8afc66e8d4
1133416 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Al Viro
|
369c1634cc |
ksmbd: don't open-code %pD
a bunch of places used %pd with file->f_path.dentry; shorter (and saner) way to spell that is %pD with file... Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
|
Al Viro
|
2f5930c1d7 |
ksmbd: don't open-code file_path()
Acked-by: Namjae Jeon <linkinjeon@kernel.org> Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: Steve French <stfrench@microsoft.com> |
||
Linus Torvalds
|
2bca25eaeb |
spi: Updates for v6.1
With the exception of some refactoring to fix long standing issues
where we weren't handling cache syncs properly for messages which had
PIO and DMA transfers going to the same page correctly there has been o
work on the core this time around, and it's also been quite a quiet
release for the drivers too:
- Fix cache syncs for cases where we have DMA and PIO transfers in the
same message going to the same page.
- Update the fsl_spi driver to use transfer_one() rather than a custom
transfer function.
- Support for configuring transfer speeds with the AMD SPI controller.
- Support for a second chip select and 64K erase on Intel SPI.
- Support for Microchip coreQSPI, Nuvoton NPCM845, NXP i.MX93, and
Rockchip RK3128 and RK3588.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM62YIACgkQJNaLcl1U
h9CvPAf+MF1AzJJWH9DkR846KQh7Zt1rrujRuj5SGwvHewqjJcDtDmipAbM7mRFa
VPk6fCzfRE4btVywCDMEQX2ToB9VKBNUeP8ihVLddWrTddbkQ7hOKlTrz31dJ+6W
F9kwXkWcqWEpMYD/wr/25eT/kkNfv27oCyPU4dRQKoGGeF+zb9jYoj0+gPDl9Om8
ok7D1XAwY1wOqYqdPfl2thcUrBfoKtFvkTj+NNhqwuzWwIqfQHM2skwAjmD3fliQ
lLdRc54erCOqukDddIoWr348TyJIT4v1IXnkqY3cd7da6+kpixWae73o/7WIcQUR
4MrtPply0WWcapgU/46sCbHpjJNjjg==
=PDCv
-----END PGP SIGNATURE-----
Merge tag 'spi-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"With the exception of some refactoring to fix long standing issues
where we weren't handling cache syncs properly for messages which had
PIO and DMA transfers going to the same page correctly there has been
no work on the core this time around, and it's also been quite a quiet
release for the drivers too:
- Fix cache syncs for cases where we have DMA and PIO transfers in
the same message going to the same page
- Update the fsl_spi driver to use transfer_one() rather than a
custom transfer function
- Support for configuring transfer speeds with the AMD SPI controller
- Support for a second chip select and 64K erase on Intel SPI
- Support for Microchip coreQSPI, Nuvoton NPCM845, NXP i.MX93, and
Rockchip RK3128 and RK3588"
* tag 'spi-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (73 commits)
spi: Ensure that sg_table won't be used after being freed
spi: spi-gxp: Use devm_platform_ioremap_resource()
spi: s3c64xx: Fix large transfers with DMA
spi: Split transfers larger than max size
spi: Fix cache corruption due to DMA/PIO overlap
spi: Save current RX and TX DMA devices
spi: mt65xx: Add dma max segment size declaration
spi: migrate mt7621 text bindings to YAML
spi: renesas,sh-msiof: Add r8a779g0 support
spi: spi-fsl-qspi: Use devm_platform_ioremap_resource_byname()
spi: spi-fsl-lpspi: Use devm_platform_get_and_ioremap_resource()
spi: spi-fsl-dspi: Use devm_platform_get_and_ioremap_resource()
spi/omap100k:Fix PM disable depth imbalance in omap1_spi100k_probe
spi: dw: Fix PM disable depth imbalance in dw_spi_bt1_probe
spi: cadence-quadspi: Fix PM disable depth imbalance in cqspi_probe
spi: s3c24xx: Switch to use devm_spi_alloc_master()
spi: xilinx: Switch to use devm_spi_alloc_master()
spi: img-spfi: using pm_runtime_resume_and_get instead of pm_runtime_get_sync
spi: aspeed: Remove redundant dev_err call
spi: spi-mpc52xx: switch to using gpiod API
...
|
||
|
Linus Torvalds
|
d40c874573 |
regulator: Updates for v6.1
The core work this time around has mostly been around the code to manage
regulator modes, simplifying the interface for configuring modes to not
take account of the voltage and as a side effect resolving a
bootstrapping issue on systems where we can't read the voltage from the
regulator. Otherwise it's been quite a quiet release with some new
drivers and a devm helper:
- Make the load handling in the Qualcomm RPMH regulators much more
idiomatic and general cleanups to the handling of load configuration.
- devm helper for a combined get and enable operation.
- Support for MediaTek MT6331, Qualcomm PM660, 660L and PM6125, Texas
Instruments TPS65219.
-----BEGIN PGP SIGNATURE-----
iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM61ZQACgkQJNaLcl1U
h9BGggf+MraXhaTOSrLCzKYjcsjIZ2OCzySoKPdh9PdvnKc2PX+vIi6SYjq6zeAe
OlwDvKzW+bR6VRTStSskK5wRXrLn/9eo25GhZyl4BpAR+vjGBtzlNagk3gGTBKMj
ua/kb16FV+15Zg5L1qO35ka9BuCzs2Bfz9OoZKy4vtuqVqazmrU3PS8nr/kAlW9R
fi7a50Ybc+W7xBYUNuaKqdFQWlblLh/UKqImV9dANokXZDD9deJ8BeWq/FttNY6T
lyTJGDuKYhcvb7wx8QdzcSCoLsdVPRi0cmIlbjiusWogyvJBQVhto338Y8+b7vIJ
29tlD54gmWXSxwf0e8CpHKh/BxwbAw==
=YFsi
-----END PGP SIGNATURE-----
Merge tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"The core work this time around has mostly been around the code to
manage regulator modes, simplifying the interface for configuring
modes to not take account of the voltage and as a side effect
resolving a bootstrapping issue on systems where we can't read the
voltage from the regulator.
Otherwise it's been quite a quiet release with some new drivers and a
devm helper:
- Make the load handling in the Qualcomm RPMH regulators much more
idiomatic and general cleanups to the handling of load
configuration
- devm helper for a combined get and enable operation
- Support for MediaTek MT6331, Qualcomm PM660, 660L and PM6125, Texas
Instruments TPS65219"
* tag 'regulator-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (45 commits)
dt-bindings: gpio-regulator: add vin-supply property support
regulator: gpio: Add input_supply support in gpio_regulator_config
regulator: tps65219: Fix is_enabled checking in tps65219_set_bypass
regulator: qcom,rpmh: add pm660 and pm660l pmics
regulator: qcom-rpmh: add pm660 and pm660l pmics
regulator: of: Fix kernel-doc
regulator: of: Fix kernel-doc
regulator: Add driver for MT6332 PMIC regulators
regulator: Add bindings for MT6332 regulator
regulator: Add driver for MT6331 PMIC regulators
regulator: Add bindings for MT6331 regulator
regulator: tps65219: Fix .bypass_val_on setting
regulator: qcom_rpm: Fix circular deferral regression
regulator: core: Prevent integer underflow
regulator: dt-bindings: qcom,rpmh: Indicate regulator-allow-set-load dependencies
regulator: bd9576: switch to using devm_fwnode_gpiod_get()
regulator: bd71815: switch to using devm_fwnode_gpiod_get()
regulator: core: Fix regulator supply registration with sysfs
regulator: tps65219: change tps65219_regulator_irq_types to static
regulator: core: Don't err if allow-set-load but no allowed-modes
...
|
||
|
Linus Torvalds
|
521d04e3c8 |
regmap: Updates for v6.1
This has been a busy release for regmap with one thing and other, there's been an especially large interest in MMIO regmaps for some reason. The bulk of the changes are cleanups but there are several user visible changes too: - Support for I/O ports in regmap-mmio. - Support for accelerated noinc operations in regmap-mmio. - Support for tracing the register values in bulk operations. -----BEGIN PGP SIGNATURE----- iQEzBAABCgAdFiEEreZoqmdXGLWf4p/qJNaLcl1Uh9AFAmM6sskACgkQJNaLcl1U h9Bj1Qf+PLNz4gQq7ki06KI6+Liz6daN5j/bfUGSizx6rns5qOZxt1A/CwDFM5ZR 6aY+tGL4ksYfEUEZHsr7qaQKptWoLmwDVX0oYZqHdBf4Wf7I6iht8WCq68KwDCzz zQoswzoLmVuRd6aplFifEF3SOqjBrTQO3gkXBteIeA6/i1pwO9wOJdM4ZU54FX+Q zexv7H/E9uKVonrViBMLPczaPhge4+ILNEDekSUW4AZ0RmUZ6JjW3aOZbwR6ut1x 7bS3ric9xGhW4IQdOZISY+ARhPPworcgdK5GoqBfjWV2vYc0c1iCawvF73Wm/NJC GMGc5FIBi3a82oCMmSR1dAcci9CRLw== =TTeQ -----END PGP SIGNATURE----- Merge tag 'regmap-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap Pull regmap updates from Mark Brown: "This has been a busy release for regmap with one thing and other, there's been an especially large interest in MMIO regmaps for some reason. The bulk of the changes are cleanups but there are several user visible changes too: - Support for I/O ports in regmap-mmio - Support for accelerated noinc operations in regmap-mmio - Support for tracing the register values in bulk operations" * tag 'regmap-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap: regmap: mmio: replace return 0 with break in switch statement regmap: spi-avmm: Use swabXX_array() helpers regmap: mmio: Use swabXX_array() helpers swab: Add array operations regmap: trace: Remove unneeded blank lines regmap: trace: Remove explicit castings regmap: trace: Remove useless check for NULL for bulk ops regmap: mmio: Fix rebase error regmap: check right noinc bounds in debug print regmap: introduce value tracing for regmap bulk operations regmap/hexagon: Properly fix the generic IO helpers regmap: mmio: Support accelerared noinc operations regmap: Support accelerated noinc operations regmap: Make use of get_unaligned_be24(), put_unaligned_be24() regmap: mmio: Fix MMIO accessors to avoid talking to IO port regmap: mmio: Introduce IO accessors that can talk to IO port regmap: mmio: Get rid of broken 64-bit IO regmap: mmio: Remove mmio_relaxed member from context |
||
|
Linus Torvalds
|
0baf6dcc02 |
hwmon updates for v6.1
* New drivers
- Driver for MAX31760 fan speed controller
- Driver for TEXAS TPS546D24 Buck Converter
- Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller
* Removed drivers
- Drop obsolete asus_wmi_ec_sensors driver
* Cleanups, affecting various drivers
- Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate
- Remove forward declarations
- Move from strlcpy with unused retval to strscpy
- Make use of devm_clk_get_enabled()
- Drop devm_of_pwm_get()
* Other notable cleanup and improvements
- Support for additional USB devide ID and support for reporting
of rail mode via debugfs added to corsair-psu driver
- Support for aditional USB ID in nzxt-smart2 driver
- Support for Aquacomputer High Flow Next in aquacomputer_d5next driver
- Major cleanup of pwm-fan driver
- Major cleanup of mr75203 driver, and added support for new device revision
* Various other minor fixes and cleanups
-----BEGIN PGP SIGNATURE-----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=8u0w
-----END PGP SIGNATURE-----
Merge tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
"New drivers:
- Driver for MAX31760 fan speed controller
- Driver for TEXAS TPS546D24 Buck Converter
- Driver for EMC2301/2/3/5 RPM-based PWM Fan Speed Controller
Removed drivers:
- Drop obsolete asus_wmi_ec_sensors driver
Cleanups, affecting various drivers:
- Use DEFINE_SIMPLE_DEV_PM_OPS where appropriate
- Remove forward declarations
- Move from strlcpy with unused retval to strscpy
- Make use of devm_clk_get_enabled()
- Drop devm_of_pwm_get()
Other notable cleanup and improvements:
- Support for additional USB devide ID and support for reporting of
rail mode via debugfs added to corsair-psu driver
- Support for aditional USB ID in nzxt-smart2 driver
- Support for Aquacomputer High Flow Next in aquacomputer_d5next
driver
- Major cleanup of pwm-fan driver
- Major cleanup of mr75203 driver, and added support for new device
revision
And various other minor fixes and cleanups"
* tag 'hwmon-for-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (86 commits)
hwmon: (corsair-psu) add USB id of new revision of the HX1000i psu
hwmon: (pmbus/mp2888) Fix sensors readouts for MPS Multi-phase mp2888 controller
dt-bindings: hwmon: sensirion,shtc1: Clean up spelling mistakes and grammar
hwmon: (nct6683) remove unused variable in nct6683_create_attr_group
hwmon: w83627hf: Reorder symbols to get rid of a few forward declarations
hwmon: (ina3221) Use DEFINE_RUNTIME_DEV_PM_OPS() and pm_ptr()
hwmon: (w83627ehf) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp108) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp103) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (tmp102) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (pwm-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (nct6775) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max6639) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31730) witch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (max31722) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (ltc2947) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (lm90) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (it87) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (gpio-fan) Switch to DEFINE_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
hwmon: (adt7x10) Switch to EXPORT_SIMPLE_DEV_PM_OPS() and pm_sleep_ptr()
...
