It's counter-intuitive (and wrong) to put the block group _before_ the
final usage in submit_eb_page. Fix it by re-ordering the call to
btrfs_put_block_group after its final reference. Also fix a minor typo
in 'implies'
Fixes: be1a1d7a5d24 ("btrfs: zoned: finish fully written block group")
CC: stable@vger.kernel.org # 5.16+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Nikolay Borisov <nborisov@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The submit helper will always run bio_endio() on the bio if it fails to
submit, so cleaning up the bio just leads to a variety of use-after-free
and NULL pointer dereference bugs because we race with the endio
function that is cleaning up the bio. Instead just return BLK_STS_OK as
the repair function has to continue to process the rest of the pages,
and the endio for the repair bio will do the appropriate cleanup for the
page that it was given.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we fail to submit a bio for whatever reason, we may not have setup a
mirror_num for that bio. This means we shouldn't try to do the repair
workflow, if we do we'll hit an BUG_ON(!failrec->this_mirror) in
clean_io_failure. Instead simply skip the repair workflow if we have no
mirror set, and add an assert to btrfs_check_repairable() to make it
easier to catch what is happening in the future.
Reviewed-by: Boris Burkov <boris@bur.io>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
After commit 92082d40976ed0 ("btrfs: integrate page status update for
data read path into begin/end_page_read"), the 'nr' counter at
btrfs_do_readpage() is no longer used, we increment it but we never
read from it. So just remove it.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At btrfs_do_readpage(), if we get an error when trying to lookup for an
extent map, we end up marking the page with the error bit, clearing
the uptodate bit on it, and doing everything else that should be done.
However we return success (0) to the caller, when we should return the
error encoded in the extent map pointer. So fix that by returning the
error encoded in the pointer.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
At extent_io.c, in the read page and write page code paths, we are testing
if the return value from btrfs_get_extent() can be NULL. However that is
not possible, as btrfs_get_extent() always returns either an error pointer
or a (non-NULL) pointer to an extent map structure.
Everywhere else outside extent_io.c we never check for NULL, we always
treat any returned value as a non-NULL pointer if it does not encode an
error.
So check only for the IS_ERR() case at extent_io.c.
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In get_extent_skip_holes() we're checking the return of
btrfs_get_extent_fiemap() for an error pointer or NULL, but
btrfs_get_extent_fiemap() will never return NULL, only error pointers or
a valid extent_map.
The other caller of btrfs_get_extent_fiemap(), find_desired_extent(),
correctly only checks for error-pointers.
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
-----BEGIN PGP SIGNATURE-----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=Bd5z
-----END PGP SIGNATURE-----
Merge tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux
Pull btrfs fixes from David Sterba:
"A few more fixes for various problems that have user visible effects
or seem to be urgent:
- fix corruption when combining DIO and non-blocking io_uring over
multiple extents (seen on MariaDB)
- fix relocation crash due to premature return from commit
- fix quota deadlock between rescan and qgroup removal
- fix item data bounds checks in tree-checker (found on a fuzzed
image)
- fix fsync of prealloc extents after EOF
- add missing run of delayed items after unlink during log replay
- don't start relocation until snapshot drop is finished
- fix reversed condition for subpage writers locking
- fix warning on page error"
* tag 'for-5.17-rc6-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fallback to blocking mode when doing async dio over multiple extents
btrfs: add missing run of delayed items after unlink during log replay
btrfs: qgroup: fix deadlock between rescan worker and remove qgroup
btrfs: fix relocation crash due to premature return from btrfs_commit_transaction()
btrfs: do not start relocation until in progress drops are done
btrfs: tree-checker: use u64 for item data end to avoid overflow
btrfs: do not WARN_ON() if we have PageError set
btrfs: fix lost prealloc extents beyond eof after full fsync
btrfs: subpage: fix a wrong check on subpage->writers
Whenever we do any extent buffer operations we call
assert_eb_page_uptodate() to complain loudly if we're operating on an
non-uptodate page. Our overnight tests caught this warning earlier this
week
WARNING: CPU: 1 PID: 553508 at fs/btrfs/extent_io.c:6849 assert_eb_page_uptodate+0x3f/0x50
CPU: 1 PID: 553508 Comm: kworker/u4:13 Tainted: G W 5.17.0-rc3+ #564
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Workqueue: btrfs-cache btrfs_work_helper
RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
RSP: 0018:ffffa961440a7c68 EFLAGS: 00010246
RAX: 0017ffffc0002112 RBX: ffffe6e74453f9c0 RCX: 0000000000001000
RDX: ffffe6e74467c887 RSI: ffffe6e74453f9c0 RDI: ffff8d4c5efc2fc0
RBP: 0000000000000d56 R08: ffff8d4d4a224000 R09: 0000000000000000
R10: 00015817fa9d1ef0 R11: 000000000000000c R12: 00000000000007b1
R13: ffff8d4c5efc2fc0 R14: 0000000001500000 R15: 0000000001cb1000
FS: 0000000000000000(0000) GS:ffff8d4dbbd00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007ff31d3448d8 CR3: 0000000118be8004 CR4: 0000000000370ee0
Call Trace:
extent_buffer_test_bit+0x3f/0x70
free_space_test_bit+0xa6/0xc0
load_free_space_tree+0x1f6/0x470
caching_thread+0x454/0x630
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? lock_release+0x1f0/0x2d0
btrfs_work_helper+0xf2/0x3e0
? lock_release+0x1f0/0x2d0
? finish_task_switch.isra.0+0xf9/0x3a0
process_one_work+0x26d/0x580
? process_one_work+0x580/0x580
worker_thread+0x55/0x3b0
? process_one_work+0x580/0x580
kthread+0xf0/0x120
? kthread_complete_and_exit+0x20/0x20
ret_from_fork+0x1f/0x30
This was partially fixed by c2e39305299f01 ("btrfs: clear extent buffer
uptodate when we fail to write it"), however all that fix did was keep
us from finding extent buffers after a failed writeout. It didn't keep
us from continuing to use a buffer that we already had found.
