commit 90ae93d8affc1061cd87ca8ddd9a838c7d31a158 upstream.
The current interconnect provider registration interface is inherently
racy as nodes are not added until the after adding the provider. This
can specifically cause racing DT lookups to fail.
Switch to using the new API where the provider is not registered until
after it has been fully initialised.
Fixes: 62feb14ee8 ("interconnect: qcom: Consolidate interconnect RPM support")
Fixes: 30c8fa3ec6 ("interconnect: qcom: Add MSM8916 interconnect provider driver")
Cc: stable@vger.kernel.org # 5.7
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-9-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit bc463201f60803fa6bf2741d59441031cd0910e4 upstream.
Make sure to clean up and release resources properly also in case probe
fails when populating child devices.
Fixes: e39bf2972c ("interconnect: icc-rpm: Support child NoC device probe")
Cc: stable@vger.kernel.org # 5.17
Reviewed-by: Konrad Dybcio <konrad.dybcio@linaro.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20230306075651.2449-7-johan+linaro@kernel.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
icc_provider_del() already emits an error message on failure. In this
case letting .remove() return the corresponding error code results in
another error message and the device is removed anyhow. (See
platform_remove().)
So ignore the return value of icc_provider_del() and return 0
unconditionally.
This is a preparation for making platform remove callbacks return void.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Link: https://lore.kernel.org/r/20220718121409.171773-3-u.kleine-koenig@pengutronix.de
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This commit uses buckets for support bandwidth and clock rates. It
introduces a new function qcom_icc_bus_aggregate() to calculate the
aggregate average and peak bandwidths for every bucket, and also it
calculates the maximum value of aggregated average bandwidth across all
buckets.
The maximum aggregated average is used to calculate the final bandwidth
requests. And we can set the clock rate per bucket, we use SLEEP bucket
as default bucket if a platform doesn't enable the interconnect path
tags in DT binding; otherwise, we use WAKE bucket to set active clock
and use SLEEP bucket for other clocks. So far we don't use AMC bucket.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-6-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The current interconnect rpm driver uses a single aggregate bandwidth to
calculate the clock rates for both active and sleep clocks; therefore,
it has no chance to separate bandwidth requests for these two kinds of
clocks.
This patch studies the implementation from interconnect rpmh driver to
support multiple buckets. The rpmh driver provides three buckets for
AMC, WAKE, and SLEEP; this driver only needs to use WAKE and SLEEP
buckets, but we keep the same way with rpmh driver, this can allow us to
reuse the DT binding and avoid to define duplicated data structures.
This patch introduces two callbacks: qcom_icc_pre_bw_aggregate() is used
to clean up bucket values before aggregate bandwidth requests, and
qcom_icc_bw_aggregate() is to aggregate bandwidth for buckets.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-5-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This commit changes to use callback qcom_icc_xlate_extended(). This
is a preparation for population path tags from the interconnect DT
binding, it doesn't introduce functionality change for the existed DT
binding without path tags.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Link: https://lore.kernel.org/r/20220712015929.2789881-4-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Make it possible to set destination as well as source bandwidth. If the
*dst pointer is non-NULL. Right now it appears that we never make the
destination bw allocation call, which is inconsistent with the downstream
way of doing this.
Signed-off-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Link: https://lore.kernel.org/r/20220707093823.1691870-1-bryan.odonoghue@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This patch set is to address two clock rate setting issues.
The first patch is to fix a potential cached clock rate mismatching
issue, the issue can lead to the clock rate is missed to be set. Note,
since this potential issue requires specific time window and certain
condition (consumers need to request the same bandwidth) to produce,
the patch is based on analysis but not a real trace log.
The second patch is an extension to cache clock rates for active and
sleep clocks separately, with this change it gives us possibility to set
active and sleep clock with different clock rates.
* icc-rpm
interconnect: qcom: icc-rpm: Fix for cached clock rate
interconnect: qcom: icc-rpm: Cache every clock rate
Link: https://lore.kernel.org/r/20220416031029.693211-1-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
The cached clock rate is used for all bus clocks, thus it has the
assumption that all interconnect clock rates are always same, this
causes trouble if we want to set different clock rates separately.
This patch is to allocate a clock rate array to cache every clock
rate.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220416031029.693211-3-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
All nodes within an interconnect bus share interconnect bus clocks, but
every node has its own cached clock rate values, this can lead to
unexpected clock rate setting.
Let's see an example shown in below, in this case, a bus have two nodes
A and B, and its buswidth is 8:
step1: vote bandwidth 1600M for node(A):
aggregated(bw) = 1600M
qcom_icc_node(A)->rate = 1600M / 8 = 200MHz
step2: vote bandwidth 1600M for node(B):
aggregated(bw) = 1600M + 1600M = 3200M
qcom_icc_node(B)->rate = 3200M / 8 = 400MHz
step3: unvote bandwidth 1600M for node(A)
aggregated(bw) = 3200M - 1600M = 1600M
target_clock = 1600M / 8 = 200MHz
The problem is in step 3, the calculated target clock rate is 200MHz,
which equals to the cached clock rate in node(A) (See step 1),
unfortunately, qcom_icc_set() skips to set the new clock rate 200MHz in
this case, so the bus clock rate will continue to stay at 400MHz.
