[ Upstream commit 9b459804ff9973e173fabafba2a1319f771e85fa ]
btf_datasec_resolve contains a bug that causes the following BTF
to fail loading:
[1] DATASEC a size=2 vlen=2
type_id=4 offset=0 size=1
type_id=7 offset=1 size=1
[2] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
[3] PTR (anon) type_id=2
[4] VAR a type_id=3 linkage=0
[5] INT (anon) size=1 bits_offset=0 nr_bits=8 encoding=(none)
[6] TYPEDEF td type_id=5
[7] VAR b type_id=6 linkage=0
This error message is printed during btf_check_all_types:
[1] DATASEC a size=2 vlen=2
type_id=7 offset=1 size=1 Invalid type
By tracing btf_*_resolve we can pinpoint the problem:
btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_TBD) = 0
btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_TBD) = 0
btf_ptr_resolve(depth: 3, type_id: 3, mode: RESOLVE_PTR) = 0
btf_var_resolve(depth: 2, type_id: 4, mode: RESOLVE_PTR) = 0
btf_datasec_resolve(depth: 1, type_id: 1, mode: RESOLVE_PTR) = -22
The last invocation of btf_datasec_resolve should invoke btf_var_resolve
by means of env_stack_push, instead it returns EINVAL. The reason is that
env_stack_push is never executed for the second VAR.
if (!env_type_is_resolve_sink(env, var_type) &&
!env_type_is_resolved(env, var_type_id)) {
env_stack_set_next_member(env, i + 1);
return env_stack_push(env, var_type, var_type_id);
}
env_type_is_resolve_sink() changes its behaviour based on resolve_mode.
For RESOLVE_PTR, we can simplify the if condition to the following:
(btf_type_is_modifier() || btf_type_is_ptr) && !env_type_is_resolved()
Since we're dealing with a VAR the clause evaluates to false. This is
not sufficient to trigger the bug however. The log output and EINVAL
are only generated if btf_type_id_size() fails.
if (!btf_type_id_size(btf, &type_id, &type_size)) {
btf_verifier_log_vsi(env, v->t, vsi, "Invalid type");
return -EINVAL;
}
Most types are sized, so for example a VAR referring to an INT is not a
problem. The bug is only triggered if a VAR points at a modifier. Since
we skipped btf_var_resolve that modifier was also never resolved, which
means that btf_resolved_type_id returns 0 aka VOID for the modifier.
This in turn causes btf_type_id_size to return NULL, triggering EINVAL.
To summarise, the following conditions are necessary:
- VAR pointing at PTR, STRUCT, UNION or ARRAY
- Followed by a VAR pointing at TYPEDEF, VOLATILE, CONST, RESTRICT or
TYPE_TAG
The fix is to reset resolve_mode to RESOLVE_TBD before attempting to
resolve a VAR from a DATASEC.
Fixes: 1dc9285184 ("bpf: kernel side support for BTF Var and DataSec")
Signed-off-by: Lorenz Bauer <lmb@isovalent.com>
Link: https://lore.kernel.org/r/20230306112138.155352-2-lmb@isovalent.com
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a402f1e35313fc7ce2ca60f543c4402c2c7c3544 upstream.
Currently, calling clone3() with CLONE_NEWTIME in clone_args->flags
fails with -EINVAL. This is because CLONE_NEWTIME intersects with
CSIGNAL. However, CSIGNAL was deprecated when clone3 was introduced in
commit 7f192e3cd3 ("fork: add clone3"), allowing re-use of that part
of clone flags.
Fix this by explicitly allowing CLONE_NEWTIME in clone3_args_valid. This
is also in line with the respective check in check_unshare_flags which
allow CLONE_NEWTIME for unshare().
Fixes: 769071ac9f ("ns: Introduce Time Namespace")
Cc: Andrey Vagin <avagin@openvz.org>
Cc: Christian Brauner <brauner@kernel.org>
Cc: stable@vger.kernel.org
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Reviewed-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Christian Brauner (Microsoft) <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2bb3669f576559db273efe49e0e69f82450efbca ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Andrew Morton <akpm@linux-foundation.org>
Reviewed-by: Yang Yingliang <yangyingliang@huawei.com>
Link: https://lore.kernel.org/r/20230202151633.2310897-1-gregkh@linuxfoundation.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 55bf243c514553e907efcf2bda92ba090eca8c64 ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Chris Down <chris@chrisdown.name>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Sergey Senozhatsky <senozhatsky@chromium.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: John Ogness <john.ogness@linutronix.de>
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Reviewed-by: John Ogness <john.ogness@linutronix.de>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Signed-off-by: Petr Mladek <pmladek@suse.com>
Link: https://lore.kernel.org/r/20230202151411.2308576-1-gregkh@linuxfoundation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3e4272b9954094907f16861199728f14002fcaf6 ]
In a previous commit 7433632c9f, buffer, buffer->buffers and
buffer->buffers[cpu] in ring_buffer_wake_waiters() can be NULL,
and thus the related checks are added.
However, in the same call stack, these variables are also used in
ring_buffer_free_read_page():
tracing_buffers_release()
ring_buffer_wake_waiters(iter->array_buffer->buffer)
cpu_buffer = buffer->buffers[cpu] -> Add checks by previous commit
ring_buffer_free_read_page(iter->array_buffer->buffer)
cpu_buffer = buffer->buffers[cpu] -> No check
Thus, to avod possible null-pointer derefernces, the related checks
should be added.
These results are reported by a static tool designed by myself.
Link: https://lkml.kernel.org/r/20230113125501.760324-1-baijiaju1990@gmail.com
Reported-by: TOTE Robot <oslab@tsinghua.edu.cn>
Signed-off-by: Jia-Ju Bai <baijiaju1990@gmail.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit feabecaff5902f896531dde90646ca5dfa9d4f7d ]
If ipi_send_{mask|single}() is called with an invalid interrupt number, all
the local variables there will be NULL. ipi_send_verify() which is invoked
from these functions does verify its 'data' parameter, resulting in a
kernel oops in irq_data_get_affinity_mask() as the passed NULL pointer gets
dereferenced.
Add a missing NULL pointer check in ipi_send_verify()...
Found by Linux Verification Center (linuxtesting.org) with the SVACE static
analysis tool.
Fixes: 3b8e29a82d ("genirq: Implement ipi_send_mask/single()")
Signed-off-by: Sergey Shtylyov <s.shtylyov@omp.ru>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/b541232d-c2b6-1fe9-79b4-a7129459e4d0@omp.ru
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee7dc86b6d3e3b86c2c487f713eda657850de238 upstream.
Sbitmap code will need to know how many waiters were actually woken for
its batched wakeups implementation. Return the number of woken
exclusive waiters from __wake_up() to facilitate that.
Suggested-by: Jan Kara <jack@suse.cz>
Signed-off-by: Gabriel Krisman Bertazi <krisman@suse.de>
Reviewed-by: Jan Kara <jack@suse.cz>
Link: https://lore.kernel.org/r/20221115224553.23594-3-krisman@suse.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 133921530c42960c07d25d12677f9e131a2b0cdf upstream.
Fix to add a description of the filter on eprobe in README file. This
is required to identify the kernel supports the filter on eprobe or not.
Link: https://lore.kernel.org/all/167309833728.640500.12232259238201433587.stgit@devnote3/
Fixes: 752be5c5c9 ("tracing/eprobe: Add eprobe filter support")
Cc: stable@vger.kernel.org
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8843e06f67b14f71c044bf6267b2387784c7e198 upstream.
It seems a data race between ring_buffer writing and integrity check.
