blackfin: bf60x: add wakeup source select

Support select the wakeup source for power management on bf60x.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Bob Liu <lliubbo@gmail.com>

arch/blackfin/Kconfig

@@ -1256,7 +1256,7 @@ config ARCH_SUSPEND_POSSIBLE
 
 choice
 	prompt "Standby Power Saving Mode"
-	depends on PM
+	depends on PM && !BF60x
 	default PM_BFIN_SLEEP_DEEPER
 config  PM_BFIN_SLEEP_DEEPER
 	bool "Sleep Deeper"
@@ -1311,6 +1311,118 @@ config PM_BFIN_WAKE_GP
 	  On ADSP-BF549 this option enables the the same functionality on the
 	  /MRXON pin also PH7.
 
+config PM_BFIN_WAKE_PA15
+	bool "Allow Wake-Up from PA15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PA15 Wake-Up
+
+config PM_BFIN_WAKE_PA15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PA15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PB15
+	bool "Allow Wake-Up from PB15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PB15 Wake-Up
+
+config PM_BFIN_WAKE_PB15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PB15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PC15
+	bool "Allow Wake-Up from PC15"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PC15 Wake-Up
+
+config PM_BFIN_WAKE_PC15_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PC15
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PD06
+	bool "Allow Wake-Up from PD06(ETH0_PHYINT)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PD06(ETH0_PHYINT) Wake-up
+
+config PM_BFIN_WAKE_PD06_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PD06
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PE12
+	bool "Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PE12(ETH1_PHYINT, PUSH BUTTON) Wake-up
+
+config PM_BFIN_WAKE_PE12_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PE12
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG04
+	bool "Allow Wake-Up from PG04(CAN0_RX)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PG04(CAN0_RX) Wake-up
+
+config PM_BFIN_WAKE_PG04_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PG04
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_PG13
+	bool "Allow Wake-Up from PG13"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable PG13 Wake-Up
+
+config PM_BFIN_WAKE_PG13_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_PG13
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
+config PM_BFIN_WAKE_USB
+	bool "Allow Wake-Up from (USB)"
+	depends on PM && BF60x
+	default n
+	help
+	  Enable (USB) Wake-up
+
+config PM_BFIN_WAKE_USB_POL
+	int "Wake-up priority"
+	depends on PM_BFIN_WAKE_USB
+	default 0
+	help
+	  Wake-Up priority 0(low) 1(high)
+
 endmenu
 
 menu "CPU Frequency scaling"

arch/blackfin/configs/BF609-EZKIT_defconfig

@@ -33,7 +33,8 @@ CONFIG_CPLB_SWITCH_TAB_L1=y
 CONFIG_NOMMU_INITIAL_TRIM_EXCESS=0
 CONFIG_BINFMT_FLAT=y
 CONFIG_BINFMT_ZFLAT=y
-# CONFIG_SUSPEND is not set
+CONFIG_PM_BFIN_WAKE_PE12=y
+CONFIG_PM_BFIN_WAKE_PE12_POL=1
 CONFIG_CPU_FREQ=y
 CONFIG_CPU_FREQ_GOV_POWERSAVE=y
 CONFIG_CPU_FREQ_GOV_ONDEMAND=y
@@ -119,7 +120,7 @@ CONFIG_SND_SOC_BFIN_EVAL_ADAU1X61=m
 CONFIG_SND_SOC_ALL_CODECS=m
 CONFIG_USB=y
 CONFIG_USB_MUSB_HDRC=y
-CONFIG_USB_MUSB_BLACKFIN=y
+CONFIG_USB_MUSB_BLACKFIN=m
 CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_MUSB_HDRC=y

arch/blackfin/include/asm/dpmc.h

@@ -729,6 +729,16 @@
 #define VLEV_130		0x00F0	/* VLEV = 1.30 V (-5% - +10% Accuracy) */
 #endif
 
+#ifdef CONFIG_BF60x
+#define PA15WE			0x00000001 /* Allow Wake-Up from PA15 */
+#define PB15WE			0x00000002 /* Allow Wake-Up from PB15 */
+#define PC15WE			0x00000004 /* Allow Wake-Up from PC15 */
+#define PD06WE			0x00000008 /* Allow Wake-Up from PD06(ETH0_PHYINT) */
+#define PE12WE			0x00000010 /* Allow Wake-Up from PE12(ETH1_PHYINT, PUSH BUTTON) */
+#define PG04WE			0x00000020 /* Allow Wake-Up from PG04(CAN0_RX) */
+#define PG13WE			0x00000040 /* Allow Wake-Up from PG13 */
+#define USBWE			0x00000080 /* Allow Wake-Up from (USB) */
+#else
 #define WAKE			0x0100	/* Enable RTC/Reset Wakeup From Hibernate */
 #define CANWE			0x0200	/* Enable CAN Wakeup From Hibernate */
 #define PHYWE			0x0400	/* Enable PHY Wakeup From Hibernate */
@@ -744,7 +754,7 @@
 #else
 #define USBWE			0x0800	/* Enable USB Wakeup From Hibernate */
 #endif
-
+#endif
 
