UNWIND_HINT_FUNC has some limitations: specifically, it doesn't reset
all the registers to undefined. This causes objtool to get confused
about the RBP push in __switch_to_asm(), resulting in bad ORC data.
While __switch_to_asm() does do some stack magic, it's otherwise a
normal callable-from-C function, so just annotate it as a function,
which makes objtool happy and allows it to produces the correct hints
automatically.
Fixes: 8c1f75587a18 ("x86/entry/64: Add unwind hint annotations")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/03d0411920d10f7418f2e909210d8e9a3b2ab081.1587808742.git.jpoimboe@redhat.com
In swapgs_restore_regs_and_return_to_usermode, after the stack is
switched to the trampoline stack, the existing UNWIND_HINT_REGS hint is
no longer valid, which can result in the following ORC unwinder warning:
WARNING: can't dereference registers at 000000003aeb0cdd for ip swapgs_restore_regs_and_return_to_usermode+0x93/0xa0
For full correctness, we could try to add complicated unwind hints so
the unwinder could continue to find the registers, but when when it's
this close to kernel exit, unwind hints aren't really needed anymore and
it's fine to just use an empty hint which tells the unwinder to stop.
For consistency, also move the UNWIND_HINT_EMPTY in
entry_SYSCALL_64_after_hwframe to a similar location.
Fixes: 3e3b9293d392 ("x86/entry/64: Return to userspace from the trampoline stack")
Reported-by: Vince Weaver <vincent.weaver@maine.edu>
Reported-by: Dave Jones <dsj@fb.com>
Reported-by: Dr. David Alan Gilbert <dgilbert@redhat.com>
Reported-by: Joe Mario <jmario@redhat.com>
Reported-by: Jann Horn <jannh@google.com>
Reported-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: https://lore.kernel.org/r/60ea8f562987ed2d9ace2977502fe481c0d7c9a0.1587808742.git.jpoimboe@redhat.com
The PUSH_AND_CLEAR_REGS macro zeroes each register immediately after
pushing it. If an NMI or exception hits after a register is cleared,
but before the UNWIND_HINT_REGS annotation, the ORC unwinder will
wrongly think the previous value of the register was zero. This can
confuse the unwinding process and cause it to exit early.
Because ORC is simpler than DWARF, there are a limited number of unwind
annotation states, so it's not possible to add an individual unwind hint
after each push/clear combination. Instead, the register clearing
instructions need to be consolidated and moved to after the
UNWIND_HINT_REGS annotation.
Fixes: 3f01daecd545 ("x86/entry/64: Introduce the PUSH_AND_CLEAN_REGS macro")
Reviewed-by: Miroslav Benes <mbenes@suse.cz>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Dave Jones <dsj@fb.com>
Cc: Jann Horn <jannh@google.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Link: https://lore.kernel.org/r/68fd3d0bc92ae2d62ff7879d15d3684217d51f08.1587808742.git.jpoimboe@redhat.com
The kernel fails to compile with CONFIG_PROTECTED_VIRTUALIZATION_GUEST
set but CONFIG_KVM unset.
This patch fixes the issue by making the needed variable always available.
Link: https://lkml.kernel.org/r/20200423120114.2027410-1-imbrenda@linux.ibm.com
Fixes: a0f60f843199 ("s390/protvirt: Add sysfs firmware interface for Ultravisor information")
Reported-by: kbuild test robot <lkp@intel.com>
Reported-by: Philipp Rudo <prudo@linux.ibm.com>
Suggested-by: Philipp Rudo <prudo@linux.ibm.com>
Reviewed-by: David Hildenbrand <david@redhat.com>
Reviewed-by: Cornelia Huck <cohuck@redhat.com>
Reviewed-by: Vasily Gorbik <gor@linux.ibm.com>
Acked-by: Christian Borntraeger <borntraeger@de.ibm.com>
Signed-off-by: Claudio Imbrenda <imbrenda@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Pull networking fixes from David Miller:
1) Fix memory leak in netfilter flowtable, from Roi Dayan.
2) Ref-count leaks in netrom and tipc, from Xiyu Yang.
3) Fix warning when mptcp socket is never accepted before close, from
Florian Westphal.
4) Missed locking in ovs_ct_exit(), from Tonghao Zhang.
5) Fix large delays during PTP synchornization in cxgb4, from Rahul
Lakkireddy.
6) team_mode_get() can hang, from Taehee Yoo.
7) Need to use kvzalloc() when allocating fw tracer in mlx5 driver,
from Niklas Schnelle.
8) Fix handling of bpf XADD on BTF memory, from Jann Horn.
