfm); + struct virtio_crypto_rsa_ctx *rsa_ctx = &ctx->rsa_ctx; + + return mpi_get_size(rsa_ctx->n); +} + +static int virtio_crypto_rsa_init_tfm(struct crypto_akcipher *tfm) +{ + struct virtio_crypto_akcipher_ctx *ctx = akcipher_tfm_ctx(tfm); + + ctx->tfm = tfm; + ctx->enginectx.op.do_one_request = virtio_crypto_rsa_do_req; + ctx->enginectx.op.prepare_request = NULL; + ctx->enginectx.op.unprepare_request = NULL; + + return 0; +} + +static void virtio_crypto_rsa_exit_tfm(struct crypto_akcipher *tfm) +{ + struct virtio_crypto_akcipher_ctx *ctx = akcipher_tfm_ctx(tfm); + struct virtio_crypto_rsa_ctx *rsa_ctx = &ctx->rsa_ctx; + + virtio_crypto_alg_akcipher_close_session(ctx); + virtcrypto_dev_put(ctx->vcrypto); + mpi_free(rsa_ctx->n); + rsa_ctx->n = NULL; +} + +static struct virtio_crypto_akcipher_algo virtio_crypto_akcipher_algs[] = { + { + .algonum = VIRTIO_CRYPTO_AKCIPHER_RSA, + .service = VIRTIO_CRYPTO_SERVICE_AKCIPHER, + .algo = { + .encrypt = virtio_crypto_rsa_encrypt, + .decrypt = virtio_crypto_rsa_decrypt, + .set_pub_key = virtio_crypto_rsa_raw_set_pub_key, + .set_priv_key = virtio_crypto_rsa_raw_set_priv_key, + .max_size = virtio_crypto_rsa_max_size, + .init = virtio_crypto_rsa_init_tfm, + .exit = virtio_crypto_rsa_exit_tfm, + .reqsize = sizeof(struct virtio_crypto_akcipher_request), + .base = { + .cra_name = "rsa", + .cra_driver_name = "virtio-crypto-rsa", + .cra_priority = 150, + .cra_module = THIS_MODULE, + .cra_ctxsize = sizeof(struct virtio_crypto_akcipher_ctx), + }, + }, + }, + { + .algonum = VIRTIO_CRYPTO_AKCIPHER_RSA, + .service = VIRTIO_CRYPTO_SERVICE_AKCIPHER, + .algo = { + .encrypt = virtio_crypto_rsa_encrypt, + .decrypt = virtio_crypto_rsa_decrypt, + .sign = virtio_crypto_rsa_sign, + .verify = virtio_crypto_rsa_verify, + .set_pub_key = virtio_crypto_p1pad_rsa_sha1_set_pub_key, + .set_priv_key = virtio_crypto_p1pad_rsa_sha1_set_priv_key, + .max_size = virtio_crypto_rsa_max_size, + .init = virtio_crypto_rsa_init_tfm, + .exit = virtio_crypto_rsa_exit_tfm, + .reqsize = sizeof(struct virtio_crypto_akcipher_request), + .base = { + .cra_name = "pkcs1pad(rsa,sha1)", + .cra_driver_name = "virtio-pkcs1-rsa-with-sha1", + .cra_priority = 150, + .cra_module = THIS_MODULE, + .cra_ctxsize = sizeof(struct virtio_crypto_akcipher_ctx), + }, + }, + }, +}; + +int virtio_crypto_akcipher_algs_register(struct virtio_crypto *vcrypto) +{ + int ret = 0; + int i = 0; + + mutex_lock(&algs_lock); + + for (i = 0; i < ARRAY_SIZE(virtio_crypto_akcipher_algs); i++) { + uint32_t service = virtio_crypto_akcipher_algs[i].service; + uint32_t algonum = virtio_crypto_akcipher_algs[i].algonum; + + if (!virtcrypto_algo_is_supported(vcrypto, service, algonum)) + continue; + + if (virtio_crypto_akcipher_algs[i].active_devs == 0) { + ret = crypto_register_akcipher(&virtio_crypto_akcipher_algs[i].algo); + if (ret) + goto unlock; + } + + virtio_crypto_akcipher_algs[i].active_devs++; + dev_info(&vcrypto->vdev->dev, "Registered akcipher algo %s\n", + virtio_crypto_akcipher_algs[i].algo.base.cra_name); + } + +unlock: + mutex_unlock(&algs_lock); + return ret; +} + +void virtio_crypto_akcipher_algs_unregister(struct virtio_crypto *vcrypto) +{ + int i = 0; + + mutex_lock(&algs_lock); + + for (i = 0; i < ARRAY_SIZE(virtio_crypto_akcipher_algs); i++) { + uint32_t service = virtio_crypto_akcipher_algs[i].service; + uint32_t algonum = virtio_crypto_akcipher_algs[i].algonum; + + if (virtio_crypto_akcipher_algs[i].active_devs == 0 || + !virtcrypto_algo_is_supported(vcrypto, service, algonum)) + continue; + + if (virtio_crypto_akcipher_algs[i].active_devs == 1) + crypto_unregister_akcipher(&virtio_crypto_akcipher_algs[i].algo); + + virtio_crypto_akcipher_algs[i].active_devs--; + } + + mutex_unlock(&algs_lock); +} diff --git a/drivers/crypto/virtio/virtio_crypto_common.h b/drivers/crypto/virtio/virtio_crypto_common.h index a24f85c589e7..214f9a6fcf84 100644 --- a/drivers/crypto/virtio/virtio_crypto_common.h +++ b/drivers/crypto/virtio/virtio_crypto_common.h @@ -56,6 +56,7 @@ struct virtio_crypto { u32 mac_algo_l; u32 mac_algo_h; u32 aead_algo; + u32 akcipher_algo; /* Maximum length of cipher key */ u32 max_cipher_key_len; @@ -131,5 +132,7 @@ static inline int virtio_crypto_get_current_node(void) int virtio_crypto_algs_register(struct virtio_crypto *vcrypto); void virtio_crypto_algs_unregister(struct virtio_crypto *vcrypto); +int virtio_crypto_akcipher_algs_register(struct virtio_crypto *vcrypto); +void virtio_crypto_akcipher_algs_unregister(struct virtio_crypto *vcrypto); #endif /* _VIRTIO_CRYPTO_COMMON_H */ diff --git a/drivers/crypto/virtio/virtio_crypto_core.c b/drivers/crypto/virtio/virtio_crypto_core.c index 080955a1dd9c..f6eb6d064fbd 100644 --- a/drivers/crypto/virtio/virtio_crypto_core.c +++ b/drivers/crypto/virtio/virtio_crypto_core.c @@ -297,6 +297,7 @@ static int virtcrypto_probe(struct virtio_device *vdev) u32 mac_algo_l = 0; u32 mac_algo_h = 0; u32 aead_algo = 0; + u32 akcipher_algo = 0; u32 crypto_services = 0; if (!virtio_has_feature(vdev, VIRTIO_F_VERSION_1)) @@ -348,6 +349,9 @@ static int virtcrypto_probe(struct virtio_device *vdev) mac_algo_h, &mac_algo_h); virtio_cread_le(vdev, struct virtio_crypto_config, aead_algo, &aead_algo); + if (crypto_services & (1 << VIRTIO_CRYPTO_SERVICE_AKCIPHER)) + virtio_cread_le(vdev, struct virtio_crypto_config, + akcipher_algo, &akcipher_algo); /* Add virtio crypto device to global table */ err = virtcrypto_devmgr_add_dev(vcrypto); @@ -374,7 +378,7 @@ static int virtcrypto_probe(struct virtio_device *vdev) vcrypto->mac_algo_h = mac_algo_h; vcrypto->hash_algo = hash_algo; vcrypto->aead_algo = aead_algo; - + vcrypto->akcipher_algo = akcipher_algo; dev_info(&vdev->dev, "max_queues: %u, max_cipher_key_len: %u, max_auth_key_len: %u, max_size 0x%llx\n", diff --git a/drivers/crypto/virtio/virtio_crypto_mgr.c b/drivers/crypto/virtio/virtio_crypto_mgr.c index 6860f8180c7c..1cb92418b321 100644 --- a/drivers/crypto/virtio/virtio_crypto_mgr.c +++ b/drivers/crypto/virtio/virtio_crypto_mgr.c @@ -242,6 +242,12 @@ int virtcrypto_dev_start(struct virtio_crypto *vcrypto) return -EFAULT; } + if (virtio_crypto_akcipher_algs_register(vcrypto)) { + pr_err("virtio_crypto: Failed to register crypto akcipher algs\n"); + virtio_crypto_algs_unregister(vcrypto); + return -EFAULT; + } + return 0; } @@ -258,6 +264,7 @@ int virtcrypto_dev_start(struct virtio_crypto *vcrypto) void virtcrypto_dev_stop(struct virtio_crypto *vcrypto) { virtio_crypto_algs_unregister(vcrypto); + virtio_crypto_akcipher_algs_unregister(vcrypto); } /* @@ -312,6 +319,10 @@ bool virtcrypto_algo_is_supported(struct virtio_crypto *vcrypto, case VIRTIO_CRYPTO_SERVICE_AEAD: algo_mask = vcrypto->aead_algo; break; + + case VIRTIO_CRYPTO_SERVICE_AKCIPHER: + algo_mask = vcrypto->akcipher_algo; + break; } if (!(algo_mask & (1u << algo))) From 7d386768ef66c49d11a9715075319da196993d3d Mon Sep 17 00:00:00 2001 From: zhenwei pi Date: Fri, 6 May 2022 21:16:23 +0800 Subject: [PATCH 080/288] virtio-crypto: change code style [ Upstream commit 6fd763d155860eb7ea3a93c8b3bf926940ffa3fb ] Use temporary variable to make code easy to read and maintain. /* Pad cipher's parameters */ vcrypto->ctrl.u.sym_create_session.op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo = vcrypto->ctrl.header.algo; vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen = cpu_to_le32(keylen); vcrypto->ctrl.u.sym_create_session.u.cipher.para.op = cpu_to_le32(op); --> sym_create_session = &ctrl->u.sym_create_session; sym_create_session->op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); sym_create_session->u.cipher.para.algo = ctrl->header.algo; sym_create_session->u.cipher.para.keylen = cpu_to_le32(keylen); sym_create_session->u.cipher.para.op = cpu_to_le32(op); The new style shows more obviously: - the variable we want to operate. - an assignment statement in a single line. Cc: Michael S. Tsirkin Cc: Jason Wang Cc: Gonglei Reviewed-by: Gonglei Signed-off-by: zhenwei pi Message-Id: <20220506131627.180784-2-pizhenwei@bytedance.com> Signed-off-by: Michael S. Tsirkin Stable-dep-of: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet") Signed-off-by: Sasha Levin --- .../virtio/virtio_crypto_akcipher_algs.c | 40 ++++++----- drivers/crypto/virtio/virtio_crypto_algs.c | 70 +++++++++---------- 2 files changed, 58 insertions(+), 52 deletions(-) diff --git a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c index f3ec9420215e..20901a263fc8 100644 --- a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c @@ -106,23 +106,27 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher unsigned int inlen; int err; unsigned int num_out = 0, num_in = 0; + struct virtio_crypto_op_ctrl_req *ctrl; + struct virtio_crypto_session_input *input; pkey = kmemdup(key, keylen, GFP_ATOMIC); if (!pkey) return -ENOMEM; spin_lock(&vcrypto->ctrl_lock); - memcpy(&vcrypto->ctrl.header, header, sizeof(vcrypto->ctrl.header)); - memcpy(&vcrypto->ctrl.u, para, sizeof(vcrypto->ctrl.u)); - vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); + ctrl = &vcrypto->ctrl; + memcpy(&ctrl->header, header, sizeof(ctrl->header)); + memcpy(&ctrl->u, para, sizeof(ctrl->u)); + input = &vcrypto->input; + input->status = cpu_to_le32(VIRTIO_CRYPTO_ERR); - sg_init_one(&outhdr_sg, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); + sg_init_one(&outhdr_sg, ctrl, sizeof(*ctrl)); sgs[num_out++] = &outhdr_sg; sg_init_one(&key_sg, pkey, keylen); sgs[num_out++] = &key_sg; - sg_init_one(&inhdr_sg, &vcrypto->input, sizeof(vcrypto->input)); + sg_init_one(&inhdr_sg, input, sizeof(*input)); sgs[num_out + num_in++] = &inhdr_sg; err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); @@ -134,12 +138,12 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher !virtqueue_is_broken(vcrypto->ctrl_vq)) cpu_relax(); - if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { + if (le32_to_cpu(input->status) != VIRTIO_CRYPTO_OK) { err = -EINVAL; goto out; } - ctx->session_id = le64_to_cpu(vcrypto->input.session_id); + ctx->session_id = le64_to_cpu(input->session_id); ctx->session_valid = true; err = 0; @@ -149,7 +153,7 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher if (err < 0) pr_err("virtio_crypto: Create session failed status: %u\n", - le32_to_cpu(vcrypto->input.status)); + le32_to_cpu(input->status)); return err; } @@ -161,23 +165,27 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe struct virtio_crypto *vcrypto = ctx->vcrypto; unsigned int num_out = 0, num_in = 0, inlen; int err; + struct virtio_crypto_op_ctrl_req *ctrl; + struct virtio_crypto_inhdr *ctrl_status; spin_lock(&vcrypto->ctrl_lock); if (!ctx->session_valid) { err = 0; goto out; } - vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; - vcrypto->ctrl.header.opcode = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION); - vcrypto->ctrl.header.queue_id = 0; + ctrl_status = &vcrypto->ctrl_status; + ctrl_status->status = VIRTIO_CRYPTO_ERR; + ctrl = &vcrypto->ctrl; + ctrl->header.opcode = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION); + ctrl->header.queue_id = 0; - destroy_session = &vcrypto->ctrl.u.destroy_session; + destroy_session = &ctrl->u.destroy_session; destroy_session->session_id = cpu_to_le64(ctx->session_id); - sg_init_one(&outhdr_sg, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); + sg_init_one(&outhdr_sg, ctrl, sizeof(*ctrl)); sgs[num_out++] = &outhdr_sg; - sg_init_one(&inhdr_sg, &vcrypto->ctrl_status.status, sizeof(vcrypto->ctrl_status.status)); + sg_init_one(&inhdr_sg, &ctrl_status->status, sizeof(ctrl_status->status)); sgs[num_out + num_in++] = &inhdr_sg; err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); @@ -189,7 +197,7 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe !virtqueue_is_broken(vcrypto->ctrl_vq)) cpu_relax(); - if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { + if (ctrl_status->status != VIRTIO_CRYPTO_OK) { err = -EINVAL; goto out; } @@ -201,7 +209,7 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe spin_unlock(&vcrypto->ctrl_lock); if (err < 0) { pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", - vcrypto->ctrl_status.status, destroy_session->session_id); + ctrl_status->status, destroy_session->session_id); } return err; diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c b/drivers/crypto/virtio/virtio_crypto_algs.c index 583c0b535d13..12e2001235a6 100644 --- a/drivers/crypto/virtio/virtio_crypto_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_algs.c @@ -123,6 +123,9 @@ static int virtio_crypto_alg_skcipher_init_session( int op = encrypt ? VIRTIO_CRYPTO_OP_ENCRYPT : VIRTIO_CRYPTO_OP_DECRYPT; int err; unsigned int num_out = 0, num_in = 0; + struct virtio_crypto_op_ctrl_req *ctrl; + struct virtio_crypto_session_input *input; + struct virtio_crypto_sym_create_session_req *sym_create_session; /* * Avoid to do DMA from the stack, switch to using @@ -135,24 +138,22 @@ static int virtio_crypto_alg_skcipher_init_session( spin_lock(&vcrypto->ctrl_lock); /* Pad ctrl header */ - vcrypto->ctrl.header.opcode = - cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); - vcrypto->ctrl.header.algo = cpu_to_le32(alg); + ctrl = &vcrypto->ctrl; + ctrl->header.opcode = cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); + ctrl->header.algo = cpu_to_le32(alg); /* Set the default dataqueue id to 0 */ - vcrypto->ctrl.header.queue_id = 0; + ctrl->header.queue_id = 0; - vcrypto->input.status = cpu_to_le32(VIRTIO_CRYPTO_ERR); + input = &vcrypto->input; + input->status = cpu_to_le32(VIRTIO_CRYPTO_ERR); /* Pad cipher's parameters */ - vcrypto->ctrl.u.sym_create_session.op_type = - cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); - vcrypto->ctrl.u.sym_create_session.u.cipher.para.algo = - vcrypto->ctrl.header.algo; - vcrypto->ctrl.u.sym_create_session.u.cipher.para.keylen = - cpu_to_le32(keylen); - vcrypto->ctrl.u.sym_create_session.u.cipher.para.op = - cpu_to_le32(op); + sym_create_session = &ctrl->u.sym_create_session; + sym_create_session->op_type = cpu_to_le32(VIRTIO_CRYPTO_SYM_OP_CIPHER); + sym_create_session->u.cipher.para.algo = ctrl->header.algo; + sym_create_session->u.cipher.para.keylen = cpu_to_le32(keylen); + sym_create_session->u.cipher.para.op = cpu_to_le32(op); - sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); + sg_init_one(&outhdr, ctrl, sizeof(*ctrl)); sgs[num_out++] = &outhdr; /* Set key */ @@ -160,7 +161,7 @@ static int virtio_crypto_alg_skcipher_init_session( sgs[num_out++] = &key_sg; /* Return status and session id back */ - sg_init_one(&inhdr, &vcrypto->input, sizeof(vcrypto->input)); + sg_init_one(&inhdr, input, sizeof(*input)); sgs[num_out + num_in++] = &inhdr; err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, @@ -180,20 +181,18 @@ static int virtio_crypto_alg_skcipher_init_session( !virtqueue_is_broken(vcrypto->ctrl_vq)) cpu_relax(); - if (le32_to_cpu(vcrypto->input.status) != VIRTIO_CRYPTO_OK) { + if (le32_to_cpu(input->status) != VIRTIO_CRYPTO_OK) { spin_unlock(&vcrypto->ctrl_lock); pr_err("virtio_crypto: Create session failed status: %u\n", - le32_to_cpu(vcrypto->input.status)); + le32_to_cpu(input->status)); kfree_sensitive(cipher_key); return -EINVAL; } if (encrypt) - ctx->enc_sess_info.session_id = - le64_to_cpu(vcrypto->input.session_id); + ctx->enc_sess_info.session_id = le64_to_cpu(input->session_id); else - ctx->dec_sess_info.session_id = - le64_to_cpu(vcrypto->input.session_id); + ctx->dec_sess_info.session_id = le64_to_cpu(input->session_id); spin_unlock(&vcrypto->ctrl_lock); @@ -211,30 +210,30 @@ static int virtio_crypto_alg_skcipher_close_session( struct virtio_crypto *vcrypto = ctx->vcrypto; int err; unsigned int num_out = 0, num_in = 0; + struct virtio_crypto_op_ctrl_req *ctrl; + struct virtio_crypto_inhdr *ctrl_status; spin_lock(&vcrypto->ctrl_lock); - vcrypto->ctrl_status.status = VIRTIO_CRYPTO_ERR; + ctrl_status = &vcrypto->ctrl_status; + ctrl_status->status = VIRTIO_CRYPTO_ERR; /* Pad ctrl header */ - vcrypto->ctrl.header.opcode = - cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); + ctrl = &vcrypto->ctrl; + ctrl->header.opcode = cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); /* Set the default virtqueue id to 0 */ - vcrypto->ctrl.header.queue_id = 0; + ctrl->header.queue_id = 0; - destroy_session = &vcrypto->ctrl.u.destroy_session; + destroy_session = &ctrl->u.destroy_session; if (encrypt) - destroy_session->session_id = - cpu_to_le64(ctx->enc_sess_info.session_id); + destroy_session->session_id = cpu_to_le64(ctx->enc_sess_info.session_id); else - destroy_session->session_id = - cpu_to_le64(ctx->dec_sess_info.session_id); + destroy_session->session_id = cpu_to_le64(ctx->dec_sess_info.session_id); - sg_init_one(&outhdr, &vcrypto->ctrl, sizeof(vcrypto->ctrl)); + sg_init_one(&outhdr, ctrl, sizeof(*ctrl)); sgs[num_out++] = &outhdr; /* Return status and session id back */ - sg_init_one(&status_sg, &vcrypto->ctrl_status.status, - sizeof(vcrypto->ctrl_status.status)); + sg_init_one(&status_sg, &ctrl_status->status, sizeof(ctrl_status->status)); sgs[num_out + num_in++] = &status_sg; err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, @@ -249,11 +248,10 @@ static int virtio_crypto_alg_skcipher_close_session( !virtqueue_is_broken(vcrypto->ctrl_vq)) cpu_relax(); - if (vcrypto->ctrl_status.status != VIRTIO_CRYPTO_OK) { + if (ctrl_status->status != VIRTIO_CRYPTO_OK) { spin_unlock(&vcrypto->ctrl_lock); pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", - vcrypto->ctrl_status.status, - destroy_session->session_id); + ctrl_status->status, destroy_session->session_id); return -EINVAL; } From 4ee475e76b5ea8061970a7c867ffa5eedeb39580 Mon Sep 17 00:00:00 2001 From: zhenwei pi Date: Fri, 6 May 2022 21:16:24 +0800 Subject: [PATCH 081/288] virtio-crypto: use private buffer for control request [ Upstream commit 0756ad15b1fef287d4d8fa11bc36ea77a5c42e4a ] Originally, all of the control requests share a single buffer( ctrl & input & ctrl_status fields in struct virtio_crypto), this allows queue depth 1 only, the performance of control queue gets limited by this design. In this patch, each request allocates request buffer dynamically, and free buffer after request, so the scope protected by ctrl_lock also get optimized here. It's possible to optimize control queue depth in the next step. A necessary comment is already in code, still describe it again: /* * Note: there are padding fields in request, clear them to zero before * sending to host to avoid to divulge any information. * Ex, virtio_crypto_ctrl_request::ctrl::u::destroy_session::padding[48] */ So use kzalloc to allocate buffer of struct virtio_crypto_ctrl_request. Potentially dereferencing uninitialized variables: Reported-by: kernel test robot Reported-by: Dan Carpenter Cc: Michael S. Tsirkin Cc: Jason Wang Cc: Gonglei Reviewed-by: Gonglei Signed-off-by: zhenwei pi Message-Id: <20220506131627.180784-3-pizhenwei@bytedance.com> Signed-off-by: Michael S. Tsirkin Stable-dep-of: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet") Signed-off-by: Sasha Levin --- .../virtio/virtio_crypto_akcipher_algs.c | 57 ++++++++++++------- drivers/crypto/virtio/virtio_crypto_algs.c | 50 ++++++++++------ drivers/crypto/virtio/virtio_crypto_common.h | 17 ++++-- 3 files changed, 79 insertions(+), 45 deletions(-) diff --git a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c index 20901a263fc8..698ea57e2649 100644 --- a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c @@ -108,16 +108,22 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher unsigned int num_out = 0, num_in = 0; struct virtio_crypto_op_ctrl_req *ctrl; struct virtio_crypto_session_input *input; + struct virtio_crypto_ctrl_request *vc_ctrl_req; pkey = kmemdup(key, keylen, GFP_ATOMIC); if (!pkey) return -ENOMEM; - spin_lock(&vcrypto->ctrl_lock); - ctrl = &vcrypto->ctrl; + vc_ctrl_req = kzalloc(sizeof(*vc_ctrl_req), GFP_KERNEL); + if (!vc_ctrl_req) { + err = -ENOMEM; + goto out; + } + + ctrl = &vc_ctrl_req->ctrl; memcpy(&ctrl->header, header, sizeof(ctrl->header)); memcpy(&ctrl->u, para, sizeof(ctrl->u)); - input = &vcrypto->input; + input = &vc_ctrl_req->input; input->status = cpu_to_le32(VIRTIO_CRYPTO_ERR); sg_init_one(&outhdr_sg, ctrl, sizeof(*ctrl)); @@ -129,16 +135,22 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher sg_init_one(&inhdr_sg, input, sizeof(*input)); sgs[num_out + num_in++] = &inhdr_sg; + spin_lock(&vcrypto->ctrl_lock); err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); - if (err < 0) + if (err < 0) { + spin_unlock(&vcrypto->ctrl_lock); goto out; + } virtqueue_kick(vcrypto->ctrl_vq); while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && !virtqueue_is_broken(vcrypto->ctrl_vq)) cpu_relax(); + spin_unlock(&vcrypto->ctrl_lock); if (le32_to_cpu(input->status) != VIRTIO_CRYPTO_OK) { + pr_err("virtio_crypto: Create session failed status: %u\n", + le32_to_cpu(input->status)); err = -EINVAL; goto out; } @@ -148,13 +160,9 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher err = 0; out: - spin_unlock(&vcrypto->ctrl_lock); + kfree(vc_ctrl_req); kfree_sensitive(pkey); - if (err < 0) - pr_err("virtio_crypto: Create session failed status: %u\n", - le32_to_cpu(input->status)); - return err; } @@ -167,15 +175,18 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe int err; struct virtio_crypto_op_ctrl_req *ctrl; struct virtio_crypto_inhdr *ctrl_status; + struct virtio_crypto_ctrl_request *vc_ctrl_req; - spin_lock(&vcrypto->ctrl_lock); - if (!ctx->session_valid) { - err = 0; - goto out; - } - ctrl_status = &vcrypto->ctrl_status; + if (!ctx->session_valid) + return 0; + + vc_ctrl_req = kzalloc(sizeof(*vc_ctrl_req), GFP_KERNEL); + if (!vc_ctrl_req) + return -ENOMEM; + + ctrl_status = &vc_ctrl_req->ctrl_status; ctrl_status->status = VIRTIO_CRYPTO_ERR; - ctrl = &vcrypto->ctrl; + ctrl = &vc_ctrl_req->ctrl; ctrl->header.opcode = cpu_to_le32(VIRTIO_CRYPTO_AKCIPHER_DESTROY_SESSION); ctrl->header.queue_id = 0; @@ -188,16 +199,22 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe sg_init_one(&inhdr_sg, &ctrl_status->status, sizeof(ctrl_status->status)); sgs[num_out + num_in++] = &inhdr_sg; + spin_lock(&vcrypto->ctrl_lock); err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); - if (err < 0) + if (err < 0) { + spin_unlock(&vcrypto->ctrl_lock); goto out; + } virtqueue_kick(vcrypto->ctrl_vq); while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && !virtqueue_is_broken(vcrypto->ctrl_vq)) cpu_relax(); + spin_unlock(&vcrypto->ctrl_lock); if (ctrl_status->status != VIRTIO_CRYPTO_OK) { + pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", + ctrl_status->status, destroy_session->session_id); err = -EINVAL; goto out; } @@ -206,11 +223,7 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe ctx->session_valid = false; out: - spin_unlock(&vcrypto->ctrl_lock); - if (err < 0) { - pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", - ctrl_status->status, destroy_session->session_id); - } + kfree(vc_ctrl_req); return err; } diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c b/drivers/crypto/virtio/virtio_crypto_algs.c index 12e2001235a6..50601398f35c 100644 --- a/drivers/crypto/virtio/virtio_crypto_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_algs.c @@ -126,6 +126,7 @@ static int virtio_crypto_alg_skcipher_init_session( struct virtio_crypto_op_ctrl_req *ctrl; struct virtio_crypto_session_input *input; struct virtio_crypto_sym_create_session_req *sym_create_session; + struct virtio_crypto_ctrl_request *vc_ctrl_req; /* * Avoid to do DMA from the stack, switch to using @@ -136,15 +137,20 @@ static int virtio_crypto_alg_skcipher_init_session( if (!cipher_key) return -ENOMEM; - spin_lock(&vcrypto->ctrl_lock); + vc_ctrl_req = kzalloc(sizeof(*vc_ctrl_req), GFP_KERNEL); + if (!vc_ctrl_req) { + err = -ENOMEM; + goto out; + } + /* Pad ctrl header */ - ctrl = &vcrypto->ctrl; + ctrl = &vc_ctrl_req->ctrl; ctrl->header.opcode = cpu_to_le32(VIRTIO_CRYPTO_CIPHER_CREATE_SESSION); ctrl->header.algo = cpu_to_le32(alg); /* Set the default dataqueue id to 0 */ ctrl->header.queue_id = 0; - input = &vcrypto->input; + input = &vc_ctrl_req->input; input->status = cpu_to_le32(VIRTIO_CRYPTO_ERR); /* Pad cipher's parameters */ sym_create_session = &ctrl->u.sym_create_session; @@ -164,12 +170,12 @@ static int virtio_crypto_alg_skcipher_init_session( sg_init_one(&inhdr, input, sizeof(*input)); sgs[num_out + num_in++] = &inhdr; + spin_lock(&vcrypto->ctrl_lock); err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); if (err < 0) { spin_unlock(&vcrypto->ctrl_lock); - kfree_sensitive(cipher_key); - return err; + goto out; } virtqueue_kick(vcrypto->ctrl_vq); @@ -180,13 +186,13 @@ static int virtio_crypto_alg_skcipher_init_session( while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && !virtqueue_is_broken(vcrypto->ctrl_vq)) cpu_relax(); + spin_unlock(&vcrypto->ctrl_lock); if (le32_to_cpu(input->status) != VIRTIO_CRYPTO_OK) { - spin_unlock(&vcrypto->ctrl_lock); pr_err("virtio_crypto: Create session failed status: %u\n", le32_to_cpu(input->status)); - kfree_sensitive(cipher_key); - return -EINVAL; + err = -EINVAL; + goto out; } if (encrypt) @@ -194,10 +200,11 @@ static int virtio_crypto_alg_skcipher_init_session( else ctx->dec_sess_info.session_id = le64_to_cpu(input->session_id); - spin_unlock(&vcrypto->ctrl_lock); - + err = 0; +out: + kfree(vc_ctrl_req); kfree_sensitive(cipher_key); - return 0; + return err; } static int virtio_crypto_alg_skcipher_close_session( @@ -212,12 +219,16 @@ static int virtio_crypto_alg_skcipher_close_session( unsigned int num_out = 0, num_in = 0; struct virtio_crypto_op_ctrl_req *ctrl; struct virtio_crypto_inhdr *ctrl_status; + struct virtio_crypto_ctrl_request *vc_ctrl_req; - spin_lock(&vcrypto->ctrl_lock); - ctrl_status = &vcrypto->ctrl_status; + vc_ctrl_req = kzalloc(sizeof(*vc_ctrl_req), GFP_KERNEL); + if (!vc_ctrl_req) + return -ENOMEM; + + ctrl_status = &vc_ctrl_req->ctrl_status; ctrl_status->status = VIRTIO_CRYPTO_ERR; /* Pad ctrl header */ - ctrl = &vcrypto->ctrl; + ctrl = &vc_ctrl_req->ctrl; ctrl->header.opcode = cpu_to_le32(VIRTIO_CRYPTO_CIPHER_DESTROY_SESSION); /* Set the default virtqueue id to 0 */ ctrl->header.queue_id = 0; @@ -236,28 +247,31 @@ static int virtio_crypto_alg_skcipher_close_session( sg_init_one(&status_sg, &ctrl_status->status, sizeof(ctrl_status->status)); sgs[num_out + num_in++] = &status_sg; + spin_lock(&vcrypto->ctrl_lock); err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); if (err < 0) { spin_unlock(&vcrypto->ctrl_lock); - return err; + goto out; } virtqueue_kick(vcrypto->ctrl_vq); while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && !virtqueue_is_broken(vcrypto->ctrl_vq)) cpu_relax(); + spin_unlock(&vcrypto->ctrl_lock); if (ctrl_status->status != VIRTIO_CRYPTO_OK) { - spin_unlock(&vcrypto->ctrl_lock); pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", ctrl_status->status, destroy_session->session_id); return -EINVAL; } - spin_unlock(&vcrypto->ctrl_lock); - return 0; + err = 0; +out: + kfree(vc_ctrl_req); + return err; } static int virtio_crypto_alg_skcipher_init_sessions( diff --git a/drivers/crypto/virtio/virtio_crypto_common.h b/drivers/crypto/virtio/virtio_crypto_common.h index 214f9a6fcf84..e9ecbda6affe 100644 --- a/drivers/crypto/virtio/virtio_crypto_common.h +++ b/drivers/crypto/virtio/virtio_crypto_common.h @@ -13,6 +13,7 @@ #include #include #include +#include /* Internal representation of a data virtqueue */ @@ -65,11 +66,6 @@ struct virtio_crypto { /* Maximum size of per request */ u64 max_size; - /* Control VQ buffers: protected by the ctrl_lock */ - struct virtio_crypto_op_ctrl_req ctrl; - struct virtio_crypto_session_input input; - struct virtio_crypto_inhdr ctrl_status; - unsigned long status; atomic_t ref_count; struct list_head list; @@ -85,6 +81,17 @@ struct virtio_crypto_sym_session_info { __u64 session_id; }; +/* + * Note: there are padding fields in request, clear them to zero before + * sending to host to avoid to divulge any information. + * Ex, virtio_crypto_ctrl_request::ctrl::u::destroy_session::padding[48] + */ +struct virtio_crypto_ctrl_request { + struct virtio_crypto_op_ctrl_req ctrl; + struct virtio_crypto_session_input input; + struct virtio_crypto_inhdr ctrl_status; +}; + struct virtio_crypto_request; typedef void (*virtio_crypto_data_callback) (struct virtio_crypto_request *vc_req, int len); From 0dee72f9b7ba6972bc94a8952536ce1eae707bf6 Mon Sep 17 00:00:00 2001 From: zhenwei pi Date: Fri, 6 May 2022 21:16:25 +0800 Subject: [PATCH 082/288] virtio-crypto: wait ctrl queue instead of busy polling [ Upstream commit 977231e8d45657871a86fe3c7bed94921d04e447 ] Originally, after submitting request into virtio crypto control queue, the guest side polls the result from the virt queue. This works like following: CPU0 CPU1 ... CPUx CPUy | | | | \ \ / / \--------spin_lock(&vcrypto->ctrl_lock)-------/ | virtqueue add & kick | busy poll virtqueue | spin_unlock(&vcrypto->ctrl_lock) ... There are two problems: 1, The queue depth is always 1, the performance of a virtio crypto device gets limited. Multi user processes share a single control queue, and hit spin lock race from control queue. Test on Intel Platinum 8260, a single worker gets ~35K/s create/close session operations, and 8 workers get ~40K/s operations with 800% CPU utilization. 2, The control request is supposed to get handled immediately, but in the current implementation of QEMU(v6.2), the vCPU thread kicks another thread to do this work, the latency also gets unstable. Tracking latency of virtio_crypto_alg_akcipher_close_session in 5s: usecs : count distribution 0 -> 1 : 0 | | 2 -> 3 : 7 | | 4 -> 7 : 72 | | 8 -> 15 : 186485 |************************| 16 -> 31 : 687 | | 32 -> 63 : 5 | | 64 -> 127 : 3 | | 128 -> 255 : 1 | | 256 -> 511 : 0 | | 512 -> 1023 : 0 | | 1024 -> 2047 : 0 | | 2048 -> 4095 : 0 | | 4096 -> 8191 : 0 | | 8192 -> 16383 : 2 | | This means that a CPU may hold vcrypto->ctrl_lock as long as 8192~16383us. To improve the performance of control queue, a request on control queue waits completion instead of busy polling to reduce lock racing, and gets completed by control queue callback. CPU0 CPU1 ... CPUx CPUy | | | | \ \ / / \--------spin_lock(&vcrypto->ctrl_lock)-------/ | virtqueue add & kick | ---------spin_unlock(&vcrypto->ctrl_lock)------ / / \ \ | | | | wait wait wait wait Test this patch, the guest side get ~200K/s operations with 300% CPU utilization. Cc: Michael S. Tsirkin Cc: Jason Wang Cc: Gonglei Reviewed-by: Gonglei Signed-off-by: zhenwei pi Message-Id: <20220506131627.180784-4-pizhenwei@bytedance.com> Signed-off-by: Michael S. Tsirkin Stable-dep-of: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet") Signed-off-by: Sasha Levin --- .../virtio/virtio_crypto_akcipher_algs.c | 29 ++--------- drivers/crypto/virtio/virtio_crypto_algs.c | 34 ++---------- drivers/crypto/virtio/virtio_crypto_common.h | 4 ++ drivers/crypto/virtio/virtio_crypto_core.c | 52 ++++++++++++++++++- 4 files changed, 64 insertions(+), 55 deletions(-) diff --git a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c index 698ea57e2649..382ccec9ab12 100644 --- a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c @@ -103,7 +103,6 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher struct scatterlist outhdr_sg, key_sg, inhdr_sg, *sgs[3]; struct virtio_crypto *vcrypto = ctx->vcrypto; uint8_t *pkey; - unsigned int inlen; int err; unsigned int num_out = 0, num_in = 0; struct virtio_crypto_op_ctrl_req *ctrl; @@ -135,18 +134,9 @@ static int virtio_crypto_alg_akcipher_init_session(struct virtio_crypto_akcipher sg_init_one(&inhdr_sg, input, sizeof(*input)); sgs[num_out + num_in++] = &inhdr_sg; - spin_lock(&vcrypto->ctrl_lock); - err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); - if (err < 0) { - spin_unlock(&vcrypto->ctrl_lock); + err = virtio_crypto_ctrl_vq_request(vcrypto, sgs, num_out, num_in, vc_ctrl_req); + if (err < 0) goto out; - } - - virtqueue_kick(vcrypto->ctrl_vq); - while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && - !virtqueue_is_broken(vcrypto->ctrl_vq)) - cpu_relax(); - spin_unlock(&vcrypto->ctrl_lock); if (le32_to_cpu(input->status) != VIRTIO_CRYPTO_OK) { pr_err("virtio_crypto: Create session failed status: %u\n", @@ -171,7 +161,7 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe struct scatterlist outhdr_sg, inhdr_sg, *sgs[2]; struct virtio_crypto_destroy_session_req *destroy_session; struct virtio_crypto *vcrypto = ctx->vcrypto; - unsigned int num_out = 0, num_in = 0, inlen; + unsigned int num_out = 0, num_in = 0; int err; struct virtio_crypto_op_ctrl_req *ctrl; struct virtio_crypto_inhdr *ctrl_status; @@ -199,18 +189,9 @@ static int virtio_crypto_alg_akcipher_close_session(struct virtio_crypto_akciphe sg_init_one(&inhdr_sg, &ctrl_status->status, sizeof(ctrl_status->status)); sgs[num_out + num_in++] = &inhdr_sg; - spin_lock(&vcrypto->ctrl_lock); - err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, num_in, vcrypto, GFP_ATOMIC); - if (err < 0) { - spin_unlock(&vcrypto->ctrl_lock); + err = virtio_crypto_ctrl_vq_request(vcrypto, sgs, num_out, num_in, vc_ctrl_req); + if (err < 0) goto out; - } - - virtqueue_kick(vcrypto->ctrl_vq); - while (!virtqueue_get_buf(vcrypto->ctrl_vq, &inlen) && - !virtqueue_is_broken(vcrypto->ctrl_vq)) - cpu_relax(); - spin_unlock(&vcrypto->ctrl_lock); if (ctrl_status->status != VIRTIO_CRYPTO_OK) { pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c b/drivers/crypto/virtio/virtio_crypto_algs.c index 50601398f35c..32c73e7d8243 100644 --- a/drivers/crypto/virtio/virtio_crypto_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_algs.c @@ -118,7 +118,6 @@ static int virtio_crypto_alg_skcipher_init_session( int encrypt) { struct scatterlist outhdr, key_sg, inhdr, *sgs[3]; - unsigned int tmp; struct virtio_crypto *vcrypto = ctx->vcrypto; int op = encrypt ? VIRTIO_CRYPTO_OP_ENCRYPT : VIRTIO_CRYPTO_OP_DECRYPT; int err; @@ -170,23 +169,9 @@ static int virtio_crypto_alg_skcipher_init_session( sg_init_one(&inhdr, input, sizeof(*input)); sgs[num_out + num_in++] = &inhdr; - spin_lock(&vcrypto->ctrl_lock); - err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, - num_in, vcrypto, GFP_ATOMIC); - if (err < 0) { - spin_unlock(&vcrypto->ctrl_lock); + err = virtio_crypto_ctrl_vq_request(vcrypto, sgs, num_out, num_in, vc_ctrl_req); + if (err < 0) goto out; - } - virtqueue_kick(vcrypto->ctrl_vq); - - /* - * Trapping into the hypervisor, so the request should be - * handled immediately. - */ - while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && - !virtqueue_is_broken(vcrypto->ctrl_vq)) - cpu_relax(); - spin_unlock(&vcrypto->ctrl_lock); if (le32_to_cpu(input->status) != VIRTIO_CRYPTO_OK) { pr_err("virtio_crypto: Create session failed status: %u\n", @@ -212,7 +197,6 @@ static int virtio_crypto_alg_skcipher_close_session( int encrypt) { struct scatterlist outhdr, status_sg, *sgs[2]; - unsigned int tmp; struct virtio_crypto_destroy_session_req *destroy_session; struct virtio_crypto *vcrypto = ctx->vcrypto; int err; @@ -247,19 +231,9 @@ static int virtio_crypto_alg_skcipher_close_session( sg_init_one(&status_sg, &ctrl_status->status, sizeof(ctrl_status->status)); sgs[num_out + num_in++] = &status_sg; - spin_lock(&vcrypto->ctrl_lock); - err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, num_out, - num_in, vcrypto, GFP_ATOMIC); - if (err < 0) { - spin_unlock(&vcrypto->ctrl_lock); + err = virtio_crypto_ctrl_vq_request(vcrypto, sgs, num_out, num_in, vc_ctrl_req); + if (err < 0) goto out; - } - virtqueue_kick(vcrypto->ctrl_vq); - - while (!virtqueue_get_buf(vcrypto->ctrl_vq, &tmp) && - !virtqueue_is_broken(vcrypto->ctrl_vq)) - cpu_relax(); - spin_unlock(&vcrypto->ctrl_lock); if (ctrl_status->status != VIRTIO_CRYPTO_OK) { pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", diff --git a/drivers/crypto/virtio/virtio_crypto_common.h b/drivers/crypto/virtio/virtio_crypto_common.h index e9ecbda6affe..e0dcb247840a 100644 --- a/drivers/crypto/virtio/virtio_crypto_common.h +++ b/drivers/crypto/virtio/virtio_crypto_common.h @@ -90,6 +90,7 @@ struct virtio_crypto_ctrl_request { struct virtio_crypto_op_ctrl_req ctrl; struct virtio_crypto_session_input input; struct virtio_crypto_inhdr ctrl_status; + struct completion compl; }; struct virtio_crypto_request; @@ -141,5 +142,8 @@ int virtio_crypto_algs_register(struct virtio_crypto *vcrypto); void virtio_crypto_algs_unregister(struct virtio_crypto *vcrypto); int virtio_crypto_akcipher_algs_register(struct virtio_crypto *vcrypto); void virtio_crypto_akcipher_algs_unregister(struct virtio_crypto *vcrypto); +int virtio_crypto_ctrl_vq_request(struct virtio_crypto *vcrypto, struct scatterlist *sgs[], + unsigned int out_sgs, unsigned int in_sgs, + struct virtio_crypto_ctrl_request *vc_ctrl_req); #endif /* _VIRTIO_CRYPTO_COMMON_H */ diff --git a/drivers/crypto/virtio/virtio_crypto_core.c b/drivers/crypto/virtio/virtio_crypto_core.c index f6eb6d064fbd..94624f469985 100644 --- a/drivers/crypto/virtio/virtio_crypto_core.c +++ b/drivers/crypto/virtio/virtio_crypto_core.c @@ -22,6 +22,56 @@ virtcrypto_clear_request(struct virtio_crypto_request *vc_req) } } +static void virtio_crypto_ctrlq_callback(struct virtio_crypto_ctrl_request *vc_ctrl_req) +{ + complete(&vc_ctrl_req->compl); +} + +static void virtcrypto_ctrlq_callback(struct virtqueue *vq) +{ + struct virtio_crypto *vcrypto = vq->vdev->priv; + struct virtio_crypto_ctrl_request *vc_ctrl_req; + unsigned long flags; + unsigned int len; + + spin_lock_irqsave(&vcrypto->ctrl_lock, flags); + do { + virtqueue_disable_cb(vq); + while ((vc_ctrl_req = virtqueue_get_buf(vq, &len)) != NULL) { + spin_unlock_irqrestore(&vcrypto->ctrl_lock, flags); + virtio_crypto_ctrlq_callback(vc_ctrl_req); + spin_lock_irqsave(&vcrypto->ctrl_lock, flags); + } + if (unlikely(virtqueue_is_broken(vq))) + break; + } while (!virtqueue_enable_cb(vq)); + spin_unlock_irqrestore(&vcrypto->ctrl_lock, flags); +} + +int virtio_crypto_ctrl_vq_request(struct virtio_crypto *vcrypto, struct scatterlist *sgs[], + unsigned int out_sgs, unsigned int in_sgs, + struct virtio_crypto_ctrl_request *vc_ctrl_req) +{ + int err; + unsigned long flags; + + init_completion(&vc_ctrl_req->compl); + + spin_lock_irqsave(&vcrypto->ctrl_lock, flags); + err = virtqueue_add_sgs(vcrypto->ctrl_vq, sgs, out_sgs, in_sgs, vc_ctrl_req, GFP_ATOMIC); + if (err < 0) { + spin_unlock_irqrestore(&vcrypto->ctrl_lock, flags); + return err; + } + + virtqueue_kick(vcrypto->ctrl_vq); + spin_unlock_irqrestore(&vcrypto->ctrl_lock, flags); + + wait_for_completion(&vc_ctrl_req->compl); + + return 0; +} + static void virtcrypto_dataq_callback(struct virtqueue *vq) { struct virtio_crypto *vcrypto = vq->vdev->priv; @@ -73,7 +123,7 @@ static int virtcrypto_find_vqs(struct virtio_crypto *vi) goto err_names; /* Parameters for control virtqueue */ - callbacks[total_vqs - 1] = NULL; + callbacks[total_vqs - 1] = virtcrypto_ctrlq_callback; names[total_vqs - 1] = "controlq"; /* Allocate/initialize parameters for data virtqueues */ From 0eb69890e86775d178452880ea0d24384c5ccedf Mon Sep 17 00:00:00 2001 From: "Gonglei (Arei)" Date: Mon, 20 Nov 2023 11:49:45 +0000 Subject: [PATCH 083/288] crypto: virtio - Handle dataq logic with tasklet [ Upstream commit fed93fb62e05c38152b0fc1dc9609639e63eed76 ] Doing ipsec produces a spinlock recursion warning. This is due to crypto_finalize_request() being called in the upper half. Move virtual data queue processing of virtio-crypto driver to tasklet. Fixes: dbaf0624ffa57 ("crypto: add virtio-crypto driver") Reported-by: Halil Pasic Signed-off-by: wangyangxin Signed-off-by: Gonglei Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/virtio/virtio_crypto_common.h | 2 ++ drivers/crypto/virtio/virtio_crypto_core.c | 23 +++++++++++--------- 2 files changed, 15 insertions(+), 10 deletions(-) diff --git a/drivers/crypto/virtio/virtio_crypto_common.h b/drivers/crypto/virtio/virtio_crypto_common.h index e0dcb247840a..d61c991d7773 100644 --- a/drivers/crypto/virtio/virtio_crypto_common.h +++ b/drivers/crypto/virtio/virtio_crypto_common.h @@ -10,6 +10,7 @@ #include #include #include +#include #include #include #include @@ -28,6 +29,7 @@ struct data_queue { char name[32]; struct crypto_engine *engine; + struct tasklet_struct done_task; }; struct virtio_crypto { diff --git a/drivers/crypto/virtio/virtio_crypto_core.c b/drivers/crypto/virtio/virtio_crypto_core.c index 94624f469985..630af33929ef 100644 --- a/drivers/crypto/virtio/virtio_crypto_core.c +++ b/drivers/crypto/virtio/virtio_crypto_core.c @@ -72,27 +72,28 @@ int virtio_crypto_ctrl_vq_request(struct virtio_crypto *vcrypto, struct scatterl return 0; } -static void virtcrypto_dataq_callback(struct virtqueue *vq) +static void virtcrypto_done_task(unsigned long data) { - struct virtio_crypto *vcrypto = vq->vdev->priv; + struct data_queue *data_vq = (struct data_queue *)data; + struct virtqueue *vq = data_vq->vq; struct virtio_crypto_request *vc_req; - unsigned long flags; unsigned int len; - unsigned int qid = vq->index; - spin_lock_irqsave(&vcrypto->data_vq[qid].lock, flags); do { virtqueue_disable_cb(vq); while ((vc_req = virtqueue_get_buf(vq, &len)) != NULL) { - spin_unlock_irqrestore( - &vcrypto->data_vq[qid].lock, flags); if (vc_req->alg_cb) vc_req->alg_cb(vc_req, len); - spin_lock_irqsave( - &vcrypto->data_vq[qid].lock, flags); } } while (!virtqueue_enable_cb(vq)); - spin_unlock_irqrestore(&vcrypto->data_vq[qid].lock, flags); +} + +static void virtcrypto_dataq_callback(struct virtqueue *vq) +{ + struct virtio_crypto *vcrypto = vq->vdev->priv; + struct data_queue *dq = &vcrypto->data_vq[vq->index]; + + tasklet_schedule(&dq->done_task); } static int virtcrypto_find_vqs(struct virtio_crypto *vi) @@ -149,6 +150,8 @@ static int virtcrypto_find_vqs(struct virtio_crypto *vi) ret = -ENOMEM; goto err_engine; } + tasklet_init(&vi->data_vq[i].done_task, virtcrypto_done_task, + (unsigned long)&vi->data_vq[i]); } kfree(names); From 95586bb74bf4aba50d27c74c6dfdf860c165dbad Mon Sep 17 00:00:00 2001 From: Chen Ni Date: Mon, 27 Nov 2023 02:03:01 +0000 Subject: [PATCH 084/288] crypto: sa2ul - Return crypto_aead_setkey to transfer the error [ Upstream commit ce852f1308ac738e61c5b2502517deea593a1554 ] Return crypto_aead_setkey() in order to transfer the error if it fails. Fixes: d2c8ac187fc9 ("crypto: sa2ul - Add AEAD algorithm support") Signed-off-by: Chen Ni Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sa2ul.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/crypto/sa2ul.c b/drivers/crypto/sa2ul.c index f15fc1fb3707..0888f4489a76 100644 --- a/drivers/crypto/sa2ul.c +++ b/drivers/crypto/sa2ul.c @@ -1848,9 +1848,8 @@ static int sa_aead_setkey(struct crypto_aead *authenc, crypto_aead_set_flags(ctx->fallback.aead, crypto_aead_get_flags(authenc) & CRYPTO_TFM_REQ_MASK); - crypto_aead_setkey(ctx->fallback.aead, key, keylen); - return 0; + return crypto_aead_setkey(ctx->fallback.aead, key, keylen); } static int sa_aead_setauthsize(struct crypto_aead *tfm, unsigned int authsize) From 97f9d0455bd40b1e8588a7e5c95988f7f3cb8bf0 Mon Sep 17 00:00:00 2001 From: Dinghao Liu Date: Mon, 27 Nov 2023 11:47:10 +0800 Subject: [PATCH 085/288] crypto: ccp - fix memleak in ccp_init_dm_workarea [ Upstream commit a1c95dd5bc1d6a5d7a75a376c2107421b7d6240d ] When dma_map_single() fails, wa->address is supposed to be freed by the callers of ccp_init_dm_workarea() through ccp_dm_free(). However, many of the call spots don't expect to have to call ccp_dm_free() on failure of ccp_init_dm_workarea(), which may lead to a memleak. Let's free wa->address in ccp_init_dm_workarea() when dma_map_single() fails. Fixes: 63b945091a07 ("crypto: ccp - CCP device driver and interface support") Signed-off-by: Dinghao Liu Acked-by: Tom Lendacky Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/ccp/ccp-ops.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/ccp/ccp-ops.c b/drivers/crypto/ccp/ccp-ops.c index c15625e8ff66..7e2fbba945cd 100644 --- a/drivers/crypto/ccp/ccp-ops.c +++ b/drivers/crypto/ccp/ccp-ops.c @@ -179,8 +179,11 @@ static int ccp_init_dm_workarea(struct ccp_dm_workarea *wa, wa->dma.address = dma_map_single(wa->dev, wa->address, len, dir); - if (dma_mapping_error(wa->dev, wa->dma.address)) + if (dma_mapping_error(wa->dev, wa->dma.address)) { + kfree(wa->address); + wa->address = NULL; return -ENOMEM; + } wa->dma.length = len; } From 7f807dc07341e32027d48180955a822b783a05de Mon Sep 17 00:00:00 2001 From: Herbert Xu Date: Tue, 28 Nov 2023 16:25:49 +0800 Subject: [PATCH 086/288] crypto: af_alg - Disallow multiple in-flight AIO requests [ Upstream commit 67b164a871af1d736f131fd6fe78a610909f06f3 ] Having multiple in-flight AIO requests results in unpredictable output because they all share the same IV. Fix this by only allowing one request at a time. Fixes: 83094e5e9e49 ("crypto: af_alg - add async support to algif_aead") Fixes: a596999b7ddf ("crypto: algif - change algif_skcipher to be asynchronous") Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- crypto/af_alg.c | 14 +++++++++++++- include/crypto/if_alg.h | 3 +++ 2 files changed, 16 insertions(+), 1 deletion(-) diff --git a/crypto/af_alg.c b/crypto/af_alg.c index 9acb9d2c4bcf..755e6caf18d2 100644 --- a/crypto/af_alg.c +++ b/crypto/af_alg.c @@ -1039,9 +1039,13 @@ EXPORT_SYMBOL_GPL(af_alg_sendpage); void af_alg_free_resources(struct af_alg_async_req *areq) { struct sock *sk = areq->sk; + struct af_alg_ctx *ctx; af_alg_free_areq_sgls(areq); sock_kfree_s(sk, areq, areq->areqlen); + + ctx = alg_sk(sk)->private; + ctx->inflight = false; } EXPORT_SYMBOL_GPL(af_alg_free_resources); @@ -1105,11 +1109,19 @@ EXPORT_SYMBOL_GPL(af_alg_poll); struct af_alg_async_req *af_alg_alloc_areq(struct sock *sk, unsigned int areqlen) { - struct af_alg_async_req *areq = sock_kmalloc(sk, areqlen, GFP_KERNEL); + struct af_alg_ctx *ctx = alg_sk(sk)->private; + struct af_alg_async_req *areq; + /* Only one AIO request can be in flight. */ + if (ctx->inflight) + return ERR_PTR(-EBUSY); + + areq = sock_kmalloc(sk, areqlen, GFP_KERNEL); if (unlikely(!areq)) return ERR_PTR(-ENOMEM); + ctx->inflight = true; + areq->areqlen = areqlen; areq->sk = sk; areq->last_rsgl = NULL; diff --git a/include/crypto/if_alg.h b/include/crypto/if_alg.h index a5db86670bdf..a406e281ae57 100644 --- a/include/crypto/if_alg.h +++ b/include/crypto/if_alg.h @@ -138,6 +138,7 @@ struct af_alg_async_req { * recvmsg is invoked. * @init: True if metadata has been sent. * @len: Length of memory allocated for this data structure. + * @inflight: Non-zero when AIO requests are in flight. */ struct af_alg_ctx { struct list_head tsgl_list; @@ -156,6 +157,8 @@ struct af_alg_ctx { bool init; unsigned int len; + + unsigned int inflight; }; int af_alg_register_type(const struct af_alg_type *type); From ccdb86c339d54759d82c319498f3812fe9e99e7f Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Fri, 1 Dec 2023 19:06:19 +0200 Subject: [PATCH 087/288] crypto: sahara - remove FLAGS_NEW_KEY logic [ Upstream commit 8fd183435728b139248a77978ea3732039341779 ] Remove the FLAGS_NEW_KEY logic as it has the following issues: - the wrong key may end up being used when there are multiple data streams: t1 t2 setkey() encrypt() setkey() encrypt() encrypt() <--- key from t2 is used - switching between encryption and decryption with the same key is not possible, as the hdr flags are only updated when a new setkey() is performed With this change, the key is always sent along with the cryptdata when performing encryption/decryption operations. Fixes: 5de8875281e1 ("crypto: sahara - Add driver for SAHARA2 accelerator.") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 36 ++++++++++++++---------------------- 1 file changed, 14 insertions(+), 22 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index 2043dd061121..0ae95767bb76 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -43,7 +43,6 @@ #define FLAGS_MODE_MASK 0x000f #define FLAGS_ENCRYPT BIT(0) #define FLAGS_CBC BIT(1) -#define FLAGS_NEW_KEY BIT(3) #define SAHARA_HDR_BASE 0x00800000 #define SAHARA_HDR_SKHA_ALG_AES 0 @@ -141,8 +140,6 @@ struct sahara_hw_link { }; struct sahara_ctx { - unsigned long flags; - /* AES-specific context */ int keylen; u8 key[AES_KEYSIZE_128]; @@ -447,26 +444,22 @@ static int sahara_hw_descriptor_create(struct sahara_dev *dev) int i, j; int idx = 0; - /* Copy new key if necessary */ - if (ctx->flags & FLAGS_NEW_KEY) { - memcpy(dev->key_base, ctx->key, ctx->keylen); - ctx->flags &= ~FLAGS_NEW_KEY; + memcpy(dev->key_base, ctx->key, ctx->keylen); - if (dev->flags & FLAGS_CBC) { - dev->hw_desc[idx]->len1 = AES_BLOCK_SIZE; - dev->hw_desc[idx]->p1 = dev->iv_phys_base; - } else { - dev->hw_desc[idx]->len1 = 0; - dev->hw_desc[idx]->p1 = 0; - } - dev->hw_desc[idx]->len2 = ctx->keylen; - dev->hw_desc[idx]->p2 = dev->key_phys_base; - dev->hw_desc[idx]->next = dev->hw_phys_desc[1]; - - dev->hw_desc[idx]->hdr = sahara_aes_key_hdr(dev); - - idx++; + if (dev->flags & FLAGS_CBC) { + dev->hw_desc[idx]->len1 = AES_BLOCK_SIZE; + dev->hw_desc[idx]->p1 = dev->iv_phys_base; + } else { + dev->hw_desc[idx]->len1 = 0; + dev->hw_desc[idx]->p1 = 0; } + dev->hw_desc[idx]->len2 = ctx->keylen; + dev->hw_desc[idx]->p2 = dev->key_phys_base; + dev->hw_desc[idx]->next = dev->hw_phys_desc[1]; + dev->hw_desc[idx]->hdr = sahara_aes_key_hdr(dev); + + idx++; + dev->nb_in_sg = sg_nents_for_len(dev->in_sg, dev->total); if (dev->nb_in_sg < 0) { @@ -608,7 +601,6 @@ static int sahara_aes_setkey(struct crypto_skcipher *tfm, const u8 *key, /* SAHARA only supports 128bit keys */ if (keylen == AES_KEYSIZE_128) { memcpy(ctx->key, key, keylen); - ctx->flags |= FLAGS_NEW_KEY; return 0; } From 4f4786b8184556e15dbcf63bf21eb0bf7e9d31cb Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Fri, 1 Dec 2023 19:06:20 +0200 Subject: [PATCH 088/288] crypto: sahara - fix cbc selftest failure [ Upstream commit 9f10bc28c0fb676ae58aa3bfa358db8f5de124bb ] The kernel crypto API requires that all CBC implementations update the IV buffer to contain the last ciphertext block. This fixes the following cbc selftest error: alg: skcipher: sahara-cbc-aes encryption test failed (wrong output IV) on test vector 0, cfg="in-place (one sglist)" Fixes: 5de8875281e1 ("crypto: sahara - Add driver for SAHARA2 accelerator.") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 33 +++++++++++++++++++++++++++++++-- 1 file changed, 31 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index 0ae95767bb76..0b6e63a763ca 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -148,6 +148,7 @@ struct sahara_ctx { struct sahara_aes_reqctx { unsigned long mode; + u8 iv_out[AES_BLOCK_SIZE]; struct skcipher_request fallback_req; // keep at the end }; @@ -541,8 +542,24 @@ static int sahara_hw_descriptor_create(struct sahara_dev *dev) return -EINVAL; } +static void sahara_aes_cbc_update_iv(struct skcipher_request *req) +{ + struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req); + struct sahara_aes_reqctx *rctx = skcipher_request_ctx(req); + unsigned int ivsize = crypto_skcipher_ivsize(skcipher); + + /* Update IV buffer to contain the last ciphertext block */ + if (rctx->mode & FLAGS_ENCRYPT) { + sg_pcopy_to_buffer(req->dst, sg_nents(req->dst), req->iv, + ivsize, req->cryptlen - ivsize); + } else { + memcpy(req->iv, rctx->iv_out, ivsize); + } +} + static int sahara_aes_process(struct skcipher_request *req) { + struct crypto_skcipher *skcipher = crypto_skcipher_reqtfm(req); struct sahara_dev *dev = dev_ptr; struct sahara_ctx *ctx; struct sahara_aes_reqctx *rctx; @@ -564,8 +581,17 @@ static int sahara_aes_process(struct skcipher_request *req) rctx->mode &= FLAGS_MODE_MASK; dev->flags = (dev->flags & ~FLAGS_MODE_MASK) | rctx->mode; - if ((dev->flags & FLAGS_CBC) && req->iv) - memcpy(dev->iv_base, req->iv, AES_KEYSIZE_128); + if ((dev->flags & FLAGS_CBC) && req->iv) { + unsigned int ivsize = crypto_skcipher_ivsize(skcipher); + + memcpy(dev->iv_base, req->iv, ivsize); + + if (!(dev->flags & FLAGS_ENCRYPT)) { + sg_pcopy_to_buffer(req->src, sg_nents(req->src), + rctx->iv_out, ivsize, + req->cryptlen - ivsize); + } + } /* assign new context to device */ dev->ctx = ctx; @@ -588,6 +614,9 @@ static int sahara_aes_process(struct skcipher_request *req) dma_unmap_sg(dev->device, dev->in_sg, dev->nb_in_sg, DMA_TO_DEVICE); + if ((dev->flags & FLAGS_CBC) && req->iv) + sahara_aes_cbc_update_iv(req); + return 0; } From fc91d32c7ded3be91971fd8c4346ddd3da39b1b2 Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Fri, 1 Dec 2023 19:06:21 +0200 Subject: [PATCH 089/288] crypto: sahara - fix ahash selftest failure [ Upstream commit afffcf3db98b9495114b79d5381f8cc3f69476fb ] update() calls should not modify the result buffer, so add an additional check for "rctx->last" to make sure that only the final hash value is copied into the buffer. Fixes the following selftest failure: alg: ahash: sahara-sha256 update() used result buffer on test vector 3, cfg="init+update+final aligned buffer" Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index 0b6e63a763ca..2ef177680b2f 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -1047,7 +1047,7 @@ static int sahara_sha_process(struct ahash_request *req) memcpy(rctx->context, dev->context_base, rctx->context_size); - if (req->result) + if (req->result && rctx->last) memcpy(req->result, rctx->context, rctx->digest_size); return 0; From 25b7ca747b0cdf728adf423b99f3e149de5756b2 Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Fri, 1 Dec 2023 19:06:22 +0200 Subject: [PATCH 090/288] crypto: sahara - fix processing requests with cryptlen < sg->length [ Upstream commit 5b8668ce3452827d27f8c34ff6ba080a8f983ed0 ] It's not always the case that the entire sg entry needs to be processed. Currently, when cryptlen is less than sg->legth, "Descriptor length" errors are encountered. The error was noticed when testing xts(sahara-ecb-aes) with arbitrary sized input data. To fix this, take the actual request size into account when populating the hw links. Fixes: 5de8875281e1 ("crypto: sahara - Add driver for SAHARA2 accelerator.") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index 2ef177680b2f..855c232d66a2 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -444,6 +444,7 @@ static int sahara_hw_descriptor_create(struct sahara_dev *dev) int ret; int i, j; int idx = 0; + u32 len; memcpy(dev->key_base, ctx->key, ctx->keylen); @@ -494,12 +495,14 @@ static int sahara_hw_descriptor_create(struct sahara_dev *dev) /* Create input links */ dev->hw_desc[idx]->p1 = dev->hw_phys_link[0]; sg = dev->in_sg; + len = dev->total; for (i = 0; i < dev->nb_in_sg; i++) { - dev->hw_link[i]->len = sg->length; + dev->hw_link[i]->len = min(len, sg->length); dev->hw_link[i]->p = sg->dma_address; if (i == (dev->nb_in_sg - 1)) { dev->hw_link[i]->next = 0; } else { + len -= min(len, sg->length); dev->hw_link[i]->next = dev->hw_phys_link[i + 1]; sg = sg_next(sg); } @@ -508,12 +511,14 @@ static int sahara_hw_descriptor_create(struct sahara_dev *dev) /* Create output links */ dev->hw_desc[idx]->p2 = dev->hw_phys_link[i]; sg = dev->out_sg; + len = dev->total; for (j = i; j < dev->nb_out_sg + i; j++) { - dev->hw_link[j]->len = sg->length; + dev->hw_link[j]->len = min(len, sg->length); dev->hw_link[j]->p = sg->dma_address; if (j == (dev->nb_out_sg + i - 1)) { dev->hw_link[j]->next = 0; } else { + len -= min(len, sg->length); dev->hw_link[j]->next = dev->hw_phys_link[j + 1]; sg = sg_next(sg); } From c60fd7a663661c2b20fb7151ebb64aada2688deb Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Fri, 1 Dec 2023 19:06:23 +0200 Subject: [PATCH 091/288] crypto: sahara - fix error handling in sahara_hw_descriptor_create() [ Upstream commit ee6e6f0a7f5b39d50a5ef5fcc006f4f693db18a7 ] Do not call dma_unmap_sg() for scatterlists that were not mapped successfully. Fixes: 5de8875281e1 ("crypto: sahara - Add driver for SAHARA2 accelerator.") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 8 +++----- 1 file changed, 3 insertions(+), 5 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index 855c232d66a2..3cd872d282b4 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -483,13 +483,14 @@ static int sahara_hw_descriptor_create(struct sahara_dev *dev) DMA_TO_DEVICE); if (ret != dev->nb_in_sg) { dev_err(dev->device, "couldn't map in sg\n"); - goto unmap_in; + return -EINVAL; } + ret = dma_map_sg(dev->device, dev->out_sg, dev->nb_out_sg, DMA_FROM_DEVICE); if (ret != dev->nb_out_sg) { dev_err(dev->device, "couldn't map out sg\n"); - goto unmap_out; + goto unmap_in; } /* Create input links */ @@ -537,9 +538,6 @@ static int sahara_hw_descriptor_create(struct sahara_dev *dev) return 0; -unmap_out: - dma_unmap_sg(dev->device, dev->out_sg, dev->nb_out_sg, - DMA_FROM_DEVICE); unmap_in: dma_unmap_sg(dev->device, dev->in_sg, dev->nb_in_sg, DMA_TO_DEVICE); From acd413da3e1f37582207cd6078a41d57c9011918 Mon Sep 17 00:00:00 2001 From: Sergey Shtylyov Date: Sun, 5 Nov 2023 23:29:36 +0300 Subject: [PATCH 092/288] pstore: ram_core: fix possible overflow in persistent_ram_init_ecc() [ Upstream commit 86222a8fc16ec517de8da2604d904c9df3a08e5d ] In persistent_ram_init_ecc(), on 64-bit arches DIV_ROUND_UP() will return 64-bit value since persistent_ram_zone::buffer_size has type size_t which is derived from the 64-bit *unsigned long*, while the ecc_blocks variable this value gets assigned to has (always 32-bit) *int* type. Even if that value fits into *int* type, an overflow is still possible when calculating the size_t typed ecc_total variable further below since there's no cast to any 64-bit type before multiplication. Declaring the ecc_blocks variable as *size_t* should fix this mess... Found by Linux Verification Center (linuxtesting.org) with the SVACE static analysis tool. Fixes: 9cc05ad97c57 ("staging: android: persistent_ram: refactor ecc support") Signed-off-by: Sergey Shtylyov Link: https://lore.kernel.org/r/20231105202936.25694-1-s.shtylyov@omp.ru Signed-off-by: Kees Cook Signed-off-by: Sasha Levin --- fs/pstore/ram_core.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/pstore/ram_core.c b/fs/pstore/ram_core.c index a0fa3820ef2a..5ac9b1f155a8 100644 --- a/fs/pstore/ram_core.c +++ b/fs/pstore/ram_core.c @@ -190,7 +190,7 @@ static int persistent_ram_init_ecc(struct persistent_ram_zone *prz, { int numerr; struct persistent_ram_buffer *buffer = prz->buffer; - int ecc_blocks; + size_t ecc_blocks; size_t ecc_total; if (!ecc_info || !ecc_info->ecc_size) From cd48d2a8e6bafd5549d7bb482cd548881bd1ff38 Mon Sep 17 00:00:00 2001 From: Christian Brauner Date: Wed, 22 Nov 2023 12:17:37 -0500 Subject: [PATCH 093/288] fs: indicate request originates from old mount API [ Upstream commit f67d922edb4e95a4a56d07d5d40a76dd4f23a85b ] We already communicate to filesystems when a remount request comes from the old mount API as some filesystems choose to implement different behavior in the new mount API than the old mount API to e.g., take the chance to fix significant API bugs. Allow the same for regular mount requests. Fixes: b330966f79fb ("fuse: reject options on reconfigure via fsconfig(2)") Reviewed-by: Christoph Hellwig Reviewed-by: Johannes Thumshirn Reviewed-by: Anand Jain Signed-off-by: Christian Brauner Signed-off-by: Josef Bacik Reviewed-by: David Sterba Signed-off-by: David Sterba Signed-off-by: Sasha Levin --- fs/namespace.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/fs/namespace.c b/fs/namespace.c index 046b084136c5..b020a12c53a2 100644 --- a/fs/namespace.c +++ b/fs/namespace.c @@ -2627,7 +2627,12 @@ static int do_remount(struct path *path, int ms_flags, int sb_flags, if (IS_ERR(fc)) return PTR_ERR(fc); + /* + * Indicate to the filesystem that the remount request is coming + * from the legacy mount system call. + */ fc->oldapi = true; + err = parse_monolithic_mount_data(fc, data); if (!err) { down_write(&sb->s_umount); @@ -2886,6 +2891,12 @@ static int do_new_mount(struct path *path, const char *fstype, int sb_flags, if (IS_ERR(fc)) return PTR_ERR(fc); + /* + * Indicate to the filesystem that the mount request is coming + * from the legacy mount system call. + */ + fc->oldapi = true; + if (subtype) err = vfs_parse_fs_string(fc, "subtype", subtype, strlen(subtype)); From 22f63f9bc8516685d3b6c725f06baf3e31592ff6 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Tue, 6 Oct 2020 14:29:04 +0200 Subject: [PATCH 094/288] Revert "gfs2: Don't reject a supposedly full bitmap if we have blocks reserved" [ Upstream commit 2fdc2fa21bc72ec06c0c9f0e30b88fe1f2486b75 ] This reverts commit e79e0e1428188b24c3b57309ffa54a33c4ae40c4. It turns out that we're only setting the GBF_FULL flag of a bitmap if we've been scanning from the beginning of the bitmap until the end and we haven't found a single free block, and we're not skipping reservations in that process, either. This means that in gfs2_rbm_find, we can always skip bitmaps with the GBF_FULL flag set. Signed-off-by: Andreas Gruenbacher Stable-dep-of: 8877243beafa ("gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump") Signed-off-by: Sasha Levin --- fs/gfs2/rgrp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index c5bde789a16d..e05c01d5b9e6 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1717,8 +1717,7 @@ static int gfs2_rbm_find(struct gfs2_rbm *rbm, u8 state, u32 *minext, while(1) { bi = rbm_bi(rbm); - if ((ip == NULL || !gfs2_rs_active(&ip->i_res)) && - test_bit(GBF_FULL, &bi->bi_flags) && + if (test_bit(GBF_FULL, &bi->bi_flags) && (state == GFS2_BLKST_FREE)) goto next_bitmap; From 57c7b331f0e51f8eec74848f52a31d29869a8a86 Mon Sep 17 00:00:00 2001 From: Andreas Gruenbacher Date: Mon, 5 Oct 2020 19:39:18 +0200 Subject: [PATCH 095/288] gfs2: Also reflect single-block allocations in rgd->rd_extfail_pt [ Upstream commit f38e998fbbb5da6a097ecd4b2700ba95eabab0c9 ] Pass a non-NULL minext to gfs2_rbm_find even for single-block allocations. In gfs2_rbm_find, also set rgd->rd_extfail_pt when a single-block allocation fails in a resource group: there is no reason for treating that case differently. In gfs2_reservation_check_and_update, only check how many free blocks we have if more than one block is requested; we already know there's at least one free block. In addition, when allocating N blocks fails in gfs2_rbm_find, we need to set rd_extfail_pt to N - 1 rather than N: rd_extfail_pt defines the biggest allocation that might still succeed. Finally, reset rd_extfail_pt when updating the resource group statistics in update_rgrp_lvb, as we already do in gfs2_rgrp_bh_get. Signed-off-by: Andreas Gruenbacher Stable-dep-of: 8877243beafa ("gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump") Signed-off-by: Sasha Levin --- fs/gfs2/rgrp.