That is, RB_FLAG of head_page is been updating, while at same time
RB_FLAG was cleared when doing integrity check rb_check_pages():
rb_check_pages() rb_handle_head_page():
-------- --------
rb_head_page_deactivate()
rb_head_page_set_normal()
rb_head_page_activate()
We do intergrity test of the list to check if the list is corrupted and
it is still worth doing it. So, let's refactor rb_check_pages() such that
we no longer clear and set flag during the list sanity checking.
[1] and [2] are the test to reproduce and the crash report respectively.
1:
``` read_trace.sh
while true;
do
# the "trace" file is closed after read
head -1 /sys/kernel/tracing/trace > /dev/null
done
```
``` repro.sh
sysctl -w kernel.panic_on_warn=1
# function tracer will writing enough data into ring_buffer
echo function > /sys/kernel/tracing/current_tracer
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
./read_trace.sh &
```
2:
------------[ cut here ]------------
WARNING: CPU: 9 PID: 62 at kernel/trace/ring_buffer.c:2653
rb_move_tail+0x450/0x470
Modules linked in:
CPU: 9 PID: 62 Comm: ksoftirqd/9 Tainted: G W 6.2.0-rc6+
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS
rel-1.15.0-0-g2dd4b9b3f840-prebuilt.qemu.org 04/01/2014
RIP: 0010:rb_move_tail+0x450/0x470
Code: ff ff 4c 89 c8 f0 4d 0f b1 02 48 89 c2 48 83 e2 fc 49 39 d0 75 24
83 e0 03 83 f8 02 0f 84 e1 fb ff ff 48 8b 57 10 f0 ff 42 08 <0f> 0b 83
f8 02 0f 84 ce fb ff ff e9 db
RSP: 0018:ffffb5564089bd00 EFLAGS: 00000203
RAX: 0000000000000000 RBX: ffff9db385a2bf81 RCX: ffffb5564089bd18
RDX: ffff9db281110100 RSI: 0000000000000fe4 RDI: ffff9db380145400
RBP: ffff9db385a2bf80 R08: ffff9db385a2bfc0 R09: ffff9db385a2bfc2
R10: ffff9db385a6c000 R11: ffff9db385a2bf80 R12: 0000000000000000
R13: 00000000000003e8 R14: ffff9db281110100 R15: ffffffffbb006108
FS: 0000000000000000(0000) GS:ffff9db3bdcc0000(0000)
knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00005602323024c8 CR3: 0000000022e0c000 CR4: 00000000000006e0
Call Trace:
<TASK>
ring_buffer_lock_reserve+0x136/0x360
? __do_softirq+0x287/0x2df
? __pfx_rcu_softirq_qs+0x10/0x10
trace_function+0x21/0x110
? __pfx_rcu_softirq_qs+0x10/0x10
? __do_softirq+0x287/0x2df
function_trace_call+0xf6/0x120
0xffffffffc038f097
? rcu_softirq_qs+0x5/0x140
rcu_softirq_qs+0x5/0x140
__do_softirq+0x287/0x2df
run_ksoftirqd+0x2a/0x30
smpboot_thread_fn+0x188/0x220
? __pfx_smpboot_thread_fn+0x10/0x10
kthread+0xe7/0x110
? __pfx_kthread+0x10/0x10
ret_from_fork+0x2c/0x50
</TASK>
---[ end trace 0000000000000000 ]---
[ crash report and test reproducer credit goes to Zheng Yejian]
Link: https://lore.kernel.org/linux-trace-kernel/1676376403-16462-1-git-send-email-quic_mojha@quicinc.com
Cc: <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Fixes: 1039221cc2 ("ring-buffer: Do not disable recording when there is an iterator")
Reported-by: Zheng Yejian <zhengyejian1@huawei.com>
Signed-off-by: Mukesh Ojha <quic_mojha@quicinc.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 4fbd2f83fda0ca44a2ec6421ca3508b355b31858 upstream.
Since forcibly unoptimized kprobes will be put on the freeing_list directly
in the unoptimize_kprobe(), do_unoptimize_kprobes() must continue to check
the freeing_list even if unoptimizing_list is empty.
This bug can happen if a kprobe is put in an instruction which is in the
middle of the jump-replaced instruction sequence of an optprobe, *and* the
optprobe is recently unregistered and queued on unoptimizing_list.
In this case, the optprobe will be unoptimized forcibly (means immediately)
and put it into the freeing_list, expecting the optprobe will be handled in
do_unoptimize_kprobe().
But if there is no other optprobes on the unoptimizing_list, current code
returns from the do_unoptimize_kprobe() soon and does not handle the
optprobe which is on the freeing_list. Then the optprobe will hit the
WARN_ON_ONCE() in the do_free_cleaned_kprobes(), because it is not handled
in the latter loop of the do_unoptimize_kprobe().
To solve this issue, do not return from do_unoptimize_kprobes() immediately
even if unoptimizing_list is empty.
Moreover, this change affects another case. kill_optimized_kprobes() expects
kprobe_optimizer() will just free the optprobe on freeing_list.
So I changed it to just do list_move() to freeing_list if optprobes are on
unoptimizing list. And the do_unoptimize_kprobe() will skip
arch_disarm_kprobe() if the probe on freeing_list has gone flag.
Link: https://lore.kernel.org/all/Y8URdIfVr3pq2X8w@xpf.sh.intel.com/
Link: https://lore.kernel.org/all/167448024501.3253718.13037333683110512967.stgit@devnote3/
Fixes: e4add24778 ("kprobes: Fix optimize_kprobe()/unoptimize_kprobe() cancellation logic")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Cc: stable@vger.kernel.org
Acked-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e686c32590f40bffc45f105c04c836ffad3e531a upstream.
While experimenting with CXL region removal the following corruption of
/proc/iomem appeared.
Before:
f010000000-f04fffffff : CXL Window 0
f010000000-f02fffffff : region4
f010000000-f02fffffff : dax4.0
f010000000-f02fffffff : System RAM (kmem)
After (modprobe -r cxl_test):
f010000000-f02fffffff : **redacted binary garbage**
f010000000-f02fffffff : System RAM (kmem)
...and testing further the same is visible with persistent memory
assigned to kmem:
Before:
480000000-243fffffff : Persistent Memory
480000000-57e1fffff : namespace3.0
580000000-243fffffff : dax3.0
580000000-243fffffff : System RAM (kmem)
After (ndctl disable-region all):
480000000-243fffffff : Persistent Memory
580000000-243fffffff : ***redacted binary garbage***
580000000-243fffffff : System RAM (kmem)
The corrupted data is from a use-after-free of the "dax4.0" and "dax3.0"
resources, and it also shows that the "System RAM (kmem)" resource is
not being removed. The bug does not appear after "modprobe -r kmem", it
requires the parent of "dax4.0" and "dax3.0" to be removed which
re-parents the leaked "System RAM (kmem)" instances. Those in turn
reference the freed resource as a parent.
First up for the fix is release_mem_region_adjustable() needs to
reliably delete the resource inserted by add_memory_driver_managed().
That is thwarted by a check for IORESOURCE_SYSRAM that predates the
dax/kmem driver, from commit:
65c7878413 ("kernel, resource: check for IORESOURCE_SYSRAM in release_mem_region_adjustable")
That appears to be working around the behavior of HMM's
"MEMORY_DEVICE_PUBLIC" facility that has since been deleted. With that
check removed the "System RAM (kmem)" resource gets removed, but
corruption still occurs occasionally because the "dax" resource is not
reliably removed.
The dax range information is freed before the device is unregistered, so
the driver can not reliably recall (another use after free) what it is
meant to release. Lastly if that use after free got lucky, the driver
was covering up the leak of "System RAM (kmem)" due to its use of
release_resource() which detaches, but does not free, child resources.
