commit d82dcd9e21b77d338dc4875f3d4111f0db314a7c upstream.
Reiserfs sets a security xattr at inode creation time in two stages: first,
it calls reiserfs_security_init() to obtain the xattr from active LSMs;
then, it calls reiserfs_security_write() to actually write that xattr.
Unfortunately, it seems there is a wrong expectation that LSMs provide the
full xattr name in the form 'security.<suffix>'. However, LSMs always
provided just the suffix, causing reiserfs to not write the xattr at all
(if the suffix is shorter than the prefix), or to write an xattr with the
wrong name.
Add a temporary buffer in reiserfs_security_write(), and write to it the
full xattr name, before passing it to reiserfs_xattr_set_handle().
Also replace the name length check with a check that the full xattr name is
not larger than XATTR_NAME_MAX.
Cc: stable@vger.kernel.org # v2.6.x
Fixes: 57fe60df62 ("reiserfs: add atomic addition of selinux attributes during inode creation")
Signed-off-by: Roberto Sassu <roberto.sassu@huawei.com>
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e3184de9d46c2eebdb776face2e2662c6733331d upstream.
'obj-$(CONFIG_SYSCTL) += sysctls.o' must be moved after "obj-y :=",
or it won't be built as it is overwrited.
Note that there is nothing that is going to break by linking
sysctl.o later, we were just being way to cautious and patches
have been updated to reflect these considerations and sent for
stable as well with the whole "base" stuff needing to be linked
prior to child sysctl tables that use that directory. All of
the kernel sysctl APIs always share the same directory, and races
against using it should end up re-using the same single created
directory.
And so something we can do eventually is do away with all the base stuff.
For now it's fine, it's not creating an issue. It is just a bit pedantic
and careful.
Fixes: ab171b952c ("fs: move namespace sysctls and declare fs base directory")
Cc: stable@vger.kernel.org # v5.17
Cc: Christian Brauner <brauner@kernel.org>
Cc: Kefeng Wang <wangkefeng.wang@huawei.com>
Signed-off-by: Kefeng Wang <wangkefeng.wang@huawei.com>
[mcgrof: enhanced commit log for stable criteria and clarify base stuff ]
Signed-off-by: Luis Chamberlain <mcgrof@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6715c98b6cf003f26b1b2f655393134e9d999a05 upstream.
Add a blk_crypto_config_supported_natively helper that wraps
__blk_crypto_cfg_supported to retrieve the crypto_profile from the
request queue. With this fscrypt can stop including
blk-crypto-profile.h and rely on the public consumer interface in
blk-crypto.h.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-3-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit fce3caea0f241f5d34855c82c399d5e0e2d91f07 upstream.
Switch all public blk-crypto interfaces to use struct block_device
arguments to specify the device they operate on instead of th
request_queue, which is a block layer implementation detail.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Eric Biggers <ebiggers@google.com>
Link: https://lore.kernel.org/r/20221114042944.1009870-2-hch@lst.de
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 8ba7d5f5ba931be68a94b8c91bcced1622934e7a upstream.
There are some warnings on older compilers (gcc 10, 7) or non-x86_64
architectures (aarch64). As btrfs wants to enable -Wmaybe-uninitialized
by default, fix the warnings even though it's not necessary on recent
compilers (gcc 12+).
../fs/btrfs/volumes.c: In function ‘btrfs_init_new_device’:
../fs/btrfs/volumes.c:2703:3: error: ‘seed_devices’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
2703 | btrfs_setup_sprout(fs_info, seed_devices);
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/btrfs/send.c: In function ‘get_cur_inode_state’:
../include/linux/compiler.h:70:32: error: ‘right_gen’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
70 | (__if_trace.miss_hit[1]++,1) : \
| ^
../fs/btrfs/send.c:1878:6: note: ‘right_gen’ was declared here
1878 | u64 right_gen;
| ^~~~~~~~~
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Genjian Zhang <zhanggenjian@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
[ update changelog ]
Signed-off-by: David Sterba <dsterba@suse.com>
Cc: Ammar Faizi <ammarfaizi2@gnuweeb.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ccc031e26afe60d2a5a3d93dabd9c978210825fb upstream.
The previous commit df8629af29 ("fuse: always revalidate if exclusive
create") ensures that the dentries are revalidated on O_EXCL creates. This
commit complements it by also performing revalidation for rename target
dentries. Otherwise, a rename target file that only exists in kernel
dentry cache but not in the filesystem will result in EEXIST if
RENAME_NOREPLACE flag is used.
Signed-off-by: Jiachen Zhang <zhangjiachen.jaycee@bytedance.com>
Signed-off-by: Zhang Tianci <zhangtianci.1997@bytedance.com>
Signed-off-by: Miklos Szeredi <mszeredi@redhat.com>
Signed-off-by: Yang Bo <yb203166@antfin.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 1ba1199ec5747f475538c0d25a32804e5ba1dfde upstream.