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index e05c01d5b9e6..ac0715aafa8e 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -1247,6 +1247,8 @@ static int update_rgrp_lvb(struct gfs2_rgrpd *rgd) rgd->rd_flags &= ~GFS2_RDF_CHECK; rgd->rd_free = be32_to_cpu(rgd->rd_rgl->rl_free); rgd->rd_free_clone = rgd->rd_free; + /* max out the rgrp allocation failure point */ + rgd->rd_extfail_pt = rgd->rd_free; rgd->rd_dinodes = be32_to_cpu(rgd->rd_rgl->rl_dinodes); rgd->rd_igeneration = be64_to_cpu(rgd->rd_rgl->rl_igeneration); return 0; @@ -1648,7 +1650,7 @@ static int gfs2_reservation_check_and_update(struct gfs2_rbm *rbm, * If we have a minimum extent length, then skip over any extent * which is less than the min extent length in size. */ - if (minext) { + if (minext > 1) { extlen = gfs2_free_extlen(rbm, minext); if (extlen <= maxext->len) goto fail; @@ -1680,7 +1682,7 @@ static int gfs2_reservation_check_and_update(struct gfs2_rbm *rbm, * gfs2_rbm_find - Look for blocks of a particular state * @rbm: Value/result starting position and final position * @state: The state which we want to find - * @minext: Pointer to the requested extent length (NULL for a single block) + * @minext: Pointer to the requested extent length * This is updated to be the actual reservation size. * @ip: If set, check for reservations * @nowrap: Stop looking at the end of the rgrp, rather than wrapping @@ -1736,8 +1738,7 @@ static int gfs2_rbm_find(struct gfs2_rbm *rbm, u8 state, u32 *minext, if (ip == NULL) return 0; - ret = gfs2_reservation_check_and_update(rbm, ip, - minext ? *minext : 0, + ret = gfs2_reservation_check_and_update(rbm, ip, *minext, &maxext); if (ret == 0) return 0; @@ -1769,7 +1770,7 @@ static int gfs2_rbm_find(struct gfs2_rbm *rbm, u8 state, u32 *minext, break; } - if (minext == NULL || state != GFS2_BLKST_FREE) + if (state != GFS2_BLKST_FREE) return -ENOSPC; /* If the extent was too small, and it's smaller than the smallest @@ -1777,7 +1778,7 @@ static int gfs2_rbm_find(struct gfs2_rbm *rbm, u8 state, u32 *minext, useless to search this rgrp again for this amount or more. */ if (wrapped && (scan_from_start || rbm->bii > last_bii) && *minext < rbm->rgd->rd_extfail_pt) - rbm->rgd->rd_extfail_pt = *minext; + rbm->rgd->rd_extfail_pt = *minext - 1; /* If the maximum extent we found is big enough to fulfill the minimum requirements, use it anyway. */ @@ -2351,14 +2352,15 @@ int gfs2_alloc_blocks(struct gfs2_inode *ip, u64 *bn, unsigned int *nblocks, struct gfs2_rbm rbm = { .rgd = ip->i_res.rs_rbm.rgd, }; unsigned int ndata; u64 block; /* block, within the file system scope */ + u32 minext = 1; int error; gfs2_set_alloc_start(&rbm, ip, dinode); - error = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, NULL, ip, false); + error = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, &minext, ip, false); if (error == -ENOSPC) { gfs2_set_alloc_start(&rbm, ip, dinode); - error = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, NULL, NULL, false); + error = gfs2_rbm_find(&rbm, GFS2_BLKST_FREE, &minext, NULL, false); } /* Since all blocks are reserved in advance, this shouldn't happen */ From 5c28478af371a1c3fdb570ca67f110e1ae60fc37 Mon Sep 17 00:00:00 2001 From: Osama Muhammad Date: Mon, 6 Nov 2023 21:21:29 +0500 Subject: [PATCH 096/288] gfs2: Fix kernel NULL pointer dereference in gfs2_rgrp_dump [ Upstream commit 8877243beafa7c6bfc42022cbfdf9e39b25bd4fa ] Syzkaller has reported a NULL pointer dereference when accessing rgd->rd_rgl in gfs2_rgrp_dump(). This can happen when creating rgd->rd_gl fails in read_rindex_entry(). Add a NULL pointer check in gfs2_rgrp_dump() to prevent that. Reported-and-tested-by: syzbot+da0fc229cc1ff4bb2e6d@syzkaller.appspotmail.com Link: https://syzkaller.appspot.com/bug?extid=da0fc229cc1ff4bb2e6d Fixes: 72244b6bc752 ("gfs2: improve debug information when lvb mismatches are found") Signed-off-by: Osama Muhammad Signed-off-by: Andreas Gruenbacher Signed-off-by: Sasha Levin --- fs/gfs2/rgrp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/gfs2/rgrp.c b/fs/gfs2/rgrp.c index ac0715aafa8e..1ffdc4ad6246 100644 --- a/fs/gfs2/rgrp.c +++ b/fs/gfs2/rgrp.c @@ -2231,7 +2231,7 @@ void gfs2_rgrp_dump(struct seq_file *seq, struct gfs2_rgrpd *rgd, (unsigned long long)rgd->rd_addr, rgd->rd_flags, rgd->rd_free, rgd->rd_free_clone, rgd->rd_dinodes, rgd->rd_reserved, rgd->rd_extfail_pt); - if (rgd->rd_sbd->sd_args.ar_rgrplvb) { + if (rgd->rd_sbd->sd_args.ar_rgrplvb && rgd->rd_rgl) { struct gfs2_rgrp_lvb *rgl = rgd->rd_rgl; gfs2_print_dbg(seq, "%s L: f:%02x b:%u i:%u\n", fs_id_buf, From 14f57a013a9520800a70ecc6e4e2782f522458b4 Mon Sep 17 00:00:00 2001 From: wangyangxin Date: Mon, 11 Dec 2023 19:42:15 +0800 Subject: [PATCH 097/288] crypto: virtio - Wait for tasklet to complete on device remove [ Upstream commit 67cc511e8d436456cc98033e6d4ba83ebfc8e672 ] The scheduled tasklet needs to be executed on device remove. Fixes: fed93fb62e05 ("crypto: virtio - Handle dataq logic with tasklet") Signed-off-by: wangyangxin Signed-off-by: Gonglei Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/virtio/virtio_crypto_core.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/crypto/virtio/virtio_crypto_core.c b/drivers/crypto/virtio/virtio_crypto_core.c index 630af33929ef..3da956145892 100644 --- a/drivers/crypto/virtio/virtio_crypto_core.c +++ b/drivers/crypto/virtio/virtio_crypto_core.c @@ -488,11 +488,14 @@ static void virtcrypto_free_unused_reqs(struct virtio_crypto *vcrypto) static void virtcrypto_remove(struct virtio_device *vdev) { struct virtio_crypto *vcrypto = vdev->priv; + int i; dev_info(&vdev->dev, "Start virtcrypto_remove.\n"); if (virtcrypto_dev_started(vcrypto)) virtcrypto_dev_stop(vcrypto); + for (i = 0; i < vcrypto->max_data_queues; i++) + tasklet_kill(&vcrypto->data_vq[i].done_task); vdev->config->reset(vdev); virtcrypto_free_unused_reqs(vcrypto); virtcrypto_clear_crypto_engines(vcrypto); From b839648d05855b3b07a7c2385a5324bed0ce9c34 Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Fri, 1 Dec 2023 19:06:25 +0200 Subject: [PATCH 098/288] crypto: sahara - avoid skcipher fallback code duplication [ Upstream commit 01d70a4bbff20ea05cadb4c208841985a7cc6596 ] Factor out duplicated skcipher fallback handling code to a helper function sahara_aes_fallback(). Also, keep a single check if fallback is required in sahara_aes_crypt(). Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Stable-dep-of: d1d6351e37aa ("crypto: sahara - handle zero-length aes requests") Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 85 ++++++++++++----------------------------- 1 file changed, 25 insertions(+), 60 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index 3cd872d282b4..b584dd086989 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -648,12 +648,37 @@ static int sahara_aes_setkey(struct crypto_skcipher *tfm, const u8 *key, return crypto_skcipher_setkey(ctx->fallback, key, keylen); } +static int sahara_aes_fallback(struct skcipher_request *req, unsigned long mode) +{ + struct sahara_aes_reqctx *rctx = skcipher_request_ctx(req); + struct sahara_ctx *ctx = crypto_skcipher_ctx( + crypto_skcipher_reqtfm(req)); + + skcipher_request_set_tfm(&rctx->fallback_req, ctx->fallback); + skcipher_request_set_callback(&rctx->fallback_req, + req->base.flags, + req->base.complete, + req->base.data); + skcipher_request_set_crypt(&rctx->fallback_req, req->src, + req->dst, req->cryptlen, req->iv); + + if (mode & FLAGS_ENCRYPT) + return crypto_skcipher_encrypt(&rctx->fallback_req); + + return crypto_skcipher_decrypt(&rctx->fallback_req); +} + static int sahara_aes_crypt(struct skcipher_request *req, unsigned long mode) { struct sahara_aes_reqctx *rctx = skcipher_request_ctx(req); + struct sahara_ctx *ctx = crypto_skcipher_ctx( + crypto_skcipher_reqtfm(req)); struct sahara_dev *dev = dev_ptr; int err = 0; + if (unlikely(ctx->keylen != AES_KEYSIZE_128)) + return sahara_aes_fallback(req, mode); + dev_dbg(dev->device, "nbytes: %d, enc: %d, cbc: %d\n", req->cryptlen, !!(mode & FLAGS_ENCRYPT), !!(mode & FLAGS_CBC)); @@ -676,81 +701,21 @@ static int sahara_aes_crypt(struct skcipher_request *req, unsigned long mode) static int sahara_aes_ecb_encrypt(struct skcipher_request *req) { - struct sahara_aes_reqctx *rctx = skcipher_request_ctx(req); - struct sahara_ctx *ctx = crypto_skcipher_ctx( - crypto_skcipher_reqtfm(req)); - - if (unlikely(ctx->keylen != AES_KEYSIZE_128)) { - skcipher_request_set_tfm(&rctx->fallback_req, ctx->fallback); - skcipher_request_set_callback(&rctx->fallback_req, - req->base.flags, - req->base.complete, - req->base.data); - skcipher_request_set_crypt(&rctx->fallback_req, req->src, - req->dst, req->cryptlen, req->iv); - return crypto_skcipher_encrypt(&rctx->fallback_req); - } - return sahara_aes_crypt(req, FLAGS_ENCRYPT); } static int sahara_aes_ecb_decrypt(struct skcipher_request *req) { - struct sahara_aes_reqctx *rctx = skcipher_request_ctx(req); - struct sahara_ctx *ctx = crypto_skcipher_ctx( - crypto_skcipher_reqtfm(req)); - - if (unlikely(ctx->keylen != AES_KEYSIZE_128)) { - skcipher_request_set_tfm(&rctx->fallback_req, ctx->fallback); - skcipher_request_set_callback(&rctx->fallback_req, - req->base.flags, - req->base.complete, - req->base.data); - skcipher_request_set_crypt(&rctx->fallback_req, req->src, - req->dst, req->cryptlen, req->iv); - return crypto_skcipher_decrypt(&rctx->fallback_req); - } - return sahara_aes_crypt(req, 0); } static int sahara_aes_cbc_encrypt(struct skcipher_request *req) { - struct sahara_aes_reqctx *rctx = skcipher_request_ctx(req); - struct sahara_ctx *ctx = crypto_skcipher_ctx( - crypto_skcipher_reqtfm(req)); - - if (unlikely(ctx->keylen != AES_KEYSIZE_128)) { - skcipher_request_set_tfm(&rctx->fallback_req, ctx->fallback); - skcipher_request_set_callback(&rctx->fallback_req, - req->base.flags, - req->base.complete, - req->base.data); - skcipher_request_set_crypt(&rctx->fallback_req, req->src, - req->dst, req->cryptlen, req->iv); - return crypto_skcipher_encrypt(&rctx->fallback_req); - } - return sahara_aes_crypt(req, FLAGS_ENCRYPT | FLAGS_CBC); } static int sahara_aes_cbc_decrypt(struct skcipher_request *req) { - struct sahara_aes_reqctx *rctx = skcipher_request_ctx(req); - struct sahara_ctx *ctx = crypto_skcipher_ctx( - crypto_skcipher_reqtfm(req)); - - if (unlikely(ctx->keylen != AES_KEYSIZE_128)) { - skcipher_request_set_tfm(&rctx->fallback_req, ctx->fallback); - skcipher_request_set_callback(&rctx->fallback_req, - req->base.flags, - req->base.complete, - req->base.data); - skcipher_request_set_crypt(&rctx->fallback_req, req->src, - req->dst, req->cryptlen, req->iv); - return crypto_skcipher_decrypt(&rctx->fallback_req); - } - return sahara_aes_crypt(req, FLAGS_CBC); } From d8d9580831ea87c0ade57c73222b7ad9cd6633e2 Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Sun, 24 Dec 2023 10:21:31 +0200 Subject: [PATCH 099/288] crypto: sahara - handle zero-length aes requests [ Upstream commit d1d6351e37aac14b32a291731d0855996c459d11 ] In case of a zero-length input, exit gracefully from sahara_aes_crypt(). Fixes: 5de8875281e1 ("crypto: sahara - Add driver for SAHARA2 accelerator.") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index b584dd086989..d6510e169c8e 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -676,6 +676,9 @@ static int sahara_aes_crypt(struct skcipher_request *req, unsigned long mode) struct sahara_dev *dev = dev_ptr; int err = 0; + if (!req->cryptlen) + return 0; + if (unlikely(ctx->keylen != AES_KEYSIZE_128)) return sahara_aes_fallback(req, mode); From 69451bf97c83214a353d9398acdb33bc5d05749d Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Sun, 24 Dec 2023 10:21:32 +0200 Subject: [PATCH 100/288] crypto: sahara - fix ahash reqsize [ Upstream commit efcb50f41740ac55e6ccc4986c1a7740e21c62b4 ] Set the reqsize for sha algorithms to sizeof(struct sahara_sha_reqctx), the extra space is not needed. Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index d6510e169c8e..a97b1dadf6a4 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -1162,8 +1162,7 @@ static int sahara_sha_import(struct ahash_request *req, const void *in) static int sahara_sha_cra_init(struct crypto_tfm *tfm) { crypto_ahash_set_reqsize(__crypto_ahash_cast(tfm), - sizeof(struct sahara_sha_reqctx) + - SHA_BUFFER_LEN + SHA256_BLOCK_SIZE); + sizeof(struct sahara_sha_reqctx)); return 0; } From 98985edab61f01a7be34046fa001b1f18168a50d Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Sun, 24 Dec 2023 10:21:33 +0200 Subject: [PATCH 101/288] crypto: sahara - fix wait_for_completion_timeout() error handling [ Upstream commit 2dba8e1d1a7957dcbe7888846268538847b471d1 ] The sg lists are not unmapped in case of timeout errors. Fix this. Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Fixes: 5de8875281e1 ("crypto: sahara - Add driver for SAHARA2 accelerator.") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 18 ++++++++++-------- 1 file changed, 10 insertions(+), 8 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index a97b1dadf6a4..67960acd786a 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -607,16 +607,17 @@ static int sahara_aes_process(struct skcipher_request *req) timeout = wait_for_completion_timeout(&dev->dma_completion, msecs_to_jiffies(SAHARA_TIMEOUT_MS)); - if (!timeout) { - dev_err(dev->device, "AES timeout\n"); - return -ETIMEDOUT; - } dma_unmap_sg(dev->device, dev->out_sg, dev->nb_out_sg, DMA_FROM_DEVICE); dma_unmap_sg(dev->device, dev->in_sg, dev->nb_in_sg, DMA_TO_DEVICE); + if (!timeout) { + dev_err(dev->device, "AES timeout\n"); + return -ETIMEDOUT; + } + if ((dev->flags & FLAGS_CBC) && req->iv) sahara_aes_cbc_update_iv(req); @@ -1007,15 +1008,16 @@ static int sahara_sha_process(struct ahash_request *req) timeout = wait_for_completion_timeout(&dev->dma_completion, msecs_to_jiffies(SAHARA_TIMEOUT_MS)); - if (!timeout) { - dev_err(dev->device, "SHA timeout\n"); - return -ETIMEDOUT; - } if (rctx->sg_in_idx) dma_unmap_sg(dev->device, dev->in_sg, dev->nb_in_sg, DMA_TO_DEVICE); + if (!timeout) { + dev_err(dev->device, "SHA timeout\n"); + return -ETIMEDOUT; + } + memcpy(rctx->context, dev->context_base, rctx->context_size); if (req->result && rctx->last) From b3287c8a7eab707245d7c344f5c36db944f1e056 Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Sun, 24 Dec 2023 10:21:34 +0200 Subject: [PATCH 102/288] crypto: sahara - improve error handling in sahara_sha_process() [ Upstream commit 5deff027fca49a1eb3b20359333cf2ae562a2343 ] sahara_sha_hw_data_descriptor_create() returns negative error codes on failure, so make sure the errors are correctly handled / propagated. Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index 67960acd786a..0ac793f03e28 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -987,7 +987,10 @@ static int sahara_sha_process(struct ahash_request *req) return ret; if (rctx->first) { - sahara_sha_hw_data_descriptor_create(dev, rctx, req, 0); + ret = sahara_sha_hw_data_descriptor_create(dev, rctx, req, 0); + if (ret) + return ret; + dev->hw_desc[0]->next = 0; rctx->first = 0; } else { @@ -995,7 +998,10 @@ static int sahara_sha_process(struct ahash_request *req) sahara_sha_hw_context_descriptor_create(dev, rctx, req, 0); dev->hw_desc[0]->next = dev->hw_phys_desc[1]; - sahara_sha_hw_data_descriptor_create(dev, rctx, req, 1); + ret = sahara_sha_hw_data_descriptor_create(dev, rctx, req, 1); + if (ret) + return ret; + dev->hw_desc[1]->next = 0; } From 67ae336f3b83d915414db94f0d6bda7fd23b811a Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Sun, 24 Dec 2023 10:21:35 +0200 Subject: [PATCH 103/288] crypto: sahara - fix processing hash requests with req->nbytes < sg->length [ Upstream commit 7bafa74d1ba35dcc173e1ce915e983d65905f77e ] It's not always the case that the entire sg entry needs to be processed. Currently, when nbytes is less than sg->length, "Descriptor length" errors are encountered. To fix this, take the actual request size into account when populating the hw links. Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index 0ac793f03e28..cdf16e2a81d1 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -776,6 +776,7 @@ static int sahara_sha_hw_links_create(struct sahara_dev *dev, int start) { struct scatterlist *sg; + unsigned int len; unsigned int i; int ret; @@ -797,12 +798,14 @@ static int sahara_sha_hw_links_create(struct sahara_dev *dev, if (!ret) return -EFAULT; + len = rctx->total; for (i = start; i < dev->nb_in_sg + start; i++) { - dev->hw_link[i]->len = sg->length; + dev->hw_link[i]->len = min(len, sg->length); dev->hw_link[i]->p = sg->dma_address; if (i == (dev->nb_in_sg + start - 1)) { dev->hw_link[i]->next = 0; } else { + len -= min(len, sg->length); dev->hw_link[i]->next = dev->hw_phys_link[i + 1]; sg = sg_next(sg); } From 1798c8fd0093fc4170be88d031b742b90d0b7742 Mon Sep 17 00:00:00 2001 From: Ovidiu Panait Date: Sun, 24 Dec 2023 10:21:36 +0200 Subject: [PATCH 104/288] crypto: sahara - do not resize req->src when doing hash operations [ Upstream commit a3c6f4f4d249cecaf2f34471aadbfb4f4ef57298 ] When testing sahara sha256 speed performance with tcrypt (mode=404) on imx53-qsrb board, multiple "Invalid numbers of src SG." errors are reported. This was traced to sahara_walk_and_recalc() resizing req->src and causing the subsequent dma_map_sg() call to fail. Now that the previous commit fixed sahara_sha_hw_links_create() to take into account the actual request size, rather than relying on sg->length values, the resize operation is no longer necessary. Therefore, remove sahara_walk_and_recalc() and simplify associated logic. Fixes: 5a2bb93f5992 ("crypto: sahara - add support for SHA1/256") Signed-off-by: Ovidiu Panait Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- drivers/crypto/sahara.c | 38 ++------------------------------------ 1 file changed, 2 insertions(+), 36 deletions(-) diff --git a/drivers/crypto/sahara.c b/drivers/crypto/sahara.c index cdf16e2a81d1..c2a3a10c3484 100644 --- a/drivers/crypto/sahara.c +++ b/drivers/crypto/sahara.c @@ -886,24 +886,6 @@ static int sahara_sha_hw_context_descriptor_create(struct sahara_dev *dev, return 0; } -static int sahara_walk_and_recalc(struct scatterlist *sg, unsigned int nbytes) -{ - if (!sg || !sg->length) - return nbytes; - - while (nbytes && sg) { - if (nbytes <= sg->length) { - sg->length = nbytes; - sg_mark_end(sg); - break; - } - nbytes -= sg->length; - sg = sg_next(sg); - } - - return nbytes; -} - static int sahara_sha_prepare_request(struct ahash_request *req) { struct crypto_ahash *tfm = crypto_ahash_reqtfm(req); @@ -940,36 +922,20 @@ static int sahara_sha_prepare_request(struct ahash_request *req) hash_later, 0); } - /* nbytes should now be multiple of blocksize */ - req->nbytes = req->nbytes - hash_later; - - sahara_walk_and_recalc(req->src, req->nbytes); - + rctx->total = len - hash_later; /* have data from previous operation and current */ if (rctx->buf_cnt && req->nbytes) { sg_init_table(rctx->in_sg_chain, 2); sg_set_buf(rctx->in_sg_chain, rctx->rembuf, rctx->buf_cnt); - sg_chain(rctx->in_sg_chain, 2, req->src); - - rctx->total = req->nbytes + rctx->buf_cnt; rctx->in_sg = rctx->in_sg_chain; - - req->src = rctx->in_sg_chain; /* only data from previous operation */ } else if (rctx->buf_cnt) { - if (req->src) - rctx->in_sg = req->src; - else - rctx->in_sg = rctx->in_sg_chain; - /* buf was copied into rembuf above */ + rctx->in_sg = rctx->in_sg_chain; sg_init_one(rctx->in_sg, rctx->rembuf, rctx->buf_cnt); - rctx->total = rctx->buf_cnt; /* no data from previous operation */ } else { rctx->in_sg = req->src; - rctx->total = req->nbytes; - req->src = rctx->in_sg; } /* on next call, we only have the remaining data in the buffer */ From 4518dc468cdd796757190515a9be7408adc8911e Mon Sep 17 00:00:00 2001 From: Chengming Zhou Date: Wed, 27 Dec 2023 09:35:23 +0000 Subject: [PATCH 105/288] crypto: scomp - fix req->dst buffer overflow [ Upstream commit 744e1885922a9943458954cfea917b31064b4131 ] The req->dst buffer size should be checked before copying from the scomp_scratch->dst to avoid req->dst buffer overflow problem. Fixes: 1ab53a77b772 ("crypto: acomp - add driver-side scomp interface") Reported-by: syzbot+3eff5e51bf1db122a16e@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/0000000000000b05cd060d6b5511@google.com/ Signed-off-by: Chengming Zhou Reviewed-by: Barry Song Signed-off-by: Herbert Xu Signed-off-by: Sasha Levin --- crypto/scompress.c | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/crypto/scompress.c b/crypto/scompress.c index 738f4f8f0f41..4d6366a44400 100644 --- a/crypto/scompress.c +++ b/crypto/scompress.c @@ -124,6 +124,7 @@ static int scomp_acomp_comp_decomp(struct acomp_req *req, int dir) struct crypto_scomp *scomp = *tfm_ctx; void **ctx = acomp_request_ctx(req); struct scomp_scratch *scratch; + unsigned int dlen; int ret; if (!req->src || !req->slen || req->slen > SCOMP_SCRATCH_SIZE) @@ -135,6 +136,8 @@ static int scomp_acomp_comp_decomp(struct acomp_req *req, int dir) if (!req->dlen || req->dlen > SCOMP_SCRATCH_SIZE) req->dlen = SCOMP_SCRATCH_SIZE; + dlen = req->dlen; + scratch = raw_cpu_ptr(&scomp_scratch); spin_lock(&scratch->lock); @@ -152,6 +155,9 @@ static int scomp_acomp_comp_decomp(struct acomp_req *req, int dir) ret = -ENOMEM; goto out; } + } else if (req->dlen > dlen) { + ret = -ENOSPC; + goto out; } scatterwalk_map_and_copy(scratch->dst, req->dst, 0, req->dlen, 1); From 722c700dd87a1e8ccba203796562035ea8652dc6 Mon Sep 17 00:00:00 2001 From: Benjamin Coddington Date: Tue, 5 Dec 2023 10:05:01 -0500 Subject: [PATCH 106/288] blocklayoutdriver: Fix reference leak of pnfs_device_node [ Upstream commit 1530827b90025cdf80c9b0d07a166d045a0a7b81 ] The error path for blocklayout's device lookup is missing a reference drop for the case where a lookup finds the device, but the device is marked with NFS_DEVICEID_UNAVAILABLE. Fixes: b3dce6a2f060 ("pnfs/blocklayout: handle transient devices") Signed-off-by: Benjamin Coddington Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin --- fs/nfs/blocklayout/blocklayout.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/fs/nfs/blocklayout/blocklayout.c b/fs/nfs/blocklayout/blocklayout.c index 08108b6d2fa1..73000aa2d220 100644 --- a/fs/nfs/blocklayout/blocklayout.c +++ b/fs/nfs/blocklayout/blocklayout.c @@ -604,6 +604,8 @@ bl_find_get_deviceid(struct nfs_server *server, nfs4_delete_deviceid(node->ld, node->nfs_client, id); goto retry; } + + nfs4_put_deviceid_node(node); return ERR_PTR(-ENODEV); } From d8caf15ab156504002407982d07ee322d1958db0 Mon Sep 17 00:00:00 2001 From: Trond Myklebust Date: Wed, 15 Nov 2023 13:55:29 -0500 Subject: [PATCH 107/288] NFSv4.1/pnfs: Ensure we handle the error NFS4ERR_RETURNCONFLICT [ Upstream commit 037e56a22ff37f9a9c2330b66cff55d3d1ff9b90 ] Once the client has processed the CB_LAYOUTRECALL, but has not yet successfully returned the layout, the server is supposed to switch to returning NFS4ERR_RETURNCONFLICT. This patch ensures that we handle that return value correctly. Fixes: 183d9e7b112a ("pnfs: rework LAYOUTGET retry handling") Signed-off-by: Trond Myklebust Signed-off-by: Anna Schumaker Signed-off-by: Sasha Levin --- fs/nfs/nfs4proc.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/fs/nfs/nfs4proc.c b/fs/nfs/nfs4proc.c index f3f41027f697..7c3c96ed6085 100644 --- a/fs/nfs/nfs4proc.c +++ b/fs/nfs/nfs4proc.c @@ -177,6 +177,7 @@ static int nfs4_map_errors(int err) case -NFS4ERR_RESOURCE: case -NFS4ERR_LAYOUTTRYLATER: case -NFS4ERR_RECALLCONFLICT: + case -NFS4ERR_RETURNCONFLICT: return -EREMOTEIO; case -NFS4ERR_WRONGSEC: case -NFS4ERR_WRONG_CRED: @@ -563,6 +564,7 @@ static int nfs4_do_handle_exception(struct nfs_server *server, case -NFS4ERR_GRACE: case -NFS4ERR_LAYOUTTRYLATER: case -NFS4ERR_RECALLCONFLICT: + case -NFS4ERR_RETURNCONFLICT: exception->delay = 1; return 0; @@ -9445,6 +9447,7 @@ nfs4_layoutget_handle_exception(struct rpc_task *task, status = -EBUSY; break; case -NFS4ERR_RECALLCONFLICT: + case -NFS4ERR_RETURNCONFLICT: status = -ERECALLCONFLICT; break; case -NFS4ERR_DELEG_REVOKED: From eb0eac5736462696a801ddcaf0b010595da515b3 Mon Sep 17 00:00:00 2001 From: Chih-Kang Chang Date: Fri, 3 Nov 2023 10:08:51 +0800 Subject: [PATCH 108/288] wifi: rtw88: fix RX filter in FIF_ALLMULTI flag [ Upstream commit 53ee0b3b99edc6a47096bffef15695f5a895386f ] The broadcast packets will be filtered in the FIF_ALLMULTI flag in the original code, which causes beacon packets to be filtered out and disconnection. Therefore, we fix it. Fixes: e3037485c68e ("rtw88: new Realtek 802.11ac driver") Signed-off-by: Chih-Kang Chang Signed-off-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231103020851.102238-1-pkshih@realtek.com Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtw88/mac80211.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtw88/mac80211.c b/drivers/net/wireless/realtek/rtw88/mac80211.c index c92fba2fa480..0a3766781347 100644 --- a/drivers/net/wireless/realtek/rtw88/mac80211.c +++ b/drivers/net/wireless/realtek/rtw88/mac80211.c @@ -264,9 +264,9 @@ static void rtw_ops_configure_filter(struct ieee80211_hw *hw, if (changed_flags & FIF_ALLMULTI) { if (*new_flags & FIF_ALLMULTI) - rtwdev->hal.rcr |= BIT_AM | BIT_AB; + rtwdev->hal.rcr |= BIT_AM; else - rtwdev->hal.rcr &= ~(BIT_AM | BIT_AB); + rtwdev->hal.rcr &= ~(BIT_AM); } if (changed_flags & FIF_FCSFAIL) { if (*new_flags & FIF_FCSFAIL) From d5d181df8d751e477981a45da910216493df2d80 Mon Sep 17 00:00:00 2001 From: Florian Lehner Date: Sun, 5 Nov 2023 09:58:01 +0100 Subject: [PATCH 109/288] bpf, lpm: Fix check prefixlen before walking trie [ Upstream commit 9b75dbeb36fcd9fc7ed51d370310d0518a387769 ] When looking up an element in LPM trie, the condition 'matchlen == trie->max_prefixlen' will never return true, if key->prefixlen is larger than trie->max_prefixlen. Consequently all elements in the LPM trie will be visited and no element is returned in the end. To resolve this, check key->prefixlen first before walking the LPM trie. Fixes: b95a5c4db09b ("bpf: add a longest prefix match trie map implementation") Signed-off-by: Florian Lehner Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20231105085801.3742-1-dev@der-flo.net Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin --- kernel/bpf/lpm_trie.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/kernel/bpf/lpm_trie.c b/kernel/bpf/lpm_trie.c index 00e32f2ec3e6..3c2d8722d45b 100644 --- a/kernel/bpf/lpm_trie.c +++ b/kernel/bpf/lpm_trie.c @@ -230,6 +230,9 @@ static void *trie_lookup_elem(struct bpf_map *map, void *_key) struct lpm_trie_node *node, *found = NULL; struct bpf_lpm_trie_key *key = _key; + if (key->prefixlen > trie->max_prefixlen) + return NULL; + /* Start walking the trie from the root node ... */ for (node = rcu_dereference(trie->root); node;) { From 91f31115588405d0e35e132296ae4ac6e08d1c59 Mon Sep 17 00:00:00 2001 From: Jordan Rome Date: Wed, 8 Nov 2023 03:23:34 -0800 Subject: [PATCH 110/288] bpf: Add crosstask check to __bpf_get_stack [ Upstream commit b8e3a87a627b575896e448021e5c2f8a3bc19931 ] Currently get_perf_callchain only supports user stack walking for the current task. Passing the correct *crosstask* param will return 0 frames if the task passed to __bpf_get_stack isn't the current one instead of a single incorrect frame/address. This change passes the correct *crosstask* param but also does a preemptive check in __bpf_get_stack if the task is current and returns -EOPNOTSUPP if it is not. This issue was found using bpf_get_task_stack inside a BPF iterator ("iter/task"), which iterates over all tasks. bpf_get_task_stack works fine for fetching kernel stacks but because get_perf_callchain relies on the caller to know if the requested *task* is the current one (via *crosstask*) it was failing in a confusing way. It might be possible to get user stacks for all tasks utilizing something like access_process_vm but that requires the bpf program calling bpf_get_task_stack to be sleepable and would therefore be a breaking change. Fixes: fa28dcb82a38 ("bpf: Introduce helper bpf_get_task_stack()") Signed-off-by: Jordan Rome Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20231108112334.3433136-1-jordalgo@meta.com Signed-off-by: Sasha Levin --- include/uapi/linux/bpf.h | 3 +++ kernel/bpf/stackmap.c | 11 ++++++++++- tools/include/uapi/linux/bpf.h | 3 +++ 3 files changed, 16 insertions(+), 1 deletion(-) diff --git a/include/uapi/linux/bpf.h b/include/uapi/linux/bpf.h index 36ddfb98b70e..29cc0eb2e488 100644 --- a/include/uapi/linux/bpf.h +++ b/include/uapi/linux/bpf.h @@ -3424,6 +3424,8 @@ union bpf_attr { * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) * Description * Return a user or a kernel stack in bpf program provided buffer. + * Note: the user stack will only be populated if the *task* is + * the current task; all other tasks will return -EOPNOTSUPP. * To achieve this, the helper needs *task*, which is a valid * pointer to **struct task_struct**. To store the stacktrace, the * bpf program provides *buf* with a nonnegative *size*. @@ -3435,6 +3437,7 @@ union bpf_attr { * * **BPF_F_USER_STACK** * Collect a user space stack instead of a kernel stack. + * The *task* must be the current task. * **BPF_F_USER_BUILD_ID** * Collect buildid+offset instead of ips for user stack, * only valid if **BPF_F_USER_STACK** is also specified. diff --git a/kernel/bpf/stackmap.c b/kernel/bpf/stackmap.c index 0c5bf98d5576..b8afea2ceeeb 100644 --- a/kernel/bpf/stackmap.c +++ b/kernel/bpf/stackmap.c @@ -575,6 +575,7 @@ static long __bpf_get_stack(struct pt_regs *regs, struct task_struct *task, { u32 trace_nr, copy_len, elem_size, num_elem, max_depth; bool user_build_id = flags & BPF_F_USER_BUILD_ID; + bool crosstask = task && task != current; u32 skip = flags & BPF_F_SKIP_FIELD_MASK; bool user = flags & BPF_F_USER_STACK; struct perf_callchain_entry *trace; @@ -597,6 +598,14 @@ static long __bpf_get_stack(struct pt_regs *regs, struct task_struct *task, if (task && user && !user_mode(regs)) goto err_fault; + /* get_perf_callchain does not support crosstask user stack walking + * but returns an empty stack instead of NULL. + */ + if (crosstask && user) { + err = -EOPNOTSUPP; + goto clear; + } + num_elem = size / elem_size; max_depth = num_elem + skip; if (sysctl_perf_event_max_stack < max_depth) @@ -608,7 +617,7 @@ static long __bpf_get_stack(struct pt_regs *regs, struct task_struct *task, trace = get_callchain_entry_for_task(task, max_depth); else trace = get_perf_callchain(regs, 0, kernel, user, max_depth, - false, false); + crosstask, false); if (unlikely(!trace)) goto err_fault; diff --git a/tools/include/uapi/linux/bpf.h b/tools/include/uapi/linux/bpf.h index fd1a4d843e6f..63ea5bc6f1c4 100644 --- a/tools/include/uapi/linux/bpf.h +++ b/tools/include/uapi/linux/bpf.h @@ -3424,6 +3424,8 @@ union bpf_attr { * long bpf_get_task_stack(struct task_struct *task, void *buf, u32 size, u64 flags) * Description * Return a user or a kernel stack in bpf program provided buffer. + * Note: the user stack will only be populated if the *task* is + * the current task; all other tasks will return -EOPNOTSUPP. * To achieve this, the helper needs *task*, which is a valid * pointer to **struct task_struct**. To store the stacktrace, the * bpf program provides *buf* with a nonnegative *size*. @@ -3435,6 +3437,7 @@ union bpf_attr { * * **BPF_F_USER_STACK** * Collect a user space stack instead of a kernel stack. + * The *task* must be the current task. * **BPF_F_USER_BUILD_ID** * Collect buildid+offset instead of ips for user stack, * only valid if **BPF_F_USER_STACK** is also specified. From 24d8aef5d93b3ceec0f8a15f1fcd66cbb6a2b8b2 Mon Sep 17 00:00:00 2001 From: Luca Weiss Date: Fri, 27 Oct 2023 08:57:18 +0200 Subject: [PATCH 111/288] wifi: ath11k: Defer on rproc_get failure [ Upstream commit 2a3ec40b98b46c339adb57313d3b933ee5e7a8e8 ] If we already have gotten the rproc_handle (meaning the "qcom,rproc" property is defined in the devicetree), it's a valid state that the remoteproc module hasn't probed yet so we should defer probing instead of just failing to probe. This resolves a race condition when the ath11k driver probes and fails before the wpss remoteproc driver has probed, like the following: [ 6.232360] ath11k 17a10040.wifi: failed to get rproc [ 6.232366] ath11k 17a10040.wifi: failed to get rproc: -22 [ 6.232478] ath11k: probe of 17a10040.wifi failed with error -22 ... [ 6.252415] remoteproc remoteproc2: 8a00000.remoteproc is available [ 6.252776] remoteproc remoteproc2: powering up 8a00000.remoteproc [ 6.252781] remoteproc remoteproc2: Booting fw image qcom/qcm6490/fairphone5/wpss.mdt, size 7188 So, defer the probe if we hit that so we can retry later once the wpss remoteproc is available. Tested-on: WCN6750 hw1.0 AHB WLAN.MSL.1.0.1-01264-QCAMSLSWPLZ-1.37886.3 Fixes: d5c65159f289 ("ath11k: driver for Qualcomm IEEE 802.11ax devices") Signed-off-by: Luca Weiss Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231027-ath11k-rproc-defer-v1-1-f6b6a812cd18@fairphone.com Signed-off-by: Sasha Levin --- drivers/net/wireless/ath/ath11k/ahb.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/ath/ath11k/ahb.c b/drivers/net/wireless/ath/ath11k/ahb.c index 190bc5712e96..24006ddfba89 100644 --- a/drivers/net/wireless/ath/ath11k/ahb.c +++ b/drivers/net/wireless/ath/ath11k/ahb.c @@ -625,8 +625,8 @@ static int ath11k_core_get_rproc(struct ath11k_base *ab) prproc = rproc_get_by_phandle(rproc_phandle); if (!prproc) { - ath11k_err(ab, "failed to get rproc\n"); - return -EINVAL; + ath11k_dbg(ab, ATH11K_DBG_AHB, "failed to get rproc, deferring\n"); + return -EPROBE_DEFER; } ab_ahb->tgt_rproc = prproc; From 4675cacd6b02941867c7d204684937b885704c82 Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Wed, 8 Nov 2023 16:34:03 +0100 Subject: [PATCH 112/288] wifi: libertas: stop selecting wext [ Upstream commit 8170b04c2c92eee52ea50b96db4c54662197e512 ] Libertas no longer references the iw_handler infrastructure or wext_spy, so neither of the 'select' statements are used any more. Fixes: e86dc1ca4676 ("Libertas: cfg80211 support") Signed-off-by: Arnd Bergmann Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231108153409.1065286-1-arnd@kernel.org Signed-off-by: Sasha Levin --- drivers/net/wireless/marvell/libertas/Kconfig | 2 -- 1 file changed, 2 deletions(-) diff --git a/drivers/net/wireless/marvell/libertas/Kconfig b/drivers/net/wireless/marvell/libertas/Kconfig index 6d62ab49aa8d..c7d02adb3eea 100644 --- a/drivers/net/wireless/marvell/libertas/Kconfig +++ b/drivers/net/wireless/marvell/libertas/Kconfig @@ -2,8 +2,6 @@ config LIBERTAS tristate "Marvell 8xxx Libertas WLAN driver support" depends on CFG80211 - select WIRELESS_EXT - select WEXT_SPY select LIB80211 select FW_LOADER help From ae98b7f7bbfb15b03536752ace5186aaa390a514 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Thu, 28 Sep 2023 14:02:35 +0300 Subject: [PATCH 113/288] ARM: dts: qcom: apq8064: correct XOADC register address [ Upstream commit 554557542e709e190eff8a598f0cde02647d533a ] The XOADC is present at the address 0x197 rather than just 197. It doesn't change a lot (since the driver hardcodes all register addresses), but the DT should present correct address anyway. Fixes: c4b70883ee33 ("ARM: dts: add XOADC and IIO HWMON to APQ8064") Reviewed-by: Konrad Dybcio Reviewed-by: Krzysztof Kozlowski Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20230928110309.1212221-3-dmitry.baryshkov@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin --- arch/arm/boot/dts/qcom-apq8064.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm/boot/dts/qcom-apq8064.dtsi b/arch/arm/boot/dts/qcom-apq8064.dtsi index fb25ede1ce9f..3f1002c34446 100644 --- a/arch/arm/boot/dts/qcom-apq8064.dtsi +++ b/arch/arm/boot/dts/qcom-apq8064.dtsi @@ -760,7 +760,7 @@ pwrkey@1c { xoadc: xoadc@197 { compatible = "qcom,pm8921-adc"; - reg = <197>; + reg = <0x197>; interrupts-extended = <&pmicintc 78 IRQ_TYPE_EDGE_RISING>; #address-cells = <2>; #size-cells = <0>; From 7bcddd12a947863ab622495ece5204afbdad716d Mon Sep 17 00:00:00 2001 From: Bhaskar Chowdhury Date: Sat, 27 Mar 2021 04:42:47 +0530 Subject: [PATCH 114/288] ncsi: internal.h: Fix a spello [ Upstream commit 195a8ec4033b4124f6864892e71dcef24ba74a5a ] s/Firware/Firmware/ Signed-off-by: Bhaskar Chowdhury Signed-off-by: David S. Miller Stable-dep-of: 3084b58bfd0b ("net/ncsi: Fix netlink major/minor version numbers") Signed-off-by: Sasha Levin --- net/ncsi/internal.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h index e37102546be6..49031f804276 100644 --- a/net/ncsi/internal.h +++ b/net/ncsi/internal.h @@ -100,7 +100,7 @@ enum { struct ncsi_channel_version { u32 version; /* Supported BCD encoded NCSI version */ u32 alpha2; /* Supported BCD encoded NCSI version */ - u8 fw_name[12]; /* Firware name string */ + u8 fw_name[12]; /* Firmware name string */ u32 fw_version; /* Firmware version */ u16 pci_ids[4]; /* PCI identification */ u32 mf_id; /* Manufacture ID */ From 01f9feb5edc5e8ac641b4875b76abbbcc912df07 Mon Sep 17 00:00:00 2001 From: Peter Delevoryas Date: Tue, 14 Nov 2023 10:07:34 -0600 Subject: [PATCH 115/288] net/ncsi: Fix netlink major/minor version numbers [ Upstream commit 3084b58bfd0b9e4b5e034f31f31b42977db35f12 ] The netlink interface for major and minor version numbers doesn't actually return the major and minor version numbers. It reports a u32 that contains the (major, minor, update, alpha1) components as the major version number, and then alpha2 as the minor version number. For whatever reason, the u32 byte order was reversed (ntohl): maybe it was assumed that the encoded value was a single big-endian u32, and alpha2 was the minor version. The correct way to get the supported NC-SI version from the network controller is to parse the Get Version ID response as described in 8.4.44 of the NC-SI spec[1]. Get Version ID Response Packet Format Bits +--------+--------+--------+--------+ Bytes | 31..24 | 23..16 | 15..8 | 7..0 | +-------+--------+--------+--------+--------+ | 0..15 | NC-SI Header | +-------+--------+--------+--------+--------+ | 16..19| Response code | Reason code | +-------+--------+--------+--------+--------+ |20..23 | Major | Minor | Update | Alpha1 | +-------+--------+--------+--------+--------+ |24..27 | reserved | Alpha2 | +-------+--------+--------+--------+--------+ | .... other stuff .... | The major, minor, and update fields are all binary-coded decimal (BCD) encoded [2]. The spec provides examples below the Get Version ID response format in section 8.4.44.1, but for practical purposes, this is an example from a live network card: root@bmc:~# ncsi-util 0x15 NC-SI Command Response: cmd: GET_VERSION_ID(0x15) Response: COMMAND_COMPLETED(0x0000) Reason: NO_ERROR(0x0000) Payload length = 40 20: 0xf1 0xf1 0xf0 0x00 <<<<<<<<< (major, minor, update, alpha1) 24: 0x00 0x00 0x00 0x00 <<<<<<<<< (_, _, _, alpha2) 28: 0x6d 0x6c 0x78 0x30 32: 0x2e 0x31 0x00 0x00 36: 0x00 0x00 0x00 0x00 40: 0x16 0x1d 0x07 0xd2 44: 0x10 0x1d 0x15 0xb3 48: 0x00 0x17 0x15 0xb3 52: 0x00 0x00 0x81 0x19 This should be parsed as "1.1.0". "f" in the upper-nibble means to ignore it, contributing zero. If both nibbles are "f", I think the whole field is supposed to be ignored. Major and minor are "required", meaning they're not supposed to be "ff", but the update field is "optional" so I think it can be ff. I think the simplest thing to do is just set the major and minor to zero instead of juggling some conditional logic or something. bcd2bin() from "include/linux/bcd.h" seems to assume both nibbles are 0-9, so I've provided a custom BCD decoding function. Alpha1 and alpha2 are ISO/IEC 8859-1 encoded, which just means ASCII characters as far as I can tell, although the full encoding table for non-alphabetic characters is slightly different (I think). I imagine the alpha fields are just supposed to be alphabetic characters, but I haven't seen any network cards actually report a non-zero value for either. If people wrote software against this netlink behavior, and were parsing the major and minor versions themselves from the u32, then this would definitely break their code. [1] https://www.dmtf.org/sites/default/files/standards/documents/DSP0222_1.0.0.pdf [2] https://en.wikipedia.org/wiki/Binary-coded_decimal [2] https://en.wikipedia.org/wiki/ISO/IEC_8859-1 Signed-off-by: Peter Delevoryas Fixes: 138635cc27c9 ("net/ncsi: NCSI response packet handler") Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ncsi/internal.h | 7 +++++-- net/ncsi/ncsi-netlink.c | 4 ++-- net/ncsi/ncsi-pkt.h | 7 +++++-- net/ncsi/ncsi-rsp.c | 26 ++++++++++++++++++++++++-- 4 files changed, 36 insertions(+), 8 deletions(-) diff --git a/net/ncsi/internal.h b/net/ncsi/internal.h index 49031f804276..ec765f2a7569 100644 --- a/net/ncsi/internal.h +++ b/net/ncsi/internal.h @@ -98,8 +98,11 @@ enum { struct ncsi_channel_version { - u32 version; /* Supported BCD encoded NCSI version */ - u32 alpha2; /* Supported BCD encoded NCSI version */ + u8 major; /* NCSI version major */ + u8 minor; /* NCSI version minor */ + u8 update; /* NCSI version update */ + char alpha1; /* NCSI version alpha1 */ + char alpha2; /* NCSI version alpha2 */ u8 fw_name[12]; /* Firmware name string */ u32 fw_version; /* Firmware version */ u16 pci_ids[4]; /* PCI identification */ diff --git a/net/ncsi/ncsi-netlink.c b/net/ncsi/ncsi-netlink.c index c189b4c8a182..db350b8f5d88 100644 --- a/net/ncsi/ncsi-netlink.c +++ b/net/ncsi/ncsi-netlink.c @@ -71,8 +71,8 @@ static int ncsi_write_channel_info(struct sk_buff *skb, if (nc == nc->package->preferred_channel) nla_put_flag(skb, NCSI_CHANNEL_ATTR_FORCED); - nla_put_u32(skb, NCSI_CHANNEL_ATTR_VERSION_MAJOR, nc->version.version); - nla_put_u32(skb, NCSI_CHANNEL_ATTR_VERSION_MINOR, nc->version.alpha2); + nla_put_u32(skb, NCSI_CHANNEL_ATTR_VERSION_MAJOR, nc->version.major); + nla_put_u32(skb, NCSI_CHANNEL_ATTR_VERSION_MINOR, nc->version.minor); nla_put_string(skb, NCSI_CHANNEL_ATTR_VERSION_STR, nc->version.fw_name); vid_nest = nla_nest_start_noflag(skb, NCSI_CHANNEL_ATTR_VLAN_LIST); diff --git a/net/ncsi/ncsi-pkt.h b/net/ncsi/ncsi-pkt.h index 80938b338fee..3fbea7e74fb1 100644 --- a/net/ncsi/ncsi-pkt.h +++ b/net/ncsi/ncsi-pkt.h @@ -191,9 +191,12 @@ struct ncsi_rsp_gls_pkt { /* Get Version ID */ struct ncsi_rsp_gvi_pkt { struct ncsi_rsp_pkt_hdr rsp; /* Response header */ - __be32 ncsi_version; /* NCSI version */ + unsigned char major; /* NCSI version major */ + unsigned char minor; /* NCSI version minor */ + unsigned char update; /* NCSI version update */ + unsigned char alpha1; /* NCSI version alpha1 */ unsigned char reserved[3]; /* Reserved */ - unsigned char alpha2; /* NCSI version */ + unsigned char alpha2; /* NCSI version alpha2 */ unsigned char fw_name[12]; /* f/w name string */ __be32 fw_version; /* f/w version */ __be16 pci_ids[4]; /* PCI IDs */ diff --git a/net/ncsi/ncsi-rsp.c b/net/ncsi/ncsi-rsp.c index 888ccc2d4e34..6a4638811660 100644 --- a/net/ncsi/ncsi-rsp.c +++ b/net/ncsi/ncsi-rsp.c @@ -19,6 +19,19 @@ #include "ncsi-pkt.h" #include "ncsi-netlink.h" +/* Nibbles within [0xA, 0xF] add zero "0" to the returned value. + * Optional fields (encoded as 0xFF) will default to zero. + */ +static u8 decode_bcd_u8(u8 x) +{ + int lo = x & 0xF; + int hi = x >> 4; + + lo = lo < 0xA ? lo : 0; + hi = hi < 0xA ? hi : 0; + return lo + hi * 10; +} + static int ncsi_validate_rsp_pkt(struct ncsi_request *nr, unsigned short payload) { @@ -755,9 +768,18 @@ static int ncsi_rsp_handler_gvi(struct ncsi_request *nr) if (!nc) return -ENODEV; - /* Update to channel's version info */ + /* Update channel's version info + * + * Major, minor, and update fields are supposed to be + * unsigned integers encoded as packed BCD. + * + * Alpha1 and alpha2 are ISO/IEC 8859-1 characters. + */ ncv = &nc->version; - ncv->version = ntohl(rsp->ncsi_version); + ncv->major = decode_bcd_u8(rsp->major); + ncv->minor = decode_bcd_u8(rsp->minor); + ncv->update = decode_bcd_u8(rsp->update); + ncv->alpha1 = rsp->alpha1; ncv->alpha2 = rsp->alpha2; memcpy(ncv->fw_name, rsp->fw_name, 12); ncv->fw_version = ntohl(rsp->fw_version); From 3959dbb37595272609e47575bfaa8a5b1ee8e012 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 30 Oct 2023 11:12:26 +0100 Subject: [PATCH 116/288] firmware: ti_sci: Fix an off-by-one in ti_sci_debugfs_create() [ Upstream commit 964946b88887089f447a9b6a28c39ee97dc76360 ] The ending NULL is not taken into account by strncat(), so switch to snprintf() to correctly build 'debug_name'. Using snprintf() also makes the code more readable. Fixes: aa276781a64a ("firmware: Add basic support for TI System Control Interface (TI-SCI) protocol") Signed-off-by: Christophe JAILLET Reviewed-by: Dan Carpenter Link: https://lore.kernel.org/r/7158db0a4d7b19855ddd542ec61b666973aad8dc.1698660720.git.christophe.jaillet@wanadoo.fr Signed-off-by: Nishanth Menon Signed-off-by: Sasha Levin --- drivers/firmware/ti_sci.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/firmware/ti_sci.c b/drivers/firmware/ti_sci.c index fe6be0771a07..b0576cec263b 100644 --- a/drivers/firmware/ti_sci.c +++ b/drivers/firmware/ti_sci.c @@ -161,7 +161,7 @@ static int ti_sci_debugfs_create(struct platform_device *pdev, { struct device *dev = &pdev->dev; struct resource *res; - char debug_name[50] = "ti_sci_debug@"; + char debug_name[50]; /* Debug region is optional */ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, @@ -178,10 +178,10 @@ static int ti_sci_debugfs_create(struct platform_device *pdev, /* Setup NULL termination */ info->debug_buffer[info->debug_region_size] = 0; - info->d = debugfs_create_file(strncat(debug_name, dev_name(dev), - sizeof(debug_name) - - sizeof("ti_sci_debug@")), - 0444, NULL, info, &ti_sci_debug_fops); + snprintf(debug_name, sizeof(debug_name), "ti_sci_debug@%s", + dev_name(dev)); + info->d = debugfs_create_file(debug_name, 0444, NULL, info, + &ti_sci_debug_fops); if (IS_ERR(info->d)) return PTR_ERR(info->d); From 2799324d92a64f95b05d262cb8838e2bff05b1de Mon Sep 17 00:00:00 2001 From: Dmitry Rokosov Date: Fri, 24 Mar 2023 17:55:57 +0300 Subject: [PATCH 117/288] firmware: meson_sm: populate platform devices from sm device tree data [ Upstream commit e45f243409db98d610248c843b25435e7fb0baf3 ] In some meson boards, secure monitor device has children, for example, power secure controller. By default, secure monitor isn't the bus in terms of device tree subsystem, so the of_platform initialization code doesn't populate its device tree data. As a result, secure monitor's children aren't probed at all. Run the 'of_platform_populate()' routine manually to resolve such issues. Signed-off-by: Dmitry Rokosov Acked-by: Martin Blumenstingl Link: https://lore.kernel.org/r/20230324145557.27797-1-ddrokosov@sberdevices.ru Signed-off-by: Neil Armstrong Stable-dep-of: d8385d7433f9 ("firmware: meson-sm: unmap out_base shmem in error path") Signed-off-by: Sasha Levin --- drivers/firmware/meson/meson_sm.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/firmware/meson/meson_sm.c b/drivers/firmware/meson/meson_sm.c index ed27ff2e503e..7dff8833132d 100644 --- a/drivers/firmware/meson/meson_sm.c +++ b/drivers/firmware/meson/meson_sm.c @@ -313,11 +313,14 @@ static int __init meson_sm_probe(struct platform_device *pdev) platform_set_drvdata(pdev, fw); - pr_info("secure-monitor enabled\n"); + if (devm_of_platform_populate(dev)) + goto out_in_base; if (sysfs_create_group(&pdev->dev.kobj, &meson_sm_sysfs_attr_group)) goto out_in_base; + pr_info("secure-monitor enabled\n"); + return 0; out_in_base: From d49863ed285d7b36cfe92a3d46c02597576c6dcf Mon Sep 17 00:00:00 2001 From: Su Hui Date: Mon, 27 Nov 2023 09:35:13 +0800 Subject: [PATCH 118/288] wifi: rtlwifi: rtl8821ae: phy: fix an undefined bitwise shift behavior [ Upstream commit bc8263083af60e7e57c6120edbc1f75d6c909a35 ] Clang static checker warns: drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c:184:49: The result of the left shift is undefined due to shifting by '32', which is greater or equal to the width of type 'u32'. [core.UndefinedBinaryOperatorResult] If the value of the right operand is negative or is greater than or equal to the width of the promoted left operand, the behavior is undefined.[1][2] For example, when using different gcc's compilation optimization options (-O0 or -O2), the result of '(u32)data << 32' is different. One is 0, the other is old value of data. Let _rtl8821ae_phy_calculate_bit_shift()'s return value less than 32 to fix this problem. Warn if bitmask is zero. [1] https://stackoverflow.com/questions/11270492/what-does-the-c-standard-say-about-bitshifting-more-bits-than-the-width-of-type [2] https://www.open-std.org/jtc1/sc22/wg14/www/docs/n1256.pdf Fixes: 21e4b0726dc6 ("rtlwifi: rtl8821ae: Move driver from staging to regular tree") Signed-off-by: Su Hui Acked-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231127013511.26694-2-suhui@nfschina.com Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c index c0c06ab6d3e7..fb143a5f9cc3 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8821ae/phy.c @@ -29,9 +29,10 @@ static void _rtl8821ae_phy_rf_serial_write(struct ieee80211_hw *hw, u32 data); static u32 _rtl8821ae_phy_calculate_bit_shift(u32 bitmask) { - u32 i = ffs(bitmask); + if (WARN_ON_ONCE(!bitmask)) + return 0; - return i ? i - 1 : 32; + return __ffs(bitmask); } static bool _rtl8821ae_phy_bb8821a_config_parafile(struct ieee80211_hw *hw); /*static bool _rtl8812ae_phy_config_mac_with_headerfile(struct ieee80211_hw *hw);*/ From 7e98bbeb0708541f9ef152973c18f401a25b924b Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Mon, 6 Nov 2023 11:57:48 +0200 Subject: [PATCH 119/288] arm64: dts: ti: k3-am65-main: Fix DSS irq trigger type [ Upstream commit b57160859263c083c49482b0d083a586b1517f78 ] DSS irq trigger type is set to IRQ_TYPE_EDGE_RISING in the DT file, but the TRM says it is level triggered. For some reason triggering on rising edge results in double the amount of expected interrupts, e.g. for normal page flipping test the number of interrupts per second is 2 * fps. It is as if the IRQ triggers on both edges. There are no other side effects to this issue than slightly increased CPU & power consumption due to the extra interrupt. Switching to IRQ_TYPE_LEVEL_HIGH is correct and fixes the issue, so let's do that. Fixes: fc539b90eda2 ("arm64: dts: ti: am654: Add DSS node") Signed-off-by: Tomi Valkeinen Reviewed-by: Aradhya Bhatia Link: https://lore.kernel.org/r/20231106-am65-dss-clk-edge-v1-1-4a959fec0e1e@ideasonboard.com Signed-off-by: Nishanth Menon Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/ti/k3-am65-main.dtsi | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi index 4265f627ca16..a3538279d710 100644 --- a/arch/arm64/boot/dts/ti/k3-am65-main.dtsi +++ b/arch/arm64/boot/dts/ti/k3-am65-main.dtsi @@ -865,7 +865,7 @@ dss: dss@4a00000 { assigned-clocks = <&k3_clks 67 2>; assigned-clock-parents = <&k3_clks 67 5>; - interrupts = ; + interrupts = ; status = "disabled"; From 2757f17972d87773b3677777f5682510f13c66ef Mon Sep 17 00:00:00 2001 From: Andrii Nakryiko Date: Tue, 5 Dec 2023 10:42:41 -0800 Subject: [PATCH 120/288] bpf: fix check for attempt to corrupt spilled pointer [ Upstream commit ab125ed3ec1c10ccc36bc98c7a4256ad114a3dae ] When register is spilled onto a stack as a 1/2/4-byte register, we set slot_type[BPF_REG_SIZE - 1] (plus potentially few more below it, depending on actual spill size). So to check if some stack slot has spilled register we need to consult slot_type[7], not slot_type[0]. To avoid the need to remember and double-check this in the future, just use is_spilled_reg() helper. Fixes: 27113c59b6d0 ("bpf: Check the other end of slot_type for STACK_SPILL") Signed-off-by: Andrii Nakryiko Link: https://lore.kernel.org/r/20231205184248.1502704-4-andrii@kernel.org Signed-off-by: Alexei Starovoitov Signed-off-by: Sasha Levin --- kernel/bpf/verifier.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index 45c50ee9b037..ddfd33703f4d 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -2493,7 +2493,7 @@ static int check_stack_write_fixed_off(struct bpf_verifier_env *env, * so it's aligned access and [off, off + size) are within stack limits */ if (!env->allow_ptr_leaks && - state->stack[spi].slot_type[0] == STACK_SPILL && + is_spilled_reg(&state->stack[spi]) && size != BPF_REG_SIZE) { verbose(env, "attempt to corrupt spilled pointer on stack\n"); return -EACCES; From ba31bb08c15cac449c8385325841c6bbfb040b86 Mon Sep 17 00:00:00 2001 From: Artem Chernyshev Date: Tue, 28 Nov 2023 14:10:08 +0300 Subject: [PATCH 121/288] scsi: fnic: Return error if vmalloc() failed [ Upstream commit f5f27a332a14f43463aa0075efa3a0c662c0f4a8 ] In fnic_init_module() exists redundant check for return value from fnic_debugfs_init(), because at moment it only can return zero. It make sense to process theoretical vmalloc() failure. Found by Linux Verification Center (linuxtesting.org) with SVACE. Fixes: 9730ddfb123d ("scsi: fnic: remove redundant assignment of variable rc") Signed-off-by: Artem Chernyshev Link: https://lore.kernel.org/r/20231128111008.2280507-1-artem.chernyshev@red-soft.ru Reviewed-by: Karan Tilak Kumar Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/fnic/fnic_debugfs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/scsi/fnic/fnic_debugfs.c b/drivers/scsi/fnic/fnic_debugfs.c index 6c049360f136..56d52efc7314 100644 --- a/drivers/scsi/fnic/fnic_debugfs.c +++ b/drivers/scsi/fnic/fnic_debugfs.c @@ -67,9 +67,10 @@ int fnic_debugfs_init(void) fc_trc_flag->fnic_trace = 2; fc_trc_flag->fc_trace = 3; fc_trc_flag->fc_clear = 4; + return 0; } - return 0; + return -ENOMEM; } /* From 812cebdc5f7b2e7e5de4380e5426d3966f80c7d4 Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 11 Nov 2023 10:46:23 +0100 Subject: [PATCH 122/288] arm64: dts: qcom: qrb5165-rb5: correct LED panic indicator [ Upstream commit dc6b5562acbac0285ab3b2dad23930b6434bdfc6 ] There is no "panic-indicator" default trigger but a property with that name: qrb5165-rb5.dtb: leds: led-user4: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected) Fixes: b5cbd84e499a ("arm64: dts: qcom: qrb5165-rb5: Add onboard LED support") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Manivannan Sadhasivam Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231111094623.12476-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/qcom/qrb5165-rb5.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts index 949fee6949e6..5516d2067c82 100644 --- a/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts +++ b/arch/arm64/boot/dts/qcom/qrb5165-rb5.dts @@ -38,8 +38,8 @@ leds { user4 { label = "green:user4"; gpios = <&pm8150_gpios 10 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "panic-indicator"; default-state = "off"; + panic-indicator; }; wlan { From 419ab8f74a4bed44efe302df21c5d018ddd52f8e Mon Sep 17 00:00:00 2001 From: Krzysztof Kozlowski Date: Sat, 11 Nov 2023 10:56:16 +0100 Subject: [PATCH 123/288] arm64: dts: qcom: sdm845-db845c: correct LED panic indicator [ Upstream commit 0c90c75e663246203a2b7f6dd9e08a110f4c3c43 ] There is no "panic-indicator" default trigger but a property with that name: sdm845-db845c.dtb: leds: led-0: Unevaluated properties are not allowed ('linux,default-trigger' was unexpected) Fixes: 3f72e2d3e682 ("arm64: dts: qcom: Add Dragonboard 845c") Signed-off-by: Krzysztof Kozlowski Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231111095617.16496-1-krzysztof.kozlowski@linaro.org Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin --- arch/arm64/boot/dts/qcom/sdm845-db845c.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts index 1e889ca932e4..31f4f0575094 100644 --- a/arch/arm64/boot/dts/qcom/sdm845-db845c.dts +++ b/arch/arm64/boot/dts/qcom/sdm845-db845c.dts @@ -55,8 +55,8 @@ leds { user4 { label = "green:user4"; gpios = <&pm8998_gpio 13 GPIO_ACTIVE_HIGH>; - linux,default-trigger = "panic-indicator"; default-state = "off"; + panic-indicator; }; wlan { From afea95d319ccb4ad2060dece9ac5e2e364dec543 Mon Sep 17 00:00:00 2001 From: Andrei Matei Date: Wed, 6 Dec 2023 23:11:48 -0500 Subject: [PATCH 124/288] bpf: Fix verification of indirect var-off stack access [ Upstream commit a833a17aeac73b33f79433d7cee68d5cafd71e4f ] This patch fixes a bug around the verification of possibly-zero-sized stack accesses. When the access was done through a var-offset stack pointer, check_stack_access_within_bounds was incorrectly computing the maximum-offset of a zero-sized read to be the same as the register's min offset. Instead, we have to take in account the register's maximum possible value. The patch also simplifies how the max offset is checked; the check is now simpler than for min offset. The bug was allowing accesses to erroneously pass the check_stack_access_within_bounds() checks, only to later crash in check_stack_range_initialized() when all the possibly-affected stack slots are iterated (this time with a correct max offset). check_stack_range_initialized() is relying on check_stack_access_within_bounds() for its accesses to the stack-tracking vector to be within bounds; in the case of zero-sized accesses, we were essentially only verifying that the lowest possible slot was within bounds. We would crash when the max-offset of the stack pointer was >= 0 (which shouldn't pass verification, and hopefully is not something anyone's code attempts to do in practice). Thanks Hao for reporting! Fixes: 01f810ace9ed3 ("bpf: Allow variable-offset stack access") Reported-by: Hao Sun Signed-off-by: Andrei Matei Signed-off-by: Andrii Nakryiko Acked-by: Eduard Zingerman Acked-by: Andrii Nakryiko Link: https://lore.kernel.org/bpf/20231207041150.229139-2-andreimatei1@gmail.com Closes: https://lore.kernel.org/bpf/CACkBjsZGEUaRCHsmaX=h-efVogsRfK1FPxmkgb0Os_frnHiNdw@mail.gmail.com/ Signed-off-by: Sasha Levin --- kernel/bpf/verifier.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/kernel/bpf/verifier.c b/kernel/bpf/verifier.c index ddfd33703f4d..fce2345f600f 100644 --- a/kernel/bpf/verifier.c +++ b/kernel/bpf/verifier.c @@ -3926,10 +3926,7 @@ static int check_stack_access_within_bounds( if (tnum_is_const(reg->var_off)) { min_off = reg->var_off.value + off; - if (access_size > 0) - max_off = min_off + access_size - 1; - else - max_off = min_off; + max_off = min_off + access_size; } else { if (reg->smax_value >= BPF_MAX_VAR_OFF || reg->smin_value <= -BPF_MAX_VAR_OFF) { @@ -3938,15 +3935,12 @@ static int check_stack_access_within_bounds( return -EACCES; } min_off = reg->smin_value + off; - if (access_size > 0) - max_off = reg->smax_value + off + access_size - 1; - else - max_off = min_off; + max_off = reg->smax_value + off + access_size; } err = check_stack_slot_within_bounds(min_off, state, type); - if (!err) - err = check_stack_slot_within_bounds(max_off, state, type); + if (!err && max_off > 0) + err = -EINVAL; /* out of stack access into non-negative offsets */ if (err) { if (tnum_is_const(reg->var_off)) { From 7a0f8295e7e15af30ef16586e9ea6775c90364fd Mon Sep 17 00:00:00 2001 From: Yihang Li Date: Thu, 14 Dec 2023 11:45:13 +0800 Subject: [PATCH 125/288] scsi: hisi_sas: Replace with standard error code return value [ Upstream commit d34ee535705eb43885bc0f561c63046f697355ad ] In function hisi_sas_controller_prereset(), -ENOSYS (Function not implemented) should be returned if the driver does not support .soft_reset. Returns -EPERM (Operation not permitted) if HISI_SAS_RESETTING_BIT is already be set. In function _suspend_v3_hw(), returns -EPERM (Operation not permitted) if HISI_SAS_RESETTING_BIT is already be set. Fixes: 4522204ab218 ("scsi: hisi_sas: tidy host controller reset function a bit") Signed-off-by: Yihang Li Signed-off-by: Xiang Chen Link: https://lore.kernel.org/r/1702525516-51258-3-git-send-email-chenxiang66@hisilicon.com Signed-off-by: Martin K. Petersen Signed-off-by: Sasha Levin --- drivers/scsi/hisi_sas/hisi_sas_main.c | 4 ++-- drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/scsi/hisi_sas/hisi_sas_main.c b/drivers/scsi/hisi_sas/hisi_sas_main.c index e5b9229310a0..8e5d23c6b8de 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_main.c +++ b/drivers/scsi/hisi_sas/hisi_sas_main.c @@ -1584,10 +1584,10 @@ static int hisi_sas_controller_reset(struct hisi_hba *hisi_hba) queue_work(hisi_hba->wq, &hisi_hba->debugfs_work); if (!hisi_hba->hw->soft_reset) - return -1; + return -ENOENT; if (test_and_set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)) - return -1; + return -EPERM; dev_info(dev, "controller resetting...\n"); hisi_sas_controller_reset_prepare(hisi_hba); diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c index 0d21c64efa81..f03a09c9e865 100644 --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c @@ -3479,7 +3479,7 @@ static int _suspend_v3_hw(struct device *device) } if (test_and_set_bit(HISI_SAS_RESET_BIT, &hisi_hba->flags)) - return -1; + return -EPERM; scsi_block_requests(shost); set_bit(HISI_SAS_REJECT_CMD_BIT, &hisi_hba->flags); From 30ae0c6631415a4d333e52da06108a8ef3f3be29 Mon Sep 17 00:00:00 2001 From: Hangbin Liu Date: Wed, 13 Dec 2023 14:08:49 +0800 Subject: [PATCH 126/288] selftests/net: fix grep checking for fib_nexthop_multiprefix [ Upstream commit a33e9da3470499e9ff476138f271fb52d6bfe767 ] When running fib_nexthop_multiprefix test I saw all IPv6 test failed. e.g. ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [FAIL] With -v it shows COMMAND: ip netns exec h0 /usr/sbin/ping6 -s 1350 -c5 -w5 2001:db8:101::1 PING 2001:db8:101::1(2001:db8:101::1) 1350 data bytes From 2001:db8:100::64 icmp_seq=1 Packet too big: mtu=1300 --- 2001:db8:101::1 ping statistics --- 1 packets transmitted, 0 received, +1 errors, 100% packet loss, time 0ms Route get 2001:db8:101::1 via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 metric 1024 expires 599sec mtu 1300 pref medium Searching for: 2001:db8:101::1 from :: via 2001:db8:100::64 dev eth0 src 2001:db8:100::1 .* mtu 1300 The reason is when CONFIG_IPV6_SUBTREES is not enabled, rt6_fill_node() will not put RTA_SRC info. After fix: ]# ./fib_nexthop_multiprefix.sh TEST: IPv4: host 0 to host 1, mtu 1300 [ OK ] TEST: IPv6: host 0 to host 1, mtu 1300 [ OK ] Fixes: 735ab2f65dce ("selftests: Add test with multiple prefixes using single nexthop") Signed-off-by: Hangbin Liu Link: https://lore.kernel.org/r/20231213060856.4030084-7-liuhangbin@gmail.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- tools/testing/selftests/net/fib_nexthop_multiprefix.sh | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh index 51df5e305855..b52d59547fc5 100755 --- a/tools/testing/selftests/net/fib_nexthop_multiprefix.sh +++ b/tools/testing/selftests/net/fib_nexthop_multiprefix.sh @@ -209,12 +209,12 @@ validate_v6_exception() echo "Route get" ip -netns h0 -6 ro get ${dst} echo "Searching for:" - echo " ${dst} from :: via ${r1} dev eth0 src ${h0} .* mtu ${mtu}" + echo " ${dst}.* via ${r1} dev eth0 src ${h0} .* mtu ${mtu}" echo fi ip -netns h0 -6 ro get ${dst} | \ - grep -q "${dst} from :: via ${r1} dev eth0 src ${h0} .* mtu ${mtu}" + grep -q "${dst}.* via ${r1} dev eth0 src ${h0} .* mtu ${mtu}" rc=$? log_test $rc 0 "IPv6: host 0 to host ${i}, mtu ${mtu}" From ad43344ab432994e98200d764a02f216a99081a8 Mon Sep 17 00:00:00 2001 From: Arseniy Krasnov Date: Thu, 14 Dec 2023 15:52:28 +0300 Subject: [PATCH 127/288] virtio/vsock: fix logic which reduces credit update messages [ Upstream commit 93b80887668226180ea5f5349cc728ca6dc700ab ] Add one more condition for sending credit update during dequeue from stream socket: when number of bytes in the rx queue is smaller than SO_RCVLOWAT value of the socket. This is actual for non-default value of SO_RCVLOWAT (e.g. not 1) - idea is to "kick" peer to continue data transmission, because we need at least SO_RCVLOWAT bytes in our rx queue to wake up user for reading data (in corner case it is also possible to stuck both tx and rx sides, this is why 'Fixes' is used). Fixes: b89d882dc9fc ("vsock/virtio: reduce credit update messages") Signed-off-by: Arseniy Krasnov Reviewed-by: Stefano Garzarella Acked-by: Michael S. Tsirkin Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/vmw_vsock/virtio_transport_common.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-) diff --git a/net/vmw_vsock/virtio_transport_common.c b/net/vmw_vsock/virtio_transport_common.c index 080e8f2bf985..4102689b3348 100644 --- a/net/vmw_vsock/virtio_transport_common.c +++ b/net/vmw_vsock/virtio_transport_common.c @@ -340,6 +340,8 @@ virtio_transport_stream_do_dequeue(struct vsock_sock *vsk, struct virtio_vsock_pkt *pkt; size_t bytes, total = 0; u32 free_space; + u32 fwd_cnt_delta; + bool low_rx_bytes; int err = -EFAULT; spin_lock_bh(&vvs->rx_lock); @@ -371,7 +373,10 @@ virtio_transport_stream_do_dequeue(struct vsock_sock *vsk, } } - free_space = vvs->buf_alloc - (vvs->fwd_cnt - vvs->last_fwd_cnt); + fwd_cnt_delta = vvs->fwd_cnt - vvs->last_fwd_cnt; + free_space = vvs->buf_alloc - fwd_cnt_delta; + low_rx_bytes = (vvs->rx_bytes < + sock_rcvlowat(sk_vsock(vsk), 0, INT_MAX)); spin_unlock_bh(&vvs->rx_lock); @@ -381,9 +386,11 @@ virtio_transport_stream_do_dequeue(struct vsock_sock *vsk, * too high causes extra messages. Too low causes transmitter * stalls. As stalls are in theory more expensive than extra * messages, we set the limit to a high value. TODO: experiment - * with different values. + * with different values. Also send credit update message when + * number of bytes in rx queue is not enough to wake up reader. */ - if (free_space < VIRTIO_VSOCK_MAX_PKT_BUF_SIZE) { + if (fwd_cnt_delta && + (free_space < VIRTIO_VSOCK_MAX_PKT_BUF_SIZE || low_rx_bytes)) { virtio_transport_send_credit_update(vsk, VIRTIO_VSOCK_TYPE_STREAM, NULL); From a6dd1095640be7046729f9a16e303aada0102301 Mon Sep 17 00:00:00 2001 From: Mark-PK Tsai Date: Fri, 22 Apr 2022 14:24:35 +0800 Subject: [PATCH 128/288] dma-mapping: Add dma_release_coherent_memory to DMA API [ Upstream commit e61c451476e61450f6771ce03bbc01210a09be16 ] Add dma_release_coherent_memory to DMA API to allow dma user call it to release dev->dma_mem when the device is removed. Signed-off-by: Mark-PK Tsai Acked-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220422062436.14384-2-mark-pk.tsai@mediatek.com Signed-off-by: Mathieu Poirier Stable-dep-of: b07bc2347672 ("dma-mapping: clear dev->dma_mem to NULL after freeing it") Signed-off-by: Sasha Levin --- include/linux/dma-map-ops.h | 3 +++ kernel/dma/coherent.c | 10 ++++++++-- 2 files changed, 11 insertions(+), 2 deletions(-) diff --git a/include/linux/dma-map-ops.h b/include/linux/dma-map-ops.h index a5f89fc4d6df..22e3bfebdc34 100644 --- a/include/linux/dma-map-ops.h +++ b/include/linux/dma-map-ops.h @@ -165,6 +165,7 @@ static inline void dma_pernuma_cma_reserve(void) { } #ifdef CONFIG_DMA_DECLARE_COHERENT int dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr, dma_addr_t device_addr, size_t size); +void dma_release_coherent_memory(struct device *dev); int dma_alloc_from_dev_coherent(struct device *dev, ssize_t size, dma_addr_t *dma_handle, void **ret); int dma_release_from_dev_coherent(struct device *dev, int order, void *vaddr); @@ -183,6 +184,8 @@ static inline int dma_declare_coherent_memory(struct device *dev, { return -ENOSYS; } + +#define dma_release_coherent_memory(dev) (0) #define dma_alloc_from_dev_coherent(dev, size, handle, ret) (0) #define dma_release_from_dev_coherent(dev, order, vaddr) (0) #define dma_mmap_from_dev_coherent(dev, vma, vaddr, order, ret) (0) diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c index 5b5b6c7ec7f2..b79d8d0433dd 100644 --- a/kernel/dma/coherent.c +++ b/kernel/dma/coherent.c @@ -84,7 +84,7 @@ static int dma_init_coherent_memory(phys_addr_t phys_addr, return ret; } -static void dma_release_coherent_memory(struct dma_coherent_mem *mem) +static void _dma_release_coherent_memory(struct dma_coherent_mem *mem) { if (!mem) return; @@ -136,10 +136,16 @@ int dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr, ret = dma_assign_coherent_memory(dev, mem); if (ret) - dma_release_coherent_memory(mem); + _dma_release_coherent_memory(mem); return ret; } +void dma_release_coherent_memory(struct device *dev) +{ + if (dev) + _dma_release_coherent_memory(dev->dma_mem); +} + static void *__dma_alloc_from_coherent(struct device *dev, struct dma_coherent_mem *mem, ssize_t size, dma_addr_t *dma_handle) From 64299791d070fc07e897783d0de75f530d460066 Mon Sep 17 00:00:00 2001 From: Joakim Zhang Date: Thu, 14 Dec 2023 16:25:26 +0800 Subject: [PATCH 129/288] dma-mapping: clear dev->dma_mem to NULL after freeing it [ Upstream commit b07bc2347672cc8c7293c64499f1488278c5ca3d ] Reproduced with below sequence: dma_declare_coherent_memory()->dma_release_coherent_memory() ->dma_declare_coherent_memory()->"return -EBUSY" error It will return -EBUSY from the dma_assign_coherent_memory() in dma_declare_coherent_memory(), the reason is that dev->dma_mem pointer has not been set to NULL after it's freed. Fixes: cf65a0f6f6ff ("dma-mapping: move all DMA mapping code to kernel/dma") Signed-off-by: Joakim Zhang Signed-off-by: Christoph Hellwig Signed-off-by: Sasha Levin --- kernel/dma/coherent.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/kernel/dma/coherent.c b/kernel/dma/coherent.c index b79d8d0433dd..49aaad3936f1 100644 --- a/kernel/dma/coherent.c +++ b/kernel/dma/coherent.c @@ -142,8 +142,10 @@ int dma_declare_coherent_memory(struct device *dev, phys_addr_t phys_addr, void dma_release_coherent_memory(struct device *dev) { - if (dev) + if (dev) { _dma_release_coherent_memory(dev->dma_mem); + dev->dma_mem = NULL; + } } static void *__dma_alloc_from_coherent(struct device *dev, From 31b651a7a17d64f9add0510bbd03dfa8e74ec8a0 Mon Sep 17 00:00:00 2001 From: Su Hui Date: Tue, 19 Dec 2023 14:57:29 +0800 Subject: [PATCH 130/288] wifi: rtlwifi: add calculate_bit_shift() [ Upstream commit 52221dfddbbfb5b4e029bb2efe9bb7da33ec1e46 ] There are many same functions like _rtl88e_phy_calculate_bit_shift(), _rtl92c_phy_calculate_bit_shift() and so on. And these functions can cause undefined bitwise shift behavior. Add calculate_bit_shift() to replace them and fix undefined behavior in subsequent patches. Signed-off-by: Su Hui Acked-by: Ping-Ke Shih Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-2-suhui@nfschina.com Stable-dep-of: 969bc926f04b ("wifi: rtlwifi: rtl8188ee: phy: using calculate_bit_shift()") Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtlwifi/wifi.h | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/net/wireless/realtek/rtlwifi/wifi.h b/drivers/net/wireless/realtek/rtlwifi/wifi.h index fdccfd29fd61..a89e232d6963 100644 --- a/drivers/net/wireless/realtek/rtlwifi/wifi.h +++ b/drivers/net/wireless/realtek/rtlwifi/wifi.h @@ -3111,4 +3111,11 @@ static inline struct ieee80211_sta *rtl_find_sta(struct ieee80211_hw *hw, return ieee80211_find_sta(mac->vif, mac_addr); } +static inline u32 calculate_bit_shift(u32 bitmask) +{ + if (WARN_ON_ONCE(!bitmask)) + return 0; + + return __ffs(bitmask); +} #endif From 483c975e4094b219d003d8e794f1df8617323832 Mon Sep 17 00:00:00 2001 From: Su Hui Date: Tue, 19 Dec 2023 14:57:31 +0800 Subject: [PATCH 131/288] wifi: rtlwifi: rtl8188ee: phy: using calculate_bit_shift() [ Upstream commit 969bc926f04b438676768aeffffffb050e480b62 ] Using calculate_bit_shift() to replace _rtl88e_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: f0eb856e0b6c ("rtlwifi: rtl8188ee: Add new driver") Signed-off-by: Su Hui Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-4-suhui@nfschina.com Signed-off-by: Sasha Levin --- .../net/wireless/realtek/rtlwifi/rtl8188ee/phy.c | 14 ++++---------- 1 file changed, 4 insertions(+), 10 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c index 9be032e8ec95..3395601eaa59 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8188ee/phy.c @@ -16,12 +16,6 @@ static u32 _rtl88e_phy_rf_serial_read(struct ieee80211_hw *hw, static void _rtl88e_phy_rf_serial_write(struct ieee80211_hw *hw, enum radio_path rfpath, u32 offset, u32 data); -static u32 _rtl88e_phy_calculate_bit_shift(u32 bitmask) -{ - u32 i = ffs(bitmask); - - return i ? i - 1 : 32; -} static bool _rtl88e_phy_bb8188e_config_parafile(struct ieee80211_hw *hw); static bool _rtl88e_phy_config_mac_with_headerfile(struct ieee80211_hw *hw); static bool phy_config_bb_with_headerfile(struct ieee80211_hw *hw, @@ -51,7 +45,7 @@ u32 rtl88e_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, "regaddr(%#x), bitmask(%#x)\n", regaddr, bitmask); originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl88e_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); returnvalue = (originalvalue & bitmask) >> bitshift; rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, @@ -74,7 +68,7 @@ void rtl88e_phy_set_bb_reg(struct ieee80211_hw *hw, if (bitmask != MASKDWORD) { originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl88e_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((originalvalue & (~bitmask)) | (data << bitshift)); } @@ -99,7 +93,7 @@ u32 rtl88e_phy_query_rf_reg(struct ieee80211_hw *hw, original_value = _rtl88e_phy_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl88e_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); readback_value = (original_value & bitmask) >> bitshift; spin_unlock(&rtlpriv->locks.rf_lock); @@ -127,7 +121,7 @@ void rtl88e_phy_set_rf_reg(struct ieee80211_hw *hw, original_value = _rtl88e_phy_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl88e_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((original_value & (~bitmask)) | (data << bitshift)); From bf277a76d31a86f5dcfb59a6892e6b9fbf673258 Mon Sep 17 00:00:00 2001 From: Su Hui Date: Tue, 19 Dec 2023 14:57:32 +0800 Subject: [PATCH 132/288] wifi: rtlwifi: rtl8192c: using calculate_bit_shift() [ Upstream commit 1dedc3a6699d827d345019e921b8d8f37f694333 ] Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 4295cd254af3 ("rtlwifi: Move common parts of rtl8192ce/phy.c") Signed-off-by: Su Hui Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-5-suhui@nfschina.com Signed-off-by: Sasha Levin --- .../wireless/realtek/rtlwifi/rtl8192c/phy_common.c | 12 ++---------- .../wireless/realtek/rtlwifi/rtl8192c/phy_common.h | 1 - 2 files changed, 2 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c index 3d29c8dbb255..144ee780e1b6 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.c @@ -17,7 +17,7 @@ u32 rtl92c_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, "regaddr(%#x), bitmask(%#x)\n", regaddr, bitmask); originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl92c_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); returnvalue = (originalvalue & bitmask) >> bitshift; rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, @@ -40,7 +40,7 @@ void rtl92c_phy_set_bb_reg(struct ieee80211_hw *hw, if (bitmask != MASKDWORD) { originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl92c_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((originalvalue & (~bitmask)) | (data << bitshift)); } @@ -143,14 +143,6 @@ void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw, } EXPORT_SYMBOL(_rtl92c_phy_rf_serial_write); -u32 _rtl92c_phy_calculate_bit_shift(u32 bitmask) -{ - u32 i = ffs(bitmask); - - return i ? i - 1 : 32; -} -EXPORT_SYMBOL(_rtl92c_phy_calculate_bit_shift); - static void _rtl92c_phy_bb_config_1t(struct ieee80211_hw *hw) { rtl_set_bbreg(hw, RFPGA0_TXINFO, 0x3, 0x2); diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.h index 75afa6253ad0..e64d377dfe9e 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.h +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192c/phy_common.h @@ -196,7 +196,6 @@ bool rtl92c_phy_set_rf_power_state(struct ieee80211_hw *hw, void rtl92ce_phy_set_rf_on(struct ieee80211_hw *hw); void rtl92c_phy_set_io(struct ieee80211_hw *hw); void rtl92c_bb_block_on(struct ieee80211_hw *hw); -u32 _rtl92c_phy_calculate_bit_shift(u32 bitmask); long _rtl92c_phy_txpwr_idx_to_dbm(struct ieee80211_hw *hw, enum wireless_mode wirelessmode, u8 txpwridx); From 016781c16e965f75d981ee2343f6c3674246b8a1 Mon Sep 17 00:00:00 2001 From: Su Hui Date: Tue, 19 Dec 2023 14:57:33 +0800 Subject: [PATCH 133/288] wifi: rtlwifi: rtl8192cu: using calculate_bit_shift() [ Upstream commit f4088c8fcbabadad9dd17d17ae9ba24e9e3221ec ] Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix an undefined bitwise shift behavior problem. Fixes: f0a39ae738d6 ("rtlwifi: rtl8192cu: Add routine phy") Signed-off-by: Su Hui Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-6-suhui@nfschina.com Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c index a8d9fe269f31..0b8cb7e61fd8 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192cu/phy.c @@ -32,7 +32,7 @@ u32 rtl92cu_phy_query_rf_reg(struct ieee80211_hw *hw, original_value = _rtl92c_phy_fw_rf_serial_read(hw, rfpath, regaddr); } - bitshift = _rtl92c_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); readback_value = (original_value & bitmask) >> bitshift; rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, "regaddr(%#x), rfpath(%#x), bitmask(%#x), original_value(%#x)\n", @@ -56,7 +56,7 @@ void rtl92cu_phy_set_rf_reg(struct ieee80211_hw *hw, original_value = _rtl92c_phy_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl92c_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((original_value & (~bitmask)) | (data << bitshift)); @@ -67,7 +67,7 @@ void rtl92cu_phy_set_rf_reg(struct ieee80211_hw *hw, original_value = _rtl92c_phy_fw_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl92c_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((original_value & (~bitmask)) | (data << bitshift)); From df14e43219975645f632a619a413b793e8616caa Mon Sep 17 00:00:00 2001 From: Su Hui Date: Tue, 19 Dec 2023 14:57:34 +0800 Subject: [PATCH 134/288] wifi: rtlwifi: rtl8192ce: using calculate_bit_shift() [ Upstream commit 3d03e8231031bcc65a48cd88ef9c71b6524ce70b ] Using calculate_bit_shift() to replace _rtl92c_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Signed-off-by: Su Hui Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-7-suhui@nfschina.com Signed-off-by: Sasha Levin --- drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c | 6 +++--- drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.h | 1 - 2 files changed, 3 insertions(+), 4 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c index 04735da11168..6b98e77768e9 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.c @@ -39,7 +39,7 @@ u32 rtl92c_phy_query_rf_reg(struct ieee80211_hw *hw, rfpath, regaddr); } - bitshift = _rtl92c_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); readback_value = (original_value & bitmask) >> bitshift; spin_unlock(&rtlpriv->locks.rf_lock); @@ -110,7 +110,7 @@ void rtl92ce_phy_set_rf_reg(struct ieee80211_hw *hw, original_value = _rtl92c_phy_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl92c_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((original_value & (~bitmask)) | (data << bitshift)); @@ -122,7 +122,7 @@ void rtl92ce_phy_set_rf_reg(struct ieee80211_hw *hw, original_value = _rtl92c_phy_fw_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl92c_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((original_value & (~bitmask)) | (data << bitshift)); diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.h b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.h index 7582a162bd11..c7a0d4c776f0 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.h +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ce/phy.h @@ -94,7 +94,6 @@ u32 _rtl92c_phy_rf_serial_read(struct ieee80211_hw *hw, enum radio_path rfpath, u32 offset); u32 _rtl92c_phy_fw_rf_serial_read(struct ieee80211_hw *hw, enum radio_path rfpath, u32 offset); -u32 _rtl92c_phy_calculate_bit_shift(u32 bitmask); void _rtl92c_phy_rf_serial_write(struct ieee80211_hw *hw, enum radio_path rfpath, u32 offset, u32 data); void _rtl92c_phy_fw_rf_serial_write(struct ieee80211_hw *hw, From b75b68dde5c1d31b9725a74ad7aede95d2432d19 Mon Sep 17 00:00:00 2001 From: Colin Ian King Date: Tue, 3 Aug 2021 15:49:48 +0100 Subject: [PATCH 135/288] rtlwifi: rtl8192de: make arrays static const, makes object smaller [ Upstream commit b05897ca8c821a16ac03850c4704fe460b3f21a0 ] Don't populate arrays the stack but instead make them static const. Replace array channel_info with channel_all since it contains the same data as channel_all. Makes object code smaller by 961 bytes. Before: text data bss dec hex filename 128147 44250 1024 173421 2a56d ../realtek/rtlwifi/rtl8192de/phy.o After text data bss dec hex filename 127122 44314 1024 172460 2a1ac ../realtek/rtlwifi/rtl8192de/phy.o (gcc version 10.2.0) Signed-off-by: Colin Ian King Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20210803144949.79433-2-colin.king@canonical.com Stable-dep-of: b8b2baad2e65 ("wifi: rtlwifi: rtl8192de: using calculate_bit_shift()") Signed-off-by: Sasha Levin --- .../wireless/realtek/rtlwifi/rtl8192de/phy.c | 48 ++++++++----------- 1 file changed, 20 insertions(+), 28 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c index d3027f8fbd38..f0692d67b300 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c @@ -160,6 +160,15 @@ static u32 targetchnl_2g[TARGET_CHNL_NUM_2G] = { 25711, 25658, 25606, 25554, 25502, 25451, 25328 }; +static const u8 channel_all[59] = { + 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, + 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, + 60, 62, 64, 100, 102, 104, 106, 108, 110, 112, + 114, 116, 118, 120, 122, 124, 126, 128, 130, + 132, 134, 136, 138, 140, 149, 151, 153, 155, + 157, 159, 161, 163, 165 +}; + static u32 _rtl92d_phy_calculate_bit_shift(u32 bitmask) { u32 i = ffs(bitmask); @@ -1354,14 +1363,6 @@ static void _rtl92d_phy_switch_rf_setting(struct ieee80211_hw *hw, u8 channel) u8 rtl92d_get_rightchnlplace_for_iqk(u8 chnl) { - u8 channel_all[59] = { - 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, - 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, 58, - 60, 62, 64, 100, 102, 104, 106, 108, 110, 112, - 114, 116, 118, 120, 122, 124, 126, 128, 130, - 132, 134, 136, 138, 140, 149, 151, 153, 155, - 157, 159, 161, 163, 165 - }; u8 place = chnl; if (chnl > 14) { @@ -3216,37 +3217,28 @@ void rtl92d_phy_config_macphymode_info(struct ieee80211_hw *hw) u8 rtl92d_get_chnlgroup_fromarray(u8 chnl) { u8 group; - u8 channel_info[59] = { - 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12, 13, 14, - 36, 38, 40, 42, 44, 46, 48, 50, 52, 54, 56, - 58, 60, 62, 64, 100, 102, 104, 106, 108, - 110, 112, 114, 116, 118, 120, 122, 124, - 126, 128, 130, 132, 134, 136, 138, 140, - 149, 151, 153, 155, 157, 159, 161, 163, - 165 - }; - if (channel_info[chnl] <= 3) + if (channel_all[chnl] <= 3) group = 0; - else if (channel_info[chnl] <= 9) + else if (channel_all[chnl] <= 9) group = 1; - else if (channel_info[chnl] <= 14) + else if (channel_all[chnl] <= 14) group = 2; - else if (channel_info[chnl] <= 44) + else if (channel_all[chnl] <= 44) group = 3; - else if (channel_info[chnl] <= 54) + else if (channel_all[chnl] <= 54) group = 4; - else if (channel_info[chnl] <= 64) + else if (channel_all[chnl] <= 64) group = 5; - else if (channel_info[chnl] <= 112) + else if (channel_all[chnl] <= 112) group = 6; - else if (channel_info[chnl] <= 126) + else if (channel_all[chnl] <= 126) group = 7; - else if (channel_info[chnl] <= 140) + else if (channel_all[chnl] <= 140) group = 8; - else if (channel_info[chnl] <= 153) + else if (channel_all[chnl] <= 153) group = 9; - else if (channel_info[chnl] <= 159) + else if (channel_all[chnl] <= 159) group = 10; else group = 11; From 99f56c3f7c564618afbf4bf7688d8dc882f72a8e Mon Sep 17 00:00:00 2001 From: Su Hui Date: Tue, 19 Dec 2023 14:57:35 +0800 Subject: [PATCH 136/288] wifi: rtlwifi: rtl8192de: using calculate_bit_shift() [ Upstream commit b8b2baad2e652042cf8b6339939ac2f4e6f53de4 ] Using calculate_bit_shift() to replace _rtl92d_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: 7274a8c22980 ("rtlwifi: rtl8192de: Merge phy routines") Signed-off-by: Su Hui Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-8-suhui@nfschina.com Signed-off-by: Sasha Levin --- .../net/wireless/realtek/rtlwifi/rtl8192de/phy.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c index f0692d67b300..af0c7d74b3f5 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192de/phy.c @@ -169,13 +169,6 @@ static const u8 channel_all[59] = { 157, 159, 161, 163, 165 }; -static u32 _rtl92d_phy_calculate_bit_shift(u32 bitmask) -{ - u32 i = ffs(bitmask); - - return i ? i - 1 : 32; -} - u32 rtl92d_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -198,7 +191,7 @@ u32 rtl92d_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) } else { originalvalue = rtl_read_dword(rtlpriv, regaddr); } - bitshift = _rtl92d_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); returnvalue = (originalvalue & bitmask) >> bitshift; rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, "BBR MASK=0x%x Addr[0x%x]=0x%x\n", @@ -230,7 +223,7 @@ void rtl92d_phy_set_bb_reg(struct ieee80211_hw *hw, dbi_direct); else originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl92d_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((originalvalue & (~bitmask)) | (data << bitshift)); } if (rtlhal->during_mac1init_radioa || rtlhal->during_mac0init_radiob) @@ -317,7 +310,7 @@ u32 rtl92d_phy_query_rf_reg(struct ieee80211_hw *hw, regaddr, rfpath, bitmask); spin_lock(&rtlpriv->locks.rf_lock); original_value = _rtl92d_phy_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl92d_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); readback_value = (original_value & bitmask) >> bitshift; spin_unlock(&rtlpriv->locks.rf_lock); rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, @@ -343,7 +336,7 @@ void rtl92d_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, if (bitmask != RFREG_OFFSET_MASK) { original_value = _rtl92d_phy_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl92d_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((original_value & (~bitmask)) | (data << bitshift)); } From c7138266538e7044068808d4024e7d0963d7cdcd Mon Sep 17 00:00:00 2001 From: Su Hui Date: Tue, 19 Dec 2023 14:57:36 +0800 Subject: [PATCH 137/288] wifi: rtlwifi: rtl8192ee: using calculate_bit_shift() [ Upstream commit 63526897fc0d086069bcab67c3a112caaec751cb ] Using calculate_bit_shift() to replace _rtl92ee_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: b1a3bfc97cd9 ("rtlwifi: rtl8192ee: Move driver from staging to the regular tree") Signed-off-by: Su Hui Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-9-suhui@nfschina.com Signed-off-by: Sasha Levin --- .../net/wireless/realtek/rtlwifi/rtl8192ee/phy.c | 16 ++++------------ 1 file changed, 4 insertions(+), 12 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c index cc0bcaf13e96..73ef602bfb01 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192ee/phy.c @@ -16,7 +16,6 @@ static u32 _rtl92ee_phy_rf_serial_read(struct ieee80211_hw *hw, static void _rtl92ee_phy_rf_serial_write(struct ieee80211_hw *hw, enum radio_path rfpath, u32 offset, u32 data); -static u32 _rtl92ee_phy_calculate_bit_shift(u32 bitmask); static bool _rtl92ee_phy_bb8192ee_config_parafile(struct ieee80211_hw *hw); static bool _rtl92ee_phy_config_mac_with_headerfile(struct ieee80211_hw *hw); static bool phy_config_bb_with_hdr_file(struct ieee80211_hw *hw, @@ -46,7 +45,7 @@ u32 rtl92ee_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, "regaddr(%#x), bitmask(%#x)\n", regaddr, bitmask); originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl92ee_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); returnvalue = (originalvalue & bitmask) >> bitshift; rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, @@ -68,7 +67,7 @@ void rtl92ee_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, if (bitmask != MASKDWORD) { originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl92ee_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((originalvalue & (~bitmask)) | (data << bitshift)); } @@ -92,7 +91,7 @@ u32 rtl92ee_phy_query_rf_reg(struct ieee80211_hw *hw, spin_lock(&rtlpriv->locks.rf_lock); original_value = _rtl92ee_phy_rf_serial_read(hw , rfpath, regaddr); - bitshift = _rtl92ee_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); readback_value = (original_value & bitmask) >> bitshift; spin_unlock(&rtlpriv->locks.rf_lock); @@ -119,7 +118,7 @@ void rtl92ee_phy_set_rf_reg(struct ieee80211_hw *hw, if (bitmask != RFREG_OFFSET_MASK) { original_value = _rtl92ee_phy_rf_serial_read(hw, rfpath, addr); - bitshift = _rtl92ee_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = (original_value & (~bitmask)) | (data << bitshift); } @@ -201,13 +200,6 @@ static void _rtl92ee_phy_rf_serial_write(struct ieee80211_hw *hw, pphyreg->rf3wire_offset, data_and_addr); } -static u32 _rtl92ee_phy_calculate_bit_shift(u32 bitmask) -{ - u32 i = ffs(bitmask); - - return i ? i - 1 : 32; -} - bool rtl92ee_phy_mac_config(struct ieee80211_hw *hw) { return _rtl92ee_phy_config_mac_with_headerfile(hw); From 6f39bea6629a7f176a9a1d85116564c88184017c Mon Sep 17 00:00:00 2001 From: Su Hui Date: Tue, 19 Dec 2023 14:57:37 +0800 Subject: [PATCH 138/288] wifi: rtlwifi: rtl8192se: using calculate_bit_shift() [ Upstream commit ac32b9317063b101a8ff3d3e885f76f87a280419 ] Using calculate_bit_shift() to replace _rtl92s_phy_calculate_bit_shift(). And fix the undefined bitwise shift behavior problem. Fixes: d15853163bea ("rtlwifi: rtl8192se: Merge phy routines") Signed-off-by: Su Hui Signed-off-by: Kalle Valo Link: https://msgid.link/20231219065739.1895666-10-suhui@nfschina.com Signed-off-by: Sasha Levin --- .../net/wireless/realtek/rtlwifi/rtl8192se/phy.c | 15 ++++----------- 1 file changed, 4 insertions(+), 11 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c index 63283d9e7485..cd735d61f630 100644 --- a/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c +++ b/drivers/net/wireless/realtek/rtlwifi/rtl8192se/phy.c @@ -14,13 +14,6 @@ #include "hw.h" #include "table.h" -static u32 _rtl92s_phy_calculate_bit_shift(u32 bitmask) -{ - u32 i = ffs(bitmask); - - return i ? i - 1 : 32; -} - u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) { struct rtl_priv *rtlpriv = rtl_priv(hw); @@ -30,7 +23,7 @@ u32 rtl92s_phy_query_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask) regaddr, bitmask); originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); returnvalue = (originalvalue & bitmask) >> bitshift; rtl_dbg(rtlpriv, COMP_RF, DBG_TRACE, "BBR MASK=0x%x Addr[0x%x]=0x%x\n", @@ -52,7 +45,7 @@ void rtl92s_phy_set_bb_reg(struct ieee80211_hw *hw, u32 regaddr, u32 bitmask, if (bitmask != MASKDWORD) { originalvalue = rtl_read_dword(rtlpriv, regaddr); - bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((originalvalue & (~bitmask)) | (data << bitshift)); } @@ -160,7 +153,7 @@ u32 rtl92s_phy_query_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); readback_value = (original_value & bitmask) >> bitshift; spin_unlock(&rtlpriv->locks.rf_lock); @@ -191,7 +184,7 @@ void rtl92s_phy_set_rf_reg(struct ieee80211_hw *hw, enum radio_path rfpath, if (bitmask != RFREG_OFFSET_MASK) { original_value = _rtl92s_phy_rf_serial_read(hw, rfpath, regaddr); - bitshift = _rtl92s_phy_calculate_bit_shift(bitmask); + bitshift = calculate_bit_shift(bitmask); data = ((original_value & (~bitmask)) | (data << bitshift)); } From 15be96e1a6287a5d414d9a05fa2340936754baab Mon Sep 17 00:00:00 2001 From: Florian Westphal Date: Mon, 27 Nov 2023 11:00:37 +0100 Subject: [PATCH 139/288] netfilter: nf_tables: mark newset as dead on transaction abort [ Upstream commit 08e4c8c5919fd405a4d709b4ba43d836894a26eb ] If a transaction is aborted, we should mark the to-be-released NEWSET dead, just like commit path does for DEL and DESTROYSET commands. In both cases all remaining elements will be released via set->ops->destroy(). The existing abort code does NOT post the actual release to the work queue. Also the entire __nf_tables_abort() function is wrapped in gc_seq begin/end pair. Therefore, async gc worker will never try to release the pending set elements, as gc sequence is always stale. It might be possible to speed up transaction aborts via work queue too, this would result in a race and a possible use-after-free. So fix this before it becomes an issue. Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Florian Westphal Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 1 + 1 file changed, 1 insertion(+) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 4d1a009dab45..6e91c743a4d4 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -8840,6 +8840,7 @@ static int __nf_tables_abort(struct net *net, enum nfnl_abort_action action) nft_trans_destroy(trans); break; } + nft_trans_set(trans)->dead = 1; list_del_rcu(&nft_trans_set(trans)->list); break; case NFT_MSG_DELSET: From fd54d16613cf93fb0a98c0e2ddd3c887f1f15045 Mon Sep 17 00:00:00 2001 From: Luiz Augusto von Dentz Date: Thu, 30 Nov 2023 14:58:03 +0100 Subject: [PATCH 140/288] Bluetooth: Fix bogus check for re-auth no supported with non-ssp [ Upstream commit d03376c185926098cb4d668d6458801eb785c0a5 ] This reverts 19f8def031bfa50c579149b200bfeeb919727b27 "Bluetooth: Fix auth_complete_evt for legacy units" which seems to be working around a bug on a broken controller rather then any limitation imposed by the Bluetooth spec, in fact if there ws not possible to re-auth the command shall fail not succeed. Fixes: 19f8def031bf ("Bluetooth: Fix auth_complete_evt for legacy units") Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin --- include/net/bluetooth/hci_core.h | 1 - net/bluetooth/hci_conn.c | 8 +++----- net/bluetooth/hci_event.c | 11 ++--------- 3 files changed, 5 insertions(+), 15 deletions(-) diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index a168a64696b6..33873266b2bc 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -819,7 +819,6 @@ void hci_inquiry_cache_flush(struct hci_dev *hdev); /* ----- HCI Connections ----- */ enum { HCI_CONN_AUTH_PEND, - HCI_CONN_REAUTH_PEND, HCI_CONN_ENCRYPT_PEND, HCI_CONN_RSWITCH_PEND, HCI_CONN_MODE_CHANGE_PEND, diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 74721c3e49b3..52e512f41da3 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -1385,12 +1385,10 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type) hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED, sizeof(cp), &cp); - /* If we're already encrypted set the REAUTH_PEND flag, - * otherwise set the ENCRYPT_PEND. + /* Set the ENCRYPT_PEND to trigger encryption after + * authentication. */ - if (test_bit(HCI_CONN_ENCRYPT, &conn->flags)) - set_bit(HCI_CONN_REAUTH_PEND, &conn->flags); - else + if (!test_bit(HCI_CONN_ENCRYPT, &conn->flags)) set_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags); } diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c index ee2c1a17366a..4027c79786fd 100644 --- a/net/bluetooth/hci_event.c +++ b/net/bluetooth/hci_event.c @@ -2924,14 +2924,8 @@ static void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) if (!ev->status) { clear_bit(HCI_CONN_AUTH_FAILURE, &conn->flags); - - if (!hci_conn_ssp_enabled(conn) && - test_bit(HCI_CONN_REAUTH_PEND, &conn->flags)) { - bt_dev_info(hdev, "re-auth of legacy device is not possible."); - } else { - set_bit(HCI_CONN_AUTH, &conn->flags); - conn->sec_level = conn->pending_sec_level; - } + set_bit(HCI_CONN_AUTH, &conn->flags); + conn->sec_level = conn->pending_sec_level; } else { if (ev->status == HCI_ERROR_PIN_OR_KEY_MISSING) set_bit(HCI_CONN_AUTH_FAILURE, &conn->flags); @@ -2940,7 +2934,6 @@ static void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *skb) } clear_bit(HCI_CONN_AUTH_PEND, &conn->flags); - clear_bit(HCI_CONN_REAUTH_PEND, &conn->flags); if (conn->state == BT_CONFIG) { if (!ev->status && hci_conn_ssp_enabled(conn)) { From 4e09df9b24b17288341832e3135ed1b35c7a2397 Mon Sep 17 00:00:00 2001 From: Francesco Dolcini Date: Mon, 11 Dec 2023 17:40:19 +0100 Subject: [PATCH 141/288] Bluetooth: btmtkuart: fix recv_buf() return value [ Upstream commit 64057f051f20c2a2184b9db7f8037d928d68a4f4 ] Serdev recv_buf() callback is supposed to return the amount of bytes consumed, therefore an int in between 0 and count. Do not return negative number in case of issue, just print an error and return count. This fixes a WARN in ttyport_receive_buf(). Link: https://lore.kernel.org/all/087be419-ec6b-47ad-851a-5e1e3ea5cfcc@kernel.org/ Fixes: 7237c4c9ec92 ("Bluetooth: mediatek: Add protocol support for MediaTek serial devices") Signed-off-by: Francesco Dolcini Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Sasha Levin --- drivers/bluetooth/btmtkuart.c | 11 +++-------- 1 file changed, 3 insertions(+), 8 deletions(-) diff --git a/drivers/bluetooth/btmtkuart.c b/drivers/bluetooth/btmtkuart.c index 719d4685a2dd..1a908827b1f2 100644 --- a/drivers/bluetooth/btmtkuart.c +++ b/drivers/bluetooth/btmtkuart.c @@ -471,7 +471,7 @@ mtk_stp_split(struct btmtkuart_dev *bdev, const unsigned char *data, int count, return data; } -static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count) +static void btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count) { struct btmtkuart_dev *bdev = hci_get_drvdata(hdev); const unsigned char *p_left = data, *p_h4; @@ -510,25 +510,20 @@ static int btmtkuart_recv(struct hci_dev *hdev, const u8 *data, size_t count) bt_dev_err(bdev->hdev, "Frame reassembly failed (%d)", err); bdev->rx_skb = NULL; - return err; + return; } sz_left -= sz_h4; p_left += sz_h4; } - - return 0; } static int btmtkuart_receive_buf(struct serdev_device *serdev, const u8 *data, size_t count) { struct btmtkuart_dev *bdev = serdev_device_get_drvdata(serdev); - int err; - err = btmtkuart_recv(bdev->hdev, data, count); - if (err < 0) - return err; + btmtkuart_recv(bdev->hdev, data, count); bdev->hdev->stat.byte_rx += count; From da23bd709b46168f7dfc36055801011222b076cd Mon Sep 17 00:00:00 2001 From: Eric Dumazet Date: Fri, 5 Jan 2024 17:03:13 +0000 Subject: [PATCH 142/288] ip6_tunnel: fix NEXTHDR_FRAGMENT handling in ip6_tnl_parse_tlv_enc_lim() [ Upstream commit d375b98e0248980681e5e56b712026174d617198 ] syzbot pointed out [1] that NEXTHDR_FRAGMENT handling is broken. Reading frag_off can only be done if we pulled enough bytes to skb->head. Currently we might access garbage. [1] BUG: KMSAN: uninit-value in ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0 ip6_tnl_parse_tlv_enc_lim+0x94f/0xbb0 ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline] ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137 ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:451 [inline] ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155 ip6_send_skb net/ipv6/ip6_output.c:1952 [inline] ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972 rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582 rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920 inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b Uninit was created at: slab_post_alloc_hook+0x129/0xa70 mm/slab.h:768 slab_alloc_node mm/slub.c:3478 [inline] __kmem_cache_alloc_node+0x5c9/0x970 mm/slub.c:3517 __do_kmalloc_node mm/slab_common.c:1006 [inline] __kmalloc_node_track_caller+0x118/0x3c0 mm/slab_common.c:1027 kmalloc_reserve+0x249/0x4a0 net/core/skbuff.c:582 pskb_expand_head+0x226/0x1a00 net/core/skbuff.c:2098 __pskb_pull_tail+0x13b/0x2310 net/core/skbuff.c:2655 pskb_may_pull_reason include/linux/skbuff.h:2673 [inline] pskb_may_pull include/linux/skbuff.h:2681 [inline] ip6_tnl_parse_tlv_enc_lim+0x901/0xbb0 net/ipv6/ip6_tunnel.c:408 ipxip6_tnl_xmit net/ipv6/ip6_tunnel.c:1326 [inline] ip6_tnl_start_xmit+0xab2/0x1a70 net/ipv6/ip6_tunnel.c:1432 __netdev_start_xmit include/linux/netdevice.h:4940 [inline] netdev_start_xmit include/linux/netdevice.h:4954 [inline] xmit_one net/core/dev.c:3548 [inline] dev_hard_start_xmit+0x247/0xa10 net/core/dev.c:3564 __dev_queue_xmit+0x33b8/0x5130 net/core/dev.c:4349 dev_queue_xmit include/linux/netdevice.h:3134 [inline] neigh_connected_output+0x569/0x660 net/core/neighbour.c:1592 neigh_output include/net/neighbour.h:542 [inline] ip6_finish_output2+0x23a9/0x2b30 net/ipv6/ip6_output.c:137 ip6_finish_output+0x855/0x12b0 net/ipv6/ip6_output.c:222 NF_HOOK_COND include/linux/netfilter.h:303 [inline] ip6_output+0x323/0x610 net/ipv6/ip6_output.c:243 dst_output include/net/dst.h:451 [inline] ip6_local_out+0xe9/0x140 net/ipv6/output_core.c:155 ip6_send_skb net/ipv6/ip6_output.c:1952 [inline] ip6_push_pending_frames+0x1f9/0x560 net/ipv6/ip6_output.c:1972 rawv6_push_pending_frames+0xbe8/0xdf0 net/ipv6/raw.c:582 rawv6_sendmsg+0x2b66/0x2e70 net/ipv6/raw.c:920 inet_sendmsg+0x105/0x190 net/ipv4/af_inet.c:847 sock_sendmsg_nosec net/socket.c:730 [inline] __sock_sendmsg net/socket.c:745 [inline] ____sys_sendmsg+0x9c2/0xd60 net/socket.c:2584 ___sys_sendmsg+0x28d/0x3c0 net/socket.c:2638 __sys_sendmsg net/socket.c:2667 [inline] __do_sys_sendmsg net/socket.c:2676 [inline] __se_sys_sendmsg net/socket.c:2674 [inline] __x64_sys_sendmsg+0x307/0x490 net/socket.c:2674 do_syscall_x64 arch/x86/entry/common.c:52 [inline] do_syscall_64+0x44/0x110 arch/x86/entry/common.c:83 entry_SYSCALL_64_after_hwframe+0x63/0x6b CPU: 0 PID: 7345 Comm: syz-executor.3 Not tainted 6.7.0-rc8-syzkaller-00024-gac865f00af29 #0 Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 11/17/2023 Fixes: fbfa743a9d2a ("ipv6: fix ip6_tnl_parse_tlv_enc_lim()") Reported-by: syzbot Signed-off-by: Eric Dumazet Cc: Willem de Bruijn Reviewed-by: Willem de Bruijn Reviewed-by: David Ahern Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- net/ipv6/ip6_tunnel.c | 26 +++++++++++++------------- 1 file changed, 13 insertions(+), 13 deletions(-) diff --git a/net/ipv6/ip6_tunnel.c b/net/ipv6/ip6_tunnel.c index a03a322e0cc1..edf4a842506f 100644 --- a/net/ipv6/ip6_tunnel.c +++ b/net/ipv6/ip6_tunnel.c @@ -427,7 +427,7 @@ __u16 ip6_tnl_parse_tlv_enc_lim(struct sk_buff *skb, __u8 *raw) const struct ipv6hdr *ipv6h = (const struct ipv6hdr *)raw; unsigned int nhoff = raw - skb->data; unsigned int off = nhoff + sizeof(*ipv6h); - u8 next, nexthdr = ipv6h->nexthdr; + u8 nexthdr = ipv6h->nexthdr; while (ipv6_ext_hdr(nexthdr) && nexthdr != NEXTHDR_NONE) { struct ipv6_opt_hdr *hdr; @@ -438,26 +438,26 @@ __u16 ip6_tnl_parse_tlv_enc_lim(struct sk_buff *skb, __u8 *raw) hdr = (struct ipv6_opt_hdr *)(skb->data + off); if (nexthdr == NEXTHDR_FRAGMENT) { - struct frag_hdr *frag_hdr = (struct frag_hdr *) hdr; - if (frag_hdr->frag_off) - break; optlen = 8; } else if (nexthdr == NEXTHDR_AUTH) { optlen = ipv6_authlen(hdr); } else { optlen = ipv6_optlen(hdr); } - /* cache hdr->nexthdr, since pskb_may_pull() might - * invalidate hdr - */ - next = hdr->nexthdr; + + if (!pskb_may_pull(skb, off + optlen)) + break; + + hdr = (struct ipv6_opt_hdr *)(skb->data + off); + if (nexthdr == NEXTHDR_FRAGMENT) { + struct frag_hdr *frag_hdr = (struct frag_hdr *)hdr; + + if (frag_hdr->frag_off) + break; + } if (nexthdr == NEXTHDR_DEST) { u16 i = 2; - /* Remember : hdr is no longer valid at this point. */ - if (!pskb_may_pull(skb, off + optlen)) - break; - while (1) { struct ipv6_tlv_tnl_enc_lim *tel; @@ -477,7 +477,7 @@ __u16 ip6_tnl_parse_tlv_enc_lim(struct sk_buff *skb, __u8 *raw) i++; } } - nexthdr = next; + nexthdr = hdr->nexthdr; off += optlen; } return 0; From d807f4ef22deaa6533230dd806807caccb2e671a Mon Sep 17 00:00:00 2001 From: Arnd Bergmann Date: Mon, 8 Jan 2024 12:00:36 +0100 Subject: [PATCH 143/288] ARM: davinci: always select CONFIG_CPU_ARM926T [ Upstream commit 40974ee421b4d1fc74ac733d86899ce1b83d8f65 ] The select was lost by accident during the multiplatform conversion. Any davinci-only arm-linux-gnueabi-ld: arch/arm/mach-davinci/sleep.o: in function `CACHE_FLUSH': (.text+0x168): undefined reference to `arm926_flush_kern_cache_all' Fixes: f962396ce292 ("ARM: davinci: support multiplatform build for ARM v5") Acked-by: Bartosz Golaszewski Link: https://lore.kernel.org/r/20240108110055.1531153-1-arnd@kernel.org Signed-off-by: Arnd Bergmann Signed-off-by: Sasha Levin --- arch/arm/mach-davinci/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig index de11030748d0..b30221f7dfa4 100644 --- a/arch/arm/mach-davinci/Kconfig +++ b/arch/arm/mach-davinci/Kconfig @@ -3,6 +3,7 @@ menuconfig ARCH_DAVINCI bool "TI DaVinci" depends on ARCH_MULTI_V5 + select CPU_ARM926T select DAVINCI_TIMER select ZONE_DMA select PM_GENERIC_DOMAINS if PM From 7794c14812330106b0e50227925f42177f4b68a5 Mon Sep 17 00:00:00 2001 From: Leon Romanovsky Date: Mon, 13 Nov 2023 11:28:02 +0200 Subject: [PATCH 144/288] RDMA/usnic: Silence uninitialized symbol smatch warnings [ Upstream commit b9a85e5eec126d6ae6c362f94b447c223e8fe6e4 ] The patch 1da177e4c3f4: "Linux-2.6.12-rc2" from Apr 16, 2005 (linux-next), leads to the following Smatch static checker warning: drivers/infiniband/hw/mthca/mthca_cmd.c:644 mthca_SYS_EN() error: uninitialized symbol 'out'. drivers/infiniband/hw/mthca/mthca_cmd.c 636 int mthca_SYS_EN(struct mthca_dev *dev) 637 { 638 u64 out; 639 int ret; 640 641 ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D); We pass out here and it gets used without being initialized. err = mthca_cmd_post(dev, in_param, out_param ? *out_param : 0, ^^^^^^^^^^ in_modifier, op_modifier, op, context->token, 1); It's the same in mthca_cmd_wait() and mthca_cmd_poll(). Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2") Reported-by: Dan Carpenter Closes: https://lore.kernel.org/all/533bc3df-8078-4397-b93d-d1f6cec9b636@moroto.mountain Link: https://lore.kernel.org/r/c559cb7113158c02d75401ac162652072ef1b5f0.1699867650.git.leon@kernel.org Signed-off-by: Leon Romanovsky Signed-off-by: Sasha Levin --- drivers/infiniband/hw/mthca/mthca_cmd.c | 4 ++-- drivers/infiniband/hw/mthca/mthca_main.c | 2 +- 2 files changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/infiniband/hw/mthca/mthca_cmd.c b/drivers/infiniband/hw/mthca/mthca_cmd.c index bdf5ed38de22..0307c45aa6d3 100644 --- a/drivers/infiniband/hw/mthca/mthca_cmd.c +++ b/drivers/infiniband/hw/mthca/mthca_cmd.c @@ -635,7 +635,7 @@ void mthca_free_mailbox(struct mthca_dev *dev, struct mthca_mailbox *mailbox) int mthca_SYS_EN(struct mthca_dev *dev) { - u64 out; + u64 out = 0; int ret; ret = mthca_cmd_imm(dev, 0, &out, 0, 0, CMD_SYS_EN, CMD_TIME_CLASS_D); @@ -1955,7 +1955,7 @@ int mthca_WRITE_MGM(struct mthca_dev *dev, int index, int mthca_MGID_HASH(struct mthca_dev *dev, struct mthca_mailbox *mailbox, u16 *hash) { - u64 imm; + u64 imm = 0; int err; err = mthca_cmd_imm(dev, mailbox->dma, &imm, 0, 0, CMD_MGID_HASH, diff --git a/drivers/infiniband/hw/mthca/mthca_main.c b/drivers/infiniband/hw/mthca/mthca_main.c index fe9654a7af71..3acd1372c814 100644 --- a/drivers/infiniband/hw/mthca/mthca_main.c +++ b/drivers/infiniband/hw/mthca/mthca_main.c @@ -382,7 +382,7 @@ static int mthca_init_icm(struct mthca_dev *mdev, struct mthca_init_hca_param *init_hca, u64 icm_size) { - u64 aux_pages; + u64 aux_pages = 0; int err; err = mthca_SET_ICM_SIZE(mdev, icm_size, &aux_pages); From 1d1d5b90ea01c25bb8318a4667eefc77b628e609 Mon Sep 17 00:00:00 2001 From: Chris Morgan Date: Fri, 17 Nov 2023 13:44:02 -0600 Subject: [PATCH 145/288] drm/panel-elida-kd35t133: hold panel in reset for unprepare [ Upstream commit 03c5b2a5f6c39fe4e090346536cf1c14ee18b61e ] For devices like the Anbernic RG351M and RG351P the panel is wired to an always on regulator. When the device suspends and wakes up, there are some slight artifacts on the screen that go away over time. If instead we hold the panel in reset status after it is unprepared, this does not happen. Fixes: 5b6603360c12 ("drm/panel: add panel driver for Elida KD35T133 panels") Signed-off-by: Chris Morgan Reviewed-by: Jessica Zhang Link: https://lore.kernel.org/r/20231117194405.1386265-3-macroalpha82@gmail.com Signed-off-by: Neil Armstrong Link: https://patchwork.freedesktop.org/patch/msgid/20231117194405.1386265-3-macroalpha82@gmail.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/panel/panel-elida-kd35t133.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/gpu/drm/panel/panel-elida-kd35t133.c b/drivers/gpu/drm/panel/panel-elida-kd35t133.c index fe5ac3ef9018..9c1591f2920c 100644 --- a/drivers/gpu/drm/panel/panel-elida-kd35t133.c +++ b/drivers/gpu/drm/panel/panel-elida-kd35t133.c @@ -111,6 +111,8 @@ static int kd35t133_unprepare(struct drm_panel *panel) return ret; } + gpiod_set_value_cansleep(ctx->reset_gpio, 1); + regulator_disable(ctx->iovcc); regulator_disable(ctx->vdd); From b1a07165be21ad9ab925ff0615bf991f47dcee00 Mon Sep 17 00:00:00 2001 From: "Paul E. McKenney" Date: Thu, 24 Jun 2021 18:05:51 +0200 Subject: [PATCH 146/288] rcu: Create an unrcu_pointer() to remove __rcu from a pointer MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 76c8eaafe4f061f3790112842a2fbb297e4bea88 ] The xchg() and cmpxchg() functions are sometimes used to carry out RCU updates. Unfortunately, this can result in sparse warnings for both the old-value and new-value arguments, as well as for the return value. The arguments can be dealt with using RCU_INITIALIZER(): old_p = xchg(&p, RCU_INITIALIZER(new_p)); But a sparse warning still remains due to assigning the __rcu pointer returned from xchg to the (most likely) non-__rcu pointer old_p. This commit therefore provides an unrcu_pointer() macro that strips the __rcu. This macro can be used as follows: old_p = unrcu_pointer(xchg(&p, RCU_INITIALIZER(new_p))); Reported-by: Toke Høiland-Jørgensen Signed-off-by: Paul E. McKenney Stable-dep-of: 5f35a624c1e3 ("drm/nouveau/fence:: fix warning directly dereferencing a rcu pointer") Signed-off-by: Sasha Levin --- include/linux/rcupdate.h | 14 ++++++++++++++ 1 file changed, 14 insertions(+) diff --git a/include/linux/rcupdate.h b/include/linux/rcupdate.h index ef8d56b18da6..8716a1706351 100644 --- a/include/linux/rcupdate.h +++ b/include/linux/rcupdate.h @@ -366,6 +366,20 @@ static inline void rcu_preempt_sleep_check(void) { } #define rcu_check_sparse(p, space) #endif /* #else #ifdef __CHECKER__ */ +/** + * unrcu_pointer - mark a pointer as not being RCU protected + * @p: pointer needing to lose its __rcu property + * + * Converts @p from an __rcu pointer to a __kernel pointer. + * This allows an __rcu pointer to be used with xchg() and friends. + */ +#define unrcu_pointer(p) \ +({ \ + typeof(*p) *_________p1 = (typeof(*p) *__force)(p); \ + rcu_check_sparse(p, __rcu); \ + ((typeof(*p) __force __kernel *)(_________p1)); \ +}) + #define __rcu_access_pointer(p, space) \ ({ \ typeof(*p) *_________p1 = (typeof(*p) *__force)READ_ONCE(p); \ From 1eb7ceae48874b98e762854785da648b38c40cb5 Mon Sep 17 00:00:00 2001 From: Abhinav Singh Date: Tue, 14 Nov 2023 00:43:03 +0530 Subject: [PATCH 147/288] drm/nouveau/fence:: fix warning directly dereferencing a rcu pointer [ Upstream commit 5f35a624c1e30b5bae5023b3c256e94e0ad4f806 ] Fix a sparse warning with this message "warning:dereference of noderef expression". In this context it means we are dereferencing a __rcu tagged pointer directly. We should not be directly dereferencing a rcu pointer. To get a normal (non __rcu tagged pointer) from a __rcu tagged pointer we are using the function unrcu_pointer(...). The non __rcu tagged pointer then can be dereferenced just like a normal pointer. I tested with qemu with this command qemu-system-x86_64 \ -m 2G \ -smp 2 \ -kernel bzImage \ -append "console=ttyS0 root=/dev/sda earlyprintk=serial net.ifnames=0" \ -drive file=bullseye.img,format=raw \ -net user,host=10.0.2.10,hostfwd=tcp:127.0.0.1:10021-:22 \ -net nic,model=e1000 \ -enable-kvm \ -nographic \ -pidfile vm.pid \ 2>&1 | tee vm.log with lockdep enabled. Fixes: 0ec5f02f0e2c ("drm/nouveau: prevent stale fence->channel pointers, and protect with rcu") Signed-off-by: Abhinav Singh Signed-off-by: Danilo Krummrich Link: https://patchwork.freedesktop.org/patch/msgid/20231113191303.3277733-1-singhabhinav9051571833@gmail.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/nouveau/nv04_fence.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/nouveau/nv04_fence.c b/drivers/gpu/drm/nouveau/nv04_fence.c index 5b71a5a5cd85..cdbc75e3d1f6 100644 --- a/drivers/gpu/drm/nouveau/nv04_fence.c +++ b/drivers/gpu/drm/nouveau/nv04_fence.c @@ -39,7 +39,7 @@ struct nv04_fence_priv { static int nv04_fence_emit(struct nouveau_fence *fence) { - struct nvif_push *push = fence->channel->chan.push; + struct nvif_push *push = unrcu_pointer(fence->channel)->chan.push; int ret = PUSH_WAIT(push, 2); if (ret == 0) { PUSH_NVSQ(push, NV_SW, 0x0150, fence->base.seqno); From 53926e2a39629702f7f809d614b3ca89c2478205 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Thu, 2 Nov 2023 17:56:42 +0100 Subject: [PATCH 148/288] drm/bridge: tpd12s015: Drop buggy __exit annotation for remove function MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit ce3e112e7ae854249d8755906acc5f27e1542114 ] With tpd12s015_remove() marked with __exit this function is discarded when the driver is compiled as a built-in. The result is that when the driver unbinds there is no cleanup done which results in resource leakage or worse. Fixes: cff5e6f7e83f ("drm/bridge: Add driver for the TI TPD12S015 HDMI level shifter") Signed-off-by: Uwe Kleine-König Signed-off-by: Thomas Zimmermann Link: https://patchwork.freedesktop.org/patch/msgid/20231102165640.3307820-19-u.kleine-koenig@pengutronix.de Signed-off-by: Sasha Levin --- drivers/gpu/drm/bridge/ti-tpd12s015.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/bridge/ti-tpd12s015.c b/drivers/gpu/drm/bridge/ti-tpd12s015.c index e0e015243a60..b588fea12502 100644 --- a/drivers/gpu/drm/bridge/ti-tpd12s015.c +++ b/drivers/gpu/drm/bridge/ti-tpd12s015.c @@ -179,7 +179,7 @@ static int tpd12s015_probe(struct platform_device *pdev) return 0; } -static int __exit tpd12s015_remove(struct platform_device *pdev) +static int tpd12s015_remove(struct platform_device *pdev) { struct tpd12s015_device *tpd = platform_get_drvdata(pdev); @@ -197,7 +197,7 @@ MODULE_DEVICE_TABLE(of, tpd12s015_of_match); static struct platform_driver tpd12s015_driver = { .probe = tpd12s015_probe, - .remove = __exit_p(tpd12s015_remove), + .remove = tpd12s015_remove, .driver = { .name = "tpd12s015", .of_match_table = tpd12s015_of_match, From 3233d8bf7893550045682192cb227af7fa3defeb Mon Sep 17 00:00:00 2001 From: "Ricardo B. Marliere" Date: Fri, 13 Oct 2023 01:09:12 +0200 Subject: [PATCH 149/288] media: pvrusb2: fix use after free on context disconnection [ Upstream commit ded85b0c0edd8f45fec88783d7555a5b982449c1 ] Upon module load, a kthread is created targeting the pvr2_context_thread_func function, which may call pvr2_context_destroy and thus call kfree() on the context object. However, that might happen before the usb hub_event handler is able to notify the driver. This patch adds a sanity check before the invalid read reported by syzbot, within the context disconnection call stack. Reported-and-tested-by: syzbot+621409285c4156a009b3@syzkaller.appspotmail.com Closes: https://lore.kernel.org/all/000000000000a02a4205fff8eb92@google.com/ Fixes: e5be15c63804 ("V4L/DVB (7711): pvrusb2: Fix race on module unload") Signed-off-by: Ricardo B. Marliere Acked-by: Mike Isely Signed-off-by: Hans Verkuil Signed-off-by: Mauro Carvalho Chehab Signed-off-by: Sasha Levin --- drivers/media/usb/pvrusb2/pvrusb2-context.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/media/usb/pvrusb2/pvrusb2-context.c b/drivers/media/usb/pvrusb2/pvrusb2-context.c index 14170a5d72b3..1764674de98b 100644 --- a/drivers/media/usb/pvrusb2/pvrusb2-context.c +++ b/drivers/media/usb/pvrusb2/pvrusb2-context.c @@ -268,7 +268,8 @@ void pvr2_context_disconnect(struct pvr2_context *mp) { pvr2_hdw_disconnect(mp->hdw); mp->disconnect_flag = !0; - pvr2_context_notify(mp); + if (!pvr2_context_shutok()) + pvr2_context_notify(mp); } From 13ea8af95768ea8d3b5c87f8393bbb7cc31698f6 Mon Sep 17 00:00:00 2001 From: Dario Binacchi Date: Fri, 24 Nov 2023 10:42:30 +0100 Subject: [PATCH 150/288] drm/bridge: Fix typo in post_disable() description [ Upstream commit 288b039db225676e0c520c981a1b5a2562d893a3 ] s/singals/signals/ Fixes: 199e4e967af4 ("drm: Extract drm_bridge.h") Signed-off-by: Dario Binacchi Signed-off-by: Robert Foss Link: https://patchwork.freedesktop.org/patch/msgid/20231124094253.658064-1-dario.binacchi@amarulasolutions.com Signed-off-by: Sasha Levin --- include/drm/drm_bridge.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/drm/drm_bridge.h b/include/drm/drm_bridge.h index 055486e35e68..3826cf9553c0 100644 --- a/include/drm/drm_bridge.h +++ b/include/drm/drm_bridge.h @@ -186,7 +186,7 @@ struct drm_bridge_funcs { * or &drm_encoder_helper_funcs.dpms hook. * * The bridge must assume that the display pipe (i.e. clocks and timing - * singals) feeding it is no longer running when this callback is + * signals) feeding it is no longer running when this callback is * called. * * The @post_disable callback is optional. From 6f866885e147d33efc497f1095f35b2ee5ec7310 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Tue, 28 Nov 2023 17:25:16 +0800 Subject: [PATCH 151/288] f2fs: fix to avoid dirent corruption [ Upstream commit 53edb549565f55ccd0bdf43be3d66ce4c2d48b28 ] As Al reported in link[1]: f2fs_rename() ... if (old_dir != new_dir && !whiteout) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else f2fs_put_page(old_dir_page, 0); You want correct inumber in the ".." link. And cross-directory rename does move the source to new parent, even if you'd been asked to leave a whiteout in the old place. [1] https://lore.kernel.org/all/20231017055040.GN800259@ZenIV/ With below testcase, it may cause dirent corruption, due to it missed to call f2fs_set_link() to update ".." link to new directory. - mkdir -p dir/foo - renameat2 -w dir/foo bar [ASSERT] (__chk_dots_dentries:1421) --> Bad inode number[0x4] for '..', parent parent ino is [0x3] [FSCK] other corrupted bugs [Fail] Fixes: 7e01e7ad746b ("f2fs: support RENAME_WHITEOUT") Cc: Jan Kara Reported-by: Al Viro Signed-off-by: Chao Yu Reviewed-by: Jan Kara Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin --- fs/f2fs/namei.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/f2fs/namei.c b/fs/f2fs/namei.c index 72b109685db4..99e4ec48d2a4 100644 --- a/fs/f2fs/namei.c +++ b/fs/f2fs/namei.c @@ -1066,7 +1066,7 @@ static int f2fs_rename(struct inode *old_dir, struct dentry *old_dentry, } if (old_dir_entry) { - if (old_dir != new_dir && !whiteout) + if (old_dir != new_dir) f2fs_set_link(old_inode, old_dir_entry, old_dir_page, new_dir); else From ca267f79a578d32c593cc03c335d2ef7b99667cd Mon Sep 17 00:00:00 2001 From: Nikita Zhandarovich Date: Wed, 29 Nov 2023 07:22:30 -0800 Subject: [PATCH 152/288] drm/radeon/r600_cs: Fix possible int overflows in r600_cs_check_reg() [ Upstream commit 39c960bbf9d9ea862398759e75736cfb68c3446f ] While improbable, there may be a chance of hitting integer overflow when the result of radeon_get_ib_value() gets shifted left. Avoid it by casting one of the operands to larger data type (u64). Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 1729dd33d20b ("drm/radeon/kms: r600 CS parser fixes") Signed-off-by: Nikita Zhandarovich Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/radeon/r600_cs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r600_cs.c b/drivers/gpu/drm/radeon/r600_cs.c index 390a9621604a..1e6ad9daff53 100644 --- a/drivers/gpu/drm/radeon/r600_cs.c +++ b/drivers/gpu/drm/radeon/r600_cs.c @@ -1276,7 +1276,7 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) return -EINVAL; } tmp = (reg - CB_COLOR0_BASE) / 4; - track->cb_color_bo_offset[tmp] = radeon_get_ib_value(p, idx) << 8; + track->cb_color_bo_offset[tmp] = (u64)radeon_get_ib_value(p, idx) << 8; ib[idx] += (u32)((reloc->gpu_offset >> 8) & 0xffffffff); track->cb_color_base_last[tmp] = ib[idx]; track->cb_color_bo[tmp] = reloc->robj; @@ -1303,7 +1303,7 @@ static int r600_cs_check_reg(struct radeon_cs_parser *p, u32 reg, u32 idx) "0x%04X\n", reg); return -EINVAL; } - track->htile_offset = radeon_get_ib_value(p, idx) << 8; + track->htile_offset = (u64)radeon_get_ib_value(p, idx) << 8; ib[idx] += (u32)((reloc->gpu_offset >> 8) & 0xffffffff); track->htile_bo = reloc->robj; track->db_dirty = true; From 99244692122cbe725adb9c0fb61b28fb4bdbabe6 Mon Sep 17 00:00:00 2001 From: Nikita Zhandarovich Date: Wed, 29 Nov 2023 07:22:12 -0800 Subject: [PATCH 153/288] drm/radeon/r100: Fix integer overflow issues in r100_cs_track_check() [ Upstream commit b5c5baa458faa5430c445acd9a17481274d77ccf ] It may be possible, albeit unlikely, to encounter integer overflow during the multiplication of several unsigned int variables, the result being assigned to a variable 'size' of wider type. Prevent this potential behaviour by converting one of the multiples to unsigned long. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 0242f74d29df ("drm/radeon: clean up CS functions in r100.c") Signed-off-by: Nikita Zhandarovich Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/radeon/r100.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/r100.c b/drivers/gpu/drm/radeon/r100.c index 24c8db673931..6e4600c21697 100644 --- a/drivers/gpu/drm/radeon/r100.c +++ b/drivers/gpu/drm/radeon/r100.c @@ -2313,7 +2313,7 @@ int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track) switch (prim_walk) { case 1: for (i = 0; i < track->num_arrays; i++) { - size = track->arrays[i].esize * track->max_indx * 4; + size = track->arrays[i].esize * track->max_indx * 4UL; if (track->arrays[i].robj == NULL) { DRM_ERROR("(PW %u) Vertex array %u no buffer " "bound\n", prim_walk, i); @@ -2332,7 +2332,7 @@ int r100_cs_track_check(struct radeon_device *rdev, struct r100_cs_track *track) break; case 2: for (i = 0; i < track->num_arrays; i++) { - size = track->arrays[i].esize * (nverts - 1) * 4; + size = track->arrays[i].esize * (nverts - 1) * 4UL; if (track->arrays[i].robj == NULL) { DRM_ERROR("(PW %u) Vertex array %u no buffer " "bound\n", prim_walk, i); From 1421b06618f729dbd563c31ee4440aa1c6dfc538 Mon Sep 17 00:00:00 2001 From: Nikita Zhandarovich Date: Tue, 8 Aug 2023 11:04:16 -0700 Subject: [PATCH 154/288] drm/radeon: check return value of radeon_ring_lock() [ Upstream commit 71225e1c930942cb1e042fc08c5cc0c4ef30e95e ] In the unlikely event of radeon_ring_lock() failing, its errno return value should be processed. This patch checks said return value and prints a debug message in case of an error. Found by Linux Verification Center (linuxtesting.org) with static analysis tool SVACE. Fixes: 48c0c902e2e6 ("drm/radeon/kms: add support for CP setup on SI") Signed-off-by: Nikita Zhandarovich Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/radeon/si.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/gpu/drm/radeon/si.c b/drivers/gpu/drm/radeon/si.c index 31e2c1083b08..e2eac766666e 100644 --- a/drivers/gpu/drm/radeon/si.c +++ b/drivers/gpu/drm/radeon/si.c @@ -3616,6 +3616,10 @@ static int si_cp_start(struct radeon_device *rdev) for (i = RADEON_RING_TYPE_GFX_INDEX; i <= CAYMAN_RING_TYPE_CP2_INDEX; ++i) { ring = &rdev->ring[i]; r = radeon_ring_lock(rdev, ring, 2); + if (r) { + DRM_ERROR("radeon: cp failed to lock ring (%d).