To simplify the code related to 'ret' variable in cmd_config(),
initialize 'ret' with -1 instead of 0 and use goto to perform resource
release at the end of the function, setting ret to zero just before the
out_err label, as usual in the kernel sources.
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671202-20495-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
show_spec_config() and set_config() can be called multiple times
in the loop in cmd_config().
However, The error cases of them wasn't checked, so fix it.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Taeung Song <treeze.taeung@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/r/1497671197-20450-1-git-send-email-treeze.taeung@gmail.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The -D/--graph-depth option is to set max graph depth. The following
example traces max 2-depth of page fault handler.
$ sudo perf ftrace -G __do_page_fault -D 2 -- hello
...
0) | __do_page_fault() {
0) 0.063 us | down_read_trylock();
0) 0.251 us | find_vma();
0) 5.374 us | handle_mm_fault();
0) 0.054 us | up_read();
0) 7.463 us | }
...
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-4-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'perf ftrace' command fails to reset tracer after finishing
recording like below:
$ sudo perf ftrace -v hello
write 'nop' to tracing/current_tracer failed: Device or resource busy
...
This is because the trace_pipe file is open in pager process. Move the
pager setup to before opening the file.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Fixes: 583359646fde ("perf ftrace: Use pager for displaying result")
Link: http://lkml.kernel.org/r/20170618142302.25390-2-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
It'd be better for debugging to show an error message when it fails to
setup ftrace for some reason.
Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: kernel-team@lge.com
Link: http://lkml.kernel.org/r/20170618142302.25390-1-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The idea here is to make AutoFDO easier in cloud environment with ASLR.
It's easiest to show how this is useful by example. I built a small test
akin to "while(1) { do_nothing(); }" where the do_nothing function is
loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution of this program with perf record -b.
Using the existing "brstack,dso", we get absolute addresses that are
affected by ASLR, and could be different on different hosts. The address
does not uniquely identify a branch/target in the binary:
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Using the existing "brstacksym,dso" is a little better, because the
symbol plus offset and dso name *does* uniquely identify a branch/target
in the binary. Ultimately, however, AutoFDO wants a simple offset into
the binary, so we'd have to undo all the work perf did to symbolize in
the first place:
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
With the new "brstackoff,dso" we get what we need: a simple offset into a
specific dso/binary that uniquely identifies a branch/target:
$ perf script -F brstackoff,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-2-marksan@fb.com
[ Updated documentation about 'brstackoff' using text from above ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Perf script can report the dso for "addr" and "ip" fields.
This adds the same support for the "brstack" and "brstacksym" fields.
This can be helpful for AutoFDO: we can ignore LBR entries unless the
source and target address are both in the target module we are about to
build.
I built a small test akin to "while(1) { do_nothing(); }" where the
do_nothing function is loaded from a dso:
$ cat burncpu.cpp
#include <dlfcn.h>
int main() {
void* handle = dlopen("./dso.so", RTLD_LAZY);
if (!handle) return -1;
typedef void (*fp)();
fp do_nothing = (fp) dlsym(handle, "do_nothing");
while(1) {
do_nothing();
}
}
$ cat dso.cpp
extern "C" void do_nothing() {}
$ cat build.sh
#!/bin/bash
g++ -shared dso.cpp -o dso.so
g++ burncpu.cpp -o burncpu -ldl
I sampled the execution with perf record -b. Using the new perf script
functionality I can easily find cases where there was a transition from one
dso to another:
$ perf record -a -b -- sleep 5
[ perf record: Woken up 55 times to write data ]
[ perf record: Captured and wrote 18.815 MB perf.data (43593 samples) ]
$ perf script -F brstack,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
0x7f967139b6aa(/tmp/burncpu/dso.so)/0x4006b1(/tmp/burncpu/exe)/P/-/-/0
$ perf script -F brstacksym,dso | sed 's/\/0 /\/0\n/g' | grep burncpu | grep dso.so | head -n 1
do_nothing+0x5(/tmp/burncpu/dso.so)/main+0x44(/tmp/burncpu/exe)/P/-/-/0
Signed-off-by: Mark Santaniello <marksan@fb.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170619163825.2012979-1-marksan@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The 'if' keyword is a define that expands to complex code when
CONFIG_PROFILE_ALL_BRANCHES is selected, which causes a 'perf test LLVM'
failure like:
$ ./perf test LLVM
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: FAILED!
