Grant Likely 40aad3c1a9 dt/bindings: Remove all references to device_type "ethernet-phy" ...

The device_type property is deprecated for the flattened device tree and
the value "ethernet-phy" has never been defined as having a useful
meaning. Neither the kernel nor u-boot depend on it. It should never
have appeared in PHY bindings. This patch removes all references to
"ethernet-phy" as a device_type value from the documentation and the
.dts files.

This patch was generated mechanically with the following command and
then verified by looking at the diff.

sed -i '/"ethernet-phy"/d' `git grep -l '"ethernet-phy"'`

Signed-off-by: Grant Likely <grant.likely@linaro.org>
Acked-by: Srinivas Kandagatla <srinivas.kandagatla@st.com>
Cc: Rob Herring <rob.herring@calxeda.com>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>

2014-01-16 11:11:51 +00:00

..

include

kbuild: create an "include chroot" for DT bindings

2013-04-05 12:22:32 -06:00

testcases

of/irq: Fix bug in interrupt parsing refactor.

2013-11-03 23:16:35 +00:00

aks-cdu.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

am33xx.dtsi

Merge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next

2013-11-13 17:40:34 +09:00

am43x-epos-evm.dts

ARM: dts: AM4372: Update Support for EPOS EVM

2013-10-20 19:16:55 +02:00

am335x-base0033.dts

ARM: dts: AM33XX BASE0033: add 32KBit EEPROM support

2013-11-26 15:03:38 -08:00

am335x-bone-common.dtsi

ARM: dts: am335x-bone-common: correct mux mode for cmd line

2013-10-11 21:06:38 +02:00

am335x-bone.dts

ARM: dts: AM33XX: Add AES data and documentation

2013-10-11 21:06:40 +02:00

am335x-boneblack.dts

ARM: dts: AM33XX beagle black: add pinmux and hdmi node to enable display

2013-10-11 21:06:42 +02:00

am335x-evm.dts

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2013-11-15 16:43:53 -08:00

am335x-evmsk.dts

Merge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input

2013-11-15 16:43:53 -08:00

am335x-igep0033.dtsi

ARM: dts: AM33XX IGEP0033: add USB support

2013-11-26 15:03:39 -08:00

am335x-nano.dts

ARM: dts: Add support for Newflow NanoBone board

2013-10-22 14:56:33 +02:00

am3517_mt_ventoux.dts

ARM: dts: AM3XXX: Use #include for all device trees

2013-06-18 18:53:41 -05:00

am3517-evm.dts

ARM: OMAP2+: Fix the machine entry for am3517

2013-12-06 14:20:17 -08:00

am3517.dtsi

ARM: dts: Fix missing entries for am3517

2013-12-06 14:20:16 -08:00

am4372.dtsi

ARM: dts: AM33xx+: Add i2c aliases

2013-10-22 11:05:42 +02:00

animeo_ip.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

armada-370-db.dts

ARM: mvebu: re-enable PCIe on Armada 370 DB

2013-11-25 18:24:36 +00:00

armada-370-mirabox.dts

ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes

2013-08-06 14:11:27 +00:00

armada-370-netgear-rn102.dts

ARM: mvebu: add missing DT Mbus ranges and relocate PCIe DT nodes for RN102

2013-10-01 00:46:30 +00:00

armada-370-netgear-rn104.dts

ARM: mvebu: Add Netgear ReadyNAS 104 board

2013-10-31 15:42:07 +00:00

armada-370-rd.dts

ARM: mvebu: Relocate PCIe node in Armada 370 RD board

2013-08-09 13:17:17 +00:00

armada-370-xp.dtsi

ARM: mvebu: use the virtual CPU registers to access coherency registers

2013-11-25 18:22:10 +00:00

armada-370.dtsi

ARM: mvebu: link PCIe controllers to the MSI controller

2013-09-30 15:00:27 +00:00

armada-xp-axpwifiap.dts

ARM: mvebu: Fix AXP-WiFi-AP DT for MBUS DT binding

2013-08-07 20:05:05 +00:00

armada-xp-db.dts

ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes

2013-08-06 14:11:27 +00:00

armada-xp-gp.dts

ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes

2013-08-06 14:11:27 +00:00

armada-xp-matrix.dts

arm: mvebu: add support for the Armada XP Matrix board

2013-10-03 15:13:01 +00:00

armada-xp-mv78230.dtsi

ARM: mvebu: second PCIe unit of Armada XP mv78230 is only x1 capable

2013-11-23 15:29:06 +00:00

armada-xp-mv78260.dtsi

ARM: mvebu: fix second and third PCIe unit of Armada XP mv78260

2013-11-23 15:31:07 +00:00

armada-xp-mv78460.dtsi

ARM: mvebu: link PCIe controllers to the MSI controller

2013-09-30 15:00:27 +00:00

armada-xp-openblocks-ax3-4.dts

ARM: mvebu: Relocate Armada 370/XP PCIe device tree nodes

2013-08-06 14:11:27 +00:00

armada-xp.dtsi

Changes needed to prepare for making omap3 device tree only:

2013-10-14 15:29:24 -07:00

at91-ariag25.dts

ARM: at91/at91-ariag25.dts: UART0/1 nodes are disabled

2013-05-31 16:42:27 +02:00

at91-foxg20.dts

ARM: at91: switch Fox G20 board .dts to pre-processor defines

2013-05-31 16:42:28 +02:00

at91rm9200_pqfp.dtsi

ARM: at91/dt: add at91rm9200 PQFP package version

2013-08-21 12:18:52 +02:00

at91rm9200.dtsi

ARM: at91: at91rm9200: set default mmc0 pinctrl-names

2013-08-21 11:40:22 +02:00

at91rm9200ek.dts

ARM: at91: dt: rm9200ek: add spi support

2013-06-26 10:13:39 +02:00

at91sam9g15.dtsi

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g15ek.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g20.dtsi

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g20ek_2mmc.dts

ARM: at91: dt: switch to pinctrl to pre-processor

2013-05-17 12:11:39 +02:00

at91sam9g20ek_common.dtsi

ARM: at91: remove pinctrl conflict between mmc and SPI for at91sam9g20ek

2013-10-18 16:50:13 +02:00

at91sam9g20ek.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

at91sam9g25.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9g25ek.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g35.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9g35ek.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9g45.dtsi

Again some nice DT updates for AT91:

2013-06-14 18:51:21 -07:00

at91sam9m10g45ek.dts

ARM: at91: sam9m10g45ek add udc DT support

2013-06-15 00:15:22 +02:00

at91sam9n12.dtsi

ARM: at91: add ssc dma parameter for at91sam9n12

2013-10-14 09:42:38 +02:00

at91sam9n12ek.dts

ARM: at91: add sound support on at91sam9n12ek board

2013-10-14 09:43:26 +02:00

at91sam9x5_macb0.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9x5_macb1.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9x5_usart3.dtsi

ARM: at91: add usart3 alias to dtsi

2013-12-02 14:14:53 +01:00

at91sam9x5.dtsi

Via Paul Walmsley <paul@pwsan.com>:

2013-10-28 14:39:03 -07:00

at91sam9x5cm.dtsi

ARM: at91: dt: switch to pinctrl to pre-processor

2013-05-17 12:11:39 +02:00

at91sam9x5ek.dtsi

ARM: SoC DT updates for 3.12

2013-09-06 13:26:27 -07:00

at91sam9x25.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9x25ek.dts

Adding the DT support to USB gadget High-Speed aka usba.

