After commit 9e442aa6a753 ("x86: remove DMA_ERROR_CODE"), the inlining
decisions in the qat driver changed slightly, introducing a new false-positive
warning:
drivers/crypto/qat/qat_common/qat_algs.c: In function 'qat_alg_sgl_to_bufl.isra.6':
include/linux/dma-mapping.h:228:2: error: 'sz_out' may be used uninitialized in this function [-Werror=maybe-uninitialized]
drivers/crypto/qat/qat_common/qat_algs.c:676:9: note: 'sz_out' was declared here
The patch that introduced this is correct, so let's just avoid the
warning in this driver by rearranging the unwinding after an error
to make it more obvious to the compiler what is going on.
The problem here is the 'if (unlikely(dma_mapping_error(dev, blp)))'
check, in which the 'unlikely' causes gcc to forget what it knew about
the state of the variables. Cleaning up the dma state in the reverse
order it was created means we can simplify the logic so it doesn't have
to know about that state, and also makes it easier to understand.
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Christoph Hellwig <hch@lst.de>
krobot warning: make sure that all error return paths release locks.
Signed-off-by: Gary R Hook <gary.hook@amd.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
We want to return negative error codes here, but we're accidentally
propogating the "true" return from dma_mapping_error().
Fixes: 14fa93cdcd9b ("crypto: cavium - Add support for CNN55XX adapters.")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This is the 2nd part of fixing the usage of GFP_KERNEL for memory
allocations, taking care off all the places that haven't caused a real
problem / failure.
Again, the issue being fixed is that GFP_KERNEL should be used only when
MAY_SLEEP flag is set, i.e. MAY_BACKLOG flag usage is orthogonal.
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Changes in the SW cts (ciphertext stealing) code in
commit 0605c41cc53ca ("crypto: cts - Convert to skcipher")
revealed a problem in the CAAM driver:
when cts(cbc(aes)) is executed and cts runs in SW,
cbc(aes) is offloaded in CAAM; cts encrypts the last block
in atomic context and CAAM incorrectly decides to use GFP_KERNEL
for memory allocation.
Fix this by allowing GFP_KERNEL (sleeping) only when MAY_SLEEP flag is
set, i.e. remove MAY_BACKLOG flag.
We split the fix in two parts - first is sent to -stable, while the
second is not (since there is no known failure case).
Link: http://lkml.kernel.org/g/20170602122446.2427-1-david@sigma-star.at
Cc: <stable@vger.kernel.org> # 4.8+
Reported-by: David Gstir <david@sigma-star.at>
Signed-off-by: Horia Geantă <horia.geanta@nxp.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
2376 808 128 3312 cf0 drivers/crypto/caam/jr.o
File size after constify caam_jr_match:
text data bss dec hex filename
2976 192 128 3296 ce0 drivers/crypto/caam/jr.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
You can't reach init() if parent alg_name is invalid. Moreover,
cypto_alloc_base() will return ENOENT if alg_name is NULL.
Found while grasping the fallback mechanism.
Signed-off-by: Tudor Ambarus <tudor.ambarus@microchip.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
of_device_ids are not supposed to change at runtime. All functions
working with of_device_ids provided by <linux/of.h> work with const
of_device_ids. So mark the non-const structs as const.
File size before:
text data bss dec hex filename
2001 2168 48 4217 1079 drivers/crypto/n2_core.o
File size after constify dummy_tlb_ops.:
text data bss dec hex filename
3601 536 48 4185 1059 drivers/crypto/n2_core.o
Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A base_end pointer is set and provided. Use it in the ring rollback
function to avoid using build-in defines.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Increase the batch size to the maximum number of requests a ring can
handle at a time (its size). This is possible now that the request
queues are per hw ring. This improves performances.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This force the need_dequeue flag to be unset whenever the dequeue
function is called, to avoid calling it when it is not necessary.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Get the backlog before dequeuing the request otherwise we'll miss the
first request in line.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This update the dequeue function of the inside-secure safexcel driver so
that failed requests aren't requeued when they fail (for whatever
reason, which can be because the hw ring is full).
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the inside-secure safexcel driver from using one global queue to
one queue per hw ring. This ease the request management and keep the hw
in sync with what's done in sw.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
This move the context and request updates at the end of the cipher and
hash send() functions. This way the context and request fields are set
only when everything else was successful in the send() functions.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The cipher and hash send functions both set the results variable, to be
used later by the caller. Align the way they're setting this variable.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Configure the data write bufferability to always buffer packets in the
DSE. This change slightly improves performance.