|
||
|
Linus Torvalds
|
b86406d42a |
* 'remove' callback converted to return void. Big change with trivial
fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. * new driver for Microchip PCI1xxxx switch * heavy refactoring of the Mellanox BlueField driver * we prefer async probe in the i801 driver now * the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEOZGx6rniZ1Gk92RdFA3kzBSgKbYFAmM7T3IACgkQFA3kzBSg KbYnAxAAn2SXzpUuuJ05hhk/y89RWHhzSilU+7d+egYfQJlbXUl2WzYx/Wu1BSZM ciyXuJFIiTywdUiX1r1VeMO80zmQQZXAUG7VygAtOSk7iPSd/qTyL+7J+k1DXADI hGR+pZLBVfTFyY3d1qHnwKFkzByvQjc2raARv9g7kDxkSQa8xI/sXScmhGYtrLch DUYUK1F3Sdqbk0FsudJ5Jvd7bZCSS+n+jSR+mrZaOXbkUD4JmDUauW8pAS6UI9in CxnjZoOLMHdAmC9ADanLeDRXxKz23uNU/9vdZ1/DMYnNsF/TnyWl6Rz/3BFE3YFk Vq7A1XAK4b3oJAgM92mdvKSkmzBIzkmj02vaVyuNPtRgHZo5MsIcEnWiBhymZY5g W6BPrjt/8YKRKeNlP/nrZmageklepsXZbUrNQt1ws8i4bbT+CKInKbjKLnBfDgVz 5VSd8M9+y2Jd/JaJhMt9TBNmP0W2RrThxLF06Hux1ue7k4maE7Eljvkzcd4GJ6Un HYePZMhwCx3aeYsFmFT/V3kHFsfyHUlIFy/vgXTEICsKUpyj/dX96ANWhe+tJdcX Cknmc+XOVGPm0LPPju4M8WScMjSqNODm1yfDWUe2cRKlxzI45v6x4Oxl8rWD9hb4 KKMGXit0LOtWETlHALffwFCifs6DdaaA0IMUtMQUj8egvys0enE= =arni -----END PGP SIGNATURE----- Merge tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux Pull i2c updates from Wolfram Sang: - 'remove' callback converted to return void. Big change with trivial fixes all over the tree. Other subsystems depending on this change have been asked to pull an immutable topic branch for this. - new driver for Microchip PCI1xxxx switch - heavy refactoring of the Mellanox BlueField driver - we prefer async probe in the i801 driver now - the rest is usual driver updates (support for more SoCs, some refactoring, some feature additions) * tag 'i2c-for-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux: (37 commits) i2c: pci1xxxx: prevent signed integer overflow i2c: acpi: Replace zero-length array with DECLARE_FLEX_ARRAY() helper i2c: i801: Prefer async probe i2c: designware-pci: Use standard pattern for memory allocation i2c: designware-pci: Group AMD NAVI quirk parts together i2c: microchip: pci1xxxx: Add driver for I2C host controller in multifunction endpoint of pci1xxxx switch docs: i2c: slave-interface: return errno when handle I2C_SLAVE_WRITE_REQUESTED i2c: mlxbf: remove device tree support i2c: mlxbf: support BlueField-3 SoC i2c: cadence: Add standard bus recovery support i2c: mlxbf: add multi slave functionality i2c: mlxbf: support lock mechanism macintosh/ams: Adapt declaration of ams_i2c_remove() to earlier change i2c: riic: Use devm_platform_ioremap_resource() i2c: mlxbf: remove IRQF_ONESHOT dt-bindings: i2c: rockchip: add rockchip,rk3128-i2c dt-bindings: i2c: renesas,rcar-i2c: Add r8a779g0 support i2c: tegra: Add GPCDMA support i2c: scmi: Convert to be a platform driver i2c: rk3x: Add rv1126 support ... |
||
Nicholas Piggin
|
b2e82e495a |
powerpc/64s/interrupt: Fix stack frame regs marker
The value of the stack frame regs marker that gets saved on the stack in
interrupt entry code does not match the regs marker value, which breaks
stack frame marker matching.
This stray instruction looks to have been introduced in a mismerge.
Fixes:
|
||
Arnd Bergmann
|
40a5af128a |
Samsung DTS ARM and ARM64 changes for v6.1
Late cleanup and fixes for Samsung DTS:
1. Fix polarity of pins:
- enable GPIO of NFC chip in Exynos5433 TM2 boards,
- vbus GPIO of EHCI in Exynos4412 Origen board.
2. Correct name of pin configuration nodes - redundant "pins" in the
name (no functional impact).
-----BEGIN PGP SIGNATURE-----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=Se/Q
-----END PGP SIGNATURE-----
gpgsig -----BEGIN PGP SIGNATURE-----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=HF5T
-----END PGP SIGNATURE-----
Merge tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux into arm/dt
Samsung DTS ARM and ARM64 changes for v6.1
Late cleanup and fixes for Samsung DTS:
1. Fix polarity of pins:
- enable GPIO of NFC chip in Exynos5433 TM2 boards,
- vbus GPIO of EHCI in Exynos4412 Origen board.
2. Correct name of pin configuration nodes - redundant "pins" in the
name (no functional impact).
* tag 'samsung-dt-dt64-6.1-2' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
ARM: dts: s5pv210: correct double "pins" in pinmux node
ARM: dts: exynos: fix polarity of VBUS GPIO of Origen
arm64: dts: exynos: fix polarity of "enable" line of NFC chip in TM2
Link: https://lore.kernel.org/r/20221003073916.12588-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
|
||
|
Linus Torvalds
|
0326074ff4 |
Networking changes for 6.1.
Core
----
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO.
This significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF
---
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions.
Expose crash_kexec() to allow BPF to trigger a kernel dump.
Use CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs.
Only structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols
---------
- WiFi: more Extremely High Throughput (EHT) and Multi-Link
Operation (MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state
and RST packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API
----------
- Allow selecting the conduit interface used by each port
in DSA switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting
per traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one
of the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much
as possible. It's one of those magic knobs which seemed like
a good idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers
----------------------
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers
-------
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay
window offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
-----BEGIN PGP SIGNATURE-----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=Gsio
-----END PGP SIGNATURE-----
Merge tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next
Pull networking updates from Jakub Kicinski:
"Core:
- Introduce and use a single page frag cache for allocating small skb
heads, clawing back the 10-20% performance regression in UDP flood
test from previous fixes.
- Run packets which already went thru HW coalescing thru SW GRO. This
significantly improves TCP segment coalescing and simplifies
deployments as different workloads benefit from HW or SW GRO.
- Shrink the size of the base zero-copy send structure.
- Move TCP init under a new slow / sleepable version of DO_ONCE().
BPF:
- Add BPF-specific, any-context-safe memory allocator.
- Add helpers/kfuncs for PKCS#7 signature verification from BPF
programs.
- Define a new map type and related helpers for user space -> kernel
communication over a ring buffer (BPF_MAP_TYPE_USER_RINGBUF).
- Allow targeting BPF iterators to loop through resources of one
task/thread.
- Add ability to call selected destructive functions. Expose
crash_kexec() to allow BPF to trigger a kernel dump. Use
CAP_SYS_BOOT check on the loading process to judge permissions.
- Enable BPF to collect custom hierarchical cgroup stats efficiently
by integrating with the rstat framework.
- Support struct arguments for trampoline based programs. Only
structs with size <= 16B and x86 are supported.
- Invoke cgroup/connect{4,6} programs for unprivileged ICMP ping
sockets (instead of just TCP and UDP sockets).
- Add a helper for accessing CLOCK_TAI for time sensitive network
related programs.
- Support accessing network tunnel metadata's flags.
- Make TCP SYN ACK RTO tunable by BPF programs with TCP Fast Open.
- Add support for writing to Netfilter's nf_conn:mark.
Protocols:
- WiFi: more Extremely High Throughput (EHT) and Multi-Link Operation
(MLO) work (802.11be, WiFi 7).
- vsock: improve support for SO_RCVLOWAT.
- SMC: support SO_REUSEPORT.
- Netlink: define and document how to use netlink in a "modern" way.
Support reporting missing attributes via extended ACK.
- IPSec: support collect metadata mode for xfrm interfaces.
- TCPv6: send consistent autoflowlabel in SYN_RECV state and RST
packets.
- TCP: introduce optional per-netns connection hash table to allow
better isolation between namespaces (opt-in, at the cost of memory
and cache pressure).
- MPTCP: support TCP_FASTOPEN_CONNECT.
- Add NEXT-C-SID support in Segment Routing (SRv6) End behavior.
- Adjust IP_UNICAST_IF sockopt behavior for connected UDP sockets.
- Open vSwitch:
- Allow specifying ifindex of new interfaces.
- Allow conntrack and metering in non-initial user namespace.
- TLS: support the Korean ARIA-GCM crypto algorithm.
- Remove DECnet support.
Driver API:
- Allow selecting the conduit interface used by each port in DSA
switches, at runtime.
- Ethernet Power Sourcing Equipment and Power Device support.
- Add tc-taprio support for queueMaxSDU parameter, i.e. setting per
traffic class max frame size for time-based packet schedules.
- Support PHY rate matching - adapting between differing host-side
and link-side speeds.
- Introduce QUSGMII PHY mode and 1000BASE-KX interface mode.
- Validate OF (device tree) nodes for DSA shared ports; make
phylink-related properties mandatory on DSA and CPU ports.
Enforcing more uniformity should allow transitioning to phylink.
- Require that flash component name used during update matches one of
the components for which version is reported by info_get().
- Remove "weight" argument from driver-facing NAPI API as much as
possible. It's one of those magic knobs which seemed like a good
idea at the time but is too indirect to use in practice.
- Support offload of TLS connections with 256 bit keys.