In this case we're searching the commit root to cache the block group,
so we can start committing the transaction and switch the commit root
and then start writing. After the switch we can look up an extent
buffer that hasn't been written yet and start processing that block
group. Then we fail to write that block out and clear Uptodate on the
page, and then we start spewing these errors.
Normally we're protected by the tree lock to a certain degree here. If
we read a block we have that block read locked, and we block the writer
from locking the block before we submit it for the write. However this
isn't necessarily fool proof because the read could happen before we do
the submit_bio and after we locked and unlocked the extent buffer.
Also in this particular case we have path->skip_locking set, so that
won't save us here. We'll simply get a block that was valid when we
read it, but became invalid while we were using it.
What we really want is to catch the case where we've "read" a block but
it's not marked Uptodate. On read we ClearPageError(), so if we're
!Uptodate and !Error we know we didn't do the right thing for reading
the page.
Fix this by checking !Uptodate && !Error, this way we will not complain
if our buffer gets invalidated while we're using it, and we'll maintain
the spirit of the check which is to make sure we have a fully in-cache
block while we're messing with it.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Patch series "remove Xen tmem leftovers".
Since the removal of the Xen tmem driver in 2019, the cleancache hooks
are entirely unused, as are large parts of frontswap. This series
against linux-next (with the folio changes included) removes
cleancaches, and cuts down frontswap to the bits actually used by zswap.
This patch (of 13):
The cleancache subsystem is unused since the removal of Xen tmem driver
in commit 814bbf49dcd0 ("xen: remove tmem driver").
[akpm@linux-foundation.org: remove now-unreachable code]
Link: https://lkml.kernel.org/r/20211224062246.1258487-1-hch@lst.de
Link: https://lkml.kernel.org/r/20211224062246.1258487-2-hch@lst.de
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Juergen Gross <jgross@suse.com>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Cc: Konrad Rzeszutek Wilk <Konrad.wilk@oracle.com>
Cc: Hugh Dickins <hughd@google.com>
Cc: Seth Jennings <sjenning@redhat.com>
Cc: Dan Streetman <ddstreet@ieee.org>
Cc: Vitaly Wool <vitaly.wool@konsulko.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
The warnings were found by running scripts/kernel-doc, which is
caused by using 'make W=1'.
fs/btrfs/extent_io.c:3210: warning: Function parameter or member
'bio_ctrl' not described in 'btrfs_bio_add_page'
fs/btrfs/extent_io.c:3210: warning: Excess function parameter 'bio'
description in 'btrfs_bio_add_page'
fs/btrfs/extent_io.c:3210: warning: Excess function parameter
'prev_bio_flags' description in 'btrfs_bio_add_page'
fs/btrfs/space-info.c:1602: warning: Excess function parameter 'root'
description in 'btrfs_reserve_metadata_bytes'
fs/btrfs/space-info.c:1602: warning: Function parameter or member
'fs_info' not described in 'btrfs_reserve_metadata_bytes'
Note: this is fixing only the warnings regarding parameter list, the
first line is not strictly conforming to the kdoc format as the btrfs
codebase does not stick to that and keeps the first line more free form
(because it's only for internal use).
Reported-by: Abaci Robot <abaci@linux.alibaba.com>
Signed-off-by: Yang Li <yang.lee@linux.alibaba.com>
Reviewed-by: David Sterba <dsterba@suse.com>
[ add note ]
Signed-off-by: David Sterba <dsterba@suse.com>
Currently there is only one user for btrfs metadata readahead, and
that's scrub.
But even for the single user, it's not providing the correct
functionality it needs, as scrub needs reada for commit root, which
current readahead can't provide. (Although it's pretty easy to add such
feature).
Despite this, there are some extra problems related to metadata
readahead:
- Duplicated feature with btrfs_path::reada
- Partly duplicated feature of btrfs_fs_info::buffer_radix
Btrfs already caches its metadata in buffer_radix, while readahead
tries to read the tree block no matter if it's already cached.
- Poor layer separation
Metadata readahead works kinda at device level.
This is definitely not the correct layer it should be, since metadata
is at btrfs logical address space, it should not bother device at all.
This brings extra chance for bugs to sneak in, while brings
unnecessary complexity.
- Dead code
In the very beginning of scrub.c we have #undef DEBUG, rendering all
the debug related code useless and unable to test.
Thus here I purpose to remove the metadata readahead mechanism
completely.
[BENCHMARK]
There is a full benchmark for the scrub performance difference using the
old btrfs_reada_add() and btrfs_path::reada.
For the worst case (no dirty metadata, slow HDD), there could be a 5%
performance drop for scrub.
For other cases (even SATA SSD), there is no distinguishable performance
difference.
The number is reported scrub speed, in MiB/s.
The resolution is limited by the reported duration, which only has a
resolution of 1 second.
Old New Diff
SSD 455.3 466.332 +2.42%
HDD 103.927 98.012 -5.69%
Comprehensive test methodology is in the cover letter of the patch.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
REQ_OP_ZONE_APPEND can only work on zoned devices, so it is redundant to
check if the filesystem is zoned when REQ_OP_ZONE_APPEND is set as the
bio's bio_op.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Sink zone check into btrfs_repair_one_zone() so we don't need to do it
in all callers.
Also as btrfs_repair_one_zone() doesn't return a sensible error, make it
a boolean function and return false in case it got called on a non-zoned
filesystem and true on a zoned filesystem.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Encapsulate the inode lock needed for serializing the data relocation
writes on a zoned filesystem into a helper.
This streamlines the code reading flow and hides special casing for
zoned filesystems.
Reviewed-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We use @nr_written to record how many pages have been started by
btrfs_run_delalloc_range().