9) Fix BPF_STX/BPF_B encoding in x86 bpf jit, from Luke Nelson.
10) Missing queue memory release in iwlwifi pcie code, from Johannes
Berg.
11) Fix NULL deref in macvlan device event, from Taehee Yoo.
12) Initialize lan87xx phy correctly, from Yuiko Oshino.
13) Fix looping between VRF and XFRM lookups, from David Ahern.
14) etf packet scheduler assumes all sockets are full sockets, which is
not necessarily true. From Eric Dumazet.
15) Fix mptcp data_fin handling in RX path, from Paolo Abeni.
16) fib_select_default() needs to handle nexthop objects, from David
Ahern.
17) Use GFP_ATOMIC under spinlock in mac80211_hwsim, from Wei Yongjun.
18) vxlan and geneve use wrong nlattr array, from Sabrina Dubroca.
19) Correct rx/tx stats in bcmgenet driver, from Doug Berger.
20) BPF_LDX zero-extension is encoded improperly in x86_32 bpf jit, fix
from Luke Nelson.
* git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (100 commits)
selftests/bpf: Fix a couple of broken test_btf cases
tools/runqslower: Ensure own vmlinux.h is picked up first
bpf: Make bpf_link_fops static
bpftool: Respect the -d option in struct_ops cmd
selftests/bpf: Add test for freplace program with expected_attach_type
bpf: Propagate expected_attach_type when verifying freplace programs
bpf: Fix leak in LINK_UPDATE and enforce empty old_prog_fd
bpf, x86_32: Fix logic error in BPF_LDX zero-extension
bpf, x86_32: Fix clobbering of dst for BPF_JSET
bpf, x86_32: Fix incorrect encoding in BPF_LDX zero-extension
bpf: Fix reStructuredText markup
net: systemport: suppress warnings on failed Rx SKB allocations
net: bcmgenet: suppress warnings on failed Rx SKB allocations
macsec: avoid to set wrong mtu
mac80211: sta_info: Add lockdep condition for RCU list usage
mac80211: populate debugfs only after cfg80211 init
net: bcmgenet: correct per TX/RX ring statistics
net: meth: remove spurious copyright text
net: phy: bcm84881: clear settings on link down
chcr: Fix CPU hard lockup
...
Commit dc3efc6ff0d5 ("arm64: dts: imx8m: fix aips dts node") caused several
dtc warnings like these when building with W=1:
arch/arm64/boot/dts/freescale/imx8mm.dtsi:265.23-542.5: Warning (simple_bus_reg): /soc@0/bus@30000000: simple-bus unit address format error, expected "301f0000"
arch/arm64/boot/dts/freescale/imx8mm.dtsi:544.23-602.5: Warning (simple_bus_reg): /soc@0/bus@30400000: simple-bus unit address format error, expected "305f0000"
arch/arm64/boot/dts/freescale/imx8mm.dtsi:604.23-862.5: Warning (simple_bus_reg): /soc@0/bus@30800000: simple-bus unit address format error, expected "309f0000"
arch/arm64/boot/dts/freescale/imx8mm.dtsi:864.23-909.5: Warning (simple_bus_reg): /soc@0/bus@32c00000: simple-bus unit address format error, expected "32df0000"
Fix them by using the correct address base and size in the AIPS reg
properties.
Fixes: dc3efc6ff0d5 ("arm64: dts: imx8m: fix aips dts node")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
When verifier_zext is true, we don't need to emit code
for zero-extension.
Fixes: 836256bf5f37 ("x32: bpf: eliminate zero extension code-gen")
Signed-off-by: Wang YanQing <udknight@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Link: https://lore.kernel.org/bpf/20200423050637.GA4029@udknight
The current JIT clobbers the destination register for BPF_JSET BPF_X
and BPF_K by using "and" and "or" instructions. This is fine when the
destination register is a temporary loaded from a register stored on
the stack but not otherwise.
This patch fixes the problem (for both BPF_K and BPF_X) by always loading
the destination register into temporaries since BPF_JSET should not
modify the destination register.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way.
Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-2-luke.r.nels@gmail.com
The current JIT uses the following sequence to zero-extend into the
upper 32 bits of the destination register for BPF_LDX BPF_{B,H,W},
when the destination register is not on the stack:
EMIT3(0xC7, add_1reg(0xC0, dst_hi), 0);
The problem is that C7 /0 encodes a MOV instruction that requires a 4-byte
immediate; the current code emits only 1 byte of the immediate. This
means that the first 3 bytes of the next instruction will be treated as
the rest of the immediate, breaking the stream of instructions.