New hardware / drivers:
- Ethernet:
- Microchip KSZ9896 6-port Gigabit Ethernet Switch
- Renesas Ethernet AVB (EtherAVB-IF) Gen4 SoCs
- Analog Devices ADIN1110 and ADIN2111 industrial single pair
Ethernet (10BASE-T1L) MAC+PHY.
- Rockchip RV1126 Gigabit Ethernet (a version of stmmac IP).
- Ethernet SFPs / modules:
- RollBall / Hilink / Turris 10G copper SFPs
- HALNy GPON module
- WiFi:
- CYW43439 SDIO chipset (brcmfmac)
- CYW89459 PCIe chipset (brcmfmac)
- BCM4378 on Apple platforms (brcmfmac)
Drivers:
- CAN:
- gs_usb: HW timestamp support
- Ethernet PHYs:
- lan8814: cable diagnostics
- Ethernet NICs:
- Intel (100G):
- implement control of FCS/CRC stripping
- port splitting via devlink
- L2TPv3 filtering offload
- nVidia/Mellanox:
- tunnel offload for sub-functions
- MACSec offload, w/ Extended packet number and replay window
offload
- significantly restructure, and optimize the AF_XDP support,
align the behavior with other vendors
- Huawei:
- configuring DSCP map for traffic class selection
- querying standard FEC statistics
- querying SerDes lane number via ethtool
- Marvell/Cavium:
- egress priority flow control
- MACSec offload
- AMD/SolarFlare:
- PTP over IPv6 and raw Ethernet
- small / embedded:
- ax88772: convert to phylink (to support SFP cages)
- altera: tse: convert to phylink
- ftgmac100: support fixed link
- enetc: standard Ethtool counters
- macb: ZynqMP SGMII dynamic configuration support
- tsnep: support multi-queue and use page pool
- lan743x: Rx IP & TCP checksum offload
- igc: add xdp frags support to ndo_xdp_xmit
- Ethernet high-speed switches:
- Marvell (prestera):
- support SPAN port features (traffic mirroring)
- nexthop object offloading
- Microchip (sparx5):
- multicast forwarding offload
- QoS queuing offload (tc-mqprio, tc-tbf, tc-ets)
- Ethernet embedded switches:
- Marvell (mv88e6xxx):
- support RGMII cmode
- NXP (felix):
- standardized ethtool counters
- Microchip (lan966x):
- QoS queuing offload (tc-mqprio, tc-tbf, tc-cbs, tc-ets)
- traffic policing and mirroring
- link aggregation / bonding offload
- QUSGMII PHY mode support
- Qualcomm 802.11ax WiFi (ath11k):
- cold boot calibration support on WCN6750
- support to connect to a non-transmit MBSSID AP profile
- enable remain-on-channel support on WCN6750
- Wake-on-WLAN support for WCN6750
- support to provide transmit power from firmware via nl80211
- support to get power save duration for each client
- spectral scan support for 160 MHz
- MediaTek WiFi (mt76):
- WiFi-to-Ethernet bridging offload for MT7986 chips
- RealTek WiFi (rtw89):
- P2P support"
* tag 'net-next-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1864 commits)
eth: pse: add missing static inlines
once: rename _SLOW to _SLEEPABLE
net: pse-pd: add regulator based PSE driver
dt-bindings: net: pse-dt: add bindings for regulator based PoDL PSE controller
ethtool: add interface to interact with Ethernet Power Equipment
net: mdiobus: search for PSE nodes by parsing PHY nodes.
net: mdiobus: fwnode_mdiobus_register_phy() rework error handling
net: add framework to support Ethernet PSE and PDs devices
dt-bindings: net: phy: add PoDL PSE property
net: marvell: prestera: Propagate nh state from hw to kernel
net: marvell: prestera: Add neighbour cache accounting
net: marvell: prestera: add stub handler neighbour events
net: marvell: prestera: Add heplers to interact with fib_notifier_info
net: marvell: prestera: Add length macros for prestera_ip_addr
net: marvell: prestera: add delayed wq and flush wq on deinit
net: marvell: prestera: Add strict cleanup of fib arbiter
net: marvell: prestera: Add cleanup of allocated fib_nodes
net: marvell: prestera: Add router nexthops ABI
eth: octeon: fix build after netif_napi_add() changes
net/mlx5: E-Switch, Return EBUSY if can't get mode lock
...
|
||
Anup Patel
|
e623715f3d
|
RISC-V: Increase range and default value of NR_CPUS
Currently, the range and default value of NR_CPUS is too restrictive for high-end RISC-V systems with large number of HARTs. The latest QEMU virt machine supports upto 512 CPUs so the current NR_CPUS is restrictive for QEMU as well. Other major architectures (such as ARM64, x86_64, MIPS, etc) have a much higher range and default value of NR_CPUS. This patch increases NR_CPUS range to 2-512 and default value to XLEN (i.e. 32 for RV32 and 64 for RV64). Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Heinrich Schuchardt <heinrich.schuchardt@canonical.com> Link: https://lore.kernel.org/r/20220420112408.155561-1-apatel@ventanamicro.com/ Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com> |
||
|
Linus Torvalds
|
522667b24f |
Landlock updates for v6.1-rc1
-----BEGIN PGP SIGNATURE----- iIYEABYIAC4WIQSVyBthFV4iTW/VU1/l49DojIL20gUCYzxenhAcbWljQGRpZ2lr b2QubmV0AAoJEOXj0OiMgvbSYpMA/iWIaLAS5P1Hh5/42NKGjsxwt9sNM6tKivYP gJidPsq5AQCzj/21kMLPVMxCauKvMRPs84wvLd6W7JwjJvGsigefCg== =pDda -----END PGP SIGNATURE----- Merge tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux Pull landlock updates from Mickaël Salaün: "Improve user help for Landlock (documentation and sample)" * tag 'landlock-6.1-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/mic/linux: landlock: Fix documentation style landlock: Slightly improve documentation and fix spelling samples/landlock: Print hints about ABI versions |
||
|
Linus Torvalds
|
c645c11a2d |
audit/stable-6.1 PR 20221003
-----BEGIN PGP SIGNATURE-----
iQJIBAABCAAyFiEES0KozwfymdVUl37v6iDy2pc3iXMFAmM68bIUHHBhdWxAcGF1
bC1tb29yZS5jb20ACgkQ6iDy2pc3iXN1/Q/+L0xoduzZg6u8cpkVrBmqPmhFFxDi
580v69CUcXa29+sxVpH7rPJIhaR/EK/UrdNTVgGa+cvo11StgzuieY3Ds3gzfhmf
7G7fvZtiloZ1SWnfUMuk3NxNCWBHGE7CE2l+CgWqKmWuOlXcHyq81ydJ1Aydr8Gr
qJhGPf+StC2XxXGlsAqKHboxTRbFDREFKrKllF2XYOiNNcGoyNcmeSoLGzTweWTx
52YbtiUtjOk4r482QJKwGRxmKLfFPeMDr7BZmB8acZasp+o0nLF9yaFlSUEmiwZO
XMIqszdhywAhe0z+WAy6TnoQSHWkHKILa2+R2se7XB+EpEWie01bOfsYqg21Pgt8
HzcQ9edsiykCtXmgZLTt6K1+aKvBaY2R0kKtBhNR7Rn8XyfR5f9VCVE+YNCZAVxu
OiQdvFX/etAc0bWAJzgDL1r3mHkMGmsyg+s1rXQoNnaAIK3t9VBCgKndWkoblHGF
jnoUceU17RZiuqwwjp4FSSniX/1yHexIPGHvYY7lwrgbDeBgiZpOJM1mVZqW3ShE
X+xgWyYIaLGndavzn41dzaa8irfRpvzWE3xywnghJx6BDGKwAkSX/yBpE3EzXirf
nUE+50g919U27DWsWwm2ev+DkJwdb1d11jRRJbcNqHOqN3FCEmSGQAAl0h79Bib8
+/V0XWZ1tFOjPkE=
=52r/
-----END PGP SIGNATURE-----
Merge tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit
Pull audit updates from Paul Moore:
"Six audit patches for v6.1, most are pretty trivial, but a quick list
of the highlights are below:
- Only free the audit proctitle information on task exit. This allows
us to cache the information and improve performance slightly.
- Use the time_after() macro to do time comparisons instead of doing
it directly and potentially causing ourselves problems when the
timer wraps.
- Convert an audit_context state comparison from a relative enum
comparison, e.g. (x < y), to a not-equal comparison to ensure that
we are not caught out at some unknown point in the future by an
enum shuffle.