35.4: Compile source for BPF relocation : Skip
The only affected test case is bpf-script-test-prologue.c
because it uses kernel headers and has 'if' inside.
This patch undefines 'if' to make it passes perf test.
More detailed analysis from a message in this thread, also by Wang:
The problem is caused by following relocation information:
$ readelf -a ./llvmsubtest3
...
[ 5] _ftrace_branch PROGBITS 0000000000000000 00000260
00000000000000a0 0000000000000000 WA 0 0 4
...
Relocation section '.relfunc=null_lseek file->f_mode offset orig' at
offset 0x490 contains 4 entries:
Offset Info Type Sym. Value Sym. Name
000000000038 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
0000000000b0 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
000000000128 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
0000000001c0 000b00000001 unrecognized: 1 0000000000000000 _ftrace_branch
Relocation section '.rel_ftrace_branch' at offset 0x4d0 contains 8 entries:
Offset Info Type Sym. Value Sym. Name
000000000000 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000008 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000028 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000030 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000050 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000058 000100000001 unrecognized: 1 0000000000000015 .L.str
000000000078 000200000001 unrecognized: 1 0000000000000000 .L__func__.bpf_func__n
000000000080 000100000001 unrecognized: 1 0000000000000015 .L.str
...
So I think the failure is because you enabled CONFIG_PROFILE_ALL_BRANCHES.
I can reproduce your buggy result by selecting
CONFIG_PROFILE_ALL_BRANCHES in my kbuild:
$ ./perf test LLVM
35: LLVM search and compile :
35.1: Basic BPF llvm compile : Ok
35.2: kbuild searching : Ok
35.3: Compile source for BPF prologue generation: FAILED!
35.4: Compile source for BPF relocation : Skip
Simply undef CONFIG_PROFILE_ALL_BRANCHES in clang opts not working
because it is introduced by "#include <uapi/linux/fs.h>", which override
cmdline options. So I think the best way is to undefine 'if' inside BPF
script.
Reported-and-Tested-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/20170620183203.2517-1-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In annotate browser, we will add support to check fused instructions.
While this is x86-specific feature so we need the annotate browser to
know what the arch it runs on.
symbol__disassemble() has figured out the arch. This patch just lets the
arch return from symbol__disassemble and save the arch in annotate
browser.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/1497840958-4759-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
These defines were probably dragged in from sampling support in earlier
patches. They can be put back when needed.
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20170616112339.3fb6986e4ff33e353008244b@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The cs_etm_evsel variable is guaranteed to be set at this point in
cs_etm_recording_options().
Signed-off-by: Kim Phillips <kim.phillips@arm.com>
Acked-by: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: linux-arm-kernel@lists.infradead.org
Link: http://lkml.kernel.org/r/20170615125521.80cc128dc856bc1f2e61b730@arm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to use a specific
alignment, making tools/ look more like kernel source code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-8jiem6ubg9rlpbs7c2p900no@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to not insert alignment
paddings in a struct, making tools/ look more like kernel source code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-byp46nr7hsxvvyc9oupfb40q@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler not to inline a function
and to make tools/ source code look like kernel code.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-bis4pqxegt6gbm5dlqs937tn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Instead of defining __unused or redefining __maybe_unused.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-4eleto5pih31jw1q4dypm9pf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to perform scanf like
argument validation.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-yzqrhfjrn26lqqtwf55egg0h@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To have a more compact way to ask the compiler to perform printf like
vargargs validation.
v2: Fixed up build on arm, squashing a patch by Kim Phillips, thanks!
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kim Phillips <kim.phillips@arm.com>
Cc: Mathieu Poirier <mathieu.poirier@linaro.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-dopkqmmuqs04cxzql0024nnu@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The code mistakenly prints the local perf results for the remote test
so the script reports identical results for both directions. Fix this
by ensuring we print the remote result.