2013-06-14 18:58:28 -07:00

at91sam9x35.dtsi

ARM: at91/dt: split sam9x5 peripheral definitions

2013-10-16 15:47:07 +02:00

at91sam9x35ek.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

at91sam9260.dtsi

ARM: at91: at91sam9260: add missing pinctrl-names on mmc

2013-08-21 11:14:18 +02:00

at91sam9263.dtsi

Merge branch 'dts-cpus-updates' of git://linux-arm.org/linux-2.6-lp into next/dt

2013-06-07 16:39:38 -07:00

at91sam9263ek.dts

ARM: at91/dts: add the watchdog nodes for at91 boards

2013-05-31 21:54:50 +02:00

atlas6-evb.dts

ARM/dts: prima2: add .dtsi for atlas6 and .dts for atla6-evb board

2013-03-18 17:15:33 +01:00

atlas6.dtsi

Main pin control pull request for the v3.13 cycle:

2013-11-12 15:40:03 +09:00

bcm2835-rpi-b.dts

ARM: bcm2835: Add Raspberry Pi's ACT LED to DT

2013-05-16 20:29:48 -06:00

bcm2835.dtsi

ARM: bcm2835: add missing #xxx-cells to I2C nodes

2013-11-25 21:56:00 -08:00

bcm11351-brt.dts

ARM: dts: bcm281xx: Add card detect GPIO

2013-10-31 10:29:43 -07:00

bcm11351.dtsi

ARM: dts: bcm11351: Use GIC/IRQ defines for sdio interrupts

2013-10-31 10:30:14 -07:00

bcm28155-ap.dts

ARM: dts: bcm281xx: Add card detect GPIO

2013-10-31 10:29:43 -07:00

cros5250-common.dtsi

ARM: dts: Add max77686 RTC interrupt to cros5250-common

2013-11-25 15:14:41 -08:00

da850-enbw-cmc.dts

ARM: davinci: da850: Use #include for all device trees

2013-06-20 15:04:30 +05:30

da850-evm.dts

ARM: davinci: da850: add DT node for ethernet

2013-08-22 00:44:58 +05:30

da850.dtsi

ARM: davinci: da850: do not specify clock_frequency for UART DT node

2013-08-22 00:44:58 +05:30

dove-cm-a510.dts

ARM: dove: use preprocessor on device tree files

2013-09-30 15:00:35 +00:00

dove-cubox.dts

ARM: Dove: fix bad properties of the si5351 clkout2 used by Cubox audio

2013-10-09 13:22:41 +00:00

dove-d2plug.dts

ARM: dove: use preprocessor on device tree files

2013-09-30 15:00:35 +00:00

dove-d3plug.dts

ARM: dove: add initial DT file for Globalscale D3Plug

2013-09-30 15:00:54 +00:00

dove-dove-db.dts

ARM: dove: use preprocessor on device tree files

2013-09-30 15:00:35 +00:00

dove.dtsi

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

dra7-evm.dts

ARM: dts: dra7-evm: add smps123 supply for CPU

2013-10-22 17:33:17 +02:00

dra7.dtsi

ARM: dts: DRA7: Add CPU OPP table

2013-10-22 17:33:40 +02:00

ea3250.dts

…

ecx-2000.dts

ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi

2013-11-04 17:01:05 -06:00

ecx-common.dtsi

EDAC updates for 3.13

2013-11-18 14:50:17 -08:00

elpida_ecb240abacn.dtsi

…

emev2-kzm9d.dts

ARM: shmobile: Sync KZM9D DTS with KZM9D reference DTS

2013-10-08 10:02:21 +09:00

emev2.dtsi

ARM: shmobile: emev2: add PMU information to emev2.dtsi

2013-07-31 15:31:16 +09:00

ethernut5.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

evk-pro3.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

exynos4.dtsi

ARM: dts: Add MIPI PHY node to exynos4.dtsi

2013-10-06 09:14:39 +09:00

exynos4x12-pinctrl.dtsi

ARM: dts: Add pinctrl entries for Exynos4x12 FIMC-IS peripherals

2013-08-06 02:49:43 +09:00

exynos4x12.dtsi

ARM: SoC DT updates for 3.12

2013-09-06 13:26:27 -07:00

exynos5.dtsi

ARM: dts: Fix the RTC DT node name for Exynos5250

2013-08-26 02:28:05 +09:00

exynos4210-origen.dts

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

exynos4210-pinctrl.dtsi

ARM: dts: Add Exynos4210 SoC camera port pinctrl nodes

2013-08-07 01:08:24 +09:00

exynos4210-smdkv310.dts

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

exynos4210-trats.dts

ARM: dts: Work around lack of cpufreq regulator lookup for exynos4210-origen and trats boards

2013-10-16 07:25:40 +09:00

exynos4210-universal_c210.dts

ARM: dts: fix PL330 MDMA1 address in DT for Universal C210 board

2013-10-16 07:25:41 +09:00

exynos4210.dtsi

ARM: SoC DT updates for 3.12

2013-09-06 13:26:27 -07:00

exynos4212.dtsi

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

exynos4412-odroidx.dts

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

exynos4412-origen.dts

ARM: dts: Add fixed voltage regulator to simple bus for origen

2013-10-06 09:21:23 +09:00

exynos4412-smdk4412.dts

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

exynos4412-trats2.dts

ARM: dts: Add SPI1 controller and s5c73m3 sensor node for TRATS2

2013-08-07 01:07:57 +09:00

exynos4412.dtsi

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

exynos5250-arndale.dts

ARM: dts: Add HDMI related I2C nodes for Arndale board

2013-10-08 06:53:12 +09:00

exynos5250-pinctrl.dtsi

ARM: dts: Correct typo in use of samsung,pin-drv for exynos5250

2013-10-16 07:23:42 +09:00

exynos5250-smdk5250.dts

ARM: dts: Disable Exynos5250 I2S controllers by default

2013-10-07 23:13:47 +09:00

exynos5250-snow.dts

ARM: dts: Update the "status" property of RTC DT node for Exynos5250 SoC

2013-08-26 02:28:05 +09:00

exynos5250.dtsi

Merge most of tag 'tags/exynos-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung.git into next/dt