- A handful of small cleanups such as tidying up comments and
removing unused declarations"
* tag 'audit-pr-20221003' of git://git.kernel.org/pub/scm/linux/kernel/git/pcmoore/audit:
audit: remove selinux_audit_rule_update() declaration
audit: use time_after to compare time
audit: free audit_proctitle only on task exit
audit: explicitly check audit_context->context enum value
audit: audit_context pid unused, context enum comment fix
audit: fix repeated words in comments
|
||
Stephen Boyd
|
f9efefdba9 |
Merge branches 'clk-baikal', 'clk-broadcom', 'clk-vc5' and 'clk-versaclock' into clk-next
- Convert Baikal-T1 CCU driver to platform driver
- Split reset support out of primary Baikal-T1 CCU driver
- Add some missing clks required for RPiVid Video Decoder on RaspberryPi
- Mark PLLC critical on bcm2835
- Support for Renesas VersaClock7 clock generator family
* clk-baikal:
clk: baikal-t1: Convert to platform device driver
clk: baikal-t1: Add DDR/PCIe directly controlled resets support
dt-bindings: clk: baikal-t1: Add DDR/PCIe reset IDs
clk: baikal-t1: Move reset-controls code into a dedicated module
clk: baikal-t1: Add SATA internal ref clock buffer
clk: baikal-t1: Add shared xGMAC ref/ptp clocks internal parent
clk: baikal-t1: Fix invalid xGMAC PTP clock divider
clk: vc5: Fix 5P49V6901 outputs disabling when enabling FOD
* clk-broadcom:
clk: bcm: rpi: Add support for VEC clock
clk: bcm: rpi: Handle pixel clock in firmware
clk: bcm: rpi: Add support HEVC clock
clk: bcm2835: fix bcm2835_clock_rate_from_divisor declaration
clk: bcm2835: Round UART input clock up
clk: bcm2835: Make peripheral PLLC critical
* clk-vc5:
clk: vc5: Add support for IDT/Renesas VersaClock 5P49V6975
dt-bindings: clock: vc5: Add 5P49V6975
clk: vc5: Use regmap_{set,clear}_bits() where appropriate
clk: vc5: Check IO access results
* clk-versaclock:
clk: Renesas versaclock7 ccf device driver
dt-bindings: Renesas versaclock7 device tree bindings
|
||
|
Stephen Boyd
|
b7f257ceb3 |
Merge branches 'clk-fixed-rate', 'clk-spreadtrum', 'clk-pxa' and 'clk-ti' into clk-next
- More devm helpers for fixed rate registration - Add Spreadtrum UMS512 SoC clk support - Various PXA168 clk driver fixes * clk-fixed-rate: clk: fixed-rate: add devm_clk_hw_register_fixed_rate clk: asm9260: use parent index to link the reference clock * clk-spreadtrum: clk: sprd: Add clocks support for UMS512 * clk-pxa: clk: pxa: add a check for the return value of kzalloc() clk: mmp: pxa168: control shared SDH bits with separate clock dt-bindings: marvell,pxa168: add clock ids for SDH AXI clocks clk: mmp: pxa168: add clocks for SDH2 and SDH3 dt-bindings: marvell,pxa168: add clock id for SDH3 clk: mmp: pxa168: fix GPIO clock enable bits clk: mmp: pxa168: add muxes for more peripherals clk: mmp: pxa168: fix incorrect parent clocks clk: mmp: pxa168: fix const-correctness clk: mmp: pxa168: add new clocks for peripherals dt-bindings: marvell,pxa168: add clock ids for additional dividers clk: mmp: pxa168: fix incorrect dividers clk: mmp: pxa168: add additional register defines * clk-ti: clk: davinci: cfgchip: Use dev_err_probe() helper clk: davinci: pll: fix spelling typo in comment MAINTAINERS: add header file to TI DAVINCI SERIES CLOCK DRIVER |
||
|
Stephen Boyd
|
26bebbfed5 |
Merge branches 'clk-rockchip', 'clk-renesas', 'clk-microchip', 'clk-allwinner' and 'clk-imx' into clk-next
* clk-rockchip: dt-bindings: clock: rockchip: change SPDX-License-Identifier dt-bindings: clock: convert rockchip,rk3128-cru.txt to YAML clk: rockchip: Add clock controller support for RV1126 SoC dt-bindings: clock: rockchip: Document RV1126 CRU clk: rockchip: Add dt-binding header for RV1126 clk: rockchip: Add MUXTBL variant * clk-renesas: clk: renesas: r8a779g0: Add EtherAVB clocks clk: renesas: r8a779g0: Add PFC/GPIO clocks clk: renesas: r8a779g0: Add I2C clocks clk: renesas: r8a779g0: Add watchdog clock dt-bindings: clock: renesas,rzg2l: Document RZ/Five SoC clk: renesas: r8a779f0: Add MSIOF clocks clk: renesas: r9a09g011: Add IIC clock and reset entries clk: renesas: r9a07g044: Add conditional compilation for r9a07g044_cpg_info clk: renesas: r8a779f0: Add TMU and parent SASYNC clocks clk: renesas: r8a779f0: Add CMT clocks clk: renesas: r8a779f0: Add SDH0 clock * clk-microchip: clk: at91: sama5d2: Add Generic Clocks for UART/USART clk: microchip: add PolarFire SoC fabric clock support dt-bindings: clk: add PolarFire SoC fabric clock ids dt-bindings: clk: document PolarFire SoC fabric clocks dt-bindings: clk: rename mpfs-clkcfg binding clk: microchip: mpfs: update module authorship & licencing clk: microchip: mpfs: convert periph_clk to clk_gate clk: microchip: mpfs: convert cfg_clk to clk_divider clk: microchip: mpfs: delete 2 line mpfs_clk_register_foo() clk: microchip: mpfs: simplify control reg access clk: microchip: mpfs: move id & offset out of clock structs clk: microchip: mpfs: add MSS pll's set & round rate MAINTAINERS: add polarfire soc reset controller reset: add polarfire soc reset support clk: microchip: mpfs: add reset controller dt-bindings: clk: microchip: mpfs: add reset controller support clk: microchip: mpfs: make the rtc's ahb clock critical clk: microchip: mpfs: fix clk_cfg array bounds violation * clk-allwinner: clk: sunxi-ng: ccu-sun9i-a80-usb: Use dev_err_probe() helper clk: sunxi-ng: ccu-sun9i-a80-de: Use dev_err_probe() helper clk: sunxi-ng: sun8i-de2: Use dev_err_probe() helper clk: sunxi-ng: d1: Limit PLL rates to stable ranges * clk-imx: clk: imx: scu: fix memleak on platform_device_add() fails clk: imx93: add SAI IPG clk clk: imx93: add MU1/2 clock clk: imx93: switch to use new clk gate API clk: imx: add i.MX93 clk gate clk: imx: clk-composite-93: check white_list clk: imx: clk-composite-93: check slice busy dt-bindings: clock: imx93-clock: add more MU/SAI clocks dt-bindings: clock: imx8mm: don't use multiple blank lines clk: imx8mp: tune the order of enet_qos_root_clk |
||
|
Stephen Boyd
|
a64b79c01c |
Merge branches 'clk-samsung', 'clk-mtk', 'clk-rm', 'clk-ast' and 'clk-qcom' into clk-next
- Add resets for MediaTek MT8195 PCIe and USB - Remove DaVinci DM644x and DM646x clk driver support * clk-samsung: clk: samsung: MAINTAINERS: add Krzysztof Kozlowski clk: samsung: exynos850: Implement CMU_MFCMSCL domain clk: samsung: exynos850: Implement CMU_IS domain clk: samsung: exynos850: Implement CMU_AUD domain clk: samsung: exynos850: Style fixes clk: samsung: exynosautov9: add fsys1 clock support clk: samsung: exynosautov9: add fsys0 clock support clk: samsung: exynosautov9: correct register offsets of peric0/c1 clk: samsung: exynosautov9: add missing gate clks for peric0/c1 dt-bindings: clock: exynos850: Add Exynos850 CMU_MFCMSCL dt-bindings: clock: exynos850: Add Exynos850 CMU_IS dt-bindings: clock: exynos850: Add Exynos850 CMU_AUD dt-bindings: clock: exynosautov9: add schema for cmu_fsys0/1 dt-bindings: clock: exynosautov9: add fsys1 clock definitions dt-bindings: clock: exynosautov9: add fys0 clock definitions clk: samsung: exynos7885: Add TREX clocks clk: samsung: exynos7885: Implement CMU_FSYS domain dt-bindings: clock: exynosautov9: correct clock numbering of peric0/c1 clk: samsung: exynos-clkout: Use of_device_get_match_data() * clk-mtk: (42 commits) clk: mediatek: add driver for MT8365 SoC clk: mediatek: Export required common code symbols clk: mediatek: Provide mtk_devm_alloc_clk_data dt-bindings: clock: mediatek: add bindings for MT8365 SoC clk: mediatek: mt8192: deduplicate parent clock lists clk: mediatek: Migrate remaining clk_unregister_*() to clk_hw_unregister_*() clk: mediatek: fix unregister function in mtk_clk_register_dividers cleanup clk: mediatek: clk-mt8192: Add clock mux notifier for mfg_pll_sel clk: mediatek: clk-mt8192-mfg: Propagate rate changes to parent clk: mediatek: clk-mt8195-topckgen: Drop univplls from mfg mux parents clk: mediatek: clk-mt8195-topckgen: Add GPU clock mux notifier clk: mediatek: clk-mt8195-topckgen: Register mfg_ck_fast_ref as generic mux clk: mediatek: clk-mt8195-mfg: Reparent mfg_bg3d and propagate rate changes clk: mediatek: mt8183: Add clk mux notifier for MFG mux clk: mediatek: mux: add clk notifier functions clk: mediatek: mt8183: mfgcfg: Propagate rate changes to parent clk: mediatek: Use mtk_clk_register_gates_with_dev in simple probe clk: mediatek: gate: Export mtk_clk_register_gates_with_dev clk: mediatek: add VDOSYS1 clock dt-bindings: clk: mediatek: Add MT8195 DPI clocks ... * clk-rm: clk: davinci: remove PLL and PSC clocks for DaVinci DM644x and DM646x * clk-ast: clk: ast2600: BCLK comes from EPLL * clk-qcom: (97 commits) clk: qcom: gcc-sm6375: Ensure unsigned long type clk: qcom: gcc-sm6375: Remove unused variables clk: qcom: kpss-xcc: convert to parent data API clk: introduce (devm_)hw_register_mux_parent_data_table API clk: qcom: gcc-msm8939: use ARRAY_SIZE instead of specifying num_parents clk: qcom: gcc-msm8939: use parent_hws where possible dt-bindings: clock: move qcom,gcc-msm8939 to qcom,gcc-msm8916.yaml clk: qcom: gcc-sm6350: Update the .pwrsts for usb gdscs clk: qcom: gcc-sc8280xp: use retention for USB power domains clk: qcom: gdsc: add missing error handling dt-bindings: clocks: qcom,gcc-sc8280xp: Fix typos clk: qcom: Add global clock controller driver for SM6375 dt-bindings: clock: add SM6375 QCOM global clock bindings clk: qcom: alpha: Add support for programming the PLL_FSM_LEGACY_MODE bit clk: qcom: gcc-sc7280: Update the .pwrsts for usb gdscs clk: qcom: gcc-sc7180: Update the .pwrsts for usb gdsc clk: qcom: gdsc: Fix the handling of PWRSTS_RET support clk: qcom: Add SC8280XP GPU clock controller dt-bindings: clock: Add Qualcomm SC8280XP GPU binding clk: qcom: smd: Add SM6375 clocks ... |
||
|
Stephen Boyd
|
49f4c2d101 |
Merge branches 'clk-ofnode', 'clk-bindings', 'clk-cleanup', 'clk-zynq' and 'clk-xilinx' into clk-next
- Miscellaneous of_node_put() fixes - Nuke dt-bindings/clk path (again) by moving headers to dt-bindings/clock - Convert gpio-clk-gate binding to YAML - Various fixes to AMD/Xilinx Zynqmp clk driver - Graduate AMD/Xilinx "clocking wizard" driver from staging * clk-ofnode: clk: ti: Balance of_node_get() calls for of_find_node_by_name() clk: tegra20: Fix refcount leak in tegra20_clock_init clk: tegra: Fix refcount leak in tegra114_clock_init clk: tegra: Fix refcount leak in tegra210_clock_init clk: sprd: Hold reference returned by of_get_parent() clk: berlin: Add of_node_put() for of_get_parent() clk: at91: dt-compat: Hold reference returned by of_get_parent() clk: qoriq: Hold reference returned by of_get_parent() clk: oxnas: Hold reference returned by of_get_parent() clk: st: Hold reference returned by of_get_parent() clk: tegra: Add missing of_node_put() clk: meson: Hold reference returned by of_get_parent() clk: nomadik: Add missing of_node_put() * clk-bindings: dt-bindings: clock: drop minItems equal to maxItems dt-bindings: clock: gpio-gate-clock: Convert to json-schema dt-bindings: clock: Move versaclock.h to dt-bindings/clock dt-bindings: clock: Move lochnagar.h to dt-bindings/clock * clk-cleanup: clk: allow building lan966x as a module clk: clk-xgene: simplify if-if to if-else clk: nxp: fix typo in comment clk: mvebu: armada-37xx-tbg: Remove the unneeded result variable clk: ti: dra7-atl: Fix reference leak in of_dra7_atl_clk_probe clkdev: Simplify devm_clk_hw_register_clkdev() function clkdev: Remove never used devm_clk_release_clkdev() clk: Remove never used devm_of_clk_del_provider() clk: pistachio: Fix initconst confusion clk: clk-npcm7xx: Remove unused struct npcm7xx_clk_gate_data and npcm7xx_clk_div_fixed_data clk: do not initialize ret clk: remove extra empty line clk: Fix comment typo clk: move from strlcpy with unused retval to strscpy * clk-zynq: clk: zynqmp: pll: rectify rate rounding in zynqmp_pll_round_rate clk: zynqmp: Check the return type zynqmp_pm_query_data clk: zynqmp: Add a check for NULL pointer clk: zynqmp: Replaced strncpy() with strscpy() clk: zynqmp: Fix stack-out-of-bounds in strncpy` clk: zynqmp: make bestdiv unsigned * clk-xilinx: clk: clocking-wizard: Depend on HAS_IOMEM clk: clocking-wizard: Use dev_err_probe() helper clk: clocking-wizard: Update the compatible clk: clocking-wizard: Fix the reconfig for 5.2 clk: clocking-wizard: Rename nr-outputs to xlnx,nr-outputs clk: clocking-wizard: Move clocking-wizard out dt-bindings: add documentation of xilinx clocking wizard |
||
|
Stephen Boyd
|
39bc9b589e |
clk: qcom: gcc-sm6375: Ensure unsigned long type
This PLL frequency needs a UL postfix to avoid compiler warnings on
32-bit architectures.