KASAN report null-ptr-deref:
==================================================================
BUG: KASAN: null-ptr-deref in bdi_split_work_to_wbs+0x5c5/0x7b0
Write of size 8 at addr 0000000000000000 by task sync/943
CPU: 5 PID: 943 Comm: sync Tainted: 6.3.0-rc5-next-20230406-dirty #461
Call Trace:
<TASK>
dump_stack_lvl+0x7f/0xc0
print_report+0x2ba/0x340
kasan_report+0xc4/0x120
kasan_check_range+0x1b7/0x2e0
__kasan_check_write+0x24/0x40
bdi_split_work_to_wbs+0x5c5/0x7b0
sync_inodes_sb+0x195/0x630
sync_inodes_one_sb+0x3a/0x50
iterate_supers+0x106/0x1b0
ksys_sync+0x98/0x160
[...]
==================================================================
The race that causes the above issue is as follows:
cpu1 cpu2
-------------------------|-------------------------
inode_switch_wbs
INIT_WORK(&isw->work, inode_switch_wbs_work_fn)
queue_rcu_work(isw_wq, &isw->work)
// queue_work async
inode_switch_wbs_work_fn
wb_put_many(old_wb, nr_switched)
percpu_ref_put_many
ref->data->release(ref)
cgwb_release
queue_work(cgwb_release_wq, &wb->release_work)
// queue_work async
&wb->release_work
cgwb_release_workfn
ksys_sync
iterate_supers
sync_inodes_one_sb
sync_inodes_sb
bdi_split_work_to_wbs
kmalloc(sizeof(*work), GFP_ATOMIC)
// alloc memory failed
percpu_ref_exit
ref->data = NULL
kfree(data)
wb_get(wb)
percpu_ref_get(&wb->refcnt)
percpu_ref_get_many(ref, 1)
atomic_long_add(nr, &ref->data->count)
atomic64_add(i, v)
// trigger null-ptr-deref
bdi_split_work_to_wbs() traverses &bdi->wb_list to split work into all
wbs. If the allocation of new work fails, the on-stack fallback will be
used and the reference count of the current wb is increased afterwards.
If cgroup writeback membership switches occur before getting the reference
count and the current wb is released as old_wd, then calling wb_get() or
wb_put() will trigger the null pointer dereference above.
This issue was introduced in v4.3-rc7 (see fix tag1). Both
sync_inodes_sb() and __writeback_inodes_sb_nr() calls to
bdi_split_work_to_wbs() can trigger this issue. For scenarios called via
sync_inodes_sb(), originally commit 7fc5854f8c ("writeback: synchronize
sync(2) against cgroup writeback membership switches") reduced the
possibility of the issue by adding wb_switch_rwsem, but in v5.14-rc1 (see
fix tag2) removed the "inode_io_list_del_locked(inode, old_wb)" from
inode_switch_wbs_work_fn() so that wb->state contains WB_has_dirty_io,
thus old_wb is not skipped when traversing wbs in bdi_split_work_to_wbs(),
and the issue becomes easily reproducible again.
To solve this problem, percpu_ref_exit() is called under RCU protection to
avoid race between cgwb_release_workfn() and bdi_split_work_to_wbs().
Moreover, replace wb_get() with wb_tryget() in bdi_split_work_to_wbs(),
and skip the current wb if wb_tryget() fails because the wb has already
been shutdown.
Link: https://lkml.kernel.org/r/20230410130826.1492525-1-libaokun1@huawei.com
Fixes: b817525a4a ("writeback: bdi_writeback iteration must not skip dying ones")
Signed-off-by: Baokun Li <libaokun1@huawei.com>
Reviewed-by: Jan Kara <jack@suse.cz>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Alexander Viro <viro@zeniv.linux.org.uk>
Cc: Andreas Dilger <adilger.kernel@dilger.ca>
Cc: Christian Brauner <brauner@kernel.org>
Cc: Dennis Zhou <dennis@kernel.org>
Cc: Hou Tao <houtao1@huawei.com>
Cc: yangerkun <yangerkun@huawei.com>
Cc: Zhang Yi <yi.zhang@huawei.com>
Cc: Jens Axboe <axboe@kernel.dk>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ef832747a82dfbc22a3702219cc716f449b24e4a upstream.
Syzbot still reports uninit-value in nilfs_add_checksums_on_logs() for
KMSAN enabled kernels after applying commit 7397031622e0 ("nilfs2:
initialize "struct nilfs_binfo_dat"->bi_pad field").
This is because the unused bytes at the end of each block in segment
summaries are not initialized. So this fixes the issue by padding the
unused bytes with null bytes.
Link: https://lkml.kernel.org/r/20230417173513.12598-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+048585f3f4227bb2b49b@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?extid=048585f3f4227bb2b49b
Cc: Alexander Potapenko <glider@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit d47704bd1c78c85831561bcf701b90dd66f811b2 upstream.