Signed-off-by: Logan Gunthorpe <logang@deltatee.com>
Fixes: a9c59ef77458 ("ntb_test: Add a selftest script for the NTB subsystem")
Acked-by: Allen Hubbe <Allen.Hubbe@dell.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
To have a more compact way to specify that a function doesn't return,
instead of the open coded:
__attribute__((noreturn))
And use it instead of the tools/perf/ specific variation, NORETURN.
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/n/tip-l0y144qzixcy5t4c6i7pdiqj@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
With 'perf script' it is common that we just want to add or remove a field.
Currently this requires figuring out the long list of default fields and
specifying them first, and then adding/removing the new field.
This patch adds a new + - syntax to merely add or remove fields,
that allows more succint and clearer command lines
For example to remove the comm field from PMU samples:
Previously
$ perf script -F tid,cpu,time,event,sym,ip,dso,period | head -1
swapper 0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
with the new syntax
perf script -F -comm | head -1
0 [000] 504345.383126: 1 cycles: ffffffff90060c66 native_write_msr ([kernel.kallsyms])
The new syntax cannot be mixed with normal overriding.
v2: Fix example in description. Use tid vs pid. No functional changes.
v3: Don't skip initialization when user specified explicit type.
v4: Rebase. Remove empty line.
Committer testing:
# perf record -a usleep 1
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 1.748 MB perf.data (14 samples) ]
Without a explicit field list specified via -F, defaults to:
# perf script | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Which is equivalent to:
# perf script -F comm,tid,cpu,time,period,event,ip,sym,dso | head -2
perf 6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
swapper 0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
So if we want to remove the comm, as in your original example, we would have to
figure out the default field list and remove ' comm' from it:
# perf script -F tid,cpu,time,period,event,ip,sym,dso | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
With your patch this becomes simpler, one can remove fields by prefixing them
with '-':
# perf script -F -comm | head -2
6338 [000] 18467.058607: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
0 [001] 18467.058617: 1 cycles: ffffffff89060c36 native_write_msr (/lib/modules/4.11.0-rc8+/build/vmlinux)
#
Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Tested-by: Milian Wolff <milian.wolff@kdab.com>
Link: http://lkml.kernel.org/r/20170602154810.15875-1-andi@firstfloor.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
The annotate browser is divided into 2 frames. Left frame contains 3
columns (some platforms only have one column).
For example:
│26 int compute_flag()
│27 {
22.80 1.20 │ sub $0x8,%rsp
│25 int i;
│
│27 i = rand() % 2;
22.78 1.20 1 │ → callq rand@plt
While it's hard for user to understand what the data is.
This patch adds the titles "Percent", "IPC" and "Cycle" on columns.
Percent IPC Cycle │
│25 __attribute__((noinline))
│26 int compute_flag()
│27 {
22.80 1.20 │ sub $0x8,%rsp
│25 int i;
│
│27 i = rand() % 2;
22.78 1.20 1 │ → callq rand@plt
The titles are displayed at row 0 of annotate browser if row 0 doesn't
have values of percent, ipc and cycle.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-3-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
In annotate_browser_write(),
if (dl->offset != -1 && percent_max != 0.0) {
if (percent_max != 0.0) {
...
}
...
}
The second check of (percent_max != 0.0) is not necessary, remove it.
Signed-off-by: Yao Jin <yao.jin@linux.intel.com>
Acked-by: Milian Wolff <milian.wolff@kdab.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Yao Jin <yao.jin@linux.intel.com>
Link: http://lkml.kernel.org/r/1493909895-9668-2-git-send-email-yao.jin@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull perf fixes from Thomas Gleixner:
"Three fixes for the perf user space side:
- Fix the probing of precise_ip level, which got broken recently for
x86.
- Unbreak the ARCH=x86_64 build
- Report module before trying to unwind into the module code, which
avoids broken stack frames displayed"
* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf unwind: Report module before querying isactivation in dwfl unwind
perf tools: Fix build with ARCH=x86_64
perf evsel: Fix probing of precise_ip level for default cycles event
Pull objtool fix from Thomas Gleixner:
"A single fix which adds fortify_panic to the list of no return
functions"
* 'core-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Add fortify_panic as __noreturn function
CONFIG_FORTIFY_SOURCE=y implements fortify_panic() as a __noreturn function,
so objtool needs to know about it too.