\n", r); + return r; + } /* clear the compute context state */ radeon_ring_write(ring, PACKET3_COMPUTE(PACKET3_CLEAR_STATE, 0)); From defe0327f555f882654a132c8cfa3eaccc5b60b8 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Dec 2023 14:20:31 +0100 Subject: [PATCH 155/288] ASoC: cs35l33: Fix GPIO name and drop legacy include [ Upstream commit 50678d339d670a92658e5538ebee30447c88ccb3 ] This driver includes the legacy GPIO APIs and but does not use any symbols from any of them. Drop the includes. Further the driver is requesting "reset-gpios" rather than just "reset" from the GPIO framework. This is wrong because the gpiolib core will add "-gpios" before processing the request from e.g. device tree. Drop the suffix. The last problem means that the optional RESET GPIO has never been properly retrieved and used even if it existed, but nobody noticed. Fixes: 3333cb7187b9 ("ASoC: cs35l33: Initial commit of the cs35l33 CODEC driver.") Acked-by: Charles Keepax Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-2-ee9f9d4655eb@linaro.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/cs35l33.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs35l33.c b/sound/soc/codecs/cs35l33.c index 8894369e329a..87b299d24bd8 100644 --- a/sound/soc/codecs/cs35l33.c +++ b/sound/soc/codecs/cs35l33.c @@ -22,13 +22,11 @@ #include #include #include -#include #include #include #include #include #include -#include #include #include #include @@ -1168,7 +1166,7 @@ static int cs35l33_i2c_probe(struct i2c_client *i2c_client, /* We could issue !RST or skip it based on AMP topology */ cs35l33->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, - "reset-gpios", GPIOD_OUT_HIGH); + "reset", GPIOD_OUT_HIGH); if (IS_ERR(cs35l33->reset_gpio)) { dev_err(&i2c_client->dev, "%s ERROR: Can't get reset GPIO\n", __func__); From 96f5856867f8d9fe9acf42e1ec0dbf5ae1b6e536 Mon Sep 17 00:00:00 2001 From: Linus Walleij Date: Fri, 1 Dec 2023 14:20:32 +0100 Subject: [PATCH 156/288] ASoC: cs35l34: Fix GPIO name and drop legacy include [ Upstream commit a6122b0b4211d132934ef99e7b737910e6d54d2f ] This driver includes the legacy GPIO APIs and but does not use any symbols from any of them. Drop the includes. Further the driver is requesting "reset-gpios" rather than just "reset" from the GPIO framework. This is wrong because the gpiolib core will add "-gpios" before processing the request from e.g. device tree. Drop the suffix. The last problem means that the optional RESET GPIO has never been properly retrieved and used even if it existed, but nobody noticed. Fixes: c1124c09e103 ("ASoC: cs35l34: Initial commit of the cs35l34 CODEC driver.") Acked-by: Charles Keepax Signed-off-by: Linus Walleij Link: https://lore.kernel.org/r/20231201-descriptors-sound-cirrus-v2-3-ee9f9d4655eb@linaro.org Signed-off-by: Mark Brown Signed-off-by: Sasha Levin --- sound/soc/codecs/cs35l34.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/sound/soc/codecs/cs35l34.c b/sound/soc/codecs/cs35l34.c index b792c006e530..d9f975b52b21 100644 --- a/sound/soc/codecs/cs35l34.c +++ b/sound/soc/codecs/cs35l34.c @@ -20,14 +20,12 @@ #include #include #include -#include #include #include #include #include #include #include -#include #include #include #include @@ -1058,7 +1056,7 @@ static int cs35l34_i2c_probe(struct i2c_client *i2c_client, dev_err(&i2c_client->dev, "Failed to request IRQ: %d\n", ret); cs35l34->reset_gpio = devm_gpiod_get_optional(&i2c_client->dev, - "reset-gpios", GPIOD_OUT_LOW); + "reset", GPIOD_OUT_LOW); if (IS_ERR(cs35l34->reset_gpio)) return PTR_ERR(cs35l34->reset_gpio); From b704eabe8780221a4401c7db68cad3d75617c806 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Tue, 28 Nov 2023 00:54:01 +0300 Subject: [PATCH 157/288] drm/msm/mdp4: flush vblank event on disable [ Upstream commit c6721b3c6423d8a348ae885a0f4c85e14f9bf85c ] Flush queued events when disabling the crtc. This avoids timeouts when we come back and wait for dependencies (like the previous frame's flip_done). Fixes: c8afe684c95c ("drm/msm: basic KMS driver for snapdragon") Signed-off-by: Dmitry Baryshkov Reviewed-by: Abhinav Kumar Patchwork: https://patchwork.freedesktop.org/patch/569127/ Link: https://lore.kernel.org/r/20231127215401.4064128-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/disp/mdp4/mdp4_crtc.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/gpu/drm/msm/disp/mdp4/mdp4_crtc.c b/drivers/gpu/drm/msm/disp/mdp4/mdp4_crtc.c index a0253297bc76..bf54b9e4fd61 100644 --- a/drivers/gpu/drm/msm/disp/mdp4/mdp4_crtc.c +++ b/drivers/gpu/drm/msm/disp/mdp4/mdp4_crtc.c @@ -268,6 +268,7 @@ static void mdp4_crtc_atomic_disable(struct drm_crtc *crtc, { struct mdp4_crtc *mdp4_crtc = to_mdp4_crtc(crtc); struct mdp4_kms *mdp4_kms = get_kms(crtc); + unsigned long flags; DBG("%s", mdp4_crtc->name); @@ -280,6 +281,14 @@ static void mdp4_crtc_atomic_disable(struct drm_crtc *crtc, mdp_irq_unregister(&mdp4_kms->base, &mdp4_crtc->err); mdp4_disable(mdp4_kms); + if (crtc->state->event && !crtc->state->active) { + WARN_ON(mdp4_crtc->event); + spin_lock_irqsave(&mdp4_kms->dev->event_lock, flags); + drm_crtc_send_vblank_event(crtc, crtc->state->event); + crtc->state->event = NULL; + spin_unlock_irqrestore(&mdp4_kms->dev->event_lock, flags); + } + mdp4_crtc->enabled = false; } From da5e0feb12f25b9f7621cc10d5bafea8b90ad03e Mon Sep 17 00:00:00 2001 From: Konrad Dybcio Date: Tue, 20 Jun 2023 13:43:20 +0200 Subject: [PATCH 158/288] drm/msm/dsi: Use pm_runtime_resume_and_get to prevent refcnt leaks [ Upstream commit 3d07a411b4faaf2b498760ccf12888f8de529de0 ] This helper has been introduced to avoid programmer errors (missing _put calls leading to dangling refcnt) when using pm_runtime_get, use it. While at it, start checking the return value. Signed-off-by: Konrad Dybcio Reviewed-by: Dmitry Baryshkov Fixes: 5c8290284402 ("drm/msm/dsi: Split PHY drivers to separate files") Patchwork: https://patchwork.freedesktop.org/patch/543350/ Link: https://lore.kernel.org/r/20230620-topic-dsiphy_rpm-v2-1-a11a751f34f0@linaro.org Signed-off-by: Dmitry Baryshkov Signed-off-by: Sasha Levin --- drivers/gpu/drm/msm/dsi/phy/dsi_phy.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c index 2e0be85ec394..10eacfd95fb1 100644 --- a/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c +++ b/drivers/gpu/drm/msm/dsi/phy/dsi_phy.c @@ -558,7 +558,9 @@ static int dsi_phy_enable_resource(struct msm_dsi_phy *phy) struct device *dev = &phy->pdev->dev; int ret; - pm_runtime_get_sync(dev); + ret = pm_runtime_resume_and_get(dev); + if (ret) + return ret; ret = clk_prepare_enable(phy->ahb_clk); if (ret) { From c20a6aa0a3f3f7f29f3387b803e768a5e372f6d6 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Sun, 3 Dec 2023 01:55:52 +0300 Subject: [PATCH 159/288] drm/drv: propagate errors from drm_modeset_register_all() [ Upstream commit 5f8dec200923a76dc57187965fd59c1136f5d085 ] In case the drm_modeset_register_all() function fails, its error code will be ignored. Instead make the drm_dev_register() bail out in case of such an error. Fixes: 79190ea2658a ("drm: Add callbacks for late registering") Reviewed-by: Neil Armstrong Signed-off-by: Dmitry Baryshkov Signed-off-by: Maxime Ripard Link: https://patchwork.freedesktop.org/patch/msgid/20231202225552.1283638-1-dmitry.baryshkov@linaro.org Signed-off-by: Sasha Levin --- drivers/gpu/drm/drm_drv.c | 10 ++++++++-- 1 file changed, 8 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 4ca995ce19af..10831d8d7148 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -892,8 +892,11 @@ int drm_dev_register(struct drm_device *dev, unsigned long flags) goto err_minors; } - if (drm_core_check_feature(dev, DRIVER_MODESET)) - drm_modeset_register_all(dev); + if (drm_core_check_feature(dev, DRIVER_MODESET)) { + ret = drm_modeset_register_all(dev); + if (ret) + goto err_unload; + } ret = 0; @@ -905,6 +908,9 @@ int drm_dev_register(struct drm_device *dev, unsigned long flags) goto out_unlock; +err_unload: + if (dev->driver->unload) + dev->driver->unload(dev); err_minors: remove_compat_control_link(dev); drm_minor_unregister(dev, DRM_MINOR_PRIMARY); From 57ca7984806d79b38af528de88fd803babf27feb Mon Sep 17 00:00:00 2001 From: Yang Yingliang Date: Thu, 30 Nov 2023 15:50:16 +0800 Subject: [PATCH 160/288] drm/radeon: check the alloc_workqueue return value in radeon_crtc_init() [ Upstream commit 7a2464fac80d42f6f8819fed97a553e9c2f43310 ] check the alloc_workqueue return value in radeon_crtc_init() to avoid null-ptr-deref. Fixes: fa7f517cb26e ("drm/radeon: rework page flip handling v4") Signed-off-by: Yang Yingliang Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/radeon/radeon_display.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/radeon_display.c b/drivers/gpu/drm/radeon/radeon_display.c index 71bdafac9210..07d23a1e62a0 100644 --- a/drivers/gpu/drm/radeon/radeon_display.c +++ b/drivers/gpu/drm/radeon/radeon_display.c @@ -689,11 +689,16 @@ static void radeon_crtc_init(struct drm_device *dev, int index) if (radeon_crtc == NULL) return; + radeon_crtc->flip_queue = alloc_workqueue("radeon-crtc", WQ_HIGHPRI, 0); + if (!radeon_crtc->flip_queue) { + kfree(radeon_crtc); + return; + } + drm_crtc_init(dev, &radeon_crtc->base, &radeon_crtc_funcs); drm_mode_crtc_set_gamma_size(&radeon_crtc->base, 256); radeon_crtc->crtc_id = index; - radeon_crtc->flip_queue = alloc_workqueue("radeon-crtc", WQ_HIGHPRI, 0); rdev->mode_info.crtcs[index] = radeon_crtc; if (rdev->family >= CHIP_BONAIRE) { From e646308eda40c15e8349b711ea9cdd6fb72cc5cd Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Mon, 4 Dec 2023 16:57:56 +0800 Subject: [PATCH 161/288] drm/radeon/dpm: fix a memleak in sumo_parse_power_table [ Upstream commit 0737df9ed0997f5b8addd6e2b9699a8c6edba2e4 ] The rdev->pm.dpm.ps allocated by kcalloc should be freed in every following error-handling path. However, in the error-handling of rdev->pm.power_state[i].clock_info the rdev->pm.dpm.ps is not freed, resulting in a memleak in this function. Fixes: 80ea2c129c76 ("drm/radeon/kms: add dpm support for sumo asics (v2)") Signed-off-by: Zhipeng Lu Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/radeon/sumo_dpm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/sumo_dpm.c b/drivers/gpu/drm/radeon/sumo_dpm.c index b95d5d390caf..45d04996adf5 100644 --- a/drivers/gpu/drm/radeon/sumo_dpm.c +++ b/drivers/gpu/drm/radeon/sumo_dpm.c @@ -1493,8 +1493,10 @@ static int sumo_parse_power_table(struct radeon_device *rdev) non_clock_array_index = power_state->v2.nonClockInfoIndex; non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *) &non_clock_info_array->nonClockInfo[non_clock_array_index]; - if (!rdev->pm.power_state[i].clock_info) + if (!rdev->pm.power_state[i].clock_info) { + kfree(rdev->pm.dpm.ps); return -EINVAL; + } ps = kzalloc(sizeof(struct sumo_ps), GFP_KERNEL); if (ps == NULL) { kfree(rdev->pm.dpm.ps); From 3f6932b5baa1465c0e5c5dff7dcaf0609dab0afa Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Mon, 4 Dec 2023 18:21:54 +0800 Subject: [PATCH 162/288] drm/radeon/trinity_dpm: fix a memleak in trinity_parse_power_table [ Upstream commit 28c28d7f77c06ac2c0b8f9c82bc04eba22912b3b ] The rdev->pm.dpm.ps allocated by kcalloc should be freed in every following error-handling path. However, in the error-handling of rdev->pm.power_state[i].clock_info the rdev->pm.dpm.ps is not freed, resulting in a memleak in this function. Fixes: d70229f70447 ("drm/radeon/kms: add dpm support for trinity asics") Signed-off-by: Zhipeng Lu Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/radeon/trinity_dpm.c | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/radeon/trinity_dpm.c b/drivers/gpu/drm/radeon/trinity_dpm.c index 4d93b84aa739..49c28fbe366e 100644 --- a/drivers/gpu/drm/radeon/trinity_dpm.c +++ b/drivers/gpu/drm/radeon/trinity_dpm.c @@ -1770,8 +1770,10 @@ static int trinity_parse_power_table(struct radeon_device *rdev) non_clock_array_index = power_state->v2.nonClockInfoIndex; non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *) &non_clock_info_array->nonClockInfo[non_clock_array_index]; - if (!rdev->pm.power_state[i].clock_info) + if (!rdev->pm.power_state[i].clock_info) { + kfree(rdev->pm.dpm.ps); return -EINVAL; + } ps = kzalloc(sizeof(struct sumo_ps), GFP_KERNEL); if (ps == NULL) { kfree(rdev->pm.dpm.ps); From abd50cebf9c7c858606879b3524224cd6d4ac203 Mon Sep 17 00:00:00 2001 From: Tomi Valkeinen Date: Fri, 3 Nov 2023 15:14:06 +0200 Subject: [PATCH 163/288] drm/bridge: tc358767: Fix return value on error case [ Upstream commit 32bd29b619638256c5b75fb021d6d9f12fc4a984 ] If the hpd_pin is invalid, the driver returns 'ret'. But 'ret' contains 0, instead of an error value. Return -EINVAL instead. Fixes: f25ee5017e4f ("drm/bridge: tc358767: add IRQ and HPD support") Acked-by: Maxime Ripard Signed-off-by: Tomi Valkeinen Link: https://patchwork.freedesktop.org/patch/msgid/20231103-uninit-fixes-v2-4-c22b2444f5f5@ideasonboard.com Signed-off-by: Sasha Levin --- drivers/gpu/drm/bridge/tc358767.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/gpu/drm/bridge/tc358767.c b/drivers/gpu/drm/bridge/tc358767.c index b4f7e7a7f7c5..9c905634fec7 100644 --- a/drivers/gpu/drm/bridge/tc358767.c +++ b/drivers/gpu/drm/bridge/tc358767.c @@ -1637,7 +1637,7 @@ static int tc_probe(struct i2c_client *client, const struct i2c_device_id *id) } else { if (tc->hpd_pin < 0 || tc->hpd_pin > 1) { dev_err(dev, "failed to parse HPD number\n"); - return ret; + return -EINVAL; } } From 21a30b59693acf05846990760cd93766c64b91cf Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Fri, 1 Dec 2023 21:22:55 +0800 Subject: [PATCH 164/288] media: cx231xx: fix a memleak in cx231xx_init_isoc [ Upstream commit 5d3c8990e2bbf929cb211563dadd70708f42e4e6 ] The dma_q->p_left_data alloced by kzalloc should be freed in all the following error handling paths. However, it hasn't been freed in the allocation error paths of dev->video_mode.isoc_ctl.urb and dev->video_mode.isoc_ctl.transfer_buffer. On the other hand, the dma_q->p_left_data did be freed in the error-handling paths after that of dev->video_mode.isoc_ctl.urb and dev->video_mode.isoc_ctl.transfer_buffer, by calling cx231xx_uninit_isoc(dev). So the same free operation should be done in error-handling paths of those two allocation. Fixes: 64fbf4445526 ("[media] cx231xx: Added support for Carraera, Shelby, RDx_253S and VIDEO_GRABBER") Signed-off-by: Zhipeng Lu Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin --- drivers/media/usb/cx231xx/cx231xx-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/usb/cx231xx/cx231xx-core.c b/drivers/media/usb/cx231xx/cx231xx-core.c index 05d91caaed0c..46e34225b45c 100644 --- a/drivers/media/usb/cx231xx/cx231xx-core.c +++ b/drivers/media/usb/cx231xx/cx231xx-core.c @@ -1024,6 +1024,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, if (!dev->video_mode.isoc_ctl.urb) { dev_err(dev->dev, "cannot alloc memory for usb buffers\n"); + kfree(dma_q->p_left_data); return -ENOMEM; } @@ -1033,6 +1034,7 @@ int cx231xx_init_isoc(struct cx231xx *dev, int max_packets, dev_err(dev->dev, "cannot allocate memory for usbtransfer\n"); kfree(dev->video_mode.isoc_ctl.urb); + kfree(dma_q->p_left_data); return -ENOMEM; } From 962b35733b469e34072f6798e0a15e943cf0e6b0 Mon Sep 17 00:00:00 2001 From: Satya Priya Kakitapalli Date: Wed, 22 Nov 2023 09:58:14 +0530 Subject: [PATCH 165/288] clk: qcom: gpucc-sm8150: Update the gpu_cc_pll1 config [ Upstream commit 6ebd9a4f8b8d2b35cf965a04849c4ba763722f13 ] Update the test_ctl_hi_val and test_ctl_hi1_val of gpu_cc_pll1 as per latest HW recommendation. Fixes: 0cef71f2ccc8 ("clk: qcom: Add graphics clock controller driver for SM8150") Signed-off-by: Satya Priya Kakitapalli Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231122042814.4158076-1-quic_skakitap@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin --- drivers/clk/qcom/gpucc-sm8150.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/clk/qcom/gpucc-sm8150.c b/drivers/clk/qcom/gpucc-sm8150.c index 27c40754b2c7..3d9b296a6e4a 100644 --- a/drivers/clk/qcom/gpucc-sm8150.c +++ b/drivers/clk/qcom/gpucc-sm8150.c @@ -38,8 +38,8 @@ static struct alpha_pll_config gpu_cc_pll1_config = { .config_ctl_hi_val = 0x00002267, .config_ctl_hi1_val = 0x00000024, .test_ctl_val = 0x00000000, - .test_ctl_hi_val = 0x00000002, - .test_ctl_hi1_val = 0x00000000, + .test_ctl_hi_val = 0x00000000, + .test_ctl_hi1_val = 0x00000020, .user_ctl_val = 0x00000000, .user_ctl_hi_val = 0x00000805, .user_ctl_hi1_val = 0x000000d0, From b864287581c5dcf382891ec0c13a1b6a9b2e0ef4 Mon Sep 17 00:00:00 2001 From: Laurent Pinchart Date: Tue, 14 Jun 2022 20:10:36 +0100 Subject: [PATCH 166/288] media: rkisp1: Disable runtime PM in probe error path [ Upstream commit 13c9810281f8b24af9b7712cd84a1fce61843e93 ] If the v4l2_device_register() call fails, runtime PM is left enabled. Fix it. Signed-off-by: Laurent Pinchart Reviewed-by: Dafna Hirschfeld Reviewed-by: Paul Elder Signed-off-by: Mauro Carvalho Chehab Stable-dep-of: 452f604a4683 ("media: rkisp1: Fix media device memory leak") Signed-off-by: Sasha Levin --- drivers/staging/media/rkisp1/rkisp1-dev.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/staging/media/rkisp1/rkisp1-dev.c b/drivers/staging/media/rkisp1/rkisp1-dev.c index 06de5540c8af..663b2efec9b0 100644 --- a/drivers/staging/media/rkisp1/rkisp1-dev.c +++ b/drivers/staging/media/rkisp1/rkisp1-dev.c @@ -518,7 +518,7 @@ static int rkisp1_probe(struct platform_device *pdev) ret = v4l2_device_register(rkisp1->dev, &rkisp1->v4l2_dev); if (ret) - return ret; + goto err_pm_runtime_disable; ret = media_device_register(&rkisp1->media_dev); if (ret) { @@ -538,6 +538,7 @@ static int rkisp1_probe(struct platform_device *pdev) media_device_unregister(&rkisp1->media_dev); err_unreg_v4l2_dev: v4l2_device_unregister(&rkisp1->v4l2_dev); +err_pm_runtime_disable: pm_runtime_disable(&pdev->dev); return ret; } From 40d36882c7dca295c631e3dc1e7b5a5382ee8a19 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Sun, 10 Dec 2023 19:35:44 +0800 Subject: [PATCH 167/288] f2fs: fix to check compress file in f2fs_move_file_range() [ Upstream commit fb9b65340c818875ea86464faf3c744bdce0055c ] f2fs_move_file_range() doesn't support migrating compressed cluster data, let's add the missing check condition and return -EOPNOTSUPP for the case until we support it. Fixes: 4c8ff7095bef ("f2fs: support data compression") Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin --- fs/f2fs/file.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 4e6b93f16758..98960c8d72c0 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -2816,6 +2816,11 @@ static int f2fs_move_file_range(struct file *file_in, loff_t pos_in, goto out; } + if (f2fs_compressed_file(src) || f2fs_compressed_file(dst)) { + ret = -EOPNOTSUPP; + goto out_unlock; + } + ret = -EINVAL; if (pos_in + len > src->i_size || pos_in + len < pos_in) goto out_unlock; From 9284f409e4070e8d9b31e9134a4ddae3d824e3e7 Mon Sep 17 00:00:00 2001 From: Chao Yu Date: Sun, 10 Dec 2023 19:35:47 +0800 Subject: [PATCH 168/288] f2fs: fix to update iostat correctly in f2fs_filemap_fault() [ Upstream commit bb34cc6ca87ff78f9fb5913d7619dc1389554da6 ] In f2fs_filemap_fault(), it fixes to update iostat info only if VM_FAULT_LOCKED is tagged in return value of filemap_fault(). Fixes: 8b83ac81f428 ("f2fs: support read iostat") Signed-off-by: Chao Yu Signed-off-by: Jaegeuk Kim Signed-off-by: Sasha Levin --- fs/f2fs/file.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/fs/f2fs/file.c b/fs/f2fs/file.c index 98960c8d72c0..55818bd510fb 100644 --- a/fs/f2fs/file.c +++ b/fs/f2fs/file.c @@ -42,7 +42,7 @@ static vm_fault_t f2fs_filemap_fault(struct vm_fault *vmf) ret = filemap_fault(vmf); up_read(&F2FS_I(inode)->i_mmap_sem); - if (!ret) + if (ret & VM_FAULT_LOCKED) f2fs_update_iostat(F2FS_I_SB(inode), APP_MAPPED_READ_IO, F2FS_BLKSIZE); From b5ebb9b4c1dad4e0142c85fd1dcf3f09dec3f91f Mon Sep 17 00:00:00 2001 From: Dan Carpenter Date: Tue, 31 Oct 2023 12:53:33 +0300 Subject: [PATCH 169/288] media: dvbdev: drop refcount on error path in dvb_device_open() [ Upstream commit a2dd235df435a05d389240be748909ada91201d2 ] If call to file->f_op->open() fails, then call dvb_device_put(dvbdev). Fixes: 0fc044b2b5e2 ("media: dvbdev: adopts refcnt to avoid UAF") Signed-off-by: Dan Carpenter Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin --- drivers/media/dvb-core/dvbdev.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/media/dvb-core/dvbdev.c b/drivers/media/dvb-core/dvbdev.c index 2ff8a1b776fb..3a83e8e09256 100644 --- a/drivers/media/dvb-core/dvbdev.c +++ b/drivers/media/dvb-core/dvbdev.c @@ -114,6 +114,8 @@ static int dvb_device_open(struct inode *inode, struct file *file) err = file->f_op->open(inode, file); up_read(&minor_rwsem); mutex_unlock(&dvbdev_mutex); + if (err) + dvb_device_put(dvbdev); return err; } fail: From 56a79c68b5e32b2cf34a65a9fbaa00641f6b054c Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Mon, 30 Oct 2023 08:20:26 +0100 Subject: [PATCH 170/288] media: dvb-frontends: m88ds3103: Fix a memory leak in an error handling path of m88ds3103_probe() [ Upstream commit 5b2f885e2f6f482d05c23f04c8240f7b4fc5bdb5 ] If an error occurs after a successful i2c_mux_add_adapter(), then i2c_mux_del_adapters() should be called to free some resources, as already done in the remove function. Fixes: e6089feca460 ("media: m88ds3103: Add support for ds3103b demod") Signed-off-by: Christophe JAILLET Signed-off-by: Hans Verkuil Signed-off-by: Sasha Levin --- drivers/media/dvb-frontends/m88ds3103.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/media/dvb-frontends/m88ds3103.c b/drivers/media/dvb-frontends/m88ds3103.c index ff106d6ece68..94c6cc59372c 100644 --- a/drivers/media/dvb-frontends/m88ds3103.c +++ b/drivers/media/dvb-frontends/m88ds3103.c @@ -1898,7 +1898,7 @@ static int m88ds3103_probe(struct i2c_client *client, /* get frontend address */ ret = regmap_read(dev->regmap, 0x29, &utmp); if (ret) - goto err_kfree; + goto err_del_adapters; dev->dt_addr = ((utmp & 0x80) == 0) ? 0x42 >> 1 : 0x40 >> 1; dev_dbg(&client->dev, "dt addr is 0x%02x\n", dev->dt_addr); @@ -1906,11 +1906,14 @@ static int m88ds3103_probe(struct i2c_client *client, dev->dt_addr); if (IS_ERR(dev->dt_client)) { ret = PTR_ERR(dev->dt_client); - goto err_kfree; + goto err_del_adapters; } } return 0; + +err_del_adapters: + i2c_mux_del_adapters(dev->muxc); err_kfree: kfree(dev); err: From d53fee9e34f66f423730ad83bd5ef07b6aafeb62 Mon Sep 17 00:00:00 2001 From: Alex Deucher Date: Mon, 27 Nov 2023 17:26:29 -0500 Subject: [PATCH 171/288] drm/amdgpu/debugfs: fix error code when smc register accessors are NULL MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit afe58346d5d3887b3e49ff623d2f2e471f232a8d ] Should be -EOPNOTSUPP. Fixes: 5104fdf50d32 ("drm/amdgpu: Fix a null pointer access when the smc_rreg pointer is NULL") Reviewed-by: Christian König Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c index 3e573077368b..8a1cb1de2b13 100644 --- a/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c +++ b/drivers/gpu/drm/amd/amdgpu/amdgpu_debugfs.c @@ -582,7 +582,7 @@ static ssize_t amdgpu_debugfs_regs_smc_read(struct file *f, char __user *buf, int r; if (!adev->smc_rreg) - return -EPERM; + return -EOPNOTSUPP; if (size & 0x3 || *pos & 0x3) return -EINVAL; @@ -644,7 +644,7 @@ static ssize_t amdgpu_debugfs_regs_smc_write(struct file *f, const char __user * int r; if (!adev->smc_wreg) - return -EPERM; + return -EOPNOTSUPP; if (size & 0x3 || *pos & 0x3) return -EINVAL; From aeed2b4e4a70c7568d4a5eecd6a109713c0dfbf4 Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Thu, 14 Dec 2023 23:24:11 +0800 Subject: [PATCH 172/288] drm/amd/pm: fix a double-free in si_dpm_init [ Upstream commit ac16667237a82e2597e329eb9bc520d1cf9dff30 ] When the allocation of adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries fails, amdgpu_free_extended_power_table is called to free some fields of adev. However, when the control flow returns to si_dpm_sw_init, it goes to label dpm_failed and calls si_dpm_fini, which calls amdgpu_free_extended_power_table again and free those fields again. Thus a double-free is triggered. Fixes: 841686df9f7d ("drm/amdgpu: add SI DPM support (v4)") Signed-off-by: Zhipeng Lu Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/pm/powerplay/si_dpm.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c index d6544a6dabc7..6f0653c81f8f 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c +++ b/drivers/gpu/drm/amd/pm/powerplay/si_dpm.c @@ -7349,10 +7349,9 @@ static int si_dpm_init(struct amdgpu_device *adev) kcalloc(4, sizeof(struct amdgpu_clock_voltage_dependency_entry), GFP_KERNEL); - if (!adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries) { - amdgpu_free_extended_power_table(adev); + if (!adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries) return -ENOMEM; - } + adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.count = 4; adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries[0].clk = 0; adev->pm.dpm.dyn_state.vddc_dependency_on_dispclk.entries[0].v = 0; From 520e213a0b97b64735a13950e9371e0a5d7a5dc3 Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Fri, 15 Dec 2023 00:24:58 +0800 Subject: [PATCH 173/288] drivers/amd/pm: fix a use-after-free in kv_parse_power_table [ Upstream commit 28dd788382c43b330480f57cd34cde0840896743 ] When ps allocated by kzalloc equals to NULL, kv_parse_power_table frees adev->pm.dpm.ps that allocated before. However, after the control flow goes through the following call chains: kv_parse_power_table |-> kv_dpm_init |-> kv_dpm_sw_init |-> kv_dpm_fini The adev->pm.dpm.ps is used in the for loop of kv_dpm_fini after its first free in kv_parse_power_table and causes a use-after-free bug. Fixes: a2e73f56fa62 ("drm/amdgpu: Add support for CIK parts") Signed-off-by: Zhipeng Lu Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c index c8a5a5698edd..6eb6f05c1136 100644 --- a/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c +++ b/drivers/gpu/drm/amd/pm/powerplay/kv_dpm.c @@ -2733,10 +2733,8 @@ static int kv_parse_power_table(struct amdgpu_device *adev) non_clock_info = (struct _ATOM_PPLIB_NONCLOCK_INFO *) &non_clock_info_array->nonClockInfo[non_clock_array_index]; ps = kzalloc(sizeof(struct kv_ps), GFP_KERNEL); - if (ps == NULL) { - kfree(adev->pm.dpm.ps); + if (ps == NULL) return -ENOMEM; - } adev->pm.dpm.ps[i].ps_priv = ps; k = 0; idx = (u8 *)&power_state->v2.clockInfoIndex[0]; From 0c8ba6937a8ca675cb7526f83d4df1450d610f27 Mon Sep 17 00:00:00 2001 From: Zhipeng Lu Date: Fri, 15 Dec 2023 00:58:42 +0800 Subject: [PATCH 174/288] gpu/drm/radeon: fix two memleaks in radeon_vm_init [ Upstream commit c2709b2d6a537ca0fa0f1da36fdaf07e48ef447d ] When radeon_bo_create and radeon_vm_clear_bo fail, the vm->page_tables allocated before need to be freed. However, neither radeon_vm_init itself nor its caller have done such deallocation. Fixes: 6d2f2944e95e ("drm/radeon: use normal BOs for the page tables v4") Signed-off-by: Zhipeng Lu Signed-off-by: Alex Deucher Signed-off-by: Sasha Levin --- drivers/gpu/drm/radeon/radeon_vm.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/gpu/drm/radeon/radeon_vm.c b/drivers/gpu/drm/radeon/radeon_vm.c index 27b14eff532c..cb75ff1f6f2c 100644 --- a/drivers/gpu/drm/radeon/radeon_vm.c +++ b/drivers/gpu/drm/radeon/radeon_vm.c @@ -1206,13 +1206,17 @@ int radeon_vm_init(struct radeon_device *rdev, struct radeon_vm *vm) r = radeon_bo_create(rdev, pd_size, align, true, RADEON_GEM_DOMAIN_VRAM, 0, NULL, NULL, &vm->page_directory); - if (r) + if (r) { + kfree(vm->page_tables); + vm->page_tables = NULL; return r; - + } r = radeon_vm_clear_bo(rdev, vm->page_directory); if (r) { radeon_bo_unref(&vm->page_directory); vm->page_directory = NULL; + kfree(vm->page_tables); + vm->page_tables = NULL; return r; } From 74bbdacf1bc9a2afb4def2fec06f7e2140e14cfb Mon Sep 17 00:00:00 2001 From: Satya Priya Kakitapalli Date: Fri, 1 Dec 2023 15:20:24 +0530 Subject: [PATCH 175/288] dt-bindings: clock: Update the videocc resets for sm8150 [ Upstream commit 3185f96968eedd117ec72ee7b87ead44b6d1bbbd ] Add all the available resets for the video clock controller on sm8150. Signed-off-by: Satya Priya Kakitapalli Acked-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-1-56bec3a5e443@quicinc.com Signed-off-by: Bjorn Andersson Stable-dep-of: 1fd9a939db24 ("clk: qcom: videocc-sm8150: Update the videocc resets") Signed-off-by: Sasha Levin --- include/dt-bindings/clock/qcom,videocc-sm8150.h | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/include/dt-bindings/clock/qcom,videocc-sm8150.h b/include/dt-bindings/clock/qcom,videocc-sm8150.h index e24ee840cfdb..c557b78dc572 100644 --- a/include/dt-bindings/clock/qcom,videocc-sm8150.h +++ b/include/dt-bindings/clock/qcom,videocc-sm8150.h @@ -16,6 +16,10 @@ /* VIDEO_CC Resets */ #define VIDEO_CC_MVSC_CORE_CLK_BCR 0 +#define VIDEO_CC_INTERFACE_BCR 1 +#define VIDEO_CC_MVS0_BCR 2 +#define VIDEO_CC_MVS1_BCR 3 +#define VIDEO_CC_MVSC_BCR 4 /* VIDEO_CC GDSCRs */ #define VENUS_GDSC 0 From 84ee04572faa87bfedb3699ffaaad9d27b965465 Mon Sep 17 00:00:00 2001 From: Satya Priya Kakitapalli Date: Fri, 1 Dec 2023 15:20:25 +0530 Subject: [PATCH 176/288] clk: qcom: videocc-sm8150: Update the videocc resets [ Upstream commit 1fd9a939db24d2f66e48f8bca3e3654add3fa205 ] Add all the available resets for the video clock controller on sm8150. Fixes: 5658e8cf1a8a ("clk: qcom: add video clock controller driver for SM8150") Signed-off-by: Satya Priya Kakitapalli Reviewed-by: Bryan O'Donoghue Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-2-56bec3a5e443@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin --- drivers/clk/qcom/videocc-sm8150.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/clk/qcom/videocc-sm8150.c b/drivers/clk/qcom/videocc-sm8150.c index 3087e2ec8fd4..03697a7910fa 100644 --- a/drivers/clk/qcom/videocc-sm8150.c +++ b/drivers/clk/qcom/videocc-sm8150.c @@ -218,6 +218,10 @@ static const struct regmap_config video_cc_sm8150_regmap_config = { static const struct qcom_reset_map video_cc_sm8150_resets[] = { [VIDEO_CC_MVSC_CORE_CLK_BCR] = { 0x850, 2 }, + [VIDEO_CC_INTERFACE_BCR] = { 0x8f0 }, + [VIDEO_CC_MVS0_BCR] = { 0x870 }, + [VIDEO_CC_MVS1_BCR] = { 0x8b0 }, + [VIDEO_CC_MVSC_BCR] = { 0x810 }, }; static const struct qcom_cc_desc video_cc_sm8150_desc = { From 6cccbfafc0d36ab0f202f0dbcfdaf853eb1e80a9 Mon Sep 17 00:00:00 2001 From: Satya Priya Kakitapalli Date: Fri, 1 Dec 2023 15:20:26 +0530 Subject: [PATCH 177/288] clk: qcom: videocc-sm8150: Add missing PLL config property [ Upstream commit 71f130c9193f613d497f7245365ed05ffdb0a401 ] When the driver was ported upstream, PLL test_ctl_hi1 register value was omitted. Add it to ensure the PLLs are fully configured. Fixes: 5658e8cf1a8a ("clk: qcom: add video clock controller driver for SM8150") Signed-off-by: Satya Priya Kakitapalli Reviewed-by: Konrad Dybcio Link: https://lore.kernel.org/r/20231201-videocc-8150-v3-3-56bec3a5e443@quicinc.com Signed-off-by: Bjorn Andersson Signed-off-by: Sasha Levin --- drivers/clk/qcom/videocc-sm8150.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/clk/qcom/videocc-sm8150.c b/drivers/clk/qcom/videocc-sm8150.c index 03697a7910fa..61089cde4222 100644 --- a/drivers/clk/qcom/videocc-sm8150.c +++ b/drivers/clk/qcom/videocc-sm8150.c @@ -37,6 +37,7 @@ static struct alpha_pll_config video_pll0_config = { .config_ctl_val = 0x20485699, .config_ctl_hi_val = 0x00002267, .config_ctl_hi1_val = 0x00000024, + .test_ctl_hi1_val = 0x00000020, .user_ctl_val = 0x00000000, .user_ctl_hi_val = 0x00000805, .user_ctl_hi1_val = 0x000000D0, From 7fdcd873c047874ce49664c8b67335b3cdca84a0 Mon Sep 17 00:00:00 2001 From: Jay Buddhabhatti Date: Wed, 29 Nov 2023 03:29:15 -0800 Subject: [PATCH 178/288] drivers: clk: zynqmp: calculate closest mux rate [ Upstream commit b782921ddd7f84f524723090377903f399fdbbcb ] Currently zynqmp clock driver is not calculating closest mux rate and because of that Linux is not setting proper frequency for CPU and not able to set given frequency for dynamic frequency scaling. E.g., In current logic initial acpu clock parent and frequency as below apll1 0 0 0 2199999978 0 0 50000 Y acpu0_mux 0 0 0 2199999978 0 0 50000 Y acpu0_idiv1 0 0 0 2199999978 0 0 50000 Y acpu0 0 0 0 2199999978 0 0 50000 Y After changing acpu frequency to 549999994 Hz using CPU freq scaling its selecting incorrect parent which is not closest frequency. rpll_to_xpd 0 0 0 1599999984 0 0 50000 Y acpu0_mux 0 0 0 1599999984 0 0 50000 Y acpu0_div1 0 0 0 533333328 0 0 50000 Y acpu0 0 0 0 533333328 0 0 50000 Y Parent should remain same since 549999994 = 2199999978 / 4. So use __clk_mux_determine_rate_closest() generic function to calculate closest rate for mux clock. After this change its selecting correct parent and correct clock rate. apll1 0 0 0 2199999978 0 0 50000 Y acpu0_mux 0 0 0 2199999978 0 0 50000 Y acpu0_div1 0 0 0 549999995 0 0 50000 Y acpu0 0 0 0 549999995 0 0 50000 Y Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Jay Buddhabhatti Link: https://lore.kernel.org/r/20231129112916.23125-2-jay.buddhabhatti@amd.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin --- drivers/clk/zynqmp/clk-mux-zynqmp.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/zynqmp/clk-mux-zynqmp.c b/drivers/clk/zynqmp/clk-mux-zynqmp.c index 06194149be83..46ff5cb733ee 100644 --- a/drivers/clk/zynqmp/clk-mux-zynqmp.c +++ b/drivers/clk/zynqmp/clk-mux-zynqmp.c @@ -83,7 +83,7 @@ static int zynqmp_clk_mux_set_parent(struct clk_hw *hw, u8 index) static const struct clk_ops zynqmp_clk_mux_ops = { .get_parent = zynqmp_clk_mux_get_parent, .set_parent = zynqmp_clk_mux_set_parent, - .determine_rate = __clk_mux_determine_rate, + .determine_rate = __clk_mux_determine_rate_closest, }; static const struct clk_ops zynqmp_clk_mux_ro_ops = { From 45b4ea38c93cee2d85278dff98cc13965390b196 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Thu, 18 Aug 2022 17:01:53 +0530 Subject: [PATCH 179/288] clk: zynqmp: make bestdiv unsigned [ Upstream commit d3954b51b475c4848179cd90b24ac73684cdc76b ] Divisor is always positive make it u32 *. Also the arguments passed are currently of u32 pointers. Signed-off-by: Shubhrajyoti Datta Link: https://lore.kernel.org/r/20220818113153.14431-1-shubhrajyoti.datta@amd.com Signed-off-by: Stephen Boyd Stable-dep-of: 1fe15be1fb61 ("drivers: clk: zynqmp: update divider round rate logic") Signed-off-by: Sasha Levin --- drivers/clk/zynqmp/divider.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c index 66da02b83d39..57bf381f630d 100644 --- a/drivers/clk/zynqmp/divider.c +++ b/drivers/clk/zynqmp/divider.c @@ -112,7 +112,7 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw, static void zynqmp_get_divider2_val(struct clk_hw *hw, unsigned long rate, struct zynqmp_clk_divider *divider, - int *bestdiv) + u32 *bestdiv) { int div1; int div2; From af0b86199b6c50dc2f4274c7617aa724208506c6 Mon Sep 17 00:00:00 2001 From: Shubhrajyoti Datta Date: Wed, 18 May 2022 11:23:14 +0530 Subject: [PATCH 180/288] clk: zynqmp: Add a check for NULL pointer [ Upstream commit 6ab9810cfe6c8f3d8b8750c827d7870abd3751b9 ] Add a NULL pointer check as clk_hw_get_parent can return NULL. Signed-off-by: Shubhrajyoti Datta Link: https://lore.kernel.org/r/20220518055314.2486-1-shubhrajyoti.datta@xilinx.com Acked-by: Michal Simek Signed-off-by: Stephen Boyd Stable-dep-of: 1fe15be1fb61 ("drivers: clk: zynqmp: update divider round rate logic") Signed-off-by: Sasha Levin --- drivers/clk/zynqmp/divider.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-) diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c index 57bf381f630d..acdd5e48e147 100644 --- a/drivers/clk/zynqmp/divider.c +++ b/drivers/clk/zynqmp/divider.c @@ -119,10 +119,13 @@ static void zynqmp_get_divider2_val(struct clk_hw *hw, long error = LONG_MAX; unsigned long div1_prate; struct clk_hw *div1_parent_hw; + struct zynqmp_clk_divider *pdivider; struct clk_hw *div2_parent_hw = clk_hw_get_parent(hw); - struct zynqmp_clk_divider *pdivider = - to_zynqmp_clk_divider(div2_parent_hw); + if (!div2_parent_hw) + return; + + pdivider = to_zynqmp_clk_divider(div2_parent_hw); if (!pdivider) return; From e4f4a2cb74479ba729d61e11d0e23162937ab79f Mon Sep 17 00:00:00 2001 From: Jay Buddhabhatti Date: Wed, 29 Nov 2023 03:29:16 -0800 Subject: [PATCH 181/288] drivers: clk: zynqmp: update divider round rate logic [ Upstream commit 1fe15be1fb613534ecbac5f8c3f8744f757d237d ] Currently zynqmp divider round rate is considering single parent and calculating rate and parent rate accordingly. But if divider clock flag is set to SET_RATE_PARENT then its not trying to traverse through all parent rate and not selecting best parent rate from that. So use common divider_round_rate() which is traversing through all clock parents and its rate and calculating proper parent rate. Fixes: 3fde0e16d016 ("drivers: clk: Add ZynqMP clock driver") Signed-off-by: Jay Buddhabhatti Link: https://lore.kernel.org/r/20231129112916.23125-3-jay.buddhabhatti@amd.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin --- drivers/clk/zynqmp/divider.c | 66 +++--------------------------------- 1 file changed, 5 insertions(+), 61 deletions(-) diff --git a/drivers/clk/zynqmp/divider.c b/drivers/clk/zynqmp/divider.c index acdd5e48e147..acfd4878cce2 100644 --- a/drivers/clk/zynqmp/divider.c +++ b/drivers/clk/zynqmp/divider.c @@ -109,52 +109,6 @@ static unsigned long zynqmp_clk_divider_recalc_rate(struct clk_hw *hw, return DIV_ROUND_UP_ULL(parent_rate, value); } -static void zynqmp_get_divider2_val(struct clk_hw *hw, - unsigned long rate, - struct zynqmp_clk_divider *divider, - u32 *bestdiv) -{ - int div1; - int div2; - long error = LONG_MAX; - unsigned long div1_prate; - struct clk_hw *div1_parent_hw; - struct zynqmp_clk_divider *pdivider; - struct clk_hw *div2_parent_hw = clk_hw_get_parent(hw); - - if (!div2_parent_hw) - return; - - pdivider = to_zynqmp_clk_divider(div2_parent_hw); - if (!pdivider) - return; - - div1_parent_hw = clk_hw_get_parent(div2_parent_hw); - if (!div1_parent_hw) - return; - - div1_prate = clk_hw_get_rate(div1_parent_hw); - *bestdiv = 1; - for (div1 = 1; div1 <= pdivider->max_div;) { - for (div2 = 1; div2 <= divider->max_div;) { - long new_error = ((div1_prate / div1) / div2) - rate; - - if (abs(new_error) < abs(error)) { - *bestdiv = div2; - error = new_error; - } - if (divider->flags & CLK_DIVIDER_POWER_OF_TWO) - div2 = div2 << 1; - else - div2++; - } - if (pdivider->flags & CLK_DIVIDER_POWER_OF_TWO) - div1 = div1 << 1; - else - div1++; - } -} - /** * zynqmp_clk_divider_round_rate() - Round rate of divider clock * @hw: handle between common and hardware-specific interfaces @@ -173,6 +127,7 @@ static long zynqmp_clk_divider_round_rate(struct clk_hw *hw, u32 div_type = divider->div_type; u32 bestdiv; int ret; + u8 width; /* if read only, just return current value */ if (divider->flags & CLK_DIVIDER_READ_ONLY) { @@ -192,23 +147,12 @@ static long zynqmp_clk_divider_round_rate(struct clk_hw *hw, return DIV_ROUND_UP_ULL((u64)*prate, bestdiv); } - bestdiv = zynqmp_divider_get_val(*prate, rate, divider->flags); + width = fls(divider->max_div); - /* - * In case of two divisors, compute best divider values and return - * divider2 value based on compute value. div1 will be automatically - * set to optimum based on required total divider value. - */ - if (div_type == TYPE_DIV2 && - (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT)) { - zynqmp_get_divider2_val(hw, rate, divider, &bestdiv); - } + rate = divider_round_rate(hw, rate, prate, NULL, width, divider->flags); - if ((clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && divider->is_frac) - bestdiv = rate % *prate ? 1 : bestdiv; - - bestdiv = min_t(u32, bestdiv, divider->max_div); - *prate = rate * bestdiv; + if (divider->is_frac && (clk_hw_get_flags(hw) & CLK_SET_RATE_PARENT) && (rate % *prate)) + *prate = rate; return rate; } From cbc15095d1ff2075a6a07cd7b783d4d5d5238118 Mon Sep 17 00:00:00 2001 From: Curtis Klein Date: Tue, 5 Dec 2023 11:05:22 -0800 Subject: [PATCH 182/288] watchdog: set cdev owner before adding [ Upstream commit 38d75297745f04206db9c29bdd75557f0344c7cc ] When the new watchdog character device is registered, it becomes available for opening. This creates a race where userspace may open the device before the character device's owner is set. This results in an imbalance in module_get calls as the cdev_get in cdev_open will not increment the reference count on the watchdog driver module. This causes problems when the watchdog character device is released as the module loader's reference will also be released. This makes it impossible to open the watchdog device later on as it now appears that the module is being unloaded. The open will fail with -ENXIO from chrdev_open. The legacy watchdog device will fail with -EBUSY from the try_module_get in watchdog_open because it's module owner is the watchdog core module so it can still be opened but it will fail to get a refcount on the underlying watchdog device driver. Fixes: 72139dfa2464 ("watchdog: Fix the race between the release of watchdog_core_data and cdev") Signed-off-by: Curtis Klein Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20231205190522.55153-1-curtis.klein@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin --- drivers/watchdog/watchdog_dev.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/watchdog/watchdog_dev.c b/drivers/watchdog/watchdog_dev.c index f37255cd75fd..24d0470af81c 100644 --- a/drivers/watchdog/watchdog_dev.c +++ b/drivers/watchdog/watchdog_dev.c @@ -1028,6 +1028,7 @@ static int watchdog_cdev_register(struct watchdog_device *wdd) /* Fill in the data structures */ cdev_init(&wd_data->cdev, &watchdog_fops); + wd_data->cdev.owner = wdd->ops->owner; /* Add the device */ err = cdev_device_add(&wd_data->cdev, &wd_data->dev); @@ -1042,8 +1043,6 @@ static int watchdog_cdev_register(struct watchdog_device *wdd) return err; } - wd_data->cdev.owner = wdd->ops->owner; - /* Record time of most recent heartbeat as 'just before now'. */ wd_data->last_hw_keepalive = ktime_sub(ktime_get(), 1); watchdog_set_open_deadline(wd_data); From 6c93290da90b4fe8861f1ebc0e92af2d1b18eafd Mon Sep 17 00:00:00 2001 From: Jerry Hoemann Date: Wed, 13 Dec 2023 14:53:38 -0700 Subject: [PATCH 183/288] watchdog/hpwdt: Only claim UNKNOWN NMI if from iLO [ Upstream commit dced0b3e51dd2af3730efe14dd86b5e3173f0a65 ] Avoid unnecessary crashes by claiming only NMIs that are due to ERROR signalling or generated by the hpwdt hardware device. The code does this, but only for iLO5. The intent was to preserve legacy, Gen9 and earlier, semantics of using hpwdt for error containtment as hardware/firmware would signal fatal IO errors as an NMI with the expectation of hpwdt crashing the system. Howerver, these IO errors should be received by hpwdt as an NMI_IO_CHECK. So the test is overly permissive and should not be limited to only ilo5. We need to enable this protection for future iLOs not matching the current PCI IDs. Fixes: 62290a5c194b ("watchdog: hpwdt: Claim NMIs generated by iLO5") Signed-off-by: Jerry Hoemann Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20231213215340.495734-2-jerry.hoemann@hpe.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin --- drivers/watchdog/hpwdt.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/watchdog/hpwdt.c b/drivers/watchdog/hpwdt.c index 7d34bcf1c45b..53573c3ddd1a 100644 --- a/drivers/watchdog/hpwdt.c +++ b/drivers/watchdog/hpwdt.c @@ -174,7 +174,7 @@ static int hpwdt_pretimeout(unsigned int ulReason, struct pt_regs *regs) "3. OA Forward Progress Log\n" "4. iLO Event Log"; - if (ilo5 && ulReason == NMI_UNKNOWN && !mynmi) + if (ulReason == NMI_UNKNOWN && !mynmi) return NMI_DONE; if (ilo5 && !pretimeout && !mynmi) From d83662bb9079c8d9fe3c83304def3d155d37caed Mon Sep 17 00:00:00 2001 From: Stefan Wahren Date: Sun, 12 Nov 2023 18:32:51 +0100 Subject: [PATCH 184/288] watchdog: bcm2835_wdt: Fix WDIOC_SETTIMEOUT handling [ Upstream commit f33f5b1fd1be5f5106d16f831309648cb0f1c31d ] Users report about the unexpected behavior for setting timeouts above 15 sec on Raspberry Pi. According to watchdog-api.rst the ioctl WDIOC_SETTIMEOUT shouldn't fail because of hardware limitations. But looking at the code shows that max_timeout based on the register value PM_WDOG_TIME_SET, which is the maximum. Since 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") the watchdog core is able to handle this problem. This fix has been tested with watchdog-test from selftests. Link: https://bugzilla.kernel.org/show_bug.cgi?id=217374 Fixes: 664a39236e71 ("watchdog: Introduce hardware maximum heartbeat in watchdog core") Signed-off-by: Stefan Wahren Reviewed-by: Florian Fainelli Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20231112173251.4827-1-wahrenst@gmx.net Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin --- drivers/watchdog/bcm2835_wdt.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/bcm2835_wdt.c b/drivers/watchdog/bcm2835_wdt.c index dec6ca019bea..3a8dec05b591 100644 --- a/drivers/watchdog/bcm2835_wdt.c +++ b/drivers/watchdog/bcm2835_wdt.c @@ -42,6 +42,7 @@ #define SECS_TO_WDOG_TICKS(x) ((x) << 16) #define WDOG_TICKS_TO_SECS(x) ((x) >> 16) +#define WDOG_TICKS_TO_MSECS(x) ((x) * 1000 >> 16) struct bcm2835_wdt { void __iomem *base; @@ -140,7 +141,7 @@ static struct watchdog_device bcm2835_wdt_wdd = { .info = &bcm2835_wdt_info, .ops = &bcm2835_wdt_ops, .min_timeout = 1, - .max_timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), + .max_hw_heartbeat_ms = WDOG_TICKS_TO_MSECS(PM_WDOG_TIME_SET), .timeout = WDOG_TICKS_TO_SECS(PM_WDOG_TIME_SET), }; From 428381fbcb1f96dc823d6f8b2c52bf650b4c8e57 Mon Sep 17 00:00:00 2001 From: Vignesh Raghavendra Date: Wed, 13 Dec 2023 19:31:10 +0530 Subject: [PATCH 185/288] watchdog: rti_wdt: Drop runtime pm reference count when watchdog is unused [ Upstream commit c1a6edf3b541e44e78f10bc6024df779715723f1 ] Call runtime_pm_put*() if watchdog is not already started during probe and re enable it in watchdog start as required. On K3 SoCs, watchdogs and their corresponding CPUs are under same power-domain, so if the reference count of unused watchdogs aren't dropped, it will lead to CPU hotplug failures as Device Management firmware won't allow to turn off the power-domain due to dangling reference count. Fixes: 2d63908bdbfb ("watchdog: Add K3 RTI watchdog support") Signed-off-by: Vignesh Raghavendra Tested-by: Manorit Chawdhry Reviewed-by: Guenter Roeck Link: https://lore.kernel.org/r/20231213140110.938129-1-vigneshr@ti.com Signed-off-by: Guenter Roeck Signed-off-by: Wim Van Sebroeck Signed-off-by: Sasha Levin --- drivers/watchdog/rti_wdt.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/watchdog/rti_wdt.c b/drivers/watchdog/rti_wdt.c index 46c2a4bd9ebe..daa00f3c5a6a 100644 --- a/drivers/watchdog/rti_wdt.c +++ b/drivers/watchdog/rti_wdt.c @@ -70,6 +70,11 @@ static int rti_wdt_start(struct watchdog_device *wdd) { u32 timer_margin; struct rti_wdt_device *wdt = watchdog_get_drvdata(wdd); + int ret; + + ret = pm_runtime_resume_and_get(wdd->parent); + if (ret) + return ret; /* set timeout period */ timer_margin = (u64)wdd->timeout * wdt->freq; @@ -296,6 +301,9 @@ static int rti_wdt_probe(struct platform_device *pdev) if (last_ping) watchdog_set_last_hw_keepalive(wdd, last_ping); + if (!watchdog_hw_running(wdd)) + pm_runtime_put_sync(&pdev->dev); + return 0; err_iomap: @@ -310,7 +318,10 @@ static int rti_wdt_remove(struct platform_device *pdev) struct rti_wdt_device *wdt = platform_get_drvdata(pdev); watchdog_unregister_device(&wdt->wdd); - pm_runtime_put(&pdev->dev); + + if (!pm_runtime_suspended(&pdev->dev)) + pm_runtime_put(&pdev->dev); + pm_runtime_disable(&pdev->dev); return 0; From e5236e58cc6562a7cd8db1ccc15c0bc1dec84d6f Mon Sep 17 00:00:00 2001 From: Su Hui Date: Wed, 1 Nov 2023 11:16:36 +0800 Subject: [PATCH 186/288] clk: si5341: fix an error code problem in si5341_output_clk_set_rate [ Upstream commit 5607068ae5ab02c3ac9cabc6859d36e98004c341 ] regmap_bulk_write() return zero or negative error code, return the value of regmap_bulk_write() rather than '0'. Fixes: 3044a860fd09 ("clk: Add Si5341/Si5340 driver") Acked-by: Mike Looijmans Signed-off-by: Su Hui Link: https://lore.kernel.org/r/20231101031633.996124-1-suhui@nfschina.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin --- drivers/clk/clk-si5341.c | 4 +--- 1 file changed, 1 insertion(+), 3 deletions(-) diff --git a/drivers/clk/clk-si5341.c b/drivers/clk/clk-si5341.c index 4dea29fa901d..d6515661580c 100644 --- a/drivers/clk/clk-si5341.c +++ b/drivers/clk/clk-si5341.c @@ -888,10 +888,8 @@ static int si5341_output_clk_set_rate(struct clk_hw *hw, unsigned long rate, r[0] = r_div ? (r_div & 0xff) : 1; r[1] = (r_div >> 8) & 0xff; r[2] = (r_div >> 16) & 0xff; - err = regmap_bulk_write(output->data->regmap, + return regmap_bulk_write(output->data->regmap, SI5341_OUT_R_REG(output), r, 3); - - return 0; } static int si5341_output_reparent(struct clk_si5341_output *output, u8 index) From 764b78b927e7eba30b6e6a6dd89434bf79573b28 Mon Sep 17 00:00:00 2001 From: Dmitry Baryshkov Date: Fri, 16 Sep 2022 09:17:39 +0300 Subject: [PATCH 187/288] clk: fixed-rate: add devm_clk_hw_register_fixed_rate [ Upstream commit 1d7d20658534c7d36fe6f4252f6f1a27d9631a99 ] Add devm_clk_hw_register_fixed_rate(), devres-managed helper to register fixed-rate clock. Signed-off-by: Dmitry Baryshkov Link: https://lore.kernel.org/r/20220916061740.87167-3-dmitry.baryshkov@linaro.org Signed-off-by: Stephen Boyd Stable-dep-of: ee0cf5e07f44 ("clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw") Signed-off-by: Sasha Levin --- drivers/clk/clk-fixed-rate.c | 28 ++++++++++++++++++++++++---- include/linux/clk-provider.h | 29 +++++++++++++++++++++-------- 2 files changed, 45 insertions(+), 12 deletions(-) diff --git a/drivers/clk/clk-fixed-rate.c b/drivers/clk/clk-fixed-rate.c index 45501637705c..62e994d18fe2 100644 --- a/drivers/clk/clk-fixed-rate.c +++ b/drivers/clk/clk-fixed-rate.c @@ -49,12 +49,24 @@ const struct clk_ops clk_fixed_rate_ops = { }; EXPORT_SYMBOL_GPL(clk_fixed_rate_ops); +static void devm_clk_hw_register_fixed_rate_release(struct device *dev, void *res) +{ + struct clk_fixed_rate *fix = res; + + /* + * We can not use clk_hw_unregister_fixed_rate, since it will kfree() + * the hw, resulting in double free. Just unregister the hw and let + * devres code kfree() it. + */ + clk_hw_unregister(&fix->hw); +} + struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev, struct device_node *np, const char *name, const char *parent_name, const struct clk_hw *parent_hw, const struct clk_parent_data *parent_data, unsigned long flags, unsigned long fixed_rate, unsigned long fixed_accuracy, - unsigned long clk_fixed_flags) + unsigned long clk_fixed_flags, bool devm) { struct clk_fixed_rate *fixed; struct clk_hw *hw; @@ -62,7 +74,11 @@ struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev, int ret = -EINVAL; /* allocate fixed-rate clock */ - fixed = kzalloc(sizeof(*fixed), GFP_KERNEL); + if (devm) + fixed = devres_alloc(devm_clk_hw_register_fixed_rate_release, + sizeof(*fixed), GFP_KERNEL); + else + fixed = kzalloc(sizeof(*fixed), GFP_KERNEL); if (!fixed) return ERR_PTR(-ENOMEM); @@ -90,9 +106,13 @@ struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev, else if (np) ret = of_clk_hw_register(np, hw); if (ret) { - kfree(fixed); + if (devm) + devres_free(fixed); + else + kfree(fixed); hw = ERR_PTR(ret); - } + } else if (devm) + devres_add(dev, fixed); return hw; } diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index aa8cbf882914..76f02b214f39 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -350,7 +350,7 @@ struct clk_hw *__clk_hw_register_fixed_rate(struct device *dev, const char *parent_name, const struct clk_hw *parent_hw, const struct clk_parent_data *parent_data, unsigned long flags, unsigned long fixed_rate, unsigned long fixed_accuracy, - unsigned long clk_fixed_flags); + unsigned long clk_fixed_flags, bool devm); struct clk *clk_register_fixed_rate(struct device *dev, const char *name, const char *parent_name, unsigned long flags, unsigned long fixed_rate); @@ -365,7 +365,20 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, */ #define clk_hw_register_fixed_rate(dev, name, parent_name, flags, fixed_rate) \ __clk_hw_register_fixed_rate((dev), NULL, (name), (parent_name), NULL, \ - NULL, (flags), (fixed_rate), 0, 0) + NULL, (flags), (fixed_rate), 0, 0, false) + +/** + * devm_clk_hw_register_fixed_rate - register fixed-rate clock with the clock + * framework + * @dev: device that is registering this clock + * @name: name of this clock + * @parent_name: name of clock's parent + * @flags: framework-specific flags + * @fixed_rate: non-adjustable clock rate + */ +#define devm_clk_hw_register_fixed_rate(dev, name, parent_name, flags, fixed_rate) \ + __clk_hw_register_fixed_rate((dev), NULL, (name), (parent_name), NULL, \ + NULL, (flags), (fixed_rate), 0, 0, true) /** * clk_hw_register_fixed_rate_parent_hw - register fixed-rate clock with * the clock framework @@ -378,7 +391,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, #define clk_hw_register_fixed_rate_parent_hw(dev, name, parent_hw, flags, \ fixed_rate) \ __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, (parent_hw), \ - NULL, (flags), (fixed_rate), 0, 0) + NULL, (flags), (fixed_rate), 0, 0, false) /** * clk_hw_register_fixed_rate_parent_data - register fixed-rate clock with * the clock framework @@ -392,7 +405,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, fixed_rate) \ __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, NULL, \ (parent_data), (flags), (fixed_rate), 0, \ - 0) + 0, false) /** * clk_hw_register_fixed_rate_with_accuracy - register fixed-rate clock with * the clock framework @@ -408,7 +421,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, fixed_accuracy) \ __clk_hw_register_fixed_rate((dev), NULL, (name), (parent_name), \ NULL, NULL, (flags), (fixed_rate), \ - (fixed_accuracy), 0) + (fixed_accuracy), 0, false) /** * clk_hw_register_fixed_rate_with_accuracy_parent_hw - register fixed-rate * clock with the clock framework @@ -423,7 +436,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, parent_hw, flags, fixed_rate, fixed_accuracy) \ __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, (parent_hw) \ NULL, NULL, (flags), (fixed_rate), \ - (fixed_accuracy), 0) + (fixed_accuracy), 0, false) /** * clk_hw_register_fixed_rate_with_accuracy_parent_data - register fixed-rate * clock with the clock framework @@ -438,7 +451,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, parent_data, flags, fixed_rate, fixed_accuracy) \ __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, NULL, \ (parent_data), NULL, (flags), \ - (fixed_rate), (fixed_accuracy), 0) + (fixed_rate), (fixed_accuracy), 0, false) /** * clk_hw_register_fixed_rate_parent_accuracy - register fixed-rate clock with * the clock framework @@ -452,7 +465,7 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, flags, fixed_rate) \ __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, NULL, \ (parent_data), (flags), (fixed_rate), 0, \ - CLK_FIXED_RATE_PARENT_ACCURACY) + CLK_FIXED_RATE_PARENT_ACCURACY, false) void clk_unregister_fixed_rate(struct clk *clk); void clk_hw_unregister_fixed_rate(struct clk_hw *hw); From bed5ec2a5984cecf1533c8faa1684c4cccfef92a Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Th=C3=A9o=20Lebrun?= Date: Mon, 18 Dec 2023 18:14:16 +0100 Subject: [PATCH 188/288] clk: fixed-rate: fix clk_hw_register_fixed_rate_with_accuracy_parent_hw MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit ee0cf5e07f44a10fce8f1bfa9db226c0b5ecf880 ] Add missing comma and remove extraneous NULL argument. The macro is currently used by no one which explains why the typo slipped by. Fixes: 2d34f09e79c9 ("clk: fixed-rate: Add support for specifying parents via DT/pointers") Signed-off-by: Théo Lebrun Link: https://lore.kernel.org/r/20231218-mbly-clk-v1-1-44ce54108f06@bootlin.com Signed-off-by: Stephen Boyd Signed-off-by: Sasha Levin --- include/linux/clk-provider.