At find_delalloc_subrange(), when we need to get the next extent map, we
do a full search on the extent map tree (a red black tree). This is fine
but it's a lot more efficient to simply use rb_next(), which typically
requires iterating over less nodes of the tree and never needs to compare
the ranges of nodes with the one we are looking for.
So add a public helper to extent_map.{h,c} to get the extent map that
immediately follows another extent map, using rb_next(), and use that
helper at find_delalloc_subrange().
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ff559f31a5d50c31a3f9d849f8af90dc36c7105 upstream.
This is a proposal to revert commit 914eedcb9b.
I found this when writing a simple UFFDIO_API test to be the first unit
test in this set. Two things breaks with the commit:
- UFFDIO_API check was lost and missing. According to man page, the
kernel should reject ioctl(UFFDIO_API) if uffdio_api.api != 0xaa. This
check is needed if the api version will be extended in the future, or
user app won't be able to identify which is a new kernel.
- Feature flags checks were removed, which means UFFDIO_API with a
feature that does not exist will also succeed. According to the man
page, we should (and it makes sense) to reject ioctl(UFFDIO_API) if
unknown features passed in.
Link: https://lore.kernel.org/r/20220722201513.1624158-1-axelrasmussen@google.com
Link: https://lkml.kernel.org/r/20230412163922.327282-2-peterx@redhat.com
Fixes: 914eedcb9b ("userfaultfd: don't fail on unrecognized features")
Signed-off-by: Peter Xu <peterx@redhat.com>
Acked-by: David Hildenbrand <david@redhat.com>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Dmitry Safonov <0x7f454c46@gmail.com>
Cc: Mike Kravetz <mike.kravetz@oracle.com>
Cc: Mike Rapoport (IBM) <rppt@kernel.org>
Cc: Zach O'Keefe <zokeefe@google.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 5105a7ffce19160e7062aee67fb6b3b8a1b56d78 ]
smb311_decode_neg_context() doesn't properly check against SMB packet
boundaries prior to accessing individual negotiate context entries. This
is due to the length check omitting the eight byte smb2_neg_context
header, as well as incorrect decrementing of len_of_ctxts.
Fixes: 5100d8a3fe ("SMB311: Improve checking of negotiate security contexts")
Reported-by: Volker Lendecke <vl@samba.org>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: David Disseldorp <ddiss@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e7067a446264a7514fa1cfaa4052cdb6803bc6a2 upstream.
Confirm that the accessed pneg_ctxt->HashAlgorithms address sits within
the SMB request boundary; deassemble_neg_contexts() only checks that the
eight byte smb2_neg_context header + (client controlled) DataLength are
within the packet boundary, which is insufficient.
Checking for sizeof(struct smb2_preauth_neg_context) is overkill given
that the type currently assumes SMB311_SALT_SIZE bytes of trailing Salt.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 68d99ab0e9221ef54506f827576c5a914680eeaf upstream.
The BTRFS_FS_CSUM_IMPL_FAST flag is currently set whenever a non-generic
crc32c is detected, which is the incorrect check if the file system uses
a different checksumming algorithm. Refactor the code to only check
this if crc32c is actually used. Note that in an ideal world the
information if an algorithm is hardware accelerated or not should be
provided by the crypto API instead, but that's left for another day.
CC: stable@vger.kernel.org # 5.4.x: c8a5f8ca9a: btrfs: print checksum type and implementation at mount time
CC: stable@vger.kernel.org # 5.4.x
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 40fac6472f22a59f5694496e179988ab4a1dfe07 upstream.
Commit d7b9416fe5 ("btrfs: remove btrfs_end_io_wq") converted the read
and I/O handling from btrfs_workqueues to Linux workqueues, and as part
of that lost the code to apply the thread_pool= based max_active limit
on remount. Restore it.
Fixes: d7b9416fe5 ("btrfs: remove btrfs_end_io_wq")
CC: stable@vger.kernel.org # 6.0+
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit cb2239c198ad9fbd5aced22cf93e45562da781eb upstream.
When cleaning up peer group ids in the failure path we need to make sure
to hold on to the namespace lock. Otherwise another thread might just
turn the mount from a shared into a non-shared mount concurrently.
Link: https://lore.kernel.org/lkml/00000000000088694505f8132d77@google.com
Fixes: 2a1867219c ("fs: add mount_setattr()")
Reported-by: syzbot+8ac3859139c685c4f597@syzkaller.appspotmail.com
Cc: stable@vger.kernel.org # 5.12+
Message-Id: <20230330-vfs-mount_setattr-propagation-fix-v1-1-37548d91533b@kernel.org>
Signed-off-by: Christian Brauner <brauner@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d19342c6609b67f2ba83b9eccca2777e3687f625 ]
After a server reboot, clients are failing to move files with ENOENT.
This is caused by DFS referrals containing multiple separators, which
the server move call doesn't recognize.
v1: Initial patch.
v2: Move prototype to header.
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2182472
Fixes: a31080899d ("cifs: sanitize multiple delimiters in prepath")
Actually-Fixes: 24e0a1eff9 ("cifs: switch to new mount api")
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Thiago Rafael Becker <tbecker@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit e416ea62a9166e6075a07a970cc5bf79255d2700 upstream.