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When enable_single_wr is not enabled, the DSE will only write those
parts of a result descriptor that need updating, which means a final
result descriptor will be written in 2 or 3 smaller transfers.
When enable_single_wr is enabled the DSE will combine these 2-3
updates into one large write transfer, generally improving performance.
Signed-off-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Set the correct value to the DSE data cache, using WR_CACHE_3BITS
instead of RD_CACHE_3BITS. This fixes an incorrect setting and helps
improving performances.
Reported-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The EIP197_HIA_xDR_CFG_WR_CACHE macro was defined to use an offset of
23, which is wrong as it's actually 25. Fix this.
Reported-by: Igal Liberman <igall@marvell.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace the hmac ipad/opad values by their defined constants.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When multiple devices are present in system select device
in round-robin fashion for crypto operations
Signed-off-by: Atul Gupta <atul.gupta@chelsio.com>
Reviewed-by: Ganesh Goudar <ganeshgr@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Allocate new sg list in case received destination sg list has entry
greater that 2k.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
It send multiple WRs to H/W to handle large sg lists. Adds ctr(aes)
and rfc(ctr(aes)) modes.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
GCM and CBC mode of operation requires Last Cipher Block.
This patch set lcb bit in WR header when required.
Signed-off-by: Harsh Jain <harsh@chelsio.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Trivial fix to spelling mistake in seq_printf message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Trivial fix to spelling mistake in pr_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
If 'kzalloc' fails, we return 0 which means success.
return -ENOMEM instead as already done a few lines above.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Trivial fix to spelling mistake in flow_log message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Steve Lin <steven.lin1@broadcom.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The run-time self-tests fail quite early, as soon as the input block
size is larger than 64 bytes:
alg: hash: Test 4 failed for sha1-sun4i-ss
00000000: b9 c9 1e 52 c0 26 d8 39 81 ff f2 3c 99 b1 27 b2
00000010: 30 d6 c9 85
One thing to notice is the value of the last word, which is the one
expected (it can sometime be the last two words). The datasheet isn't
very clear about when the digest is ready to retrieve and is seems the
bit SS_DATA_END is cleared when the digest was computed *but* that
doesn't mean the digest is ready to retrieve in the registers.
A ndelay(1) is added before reading the computed digest to ensure it is
available in the SS_MD[] registers.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
The CRYPTO_ALG_KERN_DRIVER_ONLY flag is set for hardware accelerated
ciphers accessible through a kernel driver only. This is the case for
ciphers exposed by the sun4i-ss driver. This patch sets this flag.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Update the sun4i-ss driver to use the skcipher API instead of the old
ablkcipher one. It's a bit more tricky than s/ablkcipher/skcipher/, but
still nothing special and the driver's logic stays the same.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Use the GENMASK helper instead of custom calculations to generate masks,
It also helps the readability.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
A bit is appended at the end of the input buffer for sha1. Simplify the
code assigning it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
When sending the last block of data to the engine, it should be padded
so that the total length of the request can be given to the engine as
the last 2 words of the last 64 bytes block.
Simplify the calculation of this pad offset.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Parts of the bf buffer were dynamically set to 0. Change this to set the
whole buffer to 0 by default to avoid any mistake.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Do not use DMA is the request is 0 length.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Replace custom bit shifts and masks with lower/upper_32_bits helpers.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cosmetic clean up if conditional checks on 0s values.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Cosmetic change to avoid having a full screen a variable definitions. It
also helps to see which variables share the same type.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Acked-by: Corentin Labbe <clabbe.montjoie@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Drop .owner field in mtk_crypto_driver, since platform_driver_register()
will set it automatically.
Signed-off-by: Geliang Tang <geliangtang@gmail.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Add more algorithm support for the driver.
Add support for ecb(aes), cfb(aes) and ecb(des3_ede).
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Remove the individual encrypt/decrypt function for easch algorithm.
This is in prepration of adding more crypto algorithms supported by
hardware. While at that simplify create_ctx_hdr/create_input_list
function interfaces.
Signed-off-by: George Cherian <george.cherian@cavium.com>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