Currently there are only two cases that would populate @nr_written:
- Inline extent creation
- Compressed write
But both cases will also set @page_started to one.
In fact, in writepage_delalloc() we have the following code, showing
that @nr_written is really only utilized for above two cases:
/* did the fill delalloc function already unlock and start
* the IO?
*/
if (page_started) {
/*
* we've unlocked the page, so we can't update
* the mapping's writeback index, just update
* nr_to_write.
*/
wbc->nr_to_write -= nr_written;
return 1;
}
But for such cases, writepage_delalloc() will return 1, and exit
__extent_writepage() without going through __extent_writepage_io().
Thus this means, inside __extent_writepage_io(), we always get
@nr_written as 0.
So this patch is going to remove the unnecessary parameter from the
following functions:
- writepage_delalloc()
As @nr_written passed in is always the initial value 0.
Although inside that function, we still need a local @nr_written
to update wbc->nr_to_write.
- __extent_writepage_io()
As explained above, @nr_written passed in can only be 0.
This also means we can remove one update_nr_written() call.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Filipe reported a hang when we have errors on btrfs. This turned out to
be a side-effect of my fix c2e39305299f01 ("btrfs: clear extent buffer
uptodate when we fail to write it") which made it so we clear
EXTENT_BUFFER_UPTODATE on an eb when we fail to write it out.
Below is a paste of Filipe's analysis he got from using drgn to debug
the hang
"""
btree readahead code calls read_extent_buffer_pages(), sets ->io_pages to
a value while writeback of all pages has not yet completed:
--> writeback for the first 3 pages finishes, we clear
EXTENT_BUFFER_UPTODATE from eb on the first page when we get an
error.
--> at this point eb->io_pages is 1 and we cleared Uptodate bit from the
first 3 pages
--> read_extent_buffer_pages() does not see EXTENT_BUFFER_UPTODATE() so
it continues, it's able to lock the pages since we obviously don't
hold the pages locked during writeback
--> read_extent_buffer_pages() then computes 'num_reads' as 3, and sets
eb->io_pages to 3, since only the first page does not have Uptodate
bit set at this point
--> writeback for the remaining page completes, we ended decrementing
eb->io_pages by 1, resulting in eb->io_pages == 2, and therefore
never calling end_extent_buffer_writeback(), so
EXTENT_BUFFER_WRITEBACK remains in the eb's flags
--> of course, when the read bio completes, it doesn't and shouldn't
call end_extent_buffer_writeback()
--> we should clear EXTENT_BUFFER_UPTODATE only after all pages of
the eb finished writeback? or maybe make the read pages code
wait for writeback of all pages of the eb to complete before
checking which pages need to be read, touch ->io_pages, submit
read bio, etc
writeback bit never cleared means we can hang when aborting a
transaction, at:
btrfs_cleanup_one_transaction()
btrfs_destroy_marked_extents()
wait_on_extent_buffer_writeback()
"""
This is a problem because our writes are not synchronized with reads in
any way. We clear the UPTODATE flag and then we can easily come in and
try to read the EB while we're still waiting on other bio's to
complete.
We have two options here, we could lock all the pages, and then check to
see if eb->io_pages != 0 to know if we've already got an outstanding
write on the eb.
Or we can simply check to see if we have WRITE_ERR set on this extent
buffer. We set this bit _before_ we clear UPTODATE, so if the read gets
triggered because we aren't UPTODATE because of a write error we're
guaranteed to have WRITE_ERR set, and in this case we can simply return
-EIO. This will fix the reported hang.
Reported-by: Filipe Manana <fdmanana@suse.com>
Fixes: c2e39305299f01 ("btrfs: clear extent buffer uptodate when we fail to write it")
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
generic/484 fails sometimes with compression on because the write ends
up small enough that it goes into the btree. This means that we never
call mapping_set_error() on the inode itself, because the page gets
marked as fine when we inline it into the metadata. When the metadata
writeback happens we see it and abort the transaction properly and mark
the fs as readonly, however we don't do the mapping_set_error() on
anything. In syncfs() we will simply return 0 if the sb is marked
read-only, so we can't check for this in our syncfs callback. The only
way the error gets returned if we called mapping_set_error() on
something. Fix this by calling mapping_set_error() on the btree inode
mapping. This allows us to properly return an error on syncfs and pass
generic/484 with compression on.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Signed-off-by: David Sterba <dsterba@suse.com>
I got dmesg errors on generic/281 on our overnight fstests. Looking at
the history this happens occasionally, with errors like this
WARNING: CPU: 0 PID: 673217 at fs/btrfs/extent_io.c:6848 assert_eb_page_uptodate+0x3f/0x50
CPU: 0 PID: 673217 Comm: kworker/u4:13 Tainted: G W 5.16.0-rc2+ #469
Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.13.0-2.fc32 04/01/2014
Workqueue: btrfs-cache btrfs_work_helper
RIP: 0010:assert_eb_page_uptodate+0x3f/0x50
RSP: 0018:ffffae598230bc60 EFLAGS: 00010246
RAX: 0017ffffc0002112 RBX: ffffebaec4100900 RCX: 0000000000001000
RDX: ffffebaec45733c7 RSI: ffffebaec4100900 RDI: ffff9fd98919f340
RBP: 0000000000000d56 R08: ffff9fd98e300000 R09: 0000000000000000
R10: 0001207370a91c50 R11: 0000000000000000 R12: 00000000000007b0
R13: ffff9fd98919f340 R14: 0000000001500000 R15: 0000000001cb0000
FS: 0000000000000000(0000) GS:ffff9fd9fbc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f549fcf8940 CR3: 0000000114908004 CR4: 0000000000370ef0
Call Trace:
extent_buffer_test_bit+0x3f/0x70
free_space_test_bit+0xa6/0xc0
load_free_space_tree+0x1d6/0x430
caching_thread+0x454/0x630
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? rcu_read_lock_sched_held+0x12/0x60
? lock_release+0x1f0/0x2d0
btrfs_work_helper+0xf2/0x3e0
? lock_release+0x1f0/0x2d0
? finish_task_switch.isra.0+0xf9/0x3a0
process_one_work+0x270/0x5a0
worker_thread+0x55/0x3c0
? process_one_work+0x5a0/0x5a0
kthread+0x174/0x1a0
? set_kthread_struct+0x40/0x40
ret_from_fork+0x1f/0x30
This happens because we're trying to read from a extent buffer page that
is !PageUptodate. This happens because we will clear the page uptodate
when we have an IO error, but we don't clear the extent buffer uptodate.