The switch to remove_resource() forces remove_memory() to be responsible
for the deletion of the resource added by add_memory_driver_managed().
Fixes: c2f3011ee6 ("device-dax: add an allocation interface for device-dax instances")
Cc: <stable@vger.kernel.org>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: David Hildenbrand <david@redhat.com>
Cc: Pavel Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Vishal Verma <vishal.l.verma@intel.com>
Reviewed-by: Pasha Tatashin <pasha.tatashin@soleen.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/167653656244.3147810.5705900882794040229.stgit@dwillia2-xfh.jf.intel.com
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b905039e428d639adeebb719b76f98865ea38d4d upstream.
Commit 8d470a45d1 ("panic: add option to dump all CPUs backtraces in
panic_print") introduced a setting for the "panic_print" kernel parameter
to allow users to request a NMI backtrace on panic. Problem is that the
panic_print handling happens after the secondary CPUs are already
disabled, hence this option ended-up being kind of a no-op - kernel skips
the NMI trace in idling CPUs, which is the case of offline CPUs.
Fix it by checking the NMI backtrace bit in the panic_print prior to the
CPU disabling function.
Link: https://lkml.kernel.org/r/20230226160838.414257-1-gpiccoli@igalia.com
Fixes: 8d470a45d1 ("panic: add option to dump all CPUs backtraces in panic_print")
Signed-off-by: Guilherme G. Piccoli <gpiccoli@igalia.com>
Cc: <stable@vger.kernel.org>
Cc: Baoquan He <bhe@redhat.com>
Cc: Dave Young <dyoung@redhat.com>
Cc: Feng Tang <feng.tang@intel.com>
Cc: HATAYAMA Daisuke <d.hatayama@jp.fujitsu.com>
Cc: Hidehiro Kawai <hidehiro.kawai.ez@hitachi.com>
Cc: Kees Cook <keescook@chromium.org>
Cc: Michael Kelley <mikelley@microsoft.com>
Cc: Petr Mladek <pmladek@suse.com>
Cc: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8932c32c3053accd50702b36e944ac2016cd103c upstream.
Hierarchical domains created using irq_domain_create_hierarchy() are
currently added to the domain list before having been fully initialised.
This specifically means that a racing allocation request might fail to
allocate irq data for the inner domains of a hierarchy in case the
parent domain pointer has not yet been set up.
Note that this is not really any issue for irqchip drivers that are
registered early (e.g. via IRQCHIP_DECLARE() or IRQCHIP_ACPI_DECLARE())
but could potentially cause trouble with drivers that are registered
later (e.g. modular drivers using IRQCHIP_PLATFORM_DRIVER_BEGIN(),
gpiochip drivers, etc.).
Fixes: afb7da83b9 ("irqdomain: Introduce helper function irq_domain_add_hierarchy()")
Cc: stable@vger.kernel.org # 3.19
Signed-off-by: Marc Zyngier <maz@kernel.org>
[ johan: add commit message ]
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-8-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 601363cc08da25747feb87c55573dd54de91d66a upstream.
Parallel probing of devices that share interrupts (e.g. when a driver
uses asynchronous probing) can currently result in two mappings for the
same hardware interrupt to be created due to missing serialisation.
Make sure to hold the irq_domain_mutex when creating mappings so that
looking for an existing mapping before creating a new one is done
atomically.
Fixes: 765230b5f0 ("driver-core: add asynchronous probing support for drivers")
Fixes: b62b2cf575 ("irqdomain: Fix handling of type settings for existing mappings")
Link: https://lore.kernel.org/r/YuJXMHoT4ijUxnRb@hovoldconsulting.com
Cc: stable@vger.kernel.org # 4.8
Cc: Dmitry Torokhov <dtor@chromium.org>
Cc: Jon Hunter <jonathanh@nvidia.com>
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-7-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d55f7f4c58c07beb5050a834bf57ae2ede599c7e upstream.
Refactor __irq_domain_alloc_irqs() so that it can be called internally
while holding the irq_domain_mutex.
This will be used to fix a shared-interrupt mapping race, hence the
Fixes tag.
Fixes: b62b2cf575 ("irqdomain: Fix handling of type settings for existing mappings")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-6-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3b7ab025e931accdc2c12acf9b75c6197f1c062 upstream.
In case a newly allocated IRQ ever ends up not having any associated
struct irq_data it would not even be possible to dispose the mapping.
Replace the bogus disposal with a WARN_ON().
This will also be used to fix a shared-interrupt mapping race, hence the
CC-stable tag.
Fixes: 1e2a7d7849 ("irqdomain: Don't set type when mapping an IRQ")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-4-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6e6f75c9c98d2d246d90411ff2b6f0cd271f4cba upstream.
Avoid looking for an existing mapping twice when creating a new mapping
using irq_create_fwspec_mapping() by factoring out the actual allocation
which is shared with irq_create_mapping_affinity().
The new helper function will also be used to fix a shared-interrupt
mapping race, hence the Fixes tag.
Fixes: b62b2cf575 ("irqdomain: Fix handling of type settings for existing mappings")
Cc: stable@vger.kernel.org # 4.8
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-5-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3f883c38f5628f46b30bccf090faec054088e262 upstream.
The global irq_domain_mutex is held when mapping interrupts from
non-hierarchical domains but currently not when disposing them.
This specifically means that updates of the domain mapcount is racy
(currently only used for statistics in debugfs).
Make sure to hold the global irq_domain_mutex also when disposing
mappings from non-hierarchical domains.
Fixes: 9dc6be3d41 ("genirq/irqdomain: Add map counter")
Cc: stable@vger.kernel.org # 4.13
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-3-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b06730a571a9ff1ba5bd6b20bf9e50e5a12f1ec6 upstream.
The sanity check for an already mapped virq is done outside of the
irq_domain_mutex-protected section which means that an (unlikely) racing
association may not be detected.
Fix this by factoring out the association implementation, which will
also be used in a follow-on change to fix a shared-interrupt mapping
race.
Fixes: ddaf144c61 ("irqdomain: Refactor irq_domain_associate_many()")
Cc: stable@vger.kernel.org # 3.11
Tested-by: Hsin-Yi Wang <hsinyi@chromium.org>
Tested-by: Mark-PK Tsai <mark-pk.tsai@mediatek.com>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20230213104302.17307-2-johan+linaro@kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f1c97a1b4ef709e3f066f82e3ba3108c3b133ae6 upstream.
When arch_prepare_optimized_kprobe calculating jump destination address,
it copies original instructions from jmp-optimized kprobe (see
__recover_optprobed_insn), and calculated based on length of original
instruction.
arch_check_optimized_kprobe does not check KPROBE_FLAG_OPTIMATED when
checking whether jmp-optimized kprobe exists.
As a result, setup_detour_execution may jump to a range that has been
overwritten by jump destination address, resulting in an inval opcode error.
For example, assume that register two kprobes whose addresses are
<func+9> and <func+11> in "func" function.
The original code of "func" function is as follows:
0xffffffff816cb5e9 <+9>: push %r12
0xffffffff816cb5eb <+11>: xor %r12d,%r12d
0xffffffff816cb5ee <+14>: test %rdi,%rdi
0xffffffff816cb5f1 <+17>: setne %r12b
0xffffffff816cb5f5 <+21>: push %rbp
1.Register the kprobe for <func+11>, assume that is kp1, corresponding optimized_kprobe is op1.
