David Cohen d90c338189 pinctrl: baytrail: show output gpio state correctly on Intel Baytrail ...

Even if a gpio pin is set to output, we still need to set INPUT_EN
functionality (by clearing INPUT_EN bit) to be able to read the pin's
level.

E.g. without this change, we'll always read low level state from sysfs.

Cc: <stable@vger.kernel.org> # v3.14+
Cc: Mathias Nyman <mathias.nyman@linux.intel.com>
Signed-off-by: David Cohen <david.a.cohen@linux.intel.com>
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>

2014-10-28 11:16:26 +01:00

..

berlin

pinctrl: berlin: fix the dt_free_map function

2014-09-23 17:01:47 +02:00

freescale

pinctrl: imx: detect uninitialized pins

2014-09-23 11:45:47 +02:00

mvebu

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

nomadik

This is the bulk of GPIO changes for the v3.18 development

2014-10-09 14:58:15 -04:00

qcom

This is the bulk of GPIO changes for the v3.18 development

2014-10-09 14:58:15 -04:00

samsung

This is the bulk of GPIO changes for the v3.18 development

2014-10-09 14:58:15 -04:00

sh-pfc

This is the bulk of pin control changes for the v3.18

2014-10-07 20:56:28 -04:00

sirf

This is the bulk of GPIO changes for the v3.18 development

2014-10-09 14:58:15 -04:00

spear

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

sunxi

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

vt8500

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

core.c

pinctrl: avoid duplicated calling enable_pinmux_setting for a pin

2014-07-11 14:08:26 +02:00

core.h

pinctrl: move subsystem mutex to pinctrl_dev struct

2013-04-26 17:01:35 +02:00

devicetree.c

pinctrl: Quiet logging about missing DT nodes when not using DT

2014-02-24 10:44:54 +01:00

devicetree.h

pinctrl: core device tree mapping table parsing support

2012-04-18 13:53:10 +02:00

Kconfig

This is the bulk of GPIO changes for the v3.18 development

2014-10-09 14:58:15 -04:00

Makefile

pinctrl: imx/mxs: move freescale drivers to subdir

2014-09-04 10:05:28 +02:00

pinconf-generic.c

pinctrl: Enable "power-source" to be extracted from DT files

2014-05-28 10:16:35 +02:00

pinconf.c

pinctrl: pinconf: remove warning: unused variable 'ops'

2013-12-13 13:55:15 +01:00

pinconf.h

pinctrl: add function to parse generic pinconfig properties from a dt node

2013-06-16 11:57:32 +02:00

pinctrl-adi2-bf54x.c

pinctrl: pinctrl-adi: combine multiple groups of one function together

2014-02-25 10:49:13 +01:00

pinctrl-adi2-bf60x.c

pinctrl: pinctrl-adi: combine multiple groups of one function together

2014-02-25 10:49:13 +01:00

pinctrl-adi2.c

pinctrl: adi2: Remove duplicate gpiochip_remove_pin_ranges

2014-09-05 10:33:51 +02:00

pinctrl-adi2.h

pinctrl: pinctrl-adi: combine multiple groups of one function together

2014-02-25 10:49:13 +01:00

pinctrl-as3722.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-at91.c

This is the bulk of pin control changes for the v3.18

2014-10-07 20:56:28 -04:00

pinctrl-baytrail.c

pinctrl: baytrail: show output gpio state correctly on Intel Baytrail

2014-10-28 11:16:26 +01:00

pinctrl-bcm281xx.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-bcm2835.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-coh901.c

pinctrl: remove all usage of gpio_remove ret val in driver/pinctl

2014-07-22 16:34:12 +02:00

pinctrl-coh901.h

pinctrl: support pinconfig on the U300

2012-03-12 22:49:03 +01:00

pinctrl-falcon.c

pinctrl: Pass all configs to driver on pin_config_set()

2013-08-28 13:34:41 +02:00

pinctrl-lantiq.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-lantiq.h

pinctrl: lantiq: Fix header file include guard

2014-04-22 08:41:35 +02:00

pinctrl-palmas.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-rockchip.c

This is the bulk of pin control changes for the v3.18

2014-10-07 20:56:28 -04:00

pinctrl-single.c

pinctrl: single: fix freudian slip

2014-09-05 10:33:25 +02:00

pinctrl-st.c

pinctrl: st: remove gpiochip in failure cases

2014-09-23 16:53:18 +02:00

pinctrl-tb10x.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-tegra20.c

pinctrl: Make of_device_id array const

2014-08-29 07:13:04 +02:00

pinctrl-tegra30.c

pinctrl: Make of_device_id array const

2014-08-29 07:13:04 +02:00

pinctrl-tegra114.c

pinctrl: Make of_device_id array const

2014-08-29 07:13:04 +02:00

pinctrl-tegra124.c

pinctrl: tegra: Add MIPI pad control

2014-09-19 12:28:54 -05:00

pinctrl-tegra-xusb.c

This is the bulk of pin control changes for the v3.18

2014-10-07 20:56:28 -04:00

pinctrl-tegra.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-tegra.h

pinctrl: tegra: add missing kerneldoc

2014-04-22 16:55:41 +02:00

pinctrl-tz1090-pdc.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-tz1090.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-u300.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinctrl-utils.c

pinctrl: utils: include export.h to avoid warnings

2013-08-28 15:50:33 +02:00

pinctrl-utils.h

pinctrl: add utility functions for add map/configs

2013-08-14 21:00:41 +02:00

pinctrl-xway.c

pinctrl: lantiq: Release gpiochip resources in fail case

2014-09-23 12:23:09 +02:00

pinmux.c

pinctrl: clean up after enable refactoring

2014-09-04 10:05:07 +02:00

pinmux.h

pinctrl: ifdef CONFIG_DEBUG_FS cleanup

2012-04-18 13:53:12 +02:00