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/include/linux/clk-provider.h b/include/linux/clk-provider.h index 76f02b214f39..6fa85be64b89 100644 --- a/include/linux/clk-provider.h +++ b/include/linux/clk-provider.h @@ -434,8 +434,8 @@ struct clk *clk_register_fixed_rate(struct device *dev, const char *name, */ #define clk_hw_register_fixed_rate_with_accuracy_parent_hw(dev, name, \ parent_hw, flags, fixed_rate, fixed_accuracy) \ - __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, (parent_hw) \ - NULL, NULL, (flags), (fixed_rate), \ + __clk_hw_register_fixed_rate((dev), NULL, (name), NULL, (parent_hw), \ + NULL, (flags), (fixed_rate), \ (fixed_accuracy), 0, false) /** * clk_hw_register_fixed_rate_with_accuracy_parent_data - register fixed-rate From 5af4ce2a543d32d3ba5f5cba960e71c2fcc41d40 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 2 Dec 2022 19:35:18 +0100 Subject: [PATCH 189/288] pwm: stm32: Use regmap_clear_bits and regmap_set_bits where applicable MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 632ae5d7eb348b3ef88552ec0999260b6f9d6ab1 ] Found using coccinelle and the following semantic patch: @@ expression map, reg, bits; @@ - regmap_update_bits(map, reg, bits, bits) + regmap_set_bits(map, reg, bits) @@ expression map, reg, bits; @@ - regmap_update_bits(map, reg, bits, 0) + regmap_clear_bits(map, reg, bits) Tested-by: Fabrice Gasnier Link: https://lore.kernel.org/r/20221115111347.3705732-6-u.kleine-koenig@pengutronix.de Signed-off-by: Uwe Kleine-König Signed-off-by: Thierry Reding Stable-dep-of: 19f1016ea960 ("pwm: stm32: Fix enable count for clk in .probe()") Signed-off-by: Sasha Levin --- drivers/pwm/pwm-stm32.c | 34 ++++++++++++++++------------------ 1 file changed, 16 insertions(+), 18 deletions(-) diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c index d3be944f2ae9..945eed3ffb81 100644 --- a/drivers/pwm/pwm-stm32.c +++ b/drivers/pwm/pwm-stm32.c @@ -115,14 +115,14 @@ static int stm32_pwm_raw_capture(struct stm32_pwm *priv, struct pwm_device *pwm, int ret; /* Ensure registers have been updated, enable counter and capture */ - regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN); + regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG); + regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); /* Use cc1 or cc3 DMA resp for PWM input channels 1 & 2 or 3 & 4 */ dma_id = pwm->hwpwm < 2 ? STM32_TIMERS_DMA_CH1 : STM32_TIMERS_DMA_CH3; ccen = pwm->hwpwm < 2 ? TIM_CCER_CC12E : TIM_CCER_CC34E; ccr = pwm->hwpwm < 2 ? TIM_CCR1 : TIM_CCR3; - regmap_update_bits(priv->regmap, TIM_CCER, ccen, ccen); + regmap_set_bits(priv->regmap, TIM_CCER, ccen); /* * Timer DMA burst mode. Request 2 registers, 2 bursts, to get both @@ -160,8 +160,8 @@ static int stm32_pwm_raw_capture(struct stm32_pwm *priv, struct pwm_device *pwm, } stop: - regmap_update_bits(priv->regmap, TIM_CCER, ccen, 0); - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); + regmap_clear_bits(priv->regmap, TIM_CCER, ccen); + regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); return ret; } @@ -359,7 +359,7 @@ static int stm32_pwm_config(struct stm32_pwm *priv, int ch, regmap_write(priv->regmap, TIM_PSC, prescaler); regmap_write(priv->regmap, TIM_ARR, prd - 1); - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE, TIM_CR1_ARPE); + regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_ARPE); /* Calculate the duty cycles */ dty = prd * duty_ns; @@ -377,7 +377,7 @@ static int stm32_pwm_config(struct stm32_pwm *priv, int ch, else regmap_update_bits(priv->regmap, TIM_CCMR2, mask, ccmr); - regmap_update_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE, TIM_BDTR_MOE); + regmap_set_bits(priv->regmap, TIM_BDTR, TIM_BDTR_MOE); return 0; } @@ -411,13 +411,13 @@ static int stm32_pwm_enable(struct stm32_pwm *priv, int ch) if (priv->have_complementary_output) mask |= TIM_CCER_CC1NE << (ch * 4); - regmap_update_bits(priv->regmap, TIM_CCER, mask, mask); + regmap_set_bits(priv->regmap, TIM_CCER, mask); /* Make sure that registers are updated */ - regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG); + regmap_set_bits(priv->regmap, TIM_EGR, TIM_EGR_UG); /* Enable controller */ - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, TIM_CR1_CEN); + regmap_set_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); return 0; } @@ -431,11 +431,11 @@ static void stm32_pwm_disable(struct stm32_pwm *priv, int ch) if (priv->have_complementary_output) mask |= TIM_CCER_CC1NE << (ch * 4); - regmap_update_bits(priv->regmap, TIM_CCER, mask, 0); + regmap_clear_bits(priv->regmap, TIM_CCER, mask); /* When all channels are disabled, we can disable the controller */ if (!active_channels(priv)) - regmap_update_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN, 0); + regmap_clear_bits(priv->regmap, TIM_CR1, TIM_CR1_CEN); clk_disable(priv->clk); } @@ -568,10 +568,9 @@ static void stm32_pwm_detect_complementary(struct stm32_pwm *priv) * If complementary bit doesn't exist writing 1 will have no * effect so we can detect it. */ - regmap_update_bits(priv->regmap, - TIM_CCER, TIM_CCER_CC1NE, TIM_CCER_CC1NE); + regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE); regmap_read(priv->regmap, TIM_CCER, &ccer); - regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE, 0); + regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CC1NE); priv->have_complementary_output = (ccer != 0); } @@ -585,10 +584,9 @@ static int stm32_pwm_detect_channels(struct stm32_pwm *priv) * If channels enable bits don't exist writing 1 will have no * effect so we can detect and count them. */ - regmap_update_bits(priv->regmap, - TIM_CCER, TIM_CCER_CCXE, TIM_CCER_CCXE); + regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE); regmap_read(priv->regmap, TIM_CCER, &ccer); - regmap_update_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE, 0); + regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE); if (ccer & TIM_CCER_CC1E) npwm++; From e33e1bdbe66ae7f8cdef6a8ede4a1b0a70eb2ef3 Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 19 Oct 2023 22:07:02 +0200 Subject: [PATCH 190/288] pwm: stm32: Use hweight32 in stm32_pwm_detect_channels MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 41fa8f57c0d269243fe3bde2bce71e82c884b9ad ] Use hweight32() to count the CCxE bits in stm32_pwm_detect_channels(). Since the return value is assigned to chip.npwm, change it to unsigned int as well. Signed-off-by: Philipp Zabel Signed-off-by: Uwe Kleine-König Reviewed-by: Fabrice Gasnier Signed-off-by: Thierry Reding Stable-dep-of: 19f1016ea960 ("pwm: stm32: Fix enable count for clk in .probe()") Signed-off-by: Sasha Levin --- drivers/pwm/pwm-stm32.c | 17 ++--------------- 1 file changed, 2 insertions(+), 15 deletions(-) diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c index 945eed3ffb81..31843cc4ca76 100644 --- a/drivers/pwm/pwm-stm32.c +++ b/drivers/pwm/pwm-stm32.c @@ -575,10 +575,9 @@ static void stm32_pwm_detect_complementary(struct stm32_pwm *priv) priv->have_complementary_output = (ccer != 0); } -static int stm32_pwm_detect_channels(struct stm32_pwm *priv) +static unsigned int stm32_pwm_detect_channels(struct stm32_pwm *priv) { u32 ccer; - int npwm = 0; /* * If channels enable bits don't exist writing 1 will have no @@ -588,19 +587,7 @@ static int stm32_pwm_detect_channels(struct stm32_pwm *priv) regmap_read(priv->regmap, TIM_CCER, &ccer); regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE); - if (ccer & TIM_CCER_CC1E) - npwm++; - - if (ccer & TIM_CCER_CC2E) - npwm++; - - if (ccer & TIM_CCER_CC3E) - npwm++; - - if (ccer & TIM_CCER_CC4E) - npwm++; - - return npwm; + return hweight32(ccer & TIM_CCER_CCXE); } static int stm32_pwm_probe(struct platform_device *pdev) From 8da3a51f74e15a19eb80dcf08ef4979cb06b5a6e Mon Sep 17 00:00:00 2001 From: Philipp Zabel Date: Thu, 19 Oct 2023 22:07:04 +0200 Subject: [PATCH 191/288] pwm: stm32: Fix enable count for clk in .probe() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 19f1016ea9600ed89bc24247c36ff5934ad94fbb ] Make the driver take over hardware state without disabling in .probe() and enable the clock for each enabled channel. Signed-off-by: Philipp Zabel [ukleinek: split off from a patch that also implemented .get_state()] Signed-off-by: Uwe Kleine-König Fixes: 7edf7369205b ("pwm: Add driver for STM32 plaftorm") Reviewed-by: Fabrice Gasnier Signed-off-by: Thierry Reding Signed-off-by: Sasha Levin --- drivers/pwm/pwm-stm32.c | 18 ++++++++++++++---- 1 file changed, 14 insertions(+), 4 deletions(-) diff --git a/drivers/pwm/pwm-stm32.c b/drivers/pwm/pwm-stm32.c index 31843cc4ca76..69b7bc604946 100644 --- a/drivers/pwm/pwm-stm32.c +++ b/drivers/pwm/pwm-stm32.c @@ -575,17 +575,21 @@ static void stm32_pwm_detect_complementary(struct stm32_pwm *priv) priv->have_complementary_output = (ccer != 0); } -static unsigned int stm32_pwm_detect_channels(struct stm32_pwm *priv) +static unsigned int stm32_pwm_detect_channels(struct stm32_pwm *priv, + unsigned int *num_enabled) { - u32 ccer; + u32 ccer, ccer_backup; /* * If channels enable bits don't exist writing 1 will have no * effect so we can detect and count them. */ + regmap_read(priv->regmap, TIM_CCER, &ccer_backup); regmap_set_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE); regmap_read(priv->regmap, TIM_CCER, &ccer); - regmap_clear_bits(priv->regmap, TIM_CCER, TIM_CCER_CCXE); + regmap_write(priv->regmap, TIM_CCER, ccer_backup); + + *num_enabled = hweight32(ccer_backup & TIM_CCER_CCXE); return hweight32(ccer & TIM_CCER_CCXE); } @@ -596,6 +600,8 @@ static int stm32_pwm_probe(struct platform_device *pdev) struct device_node *np = dev->of_node; struct stm32_timers *ddata = dev_get_drvdata(pdev->dev.parent); struct stm32_pwm *priv; + unsigned int num_enabled; + unsigned int i; int ret; priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); @@ -621,7 +627,11 @@ static int stm32_pwm_probe(struct platform_device *pdev) priv->chip.base = -1; priv->chip.dev = dev; priv->chip.ops = &stm32pwm_ops; - priv->chip.npwm = stm32_pwm_detect_channels(priv); + priv->chip.npwm = stm32_pwm_detect_channels(priv, &num_enabled); + + /* Initialize clock refcount to number of enabled PWM channels. */ + for (i = 0; i < num_enabled; i++) + clk_enable(priv->clk); ret = pwmchip_add(&priv->chip); if (ret < 0) From 613af7d576220b9234f18a4b58d5f02bf4a9c9a8 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Wed, 20 Dec 2023 13:59:46 +0000 Subject: [PATCH 192/288] mmc: sdhci_am654: Fix TI SoC dependencies [ Upstream commit cb052da7f031b0d2309a4895ca236afb3b4bbf50 ] The sdhci_am654 is specific to recent TI SoCs, update the dependencies for those SoCs and compile testing. While we're at it update the text to reflect the wider range of supported TI SoCS the driver now supports. Fixes: 41fd4caeb00b ("mmc: sdhci_am654: Add Initial Support for AM654 SDHCI driver") Signed-off-by: Peter Robinson Link: https://lore.kernel.org/r/20231220135950.433588-1-pbrobinson@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin --- drivers/mmc/host/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index a5b2bf0e40cc..1b12c9fa3048 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -1080,14 +1080,15 @@ config MMC_SDHCI_OMAP config MMC_SDHCI_AM654 tristate "Support for the SDHCI Controller in TI's AM654 SOCs" + depends on ARCH_K3 || COMPILE_TEST depends on MMC_SDHCI_PLTFM && OF select MMC_SDHCI_IO_ACCESSORS select MMC_CQHCI select REGMAP_MMIO help This selects the Secure Digital Host Controller Interface (SDHCI) - support present in TI's AM654 SOCs. The controller supports - SD/MMC/SDIO devices. + support present in TI's AM65x/AM64x/AM62x/J721E SOCs. The controller + supports SD/MMC/SDIO devices. If you have a controller with this interface, say Y or M here. From bedecbb5a5fce1f70d4ef5753d11bd524ad62906 Mon Sep 17 00:00:00 2001 From: Peter Robinson Date: Wed, 20 Dec 2023 13:59:47 +0000 Subject: [PATCH 193/288] mmc: sdhci_omap: Fix TI SoC dependencies [ Upstream commit 09f164d393a6671e5ff8342ba6b3cb7fe3f20208 ] The sdhci_omap is specific to older TI SoCs, update the dependencies for those SoCs and compile testing. While we're at it update the text to reflect the wider range of supported TI SoCS the driver now supports. Fixes: 7d326930d352 ("mmc: sdhci-omap: Add OMAP SDHCI driver") Signed-off-by: Peter Robinson Link: https://lore.kernel.org/r/20231220135950.433588-2-pbrobinson@gmail.com Signed-off-by: Ulf Hansson Signed-off-by: Sasha Levin --- drivers/mmc/host/Kconfig | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index 1b12c9fa3048..8fe4a0fd6ef1 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -1065,14 +1065,15 @@ config MMC_SDHCI_XENON config MMC_SDHCI_OMAP tristate "TI SDHCI Controller Support" + depends on ARCH_OMAP2PLUS || ARCH_KEYSTONE || COMPILE_TEST depends on MMC_SDHCI_PLTFM && OF select THERMAL imply TI_SOC_THERMAL select MMC_SDHCI_EXTERNAL_DMA if DMA_ENGINE help This selects the Secure Digital Host Controller Interface (SDHCI) - support present in TI's DRA7 SOCs. The controller supports - SD/MMC/SDIO devices. + support present in TI's Keystone/OMAP2+/DRA7 SOCs. The controller + supports SD/MMC/SDIO devices. If you have a controller with this interface, say Y or M here. From c9ee325baed10ba79aec2cf3bcfc18e11c9caf49 Mon Sep 17 00:00:00 2001 From: Sergey Gorenko Date: Tue, 19 Dec 2023 09:23:11 +0200 Subject: [PATCH 194/288] IB/iser: Prevent invalidating wrong MR [ Upstream commit 2f1888281e67205bd80d3e8f54dbd519a9653f26 ] The iser_reg_resources structure has two pointers to MR but only one mr_valid field. The implementation assumes that we use only *sig_mr when pi_enable is true. Otherwise, we use only *mr. However, it is only sometimes correct. Read commands without protection information occur even when pi_enble is true. For example, the following SCSI commands have a Data-In buffer but never have protection information: READ CAPACITY (16), INQUIRY, MODE SENSE(6), MAINTENANCE IN. So, we use *sig_mr for some SCSI commands and *mr for the other SCSI commands. In most cases, it works fine because the remote invalidation is applied. However, there are two cases when the remote invalidation is not applicable. 1. Small write commands when all data is sent as an immediate. 2. The target does not support the remote invalidation feature. The lazy invalidation is used if the remote invalidation is impossible. Since, at the lazy invalidation, we always invalidate the MR we want to use, the wrong MR may be invalidated. To fix the issue, we need a field per MR that indicates the MR needs invalidation. Since the ib_mr structure already has such a field, let's use ib_mr.need_inval instead of iser_reg_resources.mr_valid. Fixes: b76a439982f8 ("IB/iser: Use IB_WR_REG_MR_INTEGRITY for PI handover") Link: https://lore.kernel.org/r/20231219072311.40989-1-sergeygo@nvidia.com Acked-by: Max Gurtovoy Signed-off-by: Sergey Gorenko Signed-off-by: Jason Gunthorpe Signed-off-by: Sasha Levin --- drivers/infiniband/ulp/iser/iscsi_iser.h | 2 -- drivers/infiniband/ulp/iser/iser_initiator.c | 5 ++++- drivers/infiniband/ulp/iser/iser_memory.c | 8 ++++---- drivers/infiniband/ulp/iser/iser_verbs.c | 1 - 4 files changed, 8 insertions(+), 8 deletions(-) diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.h b/drivers/infiniband/ulp/iser/iscsi_iser.h index 78ee9445f801..45a2d2b82b09 100644 --- a/drivers/infiniband/ulp/iser/iscsi_iser.h +++ b/drivers/infiniband/ulp/iser/iscsi_iser.h @@ -322,12 +322,10 @@ struct iser_device { * * @mr: memory region * @sig_mr: signature memory region - * @mr_valid: is mr valid indicator */ struct iser_reg_resources { struct ib_mr *mr; struct ib_mr *sig_mr; - u8 mr_valid:1; }; /** diff --git a/drivers/infiniband/ulp/iser/iser_initiator.c b/drivers/infiniband/ulp/iser/iser_initiator.c index 27a6f75a9912..9ea88dd6a414 100644 --- a/drivers/infiniband/ulp/iser/iser_initiator.c +++ b/drivers/infiniband/ulp/iser/iser_initiator.c @@ -602,7 +602,10 @@ iser_inv_desc(struct iser_fr_desc *desc, u32 rkey) return -EINVAL; } - desc->rsc.mr_valid = 0; + if (desc->sig_protected) + desc->rsc.sig_mr->need_inval = false; + else + desc->rsc.mr->need_inval = false; return 0; } diff --git a/drivers/infiniband/ulp/iser/iser_memory.c b/drivers/infiniband/ulp/iser/iser_memory.c index d4e057fac219..519fea5ec3a1 100644 --- a/drivers/infiniband/ulp/iser/iser_memory.c +++ b/drivers/infiniband/ulp/iser/iser_memory.c @@ -250,7 +250,7 @@ iser_reg_sig_mr(struct iscsi_iser_task *iser_task, iser_set_prot_checks(iser_task->sc, &sig_attrs->check_mask); - if (rsc->mr_valid) + if (rsc->sig_mr->need_inval) iser_inv_rkey(&tx_desc->inv_wr, mr, cqe, &wr->wr); ib_update_fast_reg_key(mr, ib_inc_rkey(mr->rkey)); @@ -274,7 +274,7 @@ iser_reg_sig_mr(struct iscsi_iser_task *iser_task, wr->access = IB_ACCESS_LOCAL_WRITE | IB_ACCESS_REMOTE_READ | IB_ACCESS_REMOTE_WRITE; - rsc->mr_valid = 1; + rsc->sig_mr->need_inval = true; sig_reg->sge.lkey = mr->lkey; sig_reg->rkey = mr->rkey; @@ -299,7 +299,7 @@ static int iser_fast_reg_mr(struct iscsi_iser_task *iser_task, struct ib_reg_wr *wr = &tx_desc->reg_wr; int n; - if (rsc->mr_valid) + if (rsc->mr->need_inval) iser_inv_rkey(&tx_desc->inv_wr, mr, cqe, &wr->wr); ib_update_fast_reg_key(mr, ib_inc_rkey(mr->rkey)); @@ -322,7 +322,7 @@ static int iser_fast_reg_mr(struct iscsi_iser_task *iser_task, IB_ACCESS_REMOTE_WRITE | IB_ACCESS_REMOTE_READ; - rsc->mr_valid = 1; + rsc->mr->need_inval = true; reg->sge.lkey = mr->lkey; reg->rkey = mr->rkey; diff --git a/drivers/infiniband/ulp/iser/iser_verbs.c b/drivers/infiniband/ulp/iser/iser_verbs.c index 2bd18b006893..b5127479860d 100644 --- a/drivers/infiniband/ulp/iser/iser_verbs.c +++ b/drivers/infiniband/ulp/iser/iser_verbs.c @@ -136,7 +136,6 @@ iser_create_fastreg_desc(struct iser_device *device, goto err_alloc_mr_integrity; } } - desc->rsc.mr_valid = 0; return desc; From d5f490343c77e6708b6c4aa7dbbfbcbb9546adea Mon Sep 17 00:00:00 2001 From: "Christian A. Ehrhardt" Date: Fri, 29 Dec 2023 11:54:11 +0100 Subject: [PATCH 195/288] of: Fix double free in of_parse_phandle_with_args_map [ Upstream commit 4dde83569832f9377362e50f7748463340c5db6b ] In of_parse_phandle_with_args_map() the inner loop that iterates through the map entries calls of_node_put(new) to free the reference acquired by the previous iteration of the inner loop. This assumes that the value of "new" is NULL on the first iteration of the inner loop. Make sure that this is true in all iterations of the outer loop by setting "new" to NULL after its value is assigned to "cur". Extend the unittest to detect the double free and add an additional test case that actually triggers this path. Fixes: bd6f2fd5a1 ("of: Support parsing phandle argument lists through a nexus node") Cc: Stephen Boyd Signed-off-by: "Christian A. Ehrhardt" Link: https://lore.kernel.org/r/20231229105411.1603434-1-lk@c--e.de Signed-off-by: Rob Herring Signed-off-by: Sasha Levin --- drivers/of/base.c | 1 + drivers/of/unittest-data/tests-phandle.dtsi | 10 ++- drivers/of/unittest.c | 74 ++++++++++++--------- 3 files changed, 53 insertions(+), 32 deletions(-) diff --git a/drivers/of/base.c b/drivers/of/base.c index eb02974f36bd..0e428880d88b 100644 --- a/drivers/of/base.c +++ b/drivers/of/base.c @@ -1670,6 +1670,7 @@ int of_parse_phandle_with_args_map(const struct device_node *np, out_args->np = new; of_node_put(cur); cur = new; + new = NULL; } put: of_node_put(cur); diff --git a/drivers/of/unittest-data/tests-phandle.dtsi b/drivers/of/unittest-data/tests-phandle.dtsi index 6b33be4c4416..aa0d7027ffa6 100644 --- a/drivers/of/unittest-data/tests-phandle.dtsi +++ b/drivers/of/unittest-data/tests-phandle.dtsi @@ -38,6 +38,13 @@ provider4: provider4 { phandle-map-pass-thru = <0x0 0xf0>; }; + provider5: provider5 { + #phandle-cells = <2>; + phandle-map = <2 7 &provider4 2 3>; + phandle-map-mask = <0xff 0xf>; + phandle-map-pass-thru = <0x0 0xf0>; + }; + consumer-a { phandle-list = <&provider1 1>, <&provider2 2 0>, @@ -64,7 +71,8 @@ consumer-b { <&provider4 4 0x100>, <&provider4 0 0x61>, <&provider0>, - <&provider4 19 0x20>; + <&provider4 19 0x20>, + <&provider5 2 7>; phandle-list-bad-phandle = <12345678 0 0>; phandle-list-bad-args = <&provider2 1 0>, <&provider4 0>; diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 412d7ddb3b8b..197abe33b65c 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -447,6 +447,9 @@ static void __init of_unittest_parse_phandle_with_args(void) unittest(passed, "index %i - data error on node %pOF rc=%i\n", i, args.np, rc); + + if (rc == 0) + of_node_put(args.np); } /* Check for missing list property */ @@ -536,8 +539,9 @@ static void __init of_unittest_parse_phandle_with_args(void) static void __init of_unittest_parse_phandle_with_args_map(void) { - struct device_node *np, *p0, *p1, *p2, *p3; + struct device_node *np, *p[6] = {}; struct of_phandle_args args; + unsigned int prefs[6]; int i, rc; np = of_find_node_by_path("/testcase-data/phandle-tests/consumer-b"); @@ -546,34 +550,24 @@ static void __init of_unittest_parse_phandle_with_args_map(void) return; } - p0 = of_find_node_by_path("/testcase-data/phandle-tests/provider0"); - if (!p0) { - pr_err("missing testcase data\n"); - return; - } - - p1 = of_find_node_by_path("/testcase-data/phandle-tests/provider1"); - if (!p1) { - pr_err("missing testcase data\n"); - return; - } - - p2 = of_find_node_by_path("/testcase-data/phandle-tests/provider2"); - if (!p2) { - pr_err("missing testcase data\n"); - return; - } - - p3 = of_find_node_by_path("/testcase-data/phandle-tests/provider3"); - if (!p3) { - pr_err("missing testcase data\n"); - return; + p[0] = of_find_node_by_path("/testcase-data/phandle-tests/provider0"); + p[1] = of_find_node_by_path("/testcase-data/phandle-tests/provider1"); + p[2] = of_find_node_by_path("/testcase-data/phandle-tests/provider2"); + p[3] = of_find_node_by_path("/testcase-data/phandle-tests/provider3"); + p[4] = of_find_node_by_path("/testcase-data/phandle-tests/provider4"); + p[5] = of_find_node_by_path("/testcase-data/phandle-tests/provider5"); + for (i = 0; i < ARRAY_SIZE(p); ++i) { + if (!p[i]) { + pr_err("missing testcase data\n"); + return; + } + prefs[i] = kref_read(&p[i]->kobj.kref); } rc = of_count_phandle_with_args(np, "phandle-list", "#phandle-cells"); - unittest(rc == 7, "of_count_phandle_with_args() returned %i, expected 7\n", rc); + unittest(rc == 8, "of_count_phandle_with_args() returned %i, expected 7\n", rc); - for (i = 0; i < 8; i++) { + for (i = 0; i < 9; i++) { bool passed = true; memset(&args, 0, sizeof(args)); @@ -584,13 +578,13 @@ static void __init of_unittest_parse_phandle_with_args_map(void) switch (i) { case 0: passed &= !rc; - passed &= (args.np == p1); + passed &= (args.np == p[1]); passed &= (args.args_count == 1); passed &= (args.args[0] == 1); break; case 1: passed &= !rc; - passed &= (args.np == p3); + passed &= (args.np == p[3]); passed &= (args.args_count == 3); passed &= (args.args[0] == 2); passed &= (args.args[1] == 5); @@ -601,28 +595,36 @@ static void __init of_unittest_parse_phandle_with_args_map(void) break; case 3: passed &= !rc; - passed &= (args.np == p0); + passed &= (args.np == p[0]); passed &= (args.args_count == 0); break; case 4: passed &= !rc; - passed &= (args.np == p1); + passed &= (args.np == p[1]); passed &= (args.args_count == 1); passed &= (args.args[0] == 3); break; case 5: passed &= !rc; - passed &= (args.np == p0); + passed &= (args.np == p[0]); passed &= (args.args_count == 0); break; case 6: passed &= !rc; - passed &= (args.np == p2); + passed &= (args.np == p[2]); passed &= (args.args_count == 2); passed &= (args.args[0] == 15); passed &= (args.args[1] == 0x20); break; case 7: + passed &= !rc; + passed &= (args.np == p[3]); + passed &= (args.args_count == 3); + passed &= (args.args[0] == 2); + passed &= (args.args[1] == 5); + passed &= (args.args[2] == 3); + break; + case 8: passed &= (rc == -ENOENT); break; default: @@ -631,6 +633,9 @@ static void __init of_unittest_parse_phandle_with_args_map(void) unittest(passed, "index %i - data error on node %s rc=%i\n", i, args.np->full_name, rc); + + if (rc == 0) + of_node_put(args.np); } /* Check for missing list property */ @@ -677,6 +682,13 @@ static void __init of_unittest_parse_phandle_with_args_map(void) "OF: /testcase-data/phandle-tests/consumer-b: #phandle-cells = 2 found -1"); unittest(rc == -EINVAL, "expected:%i got:%i\n", -EINVAL, rc); + + for (i = 0; i < ARRAY_SIZE(p); ++i) { + unittest(prefs[i] == kref_read(&p[i]->kobj.kref), + "provider%d: expected:%d got:%d\n", + i, prefs[i], kref_read(&p[i]->kobj.kref)); + of_node_put(p[i]); + } } static void __init of_unittest_property_string(void) From 9e8a31c1aa4a9493766168695e830f3cca2415a2 Mon Sep 17 00:00:00 2001 From: Geert Uytterhoeven Date: Thu, 11 Jan 2024 09:50:25 +0100 Subject: [PATCH 196/288] of: unittest: Fix of_count_phandle_with_args() expected value message [ Upstream commit 716089b417cf98d01f0dc1b39f9c47e1d7b4c965 ] The expected result value for the call to of_count_phandle_with_args() was updated from 7 to 8, but the accompanying error message was forgotten. Fixes: 4dde83569832f937 ("of: Fix double free in of_parse_phandle_with_args_map") Signed-off-by: Geert Uytterhoeven Link: https://lore.kernel.org/r/20240111085025.2073894-1-geert+renesas@glider.be Signed-off-by: Rob Herring Signed-off-by: Sasha Levin --- drivers/of/unittest.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/of/unittest.c b/drivers/of/unittest.c index 197abe33b65c..f9083c868a36 100644 --- a/drivers/of/unittest.c +++ b/drivers/of/unittest.c @@ -565,7 +565,7 @@ static void __init of_unittest_parse_phandle_with_args_map(void) } rc = of_count_phandle_with_args(np, "phandle-list", "#phandle-cells"); - unittest(rc == 8, "of_count_phandle_with_args() returned %i, expected 7\n", rc); + unittest(rc == 8, "of_count_phandle_with_args() returned %i, expected 8\n", rc); for (i = 0; i < 9; i++) { bool passed = true; From 4533e7623e6d206a6d8e67c9f8d242dd022accbb Mon Sep 17 00:00:00 2001 From: David Howells Date: Wed, 10 Jan 2024 21:11:40 +0000 Subject: [PATCH 197/288] keys, dns: Fix size check of V1 server-list header commit acc657692aed438e9931438f8c923b2b107aebf9 upstream. Fix the size check added to dns_resolver_preparse() for the V1 server-list header so that it doesn't give EINVAL if the size supplied is the same as the size of the header struct (which should be valid). This can be tested with: echo -n -e '\0\0\01\xff\0\0' | keyctl padd dns_resolver desc @p which will give "add_key: Invalid argument" without this fix. Fixes: 1997b3cb4217 ("keys, dns: Fix missing size check of V1 server-list header") Reported-by: Pengfei Xu Link: https://lore.kernel.org/r/ZZ4fyY4r3rqgZL+4@xpf.sh.intel.com/ Signed-off-by: David Howells Signed-off-by: Linus Torvalds Cc: Petr Vorel Signed-off-by: Greg Kroah-Hartman --- net/dns_resolver/dns_key.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/dns_resolver/dns_key.c b/net/dns_resolver/dns_key.c index 8324e9f97066..26a9d8434c23 100644 --- a/net/dns_resolver/dns_key.c +++ b/net/dns_resolver/dns_key.c @@ -104,7 +104,7 @@ dns_resolver_preparse(struct key_preparsed_payload *prep) const struct dns_server_list_v1_header *v1; /* It may be a server list. */ - if (datalen <= sizeof(*v1)) + if (datalen < sizeof(*v1)) return -EINVAL; v1 = (const struct dns_server_list_v1_header *)data; From fa62c9050e9ddd06b5334574151192afc3d06771 Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Fri, 1 Dec 2023 17:21:33 +0000 Subject: [PATCH 198/288] binder: fix async space check for 0-sized buffers commit 3091c21d3e9322428691ce0b7a0cfa9c0b239eeb upstream. Move the padding of 0-sized buffers to an earlier stage to account for this round up during the alloc->free_async_space check. Fixes: 74310e06be4d ("android: binder: Move buffer out of area shared with user space") Reviewed-by: Alice Ryhl Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20231201172212.1813387-5-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder_alloc.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index cbcbc1e70a23..32402bce0cbd 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -415,6 +415,10 @@ static struct binder_buffer *binder_alloc_new_buf_locked( alloc->pid, extra_buffers_size); return ERR_PTR(-EINVAL); } + + /* Pad 0-size buffers so they get assigned unique addresses */ + size = max(size, sizeof(void *)); + if (is_async && alloc->free_async_space < size + sizeof(struct binder_buffer)) { binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC, @@ -423,9 +427,6 @@ static struct binder_buffer *binder_alloc_new_buf_locked( return ERR_PTR(-ENOSPC); } - /* Pad 0-size buffers so they get assigned unique addresses */ - size = max(size, sizeof(void *)); - while (n) { buffer = rb_entry(n, struct binder_buffer, rb_node); BUG_ON(!buffer->free); From abbb90928719a887ecbd48234affef898c55fb0d Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Fri, 1 Dec 2023 17:21:34 +0000 Subject: [PATCH 199/288] binder: fix unused alloc->free_async_space commit c6d05e0762ab276102246d24affd1e116a46aa0c upstream. Each transaction is associated with a 'struct binder_buffer' that stores the metadata about its buffer area. Since commit 74310e06be4d ("android: binder: Move buffer out of area shared with user space") this struct is no longer embedded within the buffer itself but is instead allocated on the heap to prevent userspace access to this driver-exclusive info. Unfortunately, the space of this struct is still being accounted for in the total buffer size calculation, specifically for async transactions. This results in an additional 104 bytes added to every async buffer request, and this area is never used. This wasted space can be substantial. If we consider the maximum mmap buffer space of SZ_4M, the driver will reserve half of it for async transactions, or 0x200000. This area should, in theory, accommodate up to 262,144 buffers of the minimum 8-byte size. However, after adding the extra 'sizeof(struct binder_buffer)', the total number of buffers drops to only 18,724, which is a sad 7.14% of the actual capacity. This patch fixes the buffer size calculation to enable the utilization of the entire async buffer space. This is expected to reduce the number of -ENOSPC errors that are seen on the field. Fixes: 74310e06be4d ("android: binder: Move buffer out of area shared with user space") Signed-off-by: Carlos Llamas Reviewed-by: Alice Ryhl Link: https://lore.kernel.org/r/20231201172212.1813387-6-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder_alloc.c | 11 ++++------- 1 file changed, 4 insertions(+), 7 deletions(-) diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index 32402bce0cbd..db0c1594611c 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -359,8 +359,7 @@ static void debug_low_async_space_locked(struct binder_alloc *alloc, int pid) continue; if (!buffer->async_transaction) continue; - total_alloc_size += binder_alloc_buffer_size(alloc, buffer) - + sizeof(struct binder_buffer); + total_alloc_size += binder_alloc_buffer_size(alloc, buffer); num_buffers++; } @@ -419,8 +418,7 @@ static struct binder_buffer *binder_alloc_new_buf_locked( /* Pad 0-size buffers so they get assigned unique addresses */ size = max(size, sizeof(void *)); - if (is_async && - alloc->free_async_space < size + sizeof(struct binder_buffer)) { + if (is_async && alloc->free_async_space < size) { binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC, "%d: binder_alloc_buf size %zd failed, no async space left\n", alloc->pid, size); @@ -527,7 +525,7 @@ static struct binder_buffer *binder_alloc_new_buf_locked( buffer->extra_buffers_size = extra_buffers_size; buffer->pid = pid; if (is_async) { - alloc->free_async_space -= size + sizeof(struct binder_buffer); + alloc->free_async_space -= size; binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC_ASYNC, "%d: binder_alloc_buf size %zd async free %zd\n", alloc->pid, size, alloc->free_async_space); @@ -663,8 +661,7 @@ static void binder_free_buf_locked(struct binder_alloc *alloc, BUG_ON(buffer->user_data > alloc->buffer + alloc->buffer_size); if (buffer->async_transaction) { - alloc->free_async_space += buffer_size + sizeof(struct binder_buffer); - + alloc->free_async_space += buffer_size; binder_alloc_debug(BINDER_DEBUG_BUFFER_ALLOC_ASYNC, "%d: binder_free_buf size %zd async free %zd\n", alloc->pid, size, alloc->free_async_space); From c8c1158ffb007197f31f9d9170cf13e4f34cbb5c Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Fri, 1 Dec 2023 17:21:31 +0000 Subject: [PATCH 200/288] binder: fix use-after-free in shinker's callback commit 3f489c2067c5824528212b0fc18b28d51332d906 upstream. The mmap read lock is used during the shrinker's callback, which means that using alloc->vma pointer isn't safe as it can race with munmap(). As of commit dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") the mmap lock is downgraded after the vma has been isolated. I was able to reproduce this issue by manually adding some delays and triggering page reclaiming through the shrinker's debug sysfs. The following KASAN report confirms the UAF: ================================================================== BUG: KASAN: slab-use-after-free in zap_page_range_single+0x470/0x4b8 Read of size 8 at addr ffff356ed50e50f0 by task bash/478 CPU: 1 PID: 478 Comm: bash Not tainted 6.6.0-rc5-00055-g1c8b86a3799f-dirty #70 Hardware name: linux,dummy-virt (DT) Call trace: zap_page_range_single+0x470/0x4b8 binder_alloc_free_page+0x608/0xadc __list_lru_walk_one+0x130/0x3b0 list_lru_walk_node+0xc4/0x22c binder_shrink_scan+0x108/0x1dc shrinker_debugfs_scan_write+0x2b4/0x500 full_proxy_write+0xd4/0x140 vfs_write+0x1ac/0x758 ksys_write+0xf0/0x1dc __arm64_sys_write+0x6c/0x9c Allocated by task 492: kmem_cache_alloc+0x130/0x368 vm_area_alloc+0x2c/0x190 mmap_region+0x258/0x18bc do_mmap+0x694/0xa60 vm_mmap_pgoff+0x170/0x29c ksys_mmap_pgoff+0x290/0x3a0 __arm64_sys_mmap+0xcc/0x144 Freed by task 491: kmem_cache_free+0x17c/0x3c8 vm_area_free_rcu_cb+0x74/0x98 rcu_core+0xa38/0x26d4 rcu_core_si+0x10/0x1c __do_softirq+0x2fc/0xd24 Last potentially related work creation: __call_rcu_common.constprop.0+0x6c/0xba0 call_rcu+0x10/0x1c vm_area_free+0x18/0x24 remove_vma+0xe4/0x118 do_vmi_align_munmap.isra.0+0x718/0xb5c do_vmi_munmap+0xdc/0x1fc __vm_munmap+0x10c/0x278 __arm64_sys_munmap+0x58/0x7c Fix this issue by performing instead a vma_lookup() which will fail to find the vma that was isolated before the mmap lock downgrade. Note that this option has better performance than upgrading to a mmap write lock which would increase contention. Plus, mmap_write_trylock() has been recently removed anyway. Fixes: dd2283f2605e ("mm: mmap: zap pages with read mmap_sem in munmap") Cc: stable@vger.kernel.org Cc: Liam Howlett Cc: Minchan Kim Reviewed-by: Alice Ryhl Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20231201172212.1813387-3-cmllamas@google.com [cmllamas: use find_vma() instead of vma_lookup() as commit ce6d42f2e4a2 is missing in v5.10. This only works because we check the vma against our cached alloc->vma pointer.] Signed-off-by: Carlos Llamas Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder_alloc.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index db0c1594611c..1af6af5fc381 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -1000,7 +1000,9 @@ enum lru_status binder_alloc_free_page(struct list_head *item, goto err_mmget; if (!mmap_read_trylock(mm)) goto err_mmap_read_lock_failed; - vma = binder_alloc_get_vma(alloc); + vma = find_vma(mm, page_addr); + if (vma && vma != binder_alloc_get_vma(alloc)) + goto err_invalid_vma; list_lru_isolate(lru, item); spin_unlock(lock); @@ -1026,6 +1028,8 @@ enum lru_status binder_alloc_free_page(struct list_head *item, mutex_unlock(&alloc->mutex); return LRU_REMOVED_RETRY; +err_invalid_vma: + mmap_read_unlock(mm); err_mmap_read_lock_failed: mmput_async(mm); err_mmget: From 0dfe57f1f237ab2f076c3b898d11e56824e6fd87 Mon Sep 17 00:00:00 2001 From: Hans de Goede Date: Tue, 16 Jan 2024 21:43:25 +0100 Subject: [PATCH 201/288] Input: atkbd - use ab83 as id when skipping the getid command MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 58f65f9db7e0de366a5a115c2e2c0703858bba69 upstream. Barnabás reported that the change to skip the getid command when the controller is in translated mode on laptops caused the Version field of his "AT Translated Set 2 keyboard" input device to change from ab83 to abba, breaking a custom hwdb entry for this keyboard. Use the standard ab83 id for keyboards when getid is skipped (rather then that getid fails) to avoid reporting a different Version to userspace then before skipping the getid. Fixes: 936e4d49ecbc ("Input: atkbd - skip ATKBD_CMD_GETID in translated mode") Reported-by: Barnabás Pőcze Closes: https://lore.kernel.org/linux-input/W1ydwoG2fYv85Z3C3yfDOJcVpilEvGge6UGa9kZh8zI2-qkHXp7WLnl2hSkFz63j-c7WupUWI5TLL6n7Lt8DjRuU-yJBwLYWrreb1hbnd6A=@protonmail.com/ Signed-off-by: Hans de Goede Link: https://lore.kernel.org/r/20240116204325.7719-1-hdegoede@redhat.com Signed-off-by: Dmitry Torokhov Signed-off-by: Greg Kroah-Hartman --- drivers/input/keyboard/atkbd.c | 12 +++++++----- 1 file changed, 7 insertions(+), 5 deletions(-) diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c index 90dd3caa4612..4912582c54da 100644 --- a/drivers/input/keyboard/atkbd.c +++ b/drivers/input/keyboard/atkbd.c @@ -782,9 +782,9 @@ static bool atkbd_is_portable_device(void) * not work. So in this case simply assume a keyboard is connected to avoid * confusing some laptop keyboards. * - * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using a fake id is - * ok in translated mode, only atkbd_select_set() checks atkbd->id and in - * translated mode that is a no-op. + * Skipping ATKBD_CMD_GETID ends up using a fake keyboard id. Using the standard + * 0xab83 id is ok in translated mode, only atkbd_select_set() checks atkbd->id + * and in translated mode that is a no-op. */ static bool atkbd_skip_getid(struct atkbd *atkbd) { @@ -802,6 +802,7 @@ static int atkbd_probe(struct atkbd *atkbd) { struct ps2dev *ps2dev = &atkbd->ps2dev; unsigned char param[2]; + bool skip_getid; /* * Some systems, where the bit-twiddling when testing the io-lines of the @@ -823,7 +824,8 @@ static int atkbd_probe(struct atkbd *atkbd) */ param[0] = param[1] = 0xa5; /* initialize with invalid values */ - if (atkbd_skip_getid(atkbd) || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { + skip_getid = atkbd_skip_getid(atkbd); + if (skip_getid || ps2_command(ps2dev, param, ATKBD_CMD_GETID)) { /* * If the get ID command was skipped or failed, we check if we can at least set @@ -833,7 +835,7 @@ static int atkbd_probe(struct atkbd *atkbd) param[0] = 0; if (ps2_command(ps2dev, param, ATKBD_CMD_SETLEDS)) return -1; - atkbd->id = 0xabba; + atkbd->id = skip_getid ? 0xab83 : 0xabba; return 0; } From c3b3389ad04679b7e5b18581fe4457996013372c Mon Sep 17 00:00:00 2001 From: Ren Zhijie Date: Thu, 30 Jun 2022 20:35:28 +0800 Subject: [PATCH 202/288] dma-mapping: Fix build error unused-value MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 50d6281ce9b8412f7ef02d1bc9d23aa62ae0cf98 upstream. If CONFIG_DMA_DECLARE_COHERENT is not set, make ARCH=x86_64 CROSS_COMPILE=x86_64-linux-gnu- will be failed, like this: drivers/remoteproc/remoteproc_core.c: In function ‘rproc_rvdev_release’: ./include/linux/dma-map-ops.h:182:42: error: statement with no effect [-Werror=unused-value] #define dma_release_coherent_memory(dev) (0) ^ drivers/remoteproc/remoteproc_core.c:464:2: note: in expansion of macro ‘dma_release_coherent_memory’ dma_release_coherent_memory(dev); ^~~~~~~~~~~~~~~~~~~~~~~~~~~ cc1: all warnings being treated as errors The return type of function dma_release_coherent_memory in CONFIG_DMA_DECLARE_COHERENT area is void, so in !CONFIG_DMA_DECLARE_COHERENT area it should neither return any value nor be defined as zero. Reported-by: Hulk Robot Fixes: e61c451476e6 ("dma-mapping: Add dma_release_coherent_memory to DMA API") Signed-off-by: Ren Zhijie Reviewed-by: Christoph Hellwig Link: https://lore.kernel.org/r/20220630123528.251181-1-renzhijie2@huawei.com Signed-off-by: Mathieu Poirier Signed-off-by: Greg Kroah-Hartman --- include/linux/dma-map-ops.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/include/linux/dma-map-ops.h b/include/linux/dma-map-ops.h index 22e3bfebdc34..ba1d93c662c6 100644 --- a/include/linux/dma-map-ops.h +++ b/include/linux/dma-map-ops.h @@ -185,10 +185,10 @@ static inline int dma_declare_coherent_memory(struct device *dev, return -ENOSYS; } -#define dma_release_coherent_memory(dev) (0) #define dma_alloc_from_dev_coherent(dev, size, handle, ret) (0) #define dma_release_from_dev_coherent(dev, order, vaddr) (0) #define dma_mmap_from_dev_coherent(dev, vma, vaddr, order, ret) (0) +static inline void dma_release_coherent_memory(struct device *dev) { } static inline void *dma_alloc_from_global_coherent(struct device *dev, ssize_t size, dma_addr_t *dma_handle) From dfdb686d1b430970c66e9c39cbe98184e6e2a3a0 Mon Sep 17 00:00:00 2001 From: lei he Date: Mon, 19 Sep 2022 15:51:58 +0800 Subject: [PATCH 203/288] virtio-crypto: fix memory-leak commit 1bedcf22c081a6e9943f09937b2da8d3ef52d20d upstream. Fix memory-leak for virtio-crypto akcipher request, this problem is introduced by 59ca6c93387d3(virtio-crypto: implement RSA algorithm). The leak can be reproduced and tested with the following script inside virtual machine: #!/bin/bash LOOP_TIMES=10000 # required module: pkcs8_key_parser, virtio_crypto modprobe pkcs8_key_parser # if CONFIG_PKCS8_PRIVATE_KEY_PARSER=m modprobe virtio_crypto # if CONFIG_CRYPTO_DEV_VIRTIO=m rm -rf /tmp/data dd if=/dev/random of=/tmp/data count=1 bs=230 # generate private key and self-signed cert openssl req -nodes -x509 -newkey rsa:2048 -keyout key.pem \ -outform der -out cert.der \ -subj "/C=CN/ST=GD/L=SZ/O=vihoo/OU=dev/CN=always.com/emailAddress=yy@always.com" # convert private key from pem to der openssl pkcs8 -in key.pem -topk8 -nocrypt -outform DER -out key.der # add key PRIV_KEY_ID=`cat key.der | keyctl padd asymmetric test_priv_key @s` echo "priv key id = "$PRIV_KEY_ID PUB_KEY_ID=`cat cert.der | keyctl padd asymmetric test_pub_key @s` echo "pub key id = "$PUB_KEY_ID # query key keyctl pkey_query $PRIV_KEY_ID 0 keyctl pkey_query $PUB_KEY_ID 0 # here we only run pkey_encrypt becasuse it is the fastest interface function bench_pub() { keyctl pkey_encrypt $PUB_KEY_ID 0 /tmp/data enc=pkcs1 >/tmp/enc.pub } # do bench_pub in loop to obtain the memory leak for (( i = 0; i < ${LOOP_TIMES}; ++i )); do bench_pub done Signed-off-by: lei he Acked-by: Michael S. Tsirkin Reviewed-by: Gonglei Message-Id: <20220919075158.3625-1-helei.sig11@bytedance.com> Signed-off-by: Michael S. Tsirkin Signed-off-by: Greg Kroah-Hartman --- drivers/crypto/virtio/virtio_crypto_akcipher_algs.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c index 382ccec9ab12..2cfc36d141c0 100644 --- a/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_akcipher_algs.c @@ -56,6 +56,10 @@ static void virtio_crypto_akcipher_finalize_req( struct virtio_crypto_akcipher_request *vc_akcipher_req, struct akcipher_request *req, int err) { + kfree(vc_akcipher_req->src_buf); + kfree(vc_akcipher_req->dst_buf); + vc_akcipher_req->src_buf = NULL; + vc_akcipher_req->dst_buf = NULL; virtcrypto_clear_request(&vc_akcipher_req->base); crypto_finalize_akcipher_request(vc_akcipher_req->base.dataq->engine, req, err); From 79026a2d0a1b080257773d22a493f9bcab8c65be Mon Sep 17 00:00:00 2001 From: Wei Yongjun Date: Mon, 14 Nov 2022 11:07:40 +0000 Subject: [PATCH 204/288] virtio-crypto: fix memory leak in virtio_crypto_alg_skcipher_close_session() commit b1d65f717cd6305a396a8738e022c6f7c65cfbe8 upstream. 'vc_ctrl_req' is alloced in virtio_crypto_alg_skcipher_close_session(), and should be freed in the invalid ctrl_status->status error handling case. Otherwise there is a memory leak. Fixes: 0756ad15b1fe ("virtio-crypto: use private buffer for control request") Signed-off-by: Wei Yongjun Message-Id: <20221114110740.537276-1-weiyongjun@huaweicloud.com> Signed-off-by: Michael S. Tsirkin Reviewed-by: Gonglei Acked-by: zhenwei pi Acked-by: Jason Wang Signed-off-by: Greg Kroah-Hartman --- drivers/crypto/virtio/virtio_crypto_algs.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-) diff --git a/drivers/crypto/virtio/virtio_crypto_algs.c b/drivers/crypto/virtio/virtio_crypto_algs.c index 32c73e7d8243..ae645c9d47a7 100644 --- a/drivers/crypto/virtio/virtio_crypto_algs.c +++ b/drivers/crypto/virtio/virtio_crypto_algs.c @@ -239,7 +239,8 @@ static int virtio_crypto_alg_skcipher_close_session( pr_err("virtio_crypto: Close session failed status: %u, session_id: 0x%llx\n", ctrl_status->status, destroy_session->session_id); - return -EINVAL; + err = -EINVAL; + goto out; } err = 0; From c02cdc2c5e87ee3150075cbb1b3deb17e8c3d9c0 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 18 Jan 2024 11:14:14 +0100 Subject: [PATCH 205/288] Revert "ASoC: atmel: Remove system clock tree configuration for at91sam9g20ek" This reverts commit 608fc58858bfa7552a9824c2f0e4a3ab8dd4efaa which is commit c775cbf62ed4911e4f0f23880f01815753123690 upstream. It is reported to cause problems, so drop it from the 5.10.y tree for now. Link: https://lore.kernel.org/r/845b3053-d47b-4717-9665-79b120da133b@sirena.org.uk Reported-by: Mark Brown Cc: Codrin Ciubotariu Cc: Sasha Levin Signed-off-by: Greg Kroah-Hartman --- sound/soc/atmel/sam9g20_wm8731.c | 61 ++++++++++++++++++++++++++++++++ 1 file changed, 61 insertions(+) diff --git a/sound/soc/atmel/sam9g20_wm8731.c b/sound/soc/atmel/sam9g20_wm8731.c index d243de5f23dc..8a55d59a6c2a 100644 --- a/sound/soc/atmel/sam9g20_wm8731.c +++ b/sound/soc/atmel/sam9g20_wm8731.c @@ -46,6 +46,35 @@ */ #undef ENABLE_MIC_INPUT +static struct clk *mclk; + +static int at91sam9g20ek_set_bias_level(struct snd_soc_card *card, + struct snd_soc_dapm_context *dapm, + enum snd_soc_bias_level level) +{ + static int mclk_on; + int ret = 0; + + switch (level) { + case SND_SOC_BIAS_ON: + case SND_SOC_BIAS_PREPARE: + if (!mclk_on) + ret = clk_enable(mclk); + if (ret == 0) + mclk_on = 1; + break; + + case SND_SOC_BIAS_OFF: + case SND_SOC_BIAS_STANDBY: + if (mclk_on) + clk_disable(mclk); + mclk_on = 0; + break; + } + + return ret; +} + static const struct snd_soc_dapm_widget at91sam9g20ek_dapm_widgets[] = { SND_SOC_DAPM_MIC("Int Mic", NULL), SND_SOC_DAPM_SPK("Ext Spk", NULL), @@ -106,6 +135,7 @@ static struct snd_soc_card snd_soc_at91sam9g20ek = { .owner = THIS_MODULE, .dai_link = &at91sam9g20ek_dai, .num_links = 1, + .set_bias_level = at91sam9g20ek_set_bias_level, .dapm_widgets = at91sam9g20ek_dapm_widgets, .num_dapm_widgets = ARRAY_SIZE(at91sam9g20ek_dapm_widgets), @@ -118,6 +148,7 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev) { struct device_node *np = pdev->dev.of_node; struct device_node *codec_np, *cpu_np; + struct clk *pllb; struct snd_soc_card *card = &snd_soc_at91sam9g20ek; int ret; @@ -131,6 +162,31 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev) return -EINVAL; } + /* + * Codec MCLK is supplied by PCK0 - set it up. + */ + mclk = clk_get(NULL, "pck0"); + if (IS_ERR(mclk)) { + dev_err(&pdev->dev, "Failed to get MCLK\n"); + ret = PTR_ERR(mclk); + goto err; + } + + pllb = clk_get(NULL, "pllb"); + if (IS_ERR(pllb)) { + dev_err(&pdev->dev, "Failed to get PLLB\n"); + ret = PTR_ERR(pllb); + goto err_mclk; + } + ret = clk_set_parent(mclk, pllb); + clk_put(pllb); + if (ret != 0) { + dev_err(&pdev->dev, "Failed to set MCLK parent\n"); + goto err_mclk; + } + + clk_set_rate(mclk, MCLK_RATE); + card->dev = &pdev->dev; /* Parse device node info */ @@ -174,6 +230,9 @@ static int at91sam9g20ek_audio_probe(struct platform_device *pdev) return ret; +err_mclk: + clk_put(mclk); + mclk = NULL; err: atmel_ssc_put_audio(0); return ret; @@ -183,6 +242,8 @@ static int at91sam9g20ek_audio_remove(struct platform_device *pdev) { struct snd_soc_card *card = platform_get_drvdata(pdev); + clk_disable(mclk); + mclk = NULL; snd_soc_unregister_card(card); atmel_ssc_put_audio(0); From 8a294639153107d36ad097a88649c4c647a24a2d Mon Sep 17 00:00:00 2001 From: "Masami Hiramatsu (Google)" Date: Tue, 21 Feb 2023 08:49:16 +0900 Subject: [PATCH 206/288] kprobes: Fix to handle forcibly unoptimized kprobes on freeing_list commit 4fbd2f83fda0ca44a2ec6421ca3508b355b31858 upstream. Since forcibly unoptimized kprobes will be put on the freeing_list directly in the unoptimize_kprobe(), do_unoptimize_kprobes() must continue to check the freeing_list even if unoptimizing_list is empty. This bug can happen if a kprobe is put in an instruction which is in the middle of the jump-replaced instruction sequence of an optprobe, *and* the optprobe is recently unregistered and queued on unoptimizing_list. In this case, the optprobe will be unoptimized forcibly (means immediately) and put it into the freeing_list, expecting the optprobe will be handled in do_unoptimize_kprobe(). But if there is no other optprobes on the unoptimizing_list, current code returns from the do_unoptimize_kprobe() soon and does not handle the optprobe which is on the freeing_list. Then the optprobe will hit the WARN_ON_ONCE() in the do_free_cleaned_kprobes(), because it is not handled in the latter loop of the do_unoptimize_kprobe(). To solve this issue, do not return from do_unoptimize_kprobes() immediately even if unoptimizing_list is empty. Moreover, this change affects another case. kill_optimized_kprobes() expects kprobe_optimizer() will just free the optprobe on freeing_list. So I changed it to just do list_move() to freeing_list if optprobes are on unoptimizing list. And the do_unoptimize_kprobe() will skip arch_disarm_kprobe() if the probe on freeing_list has gone flag. Link: https://lore.kernel.org/all/Y8URdIfVr3pq2X8w@xpf.sh.intel.com/ Link: https://lore.kernel.org/all/167448024501.3253718.13037333683110512967.stgit@devnote3/ Fixes: e4add247789e ("kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic") Reported-by: Pengfei Xu Signed-off-by: Masami Hiramatsu (Google) Cc: stable@vger.kernel.org Acked-by: Steven Rostedt (Google) [fp: adjust comment conflict regarding commit 223a76b268c9 ("kprobes: Fix coding style issues")] Signed-off-by: Fedor Pchelkin Signed-off-by: Greg Kroah-Hartman --- kernel/kprobes.c | 23 ++++++++++------------- 1 file changed, 10 insertions(+), 13 deletions(-) diff --git a/kernel/kprobes.c b/kernel/kprobes.c index f1ea3123f383..05d3e156a7d6 100644 --- a/kernel/kprobes.c +++ b/kernel/kprobes.c @@ -545,17 +545,15 @@ static void do_unoptimize_kprobes(void) /* See comment in do_optimize_kprobes() */ lockdep_assert_cpus_held(); - /* Unoptimization must be done anytime */ - if (list_empty(&unoptimizing_list)) - return; + if (!list_empty(&unoptimizing_list)) + arch_unoptimize_kprobes(&unoptimizing_list, &freeing_list); - arch_unoptimize_kprobes(&unoptimizing_list, &freeing_list); - /* Loop free_list for disarming */ + /* Loop on 'freeing_list' for disarming and removing from kprobe hash list */ list_for_each_entry_safe(op, tmp, &freeing_list, list) { /* Switching from detour code to origin */ op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED; - /* Disarm probes if marked disabled */ - if (kprobe_disabled(&op->kp)) + /* Disarm probes if marked disabled and not gone */ + if (kprobe_disabled(&op->kp) && !kprobe_gone(&op->kp)) arch_disarm_kprobe(&op->kp); if (kprobe_unused(&op->kp)) { /* @@ -784,14 +782,13 @@ static void kill_optimized_kprobe(struct kprobe *p) op->kp.flags &= ~KPROBE_FLAG_OPTIMIZED; if (kprobe_unused(p)) { - /* Enqueue if it is unused */ - list_add(&op->list, &freeing_list); /* - * Remove unused probes from the hash list. After waiting - * for synchronization, this probe is reclaimed. - * (reclaiming is done by do_free_cleaned_kprobes().) + * Unused kprobe is on unoptimizing or freeing list. We move it + * to freeing_list and let the kprobe_optimizer() remove it from + * the kprobe hash list and free it. */ - hlist_del_rcu(&op->kp.hlist); + if (optprobe_queued_unopt(op)) + list_move(&op->list, &freeing_list); } /* Don't touch the code, because it is already freed. */ From d1e68ad279019bf92335e0f1483bba81472d774d Mon Sep 17 00:00:00 2001 From: Chukun Pan Date: Mon, 22 Jan 2024 21:02:19 +0800 Subject: [PATCH 207/288] net: ethernet: mtk_eth_soc: remove duplicate if statements It seems that there was something wrong with backport, causing `if (err)` to appear twice in the same place. Fixes: da86a63479e ("net: ethernet: mtk_eth_soc: fix error handling in mtk_open()") Cc: Liu Jian Cc: Russell King (Oracle) Cc: Jakub Kicinski Cc: Sasha Levin Signed-off-by: Chukun Pan Signed-off-by: Greg Kroah-Hartman --- drivers/net/ethernet/mediatek/mtk_eth_soc.c | 1 - 1 file changed, 1 deletion(-) diff --git a/drivers/net/ethernet/mediatek/mtk_eth_soc.c b/drivers/net/ethernet/mediatek/mtk_eth_soc.c index aa9e616cc1d5..011210e6842d 100644 --- a/drivers/net/ethernet/mediatek/mtk_eth_soc.c +++ b/drivers/net/ethernet/mediatek/mtk_eth_soc.c @@ -2302,7 +2302,6 @@ static int mtk_open(struct net_device *dev) if (!refcount_read(ð->dma_refcnt)) { int err = mtk_start_dma(eth); - if (err) if (err) { phylink_disconnect_phy(mac->phylink); return err; From cce8ba6fa4ec43ad778d64823a2f8ca120d362c1 Mon Sep 17 00:00:00 2001 From: Jan Beulich Date: Mon, 8 Jan 2024 10:38:12 +0100 Subject: [PATCH 208/288] xen-netback: don't produce zero-size SKB frags commit c7ec4f2d684e17d69bbdd7c4324db0ef5daac26a upstream. While frontends may submit zero-size requests (wasting a precious slot), core networking code as of at least 3ece782693c4b ("sock: skb_copy_ubufs support for compound pages") can't deal with SKBs when they have all zero-size fragments. Respond to empty requests right when populating fragments; all further processing is fragment based and hence won't encounter these empty requests anymore. In a way this should have been that way from the beginning: When no data is to be transferred for a particular request, there's not even a point in validating the respective grant ref. That's no different from e.g. passing NULL into memcpy() when at the same time the size is 0. This is XSA-448 / CVE-2023-46838. Cc: stable@vger.kernel.org Signed-off-by: Jan Beulich Reviewed-by: Juergen Gross Reviewed-by: Paul Durrant Signed-off-by: Greg Kroah-Hartman --- drivers/net/xen-netback/netback.c | 44 ++++++++++++++++++++++++++----- 1 file changed, 38 insertions(+), 6 deletions(-) diff --git a/drivers/net/xen-netback/netback.c b/drivers/net/xen-netback/netback.c index 1c366ddf62bc..d25bb5b9a54c 100644 --- a/drivers/net/xen-netback/netback.c +++ b/drivers/net/xen-netback/netback.c @@ -463,12 +463,25 @@ static void xenvif_get_requests(struct xenvif_queue *queue, } for (shinfo->nr_frags = 0; nr_slots > 0 && shinfo->nr_frags < MAX_SKB_FRAGS; - shinfo->nr_frags++, gop++, nr_slots--) { + nr_slots--) { + if (unlikely(!txp->size)) { + unsigned long flags; + + spin_lock_irqsave(&queue->response_lock, flags); + make_tx_response(queue, txp, 0, XEN_NETIF_RSP_OKAY); + push_tx_responses(queue); + spin_unlock_irqrestore(&queue->response_lock, flags); + ++txp; + continue; + } + index = pending_index(queue->pending_cons++); pending_idx = queue->pending_ring[index]; xenvif_tx_create_map_op(queue, pending_idx, txp, txp == first ? extra_count : 0, gop); frag_set_pending_idx(&frags[shinfo->nr_frags], pending_idx); + ++shinfo->nr_frags; + ++gop; if (txp == first) txp = txfrags; @@ -481,20 +494,39 @@ static void xenvif_get_requests(struct xenvif_queue *queue, shinfo = skb_shinfo(nskb); frags = shinfo->frags; - for (shinfo->nr_frags = 0; shinfo->nr_frags < nr_slots; - shinfo->nr_frags++, txp++, gop++) { + for (shinfo->nr_frags = 0; shinfo->nr_frags < nr_slots; ++txp) { + if (unlikely(!txp->size)) { + unsigned long flags; + + spin_lock_irqsave(&queue->response_lock, flags); + make_tx_response(queue, txp, 0, + XEN_NETIF_RSP_OKAY); + push_tx_responses(queue); + spin_unlock_irqrestore(&queue->response_lock, + flags); + continue; + } + index = pending_index(queue->pending_cons++); pending_idx = queue->pending_ring[index]; xenvif_tx_create_map_op(queue, pending_idx, txp, 0, gop); frag_set_pending_idx(&frags[shinfo->nr_frags], pending_idx); + ++shinfo->nr_frags; + ++gop; } - skb_shinfo(skb)->frag_list = nskb; - } else if (nskb) { + if (shinfo->nr_frags) { + skb_shinfo(skb)->frag_list = nskb; + nskb = NULL; + } + } + + if (nskb) { /* A frag_list skb was allocated but it is no longer needed - * because enough slots were converted to copy ops above. + * because enough slots were converted to copy ops above or some + * were empty. */ kfree_skb(nskb); } From 7e7a0d86542b0ea903006d3f42f33c4f7ead6918 Mon Sep 17 00:00:00 2001 From: Carlos Llamas Date: Fri, 1 Dec 2023 17:21:32 +0000 Subject: [PATCH 209/288] binder: fix race between mmput() and do_exit() commit 9a9ab0d963621d9d12199df9817e66982582d5a5 upstream. Task A calls binder_update_page_range() to allocate and insert pages on a remote address space from Task B. For this, Task A pins the remote mm via mmget_not_zero() first. This can race with Task B do_exit() and the final mmput() refcount decrement will come from Task A. Task A | Task B ------------------+------------------ mmget_not_zero() | | do_exit() | exit_mm() | mmput() mmput() | exit_mmap() | remove_vma() | fput() | In this case, the work of ____fput() from Task B is queued up in Task A as TWA_RESUME. So in theory, Task A returns to userspace and the cleanup work gets executed. However, Task A instead sleep, waiting for a reply from Task B that never comes (it's dead). This means the binder_deferred_release() is blocked until an unrelated binder event forces Task A to go back to userspace. All the associated death notifications will also be delayed until then. In order to fix this use mmput_async() that will schedule the work in the corresponding mm->async_put_work WQ instead of Task A. Fixes: 457b9a6f09f0 ("Staging: android: add binder driver") Reviewed-by: Alice Ryhl Signed-off-by: Carlos Llamas Link: https://lore.kernel.org/r/20231201172212.1813387-4-cmllamas@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/android/binder_alloc.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/android/binder_alloc.c b/drivers/android/binder_alloc.c index 1af6af5fc381..b655bc3956c7 100644 --- a/drivers/android/binder_alloc.c +++ b/drivers/android/binder_alloc.c @@ -271,7 +271,7 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate, } if (mm) { mmap_write_unlock(mm); - mmput(mm); + mmput_async(mm); } return 0; @@ -304,7 +304,7 @@ static int binder_update_page_range(struct binder_alloc *alloc, int allocate, err_no_vma: if (mm) { mmap_write_unlock(mm); - mmput(mm); + mmput_async(mm); } return vma ? -ENOMEM : -ESRCH; } From d65cade544def2446505b04a08c4acb95401d203 Mon Sep 17 00:00:00 2001 From: Heiko Carstens Date: Mon, 15 Jan 2024 17:35:55 +0100 Subject: [PATCH 210/288] tick-sched: Fix idle and iowait sleeptime accounting vs CPU hotplug commit 71fee48fb772ac4f6cfa63dbebc5629de8b4cc09 upstream. When offlining and onlining CPUs the overall reported idle and iowait times as reported by /proc/stat jump backward and forward: cpu 132 0 176 225249 47 6 6 21 0 0 cpu0 80 0 115 112575 33 3 4 18 0 0 cpu1 52 0 60 112673 13 3 1 2 0 0 cpu 133 0 177 226681 47 6 6 21 0 0 cpu0 80 0 116 113387 33 3 4 18 0 0 cpu 133 0 178 114431 33 6 6 21 0 0 <---- jump backward cpu0 80 0 116 114247 33 3 4 18 0 0 cpu1 52 0 61 183 0 3 1 2 0 0 <---- idle + iowait start with 0 cpu 133 0 178 228956 47 6 6 21 0 0 <---- jump forward cpu0 81 0 117 114929 33 3 4 18 0 0 Reason for this is that get_idle_time() in fs/proc/stat.c has different sources for both values depending on if a CPU is online or offline: - if a CPU is online the values may be taken from its per cpu tick_cpu_sched structure - if a CPU is offline the values are taken from its per cpu cpustat structure The problem is that the per cpu tick_cpu_sched structure is set to zero on CPU offline. See tick_cancel_sched_timer() in kernel/time/tick-sched.c. Therefore when a CPU is brought offline and online afterwards both its idle and iowait sleeptime will be zero, causing a jump backward in total system idle and iowait sleeptime. In a similar way if a CPU is then brought offline again the total idle and iowait sleeptimes will jump forward. It looks like this behavior was introduced with commit 4b0c0f294f60 ("tick: Cleanup NOHZ per cpu data on cpu down"). This was only noticed now on s390, since we switched to generic idle time reporting with commit be76ea614460 ("s390/idle: remove arch_cpu_idle_time() and corresponding code"). Fix this by preserving the values of idle_sleeptime and iowait_sleeptime members of the per-cpu tick_sched structure on CPU hotplug. Fixes: 4b0c0f294f60 ("tick: Cleanup NOHZ per cpu data on cpu down") Reported-by: Gerald Schaefer Signed-off-by: Heiko Carstens Signed-off-by: Thomas Gleixner Reviewed-by: Frederic Weisbecker Link: https://lore.kernel.org/r/20240115163555.1004144-1-hca@linux.ibm.com Signed-off-by: Greg Kroah-Hartman --- kernel/time/tick-sched.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index fc79b04b5947..bc00ab0118e6 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -1439,13 +1439,18 @@ void tick_setup_sched_timer(void) void tick_cancel_sched_timer(int cpu) { struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); + ktime_t idle_sleeptime, iowait_sleeptime; # ifdef CONFIG_HIGH_RES_TIMERS if (ts->sched_timer.base) hrtimer_cancel(&ts->sched_timer); # endif + idle_sleeptime = ts->idle_sleeptime; + iowait_sleeptime = ts->iowait_sleeptime; memset(ts, 0, sizeof(*ts)); + ts->idle_sleeptime = idle_sleeptime; + ts->iowait_sleeptime = iowait_sleeptime; } #endif From e70b17282a5c3c0435a2ca3b616a97804eeda427 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Thu, 28 Dec 2023 19:07:53 +0800 Subject: [PATCH 211/288] usb: phy: mxs: remove CONFIG_USB_OTG condition for mxs_phy_is_otg_host() commit ff2b89de471da942a4d853443688113a44fd35ed upstream. When CONFIG_USB_OTG is not set, mxs_phy_is_otg_host() will always return false. This behaviour is wrong. Since phy.last_event will always be set for either host or device mode. Therefore, CONFIG_USB_OTG condition can be removed. Fixes: 5eda42aebb76 ("usb: phy: mxs: fix getting wrong state with mxs_phy_is_otg_host()") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Link: https://lore.kernel.org/r/20231228110753.1755756-3-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/phy/phy-mxs-usb.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/usb/phy/phy-mxs-usb.c b/drivers/usb/phy/phy-mxs-usb.c index 70e23334b27f..e3cddcac3252 100644 --- a/drivers/usb/phy/phy-mxs-usb.c +++ b/drivers/usb/phy/phy-mxs-usb.c @@ -388,8 +388,7 @@ static void __mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool disconnect) static bool mxs_phy_is_otg_host(struct mxs_phy *mxs_phy) { - return IS_ENABLED(CONFIG_USB_OTG) && - mxs_phy->phy.last_event == USB_EVENT_ID; + return mxs_phy->phy.last_event == USB_EVENT_ID; } static void mxs_phy_disconnect_line(struct mxs_phy *mxs_phy, bool on) From 3253888660149a8ff60cca072eec055792786350 Mon Sep 17 00:00:00 2001 From: Uttkarsh Aggarwal Date: Fri, 22 Dec 2023 15:17:04 +0530 Subject: [PATCH 212/288] usb: dwc: ep0: Update request status in dwc3_ep0_stall_restart commit e9d40b215e38480fd94c66b06d79045717a59e9c upstream. Current implementation blocks the running operations when Plug-out and Plug-In is performed continuously, process gets stuck in dwc3_thread_interrupt(). Code Flow: CPU1 ->Gadget_start ->dwc3_interrupt ->dwc3_thread_interrupt ->dwc3_process_event_buf ->dwc3_process_event_entry ->dwc3_endpoint_interrupt ->dwc3_ep0_interrupt ->dwc3_ep0_inspect_setup ->dwc3_ep0_stall_and_restart By this time if pending_list is not empty, it will get the next request on the given list and calls dwc3_gadget_giveback which will unmap request and call its complete() callback to notify upper layers that it has completed. Currently dwc3_gadget_giveback status is set to -ECONNRESET, whereas it should be -ESHUTDOWN based on condition if not dwc->connected is true. Cc: Fixes: d742220b3577 ("usb: dwc3: ep0: giveback requests on stall_and_restart") Signed-off-by: Uttkarsh Aggarwal Link: https://lore.kernel.org/r/20231222094704.20276-1-quic_uaggarwa@quicinc.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/ep0.c | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/ep0.c b/drivers/usb/dwc3/ep0.c index 3cd294264372..14bdef97090b 100644 --- a/drivers/usb/dwc3/ep0.c +++ b/drivers/usb/dwc3/ep0.c @@ -236,7 +236,10 @@ static void dwc3_ep0_stall_and_restart(struct dwc3 *dwc) struct dwc3_request *req; req = next_request(&dep->pending_list); - dwc3_gadget_giveback(dep, req, -ECONNRESET); + if (!dwc->connected) + dwc3_gadget_giveback(dep, req, -ESHUTDOWN); + else + dwc3_gadget_giveback(dep, req, -ECONNRESET); } dwc->ep0state = EP0_SETUP_PHASE; From 1af0423587816b12fa0284980d057720db7dd069 Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Fri, 22 Dec 2023 22:11:27 +0000 Subject: [PATCH 213/288] Revert "usb: dwc3: Soft reset phy on probe for host" MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 7059fbebcb00554c3f31e5b5d93ef6d2d96dc7b4 upstream. This reverts commit 8bea147dfdf823eaa8d3baeccc7aeb041b41944b. The phy soft reset GUSB2PHYCFG.PHYSOFTRST only applies to UTMI phy, not ULPI. This fix is incomplete. Cc: Fixes: 8bea147dfdf8 ("usb: dwc3: Soft reset phy on probe for host") Reported-by: Köry Maincent Closes: https://lore.kernel.org/linux-usb/20231205151959.5236c231@kmaincent-XPS-13-7390 Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/29a26593a60eba727de872a3e580a674807b3339.1703282469.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 39 +-------------------------------------- 1 file changed, 1 insertion(+), 38 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 214a8ff2d69c..e581be9a76e2 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -277,46 +277,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) * XHCI driver will reset the host block. If dwc3 was configured for * host-only mode or current role is host, then we can return early. */ - if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; - /* - * If the dr_mode is host and the dwc->current_dr_role is not the - * corresponding DWC3_GCTL_PRTCAP_HOST, then the dwc3_core_init_mode - * isn't executed yet. Ensure the phy is ready before the controller - * updates the GCTL.PRTCAPDIR or other settings by soft-resetting - * the phy. - * - * Note: GUSB3PIPECTL[n] and GUSB2PHYCFG[n] are port settings where n - * is port index. If this is a multiport host, then we need to reset - * all active ports. - */ - if (dwc->dr_mode == USB_DR_MODE_HOST) { - u32 usb3_port; - u32 usb2_port; - - usb3_port = dwc3_readl(dwc->regs, DWC3_GUSB3PIPECTL(0)); - usb3_port |= DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); - - usb2_port = dwc3_readl(dwc->regs, DWC3_GUSB2PHYCFG(0)); - usb2_port |= DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); - - /* Small delay for phy reset assertion */ - usleep_range(1000, 2000); - - usb3_port &= ~DWC3_GUSB3PIPECTL_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB3PIPECTL(0), usb3_port); - - usb2_port &= ~DWC3_GUSB2PHYCFG_PHYSOFTRST; - dwc3_writel(dwc->regs, DWC3_GUSB2PHYCFG(0), usb2_port); - - /* Wait for clock synchronization */ - msleep(50); - return 0; - } - reg = dwc3_readl(dwc->regs, DWC3_DCTL); reg |= DWC3_DCTL_CSFTRST; reg &= ~DWC3_DCTL_RUN_STOP; From 084de4c659bbe9d43b63b72d556690df3ec459fe Mon Sep 17 00:00:00 2001 From: Thinh Nguyen Date: Fri, 22 Dec 2023 22:11:33 +0000 Subject: [PATCH 214/288] Revert "usb: dwc3: don't reset device side if dwc3 was configured as host-only" commit afe28cd686aeb77e8d9140d50fb1cf06a7ecb731 upstream. This reverts commit e835c0a4e23c38531dcee5ef77e8d1cf462658c7. Don't omit soft-reset. During initialization, the driver may need to perform a soft reset to ensure the phy is ready when the controller updates the GCTL.PRTCAPDIR or other settings by issuing phy soft-reset. Many platforms often have access to DCTL register for soft-reset despite being host-only. If there are actual reported issues from the platforms that don't expose DCTL registers, then we will need to revisit (perhaps to teach dwc3 to perform xhci's soft-reset USBCMD.HCRST). Cc: Fixes: e835c0a4e23c ("usb: dwc3: don't reset device side if dwc3 was configured as host-only") Signed-off-by: Thinh Nguyen Link: https://lore.kernel.org/r/7668ab11a48f260820825274976eb41fec7f54d1.1703282469.git.Thinh.Nguyen@synopsys.