After the optimization, "func" code changes to:
0xffffffff816cc079 <+9>: push %r12
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
Now op1->flags == KPROBE_FLAG_OPTIMATED;
2. Register the kprobe for <func+9>, assume that is kp2, corresponding optimized_kprobe is op2.
register_kprobe(kp2)
register_aggr_kprobe
alloc_aggr_kprobe
__prepare_optimized_kprobe
arch_prepare_optimized_kprobe
__recover_optprobed_insn // copy original bytes from kp1->optinsn.copied_insn,
// jump address = <func+14>
3. disable kp1:
disable_kprobe(kp1)
__disable_kprobe
...
if (p == orig_p || aggr_kprobe_disabled(orig_p)) {
ret = disarm_kprobe(orig_p, true) // add op1 in unoptimizing_list, not unoptimized
orig_p->flags |= KPROBE_FLAG_DISABLED; // op1->flags == KPROBE_FLAG_OPTIMATED | KPROBE_FLAG_DISABLED
...
4. unregister kp2
__unregister_kprobe_top
...
if (!kprobe_disabled(ap) && !kprobes_all_disarmed) {
optimize_kprobe(op)
...
if (arch_check_optimized_kprobe(op) < 0) // because op1 has KPROBE_FLAG_DISABLED, here not return
return;
p->kp.flags |= KPROBE_FLAG_OPTIMIZED; // now op2 has KPROBE_FLAG_OPTIMIZED
}
"func" code now is:
0xffffffff816cc079 <+9>: int3
0xffffffff816cc07a <+10>: push %rsp
0xffffffff816cc07b <+11>: jmp 0xffffffffa0210000
0xffffffff816cc080 <+16>: incl 0xf(%rcx)
0xffffffff816cc083 <+19>: xchg %eax,%ebp
0xffffffff816cc084 <+20>: (bad)
0xffffffff816cc085 <+21>: push %rbp
5. if call "func", int3 handler call setup_detour_execution:
if (p->flags & KPROBE_FLAG_OPTIMIZED) {
...
regs->ip = (unsigned long)op->optinsn.insn + TMPL_END_IDX;
...
}
The code for the destination address is
0xffffffffa021072c: push %r12
0xffffffffa021072e: xor %r12d,%r12d
0xffffffffa0210731: jmp 0xffffffff816cb5ee <func+14>
However, <func+14> is not a valid start instruction address. As a result, an error occurs.
Link: https://lore.kernel.org/all/20230216034247.32348-3-yangjihong1@huawei.com/
Fixes: f66c0447cc ("kprobes: Set unoptimized flag after unoptimizing code")
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Cc: stable@vger.kernel.org
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 868a6fc0ca2407622d2833adefe1c4d284766c4c upstream.
Since the following commit:
commit f66c0447cc ("kprobes: Set unoptimized flag after unoptimizing code")
modified the update timing of the KPROBE_FLAG_OPTIMIZED, a optimized_kprobe
may be in the optimizing or unoptimizing state when op.kp->flags
has KPROBE_FLAG_OPTIMIZED and op->list is not empty.
The __recover_optprobed_insn check logic is incorrect, a kprobe in the
unoptimizing state may be incorrectly determined as unoptimizing.
As a result, incorrect instructions are copied.
The optprobe_queued_unopt function needs to be exported for invoking in
arch directory.
Link: https://lore.kernel.org/all/20230216034247.32348-2-yangjihong1@huawei.com/
Fixes: f66c0447cc ("kprobes: Set unoptimized flag after unoptimizing code")
Cc: stable@vger.kernel.org
Signed-off-by: Yang Jihong <yangjihong1@huawei.com>
Acked-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Masami Hiramatsu (Google) <mhiramat@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d52d3a2bf408ff86f3a79560b5cce80efb340239 upstream.
During rcutorture shutdown, the rcu_torture_cleanup() function calls
torture_cleanup_begin(), which sets the fullstop global variable to
FULLSTOP_RMMOD. This causes the rcutorture threads for readers and
fakewriters to exit all of their "while" loops and start shutting down.
They then call torture_kthread_stopping(), which in turn waits for
kthread_stop() to be called. However, rcu_torture_cleanup() has
not yet called kthread_stop() on those threads, and before it gets a
chance to do so, multiple instances of torture_kthread_stopping() invoke
schedule_timeout_interruptible(1) in a tight loop. Tracing confirms that
TIMER_SOFTIRQ can then continuously execute timer callbacks. If that
TIMER_SOFTIRQ preempts the task executing rcu_torture_cleanup(), that
task might never invoke kthread_stop().
This commit improves this situation by increasing the timeout passed to
schedule_timeout_interruptible() from one jiffy to 1/20th of a second.
This change prevents TIMER_SOFTIRQ from monopolizing its CPU, thus
allowing rcu_torture_cleanup() to carry out the needed kthread_stop()
invocations. Testing has shown 100 runs of TREE07 passing reliably,
as oppose to the tens-of-percent failure rates seen beforehand.
Cc: Paul McKenney <paulmck@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Zhouyi Zhou <zhouzhouyi@gmail.com>
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joel Fernandes (Google) <joel@joelfernandes.org>
Tested-by: Zhouyi Zhou <zhouzhouyi@gmail.com>
Reviewed-by: Davidlohr Bueso <dave@stgolabs.net>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b613c7f31476c44316bfac1af7cac714b7d6bef9 upstream.
A non-first waiter can potentially spin in the for loop of
rwsem_down_write_slowpath() without sleeping but fail to acquire the
lock even if the rwsem is free if the following sequence happens:
Non-first RT waiter First waiter Lock holder
------------------- ------------ -----------
Acquire wait_lock
rwsem_try_write_lock():
Set handoff bit if RT or
wait too long
Set waiter->handoff_set
Release wait_lock
Acquire wait_lock
Inherit waiter->handoff_set
Release wait_lock
Clear owner
Release lock
if (waiter.handoff_set) {
rwsem_spin_on_owner(();
if (OWNER_NULL)
goto trylock_again;
}
trylock_again:
Acquire wait_lock
rwsem_try_write_lock():
if (first->handoff_set && (waiter != first))
return false;
Release wait_lock
A non-first waiter cannot really acquire the rwsem even if it mistakenly
believes that it can spin on OWNER_NULL value. If that waiter happens
to be an RT task running on the same CPU as the first waiter, it can
block the first waiter from acquiring the rwsem leading to live lock.
Fix this problem by making sure that a non-first waiter cannot spin in
the slowpath loop without sleeping.
Fixes: d257cc8cb8 ("locking/rwsem: Make handoff bit handling more consistent")
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Tested-by: Mukesh Ojha <quic_mojha@quicinc.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/20230126003628.365092-2-longman@redhat.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit a0e8c13ccd6a9a636d27353da62c2410c4eca337 ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5b268d8abaec6cbd4bd70d062e769098d96670aa ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic at
once.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230202151214.2306822-1-gregkh@linuxfoundation.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit b7082cdfc464bf9231300605d03eebf943dda307 ]
Bugs have been reported on 8 sockets x86 machines in which the TSC was
wrongly disabled when the system is under heavy workload.
[ 818.380354] clocksource: timekeeping watchdog on CPU336: hpet wd-wd read-back delay of 1203520ns
[ 818.436160] clocksource: wd-tsc-wd read-back delay of 181880ns, clock-skew test skipped!
[ 819.402962] clocksource: timekeeping watchdog on CPU338: hpet wd-wd read-back delay of 324000ns
[ 819.448036] clocksource: wd-tsc-wd read-back delay of 337240ns, clock-skew test skipped!
[ 819.880863] clocksource: timekeeping watchdog on CPU339: hpet read-back delay of 150280ns, attempt 3, marking unstable
[ 819.936243] tsc: Marking TSC unstable due to clocksource watchdog
[ 820.068173] TSC found unstable after boot, most likely due to broken BIOS. Use 'tsc=unstable'.