This patch fixes the problem by instead emitting "xor dst_hi,dst_hi"
to clear the upper 32 bits. This fixes the problem and is more efficient
than using MOV to load a zero immediate.
This bug may not be currently triggerable as BPF_REG_AX is the only
register not stored on the stack and the verifier uses it in a limited
way, and the verifier implements a zero-extension optimization. But the
JIT should avoid emitting incorrect encodings regardless.
Fixes: 03f5781be2c7b ("bpf, x86_32: add eBPF JIT compiler for ia32")
Signed-off-by: Xi Wang <xi.wang@gmail.com>
Signed-off-by: Luke Nelson <luke.r.nels@gmail.com>
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Reviewed-by: H. Peter Anvin (Intel) <hpa@zytor.com>
Acked-by: Wang YanQing <udknight@gmail.com>
Link: https://lore.kernel.org/bpf/20200422173630.8351-1-luke.r.nels@gmail.com
ARCH_HAS_STRICT_KERNEL_RWX is not useful for NO-MMU systems.
Furthermore, has this option leads to very large boot image files on
64bits architectures, do not enable this option to allow supporting
no-mmu platforms such as the Kendryte K210 SoC based boards.
Fixes: 00cb41d5ad31 ("riscv: add alignment for text, rodata and data sections")
Signed-off-by: Damien Le Moal <damien.lemoal@wdc.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Reviewed-by: Wladimir J. van der Laan <laanwj@gmail.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
- fix scripts/config to properly handle ':' in string type CONFIG options
- fix unneeded rebuilds of DT schema check rule
- git rid of ordering dependency between <linux/vermagic.h> and
<linux/module.h> to fix build errors in some network drivers
- clean up generated headers of host arch with 'make ARCH=um mrproper'
-----BEGIN PGP SIGNATURE-----
iQJJBAABCgAzFiEEbmPs18K1szRHjPqEPYsBB53g2wYFAl6jDlAVHG1hc2FoaXJv
eUBrZXJuZWwub3JnAAoJED2LAQed4NsGcZEP/2ORmb2mfCCrPU9Cjks+97FsQd7P
aqOCAX0884prFBMykSYuPJ9DSlMEcMwkA7zdd7dlaEbwI7WJhWzjoQRi+/pnsSMn
7wG46T1Vj4CXIvHgP8PEeO0wFXXdNOQNxeJ/CDAD99ISmMTg4crJWyPOI5eFTKad
GqWWY04smfE/2RhAbA3UJASsrO6Ev45Os4CLjXwqDM26oDozyyhrWdGFrE5/pqLp
/feA5Jky8lUMIRoql3QMCKkjFpwl+A6IGnD2BCMdkkgRoTn+V/v28ENqYEjPEoYw
fB2wVQ6+3E9DEVS1lBaYG+ZMhyZxJWABd2KCN6OuVZPVvuJEjnCWnT9wy71ZBO3W
YDUOMsL5yqae4OhpCOHAujsBe23hEbjPXRHiAFXiaFayFb3gYgoiQhKV3HNSY00p
JEFk9by3RggL/ZOmLhfzX9BLdfaK1q/k4kGuTU3eD4JryfI70tlO/t726LbFKqjP
dBZjCGjGMZv2QAnLVa9mAnO3OH2jq8dyrlsjNPbTsQ4yBqk+YzXm16M7RCqOBKE1
w4bI8oEBLUfzMrhQGYRVOMxS8DkxyNg6KUjbXkGBgueuiYT38pjRaj955hN4kCzT
FxYXHwm6v+VwJp5wt/HN+Gd8A5rzQgGUFutqJ9vAgQUBJJz5y5RP+7AUVBKspIe/
OF8x1J/O5REkOOCP
=3L2c
-----END PGP SIGNATURE-----
Merge tag 'kbuild-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild
Pull Kbuild fixes from Masahiro Yamada:
- fix scripts/config to properly handle ':' in string type CONFIG
options
- fix unneeded rebuilds of DT schema check rule
- git rid of ordering dependency between <linux/vermagic.h> and
<linux/module.h> to fix build errors in some network drivers
- clean up generated headers of host arch with 'make ARCH=um mrproper'
* tag 'kbuild-fixes-v5.7' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
h8300: ignore vmlinux.lds
Documentation: kbuild: fix the section title format
um: ensure `make ARCH=um mrproper` removes arch/$(SUBARCH)/include/generated/
arch: split MODULE_ARCH_VERMAGIC definitions out to <asm/vermagic.h>
kbuild: fix DT binding schema rule again to avoid needless rebuilds
scripts/config: allow colons in option strings for sed
A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I found
after restarting my randconfig build testing that had been dormant for
a while.