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/dwc3/core.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index e581be9a76e2..26f9928b972c 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -275,9 +275,9 @@ int dwc3_core_soft_reset(struct dwc3 *dwc) /* * We're resetting only the device side because, if we're in host mode, * XHCI driver will reset the host block. If dwc3 was configured for - * host-only mode or current role is host, then we can return early. + * host-only mode, then we can return early. */ - if (dwc->dr_mode == USB_DR_MODE_HOST || dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) + if (dwc->current_dr_role == DWC3_GCTL_PRTCAP_HOST) return 0; reg = dwc3_readl(dwc->regs, DWC3_DCTL); From f5c09e1d6e3339f4bb82029b7af27006b0414072 Mon Sep 17 00:00:00 2001 From: Xu Yang Date: Thu, 28 Dec 2023 19:07:52 +0800 Subject: [PATCH 215/288] usb: chipidea: wait controller resume finished for wakeup irq commit 128d849074d05545becf86e713715ce7676fc074 upstream. After the chipidea driver introduce extcon for id and vbus, it's able to wakeup from another irq source, in case the system with extcon ID cable, wakeup from usb ID cable and device removal, the usb device disconnect irq may come firstly before the extcon notifier while system resume, so we will get 2 "wakeup" irq, one for usb device disconnect; and one for extcon ID cable change(real wakeup event), current driver treat them as 2 successive wakeup irq so can't handle it correctly, then finally the usb irq can't be enabled. This patch adds a check to bypass further usb events before controller resume finished to fix it. Fixes: 1f874edcb731 ("usb: chipidea: add runtime power management support") cc: Acked-by: Peter Chen Signed-off-by: Xu Yang Signed-off-by: Li Jun Link: https://lore.kernel.org/r/20231228110753.1755756-2-xu.yang_2@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/chipidea/core.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/usb/chipidea/core.c b/drivers/usb/chipidea/core.c index 3d18599c5b9e..b8bb4cdadff8 100644 --- a/drivers/usb/chipidea/core.c +++ b/drivers/usb/chipidea/core.c @@ -516,6 +516,13 @@ static irqreturn_t ci_irq_handler(int irq, void *data) u32 otgsc = 0; if (ci->in_lpm) { + /* + * If we already have a wakeup irq pending there, + * let's just return to wait resume finished firstly. + */ + if (ci->wakeup_int) + return IRQ_HANDLED; + disable_irq_nosync(irq); ci->wakeup_int = true; pm_runtime_get(ci->dev); From baaa6d8e3f7297c23d7797a4e6788ec0fa864467 Mon Sep 17 00:00:00 2001 From: Heikki Krogerus Date: Tue, 2 Jan 2024 11:11:41 +0200 Subject: [PATCH 216/288] Revert "usb: typec: class: fix typec_altmode_put_partner to put plugs" commit 9c6b789e954fae73c548f39332bcc56bdf0d4373 upstream. This reverts commit b17b7fe6dd5c6ff74b38b0758ca799cdbb79e26e. That commit messed up the reference counting, so it needs to be rethought. Fixes: b17b7fe6dd5c ("usb: typec: class: fix typec_altmode_put_partner to put plugs") Cc: Cc: RD Babiera Reported-by: Chris Bainbridge Closes: https://lore.kernel.org/lkml/CAP-bSRb3SXpgo_BEdqZB-p1K5625fMegRZ17ZkPE1J8ZYgEHDg@mail.gmail.com/ Signed-off-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240102091142.2136472-1-heikki.krogerus@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 5 ++--- 1 file changed, 2 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 18b35e817361..9d3a35b2046d 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -194,7 +194,7 @@ static void typec_altmode_put_partner(struct altmode *altmode) if (!partner) return; - adev = &altmode->adev; + adev = &partner->adev; if (is_typec_plug(adev->dev.parent)) { struct typec_plug *plug = to_typec_plug(adev->dev.parent); @@ -424,8 +424,7 @@ static void typec_altmode_release(struct device *dev) { struct altmode *alt = to_altmode(to_typec_altmode(dev)); - if (!is_typec_port(dev->parent)) - typec_altmode_put_partner(alt); + typec_altmode_put_partner(alt); altmode_id_remove(alt->adev.dev.parent, alt->id); kfree(alt); From 5e5ab50effb5f793eaa8a50d664f7acb30e2cd3c Mon Sep 17 00:00:00 2001 From: RD Babiera Date: Wed, 3 Jan 2024 18:17:55 +0000 Subject: [PATCH 217/288] usb: typec: class: fix typec_altmode_put_partner to put plugs commit 5962ded777d689cd8bf04454273e32228d7fb71f upstream. When typec_altmode_put_partner is called by a plug altmode upon release, the port altmode the plug belongs to will not remove its reference to the plug. The check to see if the altmode being released is a plug evaluates against the released altmode's partner instead of the calling altmode, so change adev in typec_altmode_put_partner to properly refer to the altmode being released. Because typec_altmode_set_partner calls get_device() on the port altmode, add partner_adev that points to the port altmode in typec_put_partner to call put_device() on. typec_altmode_set_partner is not called for port altmodes, so add a check in typec_altmode_release to prevent typec_altmode_put_partner() calls on port altmode release. Fixes: 8a37d87d72f0 ("usb: typec: Bus type for alternate modes") Cc: Co-developed-by: Christian A. Ehrhardt Signed-off-by: Christian A. Ehrhardt Signed-off-by: RD Babiera Tested-by: Christian A. Ehrhardt Acked-by: Heikki Krogerus Link: https://lore.kernel.org/r/20240103181754.2492492-2-rdbabiera@google.com Signed-off-by: Greg Kroah-Hartman --- drivers/usb/typec/class.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/drivers/usb/typec/class.c b/drivers/usb/typec/class.c index 9d3a35b2046d..7fa95e701244 100644 --- a/drivers/usb/typec/class.c +++ b/drivers/usb/typec/class.c @@ -190,11 +190,13 @@ static void typec_altmode_put_partner(struct altmode *altmode) { struct altmode *partner = altmode->partner; struct typec_altmode *adev; + struct typec_altmode *partner_adev; if (!partner) return; - adev = &partner->adev; + adev = &altmode->adev; + partner_adev = &partner->adev; if (is_typec_plug(adev->dev.parent)) { struct typec_plug *plug = to_typec_plug(adev->dev.parent); @@ -203,7 +205,7 @@ static void typec_altmode_put_partner(struct altmode *altmode) } else { partner->partner = NULL; } - put_device(&adev->dev); + put_device(&partner_adev->dev); } /** @@ -424,7 +426,8 @@ static void typec_altmode_release(struct device *dev) { struct altmode *alt = to_altmode(to_typec_altmode(dev)); - typec_altmode_put_partner(alt); + if (!is_typec_port(dev->parent)) + typec_altmode_put_partner(alt); altmode_id_remove(alt->adev.dev.parent, alt->id); kfree(alt); From b7747ca58e85c9ae30b32b4f85b4ee778cb6b1a2 Mon Sep 17 00:00:00 2001 From: Gui-Dong Han <2045gemini@gmail.com> Date: Fri, 5 Jan 2024 13:24:12 +0800 Subject: [PATCH 218/288] usb: mon: Fix atomicity violation in mon_bin_vma_fault commit 2dd23cc4d0e6aa55cf9fb3b05f2f4165b01de81c upstream. In mon_bin_vma_fault(): offset = vmf->pgoff << PAGE_SHIFT; if (offset >= rp->b_size) return VM_FAULT_SIGBUS; chunk_idx = offset / CHUNK_SIZE; pageptr = rp->b_vec[chunk_idx].pg; The code is executed without holding any lock. In mon_bin_vma_close(): spin_lock_irqsave(&rp->b_lock, flags); rp->mmap_active--; spin_unlock_irqrestore(&rp->b_lock, flags); In mon_bin_ioctl(): spin_lock_irqsave(&rp->b_lock, flags); if (rp->mmap_active) { ... } else { ... kfree(rp->b_vec); rp->b_vec = vec; rp->b_size = size; ... } spin_unlock_irqrestore(&rp->b_lock, flags); Concurrent execution of mon_bin_vma_fault() with mon_bin_vma_close() and mon_bin_ioctl() could lead to atomicity violations. mon_bin_vma_fault() accesses rp->b_size and rp->b_vec without locking, risking array out-of-bounds access or use-after-free bugs due to possible modifications in mon_bin_ioctl(). This possible bug is found by an experimental static analysis tool developed by our team, BassCheck[1]. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported when our tool analyzes the source code of Linux 6.2. To address this issue, it is proposed to add a spin lock pair in mon_bin_vma_fault() to ensure atomicity. With this patch applied, our tool never reports the possible bug, with the kernel configuration allyesconfig for x86_64. Due to the lack of associated hardware, we cannot test the patch in runtime testing, and just verify it according to the code logic. [1] https://sites.google.com/view/basscheck/ Fixes: 19e6317d24c2 ("usb: mon: Fix a deadlock in usbmon between ...") Cc: Signed-off-by: Gui-Dong Han <2045gemini@gmail.com> Link: https://lore.kernel.org/r/20240105052412.9377-1-2045gemini@gmail.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Greg Kroah-Hartman --- drivers/usb/mon/mon_bin.c | 7 ++++++- 1 file changed, 6 insertions(+), 1 deletion(-) diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index 094e812e9e69..35483217b1f6 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -1247,14 +1247,19 @@ static vm_fault_t mon_bin_vma_fault(struct vm_fault *vmf) struct mon_reader_bin *rp = vmf->vma->vm_private_data; unsigned long offset, chunk_idx; struct page *pageptr; + unsigned long flags; + spin_lock_irqsave(&rp->b_lock, flags); offset = vmf->pgoff << PAGE_SHIFT; - if (offset >= rp->b_size) + if (offset >= rp->b_size) { + spin_unlock_irqrestore(&rp->b_lock, flags); return VM_FAULT_SIGBUS; + } chunk_idx = offset / CHUNK_SIZE; pageptr = rp->b_vec[chunk_idx].pg; get_page(pageptr); vmf->page = pageptr; + spin_unlock_irqrestore(&rp->b_lock, flags); return 0; } From 57f34589e954b3153ff72609e0bb4c225045394c Mon Sep 17 00:00:00 2001 From: Christoph Niedermaier Date: Tue, 26 Dec 2023 12:36:47 +0100 Subject: [PATCH 219/288] serial: imx: Ensure that imx_uart_rs485_config() is called with enabled clock commit 7c45eaa813476bd195ac1227a64b52f9cf2e2030 upstream. There are register accesses in the function imx_uart_rs485_config(). The clock must be enabled for these accesses. This was ensured by calling it via the function uart_rs485_config() in the probe() function within the range where the clock is enabled. With the commit 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way") it was removed from the probe() function and is now only called through the function uart_add_one_port() which is located at the end of the probe() function. But the clock is already switched off in this area. To ensure that the clock is enabled during register access, move the disabling of the clock to the very end of the probe() function. To avoid leaking enabled clocks on error also add an error path for exiting with disabling the clock. Fixes: 7c7f9bc986e6 ("serial: Deassert Transmit Enable on probe in driver-specific way") Cc: stable Signed-off-by: Christoph Niedermaier Reviewed-by: Lukas Wunner Link: https://lore.kernel.org/r/20231226113647.39376-1-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/imx.c | 23 ++++++++++++----------- 1 file changed, 12 insertions(+), 11 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 164597e2e004..f236e4738b78 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2358,10 +2358,8 @@ static int imx_uart_probe(struct platform_device *pdev) sport->ufcr = readl(sport->port.membase + UFCR); ret = uart_get_rs485_mode(&sport->port); - if (ret) { - clk_disable_unprepare(sport->clk_ipg); - return ret; - } + if (ret) + goto err_clk; if (sport->port.rs485.flags & SER_RS485_ENABLED && (!sport->have_rtscts && !sport->have_rtsgpio)) @@ -2415,8 +2413,6 @@ static int imx_uart_probe(struct platform_device *pdev) imx_uart_writel(sport, ucr3, UCR3); } - clk_disable_unprepare(sport->clk_ipg); - hrtimer_init(&sport->trigger_start_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL); hrtimer_init(&sport->trigger_stop_tx, CLOCK_MONOTONIC, HRTIMER_MODE_REL); sport->trigger_start_tx.function = imx_trigger_start_tx; @@ -2432,7 +2428,7 @@ static int imx_uart_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "failed to request rx irq: %d\n", ret); - return ret; + goto err_clk; } ret = devm_request_irq(&pdev->dev, txirq, imx_uart_txint, 0, @@ -2440,7 +2436,7 @@ static int imx_uart_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "failed to request tx irq: %d\n", ret); - return ret; + goto err_clk; } ret = devm_request_irq(&pdev->dev, rtsirq, imx_uart_rtsint, 0, @@ -2448,14 +2444,14 @@ static int imx_uart_probe(struct platform_device *pdev) if (ret) { dev_err(&pdev->dev, "failed to request rts irq: %d\n", ret); - return ret; + goto err_clk; } } else { ret = devm_request_irq(&pdev->dev, rxirq, imx_uart_int, 0, dev_name(&pdev->dev), sport); if (ret) { dev_err(&pdev->dev, "failed to request irq: %d\n", ret); - return ret; + goto err_clk; } } @@ -2463,7 +2459,12 @@ static int imx_uart_probe(struct platform_device *pdev) platform_set_drvdata(pdev, sport); - return uart_add_one_port(&imx_uart_uart_driver, &sport->port); + ret = uart_add_one_port(&imx_uart_uart_driver, &sport->port); + +err_clk: + clk_disable_unprepare(sport->clk_ipg); + + return ret; } static int imx_uart_remove(struct platform_device *pdev) From b5c2a32621aef23902b575156336ca4aead4f22e Mon Sep 17 00:00:00 2001 From: Takashi Iwai Date: Fri, 12 Jan 2024 12:10:23 +0100 Subject: [PATCH 220/288] ALSA: oxygen: Fix right channel of capture volume mixer commit a03cfad512ac24a35184d7d87ec0d5489e1cb763 upstream. There was a typo in oxygen mixer code that didn't update the right channel value properly for the capture volume. Let's fix it. This trivial fix was originally reported on Bugzilla. Fixes: a3601560496d ("[ALSA] oxygen: add front panel controls") Cc: Link: https://bugzilla.kernel.org/show_bug.cgi?id=156561 Link: https://lore.kernel.org/r/20240112111023.6208-1-tiwai@suse.de Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/oxygen/oxygen_mixer.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/sound/pci/oxygen/oxygen_mixer.c b/sound/pci/oxygen/oxygen_mixer.c index 46705ec77b48..eb3aca16359c 100644 --- a/sound/pci/oxygen/oxygen_mixer.c +++ b/sound/pci/oxygen/oxygen_mixer.c @@ -718,7 +718,7 @@ static int ac97_fp_rec_volume_put(struct snd_kcontrol *ctl, oldreg = oxygen_read_ac97(chip, 1, AC97_REC_GAIN); newreg = oldreg & ~0x0707; newreg = newreg | (value->value.integer.value[0] & 7); - newreg = newreg | ((value->value.integer.value[0] & 7) << 8); + newreg = newreg | ((value->value.integer.value[1] & 7) << 8); change = newreg != oldreg; if (change) oxygen_write_ac97(chip, 1, AC97_REC_GAIN, newreg); From ff2d54d9ccb4697eecb3335e546dc68fc67dff26 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?=C3=87a=C4=9Fhan=20Demir?= Date: Mon, 15 Jan 2024 20:23:03 +0300 Subject: [PATCH 221/288] ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq2xxx MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit bc7863d18677df66b2c7a0e172c91296ff380f11 upstream. This HP Laptop uses ALC236 codec with COEF 0x07 idx 1 controlling the mute LED. This patch enables the already existing quirk for this device. Signed-off-by: Çağhan Demir Cc: Link: https://lore.kernel.org/r/20240115172303.4718-1-caghandemir@marun.edu.tr Signed-off-by: Takashi Iwai Signed-off-by: Greg Kroah-Hartman --- sound/pci/hda/patch_realtek.c | 1 + 1 file changed, 1 insertion(+) diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index c7e76bfad84d..412fbe098e0c 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -9034,6 +9034,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = { SND_PCI_QUIRK(0x103c, 0x87f5, "HP", ALC287_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x87f6, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP), SND_PCI_QUIRK(0x103c, 0x87f7, "HP Spectre x360 14", ALC245_FIXUP_HP_X360_AMP), + SND_PCI_QUIRK(0x103c, 0x87fe, "HP Laptop 15s-fq2xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2), SND_PCI_QUIRK(0x103c, 0x8805, "HP ProBook 650 G8 Notebook PC", ALC236_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x880d, "HP EliteBook 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED), SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1), From a7d4ec5672b52dfaec93de6547f60c37cb1a93e8 Mon Sep 17 00:00:00 2001 From: Nam Cao Date: Mon, 18 Dec 2023 10:57:30 +0100 Subject: [PATCH 222/288] fbdev: flush deferred work in fb_deferred_io_fsync() commit 15e4c1f462279b4e128f27de48133e0debe9e0df upstream. The driver's fsync() is supposed to flush any pending operation to hardware. It is implemented in this driver by cancelling the queued deferred IO first, then schedule it for "immediate execution" by calling schedule_delayed_work() again with delay=0. However, setting delay=0 only means the work is scheduled immediately, it does not mean the work is executed immediately. There is no guarantee that the work is finished after schedule_delayed_work() returns. After this driver's fsync() returns, there can still be pending work. Furthermore, if close() is called by users immediately after fsync(), the pending work gets cancelled and fsync() may do nothing. To ensure that the deferred IO completes, use flush_delayed_work() instead. Write operations to this driver either write to the device directly, or invoke schedule_delayed_work(); so by flushing the workqueue, it can be guaranteed that all previous writes make it to the device. Fixes: 5e841b88d23d ("fb: fsync() method for deferred I/O flush.") Cc: stable@vger.kernel.org Signed-off-by: Nam Cao Reviewed-by: Sebastian Andrzej Siewior Signed-off-by: Helge Deller Signed-off-by: Greg Kroah-Hartman --- drivers/video/fbdev/core/fb_defio.c | 6 +----- 1 file changed, 1 insertion(+), 5 deletions(-) diff --git a/drivers/video/fbdev/core/fb_defio.c b/drivers/video/fbdev/core/fb_defio.c index a591d291b231..0708e214c5a3 100644 --- a/drivers/video/fbdev/core/fb_defio.c +++ b/drivers/video/fbdev/core/fb_defio.c @@ -78,11 +78,7 @@ int fb_deferred_io_fsync(struct file *file, loff_t start, loff_t end, int datasy return 0; inode_lock(inode); - /* Kill off the delayed work */ - cancel_delayed_work_sync(&info->deferred_work); - - /* Run it immediately */ - schedule_delayed_work(&info->deferred_work, 0); + flush_delayed_work(&info->deferred_work); inode_unlock(inode); return 0; From daa61bacd3b99e70b1259ef5075e9c2e8edf9a1f Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Sat, 6 Jan 2024 15:13:03 +0100 Subject: [PATCH 223/288] pwm: jz4740: Don't use dev_err_probe() in .request() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 9320fc509b87b4d795fb37112931e2f4f8b5c55f upstream. dev_err_probe() is only supposed to be used in probe functions. While it probably doesn't hurt, both the EPROBE_DEFER handling and calling device_set_deferred_probe_reason() are conceptually wrong in the request callback. So replace the call by dev_err() and a separate return statement. This effectively reverts commit c0bfe9606e03 ("pwm: jz4740: Simplify with dev_err_probe()"). Reviewed-by: Krzysztof Kozlowski Link: https://lore.kernel.org/r/20240106141302.1253365-2-u.kleine-koenig@pengutronix.de Fixes: c0bfe9606e03 ("pwm: jz4740: Simplify with dev_err_probe()") Cc: stable@vger.kernel.org Signed-off-by: Uwe Kleine-König Signed-off-by: Greg Kroah-Hartman --- drivers/pwm/pwm-jz4740.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/pwm/pwm-jz4740.c b/drivers/pwm/pwm-jz4740.c index 00c642fa2eed..db951a37c048 100644 --- a/drivers/pwm/pwm-jz4740.c +++ b/drivers/pwm/pwm-jz4740.c @@ -60,9 +60,10 @@ static int jz4740_pwm_request(struct pwm_chip *chip, struct pwm_device *pwm) snprintf(name, sizeof(name), "timer%u", pwm->hwpwm); clk = clk_get(chip->dev, name); - if (IS_ERR(clk)) - return dev_err_probe(chip->dev, PTR_ERR(clk), - "Failed to get clock\n"); + if (IS_ERR(clk)) { + dev_err(chip->dev, "error %pe: Failed to get clock\n", clk); + return PTR_ERR(clk); + } err = clk_prepare_enable(clk); if (err < 0) { From 8c0b563e9b4d5a4bed51667816e487120d2eb696 Mon Sep 17 00:00:00 2001 From: Jens Axboe Date: Mon, 22 Jan 2024 12:30:07 -0700 Subject: [PATCH 224/288] io_uring/rw: ensure io->bytes_done is always initialized commit 0a535eddbe0dc1de4386046ab849f08aeb2f8faf upstream. If IOSQE_ASYNC is set and we fail importing an iovec for a readv or writev request, then we leave ->bytes_done uninitialized and hence the eventual failure CQE posted can potentially have a random res value rather than the expected -EINVAL. Setup ->bytes_done before potentially failing, so we have a consistent value if we fail the request early. Cc: stable@vger.kernel.org Reported-by: xingwei lee Signed-off-by: Jens Axboe Signed-off-by: Greg Kroah-Hartman --- io_uring/io_uring.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/io_uring/io_uring.c b/io_uring/io_uring.c index aa15e8d878a9..936abc6ee450 100644 --- a/io_uring/io_uring.c +++ b/io_uring/io_uring.c @@ -3485,14 +3485,17 @@ static inline int io_rw_prep_async(struct io_kiocb *req, int rw) struct iovec *iov = iorw->fast_iov; int ret; + iorw->bytes_done = 0; + iorw->free_iovec = NULL; + ret = io_import_iovec(rw, req, &iov, &iorw->iter, false); if (unlikely(ret < 0)) return ret; - iorw->bytes_done = 0; - iorw->free_iovec = iov; - if (iov) + if (iov) { + iorw->free_iovec = iov; req->flags |= REQ_F_NEED_CLEANUP; + } iov_iter_save_state(&iorw->iter, &iorw->iter_state); return 0; } From 3b8d7a1b851918cc3529a38a271c7a0ea8ad1217 Mon Sep 17 00:00:00 2001 From: Stefan Berger Date: Sun, 19 Nov 2023 20:12:48 -0500 Subject: [PATCH 225/288] rootfs: Fix support for rootfstype= when root= is given commit 21528c69a0d8483f7c6345b1a0bc8d8975e9a172 upstream. Documentation/filesystems/ramfs-rootfs-initramfs.rst states: If CONFIG_TMPFS is enabled, rootfs will use tmpfs instead of ramfs by default. To force ramfs, add "rootfstype=ramfs" to the kernel command line. This currently does not work when root= is provided since then saved_root_name contains a string and rootfstype= is ignored. Therefore, ramfs is currently always chosen when root= is provided. The current behavior for rootfs's filesystem is: root= | rootfstype= | chosen rootfs filesystem ------------+-------------+-------------------------- unspecified | unspecified | tmpfs unspecified | tmpfs | tmpfs unspecified | ramfs | ramfs provided | ignored | ramfs rootfstype= should be respected regardless whether root= is given, as shown below: root= | rootfstype= | chosen rootfs filesystem ------------+-------------+-------------------------- unspecified | unspecified | tmpfs (as before) unspecified | tmpfs | tmpfs (as before) unspecified | ramfs | ramfs (as before) provided | unspecified | ramfs (compatibility with before) provided | tmpfs | tmpfs (new) provided | ramfs | ramfs (new) This table represents the new behavior. Fixes: 6e19eded3684 ("initmpfs: use initramfs if rootfstype= or root= specified") Cc: Signed-off-by: Rob Landley Link: https://lore.kernel.org/lkml/8244c75f-445e-b15b-9dbf-266e7ca666e2@landley.net/ Reviewed-and-Tested-by: Mimi Zohar Signed-off-by: Stefan Berger Link: https://lore.kernel.org/r/20231120011248.396012-1-stefanb@linux.ibm.com Signed-off-by: Greg Kroah-Hartman --- init/do_mounts.c | 9 ++++++--- 1 file changed, 6 insertions(+), 3 deletions(-) diff --git a/init/do_mounts.c b/init/do_mounts.c index b5f9604d0c98..8ef154fb418c 100644 --- a/init/do_mounts.c +++ b/init/do_mounts.c @@ -649,7 +649,10 @@ struct file_system_type rootfs_fs_type = { void __init init_rootfs(void) { - if (IS_ENABLED(CONFIG_TMPFS) && !saved_root_name[0] && - (!root_fs_names || strstr(root_fs_names, "tmpfs"))) - is_tmpfs = true; + if (IS_ENABLED(CONFIG_TMPFS)) { + if (!saved_root_name[0] && !root_fs_names) + is_tmpfs = true; + else if (root_fs_names && !!strstr(root_fs_names, "tmpfs")) + is_tmpfs = true; + } } From 394c6c0b6d9bdd7d6ebca35ca9cfbabf44c0c257 Mon Sep 17 00:00:00 2001 From: Gui-Dong Han <2045gemini@gmail.com> Date: Fri, 22 Dec 2023 23:12:41 +0800 Subject: [PATCH 226/288] Bluetooth: Fix atomicity violation in {min,max}_key_size_set commit da9065caa594d19b26e1a030fd0cc27bd365d685 upstream. In min_key_size_set(): if (val > hdev->le_max_key_size || val < SMP_MIN_ENC_KEY_SIZE) return -EINVAL; hci_dev_lock(hdev); hdev->le_min_key_size = val; hci_dev_unlock(hdev); In max_key_size_set(): if (val > SMP_MAX_ENC_KEY_SIZE || val < hdev->le_min_key_size) return -EINVAL; hci_dev_lock(hdev); hdev->le_max_key_size = val; hci_dev_unlock(hdev); The atomicity violation occurs due to concurrent execution of set_min and set_max funcs.Consider a scenario where setmin writes a new, valid 'min' value, and concurrently, setmax writes a value that is greater than the old 'min' but smaller than the new 'min'. In this case, setmax might check against the old 'min' value (before acquiring the lock) but write its value after the 'min' has been updated by setmin. This leads to a situation where the 'max' value ends up being smaller than the 'min' value, which is an inconsistency. This possible bug is found by an experimental static analysis tool developed by our team, BassCheck[1]. This tool analyzes the locking APIs to extract function pairs that can be concurrently executed, and then analyzes the instructions in the paired functions to identify possible concurrency bugs including data races and atomicity violations. The above possible bug is reported when our tool analyzes the source code of Linux 5.17. To resolve this issue, it is suggested to encompass the validity checks within the locked sections in both set_min and set_max funcs. The modification ensures that the validation of 'val' against the current min/max values is atomic, thus maintaining the integrity of the settings. With this patch applied, our tool no longer reports the bug, with the kernel configuration allyesconfig for x86_64. Due to the lack of associated hardware, we cannot test the patch in runtime testing, and just verify it according to the code logic. [1] https://sites.google.com/view/basscheck/ Fixes: 18f81241b74f ("Bluetooth: Move {min,max}_key_size debugfs ...") Cc: stable@vger.kernel.org Signed-off-by: Gui-Dong Han <2045gemini@gmail.com> Signed-off-by: Luiz Augusto von Dentz Signed-off-by: Greg Kroah-Hartman --- net/bluetooth/hci_debugfs.c | 16 ++++++++++------ 1 file changed, 10 insertions(+), 6 deletions(-) diff --git a/net/bluetooth/hci_debugfs.c b/net/bluetooth/hci_debugfs.c index 338833f12365..d4efc4aa55af 100644 --- a/net/bluetooth/hci_debugfs.c +++ b/net/bluetooth/hci_debugfs.c @@ -994,10 +994,12 @@ static int min_key_size_set(void *data, u64 val) { struct hci_dev *hdev = data; - if (val > hdev->le_max_key_size || val < SMP_MIN_ENC_KEY_SIZE) - return -EINVAL; - hci_dev_lock(hdev); + if (val > hdev->le_max_key_size || val < SMP_MIN_ENC_KEY_SIZE) { + hci_dev_unlock(hdev); + return -EINVAL; + } + hdev->le_min_key_size = val; hci_dev_unlock(hdev); @@ -1022,10 +1024,12 @@ static int max_key_size_set(void *data, u64 val) { struct hci_dev *hdev = data; - if (val > SMP_MAX_ENC_KEY_SIZE || val < hdev->le_min_key_size) - return -EINVAL; - hci_dev_lock(hdev); + if (val > SMP_MAX_ENC_KEY_SIZE || val < hdev->le_min_key_size) { + hci_dev_unlock(hdev); + return -EINVAL; + } + hdev->le_max_key_size = val; hci_dev_unlock(hdev); From 5e9142b6a2000022fbae02ecefd36645dfc82a8b Mon Sep 17 00:00:00 2001 From: Rob Clark Date: Sun, 10 Dec 2023 10:06:53 -0800 Subject: [PATCH 227/288] iommu/arm-smmu-qcom: Add missing GMU entry to match table commit afc95681c3068956fed1241a1ff1612c066c75ac upstream. In some cases the firmware expects cbndx 1 to be assigned to the GMU, so we also want the default domain for the GMU to be an identy domain. This way it does not get a context bank assigned. Without this, both of_dma_configure() and drm/msm's iommu_domain_attach() will trigger allocating and configuring a context bank. So GMU ends up attached to both cbndx 1 and later cbndx 2. This arrangement seemingly confounds and surprises the firmware if the GPU later triggers a translation fault, resulting (on sc8280xp / lenovo x13s, at least) in the SMMU getting wedged and the GPU stuck without memory access. Cc: stable@vger.kernel.org Signed-off-by: Rob Clark Tested-by: Johan Hovold Reviewed-by: Robin Murphy Link: https://lore.kernel.org/r/20231210180655.75542-1-robdclark@gmail.com Signed-off-by: Will Deacon Signed-off-by: Greg Kroah-Hartman --- drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c index 1598a1ddbf69..a5164d5cb6a3 100644 --- a/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c +++ b/drivers/iommu/arm/arm-smmu/arm-smmu-qcom.c @@ -21,6 +21,7 @@ static struct qcom_smmu *to_qcom_smmu(struct arm_smmu_device *smmu) static const struct of_device_id qcom_smmu_client_of_match[] __maybe_unused = { { .compatible = "qcom,adreno" }, + { .compatible = "qcom,adreno-gmu" }, { .compatible = "qcom,mdp4" }, { .compatible = "qcom,mdss" }, { .compatible = "qcom,sc7180-mdss" }, From 3dc3122b0be3027ba598d70ef90a90bf135e0cc9 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 24 Nov 2023 10:47:16 +0200 Subject: [PATCH 228/288] wifi: rtlwifi: Remove bogus and dangerous ASPM disable/enable code MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit b3943b3c2971444364e03224cfc828c5789deada upstream. Ever since introduction in the commit 0c8173385e54 ("rtl8192ce: Add new driver") the rtlwifi code has, according to comments, attempted to disable/enable ASPM of the upstream bridge by writing into its LNKCTL register. However, the code has never been correct because it performs the writes to the device instead of the upstream bridge. Worse yet, the offset where the PCIe capabilities reside is derived from the offset of the upstream bridge. As a result, the write will use an offset on the device that does not relate to the LNKCTL register making the ASPM disable/enable code outright dangerous. Because of those problems, there is no indication that the driver needs disable/enable ASPM on the upstream bridge. As the Capabilities offset is not correctly calculated for the write to target device's LNKCTL register, the code is not disabling/enabling device's ASPM either. Therefore, just remove the upstream bridge related ASPM disable/enable code entirely. The upstream bridge related ASPM code was the only user of the struct mp_adapter members num4bytes, pcibridge_pciehdr_offset, and pcibridge_linkctrlreg so those are removed as well. Note: This change does not remove the code related to changing the device's ASPM on purpose (which is independent of this flawed code related to upstream bridge's ASPM). Suggested-by: Bjorn Helgaas Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Fixes: 886e14b65a8f ("rtlwifi: Eliminate raw reads and writes from PCIe portion") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231124084725.12738-2-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/realtek/rtlwifi/pci.c | 58 +--------------------- drivers/net/wireless/realtek/rtlwifi/pci.h | 5 -- 2 files changed, 1 insertion(+), 62 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c index 3776495fd9d0..da15571e767d 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -192,11 +192,8 @@ static void rtl_pci_disable_aspm(struct ieee80211_hw *hw) struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); u8 pcibridge_vendor = pcipriv->ndis_adapter.pcibridge_vendor; - u8 num4bytes = pcipriv->ndis_adapter.num4bytes; /*Retrieve original configuration settings. */ u8 linkctrl_reg = pcipriv->ndis_adapter.linkctrl_reg; - u16 pcibridge_linkctrlreg = pcipriv->ndis_adapter. - pcibridge_linkctrlreg; u16 aspmlevel = 0; u8 tmp_u1b = 0; @@ -221,16 +218,8 @@ static void rtl_pci_disable_aspm(struct ieee80211_hw *hw) /*Set corresponding value. */ aspmlevel |= BIT(0) | BIT(1); linkctrl_reg &= ~aspmlevel; - pcibridge_linkctrlreg &= ~(BIT(0) | BIT(1)); _rtl_pci_platform_switch_device_pci_aspm(hw, linkctrl_reg); - udelay(50); - - /*4 Disable Pci Bridge ASPM */ - pci_write_config_byte(rtlpci->pdev, (num4bytes << 2), - pcibridge_linkctrlreg); - - udelay(50); } /*Enable RTL8192SE ASPM & Enable Pci Bridge ASPM for @@ -245,9 +234,7 @@ static void rtl_pci_enable_aspm(struct ieee80211_hw *hw) struct rtl_ps_ctl *ppsc = rtl_psc(rtl_priv(hw)); struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); u8 pcibridge_vendor = pcipriv->ndis_adapter.pcibridge_vendor; - u8 num4bytes = pcipriv->ndis_adapter.num4bytes; u16 aspmlevel; - u8 u_pcibridge_aspmsetting; u8 u_device_aspmsetting; if (!ppsc->support_aspm) @@ -259,25 +246,6 @@ static void rtl_pci_enable_aspm(struct ieee80211_hw *hw) return; } - /*4 Enable Pci Bridge ASPM */ - - u_pcibridge_aspmsetting = - pcipriv->ndis_adapter.pcibridge_linkctrlreg | - rtlpci->const_hostpci_aspm_setting; - - if (pcibridge_vendor == PCI_BRIDGE_VENDOR_INTEL) - u_pcibridge_aspmsetting &= ~BIT(0); - - pci_write_config_byte(rtlpci->pdev, (num4bytes << 2), - u_pcibridge_aspmsetting); - - rtl_dbg(rtlpriv, COMP_INIT, DBG_LOUD, - "PlatformEnableASPM(): Write reg[%x] = %x\n", - (pcipriv->ndis_adapter.pcibridge_pciehdr_offset + 0x10), - u_pcibridge_aspmsetting); - - udelay(50); - /*Get ASPM level (with/without Clock Req) */ aspmlevel = rtlpci->const_devicepci_aspm_setting; u_device_aspmsetting = pcipriv->ndis_adapter.linkctrl_reg; @@ -359,22 +327,6 @@ static bool rtl_pci_check_buddy_priv(struct ieee80211_hw *hw, return find_buddy_priv; } -static void rtl_pci_get_linkcontrol_field(struct ieee80211_hw *hw) -{ - struct rtl_pci_priv *pcipriv = rtl_pcipriv(hw); - struct rtl_pci *rtlpci = rtl_pcidev(pcipriv); - u8 capabilityoffset = pcipriv->ndis_adapter.pcibridge_pciehdr_offset; - u8 linkctrl_reg; - u8 num4bbytes; - - num4bbytes = (capabilityoffset + 0x10) / 4; - - /*Read Link Control Register */ - pci_read_config_byte(rtlpci->pdev, (num4bbytes << 2), &linkctrl_reg); - - pcipriv->ndis_adapter.pcibridge_linkctrlreg = linkctrl_reg; -} - static void rtl_pci_parse_configuration(struct pci_dev *pdev, struct ieee80211_hw *hw) { @@ -2035,12 +1987,6 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, PCI_SLOT(bridge_pdev->devfn); pcipriv->ndis_adapter.pcibridge_funcnum = PCI_FUNC(bridge_pdev->devfn); - pcipriv->ndis_adapter.pcibridge_pciehdr_offset = - pci_pcie_cap(bridge_pdev); - pcipriv->ndis_adapter.num4bytes = - (pcipriv->ndis_adapter.pcibridge_pciehdr_offset + 0x10) / 4; - - rtl_pci_get_linkcontrol_field(hw); if (pcipriv->ndis_adapter.pcibridge_vendor == PCI_BRIDGE_VENDOR_AMD) { @@ -2057,13 +2003,11 @@ static bool _rtl_pci_find_adapter(struct pci_dev *pdev, pdev->vendor, pcipriv->ndis_adapter.linkctrl_reg); rtl_dbg(rtlpriv, COMP_INIT, DBG_DMESG, - "pci_bridge busnumber:devnumber:funcnumber:vendor:pcie_cap:link_ctl_reg:amd %d:%d:%d:%x:%x:%x:%x\n", + "pci_bridge busnumber:devnumber:funcnumber:vendor:amd %d:%d:%d:%x:%x\n", pcipriv->ndis_adapter.pcibridge_busnum, pcipriv->ndis_adapter.pcibridge_devnum, pcipriv->ndis_adapter.pcibridge_funcnum, pcibridge_vendors[pcipriv->ndis_adapter.pcibridge_vendor], - pcipriv->ndis_adapter.pcibridge_pciehdr_offset, - pcipriv->ndis_adapter.pcibridge_linkctrlreg, pcipriv->ndis_adapter.amd_l1_patch); rtl_pci_parse_configuration(pdev, hw); diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.h b/drivers/net/wireless/realtek/rtlwifi/pci.h index 866861626a0a..d6307197dfea 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.h +++ b/drivers/net/wireless/realtek/rtlwifi/pci.h @@ -236,11 +236,6 @@ struct mp_adapter { u16 pcibridge_vendorid; u16 pcibridge_deviceid; - u8 num4bytes; - - u8 pcibridge_pciehdr_offset; - u8 pcibridge_linkctrlreg; - bool amd_l1_patch; }; From ba8a4fba622acc624f4183233cbdc6687d4fad2d Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ilpo=20J=C3=A4rvinen?= Date: Fri, 24 Nov 2023 10:47:17 +0200 Subject: [PATCH 229/288] wifi: rtlwifi: Convert LNKCTL change to PCIe cap RMW accessors MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit 5894d0089cbc146063dcc0239a78ede0a8142efb upstream. The rtlwifi driver comes with custom code to write into PCIe Link Control register. RMW access for the Link Control register requires locking that is already provided by the standard PCIe capability accessors. Convert the custom RMW code writing into LNKCTL register to standard RMW capability accessors. The accesses are changed to cover the full LNKCTL register instead of touching just a single byte of the register. Fixes: 0c8173385e54 ("rtl8192ce: Add new driver") Cc: stable@vger.kernel.org Signed-off-by: Ilpo Järvinen Signed-off-by: Kalle Valo Link: https://lore.kernel.org/r/20231124084725.12738-3-ilpo.jarvinen@linux.intel.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/realtek/rtlwifi/pci.c | 23 +++++++++++++++------- 1 file changed, 16 insertions(+), 7 deletions(-) diff --git a/drivers/net/wireless/realtek/rtlwifi/pci.c b/drivers/net/wireless/realtek/rtlwifi/pci.c index da15571e767d..679ae786cf45 100644 --- a/drivers/net/wireless/realtek/rtlwifi/pci.c +++ b/drivers/net/wireless/realtek/rtlwifi/pci.c @@ -164,21 +164,29 @@ static bool _rtl_pci_platform_switch_device_pci_aspm( struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); - if (rtlhal->hw_type != HARDWARE_TYPE_RTL8192SE) - value |= 0x40; + value &= PCI_EXP_LNKCTL_ASPMC; - pci_write_config_byte(rtlpci->pdev, 0x80, value); + if (rtlhal->hw_type != HARDWARE_TYPE_RTL8192SE) + value |= PCI_EXP_LNKCTL_CCC; + + pcie_capability_clear_and_set_word(rtlpci->pdev, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_ASPMC | value, + value); return false; } -/*When we set 0x01 to enable clk request. Set 0x0 to disable clk req.*/ -static void _rtl_pci_switch_clk_req(struct ieee80211_hw *hw, u8 value) +/* @value is PCI_EXP_LNKCTL_CLKREQ_EN or 0 to enable/disable clk request. */ +static void _rtl_pci_switch_clk_req(struct ieee80211_hw *hw, u16 value) { struct rtl_pci *rtlpci = rtl_pcidev(rtl_pcipriv(hw)); struct rtl_hal *rtlhal = rtl_hal(rtl_priv(hw)); - pci_write_config_byte(rtlpci->pdev, 0x81, value); + value &= PCI_EXP_LNKCTL_CLKREQ_EN; + + pcie_capability_clear_and_set_word(rtlpci->pdev, PCI_EXP_LNKCTL, + PCI_EXP_LNKCTL_CLKREQ_EN, + value); if (rtlhal->hw_type == HARDWARE_TYPE_RTL8192SE) udelay(100); @@ -259,7 +267,8 @@ static void rtl_pci_enable_aspm(struct ieee80211_hw *hw) if (ppsc->reg_rfps_level & RT_RF_OFF_LEVL_CLK_REQ) { _rtl_pci_switch_clk_req(hw, (ppsc->reg_rfps_level & - RT_RF_OFF_LEVL_CLK_REQ) ? 1 : 0); + RT_RF_OFF_LEVL_CLK_REQ) ? + PCI_EXP_LNKCTL_CLKREQ_EN : 0); RT_SET_PS_LEVEL(ppsc, RT_RF_OFF_LEVL_CLK_REQ); } udelay(100); From 322c5fe40f7f57e576d14a61faf1804f4440849f Mon Sep 17 00:00:00 2001 From: David Lin Date: Fri, 15 Dec 2023 08:51:18 +0800 Subject: [PATCH 230/288] wifi: mwifiex: configure BSSID consistently when starting AP commit f0dd488e11e71ac095df7638d892209c629d9af2 upstream. AP BSSID configuration is missing at AP start. Without this fix, FW returns STA interface MAC address after first init. When hostapd restarts, it gets MAC address from netdev before driver sets STA MAC to netdev again. Now MAC address between hostapd and net interface are different causes STA cannot connect to AP. After that MAC address of uap0 mlan0 become the same. And issue disappears after following hostapd restart (another issue is AP/STA MAC address become the same). This patch fixes the issue cleanly. Signed-off-by: David Lin Fixes: 12190c5d80bd ("mwifiex: add cfg80211 start_ap and stop_ap handlers") Cc: stable@vger.kernel.org Reviewed-by: Francesco Dolcini Tested-by: Rafael Beims # Verdin iMX8MP/SD8997 SD Acked-by: Brian Norris Signed-off-by: Kalle Valo Link: https://msgid.link/20231215005118.17031-1-yu-hao.lin@nxp.com Signed-off-by: Greg Kroah-Hartman --- drivers/net/wireless/marvell/mwifiex/cfg80211.c | 2 ++ drivers/net/wireless/marvell/mwifiex/fw.h | 1 + drivers/net/wireless/marvell/mwifiex/ioctl.h | 1 + drivers/net/wireless/marvell/mwifiex/uap_cmd.c | 8 ++++++++ 4 files changed, 12 insertions(+) diff --git a/drivers/net/wireless/marvell/mwifiex/cfg80211.c b/drivers/net/wireless/marvell/mwifiex/cfg80211.c index 3d1b5d3d295a..2f5f1ff22a60 100644 --- a/drivers/net/wireless/marvell/mwifiex/cfg80211.c +++ b/drivers/net/wireless/marvell/mwifiex/cfg80211.c @@ -1980,6 +1980,8 @@ static int mwifiex_cfg80211_start_ap(struct wiphy *wiphy, mwifiex_set_sys_config_invalid_data(bss_cfg); + memcpy(bss_cfg->mac_addr, priv->curr_addr, ETH_ALEN); + if (params->beacon_interval) bss_cfg->beacon_period = params->beacon_interval; if (params->dtim_period) diff --git a/drivers/net/wireless/marvell/mwifiex/fw.h b/drivers/net/wireless/marvell/mwifiex/fw.h index 470d669c7f14..96c42b979e9b 100644 --- a/drivers/net/wireless/marvell/mwifiex/fw.h +++ b/drivers/net/wireless/marvell/mwifiex/fw.h @@ -177,6 +177,7 @@ enum MWIFIEX_802_11_PRIVACY_FILTER { #define TLV_TYPE_STA_MAC_ADDR (PROPRIETARY_TLV_BASE_ID + 32) #define TLV_TYPE_BSSID (PROPRIETARY_TLV_BASE_ID + 35) #define TLV_TYPE_CHANNELBANDLIST (PROPRIETARY_TLV_BASE_ID + 42) +#define TLV_TYPE_UAP_MAC_ADDRESS (PROPRIETARY_TLV_BASE_ID + 43) #define TLV_TYPE_UAP_BEACON_PERIOD (PROPRIETARY_TLV_BASE_ID + 44) #define TLV_TYPE_UAP_DTIM_PERIOD (PROPRIETARY_TLV_BASE_ID + 45) #define TLV_TYPE_UAP_BCAST_SSID (PROPRIETARY_TLV_BASE_ID + 48) diff --git a/drivers/net/wireless/marvell/mwifiex/ioctl.h b/drivers/net/wireless/marvell/mwifiex/ioctl.h index 3db449efa167..cdb5b3881782 100644 --- a/drivers/net/wireless/marvell/mwifiex/ioctl.h +++ b/drivers/net/wireless/marvell/mwifiex/ioctl.h @@ -119,6 +119,7 @@ struct mwifiex_uap_bss_param { u8 qos_info; u8 power_constraint; struct mwifiex_types_wmm_info wmm_info; + u8 mac_addr[ETH_ALEN]; }; enum { diff --git a/drivers/net/wireless/marvell/mwifiex/uap_cmd.c b/drivers/net/wireless/marvell/mwifiex/uap_cmd.c index b48a85d791f6..2d444e660ac5 100644 --- a/drivers/net/wireless/marvell/mwifiex/uap_cmd.c +++ b/drivers/net/wireless/marvell/mwifiex/uap_cmd.c @@ -479,6 +479,7 @@ void mwifiex_config_uap_11d(struct mwifiex_private *priv, static int mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) { + struct host_cmd_tlv_mac_addr *mac_tlv; struct host_cmd_tlv_dtim_period *dtim_period; struct host_cmd_tlv_beacon_period *beacon_period; struct host_cmd_tlv_ssid *ssid; @@ -498,6 +499,13 @@ mwifiex_uap_bss_param_prepare(u8 *tlv, void *cmd_buf, u16 *param_size) int i; u16 cmd_size = *param_size; + mac_tlv = (struct host_cmd_tlv_mac_addr *)tlv; + mac_tlv->header.type = cpu_to_le16(TLV_TYPE_UAP_MAC_ADDRESS); + mac_tlv->header.len = cpu_to_le16(ETH_ALEN); + memcpy(mac_tlv->mac_addr, bss_cfg->mac_addr, ETH_ALEN); + cmd_size += sizeof(struct host_cmd_tlv_mac_addr); + tlv += sizeof(struct host_cmd_tlv_mac_addr); + if (bss_cfg->ssid.ssid_len) { ssid = (struct host_cmd_tlv_ssid *)tlv; ssid->header.type = cpu_to_le16(TLV_TYPE_UAP_SSID); From 7521ea8f62b29e6e2917660ef1adbb055bdc5695 Mon Sep 17 00:00:00 2001 From: "Kirill A. Shutemov" Date: Tue, 5 Dec 2023 03:45:01 +0300 Subject: [PATCH 231/288] x86/kvm: Do not try to disable kvmclock if it was not enabled commit 1c6d984f523f67ecfad1083bb04c55d91977bb15 upstream. kvm_guest_cpu_offline() tries to disable kvmclock regardless if it is present in the VM. It leads to write to a MSR that doesn't exist on some configurations, namely in TDX guest: unchecked MSR access error: WRMSR to 0x12 (tried to write 0x0000000000000000) at rIP: 0xffffffff8110687c (kvmclock_disable+0x1c/0x30) kvmclock enabling is gated by CLOCKSOURCE and CLOCKSOURCE2 KVM paravirt features. Do not disable kvmclock if it was not enabled. Signed-off-by: Kirill A. Shutemov Fixes: c02027b5742b ("x86/kvm: Disable kvmclock on all CPUs on shutdown") Reviewed-by: Sean Christopherson Reviewed-by: Vitaly Kuznetsov Cc: Paolo Bonzini Cc: Wanpeng Li Cc: stable@vger.kernel.org Message-Id: <20231205004510.27164-6-kirill.shutemov@linux.intel.com> Signed-off-by: Paolo Bonzini Signed-off-by: Greg Kroah-Hartman --- arch/x86/kernel/kvmclock.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/arch/x86/kernel/kvmclock.c b/arch/x86/kernel/kvmclock.c index bb657e2e6c68..b79b4ee49fbd 100644 --- a/arch/x86/kernel/kvmclock.c +++ b/arch/x86/kernel/kvmclock.c @@ -24,8 +24,8 @@ static int kvmclock __initdata = 1; static int kvmclock_vsyscall __initdata = 1; -static int msr_kvm_system_time __ro_after_init = MSR_KVM_SYSTEM_TIME; -static int msr_kvm_wall_clock __ro_after_init = MSR_KVM_WALL_CLOCK; +static int msr_kvm_system_time __ro_after_init; +static int msr_kvm_wall_clock __ro_after_init; static u64 kvm_sched_clock_offset __ro_after_init; static int __init parse_no_kvmclock(char *arg) @@ -196,7 +196,8 @@ static void kvm_setup_secondary_clock(void) void kvmclock_disable(void) { - native_write_msr(msr_kvm_system_time, 0, 0); + if (msr_kvm_system_time) + native_write_msr(msr_kvm_system_time, 0, 0); } static void __init kvmclock_init_mem(void) @@ -292,7 +293,10 @@ void __init kvmclock_init(void) if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE2)) { msr_kvm_system_time = MSR_KVM_SYSTEM_TIME_NEW; msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK_NEW; - } else if (!kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { + } else if (kvm_para_has_feature(KVM_FEATURE_CLOCKSOURCE)) { + msr_kvm_system_time = MSR_KVM_SYSTEM_TIME; + msr_kvm_wall_clock = MSR_KVM_WALL_CLOCK; + } else { return; } From 9b5a278594b9c97438adce4b704148f55de0ece0 Mon Sep 17 00:00:00 2001 From: Marc Zyngier Date: Sun, 17 Dec 2023 11:15:09 +0000 Subject: [PATCH 232/288] KVM: arm64: vgic-v4: Restore pending state on host userspace write commit 7b95382f965133ef61ce44aaabc518c16eb46909 upstream. When the VMM writes to ISPENDR0 to set the state pending state of an SGI, we fail to convey this to the HW if this SGI is already backed by a GICv4.1 vSGI. This is a bit of a corner case, as this would only occur if the vgic state is changed on an already running VM, but this can apparently happen across a guest reset driven by the VMM. Fix this by always writing out the pending_latch value to the HW, and reseting it to false. Reported-by: Kunkun Jiang Signed-off-by: Marc Zyngier Reviewed-by: Zenghui Yu Cc: stable@vger.kernel.org # 5.10+ Link: https://lore.kernel.org/r/7e7f2c0c-448b-10a9-8929-4b8f4f6e2a32@huawei.com Signed-off-by: Greg Kroah-Hartman --- arch/arm64/kvm/vgic/vgic-mmio-v3.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/arch/arm64/kvm/vgic/vgic-mmio-v3.c b/arch/arm64/kvm/vgic/vgic-mmio-v3.c index 15a6c98ee92f..7a6360eba321 100644 --- a/arch/arm64/kvm/vgic/vgic-mmio-v3.c +++ b/arch/arm64/kvm/vgic/vgic-mmio-v3.c @@ -356,19 +356,26 @@ static int vgic_v3_uaccess_write_pending(struct kvm_vcpu *vcpu, struct vgic_irq *irq = vgic_get_irq(vcpu->kvm, vcpu, intid + i); raw_spin_lock_irqsave(&irq->irq_lock, flags); - if (test_bit(i, &val)) { - /* - * pending_latch is set irrespective of irq type - * (level or edge) to avoid dependency that VM should - * restore irq config before pending info. - */ - irq->pending_latch = true; - vgic_queue_irq_unlock(vcpu->kvm, irq, flags); - } else { + + /* + * pending_latch is set irrespective of irq type + * (level or edge) to avoid dependency that VM should + * restore irq config before pending info. + */ + irq->pending_latch = test_bit(i, &val); + + if (irq->hw && vgic_irq_is_sgi(irq->intid)) { + irq_set_irqchip_state(irq->host_irq, + IRQCHIP_STATE_PENDING, + irq->pending_latch); irq->pending_latch = false; - raw_spin_unlock_irqrestore(&irq->irq_lock, flags); } + if (irq->pending_latch) + vgic_queue_irq_unlock(vcpu->kvm, irq, flags); + else + raw_spin_unlock_irqrestore(&irq->irq_lock, flags); + vgic_put_irq(vcpu->kvm, irq); } From ba7be666740847d967822bed15500656b26bc703 Mon Sep 17 00:00:00 2001 From: Oliver Upton Date: Thu, 4 Jan 2024 18:32:32 +0000 Subject: [PATCH 233/288] KVM: arm64: vgic-its: Avoid potential UAF in LPI translation cache commit ad362fe07fecf0aba839ff2cc59a3617bd42c33f upstream. There is a potential UAF scenario in the case of an LPI translation cache hit racing with an operation that invalidates the cache, such as a DISCARD ITS command. The root of the problem is that vgic_its_check_cache() does not elevate the refcount on the vgic_irq before dropping the lock that serializes refcount changes. Have vgic_its_check_cache() raise the refcount on the returned vgic_irq and add the corresponding decrement after queueing the interrupt. Cc: stable@vger.kernel.org Signed-off-by: Oliver Upton Signed-off-by: Marc Zyngier Link: https://lore.kernel.org/r/20240104183233.3560639-1-oliver.upton@linux.dev Signed-off-by: Greg Kroah-Hartman --- arch/arm64/kvm/vgic/vgic-its.c | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/kvm/vgic/vgic-its.c b/arch/arm64/kvm/vgic/vgic-its.c index 23710bf5a86b..62f261b8eb62 100644 --- a/arch/arm64/kvm/vgic/vgic-its.c +++ b/arch/arm64/kvm/vgic/vgic-its.c @@ -584,7 +584,11 @@ static struct vgic_irq *vgic_its_check_cache(struct kvm *kvm, phys_addr_t db, unsigned long flags; raw_spin_lock_irqsave(&dist->lpi_list_lock, flags); + irq = __vgic_its_check_cache(dist, db, devid, eventid); + if (irq) + vgic_get_irq_kref(irq); + raw_spin_unlock_irqrestore(&dist->lpi_list_lock, flags); return irq; @@ -763,6 +767,7 @@ int vgic_its_inject_cached_translation(struct kvm *kvm, struct kvm_msi *msi) raw_spin_lock_irqsave(&irq->irq_lock, flags); irq->pending_latch = true; vgic_queue_irq_unlock(kvm, irq, flags); + vgic_put_irq(kvm, irq); return 0; } From c7883c9f83e674673dcb8f5c6650004145ad090c Mon Sep 17 00:00:00 2001 From: Marcelo Schmitt Date: Sat, 16 Dec 2023 14:46:11 -0300 Subject: [PATCH 234/288] iio: adc: ad7091r: Pass iio_dev to event handler commit a25a7df518fc71b1ba981d691e9322e645d2689c upstream. Previous version of ad7091r event handler received the ADC state pointer and retrieved the iio device from driver data field with dev_get_drvdata(). However, no driver data have ever been set, which led to null pointer dereference when running the event handler. Pass the iio device to the event handler and retrieve the ADC state struct from it so we avoid the null pointer dereference and save the driver from filling the driver data field. Fixes: ca69300173b6 ("iio: adc: Add support for AD7091R5 ADC") Signed-off-by: Marcelo Schmitt Link: https://lore.kernel.org/r/5024b764107463de9578d5b3b0a3d5678e307b1a.1702746240.git.marcelo.schmitt1@gmail.com Cc: Signed-off-by: Jonathan Cameron Signed-off-by: Greg Kroah-Hartman --- drivers/iio/adc/ad7091r-base.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/drivers/iio/adc/ad7091r-base.c b/drivers/iio/adc/ad7091r-base.c index 63b4d6ea4566..811f04448d8d 100644 --- a/drivers/iio/adc/ad7091r-base.c +++ b/drivers/iio/adc/ad7091r-base.c @@ -174,8 +174,8 @@ static const struct iio_info ad7091r_info = { static irqreturn_t ad7091r_event_handler(int irq, void *private) { - struct ad7091r_state *st = (struct ad7091r_state *) private; - struct iio_dev *iio_dev = dev_get_drvdata(st->dev); + struct iio_dev *iio_dev = private; + struct ad7091r_state *st = iio_priv(iio_dev); unsigned int i, read_val; int ret; s64 timestamp = iio_get_time_ns(iio_dev); @@ -234,7 +234,7 @@ int ad7091r_probe(struct device *dev, const char *name, if (irq) { ret = devm_request_threaded_irq(dev, irq, NULL, ad7091r_event_handler, - IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, st); + IRQF_TRIGGER_FALLING | IRQF_ONESHOT, name, iio_dev); if (ret) return ret; } From c964a0597b50806c568ad4f04205cccd4bbac8b9 Mon Sep 17 00:00:00 2001 From: Jason Gerecke Date: Tue, 19 Dec 2023 13:33:43 -0800 Subject: [PATCH 235/288] HID: wacom: Correct behavior when processing some confidence == false touches commit 502296030ec6b0329e00f9fb15018e170cc63037 upstream. There appear to be a few different ways that Wacom devices can deal with confidence: 1. If the device looses confidence in a touch, it will first clear the tipswitch flag in one report, and then clear the confidence flag in a second report. This behavior is used by e.g. DTH-2452. 2. If the device looses confidence in a touch, it will clear both the tipswitch and confidence flags within the same report. This behavior is used by some AES devices. 3. If the device looses confidence in a touch, it will clear *only* the confidence bit. The tipswitch bit will remain set so long as the touch is tracked. This behavior may be used in future devices. The driver does not currently handle situation 3 properly. Touches that loose confidence will remain "in prox" and essentially frozen in place until the tipswitch bit is finally cleared. Not only does this result in userspace seeing a stuck touch, but it also prevents pen arbitration from working properly (the pen won't send events until all touches are up, but we don't currently process events from non-confident touches). This commit centralizes the checking of the confidence bit in the wacom_wac_finger_slot() function and has 'prox' depend on it. In the case where situation 3 is encountered, the treat the touch as though it was removed, allowing both userspace and the pen arbitration to act normally. Signed-off-by: Tatsunosuke Tobita Signed-off-by: Ping Cheng Signed-off-by: Jason Gerecke Fixes: 7fb0413baa7f ("HID: wacom: Use "Confidence" flag to prevent reporting invalid contacts") Cc: stable@vger.kernel.org Signed-off-by: Jiri Kosina Signed-off-by: Greg Kroah-Hartman --- drivers/hid/wacom_wac.c | 32 ++++---------------------------- 1 file changed, 4 insertions(+), 28 deletions(-) diff --git a/drivers/hid/wacom_wac.c b/drivers/hid/wacom_wac.c index 1b5e5e9f577d..726a5d76615d 100644 --- a/drivers/hid/wacom_wac.c +++ b/drivers/hid/wacom_wac.c @@ -2612,8 +2612,8 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac, { struct hid_data *hid_data = &wacom_wac->hid_data; bool mt = wacom_wac->features.touch_max > 1; - bool prox = hid_data->tipswitch && - report_touch_events(wacom_wac); + bool touch_down = hid_data->tipswitch && hid_data->confidence; + bool prox = touch_down && report_touch_events(wacom_wac); if (wacom_wac->shared->has_mute_touch_switch && !wacom_wac->shared->is_touch_on) { @@ -2652,24 +2652,6 @@ static void wacom_wac_finger_slot(struct wacom_wac *wacom_wac, } } -static bool wacom_wac_slot_is_active(struct input_dev *dev, int key) -{ - struct input_mt *mt = dev->mt; - struct input_mt_slot *s; - - if (!mt) - return false; - - for (s = mt->slots; s != mt->slots + mt->num_slots; s++) { - if (s->key == key && - input_mt_get_value(s, ABS_MT_TRACKING_ID) >= 0) { - return true; - } - } - - return false; -} - static void wacom_wac_finger_event(struct hid_device *hdev, struct hid_field *field, struct hid_usage *usage, __s32 value) { @@ -2717,14 +2699,8 @@ static void wacom_wac_finger_event(struct hid_device *hdev, } if (usage->usage_index + 1 == field->report_count) { - if (equivalent_usage == wacom_wac->hid_data.last_slot_field) { - bool touch_removed = wacom_wac_slot_is_active(wacom_wac->touch_input, - wacom_wac->hid_data.id) && !wacom_wac->hid_data.tipswitch; - - if (wacom_wac->hid_data.confidence || touch_removed) { - wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input); - } - } + if (equivalent_usage == wacom_wac->hid_data.last_slot_field) + wacom_wac_finger_slot(wacom_wac, wacom_wac->touch_input); } } From 927626a2073887ee30ba00633260d4d203f8e875 Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Mon, 4 Dec 2023 17:24:43 +0800 Subject: [PATCH 236/288] mfd: syscon: Fix null pointer dereference in of_syscon_register() [ Upstream commit 41673c66b3d0c09915698fec5c13b24336f18dd1 ] kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fixes: e15d7f2b81d2 ("mfd: syscon: Use a unique name with regmap_config") Signed-off-by: Kunwu Chan Reviewed-by: Arnd Bergmann Link: https://lore.kernel.org/r/20231204092443.2462115-1-chentao@kylinos.cn Signed-off-by: Lee Jones Signed-off-by: Sasha Levin --- drivers/mfd/syscon.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/mfd/syscon.c b/drivers/mfd/syscon.c index df5cebb372a5..60f74144a4f8 100644 --- a/drivers/mfd/syscon.c +++ b/drivers/mfd/syscon.c @@ -103,6 +103,10 @@ static struct syscon *of_syscon_register(struct device_node *np, bool check_clk) syscon_config.name = kasprintf(GFP_KERNEL, "%pOFn@%llx", np, (u64)res.start); + if (!syscon_config.name) { + ret = -ENOMEM; + goto err_regmap; + } syscon_config.reg_stride = reg_io_width; syscon_config.val_bits = reg_io_width * 8; syscon_config.max_register = resource_size(&res) - reg_io_width; From b1528687739bfa277fb28e8fc43a902399813308 Mon Sep 17 00:00:00 2001 From: Dang Huynh Date: Fri, 3 Nov 2023 18:42:03 +0700 Subject: [PATCH 237/288] leds: aw2013: Select missing dependency REGMAP_I2C [ Upstream commit 75469bb0537ad2ab0fc1fb6e534a79cfc03f3b3f ] The AW2013 driver uses devm_regmap_init_i2c, so REGMAP_I2C needs to be selected. Otherwise build process may fail with: ld: drivers/leds/leds-aw2013.o: in function `aw2013_probe': leds-aw2013.c:345: undefined reference to `__devm_regmap_init_i2c' Signed-off-by: Dang Huynh Acked-by: Nikita Travkin Fixes: 59ea3c9faf32 ("leds: add aw2013 driver") Link: https://lore.kernel.org/r/20231103114203.1108922-1-danct12@riseup.net Signed-off-by: Lee Jones Signed-off-by: Sasha Levin --- drivers/leds/Kconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/leds/Kconfig b/drivers/leds/Kconfig index ad84be4f6817..03c4c5e4d35c 100644 --- a/drivers/leds/Kconfig +++ b/drivers/leds/Kconfig @@ -116,6 +116,7 @@ config LEDS_AS3645A config LEDS_AW2013 tristate "LED support for Awinic AW2013" depends on LEDS_CLASS && I2C && OF + select REGMAP_I2C help This option enables support for the AW2013 3-channel LED driver. From 5cdda6239ce61758dd7c4350ebf91b882937e2dc Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Sat, 2 Dec 2023 14:14:18 +0300 Subject: [PATCH 238/288] mips: dmi: Fix early remap on MIPS32 [ Upstream commit 0d0a3748a2cb38f9da1f08d357688ebd982eb788 ] dmi_early_remap() has been defined as ioremap_cache() which on MIPS32 gets to be converted to the VM-based mapping. DMI early remapping is performed at the setup_arch() stage with no VM available. So calling the dmi_early_remap() for MIPS32 causes the system to crash at the early boot time. Fix that by converting dmi_early_remap() to the uncached remapping which is always available on both 32 and 64-bits MIPS systems. Note this change shall not cause any regressions on the current DMI support implementation because on the early boot-up stage neither MIPS32 nor MIPS64 has the cacheable ioremapping support anyway. Fixes: be8fa1cb444c ("MIPS: Add support for Desktop Management Interface (DMI)") Signed-off-by: Serge Semin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/include/asm/dmi.h | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/include/asm/dmi.h b/arch/mips/include/asm/dmi.h index 27415a288adf..dc397f630c66 100644 --- a/arch/mips/include/asm/dmi.h +++ b/arch/mips/include/asm/dmi.h @@ -5,7 +5,7 @@ #include #include -#define dmi_early_remap(x, l) ioremap_cache(x, l) +#define dmi_early_remap(x, l) ioremap(x, l) #define dmi_early_unmap(x, l) iounmap(x) #define dmi_remap(x, l) ioremap_cache(x, l) #define dmi_unmap(x) iounmap(x) From 9995dee8b952d3265d291bc6ba0a67d3bf88b1af Mon Sep 17 00:00:00 2001 From: Serge Semin Date: Sat, 2 Dec 2023 14:14:19 +0300 Subject: [PATCH 239/288] mips: Fix incorrect max_low_pfn adjustment [ Upstream commit 0f5cc249ff73552d3bd864e62f85841dafaa107d ] max_low_pfn variable is incorrectly adjusted if the kernel is built with high memory support and the later is detected in a running system, so the memory which actually can be directly mapped is getting into the highmem zone. See the ZONE_NORMAL range on my MIPS32r5 system: > Zone ranges: > DMA [mem 0x0000000000000000-0x0000000000ffffff] > Normal [mem 0x0000000001000000-0x0000000007ffffff] > HighMem [mem 0x0000000008000000-0x000000020fffffff] while the zones are supposed to look as follows: > Zone ranges: > DMA [mem 0x0000000000000000-0x0000000000ffffff] > Normal [mem 0x0000000001000000-0x000000001fffffff] > HighMem [mem 0x0000000020000000-0x000000020fffffff] Even though the physical memory within the range [0x08000000;0x20000000] belongs to MMIO on our system, we don't really want it to be considered as high memory since on MIPS32 that range still can be directly mapped. Note there might be other problems caused by the max_low_pfn variable misconfiguration. For instance high_memory variable is initialize with virtual address corresponding to the max_low_pfn PFN, and by design it must define the upper bound on direct map memory, then end of the normal zone. That in its turn potentially may cause problems in accessing the memory by means of the /dev/mem and /dev/kmem devices. Let's fix the discovered misconfiguration then. It turns out the commit a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") didn't introduce the max_low_pfn adjustment quite correct. If the kernel is built with high memory support and the system is equipped with high memory, the max_low_pfn variable will need to be initialized with PFN of the most upper directly reachable memory address so the zone normal would be correctly setup. On MIPS that PFN corresponds to PFN_DOWN(HIGHMEM_START). If the system is built with no high memory support and one is detected in the running system, we'll just need to adjust the max_pfn variable to discard the found high memory from the system and leave the max_low_pfn as is, since the later will be less than PFN_DOWN(HIGHMEM_START) anyway by design of the for_each_memblock() loop performed a bit early in the bootmem_init() method. Fixes: a94e4f24ec83 ("MIPS: init: Drop boot_mem_map") Signed-off-by: Serge Semin Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/kernel/setup.