Suggested-by: Daniel Micay <danielmicay@gmail.com>
Tested-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/1497532835-32704-1-git-send-email-jpoimboe@redhat.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Make membarrier test names more informative.
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make the three tests that did use the old ksft_ext_skip()
(breakpoints/breakpoint_test_arm64, breakpoints/step_after_suspend_test,
and membarrier_test) use the new one, with an output for the
reason for skipping all the tests.
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make ksft_exit_skip() input an optional message string as the reason
for skipping all the tests and outputs it prior to exiting.
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The root cause of panic is the num_pm of nfit_test1 is wrong.
Though 1 is specified for num_pm at nfit_test_init(), it must be 2,
because nfit_test1->spa_set[] array has 2 elements.
Since the array is smaller than expected, the driver breaks other area.
(it is often the link list of devres).
As a result, panic occurs like the following example.
CPU: 4 PID: 2233 Comm: lt-libndctl Tainted: G O 4.12.0-rc1+ #12
RIP: 0010:__list_del_entry_valid+0x6c/0xa0
Call Trace:
release_nodes+0x76/0x260
devres_release_all+0x3c/0x50
device_release_driver_internal+0x159/0x200
device_release_driver+0x12/0x20
bus_remove_device+0xfd/0x170
device_del+0x1e8/0x330
platform_device_del+0x28/0x90
platform_device_unregister+0x12/0x30
nfit_test_exit+0x2a/0x93b [nfit_test]
Cc: <stable@vger.kernel.org>
Signed-off-by: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull networking fixes from David Miller:
1) The netlink attribute passed in to dev_set_alias() is not
necessarily NULL terminated, don't use strlcpy() on it. From
Alexander Potapenko.
2) Fix implementation of atomics in arm64 bpf JIT, from Daniel
Borkmann.
3) Correct the release of netdevs and driver private data in certain
circumstances.
4) Sanitize netlink message length properly in decnet, from Mateusz
Jurczyk.
5) Don't leak kernel data in rtnl_fill_vfinfo() netlink blobs. From
Yuval Mintz.
6) Hash secret is never initialized in ipv6 ILA translation code, from
Arnd Bergmann. I guess those clang warnings about unused inline
functions are useful for something!
7) Fix endian selection in bpf_endian.h, from Daniel Borkmann.
8) Sanitize sockaddr length before dereferncing any fields in AF_UNIX
and CAIF. From Mateusz Jurczyk.
9) Fix timestamping for GMAC3 chips in stmmac driver, from Mario
Molitor.
10) Do not leak netdev on dev_alloc_name() errors in mac80211, from
Johannes Berg.
11) Fix locking in sctp_for_each_endpoint(), from Xin Long.
12) Fix wrong memset size on 32-bit in snmp6, from Christian Perle.
13) Fix use after free in ip_mc_clear_src(), from WANG Cong.
14) Fix regressions caused by ICMP rate limiting changes in 4.11, from
Jesper Dangaard Brouer.
* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (91 commits)
i40e: Fix a sleep-in-atomic bug
net: don't global ICMP rate limit packets originating from loopback
net/act_pedit: fix an error code
net: update undefined ->ndo_change_mtu() comment
net_sched: move tcf_lock down after gen_replace_estimator()
caif: Add sockaddr length check before accessing sa_family in connect handler
qed: fix dump of context data
qmi_wwan: new Telewell and Sierra device IDs
net: phy: Fix MDIO_THUNDER dependencies
netconsole: Remove duplicate "netconsole: " logging prefix
igmp: acquire pmc lock for ip_mc_clear_src()
r8152: give the device version
net: rps: fix uninitialized symbol warning
mac80211: don't send SMPS action frame in AP mode when not needed
mac80211/wpa: use constant time memory comparison for MACs
mac80211: set bss_info data before configuring the channel
mac80211: remove 5/10 MHz rate code from station MLME
mac80211: Fix incorrect condition when checking rx timestamp
mac80211: don't look at the PM bit of BAR frames
i40e: fix handling of HW ATR eviction
...