On the Nokia N950/N9 phone, a DT fix is required to address a boot
regression.
For the bcm283x (Raspberry Pi), two DT fixes address minor issues.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
-----BEGIN PGP SIGNATURE-----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=K1jH
-----END PGP SIGNATURE-----
Merge tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull ARM SoC fixes from Arnd Bergmann:
"A few smaller fixes for v5.7-rc3: The majority are fixes for bugs I
found after restarting my randconfig build testing that had been
dormant for a while.
On the Nokia N950/N9 phone, a DT fix is required to address a boot
regression.
For the bcm283x (Raspberry Pi), two DT fixes address minor issues"
* tag 'armsoc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
soc: imx8: select SOC_BUS
soc: tegra: fix tegra_pmc_get_suspend_mode definition
soc: fsl: dpio: avoid stack usage warning
soc: fsl: dpio: fix incorrect pointer conversions
ARM: imx: provide v7_cpu_resume() only on ARM_CPU_SUSPEND=y
ARM: dts: bcm283x: Disable dsi0 node
firmware: xilinx: make firmware_debugfs_root static
drivers: soc: xilinx: fix firmware driver Kconfig dependency
ARM: dts: bcm283x: Add cells encoding format to firmware bus
ARM: dts: OMAP3: disable RNG on N950/N9
5.7, please pull the following:
- Nicolas provides a fix for 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's
firmware bus DMA limitations") which missed adding proper
#address-cells and #size-cells properties and he also disables the DSI
node which should have been disabled by default but was not.
-----BEGIN PGP SIGNATURE-----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=6CKq
-----END PGP SIGNATURE-----
Merge tag 'arm-soc/for-5.7/devicetree-fixes' of https://github.com/Broadcom/stblinux into arm/fixes
This pull request contains Broadcom ARM-based SoCs Device Tree fixes for
5.7, please pull the following:
- Nicolas provides a fix for 55c7c0621078 ("ARM: dts: bcm283x: Fix vc4's
firmware bus DMA limitations") which missed adding proper
#address-cells and #size-cells properties and he also disables the DSI
node which should have been disabled by default but was not.
* tag 'arm-soc/for-5.7/devicetree-fixes' of https://github.com/Broadcom/stblinux:
ARM: dts: bcm283x: Disable dsi0 node
ARM: dts: bcm283x: Add cells encoding format to firmware bus
Link: https://lore.kernel.org/r/20200417171725.1084-1-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Using SDMA1 with UART1 is causing a "Timeout waiting for CH0" error.
This patch changes to ahb clock from SDMA1_ROOT to AHB which fixes the
timeout error.
Fixes: 6c3debcbae47 ("arm64: dts: freescale: Add i.MX8MN dtsi support")
Signed-off-by: Adam Ford <aford173@gmail.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The I2C2 pins are already used and the following errors are seen:
imx27-pinctrl 10015000.iomuxc: pin MX27_PAD_I2C2_SDA already requested by 10012000.i2c; cannot claim for 1001d000.i2c
imx27-pinctrl 10015000.iomuxc: pin-69 (1001d000.i2c) status -22
imx27-pinctrl 10015000.iomuxc: could not request pin 69 (MX27_PAD_I2C2_SDA) from group i2c2grp on device 10015000.iomuxc
imx-i2c 1001d000.i2c: Error applying setting, reverse things back
imx-i2c: probe of 1001d000.i2c failed with error -22
Fix it by adding the correct I2C1 IOMUX entries for the pinctrl_i2c1 group.
Cc: <stable@vger.kernel.org>
Fixes: 61664d0b432a ("ARM: dts: imx27 phyCARD-S pinctrl")
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Stefan Riedmueller <s.riedmueller@phytec.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
As the bug report [1] pointed out, <linux/vermagic.h> must be included
after <linux/module.h>.
I believe we should not impose any include order restriction. We often
sort include directives alphabetically, but it is just coding style
convention. Technically, we can include header files in any order by
making every header self-contained.
Currently, arch-specific MODULE_ARCH_VERMAGIC is defined in
<asm/module.h>, which is not included from <linux/vermagic.h>.
Hence, the straight-forward fix-up would be as follows:
|--- a/include/linux/vermagic.h
|+++ b/include/linux/vermagic.h
|@@ -1,5 +1,6 @@
| /* SPDX-License-Identifier: GPL-2.0 */
| #include <generated/utsrelease.h>
|+#include <linux/module.h>
|
| /* Simply sanity version stamp for modules. */
| #ifdef CONFIG_SMP
This works enough, but for further cleanups, I split MODULE_ARCH_VERMAGIC
definitions into <asm/vermagic.h>.