Fixes:
|
||
|
Linus Torvalds
|
3eba620e7b |
- The usual round of smaller fixes and cleanups all over the tree
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8QskACgkQEsHwGGHe VUq2ZQ/+KwgmCojK54P05UOClpvf96CLDJA7r4m6ydKiM7GDWFg9wCZdews4JRk1 /5hqfkFZsEAUlloRjRk3Qvd6PWRzDX8X/jjtHn3JyzRHT6ra31tyiZmD2LEb4eb6 D0jIHfZQRYjZP39p3rYSuSMFrdWWE8gCETJLZEflR96ACwHXlm1fH/wSRI2RUG4c sH7nT/hGqtKiDsmOcb314yjmjraYEW1mKnLKRLfjUwksBET4mOiLTjH175MQ5Yv7 cXZs0LsYvdfCqWSH5uefv32TX/yLsIi8ygaALpXawkoyXTmLr5MwJJykrm60AogV 74gvxc3s3ItO0aKVM0J4ABTUWmU+wg+sjPcJD1MolafnJpsgGdfEKlWfTY4hjMV5 onjtgr7byEdgZU25JtuI0BzPoggahnHvK6LiIvGy9vw8LRdKziKPXsyxuRF4rvXw 0n9ofVRmBCuzUsRS8vbL65K2PcIS4oUmUUSEDmALtGQ9vG8j50k6vM3Fu6HayyJx 7qgjVRpREemqRO21wS7SmR6z1RkT5J+zWv4TdacyyrA9QRqyM6ny/yZGCsfOZA77 +LxBFzITwIXlTgfTDVYnLIi1ZPP2MCK74Gq0Buqsjxz8IOpV6yjB+PSajbJzZv35 gIdbWKc5oHgmcDkrpBCoZ6KQ5ZNvDy6glSdnegkDFjRfVm5eCu0= =RqjF -----END PGP SIGNATURE----- Merge tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cleanups from Borislav Petkov: - The usual round of smaller fixes and cleanups all over the tree * tag 'x86_cleanups_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Include the header of init_ia32_feat_ctl()'s prototype x86/uaccess: Improve __try_cmpxchg64_user_asm() for x86_32 x86: Fix various duplicate-word comment typos x86/boot: Remove superfluous type casting from arch/x86/boot/bitops.h |
||
Konrad Dybcio
|
a76d550f76 |
clk: qcom: gcc-sm6375: Remove unused variables
gcc_parent_data_15 and gcc_parent_map_15 are not used in this driver.
Remove them.
Signed-off-by: Konrad Dybcio <konrad.dybcio@somainline.org>
Link: https://lore.kernel.org/r/20221003211438.25691-1-konrad.dybcio@somainline.org
Fixes:
|
||
|
Linus Torvalds
|
193e2268a3 |
- More work by James Morse to disentangle the resctrl filesystem generic
code from the architectural one with the endgoal of plugging ARM's MPAM implementation into it too so that the user interface remains the same - Properly restore the MSR_MISC_FEATURE_CONTROL value instead of blindly overwriting it to 0 -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8QhAACgkQEsHwGGHe VUqazA/8DIfBYMXe/M6qk+tZnLyBJPL3/3hzqOPc3fu2pmwzCHhb+1ksk7s0uLEO xdV4CK3SDc8WQnsiF9l4Hta1PhvD2Uhf6duCVv1DT0dmBQ6m9tks8SwhbgSCNrIh cQ8ABuTUsE0/PNW6Zx7x1JC0e2J6Yjhn55WGMGJD7kGl0eo1ClYSv8vnReBE/6cX YhgjVnWAeUNgwKayokbN7PFXwuP0WjDGmrn+7e8AF4emHWvdDYYw9F1MHIOvZoVO lLJi6f7ddjxCQSWPg3mG0KSvc4EXixhtEzq8Mk/16drkKlPdn89sHkqEyR7vP/jQ lEahxtzoWEfZXwVDPGCIIbfjab/lvvr4lTumKzxUgHEha+ORtWZGaukr4kPg6BRf IBrE12jCBKmYzzgE0e9EWGr0KCn6qXrnq37yzccQXVM0WxsBOUZWQXhInl6mSdz9 uus1rKR/swJBT58ybzvw2LGFYUow0bb0qY6XvQxmriiyA60EVmf9/Nt/KgatXa63 s9Q4mVii4W1tgxSmCjNVZnDFhXvvowclNU4TuJ6d+6kvEnrvoW5+vDRk2O7iJKqf K2zSe56lf0TnBe9WaUlxRFaTZg+UXZt7a+e7/hQ90wT/7fkIMk1uxVpqnQW4vDPi YskbKRPc5DlLBSJ+yxW9Ntff4QVIdUhhj0bcKBAo8nmd5Kj1hy4= =1iEb -----END PGP SIGNATURE----- Merge tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cache resource control updates from Borislav Petkov: - More work by James Morse to disentangle the resctrl filesystem generic code from the architectural one with the endgoal of plugging ARM's MPAM implementation into it too so that the user interface remains the same - Properly restore the MSR_MISC_FEATURE_CONTROL value instead of blindly overwriting it to 0 * tag 'x86_cache_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (22 commits) x86/resctrl: Make resctrl_arch_rmid_read() return values in bytes x86/resctrl: Add resctrl_rmid_realloc_limit to abstract x86's boot_cpu_data x86/resctrl: Rename and change the units of resctrl_cqm_threshold x86/resctrl: Move get_corrected_mbm_count() into resctrl_arch_rmid_read() x86/resctrl: Move mbm_overflow_count() into resctrl_arch_rmid_read() x86/resctrl: Pass the required parameters into resctrl_arch_rmid_read() x86/resctrl: Abstract __rmid_read() x86/resctrl: Allow per-rmid arch private storage to be reset x86/resctrl: Add per-rmid arch private storage for overflow and chunks x86/resctrl: Calculate bandwidth from the previous __mon_event_count() chunks x86/resctrl: Allow update_mba_bw() to update controls directly x86/resctrl: Remove architecture copy of mbps_val x86/resctrl: Switch over to the resctrl mbps_val list x86/resctrl: Create mba_sc configuration in the rdt_domain x86/resctrl: Abstract and use supports_mba_mbps() x86/resctrl: Remove set_mba_sc()s control array re-initialisation x86/resctrl: Add domain offline callback for resctrl work x86/resctrl: Group struct rdt_hw_domain cleanup x86/resctrl: Add domain online callback for resctrl work x86/resctrl: Merge mon_capable and mon_enabled ... |
||
|
Linus Torvalds
|
b5f0b11353 |
- Get rid of a single ksize() usage
- By popular demand, print the previous microcode revision an update was done over - Remove more code related to the now gone MICROCODE_OLD_INTERFACE - Document the problems stemming from microcode late loading -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8QL8ACgkQEsHwGGHe VUoDxw/9FA3rOAZD7N0PI/vspMUxEDQVYV60tfuuynao72HZv+tfJbRTXe42p3ZO B+kRPFud4lAOE1ykDHJ2A2OZzvthGfYlUnMyvk1IvK/gOwkkiSH4c6sVSrOYWtl7 uoIN/3J83BMZoWNOKqrg1OOzotzkTyeucPXdWF+sRkfVzBIgbDqtplbFFCP4abPK WxatY2hkTfBCiN92OSOLaMGg0POpmycy+6roR2Qr5rWrC7nfREVNbKdOyEykZsfV U2gPm0A953sZ3Ye6waFib+qjJdyR7zBQRCJVEGOB6g8BlNwqGv/TY7NIUWSVFT9Y qcAnD3hI0g0UTYdToBUvYEpfD8zC9Wg3tZEpZSBRKh3AR2+Xt44VKQFO4L9uIt6g hWFMBLsFiYnBmKW3arNLQcdamE34GRhwUfXm0OjHTvTWb3aFO1I9+NBCaHp19KVy HD13wGSyj5V9SAVD0ztRFut4ZESejDyYBw9joB2IsjkY2IJmAAsRFgV0KXqUvQLX TX13hnhm894UfQ+4KCXnA0UeEDoXhwAbYFxR89yGeOxoGe1oaPXr9C1/r88YLq0n ekjIVZ3G97PIxmayj3cv9YrRIrrJi4PWF1Raey6go3Ma+rNBRnya5UF6Noch1lHh HeF7t84BZ5Ub6GweWYaMHQZCA+wMCZMYYuCMNzN7b54yRtQuvCc= =lWDD -----END PGP SIGNATURE----- Merge tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x75 microcode loader updates from Borislav Petkov: - Get rid of a single ksize() usage - By popular demand, print the previous microcode revision an update was done over - Remove more code related to the now gone MICROCODE_OLD_INTERFACE - Document the problems stemming from microcode late loading * tag 'x86_microcode_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/microcode/AMD: Track patch allocation size explicitly x86/microcode: Print previous version of microcode after reload x86/microcode: Remove ->request_microcode_user() x86/microcode: Document the whole late loading problem |
||
|
Linus Torvalds
|
9bf445b65d |
- Ensure paravirt patching site descriptors are aligned properly so that
code can do proper arithmetic with their addresses -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8P3AACgkQEsHwGGHe VUo+ShAAlfs3NlgbioWgHShcZejOT8itvbMz9KDibVd/vH9bk0wREb9nSWkjiXvU a1OlAyskqwwOnYeWkPxSsXGNzS8TyhtBnTU8PBwmNhADktjQZXcTjptKA5MLPlO0 vXKYdGacj2F+Pnllo2BTAQO3HPSYC1D49CqZKpgt4eD9KJyx+wizbmT8wUHeKSIz q/J+3JfU5TdSg0bgRcv9iBLJZ52DEBGpSC8o5NSPfFygDjYkkKQBSykYPF2rhQx9 L2qirxbOZngL0A91qnI4QqmdUK7PQPNMW7FHtMJYEeYccGsxUatl0AwCNBAc7vuE cNAUGQfOblZfrrAByUwuuY/o0cNfeAQFsh8p4xOjf9M/aVUBjKOKFEXzY7TzjQi5 TDRWBDCkjRC3Bqh7uXzbG8R4a0WOUsELcmYHAntxV8v/IJHwjNsVk/YNr0U3minB 85cucsZUcOB6ApicGtHo02tjca0Jc4k1CijdGZki3YNEmH4fyHydrI4HAB6QArwE g/mJ26+diZezM0MNYLuS5yXFWjhaUzlH6Qu8CI+2/q/jSN3OOQLfkCDWBiYqh2CV ye0HLrlkOav7FNDkW7g4v6G0MLTYBNQpoLxQzt4e8/oubTjOYxb5/xHS1kHVtBKb QegcBHkN2JcHfe3WK4vEunKT9DAyeSgGHdFKialANOXDI72INNs= =ibJy -----END PGP SIGNATURE----- Merge tag 'x86_paravirt_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 paravirt fix from Borislav Petkov: - Ensure paravirt patching site descriptors are aligned properly so that code can do proper arithmetic with their addresses * tag 'x86_paravirt_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/paravirt: Ensure proper alignment |
||
|
Linus Torvalds
|
901735e51e |
- Drop misleading "RIP" from the opcodes dumping message