1. Add the TAP13 header
2. remove variable data from the test description line
3. move the plan count to the end of the file, for consistency with
other kselftests
4. convert memory data from diagnostic (comment) format, to a YAML block
Signed-off-by: Tim Bird <tim.bird@sony.com>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Dynamically allocate memory so that JIT images larger than the size of
the statically allocated array can be handled.
Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add test cases in test_verifier and test_progs.
Negative tests are added in test_verifier as well.
The test in test_progs will compare the value of narrower ctx field
load result vs. the masked value of normal full-field load result,
and will fail if they are not the same.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Currently, verifier will reject a program if it contains an
narrower load from the bpf context structure. For example,
__u8 h = __sk_buff->hash, or
__u16 p = __sk_buff->protocol
__u32 sample_period = bpf_perf_event_data->sample_period
which are narrower loads of 4-byte or 8-byte field.
This patch solves the issue by:
. Introduce a new parameter ctx_field_size to carry the
field size of narrower load from prog type
specific *__is_valid_access validator back to verifier.
. The non-zero ctx_field_size for a memory access indicates
(1). underlying prog type specific convert_ctx_accesses
supporting non-whole-field access
(2). the current insn is a narrower or whole field access.
. In verifier, for such loads where load memory size is
less than ctx_field_size, verifier transforms it
to a full field load followed by proper masking.
. Currently, __sk_buff and bpf_perf_event_data->sample_period
are supporting narrowing loads.
. Narrower stores are still not allowed as typical ctx stores
are just normal stores.
Because of this change, some tests in verifier will fail and
these tests are removed. As a bonus, rename some out of bound
__sk_buff->cb access to proper field name and remove two
redundant "skb cb oob" tests.
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: Yonghong Song <yhs@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
With commit: 0a943cb10ce78 (tools build: Add HOSTARCH Makefile variable)
when building for ARCH=x86_64, ARCH=x86_64 is passed to perf instead of
ARCH=x86, so the perf build process searchs header files from
tools/arch/x86_64/include, which doesn't exist.
The following build failure is seen:
In file included from util/event.c:2:0:
tools/include/uapi/linux/mman.h:4:27: fatal error: uapi/asm/mman.h: No such file or directory
compilation terminated.
Fix this issue by using SRCARCH instead of ARCH in perf, just like the
main kernel Makefile and tools/objtool's.
Signed-off-by: Jiada Wang <jiada_wang@mentor.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Eugeniu Rosca <erosca@de.adit-jv.com>
Cc: Jan Stancek <jstancek@redhat.com>
Cc: Masami Hiramatsu <mhiramat@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Ravi Bangoria <ravi.bangoria@linux.vnet.ibm.com>
Cc: Rui Teng <rui.teng@linux.vnet.ibm.com>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 0a943cb10ce7 ("tools build: Add HOSTARCH Makefile variable")
Link: http://lkml.kernel.org/r/1491793357-14977-2-git-send-email-jiada_wang@mentor.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Since commit 18e7a45af91a ("perf/x86: Reject non sampling events with
precise_ip") returns -EINVAL for sys_perf_event_open() with an attribute
with (attr.precise_ip > 0 && attr.sample_period == 0), just like is done
in the routine used to probe the max precise level when no events were
passed to 'perf record' or 'perf top', i.e.:
perf_evsel__new_cycles()
perf_event_attr__set_max_precise_ip()
The x86 code, in x86_pmu_hw_config(), which is called all the way from
sys_perf_event_open() did, starting with the aforementioned commit:
/* There's no sense in having PEBS for non sampling events: */
if (!is_sampling_event(event))
return -EINVAL;
Which makes it fail for cycles:ppp, cycles:pp and cycles:p, always using
just the non precise cycles variant.