Commit 83dcedd5540d ("ksmbd: fix infinite loop in ksmbd_conn_handler_loop()"),
changes GFP modifiers passed to kvmalloc(). This cause xfstests generic/551
test to fail. We limit pdu length size according to connection status and
maximum number of connections. In the rest, memory allocation of request
is limited by credit management. so these flags are no longer needed.
Fixes: 83dcedd5540d ("ksmbd: fix infinite loop in ksmbd_conn_handler_loop()")
Cc: stable@vger.kernel.org
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 42560f9c92cc43dce75dbf06cc0d840dced39b12 upstream.
The current nilfs2 sysfs support has issues with the timing of creation
and deletion of sysfs entries, potentially leading to null pointer
dereferences, use-after-free, and lockdep warnings.
Some of the sysfs attributes for nilfs2 per-filesystem instance refer to
metadata file "cpfile", "sufile", or "dat", but
nilfs_sysfs_create_device_group that creates those attributes is executed
before the inodes for these metadata files are loaded, and
nilfs_sysfs_delete_device_group which deletes these sysfs entries is
called after releasing their metadata file inodes.
Therefore, access to some of these sysfs attributes may occur outside of
the lifetime of these metadata files, resulting in inode NULL pointer
dereferences or use-after-free.
In addition, the call to nilfs_sysfs_create_device_group() is made during
the locking period of the semaphore "ns_sem" of nilfs object, so the
shrinker call caused by the memory allocation for the sysfs entries, may
derive lock dependencies "ns_sem" -> (shrinker) -> "locks acquired in
nilfs_evict_inode()".
Since nilfs2 may acquire "ns_sem" deep in the call stack holding other
locks via its error handler __nilfs_error(), this causes lockdep to report
circular locking. This is a false positive and no circular locking
actually occurs as no inodes exist yet when
nilfs_sysfs_create_device_group() is called. Fortunately, the lockdep
warnings can be resolved by simply moving the call to
nilfs_sysfs_create_device_group() out of "ns_sem".
This fixes these sysfs issues by revising where the device's sysfs
interface is created/deleted and keeping its lifetime within the lifetime
of the metadata files above.
Link: https://lkml.kernel.org/r/20230330205515.6167-1-konishi.ryusuke@gmail.com
Fixes: dd70edbde2 ("nilfs2: integrate sysfs support into driver")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+979fa7f9c0d086fdc282@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/0000000000003414b505f7885f7e@google.com
Reported-by: syzbot+5b7d542076d9bddc3c6a@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/0000000000006ac86605f5f44eb9@google.com
Cc: Viacheslav Dubeyko <slava@dubeyko.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6be49d100c22ffea3287a4b19d7639d259888e33 upstream.
The finalization of nilfs_segctor_thread() can race with
nilfs_segctor_kill_thread() which terminates that thread, potentially
causing a use-after-free BUG as KASAN detected.
At the end of nilfs_segctor_thread(), it assigns NULL to "sc_task" member
of "struct nilfs_sc_info" to indicate the thread has finished, and then
notifies nilfs_segctor_kill_thread() of this using waitqueue
"sc_wait_task" on the struct nilfs_sc_info.
However, here, immediately after the NULL assignment to "sc_task", it is
possible that nilfs_segctor_kill_thread() will detect it and return to
continue the deallocation, freeing the nilfs_sc_info structure before the
thread does the notification.
This fixes the issue by protecting the NULL assignment to "sc_task" and
its notification, with spinlock "sc_state_lock" of the struct
nilfs_sc_info. Since nilfs_segctor_kill_thread() does a final check to
see if "sc_task" is NULL with "sc_state_lock" locked, this can eliminate
the race.
Link: https://lkml.kernel.org/r/20230327175318.8060-1-konishi.ryusuke@gmail.com
Reported-by: syzbot+b08ebcc22f8f3e6be43a@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/00000000000000660d05f7dfa877@google.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 7de82c2f36fb26aa78440bbf0efcf360b691d98b ]
Currently callback request does not use the credential specified in
CREATE_SESSION if the security flavor for the back channel is AUTH_SYS.
Problem was discovered by pynfs 4.1 DELEG5 and DELEG7 test with error:
DELEG5 st_delegation.testCBSecParms : FAILURE
expected callback with uid, gid == 17, 19, got 0, 0
Signed-off-by: Dai Ngo <dai.ngo@oracle.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Fixes: 8276c902bb ("SUNRPC: remove uid and gid from struct auth_cred")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15a8b55dbb1ba154d82627547c5761cac884d810 ]
For ops with "trivial" replies, nfsd4_encode_operation will shortcut
most of the encoding work and skip to just marshalling up the status.
One of the things it skips is calling op_release. This could cause a
memory leak in the layoutget codepath if there is an error at an
inopportune time.