- Correct APM entry's Konfig help text -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8PoMACgkQEsHwGGHe VUpptBAAm31ZnZT1u4OMCWIfS8dUJYKQA0pg4Xb4Hj0epFFjqGvV15+JFLQrvNv8 kWbCZS7wryNsch0dnNyxico6mBD6BGqUSTsiflcpk5rWzy0JOpIfeCs5dsNYhIkV Pqk0qXK25kfzYW/7I2HE/aNeE7jxAOTcKzLtW6J74UYj3jLWSmtlPP/o5qxMUeN+ vYlLg45jhjcTH5cBD1U2MmbJP3M8WRcRgHpI7ZGrvOXUgGbTqdu0m+dsCZIkIzps ePDgX3mgAU6wjckjH333hbas256SAWWEtBYID/71ZIgK8EjabIu6FcwWAxyfexjp OU/k2iBNOXHbzhO4lEzqar/lcNHyfI4edxw4gsmIQddmmNI2b62s0Nis7Or8DDU6 v5ZPrW6tcvVT7cZqP3naidRTNW2Cwo/+/Z09VQnhPQaZ7U8U5uCS4wgHiJuV3e0s nH02QU+t/9zrn46UurVXCSSHwWNaGNA4Gb3a4ZdwRUKdxMrf5frmU+dfiFhdMMoo I3lxQvMFtFb2rLNRA6zWDhsJFVU3F5cMu7zlGKHTNlD/TcO/qcKqiTkrAyM5trLG NqbPdwBVzdwLR6MgYOUDI+nB5Ad1Uq2Cx+SfRLT+C8L6dZFB+zvNiBH/8Q+25ohC c4ldgXSiZulfLApG3JY5chVvFWGa2H+EpoFexyQi+F9AAIRD14Q= =cNp0 -----END PGP SIGNATURE----- Merge tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull misc x86 fixes from Borislav Petkov: - Drop misleading "RIP" from the opcodes dumping message - Correct APM entry's Konfig help text * tag 'x86_misc_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/dumpstack: Don't mention RIP in "Code: " x86/Kconfig: Specify idle=poll instead of no-hlt |
||
|
Linus Torvalds
|
bb1f11546e |
- "Slap" the __builtin_ffs/ctzl() compiler builtins in front of the
kernel's optimized ffs()/ffz() helpers in order to make use of the compiler's constant folding optmization passes. -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8PWQACgkQEsHwGGHe VUqyoRAAhS/b9Jie/Tvx4gVHkydCe+6403MVjRumSqh4634QaiJP1nILOgH+P3qj BSuR0el8rAVxGm6vF6IoU5+rM17MQ4d3M2xtz+ZxdIOwIFDVoHoJS9EQSiArOspD eOUOLlPb/Q5/n0pPMCxBzR3NYfhaWQ9YzujtVeFvR2KxesQAKpN9DpQxX1rybyee YJhsRlC7+8TEW7CgFo4+qzC291eUE1kdteGkjM4GH2ts3R3sllP5wjPJpHj/oCR4 LBVi8Ie+5yHHpKfnkYNR4DephsYlpmjcKngYT6Jf+dBEhzXpgvJNzpUG42ZjJb94 g8RG67tvYslU9psutpx/AilohLxaYSyY5AnXcaHGjvX27dadAX1vPKlP+Xqpc+IM /LHpKdcsWDuH0v68kw2wbLtUgD+Is7OQbE5oOaGCQ3VbMkhtFoqbFayu3KHu3uyt 4Jkb0xPjHi//eOp69334PuP/ksbO7vs/AEZi6PvNp71szBw8u80+9LzhgWnqN4hU sb2+PYP27bIxflcavPqPg8WqwZrRSrE/gb6AG0J3M4zFAZ3tBx/Gpd8Auk4V0VhZ aLTOa0S6C0Q5IO6NlkA5OGedphMud+Pki21gyJQIweVsScrjEd1l/YDJMFcoCSqW mNAkEPq+7Xerlmfv/BhlyOjPH/DBrb3pthNoJDTui4eiyrw8WEU= =Reul -----END PGP SIGNATURE----- Merge tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 asm update from Borislav Petkov: - Use the __builtin_ffs/ctzl() compiler builtins for the constant argument case in the kernel's optimized ffs()/ffz() helpers in order to make use of the compiler's constant folding optmization passes. * tag 'x86_asm_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/asm/bitops: Use __builtin_ctzl() to evaluate constant expressions x86/asm/bitops: Use __builtin_ffs() to evaluate constant expressions |
||
|
Linus Torvalds
|
8cded8fb12 |
- Make sure an INT3 is slapped after every unconditional retpoline JMP
as both vendors suggest - Clean up pciserial a bit -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM8AxoACgkQEsHwGGHe VUrdqQ//c07XggioZRVWASkE5vXggSuM1BzCkf55kzx3Hp20F8ui26cgOW8nmNr9 8pKjcTSGZvZPyZFHPBmZDFqver+viSAA3y+/DopNMd6DIeQWOCtJMFdoGPuPqCMq qYb3WkGu3i4AcjHxeiYKIlf76w+DfSomk+NspUYKLxGuPH6Hg5MFLwv32c0orh/g sMM5YCFP4xKtMTrpZ8GXO8+81dU57KwCPnmLy6RrPPCjIHkEmS9KBaib2T9udFvf DMQVZGEU4DQkl+SXoj5fOn03eQ56kDaH3OyV7JbHUwIXpASAEJZENwBD/HmP02aB uN+tm9brjyJLPD92FldoJPkcsYBcwS1vx+TBH7/KLsaGZziZ1+Oc8hk6fbAd6yp9 W/ex491SCmdBA0wQelw/fZJ24/QXOT1PGIKl96srH0VPvhQtCESMDbKMdTY4p6Ow s6GYF+HW6SV5d/jUQQzfmd1D7Ur6RxwvUnRvfDg8/AZ+INQRciMG0aFJa3E1SUJf TkfXZ12XsL2LABK4MWOJqJsB+DSnEZbjOaPxWIKBhMUHxoc8nIny5ZFZbww5iVii pUdKEMgicm1zuaiIoQBY9K6oOlR2ixZJDw++NzfId2jwsiR4MeJH78sB61mItMfs WnwIkNxNfimgvcGtAogTMalJlnN56ukrjjwGrdhJGL3WovQ8qHc= =Ggh3 -----END PGP SIGNATURE----- Merge tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 core fixes from Borislav Petkov: - Make sure an INT3 is slapped after every unconditional retpoline JMP as both vendors suggest - Clean up pciserial a bit * tag 'x86_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86,retpoline: Be sure to emit INT3 after JMP *%\reg x86/earlyprintk: Clean up pciserial |
||
|
Linus Torvalds
|
5bb3a16dbe |
- Add support for locking the APIC in X2APIC mode to prevent SGX enclave leaks
-----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM7/C0ACgkQEsHwGGHe VUp3jA//caeFnxfKU8F6B+D+sqXub+fRC88U/5j5TVgueiFdpgbHxbeb5isV2DW8 /1as5LN6PCy0V9ax873PblaRdL+ir2KVjzTOQhv1fsBWtRJgRAte6ltHfncST3jM Qm9ELCSYlwX6wgPDFWrLd5/jCHLq/7ffvWATwt4ZS9/+ebwJJ3JRU82aydvSAe+M tYDLA0RYjrTKB7bfhlxft8n3/ttOwmaQ9sPw6J9KWL9VZ8d7uA0cZgHMFgclr9xb +cTuOQwJ+a+njS3tXYWH0lU4lLw6tRcWrl3/gHpiuiwU85xdoClyCcsmvZYMLy1s cv4CmAQqs0dSlcII/F+6pTh+E8gcpzm2+uiP8k56dCK3c9OhtdKcPRcxm169JID+ hKZ9rcscx1e/Q3rzhRtC4w2LguDcARe2b0OSMsGH40uZ/UOHdnYVk8oD81O9LWrB T4DgjJCcSf4y0KGDXtjJ39POfe0zFHgx8nr5JOL9Las6gZtXZHRmCzBacIU6JeJo 5VEl6Yx1ca7aiuNTTcsmmW3zbsR9J6VppFZ6ma9jTTM8HbINM6g4UDepkeubNUdv tAJVbb6MEDGtT1ybH4oalrYkPfhYDwRkahqPtMY0ROtlzxO65q2DI3rH2gtyboas oP4hfEDtzKiJj4FiIRMKbryKz7MBWImHMRovRGKjB/Y48mTxX3M= =e8H8 -----END PGP SIGNATURE----- Merge tag 'x86_apic_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 APIC update from Borislav Petkov: - Add support for locking the APIC in X2APIC mode to prevent SGX enclave leaks * tag 'x86_apic_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/apic: Don't disable x2APIC if locked |
||
|
Linus Torvalds
|
51eaa866a5 |
- Fix the APEI MCE callback handler to consult the hardware about the
granularity of the memory error instead of hard-coding it - Offline memory pages on Intel machines after 2 errors reported per page -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM7+ZAACgkQEsHwGGHe VUp3Rg/9HkwMcl8HOEShQoN1HvhDh68DeR0pgZpFjooBgilqFuPopWn7rwOsebza b6Z1XYg3pmWwkG35ztHedFP8WkRb8aZDJV7czpGxiaxtRUCuXpGZJk45CFzU+3l8 FD9XKryDf6rPSKmg6w/63FUPVXJXpM8+pAlEso9BVrb6xmUb3n6ul5A/kt3Z4OBZ beNDI54s7pfKXmCYze7VbK2nqyEM9fmDuPAhaicB/qhVEqxSWMNKDYDhHs1wt/Um dOlLC2paqcc9EaRhV/L/9Pvi1zasy7Q0+jSIXhgbag7EQmZRYQn3Pe0xqUJNhK2H ulm65Dy+AZ3y15+qBkBOgoNF/By5eMwJ+C9bucC6FWkPG0XMjDVGiphf+DPZmAHk msYSvyp++WidNYn/bXhbQv0epjheLoHj22lTvlHwLquI+eISuDV24DIcBQQpFFed S/8sMw3RqoOgAd3LHr1NGcd/7eF+b/Lc1mtUx7qhg/W0V2cYVTGIcNJMAJ8USHMy IxFiB+8x7ps0lRJGlaApylLQOGAhS9WxpH2UUIKIoURrmCi9Pf8OaHzfIA5jYK+t xEQTzZE5ZUB0V5mvNhAWTm9HvlaW1WNbokt0vElAEJ9WAjRfMVYKya7shlAK2MYI nrM3eqlUwOqTGLGCA7IhCS9Re7M5ZKZk5nsLygnYsadntqCmN0c= =5tV9 -----END PGP SIGNATURE----- Merge tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RAS updates from Borislav Petkov: - Fix the APEI MCE callback handler to consult the hardware about the granularity of the memory error instead of hard-coding it - Offline memory pages on Intel machines after 2 errors reported per page * tag 'ras_core_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mce: Retrieve poison range from hardware RAS/CEC: Reduce offline page threshold for Intel systems |
||
|
Linus Torvalds
|
7db99f01d1 |
- Print the CPU number at segfault time. The number printed is not
always accurate (preemption is enabled at that time) but the print string contains "likely" and after a lot of back'n'forth on this, this was the consensus that was reached. See thread starting at: https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com - After a *lot* of testing and polishing, finally the clear_user() improvements to inline REP; STOSB by default -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM780YACgkQEsHwGGHe VUoVmRAAhTTUYqe81XRAX1Egge1RVwXgZFZQQD54239IveLt80kpg1AFR697z3/G GSaL5dy9/LEwyE0r9u7VN1SuY3Bz8LEZLYfurKlGfMGv3mlcUedLSWHQNaNZ4+cx nwP1VjrfH80Qwn7l99hOZ7kwCRlUWdsamcMsv6n7Fq0YnM7vW6MgmQGlqCGADQKI GGElgn3VaU5pEXF4YtZE0qfy17dgkW+RJD7RlaAtzmKcdKYiKgfX0Mh9bkQ5VVcb 973peg9GHKHoP0w54LYKNgF/WkYPpBwcNIkJW//aMLGS5ofalliu0W281okAhZ7w Sknnx+umoprCAV9ljn/HZbQnseXPXKlZWUxiwfEZD2fcBI6+60HK86zVSEvrYxNs COZRhpj/bwvOt5LtNj7dcV6cbbBvJJIEJSNazXHscds2zUh79fidzkjZ/Z0Hbo7D sr7SM80STaURGFPTLoD41z4TY3V2GH8JUbWG9+I4fBjmSDyX+tQKKJhH886MRSSW ZQ0pY1uhwF8QBMlp3t87pZ2gbdjMr40PSYJGU+Xqsb/khq7xOWnP1CiIkVUHLF2L n/hm6VF6ifwFstFhOBc8nTcz7kGqzKvlQssFpf+DAIl/b7mZ3AKHVIJxTpZ1hcis BqQdeNcVEcNCRZWFzrG5hCs0b7xtaJrI30RPSMsQP2IcaX+DNyg= =xLSS -----END PGP SIGNATURE----- Merge tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 cpu updates from Borislav Petkov: - Print the CPU number at segfault time. The number printed is not always accurate (preemption is enabled at that time) but the print string contains "likely" and after a lot of back'n'forth on this, this was the consensus that was reached. See thread at [1]. - After a *lot* of testing and polishing, finally the clear_user() improvements to inline REP; STOSB by default Link: https://lore.kernel.org/r/5d62c1d0-7425-d5bb-ecb5-1dc3b4d7d245@intel.com [1] * tag 'x86_cpu_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Print likely CPU at segfault time x86/clear_user: Make it faster |