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index b7eb7dd96e17..66643cb65963 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -322,11 +322,11 @@ static void __init bootmem_init(void) panic("Incorrect memory mapping !!!"); if (max_pfn > PFN_DOWN(HIGHMEM_START)) { + max_low_pfn = PFN_DOWN(HIGHMEM_START); #ifdef CONFIG_HIGHMEM - highstart_pfn = PFN_DOWN(HIGHMEM_START); + highstart_pfn = max_low_pfn; highend_pfn = max_pfn; #else - max_low_pfn = PFN_DOWN(HIGHMEM_START); max_pfn = max_low_pfn; #endif } From c3ed63f6a1c25f8f2e68e7b39bff94c51dc13025 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 10 Jan 2024 19:07:36 +0100 Subject: [PATCH 240/288] MIPS: Alchemy: Fix an out-of-bound access in db1200_dev_setup() [ Upstream commit 89c4b588d11e9acf01d604de4b0c715884f59213 ] When calling spi_register_board_info(), we should pass the number of elements in 'db1200_spi_devs', not 'db1200_i2c_devs'. Fixes: 63323ec54a7e ("MIPS: Alchemy: Extended DB1200 board support.") Signed-off-by: Christophe JAILLET Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/alchemy/devboards/db1200.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/alchemy/devboards/db1200.c b/arch/mips/alchemy/devboards/db1200.c index 414f92eacb5e..9ad26215b004 100644 --- a/arch/mips/alchemy/devboards/db1200.c +++ b/arch/mips/alchemy/devboards/db1200.c @@ -847,7 +847,7 @@ int __init db1200_dev_setup(void) i2c_register_board_info(0, db1200_i2c_devs, ARRAY_SIZE(db1200_i2c_devs)); spi_register_board_info(db1200_spi_devs, - ARRAY_SIZE(db1200_i2c_devs)); + ARRAY_SIZE(db1200_spi_devs)); /* SWITCHES: S6.8 I2C/SPI selector (OFF=I2C ON=SPI) * S6.7 AC97/I2S selector (OFF=AC97 ON=I2S) From 5e3995ec39c4149b3927755cc6dea83dac0c104b Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Wed, 10 Jan 2024 19:09:46 +0100 Subject: [PATCH 241/288] MIPS: Alchemy: Fix an out-of-bound access in db1550_dev_setup() [ Upstream commit 3c1e5abcda64bed0c7bffa65af2316995f269a61 ] When calling spi_register_board_info(), Fixes: f869d42e580f ("MIPS: Alchemy: Improved DB1550 support, with audio and serial busses.") Signed-off-by: Christophe JAILLET Signed-off-by: Thomas Bogendoerfer Signed-off-by: Sasha Levin --- arch/mips/alchemy/devboards/db1550.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/mips/alchemy/devboards/db1550.c b/arch/mips/alchemy/devboards/db1550.c index 752b93d91ac9..06811a5db71d 100644 --- a/arch/mips/alchemy/devboards/db1550.c +++ b/arch/mips/alchemy/devboards/db1550.c @@ -588,7 +588,7 @@ int __init db1550_dev_setup(void) i2c_register_board_info(0, db1550_i2c_devs, ARRAY_SIZE(db1550_i2c_devs)); spi_register_board_info(db1550_spi_devs, - ARRAY_SIZE(db1550_i2c_devs)); + ARRAY_SIZE(db1550_spi_devs)); c = clk_get(NULL, "psc0_intclk"); if (!IS_ERR(c)) { From 89b97e6b19a8f488a8369781b096fc85ce8228f3 Mon Sep 17 00:00:00 2001 From: Jan Palus Date: Sat, 11 Nov 2023 23:17:04 +0100 Subject: [PATCH 242/288] power: supply: cw2015: correct time_to_empty units in sysfs [ Upstream commit f37669119423ca852ca855b24732f25c0737aa57 ] RRT_ALRT register holds remaining battery time in minutes therefore it needs to be scaled accordingly when exposing TIME_TO_EMPTY via sysfs expressed in seconds Fixes: b4c7715c10c1 ("power: supply: add CellWise cw2015 fuel gauge driver") Signed-off-by: Jan Palus Link: https://lore.kernel.org/r/20231111221704.5579-1-jpalus@fastmail.com Signed-off-by: Sebastian Reichel Signed-off-by: Sasha Levin --- drivers/power/supply/cw2015_battery.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/power/supply/cw2015_battery.c b/drivers/power/supply/cw2015_battery.c index de1fa71be1e8..d1071dbb904e 100644 --- a/drivers/power/supply/cw2015_battery.c +++ b/drivers/power/supply/cw2015_battery.c @@ -490,7 +490,7 @@ static int cw_battery_get_property(struct power_supply *psy, case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW: if (cw_battery_valid_time_to_empty(cw_bat)) - val->intval = cw_bat->time_to_empty; + val->intval = cw_bat->time_to_empty * 60; else val->intval = 0; break; From bc57f3ef8a9eb0180606696f586a6dcfaa175ed0 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Fri, 10 Nov 2023 16:29:29 +0100 Subject: [PATCH 243/288] serial: 8250: omap: Don't skip resource freeing if pm_runtime_resume_and_get() failed MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit ad90d0358bd3b4554f243a425168fc7cebe7d04e ] Returning an error code from .remove() makes the driver core emit the little helpful error message: remove callback returned a non-zero value. This will be ignored. and then remove the device anyhow. So all resources that were not freed are leaked in this case. Skipping serial8250_unregister_port() has the potential to keep enough of the UART around to trigger a use-after-free. So replace the error return (and with it the little helpful error message) by a more useful error message and continue to cleanup. Fixes: e3f0c638f428 ("serial: 8250: omap: Fix unpaired pm_runtime_put_sync() in omap8250_remove()") Signed-off-by: Uwe Kleine-König Reviewed-by: Tony Lindgren Link: https://lore.kernel.org/r/20231110152927.70601-2-u.kleine-koenig@pengutronix.de Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/8250/8250_omap.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/8250/8250_omap.c b/drivers/tty/serial/8250/8250_omap.c index bd4118f1b694..25765ebb756a 100644 --- a/drivers/tty/serial/8250/8250_omap.c +++ b/drivers/tty/serial/8250/8250_omap.c @@ -1497,7 +1497,7 @@ static int omap8250_remove(struct platform_device *pdev) err = pm_runtime_resume_and_get(&pdev->dev); if (err) - return err; + dev_err(&pdev->dev, "Failed to resume hardware\n"); serial8250_unregister_port(priv->line); priv->line = -ENODEV; From 7166e8e9135ec859dc5b64aa66da7600eea18382 Mon Sep 17 00:00:00 2001 From: Arnaldo Carvalho de Melo Date: Thu, 30 Nov 2023 14:11:45 -0300 Subject: [PATCH 244/288] libapi: Add missing linux/types.h header to get the __u64 type on io.h [ Upstream commit af76b2dec0984a079d8497bfa37d29a9b55932e1 ] There are functions using __u64, so we need to have the linux/types.h header otherwise we'll break when its not included before api/io.h. Fixes: e95770af4c4a280f ("tools api: Add a lightweight buffered reading api") Reviewed-by: Ian Rogers Cc: Adrian Hunter Cc: Jiri Olsa Cc: Namhyung Kim Link: https://lore.kernel.org/lkml/ZWjDPL+IzPPsuC3X@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/lib/api/io.h | 1 + 1 file changed, 1 insertion(+) diff --git a/tools/lib/api/io.h b/tools/lib/api/io.h index 777c20f6b604..458acd294237 100644 --- a/tools/lib/api/io.h +++ b/tools/lib/api/io.h @@ -9,6 +9,7 @@ #include #include +#include struct io { /* File descriptor being read/ */ From 381bea33a86e74c26551fd822c8b86236304ea50 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Thu, 9 Nov 2023 12:10:08 +0200 Subject: [PATCH 245/288] acpi: property: Let args be NULL in __acpi_node_get_property_reference [ Upstream commit bef52aa0f3de1b7d8c258c13b16e577361dabf3a ] fwnode_get_property_reference_args() may not be called with args argument NULL on ACPI, OF already supports this. Add the missing NULL checks and document this. The purpose is to be able to count the references. Fixes: 977d5ad39f3e ("ACPI: Convert ACPI reference args to generic fwnode reference args") Signed-off-by: Sakari Ailus Reviewed-by: Andy Shevchenko Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20231109101010.1329587-2-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/acpi/property.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/drivers/acpi/property.c b/drivers/acpi/property.c index 80e92c298055..cf872dc5b07a 100644 --- a/drivers/acpi/property.c +++ b/drivers/acpi/property.c @@ -639,6 +639,7 @@ acpi_fwnode_get_named_child_node(const struct fwnode_handle *fwnode, * @index: Index of the reference to return * @num_args: Maximum number of arguments after each reference * @args: Location to store the returned reference with optional arguments + * (may be NULL) * * Find property with @name, verifify that it is a package containing at least * one object reference and if so, store the ACPI device object pointer to the @@ -697,6 +698,9 @@ int __acpi_node_get_property_reference(const struct fwnode_handle *fwnode, if (ret) return ret == -ENODEV ? -EINVAL : ret; + if (!args) + return 0; + args->fwnode = acpi_fwnode_handle(device); args->nargs = 0; return 0; From 6746f3e8939dd3cd8ebe928e3f913e9cdfcaffd5 Mon Sep 17 00:00:00 2001 From: Sakari Ailus Date: Thu, 9 Nov 2023 12:10:09 +0200 Subject: [PATCH 246/288] software node: Let args be NULL in software_node_get_reference_args [ Upstream commit 1eaea4b3604eb9ca7d9a1e73d88fc121bb4061f5 ] fwnode_get_property_reference_args() may not be called with args argument NULL and while OF already supports this. Add the missing NULL check. The purpose is to be able to count the references. Fixes: b06184acf751 ("software node: Add software_node_get_reference_args()") Signed-off-by: Sakari Ailus Reviewed-by: Andy Shevchenko Reviewed-by: Heikki Krogerus Link: https://lore.kernel.org/r/20231109101010.1329587-3-sakari.ailus@linux.intel.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/base/swnode.c | 3 +++ 1 file changed, 3 insertions(+) diff --git a/drivers/base/swnode.c b/drivers/base/swnode.c index d2fb3eb5816c..b664c36388e2 100644 --- a/drivers/base/swnode.c +++ b/drivers/base/swnode.c @@ -531,6 +531,9 @@ software_node_get_reference_args(const struct fwnode_handle *fwnode, if (nargs > NR_FWNODE_REFERENCE_ARGS) return -EINVAL; + if (!args) + return 0; + args->fwnode = software_node_get(refnode); args->nargs = nargs; From 6e04a9d30509fb53ba6df5d655ed61d607a7cfda Mon Sep 17 00:00:00 2001 From: Paul Geurts Date: Fri, 24 Nov 2023 14:11:10 +0100 Subject: [PATCH 247/288] serial: imx: fix tx statemachine deadlock [ Upstream commit 78d60dae9a0c9f09aa3d6477c94047df2fe6f7b0 ] When using the serial port as RS485 port, the tx statemachine is used to control the RTS pin to drive the RS485 transceiver TX_EN pin. When the TTY port is closed in the middle of a transmission (for instance during userland application crash), imx_uart_shutdown disables the interface and disables the Transmission Complete interrupt. afer that, imx_uart_stop_tx bails on an incomplete transmission, to be retriggered by the TC interrupt. This interrupt is disabled and therefore the tx statemachine never transitions out of SEND. The statemachine is in deadlock now, and the TX_EN remains low, making the interface useless. imx_uart_stop_tx now checks for incomplete transmission AND whether TC interrupts are enabled before bailing to be retriggered. This makes sure the state machine handling is reached, and is properly set to WAIT_AFTER_SEND. Fixes: cb1a60923609 ("serial: imx: implement rts delaying for rs485") Signed-off-by: Paul Geurts Tested-by: Rasmus Villemoes Tested-by: Eberhard Stoll Link: https://lore.kernel.org/r/AM0PR09MB26758F651BC1B742EB45775995B8A@AM0PR09MB2675.eurprd09.prod.outlook.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/imx.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index f236e4738b78..8bb7d5b5de9d 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -461,13 +461,13 @@ static void imx_uart_stop_tx(struct uart_port *port) ucr1 = imx_uart_readl(sport, UCR1); imx_uart_writel(sport, ucr1 & ~UCR1_TRDYEN, UCR1); + ucr4 = imx_uart_readl(sport, UCR4); usr2 = imx_uart_readl(sport, USR2); - if (!(usr2 & USR2_TXDC)) { + if ((!(usr2 & USR2_TXDC)) && (ucr4 & UCR4_TCEN)) { /* The shifter is still busy, so retry once TC triggers */ return; } - ucr4 = imx_uart_readl(sport, UCR4); ucr4 &= ~UCR4_TCEN; imx_uart_writel(sport, ucr4, UCR4); From 8083d6840179055acbb54869a56e221ff26848b6 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Uwe=20Kleine-K=C3=B6nig?= Date: Mon, 8 Aug 2022 22:47:30 +0200 Subject: [PATCH 248/288] iio: adc: ad9467: Benefit from devm_clk_get_enabled() to simplify MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit cdd07b3ab94a020570132558442a26e74b70bc42 ] Make use of devm_clk_get_enabled() to replace some code that effectively open codes this new function. Reviewed-by: Andy Shevchenko Signed-off-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20220808204740.307667-3-u.kleine-koenig@pengutronix.de Signed-off-by: Jonathan Cameron Stable-dep-of: 76f028539cf3 ("iio: adc: ad9467: fix reset gpio handling") Signed-off-by: Sasha Levin --- drivers/iio/adc/ad9467.c | 17 +---------------- 1 file changed, 1 insertion(+), 16 deletions(-) diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index 19a45dd43796..92837dcbc170 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -378,13 +378,6 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) return ad9467_outputmode_set(st->spi, st->output_mode); } -static void ad9467_clk_disable(void *data) -{ - struct ad9467_state *st = data; - - clk_disable_unprepare(st->clk); -} - static int ad9467_probe(struct spi_device *spi) { const struct ad9467_chip_info *info; @@ -404,18 +397,10 @@ static int ad9467_probe(struct spi_device *spi) st = adi_axi_adc_conv_priv(conv); st->spi = spi; - st->clk = devm_clk_get(&spi->dev, "adc-clk"); + st->clk = devm_clk_get_enabled(&spi->dev, "adc-clk"); if (IS_ERR(st->clk)) return PTR_ERR(st->clk); - ret = clk_prepare_enable(st->clk); - if (ret < 0) - return ret; - - ret = devm_add_action_or_reset(&spi->dev, ad9467_clk_disable, st); - if (ret) - return ret; - st->pwrdown_gpio = devm_gpiod_get_optional(&spi->dev, "powerdown", GPIOD_OUT_LOW); if (IS_ERR(st->pwrdown_gpio)) From 00e916d9985f4324541e9f39f8d40965e18b9f3e Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Thu, 7 Dec 2023 13:39:24 +0100 Subject: [PATCH 249/288] iio: adc: ad9467: fix reset gpio handling [ Upstream commit 76f028539cf360f750efd8cde560edda298e4c6b ] The reset gpio was being handled with inverted polarity. This means that as far as gpiolib is concerned we were actually leaving the pin asserted (in theory, this would mean reset). However, inverting the polarity in devicetree made things work. Fix it by doing it the proper way and how gpiolib expects it to be done. While at it, moved the handling to it's own function and dropped 'reset_gpio' from the 'struct ad9467_state' as we only need it during probe. On top of that, refactored things so that we now request the gpio asserted (i.e in reset) and then de-assert it. Also note that we now use gpiod_set_value_cansleep() instead of gpiod_direction_output() as we already request the pin as output. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Reviewed-by: David Lechner Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-1-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin --- drivers/iio/adc/ad9467.c | 31 ++++++++++++++++++------------- 1 file changed, 18 insertions(+), 13 deletions(-) diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index 92837dcbc170..f2620dcd2a2c 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -121,7 +121,6 @@ struct ad9467_state { unsigned int output_mode; struct gpio_desc *pwrdown_gpio; - struct gpio_desc *reset_gpio; }; static int ad9467_spi_read(struct spi_device *spi, unsigned int reg) @@ -378,6 +377,21 @@ static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) return ad9467_outputmode_set(st->spi, st->output_mode); } +static int ad9467_reset(struct device *dev) +{ + struct gpio_desc *gpio; + + gpio = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_HIGH); + if (IS_ERR_OR_NULL(gpio)) + return PTR_ERR_OR_ZERO(gpio); + + fsleep(1); + gpiod_set_value_cansleep(gpio, 0); + fsleep(10 * USEC_PER_MSEC); + + return 0; +} + static int ad9467_probe(struct spi_device *spi) { const struct ad9467_chip_info *info; @@ -406,18 +420,9 @@ static int ad9467_probe(struct spi_device *spi) if (IS_ERR(st->pwrdown_gpio)) return PTR_ERR(st->pwrdown_gpio); - st->reset_gpio = devm_gpiod_get_optional(&spi->dev, "reset", - GPIOD_OUT_LOW); - if (IS_ERR(st->reset_gpio)) - return PTR_ERR(st->reset_gpio); - - if (st->reset_gpio) { - udelay(1); - ret = gpiod_direction_output(st->reset_gpio, 1); - if (ret) - return ret; - mdelay(10); - } + ret = ad9467_reset(&spi->dev); + if (ret) + return ret; spi_set_drvdata(spi, st); From a3167e5ab5b8dc38a97b863960bc1f3482029585 Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Thu, 7 Dec 2023 13:39:25 +0100 Subject: [PATCH 250/288] iio: adc: ad9467: don't ignore error codes [ Upstream commit e072e149cfb827e0ab4cafb0547e9658e35393cd ] Make sure functions that return errors are not ignored. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Reviewed-by: David Lechner Signed-off-by: Nuno Sa Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-2-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin --- drivers/iio/adc/ad9467.c | 27 +++++++++++++++++---------- 1 file changed, 17 insertions(+), 10 deletions(-) diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index f2620dcd2a2c..df23bceb6bb4 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -162,9 +162,10 @@ static int ad9467_reg_access(struct adi_axi_adc_conv *conv, unsigned int reg, if (readval == NULL) { ret = ad9467_spi_write(spi, reg, writeval); - ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER, - AN877_ADC_TRANSFER_SYNC); - return ret; + if (ret) + return ret; + return ad9467_spi_write(spi, AN877_ADC_REG_TRANSFER, + AN877_ADC_TRANSFER_SYNC); } ret = ad9467_spi_read(spi, reg); @@ -272,10 +273,13 @@ static int ad9467_get_scale(struct adi_axi_adc_conv *conv, int *val, int *val2) const struct ad9467_chip_info *info1 = to_ad9467_chip_info(info); struct ad9467_state *st = adi_axi_adc_conv_priv(conv); unsigned int i, vref_val; + int ret; - vref_val = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF); + ret = ad9467_spi_read(st->spi, AN877_ADC_REG_VREF); + if (ret < 0) + return ret; - vref_val &= info1->vref_mask; + vref_val = ret & info1->vref_mask; for (i = 0; i < info->num_scales; i++) { if (vref_val == info->scale_table[i][1]) @@ -296,6 +300,7 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) struct ad9467_state *st = adi_axi_adc_conv_priv(conv); unsigned int scale_val[2]; unsigned int i; + int ret; if (val != 0) return -EINVAL; @@ -305,11 +310,13 @@ static int ad9467_set_scale(struct adi_axi_adc_conv *conv, int val, int val2) if (scale_val[0] != val || scale_val[1] != val2) continue; - ad9467_spi_write(st->spi, AN877_ADC_REG_VREF, - info->scale_table[i][1]); - ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER, - AN877_ADC_TRANSFER_SYNC); - return 0; + ret = ad9467_spi_write(st->spi, AN877_ADC_REG_VREF, + info->scale_table[i][1]); + if (ret < 0) + return ret; + + return ad9467_spi_write(st->spi, AN877_ADC_REG_TRANSFER, + AN877_ADC_TRANSFER_SYNC); } return -EINVAL; From 1e17feb4ada9d97bd69a957f36c064a7e76ff083 Mon Sep 17 00:00:00 2001 From: Nuno Sa Date: Thu, 7 Dec 2023 13:39:27 +0100 Subject: [PATCH 251/288] iio: adc: ad9467: fix scale setting [ Upstream commit b73f08bb7fe5a0901646ca5ceaa1e7a2d5ee6293 ] When reading in_voltage_scale we can get something like: root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale 0.038146 However, when reading the available options: root@analog:/sys/bus/iio/devices/iio:device2# cat in_voltage_scale_available 2000.000000 2100.000006 2200.000007 2300.000008 2400.000009 2500.000010 which does not make sense. Moreover, when trying to set a new scale we get an error because there's no call to __ad9467_get_scale() to give us values as given when reading in_voltage_scale. Fix it by computing the available scales during probe and properly pass the list when .read_available() is called. While at it, change to use .read_available() from iio_info. Also note that to properly fix this, adi-axi-adc.c has to be changed accordingly. Fixes: ad6797120238 ("iio: adc: ad9467: add support AD9467 ADC") Signed-off-by: Nuno Sa Reviewed-by: David Lechner Link: https://lore.kernel.org/r/20231207-iio-backend-prep-v2-4-a4a33bc4d70e@analog.com Signed-off-by: Jonathan Cameron Signed-off-by: Sasha Levin --- drivers/iio/adc/ad9467.c | 47 ++++++++++++++++++ drivers/iio/adc/adi-axi-adc.c | 74 ++++++----------------------- include/linux/iio/adc/adi-axi-adc.h | 4 ++ 3 files changed, 66 insertions(+), 59 deletions(-) diff --git a/drivers/iio/adc/ad9467.c b/drivers/iio/adc/ad9467.c index df23bceb6bb4..6b9627bfebb0 100644 --- a/drivers/iio/adc/ad9467.c +++ b/drivers/iio/adc/ad9467.c @@ -119,6 +119,7 @@ struct ad9467_state { struct spi_device *spi; struct clk *clk; unsigned int output_mode; + unsigned int (*scales)[2]; struct gpio_desc *pwrdown_gpio; }; @@ -212,6 +213,7 @@ static void __ad9467_get_scale(struct adi_axi_adc_conv *conv, int index, .channel = _chan, \ .info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE) | \ BIT(IIO_CHAN_INFO_SAMP_FREQ), \ + .info_mask_shared_by_type_available = BIT(IIO_CHAN_INFO_SCALE), \ .scan_index = _si, \ .scan_type = { \ .sign = _sign, \ @@ -365,6 +367,26 @@ static int ad9467_write_raw(struct adi_axi_adc_conv *conv, } } +static int ad9467_read_avail(struct adi_axi_adc_conv *conv, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + const struct adi_axi_adc_chip_info *info = conv->chip_info; + struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + + switch (mask) { + case IIO_CHAN_INFO_SCALE: + *vals = (const int *)st->scales; + *type = IIO_VAL_INT_PLUS_MICRO; + /* Values are stored in a 2D matrix */ + *length = info->num_scales * 2; + return IIO_AVAIL_LIST; + default: + return -EINVAL; + } +} + static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode) { int ret; @@ -377,6 +399,26 @@ static int ad9467_outputmode_set(struct spi_device *spi, unsigned int mode) AN877_ADC_TRANSFER_SYNC); } +static int ad9467_scale_fill(struct adi_axi_adc_conv *conv) +{ + const struct adi_axi_adc_chip_info *info = conv->chip_info; + struct ad9467_state *st = adi_axi_adc_conv_priv(conv); + unsigned int i, val1, val2; + + st->scales = devm_kmalloc_array(&st->spi->dev, info->num_scales, + sizeof(*st->scales), GFP_KERNEL); + if (!st->scales) + return -ENOMEM; + + for (i = 0; i < info->num_scales; i++) { + __ad9467_get_scale(conv, i, &val1, &val2); + st->scales[i][0] = val1; + st->scales[i][1] = val2; + } + + return 0; +} + static int ad9467_preenable_setup(struct adi_axi_adc_conv *conv) { struct ad9467_state *st = adi_axi_adc_conv_priv(conv); @@ -435,6 +477,10 @@ static int ad9467_probe(struct spi_device *spi) conv->chip_info = &info->axi_adc_info; + ret = ad9467_scale_fill(conv); + if (ret) + return ret; + id = ad9467_spi_read(spi, AN877_ADC_REG_CHIP_ID); if (id != conv->chip_info->id) { dev_err(&spi->dev, "Mismatch CHIP_ID, got 0x%X, expected 0x%X\n", @@ -445,6 +491,7 @@ static int ad9467_probe(struct spi_device *spi) conv->reg_access = ad9467_reg_access; conv->write_raw = ad9467_write_raw; conv->read_raw = ad9467_read_raw; + conv->read_avail = ad9467_read_avail; conv->preenable_setup = ad9467_preenable_setup; st->output_mode = info->default_output_mode | diff --git a/drivers/iio/adc/adi-axi-adc.c b/drivers/iio/adc/adi-axi-adc.c index cbe1011a2408..d721fb1bcae7 100644 --- a/drivers/iio/adc/adi-axi-adc.c +++ b/drivers/iio/adc/adi-axi-adc.c @@ -150,6 +150,20 @@ static int adi_axi_adc_write_raw(struct iio_dev *indio_dev, return conv->write_raw(conv, chan, val, val2, mask); } +static int adi_axi_adc_read_avail(struct iio_dev *indio_dev, + struct iio_chan_spec const *chan, + const int **vals, int *type, int *length, + long mask) +{ + struct adi_axi_adc_state *st = iio_priv(indio_dev); + struct adi_axi_adc_conv *conv = &st->client->conv; + + if (!conv->read_avail) + return -EOPNOTSUPP; + + return conv->read_avail(conv, chan, vals, type, length, mask); +} + static int adi_axi_adc_update_scan_mode(struct iio_dev *indio_dev, const unsigned long *scan_mask) { @@ -238,69 +252,11 @@ struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev, } EXPORT_SYMBOL_GPL(devm_adi_axi_adc_conv_register); -static ssize_t in_voltage_scale_available_show(struct device *dev, - struct device_attribute *attr, - char *buf) -{ - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - size_t len = 0; - int i; - - for (i = 0; i < conv->chip_info->num_scales; i++) { - const unsigned int *s = conv->chip_info->scale_table[i]; - - len += scnprintf(buf + len, PAGE_SIZE - len, - "%u.%06u ", s[0], s[1]); - } - buf[len - 1] = '\n'; - - return len; -} - -static IIO_DEVICE_ATTR_RO(in_voltage_scale_available, 0); - -enum { - ADI_AXI_ATTR_SCALE_AVAIL, -}; - -#define ADI_AXI_ATTR(_en_, _file_) \ - [ADI_AXI_ATTR_##_en_] = &iio_dev_attr_##_file_.dev_attr.attr - -static struct attribute *adi_axi_adc_attributes[] = { - ADI_AXI_ATTR(SCALE_AVAIL, in_voltage_scale_available), - NULL -}; - -static umode_t axi_adc_attr_is_visible(struct kobject *kobj, - struct attribute *attr, int n) -{ - struct device *dev = kobj_to_dev(kobj); - struct iio_dev *indio_dev = dev_to_iio_dev(dev); - struct adi_axi_adc_state *st = iio_priv(indio_dev); - struct adi_axi_adc_conv *conv = &st->client->conv; - - switch (n) { - case ADI_AXI_ATTR_SCALE_AVAIL: - if (!conv->chip_info->num_scales) - return 0; - return attr->mode; - default: - return attr->mode; - } -} - -static const struct attribute_group adi_axi_adc_attribute_group = { - .attrs = adi_axi_adc_attributes, - .is_visible = axi_adc_attr_is_visible, -}; - static const struct iio_info adi_axi_adc_info = { .read_raw = &adi_axi_adc_read_raw, .write_raw = &adi_axi_adc_write_raw, - .attrs = &adi_axi_adc_attribute_group, .update_scan_mode = &adi_axi_adc_update_scan_mode, + .read_avail = &adi_axi_adc_read_avail, }; static const struct adi_axi_adc_core_info adi_axi_adc_10_0_a_info = { diff --git a/include/linux/iio/adc/adi-axi-adc.h b/include/linux/iio/adc/adi-axi-adc.h index c5d48e1c2d36..77b7f66e6fa8 100644 --- a/include/linux/iio/adc/adi-axi-adc.h +++ b/include/linux/iio/adc/adi-axi-adc.h @@ -41,6 +41,7 @@ struct adi_axi_adc_chip_info { * @reg_access IIO debugfs_reg_access hook for the client ADC * @read_raw IIO read_raw hook for the client ADC * @write_raw IIO write_raw hook for the client ADC + * @read_avail IIO read_avail hook for the client ADC */ struct adi_axi_adc_conv { const struct adi_axi_adc_chip_info *chip_info; @@ -54,6 +55,9 @@ struct adi_axi_adc_conv { int (*write_raw)(struct adi_axi_adc_conv *conv, struct iio_chan_spec const *chan, int val, int val2, long mask); + int (*read_avail)(struct adi_axi_adc_conv *conv, + struct iio_chan_spec const *chan, + const int **val, int *type, int *length, long mask); }; struct adi_axi_adc_conv *devm_adi_axi_adc_conv_register(struct device *dev, From abcc25a23731c13da94a303c216fb1e70e2b9ad9 Mon Sep 17 00:00:00 2001 From: Namhyung Kim Date: Mon, 11 Dec 2023 23:05:44 -0800 Subject: [PATCH 252/288] perf genelf: Set ELF program header addresses properly [ Upstream commit 1af478903fc48c1409a8dd6b698383b62387adf1 ] The text section starts after the ELF headers so PHDR.p_vaddr and others should have the correct addresses. Fixes: babd04386b1df8c3 ("perf jit: Include program header in ELF files") Reviewed-by: Ian Rogers Signed-off-by: Namhyung Kim Cc: Adrian Hunter Cc: Fangrui Song Cc: Ingo Molnar Cc: Jiri Olsa Cc: Lieven Hey Cc: Milian Wolff Cc: Pablo Galindo Cc: Peter Zijlstra Link: https://lore.kernel.org/r/20231212070547.612536-2-namhyung@kernel.org Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/genelf.c | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/tools/perf/util/genelf.c b/tools/perf/util/genelf.c index 02cd9f75e3d2..89a85601485d 100644 --- a/tools/perf/util/genelf.c +++ b/tools/perf/util/genelf.c @@ -291,9 +291,9 @@ jit_write_elf(int fd, uint64_t load_addr, const char *sym, */ phdr = elf_newphdr(e, 1); phdr[0].p_type = PT_LOAD; - phdr[0].p_offset = 0; - phdr[0].p_vaddr = 0; - phdr[0].p_paddr = 0; + phdr[0].p_offset = GEN_ELF_TEXT_OFFSET; + phdr[0].p_vaddr = GEN_ELF_TEXT_OFFSET; + phdr[0].p_paddr = GEN_ELF_TEXT_OFFSET; phdr[0].p_filesz = csize; phdr[0].p_memsz = csize; phdr[0].p_flags = PF_X | PF_R; From 4e76dbd7c3600b834fce8e3be90310515e149af9 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Thu, 10 Aug 2023 11:14:39 +0200 Subject: [PATCH 253/288] tty: change tty_write_lock()'s ndelay parameter to bool [ Upstream commit af815336556df28f800669c58ab3bdad7d786b98 ] It's a yes-no parameter, so convert it to bool to be obvious. Signed-off-by: "Jiri Slaby (SUSE)" Link: https://lore.kernel.org/r/20230810091510.13006-6-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break") Signed-off-by: Sasha Levin --- drivers/tty/tty.h | 2 +- drivers/tty/tty_io.c | 6 +++--- drivers/tty/tty_ioctl.c | 2 +- 3 files changed, 5 insertions(+), 5 deletions(-) diff --git a/drivers/tty/tty.h b/drivers/tty/tty.h index 1908f27a795a..3d2d82ff6a03 100644 --- a/drivers/tty/tty.h +++ b/drivers/tty/tty.h @@ -64,7 +64,7 @@ int tty_check_change(struct tty_struct *tty); void __stop_tty(struct tty_struct *tty); void __start_tty(struct tty_struct *tty); void tty_write_unlock(struct tty_struct *tty); -int tty_write_lock(struct tty_struct *tty, int ndelay); +int tty_write_lock(struct tty_struct *tty, bool ndelay); void tty_vhangup_session(struct tty_struct *tty); void tty_open_proc_set_tty(struct file *filp, struct tty_struct *tty); int tty_signal_session_leader(struct tty_struct *tty, int exit_session); diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 094e82a12d29..38877489f700 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -948,7 +948,7 @@ void tty_write_unlock(struct tty_struct *tty) wake_up_interruptible_poll(&tty->write_wait, EPOLLOUT); } -int tty_write_lock(struct tty_struct *tty, int ndelay) +int tty_write_lock(struct tty_struct *tty, bool ndelay) { if (!mutex_trylock(&tty->atomic_write_lock)) { if (ndelay) @@ -1167,7 +1167,7 @@ int tty_send_xchar(struct tty_struct *tty, char ch) return 0; } - if (tty_write_lock(tty, 0) < 0) + if (tty_write_lock(tty, false) < 0) return -ERESTARTSYS; down_read(&tty->termios_rwsem); @@ -2473,7 +2473,7 @@ static int send_break(struct tty_struct *tty, unsigned int duration) retval = tty->ops->break_ctl(tty, duration); else { /* Do the work ourselves */ - if (tty_write_lock(tty, 0) < 0) + if (tty_write_lock(tty, false) < 0) return -EINTR; retval = tty->ops->break_ctl(tty, -1); if (retval) diff --git a/drivers/tty/tty_ioctl.c b/drivers/tty/tty_ioctl.c index 68b07250dcb6..12a30329abdb 100644 --- a/drivers/tty/tty_ioctl.c +++ b/drivers/tty/tty_ioctl.c @@ -404,7 +404,7 @@ static int set_termios(struct tty_struct *tty, void __user *arg, int opt) if (retval < 0) return retval; - if (tty_write_lock(tty, 0) < 0) + if (tty_write_lock(tty, false) < 0) goto retry_write_wait; /* Racing writer? */ From 2cf81d34403295f10b6ae5ae1e6ab3151e38e97b Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Tue, 19 Sep 2023 10:51:54 +0200 Subject: [PATCH 254/288] tty: early return from send_break() on TTY_DRIVER_HARDWARE_BREAK [ Upstream commit 66619686d187b4a6395316b7f39881e945dce4bc ] If the driver sets TTY_DRIVER_HARDWARE_BREAK, we leave ops->break_ctl() to the driver and return from send_break(). But we do it using a local variable and keep the code flowing through the end of the function. Instead, do 'return' immediately with the ops->break_ctl()'s return value. This way, we don't have to stuff the 'else' branch of the 'if' with the software break handling. And we can re-indent the function too. Signed-off-by: "Jiri Slaby (SUSE)" Link: https://lore.kernel.org/r/20230919085156.1578-14-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break") Signed-off-by: Sasha Levin --- drivers/tty/tty_io.c | 32 +++++++++++++++++--------------- 1 file changed, 17 insertions(+), 15 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 38877489f700..145c26401218 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2470,22 +2470,24 @@ static int send_break(struct tty_struct *tty, unsigned int duration) return 0; if (tty->driver->flags & TTY_DRIVER_HARDWARE_BREAK) - retval = tty->ops->break_ctl(tty, duration); - else { - /* Do the work ourselves */ - if (tty_write_lock(tty, false) < 0) - return -EINTR; - retval = tty->ops->break_ctl(tty, -1); - if (retval) - goto out; - if (!signal_pending(current)) - msleep_interruptible(duration); - retval = tty->ops->break_ctl(tty, 0); + return tty->ops->break_ctl(tty, duration); + + /* Do the work ourselves */ + if (tty_write_lock(tty, false) < 0) + return -EINTR; + + retval = tty->ops->break_ctl(tty, -1); + if (retval) + goto out; + if (!signal_pending(current)) + msleep_interruptible(duration); + retval = tty->ops->break_ctl(tty, 0); out: - tty_write_unlock(tty); - if (signal_pending(current)) - retval = -EINTR; - } + tty_write_unlock(tty); + + if (signal_pending(current)) + retval = -EINTR; + return retval; } From 3483ca0390c126a95c4c2e66b14940e01e9e5d37 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Tue, 19 Sep 2023 10:51:55 +0200 Subject: [PATCH 255/288] tty: don't check for signal_pending() in send_break() [ Upstream commit fd99392b643b824813df2edbaebe26a2136d31e6 ] msleep_interruptible() will check on its own. So no need to do the check in send_break() before calling the above. Signed-off-by: "Jiri Slaby (SUSE)" Link: https://lore.kernel.org/r/20230919085156.1578-15-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break") Signed-off-by: Sasha Levin --- drivers/tty/tty_io.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 145c26401218..a45e6e1423d8 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2479,8 +2479,7 @@ static int send_break(struct tty_struct *tty, unsigned int duration) retval = tty->ops->break_ctl(tty, -1); if (retval) goto out; - if (!signal_pending(current)) - msleep_interruptible(duration); + msleep_interruptible(duration); retval = tty->ops->break_ctl(tty, 0); out: tty_write_unlock(tty); From d7c74b010aae3482a0c81797e6e58936b3409ce8 Mon Sep 17 00:00:00 2001 From: "Jiri Slaby (SUSE)" Date: Tue, 19 Sep 2023 10:51:56 +0200 Subject: [PATCH 256/288] tty: use 'if' in send_break() instead of 'goto' [ Upstream commit 24f2cd019946fc2e88e632d2e24a34c2cc3f2be4 ] Now, the "jumped-over" code is simple enough to be put inside an 'if'. Do so to make it 'goto'-less. Signed-off-by: "Jiri Slaby (SUSE)" Link: https://lore.kernel.org/r/20230919085156.1578-16-jirislaby@kernel.org Signed-off-by: Greg Kroah-Hartman Stable-dep-of: 66aad7d8d3ec ("usb: cdc-acm: return correct error code on unsupported break") Signed-off-by: Sasha Levin --- drivers/tty/tty_io.c | 9 ++++----- 1 file changed, 4 insertions(+), 5 deletions(-) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index a45e6e1423d8..1c76e77e2d07 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2477,11 +2477,10 @@ static int send_break(struct tty_struct *tty, unsigned int duration) return -EINTR; retval = tty->ops->break_ctl(tty, -1); - if (retval) - goto out; - msleep_interruptible(duration); - retval = tty->ops->break_ctl(tty, 0); -out: + if (!retval) { + msleep_interruptible(duration); + retval = tty->ops->break_ctl(tty, 0); + } tty_write_unlock(tty); if (signal_pending(current)) From 1550b870ae9c73cc6653041f7c4ce661a4b7d7fc Mon Sep 17 00:00:00 2001 From: Oliver Neukum Date: Thu, 7 Dec 2023 14:26:30 +0100 Subject: [PATCH 257/288] usb: cdc-acm: return correct error code on unsupported break [ Upstream commit 66aad7d8d3ec5a3a8ec2023841bcec2ded5f65c9 ] In ACM support for sending breaks to devices is optional. If a device says that it doenot support sending breaks, the host must respect that. Given the number of optional features providing tty operations for each combination is not practical and errors need to be returned dynamically if unsupported features are requested. In case a device does not support break, we want the tty layer to treat that like it treats drivers that statically cannot support sending a break. It ignores the inability and does nothing. This patch uses EOPNOTSUPP to indicate that. Signed-off-by: Oliver Neukum Fixes: 9e98966c7bb94 ("tty: rework break handling") Link: https://lore.kernel.org/r/20231207132639.18250-1-oneukum@suse.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/tty_io.c | 3 +++ drivers/usb/class/cdc-acm.c | 3 +++ 2 files changed, 6 insertions(+) diff --git a/drivers/tty/tty_io.c b/drivers/tty/tty_io.c index 1c76e77e2d07..984e3098e631 100644 --- a/drivers/tty/tty_io.c +++ b/drivers/tty/tty_io.c @@ -2480,6 +2480,9 @@ static int send_break(struct tty_struct *tty, unsigned int duration) if (!retval) { msleep_interruptible(duration); retval = tty->ops->break_ctl(tty, 0); + } else if (retval == -EOPNOTSUPP) { + /* some drivers can tell only dynamically */ + retval = 0; } tty_write_unlock(tty); diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 070b838c7da9..4e4a71307d63 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -896,6 +896,9 @@ static int acm_tty_break_ctl(struct tty_struct *tty, int state) struct acm *acm = tty->driver_data; int retval; + if (!(acm->ctrl_caps & USB_CDC_CAP_BRK)) + return -EOPNOTSUPP; + retval = acm_send_break(acm, state ? 0xffff : 0); if (retval < 0) dev_dbg(&acm->control->dev, From f775f2621c2ac5cc3a0b3a64665dad4fb146e510 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Fri, 22 Dec 2023 16:17:48 +0100 Subject: [PATCH 258/288] nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length [ Upstream commit efa56305908ba20de2104f1b8508c6a7401833be ] If the host sends an H2CData command with an invalid DATAL, the kernel may crash in nvmet_tcp_build_pdu_iovec(). Unable to handle kernel NULL pointer dereference at virtual address 0000000000000000 lr : nvmet_tcp_io_work+0x6ac/0x718 [nvmet_tcp] Call trace: process_one_work+0x174/0x3c8 worker_thread+0x2d0/0x3e8 kthread+0x104/0x110 Fix the bug by raising a fatal error if DATAL isn't coherent with the packet size. Also, the PDU length should never exceed the MAXH2CDATA parameter which has been communicated to the host in nvmet_tcp_handle_icreq(). Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Signed-off-by: Maurizio Lombardi Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch Signed-off-by: Sasha Levin --- drivers/nvme/target/tcp.c | 13 ++++++++++++- 1 file changed, 12 insertions(+), 1 deletion(-) diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index 7ce22d173fc7..153150e8beb9 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -18,6 +18,7 @@ #include "nvmet.h" #define NVMET_TCP_DEF_INLINE_DATA_SIZE (4 * PAGE_SIZE) +#define NVMET_TCP_MAXH2CDATA 0x400000 /* 16M arbitrary limit */ /* Define the socket priority to use for connections were it is desirable * that the NIC consider performing optimized packet processing or filtering. @@ -872,7 +873,7 @@ static int nvmet_tcp_handle_icreq(struct nvmet_tcp_queue *queue) icresp->hdr.pdo = 0; icresp->hdr.plen = cpu_to_le32(icresp->hdr.hlen); icresp->pfv = cpu_to_le16(NVME_TCP_PFV_1_0); - icresp->maxdata = cpu_to_le32(0x400000); /* 16M arbitrary limit */ + icresp->maxdata = cpu_to_le32(NVMET_TCP_MAXH2CDATA); icresp->cpda = 0; if (queue->hdr_digest) icresp->digest |= NVME_TCP_HDR_DIGEST_ENABLE; @@ -918,6 +919,7 @@ static int nvmet_tcp_handle_h2c_data_pdu(struct nvmet_tcp_queue *queue) { struct nvme_tcp_data_pdu *data = &queue->pdu.data; struct nvmet_tcp_cmd *cmd; + unsigned int plen; if (likely(queue->nr_cmds)) { if (unlikely(data->ttag >= queue->nr_cmds)) { @@ -941,7 +943,16 @@ static int nvmet_tcp_handle_h2c_data_pdu(struct nvmet_tcp_queue *queue) return -EPROTO; } + plen = le32_to_cpu(data->hdr.plen); cmd->pdu_len = le32_to_cpu(data->data_length); + if (unlikely(cmd->pdu_len != (plen - sizeof(*data)) || + cmd->pdu_len == 0 || + cmd->pdu_len > NVMET_TCP_MAXH2CDATA)) { + pr_err("H2CData PDU len %u is invalid\n", cmd->pdu_len); + /* FIXME: use proper transport errors */ + nvmet_tcp_fatal_error(queue); + return -EPROTO; + } cmd->pdu_recv = 0; nvmet_tcp_map_pdu_iovec(cmd); queue->cmd = cmd; From 39669fae69f302961d89f38d969c6fcc1d07eb02 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Fri, 22 Dec 2023 16:17:49 +0100 Subject: [PATCH 259/288] nvmet-tcp: fix a crash in nvmet_req_complete() [ Upstream commit 0849a5441358cef02586fb2d60f707c0db195628 ] in nvmet_tcp_handle_h2c_data_pdu(), if the host sends a data_offset different from rbytes_done, the driver ends up calling nvmet_req_complete() passing a status error. The problem is that at this point cmd->req is not yet initialized, the kernel will crash after dereferencing a NULL pointer. Fix the bug by replacing the call to nvmet_req_complete() with nvmet_tcp_fatal_error(). Fixes: 872d26a391da ("nvmet-tcp: add NVMe over TCP target driver") Reviewed-by: Keith Busch Reviewed-by: Sagi Grimberg Signed-off-by: Maurizio Lombardi Signed-off-by: Keith Busch Signed-off-by: Sasha Levin --- drivers/nvme/target/tcp.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-) diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index 153150e8beb9..9ec8ed369eb7 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -938,8 +938,7 @@ static int nvmet_tcp_handle_h2c_data_pdu(struct nvmet_tcp_queue *queue) data->ttag, le32_to_cpu(data->data_offset), cmd->rbytes_done); /* FIXME: use path and transport errors */ - nvmet_req_complete(&cmd->req, - NVME_SC_INVALID_FIELD | NVME_SC_DNR); + nvmet_tcp_fatal_error(queue); return -EPROTO; } From 866d32bff0350c218906266094ce54de8f836491 Mon Sep 17 00:00:00 2001 From: Ian Rogers Date: Wed, 6 Dec 2023 17:46:55 -0800 Subject: [PATCH 260/288] perf env: Avoid recursively taking env->bpf_progs.lock [ Upstream commit 9c51f8788b5d4e9f46afbcf563255cfd355690b3 ] Add variants of perf_env__insert_bpf_prog_info(), perf_env__insert_btf() and perf_env__find_btf prefixed with __ to indicate the env->bpf_progs.lock is assumed held. Call these variants when the lock is held to avoid recursively taking it and potentially having a thread deadlock with itself. Fixes: f8dfeae009effc0b ("perf bpf: Show more BPF program info in print_bpf_prog_info()") Signed-off-by: Ian Rogers Acked-by: Jiri Olsa Acked-by: Song Liu Cc: Adrian Hunter Cc: Alexander Shishkin Cc: Huacai Chen Cc: Ingo Molnar Cc: K Prateek Nayak Cc: Kan Liang Cc: Mark Rutland Cc: Ming Wang Cc: Namhyung Kim Cc: Peter Zijlstra Cc: Ravi Bangoria Link: https://lore.kernel.org/r/20231207014655.1252484-1-irogers@google.com Signed-off-by: Arnaldo Carvalho de Melo Signed-off-by: Sasha Levin --- tools/perf/util/bpf-event.c | 8 +++--- tools/perf/util/bpf-event.h | 12 ++++----- tools/perf/util/env.c | 50 ++++++++++++++++++++++++------------- tools/perf/util/env.h | 4 +++ tools/perf/util/header.c | 8 +++--- 5 files changed, 50 insertions(+), 32 deletions(-) diff --git a/tools/perf/util/bpf-event.c b/tools/perf/util/bpf-event.c index 4eb02762104b..c50d2c7a264f 100644 --- a/tools/perf/util/bpf-event.c +++ b/tools/perf/util/bpf-event.c @@ -533,9 +533,9 @@ int evlist__add_bpf_sb_event(struct evlist *evlist, struct perf_env *env) return perf_evlist__add_sb_event(evlist, &attr, bpf_event__sb_cb, env); } -void bpf_event__print_bpf_prog_info(struct bpf_prog_info *info, - struct perf_env *env, - FILE *fp) +void __bpf_event__print_bpf_prog_info(struct bpf_prog_info *info, + struct perf_env *env, + FILE *fp) { __u32 *prog_lens = (__u32 *)(uintptr_t)(info->jited_func_lens); __u64 *prog_addrs = (__u64 *)(uintptr_t)(info->jited_ksyms); @@ -551,7 +551,7 @@ void bpf_event__print_bpf_prog_info(struct bpf_prog_info *info, if (info->btf_id) { struct btf_node *node; - node = perf_env__find_btf(env, info->btf_id); + node = __perf_env__find_btf(env, info->btf_id); if (node) btf = btf__new((__u8 *)(node->data), node->data_size); diff --git a/tools/perf/util/bpf-event.h b/tools/perf/util/bpf-event.h index 68f315c3df5b..50f7412464df 100644 --- a/tools/perf/util/bpf-event.h +++ b/tools/perf/util/bpf-event.h @@ -34,9 +34,9 @@ struct btf_node { int machine__process_bpf(struct machine *machine, union perf_event *event, struct perf_sample *sample); int evlist__add_bpf_sb_event(struct evlist *evlist, struct perf_env *env); -void bpf_event__print_bpf_prog_info(struct bpf_prog_info *info, - struct perf_env *env, - FILE *fp); +void __bpf_event__print_bpf_prog_info(struct bpf_prog_info *info, + struct perf_env *env, + FILE *fp); #else static inline int machine__process_bpf(struct machine *machine __maybe_unused, union perf_event *event __maybe_unused, @@ -51,9 +51,9 @@ static inline int evlist__add_bpf_sb_event(struct evlist *evlist __maybe_unused, return 0; } -static inline void bpf_event__print_bpf_prog_info(struct bpf_prog_info *info __maybe_unused, - struct perf_env *env __maybe_unused, - FILE *fp __maybe_unused) +static inline void __bpf_event__print_bpf_prog_info(struct bpf_prog_info *info __maybe_unused, + struct perf_env *env __maybe_unused, + FILE *fp __maybe_unused) { } diff --git a/tools/perf/util/env.c b/tools/perf/util/env.c index d81ed1bc14bd..ed2a42abe127 100644 --- a/tools/perf/util/env.c +++ b/tools/perf/util/env.c @@ -17,13 +17,19 @@ struct perf_env perf_env; void perf_env__insert_bpf_prog_info(struct perf_env *env, struct bpf_prog_info_node *info_node) +{ + down_write(&env->bpf_progs.lock); + __perf_env__insert_bpf_prog_info(env, info_node); + up_write(&env->bpf_progs.lock); +} + +void __perf_env__insert_bpf_prog_info(struct perf_env *env, struct bpf_prog_info_node *info_node) { __u32 prog_id = info_node->info_linear->info.id; struct bpf_prog_info_node *node; struct rb_node *parent = NULL; struct rb_node **p; - down_write(&env->bpf_progs.lock); p = &env->bpf_progs.infos.rb_node; while (*p != NULL) { @@ -35,15 +41,13 @@ void perf_env__insert_bpf_prog_info(struct perf_env *env, p = &(*p)->rb_right; } else { pr_debug("duplicated bpf prog info %u\n", prog_id); - goto out; + return; } } rb_link_node(&info_node->rb_node, parent, p); rb_insert_color(&info_node->rb_node, &env->bpf_progs.infos); env->bpf_progs.infos_cnt++; -out: - up_write(&env->bpf_progs.lock); } struct bpf_prog_info_node *perf_env__find_bpf_prog_info(struct perf_env *env, @@ -72,14 +76,22 @@ struct bpf_prog_info_node *perf_env__find_bpf_prog_info(struct perf_env *env, } bool perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node) +{ + bool ret; + + down_write(&env->bpf_progs.lock); + ret = __perf_env__insert_btf(env, btf_node); + up_write(&env->bpf_progs.lock); + return ret; +} + +bool __perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node) { struct rb_node *parent = NULL; __u32 btf_id = btf_node->id; struct btf_node *node; struct rb_node **p; - bool ret = true; - down_write(&env->bpf_progs.lock); p = &env->bpf_progs.btfs.rb_node; while (*p != NULL) { @@ -91,25 +103,31 @@ bool perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node) p = &(*p)->rb_right; } else { pr_debug("duplicated btf %u\n", btf_id); - ret = false; - goto out; + return false; } } rb_link_node(&btf_node->rb_node, parent, p); rb_insert_color(&btf_node->rb_node, &env->bpf_progs.btfs); env->bpf_progs.btfs_cnt++; -out: - up_write(&env->bpf_progs.lock); - return ret; + return true; } struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id) +{ + struct btf_node *res; + + down_read(&env->bpf_progs.lock); + res = __perf_env__find_btf(env, btf_id); + up_read(&env->bpf_progs.lock); + return res; +} + +struct btf_node *__perf_env__find_btf(struct perf_env *env, __u32 btf_id) { struct btf_node *node = NULL; struct rb_node *n; - down_read(&env->bpf_progs.lock); n = env->bpf_progs.btfs.rb_node; while (n) { @@ -119,13 +137,9 @@ struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id) else if (btf_id > node->id) n = n->rb_right; else - goto out; + return node; } - node = NULL; - -out: - up_read(&env->bpf_progs.lock); - return node; + return NULL; } /* purge data in bpf_progs.infos tree */ diff --git a/tools/perf/util/env.h b/tools/perf/util/env.h index 01378a955dd5..ef0fd544cd67 100644 --- a/tools/perf/util/env.h +++ b/tools/perf/util/env.h @@ -139,12 +139,16 @@ const char *perf_env__raw_arch(struct perf_env *env); int perf_env__nr_cpus_avail(struct perf_env *env); void perf_env__init(struct perf_env *env); +void __perf_env__insert_bpf_prog_info(struct perf_env *env, + struct bpf_prog_info_node *info_node); void perf_env__insert_bpf_prog_info(struct perf_env *env, struct bpf_prog_info_node *info_node); struct bpf_prog_info_node *perf_env__find_bpf_prog_info(struct perf_env *env, __u32 prog_id); bool perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node); +bool __perf_env__insert_btf(struct perf_env *env, struct btf_node *btf_node); struct btf_node *perf_env__find_btf(struct perf_env *env, __u32 btf_id); +struct btf_node *__perf_env__find_btf(struct perf_env *env, __u32 btf_id); int perf_env__numa_node(struct perf_env *env, int cpu); #endif /* __PERF_ENV_H */ diff --git a/tools/perf/util/header.c b/tools/perf/util/header.c index dd06770b43f1..d2812d98968d 100644 --- a/tools/perf/util/header.c +++ b/tools/perf/util/header.c @@ -1655,8 +1655,8 @@ static void print_bpf_prog_info(struct feat_fd *ff, FILE *fp) node = rb_entry(next, struct bpf_prog_info_node, rb_node); next = rb_next(&node->rb_node); - bpf_event__print_bpf_prog_info(&node->info_linear->info, - env, fp); + __bpf_event__print_bpf_prog_info(&node->info_linear->info, + env, fp); } up_read(&env->bpf_progs.lock); @@ -2927,7 +2927,7 @@ static int process_bpf_prog_info(struct feat_fd *ff, void *data __maybe_unused) /* after reading from file, translate offset to address */ bpf_program__bpil_offs_to_addr(info_linear); info_node->info_linear = info_linear; - perf_env__insert_bpf_prog_info(env, info_node); + __perf_env__insert_bpf_prog_info(env, info_node); } up_write(&env->bpf_progs.lock); @@ -2980,7 +2980,7 @@ static int process_bpf_btf(struct feat_fd *ff, void *data __maybe_unused) if (__do_read(ff, node->data, data_size)) goto out; - perf_env__insert_btf(env, node); + __perf_env__insert_btf(env, node); node = NULL; } From 5ff00408e5029d3550ee77f62dc15f1e15c47f87 Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin Date: Thu, 28 Dec 2023 19:07:43 +0300 Subject: [PATCH 261/288] apparmor: avoid crash when parsed profile name is empty [ Upstream commit 55a8210c9e7d21ff2644809699765796d4bfb200 ] When processing a packed profile in unpack_profile() described like "profile :ns::samba-dcerpcd /usr/lib*/samba/{,samba/}samba-dcerpcd {...}" a string ":samba-dcerpcd" is unpacked as a fully-qualified name and then passed to aa_splitn_fqname(). aa_splitn_fqname() treats ":samba-dcerpcd" as only containing a namespace. Thus it returns NULL for tmpname, meanwhile tmpns is non-NULL. Later aa_alloc_profile() crashes as the new profile name is NULL now. general protection fault, probably for non-canonical address 0xdffffc0000000000: 0000 [#1] PREEMPT SMP KASAN NOPTI KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007] CPU: 6 PID: 1657 Comm: apparmor_parser Not tainted 6.7.0-rc2-dirty #16 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.16.2-3-gd478f380-rebuilt.opensuse.org 04/01/2014 RIP: 0010:strlen+0x1e/0xa0 Call Trace: ? strlen+0x1e/0xa0 aa_policy_init+0x1bb/0x230 aa_alloc_profile+0xb1/0x480 unpack_profile+0x3bc/0x4960 aa_unpack+0x309/0x15e0 aa_replace_profiles+0x213/0x33c0 policy_update+0x261/0x370 profile_replace+0x20e/0x2a0 vfs_write+0x2af/0xe00 ksys_write+0x126/0x250 do_syscall_64+0x46/0xf0 entry_SYSCALL_64_after_hwframe+0x6e/0x76 ---[ end trace 0000000000000000 ]--- RIP: 0010:strlen+0x1e/0xa0 It seems such behaviour of aa_splitn_fqname() is expected and checked in other places where it is called (e.g. aa_remove_profiles). Well, there is an explicit comment "a ns name without a following profile is allowed" inside. AFAICS, nothing can prevent unpacked "name" to be in form like ":samba-dcerpcd" - it is passed from userspace. Deny the whole profile set replacement in such case and inform user with EPROTO and an explaining message. Found by Linux Verification Center (linuxtesting.org). Fixes: 04dc715e24d0 ("apparmor: audit policy ns specified in policy load") Signed-off-by: Fedor Pchelkin Signed-off-by: John Johansen Signed-off-by: Sasha Levin --- security/apparmor/policy_unpack.c | 4 ++++ 1 file changed, 4 insertions(+) diff --git a/security/apparmor/policy_unpack.c b/security/apparmor/policy_unpack.c index 10896d69c442..6c2a536173b5 100644 --- a/security/apparmor/policy_unpack.c +++ b/security/apparmor/policy_unpack.c @@ -696,6 +696,10 @@ static struct aa_profile *unpack_profile(struct aa_ext *e, char **ns_name) tmpname = aa_splitn_fqname(name, strlen(name), &tmpns, &ns_len); if (tmpns) { + if (!tmpname) { + info = "empty profile name"; + goto fail; + } *ns_name = kstrndup(tmpns, ns_len, GFP_KERNEL); if (!*ns_name) { info = "out of memory"; From 172276460ab5e9e1ac3321ef4f5c300dfd786a59 Mon Sep 17 00:00:00 2001 From: Christoph Niedermaier Date: Sun, 24 Dec 2023 10:32:09 +0100 Subject: [PATCH 262/288] serial: imx: Correct clock error message in function probe() MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit 3e189470cad27d41a3a9dc02649f965b7ed1c90f ] Correct the clock error message by changing the clock name. Fixes: 1e512d45332b ("serial: imx: add error messages when .probe fails") Signed-off-by: Christoph Niedermaier Reviewed-by: Uwe Kleine-König Link: https://lore.kernel.org/r/20231224093209.2612-1-cniedermaier@dh-electronics.com Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin --- drivers/tty/serial/imx.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/tty/serial/imx.c b/drivers/tty/serial/imx.c index 8bb7d5b5de9d..6e49928bb864 100644 --- a/drivers/tty/serial/imx.c +++ b/drivers/tty/serial/imx.c @@ -2346,7 +2346,7 @@ static int imx_uart_probe(struct platform_device *pdev) /* For register access, we only need to enable the ipg clock. */ ret = clk_prepare_enable(sport->clk_ipg); if (ret) { - dev_err(&pdev->dev, "failed to enable per clk: %d\n", ret); + dev_err(&pdev->dev, "failed to enable ipg clk: %d\n", ret); return ret; } From 0de2e62067d2a6733a5b8ca24066d9bbdfefaf47 Mon Sep 17 00:00:00 2001 From: Maurizio Lombardi Date: Fri, 5 Jan 2024 09:14:44 +0100 Subject: [PATCH 263/288] nvmet-tcp: Fix the H2C expected PDU len calculation [ Upstream commit 9a1abc24850eb759e36a2f8869161c3b7254c904 ] The nvmet_tcp_handle_h2c_data_pdu() function should take into consideration the possibility that the header digest and/or the data digests are enabled when calculating the expected PDU length, before comparing it to the value stored in cmd->pdu_len. Fixes: efa56305908b ("nvmet-tcp: Fix a kernel panic when host sends an invalid H2C PDU length") Signed-off-by: Maurizio Lombardi Reviewed-by: Sagi Grimberg Signed-off-by: Keith Busch Signed-off-by: Sasha Levin --- drivers/nvme/target/tcp.c | 10 +++++++--- 1 file changed, 7 insertions(+), 3 deletions(-) diff --git a/drivers/nvme/target/tcp.c b/drivers/nvme/target/tcp.c index 9ec8ed369eb7..116ae6fd35e2 100644 --- a/drivers/nvme/target/tcp.c +++ b/drivers/nvme/target/tcp.c @@ -919,7 +919,7 @@ static int nvmet_tcp_handle_h2c_data_pdu(struct nvmet_tcp_queue *queue) { struct nvme_tcp_data_pdu *data = &queue->pdu.data; struct nvmet_tcp_cmd *cmd; - unsigned int plen; + unsigned int exp_data_len; if (likely(queue->nr_cmds)) { if (unlikely(data->ttag >= queue->nr_cmds)) { @@ -942,9 +942,13 @@ static int nvmet_tcp_handle_h2c_data_pdu(struct nvmet_tcp_queue *queue) return -EPROTO; } - plen = le32_to_cpu(data->hdr.plen); + exp_data_len = le32_to_cpu(data->hdr.plen) - + nvmet_tcp_hdgst_len(queue) - + nvmet_tcp_ddgst_len(queue) - + sizeof(*data); + cmd->pdu_len = le32_to_cpu(data->data_length); - if (unlikely(cmd->pdu_len != (plen - sizeof(*data)) || + if (unlikely(cmd->pdu_len != exp_data_len || cmd->pdu_len == 0 || cmd->pdu_len > NVMET_TCP_MAXH2CDATA)) { pr_err("H2CData PDU len %u is invalid\n", cmd->pdu_len); From 178b4373446dbe18bf00278303112efda71649de Mon Sep 17 00:00:00 2001 From: Siddharth Vadapalli Date: Wed, 27 Sep 2023 09:48:45 +0530 Subject: [PATCH 264/288] PCI: keystone: Fix race condition when initializing PHYs MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit c12ca110c613a81cb0f0099019c839d078cd0f38 ] The PCI driver invokes the PHY APIs using the ks_pcie_enable_phy() function. The PHY in this case is the Serdes. It is possible that the PCI instance is configured for two lane operation across two different Serdes instances, using one lane of each Serdes. In such a configuration, if the reference clock for one Serdes is provided by the other Serdes, it results in a race condition. After the Serdes providing the reference clock is initialized by the PCI driver by invoking its PHY APIs, it is not guaranteed that this Serdes remains powered on long enough for the PHY APIs based initialization of the dependent Serdes. In such cases, the PLL of the dependent Serdes fails to lock due to the absence of the reference clock from the former Serdes which has been powered off by the PM Core. Fix this by obtaining reference to the PHYs before invoking the PHY initialization APIs and releasing reference after the initialization is complete. Link: https://lore.kernel.org/linux-pci/20230927041845.1222080-1-s-vadapalli@ti.com Fixes: 49229238ab47 ("PCI: keystone: Cleanup PHY handling") Signed-off-by: Siddharth Vadapalli Signed-off-by: Krzysztof Wilczyński Acked-by: Ravi Gunasekaran Signed-off-by: Sasha Levin --- drivers/pci/controller/dwc/pci-keystone.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/pci/controller/dwc/pci-keystone.c b/drivers/pci/controller/dwc/pci-keystone.c index afaea201a5af..d3c3ca3ef4ba 100644 --- a/drivers/pci/controller/dwc/pci-keystone.c +++ b/drivers/pci/controller/dwc/pci-keystone.c @@ -1261,7 +1261,16 @@ static int ks_pcie_probe(struct platform_device *pdev) goto err_link; } + /* Obtain references to the PHYs */ + for (i = 0; i < num_lanes; i++) + phy_pm_runtime_get_sync(ks_pcie->phy[i]); + ret = ks_pcie_enable_phy(ks_pcie); + + /* Release references to the PHYs */ + for (i = 0; i < num_lanes; i++) + phy_pm_runtime_put_sync(ks_pcie->phy[i]); + if (ret) { dev_err(dev, "failed to enable phy\n"); goto err_link; From b55808b96e637c6c9d549152d812f7c822d80e0d Mon Sep 17 00:00:00 2001 From: Niklas Schnelle Date: Tue, 28 Nov 2023 16:22:49 +0100 Subject: [PATCH 265/288] s390/pci: fix max size calculation in zpci_memcpy_toio() [ Upstream commit 80df7d6af7f6d229b34cf237b2cc9024c07111cd ] The zpci_get_max_write_size() helper is used to determine the maximum size a PCI store or load can use at a given __iomem address. For the PCI block store the following restrictions apply: 1. The dst + len must not cross a 4K boundary in the (pseudo-)MMIO space 2. len must not exceed ZPCI_MAX_WRITE_SIZE 3. len must be a multiple of 8 bytes 4. The src address must be double word (8 byte) aligned 5. The dst address must be double word (8 byte) aligned Otherwise only a normal PCI store which takes its src value from a register can be used. For these PCI store restriction 1 still applies. Similarly 1 also applies to PCI loads. It turns out zpci_max_write_size() instead implements stricter conditions which prevents PCI block stores from being used where they can and should be used. In particular instead of conditions 4 and 5 it wrongly enforces both dst and src to be size aligned. This indirectly covers condition 1 but also prevents many legal PCI block stores. On top of the functional shortcomings the zpci_get_max_write_size() is misnamed as it is used for both read and write size calculations. Rename it to zpci_get_max_io_size() and implement the listed conditions explicitly. Reviewed-by: Matthew Rosato Fixes: cd24834130ac ("s390/pci: base support") Signed-off-by: Niklas Schnelle [agordeev@linux.ibm.com replaced spaces with tabs] Signed-off-by: Alexander Gordeev Signed-off-by: Sasha Levin --- arch/s390/include/asm/pci_io.h | 32 ++++++++++++++++++-------------- arch/s390/pci/pci_mmio.c | 12 ++++++------ 2 files changed, 24 insertions(+), 20 deletions(-) diff --git a/arch/s390/include/asm/pci_io.h b/arch/s390/include/asm/pci_io.h index 287bb88f7698..2686bee800e3 100644 --- a/arch/s390/include/asm/pci_io.h +++ b/arch/s390/include/asm/pci_io.h @@ -11,6 +11,8 @@ /* I/O size constraints */ #define ZPCI_MAX_READ_SIZE 8 #define ZPCI_MAX_WRITE_SIZE 128 +#define ZPCI_BOUNDARY_SIZE (1 << 12) +#define ZPCI_BOUNDARY_MASK (ZPCI_BOUNDARY_SIZE - 1) /* I/O Map */ #define ZPCI_IOMAP_SHIFT 48 @@ -125,16 +127,18 @@ static inline int zpci_read_single(void *dst, const volatile void __iomem *src, int zpci_write_block(volatile void __iomem *dst, const void *src, unsigned long len); -static inline u8 zpci_get_max_write_size(u64 src, u64 dst, int len, int max) +static inline int zpci_get_max_io_size(u64 src, u64 dst, int len, int max) { - int count = len > max ? max : len, size = 1; + int offset = dst & ZPCI_BOUNDARY_MASK; + int size; - while (!(src & 0x1) && !