To make sure that this is the case, I tested it, before this patch,
with:
# perf probe -L x86_pmu_hw_config
<x86_pmu_hw_config@/home/acme/git/linux/arch/x86/events/core.c:0>
0 int x86_pmu_hw_config(struct perf_event *event)
1 {
2 if (event->attr.precise_ip) {
<SNIP>
17 if (event->attr.precise_ip > precise)
18 return -EOPNOTSUPP;
/* There's no sense in having PEBS for non sampling events: */
21 if (!is_sampling_event(event))
22 return -EINVAL;
}
<SNIP>
# perf probe x86_pmu_hw_config:22
Added new events:
probe:x86_pmu_hw_config (on x86_pmu_hw_config:22)
probe:x86_pmu_hw_config_1 (on x86_pmu_hw_config:22)
You can now use it in all perf tools, such as:
perf record -e probe:x86_pmu_hw_config_1 -aR sleep 1
# perf trace -e perf_event_open,probe:x86_pmu_hwconfig*/max-stack=16/ perf record usleep 1
0.000 ( 0.015 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.015 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.000 ( 0.021 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
0.023 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.025 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.023 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
0.028 ( 0.002 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8ba110, cpu: -1, group_fd: -1 ) ...
0.030 ( ): probe:x86_pmu_hw_config:(ffffffff9c0065e1))
x86_pmu_hw_config ([kernel.kallsyms])
hsw_hw_config ([kernel.kallsyms])
x86_pmu_event_init ([kernel.kallsyms])
perf_try_init_event ([kernel.kallsyms])
perf_event_alloc ([kernel.kallsyms])
SYSC_perf_event_open ([kernel.kallsyms])
sys_perf_event_open ([kernel.kallsyms])
do_syscall_64 ([kernel.kallsyms])
return_from_SYSCALL_64 ([kernel.kallsyms])
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
perf_evsel__new_cycles (/home/acme/bin/perf)
perf_evlist__add_default (/home/acme/bin/perf)
cmd_record (/home/acme/bin/perf)
run_builtin (/home/acme/bin/perf)
handle_internal_command (/home/acme/bin/perf)
0.028 ( 0.004 ms): perf/4150 ... [continued]: perf_event_open()) = -1 EINVAL Invalid argument
41.018 ( 0.012 ms): perf/4150 perf_event_open(attr_uptr: 0x7ffebc8b5dd0, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.065 ( 0.011 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.080 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c7db78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
41.103 ( 0.010 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4
41.115 ( 0.006 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5
41.122 ( 0.004 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6
41.128 ( 0.008 ms): perf/4150 perf_event_open(attr_uptr: 0x3c4e748, pid: 4151 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8
[ perf record: Woken up 1 times to write data ]
[ perf record: Captured and wrote 0.017 MB perf.data (2 samples) ]
#
I.e. that return -EINVAL in x86_pmu_hw_config() is hit three times.
So fix it by just setting attr.sample_period
Now, after this patch:
# perf trace --max-stack=2 -e perf_event_open,probe:x86_pmu_hw_config* perf record usleep 1
[ perf record: Woken up 1 times to write data ]
0.000 ( 0.017 ms): perf/8469 perf_event_open(attr_uptr: 0x7ffe36c27d10, pid: -1, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_event_open_cloexec_flag (/home/acme/bin/perf)
0.050 ( 0.031 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evlist__config (/home/acme/bin/perf)
0.092 ( 0.040 ms): perf/8469 perf_event_open(attr_uptr: 0x24ebb78, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evlist__config (/home/acme/bin/perf)
0.143 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, cpu: -1, group_fd: -1 ) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_event_attr__set_max_precise_ip (/home/acme/bin/perf)
0.161 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), group_fd: -1, flags: FD_CLOEXEC) = 4
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.171 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 5
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.180 ( 0.007 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 6
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
0.190 ( 0.005 ms): perf/8469 perf_event_open(attr_uptr: 0x24bc748, pid: 8470 (perf), cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 8
syscall (/usr/lib64/libc-2.24.so)
perf_evsel__open (/home/acme/bin/perf)
[ perf record: Captured and wrote 0.017 MB perf.data (7 samples) ]
#
The probe one called from perf_event_attr__set_max_precise_ip() works
the first time, with attr.precise_ip = 3, wit hthe next ones being the
per cpu ones for the cycles:ppp event.
And here is the text from a report and alternative proposed patch by
Thomas-Mich Richter:
---
On s390 the counter and sampling facility do not support a precise IP
skid level and sometimes returns EOPNOTSUPP when structure member
precise_ip in struct perf_event_attr is not set to zero.