If we do a read later and find this extent buffer we'll think its valid
and not return an error, and then trip over this warning.
Fix this by also clearing uptodate on the extent buffer when this
happens, so that we get an error when we do a btrfs_search_slot() and
find this block later.
CC: stable@vger.kernel.org # 5.4+
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The member btrfs_bio::logical is only initialized by two call sites:
- btrfs_repair_one_sector()
No corresponding site to utilize it.
- btrfs_submit_direct()
The corresponding site to utilize it is btrfs_check_read_dio_bio().
However for btrfs_check_read_dio_bio(), we can grab the file_offset from
btrfs_dio_private::file_offset directly.
Thus it turns out we don't really need that btrfs_bio::logical member at
all.
For btrfs_bio, the logical bytenr can be fetched from its
bio->bi_iter.bi_sector directly.
So let's just remove the member to save 8 bytes for structure btrfs_bio.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
We have a few flags that are inconsistently used to describe the fs in
different states of failure. As of 5963ffcaf383 ("btrfs: always abort
the transaction if we abort a trans handle") we will always set
BTRFS_FS_STATE_ERROR if we abort, so we don't have to check both ABORTED
and ERROR to see if things have gone wrong. Add a helper to check
BTRFS_FS_STATE_ERROR and then convert all checkers of FS_STATE_ERROR to
use the helper.
The TRANS_ABORTED bit check was added in af7227338135 ("Btrfs: clean up
resources during umount after trans is aborted") but is not actually
specific.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Josef Bacik <josef@toxicpanda.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
With experimental subpage compression enabled, a simple fsstress can
lead to self deadlock on page 720896:
mkfs.btrfs -f -s 4k $dev > /dev/null
mount $dev -o compress $mnt
$fsstress -p 1 -n 100 -w -d $mnt -v -s 1625511156
[CAUSE]
If we have a file layout looks like below:
0 32K 64K 96K 128K
|//| |///////////////|
4K
Then we run delalloc range for the inode, it will:
- Call find_lock_delalloc_range() with @delalloc_start = 0
Then we got a delalloc range [0, 4K).
This range will be COWed.
- Call find_lock_delalloc_range() again with @delalloc_start = 4K
Since find_lock_delalloc_range() never cares whether the range
is still inside page range [0, 64K), it will return range [64K, 128K).
This range meets the condition for subpage compression, will go
through async COW path.
And async COW path will return @page_started.
But that @page_started is now for range [64K, 128K), not for range
[0, 64K).
- writepage_dellloc() returned 1 for page [0, 64K)
Thus page [0, 64K) will not be unlocked, nor its page dirty status
will be cleared.
Next time when we try to lock page [0, 64K) we will deadlock, as there
is no one to release page [0, 64K).
This problem will never happen for regular page size as one page only
contains one sector. After the first find_lock_delalloc_range() call,
the @delalloc_end will go beyond @page_end no matter if we found a
delalloc range or not
Thus this bug only happens for subpage, as now we need multiple runs to
exhaust the delalloc range of a page.
[FIX]
Fix the problem by ensuring the delalloc range we ran at least started
inside @locked_page.
So that we will never get incorrect @page_started.
And to prevent such problem from happening again:
- Make find_lock_delalloc_range() return false if the found range is
beyond @end value passed in.
Since @end will be utilized now, add an ASSERT() to ensure we pass
correct @end into find_lock_delalloc_range().
This also means, for selftests we needs to populate @end before calling
find_lock_delalloc_range().
- New ASSERT() in find_lock_delalloc_range()
Now we will make sure the @start/@end passed in at least covers part
of the page.
- New ASSERT() in run_delalloc_range()
To make sure the range at least starts inside @locked page.
- Use @delalloc_start as proper cursor, while @delalloc_end is always
reset to @page_end.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Pages passed to __extent_writepage() are always locked, but they may be
locked by different functions.
There are two types of locked page for __extent_writepage():
- Page locked by plain lock_page()
It should not have any subpage::writers count.
Can be unlocked by unlock_page().
This is the most common locked page for __extent_writepage() called
inside extent_write_cache_pages() or extent_write_full_page().
Rarer cases include the @locked_page from extent_write_locked_range().
- Page locked by lock_delalloc_pages()
There is only one caller, all pages except @locked_page for
extent_write_locked_range().
In this case, we have to call subpage helper to handle the case.
So here we introduce a helper, btrfs_page_unlock_writer(), to allow
__extent_writepage() to unlock different locked pages.
And since for all other callers of __extent_writepage() their pages are
ensured to be locked by lock_page(), also add an extra check for
epd::extent_locked to unlock such pages directly.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two sites are not subpage compatible yet for
extent_write_locked_range():
- How @nr_pages are calculated
For subpage we can have the following range with 64K page size:
0 32K 64K 96K 128K
| |////|/////| |
In that case, although 96K - 32K == 64K, thus it looks like one page
is enough, but the range spans two pages, not one.
Fix it by doing proper round_up() and round_down() to calculate
@nr_pages.
Also add some extra ASSERT()s to ensure the range passed in is already
aligned.
- How the page end is calculated
Currently we just use cur + PAGE_SIZE - 1 to calculate the page end.