||
|
Linus Torvalds
|
ba94a7a900 |
- Improve the documentation of a couple of SGX functions handling
backing storage -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM77w8ACgkQEsHwGGHe VUq8uhAAifAom4dzMQ0zsLP1nPY9Y7jqNdMvR1f4XcnWVQ5Ipvlkooy+m6wZr4Zd Yy5HT9fvlFNcZzH8V0vy/8Kf86mT7K6NUalvcBJhiZUkSiFaDrzTgEi7+Znqw402 PVe/MiaUTfK1xokYIdzMmibsVh7SrL/8U4r4YWV0mQUYaGu0Fh7I+474Hd+4zH5F 12sfq0aw/IyCj+XrvVCIkvdus416wmdgs5KSgDqvfTRAm44rrLaz6xfT0ONjAv7g Pzs4eRgxOgxDJRpumoAw+UGC23FWDfKIvZOLiczrFdBHZMmFPYkOK2wrICacHZx0 I/DpwPk4sHKFFKjdXAqHDtLPwXp1D0xRN1Nw4UO5uSuj1XzjgPvBFjZ+zjM3EZMe OjzUYC1Qt2OrCYEXAot9tb9e0jqrg2hD9nCXrVszlXMbOyKX6l8BURf+2uzsXvq0 tAdfWl3awn6OpX3MxHwxuSq70BS8+KgizAgkHbimyJnPcPgFWa9b7fwp/iYbJF2U g6vMUyK0r3pomfmXFed+QCZ7CD1tGGharLoa2/aQxshcffPrhG9CN6As769oxt1Z m4I17yi8YViEQyAyvJ5GxpCJykVByZUsbjUnE4uDHBrQRmeN5D2SMcYvYF7J2AVV up81qj/TOsWEqnP/h1B6K1rz700P/tQK/ebk4uRdacN/+9JyxPo= =lezL -----END PGP SIGNATURE----- Merge tag 'x86_sgx_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 SGX update from Borislav Petkov: - Improve the documentation of a couple of SGX functions handling backing storage * tag 'x86_sgx_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/sgx: Improve comments for sgx_encl_lookup/alloc_backing() |
||
|
Linus Torvalds
|
f8475a6749 |
- Cleanup x86/rtc.c and delete duplicated functionality in favor of
using the respective functionality from the RTC library -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM77hwACgkQEsHwGGHe VUr0MBAAto17sVeaQUcJ9bw6qNu/IWwCt35X+dPXxXDANOxzZUdN+EEyEVcxIP45 f9nL3IiMPXPBWCyLqVbxAHi5z1FUc8NC3EJdMDQuCvZ4/OXyt1jyoRZ1V7NOUHYm EJBS52GJJOZk0DCmv7baSrGZ0d5qytMPmMlg7Phs8uaHzzL4/PRKDQvWWkYw9eoA fqEVVrHXi9D18PDvFCwAA83jbDrtLk52KzLrqW57jx6+V1CdOO+GFytNNOgYvwef FFRRo/BynSEONQNSX3RiDQ7NkBhgdpOaE9RglNyeHk0VctAiawkH0yEjyz2zOsyQ PAe8KBpnzUW49PMUBYKbOTLaOa73OYhdTEbeuV2cntE1OrH35sCH7scKIjJXyAer FFhz8nDkT36wXYtzHMgioE7Q8vUO04D3IGRAA3CADmX5BeIhgLlU7KDXoDVdJfAP aJUVojCFM0CI3ASmZhQbwEH+otycrcIs6bhkq/X+qQmcnTD9Q+7GqU+WdSPfHTbg 29Q+gn4IY/WWqdIgCH5i+XV0PnROcWNtb8YsgkN5GRyGV9AIRhNut20CREdBB6vG HVsWjimVJXbA6ysG4TNxcBENALaXYNyqICkgo/r0G1lOp90CseuOKhJI4JbZx+IF VuPyKKvk3r86sP1OkmFn46i52kyxl4OTPwFFYFpHOkfEczm4/tU= =9t5p -----END PGP SIGNATURE----- Merge tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip Pull x86 RTC cleanups from Borislav Petkov: - Cleanup x86/rtc.c and delete duplicated functionality in favor of using the respective functionality from the RTC library * tag 'x86_timers_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/rtc: Rename mach_set_rtc_mmss() to mach_set_cmos_time() x86/rtc: Rewrite & simplify mach_get_cmos_time() by deleting duplicated functionality |
||
|
Linus Torvalds
|
3339914a58 |
- Get TSC and CPU frequency from CPUID leaf 0x40000010 when the kernel
is running as a guest on the ACRN hypervisor
-----BEGIN PGP SIGNATURE-----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=Ds89
-----END PGP SIGNATURE-----
Merge tag 'x86_platform_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 platform update from Borislav Petkov:
"A single x86/platform improvement when the kernel is running as an
ACRN guest:
- Get TSC and CPU frequency from CPUID leaf 0x40000010 when the
kernel is running as a guest on the ACRN hypervisor"
* tag 'x86_platform_for_v6.1_rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/acrn: Set up timekeeping
|
||
|
Linus Torvalds
|
bf7676251b |
- Add support for Skylake-S CPUs to ie31200_edac
- Improve error decoding speed of the Intel drivers by avoiding the ACPI facilities but doing decoding in the driver itself - Other misc improvements to the Intel drivers - The usual cleanups and fixlets all over EDAC land -----BEGIN PGP SIGNATURE----- iQIzBAABCgAdFiEEzv7L6UO9uDPlPSfHEsHwGGHeVUoFAmM76jAACgkQEsHwGGHe VUqSjw/+LCvRqygvaPxoEOZpnid6hXsruVGDQDeDp8PHJTapvezOzJY0KnBydAhw QzdnrFwkJjto/caRFpgJRN6cxZHP4IuNQ65UZCHj8Lw6wEkHMV4ptkYbLSihZcMn prkmASZkkTe2gcMchNidjTmYLACSHp1EoZJRWkXZbF6dy4NQHTU78fNp62WSeUoE DdMwEtzrMkqNRDJ7vVEqNLdJudOEW2Uhr5RqU8WuZcvj1pyE4ckGCiWEs6vmEtKi YxLJ7Qg+P7TVQLB+5l2kXHVgHoVj5WXiKMFi0ws2vXojN7i71LCY5zVmoWFSimcX liJ6iK3OwZCE1r0AY9DVbRuIRhW4cwGxI07Am/MNhbQsE0pdY4LryNooosEAMppk Knsbxycc/6Nzr0dnbsO9uMRautPR9jdbiQ/KZQZvcGgvCdeNQddE3mR0NSPMOzD8 CDuufe+/CudZ5ylWpLP1MW3bGrgH8HUQO85N8nDprDGypGjO08bTIUpFoZdJN2nA Qz31HDs98TcgDWQrpDjR1g/fi/drobJg6OFCQZUGEldEJnVI1Ju2uxvTkyZqH64T 52OwnqcxeNKHH6AQzN0/wLkB2vNpBSngMB0VPEbKAlDRKFZzY4vJs3XMEK2+O8QS BSRvClFRQUl06dEeb+7zukXW9z9cBXGULKW/CGtS2cDd+XVz/PE= =Gh9S -----END PGP SIGNATURE----- Merge tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras Pull EDAC updates from Borislav Petkov: - Add support for Skylake-S CPUs to ie31200_edac - Improve error decoding speed of the Intel drivers by avoiding the ACPI facilities but doing decoding in the driver itself - Other misc improvements to the Intel drivers - The usual cleanups and fixlets all over EDAC land * tag 'edac_updates_for_v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras: EDAC/i7300: Correct the i7300_exit() function name in comment x86/sb_edac: Add row column translation for Broadwell EDAC/i10nm: Print an extra register set of retry_rd_err_log EDAC/i10nm: Retrieve and print retry_rd_err_log registers for HBM EDAC/skx_common: Add ChipSelect ADXL component EDAC/ppc_4xx: Reorder symbols to get rid of a few forward declarations EDAC: Remove obsolete declarations in edac_module.h EDAC/i10nm: Add driver decoder for Ice Lake and Tremont CPUs EDAC/skx_common: Make output format similar EDAC/skx_common: Use driver decoder first EDAC/mc: Drop duplicated dimm->nr_pages debug printout EDAC/mc: Replace spaces with tabs in memtype flags definition EDAC/wq: Remove unneeded flush_workqueue() EDAC/ie31200: Add Skylake-S support |
||
Geert Uytterhoeven
|
0e0abad2a7 |
io_uring: Add missing inline to io_uring_cmd_import_fixed() dummy
If CONFIG_IO_URING is not set:
include/linux/io_uring.h:65:12: error: ‘io_uring_cmd_import_fixed’ defined but not used [-Werror=unused-function]
65 | static int io_uring_cmd_import_fixed(u64 ubuf, unsigned long len, int rw,
| ^~~~~~~~~~~~~~~~~~~~~~~~~
Fix this by adding the missing "inline" keyword.
Fixes:
|
||
Petr Mladek
|
c77ae0b863 | Merge branch 'rework/kthreads' into for-linus | ||
|
Petr Mladek
|
da743a92e5 | Merge branch 'for-6.1-hash-pointer-init' into for-linus | ||
|
Nicholas Piggin
|
0fa6831811 |
powerpc/64: Fix msr_check_and_set/clear MSR[EE] race
irq soft-masking means that when Linux irqs are disabled, the MSR[EE] value can change from 1 to 0 asynchronously: if a masked interrupt of the PACA_IRQ_MUST_HARD_MASK variety fires while irqs are disabled, the masked handler will return with MSR[EE]=0. This means a sequence like mtmsr(mfmsr() | MSR_FP) is racy if it can be called with local irqs disabled, unless a hard_irq_disable has been done. Reported-by: Sachin Sant <sachinp@linux.ibm.com> Signed-off-by: Nicholas Piggin <npiggin@gmail.com> Signed-off-by: Michael Ellerman <mpe@ellerman.id.au> Link: https://lore.kernel.org/r/20221004051157.308999-2-npiggin@gmail.com |
||
|
Nicholas Piggin
|
8154850b28 |
powerpc/64s/interrupt: Change must-hard-mask interrupt check from BUG to WARN
This new assertion added is generally harmless and gets fixed up
naturally, but it does indicate a problem with MSR manipulation
somewhere.