2013-10-27 21:54:02 -07:00

exynos5420-pinctrl.dtsi

ARM: dts: Add pin state information for DP HPD support to Exynos5420

2013-08-19 01:56:31 +09:00

exynos5420-smdk5420.dts

ARM: dts: enable hdmi subsystem for exynos5420 smdk board

2013-10-08 06:49:46 +09:00

exynos5420.dtsi

ARM: dts: add dt nodes for hdmi subsystem for exynos5420

2013-10-08 06:49:46 +09:00

exynos5440-sd5v1.dts

ARM: dts: Fix typo earlyprintk in exynos5440-sd5v1 and ssdk5440 boards

2013-10-16 07:23:55 +09:00

exynos5440-ssdk5440.dts

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

exynos5440.dtsi

ARM: dts: use 'status' property for PCIe nodes

2013-10-29 12:45:57 -07:00

ge863-pro3.dtsi

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

highbank.dts

ARM: dts: calxeda: move memory-controller node out of ecx-common.dtsi

2013-11-04 17:01:05 -06:00

imx6dl-pinfunc.h

ARM: dts: imx: share pad macro names between imx6q and imx6dl

2013-08-22 23:29:11 +08:00

imx6dl-sabreauto.dts

ARM: dts: imx: share pad macro names between imx6q and imx6dl

2013-08-22 23:29:11 +08:00

imx6dl-sabresd.dts

ARM: dts: imx: share pad macro names between imx6q and imx6dl

2013-08-22 23:29:11 +08:00

imx6dl-wandboard.dts

ARM: dts: imx6: Add support for imx6q wandboard

2013-08-22 23:29:28 +08:00

imx6dl.dtsi

ARM: dts: imx: ocram size is different between imx6q and imx6dl

2013-08-22 23:29:44 +08:00

imx6q-arm2.dts

ARM: dts: imx6qdl/imx6sl: add the dma property for uart

2013-08-22 23:29:16 +08:00

imx6q-phytec-pbab01.dts

ARM: dts: Phytec imx6q pfla02 and pbab01 support

2013-06-17 16:04:31 +08:00

imx6q-phytec-pfla02.dtsi

ARM i.MX6Q: dts: Enable I2C1 with EEPROM and PMIC on Phytec phyFLEX-i.MX6 Ouad module

2013-08-22 23:29:50 +08:00

imx6q-pinfunc.h

ARM: dts: imx6q: add quirky select input for USB_OTG_ID

2013-09-26 13:01:37 +08:00

imx6q-sabreauto.dts

ARM: dtsi: enable ahci sata on imx6q platforms

2013-08-22 23:29:25 +08:00

imx6q-sabrelite.dts

ARM: dts: imx6q-sabrelite: Add ethernet phy reset pin into hog

2013-09-29 15:37:33 +08:00

imx6q-sabresd.dts

ARM: dtsi: enable ahci sata on imx6q platforms

2013-08-22 23:29:25 +08:00

imx6q-sbc6x.dts

ARM: dts: MicroSys sbc6x support (i.MX6)

2013-04-09 22:53:37 +08:00

imx6q-udoo.dts

ARM: dts: imx6q-udoo: Add initial board support

2013-09-27 13:31:44 +08:00

imx6q-wandboard.dts

ARM: dts: imx6q-wandboard: Add sata support

2013-08-22 23:29:30 +08:00

imx6q.dtsi

ARM: dts: imx: ocram size is different between imx6q and imx6dl

2013-08-22 23:29:44 +08:00

imx6qdl-sabreauto.dtsi

ARM: dts: imx6qdl: add uhs pinctrl state for usdhc3

2013-09-26 13:01:35 +08:00

imx6qdl-sabresd.dtsi

ARM: dts: imx6qdl-sabresd: Add backlight support for lvds

2013-10-12 16:15:05 +08:00

imx6qdl-wandboard.dtsi

ARM: dts: imx6qdl-wandboard: Provide phy-reset-gpios

2013-09-29 15:37:46 +08:00

imx6qdl.dtsi

ARM: dts: imx6qdl: disable spdif "rxtx5" clock option

2013-11-18 09:21:29 +08:00

imx6sl-evk.dts

ARM: dts: imx6sl-evk: enable the SPI NOR

2013-10-18 16:27:45 +08:00

imx6sl-pinfunc.h

pinctrl: add pinctrl driver for imx6sl

2013-04-09 22:53:38 +08:00

imx6sl.dtsi

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

imx23-evk.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx23-olinuxino.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx23-pinfunc.h

ARM: dts: mxs: add pinctrl header files

2013-09-26 13:01:36 +08:00

imx23-stmp378x_devb.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx23.dtsi

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

imx25-karo-tx25.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx25-pdk.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx25.dtsi

ARM: dts: imx25: Make lcdc compatible to imx21 fb

2013-08-22 23:29:15 +08:00

imx27-apf27.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx27-apf27dev.dts

ARM: imx27-apf27dev: Add framebuffer support

2013-10-08 14:36:41 +08:00

imx27-pdk.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx27-phytec-phycard-s-rdk.dts

ARM: dts: imx27 phyCARD-S, i2c ADC device node

2013-08-22 23:29:05 +08:00

imx27-phytec-phycard-s-som.dts

ARM: dts: imx27 phyCARD-S, move i2c1 and owire to rdk

2013-08-22 23:29:03 +08:00

imx27-phytec-phycore-rdk.dts

ARM: dts: imx27-phytec-phycore-rdk: Add CAN node

2013-08-22 23:28:56 +08:00

imx27-phytec-phycore-som.dts

ARM: dts: imx27-phytec-phycore-som: Enable AUDMUX

2013-08-22 23:29:57 +08:00

imx27.dtsi

ARM: imx27: add missing #pwm-cells property

2013-10-18 16:27:01 +08:00

imx28-apf28.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use pinctrl headers

2013-09-26 13:01:36 +08:00

imx28-apf28dev.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-apx4devkit.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10036.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10037.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10049.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10055.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10056.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10057.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-cfa10058.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-evk.dts