Which can't handle the above range layout, and will trigger ASSERT()
in btrfs_writepage_endio_finish_ordered(), as the range is no longer
covered by the page range.
Fix it by taking page end into consideration.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are several cleanups for extent_write_locked_range(), most of them
are pure cleanups, but with some preparation for future subpage support.
- Add a proper comment for which call sites are suitable
Unlike regular synchronized extent write back, if async COW or zoned
COW happens, we have all pages in the range still locked.
Thus for those (only) two call sites, we need this function to submit
page content into bios and submit them.
- Remove @mode parameter
All the existing two call sites pass WB_SYNC_ALL. No need for @mode
parameter.
- Better error handling
Currently if we hit an error during the page iteration loop, we
overwrite @ret, causing only the last error can be recorded.
Here we add @found_error and @first_error variable to record if we hit
any error, and the first error we hit.
So the first error won't get lost.
- Don't reuse @start as the cursor
We reuse the parameter @start as the cursor to iterate the range, not
a big problem, but since we're here, introduce a proper @cur as the
cursor.
- Remove impossible branch
Since all pages are still locked after the ordered extent is inserted,
there is no way that pages can get its dirty bit cleared.
Remove the branch where page is not dirty and replace it with an
ASSERT().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
If we remove the subpage limitation in add_ra_bio_pages(), then read a
compressed extent which has part of its range in next page, like the
following inode layout:
0 32K 64K 96K 128K
|<--------------|-------------->|
Btrfs will trigger ASSERT() in endio function:
assertion failed: atomic_read(&subpage->readers) >= nbits
------------[ cut here ]------------
kernel BUG at fs/btrfs/ctree.h:3431!
Internal error: Oops - BUG: 0 [#1] SMP
Workqueue: btrfs-endio btrfs_work_helper [btrfs]
Call trace:
assertfail.constprop.0+0x28/0x2c [btrfs]
btrfs_subpage_end_reader+0x148/0x14c [btrfs]
end_page_read+0x8c/0x100 [btrfs]
end_bio_extent_readpage+0x320/0x6b0 [btrfs]
bio_endio+0x15c/0x1dc
end_workqueue_fn+0x44/0x64 [btrfs]
btrfs_work_helper+0x74/0x250 [btrfs]
process_one_work+0x1d4/0x47c
worker_thread+0x180/0x400
kthread+0x11c/0x120
ret_from_fork+0x10/0x30
---[ end trace c8b7b552d3bb408c ]---
[CAUSE]
When we read the page range [0, 64K), we find it's a compressed extent,
and we will try to add extra pages in add_ra_bio_pages() to avoid
reading the same compressed extent.
But when we add such page into the read bio, it doesn't follow the
behavior of btrfs_do_readpage() to properly set subpage::readers.
This means, for page [64K, 128K), its subpage::readers is still 0.
And when endio is executed on both pages, since page [64K, 128K) has 0
subpage::readers, it triggers above ASSERT()
[FIX]
Function add_ra_bio_pages() is far from subpage compatible, it always
assume PAGE_SIZE == sectorsize, thus when it skip to next range it
always just skip PAGE_SIZE.
Make it subpage compatible by:
- Skip to next page properly when needed
If we find there is already a page cache, we need to skip to next page.
For that case, we shouldn't just skip PAGE_SIZE bytes, but use
@pg_index to calculate the next bytenr and continue.
- Only add the page range covered by current extent map
We need to calculate which range is covered by current extent map and
only add that part into the read bio.
- Update subpage::readers before submitting the bio
- Use proper cursor other than confusing @last_offset
- Calculate the missed threshold based on sector size
It's no longer using missed pages, as for 64K page size, we have at
most 3 pages to skip. (If aligned only 2 pages)
- Add ASSERT() to make sure our bytenr is always aligned
- Add comment for the function
Add a special note for subpage case, as the function won't really
work well for subpage cases.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In function __extent_writepage() we always pass page start to
@delalloc_start for writepage_delalloc().
Thus we don't really need @delalloc_start parameter as we can extract it
from @page.
Remove @delalloc_start parameter and make __extent_writepage() to
declare @page_start and @page_end as const.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Previously we had "struct btrfs_bio", which records IO context for
mirrored IO and RAID56, and "strcut btrfs_io_bio", which records extra
btrfs specific info for logical bytenr bio.
With "btrfs_bio" renamed to "btrfs_io_context", we are safe to rename
"btrfs_io_bio" to "btrfs_bio" which is a more suitable name now.
The struct btrfs_bio changes meaning by this commit. There was a
suggested name like btrfs_logical_bio but it's a bit long and we'd
prefer to use a shorter name.
This could be a concern for backports to older kernels where the
different meaning could possibly cause confusion or bugs. Comparing the
new and old structures, there's no overlap among the struct members so a
build would break in case of incorrect backport.
We haven't had many backports to bio code anyway so this is more of a
theoretical cause of bugs and a matter of precaution but we'll need to
keep the semantic change in mind.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The helper btrfs_bio_alloc() is almost the same as btrfs_io_bio_alloc(),
except it's allocating using BIO_MAX_VECS as @nr_iovecs, and initializes
bio->bi_iter.bi_sector.
However the naming itself is not using "btrfs_io_bio" to indicate its
parameter is "strcut btrfs_io_bio" and can be easily confused with
"struct btrfs_bio".
Considering assigned bio->bi_iter.bi_sector is such a simple work and
there are already tons of call sites doing that manually, there is no
need to do that in a helper.
Remove btrfs_bio_alloc() helper, and enhance btrfs_io_bio_alloc()
function to provide a fail-safe value for its @nr_iovecs.
And then replace all btrfs_bio_alloc() callers with
btrfs_io_bio_alloc().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The structure btrfs_bio is used by two different sites:
- bio->bi_private for mirror based profiles
For those profiles (SINGLE/DUP/RAID1*/RAID10), this structures records
how many mirrors are still pending, and save the original endio
function of the bio.