With this, <linux/module.h> and <linux/vermagic.h> will be orthogonal,
and the location of MODULE_ARCH_VERMAGIC definitions will be consistent.
For arc and ia64, MODULE_PROC_FAMILY is only used for defining
MODULE_ARCH_VERMAGIC. I squashed it.
For hexagon, nds32, and xtensa, I removed <asm/modules.h> entirely
because they contained nothing but MODULE_ARCH_VERMAGIC definition.
Kbuild will automatically generate <asm/modules.h> at build-time,
wrapping <asm-generic/module.h>.
[1] https://lore.kernel.org/lkml/20200411155623.GA22175@zn.tnic
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Jessica Yu <jeyu@kernel.org>
Improve readability of the function intel_set_max_freq_ratio() by moving
the check for KNL CPUs there, together with checks for GLM and SKX.
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-5-ggherdovich@suse.cz
The static key arch_scale_freq_key only needs to be enabled once (at
boot). This change fixes a bug by which the key was enabled every time cpu0
is started, even as a secondary CPU during cpu hotplug. Secondary CPUs are
started from the idle thread: setting a static key from there means
acquiring a lock and may result in sleeping in the idle task, causing CPU
lockup.
Another consequence of this change is that init_counter_refs() is now
called on each CPU correctly; previously the function on_each_cpu() was
used, but it was called at boot when the only online cpu is cpu0.
[ggherdovich@suse.cz: Tested and wrote changelog]
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Reported-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-4-ggherdovich@suse.cz
If a CPU has less than 4 physical cores, MSR_TURBO_RATIO_LIMIT will
rightfully report that the 4C turbo ratio is zero. In such cases, use the
1C turbo ratio instead for frequency invariance calculations.
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Reported-by: Like Xu <like.xu@linux.intel.com>
Reported-by: Neil Rickert <nwr10cst-oslnx@yahoo.com>
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Tested-by: Dave Kleikamp <dave.kleikamp@oracle.com>
Link: https://lkml.kernel.org/r/20200416054745.740-3-ggherdovich@suse.cz
Some hypervisors such as VMWare ESXi 5.5 advertise support for
X86_FEATURE_APERFMPERF but then fill all MSR's with zeroes. In particular,
MSR_PLATFORM_INFO set to zero tricks the code that wants to know the base
clock frequency of the CPU (highest non-turbo frequency), producing a
division by zero when computing the ratio turbo_freq/base_freq necessary
for frequency invariant accounting.
It is to be noted that even if MSR_PLATFORM_INFO contained the appropriate
data, APERF and MPERF are constantly zero on ESXi 5.5, thus freq-invariance
couldn't be done in principle (not that it would make a lot of sense in a
VM anyway). The real problem is advertising X86_FEATURE_APERFMPERF. This
appears to be fixed in more recent versions: ESXi 6.7 doesn't advertise
that feature.
Fixes: 1567c3e3467c ("x86, sched: Add support for frequency invariance")
Signed-off-by: Giovanni Gherdovich <ggherdovich@suse.cz>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Link: https://lkml.kernel.org/r/20200416054745.740-2-ggherdovich@suse.cz
with the introduction of CPU directed interrupts the kernel
parameter pci=force_floating was introduced to fall back
to the previous behavior using floating irqs.
However we were still setting the affinity in that case,
both in __irq_alloc_descs() and via the irq_set_affinity
callback in struct irq_chip.
For the former only set the affinity in the directed case.
The latter is explicitly set in zpci_directed_irq_init()
so we can just leave it unset for the floating case.
Fixes: e979ce7bced2 ("s390/pci: provide support for CPU directed interrupts")
Co-developed-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Alexander Schmidt <alexs@linux.ibm.com>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
Switching tracers include instruction patching. To prevent that a
instruction is patched while it's read the instruction patching is done
in stop_machine 'context'. This also means that any function called
during stop_machine must not be traced. Thus add 'notrace' to all
functions called within stop_machine.
Fixes: 1ec2772e0c3c ("s390/diag: add a statistic for diagnose calls")
Fixes: 38f2c691a4b3 ("s390: improve wait logic of stop_machine")
Fixes: 4ecf0a43e729 ("processor: get rid of cpu_relax_yield")
Signed-off-by: Philipp Rudo <prudo@linux.ibm.com>
Signed-off-by: Vasily Gorbik <gor@linux.ibm.com>
CONFIG_PPC_KUAP_DEBUG is not selectable because it depends on PPC_32
which doesn't exists.
Fixing it leads to a deadlock due to a vital register getting
clobbered in _switch().