To resolve the issue, one possible solution is to invoke clk_get_rate()
to retrieve the clock rates on the fly, thus we can totally remove the
cached clock rates. But after review the code, many bus clock has set
the flag CLK_GET_RATE_NOCACHE, this results in the retrieving bus clock
rate is time cost for iterating parent clock nodes, and even challenges
bus clock drivers to provide recalc_rate() callbacks.
So this patch moves the cached rates into structure qcom_icc_provider,
we use it as a central place to maintain bus clock handlers and cached
clock rate, therefore, it can smoothly dismiss the mismatching problem.
Signed-off-by: Leo Yan <leo.yan@linaro.org>
Link: https://lore.kernel.org/r/20220416031029.693211-2-leo.yan@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Pointers to struct qcom_icc_node (and similar structures) are not
modified, so they can be made const for safety. The contents of struct
qcom_icc_node must stay non-const.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20220412102623.227607-2-krzysztof.kozlowski@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
As shown in downstream DT[1], the System NoC of QCM2290 is modelled
using 4 fab/noc devices: sys_noc + qup_virt + mmnrt_virt + mmrt_virt.
Among those 3 virtual devices, qup is owned by RPM and has no regmap
resource, while mmnrt and mmrt are owned by AP and share the same
regmap as sys_noc. So it's logical to represent these virtual devices
as child nodes of sys_noc in DT, so that such configuration can be
supported with a couple of changes on qnoc_probe():
- If there are child nodes, populate them.
- If the device descriptor has .regmap_cfg but there is no IOMEM
resource for the device, use parent's regmap.
[1] https://android.googlesource.com/kernel/msm-extra/devicetree/+/refs/tags/android-11.0.0_r0.56/qcom/scuba-bus.dtsi
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20211215002324.1727-4-shawn.guo@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
This series adds a driver for interconnects on MSM8996. This fixes some rare display underflows
and provides a slight heat reduction.
* icc-msm8996
dt-bindings: interconnect: Combine SDM660 bindings into RPM schema
interconnect: icc-rpm: Add support for bus power domain
dt-bindings: interconnect: Add Qualcomm MSM8996 DT bindings
interconnect: qcom: Add MSM8996 interconnect provider driver
Link: https://lore.kernel.org/r/20211021132329.234942-1-y.oudjana@protonmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Using icc-rpm on ARM32 currently results in clk_set_rate() errors during
boot, e.g. "bus clk_set_rate error: -22". This is very similar to commit
7381e27b1e ("interconnect: qcom: msm8974: Prevent integer overflow in rate")
where the u64 is converted to a signed long during clock rate rounding,
resulting in an overflow on 32-bit platforms.
Let's fix it similarly by making sure that the rate does not exceed
LONG_MAX. Such high clock rates will surely result in the maximum
frequency of the bus anyway.
Signed-off-by: Stephan Gerhold <stephan@gerhold.net>
Link: https://lore.kernel.org/r/20211206114542.45325-1-stephan@gerhold.net
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add support for attaching to a power domain. This is required
for Aggregate 0 NoC on MSM8996, which is powered by a GDSC.
Signed-off-by: Yassine Oudjana <y.oudjana@protonmail.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Tested-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org> #db820c
Link: https://lore.kernel.org/r/20211021132329.234942-3-y.oudjana@protonmail.com
Signed-off-by: Georgi Djakov <djakov@kernel.org>
SDM660 driver expects to have QoS registers at the beginning of NoC
address space (sdm660 platform shifts NoC base address). Add support for
using QoS register offset, so that other platforms do not have to change
existing device trees.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-6-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Other RPM interconnect drivers might also use QoS support. Move AP-owned
nodes support from SDM660 driver to common icc-rpm.c.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Tested-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-5-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
All icc-rpm drivers use the same set of bus clocks. Move handling of bus
clocks to qnoc_probe. This both simplifies the code and allows using
qnoc_probe as device's probe function.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@somainline.org>
Reviewed-by: Marijn Suijten <marijn.suijten@somainline.org>
Tested-by: Shawn Guo <shawn.guo@linaro.org>
Link: https://lore.kernel.org/r/20210903232421.1384199-2-dmitry.baryshkov@linaro.org
Signed-off-by: Georgi Djakov <djakov@kernel.org>
Add slave RPM ID to assist with identifying incorrect RPM config.
Signed-off-by: Benjamin Li <benl@squareup.com>
Reviewed-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20210205015205.22947-2-benl@squareup.com
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
Add RPM based interconnect driver implements the set and aggregate
functionalities that translates bandwidth requests into RPM messages.
These modules provide a common set of functionalities for all
Qualcomm RPM based interconnect providers and should help reduce code
duplication when adding new providers.
Signed-off-by: Jun Nie <jun.nie@linaro.org>
Link: https://lore.kernel.org/r/20201204075345.5161-2-jun.nie@linaro.org
Signed-off-by: Georgi Djakov <georgi.djakov@linaro.org>