- RAID56 code
In that case, RAID56 only utilize the stripes info, and no long uses
that to trace the pending mirrors.
So btrfs_bio is not always bind to a bio, and contains more info for IO
context, thus renaming it will make the naming less confusing.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Don't allow more than one process to add pages to a relocation inode on
a zoned filesystem, otherwise we cannot guarantee the sequential write
rule once we're filling preallocated extents on a zoned filesystem.
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Function repair_io_failure() is no longer used out of extent_io.c since
commit 8b9b6f255485 ("btrfs: scrub: cleanup the remaining nodatasum
fixup code"), which removes the last external caller.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In preparation to fix a bug in btrfs_show_devname().
Convert fs_devices::latest_bdev type from struct block_device to struct
btrfs_device and, rename the member to fs_devices::latest_dev.
So that btrfs_show_devname() can use fs_devices::latest_dev::name.
Tested-by: Su Yue <l@damenly.su>
Signed-off-by: Anand Jain <anand.jain@oracle.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
If we have written to the zone capacity, the device automatically
deactivates the zone. Sync up block group side (the active BG list and
zone_is_active flag) with it.
We need to do it both on data BGs and metadata BGs. On data side, we add a
hook to btrfs_finish_ordered_io(). On metadata side, we use
end_extent_buffer_writeback().
To reduce excess lookup of a block group, we mark the last extent buffer in
a block group with EXTENT_BUFFER_ZONE_FINISH flag. This cannot be done for
data (ordered_extent), because the address may change due to
REQ_OP_ZONE_APPEND.
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Currently we use u16 bitmap to make 4k sectorsize work for 64K page
size.
But this u16 bitmap is not large enough to contain larger page size like
128K, nor is space efficient for 16K page size.
To handle both cases, here we pack all subpage bitmaps into a larger
bitmap, now btrfs_subpage::bitmaps[] will be the ultimate bitmap for
subpage usage.
Each sub-bitmap will has its start bit number recorded in
btrfs_subpage_info::*_start, and its bitmap length will be recorded in
btrfs_subpage_info::bitmap_nr_bits.
All subpage bitmap operations will be converted from using direct u16
operations to bitmap operations, with above *_start calculated.
For 64K page size with 4K sectorsize, this should not cause much
difference.
While for 16K page size, we will only need 1 unsigned long (u32) to
store all the bitmaps, which saves quite some space.
Furthermore, this allows us to support larger page size like 128K and
258K.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The existing calling convention of btrfs_alloc_subpage() is pretty
awful. Change it to a more common pattern by returning struct
btrfs_subpage directly and let the caller to determine if the call
succeeded.
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There are two call sites of btrfs_alloc_subpage():
- btrfs_attach_subpage()
We have ensured sectorsize is smaller than PAGE_SIZE
- alloc_extent_buffer()
We call btrfs_alloc_subpage() unconditionally.
The alloc_extent_buffer() forces us to check the sectorsize size against
page size inside btrfs_alloc_subpage().
Since the function name, btrfs_alloc_subpage(), already indicates it
should only get called for subpage cases, do the check in
alloc_extent_buffer() and add an ASSERT() in btrfs_alloc_subpage().
Reviewed-by: Nikolay Borisov <nborisov@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
btrfs_lookup_ordered_extent() is supposed to query the offset in a file
instead of the logical address. Pass the file offset from
submit_extent_page() to calc_bio_boundaries().
Also, calc_bio_boundaries() relies on the bio's operation flag, so move
the call site after setting it.
Fixes: 390ed29b817e ("btrfs: refactor submit_extent_page() to make bio and its flag tracing easier")
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Add support for fsverity in btrfs. To support the generic interface in
fs/verity, we add two new item types in the fs tree for inodes with
verity enabled. One stores the per-file verity descriptor and btrfs
verity item and the other stores the Merkle tree data itself.
Verity checking is done in end_page_read just before a page is marked
uptodate. This naturally handles a variety of edge cases like holes,
preallocated extents, and inline extents. Some care needs to be taken to
not try to verity pages past the end of the file, which are accessed by
the generic buffered file reading code under some circumstances like
reading to the end of the last page and trying to read again. Direct IO
on a verity file falls back to buffered reads.
Verity relies on PageChecked for the Merkle tree data itself to avoid
re-walking up shared paths in the tree. For this reason, we need to
cache the Merkle tree data. Since the file is immutable after verity is
turned on, we can cache it at an index past EOF.
Use the new inode ro_flags to store verity on the inode item, so that we
can enable verity on a file, then rollback to an older kernel and still
mount the file system and read the file. Since we can't safely write the
file anymore without ruining the invariants of the Merkle tree, we mark
a ro_compat flag on the file system when a file has verity enabled.
Acked-by: Eric Biggers <ebiggers@google.com>
Co-developed-by: Chris Mason <clm@fb.com>
Signed-off-by: Chris Mason <clm@fb.com>
Signed-off-by: Boris Burkov <boris@bur.io>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When btrfs_run_delalloc_range() failed, we will error out.
But there is a strange comment mentioning that
btrfs_run_delalloc_range() could have returned value >0 to indicate the
IO has already started.
Commit 40f765805f08 ("Btrfs: split up __extent_writepage to lower stack
usage") introduced the comment, but unfortunately at that time, we were
already using @page_started to indicate that case, and still return 0.
Furthermore, even if that comment was right (which is not), we would
return -EIO if the IO had already started.
By all means the comment is incorrect, just remove the comment along
with the dead check.