On s390 commnd 'perf record -- true' fails with error EOPNOTSUPP. This
happens only when no events are specified on command line.
The functions called are
...
--> perf_evlist__add_default
--> perf_evsel__new_cycles
--> perf_event_attr__set_max_precise_ip
The last function determines the value of structure member precise_ip by
invoking the perf_event_open() system call and checking the return code.
The first successful open is the value for precise_ip.
However the value is determined without setting member sample_period and
indicates no sampling.
On s390 the counter facility and sampling facility are different. The
above procedure determines a precise_ip value of 3 using the counter
facility. Later it uses the sampling facility with a value of 3 and
fails with EOPNOTSUPP.
---
v2: Older compilers (e.g. gcc 4.4.7) don't support referencing members
of unnamed union members in the container struct initialization, so
move from:
struct perf_event_attr attr = {
...
.sample_period = 1,
};
to right after it as:
struct perf_event_attr attr = {
...
};
attr.sample_period = 1;
v3: We need to reset .sample_period to 0 to let the users of
perf_evsel__new_cycles() to properly setup attr.sample_period or
attr.sample_freq. Reported by Ingo Molnar.
Reported-and-Acked-by: Thomas-Mich Richter <tmricht@linux.vnet.ibm.com>
Acked-by: Hendrik Brueckner <brueckner@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 18e7a45af91a ("perf/x86: Reject non sampling events with precise_ip")
Link: http://lkml.kernel.org/n/tip-yv6nnkl7tzqocrm0hl3x7vf1@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Make the step_after_suspend test output in the TAP13 format by using the
TAP13 output functions defined in kselftest.h
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make the breakpoints test output in the TAP13 format by using the
TAP13 output functions defined in kselftest.h
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Make the membarrier test output in the TAP13 format by using the
TAP13 output functions defined in kselftest.h
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
Add TAP13 conformat output functions to kselftest.h.
Also add exit functions that output TAP13 exiting text, as well as
functions to keep track of testing progress.
Signed-off-by: Paul Elder <paul.elder@pitt.edu>
Signed-off-by: Alice Ferrazzi <alice.ferrazzi@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: Shuah Khan <shuahkh@osg.samsung.com>
The selftests depend on using the shell exit code as a mean of
detecting the success or failure of test-binary executed. The
appropiate output "[PASS]" or "[FAIL]" in generated by
tools/testing/selftests/lib.mk.
Notice that the exit code is masked with 255. Thus, be careful if
using the number of errors as the exit code, as 256 errors would be
seen as a success.
There are two standard defined exit(3) codes:
/usr/include/stdlib.h
#define EXIT_FAILURE 1 /* Failing exit status. */
#define EXIT_SUCCESS 0 /* Successful exit status. */
Fix test_verifier.c to not use the negative value of variable
"results", but instead return EXIT_FAILURE.
Fix test_align.c and test_progs.c to actually use exit codes, before
they were always indicating success regardless of results.
Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Reviewed-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch adds a USB3 HCD to an existing USB2 HCD and provides
the support of SuperSpeed, in case the device can only be enumerated
with SuperSpeed.
The bulk of the added code in usb3_bos_desc and hub_control to support
SuperSpeed is borrowed from the commit 1cd8fd2887e162ad ("usb: gadget:
dummy_hcd: add SuperSpeed support").
With this patch, each vhci will have VHCI_HC_PORTS HighSpeed ports
and VHCI_HC_PORTS SuperSpeed ports.
Suggested-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
A vhci struct is added as the platform-specific data to the vhci
platform device, in order to get the vhci by its platform device.
This is done in vhci_hcd_init().
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
In parse_status(), all nports number of idev's are initiated to
0 by memset(), it is simply wrong, because parse_status() reads
the status sys file one by one, therefore, it can only update the
according vhci_driver->idev's for it to parse.
Reviewed-by: Krzysztof Opasiak <k.opasiak@samsung.com>
Signed-off-by: Yuyang Du <yuyang.du@intel.com>
Acked-by: Shuah Khan <shuahkh@osg.samsung.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