(dst & 0x1) && ((size << 1) <= count)) { - dst = dst >> 1; - src = src >> 1; - size = size << 1; - } - return size; + size = min3(len, ZPCI_BOUNDARY_SIZE - offset, max); + if (IS_ALIGNED(src, 8) && IS_ALIGNED(dst, 8) && IS_ALIGNED(size, 8)) + return size; + + if (size >= 8) + return 8; + return rounddown_pow_of_two(size); } static inline int zpci_memcpy_fromio(void *dst, @@ -144,9 +148,9 @@ static inline int zpci_memcpy_fromio(void *dst, int size, rc = 0; while (n > 0) { - size = zpci_get_max_write_size((u64 __force) src, - (u64) dst, n, - ZPCI_MAX_READ_SIZE); + size = zpci_get_max_io_size((u64 __force) src, + (u64) dst, n, + ZPCI_MAX_READ_SIZE); rc = zpci_read_single(dst, src, size); if (rc) break; @@ -166,9 +170,9 @@ static inline int zpci_memcpy_toio(volatile void __iomem *dst, return -EINVAL; while (n > 0) { - size = zpci_get_max_write_size((u64 __force) dst, - (u64) src, n, - ZPCI_MAX_WRITE_SIZE); + size = zpci_get_max_io_size((u64 __force) dst, + (u64) src, n, + ZPCI_MAX_WRITE_SIZE); if (size > 8) /* main path */ rc = zpci_write_block(dst, src, size); else diff --git a/arch/s390/pci/pci_mmio.c b/arch/s390/pci/pci_mmio.c index 1ec8076209ca..6e7c4762bd23 100644 --- a/arch/s390/pci/pci_mmio.c +++ b/arch/s390/pci/pci_mmio.c @@ -100,9 +100,9 @@ static inline int __memcpy_toio_inuser(void __iomem *dst, old_fs = enable_sacf_uaccess(); while (n > 0) { - size = zpci_get_max_write_size((u64 __force) dst, - (u64 __force) src, n, - ZPCI_MAX_WRITE_SIZE); + size = zpci_get_max_io_size((u64 __force) dst, + (u64 __force) src, n, + ZPCI_MAX_WRITE_SIZE); if (size > 8) /* main path */ rc = __pcistb_mio_inuser(dst, src, size, &status); else @@ -252,9 +252,9 @@ static inline int __memcpy_fromio_inuser(void __user *dst, old_fs = enable_sacf_uaccess(); while (n > 0) { - size = zpci_get_max_write_size((u64 __force) src, - (u64 __force) dst, n, - ZPCI_MAX_READ_SIZE); + size = zpci_get_max_io_size((u64 __force) src, + (u64 __force) dst, n, + ZPCI_MAX_READ_SIZE); rc = __pcilg_mio_inuser(dst, src, size, &status); if (rc) break; From 2295c22348faf795e1ccdf618f6eb7afdb2f7447 Mon Sep 17 00:00:00 2001 From: Lin Ma Date: Wed, 10 Jan 2024 14:14:00 +0800 Subject: [PATCH 266/288] net: qualcomm: rmnet: fix global oob in rmnet_policy [ Upstream commit b33fb5b801c6db408b774a68e7c8722796b59ecc ] The variable rmnet_link_ops assign a *bigger* maxtype which leads to a global out-of-bounds read when parsing the netlink attributes. See bug trace below: ================================================================== BUG: KASAN: global-out-of-bounds in validate_nla lib/nlattr.c:386 [inline] BUG: KASAN: global-out-of-bounds in __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 Read of size 1 at addr ffffffff92c438d0 by task syz-executor.6/84207 CPU: 0 PID: 84207 Comm: syz-executor.6 Tainted: G N 6.1.0 #3 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.13.0-1ubuntu1.1 04/01/2014 Call Trace: __dump_stack lib/dump_stack.c:88 [inline] dump_stack_lvl+0x8b/0xb3 lib/dump_stack.c:106 print_address_description mm/kasan/report.c:284 [inline] print_report+0x172/0x475 mm/kasan/report.c:395 kasan_report+0xbb/0x1c0 mm/kasan/report.c:495 validate_nla lib/nlattr.c:386 [inline] __nla_validate_parse+0x24af/0x2750 lib/nlattr.c:600 __nla_parse+0x3e/0x50 lib/nlattr.c:697 nla_parse_nested_deprecated include/net/netlink.h:1248 [inline] __rtnl_newlink+0x50a/0x1880 net/core/rtnetlink.c:3485 rtnl_newlink+0x64/0xa0 net/core/rtnetlink.c:3594 rtnetlink_rcv_msg+0x43c/0xd70 net/core/rtnetlink.c:6091 netlink_rcv_skb+0x14f/0x410 net/netlink/af_netlink.c:2540 netlink_unicast_kernel net/netlink/af_netlink.c:1319 [inline] netlink_unicast+0x54e/0x800 net/netlink/af_netlink.c:1345 netlink_sendmsg+0x930/0xe50 net/netlink/af_netlink.c:1921 sock_sendmsg_nosec net/socket.c:714 [inline] sock_sendmsg+0x154/0x190 net/socket.c:734 ____sys_sendmsg+0x6df/0x840 net/socket.c:2482 ___sys_sendmsg+0x110/0x1b0 net/socket.c:2536 __sys_sendmsg+0xf3/0x1c0 net/socket.c:2565 do_syscall_x64 arch/x86/entry/common.c:50 [inline] do_syscall_64+0x3b/0x90 arch/x86/entry/common.c:80 entry_SYSCALL_64_after_hwframe+0x63/0xcd RIP: 0033:0x7fdcf2072359 Code: 28 00 00 00 75 05 48 83 c4 28 c3 e8 f1 19 00 00 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 c7 c1 b8 ff ff ff f7 d8 64 89 01 48 RSP: 002b:00007fdcf13e3168 EFLAGS: 00000246 ORIG_RAX: 000000000000002e RAX: ffffffffffffffda RBX: 00007fdcf219ff80 RCX: 00007fdcf2072359 RDX: 0000000000000000 RSI: 0000000020000200 RDI: 0000000000000003 RBP: 00007fdcf20bd493 R08: 0000000000000000 R09: 0000000000000000 R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000000 R13: 00007fffbb8d7bdf R14: 00007fdcf13e3300 R15: 0000000000022000 The buggy address belongs to the variable: rmnet_policy+0x30/0xe0 The buggy address belongs to the physical page: page:0000000065bdeb3c refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x155243 flags: 0x200000000001000(reserved|node=0|zone=2) raw: 0200000000001000 ffffea00055490c8 ffffea00055490c8 0000000000000000 raw: 0000000000000000 0000000000000000 00000001ffffffff 0000000000000000 page dumped because: kasan: bad access detected Memory state around the buggy address: ffffffff92c43780: f9 f9 f9 f9 00 00 00 02 f9 f9 f9 f9 00 00 00 07 ffffffff92c43800: f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 06 f9 f9 f9 >ffffffff92c43880: f9 f9 f9 f9 00 00 00 00 00 00 f9 f9 f9 f9 f9 f9 ^ ffffffff92c43900: 00 00 00 00 00 00 00 00 07 f9 f9 f9 f9 f9 f9 f9 ffffffff92c43980: 00 00 00 07 f9 f9 f9 f9 00 00 00 05 f9 f9 f9 f9 According to the comment of `nla_parse_nested_deprecated`, the maxtype should be len(destination array) - 1. Hence use `IFLA_RMNET_MAX` here. Fixes: 14452ca3b5ce ("net: qualcomm: rmnet: Export mux_id and flags to netlink") Signed-off-by: Lin Ma Reviewed-by: Subash Abhinov Kasiviswanathan Reviewed-by: Simon Horman Reviewed-by: Jiri Pirko Link: https://lore.kernel.org/r/20240110061400.3356108-1-linma@zju.edu.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c index 8d51b0cb545c..93fa10ad08a0 100644 --- a/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c +++ b/drivers/net/ethernet/qualcomm/rmnet/rmnet_config.c @@ -389,7 +389,7 @@ static int rmnet_fill_info(struct sk_buff *skb, const struct net_device *dev) struct rtnl_link_ops rmnet_link_ops __read_mostly = { .kind = "rmnet", - .maxtype = __IFLA_RMNET_MAX, + .maxtype = IFLA_RMNET_MAX, .priv_size = sizeof(struct rmnet_priv), .setup = rmnet_vnd_setup, .validate = rmnet_rtnl_validate, From 1658d7a7a207fa06270a2439a0c91d6c04c3f72c Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Sanju=C3=A1n=20Garc=C3=ADa=2C=20Jorge?= Date: Fri, 5 Jan 2024 08:55:43 +0000 Subject: [PATCH 267/288] net: ethernet: ti: am65-cpsw: Fix max mtu to fit ethernet frames [ Upstream commit 64e47d8afb5ca533b27efc006405e5bcae2c4a7b ] The value of AM65_CPSW_MAX_PACKET_SIZE represents the maximum length of a received frame. This value is written to the register AM65_CPSW_PORT_REG_RX_MAXLEN. The maximum MTU configured on the network device should then leave some room for the ethernet headers and frame check. Otherwise, if the network interface is configured to its maximum mtu possible, the frames will be larger than AM65_CPSW_MAX_PACKET_SIZE and will get dropped as oversized. The switch supports ethernet frame sizes between 64 and 2024 bytes (including VLAN) as stated in the technical reference manual, so define AM65_CPSW_MAX_PACKET_SIZE with that maximum size. Fixes: 93a76530316a ("net: ethernet: ti: introduce am65x/j721e gigabit eth subsystem driver") Signed-off-by: Jorge Sanjuan Garcia Reviewed-by: Horatiu Vultur Reviewed-by: Siddharth Vadapalli Link: https://lore.kernel.org/r/20240105085530.14070-2-jorge.sanjuangarcia@duagon.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/ethernet/ti/am65-cpsw-nuss.c | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/ti/am65-cpsw-nuss.c b/drivers/net/ethernet/ti/am65-cpsw-nuss.c index d10324431354..94e36deefe88 100644 --- a/drivers/net/ethernet/ti/am65-cpsw-nuss.c +++ b/drivers/net/ethernet/ti/am65-cpsw-nuss.c @@ -51,7 +51,7 @@ #define AM65_CPSW_MAX_PORTS 8 #define AM65_CPSW_MIN_PACKET_SIZE VLAN_ETH_ZLEN -#define AM65_CPSW_MAX_PACKET_SIZE (VLAN_ETH_FRAME_LEN + ETH_FCS_LEN) +#define AM65_CPSW_MAX_PACKET_SIZE 2024 #define AM65_CPSW_REG_CTL 0x004 #define AM65_CPSW_REG_STAT_PORT_EN 0x014 @@ -1853,7 +1853,8 @@ static int am65_cpsw_nuss_init_ndev_2g(struct am65_cpsw_common *common) ether_addr_copy(port->ndev->dev_addr, port->slave.mac_addr); port->ndev->min_mtu = AM65_CPSW_MIN_PACKET_SIZE; - port->ndev->max_mtu = AM65_CPSW_MAX_PACKET_SIZE; + port->ndev->max_mtu = AM65_CPSW_MAX_PACKET_SIZE - + (VLAN_ETH_HLEN + ETH_FCS_LEN); port->ndev->hw_features = NETIF_F_SG | NETIF_F_RXCSUM | NETIF_F_HW_CSUM | From ba77c8b4e106717f426a4c2ce79d3c68030a7c01 Mon Sep 17 00:00:00 2001 From: Claudiu Beznea Date: Fri, 5 Jan 2024 10:52:42 +0200 Subject: [PATCH 268/288] net: phy: micrel: populate .soft_reset for KSZ9131 [ Upstream commit e398822c4751017fe401f57409488f5948d12fb5 ] The RZ/G3S SMARC Module has 2 KSZ9131 PHYs. In this setup, the KSZ9131 PHY is used with the ravb Ethernet driver. It has been discovered that when bringing the Ethernet interface down/up continuously, e.g., with the following sh script: $ while :; do ifconfig eth0 down; ifconfig eth0 up; done the link speed and duplex are wrong after interrupting the bring down/up operation even though the Ethernet interface is up. To recover from this state the following configuration sequence is necessary (executed manually): $ ifconfig eth0 down $ ifconfig eth0 up The behavior has been identified also on the Microchip SAMA7G5-EK board which runs the macb driver and uses the same PHY. The order of PHY-related operations in ravb_open() is as follows: ravb_open() -> ravb_phy_start() -> ravb_phy_init() -> of_phy_connect() -> phy_connect_direct() -> phy_attach_direct() -> phy_init_hw() -> phydev->drv->soft_reset() phydev->drv->config_init() phydev->drv->config_intr() phy_resume() kszphy_resume() The order of PHY-related operations in ravb_close is as follows: ravb_close() -> phy_stop() -> phy_suspend() -> kszphy_suspend() -> genphy_suspend() // set BMCR_PDOWN bit in MII_BMCR In genphy_suspend() setting the BMCR_PDWN bit in MII_BMCR switches the PHY to Software Power-Down (SPD) mode (according to the KSZ9131 datasheet). Thus, when opening the interface after it has been previously closed (via ravb_close()), the phydev->drv->config_init() and phydev->drv->config_intr() reach the KSZ9131 PHY driver via the ksz9131_config_init() and kszphy_config_intr() functions. KSZ9131 specifies that the MII management interface remains operational during SPD (Software Power-Down), but (according to manual): - Only access to the standard registers (0 through 31) is supported. - Access to MMD address spaces other than MMD address space 1 is possible if the spd_clock_gate_override bit is set. - Access to MMD address space 1 is not possible. The spd_clock_gate_override bit is not used in the KSZ9131 driver. ksz9131_config_init() configures RGMII delay, pad skews and LEDs by accessesing MMD registers other than those in address space 1. The datasheet for the KSZ9131 does not specify what happens if registers from an unsupported address space are accessed while the PHY is in SPD. To fix the issue the .soft_reset method has been instantiated for KSZ9131, too. This resets the PHY to the default state before doing any configurations to it, thus switching it out of SPD. Fixes: bff5b4b37372 ("net: phy: micrel: add Microchip KSZ9131 initial driver") Signed-off-by: Claudiu Beznea Reviewed-by: Maxime Chevallier Reviewed-by: Andrew Lunn Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/phy/micrel.c | 1 + 1 file changed, 1 insertion(+) diff --git a/drivers/net/phy/micrel.c b/drivers/net/phy/micrel.c index bbbe198f83e8..2b7616f161d6 100644 --- a/drivers/net/phy/micrel.c +++ b/drivers/net/phy/micrel.c @@ -1345,6 +1345,7 @@ static struct phy_driver ksphy_driver[] = { /* PHY_GBIT_FEATURES */ .driver_data = &ksz9021_type, .probe = kszphy_probe, + .soft_reset = genphy_soft_reset, .config_init = ksz9131_config_init, .read_status = genphy_read_status, .ack_interrupt = kszphy_ack_interrupt, From 6c8a5bbca6e65c3540b47b72257eb0a25544b287 Mon Sep 17 00:00:00 2001 From: Nikita Yushchenko Date: Sat, 13 Jan 2024 10:22:21 +0600 Subject: [PATCH 269/288] net: ravb: Fix dma_addr_t truncation in error case MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit e327b2372bc0f18c30433ac40be07741b59231c5 ] In ravb_start_xmit(), ravb driver uses u32 variable to store result of dma_map_single() call. Since ravb hardware has 32-bit address fields in descriptors, this works properly when mapping is successful - it is platform's job to provide mapping addresses that fit into hardware limitations. However, in failure case dma_map_single() returns DMA_MAPPING_ERROR constant that is 64-bit when dma_addr_t is 64-bit. Storing this constant in u32 leads to truncation, and further call to dma_mapping_error() fails to notice the error. Fix that by storing result of dma_map_single() in a dma_addr_t variable. Fixes: c156633f1353 ("Renesas Ethernet AVB driver proper") Signed-off-by: Nikita Yushchenko Reviewed-by: Niklas Söderlund Reviewed-by: Sergey Shtylyov Reviewed-by: Florian Fainelli Signed-off-by: David S. Miller Signed-off-by: Sasha Levin --- drivers/net/ethernet/renesas/ravb_main.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/renesas/ravb_main.c b/drivers/net/ethernet/renesas/ravb_main.c index f092f468016b..8a4dff0566f7 100644 --- a/drivers/net/ethernet/renesas/ravb_main.c +++ b/drivers/net/ethernet/renesas/ravb_main.c @@ -1500,7 +1500,7 @@ static netdev_tx_t ravb_start_xmit(struct sk_buff *skb, struct net_device *ndev) struct ravb_tstamp_skb *ts_skb; struct ravb_tx_desc *desc; unsigned long flags; - u32 dma_addr; + dma_addr_t dma_addr; void *buffer; u32 entry; u32 len; From b099b495e1da3334fe666774201ea774e8c262df Mon Sep 17 00:00:00 2001 From: Kunwu Chan Date: Thu, 11 Jan 2024 15:20:18 +0800 Subject: [PATCH 270/288] net: dsa: vsc73xx: Add null pointer check to vsc73xx_gpio_probe [ Upstream commit 776dac5a662774f07a876b650ba578d0a62d20db ] devm_kasprintf() returns a pointer to dynamically allocated memory which can be NULL upon failure. Fixes: 05bd97fc559d ("net: dsa: Add Vitesse VSC73xx DSA router driver") Signed-off-by: Kunwu Chan Suggested-by: Jakub Kicinski Reviewed-by: Simon Horman Link: https://lore.kernel.org/r/20240111072018.75971-1-chentao@kylinos.cn Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- drivers/net/dsa/vitesse-vsc73xx-core.c | 2 ++ 1 file changed, 2 insertions(+) diff --git a/drivers/net/dsa/vitesse-vsc73xx-core.c b/drivers/net/dsa/vitesse-vsc73xx-core.c index 80eadf509c0a..018988b95035 100644 --- a/drivers/net/dsa/vitesse-vsc73xx-core.c +++ b/drivers/net/dsa/vitesse-vsc73xx-core.c @@ -1119,6 +1119,8 @@ static int vsc73xx_gpio_probe(struct vsc73xx *vsc) vsc->gc.label = devm_kasprintf(vsc->dev, GFP_KERNEL, "VSC%04x", vsc->chipid); + if (!vsc->gc.label) + return -ENOMEM; vsc->gc.ngpio = 4; vsc->gc.owner = THIS_MODULE; vsc->gc.parent = vsc->dev; From 2d4c0798a1ef8db15b3277697ac2def4eda42312 Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Sun, 14 Jan 2024 23:53:39 +0100 Subject: [PATCH 271/288] netfilter: nf_tables: do not allow mismatch field size and set key length [ Upstream commit 3ce67e3793f48c1b9635beb9bb71116ca1e51b58 ] The set description provides the size of each field in the set whose sum should not mismatch the set key length, bail out otherwise. I did not manage to crash nft_set_pipapo with mismatch fields and set key length so far, but this is UB which must be disallowed. Fixes: f3a2181e16f1 ("netfilter: nf_tables: Support for sets with multiple ranged fields") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 6e91c743a4d4..009cb23bc972 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4302,8 +4302,8 @@ static int nft_set_desc_concat_parse(const struct nlattr *attr, static int nft_set_desc_concat(struct nft_set_desc *desc, const struct nlattr *nla) { + u32 num_regs = 0, key_num_regs = 0; struct nlattr *attr; - u32 num_regs = 0; int rem, err, i; nla_for_each_nested(attr, nla, rem) { @@ -4318,6 +4318,10 @@ static int nft_set_desc_concat(struct nft_set_desc *desc, for (i = 0; i < desc->field_count; i++) num_regs += DIV_ROUND_UP(desc->field_len[i], sizeof(u32)); + key_num_regs = DIV_ROUND_UP(desc->klen, sizeof(u32)); + if (key_num_regs != num_regs) + return -EINVAL; + if (num_regs > NFT_REG32_COUNT) return -E2BIG; From 9a4d25267d503072cfda2e7ecf30117b89046d6c Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 15 Jan 2024 00:14:38 +0100 Subject: [PATCH 272/288] netfilter: nf_tables: skip dead set elements in netlink dump [ Upstream commit 6b1ca88e4bb63673dc9f9c7f23c899f22c3cb17a ] Delete from packet path relies on the garbage collector to purge elements with NFT_SET_ELEM_DEAD_BIT on. Skip these dead elements from nf_tables_dump_setelem() path, I very rarely see tests/shell/testcases/maps/typeof_maps_add_delete reports [DUMP FAILED] showing a mismatch in the expected output with an element that should not be there. If the netlink dump happens before GC worker run, it might show dead elements in the ruleset listing. nft_rhash_get() already skips dead elements in nft_rhash_cmp(), therefore, it already does not show the element when getting a single element via netlink control plane. Fixes: 5f68718b34a5 ("netfilter: nf_tables: GC transaction API to avoid race with control plane") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 009cb23bc972..7a1a21cde760 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -5011,7 +5011,7 @@ static int nf_tables_dump_setelem(const struct nft_ctx *ctx, const struct nft_set_ext *ext = nft_set_elem_ext(set, elem->priv); struct nft_set_dump_args *args; - if (nft_set_elem_expired(ext)) + if (nft_set_elem_expired(ext) || nft_set_elem_is_dead(ext)) return 0; args = container_of(iter, struct nft_set_dump_args, iter); From 00a86f81c80e0904a3005ff9e333f4185593b59b Mon Sep 17 00:00:00 2001 From: Pablo Neira Ayuso Date: Mon, 15 Jan 2024 12:50:29 +0100 Subject: [PATCH 273/288] netfilter: nf_tables: reject NFT_SET_CONCAT with not field length description [ Upstream commit 113661e07460a6604aacc8ae1b23695a89e7d4b3 ] It is still possible to set on the NFT_SET_CONCAT flag by specifying a set size and no field description, report EINVAL in such case. Fixes: 1b6345d4160e ("netfilter: nf_tables: check NFT_SET_CONCAT flag if field_count is specified") Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/nf_tables_api.c | 6 +++++- 1 file changed, 5 insertions(+), 1 deletion(-) diff --git a/net/netfilter/nf_tables_api.c b/net/netfilter/nf_tables_api.c index 7a1a21cde760..fca8f9a36063 100644 --- a/net/netfilter/nf_tables_api.c +++ b/net/netfilter/nf_tables_api.c @@ -4466,8 +4466,12 @@ static int nf_tables_newset(struct net *net, struct sock *nlsk, if (err < 0) return err; - if (desc.field_count > 1 && !(flags & NFT_SET_CONCAT)) + if (desc.field_count > 1) { + if (!(flags & NFT_SET_CONCAT)) + return -EINVAL; + } else if (flags & NFT_SET_CONCAT) { return -EINVAL; + } } else if (flags & NFT_SET_CONCAT) { return -EINVAL; } From 977c2cf5637afc2649d314b6532d9c0e9eab1d84 Mon Sep 17 00:00:00 2001 From: Fedor Pchelkin Date: Mon, 15 Jan 2024 17:39:22 +0300 Subject: [PATCH 274/288] ipvs: avoid stat macros calls from preemptible context [ Upstream commit d6938c1c76c64f42363d0d1f051e1b4641c2ad40 ] Inside decrement_ttl() upon discovering that the packet ttl has exceeded, __IP_INC_STATS and __IP6_INC_STATS macros can be called from preemptible context having the following backtrace: check_preemption_disabled: 48 callbacks suppressed BUG: using __this_cpu_add() in preemptible [00000000] code: curl/1177 caller is decrement_ttl+0x217/0x830 CPU: 5 PID: 1177 Comm: curl Not tainted 6.7.0+ #34 Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 04/01/2014 Call Trace: dump_stack_lvl+0xbd/0xe0 check_preemption_disabled+0xd1/0xe0 decrement_ttl+0x217/0x830 __ip_vs_get_out_rt+0x4e0/0x1ef0 ip_vs_nat_xmit+0x205/0xcd0 ip_vs_in_hook+0x9b1/0x26a0 nf_hook_slow+0xc2/0x210 nf_hook+0x1fb/0x770 __ip_local_out+0x33b/0x640 ip_local_out+0x2a/0x490 __ip_queue_xmit+0x990/0x1d10 __tcp_transmit_skb+0x288b/0x3d10 tcp_connect+0x3466/0x5180 tcp_v4_connect+0x1535/0x1bb0 __inet_stream_connect+0x40d/0x1040 inet_stream_connect+0x57/0xa0 __sys_connect_file+0x162/0x1a0 __sys_connect+0x137/0x160 __x64_sys_connect+0x72/0xb0 do_syscall_64+0x6f/0x140 entry_SYSCALL_64_after_hwframe+0x6e/0x76 RIP: 0033:0x7fe6dbbc34e0 Use the corresponding preemption-aware variants: IP_INC_STATS and IP6_INC_STATS. Found by Linux Verification Center (linuxtesting.org). Fixes: 8d8e20e2d7bb ("ipvs: Decrement ttl") Signed-off-by: Fedor Pchelkin Acked-by: Julian Anastasov Acked-by: Simon Horman Signed-off-by: Pablo Neira Ayuso Signed-off-by: Sasha Levin --- net/netfilter/ipvs/ip_vs_xmit.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/net/netfilter/ipvs/ip_vs_xmit.c b/net/netfilter/ipvs/ip_vs_xmit.c index cd2130e98836..c87dbc897002 100644 --- a/net/netfilter/ipvs/ip_vs_xmit.c +++ b/net/netfilter/ipvs/ip_vs_xmit.c @@ -271,7 +271,7 @@ static inline bool decrement_ttl(struct netns_ipvs *ipvs, skb->dev = dst->dev; icmpv6_send(skb, ICMPV6_TIME_EXCEED, ICMPV6_EXC_HOPLIMIT, 0); - __IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS); + IP6_INC_STATS(net, idev, IPSTATS_MIB_INHDRERRORS); return false; } @@ -286,7 +286,7 @@ static inline bool decrement_ttl(struct netns_ipvs *ipvs, { if (ip_hdr(skb)->ttl <= 1) { /* Tell the sender its packet died... */ - __IP_INC_STATS(net, IPSTATS_MIB_INHDRERRORS); + IP_INC_STATS(net, IPSTATS_MIB_INHDRERRORS); icmp_send(skb, ICMP_TIME_EXCEEDED, ICMP_EXC_TTL, 0); return false; } From b44e1aec8038d9007e988f7068f333fa0ad73943 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sat, 25 Nov 2023 13:05:04 +0100 Subject: [PATCH 275/288] kdb: Fix a potential buffer overflow in kdb_local() [ Upstream commit 4f41d30cd6dc865c3cbc1a852372321eba6d4e4c ] When appending "[defcmd]" to 'kdb_prompt_str', the size of the string already in the buffer should be taken into account. An option could be to switch from strncat() to strlcat() which does the correct test to avoid such an overflow. However, this actually looks as dead code, because 'defcmd_in_progress' can't be true here. See a more detailed explanation at [1]. [1]: https://lore.kernel.org/all/CAD=FV=WSh7wKN7Yp-3wWiDgX4E3isQ8uh0LCzTmd1v9Cg9j+nQ@mail.gmail.com/ Fixes: 5d5314d6795f ("kdb: core for kgdb back end (1 of 2)") Signed-off-by: Christophe JAILLET Reviewed-by: Douglas Anderson Signed-off-by: Sasha Levin --- kernel/debug/kdb/kdb_main.c | 2 -- 1 file changed, 2 deletions(-) diff --git a/kernel/debug/kdb/kdb_main.c b/kernel/debug/kdb/kdb_main.c index 4e09fab52faf..c27b3dfa1921 100644 --- a/kernel/debug/kdb/kdb_main.c +++ b/kernel/debug/kdb/kdb_main.c @@ -1364,8 +1364,6 @@ static int kdb_local(kdb_reason_t reason, int error, struct pt_regs *regs, /* PROMPT can only be set if we have MEM_READ permission. */ snprintf(kdb_prompt_str, CMD_BUFLEN, kdbgetenv("PROMPT"), raw_smp_processor_id()); - if (defcmd_in_progress) - strncat(kdb_prompt_str, "[defcmd]", CMD_BUFLEN); /* * Fetch command from keyboard From f90b1cebc442b83ffb6460cd12923a9ee3331522 Mon Sep 17 00:00:00 2001 From: =?UTF-8?q?Ludvig=20P=C3=A4rsson?= Date: Wed, 17 Jan 2024 13:03:14 +0100 Subject: [PATCH 276/288] ethtool: netlink: Add missing ethnl_ops_begin/complete MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit [ Upstream commit f1172f3ee3a98754d95b968968920a7d03fdebcc ] Accessing an ethernet device that is powered off or clock gated might cause the CPU to hang. Add ethnl_ops_begin/complete in ethnl_set_features() to protect against this. Fixes: 0980bfcd6954 ("ethtool: set netdev features with FEATURES_SET request") Signed-off-by: Ludvig Pärsson Link: https://lore.kernel.org/r/20240117-etht2-v2-1-1a96b6e8c650@axis.com Signed-off-by: Paolo Abeni Signed-off-by: Sasha Levin --- net/ethtool/features.c | 9 +++++++-- 1 file changed, 7 insertions(+), 2 deletions(-) diff --git a/net/ethtool/features.c b/net/ethtool/features.c index 1c9f4df273bd..faccab84d865 100644 --- a/net/ethtool/features.c +++ b/net/ethtool/features.c @@ -235,17 +235,20 @@ int ethnl_set_features(struct sk_buff *skb, struct genl_info *info) dev = req_info.dev; rtnl_lock(); + ret = ethnl_ops_begin(dev); + if (ret < 0) + goto out_rtnl; ethnl_features_to_bitmap(old_active, dev->features); ethnl_features_to_bitmap(old_wanted, dev->wanted_features); ret = ethnl_parse_bitset(req_wanted, req_mask, NETDEV_FEATURE_COUNT, tb[ETHTOOL_A_FEATURES_WANTED], netdev_features_strings, info->extack); if (ret < 0) - goto out_rtnl; + goto out_ops; if (ethnl_bitmap_to_features(req_mask) & ~NETIF_F_ETHTOOL_BITS) { GENL_SET_ERR_MSG(info, "attempt to change non-ethtool features"); ret = -EINVAL; - goto out_rtnl; + goto out_ops; } /* set req_wanted bits not in req_mask from old_wanted */ @@ -282,6 +285,8 @@ int ethnl_set_features(struct sk_buff *skb, struct genl_info *info) if (mod) netdev_features_change(dev); +out_ops: + ethnl_ops_complete(dev); out_rtnl: rtnl_unlock(); dev_put(dev); From e8bfdf6301425de9717827f52b7aa19791e7ce2c Mon Sep 17 00:00:00 2001 From: Amit Cohen Date: Wed, 17 Jan 2024 16:04:16 +0100 Subject: [PATCH 277/288] mlxsw: spectrum_acl_erp: Fix error flow of pool allocation failure [ Upstream commit 6d6eeabcfaba2fcadf5443b575789ea606f9de83 ] Lately, a bug was found when many TC filters are added - at some point, several bugs are printed to dmesg [1] and the switch is crashed with segmentation fault. The issue starts when gen_pool_free() fails because of unexpected behavior - a try to free memory which is already freed, this leads to BUG() call which crashes the switch and makes many other bugs. Trying to track down the unexpected behavior led to a bug in eRP code. The function mlxsw_sp_acl_erp_table_alloc() gets a pointer to the allocated index, sets the value and returns an error code. When gen_pool_alloc() fails it returns address 0, we track it and return -ENOBUFS outside, BUT the call for gen_pool_alloc() already override the index in erp_table structure. This is a problem when such allocation is done as part of table expansion. This is not a new table, which will not be used in case of allocation failure. We try to expand eRP table and override the current index (non-zero) with zero. Then, it leads to an unexpected behavior when address 0 is freed twice. Note that address 0 is valid in erp_table->base_index and indeed other tables use it. gen_pool_alloc() fails in case that there is no space left in the pre-allocated pool, in our case, the pool is limited to ACL_MAX_ERPT_BANK_SIZE, which is read from hardware. When more than max erp entries are required, we exceed the limit and return an error, this error leads to "Failed to migrate vregion" print. Fix this by changing erp_table->base_index only in case of a successful allocation. Add a test case for such a scenario. Without this fix it causes segmentation fault: $ TESTS="max_erp_entries_test" ./tc_flower.sh ./tc_flower.sh: line 988: 1560 Segmentation fault tc filter del dev $h2 ingress chain $i protocol ip pref $i handle $j flower &>/dev/null [1]: kernel BUG at lib/genalloc.c:508! invalid opcode: 0000 [#1] PREEMPT SMP CPU: 6 PID: 3531 Comm: tc Not tainted 6.7.0-rc5-custom-ga6893f479f5e #1 Hardware name: Mellanox Technologies Ltd. MSN4700/VMOD0010, BIOS 5.11 07/12/2021 RIP: 0010:gen_pool_free_owner+0xc9/0xe0 ... Call Trace: __mlxsw_sp_acl_erp_table_other_dec+0x70/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_erp_mask_destroy+0xf5/0x110 [mlxsw_spectrum] objagg_obj_root_destroy+0x18/0x80 [objagg] objagg_obj_destroy+0x12c/0x130 [objagg] mlxsw_sp_acl_erp_mask_put+0x37/0x50 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_region_entry_remove+0x74/0xa0 [mlxsw_spectrum] mlxsw_sp_acl_ctcam_entry_del+0x1e/0x40 [mlxsw_spectrum] mlxsw_sp_acl_tcam_ventry_del+0x78/0xd0 [mlxsw_spectrum] mlxsw_sp_flower_destroy+0x4d/0x70 [mlxsw_spectrum] mlxsw_sp_flow_block_cb+0x73/0xb0 [mlxsw_spectrum] tc_setup_cb_destroy+0xc1/0x180 fl_hw_destroy_filter+0x94/0xc0 [cls_flower] __fl_delete+0x1ac/0x1c0 [cls_flower] fl_destroy+0xc2/0x150 [cls_flower] tcf_proto_destroy+0x1a/0xa0 ... mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion mlxsw_spectrum3 0000:07:00.0: Failed to migrate vregion Fixes: f465261aa105 ("mlxsw: spectrum_acl: Implement common eRP core") Signed-off-by: Amit Cohen Signed-off-by: Ido Schimmel Signed-off-by: Petr Machata Acked-by: Paolo Abeni Link: https://lore.kernel.org/r/4cfca254dfc0e5d283974801a24371c7b6db5989.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- .../mellanox/mlxsw/spectrum_acl_erp.c | 8 +-- .../drivers/net/mlxsw/spectrum-2/tc_flower.sh | 52 ++++++++++++++++++- 2 files changed, 56 insertions(+), 4 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c index 4c98950380d5..d231f4d2888b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_erp.c @@ -301,6 +301,7 @@ mlxsw_sp_acl_erp_table_alloc(struct mlxsw_sp_acl_erp_core *erp_core, unsigned long *p_index) { unsigned int num_rows, entry_size; + unsigned long index; /* We only allow allocations of entire rows */ if (num_erps % erp_core->num_erp_banks != 0) @@ -309,10 +310,11 @@ mlxsw_sp_acl_erp_table_alloc(struct mlxsw_sp_acl_erp_core *erp_core, entry_size = erp_core->erpt_entries_size[region_type]; num_rows = num_erps / erp_core->num_erp_banks; - *p_index = gen_pool_alloc(erp_core->erp_tables, num_rows * entry_size); - if (*p_index == 0) + index = gen_pool_alloc(erp_core->erp_tables, num_rows * entry_size); + if (!index) return -ENOBUFS; - *p_index -= MLXSW_SP_ACL_ERP_GENALLOC_OFFSET; + + *p_index = index - MLXSW_SP_ACL_ERP_GENALLOC_OFFSET; return 0; } diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh index fb850e0ec837..7bf56ea161e3 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -10,7 +10,8 @@ lib_dir=$(dirname $0)/../../../../net/forwarding ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ multiple_masks_test ctcam_edge_cases_test delta_simple_test \ delta_two_masks_one_key_test delta_simple_rehash_test \ - bloom_simple_test bloom_complex_test bloom_delta_test" + bloom_simple_test bloom_complex_test bloom_delta_test \ + max_erp_entries_test" NUM_NETIFS=2 source $lib_dir/lib.sh source $lib_dir/tc_common.sh @@ -983,6 +984,55 @@ bloom_delta_test() log_test "bloom delta test ($tcflags)" } +max_erp_entries_test() +{ + # The number of eRP entries is limited. Once the maximum number of eRPs + # has been reached, filters cannot be added. This test verifies that + # when this limit is reached, inserstion fails without crashing. + + RET=0 + + local num_masks=32 + local num_regions=15 + local chain_failed + local mask_failed + local ret + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + for ((i=1; i < $num_regions; i++)); do + for ((j=$num_masks; j >= 0; j--)); do + tc filter add dev $h2 ingress chain $i protocol ip \ + pref $i handle $j flower $tcflags \ + dst_ip 192.1.0.0/$j &> /dev/null + ret=$? + + if [ $ret -ne 0 ]; then + chain_failed=$i + mask_failed=$j + break 2 + fi + done + done + + # We expect to exceed the maximum number of eRP entries, so that + # insertion eventually fails. Otherwise, the test should be adjusted to + # add more filters. + check_fail $ret "expected to exceed number of eRP entries" + + for ((; i >= 1; i--)); do + for ((j=0; j <= $num_masks; j++)); do + tc filter del dev $h2 ingress chain $i protocol ip \ + pref $i handle $j flower &> /dev/null + done + done + + log_test "max eRP entries test ($tcflags). " \ + "max chain $chain_failed, mask $mask_failed" +} + setup_prepare() { h1=${NETIFS[p1]} From 936d06d699c325dfeb034ee5222f2c88f551fd06 Mon Sep 17 00:00:00 2001 From: Christophe JAILLET Date: Sun, 24 Oct 2021 21:17:51 +0200 Subject: [PATCH 278/288] mlxsw: spectrum: Use 'bitmap_zalloc()' when applicable [ Upstream commit 2c087dfcc9d5e7e8557d217f01f58ba42d1ddbf1 ] Use 'bitmap_zalloc()' to simplify code, improve the semantic and avoid some open-coded arithmetic in allocator arguments. Also change the corresponding 'kfree()' into 'bitmap_free()' to keep consistency. Signed-off-by: Christophe JAILLET Reviewed-by: Ido Schimmel Signed-off-by: David S. Miller Stable-dep-of: 483ae90d8f97 ("mlxsw: spectrum_acl_tcam: Fix stack corruption") Signed-off-by: Sasha Levin --- .../ethernet/mellanox/mlxsw/spectrum_acl_atcam.c | 8 +++----- .../ethernet/mellanox/mlxsw/spectrum_acl_tcam.c | 15 ++++++--------- .../net/ethernet/mellanox/mlxsw/spectrum_cnt.c | 9 +++------ .../ethernet/mellanox/mlxsw/spectrum_switchdev.c | 11 ++++------- 4 files changed, 16 insertions(+), 27 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_atcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_atcam.c index ded4cf658680..4b713832fdd5 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_atcam.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_atcam.c @@ -119,7 +119,6 @@ mlxsw_sp_acl_atcam_region_12kb_init(struct mlxsw_sp_acl_atcam_region *aregion) { struct mlxsw_sp *mlxsw_sp = aregion->region->mlxsw_sp; struct mlxsw_sp_acl_atcam_region_12kb *region_12kb; - size_t alloc_size; u64 max_lkey_id; int err; @@ -131,8 +130,7 @@ mlxsw_sp_acl_atcam_region_12kb_init(struct mlxsw_sp_acl_atcam_region *aregion) if (!region_12kb) return -ENOMEM; - alloc_size = BITS_TO_LONGS(max_lkey_id) * sizeof(unsigned long); - region_12kb->used_lkey_id = kzalloc(alloc_size, GFP_KERNEL); + region_12kb->used_lkey_id = bitmap_zalloc(max_lkey_id, GFP_KERNEL); if (!region_12kb->used_lkey_id) { err = -ENOMEM; goto err_used_lkey_id_alloc; @@ -149,7 +147,7 @@ mlxsw_sp_acl_atcam_region_12kb_init(struct mlxsw_sp_acl_atcam_region *aregion) return 0; err_rhashtable_init: - kfree(region_12kb->used_lkey_id); + bitmap_free(region_12kb->used_lkey_id); err_used_lkey_id_alloc: kfree(region_12kb); return err; @@ -161,7 +159,7 @@ mlxsw_sp_acl_atcam_region_12kb_fini(struct mlxsw_sp_acl_atcam_region *aregion) struct mlxsw_sp_acl_atcam_region_12kb *region_12kb = aregion->priv; rhashtable_destroy(®ion_12kb->lkey_ht); - kfree(region_12kb->used_lkey_id); + bitmap_free(region_12kb->used_lkey_id); kfree(region_12kb); } diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c index 7cccc41dd69c..31f7f4c3acc3 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c @@ -36,7 +36,6 @@ int mlxsw_sp_acl_tcam_init(struct mlxsw_sp *mlxsw_sp, u64 max_tcam_regions; u64 max_regions; u64 max_groups; - size_t alloc_size; int err; mutex_init(&tcam->lock); @@ -52,15 +51,13 @@ int mlxsw_sp_acl_tcam_init(struct mlxsw_sp *mlxsw_sp, if (max_tcam_regions < max_regions) max_regions = max_tcam_regions; - alloc_size = sizeof(tcam->used_regions[0]) * BITS_TO_LONGS(max_regions); - tcam->used_regions = kzalloc(alloc_size, GFP_KERNEL); + tcam->used_regions = bitmap_zalloc(max_regions, GFP_KERNEL); if (!tcam->used_regions) return -ENOMEM; tcam->max_regions = max_regions; max_groups = MLXSW_CORE_RES_GET(mlxsw_sp->core, ACL_MAX_GROUPS); - alloc_size = sizeof(tcam->used_groups[0]) * BITS_TO_LONGS(max_groups); - tcam->used_groups = kzalloc(alloc_size, GFP_KERNEL); + tcam->used_groups = bitmap_zalloc(max_groups, GFP_KERNEL); if (!tcam->used_groups) { err = -ENOMEM; goto err_alloc_used_groups; @@ -76,9 +73,9 @@ int mlxsw_sp_acl_tcam_init(struct mlxsw_sp *mlxsw_sp, return 0; err_tcam_init: - kfree(tcam->used_groups); + bitmap_free(tcam->used_groups); err_alloc_used_groups: - kfree(tcam->used_regions); + bitmap_free(tcam->used_regions); return err; } @@ -89,8 +86,8 @@ void mlxsw_sp_acl_tcam_fini(struct mlxsw_sp *mlxsw_sp, mutex_destroy(&tcam->lock); ops->fini(mlxsw_sp, tcam->priv); - kfree(tcam->used_groups); - kfree(tcam->used_regions); + bitmap_free(tcam->used_groups); + bitmap_free(tcam->used_regions); } int mlxsw_sp_acl_tcam_priority_get(struct mlxsw_sp *mlxsw_sp, diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.c index b65b93a2b9bc..fc2257753b9b 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_cnt.c @@ -122,7 +122,6 @@ int mlxsw_sp_counter_pool_init(struct mlxsw_sp *mlxsw_sp) unsigned int sub_pools_count = ARRAY_SIZE(mlxsw_sp_counter_sub_pools); struct devlink *devlink = priv_to_devlink(mlxsw_sp->core); struct mlxsw_sp_counter_pool *pool; - unsigned int map_size; int err; pool = kzalloc(struct_size(pool, sub_pools, sub_pools_count), @@ -143,9 +142,7 @@ int mlxsw_sp_counter_pool_init(struct mlxsw_sp *mlxsw_sp) devlink_resource_occ_get_register(devlink, MLXSW_SP_RESOURCE_COUNTERS, mlxsw_sp_counter_pool_occ_get, pool); - map_size = BITS_TO_LONGS(pool->pool_size) * sizeof(unsigned long); - - pool->usage = kzalloc(map_size, GFP_KERNEL); + pool->usage = bitmap_zalloc(pool->pool_size, GFP_KERNEL); if (!pool->usage) { err = -ENOMEM; goto err_usage_alloc; @@ -158,7 +155,7 @@ int mlxsw_sp_counter_pool_init(struct mlxsw_sp *mlxsw_sp) return 0; err_sub_pools_init: - kfree(pool->usage); + bitmap_free(pool->usage); err_usage_alloc: devlink_resource_occ_get_unregister(devlink, MLXSW_SP_RESOURCE_COUNTERS); @@ -176,7 +173,7 @@ void mlxsw_sp_counter_pool_fini(struct mlxsw_sp *mlxsw_sp) WARN_ON(find_first_bit(pool->usage, pool->pool_size) != pool->pool_size); WARN_ON(atomic_read(&pool->active_entries_count)); - kfree(pool->usage); + bitmap_free(pool->usage); devlink_resource_occ_get_unregister(devlink, MLXSW_SP_RESOURCE_COUNTERS); kfree(pool); diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c index 368fa0e5ad31..ea37f5000caa 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_switchdev.c @@ -1631,16 +1631,13 @@ mlxsw_sp_mid *__mlxsw_sp_mc_alloc(struct mlxsw_sp *mlxsw_sp, u16 fid) { struct mlxsw_sp_mid *mid; - size_t alloc_size; mid = kzalloc(sizeof(*mid), GFP_KERNEL); if (!mid) return NULL; - alloc_size = sizeof(unsigned long) * - BITS_TO_LONGS(mlxsw_core_max_ports(mlxsw_sp->core)); - - mid->ports_in_mid = kzalloc(alloc_size, GFP_KERNEL); + mid->ports_in_mid = bitmap_zalloc(mlxsw_core_max_ports(mlxsw_sp->core), + GFP_KERNEL); if (!mid->ports_in_mid) goto err_ports_in_mid_alloc; @@ -1659,7 +1656,7 @@ mlxsw_sp_mid *__mlxsw_sp_mc_alloc(struct mlxsw_sp *mlxsw_sp, return mid; err_write_mdb_entry: - kfree(mid->ports_in_mid); + bitmap_free(mid->ports_in_mid); err_ports_in_mid_alloc: kfree(mid); return NULL; @@ -1676,7 +1673,7 @@ static int mlxsw_sp_port_remove_from_mid(struct mlxsw_sp_port *mlxsw_sp_port, mlxsw_core_max_ports(mlxsw_sp->core))) { err = mlxsw_sp_mc_remove_mdb_entry(mlxsw_sp, mid); list_del(&mid->list); - kfree(mid->ports_in_mid); + bitmap_free(mid->ports_in_mid); kfree(mid); } return err; From a557dbda6407b3818a0f7b681fc7dcf7540dd0d9 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 6 Feb 2023 16:39:19 +0100 Subject: [PATCH 279/288] mlxsw: spectrum_acl_tcam: Add missing mutex_destroy() [ Upstream commit 65823e07b1e4055b6278725fd92f4d7e6f8d53fd ] Pair mutex_init() with a mutex_destroy() in the error path. Found during code review. No functional changes. Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: Petr Machata Reviewed-by: Jacob Keller Signed-off-by: Jakub Kicinski Stable-dep-of: 483ae90d8f97 ("mlxsw: spectrum_acl_tcam: Fix stack corruption") Signed-off-by: Sasha Levin --- drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c | 8 ++++++-- 1 file changed, 6 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c index 31f7f4c3acc3..c8d9f523242e 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c @@ -52,8 +52,10 @@ int mlxsw_sp_acl_tcam_init(struct mlxsw_sp *mlxsw_sp, max_regions = max_tcam_regions; tcam->used_regions = bitmap_zalloc(max_regions, GFP_KERNEL); - if (!tcam->used_regions) - return -ENOMEM; + if (!tcam->used_regions) { + err = -ENOMEM; + goto err_alloc_used_regions; + } tcam->max_regions = max_regions; max_groups = MLXSW_CORE_RES_GET(mlxsw_sp->core, ACL_MAX_GROUPS); @@ -76,6 +78,8 @@ int mlxsw_sp_acl_tcam_init(struct mlxsw_sp *mlxsw_sp, bitmap_free(tcam->used_groups); err_alloc_used_groups: bitmap_free(tcam->used_regions); +err_alloc_used_regions: + mutex_destroy(&tcam->lock); return err; } From d3669ebc4c2a7ede3d9901ba5bee8b806eea98de Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 6 Feb 2023 16:39:20 +0100 Subject: [PATCH 280/288] mlxsw: spectrum_acl_tcam: Make fini symmetric to init [ Upstream commit 61fe3b9102ac84ba479ab84d8f5454af2e21e468 ] Move mutex_destroy() to the end to make the function symmetric with mlxsw_sp_acl_tcam_init(). No functional changes. Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: Petr Machata Reviewed-by: Jacob Keller Signed-off-by: Jakub Kicinski Stable-dep-of: 483ae90d8f97 ("mlxsw: spectrum_acl_tcam: Fix stack corruption") Signed-off-by: Sasha Levin --- drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c index c8d9f523242e..08d91bfa7b39 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c @@ -88,10 +88,10 @@ void mlxsw_sp_acl_tcam_fini(struct mlxsw_sp *mlxsw_sp, { const struct mlxsw_sp_acl_tcam_ops *ops = mlxsw_sp->acl_tcam_ops; - mutex_destroy(&tcam->lock); ops->fini(mlxsw_sp, tcam->priv); bitmap_free(tcam->used_groups); bitmap_free(tcam->used_regions); + mutex_destroy(&tcam->lock); } int mlxsw_sp_acl_tcam_priority_get(struct mlxsw_sp *mlxsw_sp, From a9b233b287aa44be00e7278b7c38d098bc0f1604 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Mon, 6 Feb 2023 16:39:21 +0100 Subject: [PATCH 281/288] mlxsw: spectrum_acl_tcam: Reorder functions to avoid forward declarations [ Upstream commit 194ab9476089bbfc021073214e071a404e375ee6 ] Move the initialization and de-initialization code further below in order to avoid forward declarations in the next patch. No functional changes. Signed-off-by: Ido Schimmel Reviewed-by: Jiri Pirko Signed-off-by: Petr Machata Reviewed-by: Jacob Keller Signed-off-by: Jakub Kicinski Stable-dep-of: 483ae90d8f97 ("mlxsw: spectrum_acl_tcam: Fix stack corruption") Signed-off-by: Sasha Levin --- .../mellanox/mlxsw/spectrum_acl_tcam.c | 130 +++++++++--------- 1 file changed, 65 insertions(+), 65 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c index 08d91bfa7b39..ab897b8be39f 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c @@ -29,71 +29,6 @@ size_t mlxsw_sp_acl_tcam_priv_size(struct mlxsw_sp *mlxsw_sp) #define MLXSW_SP_ACL_TCAM_VREGION_REHASH_INTRVL_MIN 3000 /* ms */ #define MLXSW_SP_ACL_TCAM_VREGION_REHASH_CREDITS 100 /* number of entries */ -int mlxsw_sp_acl_tcam_init(struct mlxsw_sp *mlxsw_sp, - struct mlxsw_sp_acl_tcam *tcam) -{ - const struct mlxsw_sp_acl_tcam_ops *ops = mlxsw_sp->acl_tcam_ops; - u64 max_tcam_regions; - u64 max_regions; - u64 max_groups; - int err; - - mutex_init(&tcam->lock); - tcam->vregion_rehash_intrvl = - MLXSW_SP_ACL_TCAM_VREGION_REHASH_INTRVL_DFLT; - INIT_LIST_HEAD(&tcam->vregion_list); - - max_tcam_regions = MLXSW_CORE_RES_GET(mlxsw_sp->core, - ACL_MAX_TCAM_REGIONS); - max_regions = MLXSW_CORE_RES_GET(mlxsw_sp->core, ACL_MAX_REGIONS); - - /* Use 1:1 mapping between ACL region and TCAM region */ - if (max_tcam_regions < max_regions) - max_regions = max_tcam_regions; - - tcam->used_regions = bitmap_zalloc(max_regions, GFP_KERNEL); - if (!tcam->used_regions) { - err = -ENOMEM; - goto err_alloc_used_regions; - } - tcam->max_regions = max_regions; - - max_groups = MLXSW_CORE_RES_GET(mlxsw_sp->core, ACL_MAX_GROUPS); - tcam->used_groups = bitmap_zalloc(max_groups, GFP_KERNEL); - if (!tcam->used_groups) { - err = -ENOMEM; - goto err_alloc_used_groups; - } - tcam->max_groups = max_groups; - tcam->max_group_size = MLXSW_CORE_RES_GET(mlxsw_sp->core, - ACL_MAX_GROUP_SIZE); - - err = ops->init(mlxsw_sp, tcam->priv, tcam); - if (err) - goto err_tcam_init; - - return 0; - -err_tcam_init: - bitmap_free(tcam->used_groups); -err_alloc_used_groups: - bitmap_free(tcam->used_regions); -err_alloc_used_regions: - mutex_destroy(&tcam->lock); - return err; -} - -void mlxsw_sp_acl_tcam_fini(struct mlxsw_sp *mlxsw_sp, - struct mlxsw_sp_acl_tcam *tcam) -{ - const struct mlxsw_sp_acl_tcam_ops *ops = mlxsw_sp->acl_tcam_ops; - - ops->fini(mlxsw_sp, tcam->priv); - bitmap_free(tcam->used_groups); - bitmap_free(tcam->used_regions); - mutex_destroy(&tcam->lock); -} - int mlxsw_sp_acl_tcam_priority_get(struct mlxsw_sp *mlxsw_sp, struct mlxsw_sp_acl_rule_info *rulei, u32 *priority, bool fillup_priority) @@ -1546,6 +1481,71 @@ mlxsw_sp_acl_tcam_vregion_rehash(struct mlxsw_sp *mlxsw_sp, mlxsw_sp_acl_tcam_vregion_rehash_end(mlxsw_sp, vregion, ctx); } +int mlxsw_sp_acl_tcam_init(struct mlxsw_sp *mlxsw_sp, + struct mlxsw_sp_acl_tcam *tcam) +{ + const struct mlxsw_sp_acl_tcam_ops *ops = mlxsw_sp->acl_tcam_ops; + u64 max_tcam_regions; + u64 max_regions; + u64 max_groups; + int err; + + mutex_init(&tcam->lock); + tcam->vregion_rehash_intrvl = + MLXSW_SP_ACL_TCAM_VREGION_REHASH_INTRVL_DFLT; + INIT_LIST_HEAD(&tcam->vregion_list); + + max_tcam_regions = MLXSW_CORE_RES_GET(mlxsw_sp->core, + ACL_MAX_TCAM_REGIONS); + max_regions = MLXSW_CORE_RES_GET(mlxsw_sp->core, ACL_MAX_REGIONS); + + /* Use 1:1 mapping between ACL region and TCAM region */ + if (max_tcam_regions < max_regions) + max_regions = max_tcam_regions; + + tcam->used_regions = bitmap_zalloc(max_regions, GFP_KERNEL); + if (!tcam->used_regions) { + err = -ENOMEM; + goto err_alloc_used_regions; + } + tcam->max_regions = max_regions; + + max_groups = MLXSW_CORE_RES_GET(mlxsw_sp->core, ACL_MAX_GROUPS); + tcam->used_groups = bitmap_zalloc(max_groups, GFP_KERNEL); + if (!tcam->used_groups) { + err = -ENOMEM; + goto err_alloc_used_groups; + } + tcam->max_groups = max_groups; + tcam->max_group_size = MLXSW_CORE_RES_GET(mlxsw_sp->core, + ACL_MAX_GROUP_SIZE); + + err = ops->init(mlxsw_sp, tcam->priv, tcam); + if (err) + goto err_tcam_init; + + return 0; + +err_tcam_init: + bitmap_free(tcam->used_groups); +err_alloc_used_groups: + bitmap_free(tcam->used_regions); +err_alloc_used_regions: + mutex_destroy(&tcam->lock); + return err; +} + +void mlxsw_sp_acl_tcam_fini(struct mlxsw_sp *mlxsw_sp, + struct mlxsw_sp_acl_tcam *tcam) +{ + const struct mlxsw_sp_acl_tcam_ops *ops = mlxsw_sp->acl_tcam_ops; + + ops->fini(mlxsw_sp, tcam->priv); + bitmap_free(tcam->used_groups); + bitmap_free(tcam->used_regions); + mutex_destroy(&tcam->lock); +} + static const enum mlxsw_afk_element mlxsw_sp_acl_tcam_pattern_ipv4[] = { MLXSW_AFK_ELEMENT_SRC_SYS_PORT, MLXSW_AFK_ELEMENT_DMAC_32_47, From 56750ea5d15426b5f307554e7699e8b5f76c3182 Mon Sep 17 00:00:00 2001 From: Ido Schimmel Date: Wed, 17 Jan 2024 16:04:18 +0100 Subject: [PATCH 282/288] mlxsw: spectrum_acl_tcam: Fix stack corruption [ Upstream commit 483ae90d8f976f8339cf81066312e1329f2d3706 ] When tc filters are first added to a net device, the corresponding local port gets bound to an ACL group in the device. The group contains a list of ACLs. In turn, each ACL points to a different TCAM region where the filters are stored. During forwarding, the ACLs are sequentially evaluated until a match is found. One reason to place filters in different regions is when they are added with decreasing priorities and in an alternating order so that two consecutive filters can never fit in the same region because of their key usage. In Spectrum-2 and newer ASICs the firmware started to report that the maximum number of ACLs in a group is more than 16, but the layout of the register that configures ACL groups (PAGT) was not updated to account for that. It is therefore possible to hit stack corruption [1] in the rare case where more than 16 ACLs in a group are required. Fix by limiting the maximum ACL group size to the minimum between what the firmware reports and the maximum ACLs that fit in the PAGT register. Add a test case to make sure the machine does not crash when this condition is hit. [1] Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: mlxsw_sp_acl_tcam_group_update+0x116/0x120 [...] dump_stack_lvl+0x36/0x50 panic+0x305/0x330 __stack_chk_fail+0x15/0x20 mlxsw_sp_acl_tcam_group_update+0x116/0x120 mlxsw_sp_acl_tcam_group_region_attach+0x69/0x110 mlxsw_sp_acl_tcam_vchunk_get+0x492/0xa20 mlxsw_sp_acl_tcam_ventry_add+0x25/0xe0 mlxsw_sp_acl_rule_add+0x47/0x240 mlxsw_sp_flower_replace+0x1a9/0x1d0 tc_setup_cb_add+0xdc/0x1c0 fl_hw_replace_filter+0x146/0x1f0 fl_change+0xc17/0x1360 tc_new_tfilter+0x472/0xb90 rtnetlink_rcv_msg+0x313/0x3b0 netlink_rcv_skb+0x58/0x100 netlink_unicast+0x244/0x390 netlink_sendmsg+0x1e4/0x440 ____sys_sendmsg+0x164/0x260 ___sys_sendmsg+0x9a/0xe0 __sys_sendmsg+0x7a/0xc0 do_syscall_64+0x40/0xe0 entry_SYSCALL_64_after_hwframe+0x63/0x6b Fixes: c3ab435466d5 ("mlxsw: spectrum: Extend to support Spectrum-2 ASIC") Reported-by: Orel Hagag Signed-off-by: Ido Schimmel Reviewed-by: Amit Cohen Signed-off-by: Petr Machata Acked-by: Paolo Abeni Link: https://lore.kernel.org/r/2d91c89afba59c22587b444994ae419dbea8d876.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- .../mellanox/mlxsw/spectrum_acl_tcam.c | 2 + .../drivers/net/mlxsw/spectrum-2/tc_flower.sh | 56 ++++++++++++++++++- 2 files changed, 57 insertions(+), 1 deletion(-) diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c index ab897b8be39f..483c8b75bebb 100644 --- a/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c +++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum_acl_tcam.c @@ -1519,6 +1519,8 @@ int mlxsw_sp_acl_tcam_init(struct mlxsw_sp *mlxsw_sp, tcam->max_groups = max_groups; tcam->max_group_size = MLXSW_CORE_RES_GET(mlxsw_sp->core, ACL_MAX_GROUP_SIZE); + tcam->max_group_size = min_t(unsigned int, tcam->max_group_size, + MLXSW_REG_PAGT_ACL_MAX_NUM); err = ops->init(mlxsw_sp, tcam->priv, tcam); if (err) diff --git a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh index 7bf56ea161e3..616d3581419c 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/spectrum-2/tc_flower.sh @@ -11,7 +11,7 @@ ALL_TESTS="single_mask_test identical_filters_test two_masks_test \ multiple_masks_test ctcam_edge_cases_test delta_simple_test \ delta_two_masks_one_key_test delta_simple_rehash_test \ bloom_simple_test bloom_complex_test bloom_delta_test \ - max_erp_entries_test" + max_erp_entries_test max_group_size_test" NUM_NETIFS=2 source $lib_dir/lib.sh source $lib_dir/tc_common.sh @@ -1033,6 +1033,60 @@ max_erp_entries_test() "max chain $chain_failed, mask $mask_failed" } +max_group_size_test() +{ + # The number of ACLs in an ACL group is limited. Once the maximum + # number of ACLs has been reached, filters cannot be added. This test + # verifies that when this limit is reached, insertion fails without + # crashing. + + RET=0 + + local num_acls=32 + local max_size + local ret + + if [[ "$tcflags" != "skip_sw" ]]; then + return 0; + fi + + for ((i=1; i < $num_acls; i++)); do + if [[ $(( i % 2 )) == 1 ]]; then + tc filter add dev $h2 ingress pref $i proto ipv4 \ + flower $tcflags dst_ip 198.51.100.1/32 \ + ip_proto tcp tcp_flags 0x01/0x01 \ + action drop &> /dev/null + else + tc filter add dev $h2 ingress pref $i proto ipv6 \ + flower $tcflags dst_ip 2001:db8:1::1/128 \ + action drop &> /dev/null + fi + + ret=$? + [[ $ret -ne 0 ]] && max_size=$((i - 1)) && break + done + + # We expect to exceed the maximum number of ACLs in a group, so that + # insertion eventually fails. Otherwise, the test should be adjusted to + # add more filters. + check_fail $ret "expected to exceed number of ACLs in a group" + + for ((; i >= 1; i--)); do + if [[ $(( i % 2 )) == 1 ]]; then + tc filter del dev $h2 ingress pref $i proto ipv4 \ + flower $tcflags dst_ip 198.51.100.1/32 \ + ip_proto tcp tcp_flags 0x01/0x01 \ + action drop &> /dev/null + else + tc filter del dev $h2 ingress pref $i proto ipv6 \ + flower $tcflags dst_ip 2001:db8:1::1/128 \ + action drop &> /dev/null + fi + done + + log_test "max ACL group size test ($tcflags). max size $max_size" +} + setup_prepare() { h1=${NETIFS[p1]} From 3e1ca8065926cfd274c950d050e275ee36d6896a Mon Sep 17 00:00:00 2001 From: Petr Machata Date: Mon, 17 May 2021 20:03:54 +0300 Subject: [PATCH 283/288] selftests: mlxsw: qos_pfc: Convert to iproute2 dcb [ Upstream commit b0bab2298ec9b3a837f8ef4a0cae4b42a4d03365 ] There is a dedicated tool for configuration of DCB in iproute2 now. Use it in the selftest instead of mlnx_qos. Signed-off-by: Petr Machata Signed-off-by: Ido Schimmel Signed-off-by: David S. Miller Stable-dep-of: b34f4de6d30c ("selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes") Signed-off-by: Sasha Levin --- .../selftests/drivers/net/mlxsw/qos_pfc.sh | 24 +++++++++---------- 1 file changed, 12 insertions(+), 12 deletions(-) diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh index 5c7700212f75..5d5622fc2758 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh @@ -171,7 +171,7 @@ switch_create() # assignment. tc qdisc replace dev $swp1 root handle 1: \ ets bands 8 strict 8 priomap 7 6 - __mlnx_qos -i $swp1 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null + dcb buffer set dev $swp1 prio-buffer all:0 1:1 # $swp2 # ----- @@ -209,8 +209,8 @@ switch_create() # the lossless prio into a buffer of its own. Don't bother with buffer # sizes though, there is not going to be any pressure in the "backward" # direction. - __mlnx_qos -i $swp3 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null - __mlnx_qos -i $swp3 --pfc=0,1,0,0,0,0,0,0 >/dev/null + dcb buffer set dev $swp3 prio-buffer all:0 1:1 + dcb pfc set dev $swp3 prio-pfc all:off 1:on # $swp4 # ----- @@ -226,11 +226,11 @@ switch_create() # Configure qdisc so that we can hand-tune headroom. tc qdisc replace dev $swp4 root handle 1: \ ets bands 8 strict 8 priomap 7 6 - __mlnx_qos -i $swp4 --prio2buffer=0,1,0,0,0,0,0,0 >/dev/null - __mlnx_qos -i $swp4 --pfc=0,1,0,0,0,0,0,0 >/dev/null + dcb buffer set dev $swp4 prio-buffer all:0 1:1 + dcb pfc set dev $swp4 prio-pfc all:off 1:on # PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which # is (-2*MTU) about 80K of delay provision. - __mlnx_qos -i $swp4 --buffer_size=0,$_100KB,0,0,0,0,0,0 >/dev/null + dcb buffer set dev $swp4 buffer-size all:0 1:$_100KB # bridges # ------- @@ -273,9 +273,9 @@ switch_destroy() # $swp4 # ----- - __mlnx_qos -i $swp4 --buffer_size=0,0,0,0,0,0,0,0 >/dev/null - __mlnx_qos -i $swp4 --pfc=0,0,0,0,0,0,0,0 >/dev/null - __mlnx_qos -i $swp4 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null + dcb buffer set dev $swp4 buffer-size all:0 + dcb pfc set dev $swp4 prio-pfc all:off + dcb buffer set dev $swp4 prio-buffer all:0 tc qdisc del dev $swp4 root devlink_tc_bind_pool_th_restore $swp4 1 ingress @@ -288,8 +288,8 @@ switch_destroy() # $swp3 # ----- - __mlnx_qos -i $swp3 --pfc=0,0,0,0,0,0,0,0 >/dev/null - __mlnx_qos -i $swp3 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null + dcb pfc set dev $swp3 prio-pfc all:off + dcb buffer set dev $swp3 prio-buffer all:0 tc qdisc del dev $swp3 root devlink_tc_bind_pool_th_restore $swp3 1 egress @@ -315,7 +315,7 @@ switch_destroy() # $swp1 # ----- - __mlnx_qos -i $swp1 --prio2buffer=0,0,0,0,0,0,0,0 >/dev/null + dcb buffer set dev $swp1 prio-buffer all:0 tc qdisc del dev $swp1 root devlink_tc_bind_pool_th_restore $swp1 1 ingress From 8ba74e90162e2934f380e44ee6b2d73b6f31fb33 Mon Sep 17 00:00:00 2001 From: Amit Cohen Date: Wed, 17 Jan 2024 16:04:21 +0100 Subject: [PATCH 284/288] selftests: mlxsw: qos_pfc: Adjust the test to support 8 lanes [ Upstream commit b34f4de6d30cbaa8fed905a5080b6eace8c84dc7 ] 'qos_pfc' test checks PFC behavior. The idea is to limit the traffic using a shaper somewhere in the flow of the packets. In this area, the buffer is smaller than the buffer at the beginning of the flow, so it fills up until there is no more space left. The test configures there PFC which is supposed to notice that the headroom is filling up and send PFC Xoff to indicate the transmitter to stop sending traffic for the priorities sharing this PG. The Xon/Xoff threshold is auto-configured and always equal to 2*(MTU rounded up to cell size). Even after sending the PFC Xoff packet, traffic will keep arriving until the transmitter receives and processes the PFC packet. This amount of traffic is known as the PFC delay allowance. Currently the buffer for the delay traffic is configured as 100KB. The MTU in the test is 10KB, therefore the threshold for Xoff is about 20KB. This allows 80KB extra to be stored in this buffer. 8-lane ports use two buffers among which the configured buffer is split, the Xoff threshold then applies to each buffer in parallel. The test does not take into account the behavior of 8-lane ports, when the ports are configured to 400Gbps with 8 lanes or 800Gbps with 8 lanes, packets are dropped and the test fails. Check if the relevant ports use 8 lanes, in such case double the size of the buffer, as the headroom is split half-half. Cc: Shuah Khan Fixes: bfa804784e32 ("selftests: mlxsw: Add a PFC test") Signed-off-by: Amit Cohen Reviewed-by: Ido Schimmel Signed-off-by: Petr Machata Acked-by: Paolo Abeni Link: https://lore.kernel.org/r/23ff11b7dff031eb04a41c0f5254a2b636cd8ebb.1705502064.git.petrm@nvidia.com Signed-off-by: Jakub Kicinski Signed-off-by: Sasha Levin --- .../selftests/drivers/net/mlxsw/qos_pfc.sh | 18 +++++++++++++++++- 1 file changed, 17 insertions(+), 1 deletion(-) diff --git a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh index 5d5622fc2758..56761de1ca3b 100755 --- a/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh +++ b/tools/testing/selftests/drivers/net/mlxsw/qos_pfc.sh @@ -121,6 +121,9 @@ h2_destroy() switch_create() { + local lanes_swp4 + local pg1_size + # pools # ----- @@ -230,7 +233,20 @@ switch_create() dcb pfc set dev $swp4 prio-pfc all:off 1:on # PG0 will get autoconfigured to Xoff, give PG1 arbitrarily 100K, which # is (-2*MTU) about 80K of delay provision. - dcb buffer set dev $swp4 buffer-size all:0 1:$_100KB + pg1_size=$_100KB + + setup_wait_dev_with_timeout $swp4 + + lanes_swp4=$(ethtool $swp4 | grep 'Lanes:') + lanes_swp4=${lanes_swp4#*"Lanes: "} + + # 8-lane ports use two buffers among which the configured buffer + # is split, so double the size to get twice (20K + 80K). + if [[ $lanes_swp4 -eq 8 ]]; then + pg1_size=$((pg1_size * 2)) + fi + + dcb buffer set dev $swp4 buffer-size all:0 1:$pg1_size # bridges # ------- From da60686bab6beaa718f14b9964277cd61bb74bbb Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 8 Nov 2023 17:43:52 +0100 Subject: [PATCH 285/288] i2c: s3c24xx: fix read transfers in polling mode [ Upstream commit 0d9cf23ed55d7ba3ab26d617a3ae507863674c8f ] To properly handle read transfers in polling mode, no waiting for the ACK state is needed as it will never come. Just wait a bit to ensure start state is on the bus and continue processing next bytes. Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support") Signed-off-by: Marek Szyprowski Reviewed-by: Chanho Park Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-s3c2410.c | 13 +++++++++++-- 1 file changed, 11 insertions(+), 2 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 05831848b7bf..687588834fc8 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -223,8 +223,17 @@ static bool is_ack(struct s3c24xx_i2c *i2c) int tries; for (tries = 50; tries; --tries) { - if (readl(i2c->regs + S3C2410_IICCON) - & S3C2410_IICCON_IRQPEND) { + unsigned long tmp = readl(i2c->regs + S3C2410_IICCON); + + if (!(tmp & S3C2410_IICCON_ACKEN)) { + /* + * Wait a bit for the bus to stabilize, + * delay estimated experimentally. + */ + usleep_range(100, 200); + return true; + } + if (tmp & S3C2410_IICCON_IRQPEND) { if (!(readl(i2c->regs + S3C2410_IICSTAT) & S3C2410_IICSTAT_LASTBIT)) return true; From 2e23761beb90f6c20b20d5ce22556876584d26d2 Mon Sep 17 00:00:00 2001 From: Marek Szyprowski Date: Wed, 8 Nov 2023 17:43:53 +0100 Subject: [PATCH 286/288] i2c: s3c24xx: fix transferring more than one message in polling mode [ Upstream commit 990489e1042c6c5d6bccf56deca68f8dbeed8180 ] To properly handle ACK on the bus when transferring more than one message in polling mode, move the polling handling loop from s3c24xx_i2c_message_start() to s3c24xx_i2c_doxfer(). This way i2c_s3c_irq_nextbyte() is always executed till the end, properly acknowledging the IRQ bits and no recursive calls to i2c_s3c_irq_nextbyte() are made. While touching this, also fix finishing transfers in polling mode by using common code path and always waiting for the bus to become idle and disabled. Fixes: 117053f77a5a ("i2c: s3c2410: Add polling mode support") Signed-off-by: Marek Szyprowski Reviewed-by: Andi Shyti Signed-off-by: Wolfram Sang Signed-off-by: Sasha Levin --- drivers/i2c/busses/i2c-s3c2410.c | 27 ++++++++++----------------- 1 file changed, 10 insertions(+), 17 deletions(-) diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 687588834fc8..fd0969cd7dc6 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -286,16 +286,6 @@ static void s3c24xx_i2c_message_start(struct s3c24xx_i2c *i2c, stat |= S3C2410_IICSTAT_START; writel(stat, i2c->regs + S3C2410_IICSTAT); - - if (i2c->quirks & QUIRK_POLL) { - while ((i2c->msg_num != 0) && is_ack(i2c)) { - i2c_s3c_irq_nextbyte(i2c, stat); - stat = readl(i2c->regs + S3C2410_IICSTAT); - - if (stat & S3C2410_IICSTAT_ARBITR) - dev_err(i2c->dev, "deal with arbitration loss\n"); - } - } } static inline void s3c24xx_i2c_stop(struct s3c24xx_i2c *i2c, int ret) @@ -702,7 +692,7 @@ static void s3c24xx_i2c_wait_idle(struct s3c24xx_i2c *i2c) static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, struct i2c_msg *msgs, int num) { - unsigned long timeout; + unsigned long timeout = 0; int ret; ret = s3c24xx_i2c_set_master(i2c); @@ -722,16 +712,19 @@ static int s3c24xx_i2c_doxfer(struct s3c24xx_i2c *i2c, s3c24xx_i2c_message_start(i2c, msgs); if (i2c->quirks & QUIRK_POLL) { - ret = i2c->msg_idx; + while ((i2c->msg_num != 0) && is_ack(i2c)) { + unsigned long stat = readl(i2c->regs + S3C2410_IICSTAT); - if (ret != num) - dev_dbg(i2c->dev, "incomplete xfer (%d)\n", ret); + i2c_s3c_irq_nextbyte(i2c, stat); - goto out; + stat = readl(i2c->regs + S3C2410_IICSTAT); + if (stat & S3C2410_IICSTAT_ARBITR) + dev_err(i2c->dev, "deal with arbitration loss\n"); + } + } else { + timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); } - timeout = wait_event_timeout(i2c->wait, i2c->msg_num == 0, HZ * 5); - ret = i2c->msg_idx; /* From 66e4f4a847911bf80411ba50e19821876894210b Mon Sep 17 00:00:00 2001 From: Sjoerd Simons Date: Tue, 28 Nov 2023 22:35:06 +0100 Subject: [PATCH 287/288] arm64: dts: armada-3720-turris-mox: set irq type for RTC MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit commit fca8a117c1c9a0f8b8feed117db34cf58134dc2c upstream. The rtc on the mox shares its interrupt line with the moxtet bus. Set the interrupt type to be consistent between both devices. This ensures correct setup of the interrupt line regardless of probing order. Signed-off-by: Sjoerd Simons Cc: # v6.2+ Fixes: 21aad8ba615e ("arm64: dts: armada-3720-turris-mox: Add missing interrupt for RTC") Reviewed-by: Marek Behún Signed-off-by: Gregory CLEMENT Signed-off-by: Greg Kroah-Hartman --- arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts index eea8d23683dc..39e9b3875761 100644 --- a/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts +++ b/arch/arm64/boot/dts/marvell/armada-3720-turris-mox.dts @@ -129,7 +129,7 @@ rtc@6f { compatible = "microchip,mcp7940x"; reg = <0x6f>; interrupt-parent = <&gpiosb>; - interrupts = <5 0>; /* GPIO2_5 */ + interrupts = <5 IRQ_TYPE_EDGE_FALLING>; /* GPIO2_5 */ }; }; From 16ad71c250c180a095f9d11b02579b81a47aaa84 Mon Sep 17 00:00:00 2001 From: Greg Kroah-Hartman Date: Thu, 25 Jan 2024 14:37:57 -0800 Subject: [PATCH 288/288] Linux 5.10.209 Link: https://lore.kernel.org/r/20240122235732.009174833@linuxfoundation.org Tested-by: Dominique Martinet Tested-by: Salvatore Bonaccorso Tested-by: Florian Fainelli Tested-by: Linux Kernel Functional Testing Signed-off-by: Greg Kroah-Hartman --- Makefile | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/Makefile b/Makefile index a4b42141ba1b..613b25d330b0 100644 --- a/Makefile +++ b/Makefile @@ -1,7 +1,7 @@ # SPDX-License-Identifier: GPL-2.0 VERSION = 5 PATCHLEVEL = 10 -SUBLEVEL = 208 +SUBLEVEL = 209 EXTRAVERSION = NAME = Dare mighty things