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

imx28-m28cu3.dts

ARM: dts: mxs: Add MSR M28CU3 board

2013-10-05 10:16:33 +08:00

imx28-m28evk.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-pinfunc.h

ARM: dts: mxs: add pinctrl header files

2013-09-26 13:01:36 +08:00

imx28-sps1.dts

ARM: dts: mxs: modify mx23/mx28 dts files to use padconfig defines

2013-09-26 13:01:37 +08:00

imx28-tx28.dts

ARM: dts: tx28: restructure and update DTS file

2013-09-26 13:01:37 +08:00

imx28.dtsi

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

imx31-bug.dts

ARM: imx: use #include for all device trees

2013-04-09 22:52:49 +08:00

imx31.dtsi

ARM: dts: imx: Add the missing cpus node

2013-08-22 23:29:01 +08:00

imx35-pinfunc.h

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx51-apf51.dts

ARM: i.MX5 clocks: Remove optional clock setup (CKIH1) from i.MX51 template

2013-08-22 23:29:53 +08:00

imx51-apf51dev.dts

ARM: imx51-apf51dev: Add parallel display support

2013-10-08 14:36:33 +08:00

imx51-babbage.dts

ARM: dts: imx51-babbage: Make DVI and WVGA panel functional

2013-10-09 09:38:17 +08:00

imx51-pinfunc.h

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx51.dtsi

ARM: dts: i.MX51: Fix OTG PHY clock

2013-11-11 22:58:45 +08:00

imx53-ard.dts

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx53-evk.dts

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx53-m53evk.dts

ARM: mx5: Add support for DENX M53EVK

2013-06-17 16:04:16 +08:00

imx53-mba53.dts

ARM i.MX53: mba53: Fix PWM backlight DT node

2013-07-15 08:28:10 +08:00

imx53-pinfunc.h

ARM: dts: imx53: fix SD2_DATA1 pad AUDMUX_AUD4 configuration

2013-04-09 22:53:37 +08:00

imx53-qsb.dts

ARM: dts: imx53-qsb: Do not use GPIO1_8 as wakeup source

2013-10-06 19:53:22 +08:00

imx53-smd.dts

pinctrl: imx: move hard-coding data into device tree

2013-04-09 22:52:50 +08:00

imx53-tqma53.dtsi

ARM i.MX53: tqma53: add WP/CD pinctrl and vmmc to esdhc2

2013-06-17 16:04:26 +08:00

imx53-tx53.dtsi

ARM: dts: add Ka-Ro tx53 devicetree

2013-06-17 16:04:18 +08:00

imx53.dtsi

ARM: imx: add ocram clock for imx53

2013-08-22 23:29:46 +08:00

integrator.dtsi

ARM: integrator: move CM base into device tree

2013-10-16 14:09:56 +02:00

integratorap.dts

ARM: integrator: core module registers from compatible strings

2013-10-16 14:10:14 +02:00

integratorcp.dts

ARM: SoC platform changes for 3.13

2013-11-11 16:49:45 +09:00

keystone-clocks.dtsi

ARM: dts: keystone: Add clock tree data to devicetree

2013-10-08 15:31:14 -04:00

keystone.dts

ARM: dts: keystone: Add the SPI nodes

2013-10-10 19:52:17 -04:00

kirkwood-98dx4122.dtsi

…

kirkwood-6281.dtsi

ARM: kirkwood: Relocate PCIe device tree nodes

2013-08-06 14:11:53 +00:00

kirkwood-6282.dtsi

ARM: kirkwood: Relocate PCIe device tree nodes

2013-08-06 14:11:53 +00:00

kirkwood-cloudbox.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-db-88f6281.dts

ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding

2013-10-01 16:28:03 +00:00

kirkwood-db-88f6282.dts

ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding

2013-10-01 16:28:03 +00:00

kirkwood-db.dtsi

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-dns320.dts

ARM: kirkwood: Use the preprocessor on device tree files

2013-08-06 14:11:37 +00:00

kirkwood-dns325.dts

ARM: kirkwood: Use the preprocessor on device tree files

2013-08-06 14:11:37 +00:00

kirkwood-dnskw.dtsi

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-dockstar.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-dreamplug.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-goflexnet.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-guruplug-server-plus.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-ib62x0.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-iconnect.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-iomega_ix2_200.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-is2.dts

ARM: SoC board updates for 3.12

2013-09-06 13:34:43 -07:00

kirkwood-km_kirkwood.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-lschlv2.dts

ARM: kirkwood: Use the preprocessor on device tree files

2013-08-06 14:11:37 +00:00

kirkwood-lsxhl.dts

ARM: kirkwood: Use the preprocessor on device tree files

2013-08-06 14:11:37 +00:00

kirkwood-lsxl.dtsi

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-mplcec4.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-mv88f6281gtw-ge.dts

ARM: kirkwood: use dts pre-processor for mv88f6281gtw-ge

2013-08-06 16:14:14 +00:00

kirkwood-netgear_readynas_duo_v2.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-ns2-common.dtsi

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-ns2.dts

ARM: SoC board updates for 3.12

2013-09-06 13:34:43 -07:00

kirkwood-ns2lite.dts

ARM: SoC board updates for 3.12

2013-09-06 13:34:43 -07:00

kirkwood-ns2max.dts

ARM: SoC board updates for 3.12

2013-09-06 13:34:43 -07:00

kirkwood-ns2mini.dts

ARM: SoC board updates for 3.12

2013-09-06 13:34:43 -07:00

kirkwood-nsa310-common.dtsi

ARM: kirkwood: Move the nand node under the mbus node

2013-10-01 16:36:12 +00:00

kirkwood-nsa310.dts

ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding

2013-10-01 16:28:03 +00:00

kirkwood-nsa310a.dts

ARM: kirkwood: use dts pre-processor for nsa310 boards

2013-08-16 13:02:08 +00:00

kirkwood-openblocks_a6.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-openblocks_a7.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-sheevaplug-common.dtsi

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-sheevaplug-esata.dts

ARM: kirkwood: Use the preprocessor on device tree files

2013-08-06 14:11:37 +00:00

kirkwood-sheevaplug.dts

ARM: kirkwood: Use the preprocessor on device tree files

2013-08-06 14:11:37 +00:00

kirkwood-topkick.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood-ts219-6281.dts

ARM: SoC board updates for 3.12

2013-09-06 13:34:43 -07:00

kirkwood-ts219-6282.dts

ARM: kirkwood: Remove kirkwood_setup_wins and rely on the DT binding

2013-10-01 16:28:03 +00:00

kirkwood-ts219.dtsi

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

kirkwood.dtsi

Changes needed to prepare for making omap3 device tree only:

2013-10-14 15:29:24 -07:00

kizbox.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

lpc32xx.dtsi

ARM: dts: lpc32xx: cpus/cpu nodes dts updates

2013-05-23 10:45:13 +01:00

Makefile

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

marco-evb.dts

…

marco.dtsi

…

mmp2-brownstone.dts

…

mmp2.dtsi

ARM: mmp: add more compatible names in gpio driver

2013-04-11 10:00:34 +08:00

mpa1600.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

mxs-pinfunc.h

ARM: dts: mxs: add pinctrl header files

2013-09-26 13:01:36 +08:00

nspire-classic.dtsi

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

nspire-clp.dts

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

nspire-cx.dts

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

nspire-tp.dts

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

nspire.dtsi

arm: Add device trees for TI-Nspire hardware

2013-06-21 20:06:29 +02:00

omap2.dtsi

ARM: dts: Fix omap2 specific dtsi files by adding the missing entries

2013-11-15 14:35:29 -08:00

omap3-beagle-xm.dts

ARM: dts: omap3-beagle: Fix USB host on beagle boards (for 3.13)

2013-11-26 15:03:39 -08:00

omap3-beagle.dts

ARM: dts: omap3-beagle: Add omap-twl4030 audio support

2013-12-02 11:38:14 -08:00

omap3-devkit8000.dts

ARM: dts: omap3-devkit8000: fix a typo in GMPC node

2013-10-11 21:06:33 +02:00

omap3-evm-37xx.dts

ARM: dts: Add basic support for TMDSEVM3730 (Mistral AM/DM37x EVM)