Just to be extra safe, add an ASSERT() in btrfs_run_delalloc_range() to
make sure we either return 0 or error, no positive return value.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
The offset and can never be negative use unsigned int instead of int
type for them.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chaitanya Kulkarni <chaitanya.kulkarni@wdc.com>
Signed-off-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running btrfs/160 in a loop for subpage with experimental
compression support, it has a high chance to crash (~20%):
BTRFS critical (device dm-7): panic in __btrfs_add_ordered_extent:238: inconsistency in ordered tree at offset 0 (errno=-17 Object already exists)
------------[ cut here ]------------
kernel BUG at fs/btrfs/ordered-data.c:238!
Internal error: Oops - BUG: 0 [#1] SMP
pc : __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
lr : __btrfs_add_ordered_extent+0x550/0x670 [btrfs]
Call trace:
__btrfs_add_ordered_extent+0x550/0x670 [btrfs]
btrfs_add_ordered_extent+0x2c/0x50 [btrfs]
run_delalloc_nocow+0x81c/0x8fc [btrfs]
btrfs_run_delalloc_range+0xa4/0x390 [btrfs]
writepage_delalloc+0xc0/0x1ac [btrfs]
__extent_writepage+0xf4/0x370 [btrfs]
extent_write_cache_pages+0x288/0x4f4 [btrfs]
extent_writepages+0x58/0xe0 [btrfs]
btrfs_writepages+0x1c/0x30 [btrfs]
do_writepages+0x60/0x110
__filemap_fdatawrite_range+0x108/0x170
filemap_fdatawrite_range+0x20/0x30
btrfs_fdatawrite_range+0x34/0x4dc [btrfs]
__btrfs_write_out_cache+0x34c/0x480 [btrfs]
btrfs_write_out_cache+0x144/0x220 [btrfs]
btrfs_start_dirty_block_groups+0x3ac/0x6b0 [btrfs]
btrfs_commit_transaction+0xd0/0xbb4 [btrfs]
btrfs_sync_fs+0x64/0x1cc [btrfs]
sync_fs_one_sb+0x3c/0x50
iterate_supers+0xcc/0x1d4
ksys_sync+0x6c/0xd0
__arm64_sys_sync+0x1c/0x30
invoke_syscall+0x50/0x120
el0_svc_common.constprop.0+0x4c/0xd4
do_el0_svc+0x30/0x9c
el0_svc+0x2c/0x54
el0_sync_handler+0x1a8/0x1b0
el0_sync+0x198/0x1c0
---[ end trace 336f67369ae6e0af ]---
[CAUSE]
For subpage case, we can have multiple sectors inside a page, this makes
it possible for __extent_writepage() to have part of its page submitted
before returning.
In btrfs/160, we are using dm-dust to emulate write error, this means
for certain pages, we could have everything running fine, but at the end
of __extent_writepage(), one of the submitted bios fails due to dm-dust.
Then the page is marked Error, and we change @ret from 0 to -EIO.
This makes the caller extent_write_cache_pages() to error out, without
submitting the remaining pages.
Furthermore, since we're erroring out for free space cache, it doesn't
really care about the error and will update the inode and retry the
writeback.
Then we re-run the delalloc range, and will try to insert the same
delalloc range while previous delalloc range is still hanging there,
triggering the above error.
[FIX]
The proper fix is to handle errors from __extent_writepage() properly,
by ending the remaining ordered extent.
But that fix needs the following changes:
- Know at exactly which sector the error happened
Currently __extent_writepage_io() works for the full page, can't
return at which sector we hit the error.
- Grab the ordered extent covering the failed sector
As a hotfix for subpage case, here we unify the error paths in
__extent_writepage().
In fact, the "if (PageError(page))" branch never get executed if @ret is
still 0 for non-subpage cases.
As for non-subpage case, we never submit current page in
__extent_writepage(), but only add current page into bio.
The bio can only get submitted in next page.
Thus we never get PageError() set due to IO failure, thus when we hit
the branch, @ret is never 0.
By simply removing that @ret assignment, we let subpage case ignore the
IO failure, thus only error out for fatal errors just like regular
sectorsize.
So that IO error won't be treated as fatal error not trigger the hanging
OE problem.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Current submit_extent_page() just checks if the current page range can
be fitted into current bio, and if not, submit then re-add.
But this behavior can't handle subpage case at all.
For subpage case, the problem is in the page size, 64K, which is also
the same size as stripe size.
This means, if we can't fit a full 64K into a bio, due to stripe limit,
then it won't fit into next bio without crossing stripe either.
The proper way to handle it is:
- Check how many bytes we can be put into current bio
- Put as many bytes as possible into current bio first
- Submit current bio
- Create a new bio
- Add the remaining bytes into the new bio
Refactor submit_extent_page() so that it does the above iteration.
The main loop inside submit_extent_page() will look like this:
cur = pg_offset;
while (cur < pg_offset + size) {
u32 offset = cur - pg_offset;
int added;
if (!bio_ctrl->bio) {
/* Allocate new bio if needed */
}
/* Add as many bytes into the bio */
added = btrfs_bio_add_page();
if (added < size - offset) {
/* The current bio is full, submit it */
}
cur += added;
}
Also, since we're doing new bio allocation deep inside the main loop,
extract that code into a new helper, alloc_new_bio().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
When running fsstress with subpage RW support, there are random
BUG_ON()s triggered with the following trace:
kernel BUG at fs/btrfs/file-item.c:667!
Internal error: Oops - BUG: 0 [#1] SMP
CPU: 1 PID: 3486 Comm: kworker/u13:2 5.11.0-rc4-custom+ #43
Hardware name: Radxa ROCK Pi 4B (DT)
Workqueue: btrfs-worker-high btrfs_work_helper [btrfs]
pstate: 60000005 (nZCv daif -PAN -UAO -TCO BTYPE=--)
pc : btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
lr : btrfs_csum_one_bio+0x400/0x4e0 [btrfs]
Call trace:
btrfs_csum_one_bio+0x420/0x4e0 [btrfs]
btrfs_submit_bio_start+0x20/0x30 [btrfs]
run_one_async_start+0x28/0x44 [btrfs]
btrfs_work_helper+0x128/0x1b4 [btrfs]
process_one_work+0x22c/0x430
worker_thread+0x70/0x3a0
kthread+0x13c/0x140
ret_from_fork+0x10/0x30
[CAUSE]
Above BUG_ON() means there is some bio range which doesn't have ordered
extent, which indeed is worth a BUG_ON().