 #ifndef __ASSEMBLY__
 

arch/blackfin/mach-bf609/pm.c

@@ -212,6 +212,65 @@ void bfin_hibernate(unsigned long mask)
 void bf609_cpu_pm_enter(suspend_state_t state)
 {
 	int error;
+	unsigned long wakeup = 0;
+	unsigned long wakeup_pol = 0;
+
+#ifdef CONFIG_PM_BFIN_WAKE_PA15
+	wakeup |= PA15WE;
+# if CONFIG_PM_BFIN_WAKE_PA15_POL
+	wakeup_pol |= PA15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PB15
+	wakeup |= PB15WE;
+# if CONFIG_PM_BFIN_WAKE_PA15_POL
+	wakeup_pol |= PB15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PC15
+	wakeup |= PC15WE;
+# if CONFIG_PM_BFIN_WAKE_PC15_POL
+	wakeup_pol |= PC15WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PD06
+	wakeup |= PD06WE;
+# if CONFIG_PM_BFIN_WAKE_PD06_POL
+	wakeup_pol |= PD06WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PE12
+	wakeup |= PE12WE;
+# if CONFIG_PM_BFIN_WAKE_PE12_POL
+	wakeup_pol |= PE12WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PG04
+	wakeup |= PG04WE;
+# if CONFIG_PM_BFIN_WAKE_PG04_POL
+	wakeup_pol |= PG04WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_PG13
+	wakeup |= PG13WE;
+# if CONFIG_PM_BFIN_WAKE_PG13_POL
+	wakeup_pol |= PG13WE;
+# endif
+#endif
+
+#ifdef CONFIG_PM_BFIN_WAKE_USB
+	wakeup |= USBWE;
+# if CONFIG_PM_BFIN_WAKE_USB_POL
+	wakeup_pol |= USBWE;
+# endif
+#endif
+
 	error = irq_set_irq_wake(255, 1);
 	if(error < 0)
 		printk(KERN_DEBUG "Unable to get irq wake\n");
@@ -220,9 +279,9 @@ void bf609_cpu_pm_enter(suspend_state_t state)
 		printk(KERN_DEBUG "Unable to get irq wake\n");
 
 	if (state == PM_SUSPEND_STANDBY)
-		bfin_deepsleep(0xffff);
+		bfin_deepsleep(wakeup);
 	else {
-		bfin_hibernate(0xffff);
+		bfin_hibernate(wakeup);
 	}
 }
 
@@ -263,26 +322,8 @@ static int __init bf609_init_pm(void)
 {
 	int irq;
 	int error;
-	error = gpio_request(GPIO_PG4, "gpiopg4");
-	if (error < 0) {
-		printk(KERN_DEBUG "failed to request GPIO %d, error %d\n",
-				GPIO_PG4, error);
-	}
 
-	irq = gpio_to_irq(GPIO_PG4);
+#if CONFIG_PM_BFIN_WAKE_PE12
-	if (irq < 0) {
-		error = irq;
-		printk(KERN_DEBUG "Unable to get irq number for GPIO %d, error %d\n",
-				GPIO_PG4, error);
-	}
-
-	printk(KERN_DEBUG "%s gpio %d irq %d\n", __func__, GPIO_PG4, irq);
-
-	error = request_irq(irq, test_isr, IRQF_TRIGGER_FALLING | IRQF_NO_SUSPEND, "gpiopg4", NULL);
-	if(error < 0)
-		printk(KERN_DEBUG "Unable to get irq\n");
-
-#if 1
 	irq = gpio_to_irq(GPIO_PE12);
 	if (irq < 0) {
 		error = irq;

arch/blackfin/mach-common/ints-priority.c

@@ -437,7 +437,7 @@ static void bfin_internal_unmask_irq_chip(struct irq_data *d)
 }
 #endif
 
-#ifdef CONFIG_PM
+#if defined(CONFIG_PM) && !defined(CONFIG_BF60x)
 int bfin_internal_set_wake(unsigned int irq, unsigned int state)
 {
 	u32 bank, bit, wakeup = 0;
@@ -496,6 +496,7 @@ static int bfin_internal_set_wake_chip(struct irq_data *d, unsigned int state)
 	return bfin_internal_set_wake(d->irq, state);
 }
 #else
+# define bfin_internal_set_wake(irq, state)
 # define bfin_internal_set_wake_chip NULL
 #endif
 

arch/blackfin/mach-common/pm.c

@@ -153,9 +153,6 @@ int bfin_pm_suspend_mem_enter(void)
 
 #ifndef CONFIG_BF60x
 	wakeup = bfin_read_VR_CTL() & ~FREQ;
-#else
-
-#endif
 	wakeup |= SCKELOW;
 
 #ifdef CONFIG_PM_BFIN_WAKE_PH6
@@ -163,6 +160,7 @@ int bfin_pm_suspend_mem_enter(void)
 #endif
 #ifdef CONFIG_PM_BFIN_WAKE_GP
 	wakeup |= GPWE;
+#endif
 #endif
 
 	ret = blackfin_dma_suspend();