2013-10-14 11:34:37 -07:00

omap3-evm-common.dtsi

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

omap3-evm.dts

ARM: dts: Add common support for omap3-evm

2013-10-14 11:34:37 -07:00

omap3-gta04.dts

ARM: dts: omap3: Adapt USB OTG to generic PHY framework

2013-10-20 19:16:08 +02:00

omap3-igep0020.dts

ARM: dts: omap3-igep0020: name twl4030 VPLL2 regulator as vdds_dsi

2013-11-26 15:03:39 -08:00

omap3-igep0030.dts

ARM: dts: omap3-igep: Update to use the TI AM/DM37x processor

2013-11-26 15:03:37 -08:00

omap3-igep.dtsi

ARM: dts: omap3-igep0020: Add pinmux setup for i2c devices

2013-11-26 15:03:37 -08:00

omap3-n9.dts

ARM: dts: add minimal DT support for Nokia N950 & N9 phones

2013-10-18 10:24:33 -07:00

omap3-n900.dts

ARM: dts: Fix booting for secure omaps

2013-12-06 15:30:43 -08:00

omap3-n950-n9.dtsi

ARM: dts: Fix booting for secure omaps

2013-12-06 15:30:43 -08:00

omap3-n950.dts

ARM: dts: add minimal DT support for Nokia N950 & N9 phones

2013-10-18 10:24:33 -07:00

omap3-overo.dtsi

ARM: dts: omap: update usb_otg_hs data

2013-09-27 17:36:58 -07:00

omap3-tobi.dts

ARM: dts: omap3-tobi: Correct polarity for GPIO LED

2013-06-19 04:38:14 -05:00

omap3-zoom3.dts

ARM: dts: Add basic support for zoom3

2013-10-18 10:24:33 -07:00

omap3.dtsi

ARM: OMAP2+: Fix more missing data for omap3.dtsi file

2013-11-25 14:23:45 -08:00

omap4-panda-a4.dts

ARM: dts: OMAP2+: Use pinctrl constants

2013-06-18 18:53:40 -05:00

omap4-panda-common.dtsi

ARM: dts: omap4-panda-common: Fix pin muxing for wl12xx

2013-12-02 11:38:13 -08:00

omap4-panda-es.dts

ARM: dts: omap4-panda-es: Do not reset gpio1

2013-10-20 19:16:53 +02:00

omap4-panda.dts

ARM: dts: OMAP2+: Use #include for all device trees

2013-06-18 18:53:38 -05:00

omap4-sdp-es23plus.dts

ARM: dts: OMAP2+: Use pinctrl constants

2013-06-18 18:53:40 -05:00

omap4-sdp.dts

ARM: dts: omap4-sdp: Fix pin muxing for wl12xx

2013-12-02 11:38:14 -08:00

omap4-var-som.dts

ARM: dts: OMAP4/5: Use existing constants for IRQs

2013-06-18 18:53:39 -05:00

omap4.dtsi

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

omap5-uevm.dts

ARM: dts: omap5-uevm: Remove pinmux for dmic pins

2013-10-23 11:40:47 +02:00

omap5.dtsi

ARM: SoC DT updates for 3.13

2013-11-11 17:34:56 +09:00

omap34xx-hs.dtsi

ARM: dts: Fix booting for secure omaps

2013-12-06 15:30:43 -08:00

omap34xx.dtsi

ARM: dts: OMAP2+: Use #include for all device trees

2013-06-18 18:53:38 -05:00

omap36xx-hs.dtsi

ARM: dts: Fix booting for secure omaps

2013-12-06 15:30:43 -08:00

omap36xx.dtsi

ARM: dts: Add missing reg, interrupt and dma entries for omap3

2013-10-22 05:34:49 -07:00

omap443x.dtsi

ARM: dts: OMAP443x: Add bandgap entry for OMAP443x devices

2013-06-18 18:53:46 -05:00

omap2420-h4.dts

ARM: dts: Remove '0x's from OMAP2420 H4 DTS file

2013-10-08 17:51:40 +02:00

omap2420.dtsi

ARM: dts: Fix omap2 specific dtsi files by adding the missing entries

2013-11-15 14:35:29 -08:00

omap2430.dtsi

ARM: dts: Fix omap2 specific dtsi files by adding the missing entries

2013-11-15 14:35:29 -08:00

omap3430-sdp.dts

ARM: dts: Remove '0x's from OMAP3430 SDP DTS file

2013-10-08 17:51:41 +02:00

omap4460.dtsi

ARM: dts: OMAP4460: Add bandgap entry for OMAP4460 devices

2013-06-18 18:53:46 -05:00

omap-gpmc-smsc911x.dtsi

ARM: dts: Fix the name of supplies for smsc911x shared by OMAP

2013-12-02 11:38:15 -08:00

omap-zoom-common.dtsi

ARM: OMAP2+: Fix GPMC and simplify bootloader timings for 8250 and smc91x

2013-11-15 14:33:26 -08:00

orion5x-lacie-ethernet-disk-mini-v2.dts

dt/bindings: Remove all references to device_type "ethernet-phy"

2014-01-16 11:11:51 +00:00

orion5x.dtsi

ARM: orion5x: update intc device tree node to new reg layout

2013-07-25 21:07:09 +00:00

phy3250.dts

…

picoxcell-pc3x2.dtsi

ARM: dts: picoxcell: cpus/cpu nodes dts updates

2013-05-23 10:45:15 +01:00

picoxcell-pc3x3.dtsi

ARM: dts: picoxcell: cpus/cpu nodes dts updates

2013-05-23 10:45:15 +01:00

picoxcell-pc7302-pc3x2.dts

…

picoxcell-pc7302-pc3x3.dts

…

pm9g45.dts

ARM: at91: dt: switch to pinctrl to pre-processor

2013-05-17 12:11:39 +02:00

prima2-evb.dts

…

prima2.dtsi

Main pin control pull request for the v3.13 cycle:

2013-11-12 15:40:03 +09:00

pxa2xx.dtsi

ARM: dts: pxa2xx: cpus/cpu nodes dts updates

2013-05-23 10:45:17 +01:00

pxa3xx.dtsi

ARM: pxa: DTS: override gpio node in pxa3xx.dtsi

2013-08-13 15:51:02 -07:00

pxa27x.dtsi

…

pxa168-aspenite.dts

…

pxa168.dtsi

ARM: mmp: add more compatible names in gpio driver

2013-04-11 10:00:34 +08:00

pxa910-dkb.dts

…

pxa910.dtsi

ARM: mmp: add more compatible names in gpio driver

2013-04-11 10:00:34 +08:00

qcom-msm8660-surf.dts

ARM: msm: Rename msm devicetrees to have standard 'qcom' prefix

2013-09-25 13:02:56 -07:00

qcom-msm8960-cdp.dts

ARM: msm: Rename msm devicetrees to have standard 'qcom' prefix

2013-09-25 13:02:56 -07:00

r7s72100-genmai.dts

ARM: shmobile: Genmai support

2013-10-08 10:02:20 +09:00

r7s72100.dtsi

ARM: shmobile: Initial r7s72100 SoC support

2013-10-08 09:53:00 +09:00

r8a73a4-ape6evm-reference.dts

ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards

2013-10-08 09:25:13 +09:00

r8a73a4-ape6evm.dts

ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards

2013-10-08 09:25:13 +09:00

r8a73a4.dtsi

Changes needed to prepare for making omap3 device tree only:

2013-10-14 15:29:24 -07:00

r8a7740-armadillo800eva-reference.dts

ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces

2013-10-08 09:25:14 +09:00

r8a7740-armadillo800eva.dts

ARM: shmobile: armadillo800eva: remove nfsroot settings from bootargs

2013-08-06 18:07:13 +09:00

r8a7740.dtsi

ARM: shmobile: armadillo800eva-reference: add SDHI and MMCIF interfaces

2013-10-08 09:25:14 +09:00

r8a7778-bockw-reference.dts

ARM: shmobile: bockw: fixup ether node naming

2013-10-08 10:37:49 +09:00

r8a7778-bockw.dts

ARM: shmobile: Mount root file systems in r/w mode for all DT platforms

2013-08-05 16:45:33 +09:00

r8a7778.dtsi

Changes needed to prepare for making omap3 device tree only:

2013-10-14 15:29:24 -07:00

r8a7779-marzen-reference.dts

ARM: shmobile: marzen: fixup SMSC IRQ number on DTS

2013-10-08 09:25:22 +09:00

r8a7779-marzen.dts

ARM: shmobile: marzen: Add r8a7779-marzen.dtb

2013-07-30 13:27:56 +09:00

r8a7779.dtsi

Changes needed to prepare for making omap3 device tree only:

2013-10-14 15:29:24 -07:00

r8a7790-lager-reference.dts

ARM: shmobile: Mount root file systems in r/w mode for all DT platforms

2013-08-05 16:45:33 +09:00

r8a7790-lager.dts

ARM: shmobile: lager: enable nfsroot in DTS

2013-08-06 18:06:20 +09:00

r8a7790.dtsi

ARM: shmobile: r8a7790: fix shdi resource sizes

2013-12-19 18:14:48 +09:00

r8a7791-koelsch.dts

ARM: shmobile: Koelsch support

2013-09-30 16:56:17 +09:00

r8a7791.dtsi

ARM: shmobile: r8a7791 SMP device tree node

2013-10-08 09:25:22 +09:00

rk3xxx.dtsi

ARM: rockchip: enable arm-global-timer

2013-10-14 23:03:23 +02:00

rk3066a-bqcurie2.dts

ARM: rockchip: add dts for bqcurie2 tablet

2013-10-14 23:03:46 +02:00

rk3066a-clocks.dtsi

arm: Add basic clocks for Rockchip rk3066a SoCs

2013-06-21 09:20:56 +02:00

rk3066a.dtsi

ARM: SoC board updates for 3.13

2013-11-11 16:57:16 +09:00

rk3188-clocks.dtsi

ARM: rockchip: add support for rk3188 and Radxa Rock board

2013-10-14 23:04:09 +02:00

rk3188-radxarock.dts

ARM: rockchip: add support for rk3188 and Radxa Rock board

2013-10-14 23:04:09 +02:00

rk3188.dtsi

ARM: rockchip: add support for rk3188 and Radxa Rock board

2013-10-14 23:04:09 +02:00

s3c24xx.dtsi

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

s3c64xx-pinctrl.dtsi

ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs

2013-09-17 06:48:28 +09:00

s3c64xx.dtsi

ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs

2013-09-17 06:48:28 +09:00

s3c2416-pinctrl.dtsi

ARM: dts: add devicetree support for s3c2416-smdk2416

2013-05-21 01:06:12 +09:00

s3c2416-smdk2416.dts

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

s3c2416.dtsi

ARM: dts: use #include for all device trees for Samsung

2013-06-19 03:28:40 +09:00

s3c6400.dtsi

ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs

2013-09-17 06:48:28 +09:00

s3c6410-mini6410.dts

ARM: dts: Add dts file for S3C6410-based Mini6410 board

2013-09-17 06:48:29 +09:00

s3c6410-smdk6410.dts

ARM: dts: Add dts file for S3C6410-based SMDK6410 board

2013-09-17 06:48:29 +09:00

s3c6410.dtsi

ARM: dts: Add basic dts include files for Samsung S3C64xx SoCs

2013-09-17 06:48:28 +09:00

sama5d3_can.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3_emac.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3_gmac.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3_lcd.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3_mci2.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3_tcb1.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3_uart.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3xcm.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d3xdm.dtsi

ARM: at91: dt: switch to pinctrl to pre-processor

2013-05-17 12:11:39 +02:00

sama5d3xmb.dtsi

ARM: at91/dt: fix phy address in sama5xmb to match the reg property

2013-08-29 15:21:45 -04:00

sama5d31.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d31ek.dts

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d33.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d33ek.dts

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d34.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d34ek.dts

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d35.dtsi

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

sama5d35ek.dts

ARM: at91/dt: split sama5d3 peripheral definitions

2013-10-16 15:47:08 +02:00

samsung_k3pe0e000b.dtsi

…

sh73a0-kzm9g-reference.dts

ARM: shmobile: only enable used I2C interfaces in DT on all Renesas boards

2013-10-08 09:25:13 +09:00

sh73a0-kzm9g.dts

ARM: shmobile: Mount root file systems in r/w mode for all DT platforms

2013-08-05 16:45:33 +09:00

sh73a0.dtsi

Changes needed to prepare for making omap3 device tree only:

2013-10-14 15:29:24 -07:00

sh7372-mackerel.dts

…

sh7372.dtsi

ARM: shmobile: sh7372: Add pin control device to device tree

2013-07-22 10:12:36 +09:00

skeleton64.dtsi

ARM: dts: Fix memory node in skeleton64.dtsi

2013-08-07 16:33:50 +00:00

skeleton.dtsi

…

socfpga_arria5_socdk.dts

dts: socfpga: Add support for Altera's SOCFPGA Arria V board

2013-10-09 16:58:31 -05:00

socfpga_arria5.dtsi

dts: socfpga: Add support for Altera's SOCFPGA Arria V board

2013-10-09 16:58:31 -05:00

socfpga_cyclone5_socdk.dts

ARM: socfpga: dts: Move common nodes to cyclone5 dtsi

2013-10-09 16:56:24 -05:00

socfpga_cyclone5_sockit.dts

ARM: socfpga: dts: Add support for terasic SoCkit

2013-10-09 16:57:08 -05:00

socfpga_cyclone5.dtsi

ARM: socfpga: dts: Move common nodes to cyclone5 dtsi

2013-10-09 16:56:24 -05:00

socfpga_vt.dts

ARM: socfpga: dts: Add ethernet bindings for SOCFPGA

2013-06-11 16:34:57 -07:00

socfpga.dtsi

arm: dts: socfpga: Change some clocks of gate-clk type to perip-clk

2013-12-03 14:19:53 -08:00

spear3xx.dtsi

ARM: dts: spear: cpus/cpu nodes dts updates

2013-05-23 10:45:21 +01:00

spear13xx.dtsi

ARM: dts: spear: cpus/cpu nodes dts updates

2013-05-23 10:45:21 +01:00

spear300-evb.dts

…

spear300.dtsi

…

spear310-evb.dts

…

spear310.dtsi

gpio: add gpio offset in gpio range cells property

2013-03-07 05:27:29 +01:00

spear320-evb.dts

…

spear320-hmi.dts

…

spear320.dtsi

gpio: add gpio offset in gpio range cells property

2013-03-07 05:27:29 +01:00

spear600-evb.dts

…

spear600.dtsi

ARM: dts: spear: cpus/cpu nodes dts updates

2013-05-23 10:45:21 +01:00

spear1310-evb.dts

…

spear1310.dtsi

gpio: add gpio offset in gpio range cells property

2013-03-07 05:27:29 +01:00

spear1340-evb.dts

…

spear1340.dtsi

ARM: arm-soc: late cleanups

2013-05-07 11:22:14 -07:00

st-pincfg.h

ARM: sti: Add STiH415 SOC support

2013-06-25 13:26:47 -07:00

ste-ccu8540-pinctrl.dtsi

ARM: ux500: fix devicetree builds

2013-08-14 22:32:07 +02:00

ste-ccu8540.dts

ARM: ux500: fix devicetree builds

2013-08-14 22:32:07 +02:00

ste-ccu9540.dts

ARM: ux500: fix devicetree builds

2013-08-14 22:32:07 +02:00

ste-dbx5x0.dtsi

ARM: ux500: register all SSP and SPI blocks

2013-10-18 14:55:44 +02:00

ste-href-stuib.dtsi

ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS

2013-10-03 10:29:24 +02:00

ste-href-tvk1281618.dtsi

ARM: ux500: register the tc35892 GPIO on the TVK UIB

2013-10-03 10:18:36 +02:00

ste-href.dtsi

ARM: ux500: move TC35892 at 0x42 to hrefprev60

2013-10-02 16:17:03 +02:00

ste-hrefprev60-stuib.dts

ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS

2013-10-03 10:29:24 +02:00

ste-hrefprev60-tvk.dts

ARM: ux500: split the HREF DTS files from two to four

2013-10-02 16:17:04 +02:00

ste-hrefprev60.dtsi

ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS

2013-10-03 10:29:24 +02:00

ste-hrefv60plus-stuib.dts

ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS

2013-10-03 10:29:24 +02:00

ste-hrefv60plus-tvk.dts

ARM: ux500: split the HREF DTS files from two to four

2013-10-02 16:17:04 +02:00

ste-hrefv60plus.dtsi

ARM: ux500: move BU21013 touchpad GPIOs into top-level DTS

2013-10-03 10:29:24 +02:00

ste-nomadik-pinctrl.dtsi

ARM: u8540: Add Pinctrl Device Tree settings for uart0, uart2

2013-08-06 23:48:50 +02:00

ste-nomadik-s8815.dts

Nomadik DT and clock work:

2013-06-20 16:13:10 +02:00

ste-nomadik-stn8815.dtsi

ARM: nomadik: delete FSMC platform data

2013-09-24 21:25:19 +02:00

ste-snowball.dts

ARM: ux500: Enable CPUFreq on Snowball

2013-09-26 11:09:27 +02:00

ste-u300.dts

ARM: u300: switch to using syscon regmap for board

2013-06-17 13:54:39 +02:00

stih41x-b2000.dtsi

ARM: stih41x: Add B2000 board support

2013-06-25 13:42:50 -07:00

stih41x-b2020.dtsi

ARM: stih41x: Add B2020 board support

2013-06-25 13:42:51 -07:00

stih41x.dtsi

ARM: STi: Fix cpu nodes with correct device_type.