Have the compound processing engine always call op_release, even when
op_func sets an error in op->status. With this change, we also need
nfsd4_block_get_device_info_scsi to set the gd_device pointer to NULL
on error to avoid a double free.
Reported-by: Zhi Li <yieli@redhat.com>
Link: https://bugzilla.redhat.com/show_bug.cgi?id=2181403
Fixes: 34b1744c91 ("nfsd4: define ->op_release for compound ops")
Signed-off-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 804d8e0a6e54427268790472781e03bc243f4ee3 ]
OPDESC() simply indexes into nfsd4_ops[] by the op's operation
number, without range checking that value. It assumes callers are
careful to avoid calling it with an out-of-bounds opnum value.
nfsd4_decode_compound() is not so careful, and can invoke OPDESC()
with opnum set to OP_ILLEGAL, which is 10044 -- well beyond the end
of nfsd4_ops[].
Reported-by: Jeff Layton <jlayton@kernel.org>
Fixes: f4f9ef4a1b ("nfsd4: opdesc will be useful outside nfs4proc.c")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 6165a16a5ad9b237bb3131cff4d3c601ccb8f9a3 upstream.
When we're using a cached open stateid or a delegation in order to avoid
sending a CLAIM_PREVIOUS open RPC call to the server, we don't have a
new open stateid to present to update_open_stateid().
Instead rely on nfs4_try_open_cached(), just as if we were doing a
normal open.
Fixes: d2bfda2e7a ("NFSv4: don't reprocess cached open CLAIM_PREVIOUS")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit c1976bd8f23016d8706973908f2bb0ac0d852a8f upstream.
When a direct append write is executed, the append offset may correspond
to the last page of a sequential file inode which might have been cached
already by buffered reads, page faults with mmap-read or non-direct
readahead. To ensure that the on-disk and cached data is consistant for
such last cached page, make sure to always invalidate it in
zonefs_file_dio_append(). If the invalidation fails, return -EBUSY to
userspace to differentiate from IO errors.
This invalidation will always be a no-op when the FS block size (device
zone write granularity) is equal to the page size (e.g. 4K).
Reported-by: Hans Holmberg <Hans.Holmberg@wdc.com>
Fixes: 02ef12a663 ("zonefs: use REQ_OP_ZONE_APPEND for sync DIO")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 77af13ba3c7f91d91c377c7e2d122849bbc17128 upstream.
The call to invalidate_inode_pages2_range() in __iomap_dio_rw() may
fail, in which case -ENOTBLK is returned and this error code is
propagated back to user space trhough iomap_dio_rw() ->
zonefs_file_dio_write() return chain. This error code is fairly obscure
and may confuse the user. Avoid this and be consistent with the behavior
of zonefs_file_dio_append() for similar invalidate_inode_pages2_range()
errors by returning -EBUSY to user space when iomap_dio_rw() returns
-ENOTBLK.
Suggested-by: Christoph Hellwig <hch@infradead.org>
Fixes: 8dcc1a9d90 ("fs: New zonefs file system")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Hans Holmberg <hans.holmberg@wdc.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 50d281fc434cb8e2497f5e70a309ccca6b1a09f0 upstream.
This fixes mkfs/mount/check failures due to race with systemd-udevd
scan.
During the device scan initiated by systemd-udevd, other user space
EXCL operations such as mkfs, mount, or check may get blocked and result
in a "Device or resource busy" error. This is because the device
scan process opens the device with the EXCL flag in the kernel.
Two reports were received:
- btrfs/179 test case, where the fsck command failed with the -EBUSY
error
- LTP pwritev03 test case, where mkfs.vfs failed with
the -EBUSY error, when mkfs.vfs tried to overwrite old btrfs filesystem
on the device.
In both cases, fsck and mkfs (respectively) were racing with a
systemd-udevd device scan, and systemd-udevd won, resulting in the
-EBUSY error for fsck and mkfs.
Reproducing the problem has been difficult because there is a very
small window during which these userspace threads can race to
acquire the exclusive device open. Even on the system where the problem
was observed, the problem occurrences were anywhere between 10 to 400
iterations and chances of reproducing decreases with debug printk()s.
However, an exclusive device open is unnecessary for the scan process,
as there are no write operations on the device during scan. Furthermore,
during the mount process, the superblock is re-read in the below
function call chain:
btrfs_mount_root
btrfs_open_devices
open_fs_devices
btrfs_open_one_device
btrfs_get_bdev_and_sb
So, to fix this issue, removes the FMODE_EXCL flag from the scan
operation, and add a comment.
The case where mkfs may still write to the device and a scan is running,
the btrfs signature is not written at that time so scan will not
recognize such device.
Reported-by: Sherry Yang <sherry.yang@oracle.com>
Reported-by: kernel test robot <oliver.sang@intel.com>
Link: https://lore.kernel.org/oe-lkp/202303170839.fdf23068-oliver.sang@intel.com
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 179a88a8558bbf42991d361595281f3e45d7edfc upstream.