[ 820.092382] sched_clock: Marking unstable (818769414384, 1195404998)
[ 820.643627] clocksource: Checking clocksource tsc synchronization from CPU 267 to CPUs 0,4,25,70,126,430,557,564.
[ 821.067990] clocksource: Switched to clocksource hpet
This can be reproduced by running memory intensive 'stream' tests,
or some of the stress-ng subcases such as 'ioport'.
The reason for these issues is the when system is under heavy load, the
read latency of the clocksources can be very high. Even lightweight TSC
reads can show high latencies, and latencies are much worse for external
clocksources such as HPET or the APIC PM timer. These latencies can
result in false-positive clocksource-unstable determinations.
These issues were initially reported by a customer running on a production
system, and this problem was reproduced on several generations of Xeon
servers, especially when running the stress-ng test. These Xeon servers
were not production systems, but they did have the latest steppings
and firmware.
Given that the clocksource watchdog is a continual diagnostic check with
frequency of twice a second, there is no need to rush it when the system
is under heavy load. Therefore, when high clocksource read latencies
are detected, suspend the watchdog timer for 5 minutes.
Signed-off-by: Feng Tang <feng.tang@intel.com>
Acked-by: Waiman Long <longman@redhat.com>
Cc: John Stultz <jstultz@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Stephen Boyd <sboyd@kernel.org>
Cc: Feng Tang <feng.tang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9f76d59173d9d146e96c66886b671c1915a5c5e5 ]
The nanosleep syscalls use the restart_block mechanism, with a quirk:
The `type` and `rmtp`/`compat_rmtp` fields are set up unconditionally on
syscall entry, while the rest of the restart_block is only set up in the
unlikely case that the syscall is actually interrupted by a signal (or
pseudo-signal) that doesn't have a signal handler.
If the restart_block was set up by a previous syscall (futex(...,
FUTEX_WAIT, ...) or poll()) and hasn't been invalidated somehow since then,
this will clobber some of the union fields used by futex_wait_restart() and
do_restart_poll().
If userspace afterwards wrongly calls the restart_syscall syscall,
futex_wait_restart()/do_restart_poll() will read struct fields that have
been clobbered.
This doesn't actually lead to anything particularly interesting because
none of the union fields contain trusted kernel data, and
futex(..., FUTEX_WAIT, ...) and poll() aren't syscalls where it makes much
sense to apply seccomp filters to their arguments.
So the current consequences are just of the "if userspace does bad stuff,
it can damage itself, and that's not a problem" flavor.
But still, it seems like a hazard for future developers, so invalidate the
restart_block when partly setting it up in the nanosleep syscalls.
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/20230105134403.754986-1-jannh@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a4fcfbee8f6274f9b3f9a71dd5b03e6772ce33f3 ]
The rcu_tasks_need_gpcb() determines whether or not: (1) There are
callbacks needing another grace period, (2) There are callbacks ready
to be invoked, and (3) It would be a good time to shrink back down to a
single-CPU callback list. This third case is interesting because some
other CPU might be adding new callbacks, which might suddenly make this
a very bad time to be shrinking.
This is currently handled by requiring call_rcu_tasks_generic() to
enqueue callbacks under the protection of rcu_read_lock() and requiring
rcu_tasks_need_gpcb() to wait for an RCU grace period to elapse before
finalizing the transition. This works well in practice.
Unfortunately, the current code assumes that a grace period whose end is
detected by the poll_state_synchronize_rcu() in the second "if" condition
actually ended before the earlier code counted the callbacks queued on
CPUs other than CPU 0 (local variable "ncbsnz"). Given the current code,
it is possible that a long-delayed call_rcu_tasks_generic() invocation
will queue a callback on a non-zero CPU after these CPUs have had their
callbacks counted and zero has been stored to ncbsnz. Such a callback
would trigger the WARN_ON_ONCE() in the second "if" statement.
To see this, consider the following sequence of events:
o CPU 0 invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It sees at least one
callback queued on some other CPU, thus setting ncbsnz
to a non-zero value.
o CPU 1 invokes call_rcu_tasks_generic() and loads 42 from
->percpu_enqueue_lim. It therefore decides to enqueue its
callback onto CPU 1's callback list, but is delayed.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, and sees that its value is greater
than the value one. CPU 0 therefore starts the shift back
to a single callback list. It sets ->percpu_enqueue_lim to 1,
but CPU 1 has already read the old value of 42. It also gets
a grace-period state value from get_state_synchronize_rcu().
o CPU 0 sees that ncbsnz is non-zero in its second "if" statement,
so it declines to finalize the shrink operation.
o CPU 0 again invokes rcu_tasks_one_gp(), and counts fewer than
rcu_task_collapse_lim callbacks. It also sees that there are
no callback queued on any other CPU, and thus sets ncbsnz to zero.
o CPU 1 resumes execution and enqueues its callback onto its own
list. This invalidates the value of ncbsnz.
o CPU 0 sees the rcu_task_cb_adjust is non-zero and that the number
of callbacks does not exceed rcu_task_collapse_lim. It therefore
checks percpu_enqueue_lim, but sees that its value is already
unity. It therefore does not get a new grace-period state value.
o CPU 0 sees that rcu_task_cb_adjust is non-zero, ncbsnz is zero,
and that poll_state_synchronize_rcu() says that the grace period
has completed. it therefore finalizes the shrink operation,
setting ->percpu_dequeue_lim to the value one.
o CPU 0 does a debug check, scanning the other CPUs' callback lists.
It sees that CPU 1's list has a callback, so it (rightly)
triggers the WARN_ON_ONCE(). After all, the new value of
->percpu_dequeue_lim says to not bother looking at CPU 1's
callback list, which means that this callback will never be
invoked. This can result in hangs and maybe even OOMs.
Based on long experience with rcutorture, this is an extremely
low-probability race condition, but it really can happen, especially in
preemptible kernels or within guest OSes.
This commit therefore checks for completion of the grace period
before counting callbacks. With this change, in the above failure
scenario CPU 0 would know not to prematurely end the shrink operation
because the grace period would not have completed before the count
operation started.
[ paulmck: Adjust grace-period end rather than adding RCU reader. ]
[ paulmck: Avoid spurious WARN_ON_ONCE() with ->percpu_dequeue_lim check. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ea5c8987fef20a8cca07e428aa28bc64649c5104 ]
The synchronize_rcu_tasks_rude() function invokes rcu_tasks_rude_wait_gp()
to wait one rude RCU-tasks grace period. The rcu_tasks_rude_wait_gp()
function in turn checks if there is only a single online CPU. If so, it
will immediately return, because a call to synchronize_rcu_tasks_rude()
is by definition a grace period on a single-CPU system. (We could
have blocked!)
Unfortunately, this check uses num_online_cpus() without synchronization,
which can result in too-short grace periods. To see this, consider the
following scenario:
CPU0 CPU1 (going offline)
migration/1 task:
cpu_stopper_thread
-> take_cpu_down
-> _cpu_disable
(dec __num_online_cpus)
->cpuhp_invoke_callback
preempt_disable
access old_data0
task1
del old_data0 .....
synchronize_rcu_tasks_rude()
task1 schedule out
....
task2 schedule in
rcu_tasks_rude_wait_gp()
->__num_online_cpus == 1
->return
....
task1 schedule in
->free old_data0
preempt_enable
When CPU1 decrements __num_online_cpus, its value becomes 1. However,
CPU1 has not finished going offline, and will take one last trip through
the scheduler and the idle loop before it actually stops executing
instructions. Because synchronize_rcu_tasks_rude() is mostly used for
tracing, and because both the scheduler and the idle loop can be traced,
this means that CPU0's prematurely ended grace period might disrupt the
tracing on CPU1. Given that this disruption might include CPU1 executing
instructions in memory that was just now freed (and maybe reallocated),
this is a matter of some concern.