2013-08-04 13:40:48 -07:00

stih415-b2000.dts

ARM: stih41x: Add B2000 board support

2013-06-25 13:42:50 -07:00

stih415-b2020.dts

ARM: stih41x: Add B2020 board support

2013-06-25 13:42:51 -07:00

stih415-clock.dtsi

ARM: sti: Add STiH415 SOC support

2013-06-25 13:26:47 -07:00

stih415-pinctrl.dtsi

ARM: sti: Add STiH415 SOC support

2013-06-25 13:26:47 -07:00

stih415.dtsi

ARM: sti: Add STiH415 SOC support

2013-06-25 13:26:47 -07:00

stih416-b2000.dts

ARM: stih41x: Add B2000 board support

2013-06-25 13:42:50 -07:00

stih416-b2020.dts

ARM: stih41x: Add B2020 board support

2013-06-25 13:42:51 -07:00

stih416-clock.dtsi

ARM: sti: Add STiH416 SOC support

2013-06-25 13:26:58 -07:00

stih416-pinctrl.dtsi

ARM: dts: STi: Fix pinconf setup for STiH416 serial2

2013-07-22 19:34:55 -07:00

stih416.dtsi

ARM: dts: STi: Fix pinconf setup for STiH416 serial2

2013-07-22 19:34:55 -07:00

sun4i-a10-a1000.dts

ARM: sunxi: dt: Add device tree for Mele A1000

2013-08-14 09:59:20 +02:00

sun4i-a10-cubieboard.dts

ARM: sun4i: dt: Fix A10 SoC bus base address

2013-08-10 19:13:43 +02:00

sun4i-a10-hackberry.dts

ARM: sun4i: dt: Fix A10 SoC bus base address

2013-08-10 19:13:43 +02:00

sun4i-a10-mini-xplus.dts

ARM: sun4i: dt: Fix A10 SoC bus base address

2013-08-10 19:13:43 +02:00

sun4i-a10.dtsi

ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i

2013-09-16 18:22:12 -05:00

sun5i-a10s-olinuxino-micro.dts

ARM: sun5i: dt: Fix A10s SoC bus base address

2013-08-10 19:13:44 +02:00

sun5i-a10s.dtsi

ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i

2013-09-16 18:22:12 -05:00

sun5i-a13-olinuxino.dts

ARM: sun5i: dt: Fix A13 SoC bus base address

2013-08-10 19:13:45 +02:00

sun5i-a13.dtsi

ARM: sunxi: dt: Add sunxi-sid to dts for sun4i, sun5i and sun7i

2013-09-16 18:22:12 -05:00

sun6i-a31-colombus.dts

ARM: sun6i: colombus: Add uart0 muxing

2013-08-22 00:19:17 +02:00

sun6i-a31.dtsi

ARM: sun6i: dt: Fix interrupt trigger types

2013-12-11 17:15:24 -08:00

sun7i-a20-cubieboard2.dts

ARM: sun7i: cubieboard2: Enable the I2C controllers

2013-09-18 11:35:38 -05:00

sun7i-a20-cubietruck.dts

ARM: sunxi: dts: Add support for the cubieboard3, the CubieTruck

2013-10-08 11:35:19 +02:00

sun7i-a20-olinuxino-micro.dts

ARM: sun7i: olinuxino-micro: Enable the I2C controllers

2013-09-18 11:35:38 -05:00

sun7i-a20.dtsi

ARM: sun7i: dt: Fix interrupt trigger types

2013-12-11 17:15:21 -08:00

tegra20-colibri-512.dtsi

ARM: tegra: device tree changes for 3.12

2013-08-20 16:30:54 -07:00

tegra20-harmony.dts

ARM: tegra: harmony: Initialize PCIe from DT

2013-08-12 14:19:21 -06:00

tegra20-iris-512.dts

ARM: tegra: convert device tree files to use GPIO defines

2013-05-28 16:13:49 -06:00

tegra20-medcom-wide.dts

ARM: tegra20: convert device tree files to use CLK defines

2013-05-28 16:13:50 -06:00

tegra20-paz00.dts

ARM: tegra: enable LP1 suspend mode

2013-08-12 12:23:14 -06:00

tegra20-plutux.dts

ARM: tegra20: convert device tree files to use CLK defines

2013-05-28 16:13:50 -06:00

tegra20-seaboard.dts

ARM: SoC DT updates for 3.12

2013-09-06 13:26:27 -07:00

tegra20-tamonten.dtsi

ARM: tegra: tamonten: Add PCIe support

2013-08-12 14:19:12 -06:00

tegra20-tec.dts

ARM: tegra: tec: Add PCIe support

2013-08-12 14:19:16 -06:00

tegra20-trimslice.dts

ARM: SoC DT updates for 3.12

2013-09-06 13:26:27 -07:00

tegra20-ventana.dts

ARM: tegra: enable LP1 suspend mode

2013-08-12 12:23:14 -06:00

tegra20-whistler.dts

ARM: SoC DT updates for 3.12

2013-09-06 13:26:27 -07:00

tegra20.dtsi

ARM: SoC DT updates for 3.12

2013-09-06 13:26:27 -07:00

tegra30-beaver.dts

ARM: tegra: add Mic Jack to Beaver device tree

2013-08-15 09:35:07 -06:00

tegra30-cardhu-a02.dts

ARM: tegra: convert device tree files to use GPIO defines

2013-05-28 16:13:49 -06:00

tegra30-cardhu-a04.dts

ARM: tegra: convert device tree files to use GPIO defines

2013-05-28 16:13:49 -06:00

tegra30-cardhu.dtsi

ARM: tegra: add vcc supply for nct1008 to Cardhu

2013-10-07 13:17:35 -06:00

tegra30.dtsi

ARM: tegra: Use symbolic names for gr3d clocks

2013-10-17 11:42:47 -06:00

tegra114-dalmore.dts

ARM: tegra: add DT entry for nct1008 to Dalmore

2013-10-07 13:17:34 -06:00

tegra114.dtsi

ARM: tegra: fix Tegra114 IOMMU register address

2013-10-30 17:38:27 -07:00

tegra124-venice2.dts

ARM: tegra: enable LP1 suspend mode for Venice2

2013-10-11 12:32:17 -06:00

tegra124.dtsi

ARM: tegra: add GPIO controller to tegra124.dtsi

2013-10-15 09:25:28 -06:00

tny_a9g20.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

tny_a9260_common.dtsi

…

tny_a9260.dts

ARM: at91: dt: use #include for all device trees

2013-05-17 11:27:49 +02:00

tny_a9263.dts

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

tps6507x.dtsi

ARM: regulator: add tps6507x device tree data

2013-04-03 09:44:51 +05:30

tps65217.dtsi

…

tps65910.dtsi

…

twl4030_omap3.dtsi

ARM: dts: TWL4030: fix mux and wakeup for SYS_NIRQ line

2013-06-18 18:53:45 -05:00

twl4030.dtsi

Highlights:

2013-11-18 15:35:09 -08:00

twl6030_omap4.dtsi

ARM: dts: twl6030: Move common configuration for OMAP4 boards in a separate dtsi file

2013-10-08 17:51:41 +02:00

twl6030.dtsi

ARM: dts: twl6030: Add PWM support

2013-04-09 00:16:50 +02:00

usb_a9g20_common.dtsi

ARM: at91: dt: add Calao USB-A9G20 low power version

2013-05-31 16:52:37 +02:00

usb_a9g20_lpw.dts

ARM: at91: dt: add Calao USB-A9G20 low power version

2013-05-31 16:52:37 +02:00

usb_a9g20-dab-mmx.dtsi

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

usb_a9g20.dts

ARM: at91: dt: add Calao USB-A9G20 low power version

2013-05-31 16:52:37 +02:00

usb_a9260_common.dtsi

ARM: at91: dt: switch to standard GPIO flag defines.

2013-05-17 11:27:49 +02:00

usb_a9260.dts

ARM: at91: dt: usb-a9260: update shutdown controller

2013-05-31 16:52:35 +02:00

usb_a9263.dts

ARM: at91: dt: usb-a9263: add dataflash support

2013-05-31 16:52:36 +02:00

versatile-ab.dts

arm/versatile: Fix versatile irq specifications.

2013-10-28 16:50:11 -07:00

versatile-pb.dts

arm/versatile: Fix versatile irq specifications.

2013-10-28 16:50:11 -07:00

vexpress-v2m-rs1.dtsi

…

vexpress-v2m.dtsi

…

vexpress-v2p-ca5s.dts

ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms

2013-04-11 03:01:03 -07:00

vexpress-v2p-ca9.dts

ARM: dts: vexpress: disable CA9 core tile sp804 timer

2013-04-11 15:11:19 -05:00

vexpress-v2p-ca15_a7.dts

ARM: SoC late changes for v3.12

2013-09-09 16:35:29 -07:00

vexpress-v2p-ca15-tc1.dts

ARM: vexpress: Remove A9 PMU compatible values for non-A9 platforms

2013-04-11 03:01:03 -07:00

vf610-cosmic.dts

ARM: dts: add initial VF610 Cosmic/Cosmic+ board support

2013-09-26 13:01:38 +08:00

vf610-pinfunc.h

ARM: dts: add SoC level device tree source for VF610

2013-06-17 16:04:23 +08:00

vf610-twr.dts

ARM: dts: vf610-twr: Enable DSPI0 devices and Flash at26df081a

2013-09-26 13:01:33 +08:00

vf610.dtsi

ARM: dts: vf610: Add DSPI nodes

2013-09-26 13:01:33 +08:00

vt8500-bv07.dts

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

vt8500.dtsi

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

wm8505-ref.dts

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

wm8505.dtsi

dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files

2013-05-12 20:31:15 +12:00

wm8650-mid.dts

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

wm8650.dtsi

dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files

2013-05-12 20:31:15 +12:00

wm8750-apc8750.dts

dts: vt8500: Update serial nodes and disable by default in SoC files

2013-05-12 20:31:13 +12:00

wm8750.dtsi

dts: vt8500: Add ARM, AHB, APB and DDR clock nodes to SoC files

2013-05-12 20:31:15 +12:00

wm8850-w70v2.dts

ARM: dts: Use the PWM polarity flags

2013-09-03 13:08:11 +02:00

wm8850.dtsi

dts: vt8500: Correct reference clock on WM8850 SoCs

2013-06-04 07:31:22 +12:00

xenvm-4.2.dts

xenvm: add a simple PSCI node and a second cpu

2013-04-25 16:46:09 +00:00

zynq-7000.dtsi

arm: zynq: Enable arm_global_timer

2013-10-02 11:34:28 +02:00

zynq-zc702.dts

arm: dt: zynq: Use 'status' property for UART nodes

2013-06-17 10:32:39 +02:00

zynq-zc706.dts

arm: dt: zynq: Add support for the zc706 platform

2013-06-17 10:32:51 +02:00

zynq-zed.dts

arm: dt: zynq: Add support for the zed platform

2013-06-17 10:33:03 +02:00