When compiled with CONFIG_CIFS_DFS_UPCALL disabled, cifs_dfs_d_automount
is NULL. cifs.ko logic for mapping CIFS_FATTR_DFS_REFERRAL attributes to
S_AUTOMOUNT and corresponding dentry flags is retained regardless of
CONFIG_CIFS_DFS_UPCALL, leading to a NULL pointer dereference in
VFS follow_automount() when traversing a DFS referral link:
BUG: kernel NULL pointer dereference, address: 0000000000000000
...
Call Trace:
<TASK>
__traverse_mounts+0xb5/0x220
? cifs_revalidate_mapping+0x65/0xc0 [cifs]
step_into+0x195/0x610
? lookup_fast+0xe2/0xf0
path_lookupat+0x64/0x140
filename_lookup+0xc2/0x140
? __create_object+0x299/0x380
? kmem_cache_alloc+0x119/0x220
? user_path_at_empty+0x31/0x50
user_path_at_empty+0x31/0x50
__x64_sys_chdir+0x2a/0xd0
? exit_to_user_mode_prepare+0xca/0x100
do_syscall_64+0x42/0x90
entry_SYSCALL_64_after_hwframe+0x72/0xdc
This fix adds an inline cifs_dfs_d_automount() {return -EREMOTE} handler
when CONFIG_CIFS_DFS_UPCALL is disabled. An alternative would be to
avoid flagging S_AUTOMOUNT, etc. without CONFIG_CIFS_DFS_UPCALL. This
approach was chosen as it provides more control over the error path.
Signed-off-by: David Disseldorp <ddiss@suse.de>
Cc: stable@vger.kernel.org
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 09ba47b44d26b475bbdf9c80db9e0193d2b58956 upstream.
We can't call smb_init() in CIFSGetDFSRefer() as cifs_reconnect_tcon()
may end up calling CIFSGetDFSRefer() again to get new DFS referrals
and thus causing an infinite recursion.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Reviewed-by: Ronnie Sahlberg <lsahlber@redhat.com>
Cc: stable@vger.kernel.org # 6.2
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit df384da5a49cace5c5e3100803dfd563fd982f93 ]
We do
cache->space_info->counter += num_bytes;
everywhere in here. This is makes the lines longer than they need to
be, and will be especially noticeable when we add the active tracking in,
so add a temp variable for the space_info so this is cleaner.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit efbf35a102b20246cfe4409c6ae92e72ecb67ab8 ]
reclaim isn't set in the alloc case, however we only care about
reclaim in the !alloc case. This isn't an actual problem, however
-Wmaybe-uninitialized will complain, so initialize reclaim to quiet the
compiler.
Reviewed-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Stable-dep-of: df384da5a49c ("btrfs: use temporary variable for space_info in btrfs_update_block_group")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c24bb1a87dc3f2d77d410eaac2c6a295961bf50e ]
Make sure to unload_nls() @nls_codepage if we no longer need it.
Fixes: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: Shyam Prasad N <sprasad@microsoft.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit fa2068d7e922b434eba5bfb0131e6d39febfdb48 ]
The naming of space_info->active_total_bytes is misleading. It counts
not only active block groups but also full ones which are previously
active but now inactive. That confusion results in a bug not counting
the full BGs into active_total_bytes on mount time.
For a background, there are three kinds of block groups in terms of
activation.
1. Block groups never activated
2. Block groups currently active
3. Block groups previously active and currently inactive (due to fully
written or zone finish)
What we really wanted to exclude from "total_bytes" is the total size of
BGs #1. They seem empty and allocatable but since they are not activated,
we cannot rely on them to do the space reservation.
And, since BGs #1 never get activated, they should have no "used",
"reserved" and "pinned" bytes.
OTOH, BGs #3 can be counted in the "total", since they are already full
we cannot allocate from them anyway. For them, "total_bytes == used +
reserved + pinned + zone_unusable" should hold.
Tracking #2 and #3 as "active_total_bytes" (current implementation) is
confusing. And, tracking #1 and subtract that properly from "total_bytes"
every time you need space reservation is cumbersome.
Instead, we can count the whole region of a newly allocated block group as
zone_unusable. Then, once that block group is activated, release
[0 .. zone_capacity] from the zone_unusable counters. With this, we can
eliminate the confusing ->active_total_bytes and the code will be common
among regular and the zoned mode. Also, no additional counter is needed
with this approach.
Fixes: 6a921de589 ("btrfs: zoned: introduce space_info->active_total_bytes")
CC: stable@vger.kernel.org # 6.1+
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bf1f1fec2724a33b67ec12032402ea75f2a83622 ]
This flag only gets set when we're doing active zone tracking, and we're
going to need to use this flag for things related to this behavior.
Rename the flag to represent what it actually means for the file system
so it can be used in other ways and still make sense.
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a075bacde257f755bea0e53400c9f1cdd1b8e8e6 ]
The full pagecache drop at the end of FS_IOC_ENABLE_VERITY is causing
performance problems and is hindering adoption of fsverity. It was
intended to solve a race condition where unverified pages might be left
in the pagecache. But actually it doesn't solve it fully.