This commit therefore removes that problematic single-CPU check from the
rcu_tasks_rude_wait_gp() function. This dispenses with the single-CPU
optimization, but there is no evidence indicating that this optimization
is important. In addition, synchronize_rcu_tasks_generic() contains a
similar optimization (albeit only for early boot), which also splats.
(As in exactly why are you invoking synchronize_rcu_tasks_rude() so
early in boot, anyway???)
It is OK for the synchronize_rcu_tasks_rude() function's check to be
unsynchronized because the only times that this check can evaluate to
true is when there is only a single CPU running with preemption
disabled.
While in the area, this commit also fixes a minor bug in which a
call to synchronize_rcu_tasks_rude() would instead be attributed to
synchronize_rcu_tasks().
[ paulmck: Add "synchronize_" prefix and "()" suffix. ]
Signed-off-by: Zqiang <qiang1.zhang@intel.com>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d7f00b2f01301d6e41fd4a28030dab0442265be ]
The normal grace period's RCU CPU stall warnings are invoked from the
scheduling-clock interrupt handler, and can thus invoke smp_processor_id()
with impunity, which allows them to directly invoke dump_cpu_task().
In contrast, the expedited grace period's RCU CPU stall warnings are
invoked from process context, which causes the dump_cpu_task() function's
calls to smp_processor_id() to complain bitterly in debug kernels.
This commit therefore causes synchronize_rcu_expedited_wait() to disable
preemption around its call to dump_cpu_task().
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 5a5d7e9badd2cb8065db171961bd30bd3595e4b6 ]
In order to avoid WARN/BUG from generating nested or even recursive
warnings, force rcu_is_watching() true during
WARN/lockdep_rcu_suspicious().
Notably things like unwinding the stack can trigger rcu_dereference()
warnings, which then triggers more unwinding which then triggers more
warnings etc..
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126151323.408156109@infradead.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83e8864fee26f63a7435e941b7c36a20fd6fe93e ]
When calling debugfs_lookup() the result must have dput() called on it,
otherwise the memory will leak over time. To make things simpler, just
call debugfs_lookup_and_remove() instead which handles all of the logic
at once.
Cc: Jens Axboe <axboe@kernel.dk>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: linux-block@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Cc: linux-trace-kernel@vger.kernel.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Reviewed-by: Bart Van Assche <bvanassche@acm.org>
Link: https://lore.kernel.org/r/20230202141956.2299521-1-gregkh@linuxfoundation.org
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 001c28e57187570e4b5aa4492c7a957fb6d65d7b ]
If a task oopses with irqs disabled, this can cause various cascading
problems in the oops path such as sleep-from-invalid warnings, and
potentially worse.
Since commit 0258b5fd7c ("coredump: Limit coredumps to a single
thread group"), the unconditional irq enable in coredump_task_exit()
will "fix" the irq state to be enabled early in do_exit(), so currently
this may not be triggerable, but that is coincidental and fragile.
Detect and fix the irqs_disabled() condition in the oops path before
calling do_exit(), similarly to the way in_atomic() is handled.
Reported-by: Michael Ellerman <mpe@ellerman.id.au>
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: "Eric W. Biederman" <ebiederm@xmission.com>
Link: https://lore.kernel.org/lkml/20221004094401.708299-1-npiggin@gmail.com/
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit d384dce281ed1b504fae2e279507827638d56fa3 ]
KPROBE program's user-facing context type is defined as typedef
bpf_user_pt_regs_t. This leads to a problem when trying to passing
kprobe/uprobe/usdt context argument into global subprog, as kernel
always strip away mods and typedefs of user-supplied type, but takes
expected type from bpf_ctx_convert as is, which causes mismatch.
Current way to work around this is to define a fake struct with the same
name as expected typedef:
struct bpf_user_pt_regs_t {};
__noinline my_global_subprog(struct bpf_user_pt_regs_t *ctx) { ... }
This patch fixes the issue by resolving expected type, if it's not
a struct. It still leaves the above work-around working for backwards
compatibility.
Fixes: 91cc1a9974 ("bpf: Annotate context types")
Signed-off-by: Andrii Nakryiko <andrii@kernel.org>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>
Acked-by: Stanislav Fomichev <sdf@google.com>
Link: https://lore.kernel.org/bpf/20230216045954.3002473-2-andrii@kernel.org
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 997849c4b969034e225153f41026657def66d286 ]
Currently the freed element in bpf memory allocator may be immediately
reused, for htab map the reuse will reinitialize special fields in map
value (e.g., bpf_spin_lock), but lookup procedure may still access
these special fields, and it may lead to hard-lockup as shown below:
NMI backtrace for cpu 16
CPU: 16 PID: 2574 Comm: htab.bin Tainted: G L 6.1.0+ #1
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996),
RIP: 0010:queued_spin_lock_slowpath+0x283/0x2c0
......
Call Trace:
<TASK>
copy_map_value_locked+0xb7/0x170
bpf_map_copy_value+0x113/0x3c0
__sys_bpf+0x1c67/0x2780
__x64_sys_bpf+0x1c/0x20
do_syscall_64+0x30/0x60
entry_SYSCALL_64_after_hwframe+0x46/0xb0
......
</TASK>
For htab map, just like the preallocated case, these is no need to
initialize these special fields in map value again once these fields
have been initialized. For preallocated htab map, these fields are
initialized through __GFP_ZERO in bpf_map_area_alloc(), so do the
similar thing for non-preallocated htab in bpf memory allocator. And
there is no need to use __GFP_ZERO for per-cpu bpf memory allocator,
because __alloc_percpu_gfp() does it implicitly.
Fixes: 0fd7c5d433 ("bpf: Optimize call_rcu in non-preallocated hash map.")
Signed-off-by: Hou Tao <houtao1@huawei.com>
Link: https://lore.kernel.org/r/20230215082132.3856544-2-houtao@huaweicloud.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 99c621ef243bda726fb8d982a274ded96570b410 ]
When unbind_workers() reads wq_unbound_cpumask to set the affinity of
freshly-unbound kworkers, it only holds wq_pool_attach_mutex. This isn't
sufficient as wq_unbound_cpumask is only protected by wq_pool_mutex.
Make wq_unbound_cpumask protected with wq_pool_attach_mutex and also
remove the need of temporary saved_cpumask.
Fixes: 10a5a651e3 ("workqueue: Restrict kworker in the offline CPU pool running on housekeeping CPUs")
Reported-by: Valentin Schneider <vschneid@redhat.com>
Signed-off-by: Lai Jiangshan <jiangshan.ljs@antgroup.com>
Signed-off-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28319d6dc5e2ffefa452c2377dd0f71621b5bff0 ]
RCU Tasks and PID-namespace unshare can interact in do_exit() in a
complicated circular dependency:
1) TASK A calls unshare(CLONE_NEWPID), this creates a new PID namespace
that every subsequent child of TASK A will belong to. But TASK A
doesn't itself belong to that new PID namespace.
2) TASK A forks() and creates TASK B. TASK A stays attached to its PID
namespace (let's say PID_NS1) and TASK B is the first task belonging
to the new PID namespace created by unshare() (let's call it PID_NS2).
3) Since TASK B is the first task attached to PID_NS2, it becomes the
PID_NS2 child reaper.
4) TASK A forks() again and creates TASK C which get attached to PID_NS2.
Note how TASK C has TASK A as a parent (belonging to PID_NS1) but has
TASK B (belonging to PID_NS2) as a pid_namespace child_reaper.