Fixes:
|
||
Peter Zijlstra
|
82aad7ff7a |
perf/hw_breakpoint: Annotate tsk->perf_event_mutex vs ctx->mutex
Perf fuzzer gifted a lockdep splat:
perf_event_init_context()
mutex_lock(parent_ctx->mutex); (B)
inherit_task_group()
inherit_group()
inherit_event()
perf_event_alloc()
perf_try_init_event() := hw_breakpoint_event_init()
register_perf_hw_breakpoint()
mutex_lock(child->perf_event_mutex); (A)
Which is against the normal (documented) order. Now, this is a false
positive in that child is not published yet, but also inherited events
never end up on ->perf_event_list.
Annotate this one away.
Fixes:
|
||
|
Peter Zijlstra
|
7be51cc1c6 |
perf: Fix pmu_filter_match()
Mark reported that the new for_each_sibling_event() assertion triggers
in pmu_filter_match() -- which isn't always called with IRQs disabled
or ctx->mutex held.
Fixes:
|
||
|
Peter Zijlstra
|
0ce38047e8 |
perf: Fix lockdep_assert_event_ctx()
I'm a flamin' moron; because even after Mark told me it should be '&&'
I still got it wrong in the final commit.
Fixes:
|
||
Wang Kefeng
|
e66372ecb8 |
ARM: 9246/1: dump: show page table level name
ARM could have 3 page table level if ARM_LPAE enabled, or only 2 page table level, let's show the page table level name when dump. Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Wang Kefeng
|
afd1efa1d8 |
ARM: 9245/1: dump: show FDT region
Since commit
|
||
Alex Sverdlin
|
823f606ab6 |
ARM: 9242/1: kasan: Only map modules if CONFIG_KASAN_VMALLOC=n
In case CONFIG_KASAN_VMALLOC=y kasan_populate_vmalloc() allocates the shadow pages dynamically. But even worse is that kasan_release_vmalloc() releases them, which is not compatible with create_mapping() of MODULES_VADDR..MODULES_END range: BUG: Bad page state in process kworker/9:1 pfn:2068b page:e5e06160 refcount:0 mapcount:0 mapping:00000000 index:0x0 flags: 0x1000(reserved) raw: 00001000 e5e06164 e5e06164 00000000 00000000 00000000 ffffffff 00000000 page dumped because: PAGE_FLAGS_CHECK_AT_FREE flag(s) set bad because of flags: 0x1000(reserved) Modules linked in: ip_tables CPU: 9 PID: 154 Comm: kworker/9:1 Not tainted 5.4.188-... #1 Hardware name: LSI Axxia AXM55XX Workqueue: events do_free_init unwind_backtrace show_stack dump_stack bad_page free_pcp_prepare free_unref_page kasan_depopulate_vmalloc_pte __apply_to_page_range apply_to_existing_page_range kasan_release_vmalloc __purge_vmap_area_lazy _vm_unmap_aliases.part.0 __vunmap do_free_init process_one_work worker_thread kthread Reviewed-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Alexander Sverdlin <alexander.sverdlin@nokia.com> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
Linus Walleij
|
8770b9e575 |
ARM: 9240/1: dma-mapping: Pass (void *) to virt_to_page()
Pointers to virtual memory functions are (void *) but the __dma_update_pte() function is passing an unsigned long. Fix this up by explicit cast. Signed-off-by: Linus Walleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
Li Huafei
|
752ec621ef |
ARM: 9234/1: stacktrace: Avoid duplicate saving of exception PC value
Because an exception stack frame is not created in the exception entry,
save_trace() does special handling for the exception PC, but this is
only needed when CONFIG_FRAME_POINTER_UNWIND=y. When
CONFIG_ARM_UNWIND=y, unwind annotations have been added to the exception
entry and save_trace() will repeatedly save the exception PC:
[0x7f000090] hrtimer_hander+0x8/0x10 [hrtimer]
[0x8019ec50] __hrtimer_run_queues+0x18c/0x394
[0x8019f760] hrtimer_run_queues+0xbc/0xd0
[0x8019def0] update_process_times+0x34/0x80
[0x801ad2a4] tick_periodic+0x48/0xd0
[0x801ad3dc] tick_handle_periodic+0x1c/0x7c
[0x8010f2e0] twd_handler+0x30/0x40
[0x80177620] handle_percpu_devid_irq+0xa0/0x23c
[0x801718d0] generic_handle_domain_irq+0x24/0x34
[0x80502d28] gic_handle_irq+0x74/0x88
[0x8085817c] generic_handle_arch_irq+0x58/0x78
[0x80100ba8] __irq_svc+0x88/0xc8
[0x80108114] arch_cpu_idle+0x38/0x3c
[0x80108114] arch_cpu_idle+0x38/0x3c <==== duplicate saved exception PC
[0x80861bf8] default_idle_call+0x38/0x130
[0x8015d5cc] do_idle+0x150/0x214
[0x8015d978] cpu_startup_entry+0x18/0x1c
[0x808589c0] rest_init+0xd8/0xdc
[0x80c00a44] arch_post_acpi_subsys_init+0x0/0x8
We can move the special handling of the exception PC in save_trace() to
the unwind_frame() of the frame pointer unwinder.
Signed-off-by: Li Huafei <lihuafei1@huawei.com>
Reviewed-by: Linus Waleij <linus.walleij@linaro.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
|
||
|
Li Huafei
|
5854e4d853 |
ARM: 9233/1: stacktrace: Skip frame pointer boundary check for call_with_stack()
When using the frame pointer unwinder, it was found that the stack trace output of stack_trace_save() is incomplete if the stack contains call_with_stack(): [0x7f00002c] dump_stack_task+0x2c/0x90 [hrtimer] [0x7f0000a0] hrtimer_hander+0x10/0x18 [hrtimer] [0x801a67f0] __hrtimer_run_queues+0x1b0/0x3b4 [0x801a7350] hrtimer_run_queues+0xc4/0xd8 [0x801a597c] update_process_times+0x3c/0x88 [0x801b5a98] tick_periodic+0x50/0xd8 [0x801b5bf4] tick_handle_periodic+0x24/0x84 [0x8010ffc4] twd_handler+0x38/0x48 [0x8017d220] handle_percpu_devid_irq+0xa8/0x244 [0x80176e9c] generic_handle_domain_irq+0x2c/0x3c [0x8052e3a8] gic_handle_irq+0x7c/0x90 [0x808ab15c] generic_handle_arch_irq+0x60/0x80 [0x8051191c] call_with_stack+0x1c/0x20 For the frame pointer unwinder, unwind_frame() checks stackframe::fp by stackframe::sp. Since call_with_stack() switches the SP from one stack to another, stackframe::fp and stackframe: :sp will point to different stacks, so we can no longer check stackframe::fp by stackframe::sp. Skip checking stackframe::fp at this point to avoid this problem. Signed-off-by: Li Huafei <lihuafei1@huawei.com> Reviewed-by: Linus Waleij <linus.walleij@linaro.org> Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk> |
||
|
Arnd Bergmann
|
e19d4ebc53 |
alpha: add full ioread64/iowrite64 implementation
The previous patch introduced ioread64/iowrite64 declarations, but
this means we no longer get the io-64-nonatomic variant, and
run into a long error when someone actually wants to use these:
ERROR: modpost: "ioread64" [drivers/net/ethernet/freescale/enetc/fsl-enetc.ko] undefined!
Add the (hopefully) correct implementation for each machine type,
based on the 32-bit accessor. Since the 32-bit return type does
not work for ioread64(), change the internal implementation to use
the correct width consistently, but leave the external interface
to match the asm-generic/iomap.h header that uses 32-bit or 64-bit
return values.
Reported-by: Guenter Roeck <linux@roeck-us.net>
Tested-by: Guenter Roeck <linux@roeck-us.net>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Fixes:
|
||
Thomas Gleixner
|
6cb5ce1335 |
- Added DT bindings for Mediatek MT8188 (Johnson Wang)
- Added DT bindings for Renesas r8a779f0 (Wolfram Sang) - Added support for RZ/V2L SoC (Lad Prabhakar) - Rename TIMER_IRQ_EN to TIMER_IRQ_CLEAR to prevent confusion on sun4i (Victor Hassan) - Added support for Exynos ARTPEC-8 MCT, including DT bindings (Vincent Whitchurch) - Fixed handling of ARM erratum 858921 on the ARM Arch timer (Kunkun Jiang) - Added missing call platform_device_put() in the error path on ther GXP timer (Lin Yujun) - Cleaned the timer TI DM driver by self-encapsulating the code, dropping dead code and simplifying some functions (Tony Lindgren) - Added a DT property to tell the driver the clock is no longer divided on recent NXP hardware (Peng Fan) - Fixed the CNTPCT_LO and CNTVCT_LO values in the ARM arch timer (Yang Guo) -----BEGIN PGP SIGNATURE----- iQEzBAABCAAdFiEEGn3N4YVz0WNVyHskqDIjiipP6E8FAmM0RNsACgkQqDIjiipP 6E/SaQf/boA13P8weR7wx0MHdN5HhrJ/5q4/dwKs27LtRTWPUH0jzn49KGXRhxnc K5cO5x/SGIoYbS+GIq8A/gKj3WomXwmlY3ViTdD1jvR3tEOlvmkbx0JaTCmoELHF tSF1wy9ZqKzqaJ5J9VBaAI6NBFaF5oNqAzj6flXafjHpo9NH5E6sfn0SYPBjN16L GYNoiW30XUnPqkKlZV0rJMvszq6wDz2tt5gcHGxN9shWqWoL3kaQJa9+iymMvf/d EK6CG68fpvFaE9qZbMZkehbsF6llN5X94A4xvx3qLkB5PPvjubiDpciF7BwriTZ9 gG5U0mmYQczd8858MCcEr8gsIN/j/A== =Ogb4 -----END PGP SIGNATURE----- Merge tag 'timers-v6.1-rc1' of https://git.linaro.org/people/daniel.lezcano/linux into timers/core Pull clocksource/event updates from Daniel Lezcano: - Added DT bindings for Mediatek MT8188 (Johnson Wang) - Added DT bindings for Renesas r8a779f0 (Wolfram Sang) - Added support for RZ/V2L SoC (Lad Prabhakar) - Rename TIMER_IRQ_EN to TIMER_IRQ_CLEAR to prevent confusion on sun4i (Victor Hassan) - Added support for Exynos ARTPEC-8 MCT, including DT bindings (Vincent Whitchurch) - Fixed handling of ARM erratum 858921 on the ARM Arch timer (Kunkun Jiang) - Added missing call platform_device_put() in the error path on ther GXP timer (Lin Yujun) - Cleaned the timer TI DM driver by self-encapsulating the code, dropping dead code and simplifying some functions (Tony Lindgren) - Added a DT property to tell the driver the clock is no longer divided on recent NXP hardware (Peng Fan) - Fixed the CNTPCT_LO and CNTVCT_LO values in the ARM arch timer (Yang Guo) Link: https://lore.kernel.org/r/b28ac4b0-5745-b3a9-b7e7-cc86dcb1b023@linaro.org |