Unlike regular sectorsize == PAGE_SIZE case, in subpage we have extra
subpage dirty bitmap to record which range is dirty and should be
written back.
This means, if we submit bio for a subpage range, we do not only need to
clear page dirty, but also need to clear subpage dirty bits.
In __extent_writepage_io(), we will call btrfs_page_clear_dirty() for
any range we submit a bio.
But there is loophole, if we hit a range which is beyond i_size, we just
call btrfs_writepage_endio_finish_ordered() to finish the ordered io,
then break out, without clearing the subpage dirty.
This means, if we hit above branch, the subpage dirty bits are still
there, if other range of the page get dirtied and we need to writeback
that page again, we will submit bio for the old range, leaving a wild
bio range which doesn't have ordered extent.
[FIX]
Fix it by always calling btrfs_page_clear_dirty() in
__extent_writepage_io().
Also to avoid such problem from happening again, add a new assert,
btrfs_page_assert_not_dirty(), to make sure both page dirty and subpage
dirty bits are cleared before exiting __extent_writepage_io().
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
In btrfs_do_readpage(), we never reset @this_bio_flag after we hit a
compressed extent.
This is fine, as for PAGE_SIZE == sectorsize case, we can only have one
sector for one page, thus @this_bio_flag will only be set at most once.
But for subpage case, after hitting a compressed extent, @this_bio_flag
will always have EXTENT_BIO_COMPRESSED bit, even we're reading a regular
extent.
This will lead to various read errors, and causing new ASSERT() in
incoming subpage patches, which adds more strict check in
btrfs_submit_compressed_read().
Fix it by declaring @this_bio_flag inside the main loop and reset its
value for each iteration.
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Since commit d75855b4518b ("btrfs: Remove
extent_io_ops::writepage_start_hook") removes the writepage_start_hook()
and adds btrfs_writepage_cow_fixup() function, there is no need to
follow the old hook parameters.
Remove the @start and @end hook, since currently the fixup check is full
page check, it doesn't need @start and @end hook.
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
There used to be a patch in the original series for zoned support which
limited the extent size to max_zone_append_size, but this patch has been
dropped somewhere around v9.
We've decided to go the opposite direction, instead of limiting extents
in the first place we split them before submission to comply with the
device's limits.
Remove the related code, btrfs_fs_info::max_zone_append_size and
btrfs_zoned_device_info::max_zone_append_size.
This also removes the workaround for dm-crypt introduced in
1d68128c107a ("btrfs: zoned: fail mount if the device does not support
zone append") because the fix has been merged as f34ee1dce642 ("dm
crypt: Fix zoned block device support").
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
[BUG]
There is a very rare ASSERT() triggering during full fstests run for
subpage rw support.
No other reproducer so far.
The ASSERT() gets triggered for metadata read in
btrfs_page_set_uptodate() inside end_page_read().
[CAUSE]
There is still a small race window for metadata only, the race could
happen like this:
T1 | T2
------------------------------------+-----------------------------
end_bio_extent_readpage() |
|- btrfs_validate_metadata_buffer() |
| |- free_extent_buffer() |
| Still have 2 refs |
|- end_page_read() |
|- if (unlikely(PagePrivate()) |
| The page still has Private |
| | free_extent_buffer()
| | | Only one ref 1, will be
| | | released
| | |- detach_extent_buffer_page()
| | |- btrfs_detach_subpage()
|- btrfs_set_page_uptodate() |
The page no longer has Private|
>>> ASSERT() triggered <<< |
This race window is super small, thus pretty hard to hit, even with so
many runs of fstests.
But the race window is still there, we have to go another way to solve
it other than relying on random PagePrivate() check.
Data path is not affected, as it will lock the page before reading,
while unlocking the page after the last read has finished, thus no race
window.
[FIX]
This patch will fix the bug by repurposing btrfs_subpage::readers.
Now btrfs_subpage::readers will be a member shared by both metadata and
data.
For metadata path, we don't do the page unlock as metadata only relies
on extent locking.
At the same time, teach page_range_has_eb() to take
btrfs_subpage::readers into consideration.
So that even if the last eb of a page gets freed, page::private won't be
detached as long as there still are pending end_page_read() calls.
By this we eliminate the race window, this will slight increase the
metadata memory usage, as the page may not be released as frequently as
usual. But it should not be a big deal.
The code got introduced in ("btrfs: submit read time repair only for
each corrupted sector"), but the fix is in a separate patch to keep the
problem description and the crash is rare so it should not hurt
bisectability.
Signed-off-by: Qu Wegruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
__extent_writepage_io() function originally just iterates through all
the extent maps of a page, and submits any regular extents.
This is fine for sectorsize == PAGE_SIZE case, as if a page is dirty, we
need to submit the only sector contained in the page.
But for subpage case, one dirty page can contain several clean sectors
with at least one dirty sector.
If __extent_writepage_io() still submit all regular extent maps, it can
submit data which is already written to disk.
And since such already written data won't have corresponding ordered
extents, it will trigger a BUG_ON() in btrfs_csum_one_bio().
Change the behavior of __extent_writepage_io() by finding the first
dirty byte in the page, and only submit the dirty range other than the
full extent.
Since we're also here, also modify the following calls to be subpage
compatible:
- SetPageError()
- end_page_writeback()
Tested-by: Ritesh Harjani <riteshh@linux.ibm.com> # [ppc64]
Tested-by: Anand Jain <anand.jain@oracle.com> # [aarch64]
Signed-off-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