5) TASK B exits and since it is the child reaper for PID_NS2, it has to
kill all other tasks attached to PID_NS2, and wait for all of them to
die before getting reaped itself (zap_pid_ns_process()).
6) TASK A calls synchronize_rcu_tasks() which leads to
synchronize_srcu(&tasks_rcu_exit_srcu).
7) TASK B is waiting for TASK C to get reaped. But TASK B is under a
tasks_rcu_exit_srcu SRCU critical section (exit_notify() is between
exit_tasks_rcu_start() and exit_tasks_rcu_finish()), blocking TASK A.
8) TASK C exits and since TASK A is its parent, it waits for it to reap
TASK C, but it can't because TASK A waits for TASK B that waits for
TASK C.
Pid_namespace semantics can hardly be changed at this point. But the
coverage of tasks_rcu_exit_srcu can be reduced instead.
The current task is assumed not to be concurrently reapable at this
stage of exit_notify() and therefore tasks_rcu_exit_srcu can be
temporarily relaxed without breaking its constraints, providing a way
out of the deadlock scenario.
[ paulmck: Fix build failure by adding additional declaration. ]
Fixes: 3f95aa81d2 ("rcu: Make TASKS_RCU handle tasks that are almost done exiting")
Reported-by: Pengfei Xu <pengfei.xu@intel.com>
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W . Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 44757092958bdd749775022f915b7ac974384c2a ]
Ever since the following commit:
5a41344a3d ("srcu: Simplify __srcu_read_unlock() via this_cpu_dec()")
SRCU doesn't rely anymore on preemption to be disabled in order to
modify the per-CPU counter. And even then it used to be done from the API
itself.
Therefore and after checking further, it appears to be safe to remove
the preemption disablement around __srcu_read_[un]lock() in
exit_tasks_rcu_start() and exit_tasks_rcu_finish()
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 28319d6dc5e2 ("rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e4e1e8089c5fd948da12cb9f4adc93821036945f ]
Make sure we don't need to look again into the depths of git blame in
order not to miss a subtle part about how rcu-tasks is dealing with
exiting tasks.
Suggested-by: Boqun Feng <boqun.feng@gmail.com>
Suggested-by: Neeraj Upadhyay <quic_neeraju@quicinc.com>
Suggested-by: Paul E. McKenney <paulmck@kernel.org>
Cc: Oleg Nesterov <oleg@redhat.com>
Cc: Lai Jiangshan <jiangshanlai@gmail.com>
Cc: Eric W. Biederman <ebiederm@xmission.com>
Signed-off-by: Frederic Weisbecker <frederic@kernel.org>
Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
Stable-dep-of: 28319d6dc5e2 ("rcu-tasks: Fix synchronize_rcu_tasks() VS zap_pid_ns_processes()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7c4a5b89a0b5a57a64b601775b296abf77a9fe97 ]
Commit 326587b840 ("sched: fix goto retry in pick_next_task_rt()")
removed any path which could make pick_next_rt_entity() return NULL.
However, BUG_ON(!rt_se) in _pick_next_task_rt() (the only caller of
pick_next_rt_entity()) still checks the error condition, which can
never happen, since list_entry() never returns NULL.
Remove the BUG_ON check, and instead emit a warning in the only
possible error condition here: the queue being empty which should
never happen.
Fixes: 326587b840 ("sched: fix goto retry in pick_next_task_rt()")
Signed-off-by: Pietro Borrello <borrello@diag.uniroma1.it>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Phil Auld <pauld@redhat.com>
Reviewed-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Link: https://lore.kernel.org/r/20230128-list-entry-null-check-sched-v3-1-b1a71bd1ac6b@diag.uniroma1.it
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3f5245538a1964ae186ab7e1636020a41aa63143 ]
Commit:
91d2a812df ("locking/rwsem: Make handoff writer optimistically spin on owner")
... assumes that when the owner field is changed to NULL, the lock will
become free soon. But commit:
48dfb5d256 ("locking/rwsem: Disable preemption while trying for rwsem lock")
... disabled preemption when acquiring rwsem for write.
However, preemption has not yet been disabled when acquiring a read lock
on a rwsem. So a reader can add a RWSEM_READER_BIAS to count without
setting owner to signal a reader, got preempted out by a RT task which
then spins in the writer slowpath as owner remains NULL leading to live lock.
One easy way to fix this problem is to disable preemption at all the
down_read*() and up_read() code paths as implemented in this patch.
Fixes: 91d2a812df ("locking/rwsem: Make handoff writer optimistically spin on owner")
Reported-by: Mukesh Ojha <quic_mojha@quicinc.com>
Suggested-by: Peter Zijlstra <peterz@infradead.org>
Signed-off-by: Waiman Long <longman@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Link: https://lore.kernel.org/r/20230126003628.365092-3-longman@redhat.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a449dfbfc0894676ad0aa1873383265047529e3a upstream.
Using pr_cont() in the tasks freezing code related to system-wide
suspend and hibernation is problematic, because the continuation
messages printed there are susceptible to interspersing with other
unrelated messages which results in output that is hard to
understand.
Address this issue by modifying try_to_freeze_tasks() to print
messages that don't require continuations and adjusting its
callers accordingly.
Reported-by: Thomas Weißschuh <linux@weissschuh.net>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: Petr Mladek <pmladek@suse.com>
Cc: Paul Menzel <pmenzel@molgen.mpg.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit f3dd0c53370e70c0f9b7e931bbec12916f3bb8cc upstream.
Commit 74e19ef0ff80 ("uaccess: Add speculation barrier to
copy_from_user()") built fine on x86-64 and arm64, and that's the extent
of my local build testing.
It turns out those got the <linux/nospec.h> include incidentally through
other header files (<linux/kvm_host.h> in particular), but that was not
true of other architectures, resulting in build errors
kernel/bpf/core.c: In function ‘___bpf_prog_run’:
kernel/bpf/core.c:1913:3: error: implicit declaration of function ‘barrier_nospec’
so just make sure to explicitly include the proper <linux/nospec.h>
header file to make everybody see it.
Fixes: 74e19ef0ff80 ("uaccess: Add speculation barrier to copy_from_user()")
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Viresh Kumar <viresh.kumar@linaro.org>
Reported-by: Huacai Chen <chenhuacai@loongson.cn>
Tested-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Dave Hansen <dave.hansen@linux.intel.com>
Acked-by: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 74e19ef0ff8061ef55957c3abd71614ef0f42f47 upstream.
The results of "access_ok()" can be mis-speculated. The result is that
you can end speculatively:
if (access_ok(from, size))
// Right here
even for bad from/size combinations. On first glance, it would be ideal
to just add a speculation barrier to "access_ok()" so that its results
can never be mis-speculated.
But there are lots of system calls just doing access_ok() via
"copy_to_user()" and friends (example: fstat() and friends). Those are
generally not problematic because they do not _consume_ data from
userspace other than the pointer. They are also very quick and common
system calls that should not be needlessly slowed down.
"copy_from_user()" on the other hand uses a user-controller pointer and
is frequently followed up with code that might affect caches. Take
something like this:
if (!copy_from_user(&kernelvar, uptr, size))
do_something_with(kernelvar);
If userspace passes in an evil 'uptr' that *actually* points to a kernel
addresses, and then do_something_with() has cache (or other)
side-effects, it could allow userspace to infer kernel data values.
Add a barrier to the common copy_from_user() code to prevent
mis-speculated values which happen after the copy.
Also add a stub for architectures that do not define barrier_nospec().
This makes the macro usable in generic code.
Since the barrier is now usable in generic code, the x86 #ifdef in the
BPF code can also go away.