Since the incomplete solution for this race condition has too much
performance impact for it to be worth it, let's remove it for now.
Fixes: 3fda4c617e ("fs-verity: implement FS_IOC_ENABLE_VERITY ioctl")
Cc: stable@vger.kernel.org
Reviewed-by: Victor Hsieh <victorhsieh@google.com>
Link: https://lore.kernel.org/r/20230314235332.50270-1-ebiggers@kernel.org
Signed-off-by: Eric Biggers <ebiggers@google.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 88b170088ad2c3e27086fe35769aa49f8a512564 ]
Since the expected write location in a sequential file is always at the
end of the file (append write), when an invalid write append location is
detected in zonefs_file_dio_append(), print the invalid written location
instead of the expected write location.
Fixes: a608da3bd730 ("zonefs: Detect append writes at invalid locations")
Cc: stable@vger.kernel.org
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: Himanshu Madhani <himanshu.madhani@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aa7f243f32e1d18036ee00d71d3ccfad70ae2121 ]
In preparation for adding dynamic inode allocation, separate an inode
zone information from the zonefs inode structure. The new data structure
zonefs_zone is introduced to store in memory information about a zone
that must be kept throughout the lifetime of the device mount.
Linking between a zone file inode and its zone information is done by
setting the inode i_private field to point to a struct zonefs_zone.
Using the i_private pointer avoids the need for adding a pointer in
struct zonefs_inode_info. Beside the vfs inode, this structure is
reduced to a mutex and a write open counter.
One struct zonefs_zone is created per file inode on mount. These
structures are organized in an array using the new struct
zonefs_zone_group data structure to represent zone groups. The
zonefs_zone arrays are indexed per file number (the index of a struct
zonefs_zone in its array directly gives the file number/name for that
zone file inode).
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Stable-dep-of: 88b170088ad2 ("zonefs: Fix error message in zonefs_file_dio_append()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34422914dc00b291d1c47dbdabe93b154c2f2b25 ]
Instead of using the i_ztype field in struct zonefs_inode_info to
indicate the zone type of an inode, introduce the new inode flag
ZONEFS_ZONE_CNV to be set in the i_flags field of struct
zonefs_inode_info to identify conventional zones. If this flag is not
set, the zone of an inode is considered to be a sequential zone.
The helpers zonefs_zone_is_cnv(), zonefs_zone_is_seq(),
zonefs_inode_is_cnv() and zonefs_inode_is_seq() are introduced to
simplify testing the zone type of a struct zonefs_inode_info and of a
struct inode.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Stable-dep-of: 88b170088ad2 ("zonefs: Fix error message in zonefs_file_dio_append()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 46a9c526eef7fb68a00321e2a9591ce5276ae92b ]
Simplify zonefs_check_zone_condition() by moving the code that changes
an inode access rights to the new function zonefs_inode_update_mode().
Furthermore, since on mount an inode wpoffset is always zero when
zonefs_check_zone_condition() is called during an inode initialization,
the "mount" boolean argument is not necessary for the readonly zone
case. This argument is thus removed.
zonefs_io_error_cb() is also modified to use the inode offline and
zone state flags instead of checking the device zone condition. The
multiple calls to zonefs_check_zone_condition() are reduced to the first
call on entry, which allows removing the "warn" argument.
zonefs_inode_update_mode() is also used to update an inode access rights
as zonefs_io_error_cb() modifies the inode flags depending on the volume
error handling mode (defined with a mount option). Since an inode mode
change differs for read-only zones between mount time and IO error time,
the flag ZONEFS_ZONE_INIT_MODE is used to differentiate both cases.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Stable-dep-of: 88b170088ad2 ("zonefs: Fix error message in zonefs_file_dio_append()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4008e2a0b01aba982356fd15b128a47bf11bd9c7 ]
Move all code related to zone file operations from super.c to the new
file.c file. Inode and zone management code remains in super.c.
Signed-off-by: Damien Le Moal <damien.lemoal@opensource.wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Stable-dep-of: 88b170088ad2 ("zonefs: Fix error message in zonefs_file_dio_append()")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bc962159e8e326af634a506508034a375bf2b858 ]
When multiple processes/channels do reconnects in parallel
we used to return success immediately
negotiate/session-setup/tree-connect, causing race conditions
between processes that enter the function in parallel.
This caused several errors related to session not found to
show up during parallel reconnects.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1bcd548d935a33c6fc58331405eb1b82fd6150de ]
Make sure to get an up-to-date TCP_Server_Info::nr_targets value prior
to waiting the server to be reconnected in cifs_reconnect_tcon(). It
is set in cifs_tcp_ses_needs_reconnect() and protected by
TCP_Server_Info::srv_lock.
Create a new cifs_wait_for_server_reconnect() helper that can be used
by both SMB2+ and CIFS reconnect code.