Change dependency to PPC32 and use r0 instead of r4 in _switch()
Fixes: e2fb9f544431 ("powerpc/32: Prepare for Kernel Userspace Access Protection")
Cc: stable@vger.kernel.org # v5.2+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/540242f7d4573f7cdf1b3bf46bb35f743b2cd68f.1587124651.git.christophe.leroy@c-s.fr
WRITE_RO lkdtm test works.
But when selecting CONFIG_DEBUG_RODATA_TEST, the kernel reports
rodata_test: test data was not read only
This is because when rodata test runs, there are still old entries
in TLB.
Flush TLB after setting kernel pages RO or NX.
Fixes: d5f17ee96447 ("powerpc/8xx: don't disable large TLBs with CONFIG_STRICT_KERNEL_RWX")
Cc: stable@vger.kernel.org # v5.1+
Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/485caac75f195f18c11eb077b0031fdd2bb7fb9e.1587361039.git.christophe.leroy@c-s.fr
There is no shutdown call in SBI v0.2, only set pm_power_off
when RISCV_SBI_V01 enabled to fix following build error,
riscv64-linux-ld: arch/riscv/kernel/sbi.o: in function `sbi_power_off':
sbi.c:(.text+0xe): undefined reference to `sbi_shutdown
Fixes: efca13989250 ("RISC-V: Introduce a new config for SBI v0.1")
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
Reviewed-by: Anup Patel <anup@brainfault.org>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
When building with the LLVM linker this error occurrs:
LD arch/riscv/kernel/vdso/vdso-syms.o
ld.lld: error: no input files
This happens because the lld treats -R as an alias to -rpath, as opposed
to ld where -R means --just-symbols.
Use the long option name for compatibility between the two.
Link: https://github.com/ClangBuiltLinux/linux/issues/805
Reported-by: Dmitry Golovin <dima@golovin.in>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Ilie Halip <ilie.halip@gmail.com>
Reviewed-by: Fangrui Song <maskray@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Merge misc fixes from Andrew Morton:
"15 fixes"
* emailed patches from Andrew Morton <akpm@linux-foundation.org>:
tools/vm: fix cross-compile build
coredump: fix null pointer dereference on coredump
mm: shmem: disable interrupt when acquiring info->lock in userfaultfd_copy path
shmem: fix possible deadlocks on shmlock_user_lock
vmalloc: fix remap_vmalloc_range() bounds checks
mm/shmem: fix build without THP
mm/ksm: fix NULL pointer dereference when KSM zero page is enabled
tools/build: tweak unused value workaround
checkpatch: fix a typo in the regex for $allocFunctions
mm, gup: return EINTR when gup is interrupted by fatal signals
mm/hugetlb: fix a addressing exception caused by huge_pte_offset
MAINTAINERS: add an entry for kfifo
mm/userfaultfd: disable userfaultfd-wp on x86_32
slub: avoid redzone when choosing freepointer location
sh: fix build error in mm/init.c
riscv:allnoconfig and riscv:tinyconfig fail to compile.
arch/riscv/kernel/stacktrace.c: In function 'walk_stackframe':
arch/riscv/kernel/stacktrace.c:78:8: error: 'sp_in_global' undeclared
sp_in_global is declared inside CONFIG_FRAME_POINTER but used outside
of it.
Fixes: 52e7c52d2ded ("RISC-V: Stop relying on GCC's register allocator's hueristics")
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Even though commit cfb5d65f2595 ("ARM: dts: dra7: Add bus_dma_limit
for L3 bus") added bus_dma_limit for L3 bus, the PCIe controller
gets incorrect value of bus_dma_limit.
Fix it by adding empty dma-ranges property to axi@0 and axi@1
(parent device tree node of PCIe controller).
Cc: stable@kernel.org
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Since commit bcbb63b80284 ("ARM: dts: dra7: Separate AM57 dtsi files"),
the m_can node was inherited from dra76x.dtsi but the IP is not
connected on the idk board. Disable the node to reflect this.
Signed-off-by: Faiz Abbas <faiz_abbas@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
A direct write to a APxxKey_EL1 register requires a context
synchronization event to ensure that indirect reads made by subsequent
instructions (e.g. AUTIASP, PACIASP) observe the new value.
When we initialize the boot task's APIAKey in boot_init_stack_canary()
via ptrauth_keys_switch_kernel() we miss the necessary ISB, and so there
is a window where instructions are not guaranteed to use the new APIAKey
value. This has been observed to result in boot-time crashes where
PACIASP and AUTIASP within a function used a mixture of the old and new
key values.
