Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus

Pull MIPS fixes from Ralf Baechle:
 - BMIPS SMP fixes
 - a build fix necessary for older compilers
 - two more bugs found my Chandras' testing
 - and one more build fix

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: BMIPS: fix slave CPU booting when physical CPU is not 0
  MIPS: BMIPS: do not change interrupt routing depending on boot CPU
  MIPS: powertv: Fix arguments for free_reserved_area()
  MIPS: Set default CPU type for BCM47XX platforms
  MIPS: uapi/asm/siginfo.h: Fix GCC 4.1.2 compilation
  MIPS: Fix multiple definitions of UNCAC_BASE.

arch/mips/Kconfig

@@ -114,6 +114,7 @@ config BCM47XX
 	select FW_CFE
 	select HW_HAS_PCI
 	select IRQ_CPU
+	select SYS_HAS_CPU_MIPS32_R1
 	select NO_EXCEPT_FILL
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN

arch/mips/bcm47xx/Kconfig

@@ -2,7 +2,6 @@ if BCM47XX
 
 config BCM47XX_SSB
 	bool "SSB Support for Broadcom BCM47XX"
-	select SYS_HAS_CPU_MIPS32_R1
 	select SSB
 	select SSB_DRIVER_MIPS
 	select SSB_DRIVER_EXTIF

arch/mips/include/asm/mach-generic/spaces.h

@@ -25,8 +25,12 @@
 #else
 #define CAC_BASE		_AC(0x80000000, UL)
 #endif
+#ifndef IO_BASE
 #define IO_BASE			_AC(0xa0000000, UL)
+#endif
+#ifndef UNCAC_BASE
 #define UNCAC_BASE		_AC(0xa0000000, UL)
+#endif
 
 #ifndef MAP_BASE
 #ifdef CONFIG_KVM_GUEST

arch/mips/include/uapi/asm/siginfo.h

@@ -25,11 +25,12 @@ struct siginfo;
 /*
  * Careful to keep union _sifields from shifting ...
  */
-#if __SIZEOF_LONG__ == 4
+#if _MIPS_SZLONG == 32
 #define __ARCH_SI_PREAMBLE_SIZE (3 * sizeof(int))
-#endif
+#elif _MIPS_SZLONG == 64
-#if __SIZEOF_LONG__ == 8
 #define __ARCH_SI_PREAMBLE_SIZE (4 * sizeof(int))
+#else
+#error _MIPS_SZLONG neither 32 nor 64
 #endif
 
 #include <asm-generic/siginfo.h>

arch/mips/kernel/bmips_vec.S

@@ -54,7 +54,11 @@ LEAF(bmips_smp_movevec)
 	/* set up CPU1 CBR; move BASE to 0xa000_0000 */
 	li	k0, 0xff400000
 	mtc0	k0, $22, 6
-	li	k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_1
+	/* set up relocation vector address based on thread ID */
+	mfc0	k1, $22, 3
+	srl	k1, 16
+	andi	k1, 0x8000
+	or	k1, CKSEG1 | BMIPS_RELO_VECTOR_CONTROL_0
 	or	k0, k1
 	li	k1, 0xa0080000
 	sw	k1, 0(k0)

arch/mips/kernel/smp-bmips.c

@@ -79,15 +79,9 @@ static void __init bmips_smp_setup(void)
 	 * MIPS interrupts 0,1 (SW INT 0,1) cross over to the other thread
 	 * MIPS interrupt 2 (HW INT 0) is the CPU0 L1 controller output
 	 * MIPS interrupt 3 (HW INT 1) is the CPU1 L1 controller output
-	 *
-	 * If booting from TP1, leave the existing CMT interrupt routing
-	 * such that TP0 responds to SW1 and TP1 responds to SW0.
 	 */
-	if (boot_cpu == 0)
+	change_c0_brcm_cmt_intr(0xf8018000,
-		change_c0_brcm_cmt_intr(0xf8018000,
 					(0x02 << 27) | (0x03 << 15));
-	else
-		change_c0_brcm_cmt_intr(0xf8018000, (0x1d << 27));
 
 	/* single core, 2 threads (2 pipelines) */
 	max_cpus = 2;
@@ -202,9 +196,15 @@ static void bmips_init_secondary(void)
 #if defined(CONFIG_CPU_BMIPS4350) || defined(CONFIG_CPU_BMIPS4380)
 	void __iomem *cbr = BMIPS_GET_CBR();
 	unsigned long old_vec;
+	unsigned long relo_vector;
+	int boot_cpu;
 
-	old_vec = __raw_readl(cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+	boot_cpu = !!(read_c0_brcm_cmt_local() & (1 << 31));
-	__raw_writel(old_vec & ~0x20000000, cbr + BMIPS_RELO_VECTOR_CONTROL_1);
+	relo_vector = boot_cpu ? BMIPS_RELO_VECTOR_CONTROL_0 :
+			  BMIPS_RELO_VECTOR_CONTROL_1;
+
+	old_vec = __raw_readl(cbr + relo_vector);
+	__raw_writel(old_vec & ~0x20000000, cbr + relo_vector);
 
 	clear_c0_cause(smp_processor_id() ? C_SW1 : C_SW0);
 #elif defined(CONFIG_CPU_BMIPS5000)

arch/mips/powertv/asic/asic_devices.c

@@ -529,8 +529,7 @@ EXPORT_SYMBOL(asic_resource_get);
  */
 void platform_release_memory(void *ptr, int size)
 {
-	free_reserved_area((unsigned long)ptr, (unsigned long)(ptr + size),
+	free_reserved_area(ptr, ptr + size, -1, NULL);
-			   -1, NULL);
 }
 EXPORT_SYMBOL(platform_release_memory);