Reported-by: Jordy Zomer <jordyzomer@google.com>
Suggested-by: Linus Torvalds <torvalds@linuxfoundation.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Reviewed-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: Daniel Borkmann <daniel@iogearbox.net> # BPF bits
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 710ffe671e014d5ccbcff225130a178b088ef090 ]
Psi polling mechanism is trying to minimize the number of wakeups to
run psi_poll_work and is currently relying on timer_pending() to detect
when this work is already scheduled. This provides a window of opportunity
for psi_group_change to schedule an immediate psi_poll_work after
poll_timer_fn got called but before psi_poll_work could reschedule itself.
Below is the depiction of this entire window:
poll_timer_fn
wake_up_interruptible(&group->poll_wait);
psi_poll_worker
wait_event_interruptible(group->poll_wait, ...)
psi_poll_work
psi_schedule_poll_work
if (timer_pending(&group->poll_timer)) return;
...
mod_timer(&group->poll_timer, jiffies + delay);
Prior to 461daba06b we used to rely on poll_scheduled atomic which was
reset and set back inside psi_poll_work and therefore this race window
was much smaller.
The larger window causes increased number of wakeups and our partners
report visible power regression of ~10mA after applying 461daba06b.
Bring back the poll_scheduled atomic and make this race window even
narrower by resetting poll_scheduled only when we reach polling expiration
time. This does not completely eliminate the possibility of extra wakeups
caused by a race with psi_group_change however it will limit it to the
worst case scenario of one extra wakeup per every tracking window (0.5s
in the worst case).
This patch also ensures correct ordering between clearing poll_scheduled
flag and obtaining changed_states using memory barrier. Correct ordering
between updating changed_states and setting poll_scheduled is ensured by
atomic_xchg operation.
By tracing the number of immediate rescheduling attempts performed by
psi_group_change and the number of these attempts being blocked due to
psi monitor being already active, we can assess the effects of this change:
Before the patch:
Run#1 Run#2 Run#3
Immediate reschedules attempted: 684365 1385156 1261240
Immediate reschedules blocked: 682846 1381654 1258682
Immediate reschedules (delta): 1519 3502 2558
Immediate reschedules (% of attempted): 0.22% 0.25% 0.20%
After the patch:
Run#1 Run#2 Run#3
Immediate reschedules attempted: 882244 770298 426218
Immediate reschedules blocked: 881996 769796 426074
Immediate reschedules (delta): 248 502 144
Immediate reschedules (% of attempted): 0.03% 0.07% 0.03%
The number of non-blocked immediate reschedules dropped from 0.22-0.25%
to 0.03-0.07%. The drop is attributed to the decrease in the race window
size and the fact that we allow this race only when psi monitors reach
polling window expiration time.
Fixes: 461daba06b ("psi: eliminate kthread_worker from psi trigger scheduling mechanism")
Reported-by: Kathleen Chang <yt.chang@mediatek.com>
Reported-by: Wenju Xu <wenju.xu@mediatek.com>
Reported-by: Jonathan Chen <jonathan.jmchen@mediatek.com>
Signed-off-by: Suren Baghdasaryan <surenb@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Chengming Zhou <zhouchengming@bytedance.com>
Acked-by: Johannes Weiner <hannes@cmpxchg.org>
Tested-by: SH Chen <show-hong.chen@mediatek.com>
Link: https://lore.kernel.org/r/20221028194541.813985-1-surenb@google.com
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d125d1349abeb46945dc5e98f7824bf688266f13 upstream.
syzbot reported a RCU stall which is caused by setting up an alarmtimer
with a very small interval and ignoring the signal. The reproducer arms the
alarm timer with a relative expiry of 8ns and an interval of 9ns. Not a
problem per se, but that's an issue when the signal is ignored because then
the timer is immediately rearmed because there is no way to delay that
rearming to the signal delivery path. See posix_timer_fn() and commit
58229a1899 ("posix-timers: Prevent softirq starvation by small intervals
and SIG_IGN") for details.
The reproducer does not set SIG_IGN explicitely, but it sets up the timers
signal with SIGCONT. That has the same effect as explicitely setting
SIG_IGN for a signal as SIGCONT is ignored if there is no handler set and
the task is not ptraced.
The log clearly shows that:
[pid 5102] --- SIGCONT {si_signo=SIGCONT, si_code=SI_TIMER, si_timerid=0, si_overrun=316014, si_int=0, si_ptr=NULL} ---
It works because the tasks are traced and therefore the signal is queued so
the tracer can see it, which delays the restart of the timer to the signal
delivery path. But then the tracer is killed:
[pid 5087] kill(-5102, SIGKILL <unfinished ...>
...
./strace-static-x86_64: Process 5107 detached
and after it's gone the stall can be observed:
syzkaller login: [ 79.439102][ C0] hrtimer: interrupt took 68471 ns
[ 184.460538][ C1] rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
...
[ 184.658237][ C1] rcu: Stack dump where RCU GP kthread last ran:
[ 184.664574][ C1] Sending NMI from CPU 1 to CPUs 0:
[ 184.669821][ C0] NMI backtrace for cpu 0
[ 184.669831][ C0] CPU: 0 PID: 5108 Comm: syz-executor192 Not tainted 6.2.0-rc6-next-20230203-syzkaller #0
...
[ 184.670036][ C0] Call Trace:
[ 184.670041][ C0] <IRQ>
[ 184.670045][ C0] alarmtimer_fired+0x327/0x670
posix_timer_fn() prevents that by checking whether the interval for
timers which have the signal ignored is smaller than a jiffie and
artifically delay it by shifting the next expiry out by a jiffie. That's
accurate vs. the overrun accounting, but slightly inaccurate
vs. timer_gettimer(2).
The comment in that function says what needs to be done and there was a fix
available for the regular userspace induced SIG_IGN mechanism, but that did
not work due to the implicit ignore for SIGCONT and similar signals. This
needs to be worked on, but for now the only available workaround is to do
exactly what posix_timer_fn() does:
Increase the interval of self-rearming timers, which have their signal
ignored, to at least a jiffie.
Interestingly this has been fixed before via commit ff86bf0c65
("alarmtimer: Rate limit periodic intervals") already, but that fix got
lost in a later rework.
Reported-by: syzbot+b9564ba6e8e00694511b@syzkaller.appspotmail.com
Fixes: f2c45807d3 ("alarmtimer: Switch over to generic set/get/rearm routine")
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Acked-by: John Stultz <jstultz@google.com>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/r/87k00q1no2.ffs@tglx
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 70b5339caf847b8b6097b6dfab0c5a99b40713c8 upstream.
trace_define_field_ext() is not used outside of trace_events.c, it should
be static.
Link: https://lore.kernel.org/oe-kbuild-all/202302130750.679RaRog-lkp@intel.com/
Fixes: b6c7abd1c28a ("tracing: Fix TASK_COMM_LEN in trace event format file")
Reported-by: Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit eedeb787ebb53de5c5dcf7b7b39d01bf1b0f037d upstream.
Tetsuo-San noted that commit f5d39b0208 ("freezer,sched: Rewrite
core freezer logic") broke call_usermodehelper_exec() for the KILLABLE
case.
Specifically it was missed that the second, unconditional,
wait_for_completion() was not optional and ensures the on-stack
completion is unused before going out-of-scope.
Fixes: f5d39b0208 ("freezer,sched: Rewrite core freezer logic")
Reported-by: syzbot+6cd18e123583550cf469@syzkaller.appspotmail.com
Reported-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Debugged-by: Tetsuo Handa <penguin-kernel@I-love.SAKURA.ne.jp>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/Y90ar35uKQoUrLEK@hirez.programming.kicks-ass.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