Fix this by having ptrauth_keys_switch_kernel() synchronize the new key
value with an ISB. At the same time, __ptrauth_key_install() is renamed
to __ptrauth_key_install_nosync() so that it is obvious that this
performs no synchronization itself.
Fixes: 28321582334c261c ("arm64: initialize ptrauth keys for kernel booting task")
Signed-off-by: Mark Rutland <mark.rutland@arm.com>
Reported-by: Will Deacon <will@kernel.org>
Cc: Amit Daniel Kachhap <amit.kachhap@arm.com>
Cc: Marc Zyngier <maz@kernel.org>
Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Tested-by: Will Deacon <will@kernel.org>
- Fix a regression introduced in the last merge window, which results
in guests in HPT mode dying randomly.
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v2
iQEcBAABCAAGBQJeni/pAAoJEJ2a6ncsY3GfTRoIANAQjIZi96AfJcfnrYQ4yUF7
scxawTiJ9VavvsEJLJ7vsozrJ4xxmvmA0fFWC84uw9+BwPqoLFFvZTjazbGEDVvF
FGwNBR/k7nfFVMIHS3K9iy9KjvYL3xkL26AgFTDJFq8hmOO9pH0txuk4r7SXb+NX
bGG0mScAD/Dg/HwAHAS6EP3jT35QtGTK62p8foqVTziTNcmBn9Ywtg0lEzAcq2iY
Y1BUD4Ov3cggshMI9SqHE8Yyq0XA2Wi6ggcyz/gVzvcbdFQmtg57Tri8nN8661LX
XKh+VTpYSIxNs5GgjwlNesJzJ9h6CSynJF556qrjQ0XsXcNqvn8fcZdNQ+hnRYw=
=Y19W
-----END PGP SIGNATURE-----
Merge tag 'kvm-ppc-fixes-5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc into kvm-master
PPC KVM fix for 5.7
- Fix a regression introduced in the last merge window, which results
in guests in HPT mode dying randomly.
A page table upgrade in a kernel section that uses secondary address
mode will mess up the kernel instructions as follows:
Consider the following scenario: two threads are sharing memory.
On CPU1 thread 1 does e.g. strnlen_user(). That gets to
old_fs = enable_sacf_uaccess();
len = strnlen_user_srst(src, size);
and
" la %2,0(%1)\n"
" la %3,0(%0,%1)\n"
" slgr %0,%0\n"
" sacf 256\n"
"0: srst %3,%2\n"
in strnlen_user_srst(). At that point we are in secondary space mode,
control register 1 points to kernel page table and instruction fetching
happens via c1, rather than usual c13. Interrupts are not disabled, for
obvious reasons.
On CPU2 thread 2 does MAP_FIXED mmap(), forcing the upgrade of page table
from 3-level to e.g. 4-level one. We'd allocated new top-level table,
set it up and now we hit this:
notify = 1;
spin_unlock_bh(&mm->page_table_lock);
}
if (notify)
on_each_cpu(__crst_table_upgrade, mm, 0);
OK, we need to actually change over to use of new page table and we
need that to happen in all threads that are currently running. Which
happens to include the thread 1. IPI is delivered and we have
static void __crst_table_upgrade(void *arg)
{
struct mm_struct *mm = arg;
if (current->active_mm == mm)
set_user_asce(mm);
__tlb_flush_local();
}
run on CPU1. That does
static inline void set_user_asce(struct mm_struct *mm)
{
S390_lowcore.user_asce = mm->context.asce;
OK, user page table address updated...
__ctl_load(S390_lowcore.user_asce, 1, 1);
... and control register 1 set to it.
clear_cpu_flag(CIF_ASCE_PRIMARY);
}
IPI is run in home space mode, so it's fine - insns are fetched
using c13, which always points to kernel page table. But as soon
as we return from the interrupt, previous PSW is restored, putting
CPU1 back into secondary space mode, at which point we no longer
get the kernel instructions from the kernel mapping.
The fix is to only fixup the control registers that are currently in use
for user processes during the page table update. We must also disable
interrupts in enable_sacf_uaccess to synchronize the cr and
thread.mm_segment updates against the on_each-cpu.
Fixes: 0aaba41b58bc ("s390: remove all code using the access register mode")
Cc: stable@vger.kernel.org # 4.15+
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Reviewed-by: Gerald Schaefer <gerald.schaefer@de.ibm.com>
References: CVE-2020-11884
Signed-off-by: Christian Borntraeger <borntraeger@de.ibm.com>
Unlike the other CPUs, CPU0 is never offlined during hibernation, so in the
resume path, the "new" kernel's VP assist page is not suspended (i.e. not
disabled), and later when we jump to the "old" kernel, the page is not
properly re-enabled for CPU0 with the allocated page from the old kernel.