Signed-off-by: Paulo Alcantara (SUSE) <pc@manguebit.com>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e77978de4765229e09c8fabcf4f8419ff367317f ]
We update ses->ip_addr whenever we do a session setup.
But this should happen only for primary channel in mchan
scenario.
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (SUSE) <pc@cjr.nz>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: bc962159e8e3 ("cifs: avoid race conditions with parallel reconnects")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 003587000276f81d0114b5ce773d80c119d8cb30 upstream.
The ioctl helper function nilfs_ioctl_wrap_copy(), which exchanges a
metadata array to/from user space, may copy uninitialized buffer regions
to user space memory for read-only ioctl commands NILFS_IOCTL_GET_SUINFO
and NILFS_IOCTL_GET_CPINFO.
This can occur when the element size of the user space metadata given by
the v_size member of the argument nilfs_argv structure is larger than the
size of the metadata element (nilfs_suinfo structure or nilfs_cpinfo
structure) on the file system side.
KMSAN-enabled kernels detect this issue as follows:
BUG: KMSAN: kernel-infoleak in instrument_copy_to_user
include/linux/instrumented.h:121 [inline]
BUG: KMSAN: kernel-infoleak in _copy_to_user+0xc0/0x100 lib/usercopy.c:33
instrument_copy_to_user include/linux/instrumented.h:121 [inline]
_copy_to_user+0xc0/0x100 lib/usercopy.c:33
copy_to_user include/linux/uaccess.h:169 [inline]
nilfs_ioctl_wrap_copy+0x6fa/0xc10 fs/nilfs2/ioctl.c:99
nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline]
nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290
nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343
__do_compat_sys_ioctl fs/ioctl.c:968 [inline]
__se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910
__ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Uninit was created at:
__alloc_pages+0x9f6/0xe90 mm/page_alloc.c:5572
alloc_pages+0xab0/0xd80 mm/mempolicy.c:2287
__get_free_pages+0x34/0xc0 mm/page_alloc.c:5599
nilfs_ioctl_wrap_copy+0x223/0xc10 fs/nilfs2/ioctl.c:74
nilfs_ioctl_get_info fs/nilfs2/ioctl.c:1173 [inline]
nilfs_ioctl+0x2402/0x4450 fs/nilfs2/ioctl.c:1290
nilfs_compat_ioctl+0x1b8/0x200 fs/nilfs2/ioctl.c:1343
__do_compat_sys_ioctl fs/ioctl.c:968 [inline]
__se_compat_sys_ioctl+0x7dd/0x1000 fs/ioctl.c:910
__ia32_compat_sys_ioctl+0x93/0xd0 fs/ioctl.c:910
do_syscall_32_irqs_on arch/x86/entry/common.c:112 [inline]
__do_fast_syscall_32+0xa2/0x100 arch/x86/entry/common.c:178
do_fast_syscall_32+0x37/0x80 arch/x86/entry/common.c:203
do_SYSENTER_32+0x1f/0x30 arch/x86/entry/common.c:246
entry_SYSENTER_compat_after_hwframe+0x70/0x82
Bytes 16-127 of 3968 are uninitialized
...
This eliminates the leak issue by initializing the page allocated as
buffer using get_zeroed_page().
Link: https://lkml.kernel.org/r/20230307085548.6290-1-konishi.ryusuke@gmail.com
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+132fdd2f1e1805fdc591@syzkaller.appspotmail.com
Link: https://lkml.kernel.org/r/000000000000a5bd2d05f63f04ae@google.com
Tested-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 39b291b86b5988bf8753c3874d5c773399d09b96 upstream.
ksmbd disconnect connection when mounting with vers=smb1.
ksmbd should send smb1 negotiate response to client for correct
unsupported error return. This patch add needed SMB1 macros and fill
NegProt part of the response for smb1 negotiate response.
Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Reviewed-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit b53e8cfec30b93c120623232ba27c041b1ef8f1a upstream.
ksmbd returned "Input/output error" when mounting with vers=2.0 to
ksmbd. It should return STATUS_NOT_SUPPORTED on unsupported smb2.0
dialect.
Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit be6f42fad5f5fd1fea9d562df82c38ad6ed3bfe9 upstream.
Steve reported that inactive sessions are terminated after a few
seconds. ksmbd terminate when receiving -EAGAIN error from
kernel_recvmsg(). -EAGAIN means there is no data available in timeout.
So ksmbd should keep connection with unlimited retries instead of
terminating inactive sessions.
Cc: stable@vger.kernel.org
Reported-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 728f14c72b71a19623df329c1c7c9d1452e56f1e upstream.
If vfs objects = streams_xattr in ksmbd.conf FILE_NAMED_STREAMS should
be set to Attributes in FS_ATTRIBUTE_INFORMATION. MacOS client show
"Format: SMB (Unknown)" on faked NTFS and no streams support.
Cc: stable@vger.kernel.org
Reported-by: Miao Lihua <441884205@qq.com>
Tested-by: Miao Lihua <441884205@qq.com>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