So far, the VP assist page is used by hv_apic_eoi_write(), and is also
used in the case of nested virtualization (running KVM atop Hyper-V).
For hv_apic_eoi_write(), when the page is not properly re-enabled,
hvp->apic_assist is always 0, so the HV_X64_MSR_EOI MSR is always written.
This is not ideal with respect to performance, but Hyper-V can still
correctly handle this according to the Hyper-V spec; nevertheless, Linux
still must update the Hyper-V hypervisor with the correct VP assist page
to prevent Hyper-V from writing to the stale page, which causes guest
memory corruption and consequently may have caused the hangs and triple
faults seen during non-boot CPUs resume.
Fix the issue by calling hv_cpu_die()/hv_cpu_init() in the syscore ops.
Without the fix, hibernation can fail at a rate of 1/300 ~ 1/500.
With the fix, hibernation can pass a long-haul test of 2000 runs.
In the case of nested virtualization, disabling/reenabling the assist
page upon hibernation may be unsafe if there are active L2 guests.
It looks KVM should be enhanced to abort the hibernation request if
there is any active L2 guest.
Fixes: 05bd330a7fd8 ("x86/hyperv: Suspend/resume the hypercall page for hibernation")
Cc: stable@vger.kernel.org
Signed-off-by: Dexuan Cui <decui@microsoft.com>
Link: https://lore.kernel.org/r/1587437171-2472-1-git-send-email-decui@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
Hyper-V on ARM64 doesn't provide a flag for the AEOI recommendation
in ms_hyperv.hints, so having the test in architecture independent
code doesn't work. Resolve this by moving the check of the flag
to an architecture dependent helper function. No functionality is
changed.
Signed-off-by: Michael Kelley <mikelley@microsoft.com>
Link: https://lore.kernel.org/r/20200420164926.24471-1-mikelley@microsoft.com
Signed-off-by: Wei Liu <wei.liu@kernel.org>
If {i,d}-cache-block-size is set and {i,d}-cache-line-size is not, use
the block-size value for both. Per the devicetree spec cache-line-size
is only needed if it differs from the block size.
Originally the code would fallback from block size to line size. An
error message was printed if both properties were missing.
Later the code was refactored to use clearer names and logic but it
inadvertently made line size a required property, meaning on systems
without a line size property we fall back to the default from the
cputable.
On powernv (OPAL) platforms, since the introduction of device tree CPU
features (5a61ef74f269 ("powerpc/64s: Support new device tree binding
for discovering CPU features")), that has led to the wrong value being
used, as the fallback value is incorrect for Power8/Power9 CPUs.
The incorrect values flow through to the VDSO and also to the sysconf
values, SC_LEVEL1_ICACHE_LINESIZE etc.
Fixes: bd067f83b084 ("powerpc/64: Fix naming of cache block vs. cache line")
Cc: stable@vger.kernel.org # v4.11+
Signed-off-by: Chris Packham <chris.packham@alliedtelesis.co.nz>
Reported-by: Qian Cai <cai@lca.pw>
[mpe: Add even more detail to change log]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://lore.kernel.org/r/20200416221908.7886-1-chris.packham@alliedtelesis.co.nz
512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally")
introduced an unintended linker error for i.MX6 configurations that have
ARM_CPU_SUSPEND=n which can happen if neither CONFIG_PM, CONFIG_CPU_IDLE,
nor ARM_PSCI_FW are selected.
Fix this by having v7_cpu_resume() compiled only when cpu_resume() it
calls is available as well.
The C declaration for the function remains unguarded to avoid future code
inadvertently using a stub and introducing a regression to the bug the
original commit fixed.
Cc: <stable@vger.kernel.org>
Fixes: 512a928affd5 ("ARM: imx: build v7_cpu_resume() unconditionally")
Reported-by: Clemens Gruber <clemens.gruber@pqgruber.com>
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some msm8996 based devices are unstable when run with VDD_APC of 1.23V,
which is listed as the maximum voltage in "Turbo" mode. Given that the
CPU cluster is not run in "Turbo" mode, reduce this to 0.98V - the
maximum voltage for nominal operation.
Tested-by: Loic Poulain <loic.poulain@linaro.org>
Fixes: 7a2a2231ef22 ("arm64: dts: apq8096-db820c: Fix VDD core voltage")
Cc: Loic Poulain <loic.poulain@linaro.org>
Link: https://lore.kernel.org/r/20200318054442.3066726-1-bjorn.andersson@linaro.org
Signed-off-by: Bjorn Andersson <bjorn.andersson@linaro.org>
